ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • AERODYNAMICS
  • Animals
  • 1970-1974  (1,256)
  • 1925-1929  (1)
Collection
Years
Year
  • 101
    Publication Date: 2011-08-16
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 102
    Publication Date: 2011-08-16
    Description: A model based on Lighthill's theory for predicting aerodynamic noise from a turbulent shear flow is developed. This model is a generalization of the one developed by Ribner. It does not require that the turbulent correlations factor into space and time-dependent parts. It replaces his assumption of isotropic turbulence by the more realistic one of axisymmetric turbulence. In the course of the analysis, a hierarchy of equations is developed wherein each succeeding equation involves more assumptions than the preceding equation but requires less experimental information for its use. The implications of the model for jet noise are discussed. It is shown that for the particular turbulence data considered anisotropy causes the high-frequency self-noise to be beamed downstream.
    Keywords: AERODYNAMICS
    Type: Acoustical Society of America; vol. 54
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 103
    Publication Date: 2011-08-16
    Description: For the interaction of shock waves with turbulent boundary layers, obtained experimental three-dimensional separation results and correlations with earlier two-dimensional and three-dimensional data are presented. It is shown that separation occurs much earlier for turbulent three-dimensional than for two-dimensional flow at hypersonic speeds.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 104
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: A mathematical model of the vortex flow over a slender sharp-edged delta wing is proposed, and is shown to provide good agreement with the experiment. Although the technique requires experimental data in the form of the vortex core locations, it does account for the previously ignored mass entrainment of the vortex core.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 105
    Publication Date: 2011-08-16
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 106
    Publication Date: 2011-08-16
    Description: A modified, bidirectional shooting method is presented for solving boundary-layer equations under conditions of massive blowing. Unlike the conventional shooting method, which is unstable when the blowing rate increases, the proposed method avoids the unstable direction and is capable of solving complex boundary-layer problems involving mass and energy balance on the surface.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 107
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: The method of Fourier transforms is used to determine the kernel function which relates the pressure on a lifting surface to the prescribed downwash within the framework of Dowell's (1971) shear flow model. This model is intended to improve upon the potential flow aerodynamic model by allowing for the aerodynamic boundary layer effects neglected in the potential flow model. For simplicity, incompressible, steady flow is considered. The proposed method is illustrated by deriving known results from potential flow theory.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 108
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Schlieren photographs of shock interference heating for space shuttles
    Keywords: AERODYNAMICS
    Type: NASA, WASHINGTON SPACE TRANSPORTATION SYSTEM TECHNOL. SYMP., VOL. 1 JUL. 1970; P 338-389
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 109
    Publication Date: 2011-08-16
    Description: Boundary layer transition on lifting reentry vehicles at high angles of attack
    Keywords: AERODYNAMICS
    Type: NASA, WASHINGTON SPACE TRANSPORTATION SYSTEM TECHNOL. SYMP., VOL. 1 JUL. 1970; P 445-462
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 110
    Publication Date: 2011-08-16
    Description: Wind tunnel tests of aerodynamic stability, boundary layer transition, and heat transfer in space shuttle orbiters
    Keywords: AERODYNAMICS
    Type: SPACE TRANSPORTATION SYSTEM TECHNOL. SYMP., VOL. 1 JUL. 1970; P 142-193
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 111
    Publication Date: 2011-08-16
    Description: Supersonic skin friction measurements in grit type boundary layer transition trips with zero heat transfer
    Keywords: AERODYNAMICS
    Type: ; SEARCH(
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 112
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Radiation effects on viscous hypersonic low density stagnation flow using two layer model, calculating flow field and heat transfer coefficient
    Keywords: AERODYNAMICS
    Type: ; ACE(
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 113
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Missile oscillations in plane during pitching moment hysteresis, discussing test coefficients suitability for predicting motion
    Keywords: AERODYNAMICS
    Type: ; RO(
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 114
    Publication Date: 2011-08-16
    Description: Off-centerline heating on lee surface of supersonic delta wing with separation and vortex initiation at leading edge
    Keywords: AERODYNAMICS
    Type: ; ADEMIE DES SCIENCES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 115
    Publication Date: 2011-08-16
    Description: Adiabatic flow coefficient in supersonic nozzle with choked flow conducted over throat Reynolds number range
    Keywords: AERODYNAMICS
    Type: ; ADEMIE DES SCIENCES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 116
    Publication Date: 2011-08-16
    Description: Electron concentration profiles in blunt nose vehicle shock layer during atmospheric near orbital entry at high altitudes, using finite rate chemistry
    Keywords: AERODYNAMICS
    Type: ; ADEMIE DES SCIENCES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 117
    Publication Date: 2011-08-16
    Description: Results are presented of a procedure for estimating stability and control parameters from flight data, by using maximum likelihood methods employing an interactive computer system, which was established at the NASA Langley Research Center. Problems encountered are discussed.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 49-76
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 118
    Publication Date: 2011-08-16
    Description: A maximum likelihood estimator for a linear system with state and observation noise is developed to determine stability and control derivatives from flight data obtained in the presence of turbulence. The formulation for the longitudinal short-period mode is presented briefly, including a special case that greatly simplifies the problem if the measurement noise on one signal is negligible. The effectiveness and accuracy of the technique are assessed by applying it first to simulated flight data, in which the true parameter values and state noise are known, then to actual flight data obtained in turbulence. The results are compared with data obtained in smooth air and with wind-tunnel data. The complete maximum likelihood estimator, which accounts for both state and observation noise, is shown to give the most accurate estimate of the stability and control derivatives from flight data obtained in turbulence. It is superior to the techniques that ignores state noise and to the simplified method that neglects the measurement noise on the angle-of-attack signal.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 77-114
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 119
    Publication Date: 2011-08-16
    Description: Two methods for extracting stability derivatives from flight data are compared. A modified Newton-Raphson quasilinearization minimization technique and a digital-analog (hybrid) matching technique were used to analyze the same data maneuvers obtained from two aircraft. About 70 maneuvers from an F-111E aircraft were analyzed over a Mach number range of 0.3 to 2.0 and an angle of attack range of 3 to 19 degrees. About 20 maneuvers were analyzed for the X-24A lifting body at Mach numbers of 0.5, 0.8, and 0.9, and an angle of attack range of 4 to 13 degrees. Stability derivatives were extracted from these maneuvers and the results from the two techniques, along with wind tunnel results, were compared.
    Keywords: AERODYNAMICS
    Type: NASA. Flight Res. Center Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 43-48
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 120
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: A pseudo-one-dimensional model of the supersonic combustion ramjet engine cycle is revised on the basis of recent (additional) data obtained from combustor tests. The data were generated in a simple nonreacting system which produces shock structures and shock/boundary layer interactions analogous to those observed at the entrance of supersonic combustors. It is shown that the revised model provides better descriptions of the wall pressure distributions and the overall shock pressure rises for the available test data.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 10; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 121
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: A transonic flow solution is presented for configurations with span-to-length ratios of order one. The angles of attack are sufficiently large to produce lift effects that are either dominant or comparable to the thickness effects. The analysis is performed with the aid of the method of matched asymptotic expansions. The results obtained are compared with data reported by Cheng and Hafez (1972).
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; May 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 122
    Publication Date: 2011-08-16
    Description: Brief review of the operational principle and capability of the high-Reynolds-number wind tunnel developed over the last few years. Its test medium is stored in a Ludwieg tube and held there by means of a diaphragm. When the diaphragm is broken, a rearward-facing centered rarefaction fan propagates upstream through the test section and nozzle into the supply tube, and the useful run time is bounded by the reflected rarefaction wave and the starting shock wave caused by choking at the nozzle. The operating problems center around the ability of model and sting support systems to withstand the loads and to meet the instrumentation requirements. Evaluation tests have shown that satisfactory force and moment measurements can be obtained in this facility.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 123
    Publication Date: 2011-08-16
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 124
    Publication Date: 2011-08-16
    Description: Direct skin friction measurements obtained on the wall of a Mach 19.8 nozzle are presented. These measurements of skin friction and values deduced from the profile data are compared with predictions from a finite difference theory and also with several 'flat-plate' prediction methods for skin friction.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 125
    Publication Date: 2011-08-16
    Description: Investigation of the Taylor instability relative to the dynamical instability whose presence in the shock layer on a spacecraft entering the Jovian atmosphere is to be expected because of the difference in velocity across the shear layer. Presented calculations show that the Taylor instability at the interface between shock-heated freestream gas and ablation products is inconsequential in comparison to the shear layer instability.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 126
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: The transition Reynolds number for shear layers produced by interactions between weak and strong shock waves is determined on the basis of experiments performed in a 20-in. (Mach 6) and an 11-in. (Mach 6.9) hypersonic tunnel. A variable angle wedge was used to generate a planar shock wave which interacted with the bow wave of a blunt body. An average value of the transition length (defined as the length along the shear layer from the shock interaction to the point where turbulence became visible on schlieren photographs) was used to determine the transition Reynolds number.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 127
    Publication Date: 2011-08-16
    Description: Correlations are given of measured pressure and heat-transfer peaks for shock/boundary-layer interactions and shear layer attachment on configurations with both two- and three-dimensional interactions. The peak values were obtained from an investigation of shock interference heating on hemispheres, a 30-deg included angle wedge, and a 2.54-cm-diam cylindrical leading-edge fin model. The investigation covers data for Mach numbers of 6 and 20 over freestream Reynolds numbers ranging from (3.3 to 25.6) million per meter, and specific heat ratios of 1.4 and 1.67.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 128
    Publication Date: 2011-08-16
    Description: Boundary-layer transition on 5- and 15-deg half-angle cones was studied as a function of angle of attack (ranging from 0 to 20 deg) in a 3.5 ft hypersonic wind tunnel at a freestream Mach number of 7.4. It is shown that the influence of the angle of attack on the transition Reynolds number is a function of the meridian angle. On the windward ray of the 15-deg cone, transition Reynolds numbers show an initial slight increase and then a decrease with increasing angle of attack; leeward-ray Reynolds numbers for this cone decrease rapidly with angle of attack. Windward-ray transition Reynolds numbers increase monotonically with angle of attack on the 5-deg cone, but the effect of the angle of attack on the leeward ray is the same as for the 15-deg cone.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 129
    Publication Date: 2011-08-16
    Description: The results of Murman and Krupp (1971) are used to develop a procedure for computing a transonic flow about a finite lifting wing. A small disturbance equation describing the velocity potential of three-dimensional wings is solved in the process. The procedure is applied to a wing with a symmetric biconvex airfoil section in a zero-incidence subsonic flow, to a supersonic rectangular lifting wing with a sharp leading edge and to a subcritical nonlifting rectangular wing with a blunt leading edge.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 130
    Publication Date: 2011-08-16
    Description: The inverse technique is used to obtain a mathematically and physically consistent solution of the flowfield in a nozzle from the mass generation surface through the supersonic region. The inverse method employs an assumed centerline function which is of the Cauchy type in that the values and the derivatives of the function are known. Since the Cauchy boundary conditions can give rise to numerical instabilities, the governing gasdynamic equations for rotational steady flow were transformed into a form which puts the geometry into a rectangular shape, and which spaces the network of interior points more finely in regions of the greatest gradients of the dependent variables. For arbitrarily specified centerline data, the solution of the governing flow equations may not exist, and if it does it may not depend continuously on the data.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 131
    Publication Date: 2011-08-16
    Description: Wall static pressure measurements and performance parameters are presented for axisymmetric supersonic nozzles with relatively steep convergent sections and comparatively small radius-of-curvature throats. The nozzle walls were essentially adiabatic. These results are compared with those obtained in other nozzles tested previously to appraise the influence of contraction shape on performance. Both the flow coefficient and the thrust were less than the corresponding values for one-dimensional, isentropic, plane flow for both the axial and radial inflow nozzles considered, but the specific impulse, the most important performance parameter, was found to be relatively unchanged. The thrust decrement for the axial inflow nozzles was established primarily by the shape of the contraction section, and could be estimated reasonably well from a conical sink flow consideration. The radial inflow nozzle has a potential advantage from a cooling point of view if used in a rocket engine.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 132
    Publication Date: 2011-08-16
    Description: Experimental results suggest that the boundary-layer mean profiles in hypersonic flows may be highly transitional in the outer part of the boundary layer before the transition process is detected at the surface. Means of determining the initial location where the transition process begins in the outer part of the boundary layer are considered.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; May 1972
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 133
    Publication Date: 2011-08-16
    Description: A first-order theory of the fluctuating lift and drag coefficients associated with the aerodynamically induced motions of rising and falling spherical wind sensors is developed. The equations of motion of a sensor are perturbed about an equilibrium state in which the buoyancy force balances the mean vertical drag force. It is shown that, to within first order in perturbation quantities, the aerodynamic lift force is confined to the horizontal, and the fluctuating drag force associated with fluctuations in the drag coefficient acts along the vertical. The perturbation equations are transformed with Fourier-Stieltjes integrals. The resulting equations lead to relationships between the power spectra of the aerodynamically induced velocity components and the spectra of the fluctuating lift and drag coefficients.
    Keywords: AERODYNAMICS
    Type: Journal of Applied Meteorology; 11; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 134
    Publication Date: 2011-08-16
    Description: Description of a correlation, derived from water tank measurements in the wake of wings towed under water, that makes it possible to predict the downstream distance behind an aircraft in flight where its trailing vortex will begin to decay. Comparisons of measured and predicted data are discussed.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 135
    Publication Date: 2011-08-16
    Description: The artificial viscosity method of Kuwahara and Takami (1973) is used to calculate the roll-up of trailing vortices behind a number of practical aerodynamic configurations. Where possible, the results are compared for core location with available experimental data.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 11; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 136
    Publication Date: 2011-08-16
    Description: Electron density profiles which include the effect of an ablated sodium impurity were computed for the boundary layer on a blunt-nosed body re-entering the atmosphere at 7.62 km/sec. Profiles are computed from the nose to a distance of four diameters along the RAM C-payload. A finite-difference, laminar, nonequilibrium chemistry boundary-layer program was used. Comparison of theory with S-band diagnostic antenna results, electron concentration deduced from X- and C-band attenuation data, and Langmuir probe data at several different aft body locations show that agreement is good at high altitude. At the lower altitudes there is disagreement between theory and S-band antenna data where the apparent discrepancy is attributed to the three-body recombination rate constant used for deionization of sodium coupled with the effect of angle of attack.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 137
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: The growth of the field of system identification is discussed along with changes in methodology which have taken place in recent years. The similarity between pattern recognition and system identification is pointed out, involving the modelling in the latter and the feature selection problem in the former. It is stated that once a model is formulated, including the disturbances and measurement errors, the parameter finding can be formulated as a statistical estimation problem. The various techniques and their application are discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Flight Res. Center Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 381-385
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 138
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: A state-of-the-arts review is given for the field of system identification. Progress in the field is traced from the early models of dynamic systems by Sir Isaac Newton up to the present day use of advanced techniques for numerous applications.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 375-379
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 139
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: The criterion that is proposed is an expected value of the mean square response error as an alternative to testing a model against new data. Modeling with respect to this new criterion does not change the estimate for a given model format from a maximum likelihood estimate or mean square response error estimate. The new criterion does, however, provide a means of comparing models with different formats and varying complexity. A numerical example is used to illustrate the application of the proposed criteria and the problem of searching for the best model. For all but the most trivial system identification problems, it is shown that a prohibitive number of combinations of terms of the model must be investigated to ensure the final model is best.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 291-313
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 140
    Publication Date: 2011-08-16
    Description: An error analysis program based on an output error estimation method was used to evaluate the effects of sensor and instrumentation errors on the estimation of aircraft stability and control derivatives. A Monte Carlo analysis was performed using simulated flight data for a high performance military aircraft, a large commercial transport, and a small general aviation aircraft for typical cruise flight conditions. The effects of varying the input sequence and combinations of the sensor and instrumentation errors were investigated. The results indicate that both the parameter accuracy and the corresponding measurement trajectory fit error can be significantly affected. Of the error sources considered, instrumentation lags and control measurement errors were found to be most significant.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 261-280
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 141
    Publication Date: 2011-08-16
    Description: The parameter identification scheme being used is a differential correction least squares procedure (Gauss-Newton method). The position, orientation, and derivatives of these quantities with respect to the parameters of interest (i.e., sensitivity coefficients) are determined by digital integration of the equations of motion and the parametric differential equations. The application of this technique to three vastly different sets of data is used to illustrate the versatility of the method and to indicate some of the problems that still remain.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 191-195
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 142
    Publication Date: 2011-08-16
    Description: This paper presents a summary of principal results obtained from crossflow tests of a model 15-in.-diam lift fan installed in a wing in the NASA Lewis Research Center, 9 by 15 ft V/STOL Propulsion Wind Tunnel. Tests were run with and without exit louvers over a range of tunnel air speeds, fan speeds, and wing angle of attack. Fan thrust in crossflow was influenced by two principal factors: the effects of inflow distortion on blade-row performance, and changes in fan stage operating point brought about by changes in back pressure ratio. In this particular fan, flow separation on the inlet bellmouth did not appear to be a serious problem for crossflow operation.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 10; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 143
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Review of oblique water and fluorocarbon injection test results obtained in experimental studies of the effects of multiple-orifice liquid injection into hypersonic air streams. The results include the finding that maximum lateral penetration from such injections increases linearly with the square root of the jet-to-freestream dynamic-pressure ratio and is proportional to an equivalent orifice diameter.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 144
    Publication Date: 2011-08-16
    Description: A fluid-dynamic investigation was carried out to determine the cause of intense heating observed on the lee meridian of hypersonic delta wings and also to derive means for its suppression. Several experimental techniques were combined with analysis of extensive heat-transfer measurements at a freestream Mach number of six in a range of Reynolds number to acquire a general description of the lee-flow structure. With attached leading-edge flow on the delta wings, the dominant feature is a pair of embedded vortices on the lee meridian whose interaction with the boundary-layer is responsible for the observed local heating. On the basis of flow visualization results and heat-transfer correlations, a qualitative vortex flow model is proposed which differs essentially from the conventional inboard separation vortex model.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 145
    Publication Date: 2011-08-16
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 9; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 146
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Results are presented of some numerical experiments on simple planar configurations. The experiments serve to establish more precisely some ground rules for optimum lattice arrangements. In particular, the location of both the horseshoe vortex elements and the control points at which the surface boundary conditions are to be satisfied is uniquely determined. Questions of lattice arrangement are discussed together with numerical results and problems of control point location.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 10; May 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 147
    Publication Date: 2011-08-16
    Description: Detailed experimental measurements of the characteristics and level of pre- and postshock disturbances obtained for typical disturbance modes and shock angles are presented to aid in the evaluation of transition studies conducted in 'noisy' hypersonic wind tunnels. The presented data suggest that the shock is probably generating total temperature fluctuations in a fashion directly related to shock strength. Since in high supersonic and hypersonic flows the total temperature fluctuations are mainly contained in velocity fluctuations, it may be concluded that the predominant disturbances generated are vorticity as long as the postshock flow is at a sufficiently high Mach number.-
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 148
    Publication Date: 2011-08-16
    Description: Description of an approximate method for predicting the pressure in the immediate corner region and the shock structure on stream-aligned, sharp-leading-edge, symmetrical corner configurations. The method is basically the two-shock method developed by Charwat and Redekopp (1966), with the additional assumption that the corner fillet shock can be located from the calculated pressure in the corner. Corner pressures are correlated over a wide range of Mach numbers in air and helium for different corner wedge angles. The shock structure calculated by this method is compared with supersonic and hypersonic data.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 10; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 149
    Publication Date: 2011-08-16
    Description: The conformal mapping sequence presented transforms the potential flow about a circle into that about an airfoil with an attached flap or spoiler. It is found that adequate versatility of the flap shape for a given airfoil can usually be obtained with the indicated functions, although other transformations would expand the variety of possible flap shapes.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 10; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 150
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Review of data obtained on turbulent burst geometry and growth characteristics for cone boundary-layer transition in a helium wind tunnel at a boundary-layer edge Mach number (Me) of 7.6. Detailed data concerning turbulent spot geometry and downstream propagation velocities were obtained using a spark schlieren system with sequential spark capability. In one particular test evidence of a symmetrical turbulent burst ring was obtained; all other bursts developed in a singular random manner. Profiles of the apparent outer edges of the bursts were obtained, and the velocities of the leading and trailing edges of the bursts relative to the local velocity were determined. The velocities of the leading and trailing edges were found to be fairly consistent for each observation, with the leading edge of the burst traveling at about local edge velocity, while the trailing edge moved supersonically relative to local speed.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 151
    Publication Date: 2011-08-16
    Description: Determination of the stagnation region heating of probes entering the Venusian atmosphere. Both convective and radiative heat-transfer rates are predicted, and account is taken of the important effects of radiative transport in the vehicle shock layer. A nongray radiative transport model is utilized which parallels a four-band treatment previously developed for air (Page et al., 1969), but includes two additional bands to account for the important CO(4+) molecular band system. Some comparisons are made between results for Venus entry and results for earth entry obtained using a viscous earth entry program.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 152
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Review of wind tunnel test data obtained for tip vortex studies on a square-tipped rectangular wing. The results include wing surface pressure distributions, three-dimensional velocity components in the wake, and principal vortex characteristics such as peak tangential velocity and core size distributions. The wind tunnel measurements are compared with flight test data. These comparisons show that the magnitudes of circumferential velocities, normalized by flight speed and lift coefficient, as well as the vortex core radius, normalized by wing span, are in close agreement. The data obtained make possible the calculation of turbulence stress distributions and the formulation of models for the prediction of downstream flow fields.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 153
    Publication Date: 2012-05-22
    Description: The aerodynamic effectiveness of various propulsive lift concepts to provide for the low speed performance and control required for short takeoff and landing aircraft is discussed. The importance of the interrelationship between the propulsion system and aerodynamic components of the aircraft is stressed. The relative effectiveness of different lift concepts was evaluated through static and wind tunnel tests of various aerodynamic models and propulsion components, simulations of aircraft, and in some cases, flight testing of research aircraft incorporating the concepts under study. Results of large scale tests of lift augmentation devices are presented. The results of flight tests of STOL research aircraft with augmented jet flaps and rotating cylinder flaps are presented to show the steeper approach flight paths at low forward speeds.
    Keywords: AERODYNAMICS
    Type: AGARD V/STOL Aerodyn.; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 154
    Publication Date: 2011-08-16
    Description: A numerical generalized-capacity-matrix technique is developed for application to aerodynamic flow computations. This technique allows the very fast direct (noniterative) numerical elliptic solvers to be used in problems with arbitrary internal boundaries and with a wide class of boundary conditions, including numerical application of the Kutta condition on an airfoil without iteration. Accuracy, speed, and usefulness of the technique are demonstrated with linear problems for potential flows over airfoil shapes. The method's main advantages, however, can be exploited within iterative procedures for a variety of complex flow problems governed by systems of equations not necessarily elliptic or linear.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 155
    Publication Date: 2011-08-16
    Description: A fast direct (noniterative) 'Cauchy-Riemann Solver' is developed for solving the finite-difference equations representing systems of first-order elliptic partial differential equations in the form of the nonhomogeneous Cauchy-Riemann equations. The method is second-order accurate and requires approximately the same computer time as a fast cyclic-reduction Poisson solver. The accuracy and efficiency of the direct solver are demonstrated in an application to solving an example problem in aerodynamics: subsonic inviscid flow over a biconvex airfoil. The analytical small-perturbation solution contains singularities, which are captured well by the computational technique. The algorithm is expected to be useful in nonlinear subsonic and transonic aerodynamics.
    Keywords: AERODYNAMICS
    Type: Journal of Computational Physics; 15; May 1974
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 156
    Publication Date: 2011-08-16
    Description: Some recent experience at Ames Research Center in the estimation of aerodynamic coefficients for the Lear-Jet and the Augmentor Wing Jet STOL Research Aircraft is reviewed. The coefficients estimated from flight data are compared with values based on large-scale wind-tunnel tests. The results obtained by the regression and quasilinearization identification techniques are also compared. The regression method generally provides the lower standard deviation in the coefficient estimates and provides the better fit to the wind-tunnel values. The addition of nonlinear terms in the aerodynamic equations decreases the difference between the estimated and measured time histories but also increases the standard deviation in the estimated coefficient values.
    Keywords: AERODYNAMICS
    Type: Parameter Estimation Tech. and Appl. in Aircraft Flight Testing; p 125-148
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 157
    Publication Date: 2011-08-16
    Description: A centerline heating approximation is proposed in which only three basic equations need be solved. The heat rates correlate well with those obtained by more complex procedures. The approximation is readily adaptable to existing trajectory optimization programs to provide realistic surface temperature constraint capability with little increase in computer storage capacity and computer time. It is based on an analysis of heat-rate data computed for altitudes from 36,000 to 122,000 m, velocities from 600 to 7900 m/sec, and angles of attack from 0 to 60 degrees.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 10; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 158
    Publication Date: 2011-08-16
    Description: Recently, relatively new analytical procedures have been successfully used to design bleed systems for mixed-compression inlets designed to operate efficiently up to Mach number 2.65. The procedures used constitute a major advance in inlet technology by offering a promising approach to attain high internal and external performance for mixed-compression inlets that operate over a large supersonic Mach number range. Unfortunately, there is a lack of data describing bleed hole performance characteristics to verify these procedures at high Mach numbers. This paper briefly discusses the analytical procedures for designing advanced inlet systems and suggests facility modifications wherein the procedures can be verified on large-scale inlet models up to approximately Mach number 4.5.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 10; May 1973
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 159
    Publication Date: 2011-08-16
    Description: Expressions are derived, according to a method developed by the author (1972), for bodies in which the cross-sectional shape (but not necessarily the area) is constant along the longitudinal axis. For the more general case of a body alone or with lifting surfaces where the cross-sectional shape varies along the length, a similar procedure is suggested. The specific case for an elliptic cone with a triangular wing is considered, and formulas for winged elliptic cross sections are developed. For the limited test conditions shown, the agreement between computed and experimental results is very good.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 11; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 160
    Publication Date: 2011-08-16
    Description: A procedure is given for deriving the equations describing the surface streamline metric in a general form and in a form suitable for incorporation into computer codes to calculate an inviscid flow about three-dimensional bodies. Sample results are included to show the application of the metric in conjunction with an axisymmetric analog to predict heat transfer to a typical space shuttle orbiter.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 10; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 161
    Publication Date: 2011-08-16
    Description: Data were obtained concerning a model which utilized a two-dimensional sonic jet. It was found that outflow and jet location significantly influence the magnitude and behavior of the secondary jet interaction forces. Continued refinements in jet interaction analyses which do not account for outflow are of limited usefulness in the design of control systems for supersonic and hypersonic vehicles. The jet total back pressure ratio increases with either jet pressure ratio or freestream Mach number.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 9; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 162
    Publication Date: 2011-08-16
    Description: Discussion of the local heating effect on the lee-side control flaps of supersonic configurations due to the interaction between vortices and leeward control surfaces at an angle of attack. Considerations are given for an appropriate positioning of control flaps to alleviate such interactions and the resulting thermal effect. Tests are carried out on a sharp right circular cone with two types of flap configurations in a study of oil flow patterns about the cone at selected angles of attack. Splitting of flaps and moving them to positions away from the symmetry plane did reduce the heating but also reduced the average flap pressure and increased flow complexity.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 11; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 163
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: A new static probe design is described in which the static holes are located much closer to the tip than in conventional probes. The new probe shows promise for use in some situations where conventional probes become highly inaccurate. An additional advantage of the new design is that, when used in static pressure survey rakes, the probes can be located much closer together than in conventional designs and still ensure that disturbances from neighboring probe tips do not affect the static readings.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 12; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 164
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Presented data on vortex-induced heating in a cone-cylinder body at Mach 6 show that the most severe heating need not occur as a result of the interaction of the primary vortices with the lee surface, even though this interaction produces a large, well-defined featherline oil smear. It is pointed out that the severity of vortex-induced heating is extremely sensitive to Reynolds number and geometry and that there exists a 'threshold Reynolds number' below which vortex-induced heating decreases abruptly.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 11; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 165
    Publication Date: 2011-08-16
    Description: The changes in aerodynamic characteristics due to real-gas effects associated with high speed flight (characterized by large shock density ratios) are primarily the result of changes in surface pressures acting on the forebody. The surface pressures are affected by a change in shock density ratio (real-gas effects) in two ways. First, the level of pressure at the stagnation point relative to freestream dynamic pressure is changed, and second, the distribution of surface pressure relative to stagnation-point pressure is changed. The density-ratio effect on the stagnation point pressure level can be estimated by considering the flow of a perfect gas about a blunt body.
    Keywords: AERODYNAMICS
    Type: Journal of Spacecraft and Rockets; 11; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 166
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: Starting criterion for hypersonic inlets with large turbulent boundary layers, considering total pressure recovery from all shock and viscous losses
    Keywords: AERODYNAMICS
    Type: ; YSICA STATUS SOLIDI
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 167
    facet.materialart.
    Unknown
    In:  Other Sources
    Publication Date: 2011-08-16
    Description: One dimensional compound compressible nozzle flow solution dependence on initial conditions and nozzle geometry, discussing applications to bypass turbojets and solid propellant motors
    Keywords: AERODYNAMICS
    Type: ; ADEMIE DES SCIENCES
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 168
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2012-05-22
    Description: An analysis of the development and technological applications of V/STOL aircraft is presented. The use of V/STOL aircraft to overcome the limitations of conventional aircraft is discussed. The aspects of V/STOL aircraft which are considered are: (1) economic penalties of propulsive lift, (2) advantages of propulsive lift, (3) potential improvements in V/STOL aircraft, (4) the aerodynamics of V/STOL aircraft, and (5) proposals for additional research in V/STOL development.
    Keywords: AERODYNAMICS
    Type: AGARD V/STOL Aerodyn.; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 169
    Publication Date: 2012-05-22
    Description: Wind effects on launch vehicle and equations of motion of vehicle
    Keywords: AERODYNAMICS
    Type: AGARD WIND EFFECTS ON LAUNCH VEHICLES FEB. 1970; P 199-226
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 170
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2012-05-22
    Description: Aerodynamic loads produced by winds and launch vehicle designing
    Keywords: AERODYNAMICS
    Type: AGARD WIND EFFECTS ON LAUNCH VEHICLES FEB. 1970; P 75-114
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 171
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2016-06-07
    Description: The development of a three axis stabilized balloon platform capable of being operated in three modes of increasing accuracy is discussed. The system relies on angular motion sensing for primary feedback with linear accelerometers, magnetometers, and a star sensor for positional information. When under primary control the system will acquire and stabilize on any accessible part of the celestial sphere. A video verification system is included to provide pointing confirmation. Under improved accuracy control, the star sensor is used to lock onto a target star.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 284-293
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 172
    Publication Date: 2016-06-07
    Description: The establishment and functions of the AFCRL balloon operations facility are discussed. The types of research work conducted by the facility are defined. The facilities which support the balloon programs are described. The free balloon and tethered balloon capabilities are analyzed.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 160-164
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 173
    Publication Date: 2016-06-07
    Description: A configuration has been developed for a long-life balloon platform to carry pointing telescopes weighing as much as 80 pounds (36 kg) to point at selected celestial targets. A platform of this configuration weighs about 375 pounds (170 kg) gross and can be suspended from a high altitude super pressure balloon for a lifetime of several months. The balloon platform contains a solar array and storage batteries for electrical power, up and down link communications equipment, and navigational and attitude control systems for orienting the scientific instrument. A biaxial controller maintains the telescope attitude in response to look-angle data stored in an on-board computer memory which is updated periodically by ground command. Gimbal angles are computed by using location data derived by an on-board navigational receiver.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 136-144
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 174
    Publication Date: 2016-06-07
    Description: A system capable of pointing a balloon-borne telescope at selected celestial objects to an accuracy of approximately 10 arc minutes for an extended period (weeks to months) without reliance on telemetry is described. A unique combination of a sun/star tracker, an on-board computer, and a gyrocompass is utilized for navigation, source acquisition and tracking, and data compression and recording. The possibilities for intelligent activities by the computer are also discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Telescope Systems for Balloon-Borne Res.; p 71-80
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 175
    Publication Date: 2016-06-07
    Description: An overview of an experimental and analytical research program underway for studying the aeroelastic and dynamic characteristics of tilt-rotor VTOL aircraft is presented. Selected results from several investigations of scaled models in the transonic dynamics tunnel, as well as some results from a test of a flight-worthy proprotor in the full-scale wind tunnel are shown and discussed with a view toward delineating various aspects of dynamic behavior peculiar to proprotor aircraft. Included are such items as proprotor/pylon stability, whirl flutter, gust response, and blade flapping. Theoretical predictions are shown to be in agreement with the measured stability and response behavior.
    Keywords: AERODYNAMICS
    Type: Its Rotorcraft Dyn.; p 171-184
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 176
    Publication Date: 2016-06-07
    Description: A nine degrees-of-freedom theoretical model was developed for investigations of the dynamics of a proprotor operating in high inflow axial flight on a cantilever wing. The theory is described, and the results of the analysis are presented for two proprotor configurations: a gimballed, stiff-inplane rotor, and a hingeless, soft-inplane rotor. The influence of various elements of the theory are discussed, including the modeling used for the blade and wing aerodynamics, and the influence of the rotor lag degree of freedom. The results from full-scale tests of the two proprotors are presented and compared with the theoretical results.
    Keywords: AERODYNAMICS
    Type: Its Rotorcraft Dyn.; p 159-169
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 177
    Publication Date: 2016-06-07
    Description: Simulated reentry heating of the all-silica surface insulation material under a variety of conditions including arc jet and radiant lamp facilities for up to 100 simulated flight cycles has demonstrated consistent thermal performance capability. Consistent predictability along with demonstrated coating integrity and dimensional stability to 1645 K validates the earlier selection of the all-silica material for the RSI application.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Symp. on Reusable Surface Insulation for Space Shuttle, Vol. 2; p 623-666
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 178
    Publication Date: 2016-06-07
    Description: Glassy fibrous mullite coatings exhibit noncatalytic surface characteristics which limit surface temperature rise under certain convective heat flux conditions. Thermal conductivity design curves provide good agreement with test results. The inclusion of shine-in effects results in improved accuracy of transient temperature gradient predictions for the materials.
    Keywords: AERODYNAMICS
    Type: NASA. Ames Res. Center Symp. on Reusable Surface Insulation for Space Shuttle, Vol. 2; p 485-524
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 179
    Publication Date: 2016-06-07
    Description: The technique of mixing argon with air was used to simulate the temperature-time trajectory experienced by space shuttle vehicle insulation panels. Gap heating appears to be highly dependent upon gap design, it is relatively low for interlocking and tapered panel designs and significantly higher for a wider, unfilled gap design. The heating rate appears to be significantly higher at the windward facing edges of flush tiles and is aggravated at forward facing steps. This heating, however, is highly dependent on step heights relative to some characteristic thickness of the boundary layer.
    Keywords: AERODYNAMICS
    Type: Symp. on Reusable Surface Insulation for Space Shuttle, Vol. 2; p 371-423
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 180
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2016-06-07
    Description: A simple, systematic, optimized vortex-lattice approach is developed for application to lifting-surface problems. It affords a significant reduction in computational costs when compared to current methods. Extensive numerical experiments have been carried out on a wide variety of configurations, including wings with camber and single or multiple flaps, as well as high-lift jetflap systems. Rapid convergence as the number of spanwise or chordwise lattices are increased is assured, along with accurate answers. The results from this model should be useful not only in preliminary aircraft design but also, for example, as input for wake vortex roll-up studies and transonic flow calculations.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Res. Center Vortex-Lattice Utilization; p 325-342
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 181
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-06-28
    Description: This volume contains cost, schedule, and technical information on the following B-70 aircraft subsystems: air induction system, flight control, personnel accommodation and escape, alighting and arresting, mission and traffic control, flight indication, test instrumentation, and installation, checkout, and pre-flight.
    Keywords: AERODYNAMICS
    Type: NASA-CR-115705 , SD-72-SH-0003-VOL-4 , NAS 1.26:115705 , JSC-CN-29834
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 182
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-06-28
    Description: Volume 2 of the final report on the B-70 aircraft study is presented here. The B-70 Program, at the onset, was a full weapon system capable of sustained Mach 3 flight for the major portion of its design missions. The weapon system was to enter the SAC inventory as an RS-70 with the first intercontinental resonnaissance/bomber wing scheduled to go operational in July, 1964. After several redirections, a two XB-70 air vehicle program emerged with its prime objective being to demonstrate the technical feasibility of sustained Mach 3 flight. This section describes the original Weapon System 110A concepts, the evolution of the RS-70 design, and the XB-70 air vehicles which demonstrated the design, fabrication, and technical feasibility of long range Mach 3 flights at high altitude. The data presented shows that a very large step forward in the state-of-the-art of manned aircraft design was achieved during the B-70 development program and that advances were made and incorporated in every area, including design, materials application, and manufacturing techniques.
    Keywords: AERODYNAMICS
    Type: NASA-CR-115703 , SD-72-SH-0003-VOL-2 , NAS 1.26:115703 , JSC-CN-29832
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 183
    facet.materialart.
    Unknown
    In:  CASI
    Publication Date: 2019-06-28
    Description: This Phase 2 final report for the B-70 aircraft study contains the data location matrix, which provides a summary of the major cost, schedule, and technical items provided in the report; work breakdown structure; cost definitions; and B-70 program level summary data. The Phase 2 objective was to provide the B-70 aircraft data in accordance with the approved study plan. Several minor modifications to the original plan have been made as the result of the Phase 2 effort.
    Keywords: AERODYNAMICS
    Type: NASA-CR-115702 , SD-72-SH-0003-VOL-1 , NAS 1.26:115702 , JSC-CN-29818
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 184
    Publication Date: 2019-06-28
    Description: The results of the investigation showed that the configuration exhibits a sufficiently high drag divergence Mach number to cruise at near sonic speeds. The configuration is longitudinally stable through the cruise Mach number and lift coefficient range, but at higher lift coefficients displays pitchup and becomes unstable. The configuration was directionally stable at all test conditions and laterally stable in the angle of attack range required for cruise.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-2622 , L-8226
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 185
    Publication Date: 2019-06-28
    Description: A lifting airfoil theoretically designed for shockless supercritical flow utilizing a complex hodograph method has been evaluated in the Langley 8-foot transonic pressure tunnel at design and off-design conditions. The experimental results are presented and compared with those of an experimentally designed supercritical airfoil which were obtained in the same tunnel.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-3082 , L-9548 , NAS 1.15:X-3082
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 186
    Publication Date: 2019-06-28
    Description: The statis stability and control characteristics and air loads on the wing and aileron of a 0.09 scale model of an airplane with a 17 percent thick supercritical wing were investigated. The longitudinal aerodynamic characteristics were determined over a lift coefficient range sufficiently high to induce buffet onset at Mach numbers from 0.30 to 0.80. In addition, the lateral aerodynamic characteristics were determined as a function of sideslip angle and angle of attack at selected Mach numbers.
    Keywords: AERODYNAMICS
    Type: NASA-TM-X-2551 , L-8081 , NAS 1.15:X-2551
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 187
    Publication Date: 2019-06-27
    Description: The potential benefits, impact and spinoff of IPAD technology are described. The benefits are projected from a flowtime and labor cost analysis of the design process and a study of the flowtime and labor cost savings being experienced with existing integrated systems. Benefits in terms of designer productivity, company effectiveness, and IPAD as a national resource are developed. A description is given of the potential impact of information handling as an IPAD technology, upon task and organization structure and people who use IPAD. Spinoff of IPAD technology to nonaerospace industries is discussed. The results of a personal survey made of aerospace, nonaerospace, government and university sources are given.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132397 , D6-60181-7
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 188
    Publication Date: 2019-06-27
    Description: The strategy of the IPAD implementation plan presented, proposes a three phase development of the IPAD system and technical modules, and the transfer of this capability from the development environment to the aerospace vehicle design environment. The system and technical module capabilities for each phase of development are described. The system and technical module programming languages are recommended as well as the initial host computer system hardware and operating system. The cost of developing the IPAD technology is estimated. A schedule displaying the flowtime required for each development task is given. A PERT chart gives the developmental relationships of each of the tasks and an estimate of the operational cost of the IPAD system is offered.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132396 , D6-60181-6
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 189
    Publication Date: 2019-06-27
    Description: The catalog is presented of technical program elements which are required to support the design activities for a subsonic and supersonic commercial transport. Information for each element consists of usage and storage information, ownership, status and an abstract describing the purpose of the element.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132395 , D6-60181-5
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 190
    Publication Date: 2019-06-27
    Description: The computing system design of IPAD is described and the requirements which form the basis for the system design are discussed. The system is presented in terms of a functional design description and technical design specifications. The functional design specifications give the detailed description of the system design using top-down structured programming methodology. Human behavioral characteristics, which specify the system design at the user interface, security considerations, and standards for system design, implementation, and maintenance are also part of the technical design specifications. Detailed specifications of the two most common computing system types in use by the major aerospace companies which could support the IPAD system design are presented. The report of a study to investigate migration of IPAD software between the two candidate 3rd generation host computing systems and from these systems to a 4th generation system is included.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132394 , D6-60181-4
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 191
    Publication Date: 2019-06-27
    Description: The user requirements for computer support of the IPAD design process are identified. The user-system interface, language, equipment, and computational requirements are considered.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132393 , D6-60181-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 192
    Publication Date: 2019-06-27
    Description: The extent to which IPAD is to support the design process is identified. Case studies of representative aerospace products were developed as models to characterize the design process and to provide design requirements for the IPAD computing system.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132392 , D6-60181-2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 193
    Publication Date: 2019-06-27
    Description: Reports on the design process, support of the design process, IPAD System design catalog of IPAD technical program elements, IPAD System development and operation, and IPAD benefits and impact are concisely reviewed. The approach used to define the design is described. Major activities performed during the product development cycle are identified. The computer system requirements necessary to support the design process are given as computational requirements of the host system, technical program elements and system features. The IPAD computer system design is presented as concepts, a functional description and an organizational diagram of its major components. The cost and schedules and a three phase plan for IPAD implementation are presented. The benefits and impact of IPAD technology are discussed.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132391 , D6-60181-1B
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 194
    Publication Date: 2019-06-27
    Description: IPAD was defined as a total system oriented to the product design process. This total system was designed to recognize the product design process, individuals and their design process tasks, and the computer-based IPAD System to aid product design. Principal elements of the IPAD System include the host computer and its interactive system software, new executive and data management software, and an open-ended IPAD library of technical programs to match the intended product design process. The basic goal of the IPAD total system is to increase the productivity of the product design organization. Increases in individual productivity were feasible through automation and computer support of routine information handling. Such proven automation can directly decrease cost and flowtime in the product design process.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132390 , D6-60181-1A
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 195
    Publication Date: 2019-06-27
    Description: A baseline implementation plan, including alternative implementation approaches for critical software elements and variants to the plan, was developed. The basic philosophy was aimed at: (1) a progressive release of capability for three major computing systems, (2) an end product that was a working tool, (3) giving participation to industry, government agencies, and universities, and (4) emphasizing the development of critical elements of the IPAD framework software. The results of these tasks indicate an IPAD first release capability 45 months after go-ahead, a five year total implementation schedule, and a total developmental cost of 2027 man-months and 1074 computer hours. Several areas of operational cost increases were identified mainly due to the impact of additional equipment needed and additional computer overhead. The benefits of an IPAD system were related mainly to potential savings in engineering man-hours, reduction of design-cycle calendar time, and indirect upgrading of product quality and performance.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132406
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 196
    Publication Date: 2019-06-27
    Description: Viable designs are presented of various elements of the IPAD framework software, data base management system, and required new languages in relation to the capabilities of operating systems software. A thorough evaluation was made of the basic systems functions to be provide by each software element, its requirements defined in the conceptual design, the operating systems features affecting its design, and the engineering/design functions which it was intended to enhance.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132405
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 197
    Publication Date: 2019-06-27
    Description: System requirements, software elements, and hardware equipment required for an IPAD system are defined. An IPAD conceptual design was evolved, a potential user survey was conducted, and work loads for various types of interactive terminals were projected. Various features of major host computing systems were compared, and target systems were selected in order to identify the various elements of software required.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132404
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 198
    Publication Date: 2019-06-27
    Description: A series of functional flow charts are considered that were developed to properly identify and record the degree of participation of the disciplines considered in this feasibility study and the type of data required in the design process.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132403
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 199
    Publication Date: 2019-06-27
    Description: The aircraft design process is discussed along with the degree of participation of the various engineering disciplines considered in this feasibility study.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132402
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 200
    Publication Date: 2019-06-27
    Description: An overview is provided of the Ipad System, including its goals and objectives, organization, capabilities and future usefulness. The systems implementation is also presented with operational cost summaries.
    Keywords: AERODYNAMICS
    Type: NASA-CR-132401
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...