ALBERT

Description: Beschreibung des Zusammenhangs zwischen der Eizahl und der Kokonzahl der Kiefernhornblattwespe auf das Massenauftreten KATASTER-BESCHREIBUNG: Betimmung der kritischen Anzhal Eier und der kritischen Anzahl Winter- und Sommerkokons für das Massenauftreten KATASTER-DETAIL:

Description: Untersuchungen zu biotischen und abiotischen Ursachen für den Zusammenbruch der Population der Kiefernbuschhornblattwespe KATASTER-BESCHREIBUNG: Ursachen für den Zusammenbruch der Kiefernbuschhornblattwespen-Population neben dem harten Winter 1939/40 eine andauernde Schönwetterperiode Ende April/Anfang Mai und vor allem stärkere Vermehrung der Feinde KATASTER-DETAIL: Delta sonn +, (April-Mai) führte zu erhöhten Vertrocknen der Kokons der Kiefernbuschhornblattwespe im Jahr 1940

Description: Beschreibung der Massenvermehrung der Kiefernblattwespe, Hauptgrung ist die Umwandlung von ursprünglich Laubwaldgesellschaften in reine Kieferngesellschaften, Bedeutung der Temperatur für das Überliegen der Larven KATASTER-BESCHREIBUNG: Temperatur und Luftfeuchte für das Überliegen der Larven entscheidend und damit auch für ein Massenauftreten im darauffolgenden Jahr, Begünstigung der Parasitierung der Kieferblattwespe KATASTER-DETAIL: Delta T- (Juli-August und im Winter), dann Geschlechterfolge von Diprion pini stark dezimiert

Description: Vertrockungnung der Eberesche, der Salweide durch den Befall mit Kleinschmetterlingen, bzw. Käfern und sekundär Pilzen, Bescchreibung der Prozesse und Auswirkungen KATASTER-BESCHREIBUNG: KATASTER-DETAIL:

Description: Auswertung verschiedener Parameter (Nonnenraupen, Falterflug) in unterschiedlichen Überwachungsbereichen der Forstentomologischen Dienststellen, Befallsermittlungsverfahren nach der Wellensteinschen Methode KATASTER-BESCHREIBUNG: Rhytmische Schwankungen der plötzlichen Übervermehrung, 10 oder 12 jährige Perioden, Bezug zu Schwankungen der Umweltbedingungen KATASTER-DETAIL:

Description: Solid propellant boosters for manned space flight

Description: The Aspirating Seal GE90 test for engine applications is presented.

Description: This proposal fits within the programmatic long-term development direction for turbine engine seals of the Seal Team of the Mechanical Component Branch. The intended work concerns the further development of the Finger Seal concept which is a compliant passive-adaptive seal meant to mitigate (and eventually replace) the shortcomings of the entire class of rigid seals used today (labyrinth, honeycomb, mechanical face seals) in the gas turbines and compressors,

Description: NASA Glenn hosted the Seals/Secondary Air System Workshop on October 30-31, 2001. Each year NASA and our industry and university partners share their respective seal technology developments. We use these workshops as a technical forum to exchange recent advancements and "lessons-learned" in advancing seal technology and solving problems of common interest. As in the past we are publishing two volumes. Volume I will be publicly available and individual papers will be made available on-line through the web page address listed at the end of this chapter. Volume II will be restricted under International Traffic and Arms Regulations (I.T.A.R.) and/or Export Administration Regulations (E.A.R.).

Description: This report describes the Mirror Transport Mechanism (MTM), which supports a pair of dihedral mirrors and moves them in a very smooth and uniform scanning motion normal to a beamsplitter. Each scan is followed by a quick flyback and repeat. Included in the report will be material selection, design, and testing of all major components of the MTM in order to meet the stringent performance requirements under cryogenic conditions and survive the launch environment of the shuttle. Areas to be discussed in detail will be those in which failures or performance anomalies occurred and their solutions. Typically, this will include (but not to be limited to) flex pivot failures during vibration testing, excessive dihedral platform sag under one "g" operation, electronic and fiber optic characteristics, and tolerancing considerations. As of this writing, development of the mechanism has reached the final phase of thermal and vibration qualification. Environmental testing of the complete FIRAS (Far Infrared Absolute Spectrophotometer) experiment is just beginning.

Description: NASA Glenn Research Center (GRC) has developed a Fault-Tolerant Magnetic Bearing Suspension rig to enhance the bearing system safety. It successfully demonstrated that using only two active poles out of eight redundant poles from each radial bearing (that is, simply 12 out of 16 poles dead) levitated the rotor and spun it without losing stability and desired position up to the maximum allowable speed of 20,000 rpm. In this paper, it is demonstrated that as far as the summation of force vectors of the attracting poles and rotor weight is zero, a fault-tolerant magnetic bearing system maintained the rotor at the desired position without losing stability even at the maximum rotor speed. A proportional-integral-derivative (PID) controller generated autonomous corrective actions with no operator's input for the fault situations without losing load capacity in terms of rotor position. This paper also deals with a centralized modal controller to better control the dynamic behavior over system modes.

Description: Unloaded gas, plain journal bearings experience sub-synchronous whirl motion due to fluid film instabilities and wall contact usually occurs immediately after the onset of the whirl motion. An alternative is the wave journal bearing which significantly improves bearing stability. The predicted threshold where the sub-synchronous whirl motion starts was well confirmed by the experimental observation. In addition, both a two-wave and a three-wave journal bearing can operate free of sub-synchronous whirl motion over a large range in speeds. When the sub-synchronous whirl motion occurs, both the two-wave and three-wave bearing can run in a whirl orbit well within the bearing clearance. At large clearances and wave amplitudes a two-wave bearing, unliKe other bearings, can exhibit a sub-synchronous whirl movement at both low and high speeds, but can run extremely stable and without whirl at intermediate speeds. Moreover, in these cases, the whirl frequencies are close to a quarter of the synchronous speed. The three-wave bearing can exhibit sub-synchronous whirl motion only after a specific threshold when the speed increases and the whirl frequencies are close to half of the synchronous speed.

Description: This presentation will summarize Pratt & Whitney's past, present, and future activities toward cryogenic fluid-film bearing and seal technology development and implementation. The three major areas of focus for this technology are analytical models and design tools, component testing, and technology implementation. The analytical models and design tools area will include a summary of current tools along with an overview of P&W's new full 3-D Navier-Stokes solution for hydrostatic bearings, HYDROB3D. P&W's comprehensive component test program, including teaming with the Air Force Phillips Laboratory, NASA's Marshall Space Flight Center, and Carrier Corporation, will be outlined. Component test programs consisting of material development and testing, surface patterns/roughness, pocket and orifice geometry variations, and static and dynamic performance of both journal and thrust bearings will be summarized. Finally, the technology implementation area will show the benefits and plans for P&W to incorporate this technology into products.

Description: Brush seals are compliant, contact seals that have long-life, low-leakage characteristics desirable for use in rocket engine turbopumps. 50.8-mm (2.0 inch) diameter brush seals with a nominal initial radial interference of 0.127-mm (0.005 inch) were tested in liquid nitrogen at shaft speeds up to 35,000 rpm and differential pressure loads up to 1.21 MPa (175 psi) per brush. The measured leakage rate of a single brush was 2-3 times less than that measured for a 12-tooth, 0.127-mm (0.005 inch) radial clearance labyrinth seal used as a baseline. Stage effects were studied and it was found that two brush seals with a large separation distance leaked less than two brushes tightly packed together. The maximum measured groove depth on the Inconel 718 rotor was 25.4 (mu)m (0.001 inch) after 4.31 hours of shaft rotation. The Haynes-25 bristles wore approximately 25.4-76.2 (mu)m (0.001-0.003 inch) under the same conditions. Three seal runner coatings, chromium carbide, Teflon impregnated chromium, and zirconium oxide, were tested in liquid hydrogen at 35,000 and 65,000 rpm with separate 50.8 mm diameter brush seals made of Haynes-25 bristles and having a nominal initial radial interference of 129 rpm. Two bare Inconel-718 rotors were also tested as a baseline. The test results revealed significant differences between the wear characteristics of the uncoated and coated seal runners. At both speeds the brush seal with the bare Inconel-718 seal runner exhibited significant bristle wear with excessive material transferring to the runner surface. In contrast, the coated seal runners inhibited the transfer and deposit of bristle material. The chromium carbide coating showed only small quantities of bristle material transferring to its surface. The Teflon impregnated chromium coating also inhibited material transfer and provided some lubrication. This coating, however, is self-sacrificing. The Teflon remained present on the low speed runner, but it was completely removed from the high speed brush seal, which was tested considerably longer. The tests of the Teflon coating revealed the importance of using a lubricating and low friction coating for brush seals to reduce bristle and seal runner wear. The zirconium oxide coating exhibited the greatest amount of coating wear, while the brushes incurred only slight wear. Further testing of ceramics is recommended before making a final judgement on the viability of ceramic coatings for brush seals because of the contrast between the results reported by Carlile and the results presented herein. Strictly based on the results presented hereinabove, the chromium carbide and Teflon impregnated chromium coatings were considered preferable to the uncoated Inconel-718 and zirconium oxide coatings because of their good wear resistance and characteristics to inhibit bristle material wear and transfer to the seal runner.

Description: In this paper, the two dimensional(radial and circumferential) transient Navier-Stokes equations are used to solve the hydrodynamic problem in conjunction with the time dependent motion of the journal, and the deformable, spring supported foil. The elastic deformation of the foil and its supports are simulated by a finite element model. The time-dependent Navier-Stokes formulation is used to solve for the interaction between the fluid lubricant, the motion of the journal and the deformable foil boundary. The steady state, the quasi-transient and the full transient dynamic simulation of the foil-fluid journal interaction are examined on a comparative basis. For the steady state simulation, the fluid lubricant pressures are evaluated for a particular journal position, by means of an iterative scheme until convergence is achieved in both the fluid pressures and the corresponding foil deformation. For the quasi-transient case, the transient motion of the journal is calculated using a numerical integration scheme for the velocity and displacement of the journal. The deformation of the foil is evaluated through numerical iteration in feedback mode with the fluid film pressure generated by the journal motion until convergence at every time step is achieved. For the full transient simulation, a parallel real-time integration scheme is used to evaluate simultaneously the new journal position and the new deformed shape of the foil at each time step. The pressure of the fluid lubricant is iterated jointly with the corresponding journal position and the deformed foil geometry until convergence is achieved. A variable time-stepping Newmark-Beta integration procedure is used to evaluate the transient dynamics at each time step of the bearing.

Description: The aero design of an inward pumping spiral groove face seal using an in-house spread sheet was compared with predictions from the NASA code SPIRALG. The high pressure compressor exit of an aero gas turbine was chosen as the location for the candidate seal. This is a challenging environment as rotational velocity, pressure drop, and temperature are high. This presentation compares the resulting lift forces, leakages, and friction loss for various ride heights. Within practical ranges of ride height, the lift force predictions agreed well. However, both leakage and friction loss predictions were significantly different.

Description: Selection of high thrust launch vehicles

Description: A consortium has been formed to address seal problems in the Aerospace sector of Allied Signal, Inc. The consortium is represented by makers of Propulsion Engines, Auxiliary Power Units, Gas Turbine Starters, etc. The goal is to improve Face Seal reliability, since Face Seals have become reliability drivers in many of our product lines. Several research programs are being implemented simultaneously this year. They include: Face Seal Modeling and Analysis Methodology; Oil Cooling of Seals; Seal Tracking Dynamics; Coking Formation & Prevention; and Seal Reliability Methods.

Description: We report a new measurement of the cosmic-ray isotopic composition of aluminum in the low-energy range form 75 to 206 MeV per nucleon.This measurement was made using the high-energy telescope of the CRS experiment on the Voyager 1 and 2 spacecraft during the time period from 1977 to 1993 with an average solar modulation level about 497 MV, roughly the same as at Earth near sunspot minimum. We obtain approximately 430 Al events of which approximately 35 are Al-26 and 395 are Al-27. The Al isotopes were separated with an average mass resolution sigma of 0.35 amu. Our interpretation of the isotopic composition of cosmic-ray aluminum is based on a standard Leaky-Box model for the interstellar propagation of cosmic-ray nuclei using the latest cross sections of the New Mexico-Saclay collaboration as well as a disk-halo diffusion model. From our observed ratio Al-26/Al-27 of 8.3 +/- 2.4 % we deduce an average interstellar density of about 0.52 (+0.26, -0.2) atoms per cu cm. This density is larger than the value of 0.28 (+0.14, -0.11) atoms per cu cm we found from an analysis of the observed abundance of the longer lived Be-10 made using data from the Voyager detectors over almost the same time interval and using essentially the same propagation program.

Description: The Short Orbital Flux Integration Program, SOFIP, was developed to provide a fast and accurate evaluation of the space radiation environment expected to be encountered by geocentric satellites. SOFIP uses Vette's standardized models of the terrestrial trapped particle environment in performing the evaluation. For a given trajectory, the basic analysis involves the calculation of the composite integral orbit spectrum of either protons or electrons. Additional calculations which may be performed include exposure index, peaks per orbit, percent time in electron trapping zones, differential spectrum, and solor proton fluences. The results of the SOFIP calculations should provide the analyst with a detailed picture of the radiation environment in which the vehicle will operate. This program is written in FORTRAN IV for batch execution and has been implemented on an IBM 360 computer with a central memory requirement of approximately 60K of 8 bit bytes. The SOFIP program was developed in 1979.

Description: An overview of galactic cosmic ray (GCR) interaction and transport methods, as implemented in the Langley Research Center GCR transport code, is presented. Representative results for solar minimum, exo-magnetospheric GCR dose equivalents in water are presented on a component by component basis for various thicknesses of aluminum shielding. The impact of proposed changes to the currently used quality factors on exposure estimates and shielding requirements are quantified. Using the cellular track model of Katz, estimates of relative biological effectiveness (RBE) for the mixed GCR radiation fields are also made.

Description: We conduct a Monte Carlo simulation of the cosmic microwave background (CMB) anisotropy in the UCSB South Pole 1991 degree-scale experiment. We examine cold dark matter cosmology with large-scale structure seeded by the Harrison-Zel'dovich hierarchy of Gaussian-distributed primordial inhomogeneities normalized to the COBE-DMR measurement of large-angle CMB anisotropy. We find it statistically implausible (in the sense of low cumulative probability F lower than 5 percent, of not measuring a cosmological delta-T/T signal) that the degree-scale cosmological CMB anisotropy predicted in such models could have escaped a detection at the level of sensitivity achieved in the South Pole 1991 experiment.

Description: Several gamma-ray bursts in the BATSE data have sufficiently long durations and complex temporal structures with pulses that appear to be spaced quasi-periodically. In order to test and quantify these periods we have applied fast Fourier transformations (FFT) to all these events. We have also performed cross spectral analyses of the FFT of the two extreme (high-low) energy bands in each case to determine the lead/lag of the pulses in different energies.

Description: A cursory examination of cosmic gamma-ray burst time profiles indicates an inhomogeneous distribution of structure. In the first approximation, there seem to be two types of profiles; smooth ones with little structure and highly variable ones with lots of structure. To put this observation to the test, we have examined the statistical nature of the profile derivative to choose which parameter might best be called the burst 'spikiness'. We have found that a good estimator is given by a count of the number of 'spikes' (defined by a specific numerical recipe) and not by the rms deviations from either a pre-burst background or any type of moving average background. The application of this parameter to 30 burst time histories shows it to be consistent over a wide range of profile types. The analysis also reveals a preferred average time between spikes of approximately 1.5 seconds.

Description: Most cosmic gamma-ray burst temporal profiles appear to be comprised of several individual pulses, many of which overlap. It is advantageous to deconvolve the temporal structures into their constituent pulses, and thereby investigate the shape, intensity and temporal distributions of the pulses as a function of energy. Such fundamental pulse descriptors would provide constraints for theoretical modeling of the burst emission process, such as indications of source size, optical depth and geometry, as a function of time. We have developed a deconvolution algorithm which treats sequences of pulse shapes that change deterministically. The algorithm, a generalization of autoregressive techniques, has been applied to a few bright bursts observed by BATSE. Results indicate that, even within short intervals, constituent pulses are not self-similarly shaped, nor do pulse shapes evolve in a simple manner throughout a burst. Hence, the direction of our future work on pulse deconvolution will focus on analysis methods which allow pulse shape to vary.

Description: Resonant Compton upscattering is commended as a mechanism that produces a hard gamma-ray spectrum while suppressing X-rays. This model, however, has severe physical and observational limitations. Effective X-ray suppression places a lower limit on the electron density; above this limit X-rays scatter multiple times, so the single-scattering approximation of this mechanism is invalid. Multiple scattering produces a spectrum that is much harder than the single-scattering spectrum. As the Thomson optical depth of a power-law electron beam approaches unity, photon spawning commences at a high rate and physically invalidates the underlying electron distribution. The Compton upscattering model is therefore only valid over a narrow range of electron densities. An observational consequence of this model is the absence of the third cyclotron resonance. Resonant scattering produces gamma-rays that propagate nearly along the magnetic field. The resonant cross section of the third harmonic, which is strongly angle dependent, falls below the Compton continuum for these gamma rays. The observation of a third cyclotron resonance in a gamma-ray burst spectrum would eliminate resonant Compton scattering as a gamma-ray burst process.

Description: Fifteen KONUS bursts and one HEAO burst showing cyclotron lines have well measured positions. If these are due to strongly magnetized neutron stars then we expect them to be associated with the galactic disk with a scale height of about 500 pc as expected for old neutron stars. The simplest way to test this hypothesis would be to test for a concentration along galactic latitude /b/ = 0. We got a marginal indication of such a concentration, and the probability that the 16 events are isotropically distributed is 0.02. We also show that this result is not in conflict with the present BATSE data set.

Description: Conclusions about the nature of gamma-ray bursts derived from the size-frequency distribution may be altered if a significant correlation exists between burst intensity and spectral shape. Moreover, if gamma-ray bursts have a cosmological origin, such a correlation may be expected to result from the expansion of the universe. We have performed a rudimentary search of the BATSE bursts for hardness/intensity correlations. The range of spectral shapes was determined for each burst by computing the ratio of the intensity in the range 100-300 keV to that in 55-300 keV. We find weak evidence for the existence of a correlation, the strongest effect being present when comparing the maximum hardness ratio for each burst with its maximum rate.

Description: We present preliminary analyses of gamma-ray burst spectra from the BATSE Spectroscopy Detectors. Our conclusions are: (1) No spectral lines have yet been detected in BATSE data from any cosmic gamma-ray burst. This is not surprising as the data for few bright bursts is available, and previous experiments saw lines in only a small fraction of the bursts. (2) Burst spectra show emission up to 20 MeV, with four of eight examined bursts having significant spectral breaks from 1 to 2 MeV. These breaks are consistent with opacity effects due to the interaction of photons with a high magnetic field. (3) Various distance independent parameters from burst spectra and time histories have no correlation with parameters related to distance. In other words, bright bursts look the same as faint bursts. This places a strong constraint on two population models of bursts. (4) The detection time of individual photons is not correlated from detector to detector, as predicted by Mitrofanov's pulsed emission model.

Description: The GRB angular/intensity distributions observed by BATSE greatly constrain models of the spatial and luminosity source distributions. Single populations of Galactic Disk and Galactic Halo sources appear to be untenable, and only a limited subset of models made up of sources in a symmetric Galactic Corona satisfy the observations. Comments are made on other classes of models.

Description: The Energetic Gamma Ray Experiment Telescope (EGRET) on the Compton Gamma Ray Observatory has observed energetic gamma ray bursts and flares. On May 3, 1991, EGRET detected a gamma ray burst both in the energy measuring NaI (Tl) scintillator and independently in the spark chamber imaging assembly. The NaI spectra were accumulated by a special BURST mode of EGRET. The spectra were measured over a range from 1 to 200 MeV, in three sequential spectra of 1,2, and 4 seconds. During the peak of the burst, six individual gamma rays were detected in the spark chamber, allowing a determination of the burst arrival direction. The intense flares of June were also detected. A solar flare on June 4 was observed to last for several minutes and for a brief time, less than a minute, had significant emission of gamma rays exceeding 150 MeV.

Description: Gamma-ray bursts are being detected with unprecedented sensitivity by the Burst and Transient Source Experiment (BATSE) on the Compton Gamma Ray Observatory since its launch in April, 1991. The experiment is detecting about one gamma-ray burst per day. A brief description is presented of the on-orbit performance of BATSE, the methods of identification of bursts, and examples of the diverse time profiles of the gamma-ray bursts observed. The most significant finding thus far is the apparent isotropy of the bursts together with the observed inhomogeneity of the sources.

Description: Using the radio through hard X-ray images of the Crab nebula to derive the spatial dependence of the electron spectrum and the magnetic field distribution from MHD flow models, we have rederived the high-energy spectrum of inverse Compton scattered gamma rays. We find agreement with the observed spectrum at TeV energies, but it is clear that the inverse Compton flux does not contribute significantly to the unpulsed nebular emission observed by COS-B from 50 to 500 MeV, which is consistent with a smooth continuation of the spectrum in hard X-rays. The emission at these energies must therefore be due to synchrotron radiation by electrons of at least PeV energies. It appears that the emission in the high-energy gamma-ray range, sensitive to the highest energy electrons in the nebula, can put interesting constraints on the acceleration mechanism.

Description: The theory of magnetospheric recirculation for cyclic electron energization and transport may apply in part to heliospheric transport of Jovian electrons if enhanced cross-IMF propagation occurs at heliospheric altitudes near and below the solar wind transition region. Low altitude, ecliptic-to-polar transport would short-circuit conventional interplanetary diffusion, facilitate rapid access to the polar heliosphere with minimal adiabatic energy losses, and provide a seed population for acceleration to 100-1000 MeV energies at the solar wind termination shock and in the heliomagnetotail.

Description: Previous applications of the Monte Carlo technique at the quasiparallel earth bow shock has motivated the extension of this technique to oblique shock geometries typical of those found in most astrophysical shock environments. In addition, such a generalization will permit the thorough examination of theoretical predictions of rapid acceleration times at quasi-perpendicular shocks. Therefore, we have embarked on the modification of our existing Monte Carlo code and in this paper outline the major technical aspects involved in developing a simulation of cosmic-ray acceleration at modified oblique nonrelativistic shocks.

Description: Since the trajectories of astrophysical charged particles are bent by magnetic fields and normally curl many times before their detection, their origin may not be inferred from their directions as is the case with photons. Fortunately, charged particles reveal their presence through interactions in many instances leading to high-energy gamma rays. Bremsstrahlung, Compton, synchrotron, and curvature radiation all generally have a monotonically decreasing energy spectra reflecting that of the parent particles, whereas nucleon-nucleon radiation has a maximum at about 70 MeV reflecting the nature of the interaction process. Gamma radiation has been seen coming from neutron stars in pulses with the same period as the radio pulsar. Solar gamma rays also have been seen, as have short bursts of gamma rays whose origin remain a mystery. Galactic diffuse gamma radiation reveals the distribution of cosmic rays in our Galaxy. Beyond our Galaxy, active galaxies are seen in gamma rays implying a huge energy in the form of cosmic rays to be present there. The Optically Violent Variable quasar 3C 279 is particularly astounding. During an active state 3C 279 was seen to be emitting approximately 10 exp 48 erg/s if its radiation is isotropic.

Description: The Burst and Transient Spectroscopy Experiment (BATSE) on the Compton Gamma-Ray Observatory has a powerful capability to provide nearly uninterrupted monitoring in the 25 keV-10 MeV range of both AGN and Galactic black hole candidates such as Cygnus X-1, using the occultation of cosmic sources by the Earth. Progress in background modeling indicates that the data accept region, or fit window tau, around the occultation step can be substantially increased over that conservatively assumed in earlier estimates of BATSE's Earth occultation sensitivity. We show samples of large-tau fits to background and source edges. As a result we expect to be able to perform long-term monitoring of Cygnus X-1 and many of the brighter AGN for the duration of the CGRO mission.

Description: We examine the COBE Differential Microwave Radiometer (DMR) data for evidence of noncosmological source contributions. The DMR maps are cross-correlated with maps of rich clusters, extragalactic IRAS sources, HEAO 1 A-2 X-ray emission, and 5 GHz radio sources. We limit the rms contributions from these sources on a 7 deg angular scale to less than 10 micro-K (95 percent confidence level) in the DMR maps, although the LMC probably contributes about 50 micro-K to a limited region of the sky. Thus, our previous interpretation that the fluctuations in the COBE DMR data are most likely due to cosmic fluctuations at the surface of last scattering remains intact. The Comptonization parameter for hot electrons traced by rich clusters is limited to delta(y) less than 2 x 10 exp -6 (95 percent confidence level) averaged over the 7 deg DMR beam.

Description: After critically reviewing observational results obtained by astronomical spacecraft in the interplanetary medium for several aspects of galactic cosmic rays (GCRs) and anomalous cosmic rays (ACRs), attention is given to spacecraft data gathered in the magnetosphere and a detailed description is given of the Anuradha cosmic-ray experiment carried by Spacelab-3. The Anuradha results discussed concern the orbit average flux and ionization state of ACRs, the origins of partially ionized galactic cosmic-ray sub-Fe and Fe ions, and the significance of enhanced abundance ratios of sub-Fe and Fe ions in GCRs inside the magnetosphere.

Description: The Indian cosmic ray experiment Anuradha, conducted onboard Spacelab 3 during April 29-May 6, 1985 was designed to obtain information on the ionization states of low-energy cosmic rays, using the geomagnetic field as a rigidity filter to place an upper limit on the ionization state of individual cosmic ray particles. This paper presents data confirming the presence of three distinct groups of energetic particles in the near-earth space: (1) low-energy (15-25 MeV/nucleon) anomalous cosmic rays that are either singly ionized or consistent with their being in singly ionized state, (2) fully ionized galactic cosmic ray ions, and (3) partially ionized iron and sub-iron group ions (which account for about 20 percent of all the iron and sub-iron group ions detected at the Spacelab 3 orbit within the magnetosphere in the energy interval 25-125 MeV/nucleon). It is argued that these partially ionized heavy ions are indeed a part of the low-energy galactic cosmic rays present in the interplanetary space.

Description: Neutron stars, relativistic and compact by nature, show great potential for the copious creation of electron-positron pairs in the magnetospheres; these rapidly cool, thermalize, and then annihilate. It is therefore expected that many neutron sources might display evidence of pair annihilation lines in the 400-500 keV range. It is shown that magnetic photon splitting, which operates effectively at these energies and in the enormous neutron star magnetic fields, can destroy an annihilation feature by absorbing line photons and reprocessing them to lower energies. In so doing, photon splitting creates a soft gamma-ray bump and a broad quasi-power-law contribution to the X-ray continuum, which is too flat to conflict with the observed X-ray paucity in gamma-ray bursts. The destruction of the line occurs in neutron stars with surface fields of 5 x 10 exp 12 G or maybe even less, depending on the size of the emission region.

Description: The Burst and Transient Source Experiment (BATSE) on NASA's Compton Gamma-Ray Observatory has shown that the sources of gamma-ray bursts have an angular distribution consistent with isotropy, yet the bursts are spatially inhomogeneous. Detection of a statistically significant deviation from isotropy in the burst distribution would provide a clue to the distance of the burst sources. BATSE's ability to detect slight deviations of the angular distribution from isotropy is, in part, dependent on the accuracy of the computed burst locations. Using bursts whose locations have been determined accurately and independently, we estimate BATSE's location uncertainties and incorporate them into 3D Monte Carlo simulations of the burst distributions to show that, despite individual burst location uncertainties of about 5 deg, the ability of BATSE to place stringent limits on the anisotropy present in the angular distribution of the gamma-ray bursts is not significantly degraded. Observational effects of possible galactic halo distributions of the burst sources are noted.

Description: Electron transport and acceleration processes in the earth's magnetosphere have correspondences to analogous processes affecting electrons in the solar magnetosphere (i.e., heliosphere). Energetic electrons in planetary magnetospheres and the heliosphere are test particles probing transport and acceleration dynamics with minimal effects on dominant magnetic field configurations. Parallels are discussed relating to electron entry into the magnetospheres from interplanetary and interstellar space, circulatory transport processes, and acceleration by electric fields in boundary regions including shocks and magnetotails.

Description: An instrument designed to measure elemental cosmic ray abundances from boron to nickel in the energy region 0.5-2.0 GeV/nucl was flown on a high altitude balloon from Sioux Falls, South Dakota, on 30 September through 1 October 1976 at an average atmospheric depth of about 5 g/sq cm. Differential energy spectra of B, C, N, O, Ne, Mg, Si and Fe, extrapolated to the top of the atmosphere, were measured. The float altitude exposure of 17 h ended near Alpena, Michigan. The flight trajectory maintained a north easterly heading out of Sioux Falls traversing the upper midwest region between 84 and 97 deg west longitude while remaining between 43.5 and 45 deg north latitude. The maximum vertical cut-off for this flight path was 1.77 GV or 0.35 GeV/nucl.

Description: We present results of a survey of the relation between Forbush decreases, magnetic clouds, and interplanetary shocks during the period August 1978 to November 1982. We have used data from the ISEE-3 study of bidirectional ions associated with magnetic structures or clouds of Marsden et al. (1987), and ground-based observations of Forbush decreases from several neutron monitors. We use the two-step model of a Forbush decrease. We assume that the first step is due to the passage of the postshock turbulent region, and that the second is due to the passage of the magnetic cloud or structure which usually follows the postshock turbulent region. To determine the effectiveness of the postshock turbulent region in causing a Forbush decrease, we have evaluated the radial diffusion coefficient of the postshock turbulent region for the eight largest events during the above period using observations of the magnetic field. We have made a quantitative assessment of the relative importance of the postshock turbulent region in the formation of the Forbush decrease, concluding that the postshock turbulent region alone is not sufficient to cause a Forbush decrease.

Description: The sensitivity of cross correlation and maximum likelihood, two methods under consideration by the EGRET team for detecting point sources, is analyzed numerically. Cross correlation is found to be 9 +/- 2 percent more sensitive than maximum likelihood.

Description: The hardness and intensity are easily measured quantities for all gamma-ray bursts (GRBs), and so, many past and current studies have sought correlations between them. This Letter presents many serious methodological problems with the practical definitions for both hardness and intensity. These difficulties are such that significant correlations can be easily introduced as artifacts of the reduction procedure. In particular, cosmological models of GRBs cannot be tested with hardness/intensity correlations with current instrumentation and the time evolution of the hardness in a given burst may be correlated with intensity for reasons that are unrelated to intrinsic change in the spectral shape.

Description: A revised limit on the local X-ray emissivity due to sources correlated with nearby galaxies is obtained. These results are extrapolated up to a redshift of about 5, and it is found that a smaller, but still significant, fraction of the X-ray background (30 +/- 15 percent) can be accounted for by these sources. Evolution of the source properties and/or a new population of sources at high redshift is required to explain the residual background emissions.

Description: We describe an updated predictive engineering model for the interplanetary fluence of protons with energies respectively greater than 1, 4, 10, 30, and 60 MeV. This has been the first opportunity to derive a model from a data set that has been collected in space over a long enough period of time to produce a valid sample of solar proton events. The model provides a quantitative basis for estimating the exposures to solar protons of spacecraft during missions of varying length and of surfaces and atmospheres of solar system objects. The data sets contain several major proton events comparable to the 1972 event. For the cases of the over 10 and over 30 MeV particles, the fluences are somewhat lower than in our earlier model No over 1, over 4, and over 60 MeV proton fluence models have been published in the literature previously. We present our results in a convenient graphical form which may be used to calculate the 1 AU fluence expected at a given confidence level as a function of the length of the exposure. A method of extending this estimate to other heliocentric distances is described.

Description: We have studied the duration distribution of the gamma-ray bursts of the first BATSE catalog. We find a bimodality in the distribution, which separates GRBs into two classes: short events (less than 2 s) and longer ones (more than 2 s). Both sets are distributed isotropically and inhomogeneously in the sky. We find that their durations are anticorrelated with their spectral hardness ratios: short GRBs are predominantly harder, and longer ones tend to be softer. Our results provide a first GRB classification scheme based on a combination of the GRB temporal and spectral properties.

Description: Three short very soft gamma-ray (SGR) transient events from a location consistent with that of the SGR 1900 + 14, first described by Mazets et al. (1979), were detected by the Burst and Transient Source Experiment. The results of observations of the temporal and spectral properties of the SGR 1900 + 14 suggest that the SGR phase lasts at least 13 years, lending support to the suggestion by Kouveliotou et al. (1987) and Fishman et al. (1989) that SGRs are related to galactic (possibly population I) objects, perhaps neutron stars.

Description: Information on the cosmic rays in the Large and Small Magellanic Clouds may be obtained from measurements of the synchrotron radiation related to the energetic electrons, which are believed to contain only about 1 percent of the cosmic rays energy. Assuming the same ratio as in our Galaxy between the cosmic ray electrons and nucleons, the energy density distribution may be estimated. This prediction is compared to that deduced from the matter density distribution, the concept of dynamic balance, and an appropriate coupling scale. For the LMC, the condition of quasi-equilibrium seems satisfied as is required for dynamic balance to be a valid concept, but for the SMC, this seems not to be the case.

Description: Using the results of the IRAS far-infrared survey of the Galaxy, we have obtained the large-scale radial distributions of Galactic far infrared emission independently for both the Northern and Southern Hemisphere sides of the Galaxy. We find the dominant feature in these distributions to be a broad peak coincident with the '5 kpc' molecular gas cloud ring. We also find evidence of spiral arm features. Strong correlations are evident between the large scale Galactic distributions of far infrared emission, gamma-ray emission and CO emission. We find a particularly tight correlation between the distribution of warm molecular clouds and far-infrared emission on a Galactic scale.

Description: During October 1989, three very energetic flares were ejected by the same active region at longitudes 9 deg E, 32 deg W, and 57 deg W, respectively. The shape of the galactic cosmic ray variations suggests the presence of large magnetic cloud structures (Nagashima et al., 1990) following the shock-associated perturbations. In spite of long data gaps the interplanetary observations at Interplanetary Monitoring Platform (IMP) 8 (near the Earth) and International Cometary Explorer (ICE)(approximately 1 AU, approximately 65 deg W) confirm this possibility for the event related to the 9 deg E flare; the principal axes analysis shows that the interplanetary magnetic field variations at both spacecraft locations are mainly confined on a meridian plane. This result suggests that the western longitudinal extension of this cloud is indeed very large (greater than or equal to 5 deg). The nonnegligible depression in the cosmic ray intensity observed inside the possible cloud related to the 57 deg W flare indicates that also the eastern extension could be very wide. The analysis of neutron monitor data shows clearly the cosmic ray trapping effect of magnetic clouds; this mechanism seems to be responsible for the enhanced diurnal effect often observed during the recovery phase of Forbush decreases. We give an interpretation for the anisotropic cosmic ray peak occurring in the third event, and, related to that, we suggest that the Forbush decrease modulated region at the Earth's orbit could be somewhat wider than the magnetic cloud, as already anticipated by Nagashima et al. (1990). By this analysis, based mainly on cosmic ray data, we show that it is possible to do reasonable inferences on the large-scale structure of flare-related interplanetary perturbations when interplanetary medium data are not completely present.

Description: We have used the data from the new EGRET catalog on 'grazars' (blazers which are observed to be high-energy gamma-ray sources), together with radio data, to construct a new relation between radio and gamma-ray luminosity for these sources. Using this relation to construct a grazar gamma-ray luminosity function, we then calculate the contribution of unresolved grazars to the cosmic gamma-ray background radiation. We derive the energy spectrum of this background component above 100 MeV and the angular fluctuations in this background implied by our model.

Description: We show that gamma-ray line emission at approximately 0.4 and less than or approximately 0.2 MeV can be produced by Compton scattering of beamed radiation in the jets of Galactic black hole candidates. This mechanism has the novel feature of not invoking the presence of e(exp +)-e(exp -) pairs. To produce the two lines, we employ a symmetric double-sided jet with bulk flow velocity of about 0.5c and incident beam radiation with a hard energy spectrum. We show that the two lines can be seen at viewing-angle cosines relative to the jet ranging from 0.2 to 0.6. This comprises 40% of the total solid angle. In addition, the line radiation is approximately 10% polarized. Depending on the bulk flow and viewing angle, the model can produce lines at other energies as well. In particular, a broad feature near 1 MeV can be seen by viewing the jet close to its axis. Our model can also accommodate single-line spectra if the beamed gamma-ray emission or the jets themselves are asymmetric.

Description: The gamma-ray spectrum of 3C 279 during 1991 June exhibited a near-perfect power law between 50 MeV and over 5 GeV with a differential spectral index of -(2.02 +/- 0.07). If extrapolated, the gamma-ray spectrum of 3C 279 should be easily detectable with first-generation air Cerenkov detectors operating above about 0.3 TeV provided there is no intergalactic absorption. However, by using model-dependent lower and upper limits for the extragalactic infrared background radiation field, a sharp cutoff of the 3C 279 spectrum is predicted at between about 0.1 and about 1 TeV. The sensitivity of present air Cerenkov detectors is good enough to measure such a cutoff, which would provide the first opportunity to obtain a measurement of the extragalactic background infrared radiation field.

Description: The parallel mean free path and the diffusion coefficient parallel to the magnetic field line are derived from magnetic field data at 20 AU to characterize heliospheric modulation and energetic-particle/magnetic-field interaction. The computational method of Moussas et al. (1975, 1982) is employed, and the values of the parallel mean free path are shown to be significantly larger than the values estimated in studies of up to 6 AU. The distance dependence of the parallel diffusion mean free path is found to follow a power law, and the diffusion coefficient dependence upon energy is determined by a constant mean free path and the velocity of the particle. The contribution of the diffusion coefficient perpendicular to the magnetic field is expected to dominate the radial diffusion coefficient of cosmic rays, although the contribution of the diffusion parallel to the field is important with respect to the small-scale structure of intensity gradients.

Description: The solar particle events of August through December 1989, among the largest ever recorded, are analyzed to assess the potential hazards to humans on interplanetary missions from events of these types. Using the coupled neutron-proton space radiation transport computer code BRYNTRN, risk estimates for the effects of exposures to the skin, ocular lens, and bone marrow are made for nominal thicknesses of the spacecraft aluminum shielding. Risk assessment in terms of absorbed dose is made for each event. Also presented are estimates of organ absorbed dose and dose equivalent for pairs of events which occurred within 30-day periods, and for the cumulative August through December 1989 period.

Description: A Monte Carlo simulation shows that the EGRET gamma-ray telescope aboard the GRO satellite does not have sufficient sensitivity to detect linear polarization, even for 100-percent polarized gamma-ray sources. This is confirmed by analysis of calibration data. Several data selection techniques suggested to enhance polarization sensitivity have been evaluated and found to not significantly improve sensitivity.

Description: Cosmic ray observations at 1 AU are compared for the last three solar minimum periods along with the 1977/1989 and 1987 Pioneer 10 and Voyager 1 and 2 data from the outer heliosphere. There is good agreement between the 1965 and 1987 Galactic cosmic ray H and He spectra at 1 AU. Significant and complex differences are found between the 1977/1978 and 1987 measurements of the Galactic and anomalous cosmic ray components at 1 and 15 AU. In the outer heliosphere there are negative latitudinal gradients that reach their maximum magnitude when the inclination of the outer heliosphere current sheet is at a minimum. The radial gradients decrease with heliocentric distance as about 1/r exp 0.7 and do not differ significantly at the successive solar minima. The measured radial and latitudinal gradients are used to estimate the particle transport parameters in the outer heliosphere. Using the local interstellar He spectrum of Webber et al. (1987), it is estimated that the modulation boundary is of the order of 160 AU.

Description: The Northern Hemisphere data from the 19.2 GHz full sky survey are analyzed to place limits on the magnitude of Gaussian fluctuations in the cosmic microwave background implied by a variety of correlation functions. Included among the models tested are the monochromatic and Gaussian-shaped families, and those with power law spectra for n from -2 to 1. We place an upper bound on the quadrupole anisotropy of DeltaT/T less than 3.2 x 10 exp -5 rms, and an upper bound on scale-invariant (n = 1) fluctuations of a2 less than 4.5 x 10 exp -5 (95 percent confidence level). There is significant contamination of these data from Galactic emission, and improvement of our modeling of the Galaxy could yield a significant reduction of these upper bounds.

Description: Present and future measurement of the Large Magellanic Cloud (LMC) particularly in the radio and high energy gamma ray range offer the possibility of understanding the density and distribution of the cosmic rays in a galaxy other than our own and the role that they play in galactic dynamic balance. After a study of the consistency of the measurements and interpretation of the synchrotron radiation from our own galaxy, the cosmic ray distribution for the LMC is calculated under the assumption that the cosmic ray nucleon to electron ratio is the same and the relation to the magnetic fields are the same, although the implications of alternatives are discussed. It is seen that the cosmic ray density level appears to be similar to that in our own galaxy, but varying in position in a manner generally consistent with the concept of correlation with the matter on a broad scale.

Description: It is argued that the local gravitational dipole implied by the 50 brightest X-ray clusters of galaxies at z greater than 0.013 considered by Lahav et al. (1989) is relatively small compared with that inferred from the only three clusters at lower redshifts. Recent dipole analysis of the X-ray flux from bright AGN observed with HEAO-1A2 indicates that they are indeed strong tracers of this matter. The implications of this for the very pronounced large-scale foreground anisotropies to be measured via low-redshift AGN resolved in more sensitive all-sky surveys are explored. For the total extragalactic X-ray sky, i.e., including the relatively large Cosmic X-ray Background as well as the contribution of the resolved sources, the dipole moment is small compared to the monopole. Because of the large peculiar velocity of the Local Group, it is found that the currently estimated value for this total dipole moment can be used to set severe constraints on the volume emissivity arising from all X-ray sources within the present epoch.

Description: Apollo 12 solar wind spectrometer and particle energy spectra at lunar surface

Description: The X-33 Advanced Technology Demonstrator is an un-piloted, vertical take-off, horizontal landing spacecraft. The purpose of the X-33 program is to demonstrate technologies that will dramatically lower the cost of access to space. The rocket-powered X-33 will reach an altitude of up to 100 km and speeds between Mach 13 and 15. Fifteen flight tests are planned, beginning in 2000. Some of the key technologies demonstrated will be the linear aerospike engine, improved thermal protection systems, composite fuel tanks and reduced operational timelines. The X-33 vehicle umbilical connections provide monitoring, power, cooling, purge, and fueling capability during horizontal processing and vertical launch operations. Two "rise-off" umbilicals for the X-33 have been developed, tested, and installed. The X-33 umbilical systems mechanisms incorporate several unique design features to simplify horizontal operations and provide reliable disconnect during launch.

Description: The Clouds and the Earth's Radiant Energy System (CERES) elevation scan bearings lubricated with Pennzane SHF X2000 and 2% lead naphthenate (PbNp) were life tested for a seven-year equivalent Low Earth Orbit (LEO) operation. The bearing life assembly was tested continuously at an accelerated and normal rate using the scanning patterns developed for the CERES Earth Observing System AM-1 mission. A post-life-test analysis was performed on the collected data, bearing wear, and lubricant behavior.

Description: This laboratory experiment is intended for students in an introductory polymer materials and processes course or engineering materials course. It can be conducted as an introduction to the hand lay-up process, with additional observations regarding the stiffness of the completed composite beams based on core thickness and fiber orientation. Students gain hands-on experience with the hand lay-up process by constructing glass/epoxy composite panels. Each lab group produces a panel with different core thickness or fiber orientation. The panels are then cut into strips and tested for flexural stiffness in a three-point bending fixture. Students plot deflection versus load data for composite beams with two different fiber orientations, two core thicknesses and one beam with laminate plies only (no core). The deflection plots highlight the effects of core thickness and fiber orientation on composite beam stiffness.

Description: Conventional spin axis ball bearings have been unreliable in spacecraft, often failing by two heretofore uncontrolled processes: ball retainer instability and lubricant breakdown. The Space Cartridge Bearing System (SCBS) addresses each of these mechanisms directly, leading to a bearing system with absolute freedom from retainer instability and negligible lubricant degradation rate. The result is a reliable plug-in bearing cartridge with a definite design life.

Description: The focus of this paper is a comparison of ground-based solar array deployment tests with the on-orbit deployment. The discussion includes a summary of the mechanisms involved and the correlation of a dynamics model with ground based test results. Some of the unique characteristics of the mechanisms are explained through the analysis of force and angle data acquired from the test deployments. The correlated dynamics model is then used to predict the performance of the system in its flight application.

Description: Common Berthing Mechanism (CBM) provides the structural interface between separate International Space Station (ISS) elements, such as the Laboratory and Node modules. The CBM consists of an active and a passive half that join together with structural bolts. The seal at this interface is the CBM-to-CBM molded seal. The CBM-to-CBM interface is assembled on orbit, thus the seals can be exposed to the space environment for up to 65 hours. Atomic Oxygen/Vacuum Ultraviolet radiation (AO/VUV) in space is a potential hazard to the seals. Testing was conducted to determine the effect on leakage of the CBM-to-CBM seal material exposed to AO/VUV. The sealing materials were S383 silicone and V835 fluorocarbon material. Control samples, which were not exposed to the AO/VUV environment, were used to ensure that if any changes in leakage occurred, they could be attributed to the AO/VUV exposure. After exposure to the AO/VUV environment the leakage increase was dramatic for the fluorocarbon. This testing was a major contributing factor in selecting silicone as the CBM-to-CBM seal material.

Description: This paper highlights bulk flow and CFD-based models prepared to calculate force and leakage properties for seals and shrouded impeller leakage paths. The bulk flow approach uses a Hir's based friction model and the CFD approach solves the Navier Stoke's (NS) equation with a finite whirl orbit or via analytical perturbation. The results show good agreement in most instances with available benchmarks.

Description: The Cassini mission requires extraordinary life and reliability from the linear servo-actuators which position the spacecraft's redundant rocket engines. Both commercial actuators and existing in-house actuator designs were studied for this application. Ultimately a device inherited from JPL's Mariner and Viking missions to Mars was selected because of its close match to functional requirements and its flight pedigree. However, several design improvements were necessary to meet life and reliability goals. Special attention was focused on reliability testing of the motor and mechanism at all stages of procurement and assembly because a brush type of DC motor was retained from the old design. These improvements and, in particular, efforts to develop new component sources are discussed in this paper.

Description: The Goddard Space Flight Center has developed the Robot Operated Materials Processing System (ROMPS) that flew aboard STS-64 in September, 1994. The ROMPS robot transported pallets containing wafers of different materials from their storage racks to a furnace for thermal processing. A system of tapered guides and compliant springs was designed to deal with the potential misalignments. The robot and all the sample pallets were locked down for launch and landing. The design of the passive lockdown system, and the interplay between it and the alignment system are presented.

Description: This paper describes the efforts to redesign, fabricate, assemble and test the wrist actuators on the Automated Tile Processing System (ATPS). The ATPS is a robotic system being developed at Kennedy Space Center to inspect and rewaterproof thermal protection tiles on the space shuttle orbiter prior to launch. The objective of the redesign was to eliminate backlash and provide adequate pitch and yaw actuator force. The wrist actuators have been successfully redesigned, fabricated, tested, and installed. The redesigned wrist actuators meet or exceed all design requirements. The wrist has been reinstalled on the tile processing robot and will be further evaluated during operational testing of the system.

Description: This paper investigates the steady-state responses of a rotor system supported by auxiliary bearings in which there is a clearance between the rotor and the inner race of the bearing. A simulation model based upon the rotor of a production jet engine is developed and its steady-state behavior is explored over a wide range of operating conditions for various parametric configurations. Specifically, the influence of rotor imbalance, clearance, support stiffness and damping is studied. Bifurcation diagrams are used as a tool to examine the dynamic behavior of this system as a function of the afore mentioned parameters. The harmonic balance method is also employed for synchronous response cases. The observed dynamical responses is discussed and some insights into the behavior of such systems are presented.

Description: This paper highlights the accomplishments on a joint effort between NASA - Marshall Space Flight Center and Texas A and M University to develop accurate seal analysis software for use in rocket turbopump design, design audits and trouble shooting. Results for arbitrary clearance profile, transient simulation, thermal effects solution and flexible seal wall model are presented. A new solution for eccentric seals based on cubic spline interpolation and ordinary differential equation integration is also presented.

Description: A computational simulation of reacting 2-D and 3-D flowfields in a model inlet section of a Pre-Mixed, Shock-Induced Combustion (PM/SIC) engine concept was performed. LARCK, a multi-dimensional Navier-Stokes code with finite-rate kinetics chemistry developed at NASA LaRC by J.A. White, was adapted for this simulation. The flow conditions in the simulation match those envisioned for the PM/SIC engine experiments currently planned at LaRC. The reacting flowfields were Mach 6.3 freestream air and Mach 2 hydrogen at various pressure and temperature conditions injected through a slot injector at the base of the inlet section. In the PM/SIC engine, fuel is injected at the inlet section upstream of the combustor, and reaction is initiated by the shock wave at the inlet which increases the gas temperature and pressure beyond the kinetic limits for reaction. Many challenges exist prior to establishing shock-controlled combustion as a practical engine concept. These challenges include fuel injection schemes that can provide proper fuel-air mixing without creating large losses in the inlet section, and control of the combustion process so that early ignition or combustion propagation through the inlet boundary layer does not occur. For this project, a parametrics study was carried out to model the fuel injection of hydrogen at different flow conditions. It was found that, as the fuel temperature and pressure were increased, the potential for pre-ignition was high at a short distance downstream of the slot injector. The next stage of this work will investigate injection techniques for enhancing mixing of fuel and air in a manner that prevents or reduces the potential for premature ignition observed numerically.

Description: High energy electromagnetic radiation and energetic particles from sun, galaxies, and nuclear explosions in spacecraft environment

Description: Solar radiation, albedo, and thermal radiation environment of earth and moon orbiting satellites

Description: Hydromagnetic tangential discontinuities in solar wind from Pioneer 6

Description: Carbon 12 to carbon 13 ratio in Zeta Ophivchi and exchange with interstellar matter

Description: Isotropic 1-100 Mev gamma radiation and cosmic ray detection of cosmological significance

Description: High energy solar flare X rays

Description: Diffusion of charged particles in magnetosphere

Description: Positron annihilation in helium

Description: Visual aurora produced by energetic electrons

Description: Particle acceleration mechanisms in magnetosphere and on sun

Description: Physical properties, origin, and evolution of interplanetary dust particles

Description: Random processes in Brownian motion for solving relativistic Fokker-Planck equation

Description: Production and propagation of cosmic ray photons

Description: Detector and spark chamber systems for gamma ray astronomy in first-generation experiments

Description: Spectral measurement from detectors for true 0.1 to 10 Mev gamma ray data

Description: Solar wind interaction with lunar far side and near side surface, and lunar magnetic fields from Explorer 35 data

Description: Cosmic ray effects on plasma physics of galaxy

Description: Source, composition, and propagation of nuclear components of cosmic rays

Description: High energy astrophysics of cosmic radiation and galaxies

Description: Hybrid ceramic rolling element bearings are being tested in liquid hydrogen at Marshall Space Flight Center. The testing will evaluate their long term durability for use at high speeds in cryogenic rocket engine turbomachinery. The use of hybrid ceramic bearings in liquid hydrogen follows successful development and flight in liquid oxygen turbopumps.

Description: Development of the Open Path Tunable Infrared Monitor of the Atmosphere (OPTIMA) instrument involved designing a pair of motion systems that could maintain a precise alignment and spatial distance between two mirrors installed on the NASA DC-8 research laboratory aircraft. This is the first airborne optical instrument that allows direct measurement of the gases in the freestream airflow on the exterior of the aircraft. One mirror is mounted within a specially constructed open port cavity in the cabin of the aircraft and the second is mounted 6 meters away on top of the inboard port side (number 2) engine pylon. Three co-aligned laser beams are reflected between the two mirrors 64 times in a Herriott pattern. The resulting sample path length of 384 meters is used to perform a spectral absorption analysis of the airflow between the mirrors. To compensate for normal wing movement and engine oscillations both mirrors were designed as continuously driven mechanisms to maintain alignment within allowable limits. The motion systems of the two mirror assemblies provide five degrees of freedom and are designed to maintain a pointing accuracy within seven arc-sec with a response frequency in excess of 10 Hz. The pylon motion system incorporates controlled pitch and yaw movement. The fuselage motion system compensates for pitch variation as well as linear translation for focal length and vertical aiming of the laser beam via a controlled beam guidance mechanism.

Description: Auxiliary bearings are a critical feature of any magnetic bearing system. They protect the soft iron core of the magnetic bearing during an overload or failure. An auxiliary bearing typically consists of a rolling element bearing or bushing with a clearance gap between the rotor and the inner race of the support. The dynamics of such systems can be quite complex. It is desired to develop a rotordynamic model which describes the dynamic behavior of a flexible rotor system with magnetic bearings including auxiliary bearings. The model is based upon an experimental test facility. Some simulation studies are presented to illustrate the behavior of the model. In particular, the effects of introducing sideloading from the magnetic bearing when one coil fails is studied. These results are presented and discussed.