ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (559)
  • AERODYNAMICS  (366)
  • SPACECRAFT PROPULSION AND POWER  (193)
  • Animals
  • 1980-1984  (559)
  • 1925-1929
  • 1981  (559)
  • 1
    facet.materialart.
    Unknown
    Curved-flow, rolling-flow, and oscillatory pure-yawing wind-tunnel test methods for determination of dynamic stability derivatives (1981)
    In:  CASI
    Details
    Publication Date: 2011-10-14
    Description: The test capabilities of the Stability Wind Tunnel of the Virginia Polytechnic Institute and State University are described, and calibrations for curved and rolling flow techniques are given. Oscillatory snaking tests to determine pure yawing derivatives are considered. Representative aerodynamic data obtained for a current fighter configuration using the curved and rolling flow techniques are presented. The application of dynamic derivatives obtained in such tests to the analysis of airplane motions in general, and to high angle of attack flight conditions in particular, is discussed.
    Keywords: AERODYNAMICS
    Type: AGARD Dyn. Stability Parameters; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Space shuttle main engine: Hydraulic system (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The hydraulic actuation system of the space shuttle main engine is discussed. The system consists of five electrohydraulic actuators and a single engine filter used to control the five different propellant valves, which in turn control thrust and mixture ratio of the space shuttle main engine. The hydraulic actuation system provides this control with a precision of 98.7 percent or an error in position no greater than 1.3 percent of full scale rotational travel for critical positions.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: the 15th Aerospace Mech. Symp.; p 291-301
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    SRB dewatering set (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The system components and operation of the space shuttle solid rocket booster (SRB) dewatering set are described. The SRB dewatering set consists of a nozzle plug, control console, remote control unit, power distribution unit, umbilical cable, interconnect cables, and various handling and storage items. The nozzle plug (NP) is a remotely controlled, tethered underwater vehicle that is launched from the retrieval vessel (RV) by a crane, descends down the side of the SRB, and is positioned below the SRB nozzle. A TV camera mounted at the top of the NP central core is used by the control console operator to visually guide the NP during descent and docking. The NP is then driven up and locked into the nozzle. Compressed air is passed through the umbilical from the RV, through the NP and into the SRB motor. The water inside the SRB is expelled causing the SRB to rotate to a near horizontal attitude on the surface of the water.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA. Marshall Space Flight Center The 15th Aerospace Mech. Symp.; p 279-289
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Zero gravity testing of flexible solar arrays (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Zero gravity testing in the KC-135 aircraft of flat fold flexible solar array test specimens sufficiently demonstrated the adequacy of the panel design. The aircraft flight crew provided invaluable assistance and significantly contributed to the design and development of the flexible solar array, and ultimately to the potential success of the solar electric propulsion solar array shuttle flight experiment program.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: The 15th Aerospace Mech. Symp.; p 115-136
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    An analytic solution to the classical two-body problem with drag (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The two body problem was analyzed with a specific drag model. The model treats drag as a force proportional to the vector velocity and inversely proportional to the distance to the center of attraction. The solution is expressed in terms of known functions and is of a simple and compact form. The time of flight is expressed as a quadrature in the true anomaly. The results are: (1) development of a vector differential equation which allows analysis of an infinite number of gravitational and drag models; and (2) obtaining the solution of a linear differential equation using the inverse method of laplace transforms.
    Keywords: AERODYNAMICS
    Type: Houston Univ. The 1981 NASA ASEE Summer Fac. Fellowship Program, Vol. 2; 22 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    Langley high-lift research on a high-aspect-ratio supercritical wing configuration (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: To determine the low speed performance characteristics of a representative high aspect ratio supercritical wing, two low speed jet transport models were fabricated. A 12-ft. span model was used for low Reynolds number tests in the Langley 4- by 7-Meter Tunnel and the second, a 7.5-ft. span model, was used for high Reynolds number tests in the Ames 12-foot Pressure Tunnel. A brief summary of the results of the tests of these two models is presented and comparisons are made between the data obtained on these two models and other similar models. Follow-on two and three dimensional research efforts related to the EET high-lift configurations are also presented and discussed.
    Keywords: AERODYNAMICS
    Type: Advan. Aerodyn.: Selected NASA Res.; p 55-77
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Measured transonic unsteady pressures on an energy efficient transport wing with oscillating control surfaces (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Highlight results are presented from subsonic and transonic pressure measurement studies conducted in the Langley Transonic Dynamics Tunnel on a supercritical wing model representative of an energy efficient transport design. Steady- and unsteady-pressure data were acquired on the upper and lower wing surface at an off-design Mach number of 0.60 and at the design Mach number of 0.78, for a Reynolds number of 2.2 x 10(6) (based on the wing average chord). The model configuration consisted of a sidewall-Mounted half-body fuselage and a semi-span wing with an aspect ratio of 10.76, a leading-edge sweepback angle of 28.8 degrees, and supercritical airfoil sections. The wing is instrumented with 252 static pressure orifices and 164 dynamic pressure gages. Model test variables included wing angle of attack, control-surface mean deflection angle, control-surface oscillating deflection angle and frequency, and phasing between oscillating leading-edge and trailing-edge controls when used together.
    Keywords: AERODYNAMICS
    Type: Advan. Aerodyn.: Selected NASA Res.; p 21-36
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Radiation transfer with scattering (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Prediction techniques with scattering (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Spatial integration procedures (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Spectrally averaged parameters (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Band models (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 22 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Fundamentals (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 15 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Plume radiation heat transfer (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Base flow simulation: Hot flow simulation for base heating analysis (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Base flow simulation (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Base flow simulation: Cold flow simulation for base pressure analysis (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 21 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Impingement environments (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Impingement flowfields (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Free molecular plumes (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Onset of rarefaction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Viscous - inviscid coupling (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 10 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Continuumm plume (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Multiple engines: Non-symmetrical engine arrangements (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 25 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Nozzle boundary layers (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Multiple engines: Dual engines (in-line multiple engines) (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 33 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Multiple engines: Symmetrical engine arrangements (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 100 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Multiple engines (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Single engine (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 109 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Single engine: Plume induced flow separation (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 39 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Recommended procedure for selecting methodology (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Methodology selection plan (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Historical development of base flow predictive methods (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    JANNAF Handbook: Rocket Exhaust Plume Technology. Chapter 5: Base flow. Problem definition (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 27 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    JANNAFF Handbook: Rocket Exhaust Plume Technology. Chapter 5: Base flow. Nomenclature (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAFF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    JANNAF Handbook: Rocket exhaust plume technology. Chapter 5: Base flow. Introduction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAFF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    Vortex-flow aerodynamics - An emerging design capability (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Promising current theoretical and simulational developments in the field of leading edge vortex-generating delta, arrow ogival wings are reported, along with the history of theory and experiment leading to them. The effects of wing slenderness, leading edge nose radius, Mach number and incidence variations, and planform on the onset of vortex generation and redistribution of aerodynamic loads are considered. The range of design possibilities in this field are consequential for the future development of strategic aircraft, supersonic transports and commercial cargo aircraft which will possess low-speed, high-lift capability by virtue of leading edge vortex generation and control without recourse to heavy and expensive leading edge high-lift devices and compound airfoils. Attention is given to interactive graphics simulation devices recently developed.
    Keywords: AERODYNAMICS
    Type: Astronautics and Aeronautics; 19; May 1981
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Longitudinal grooves for bluff body drag reduction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Wind tunnel test results are presented for four axisymmetric bluff body configurations in order to determine their effect on form and pressure drag. It was found that drag reductions on the order of 40% are obtainable with an afterbody incorporating four longitudinal 'V' grooves. Although this effect may be due to the functioning of the grooves as longitudinal, continuous vortex generators, it is concluded that further research is needed to elucidate the physical basis of the test results. Optimization of the effect will be useful in base drag reduction for such vehicles as automobiles and cargo aircraft with sharply upswept afterbodies.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Vectored injection into compressible laminar and turbulent boundary layers (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A fundamental analysis of two-dimensional supersonic boundary layer flow, both laminar and turbulent, is presented for a wide range of normal and nonnormal mass-transfer velocities. The analysis is based on the numerical solution of the Navier-Stokes equations, and results are compared with available theoretical and experimental data. Certain cases of practical importance, for which results are not presently available, are referred to.
    Keywords: AERODYNAMICS
    Type: Computer Methods in Applied Mechanics and Engineering; 25; Jan. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Report of the panel on theoretical aerodynamics (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Interactions between theoretical aerodynamics and the NTF are discussed. The development and validation of computational fluid dynamics computer codes, the determination of Reynolds number scaling laws, and extension of the data bases of entrainment type turbulence models to include high Reynolds number data are recommended areas of study. The major benefit theoretical aerodynamics could have on the NTF is in the quantitative description of wind tunnel wall interference effects.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 277-286
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    High Reynolds number research requirements for space vehicle design (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Requirements of entry vehicle design requiring high Reynolds number wind tunnel testing are discussed. The space shuttle orbiter, development of future space transportation systems, and planetary entry data analysis are considered.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 265-274
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Report of the panel on aeroelasticity and unsteady aerodynamics (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The status of recommended areas of study for the NTF are reviewed. Transonic and control surface unsteady aerodynamics, and buffet onset and loads are considered. Testing of dynamically scaled flutter models is discussed.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 237-246
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Model experience in the Langley 0.3-m transonic cryogenic tunnel (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The model building, development, and testing experience gained during 8 years of operation of the 0.3-m Transonic Cryogenic Tunnel (TCT) is summarized. The summary is divided into four portions: (1) models tested in the 0.3-m TCT's original octagonal test section; (2) models tested in the present two dimensional test section; (3) models tested as a part of tunnel calibration and the development of advanced technology airfoils; and (4) development of a new way to construct two dimensional airfoil models. Design requirements imposed on the models by high Reynolds number testing at cryogenic temperatures are reviewed.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 53-73
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Measuring the spacecraft and environmental interactions of the 8-cm mercury ion thrusters on the P80-1 mission (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The subject interface measurements are described for the Ion Auxiliary Propulsion System (IAPS) flight test of two 8-cm thrusters. The diagnostic devices and the effects to be measured include: 1) quartz crystal microbalances to detect nonvolatile deposition due to thruster operation; 2) warm and cold solar cell monitors for nonvolatile and volatile (mercury) deposition; 3) retarding potential ion collectors to characterize the low energy thruster ionic efflux; and 4) a probe to measure the spacecraft potential and thruster generated electron currents to biased spacecraft surfaces. The diagnostics will also assess space environmental interactions of the spacecraft and thrusters. The diagnostic data will characterize mercury thruster interfaces and provide data useful for future applications.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Effectiveness of leading-edge vortex flaps on 60 and 75 degree delta wings (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A series of wind tunnel tests were run on 60 and 75 deg sweep delta wings to examine the effectiveness of leading-edge vortex flaps. Tests results showed that leading-edge vortex flaps are effective in giving large increases in lift-to-drag ratio and decreases in drag over a wide range of angle of attack. Tests on inverted flaps on the 60 deg delta wing showed substantial increases in lift and drag and may indicate a possibility of using inverted flaps on delta wings in the landing portion of flight. The 60 deg data were compared with that for a 75 deg sweep delta wing confirming that leading-edge vortex flap effectiveness is stronger as sweep is increased. Pitching moment effects due to vortex flaps use were also examined.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 18; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Partially confined multiple jet mixing (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Results of hot-wire measurements in an incompressible partially confined jet issuing from an array of rectangular nozzles, equally spaced with their small dimensions aligned are presented. The quantities measured include mean velocity and the Reynolds stress in the two central planes of the jet at stations covering up to 115 widths (small dimension of a nozzle) downstream of the nozzle exit. For downstream distances greater than 60 widths, the flowfield is observed to be nearly homogenous and the turbulence appears to be quite similar to that of a grid generated turbulence.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Unsteady Newton-Busemann flow theory. I - Airfoils (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Newtonian flow theory for unsteady flow at very high Mach numbers is completed by the addition of a centrifugal force correction to the impact pressures. The correction term is the unsteady counterpart of Busemann's centrifugal force correction to impact pressures in steady flow. For airfoils of arbitary shape, exact formulas for the unsteady pressure and stiffness and damping-in-pitch derivatives are obtained in closed form, which require only numerical quadratures of terms involving the airfoil shape. They are applicable to airfoils of arbitrary thickness having sharp or blunt leading edges. For wedges and thin airfoils these formulas are greatly simplified, and it is proved that the pitching motions of thin airfoils of convex shape and of wedges of arbitrary thickness are always dynamically stable according to Newton-Busemann theory. Leading-edge bluntness is shown to have a favorable effect on the dynamic stability; on the other hand, airfoils of concave shape tend toward dynamic instability over a range of axis positions if the surface curvature exceeds a certain limit. As a byproduct, it is also shown that a pressure formula recently given by Barron and Mandl for unsteady Newtonian flow over a pitching power-law shaped airfoil is erroneous and that their conclusion regarding the effect of pivot position on the dynamic stability is misleading.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Evidence of imbedded vortices in a three-dimensional shear flow (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Vortex phenomena encountered in an investigation of the streamwise development of the three-dimensional wake region behind the tip of a three-dimensional wedge model are reported. Pressure profiles were measured by pitot probes downstream of a tip with a nearly constant surface pressure level and a nearly continuous surface curvature in a blowdown air tunnel operating at Mach 6. Rather than the simple three-dimensional quasi-parallel shear flow expected, the measurements indicated the presence of a flow with large deficits in longitudinal pitot pressure, which are usually associated with the core region of quasi-steady longitudinal vortices. Vapor screen flow visualizations also support the presence of longitudinal vortices located primarily in the tip region and evidently forming in the vicinity of the wake neck. An increase in overall wake thickness by 100% is also observed. The origin of the vortices as quasi-steady Taylor-Gortler vortices generated in the concavely curved shear layer near the wake neck is considered. It is pointed out that the existence of longitudinal vortexes suggests that three-dimensional turbulence modeling may be much more difficult than previously supposed.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Proposed aeroelastic and flutter tests for the National Transonic Facility (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Tests that can exploit the capability of the NTF and the transonic cryogenic tunnel, or lead to improvements that could enhance testing in the NTF are discussed. Shock induced oscillation, supersonic single degree control surface flutter, and transonic flutter speed as a function of the Reynolds number are considered. Honeycombs versus screens to smooth the tunnel flow and a rapid tunnel dynamic pressure reducer are recommended to improve tunnel performance.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center High Reynolds Number Res. - 1980; p 153-161
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Report of the wind tunnel/flight correlation panel (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Basic calibration of the tunnel prior to conducting any tests, the areas requiring wind tunnel/flight test correlation for validating the NTF, and recommendations for achieving validation of the NTF are discussed.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center High Reynolds Number Res. - 1980; p 249-262
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    High lift technology (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The NASA Langley high lift technology program is reviewed and elements of the program which are considered Reynolds number sensitive are discussed. The Energy Efficient Transport (EET) and Supersonic Cruise Research (SCR) models proposed for high lift studies in the National Transonic Facility (NTF) are described. Recommendations regarding the NTF facility and test techniques are presented.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 197-213
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Wall interference effects: Status review (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The interference technology incorporated into the NTF design (hardware) and the emerging transonic wall interference assessment correction procedures (software) to be employed when the NTF becomes operational was reviewed. It is anticipated that the early experiments will provide data relevant to wall interference effects.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 123-241
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Configuration aerodynamics (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Static aerodynamic research related to aircraft configurations in their cruise or combat modes is discussed. Subsonic transport aircraft, transonic tactical aircraft, and slender wing aircraft are considered. The status and plans of Langley's NTF configuration research program are reviewed. Recommendations for near term configuration research are made.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 217-234
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Comments on Reynolds number effects and the role of NTF in the development of air vehicles (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The National Transonic Facility (NTF) capability to match the full scale Reynolds numbers of all but the largest airplanes is discussed. Conversion factors to enable calculation of Sl-unit equivalents for all U.S. units are listed. Using data from several facilities, analytic methods, and flight test data, a competetive aircraft in the relatively low Reynolds number was developed. The NTF offers the capability to obtain data at full scale Reynolds numbers in the cruise condition for most of the products, and will be much closer than previous tunnels to full scale Reynolds number for the operating envelopes. It is primarily on the operating envelope that Reynolds number effects are most important and least predictable.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center High Reynolds Number Res. - 1980; p 143-148
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Solution of the transonic full potential equation in conservative form using an implicit algorithm (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The paper presents numerical solutions of the full potential equation in conservative form. The iteration scheme used is a fully implicit approximate factorization technique and provides a significant improvement in convergence speed relative to standard successive line overrelaxation algorithms. The spatial differencing algorithm is centrally differenced in both subsonic and supersonic regions to maintain stability. This effectively approximates rotated differencing, thereby greatly improving the reliability of the algorithm.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Computation of airfoil buffet boundaries (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The ILLIAC IV computer has been programmed with an implicit, finite-difference code for solving the thin layer compressible Navier-Stokes equation. Results presented for the case of the buffet boundaries of a conventional and a supercritical airfoil section at high Reynolds numbers are found to be in agreement with experimentally determined buffet boundaries, especially at the higher freestream Mach numbers and lower lift coefficients where the onset of unsteady flows is associated with shock wave-induced boundary layer separation.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Nov. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Application of unsteady airfoil theory to rotary wings (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A clarification is presented on recent work concerning the application of unsteady airfoil theory to rotary wings. The application of this theory may be seen as consisting of four steps: (1) the selection of an appropriate unsteady airfoil theory; (2) the resolution of that velocity which is the resultant of aerodynamic and dynamic velocities at a point on the elastic axis into radial, tangential and perpendicular components, and the angular velocity of a blade section about the deformed axis; (3) the expression of lift and pitching moments in terms of the three components; and (4) the derivation of explicit expressions for the components in terms of flight velocity, induced flow, rotor rotational speed, blade motion variables, etc.
    Keywords: AERODYNAMICS
    Type: Journal of Aircraft; 18; July 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    The coupling between flow instabilities and incident disturbances at a leading edge (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: It is now generally agreed that an external disturbance field, such as an incident acoustic wave, can effectively couple to instabilities of a flow past a trailing edge. One purpose of the present paper is to show that there are situations where a similar coupling can occur at a leading edge. The process is analyzed and the effects of experimentally controllable parameters are assessed. It is important to account for such phenomena when evaluating the effect of external disturbances on transition.
    Keywords: AERODYNAMICS
    Type: Journal of Fluid Mechanics; 104; Mar. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    A discrete vortex method for the non-steady separated flow over an airfoil (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A discrete vortex method was used to analyze the separated non-steady flow about a cambered airfoil. The foil flow modelling is based on the thin lifting-surface approach, where the chordwise location of the separation point is assumed to be known from experiments or flow-visualization data. Calculated results provided good agreement when compared with the post-stall aerodynamic data of two airfoils. Those airfoil sections differed in the extent of travel of the separation point with increasing angle of attack. Furthermore, the periodic wake shedding was analyzed and its time-dependent influence on the airfoil was investigated.
    Keywords: AERODYNAMICS
    Type: Journal of Fluid Mechanics; 102; Jan. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Pathfinder model program for the National Transonic Facility (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An overview of the Pathfinder Models Program is presented. The Pathfinder program is a major research and development activity in support of the National Transonic Facility Activation Plan. The program scope, models design approach, and Pathfinder model configurations are presented along with a discussion of major supportive program activities. The anticipated design criteria for NTF models are presented.
    Keywords: AERODYNAMICS
    Type: High Reynolds Number Res. - 1980; p 37-52
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Ion thruster plume effects on spacecraft surfaces (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A charge-exchange plasma, generated by an ion thruster, is capable of flowing upstream from the ion thruster and therefore represents a source of contamination to a spacecraft. An analytical model of the charge-exchange plasma density around a spacecraft was used to estimate the contamination which various spacecraft materials may be exposed to. Measurements of plasma density around an ion thruster were compared to this model. Results of experimental studied regarding the effects on various spacecraft materials' properties due to exposure to expected mercury contamination levels are presented.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 231-241
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Ion plume/S-band carrier interaction study (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A study was performed to determine the effects of a mercury ion thruster plume on an S-band telecommunication carrier. Experiments were carried out on a 30 cm thruster in a JPL test chamber. Results from simple analytical models were compared with the above measurements and major discrepancies were discovered. Modifications to the electron density model provided a qualitative explanation, but further work is necessary for a quantitative answer. The results indicate the effects of the plume, on S and X Band telecommunications will be minor, with the possible exception of critical angle blockage.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 191-215
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Electromagnetic interference assessment of an ion drive electric propulsion system (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An electric propulsion thrust system has the capability of providing a high specific impulse for long duration scientific missions in space. The EMI from the elements of an ion engine was characterized. The compatibility of ion drive electric propulsion systems with typical interplanetary spacecraft engineering was predicted.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 185-190
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Radiated and conducted EMI from a 30-cm ion thruster (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: In order to properly assess the interaction of a spacecraft with the EMI environment produced by an ion thruster, the EMI environment was characterized. Therefore, radiated and conducted emissions were measured from a 30-cm mercury ion thruster. The ion thruster beam current varied from zero to 2.0 amperes and the emissions were measured from 5 KHz to 200 MHz. Several different types of antennas were used to obtain the measurements. The various measurements that were made included: magnetic field due to neutralizer/beam current loop; radiated electric fields of thruster and plume; and conducted emissions on arc discharge, neutralizer keeper and magnetic baffle lines.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 167-183
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Facility produced charge-exchange ions (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: These facility produced ions are created by charge-exchange collisions between neutral atoms and energetic thruster beam ions. The result of the electron transfer is an energetic neutral atom and an ion of only thermal energy. There are true charge-exchange ions produced by collisions with neutrals escaping from the ion thruster and being charge-exchange ionized before the neutral intercepts the tank wall. The facility produced charge-exchange ions will not exist in space and therefore, represent a source of error where measurements involving ion thruster plasmas and their density are involved. The quantity of facility produced ions in a test chamber with a 30 cm mercury ion thruster was determined.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 147-166
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Propagation of charge-exchange plasma produced by an ion thruster (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Under the proper conditions there is an end-effect of a long, cylindrical Langmuir probe which allows a significant increase in collected ion current when the probe is aligned with a flowing plasma. This effect was used to determine the charge-exchange plasma flow direction at various locations relative to the ion thruster. The ion current collected by the probe as a function of its angle with respect to the plasma flow allows determination of the plasma density and plasma flow velocity at the probe's location upstream of the ion thruster optics. The density values obtained from the ion current agreed to within a factor of two of density values obtained by typical voltage-current Langmuir probe characteristics.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 67-72
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Solar array/spacecraft biasing (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Biasing techniques and their application to the control of spacecraft potential is discussed. Normally when a spacecraft is operated with ion thrusters, the spacecraft will be 10-20 volts negative of the surrounding plasma. This will affect scientific measurements and will allow ions from the charge-exchange plasma to bombard the spacecraft surfaces with a few tens of volts of energy. This condition may not be tolerable. A proper bias system is described that can bring the spacecraft to or near the potential of the surrounding plasma.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 11-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Trailing edge noise prediction using Amiet's method (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Amiet's (1976, 1978) solution to the problem of airfoil trailing edge noise prediction is discussed in light of the results of evanescent wave theory's application to the measured surface pressure behavior near the trailing edge of an airfoil with a turbulent boundary layer. The method employed by Amiet has the advantage of incorporating the effect of finite chord in its solution. The assumed form of the pressure distribution is examined as well as the constant turbulent boundary layer convection assumption, which is found to be unnecessarily restrictive.
    Keywords: AERODYNAMICS
    Type: Journal of Sound and Vibration; 77; Aug. 8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Forebody drag reduction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: It is shown that the mechanisms of forebody drag reduction by means of either a spike or a forward-facing jet are similar, with the maximum achievable drag reduction being of the same order. Because the jet may be a relatively cool gas, however, the forward facing jet has the additional capability of reducing the aerodynamic heating that is so severe at high Mach numbers. By means of the correlation presented, jet ejection parameters may be chosen to achieve maximum permissible forebody drag reduction. The correlation method uses a momentum coefficient that characterizes jet efflux and freestream conditions.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Unsteady Newton-Busemann flow theory. II - Bodies of revolution (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A complete Newtonian flow theory is presented for unsteady flow past oscillating bodies of revolution of general shape at very high Mach numbers, consideration being given to a centrifugal force correction to the impact pressures. Expressions are obtained for the unsteady pressure and the stability derivatives are presented in closed form. It is stressed that the correction for the centrifugal force, which arises because of the curved trajectories that fluid particles follow along the surface subsequent to their impact, must not be neglected. If the correction is included, the theory is shown to be in excellent agreement with experimental results for relatively sharp cones. Theoretical results are in poor agreement with experimental results in air for bodies having moderate or large-nose bluntness.
    Keywords: AERODYNAMICS
    Type: AIAA Journal; 19; Oct. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Top-mounted inlet system feasibility for transonic-subsonic fighter aircraft applications (1981)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: To inlet flow field and engine inlet performance data for an advanced fighter aircraft configuration were obtained over the Mach 0.6 to 2.0 range. The studies not only provided extensive data for the baseline arrangement, but also evaluated the effects of key aircraft configuration variables (inlet location, canopy-dorsal integration, wing leading-edge extension planform area, and variable incidence canards) on top inlet performance. In order to set these data in the context of practical aircraft systems top inlet performance is compared with that of more conventional inlet/airframe integrations. The results of these evaluations show that, for the top inlet configuration tested, relatively good inlet performance and compatibility characteristics are maintained during subsonic and transonic maneuver. However, at supersonic speeds, flow expansion over the forebody and wings causes an increase in local inlet Mach number subsequently reduces inlet performance levels. These characteristics infer that although top inlets many not pose a viable design option for aircraft requiring a high degree of supersonic maneuverability, they have distinct promise for vehicles with subsonic and transonic maneuver capabilities.
    Keywords: AERODYNAMICS
    Type: AGARD Aerodyn. of Power Plant Installation; 17 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Impact of high-alpha aerodynamics on dynamic stability parameters of aircraft and missiles (1981)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: The aerodynamic phenomena associated with high angles of attack and their effects on the dynamic stability characteristics of airplane and missile configurations are examined. Information on dynamic effects is limited. Steady flow phenomena and their effects on the forces and moments are reviewed. The effects of asymmetric vortices and of vortex bursting on the dynamic response of flight vehicles are reviewed with respect to their influence on: (1) nonlinearity of aerodynamic coefficients with attitude, rates, and accelerations; (2) cross coupling between longitudinal and lateral directional models of motion; (3) time dependence and hysteresis effects; (4) configuration dependencey; and (5) mathematical modeling of the aerodynamics.
    Keywords: AERODYNAMICS
    Type: AGARD Dyn. Stability Parameters; 18 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    An assessment of theoretical models for viscous and transonic flow (1981)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: Topics discussed include shear flow models, simplified models for treating separation, classical linear theory, a local linearization theory, a transonic linear theory, a transonic nonlinear theory, the experiment of Davis, and the experiment of Tijdeman. It is concluded that shear flow models, which have proven very accurate in taking into account boundary layer effects for panel flutter, are likely to be less so for lifting surface flutter. For many applications in transonic flow, transonic linear theory will be adequate.
    Keywords: AERODYNAMICS
    Type: AGARD Boundary Layer Effects on Unsteady Airloads; 28 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Experimental studies of scale effects on oscillating airfoils at transonic speeds (1981)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: Scale effects are discussed with reference to a conventional airfoil (NACA 64A010) and a supercritical airfoil (NLR 7301) at mean flow conditions that support both weak and strong shock waves. During the experiment the Reynolds number was varied from 3 x 10 to the sixth power at time history data are presented over the range of reduced frequencies that are important in aeroelastic applications. The experimental data show that viscous effects are important in the case of the supercritical airfoil at all flow conditions and in the case of the conventional airfoil under strong shock wave conditions. Some frequency dependent viscous effects were also observed.
    Keywords: AERODYNAMICS
    Type: AGARD Boundary Layer Effects on Unsteady Airfoils; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Natural laminar flow data from full-scale flight and wind-tunnel experiments (1981)
    In:  Other Sources
    Details
    Publication Date: 2018-12-01
    Description: Experimental results obtained at NASA Langley during studies of natural laminar flow (NLF) over commercially produced aircraft surfaces are reported. The general aviation aircraft examined were light aircraft, yet displayed NLF extents close to the maximum available and equivalent to high performance business aircraft flying envelopes. Sublimating chemicals and acoustic detection techniques were employed to measure the boundary layer transition. Theoretical predictions of boundary layer stability were found to match well with the experimental data, with consideration given to both swept wings and the amplitudes of allowable waves on the airfoil surfaces. The presence of the NLF on the airfoil surfaces confirmed the benefits available from use of composite materials for airfoil surfaces.
    Keywords: AERODYNAMICS
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Natural Laminar Flow Flight Experiment (1981)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A supercritical airfoil section was designed with favorable pressure gradients on both the upper and lower surfaces. Wind tunnel tests were conducted in the Langley 8 Foot Transonic Pressure Tunnel. The outer wing panels of the F-111 TACT airplane were modified to incorporate partial span test gloves having the natural laminar, flow profile. Instrumentation was installed to provide surface pressure data as well as to determine transition location and boundary layer characteristics. The flight experiment encompassed 19 flights conducted with and without transition fixed at several locations for wing leading edge sweep angles which varied from 10 to 26 at Mach numbers from 0.80 to 0.85 and altitudes of 7620 meters and 9144 meters. Preliminary results indicate that a large portion of the test chord experienced laminar flow.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Advan. Aerodyn. and Active Controls; p 135-144
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Aerodynamic drag reduction tests on a box-shaped vehicle (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The intent of the present experiment is to define a near optimum value of drag coefficient for a high volume type of vehicle through the use of a boattail, on a vehicle already having rounded front corners and an underbody seal, or fairing. The results of these tests will constitute a baseline for later follow-on studies to evaluate candidate methods of obtaining afterbody drag coefficients approaching the boattail values, but without resorting to such impractical afterbody extensions. The current modifications to the box-shaped vehicle consisted of a full and truncated boattail in conjunction with the faired and sealed underbody. Drag results from these configurations are compared with corresponding wind tunnel results of a 1/10 scale model. Test velocities ranged up to 96.6 km/h (60 mph) and the corresponding Reynolds numbers ranged up to 1.3 x 10 to the 7th power based on the vehicles length which includes the boattail. A simple coast-down technique was used to define drag.
    Keywords: AERODYNAMICS
    Type: NASA-CR-176982 , NAS 1.26:176982
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Why use case studies rather than simulation-gaming techniques or library research? (1981)
    In:  Other Sources
    Details
    Publication Date: 2016-06-07
    Description: Method which present a student with a more challenging and true to life situation of needing to conduct research in a problem solving context--and not thinking about organization of format until research and thinking are complete are investigated. Simulation-gaming techniques which attempt to teach initiative and creativity that library research are used for this purpose. However, it is shown case studies provide the greatest opportunities to engage the students in problem solving situations in which they develop skills as researchers and writers.
    Keywords: AERODYNAMICS
    Type: NASA. Langley Research Center Tech. Commun., Pt. 1; p 99-103
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    The phenomenon of dynamic stall (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-01-25
    Description: Dynamic stall and its consequences which are important to aircraft design and operation are discussed. A certain degree of unsteadyness always accompanies the flow over streamlined bodies at high angle of attack, however, the stall of lifting surface undergoing unsteady motion is more complex than static stall. Dynamic stall remains a major unsolved problem with a variety of applications in aeronautics, hydrodynamics and wind engineering.
    Keywords: AERODYNAMICS
    Type: Von Karman Inst. for Fluid Dynamics Unsteady Airloads and Aeroelastic Probl. in Separated and Transonic Flow; 28 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Prediction of blade vortex interaction noise from measured blade pressure (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-01-25
    Description: The impulsive nature of noise due to the interaction of a rotor blade with a tip vortex is studied. The time signature of this noise is calculated theoretically based on the measured blade surface pressure fluctuation of an operational load survey rotor in slow descending flight and is compared with the simultaneous microphone measurement. Particularly, the physical understanding of the characteristic features of a waveform is extensively studied in order to understand the generating mechanism and to identify the important parameters. The interaction trajectory of a tip vortex on an acoustic planform is shown to be a very important parameter for the impulsive shape of the noise. The unsteady nature of the pressure distribution at the very leading edge is also important to the pulse shape. The theoretical model using noncompact linear acoustics predicts the general shape of interaction impulse pretty well except for peak amplitude which requires more continuous pressure information along the span at the leading edge.
    Keywords: AERODYNAMICS
    Type: DGLR Seventh European Rotorcraft and Powered Lift Aircraft Forum; 20 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Two-dimensional aerodynamic characteristics of an airfoil designed for two (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: An airfoil designed for helicopter rotor application is investigated. The airfoil is designed to increase maximum normal force coefficient while maintaining favorable drag divergence and pitching moment characteristics. Two modifications are also tested. Maximum normal force coefficient varies from 1.14 to 0.90 at Mach numbers from about 0.35 to 0.65. Both modifications decreased drag coefficient at zero normal force coefficient for Mach numbers near drag divergence, but were less beneficial at a normal force coefficient of -0.2.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1965 , L-14825 , NAS 1.60:1965 , AVRADCOM-TR-81-B-6
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Selected advanced aerodynamic and active control concepts development (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A task for the Energy Efficient Transport program conducted: (1) The design and wind tunnel development of high-aspect-ratio supercritical wings, investigating the cruise speed regime and also high-lift. (2) The preliminary design and evaluation of an aircraft combining a high-aspect-ratio supercritical wing with a winglet. (3) Active Controls: The determination of criteria, configuration, and flying qualities associated with augmented longitudinal stability of a level likely to be acceptable for the next generation transport; and the design of a practical augmentation system. The baseline against which the work was performed and evaluated was the Douglas DC-X-200 twin engine derivative of the DC-10 transport. The supercritical wing development showed that the cruise and buffet requirements could be achieved and that the wing could be designed to realize a sizable advantage over today's technology. Important advances in high lift performance were shown. The design study of an aircraft with supercritical wing and winglet suggested advantages in weight and fuel economy could be realized. The study of augmented stability, conducted with the aid of a motion base simulator, concluded that a negative static margin was acceptable for the baseline unaugmented aircraft.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3469 , NAS 1.26:3469
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Subsonic and transonic pressure measurements on a high-aspect-ratio supercritical-wing model with oscillating control surfaces (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A high aspect ratio supercritical wing with oscillating control surfaces is described. The semispan wing model was instrumented with 252 static orifices and 164 in situ dynamic pressure gases for studying the effects of control surface position and sinusoidal motion on steady and unsteady pressures. Data from the present test (this is the second in a series of tests on this model) were obtained in the Langley Transonic Dynamics Tunnel at Mach numbers of 0.60 and 0.78 and are presented in tabular form.
    Keywords: AERODYNAMICS
    Type: NASA-TM-83201 , L-14831 , NAS 1.15:83201
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Feasibility study of LITVC for shuttle SRB (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A liquid injection thrust vector control (LITVC) system for the shuttle solid rocket booster (SRB) was analyzed. The LITVC was compared with the SRB baseline flexible seal. A table of LITVC advantages and disadvantages is presented. It is concluded that the LITVC performs well at low to moderate duty cycles, but not for high duty cycle requirements.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-TP-1912 , M-354
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Unpowered Aerodynamic Characteristics of a 15-Percent Scale Model of a Twin-Engine Commuter Aircraft (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: An experimental investigation was conducted in the Ames 12-Foot Pressure Wind Tunnel to determine the unpowered aerodynamic characteristics of a 15-percent-scale model of a twin-engine commuter aircraft. Model longitudinal aerodynamic characteristics were examined at discrete flap deflections for various angle-of-attack and wind-tunnel-velocity ranges with the empennage on and off. Data are presented for the basic model configuration consisting of the fuselage, wing, basic wing leading edge, double slotted flaps, midengine nacelles, and empennage. Other configurations tested include a particle-span drooped leading edge (dropped outboard of the engine nacelles), a full-span drooped leading edge, low- and high-mounted engine nacelles, and a single-slotted flap. An evaluation was made of the model mounting system by comparing data obtained with the model mounted conventionally on the wind-tunnel model-support struts and the model inverted.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81284 , A-8552
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    The influence of unsteady aerodynamics on hingeless rotor ground resonance (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Calculations of the model frequency and damping for a hingeless rotor on a gimballed support in hover are compared with measured results for two configurations (differing in blade flap stiffness). Good correlation is obtaned when an inflow dynamics model is used to account for the influence of the unsteady aerodynamics. The effect of the unsteady aerodynamics is significant for this rotor system. The inflow dynamics model introduces additional states corresponding to perturbations of the wake-induced velocity at the rotor disk. The calculations confirm the experimental observation that the inflow mode introduced by these additional states is measurable for one configuration but not for the other.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81302 , A-8635 , USAAVRADCOM-TR-81-B-16
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Cold-air performance of compressor-drive turbine of Department of Energy upgraded automobile gas turbine engine. 1: Volute-manifold and stator performance (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The aerodynamic performance of the inlet manifold and stator assembly of the compressor drive turbine was experimentally determined with cold air as the working fluid. The investigation included measurements of mass flow and stator-exit fluid torque as well as radial surveys of total pressure and flow angle at the stator inlet and annulus surveys of total pressure and flow angle at the stator exit. The stator-exit aftermixed flow conditions and overall stator efficiency were obtained and compared with their design values and the experimental results from three other stators. In addition, an analysis was made to determine the constituent aerodynamic losses that made up the stator kinetic energy loss.
    Keywords: AERODYNAMICS
    Type: NASA-TM-82682 , DOE/NASA/1011-34 , E-572 , AVRADCOM-TR-80-C-20
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    An experimental investigation of the aerodynamics and cooling of a horizontally-opposed air-cooled aircraft engine installation (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A flight-test based research program was performed to investigate the aerodynamics and cooling of a horizontally-opposed engine installation. Specific areas investigated were the internal aerodynamics and cooling mechanics of the installation, inlet aerodynamics, and exit aerodynamics. The applicable theory and current state of the art are discussed for each area. Flight-test and ground-test techniques for the development of the cooling installation and the solution of cooling problems are presented. The results show that much of the internal aerodynamics and cooling technology developed for radial engines are applicable to horizontally opposed engines. Correlation is established between engine manufacturer's cooling design data and flight measurements of the particular installation. Also, a flight-test method for the development of cooling requirements in terms of easily measurable parameters is presented. The impact of inlet and exit design on cooling and cooling drag is shown to be of major significance.
    Keywords: AERODYNAMICS
    Type: NASA-CR-3405
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Orbit transfer vehicle engine study, phase A, extension 1: Volume 2: Study results (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Because of the advantage of the Advanced Expander Cycle Engine brought out in initial studies, further design optimization and comparative analyses were undertaken. The major results and conclusion derived are summarized. The primary areas covered are (1) thrust chamber geometry optimization, (2) expander cycle optimization, (3) alternate low thrust capability, (4) safety and reliability, (5) development risk comparison, and (6) cost comparisons. All of the results obtained were used to baseline the initial design concept for the OTV Advanced Expander Cycle Engine Point Design Study.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-161699 , REPT-32999-F-E1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    An experimental and analytical investigation of the aerodynamics of a hypersonic vehicle at free stream Mach 6 (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The goal of this research is the assessment of the validity of existing three dimensional numerical programs in the prediction of the flow fields about general three dimensional hypersonic bodies. A detailed experimental research program was performed in which surface and flow field pressures were mapped. The results of the experimental work were compared with existing inviscid programs. Improvements were made on the existing numerical methods to include angle of attack. A summary of this work is presented.
    Keywords: AERODYNAMICS
    Type: NASA-CR-164133
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Aerodynamic preliminary analysis system 2. Part 2: User's manuals (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: An aerodynamic analysis system based on potential theory at subsonic/supersonic speeds and impact type finite element solutions at hypersonic conditions is described. Three dimensional configurations having multiple nonplanar surfaces of arbitrary planform and bodies of noncircular contour may be analyzed. Static, rotary, and control longitudinal and lateral directional chracteristics may be generated. The analysis has been implemented on a time sharing system in conjunction with an input tablet digitizer and an interactive graphics input/output display and editing terminal to maximize its responsiveness to the preliminary analysis problem. Typical simulation indicates that program provides an efficient analysis for systematically performing various aerodynamic configuration tradeoff and evaluation studies.
    Keywords: AERODYNAMICS
    Type: NASA-CR-165628 , NA-80-374-PT-2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Aerodynamic prediction techniques for hypersonic configuration design (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: An investigation of approximate theoretical techniques for predicting aerodynamic characteristics and surface pressures for relatively slender vehicles at moderate hypersonic speeds was performed. Emphasis was placed on approaches that would be responsive to preliminary configuration design level of effort. Potential theory was examined in detail to meet this objective. Numerical pilot codes were developed for relatively simple three dimensional geometries to evaluate the capability of the approximate equations of motion considered. Results from the computations indicate good agreement with higher order solutions and experimental results for a variety of wing, body, and wing-body shapes for values of the hypersonic similarity parameter M delta approaching one.
    Keywords: AERODYNAMICS
    Type: NASA-CR-165651 , NA-80-611
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Some effects of thermal-cycle-induced deformation in rocket thrust chambers (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The deformation process observed in the hot gas side wall of rocket combustion chambers was investigaged for three different liner materials. Five thrust chambers were cycled to failure by using hydrogen and oxygen as propellants at a chamber pressure of 4.14 MN/cu m. The deformation was observed nondestructively at midlife points and destructively after failure occurred. The cyclic life results are presented with an accompanying discussion about the problems of life prediction associated with the types of failures encountered in the present work. Data indicating the deformation of the thrust chamber liner as cycles are accumulated are presented for each of the test thrust chambers. From these deformation data and observation of the failure sites it is evident that modeling the failure process as classic low cycle thermal fatigue is inadequate as a life prediction method.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-TP-1834 , E-553
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Dual nozzle aerodynamic and cooling analysis study (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Analytical models to predict performance and operating characteristics of dual nozzle concepts were developed and improved. Aerodynamic models are available to define flow characteristics and bleed requirements for both the dual throat and dual expander concepts. Advanced analytical techniques were utilized to provide quantitative estimates of the bleed flow, boundary layer, and shock effects within dual nozzle engines. Thermal analyses were performed to define cooling requirements for baseline configurations, and special studies of unique dual nozzle cooling problems defined feasible means of achieving adequate cooling.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-161677 , REPT-33553F
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    The phenomenon of dynamic stall (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The general features of dynamic stall on oscillating airfoils are explained in terms of the vortex shedding phenomenon, and the important differences between static stall, light dynamic stall, and deep stall are described. An overview of experimentation and prediction techniques is given.
    Keywords: AERODYNAMICS
    Type: NASA-TM-81264 , A-8464
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Aeropropulsive characteristics of twin nonaxisymmetric vectoring nozzles installed with forward-swept and aft-swept wings (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: An investigation was conducted in the Langley 16 Foot Transonic Tunnel to determine the aeropropulsive characteristics of a single expansion ramp nozzle (SERN) and a two dimensional convergent divergent nozzle (2-D C-D) installed with both an aft swept and a forward swept wing. The SERN was tested in both an upright and an inverted position. The effects of thrust vectoring at nozzle vector angles from -5 deg to 20 deg were studied. This investigation was conducted at Mach numbers from 0.40 to 1.20 and angles of attack from -2.0 deg to 16 deg. Nozzle pressure ratio was varied from 1.0 (jet off) to about 9.0. Reynolds number based on the wing mean geometric chord varied from about 3 million to 4.8 million, depending upon free stream number.
    Keywords: AERODYNAMICS
    Type: NASA-TP-1778 , L-13902
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Experimental investigation of vortices shed by various wing fin configurations (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Forty-six different fins, which were members of twelve plan-form families, were tested. A two dimensional Boeing single element airfoil at an angle of attack of eight degrees and a sweepback angle of thirty-two was used to simulate a portion of the wing of a generator aircraft. Various free stream velocities were used to test any individual fin at its particular angle of attack. While the fin itself was mounted on the upper surface of the generator model, the angle of attack of each fin was varied until stall was reached and/or passed. The relative fin vortex strengths were measured in two ways. First, the maximum angular velocity of a four blade rotor placed in the fin vortex center was measured with the use of a stroboscope. Second, the maximum rolling moment on a following wing model placed in the fin vortex center was measured by a force balance.
    Keywords: AERODYNAMICS
    Type: NASA-CR-163874 , ISU-ERI-AMES-81112
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Computer code for charge-exchange plasma propagation (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-06-28
    Description: The propagation of the charge-exchange plasma from an electrostatic ion thruster is crucial in determining the interaction of that plasma with the associated spacecraft. A model that describes this plasma and its propagation is described, together with a computer code based on this model. The structure and calling sequence of the code, named PLASIM, is described. An explanation of the program's input and output is included, together with samples of both. The code is written in ASNI Standard FORTRAN.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 73-145
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    Charge-exchange plasma environment for an ion drive spacecraft (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-06-28
    Description: A model was reviewed which describes the propagation of the mercury charge-exchange plasma and extended to describe the flow of the molybdenum component of the charge-exchange plasma. The uncertainties in the models for various conditions are discussed. Such topics as current drain to the solar array, charge-exchange plasma material deposition, and the effects of space plasma on the charge-exchange plasma propagation are addressed.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JPL-PUB-79-90 , Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 29-66
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Experimental and analytical evaluation of ion thruster/spacecraft interactions (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Studies were conducted to both identify the environment produced by ion thrusters and to assess the interaction of this environment on a typical spacecraft and typical science instruments. Spacecraft charging and the charge exchange that accompanies it is discussed in detail. Electromagnetic interference was characterized for ion engines. The electromagnetic compatibility of ion thrusters with spacecraft instruments was determined. The effects of ion thruster plumes on spacecraft were studied with particular emphasis on external surface currents.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-163975 , JPL-PUB-80-92
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...