ALBERT

Description: East Asia is the most complex region in the world for aerosol studies, as it encounters a lot of varieties of aerosols, and aerosol classification can be a challenge in this region. In the present study, we focused on the relationship between aerosol types and aerosol optical properties. We analyzed the long-term (2005–2012) data of vertical profiles of aerosol extinction coefficients, lidar ratio (Sp), and other aerosol optical properties obtained from a NASA Micro-Pulse Lidar Network and Aerosol Robotic Network site in northern Taiwan, which frequently receives Asian continental outflows. Based on aerosol extinction vertical profiles, the profiles were classified into two types: type 1 (single-layer structure) and type 2 (two-layer structure). Fall season (October–November) was the prevailing season for the Type 1, whereas type 2 mainly happened in spring (March–April). In type 1, air masses normally originated from three regional sectors, i.e., Asia continental (AC), Pacific Ocean (PO), and Southeast Asia (SA). The mean Sp values were 39 ± 17 sr, 30 ± 12 sr, and 38 ± 18 sr for the AC, PO, and SA sectors, respectively. The Sp results suggested that aerosols from the AC sector contained dust and anthropogenic particles, and aerosols from the PO sector were most likely sea salts. We further combined the EPA dust event database and backward trajectory analysis for type 2. Results showed that Sp was 41 ± 14 sr and 53 ± 21 sr for dust storm and biomass-burning events, respectively. The Sp for biomass-burning events in type 2 showed two peaks patterns. The first peak occurred within range of 30–50 sr corresponding to urban pollutant, and the second peak occurred within range of 60–80 sr in relation to biomass burning. Finally, our study summarized the Sp values for four major aerosol types over northern Taiwan, viz., urban (42 ± 18 sr), dust (34 ± 6 sr), biomass-burning (69 ± 12 sr), and oceanic (30 ± 12 sr). Our findings provide useful references for aerosol classification and air pollution identification over the western North Pacific.

Description: Urbanization is a complex process closely involving the economy, society, and population. While monitoring urban development and exploring the industry-driving force in a real-time and effective way are the prerequisites for optimizing industry structure, narrowing the urban development gap, and achieving sustainable development. Nighttime light is an effective tool to monitor urban development from a macro perspective. However, the systematic research of nighttime light spatiotemporal variation modes and the industry-driving force of urban nighttime light are still unknown. Considering these issues, this paper analyzes the spatiotemporal variation modes of the average light index (ALI) and investigates the industry-driving force of ALI in 100 major prefecture-level cities across China mainland based on National Polar-Orbiting Partnership Satellite Visible Infrared Imaging Radiometer Suite (NPP VIIRS). The conclusions are as following three aspects. First, ALI is observed a funnel pattern among four regions in spatial dimension, with low in center and high in the surrounding, and it shows 5 variation modes (“W,” “√,” “Exponent,” “Logarithm,” and “N”) in temporal dimension, of which the “√” mode accounts for the highest proportion (60%). Second, the industry structure is closely related to ALI. Besides, the factor analysis result illustrates that the secondary and tertiary industry are the driving industries of ALI. Third, the classification result based on the industry contribution rate indicates that cities driven by different industries show significant spatial distribution differences. The three major industry-driving cities are mainly distributed in central and western regions, the secondary and tertiary industry-driving cities are evenly distributed, and the tertiary industry-driving cities are mainly distributed in provincial capitals. From 2013 to 2018, the fluctuation of city distribution driven by different industries changes obviously. The number of tertiary industry-driving cities increases steadily and the three major industry-driving cities are distributed wider spatially. Additionally, the impacts of location and raw coal on ALI are discussed. In general, these findings are essential to further research urban development mode and can be considered as the reference to narrow urban development gap.

Description: A low-mass and low-volume dual-polarization L-band radiometer is introduced that has applications for ground-based remote sensing or unmanned aerial vehicle (UAV)-based mapping. With prominent use aboard the ESA Soil Moisture and Ocean Salinity (SMOS) and NASA Soil Moisture Active Passive (SMAP) satellites, L-band radiometry can be used to retrieve environmental parameters, including soil moisture, sea surface salinity, snow liquid water content, snow density, vegetation optical depth, etc. The design and testing of the air-gapped patch array antenna is introduced and is shown to provide a 3-dB full power beamwidth of 37°. We present the radio-frequency (RF) front end design, which uses direct detection architecture and a square-law power detector. Calibration is performed using two internal references, including a matched resistive source (RS) at ambient temperature and an active cold source (ACS). The radio-frequency (RF) front end does not require temperature stabilization, due to characterization of the ACS noise temperature by sky measurements. The ACS characterization procedure is presented. The noise equivalent delta (Δ) temperature (NEΔT) of the radiometer is ~0.14 K at 1 s integration time. The total antenna temperature uncertainty ranges from 0.6 to 1.5 K.

Description: Avalanche disasters are extremely destructive and catastrophic, often causing serious casualties, economic losses and surface erosion. However, far too little attention has been paid to utilizing remote sensing mapping avalanches quickly and automatically to mitigate calamity. Such endeavors are limited by formidable natural conditions, human subjective judgement and insufficient understanding of avalanches, so they have been incomplete and inaccurate. This paper presents an objective and widely serviceable method for regional auto-detection using the scattering and interference characteristics of avalanches extracted from Sentinel-1 SLC images. Six indices are established to distinguish avalanches from surrounding undisturbed snow. The active avalanche belts in Kizilkeya and Aktep of the Western TianShan Mountains in China lend urgency to this research. Implementation found that smaller avalanches can be consistently identified more accurately in descending images. Specifically, 281 and 311 avalanches were detected in the ascending and descending of Kizilkeya, respectively. The corresponding numbers on Aktep are 104 and 114, respectively. The resolution area of single avalanche detection can reach 0.09 km2. The performance of the model was excellent in all cases (areas under the curve are 0.831 and 0.940 in descending and ascending of Kizilkeya, respectively; and 0.807 and 0.938 of Aktep, respectively). Overall, the evaluation of statistical indices are POD 〉 0.75, FAR 〈 0.34, FOM 〈 0.13 and TSS 〉 0.75. The results indicate that the performance of the innovation proposed in this paper, which employs multivariate comprehensive descriptions of avalanche characteristics to actualize regional automatic detection, can be more objective, accurate, applicable and robust to a certain extent. The latest and more complete avalanche inventory generated by this design can effectively assist in addressing the increasingly severe avalanche disasters and improving public awareness of avalanches in alpine areas.

Description: An extremely heavy rainfall event hit Guangdong province, China, from 27 August to 1 September 2018. There were two different extreme rain regions, respectively, at the Pearl River estuary and eastern Guangdong, and a record-breaking daily precipitation of 1056.7 mm was observed at Gaotan station on 30 August. This paper utilizes a suite of observations from soundings, a gauge network, disdrometers, and polarimetric radars to gain insights to the two rainfall centers. The large-scale meteorological forcing, rainfall patterns, and microphysical processes, as well as radar-based precipitation signatures are investigated. It is concluded that a west-moving monsoon depression played a critical role in sustaining the moisture supply to the two extreme rain regions, and the combined orographic enhancement further contributed to the torrential rainfall over Gaotan station. The raindrop size distributions (DSD) observed at Zhuhai and Huidong stations, as well as the observed polarimetric radar signatures indicate that the rainfall at Doumen region was characterized by larger raindrops but a lower number concentration compared with that at Gaotan region. In addition, the dual-polarization radars are used to quantify precipitation intensity during this extreme event, providing timely information for flood warning and emergency management decision-making.

Description: Earth remote sensing optical satellite systems are often divided into two categories—geosynchronous and sun-synchronous. Geosynchronous systems essentially rotate with the Earth and continuously observe the same region of the Earth. Sun-synchronous systems are generally in a polar orbit and view differing regions of the Earth at the same local time. Although similar in instrument design, there are enough differences in these two types of missions that often the calibration of the instruments can be substantially different. Thus, respective calibration teams develop independent methods and do not interact regularly or often. Yet, there are numerous areas of overlap and much to learn from one another. To address this issue, a panel of experts from both types of systems was convened to discover common areas of concern, areas where improvements can be made, and recommendations for the future. As a result of the panelist’s efforts, a set of eight recommendations were developed. Those that are related to improvements of current technologies include maintaining sun-synchronous orbits (not allowing orbital decay), standardization of spectral bandpasses, and expanded use of well-developed calibration techniques such as deep convective clouds, pseudo invariant calibration sites, and lunar methodologies. New techniques for expanded calibration capability include using geosynchronous instruments as transfer radiometers, continued development of ground-based prelaunch calibration technologies, expansion of RadCalNet, and development of space-based calibration radiometer systems.

Description: As satellite observation technology improves, the number of remote sensing images significantly and rapidly increases. Therefore, a growing number of studies are focusing on remote sensing image retrieval. However, having a large number of remote sensing images considerably slows the retrieval time and takes up a great deal of memory space. The hash method is being increasingly used for rapid image retrieval because of its remarkably fast performance. At the same time, selecting samples that contain more information and greater stability to train the network has gradually become the key to improving retrieval performance. Given the above considerations, we propose a deep hash remote sensing image retrieval method, called the hard probability sampling hash retrieval method (HPSH), which combines hash code learning with hard probability sampling in a deep network. Specifically, we used a probability sampling method to select training samples, and we designed one novel hash loss function to better train the network parameters and reduce the hashing accuracy loss due to quantization. Our experimental results demonstrate that HPSH could yield an excellent representation compared with other state-of-the-art hash approaches. For the university of California, merced (UCMD) dataset, HPSH+S resulted in a mean average precision (mAP) of up to 90.9% on 16 hash bits, 92.2% on 24 hash bits, and 92.8% on 32 hash bits. For the aerial image dataset (AID), HPSH+S achieved a mAP of up to 89.8% on 16 hash bits, 93.6% on 24 hash bits, and 95.5% on 32 hash bits. For the UCMD dataset, with the use of data augmentation, our proposed approach achieved a mAP of up to 99.6% on 32 hash bits and 99.7% on 64 hash bits.

Description: Access and use of seed of improved varieties of groundnut among farmers can improve farmers’ livelihoods and contribute to the potential of crop production in Tanzania. This paper analyzes factors underpinning the adoption of improved groundnut varieties among farmers to pave the way for upscaling quality seed used for increased production and commodity business in farming communities. A four-stage stratified sampling was used to collect data from 300 groundnut farmers in seven agro-ecological zones through individual interviews. Secondary data were collected from the literature and the Tanzania Agricultural Research Institute at Naliendele centre (TARI–Naliendele). Descriptive statistics and Probit regression model were used for data analysis. The empirical results showed that Johari 1985, Pendo 1998, Naliendele 2009, Mnanje 2009, Mangaka 2009 and Nachi 2015, are the main six improved groundnut varieties used by farmers, with Pendo 1998 having the highest adoption rate (17.1%). In the grain market, four varieties, namely Pendo 1998, Mnanje 2009, Nachi 2015 and Johari 1985, were observed to be highly preferred by grain off-takers. Furthermore, among the adopted improved varieties, Nachi 2015, is observed to be the most consistent high yielding variety, ranging from 1100 kg/ha to 1500 kg/ha in all agro-ecological zones. A farmer’s decision to adopt new varieties is affected by age and gender, farmer group membership, availability of improved seed and seed cost. Overall, male farmers are more likely to adopt improved varieties of groundnut than female farmers. The implications of these findings are also discussed, in particular in the area of policy support.

Description: Green bonds are similar to conventional bonds but are specifically earmarked to raise money to finance climate or environmental projects. There have been anecdotes of green bonds being priced tighter than similar conventional bonds by the same issuers. Our survey of academic literature indicates that most papers show the yield of a green bond is lower than that of the equivalent conventional bond at issuance (also known as green premium or greenium). However, green bond pricing studies by Climate Bonds Initiative produce mixed results. The conflicting results are likely explained by differences in sample selections, time periods, methodologies, and the properties of the respective issuing entity and the bond. In addition, we examine investment returns from select green bond funds and green bond indexes. The assets under management of those funds are still small and they underperform their benchmark indexes.

Description: Sugarcane is an important industrial crop because it is the major source of white sugar. It is also one of the crops for the alcohol and biofuel industries. Disease-causing organisms can significantly decrease the productivity of sugarcane plants and sugar quality. Among the disease-causing organisms, Colletotrichum falcatum Went causes the most significant economic loss (5–50%) in the sugarcane production due to red rot disease. This loss results in only 31% sugar recovery. It is reported that C. falcatum can kill sugarcane plants. Currently, there is no sustainable way of preventing red rot disease from spreading in sugarcane plantations. Many popular sugarcane varieties are no longer used in sugarcane cultivation because of their susceptibility to C. falcatum. The objectives of this manuscript were to: (i) summarize existing approaches for the early detection of red rot disease and controlling techniques of red rot disease in the field and laboratory and (ii) assess red rot disease control effectiveness so as to propose better methods for mitigating the spread C. falcatum. If our proposition is adopted or practiced, it could significantly contribute to the mitigation of C. falcatum infection in the sugarcane industry. This could enable achieving sustainable cultivation of sugarcanes to guarantee the sustainability of the sugar industry in the tropics and the subtropics.

Description: The transition from intensive conventional agriculture to sustainable agriculture has become a global priority. This is due to the need for environmentally friendly agriculture to ensure sufficient food for a rapidly growing population. The bioeconomy is essential to progress in the field of sustainable agriculture. It contributes to the conservation of biological resources through circular and comprehensive management. The bioeconomy prioritizes the reduction and reuse of materials and products. The focus of this study is the use of biodegradable/compostable raffia in protected horticultural crops in the Province of Almería (Spain). The analysis and evaluations, based on an extensive literature review and information given by stakeholders, determined that biodegradable raffia use significantly improves the management of residual biomass in Almería. However, biodegradable raffia is only used in a small percentage of crops even though it is a sustainable alternative and profitable for farmers. The economic analysis incorporates the higher cost of recycling non-biodegradable raffia.

Description: Sustainable agricultural production is endangered by several ecological factors, such as drought, extreme temperatures, excessive salts, parasitic ailments, and insect pest infestation. These challenging environmental factors may have adverse effects on future agriculture production in many countries. In modern agriculture, conventional crop-breeding techniques alone are inadequate for achieving the increasing population’s food demand on a sustainable basis. The advancement of molecular genetics and related technologies are promising tools for the selection of new crop species. Gene pyramiding through marker-assisted selection (MAS) and other techniques have accelerated the development of durable resistant/tolerant lines with high accuracy in the shortest period of time for agricultural sustainability. Gene stacking has not been fully utilized for biotic stress resistance development and quality improvement in most of the major cultivated crops. This review emphasizes on gene pyramiding techniques that are being successfully deployed in modern agriculture for improving crop tolerance to biotic and abiotic stresses for sustainable crop improvement.

Description: Upwelling and downwelling processes play a critical role in the connectivity between offshore waters and coastal ecosystems, having relevant implications in terms of intense biogeochemical activity and global fisheries production. A variety of in situ and remote-sensing networks were used in concert with the Iberia–Biscay–Ireland (IBI) circulation forecast system, in order to investigate two persistent upwelling and downwelling events that occurred in the Northwestern (NW) Iberian coastal system during summer 2014. Special emphasis was placed on quality-controlled surface currents provided by a high-frequency radar (HFR), since this land-based technology can effectively monitor the upper layer flow over broad coastal areas in near-real time. The low-frequency spatiotemporal response of the ocean was explored in terms of wind-induced currents’ structures and immediacy of reaction. Mean kinetic energy, divergence and vorticity maps were also calculated for upwelling and downwelling favorable events, in order to verify HFR and IBI capabilities, to accurately resolve the prevailing surface circulation features, such as the locus of a persistent upwelling maximum in the vicinity of Cape Finisterre. This integrated approach proved to be well-founded to efficiently portray the three-dimensional characteristics of the NW Iberian coastal upwelling system regardless of few shortcomings detected in IBI performance, such as the misrepresentation of the most energetic surface dynamics or the overestimation of the cooling and warming associated with upwelling and downwelling conditions, respectively. Finally, the variability of the NW Iberian upwelling system was characterized by means of the development of a novel ocean-based coastal upwelling index (UI), constructed from HFR-derived hourly surface current observations (UIHFR). The proposed UIHFR was validated against two traditional UIs for 2014, to assess its credibility. Results suggest that UIHFR was able to adequately categorize and characterize a wealth of summer upwelling and downwelling events of diverse length and strength, paving the way for future investigations of the subsequent biophysical implications.

Description: Shore-based phased-array HF radars have been widely used for remotely sensing ocean surface current, wave, and wind around the world. However, phase uncertainties, especially phase distortions, in receiving elements significantly degrade the performance of beam forming and direction-of-arrival (DOA) estimation for phased-array HF radar. To address this problem, the conventional array signal model is modified by adding a direction-based phase error matrix. Subsequently, an array phase manifold calibration method using antenna responses of incoming ship echoes is proposed. Later, an assessment on the proposed array calibration method is made based on the DOA estimations and current measurements that are obtained from the datasets that were collected with a multi-frequency HF (MHF) radar. MHF radar-estimated DOAs using three calibration strategies are compared with the ship directions that are provided by an Automatic Identification System (AIS). Additionally, comparisons between the MHF radar-derived currents while using three calibration strategies and Acoustic Doppler Current Profilers (ADCP)-measured currents are made. The results indicate that the proposed array calibration method is effective in DOA estimation and current measurement for phased-array HF radars, especially in the phase distortion situation.

Description: In this study we (1) mapped the areal extent of current dust sources over Northern Africa between 8°W–31°E and 22°N - Mediterranean coast; and (2) identified and characterized the geomorphic units and soil types that emit dust from these areas. We used the full resolution (3 km) data from the MSG-SEVIRI to map dust sources over a 2-year period between 2005–2006, and examined these regions with remotely sensed images and geomorphic and soil maps. A total of 〉2600 individual dust emission events were mapped; with frequency up to 34 events in the 2-year study period. The areal extent of dust emission sources exhibited a lognormal distribution with most sources ranging from 20 to 130 km2. Most dust events were singular and related to a variety of specific geomorphic units. Dust events that created hotspots were mostly located over playas and fluvial landforms, and to a lesser extent over sand dunes and anthropogenic affected regions. About 20% of dust hotspots were offset a few kilometers from clear geomorphic units. Quantitative analysis of emissions revealed that dust sourced from various geomorphic units, among them playas (12%) and fluvial systems (10%). The importance of sand dunes as dust-emission sources greatly differs between examined datasets (7% vs. 30%). Our study emphasizes the importance of scattered dust emission events that are not considered as hotspots, as these sources are usually neglected in dust emission modeling.

Description: Surface all-wave net radiation (Rn) is a crucial variable driving many terrestrial latent heat (LE) models that estimate global LE. However, the differences between different Rn products and their impact on global LE estimates still remain unclear. In this study, we evaluated two Rn products, Global LAnd Surface Satellite (GLASS) beta version Rn and Modern-Era Retrospective Analysis for Research and Applications-version 2 (MERRA-2) Rn, from 2007–2017 using ground-measured data from 240 globally distributed in-situ radiation measurements provided by FLUXNET projects. The GLASS Rn product had higher accuracy (R2 increased by 0.04–0.26, and RMSE decreased by 2–13.3 W/m2) than the MERRA-2 Rn product for all land cover types on a daily scale, and the two Rn products differed greatly in spatial distribution and variations. We then determined the resulting discrepancies in simulated annual global LE using a simple averaging model by merging five diagnostic LE models: RS-PM model, SW model, PT-JPL model, MS-PT model, and SIM model. The validation results showed that the estimated LE from the GLASS Rn had higher accuracy (R2 increased by 0.04–0.14, and RMSE decreased by 3–8.4 W/m2) than that from the MERRA-2 Rn for different land cover types at daily scale. Importantly, the mean annual global terrestrial LE from GLASS Rn was 2.1% lower than that from the MERRA-2 Rn. Our study showed that large differences in satellite and reanalysis Rn products could lead to substantial uncertainties in estimating global terrestrial LE.

Description: The aim of the study was to evaluate the changes in glomalin-related soil proteins (GRSP) content, microbial diversity and soil physical quality depending on the type of soil measures of soil improvement and changes in soil health. The study was based on a 100-year stationary field microplot experiment where the soil profiles were collected with preserving the natural soil horizons. The microplot experiment was carried out on eight different soil types: Brunic Arenosol (Dystric I), Rendzic Leptosol, Fluvic Cambisol, Haplic Cambisol (Eutric), Gleyic Phaeozem, Brunic Arenosol (Dystric II), Haplic Cambisol (Eutric II) and Haplic Cambisol (Dystric). These soils are the most common types of agricultural soils in Poland. Relatively significant correlations with the soil quality, physical parameters and the glomalin-related soil proteins have been found. The study determined the total GRSP (T-GRSP) and easily extractable GRSP (EE-GRSP) levels in soils as well as the soil physical quality index and soil’s microbial biodiversity. The GRSP depended on the type of soil and correlated with S-Index and also was responsible for the unique chemical and physical properties of soils. Soils characterized by the highest T-GRSP content belonged to the group of very good and good soil physical quality characterized also by high biological activity, for which there were strong correlations with such parameters as dehydrogenase activity (DHA), microbial biomass content (MBC), microbial nitrogen content (MBN) and total bacteria number (B). The highest T-GRSP content and higher microbial diversity were found in Gleyic Phaeozem, Rendzic Leptosol and Fluvic Cambisol. The T-GRSP and EE-GRSP content were additionally correlated with the number of AMF spores. Very poor and poor soil physical quality according to S-Index characterized Brunic Arenosol (Dystric I) and Haplic Cambisol (Dystric). This research indicates that a specific edaphone of soil microorganisms and GRSP content may be of great importance when assessing a soil’s quality and improvements in soil health. The abundance of glomalin-producing fungi significantly affects the quality of the soil. This effect is particularly important for agricultural soils are threatened by ongoing land degradation.

Description: Detection of terrain features (ridges, spurs, cliffs, and peaks) is a basic research topic in digital elevation model (DEM) analysis and is essential for learning about factors that influence terrain surfaces, such as geologic structures and geomorphologic processes. Detection of terrain features based on general geomorphometry is challenging and has a high degree of uncertainty, mostly due to a variety of controlling factors on surface evolution in different regions. Currently, there are different computational techniques for obtaining detailed information about terrain features using DEM analysis. One of the most common techniques is numerically identifying or classifying terrain elements where regional topologies of the land surface are constructed by using DEMs or by combining derivatives of DEM. The main drawbacks of these techniques are that they cannot differentiate between ridges, spurs, and cliffs, or result in a high degree of false positives when detecting spur lines. In this paper, we propose a new method for automatically detecting terrain features such as ridges, spurs, cliffs, and peaks, using shaded relief by controlling altitude and azimuth of illumination sources on both smooth and rough surfaces. In our proposed method, we use edge detection filters based on azimuth angle on shaded relief to identify specific terrain features. Results show that the proposed method performs similar to or in some cases better (when detecting spurs than current terrain features detection methods, such as geomorphon, curvature, and probabilistic methods.

Description: The shipborne high-frequency surface wave radar (HFSWR) platform produces six degrees of freedom (DOF) motion at sea, which affects the performance of radar target detection and remote sensing of ocean surface dynamics parameters. Motion compensation can mitigate the effect of six-DOF motion, but motion parameters (including amplitude and angular frequency) need to be known. Motion parameters obtained by using high precision sensors are affected by the precision error and time delay, thus affecting the effect of motion compensation. To obtain the motion parameters accurately and in real time, a method of identifying the motion parameters by using an artificially transmitted reference radio frequency (RF) signal generated at the shore is proposed. Based on the results of the parameter identification, the reference RF signal and the first-order radar cross-sections (RCSs) modulated by six-DOF motion of the shipborne HFSWR platform can be compensated. The identification of angular frequency is divided into two steps: (1) Preliminary identification results are obtained by using the reference RF signal; (2) the pattern search method is used to further improve the identification accuracy of angular frequency. The amplitude of translation (including surge and sway) can be identified accurately through the reference RF signal. Due to the small amplitude of rotation (including roll, pitch, and yaw), it needs to be identified by the reference RF signal and pattern search method. After identifying the motion parameters, division in the time domain is used for motion compensation. Through the simulation results, both translation and rotation have good motion compensation effects. In addition, the method of using high precision sensors to obtain motion parameters and compensation is compared with the method in this paper, the simulation results of motion compensation show that the latter is better.

Description: The information of building types is highly needed for urban planning and management, especially in high resolution building modeling in which buildings are the basic spatial unit. However, in many parts of the world, this information is still missing. In this paper, we proposed a framework to derive the information of building type using geospatial data, including point-of-interest (POI) data, building footprints, land use polygons, and roads, from Gaode and Baidu Maps. First, we used natural language processing (NLP)-based approaches (i.e., text similarity measurement and topic modeling) to automatically reclassify POI categories into which can be used to directly infer building types. Second, based on the relationship between building footprints and POIs, we identified building types using two indicators of type ratio and area ratio. The proposed framework was tested using over 440,000 building footprints in Beijing, China. Our NLP-based approaches and building type identification methods show overall accuracies of 89.0% and 78.2%, and kappa coefficient of 0.83 and 0.71, respectively. The proposed framework is transferrable to other China cities for deriving the information of building types from web mapping platforms. The data products generated from this study are of great use for quantitative urban studies at the building level.

Description: Despite the potential implications of a cropland canopy water content (CCWC) thematic product, no global remotely sensed CCWC product is currently generated. The successful launch of the Landsat-8 Operational Land Imager (OLI) in 2012, Sentinel-2A Multispectral Instrument (MSI) in 2015, followed by Sentinel-2B in 2017, make possible the opportunity for CCWC estimation at a spatial and temporal scale that can meet the demands of potential operational users. In this study, we designed and tested a novel radiative transfer model (RTM) inversion technique to combine multiple sources of a priori data in a look-up table (LUT) for inverting the NASA Harmonized Landsat Sentinel-2 (HLS) product for CCWC estimation. This study directly builds on previous research for testing the constraint of the leaf parameter (Ns) in PROSPECT, by applying those constraints in PRO4SAIL in an agricultural setting where the variability of canopy parameters are relatively minimal. In total, 225 independent leaf measurements were used to train the LUTs, and 102 field data points were collected over the 2015–2017 growing seasons for validating the inversions. The results confirm increasing a priori information and regularization yielded the best performance for CCWC estimation. Despite the relatively low variable canopy conditions, the inclusion of Ns constraints did not improve the LUT inversion. Finally, the inversion of Sentinel-2 data outperformed the inversion of Landsat-8 in the HLS product. The method demonstrated ability for HLS inversion for CCWC estimation, resulting in the first HLS-based CCWC product generated through RTM inversion.

Description: The technological growth and accessibility of Unoccupied Aerial Systems (UAS) have revolutionized the way geographic data are collected. Digital Surface Models (DSMs) are an integral component of geospatial analyses and are now easily produced at a high resolution from UAS images and photogrammetric software. Systematic testing is required to understand the strengths and weaknesses of DSMs produced from various UAS. Thus, in this study, we used photogrammetry to create DSMs using four UAS (DJI Inspire 1, DJI Phantom 4 Pro, DJI Mavic Pro, and DJI Matrice 210) to test the overall accuracy of DSM outputs across a mixed land cover study area. The accuracy and spatial variability of these DSMs were determined by comparing them to (1) 12 high-precision GPS targets (checkpoints) in the field, and (2) a DSM created from Light Detection and Ranging (LiDAR) (Velodyne VLP-16 Puck Lite) on a fifth UAS, a DJI Matrice 600 Pro. Data were collected on July 20, 2018 over a site with mixed land cover near Middleton, NS, Canada. The study site comprised an area of eight hectares (~20 acres) with land cover types including forest, vines, dirt road, bare soil, long grass, and mowed grass. The LiDAR point cloud was used to create a 0.10 m DSM which had an overall Root Mean Square Error (RMSE) accuracy of ±0.04 m compared to 12 checkpoints spread throughout the study area. UAS were flown three times each and DSMs were created with the use of Ground Control Points (GCPs), also at 0.10 m resolution. The overall RMSE values of UAS DSMs ranged from ±0.03 to ±0.06 m compared to 12 checkpoints. Next, DSMs of Difference (DoDs) compared UAS DSMs to the LiDAR DSM, with results ranging from ±1.97 m to ±2.09 m overall. Upon further investigation over respective land covers, high discrepancies occurred over vegetated terrain and in areas outside the extent of GCPs. This indicated LiDAR’s superiority in mapping complex vegetation surfaces and stressed the importance of a complete GCP network spanning the entirety of the study area. While UAS DSMs and LiDAR DSM were of comparable high quality when evaluated based on checkpoints, further examination of the DoDs exposed critical discrepancies across the study site, namely in vegetated areas. Each of the four test UAS performed consistently well, with P4P as the clear front runner in overall ranking.

Description: Leaf rust (LR) and stem rust (SR) pose serious challenges to wheat production in Kazakhstan. In recent years, the susceptibility of local wheat cultivars has substantially decreased grain yield and quality. Therefore, local breeding projects must be adjusted toward the improvement of LR and SR disease resistances, including genetic approaches. In this study, a spring wheat segregating population of Pamyati Azieva (PA) × Paragon (Par), consisting of 98 recombinant inbred lines (RILs), was analyzed for the resistance to LR and SR at the seedling and adult plant-growth stages. In total, 24 quantitative trait loci (QTLs) for resistance to rust diseases at the seedling and adult plant stages were identified, including 11 QTLs for LR and 13 QTLs for SR resistances. Fourteen QTLs were in similar locations to QTLs and major genes detected in previous linkage mapping and genome-wide association studies. The remaining 10 QTLs are potentially new genetic factors for LR and SR resistance in wheat. Overall, the QTLs revealed in this study may play an important role in the improvement of wheat resistance to LR and SR per the marker-assisted selection approach.

Description: Radar images suffer from the impact of sidelobes. Several sidelobe-suppressing methods including the convolutional neural network (CNN)-based one has been proposed. However, the point spread function (PSF) in the radar images is sometimes spatially variant and affects the performance of the CNN. We propose the spatial-variant convolutional neural network (SV-CNN) aimed at this problem. It will also perform well in other conditions when there are spatially variant features. The convolutional kernels of the CNN can detect motifs with some distinctive features and are invariant to the local position of the motifs. This makes the convolutional neural networks widely used in image processing fields such as image recognition, handwriting recognition, image super-resolution, and semantic segmentation. They also perform well in radar image enhancement. However, the local position invariant character might not be good for radar image enhancement, when features of motifs (also known as the point spread function in the radar imaging field) vary with the positions. In this paper, we proposed an SV-CNN with spatial-variant convolution kernels (SV-CK). Its function is illustrated through a special application of enhancing the radar images. After being trained using radar images with position-codings as the samples, the SV-CNN can enhance the radar images. Because the SV-CNN reads information of the local position contained in the position-coding, it performs better than the conventional CNN. The advance of the proposed SV-CNN is tested using both simulated and real radar images.

Description: In this paper we document the design, development, results, performance and field applications of a compact directive transmit antenna for the long-range High Frequency ocean RADAR (HFR) systems operating in the International Telecommunication Union (ITU) designated 4MHz and 5MHz radiodetermination bands. The antenna design is based on the combination of the concepts of an electrically small loop with that of travelling wave antenna. This has the effect of inducing a radiated wave predominantly in a direction opposed to that of energy flow on the antenna structures. We demonstrate here that travelling wave design allows for a more compact antenna than other directive options, it has straightforward feed-point matching arrangements, and a flat frequency and phase response over an entire radiodetermination band. In situ measurements of the antenna radiation pattern, obtained with the aid of a drone, correlate well with those obtained from simulations, and show between 8dB and 30dB front-to-back suppression, with a 3dB beam width in the forward lobe of 100∘ or more. The broad-beam radiation pattern ensures proper illumination over the ocean and the significant front-to-back suppression guarantees reduced interference to terrestrial services. The proposed antenna design is compact and straight forward and can be easily deployed by minimal modifications of an existing transmission antenna. The design may be readily adapted to different environments due to the relative insensitivity of its radiation pattern and frequency response to geometric detail. The only downside to these antennas is their relatively low radiation efficiency which, however, may easily be compensated for by the available power output of a typical HFR transmitter. Antennas based on this design are currently deployed at the SeaSonde HFR sites in New South Wales, Australia, with operational ranges up to 200 km offshore despite their low radiating efficiency and the extremely low output power in use at these installations. Due to their directional pattern, it is also planned to test these antennas in phased-array Wellen RADAR (WERA) systems in both the standard receive arrays: where in-band radio frequency noise of terrestrial origin is impacting on data quality, and in the transmit array: to possibly simplify splitting, phasing and tuning requirements.

Description: Supraglacial liquid water at the margins of ice sheets has an important impact on the surface energy balance and can also influence the ice flow when supraglacial lakes drain to the bed. Optical imagery is able to monitor supraglacial lakes during the summer season. Here we developed an alternative method using polarimetric SAR from Sentinel-1 during 2017–2020 to distinguish between liquid water and other surface types at the margin of the Northeast Greenland Ice Stream. This allows the supraglacial hydrology to be monitored during the winter months too. We found that the majority of supraglacial lakes persist over winter. When comparing our results to optical data, we found significantly more water. Even during summer, many lakes are partly or fully covered by a lid of ice and snow. We used our classification results to automatically map the outlines of supraglacial lakes, create time series of water area for each lake, and hence detect drainage events. We even found several winter time drainages, which might have an important effect on ice flow. Our method has problems during the peak of the melt season, but for the rest of the year it provides crucial information for better understanding the component of supraglacial hydrology in the glaciological system.

Description: To investigate the effect of wave-induced mixing on the upper ocean structure, especially under typhoon conditions, an ocean-wave coupled model is used in this study. Two physical processes, wave-induced turbulence mixing and wave transport flux residue, are introduced. We select tropical cyclone (TC) Nepartak in the Northwest Pacific ocean as a TC example. The results show that during the TC period, the wave-induced turbulence mixing effectively increases the cooling area and cooling amplitude of the sea surface temperature (SST). The wave transport flux residue plays a positive role in reproducing the distribution of the SST cooling area. From the intercomparisons among experiments, it is also found that the wave-induced turbulence mixing has an important effect on the formation of mixed layer depth (MLD). The simulated maximum MLD is increased to 54 m and is only 1 m less than the observed value. The wave transport flux residue shows a dominant role in the mixed layer temperature (MLT) changing. The mean error of the MLT is reduced by 0.19 °C compared with the control experiment without wave mixing effects. The study shows that the effect of wave mixing should be included in the upper ocean structure modeling.

Description: The current techniques used for monitoring the blasting process in open pit mines are manual, intermittent and inefficient and can expose technical manpower to hazardous conditions. This study presents the application of unmanned aerial vehicle (UAV) systems for monitoring and improving the blasting process in open pit mines. Field experiments were conducted in different open pit mines to assess rock fragmentation, blast-induced damage on final pit walls, blast dynamics and the accuracy of blastholes including production and pre-split holes. The UAV-based monitoring was done in three different stages, including pre-blasting, blasting and post-blasting. In the pre-blasting stage, pit walls were mapped to collect structural data to predict in situ block size distribution and to develop as-built pit wall digital elevation models (DEM) to assess blast-induced damage. This was followed by mapping the production blasthole patterns implemented in the mine to investigate drillhole alignment. To monitor the blasting process, a high-speed camera was mounted on the UAV to investigate blast initiation, sequencing, misfired holes and stemming ejection. In the post-blast stage, the blasted rock pile (muck pile) was monitored to estimate fragmentation and assess muck pile configuration, heave and throw. The collected aerial data provide detailed information and high spatial and temporal resolution on the quality of the blasting process and significant opportunities for process improvement. The current challenges with regards to the application of UAVs for blasting process monitoring are discussed, and recommendations for obtaining the most value out of an UAV application are provided.

Description: A method for estimation of the turbulent energy dissipation rate from measurements by a conically scanning pulsed coherent Doppler lidar (PCDL), with allowance for the wind transport of turbulent velocity fluctuations, has been developed. The method has been tested in comparative atmospheric experiments with a Stream Line PCDL (Halo Photonics, Brockamin, Worcester, United Kingdom) and a sonic anemometer. It has been demonstrated that the method provides unbiased estimates of the dissipation rate at arbitrarily large ratios of the mean wind velocity to the linear scanning speed.

Description: Pansharpening is a typical image fusion problem, which aims to produce a high resolution multispectral (HRMS) image by integrating a high spatial resolution panchromatic (PAN) image with a low spatial resolution multispectral (MS) image. Prior arts have used either component substitution (CS)-based methods or multiresolution analysis (MRA)-based methods for this propose. Although they are simple and easy to implement, they usually suffer from spatial or spectral distortions and could not fully exploit the spatial and/or spectral information existed in PAN and MS images. By considering their complementary performances and with the goal of combining their advantages, we propose a pansharpening weight network (PWNet) to adaptively average the fusion results obtained by different methods. The proposed PWNet works by learning adaptive weight maps for different CS-based and MRA-based methods through an end-to-end trainable neural network (NN). As a result, the proposed PWN inherits the data adaptability or flexibility of NN, while maintaining the advantages of traditional methods. Extensive experiments on data sets acquired by three different kinds of satellites demonstrate the superiority of the proposed PWNet and its competitiveness with the state-of-the-art methods.

Description: Organic amendments can reportedly sustain and increase lowland rice productivity in smallholder systems. Few studies have assessed locally-available substrates in hydrologically variable floodplain environments. We investigated the effects of green and farmyard manures on rice yields, and total soil C and N in the Kilombero floodplain, Tanzania. At both the fringe and the middle positions, five treatments were applied in 2016 and 2017, comprising (1) non-amended control, (2) farmyard manure, (3) pre-rice legumes, (4) post-rice legumes and (5) a combination of green and farmyard manures. Residual treatment effects were assessed in 2018 when rice plots were uniformly non-amended. Depending on the year and the position, organic amendments increased rice grain yields by 0.7–3.1 Mg ha–1 above the non-amended control. Sole green and farmyard manure applications had similar effects on grain yield, while a combination of green and farmyard manure led to a significant increase in grain yield above both the control and sole applications of organic amendments in both years. The contribution from biological N2 fixation by legumes ranged from 4 to 61 kg N ha–1. Despite partial N balances being mostly negative, we observed positive residual effects on the yield of the non-amended rice in the third year. Such effects reached up to 4 Mg ha−1 and were largest with post-rice legumes, sole or combined with farmyard manure. Irrespective of the position in the floodplain, manures significantly increased soil C and N contents after two years, hence enhancing soil fertility and resulting in increased rice grain yields. Comparable benefits may be obtained along the hydrological gradients of other large river floodplains of the region and beyond.

Description: The aim of this study was to analyse the genetic and phenotypic differentiation of bacteria isolated from root nodules of Trifolium rubens, a rare clover species. The symbiotic compatibility of selected isolates was investigated using two agronomically important plants, red clover (Trifolium pratense L.) and pea (Pisum sativum L.). A high genetic diversity of analysed strains was shown using the Enterobacterial Repetitive Intergenic Consensus Polymerase Chain Reaction (ERIC-PCR) method. Most of the strains showed a high similarity to R. leguminosarum in the 16S rRNA sequence. Two strains were identified as Agrobacterium spp. There was a strong positive correlation between fresh clover weight and the number of root nodules and a statistically significant increase in the number of the root nodules in selected strains compared to the negative control. Phenotypic tests and BIOLOG analysis showed the ability of the analysed strains to grow in different experimental conditions (pH = 6–10, 0.5–3% NaCl, different carbon and nitrogen sources), which makes them suitable for application as an agronomically important factor.

Description: Ecuador Andean purple corn (Zea mays L.) was subjected to a germination process at 15–40 °C for 24–168 incubation hours. Purple corn protein concentrates (PCPCs) were obtained by alkaline extraction at pH 8.0 and pH 10.0, followed by an isoelectric precipitation process at pH 4.0, pH 5.0 and pH 6.0. Proteins and phenolic content of PCPCs was calculated. PCPC antioxidant properties were determined by the ferric-reducing antioxidant power (FRAP) in vitro method and by the 2,2-azinobis, 3-ethyl-benzothiazoline-6-sulfonic acid, (ABTS) in vitro method. Andean purple corn seeds were able to germinate under the germination conditions tested in this study. The higher percentage of germination was of 63.33% at 168 h/25 °C. The PCPCs protein profile was characterized for the presence of six bands with molecular weights of 14.50 kDa, 20.12 kDa, 25.18 kDa, 41.85 kDa, 59.59 kDa, and 65.87 kDa. Germinated PCPC presented a high TPC content with ranges of 605.71–1820.00 mg gallic acid equivalents (GAE)/g PCPC dry weight (DW), germinated PCPC/72 h/25 °C presented a higher value of 1820.00 mg GAE/g PCPC, DW. All germinated PCPCs samples assayed presented strong antioxidant activity when measured by the ABTS and FRAP methods. Germinated PCPC/144 h/35 °C presented high antioxidant activity by ABTS with 804.35 µmol Trolox equivalents (TE)/g PCPC DW and germinated PCPC/144 h/30 °C presented a high value by the FRAP method, 987.83 µmol TE/g PCPC DW.

Description: Weedy rice is one of the most common weeds in rice cultivation in many rice areas throughout the world and it is able to cause significant yield reductions. Weedy rice is characterized by a high biological diversity that permits different populations to be identified on the basis of their morphological and physiological traits. This variability contributes to its success in different environments and allows different abiotic stresses, which are intensified by climate change, to be faced. Taller plants, enhanced tillering, seed shattering and the presence of red pericarp, variable hull coloration and awn morphology, linked to a deeper seed dormancy, are some of the traits that help weedy rice to spread in changing environments. The higher phenotypic plasticity and genetic variability of weedy rice make it more able to cope with temperature variations, intermittent water availability, soil salinity, drought conditions and increased CO2 concentrations than cultivated rice. As these abiotic stresses will become more frequent in the future, weedy rice competitiveness may be higher, with a spread of infestations. Thus, the control of weedy rice should be based on an integration of different preventive and agronomic techniques, a sensible use of herbicides and the use of suitable rice varieties.

Description: Digital Elevation Models (DEMs) are widely used as a proxy for bathymetric data and several studies have attempted to improve DEM accuracy for hydrodynamic (HD) modeling. Most of these studies attempted to quantitatively improve estimates of channel conveyance (assuming a non-braided morphology) rather than accounting for the actual channel planform. Accurate representation of river conveyance and planform in a DEM is critical to HD modeling and can be achieved with a combination of remote sensing (e.g., satellite image) and field data, such as water surface elevation (WSE). Therefore, the objectives of this study are (i) to develop an algorithm for predicting channel conveyance and characterizing planform via satellite images and in situ WSE and (ii) to estimate discharge using the predicted conveyance via an HD model. The algorithm is named River Bathymetry via Satellite Image Compilation (RiBaSIC) and uses Landsat satellite imagery, Shuttle Radar Topography Mission (SRTM) DEM, Multi-Error-Removed Improved-Terrain (MERIT) DEM, and observed WSE. The algorithm is tested on four study areas along the Willamette River, Kushiyara River, Jamuna River, and Solimoes River. Channel slope and predicted hydraulic radius are subsequently estimated for approximating Manning’s roughness factor. Two-dimensional HD models using DEMs modified by the RiBaSIC algorithm and corresponding Manning’s roughness factors are employed for discharge estimation. The proposed algorithm can represent river planform and conveyance in single-channeled, meandering, wandering, and braided river reaches. Additionally, the HD models estimated discharge within 14–19% relative root mean squared error (RRMSE) in simulation of five years period.

Description: Quantifying river discharge is a critical component for hydrological studies, floodplain ecological conservation research, and water resources management. In recent years, a series of remote sensing-based discharge estimation methods have been developed. An example is the use of the near infrared (NIR) band of optical satellite images, with the principle of calculating the ratio between a stable land pixel for calibration (C) and a pixel within the river for measurement (M), applying a linear regression between C/M series and observed discharge series. This study trialed the C/M method, utilizing the Harmonized Landsat and Sentinel-2 (HLS) surface reflectance product on relatively small rivers with 30~100 m widths. Two study sites with different river characteristics and geographic settings in the Murray-Darling Basin (MDB) of Australia were selected as case studies. Two independent sets of HLS data and gauged discharge data for the 2017 and 2018 water years were acquired for modeling and validation, respectively. Results reveal high consistency between the HLS-derived discharge and gauged discharge at both sites. The Relative Root Mean Square Errors are 53% and 19%, and the Nash-Sutcliffe Efficiency coefficients are 0.24 and 0.69 for the two sites. This study supports the effectiveness of applying the fine-resolution HLS for modeling discharge on small rivers based on the C/M methodology, which also provides evidence of using multisource synthesized datasets as the input for discharge estimation.

Description: Testing Fusarium resistance to ear rots in maize requires a well-supported methodology and tests for toxin responses. In this study, commercial hybrids were tested for resistance to Fusarium graminearum, Fusarium culmorum, and Fusarium verticillioides (kernel and silk channel), as well as their toxin response. One third of the hybrids tested showed a similar resistance or susceptibility to the three pathogens and their toxin response, but there is no proof for their genetic background being the same or different. The performance of the remaining hybrids was highly variable and supports the idea of different genetic regulation. The mean ear rot severity of the kernel resistance was doubled compared with the silk channel resistance data. The ear rot and toxin tests displayed significant positive correlations, verifying the decisive role of resistance in toxin regulation. Several hybrids, termed toxigenic hybrids, showed significant extra toxin production, indicating an additional food safety risk. The toothpick method gave more reliable results and a better differentiation of genotypes. The resistance to different Fusarium spp. in a specific growing region should be analyzed separately in independent resistance tests. Through this, the food safety risks could be better identified. Susceptible hybrids should not be used for commercial production.

Description: The study’s objective was to evaluate the influence of thinning on the quality and regularity of yield of ‘Regina’ cherries grown on a dwarf Gisela 5 rootstock. The experiments were conducted in the years 2009–2012 in Western Poland. Trees were thinned using a chemical agent, ammonium thiosulphate (ATS), at doses of 20 g ATS L−1, 30 g ATS L−1 and 40 g ATS L−1, and by hand, and the results of chemical and hand thinning were compared with those obtained for unthinned trees. The course of weather conditions in winter and during flowering had a significant impact on yield. Chemical thinning is known to be an effective method to regulate fruiting of pome trees, but it can also be successful if applied to cherry trees, as reflected by the alternate bearing index, which was the lowest after applying ATS at a dose of 40 g. ATS treatment improved fruit quality in full crop years. Thinning resulted in, among other things, larger and darker fruit and higher content of total soluble solids and titratable acidity. Treatment with 40 g ATS L−1 significantly stimulated the vegetative growth of trees.

Description: On 2 February 2018, the China Seismo-Electromagnetic Satellite (CSES) ZhangHeng 01 (ZH-01) was successfully launched, carrying on board, in addition to a suite of plasma and particle physics instruments, a high precision magnetometer package (HPM), able to observe the ultra-low frequency (ULF) waves. In this paper, a night time Pi2 pulsation observed by CSES is reported for the first time. This Pi2 event occurred on 3 September 2018, and began at 14:30 UT (02:37 magnetic local time), when the satellite was in the southern hemisphere between −49 and −13 magnetic latitude (MLAT). Kakioka (KAK) ground station in Japan detected the same Pi2 between 14:30–14:42 UT (23:30–23:42 local time). The Pi2 oscillations in the compressional, toroidal, and poloidal components at the CSES satellite and the H-component at the KAK station are investigated by estimating coherence, amplitude, and cross-phase. We noticed a high degree of similarity between the Pi2 event in the horizontal component at KAK and the ionospheric fluctuations in the compressional component at CSES. This high correlation indicated the magnetospheric source of the Pi2 event. In addition, Pi2 is exhibited clearly in the δBy component at CSES, which is highly correlated with the ground H component, so the Pi2 event could be explained by the Substorm Current Wedge (SCW). This interpretation is further confirmed by checking the compressional component of Van Allen Probe (VAP) B satellite inside the plasmasphere, which, for the first time, gives observational support for an earlier model. This ULF wave observation shows the consistency and reliability of the high precision magnetometer (HPM) equipped by two fluxgate magnetometers (FGM1 and FGM2) onboard CSES.

Description: Since 2006, an increasing number of French vineyards have chosen to convert to organic farming. One major change in vineyard practices includes replacing chemical pesticides with copper and sulfur-based products in line with Council Regulation (EC) No. 834/2007. This change can make overall management and pest and disease control more difficult and potentially lead to yield losses. From 2013 to 2016, a network of 48 vineyard plots, in southern France, under conventional management and in conversion to organic farming were monitored throughout the three-year conversion phase to investigate the grapevine phytosanitary management of four major pests and diseases and variations in control efficiency. The severity of downy and powdery mildew, grape berry moths, and Botrytis bunch rot were assessed and linked to the protection strategy. The findings showed that pests and diseases were controlled in the third year of conversion at similar efficiency levels as in conventional farming. However, the first two years of conversion were a transitional and less successful period during which higher incidences of cryptogamic diseases were observed. This demonstrates a need for winegrowers to receive more in-depth technical advice and support, especially on pest and disease control, during this critical transition period.

Description: The sugarcane (Saccharum spp. L.) mechanical harvesting system leaves a large amount of straw mulch on the soil surface. The straw mulch may affect soil conditions, root regrowth, and sugarcane yield. Thus, this study assessed the response of sugarcane root system growth and stalk yield to different rates of straw removal. An experiment was conducted in a Rhodic Kandiudox with sand clay loam texture to test the impact of four rates of straw removal: no removal (18.9 Mg ha−1 of dry mass); moderate removal (8.7 Mg ha−1); high removal (4.2 Mg ha−1) and total removal on sugarcane root system and stalk yield. Higher concentrations of roots (60%) were found in the first 40 cm of soil. Moderate straw removal resulted in higher root mass (3.6 Mg ha−1) and stalk production (23 Mg ha−1 of dry mass). However, no straw removal reduced root mass by 20% (105 Mg ha−1). Through regression analysis, it was estimated that retaining between 8.5 and 13 Mg ha−1 of straw resulted in the highest root mass and stalk yield. Managing straw removal to retain a moderate amount enables producers to sustain suitable soil conditions for sugarcane root growth and stalk production while providing straw for industrial use.

Description: Proximal sensing techniques can potentially survey soil and crop variables responsible for variations in crop yield. The full potential of these precision agriculture technologies may be exploited in combination with innovative methods of data processing such as machine learning (ML) algorithms for the extraction of useful information responsible for controlling crop yield. Four ML algorithms, namely linear regression (LR), elastic net (EN), k-nearest neighbor (k-NN), and support vector regression (SVR), were used to predict potato (Solanum tuberosum) tuber yield from data of soil and crop properties collected through proximal sensing. Six fields in Atlantic Canada including three fields in Prince Edward Island (PE) and three fields in New Brunswick (NB) were sampled, over two (2017 and 2018) growing seasons, for soil electrical conductivity, soil moisture content, soil slope, normalized-difference vegetative index (NDVI), and soil chemistry. Data were collected from 39–40 30 × 30 m2 locations in each field, four times throughout the growing season, and yield samples were collected manually at the end of the growing season. Four datasets, namely PE-2017, PE-2018, NB-2017, and NB-2018, were then formed by combing data points from three fields to represent the province data for the respective years. Modeling techniques were employed to generate yield predictions assessed with different statistical parameters. The SVR models outperformed all other models for NB-2017, NB-2018, PE-2017, and PE-2018 dataset with RMSE of 5.97, 4.62, 6.60, and 6.17 t/ha, respectively. The performance of k-NN remained poor in three out of four datasets, namely NB-2017, NB-2018, and PE-2017 with RMSE of 6.93, 5.23, and 6.91 t/ha, respectively. The study also showed that large datasets are required to generate useful results using either model. This information is needed for creating site-specific management zones for potatoes, which form a significant component for food security initiatives across the globe.

Description: High-lying vegetated marshes and low-lying bare mudflats have been suggested to be two stable states in intertidal ecosystems. Being able to identify the conditions enabling the shifts between these two stable states is of great importance for ecosystem management in general and the restoration of tidal marsh ecosystems in particular. However, the number of studies investigating the conditions for state shifts from bare mudflats to vegetated marshes remains relatively low. We developed a GIS approach to identify the locations of expected shifts from bare intertidal flats to vegetated marshes along a large estuary (Western Scheldt estuary, SW Netherlands), by analyzing the interactions between spatial patterns of vegetation biomass, elevation, tidal currents, and wind waves. We analyzed false-color aerial images for locating marshes, LIDAR-based digital elevation models, and spatial model simulations of tidal currents and wind waves at the whole estuary scale (~326 km²). Our results demonstrate that: (1) Bimodality in vegetation biomass and intertidal elevation co-occur; (2) the tidal currents and wind waves change abruptly at the transitions between the low-elevation bare state and high-elevation vegetated state. These findings suggest that biogeomorphic feedback between vegetation growth, currents, waves, and sediment dynamics causes the state shifts from bare mudflats to vegetated marshes. Our findings are translated into a GIS approach (logistic regression) to identify the locations of shifts from bare to vegetated states during the studied period based on spatial patterns of elevation, current, and wave orbital velocities. This GIS approach can provide a scientific basis for the management and restoration of tidal marshes.

Description: High frequency and spatially explicit irrigated land maps are important for understanding the patterns and impacts of consumptive water use by agriculture. We built annual, 30 m resolution irrigation maps using Google Earth Engine for the years 1986–2018 for 11 western states within the conterminous U.S. Our map classifies lands into four classes: irrigated agriculture, dryland agriculture, uncultivated land, and wetlands. We built an extensive geospatial database of land cover from each class, including over 50,000 human-verified irrigated fields, 38,000 dryland fields, and over 500,000 km 2 of uncultivated lands. We used 60,000 point samples from 28 years to extract Landsat satellite imagery, as well as climate, meteorology, and terrain data to train a Random Forest classifier. Using a spatially independent validation dataset of 40,000 points, we found our classifier has an overall binary classification (irrigated vs. unirrigated) accuracy of 97.8%, and a four-class overall accuracy of 90.8%. We compared our results to Census of Agriculture irrigation estimates over the seven years of available data and found good overall agreement between the 2832 county-level estimates (r 2 = 0.90), and high agreement when estimates are aggregated to the state level (r 2 = 0.94). We analyzed trends over the 33-year study period, finding an increase of 15% (15,000 km 2 ) in irrigated area in our study region. We found notable decreases in irrigated area in developing urban areas and in the southern Central Valley of California and increases in the plains of eastern Colorado, the Columbia River Basin, the Snake River Plain, and northern California.

Description: Due to the influence of equipment instability and surveying environment, scattering echoes and other factors, it is sometimes difficult to obtain high-quality sub-bottom profile (SBP) images by traditional denoising methods. In this paper, a novel SBP image denoising method is developed for obtaining underlying clean images based on a non-local low-rank framework. Firstly, to take advantage of the inherent layering structures of the SBP image, a direction image is obtained and used as a guidance image. Secondly, the robust guidance weight for accurately selecting the similar patches is given. A novel denoising method combining the weight and a non-local low-rank filtering framework is proposed. Thirdly, after discussing the filtering parameter settings, the proposed method is tested in actual measurements of sub-bottom, both in deep water and shallow water. Experimental results validate the excellent performance of the proposed method. Finally, the proposed method is verified and compared with other methods quantificationally based on the synthetic images and has achieved the total average peak signal-to-noise ratio (PSNR) of 21.77 and structural similarity index (SSIM) of 0.573, which is far better than other methods.

Description: River discharge is a fundamental hydrologic quantity that summarizes how a watershed transforms the input of precipitation into output as channelized streamflow [...]

Description: Dryland ecosystems are frequently struck by droughts. Yet, woody vegetation is often able to recover from mortality events once precipitation returns to pre-drought conditions. Climate change, however, may impact woody vegetation resilience due to more extreme and frequent droughts. Thus, better understanding how woody vegetation responds to drought events is essential. We used a phenology-based remote sensing approach coupled with field data to estimate the severity and recovery rates of a large scale die-off event that occurred in 2014–2015 in Senegal. Novel low (L-band) and high-frequency (Ku-band) passive microwave vegetation optical depth (VOD), and optical MODIS data, were used to estimate woody vegetation dynamics. The relative importance of soil, human-pressure, and before-drought vegetation dynamics influencing the woody vegetation response to the drought were assessed. The die-off in 2014–2015 represented the highest dry season VOD drop for the studied period (1989–2017), even though the 2014 drought was not as severe as the droughts in the 1980s and 1990s. The spatially explicit Die-off Severity Index derived in this study, at 500 m resolution, highlights woody plants mortality in the study area. Soil physical characteristics highly affected die-off severity and post-disturbance recovery, but pre-drought biomass accumulation (i.e., in areas that benefited from above-normal rainfall conditions before the 2014 drought) was the most important variable in explaining die-off severity. This study provides new evidence supporting a better understanding of the “greening Sahel”, suggesting that a sudden increase in woody vegetation biomass does not necessarily imply a stable ecosystem recovery from the droughts in the 1980s. Instead, prolonged above-normal rainfall conditions prior to a drought may result in the accumulation of woody biomass, creating the basis for potentially large-scale woody vegetation die-off events due to even moderate dry spells.

Description: Augmented reality can improve construction and facility management by visualizing an as-planned model on its corresponding surface for fast, easy, and correct information retrieval. This requires the localization registration of an as-built model in an as-planned model. However, the localization and registration of indoor environments fail, owing to self-similarity in an indoor environment, relatively large as-planned models, and the presence of additional unplanned objects. Therefore, this paper proposes a computer vision-based method to (1) homogenize indoor as-planned and as-built models, (2) reduce the search space of model matching, and (3) localize the structure (e.g., room) for registration of the scanned area in its as-planned model. This method extracts a representative horizontal cross section from the as-built and as-planned point clouds to make these models similar, restricts unnecessary transformation to reduce the search space, and corresponds the line features for the estimation of the registration transformation matrix. The performance of this method, in terms of registration accuracy, is evaluated on as-built point clouds of rooms and a hallway on a building floor. A rotational error of 0.005 rad and a translational error of 0.088 m are observed in the experiments. Hence, the geometric feature described on a representative cross section with transformation restrictions can be a computationally cost-effective solution for indoor localization and registration.

Description: Salt marshes provide important services to coastal ecosystems in the southeastern United States. In many locations, salt marsh habitats are threatened by coastal development and erosion, necessitating large-scale monitoring. Assessing vegetation height across the extent of a marsh can provide a comprehensive analysis of its health, as vegetation height is associated with Above Ground Biomass (AGB) and can be used to track degradation or growth over time. Traditional methods to do this, however, rely on manual measurements of stem heights that can cause harm to the marsh ecosystem. Moreover, manual measurements are limited in scale and are often time and labor intensive. Unoccupied Aircraft Systems (UAS) can provide an alternative to manual measurements and generate continuous results across a large spatial extent in a short period of time. In this study, a multirotor UAS equipped with optical Red Green Blue (RGB) and multispectral sensors was used to survey five salt marshes in Beaufort, North Carolina. Structure-from-Motion (SfM) photogrammetry of the resultant imagery allowed for continuous modeling of the entire marsh ecosystem in a three-dimensional space. From these models, vegetation height was extracted and compared to ground-based manual measurements. Vegetation heights generated from UAS data consistently under-predicted true vegetation height proportionally and a transformation was developed to predict true vegetation height. Vegetation height may be used as a proxy for Above Ground Biomass (AGB) and contribute to blue carbon estimates, which describe the carbon sequestered in marine ecosystems. Employing this transformation, our results indicate that UAS and SfM are capable of producing accurate assessments of salt marsh health via consistent and accurate vegetation height measurements.

Description: Accounting for endmember variability is a challenging issue when unmixing hyperspectral data. This paper models the variability that is associated with each endmember as a conical hull defined by extremal pixels from the data set. These extremal pixels are considered as so-called prototypal endmember spectra that have meaningful physical interpretation. Capitalizing on this data-driven modeling, the pixels of the hyperspectral image are then described as combinations of these prototypal endmember spectra weighted by bundling coefficients and spatial abundances. The proposed unmixing model not only extracts and clusters the prototypal endmember spectra, but also estimates the abundances of each endmember. The performance of the approach is illustrated thanks to experiments conducted on simulated and real hyperspectral data and it outperforms state-of-the-art methods.

Description: Assessments of long-term changes of air quality and global radiative forcing at a large scale heavily rely on satellite aerosol optical depth (AOD) datasets, particularly their temporal binning products. Although some attempts focusing on the validation of long-term satellite AOD have been conducted, there is still a lack of comprehensive quantification and understanding of the representativeness of satellite AOD at different temporal binning scales. Here, we evaluated the performances of the Moderate Resolution Imaging Spectroradiometer (MODIS) AOD products at various temporal scales by comparing the MODIS AOD datasets from both the Terra and Aqua satellites with the entire global AErosol RObotic NETwork (AERONET) observation archive between 2000 and 2017. The uncertainty levels of the MODIS hourly and daily AOD products were similarly high, indicating that MODIS AOD retrievals could be used to represent daily aerosol conditions. The MODIS data showed the reduced quality when integrated from the daily to monthly scale, where the relative mean bias (RMB) changed from 1.09 to 1.21 for MODIS Terra and from 1.04 to 1.17 for MODIS Aqua, respectively. The limitation of valid data availability within a month appeared to be the primary reason for the increased uncertainties in the monthly binning products, and the monthly data associated uncertainties could be reduced when the number of valid AOD retrievals reached 15 times in one month. At all three temporal scales, the uncertainty levels of satellite AOD products decreased with increasing AOD values. The results of this study could provide crucial information for satellite AOD users to better understand the reliability of different temporal AOD binning products and associated uncertainties in their derived long-term trends.

Description: Human activities are mainly responsible for the Aral Sea crisis, and excessive farmland expansion and unreasonable irrigation regimes are the main manifestations. The conflicting needs of agricultural water consumption and ecological water demand of the Aral Sea are increasingly prominent. However, the quantitative relationship among the water balance elements in the oasis located in the lower reaches of the Amu Darya River Basin and their impact on the retreat of the Aral Sea remain unclear. Therefore, this study focused on the water consumption of the Nukus irrigation area in the delta of the Amu Darya River and analyzed the water balance variations and their impacts on the Aral Sea. The surface energy balance algorithm for land (SEBAL) was employed to retrieve daily and seasonal evapotranspiration (ET) levels from 1992 to 2018, and a water balance equation was established based on the results of a remote sensing evapotranspiration inversion. The results indicated that the actual evapotranspiration (ETa) simulated by the SEBAL model matched the crop evapotranspiration (ETc) calculated by the Penman–Monteith method well, and the correlation coefficients between the two ETa sources were greater than 0.8. The total ETa levels in the growing seasons decreased from 1992 to 2005 and increased from 2005 to 2015, which is consistent with the changes in the cultivated land area and inflows from the Amu Darya River. In 2000, 2005 and 2010, the groundwater recharge volumes into the Aral Sea during the growing season were 6.74×109 m3, 1.56×109 m3 and 8.40×109 m3; respectively; in the dry year of 2012, regional ET exceeded the river inflow, and 2.36×109 m3 of groundwater was extracted to supplement the shortage of irrigation water. There is a significant two-year lag correlation between the groundwater level and the area of the southern Aral Sea. This study can provide useful information for water resources management in the Aral Sea region.

Description: In the literature of pan-sharpening based on neural networks, high resolution multispectral images as ground-truth labels generally are unavailable. To tackle the issue, a common method is to degrade original images into a lower resolution space for supervised training under the Wald’s protocol. In this paper, we propose an unsupervised pan-sharpening framework, referred to as “perceptual pan-sharpening”. This novel method is based on auto-encoder and perceptual loss, and it does not need the degradation step for training. For performance boosting, we also suggest a novel training paradigm, called “first supervised pre-training and then unsupervised fine-tuning”, to train the unsupervised framework. Experiments on the QuickBird dataset show that the framework with different generator architectures could get comparable results with the traditional supervised counterpart, and the novel training paradigm performs better than random initialization. When generalizing to the IKONOS dataset, the unsupervised framework could still get competitive results over the supervised ones.

Description: Targeted genome editing using CRISPR-Cas9 has been widely adopted as a genetic engineering tool in various biological systems. This editing technology has been in the limelight due to its simplicity and versatility compared to other previously known genome editing platforms. Several modifications of this editing system have been established for adoption in a variety of plants, as well as for its improved efficiency and portability, bringing new opportunities for the development of transgene-free improved varieties of economically important crops. This review presents an overview of CRISPR-Cas9 and its application in plant genome editing. A catalog of the current and emerging approaches for the implementation of the system in plants is also presented with details on the existing gaps and limitations. Strategies for the establishment of the CRISPR-Cas9 molecular construct such as the selection of sgRNAs, PAM compatibility, choice of promoters, vector architecture, and multiplexing approaches are emphasized. Progress in the delivery and transgene detection methods, together with optimization approaches for improved on-target efficiency are also detailed in this review. The information laid out here will provide options useful for the effective and efficient exploitation of the system for plant genome editing and will serve as a baseline for further developments of the system. Future combinations and fine-tuning of the known parameters or factors that contribute to the editing efficiency, fidelity, and portability of CRISPR-Cas9 will indeed open avenues for new technological advancements of the system for targeted gene editing in plants.

Description: The use of Light Emitting Diode (LED) lights in microscale vegetable production is more and more widespread. In this context, the effect of light spectrum on photosynthesis, growth, shoot yield, pigment content, and nutritional status of einkorn seedlings (Triticum monococcum L. ssp. monococcum), germinated and grown in a nutrient solution, was investigated. Plants were subjected to six different LED light treatments, all having a photon flux density (PFD) of 200 μmol m−2 s−1. Two light treatments were monochromatic (red or blue), three dichromatic (blue and red in the proportion), and one of a wider spectrum (selected as a control). All the light treatments affected the morphological, biochemical, and nutritional status of einkorn seedlings. Overall, the dichromatic treatments were the most effective in stimulating biomass production, CO2 assimilation, and evapotranspiration, as well as contents in chlorophyll a and b and carotenoids, and additionally nitrogen, phosphorous, manganese, iron, and zinc. These results are of relevance for the beneficial effects of dichromatic LED treatments in maximizing einkorn shoot yield and nutritional values, and in limiting energy consumption in indoor cultivation.

Description: Lentil (Lens culinaris Medikus) is one of the most important cool season food legume crops grown in many countries. Seeds are typically rich in protein, fiber, prebiotic carbohydrates and minerals, such as iron and zinc. With changing climate and variability, the lentil crop faces frequent droughts and heat stress of varying intensity in its major production zones. In the present study, a set of 162 lentil accessions selected through the Focused Identification of Germplasm Strategy (FIGS) were screened for tolerance to heat stress and combined heat-drought stresses under field conditions at two contrasting locations, namely Marchouch and Tessaout in Morocco. The results showed a significant genotypic variation for heat tolerance and combined heat-drought tolerance among the accessions at both locations. Based on the heat tolerance index (HTI), accessions, namely ILL 7833, ILL 6338 and ILL 6104, were selected as potential sources of heat tolerance at Marchouch, and ILL 7814 and ILL 8029 at Tessaout. Using the stress tolerance index (STI), ILL 7835, ILL 6075 and ILL 6362 were identified as the most tolerant lines (STI 〉 1) at Marchouch, and ILL 7814, ILL 7835 and ILL 7804 (STI 〉 1) at Tessaout, under the combined heat-drought stress conditions. Accession ILL 7835 was identified as a good source of stable tolerance to heat stress and combined heat-drought stress at both locations.

Description: This study investigates the robustness of the physically-based hydrological model WaSiM (water balance and flow simulation model) for simulating hydrological processes in two data sparse small-scale inland valley catchments (Bankandi-Loffing and Mebar) in Burkina Faso. An intensive instrumentation with two weather stations, three rain recorders, 43 piezometers, and one soil moisture station was part of the general effort to reduce the scarcity of hydrological data in West Africa. The data allowed us to successfully parameterize, calibrate (2014–2015), and validate (2016) WaSiM for the Bankandi-Loffing catchment. Good model performance concerning discharge in the calibration period (R2 = 0.91, NSE = 0.88, and KGE = 0.82) and validation period (R2 = 0.82, NSE = 0.77, and KGE = 0.57) was obtained. The soil moisture (R2 = 0.7, NSE = 0.7, and KGE = 0.8) and the groundwater table (R2 = 0.3, NSE = 0.2, and KGE = 0.5) were well simulated, although not explicitly calibrated. The spatial transposability of the model parameters from the Bankandi-Loffing model was investigated by applying the best parameter-set to the Mebar catchment without any recalibration. This resulted in good model performance in 2014–2015 (R2 = 0.93, NSE = 0.92, and KGE = 0.84) and in 2016 (R2 = 0.65, NSE = 0.64, and KGE = 0.59). This suggests that the parameter-set achieved in this study can be useful for modeling ungauged inland valley catchments in the region. The water balance shows that evaporation is more important than transpiration (76% and 24%, respectively, of evapotranspiration losses) and the surface flow is very sensitive to the observed high interannual variability of rainfall. Interflow dominates the uplands, but base flow is the major component of stream flow in inland valleys. This study provides useful information for the better management of soil and scarce water resources for smallholder farming in the area.

Description: The frequency and intensity of flood quantiles and its attendant damage in agricultural establishments have generated a lot of issues in Ethiopia. Moreover, precise estimates of flood quantiles are needed for efficient design of hydraulic structures; however, quantification of these quantiles in data-scarce regions has been a continuing challenge in hydrologic design. Flood frequency analysis is thus essential to reduce possible flood damage by investigating the most suitable flood prediction model. The annual maximum discharges from six representative stations in the Upper Blue Nile River Basin were fitted to the commonly used nine statistical distributions. This study also assessed the performance evolution of the probability distributions with varying spatial scales, such that three different spatial scales of small-, medium-, and large-scale basins in the Blue Nile River Basin were considered. The performances of the candidate probability distributions were assessed using three goodness-of-fit test statistics, root mean square error, and graphical interpretation approaches to investigate the robust probability distribution for flood frequency analysis over different basin spatial scales. Based on the overall analyses, the generalized extreme value distribution was proven to be a robust model for flood frequency analysis in the study region. The generalized extreme value distribution significantly improved the performance of the flood prediction over different spatial scales. The generalized extreme value flood prediction performance improvement measured in root mean square error varied between 5.84 and 67.91% over other commonly used probability distribution models. Thus, the flood frequency analysis using the generalized extreme value distribution could be essential for the efficient planning and design of hydraulic structures in the Blue Nile River Basin. Furthermore, this study suggests that, in the future, significant efforts should be put to conduct similar flood frequency analyses over the other major river basins of Ethiopia.

Description: Many developing nations are facing severe food insecurity partly because of their dependence on rainfed agriculture. Climate variability threatens agriculture-based community livelihoods. With booming population growth, agricultural land expands, and natural resource extraction increases, leading to changes in land use and land cover characterized by persistent vegetation greening and browning. This can modify local climate variability due to changing land–atmosphere interactions. Yet, for landscapes with significant interannual variability, such as the Mount Elgon ecosystem in Kenya and Uganda, characterizing these changes is a difficult task and more robust methods have been recommended. The current study combined trend (Mann–Kendall and Sen’s slope) and breakpoint (bfast) analysis methods to comprehensively examine recent vegetation greening and browning in Mount Elgon at multiple time scales. The study used both Moderate Resolution Imaging Spectroradiometer (MODIS) Normalized Difference Vegetation Index (NDVI) and Climate Hazards group Infrared Precipitation with Stations (CHIRPS) data and attempted to disentangle nature- versus human-driven vegetation greening and browning. Inferences from a 2019 field study were valuable in explaining some of the observed patterns. The results indicate that Mount Elgon vegetation is highly variable with both greening and browning observable at all time scales. Mann–Kendall and Sen’s slope revealed major changes (including deforestation and reforestation), while bfast detected most of the subtle vegetation changes (such as vegetation degradation), especially in the savanna and grasslands in the northeastern parts of Mount Elgon. Precipitation in the area had significantly changed (increased) in the post-2000 era than before, particularly in 2006–2010, thus influencing greening and browning during this period. The greenness–precipitation relationship was weak in other periods. The integration of Mann–Kendall and bfast proved useful in comprehensively characterizing vegetation greenness. Such a comprehensive description of Mount Elgon vegetation dynamics is an important first step to instigate policy changes for simultaneously conserving the environment and improving livelihoods that are dependent on it.

Description: Airborne laser scanning (ALS) systems tuned to the near-infrared (NIR; 1064 nm) wavelength have become the best available data source for characterizing vegetation structure. Proliferation of multi-spectral ALS (M-ALS) data with lasers tuned at two additional wavelengths (commonly 532 nm; green, and 1550 nm; short-wave infrared (SWIR)) has promoted interest in the benefit of additional wavelengths for forest inventory modelling. In this study, structural and intensity based M-ALS metrics were derived from wavelengths independently and combined to assess their value for modelling forest inventory attributes (Lorey’s height (HL), gross volume (V), and basal area (BA)) and overstorey species diversity (Shannon index (H), Simpson index (D), and species richness (R)) in a diverse mixed-wood forest in Ontario, Canada. The area-based approach (ABA) to forest attribute modelling was used, where structural- and intensity-based metrics were calculated and used as inputs for random forest models. Structural metrics from the SWIR channel (SWIRstruc) were found to be the most accurate for H and R (%RMSE = 14.3 and 14.9), and NIRstruc were most accurate for V (%RMSE = 20.4). The addition of intensity metrics marginally increased the accuracy of HL models for SWIR and combined channels (%RMSE = 7.5). Additionally, a multi-resolution (0.5, 1, 2 m) voxel analysis was performed, where intensity data were used to calculate a suite of spectral indices. Plot-level summaries of spectral indices from each voxel resolution alone, as well as combined with structural metrics from the NIR wavelength, were used as random forest predictors. The addition of structural metrics from the NIR band reduced %RMSE for all models with HL, BA, and V realizing the largest improvements. Intensity metrics were found to be important variables in the 1 m and 2 m voxel models for D and H. Overall, results indicated that structural metrics were the most appropriate. However, the inclusion of intensity metrics, and continued testing of their potential for modelling diversity indices is warranted, given minor improvements when included. Continued analyses using M-ALS intensity metrics and voxel-based indices would help to better understand the value of these data, and their future role in forest management.

Description: This paper studies the effect of variance swap in hedging volatility risk under the mean-variance criterion. We consider two mean-variance portfolio selection problems under Heston’s stochastic volatility model. In the first problem, the financial market is complete and contains three primitive assets: a bank account, a stock and a variance swap, where the variance swap can be used to hedge against the volatility risk. In the second problem, only the bank account and the stock can be traded in the market, which is incomplete since the idiosyncratic volatility risk is unhedgeable. Under an exponential integrability assumption, we use a linear-quadratic control approach in conjunction with backward stochastic differential equations to solve the two problems. Efficient portfolio strategies and efficient frontiers are derived in closed-form and represented in terms of the unique solutions to backward stochastic differential equations. Numerical examples are provided to compare the solutions to the two problems. It is found that adding the variance swap in the portfolio can remarkably reduce the portfolio risk.

Description: This paper investigates the clustering or dependency of extremes in financial returns by estimating the extremal index value, in which smaller values of the extremal index correspond to more clustering. We apply the interval estimator method to determine the extremal index for a range of threshold values in the developed and emerging markets from 2007–2017. The indices we used to represent developed markets are from France, Germany, Italy, Japan, USA, UK, Spain, and Sweden. For the emerging markets, we use indices from China, Brazil, India, Malaysia, Russia, Saudi Arabia, and Portugal. The results show that clustering occurs in the emerging and developed markets under several threshold values. This study will shed light on the dependency structure of financial returns data and the proprieties of the extremes returns. Moreover, understanding clustering of extremes in these markets can help investors reduce the exposure to extreme financial events, such as the financial crisis.

Description: Transformation to Continuous Cover Forestry (CCF) is a long and difficult process in which frequent management interventions rapidly alter forest structure and dynamics with long lasting impacts. Therefore, a critical component of transformation is the acquisition of up-to-date forest inventory data to direct future management decisions. Recently, the use of single tree detection methods derived from unmanned aerial vehicle (UAV) has been identified as being a cost effective method for inventorying forests. However, the rapidly changing structure of forest stands in transformation amplifies the difficultly in transferability of current individual tree detection (ITD) methods. This study presents a novel ITD Bayesian parameter optimisation approach that uses quantile regression and external biophysical tree data sets to provide a transferable and low cost ITD approach to monitoring stands in transformation. We applied this novel method to 5 stands in a variety of transformation stages in the UK and to a independent test study site in California, USA, to assess the accuracy and transferability of this method. Requiring small amounts of training data (15 reference trees) this approach had a mean test accuracy (F-score = 0.88) and provided mean tree diameter estimates (RMSE = 5.6 cm) with differences that were not significance to the ground data (p 〈 0.05). We conclude that this method can be used to monitor forests stands in transformation and thus can also be applied to a wide range of forest structures with limited manual parameterisation between sites.

Description: Glacier surface temperature (GST) is influenced by both the energy flux from the atmosphere above and the thermal dynamics at the ice–water–debris interfaces. However, previous studies on GST are inadequate in time series research and mountain glacier surface temperature retrieval. We evaluate the GST variability at Hailuogou glacier, a temperate glacier located in Southeastern Tibetan Plateau, from 1990 to 2018. We utilized a modified mono-window algorithm to calculate the GST using the Landsat 8 thermal infrared sensor (TIRS) band 10 data and Landsat 5 thematic mapper (TM) band 6 data. Three essential parameters, including the emissivity of ice and snow, atmospheric transmittance, and effective mean atmospheric temperature, were employed in the GST algorithm. The remotely-sensed temperatures were compared with two other single-channel algorithms to validate GST algorithm’s accuracy. Results from different algorithms showed a good agreement, with a mean difference of about 0.6 ℃. Our results showed that the GST of the Hailuogou glacier, both in the upper debris-free part and the lower debris-covered tongue, has experienced a slightly increasing trend at a rate of 0.054 ℃ a−1 during the past decades. Atmospheric warming, expanding debris cover in the lower part, and a darkening debris-free accumulation area are the main causes of the warming of the glacier surface.

Description: Economic and environmental concerns limit peat use for substrate production, promoting interest in alternative materials. Hence, in this study, 16 substrates were obtained by mixing, in a factorial combination, eight substrates with different ratios of peat, rice hulls (RH), and anaerobic digestion residues (ADR) and two types of RH: whole (WRH) or ground RH (GRH). Substrates were physically and chemically characterized and then tested as potting substrates for Pelargonium peltatum ‘Ville de Paris’ and Rosa × hybrida ‘La Sevillana’ production. Physical characteristics worsened the increasing RH content. This problem was partly solved using GRH and adding ADR to the substrates. As for chemical characteristics, RH increased P and K, reducing cation exchange capacity, NO3-N, and Ca, thus causing a possible nutritional imbalance. ADR addition increased all nutrients, restoring the nutritional balance. Geranium and rose plants were negatively affected by an increasing rate of RH. In both species, the use of GRH improved the considered parameters, whereas ADR improved some parameters but only in geranium. It was possible to partly substitute peat with 33% RH, but GRH plus ADR is necessary for geranium production, and facultative for rose. The multiple regression method and principal component analysis appear to be useful tools to understand which substrate parameters, and to what extent, influence the growth of ornamental plants.

Description: Tourism is a primary socio-economic factor on many coastal islands. Tourism contributes to the livelihoods of the residents, but also influences natural resources and energy consumption and can become a significant driver of land conversion and environmental change. Understanding the influence of tourist-related activities is vital for sustainable tourism development. We chose Hainan Island in South China as a research area to study the influence of tourist-driven activities on environmental variables (as Land Surface Temperatures (LST) and related ecosystem variables) during the period of 2000 to 2019. In Hainan, the local economy relies heavily on tourism, with an ever-growing influx of tourists each year. We categorised location-based points of interest (POIs) into two classes, non-tourism sites and tourism-related sites, and utilised satellite data from the cloud-based platform Google Earth Engine (GEE) to extract LST and Normalized Difference Vegetation Index (NDVI) data. We analysed the LST variations, NDVI changes and the land use/land cover (LULC) changes and compared the relative difference in LST and NDVI between the tourism-related sites and non-tourism-related sites. The main findings of this study were: (1) The median LST in the tourism-related sites was relatively higher (1.3) than the LST in the non-tourism-related sites for the 20 years. Moreover, every annual mean LST of tourism-related sites was higher than the LST values in non-tourism-related sites, with an average difference of 1.2 °C for the 20 years and a maximum difference of 1.7 °C. We found higher annual LST anomalies for tourist-related sites compared to non-tourism sites after 2010, which indicated the likely positive differences in LST above the average LST during 20 years for tourism-related sites when compared against the non-tourism related sites, thus highlighting the potential influence of tourism activities on LST. (2) The annual mean NDVI value for tourism-related sites was significantly lower than for non-tourism places every year, with an average NDVI difference of 0.26 between the two sites. (3) The land cover changed significantly: croplands and forests reduced by 3.5% and 2.8% respectively, while the areas covered by orchards and urban areas increased by 2% and 72.3% respectively. These results indicate the influence of the tourism-driven activities includes the relatively high LST, vegetation degradation and land-use conversion particular to urban cover type. The outcome of this work provides a method that combines cloud-based satellite-derived data with location-based POIs data for quantifying the long-term influence of tourism-related activities on sensitive coastal ecosystems. It contributes to designing evidence-driven management plans and policies for the sustainable tourism development in coastal areas.

Description: The variation of soil moisture (SM) is a complex and synthetic process, which is impacted by numerous factors. The effects of these factors on soil moisture are dynamic. As a result, the relationship between soil moisture and explanatory variables varies with time and season. This kind of change should be considered in obtaining fine spatial resolution soil moisture products. We chose a study area with four distinct seasons in the temperate monsoon region. In this research, we established seasonal downscaling models to avoid the influence of seasonal differences. Precipitation, land surface temperature, evapotranspiration, vegetation index, land cover, elevation, slope, aspect and soil texture were taken as explanatory variables to produce fine spatial resolution SM. SM products derived from Advanced Microwave Scanning Radiometer–Earth Observing System (AMSR-E) and Advanced Microwave Scanning Radiometer 2 (AMSR2) were downscaled with the help of machine learning algorithms. We compared three machine learning algorithms of random forest (RF), support vector machine (SVM), and K-nearest neighbors (KNN) to determine the most suitable algorithm for this study. The results show that season-based downscaling is even better than continuous time series. In the analysis of seasonal differences, precipitation plays a dominant role, but its contribution rate is different in each season. Moreover, the influence of vegetation is more prominent in winter, while the influence of terrain is more important in the other three seasons. It could be noted that the accuracy of the RF model is the best among three machine learning algorithms, and the RF-downscaled products have superior matching performance to both AMSR (AMSR-E and AMSR2) SM products and in-situ measurements. The analysis indicates considering seasonal difference and the application of machine learning has high potential for spatial downscaling in remote sensing applications.

Description: Satellite remote sensing and model data play an important role in research and applications of tropical meteorology and climatology over vast, data-sparse oceans and remote continents. Since the first weather satellite was launched by NASA in 1960, a large collection of NASA’s Earth science data is freely available to the research and application communities around the world, significantly improving our overall understanding of the Earth system and environment. Established in the mid-1980s, the NASA Goddard Earth Sciences Data and Information Services Center (GES DISC), located in Maryland, USA, is a data archive center for multidisciplinary, satellite and model assimilation data products. As one of the 12 NASA data centers in Earth sciences, GES DISC hosts several important NASA satellite missions for tropical meteorology and climatology such as the Tropical Rainfall Measuring Mission (TRMM), the Global Precipitation Measurement (GPM) Mission and the Modern-Era Retrospective analysis for Research and Applications (MERRA). Over the years, GES DISC has developed data services to facilitate data discovery, access, distribution, analysis and visualization, including Giovanni, an online analysis and visualization tool without the need to download data and software. Despite many efforts for improving data access, a significant number of challenges remain, such as finding datasets and services for a specific research topic or project, especially for inexperienced users or users outside the remote sensing community. In this article, we list and describe major NASA satellite remote sensing and model datasets and services for tropical meteorology and climatology along with examples of using the data and services, so this may help users better utilize the information in their research and applications.

Description: Data acquisition and an efficient processing method for hydrological model initialization, such as soil moisture and parameter value identification are critical for a physics-based distributed watershed modelling of flood and flood related disasters such as sediment and debris flow. Site measurements can provide accurate estimates of soil moisture, but such techniques are limited due to the number of physical sensors required to cover a large area effectively. Available satellite-based digital soil moisture data ranges from 9 km to 20 km in resolution which obscures the soil moisture details of a hill slope scale. This resolution limitation of available satellite-based distributed soil moisture data has impacted critical analysis of soil moisture resolution variance on physics-based distributed simulation results. Moreover, available satellite-based digital soil moisture data represents only a few centimeters of the top soil column and that would inform little about the effective root-zone wetness. A recently developed soil moisture estimation method called SERVES (Soil moisture Estimation of Root zone through Vegetation index-based Evapotranspiration fraction and Soil properties) overcomes this limitation of satellite-based soil moisture data by estimating distributed effective root zone soil moisture at 30 m resolution. In this study, a distributed watershed hydrological model of a sub-catchment of Reynolds Creek Experimental Watershed was developed with the GSSHA (Gridded Surface Sub-surface Hydrological Analysis) Model. SERVES soil moisture estimated at 30 m resolution was deployed in the watershed hydrological parameter value calibration and identification process. The 30 m resolution SERVES soil moisture data was resampled to 4500 m and 9000 m resolutions and was separately employed in the calibrated hydrological model to determine the soil moisture resolution effect on the model simulated outputs and the model parameter values. It was found that the simulated discharge is underestimated, infiltration rate/volume is overestimated and higher soil moisture state distribution is filtered out as the initial soil moisture resolution was coarsened. To compensate for this disparity in the simulated results, the soil saturated hydraulic conductivity value decreased with respect to the decreased resolutions.

Description: We study numerical algorithms for reflected anticipated backward stochastic differential equations (RABSDEs) driven by a Brownian motion and a mutually independent martingale in a defaultable setting. The generator of a RABSDE includes the present and future values of the solution. We introduce two main algorithms, a discrete penalization scheme and a discrete reflected scheme basing on a random walk approximation of the Brownian motion as well as a discrete approximation of the default martingale, and we study these two methods in both the implicit and explicit versions respectively. We give the convergence results of the algorithms, provide a numerical example and an application in American game options in order to illustrate the performance of the algorithms.

Description: The impact of aerosol spatio-temporal variability on the Arctic radiative budget is not fully constrained. This case study focuses on the intra-Arctic modification of long-range transported aerosol and its direct aerosol radiative effect (ARE). Different types of air-borne and ground-based remote sensing observations (from Lidar and sun-photometer) revealed a high tropospheric aerosol transport episode over two parts of the European Arctic in April 2018. By incorporating the derived aerosol optical and microphysical properties into a radiative transfer model, we assessed the ARE over the two locations. Our study displayed that even in neighboring Arctic upper tropospheric levels, aged aerosol was transformed due to the interplay of removal processes (nucleation scavenging and dry deposition) and alteration of the aerosol source regions (northeast Asia and north Europe). Along the intra-Arctic transport, the coarse aerosol mode was depleted and the visible wavelength Lidar ratio (LR) increased significantly (from 15 to 64–82 sr). However, the aerosol modifications were not reflected on the ARE. More specifically, the short-wave (SW) atmospheric column ARE amounted to +4.4 - +4.9 W m−2 over the ice-covered Fram Strait and +4.5 W m−2 over the snow-covered Ny-Ålesund. Over both locations, top-of-atmosphere (TOA) warming was accompanied by surface cooling. These similarities can be attributed to the predominant accumulation mode, which drives the SW radiative budget, as well as to the similar layer altitude, solar geometry, and surface albedo conditions over both locations. However, in the context of retreating sea ice, the ARE may change even along individual transport episodes due to the ice albedo feedback.

Description: This study aimed to understand which vegetation indices (VIs) are an ideal proxy for describing phenology and interannual variability of Gross Primary Productivity (GPP) in short-rotation coppice (SRC) plantations. Canopy structure- and chlorophyll-sensitive VIs derived from Sentinel-2 images were used to estimate the start and end of the growing season (SOS and EOS, respectively) during the period 2016–2018, for an SRC poplar (Populus spp.) plantation in Lochristi (Belgium). Three different filtering methods (Savitzky–Golay (SavGol), polynomial (Polyfit) and Harmonic Analysis of Time Series (HANTS)) and five SOS- and EOS threshold methods (first derivative function, 10% and 20% percentages and 10% and 20% percentiles) were applied to identify the optimal methods for the determination of phenophases. Our results showed that the MEdium Resolution Imaging Spectrometer (MERIS) Terrestrial Chlorophyll Index (MTCI) had the best fit with GPP phenology, as derived from eddy covariance measurements, in identifying SOS- and EOS-dates. For SOS, the performance was only slightly better than for several other indices, whereas for EOS, MTCI performed markedly better. The relationship between SOS/EOS derived from GPP and VIs varied interannually. MTCI described best the seasonal pattern of the SRC plantation’s GPP (R2 = 0.52 when combining all three years). However, during the extreme dry year 2018, the Chlorophyll Red Edge Index performed slightly better in reproducing growing season GPP variability than MTCI (R2 = 0.59; R2 = 0.49, respectively). Regarding smoothing functions, Polyfit and HANTS methods showed the best (and very similar) performances. We further found that defining SOS as the date at which the 10% or 20% percentile occurred, yielded the best agreement between the VIs and the GPP; while for EOS the dates of the 10% percentile threshold came out as the best.

Description: High-resolution real-time satellite-based precipitation estimation datasets can play a more essential role in flood forecasting and risk analysis of infrastructures. This is particularly true for extended deserts or mountainous areas with sparse rain gauges like Iran. However, there are discrepancies between these satellite-based estimations and ground measurements, and it is necessary to apply adjustment methods to reduce systematic bias in these products. In this study, we apply a quantile mapping method with gauge information to reduce the systematic error of the Precipitation Estimation from Remotely Sensed Information using Artificial Neural Networks-Cloud Classification System (PERSIANN-CCS). Due to the availability and quality of the ground-based measurements, we divide Iran into seven climate regions to increase the sample size for generating cumulative probability distributions within each region. The cumulative distribution functions (CDFs) are then employed with a quantile mapping 0.6° × 0.6° filter to adjust the values of PERSIANN-CCS. We use eight years (2009–2016) of historical data to calibrate our method, generating nonparametric cumulative distribution functions of ground-based measurements and satellite estimations for each climate region, as well as two years (2017–2018) of additional data to validate our approach. The results show that the bias correction approach improves PERSIANN-CCS data at aggregated to monthly, seasonal and annual scales for both the calibration and validation periods. The areal average of the annual bias and annual root mean square errors are reduced by 98% and 56% during the calibration and validation periods, respectively. Furthermore, the averages of the bias and root mean square error of the monthly time series decrease by 96% and 26% during the calibration and validation periods, respectively. There are some limitations in bias correction in the Southern region of the Caspian Sea because of shortcomings of the satellite-based products in recognizing orographic clouds.

Description: Collecting in situ observations from remote, high mountain rivers presents major challenges, yet real-time, high temporal resolution (e.g., daily) discharge data are critical for flood hazard mitigation and river management. In this study, we propose a method for estimating daily river discharge (RD) based on free, operational remote sensing precipitation data (Tropical Rainfall Measuring Mission (TRMM), since 2001). In this method, an exponential filter was implemented to produce a new precipitation time series from daily basin-averaged precipitation data to model the time lag of precipitation in supplying RD, and a linear-regression relationship was constructed between the filtered precipitation time series and observed discharge records. Because of different time lags in the wet season (rainfall-dominant) and dry season (snowfall-dominant), the precipitation data were processed in a segmented way (from June to October and from November to May). The method was evaluated at two hydrological gauging stations in the Upper Brahmaputra (UB) river basin, where Nash–Sutcliffe Efficiency (NSE) coefficients for Nuxia (〉0.85) and Yangcun (〉0.80) indicate good performance. By using the degree-day method to estimate the snowmelt and acquire the time series of new active precipitation (rainfall plus snowmelt) in the target basins, the discharge estimations were improved (NSE 〉 0.9 for Nuxia) compared to the original data. This makes the method applicable for most rivers on the Tibetan Plateau, which are fed mainly by precipitation (including snowfall) and are subject to limited human interference. The method also performs well for reanalysis precipitation data (Chinese Meteorological Forcing Dataset (CMFD), 1980–2000). The real-time or historical discharges can be derived from satellite precipitation data (or reanalysis data for earlier historical years) by using our method.

Description: Drought is a major abiotic stress factor limiting cotton yield. It is important to identify the genotypes that can conserve water under drought stress conditions and improve yield. The objective of the current study was to evaluate cotton genotypes for water conservation traits, i.e., high FTSW (Fraction of Transpirable Soil Water) threshold for transpiration. Plants utilize water slowly by declining transpiration at high FTSW and conserving soil water, which can be used by the plant later in the growing season to improve yield. Fifteen cotton varieties were selected based on their differences in transpiration response to elevated vapor pressure deficit (VPD) to study drought responses. Two pot experiments were carried out in the greenhouse to determine the FTSW threshold for the transpiration rate as the soil dried. A significant variation (p 〈 0.01) in the FTSW threshold values for transpiration decline was observed, ranging from 0.35 to 0.60 among cotton cultivars. Genotypes with high FTSW thresholds also displayed low transpiration under well-watered conditions. Further studies with four selected genotype contrasts in FTSW threshold values for transpiration showed differences (p 〈 0.05 to 0.001) in gas exchange parameters and water potentials. This study demonstrated that there are alternate traits among the cotton genotypes for enhancing soil water conservation to improve yield under water-limited conditions.

Description: The European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) mission with the MIRAS (Microwave Imaging Radiometer using Aperture Synthesis) L-band radiometer provides global soil moisture (SM) data. SM data and products from remote sensing are relatively new, but they are providing significant observations for weather forecasting, water resources management, agriculture, land surface, and climate models assessment, etc. However, the accuracy of satellite measurements is still subject to error from the retrieval algorithms and vegetation cover. Therefore, the validation of satellite measurements is crucial to understand the quality of retrieval products. The objectives of this study, precisely framed within this mission, are (i) validation of the SMOS Level 1C Brightness Temperature (TBSMOS) products in comparison with simulated products from the L-MEB model (TBL-MEB) and (ii) validation of the SMOS Level 2 SM (SMSMOS) products against ground-based measurements at 10 significant Iranian agrometeorological stations. The validations were performed for the period of January 2012 to May 2015 over the Southwest and West of Iran. The results of the validation analysis showed an RMSE ranging between 9 to 13 K and a strong correlation (R = 0.61–0.84) between TBSMOS and TBL-MEB at all stations. The bias values (0.1 to 7.5 K) showed a slight overestimation for TBSMOS at most of the stations. The results of SMSMOS validation indicated a high agreement (RMSE = 0.046–0.079 m3 m−3 and R = 0.65–0.84) between the satellite SM and in situ measurements over all the stations. The findings of this research indicated that SMSMOS shows high accuracy and agreement with in situ measurements which validate its potential. Due to the limitation of SM measurements in Iran, the SMOS products can be used in different scientific and practical applications at different Iranian study areas.