ALBERT

Description: The aim of this study was to examine racial differences in long-term survival among hemodialysis patients after coronary artery bypass grafting (CABG). To our knowledge this has not been previously addressed in the literature. Black and white hemodialysis patients undergoing first-time, isolated CABG procedures between 1992 and 2011 were compared. Survival probabilities were computed using the Kaplan-Meier product-limit method and stratified by race. Hazard ratios (HR) and 95% confidence intervals (CI) were computed using a Cox regression model. A total of 207 (2%) patients were on hemodialysis at the time of CABG. White (n = 80) hemodialysis patients had significantly decreased 5-year survival compared with black (n = 127) patients (adjusted HR = 1.9, 95% CI = 1.2–2.8). Our finding provides useful outcome information for surgeons, primary care providers, and their patients.

Description: Background: Limited by data availability, most disease maps in the literature are for relatively large and subjectively-defined areal units, which are subject to problems associated with polygon maps. High resolution maps based on objective spatial units are needed to more precisely detect associations between disease and environmental factors. Method: We propose to use a Restricted and Controlled Monte Carlo (RCMC) process to disaggregate polygon-level location data to achieve mapping aggregate data at an approximated individual level. RCMC assigns a random point location to a polygon-level location, in which the randomization is restricted by the polygon and controlled by the background (e.g., population at risk). RCMC allows analytical processes designed for individual data to be applied, and generates high-resolution raster maps. Results: We applied RCMC to the town-level birth defect data for New Hampshire and generated raster maps at the resolution of 100 m. Besides the map of significance of birth defect risk represented by p-value, the output also includes a map of spatial uncertainty and a map of hot spots. Conclusions: RCMC is an effective method to disaggregate aggregate data. An RCMC-based disease mapping maximizes the use of available spatial information, and explicitly estimates the spatial uncertainty resulting from aggregation.

Description: The predominant microorganisms in samples taken from shower heads in residences in the Korean city “N” were Stenotrophomonas maltophilia, Sphingomonas paucimobilis, Acidovorax temperans, and Microbacterium lacticum. Legionella was not detected in this case. The volatile organic compounds (VOCs) vinylacetate, NN-DMA, cis-1,2-dichloroethylene, epichlorohydrin, and styrene were measured in five types of plastic pipes: PVC, PB, PP, PE, and cPVC. The rate of multiplication of the heterotrophic plate count (HPC) attached on the copper pipe in contact with hot tap water was higher than the rate for the copper pipe in contact with cold tap water. Biofilm accumulation on stainless steel pipes with added acetate (3 mg/L) was 2.56 times higher than the non-supplemented condition. Therefore, the growth of HPC in the pipe system was affected by the type and availability of nutrients and depended on variables such as heating during the hot water supply.

Description: Bile acid diarrhoea (BAD) is a common disease that requires expensive imaging to diagnose. We have tested the efficacy of a new method to identify BAD, based on the detection of differences in volatile organic compounds (VOC) in urine headspace of BAD vs. ulcerative colitis and healthy controls. A total of 110 patients were recruited; 23 with BAD, 42 with ulcerative colitis (UC) and 45 controls. Patients with BAD also received standard imaging (Se75HCAT) for confirmation. Urine samples were collected and the headspace analysed using an AlphaMOS Fox 4000 electronic nose in combination with an Owlstone Lonestar Field Asymmetric Ion Mobility Spectrometer (FAIMS). A subset was also tested by gas chromatography, mass spectrometry (GCMS). Linear Discriminant Analysis (LDA) was used to explore both the electronic nose and FAIMS data. LDA showed statistical differences between the groups, with reclassification success rates (using an n-1 approach) at typically 83%. GCMS experiments confirmed these results and showed that patients with BAD had two chemical compounds, 2-propanol and acetamide, that were either not present or were in much reduced quantities in the ulcerative colitis and control samples. We believe that this work may lead to a new tool to diagnose BAD, which is cheaper, quicker and easier that current methods.

Description: This paper is a theoretical analysis of mirror tilt in a Michelson interferometer and its effect on the radiant flux over the active area of a rectangular photodetector or image sensor pixel. It is relevant to sensor applications using homodyne interferometry where these opto-electronic devices are employed for partial fringe counting. Formulas are derived for radiant flux across the detector for variable location within the fringe pattern and with varying wave front angle. The results indicate that the flux is a damped sine function of the wave front angle, with a decay constant of the ratio of wavelength to detector width. The modulation amplitude of the dynamic fringe pattern reduces to zero at wave front angles that are an integer multiple of this ratio and the results show that the polarity of the radiant flux changes exclusively at these multiples. Varying tilt angle causes radiant flux oscillations under an envelope curve, the frequency of which is dependent on the location of the detector with the fringe pattern. It is also shown that a fringe count of zero can be obtained for specific photodetector locations and wave front angles where the combined effect of fringe contraction and fringe tilt can have equal and opposite effects. Fringe tilt as a result of a wave front angle of 0.05° can introduce a phase measurement difference of 16° between a photodetector/pixel located 20 mm and one located 100 mm from the optical origin.

Description: Various types of grafts have been traditionally used to restore damaged bones. In the late 1960s, a strong interest was raised in studying ceramics as potential bone grafts due to their biomechanical properties. A bit later, such synthetic biomaterials were called bioceramics. In principle, bioceramics can be prepared from diverse materials but this review is limited to calcium orthophosphate-based formulations only, which possess the specific advantages due to the chemical similarity to mammalian bones and teeth. During the past 40 years, there have been a number of important achievements in this field. Namely, after the initial development of bioceramics that was just tolerated in the physiological environment, an emphasis was shifted towards the formulations able to form direct chemical bonds with the adjacent bones. Afterwards, by the structural and compositional controls, it became possible to choose whether the calcium orthophosphate-based implants remain biologically stable once incorporated into the skeletal structure or whether they were resorbed over time. At the turn of the millennium, a new concept of regenerative bioceramics was developed and such formulations became an integrated part of the tissue engineering approach. Now calcium orthophosphate scaffolds are designed to induce bone formation and vascularization. These scaffolds are often porous and harbor different biomolecules and/or cells. Therefore, current biomedical applications of calcium orthophosphate bioceramics include bone augmentations, artificial bone grafts, maxillofacial reconstruction, spinal fusion, periodontal disease repairs and bone fillers after tumor surgery. Perspective future applications comprise drug delivery and tissue engineering purposes because calcium orthophosphates appear to be promising carriers of growth factors, bioactive peptides and various types of cells.

Description: In this study, a miniaturized high fundamental frequency quartz crystal microbalance (QCM) is fabricated for sensor applications using a wet etching technique. The vibration area is reduced in the fabrication of the high frequency QCM with an inverted mesa structure. To reduce the complexity of the side wall profile that results from anisotropic quartz etching, a rectangular vibration area is used instead of the conventional circular structure. QCMs with high Q values exceeding 25,000 at 47 MHz, 27,000 at 60 MHz, 24,000 at 73 MHz and 25,000 at 84 MHz are fabricated on 4 × 4 mm2 chips with small vibration areas of 1.2 × 1.4 mm2. A PMMA-based flow cell is designed and manufactured to characterize the behavior of the fabricated QCM chip in a liquid. Q values as high as 1,006 at 47 MHz, 904 at 62 MHz, 867 at 71 MHz and 747 at 84 MHz are obtained when one side of the chip is exposed to pure water. These results show that fabricated QCM chips can be used for bio- and chemical sensor applications in liquids.

Description: Finger vein recognition is a promising biometric recognition technology, which verifies identities via the vein patterns in the fingers. Binary pattern based methods were thoroughly studied in order to cope with the difficulties of extracting the blood vessel network. However, current binary pattern based finger vein matching methods treat every bit of feature codes derived from different image of various individuals as equally important and assign the same weight value to them. In this paper, we propose a finger vein recognition method based on personalized weight maps (PWMs). The different bits have different weight values according to their stabilities in a certain number of training samples from an individual. Firstly we present the concept of PWM, and then propose the finger vein recognition framework, which mainly consists of preprocessing, feature extraction, and matching. Finally, we design extensive experiments to evaluate the effectiveness of our proposal. Experimental results show that PWM achieves not only better performance, but also high robustness and reliability. In addition, PWM can be used as a general framework for binary pattern based recognition.

Description: The aim of this work is to study the sensing behavior of Sr-doped hematite for soil water content measurement. The material was prepared by solid state reaction from commercial hematite and strontium carbonate heat treated at 900 °C. X-Ray diffraction, scanning electron microscopy and mercury intrusion porosimetry were used for microstructural characterization of the synthesized powder. Sensors were then prepared by uniaxially pressing and by screen-printing, on an alumina substrate, the prepared powder and subsequent firing in the 800–1,000 °C range. These sensors were first tested in a laboratory apparatus under humid air and then in an homogenized soil and finally in field. The results evidenced that the screen printed film was able to give a response for a soil matric potential from about 570 kPa, that is to say well below the wilting point in the used soil.

Description: Salinity and trace mineral accumulation threaten the sustainability of crop production in many semi-arid parts of the world, including California’s western San Joaquin Valley (WSJV). We used data from a multi-year field-scale trial in Kings County and related container trials to simulate a forage-grazing system under saline conditions. The model uses rainfall and irrigation water amounts, irrigation water quality, soil, plant, and atmospheric variables to predict Bermuda grass (Cynodon dactylon (L.) Pers.) growth, quality, and use by cattle. Simulations based on field measurements and a related container study indicate that although soil chemical composition is affected by irrigation water quality, irrigation timing and frequency can be used to mitigate salt and trace mineral accumulation. Bermuda grass yields of up to 12 Mg dry matter (DM)·ha−1 were observed at the field site and predicted by the model. Forage yield and quality supports un-supplemented cattle stocking rates of 1.0 to 1.2 animal units (AU)·ha−1. However, a balance must be achieved between stocking rate, desired average daily gain, accumulation of salts in the soil profile, and potential pollution of ground water from drainage and leaching. Using available weather data, crop-specific parameter values and field scale measurements of soil salinity and nitrogen levels, the model can be used by farmers growing forages on saline soils elsewhere, to sustain forage and livestock production under similarly marginal conditions.

Description: This paper presents experimental characterization of plasmoids (fireballs) obtained by directing localized microwave power (〈1 kW at 2.45 GHz) onto a silicon-based substrate in a microwave cavity. The plasmoid emerges up from the hotspot created in the solid substrate into the air within the microwave cavity. The experimental diagnostics employed for the fireball characterization in this study include measurements of microwave scattering, optical spectroscopy, small-angle X-ray scattering (SAXS), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). Various characteristics of these plasmoids as dusty plasma are drawn by a theoretical analysis of the experimental observations. Aggregations of dust particles within the plasmoid are detected at nanometer and micrometer scales by both in-situ SAXS and ex-situ SEM measurements. The resemblance of these plasmoids to the natural ball-lightning (BL) phenomenon is discussed with regard to silicon nano-particle clustering and formation of slowly-oxidized silicon micro-spheres within the BL. Potential applications and practical derivatives of this study (e.g., direct conversion of solids to powders, material identification by breakdown spectroscopy (MIBS), thermite ignition, and combustion) are discussed.

Description: In this study, we simulate the electrophoretic motion of a bio-polymer through a synthetic nanopore in the presence of an external bias voltage by considering the hydrodynamic interactions between the polymer and the fluid explicitly. The motion of the polymer is simulated by 3D Langevin dynamics technique by modeling the polymer as a worm-like-chain, while the hydrodynamic interactions are incorporated by the lattice Boltzmann equation. We report the simulation results for three different lengths of the nanopore. The translocation time increases with the pore length even though the electrophoretic force on the polymer is the same irrespective of the pore length. This is attributed to the fact that the translocation velocity of each bead inside the nanopore decreases with the pore length due to the increased fluid resistance force caused by the increase in the straightened portion of the polymer. We confirmed this using a theoretical formula.

Description: Shadows in high resolution imagery create significant problems for urban land cover classification and environmental application. We first investigated whether shadows were intrinsically different and hypothetically possible to separate from each other with ground spectral measurements. Both pixel-based and object-oriented methods were used to evaluate the effects of shadow detection on QuickBird image classification and spectroradiometric restoration. In each method, shadows were detected and separated either with or without histogram thresholding, and subsequently corrected with a k-nearest neighbor algorithm and a linear correlation correction. The results showed that shadows had distinct spectroradiometric characteristics, thus, could be detected with an optimal brightness threshold and further differentiated with a scene-based near infrared ratio. The pixel-based methods generally recognized more shadow areas and with statistically higher accuracy than the object-oriented methods. The effects of the prior shadow thresholding were not statistically significant. The accuracy of the final land cover classification, after accounting for the shadow detection and separation, was significantly higher for the pixel-based methods than for the object-oriented methods, although both achieved similar accuracy for the non-shadow classes. Both radiometric restoration algorithms significantly reduced shadow areas in the original satellite images.

Description: Since the mechanical properties of single cells together with the intercellular adhesive properties determine the macro-mechanical properties of plants, a method for evaluation of the cell elastic properties is needed to help explanation of the behavior of fruits and vegetables in handling and food processing. For this purpose, indentation of tomato mesocarp cells with an atomic force microscope was used. The Young’s modulus of a cell using the Hertz and Sneddon models, and stiffness were calculated from force-indentation curves. Use of two probes of distinct radius of curvature (20 nm and 10,000 nm) showed that the measured elastic properties were significantly affected by tip geometry. The Young’s modulus was about 100 kPa ± 35 kPa and 20 kPa ± 14 kPa for the sharper tip and a bead tip, respectively. Moreover, large variability regarding elastic properties (>100%) among cells sampled from the same region in the fruit was observed. We showed that AFM provides the possibility of combining nano-mechanical properties with topography imaging, which could be very useful for the study of structure-related properties of fruits and vegetables at the cellular and sub-cellular scale.

Description: Despite longstanding contributions to oceanography, similar use of fluorescence light detection and ranging (LiDAR) in lake settings is not routine. The potential for ship-mounted, multispectral Ultraviolet Fluorescence LiDAR (UFL) to provide rapid, high-resolution data in variably turbid and productive lake conditions are investigated here through a series of laboratory tank and field measurements carried out on Lake Balaton, Hungary. UFL data, calibrated empirically to a set of coinciding conventionally-analyzed samples, provide simultaneous estimates of three important parameters-chlorophyll a(chla), total suspended matter (TSM) and colored dissolved organic matter (CDOM). Successful UFL retrievals from both laboratory and field measurements were achieved for chla (0.01–378 mg∙m−3; R = 0.83–0.92), TSM (0.1–130 g∙m−3; R = 0.90–0.96) and CDOM (0.003–0.125 aCDOM(440); R = 0.80–0.97). Fluorescence emission at 685 nm is shown through tank measurements to display robust but distinct relationships with chla concentration for the two cultured algae species investigated (cyanobacteria, Cylindrospermopsis raciborskii, and chlorophyta, Scenedesmus armatus). The ratio between fluorescence emissions measured at 650 nm, related to the phycocyanin fluorescence maximum, to that at 685 nm is demonstrated to effectively distinguish these two species. Validation through both laboratory measurements and field measurements confirmed that site specific calibration is necessary. This study presents the first known assessment and application of ship-mounted fluorescence LiDAR in freshwater lake conditions and demonstrates the use of UFL in measuring important water quality parameters despite the more complicated hydro-optic conditions of inland waters.

Description: Active magnetic bearings (AMBs) have become a key technology in various industrial applications. Self-sensing AMBs provide an integrated sensorless solution for position estimation, consolidating the sensing and actuating functions into a single electromagnetic transducer. The approach aims to reduce possible hardware failure points, production costs, and system complexity. Despite these advantages, self-sensing methods must address various technical challenges to maximize the performance thereof. This paper presents the direct current measurement (DCM) approach for self-sensing AMBs, denoting the direct measurement of the current ripple component. In AMB systems, switching power amplifiers (PAs) modulate the rotor position information onto the current waveform. Demodulation self-sensing techniques then use bandpass and lowpass filters to estimate the rotor position from the voltage and current signals. However, the additional phase-shift introduced by these filters results in lower stability margins. The DCM approach utilizes a novel PA switching method that directly measures the current ripple to obtain duty-cycle invariant position estimates. Demodulation filters are largely excluded to minimize additional phase-shift in the position estimates. Basic functionality and performance of the proposed self-sensing approach are demonstrated via a transient simulation model as well as a high current (10 A) experimental system. A digital implementation of amplitude modulation self-sensing serves as a comparative estimator.

Description: The stability of radiance measurements taken by the Sky Quality Meter (SQM)was tested under rapidly changing temperature conditions during exposure to a stable lightfield in the laboratory. The reported radiance was found to be negatively correlated withtemperature, but remained within 7% of the initial reported radiance over a temperaturerange of -15 °C to 35 °C, and during temperature changes of -33 °C/h and +70 °C/h.This is smaller than the manufacturer’s quoted unit-to-unit systematic uncertainty of 10%,indicating that the temperature compensation of the SQM is adequate under expected outdooroperating conditions.

Description: High-entropy (H-E) alloys, bulk metallic glasses (BMGs) and high-entropy BMGs (HE-BMGs) were statistically analyzed with the help of a database of ternary amorphous alloys. Thermodynamic quantities corresponding to heat of mixing and atomic size differences were calculated as a function of composition of the multicomponent alloys. Actual calculations were performed for configurational entropy (Sconfig.) in defining the H-E alloys and mismatch entropy (Ss) normalized with Boltzmann constant (kB), together with mixing enthalpy (DHmix) based on Miedema’s empirical model and Delta parameter (d) as a corresponding parameter to Ss/kB. The comparison between DHmix–d and DHmix–  diagrams for the ternary amorphous alloys revealed Ss/kB ~ (d /22)2. The zones S, S′ and B’s where H-E alloys with disordered solid solutions, ordered alloys and BMGs are plotted in the DHmix–d diagram are correlated with the areas in the DHmix – Ss /kB diagram. The results provide mutual understandings among H-E alloys, BMGs and HE-BMGs.

Description: Aquaculture coasts have become widely distributed in coastal zones as human activities are intensified. Due to the complexity in this type of coast, it is difficult to extract the coastline with traditional automated mapping approaches. In this paper, we present an automated method—object-based region growing integrating edge detection (OBRGIE) for the extraction of this type of coastline. In this method, a new object feature named OMI (object merging index) is proposed to separate land and sea. The OBRGIE method was applied to Landsat Thematic Mapper (TM) (pixel size 30m) and Satellite Pour l’Observation de la Terre (SPOT-5) (pixel size 10 m) images of two coastal segments with lengths of 272.7 km and 35.5 km respectively, and the accuracy of the extracted coastlines was assessed in comparison with the manually delineated coastlines. The mean and RMSE (root mean square error) are 16.0 m and 16.4 m respectively for the TM images, and 8.0 m and 8.6 m, respectively, for the SPOT-5 images, indicating that the proposed method derives coastlines with pixel accuracy. The OBRGIE method is also found to be robust to the segmentation scale parameter, and the OMI feature is much more effective than the spectral attribute in separating land and sea in aquaculture coasts. This method may provide an inexpensive means of fast coastline mapping from remotely sensed imagery with relatively fine-to-moderate spatial resolution in coastal sectors with intense human interference.

Description: A study was undertaken to assess Envisat Advanced Synthetic Aperture Radar (ASAR) ScanSAR data for quantifying forest growing stock volume (GSV) across three boreal regions with varying forest types, composition, and structure (Sweden, Central Siberia, and Québec). Estimates of GSV were obtained using hyper-temporal observations of the radar backscatter acquired by Envisat ASAR with the BIOMASAR algorithm. In total, 5.3×106 km2 were mapped with a 0.01° pixel size to obtain estimates representative for the year of 2005. Comparing the SAR-based estimates to spatially explicit datasets of GSV, generated from forest field inventory and/or Earth Observation data, revealed similar spatial distributions of GSV. Nonetheless, the weak sensitivity of C-band backscatter to forest structural parameters introduced significant uncertainty to the estimated GSV at full resolution. Further discrepancies were observed in the case of different scales of the ASAR and the reference GSV and in areas of fragmented landscapes. Aggregation to 0.1° and 0.5° was then undertaken to generate coarse scale estimates of GSV. The agreement between ASAR and the reference GSV datasets improved; the relative difference at 0.5° was consistently within a magnitude of 20–30%. The results indicate an improvement of the characterization of forest GSV in the boreal zone with respect to currently available information.

Description: This paper investigates the linear separation requirements for Angle-of-Arrival (AoA) and range sensors, in order to achieve the optimal performance in estimating the position of a target from multiple and typically noisy sensor measurements. We analyse the sensor-target geometry in terms of the Cramer–Rao inequality and the corresponding Fisher information matrix, in order to characterize localization performance with respect to the linear spatial distribution of sensors. Here in this paper, we consider both fixed and adjustable linear sensor arrays.

Description: The problem of drifting charge-induced currents is considered in order to predict the pulsed operational characteristics in photo-and particle-detectors with a junction controlled active area. The direct analysis of the field changes induced by drifting charge in the abrupt junction devices with a plane-parallel geometry of finite area electrodes is presented. The problem is solved using the one-dimensional approach. The models of the formation of the induced pulsed currents have been analyzed for the regimes of partial and full depletion. The obtained solutions for the current density contain expressions of a velocity field dependence on the applied voltage, location of the injected surface charge domain and carrier capture parameters. The drift component of this current coincides with Ramo’s expression. It has been illustrated, that the synchronous action of carrier drift, trapping, generation and diffusion can lead to a vast variety of possible current pulse waveforms. Experimental illustrations of the current pulse variations determined by either the rather small or large carrier density within the photo-injected charge domain are presented, based on a study of Si detectors.

Description: A visible light communication (VLC) system using an organic bulk heterojunction photodetector (OPD) is presented. The system has been successfully proven indoors with an audio signal. The emitter consists of three commercial high-power white LEDs connected in parallel. The receiver is based on an organic photodetector having as active layer a blend of poly(3-hexylthiophene) (P3HT) and phenyl C61-butyric acid methyl ester (PCBM). The OPD is opto-electrically characterized, showing a responsivity of 0.18 A/W and a modulation response of 790 kHz at −6 V.

Description: In form and in content, cities are the epitome of diversity. This state is the result of the accumulation of layers of history, of construction, of demolition and reconstruction cycles. These tensions are the catalyst for the emergence of new urban forms and participate in the construction of heritage. As such they should be encouraged. As important as the existing fabric of the city is, its evolution to accommodate the ever-changing needs and fashions of its inhabitants is paramount. For regeneration to be successful it must inscribe itself in this process and it must be driven by an understanding of the environment where it occurs. This paper explores, through the lens of an architectural practice, some design processes and architectural proposals that have been generated by working on the Valletta harbours. It also discusses the necessary dynamics required to accommodate stakeholder engagement and planning policy while ensuring design quality and the perpetuation of the creative process inherent to the city. Finally, the paper introduces, as a possible future, the experiments and studies of the practice on the wider Valletta, putting into perspective the benefits of theoretical research combined with formal and aesthetic explorations of the harbour region.

Description: An experimental campaign is undertaken in order to investigate the hydraulic features of a vertical drop shaft, also considering the influence of a venting system consisting of a coaxial vertical pipe, projecting within the drop shaft with different plunging rates. Three different flow regimes are observed: a “weir flow” for very low head values, where the flow profile is subject to the atmospheric pressure; a “full flow” for high head values, where water flows in a pressurized regime along the whole shaft; and a “transitional flow” for intermediate water head values. Weir flow and full flow can be experimentally investigated under steady-state conditions, whereas transitional flow is a pulsating condition, alternately switching from full flow to weir flow. Considering some significant geometric parameters, a head-discharge relation is sought both for the non-vented and for the vented configurations, by means of an energy balance equation, with specific assumptions about intake losses.

Description: Applying the particle filter (PF) technique, this paper proposes a PF-based algorithm to blindly demodulate the chaotic direct sequence spread spectrum (CDS-SS) signals under the colored or non-Gaussian noises condition. To implement this algorithm, the PFs are modified by (i) the colored or non-Gaussian noises are formulated by autoregressive moving average (ARMA) models, and then the parameters that model the noises are included in the state vector; (ii) the range-differentiating factor is imported into the intruder’s chaotic system equation. Since the range-differentiating factor is able to make the inevitable chaos fitting error advantageous based on the chaos fitting method, thus the CDS-SS signals can be demodulated according to the range of the estimated message. Simulations show that the proposed PF-based algorithm can obtain a good bit-error rate performance when extracting the original binary message from the CDS-SS signals without any knowledge of the transmitter’s chaotic map, or initial value, even when colored or non-Gaussian noises exist.

Description: As an important part of the smart grid, a wide-area measurement system (WAMS) provides the key technical support for power system monitoring, protection and control. But 20 uncertainties in system parameters and signal transmission time delay could worsen the damping effect and deteriorate the system stability. In the presented study, the subspace system identification technique (SIT) is used to firstly derive a low-order linear model of a power system from the measurements. Then, a novel adaptive wide-area damping control scheme for online tuning of the wide-area damping controller (WADC) parameters using the residue method is proposed. In order to eliminate the effects of the time delay to the signal transmission, a simple and practical time delay compensation algorithm is proposed to compensate the time delay in each wide-area control signal. Detailed examples, inspired by the IEEE test system under various disturbance scenarios, have been used to verify the effectiveness of the proposed adaptive wide-area damping control scheme.

Description: Model membrane approaches have attracted much attention in biomedical sciences to investigate and simulate biological processes. The application of model membrane systems for biosensor measurements is partly restricted by the fact that the integrity of membranes critically depends on the maintenance of an aqueous surrounding, while various biosensors require a preconditioning of dry sensors. This is for example true for the well-established surface acoustic wave (SAW) biosensor SAM®5 blue. Here, a simple drying procedure of sensor-supported model membranes is introduced using the protective disaccharide trehalose. Highly reproducible model membranes were prepared by the Langmuir-Blodgett technique, transferred to SAW sensors and supplemented with a trehalose solution. Membrane rehydration after dry incorporation into the SAW device becomes immediately evident by phase changes. Reconstituted model membranes maintain their full functionality, as indicated by biotin/avidin binding experiments. Atomic force microscopy confirmed the morphological invariability of dried and rehydrated membranes. Approximating to more physiological recognition phenomena, the site-directed immobilization of the integrin VLA-4 into the reconstituted model membrane and subsequent VCAM-1 ligand binding with nanomolar affinity were illustrated. This simple drying procedure is a novel way to combine the model membrane generation by Langmuir-Blodgett technique with SAW biosensor measurements, which extends the applicability of SAM®5 blue in biomedical sciences.

Description: Hull cleaning before repainting is a key operation in the maintenance of ships. For years, a method to improve such operation has been sought by means of the robotization of techniques such as grit blasting and ultra high pressure water jetting. Despite this, it continues to be standard practice in shipyards that this process is carried out manually because the developed robotized systems are too expensive to be widely accepted by shipyards. We have chosen to apply a more conservative and realistic approach to this problem, which has resulted in the development of several solutions that have been designed with different automation and operation range degrees. These solutions are fitted with most of the elements already available in many shipyards, so the installation of additional machinery in the workplace would not be necessary. This paper describes the evolutionary development of sensor systems for the automation of the preparation process of ship hull surfaces before the painting process is performed. Such evolution has given rise to the development of new technologies for coating removal.

Description: Stress corrosion cracks (SCC) in low-pressure steam turbine discs are serious hidden dangers to production safety in the power plants, and knowing the orientation and depth of the initial cracks is essential for the evaluation of the crack growth rate, propagation direction and working life of the turbine disc. In this paper, a method based on phased array ultrasonic transducer and artificial neural network (ANN), is proposed to estimate both the depth and orientation of initial cracks in the turbine discs. Echo signals from cracks with different depths and orientations were collected by a phased array ultrasonic transducer, and the feature vectors were extracted by wavelet packet, fractal technology and peak amplitude methods. The radial basis function (RBF) neural network was investigated and used in this application. The final results demonstrated that the method presented was efficient in crack estimation tasks.

Description: Recently, the duality between values (words) and orderings (permutations) has been proposed by the authors as a basis to discuss the relationship between information theoretic measures for finite-alphabet stationary stochastic processes and their permutatio nanalogues. It has been used to give a simple proof of the equality between the entropy rate and the permutation entropy rate for any finite-alphabet stationary stochastic process and to show some results on the excess entropy and the transfer entropy for finite-alphabet stationary ergodic Markov processes. In this paper, we extend our previous results to hidden Markov models and show the equalities between various information theoretic complexity and coupling measures and their permutation analogues. In particular, we show the following two results within the realm of hidden Markov models with ergodic internal processes: the two permutation analogues of the transfer entropy, the symbolic transfer entropy and the transfer entropy on rank vectors, are both equivalent to the transfer entropy if they are considered as the rates, and the directed information theory can be captured by the permutation entropy approach.

Description: This work is devoted to the systematic study of the optical and magneto-optical properties of sputter deposited CuFe2O4 thin films in the photon energy region between 2 and 5 eV using spectroscopic ellipsometry and magneto-optical Kerr spectroscopy. The spectral dependence of both the diagonal and off-diagonal elements of the permittivity tensor is determined. A complete picture about the electron transitions in CuFe2O4 is suggested in the frame of intervalence charge transfer and intersublattice charge transfer transitions. The effect of deposition conditions and post-deposition treatment in CuFe2O4 films upon the optical and magneto-optical properties is discussed.

Description: In this paper, the formation of ZrO2 and yttria-stabilised-zirconia (YSZ) aqueous colloidal systems via microwave assisted hydrothermal synthesis is studied. Microwave synthesis allows a fast screening of the influence of different parameters such as time and temperature. The temperature varied from 140 °C up to 180 °C and the used reaction time varied from 5 min up to 1 h. The synthesised zirconia nanoparticles have a particle size of 50 nm confirmed by TEM. A 1H NMR (nuclear magnetic resonance) study helped to understand the stabilization mechanism of the synthesised particles. By the addition of ytrrium ions into the zirconia colloidal solution, YSZ could be formed via an additional thermal treatment. Hereby, the samples are heated up to 400 °C for 1 h. YSZ colloidal solutions are synthesised by making use of complexing agents such as nitrilotriacetic acid, ethylenediaminetetraacetic acid and citric acid to control the hydrolysis and condensation of both ions to avoid non-stoichiometric phases. The ratio of Zr/Y in the particles is quantified by XRF. The amorphous structure of those particles necessitates an additional thermal treatment up to 600 °C during 1 h in order to obtain crystalline YSZ.

Description: The recovery behavior for strength and impermeability of cementitious composites embedded with organic microcapsules was investigated in this study. Mortar specimens were formed by mixing the organic microcapsules and a catalyst with cement and sand. The mechanical behaviors of flexural and compression strength were tested. The results showed that strength could increase by up to nine percent with the addition of a small amount of microcapsules and then decrease with an increasing amount of microcapsules. An orthogonal test for investigating the strength recovery rate was designed and implemented for bending and compression using the factors of water/cement ratio, amount of microcapsules, and preloading rate. It is shown that the amount of microcapsules plays a key role in the strength recovery rate. Chloride ion permeability tests were also carried out to investigate the recovery rate and healing effect. The initial damage was obtained by subjecting the specimens to compression. Both the recovery rate and the healing effect were nearly proportional to the amount of microcapsules. The obtained cementitious composites can be seen as self-healing owing to their recovery behavior for both strength and permeability.

Description: This paper provides an overview on our recent investigations on the consolidation of hierarchy-structured nanopowder agglomerates and related applications to net-shaping nanopowder materials. Understanding the nanopowder agglomerate sintering (NAS) process is essential to processing of net-shaped nanopowder materials and components with small and complex shape. The key concept of the NAS process is to enhance material transport through controlling the powder interface volume of nanopowder agglomerates. Based upon this concept, we have suggested a new idea of full density processing for fabricating micro-powder injection molded part using metal nanopowder agglomerates produced by hydrogen reduction of metal oxide powders. Studies on the full density sintering of die compacted- and powder injection molded iron base nano-agglomerate powders are introduced and discussed in terms of densification process and microstructure.

Description: In 2011 an unprecedented epidemic of equine encephalitis occurred in south-eastern (SE) Australia following heavy rainfall and severe flooding in the preceding 2–4 months. Less than 6% of the documented cases occurred in Queensland, prompting the question of pre-existing immunity in Queensland horses. A small-scale serological survey was conducted on horses residing in one of the severely flood-affected areas of SE-Queensland. Using a flavivirus-specific blocking-ELISA we found that 63% (39/62) of horses older than 3 years were positive for flavivirus antibodies, and of these 18% (7/38) had neutralizing antibodies to Murray Valley encephalitis virus (MVEV), Kunjin virus (WNVKUN) and/or Alfuy virus (ALFV). The remainder had serum-neutralizing antibodies to viruses in the Kokobera virus (KOKV) complex or antibodies to unknown/untested flaviviruses. Amongst eight yearlings one presented with clinical MVEV-encephalomyelitis, while another, clinically normal, had MVEV-neutralizing antibodies. The remaining six yearlings were flavivirus antibody negative. Of 19 foals born between August and November 2011 all were flavivirus antibody negative in January 2012. This suggests that horses in the area acquire over time active immunity to a range of flaviviruses. Nevertheless, the relatively infrequent seropositivity to MVEV, WNVKUN and ALFV (15%) suggests that factors other than pre-existing immunity may have contributed to the low incidence of arboviral disease in SE-Queensland horses during the 2011 epidemic.

Description: With an ever increasing population rate; a vast array of biomass wastes rich in organic and inorganic nutrients as well as pathogenic microorganisms will result from the diversified human, industrial and agricultural activities. Anaerobic digestion is applauded as one of the best ways to properly handle and manage these wastes. Animal wastes have been recognized as suitable substrates for anaerobic digestion process, a natural biological process in which complex organic materials are broken down into simpler molecules in the absence of oxygen by the concerted activities of four sets of metabolically linked microorganisms. This process occurs in an airtight chamber (biodigester) via four stages represented by hydrolytic, acidogenic, acetogenic and methanogenic microorganisms. The microbial population and structure can be identified by the combined use of culture-based, microscopic and molecular techniques. Overall, the process is affected by bio-digester design, operational factors and manure characteristics. The purpose of anaerobic digestion is the production of a renewable energy source (biogas) and an odor free nutrient-rich fertilizer. Conversely, if animal wastes are accidentally found in the environment, it can cause a drastic chain of environmental and public health complications.

Description: Scant information is available on determinants of smoking prevalence in the vulnerable population of the elderly, particularly in Europe. Therefore, we analyzed smoking patterns among older adults (≥65 years old), using data from a representative survey based on 3,071 elderly, conducted in 17 European countries in 2010, within the Pricing Policies And Control of Tobacco in Europe (PPACTE) project. Overall smoking prevalence in 17 European countries was 11.5% (15.3% in men and 8.6% in women). An inverse relation with level of education was observed among men, while no specific pattern was evident among women. Smoking prevalence was highest in eastern/central Europe for men (20.3%) and northern Europe for women (13.1%). In both sexes combined, smokers were more frequent in countries with low implementation of tobacco control activities (14.9%). Anti-tobacco campaigns and smoking cessation interventions specifically targeted to the elderly are urgently needed in Europe.

Description: The effect of individual and combined talc and glass fibers (GFs) on mechanical and thermal expansion performance of the filled high density polyethylene (HDPE) composites was studied. Several published models were adapted to fit the measured tensile modulus and strength of various composite systems. It was shown that the use of silane-modified GFs had a much larger effect in improving mechanical properties and in reducing linear coefficient of thermal expansion (LCTE) values of filled composites, compared with the use of un-modified talc particles due to enhanced bonding to the matrix, larger aspect ratio, and fiber alignment for GFs. Mechanical properties and LCTE values of composites with combined talc and GF fillers varied with talc and GF ratio at a given total filler loading level. The use of a larger portion of GFs in the mix can lead to better composite performance, while the use of talc can help lower the composite costs and increase its recyclability. The use of 30 wt % combined filler seems necessary to control LCTE values of filled HDPE in the data value range generally reported for commercial wood plastic composites. Tensile modulus for talc-filled composite can be predicted with rule of mixture, while a PPA-based model can be used to predict the modulus and strength of GF-filled composites.

Description: SBA-15 is an interesting mesoporous silica material having highly ordered nanopores and a large surface area, which is widely employed as catalyst supports, absorbents, drug delivery materials, etc. Since it has a lack of functionality, heteroatoms and organic functional groups have been incorporated by direct or post-synthesis methods in order to modify their functionality. The aim of this article is to review the state-of-the-art related to the use of SBA-15-based mesoporous systems as supports for hydrodesulfurization (HDS) catalysts.

Description: The adsorption of Th(IV) onto the surface of oxidized multi-walled carbon nanotubes (oMWCNTs) in the absence and presence of hydroxylated fullerene (C60(OH)n) and carboxylated fullerene (C60(C(COOH)2)n) has been investigated. C60(OH)n, C60(C(COOH)2)n and oMWCNTs have been chosen as model phases because of their representative in carbon nano-materials family. Adsorption experiments were performed by batch procedure as a function of contact time, pH, ionic strength, and temperature. The results demonstrated that the adsorption of Th(IV) was rapidly reached equilibrium and the kinetic process could be described by a pseudo-second-order rate model very well. Th(IV) adsorption on oMWCNTs was dependent on pH but independent on ionic strength. Adsorption isotherms were correlated better with the Langmuir model than with the Freundlich model. The thermodynamic parameters calculated from temperature-dependent adsorption isotherms suggested that Th(IV) adsorption on oMWCNTs was spontaneous and endothermic. Compared with the adsorption of Th(IV) on the same oMWCNTs free of C60(OH)n or C60(C(COOH)2)n, the study of a ternary system showed the inhibition effect of C60(OH)n at high concentration on the adsorption of Th(IV) in a pH range from neutral to slightly alkaline; whereas the promotion effect of C60(C(COOH)2)n, even at its low concentration, on Th(IV) adsorption was observed in acid medium.

Description: To investigate the gradual failure of high-density polyethylene (HDPE) geomembrane as a result of long-term corrosion, four dynamic corrosion tests were conducted at different temperatures and durations. By combining tension and puncture tests, we systematically studied the variation law of tension and puncture properties of the HDPE geomembrane under different corrosion conditions. Results showed that tension and puncture failure of the HDPE geomembrane was progressive, and tensile strength in the longitudinal grain direction was evidently better than that in the transverse direction. Punctures appeared shortly after puncture force reached the puncture strength. The tensile strength of geomembrane was in inversely proportional to the corrosion time, and the impact of corrosion was more obvious in the longitudinal direction than transverse direction. As corrosion time increased, puncture strength decreased and corresponding deformation increased. As with corrosion time, the increase of corrosion temperature induced the decrease of geomembrane tensile strength. Tensile and puncture strength were extremely sensitive to temperature. Overall, residual strength had a negative correlation with corrosion time or temperature. Elongation variation increased initially and then decreased with the increase in temperature. However, it did not show significant law with corrosion time. The reduction in puncture strength and the increase in puncture deformation had positive correlations with corrosion time or temperature. The geomembrane softened under corrosion condition. The conclusion may be applicable to the proper designing of the HDPE geomembrane in landfill barrier system.

Description: The Multi-angle Imaging SpectroRadiometer (MISR) instrument aboard the Terra satellite acquires imagery at 275-m resolution at nine angles ranging from 0° (nadir) to 70° off-nadir. This multi-angle capability facilitates the stereoscopic retrieval of heights and motion vectors for clouds and aerosol plumes. MISR’s operational stereo product uses this capability to retrieve cloud heights and winds for every satellite orbit, yielding global coverage every nine days. The MISR INteractive eXplorer (MINX) visualization and analysis tool complements the operational stereo product by providing users the ability to retrieve heights and winds locally for detailed studies of smoke, dust and volcanic ash plumes, as well as clouds, at higher spatial resolution and with greater precision than is possible with the operational product or with other space-based, passive, remote sensing instruments. This ability to investigate plume geometry and dynamics is becoming increasingly important as climate and air quality studies require greater knowledge about the injection of aerosols and the location of clouds within the atmosphere. MINX incorporates features that allow users to customize their stereo retrievals for optimum results under varying aerosol and underlying surface conditions. This paper discusses the stereo retrieval algorithms and retrieval options in MINX, and provides appropriate examples to explain how the program can be used to achieve the best results.

Description: Roads play an indispensable role as part of the infrastructure of society. In recent years, society has witnessed the rapid development of laser mobile mapping systems (LMMS) which, at high measurement rates, acquire dense and accurate point cloud data. This paper presents a way to automatically estimate the required excavation volume when widening a road from point cloud data acquired by an LMMS. Firstly, the input point cloud is down-sampled to a uniform grid and outliers are removed. For each of the resulting grid points, both on and off the road, the local surface normal and 2D slope are estimated. Normals and slopes are consecutively used to separate road from off-road points which enables the estimation of the road centerline and road boundaries. In the final step, the left and right side of the road points are sliced in 1-m slices up to a distance of 4 m, perpendicular to the roadside. Determining and summing each sliced volume enables the estimation of the required excavation for a widening of the road on the left or on the right side. The procedure, including a quality analysis, is demonstrated on a stretch of a mountain road that is approximately 132 m long as sampled by a Lynx LMMS. The results in this particular case show that the required excavation volume on the left side is 8% more than that on the right side. In addition, the error in the results is assessed in two ways. First, by adding up estimated local errors, and second, by comparing results from two different datasets sampling the same piece of road both acquired by the Lynx LMMS. Results of both approaches indicate that the error in the estimated volume is below 4%. The proposed method is relatively easy to implement and runs smoothly on a desktop PC. The whole workflow of the LMMS data acquisition and subsequent volume computation can be completed in one or two days and provides road engineers with much more detail than traditional single-point surveying methods such as Total Station or GPS profiling. A drawback is that an LMMS system can only sample what is within the view of the system from the road.

Description: The Board of Parks and Recreation in Vancouver, BC approved a smoke-free bylaw in the city’s parks, beaches and recreational facilities, effective 1 September 2010. We analyzed local news coverage and portrayal of the bylaw to understand the potential influence of news media on public perception of the bylaw in order to inform the media advocacy work of public health interest groups. We compiled a data set of newspaper articles (n = 90) and conducted a quantitative content analysis to examine content related to the outdoor smoke-free policy, including article slant, topics related to smoking and tobacco control, and any equity-related concerns raised. Newspaper coverage in Vancouver was largely supportive of the outdoor smoke-free bylaw. However, concerns over rights were frequently discussed in letters to the editor. Such equity concerns were rarely discussed in news articles, showing a potential disconnect between the concerns expressed in the media by members of the public and the coverage provided by print media.

Description: Nano zinc oxide (ZnO) with moderate surface area and high pore volume were prepared using a facile preparation method. Chitosan was utilized as both chelating and structure directing agent. The application of chitosans in this study suggested that even biowastes can be served in a productive manner economically. The surface modification of chitosan was carried out in order to increase the interaction between chitosan and zinc ions. The effect of sodium chloroacetate and isopropyl alcohol on the surface modification process was also explored. FT-IR (Fourier transform-infrared spectrometer) and TGA (Thermogravimetric analyses) analyses revealed that modified chitosans are more stable than those of unmodified chitosan. Among surface modified chitosans, CMC1 (1.5 M sodium chloroacetate and 75% isopropyl alcohol) showed enhanced surface properties. Freundlich adsorption isotherms as preliminary studies confirmed that modified chitosan showed enhanced interaction with zinc ions. The interaction of zinc salt with chitosans produced a zinc-chitosan polymer. This finally cleaved upon calcination to produce nano ZnO. The effects of different calcination temperatures indicated that 450 °C is the optimum calcination temperature to produce the nano ZnO with favored surface area (15.45 m2/g) and pore size (221.40 nm). SEM (Scanning electron microscope) and TEM (Transmission electron microscope) of ZnO indicated that uniform particle and shape distributions were obtained at low calcination temperature (450 °C).

Description: A groundwater risk assessment was carried out for 30 potable water supply systems under a framework of protecting drinking water quality across South Australia. A semi-quantitative Groundwater Risk Assessment Model (GRAM) was developed based on a “multi-barrier” approach using likelihood of release, contaminant pathway and consequence equation. Groundwater vulnerability and well integrity have been incorporated to the pathway component of the risk equation. The land use of the study basins varies from protected water reserves to heavily stocked grazing lands. Based on the risk assessment, 15 systems were considered as low risk, four as medium and 11 systems as at high risk. The GRAM risk levels were comparable with indicator bacteria—total coliform—detection. Most high risk systems were the result of poor well construction and casing corrosion rather than the land use. We carried out risk management actions, including changes to well designs and well operational practices, design to increase time of residence and setting the production zone below identified low permeable zones to provide additional barriers to contaminants. The highlight of the risk management element is the well integrity testing using down hole geophysical methods and camera views of the casing condition.

Description: In the State of Israel, advanced legislation for the management of scarce water resources, including legislation to prevent water pollution, were put in place in the early stages of the State’s formation. Despite that, on-going uncontrolled pollution has deteriorated the quality of water sources for decades, with the main source of pollution being untreated or partially treated domestic wastewater. This has been mainly the result of lack of enforcement of the existing laws. During the 1990s and onwards, a shift to forceful enforcement has been observed and wastewater treatment substantially improved. The paper analyzes the implementation processes of the pollution control legislations (the lack-of and the shift to forceful enforcement) based on an actor-centered approach, using the contextual interaction theory.

Description: The authors wish to acknowledge a funding agency in their recently published paper [1] and make the following correction.

Description: In this paper, a power supply system for hybrid renewable energy conversion is proposed, which can process PV (photovoltaic) power and wind-turbine energy simultaneously for step-down voltage and high current applications. It is a dual-input converter and mainly contains a PV energy source, a wind turbine energy source, a zero-voltage-switching (ZVS) forward converter, and a current-doubler rectifier. The proposed power supply system has the following advantages: (1) PV-arrays and wind-energy sources can alternatively deliver power to the load during climate or season alteration; (2) maximum power point tracking (MPPT) can be accomplished for both different kinds of renewable-energy sources; (3) ZVS and synchronous rectification techniques for the active switches of the forward converter are embedded so as to reduce switching and conducting losses; and (4) electricity isolation is naturally obtained. To achieve an optimally dynamic response and to increase control flexibility, a digital signal processor (DSP) is investigated and presented to implement MPPT algorithm and power regulating scheme. Finally, a 240 W prototype power supply system with ZVS and current-doubler features to deal with PV power and wind energy is built and implemented. Experimental results are presented to verify the performance and the feasibility of the proposed power supply system.

Description: High penetration of wind power in the electricity system provides many challenges to power system operators, mainly due to the unpredictability and variability of wind power generation. Although wind energy may not be dispatched, an accurate forecasting method of wind speed and power generation can help power system operators reduce the risk of an unreliable electricity supply. This paper proposes an enhanced particle swarm optimization (EPSO) based hybrid forecasting method for short-term wind power forecasting. The hybrid forecasting method combines the persistence method, the back propagation neural network, and the radial basis function (RBF) neural network. The EPSO algorithm is employed to optimize the weight coefficients in the hybrid forecasting method. To demonstrate the effectiveness of the proposed method, the method is tested on the practical information of wind power generation of a wind energy conversion system (WECS) installed on the Taichung coast of Taiwan. Comparisons of forecasting performance are made with the individual forecasting methods. Good agreements between the realistic values and forecasting values are obtained; the test results show the proposed forecasting method is accurate and reliable.

Description: The sustainability of agricultural production in the twenty-first century, both in industrialized and developing countries, benefits from the integration of farm management with information technology such that individual plants, rows, or subfields may be endowed with a singular “identity.” This approach approximates the nature of agricultural processes to the engineering of industrial processes. In order to cope with the vast variability of nature and the uncertainties of agricultural production, the concept of crop biometrics is defined as the scientific analysis of agricultural observations confined to spaces of reduced dimensions and known position with the purpose of building prediction models. This article develops the idea of crop biometrics by setting its principles, discussing the selection and quantization of biometric traits, and analyzing the mathematical relationships among measured and predicted traits. Crop biometric maps were applied to the case of a wine-production vineyard, in which vegetation amount, relative altitude in the field, soil compaction, berry size, grape yield, juice pH, and grape sugar content were selected as biometric traits. The enological potential of grapes was assessed with a quality-index map defined as a combination of titratable acidity, sugar content, and must pH. Prediction models for yield and quality were developed for high and low resolution maps, showing the great potential of crop biometric maps as a strategic tool for vineyard growers as well as for crop managers in general, due to the wide versatility of the methodology proposed.

Description: Biodiesel produced from vegetable oils, animal fats and algae oil is a renewable, environmentally friendly and clean alternative fuel that reduces pollutants and greenhouse gas emissions in marine applications. This study investigates the influence of biodiesel blend on the characteristics of residual and distillate marine fuels. Adequate correlation equations are applied to calculate the fuel properties of the blended marine fuels with biodiesel. Residual marine fuel RMA has inferior fuel characteristics compared with distillate marine fuel DMA and biodiesel. The flash point of marine fuel RMA could be increased by 20% if blended with 20 vol% biodiesel. The sulfur content of residual marine fuel could meet the requirement of the 2008 MARPOL Annex VI Amendment by blending it with 23.0 vol% biodiesel. In addition, the kinematic viscosity of residual marine fuel could be reduced by 12.9% and the carbon residue by 23.6% if 20 vol% and 25 vol% biodiesel are used, respectively. Residual marine fuel blended with 20 vol% biodiesel decreases its lower heating value by 1.9%. Moreover, the fuel properties of residual marine fuel are found to improve more significantly with biodiesel blending than those of distillate marine fuel.

Description: The paper discusses methods of evaluating thermodynamic properties of landscape cover based on multi-spectral measurements by the Landsat satellites. Authors demonstrate how these methods could be used for studying functionality of landscapes and for spatial interpolation of Flux NET system measurements.

Description: In 2005, three fishermen, with artisan fishing vessels and drift gillnets, accidentally captured around 200 dolphins between Vigia and Salinópolis in the Amazon River estuary. The dolphins died and they then prepared their vaginas and penises in order to sell them in the Ver-ao-Peso market in the city of Belem within the Brazilian state of Pará. We randomly sampled a minimal quantity of tissue of these sexual organs from 78 of these 200 dolphins and we determined the following results after sequencing 689 base pairs (bp) from the mitochondrial control region gene: (1) 96.15% (75/78) of these dolphins belonged to the species Sotalia guianensis. The other species detected were Steno brenadensis, Stenella coeruleoalba and Tursiops truncatus; (2) The levels of gene diversity found in this sample of S. guianensis were high (33 haplotypes, haplotype diversity of 0.917 and nucleotide diversity of 0.0045) compared to gene diversities found in other Brazilian S. guianensis locations; (3) All the population genetics methods employed indicated a clear population expansion in this population. This population expansion could have begun 400,000 years ago; (4) The haplotype divergence within this population could have begun around 2.1 millions of years ago (MYA), with posterior splits around 2.0–1.8 MYA, 1.7–1.8 MYA, 1–1.5 MYA, 0.6–0.8 MYA, 0.4–0.2 MYA and 0.16–0.02 MYA, all during the Pleistocene.

Description: Raised public concern in the European Union (EU) about the legality of its timber imports has pushed the European Commission to raise its standards and legality demands for wood imports. Combining literature reviews, structured interviews and trade data analyses, this study assesses the potential influence from Forest Law Enforcement Governance and Trade (FLEGT) (with its Voluntary Partnership Agreements (VPA) system and new legislation EU Timber Regulation (EUTR)), and third party verification schemes on the timber trade between tropical countries and Europe. These instruments have the potential to reduce the amount of illegally sourced timber being placed on the market, and they seem to have resulted in both increasing support of legality verification and certification uptake. However, there are signs of increased ambiguity in trade that could originate as a side effect of the transition towards a stricter regulation for tropical timber. Such ambiguity is explicitly taken into account here. Possible consequences from increased ambiguity are substitution of oak lumber for tropical hardwood lumber, and a diversion of exports of tropical timber to destinations with a less stringent regulatory framework than the EU. Evidence of these trade patterns in the literature reviews, interviews, and trade data analyses seems to confirm that ambiguity in international trade markets has actually increased since the introduction of these instruments.

Description: This study examined factors associated with point-of-sale tobacco marketing in St. Louis, an urban city in the United States. Using spatial analysis, descriptive statistics, and multilevel modeling, we examined point-of-sale data and the proportion of mentholated cigarette and total cigarette marketing from 342 individual tobacco retail stores within St. Louis census tracts characterized by the percent of black adults and children. Menthol and total tobacco product marketing was highest in areas with the highest percentages of black residents. When examining menthol marketing to children, we did not find as strong of a relationship, however results of multilevel modeling indicate that as the proportion of black children in a census tract increased, the proportion of menthol marketing near candy also increased. These results indicate the need for communities globally to counter this targeted marketing by taking policy action specifically through the enactment of marketing restrictions provided by the 2009 Family Smoking Prevention and Tobacco Control Act and the Framework Convention of Tobacco Control.

Description: Hepatitis E virus (HEV) is responsible for epidemics and endemics of acute hepatitis in humans, mainly through waterborne, foodborne, and zoonotic transmission routes. HEV is a single-stranded, positive-sense RNA virus classified in the family Hepeviridae and encompasses four known Genotypes (1–4), at least two new putative genotypes of mammalian HEV, and one floating genus of avian HEV. Genotypes 1 and 2 HEVs only affect humans, while Genotypes 3 and 4 are zoonotic and responsible for sporadic and autochthonous infections in both humans and several other animal species worldwide. HEV has an ever-expanding host range and has been identified in numerous animal species. Swine serve as a reservoir species for HEV transmission to humans; however, it is likely that other animal species may also act as reservoirs. HEV poses an important public health concern with cases of the disease definitively linked to handling of infected pigs, consumption of raw and undercooked animal meats, and animal manure contamination of drinking or irrigation water. Infectious HEV has been identified in numerous sources of concern including animal feces, sewage water, inadequately-treated water, contaminated shellfish and produce, as well as animal meats. Many aspects of HEV pathogenesis, replication, and immunological responses remain unknown, as HEV is an extremely understudied but important human pathogen. This article reviews the current understanding of HEV transmission routes with emphasis on food and environmental sources and the prevalence of HEV in animal species with zoonotic potential in humans.

Description: The slow movement of active deep-seated slope gravitational deformations (DSGSDs) and deep-seated rockslides can cause damage to structures and infrastructures. We use Permanent Scatterers Synthetic Aperture Radar Interferometry (PSInSAR™) displacement rate data for the analysis of DSGSD/rockslide activity and kinematics and for the analysis of damage to buildings. We surveyed the degree of damage to buildings directly in the field, and we tried to correlate it with the superficial displacement rate obtained by the PSInSAR™ technique at seven sites. Overall, we observe that the degree of damage increases with increasing displacement rate, but this trend shows a large dispersion that can be due to different causes, including: the uncertainty in the attribution of the degree of damage for buildings presenting wall coatings; the complexity of the deformation for large phenomena with different materials and subjected to differential behavior within the displaced mass; the absence of differential superficial movements in buildings, due to the large size of the investigated phenomena; and the different types of buildings and their position along the slope or relative to landslide portions.

Description: Proteobacteria produce N-acylhomoserine lactones as signaling molecules, which will bind to their cognate receptor and activate quorum sensing-mediated phenotypes in a population-dependent manner. Although quorum sensing signaling molecules can be degraded by bacteria or fungi, there is no reported work on the degradation of such molecules by basidiomycetous yeast. By using a minimal growth medium containing N-3-oxohexanoylhomoserine lactone as the sole source of carbon, a wetland water sample from Malaysia was enriched for microbial strains that can degrade N-acylhomoserine lactones, and consequently, a basidiomycetous yeast strain WW1C was isolated. Morphological phenotype and molecular analyses confirmed that WW1C was a strain of Trichosporon loubieri. We showed that WW1C degraded AHLs with N-acyl side chains ranging from 4 to 10 carbons in length, with or without oxo group substitutions at the C3 position. Re-lactonisation bioassays revealed that WW1C degraded AHLs via a lactonase activity. To the best of our knowledge, this is the first report of degradation of N-acyl-homoserine lactones and utilization of N-3-oxohexanoylhomoserine as carbon and nitrogen source for growth by basidiomycetous yeast from tropical wetland water; and the degradation of bacterial quorum sensing molecules by an eukaryotic yeast.

Description: This paper presents a bio-inspired networking strategy to support the cooperation between static sensors on the ground and mobile sensors in the air to perform surveillance missions in large areas. The goal of the proposal is to provide low overhead in the communication among sensor nodes, while allocating the mobile sensors to perform sensing activities requested by the static ones. Simulations have shown that the strategy is efficient in maintaining low overhead and achieving the desired coordination.

Description: In the face recognition field, principal component analysis is essential to the reduction of the image dimension. In spite of frequent use of this analysis, it is commonly believed that the basis faces with large eigenvalues are chosen as the best subset in the nearest neighbor classifiers. We propose an alternative that can predict the classification error during the training steps and find the useful basis faces for the similarity metrics of the classical pattern algorithms. In addition, we also show the need for the eye-aligned dataset to have the pure face. The experiments using face images verify that our method reduces the negative effect on the misaligned face images and decreases the weights of the useful basis faces in order to improve the classification accuracy.

Description: Automatic detection of pig wasting diseases is an important issue in the management of group-housed pigs. Further, respiratory diseases are one of the main causes of mortality among pigs and loss of productivity in intensive pig farming. In this study, we propose an efficient data mining solution for the detection and recognition of pig wasting diseases using sound data in audio surveillance systems. In this method, we extract the Mel Frequency Cepstrum Coefficients (MFCC) from sound data with an automatic pig sound acquisition process, and use a hierarchical two-level structure: the Support Vector Data Description (SVDD) and the Sparse Representation Classifier (SRC) as an early anomaly detector and a respiratory disease classifier, respectively. Our experimental results show that this new method can be used to detect pig wasting diseases both economically (even a cheap microphone can be used) and accurately (94% detection and 91% classification accuracy), either as a standalone solution or to complement known methods to obtain a more accurate solution.

Description: Migrant remittances are increasingly seen as a potential form of development in the global South, but the impact of international migration on sending regions is far from straightforward. In this article, I analyze migrant communities of origin in rural Bolivia as dynamic places that are constantly reproduced through connections with other places. I document the movement of migrant practices between Washington D.C. and Cochabamba and the influence of monetary and non-monetary flows on Bolivian cultural practices, politics, and development. I demonstrate how hometown associations and returning migrants have transferred organizational practices and political ideas about development from the United States to rural Bolivia. In addition, I explore migration’s role in struggles over belonging in Cochabamba, focusing on the efforts by migrants in Washington D.C. to stake their claim through transnational houses and collective remittance projects and on recent internal migration from other regions in Bolivia. Finally, I assess the sustainability of migrant-led development in Cochabamba. Although collaboration with migrants can strengthen the local state by providing more resources, it conditions the type of development that can take place and has yet to provide adequate opportunities for returning migrants or young people in rural Bolivia.

Description: Discussions on how to define, design, and implement sustainable development goals (SDG) have taken center stage in the United Nations since the Rio+20 summit. Energy is one of the issues that enjoyed consensus, before and after Rio, as an important area for SDGs to address. Many proposals have been put forward on how SDGs should be formulated and what areas they should cover, but there have been few attempts to develop a generic integrated framework within which diverse areas can be accommodated and treated in a coherent way. The purpose of this paper is to develop such a framework for SDGs and to demonstrate its application by elaborating specific target areas for the energy sector. Based on a review and integration of global debates around SDG and energy, the framework puts human wellbeing at the center of the agenda, with the supporting resource base and global public goods forming additional tiers. A complementary set of enabling goals is suggested with four layers: capacity & knowledge, governance & institutions, public policy, and investment & finance. An energy SDG is elaborated to illustrate the application of the framework. The illustrative SDG architecture for energy includes eight target areas: basic energy access, energy for economic development, sufficiency, renewable supply, efficiency, infrastructure, greenhouse gas emissions and security. These target areas are relevant for energy for all countries, but depending on national circumstances such as levels of development, the relative emphasis will be different between countries, and over time.

Description: A survey of wastewater treatment facilities in the Federated States of Micronesia revealed a lack of fully functional treatment systems and conditions that potentially could lead to adverse environmental impacts and public health concerns. Due to inadequate facilities, the amount and composition of wastewater entering the plants as well as the degree of treatment being achieved is largely unknown. In some cases raw sewage is being discharged directly into the ocean and waste sludge is regularly taken by local residents for agricultural purposes without adequate treatment. In addition, the need to establish best management practices for placement and maintenance of septic tanks is urgent. Furthermore, development of eco-friendly solutions is needed to more effectively treat wastewater from industrial and agricultural sources in an effort to abate current pollution problems. Comparisons of treatment methods being used and problems encountered at different locations in the islands would provide valuable information to aid in the development of sustainable treatment practices throughout Micronesia.

Description: Automated methods of real-time, unobtrusive, human ambulation, activity, and wellness monitoring and data analysis using various algorithmic techniques have been subjects of intense research. The general aim is to devise effective means of addressing the demands of assisted living, rehabilitation, and clinical observation and assessment through sensor-based monitoring. The research studies have resulted in a large amount of literature. This paper presents a holistic articulation of the research studies and offers comprehensive insights along four main axes: distribution of existing studies; monitoring device framework and sensor types; data collection, processing and analysis; and applications, limitations and challenges. The aim is to present a systematic and most complete study of literature in the area in order to identify research gaps and prioritize future research directions.

Description: The purpose of this study was to examine the role and visibility of disabled people in the discourses of various global policy processes related to sustainable development and the Post-2015 development agenda. This article makes several recommendations for strengthening the role of disabled people in these discourses. The research addresses the question of how the disability community and sustainable development community relate to each other in these discourses. This study provides quantitative and qualitative data on three aspects of the relationship. One set of data highlights who is seen as a stakeholder in general and the visibility of disabled people in the social sustainability, sustainable consumption, Rio+20 and Post-2015 development agenda proposals discourses and what participants of the online consultation for a disability inclusive development agenda towards 2015 and beyond had to say about the issues of visibility of disabled people in development discourses. A second set of data illuminates the attitudes towards disabled people evident in the SD discourses including through the eyes of the participant of the online consultation for a disability inclusive development agenda towards 2015 and beyond. The final set of data compares the goals and actions seen as desirable for the advancement of SD evident in the SD literature covered and the online consultation for a disability inclusive development agenda towards 2015 and beyond. This study interpreted the data through a disability studies lens. The study found that disabled people were barely visible to invisible in the SD literature covered, that the goals and actions proposed in the SD discourses are of high relevance to disabled people but that these discussions have generally not been explicitly linked to disabled people. It found further that disabled people have clear ideas why they are invisible, what the problems with development policies are and what needs to happen to rectify the problems. It found also that there was a lack of visibility of various SD areas and goals within the disability discourse. This paper provides empirical data that can be used to further the goal of mainstreaming of disabled people into the SD and Post-2015 development discourses as asked for in various high-level UN documents. However, we posit that the utility of our paper goes beyond the disability angle. Our quantitative data also highlights other forms of social group visibility unevenness in the literature and as such, we argue that the data we present in this paper is also of use for other stakeholders such as youth, women and indigenous people and also for NGOs and policy makers.

Description: The aim of this study is to determine the impact upon dissolved organic matter (DOM) and removal of disinfection by-product (DBP) precursors of adding an ozone-biological activated carbon (O3-BAC) process after the conventional treatment process (CTP) using water from the Huangpu River in Shanghai, east China. Several metrics, including size fractionation, dissolved organic carbon (DOC) and trihalomethane formation potential (THMFP), were employed to accomplish this goal. In the raw water collected from the Huangpu River, the low molecular weight (MW) molecules (MW 〈3 kDa) were absolutely dominant in DOM, accounting for more than 55% of total DOC, and the DOM resulted in a high THMFP level of 472.91 ± 4.63 µg/L after an excessive chlorination. The CTP reduced high MW molecules (MW >10 kDa) by 61% and the low MW molecules (MW 〈3 kDa) by only 8%. The O3-BAC presented an accumulated DOC removal efficiency of approximately 50%, in particular, showing a high degree of the removal effectiveness of low MW molecules. Samplings from the CTP, ozone and BAC were subjected to excessive chlorination to determine the THMFP, and the measured concentrations were 211.89 ± 4.58 µg/L, 169.52 ± 4.55 µg/L, and 124.42 ± 4.27 µg/L, respectively. Therefore, coupled with the THMFP removal rate of 74%, the addition of the O3-BAC process after an existing CTP improved the water quality of the effluent, particularly, in terms of the improved reduction in the precursors of DBPs.

Description: Traditional flood control systems always have a conflict with natural ones, i.e., rivers in cities are usually straight and smooth, whereas natural ones are according to ecological mechanisms. Social and economic developments in the modern world require a new system combining ecological needs and traditional flood control system. Ecological flood control systems were put forward and defined as flood control systems with full consideration of ecological demands for sustainable development. In such systems, four aspects are promoted: connectivity of water system, landscapes of river and lakes, mobility of water bodies, and safety of flood control. In Phoenix Island, Huzhou, needs for ecological flood controls were analyzed from the four aspects above. The Water system layout was adjusted with the water surface ratio, which is the ratio of water surface area (including rivers, lakes, and other water bodies) to the total drainage area, and connectivity as controlling indicators. The designed water levels provided references for landscape plant selection. Mobility of the adjusted water system was analyzed, including flow direction and residence time. On the bases mentioned above, ecological flood control projects were planned with comprehensive consideration of the ecological requirements. The case study indicates that ecological needs can be integrated with flood control to develop ecological flood control systems that do not only prevent floods but also retain the ecological functions of water bodies.

Description: Unmanaged forests are remnants of natural ecosystems that provide a basis for close-to-nature silvicultural research and applications. These forests have high amounts of dead wood, and although this material is being increasingly studied, the diversity of dead wood in terms of different diameters, decay stages, and spatial distribution patterns is as important as its volume for understanding forest dynamics. Here, we study natural forests in northern Iran to investigate the spatial distribution, decay stages, and volume of dead wood in unmanaged temperate forests at different developmental stages. Three stem-mapped sampling plots (100 m × 100 m) were established in uneven-aged stands dominated by Caspian beech (Fagus orientalis Lispsky). The total dead wood ranged from 37 to 119 m2 ha−1. Our results imply a spatial distribution shift from aggregation to randomness for dead trees in Caspian beech forest succession. We detected significant spatial interactions (attraction) between living and dead trees at short to medium spatial scales (1–20 m) in the plot with the earlier successional stage, suggesting that intra-specific competition is a prevailing force causing tree mortality at the stem-exclusion phase. By contrast, as trees become dominant with the mortality of other trees, the random tree-mortality pattern prevails. The spatial distribution and volume of dead wood may serve as a management target in near-to-natural Caspian beech forest. On the basis of our results, conservation-oriented management strategies should take into account the increasing amount of dead wood, particularly of large diameter in a late stage of decay.

Description: To understand the impact of drinking and driving laws on drinking and driving fatality rates, this study explored the different effects these laws have on areas with varying severity rates for drinking and driving. Unlike previous studies, this study employed quantile regression analysis. Empirical results showed that policies based on local conditions must be used to effectively reduce drinking and driving fatality rates; that is, different measures should be adopted to target the specific conditions in various regions. For areas with low fatality rates (low quantiles), people’s habits and attitudes toward alcohol should be emphasized instead of transportation safety laws because “preemptive regulations” are more effective. For areas with high fatality rates (or high quantiles), “ex-post regulations” are more effective, and impact these areas approximately 0.01% to 0.05% more than they do areas with low fatality rates.

Description: Understanding mechanisms underlying insects’ host choice and plant susceptibility is important to the study of plant-insect interactions in general, and in the context of plant invasions. This study investigates the oviposition and feeding choices of the specialist weevil Exapion ulicis on the invasive plant species Ulex europaeus, gorse. To do so, we studied the oviposition and feeding preferences of the weevil in choice experiments, using pods and flowers, respectively, from gorses grown in a common garden. The plants used came from regions with different infestation histories: Brittany and Scotland belong to the native range, where the weevil is present, while Reunion and New Zealand belong to the invasive range, where the weevil was not initially introduced with gorse. Results of these experiments suggest that the oviposition choice of E. ulicis females is driven by cues located at the surface of pods and inside them, including pod size and pod seed content. Feeding-choice experiments showed a different pattern of preference compared to oviposition. Taken together with previous studies, our results reveal that E. ulicis uses several traits to choose its host, including whole-plant traits, flower traits and pod traits.

Description: The battery state of charge (SoC), whose estimation is one of the basic functions of battery management system (BMS), is a vital input parameter in the energy management and power distribution control of electric vehicles (EVs). In this paper, two methods based on an extended Kalman filter (EKF) and unscented Kalman filter (UKF), respectively, are proposed to estimate the SoC of a lithium-ion battery used in EVs. The lithium-ion battery is modeled with the Thevenin model and the model parameters are identified based on experimental data and validated with the Beijing Driving Cycle. Then space equations used for SoC estimation are established. The SoC estimation results with EKF and UKF are compared in aspects of accuracy and convergence. It is concluded that the two algorithms both perform well, while the UKF algorithm is much better with a faster convergence ability and a higher accuracy.

Description: Free convection is the most often used method in order to reduce solar load gains on a building with double glazed façades (DGFs). However, depending on the climate factors, the thermal performance of a DGF may not be satisfactory and extra energy costs are required to obtain suitable comfort conditions inside the building. Forced ventilation systems are a feasible alternative to improve the thermal performance of a DGF in Mediterranean climates where large solar gains are a permanent condition throughout the year. In this paper the feasibility of using diverse forced ventilation methods in DGF is evaluated. In addition, an economical comparison between different mechanical ventilation systems was performed in order to demonstrate the viability of DGF forced ventilation. Moreover, an environmental study was carried out to prove the positive energetic balance on cooling loads between free and forced convection in DGF for Mediterranean climates. For this investigation, a CFD model was used to simulate the thermal conditions in a DGF for the different ventilation systems. Results obtained for heat flux, temperature and reductions in solar load gains were analyzed and applied for the economic and environmental research.

Description: This paper presents a hydrogen powered hybrid solid oxide fuel cell-steam turbine (SOFC-ST) system and studies its optimal operating conditions. This type of installation can be very appropriate to complement the intermittent generation of renewable energies, such as wind generation. A dynamic model of an alternative hybrid SOFC-ST configuration that is especially suited to work with hydrogen is developed. The proposed system recuperates the waste heat of the high temperature fuel cell, to feed a bottoming cycle (BC) based on a steam turbine (ST). In order to optimize the behavior and performance of the system, a two-level control structure is proposed. Two controllers have been implemented for the stack temperature and fuel utilization factor. An upper supervisor generates optimal set-points in order to reach a maximal hydrogen efficiency. The simulation results obtained show that the proposed system allows one to reach high efficiencies at rated power levels.

Description: In this work, we introduce a generalization of the differential polynomial neural network utilizing fractional calculus. Fractional calculus is taken in the sense of the Caputo differential operator. It approximates a multi-parametric function with particular polynomials characterizing its functional output as a generalization of input patterns. This method can be employed on data to describe modelling of complex systems. Furthermore, the total information is calculated by using the fractional Poisson process.

Description: Past silvicultural treatments have resulted in the high-grading mixed temperate forests of Québec, Canada. Despite recognition of this issue, the low occurrence of yellow birch (Betula alleghaniensis Britton) within current stands raises questions about the potential of the species to grow and eventually constitute a high-quality forest resource. The objective of this study was to assess this potential using tree characteristics, forest structure and additional site and climatic conditions as predictors. A total of 145 trees were sampled in two areas located in the same bioclimatic zone. Lower-Saguenay-Charlevoix was chosen as an area where a restoration plan could be implemented, whereas Portneuf was selected as a reference. We used nonlinear mixed models to investigate which environmental factors are likely to influence the radial growth and stem quality of yellow birch sample trees. Our results suggest that topographic and climatic conditions, as well as the competitive environment of the trees, are important factors to consider in the evaluation of yellow birch production. Despite the limited occurrence of yellow birch, the potential for growth and quality was high in the Lower-Saguenay-Charlevoix area. For equivalent topographic, climatic, and competitive environment conditions, there was no significant difference in either radial growth or stem quality with Portneuf. We suggest that the economic interest of producing high quality timber should be used to justify the implementation of a restoration strategy in the Lower-Saguenay-Charlevoix area.

Description: Trembling aspen (Populus tremuloides Michx.) is one of the most abundant poplar species in North America; it is native, displays substantial breadth in distribution inhabiting several geographical and climatic ecoregions, is notable for its rapid growth, and is ecologically and economically important. As the demand for raw material continues to increase rapidly, there is a pressing need to improve both tree quality and growth rates via breeding efforts. Hybridization is considered one of the most promising options to simultaneously accelerate these tree characteristics, as it takes advantage of heterosis. Two aspen species showing particular promise for hybridization with trembling aspen are European aspen (P. tremula) and Chinese aspen (P. davidiana) because their native climates are similar to that of P. tremuloides and are also very easy to hybridize. In 2003, aspen clones were planted in Athabasca, Alberta from the following species crosses: open pollinated (OP) P. tremuloides (NN), OP P. davidiana (CC), P. tremula × P. tremula (EE), P. tremula × P. tremuloides (EN), and P. tremuloides × P. davidiana (CN). In November 2010, growth measurements and core samples were taken from seven-year field grown clones. Comparisons of the mean growth and cell wall traits were made between crosses using generalized linear model least squares means tests for stem volume, fiber length, fiber width, coarseness, wood density, microfibril angle, total cell wall carbohydrate and lignin content, and lignin composition. The results clearly indicated that the inter-specific crosses offer a means to breed for more desirable wood characteristics than the intra-specific Populus spp. crosses.

Description: The Chinese government enforced mandatory quarantine for 60 days (from 10 May to 8 July 2009) as a preventative strategy to control the spread of the 2009 H1N1 pandemic. Such a prevention strategy was stricter than other non-pharmaceutical interventions that were carried out in many other countries. We evaluated the effectiveness of the mandatory quarantine and provide suggestions for interventions against possible future influenza pandemics. We selected one city, Beijing, as the analysis target. We reviewed the epidemiologic dynamics of the 2009 H1N1 pandemic and the implementation of quarantine measures in Beijing. The infectious population was simulated under two scenarios (quarantined and not quarantined) using a deterministic Susceptible-Exposed-Infectious-Recovered (SEIR) model. The basic reproduction number R0 was adjusted to match the epidemic wave in Beijing. We found that mandatory quarantine served to postpone the spread of the 2009 H1N1 pandemic in Beijing by one and a half months. If mandatory quarantine was not enforced in Beijing, the infectious population could have reached 1,553 by 21 October, i.e., 5.6 times higher than the observed number. When the cost of quarantine is taken into account, mandatory quarantine was not an economically effective intervention approach against the 2009 H1N1 pandemic. We suggest adopting mitigation methods for an influenza pandemic with low mortality and morbidity.

Description: This study employed a qualitative approach to explore the attitudes and experiences of older people towards using gerontechnology, and to determine the underlying reasons that might account for their use and non-use of gerontechnology. Four focus group discussions and 26 individual interviews were undertaken. Qualitative data were analyzed using NVivo software and were categorized using coding and grounded theory techniques. The result indicated that old people in Hong Kong had an overall positive attitude toward technology. Positive attitudes were most frequently related to enhanced convenience and advanced features. Negative attitudes were most frequently associated with health risks and social problems arising from using technology (e.g., social isolation and addiction). Usage of technology is driven by outcome expectations and social influences, and supported by facilitators, whereas non-use of gerontechnology relates to the personal (e.g., health and functional capacities), technological (e.g., cost and complexity), and environmental barriers experienced. Use of gerontechnology is a synthesis of person, technology, and environment. To encourage non-users to adopt technology, there is a need to remove barriers at personal, technological, and environmental levels.

Description: The authors wish to add the following amendments and corrections to their paper published in IJERPH [1].

Description: Entomological, veterinary, and human surveillance systems for West Nile virus (WNV) infection have been implemented in Italy since the first detection of the virus in 1998. These surveillance activities documented a progressive increase of WNV activity and spread in different regions and the emergence of new WNV lineages and strains. Italy is a paradigmatic example of the complex epidemiology of WNV in Europe, where sporadic cases of WNV infection, clusters, and small outbreaks have been reported in several regions. In addition, different strains of both WNV lineage 1 and lineage 2 have been identified, even co-circulating in the same area.

Description: A 30-year series of global monthly Normalized Difference Vegetation Index (NDVI) imagery derived from the Global Inventory Modeling and Mapping Studies (GIMMS) NDVI3g archive was analyzed for the presence of trends in changing seasonality. Using the Seasonal Trend Analysis (STA) procedure, over half (56.30%) of land surfaces were found to exhibit significant trends. Almost half (46.10%) of the significant trends belonged to three classes of seasonal trends (or changes). Class 1 consisted of areas that experienced a uniform increase in NDVI throughout the year, and was primarily associated with forested areas, particularly broadleaf forests. Class 2 consisted of areas experiencing an increase in the amplitude of the annual seasonal signal whereby increases in NDVI in the green season were balanced by decreases in the brown season. These areas were found primarily in grassland and shrubland regions. Class 3 was found primarily in the Taiga and Tundra biomes and exhibited increases in the annual summer peak in NDVI. While no single attribution of cause could be determined for each of these classes, it was evident that they are primarily found in natural areas (as opposed to anthropogenic land cover conversions) and that they are consistent with climate-related ameliorations of growing conditions during the study period.

Description: The corrosion of reinforcements induced by chloride has resulted to be one of the most frequent causes of their premature damage. Most corrosion sensors were designed to monitor corrosion state in concrete, such as Anode-Ladder-System and Corrowatch System, which are widely used to monitor chloride ingress in marine concrete. However, the monitoring principle of these corrosion sensors is based on the macro-cell test method, so erroneous information may be obtained, especially from concrete under drying or saturated conditions due to concrete resistance taking control in macro-cell corrosion. In this paper, a fast weak polarization method to test corrosion state of reinforcements based on electrochemical polarization dynamics was proposed. Furthermore, a new corrosion sensor for monitoring the corrosion state of concrete cover was developed based on the proposed test method. The sensor was tested in cement mortar, with dry-wet cycle tests to accelerate the chloride ingress rate. The results show that the corrosion sensor can effectively monitor chloride penetration into concrete with little influence of the relative humidity in the concrete. With a reasonable corrosion sensor electrode arrangement, it seems the Ohm-drop effect measured by EIS can be ignored, which makes the tested electrochemical parameters more accurate.

Description: This study describes a wireless laser displacement sensor node that measures displacement as a representative damage index for structural health monitoring (SHM). The proposed measurement system consists of a laser displacement sensor (LDS) and a customized wireless sensor node. Wireless communication is enabled by a sensor node that consists of a sensor module, a code division multiple access (CDMA) communication module, a processor, and a power module. An LDS with a long measurement distance is chosen to increase field applicability. For a wireless sensor node driven by a battery, we use a power control module with a low-power processor, which facilitates switching between the sleep and active modes, thus maximizing the power consumption efficiency during non-measurement and non-transfer periods. The CDMA mode is also used to overcome the limitation of communication distance, which is a challenge for wireless sensor networks and wireless communication. To evaluate the reliability and field applicability of the proposed wireless displacement measurement system, the system is tested onsite to obtain the required vertical displacement measurements during the construction of mega-trusses and an edge truss, which are the primary structural members in a large-scale irregular building currently under construction. The measurement values confirm the validity of the proposed wireless displacement measurement system and its potential for use in safety evaluations of structural elements.

Description: Bacterial cell-to-cell communication (quorum sensing) refers to the regulation of bacterial gene expression in response to changes in microbial population density. Quorum sensing bacteria produce, release and respond to chemical signal molecules called autoinducers. Bacteria use two types of autoinducers, namely autoinducer-1 (AI-1) and autoinducer-2 (AI-2) where the former are N-acylhomoserine lactones and the latter is a product of the luxS gene. Most of the reported literatures show that the majority of oral bacteria use AI-2 for quorum sensing but rarely the AI-1 system. Here we report the isolation of Pseudomonas putida strain T2-2 from the oral cavity. Using high resolution mass spectrometry, it is shown that this isolate produced N-octanoylhomoserine lactone (C8-HSL) and N-dodecanoylhomoserine lactone (C12-HSL) molecules. This is the first report of the finding of quorum sensing of P. putida strain T2-2 isolated from the human tongue surface and their quorum sensing molecules were identified.

Description: Presented here is a slotted-quad-beam structure sensor for the measurement of friction in micro bearings. Stress concentration slots are incorporated into a conventional quad-beam structure to improve the sensitivity of force measurements. The performance comparison between the quad-beam structure sensor and the slotted-quad-beam structure sensor are performed by theoretical modeling and finite element (FE) analysis. A hollow stainless steel probe is attached to the mesa of the sensor chip by a tailor-made organic glass fixture. Concerning the overload protection of the fragile beams, a glass wafer is bonded onto the bottom of sensor chip to limit the displacement of the mesa. The calibration of the packaged device is experimentally performed by a tri-dimensional positioning stage, a precision piezoelectric ceramic and an electronic analytical balance, which indicates its favorable sensitivity and overload protection. To verify the potential of the proposed sensor being applied in micro friction measurement, a measurement platform is established. The output of the sensor reflects the friction of bearing resulting from dry friction and solid lubrication. The results accord with the theoretical modeling and demonstrate that the sensor has the potential application in measuring the micro friction force under stable stage in MEMS machines.

Description: A novel approach for identifying explosive species is reported, using Raman spectroscopy in suspended core optical fibers. Numerical simulations are presented that predict the strength of the observed signal as a function of fiber geometry, with the calculated trends verified experimentally and used to optimize the sensors. This technique is used to identify hydrogen peroxide in water solutions at volumes less than 60 nL and to quantify microgram amounts of material using the solvent’s Raman signature as an internal calibration standard. The same system, without further modifications, is also used to detect 1,4-dinitrobenzene, a model molecule for nitrobenzene-based explosives such as 2,4,6-trinitrotoluene (TNT).

Description: In the bacteria kingdom, quorum sensing (QS) is a cell-to-cell communication that relies on the production of and response to specific signaling molecules. In proteobacteria, N-acylhomoserine lactones (AHLs) are the well-studied signaling molecules. The present study aimed to characterize the production of AHL of a bacterial strain A9 isolated from a Malaysian tropical soil. Strain A9 was identified as Burkholderia sp. using matrix-assisted laser desorption ionization-time-of-flight mass spectrometry and 16S rDNA nucleotide sequence analysis. AHL production by A9 was detected with two biosensors, namely Chromobacterium violaceum CV026 and Escherichia coli [pSB401]. Thin layer chromatography results showed N–hexanoylhomoserine lactone (C6-HSL) and N–octanoylhomoserine lactone (C8-HSL) production. Unequivocal identification of C6-HSL and C8-HSL was achieved by high resolution triple quadrupole liquid chromatography-mass spectrometry analysis. We have demonstrated that Burkholderia sp. strain A9 produces AHLs that are known to be produced by other Burkholderia spp. with CepI/CepR homologs.

Description: In this paper, we present an approach to sense human body capacitance and apply it to recognize lower limb locomotion modes. The proposed wearable sensing system includes sensing bands, a signal processing circuit and a gait event detection module. Experiments on long-term working stability, adaptability to disturbance and locomotion mode recognition are carried out to validate the effectiveness of the proposed approach. Twelve able-bodied subjects are recruited, and eleven normal gait modes are investigated. With an event-dependent linear discriminant analysis classifier and feature selection procedure, four time-domain features are used for pattern recognition and satisfactory recognition accuracies (97:3% ± 0:5%, 97:0% ± 0:4%, 95:6% ± 0:9% and 97:0% ± 0:4% for four phases of one gait cycle respectively) are obtained. The accuracies are comparable with that from electromyography-based systems and inertial-based systems. The results validate the effectiveness of the proposed lower limb capacitive sensing approach in recognizing human normal gaits.

Description: Projector-camera systems are currently used in a wide field of applications, such as 3D reconstruction and augmented reality, and can provide accurate measurements, depending on the configuration and calibration. Frequently, the calibration task is divided into two steps: camera calibration followed by projector calibration. The latter still poses certain problems that are not easy to solve, such as the difficulty in obtaining a set of 2D–3D points to compute the projection matrix between the projector and the world. Existing methods are either not sufficiently accurate or not flexible. We propose an easy and automatic method to calibrate such systems that consists in projecting a calibration pattern and superimposing it automatically on a known printed pattern. The projected pattern is provided by a virtual camera observing a virtual pattern in an OpenGL model. The projector displays what the virtual camera visualizes. Thus, the projected pattern can be controlled and superimposed on the printed one with the aid of visual servoing. Our experimental results compare favorably with those of other methods considering both usability and accuracy.

Description: Daily pollution data (collected in Graz over 16 years and in the Linz over 18 years) were used for time series studies (GAM and case-crossover) on the relationship with daily mortality (overall and specific causes of death). Diagnoses of patients who had been transported to hospitals in Linz were also available on a daily basis from eight years for time series analyses of cardiopulmonary emergencies. Increases in air pollutant levels over several days were followed by increases in mortality and the observed effects increased with the length of the exposure window considered, up to a maximum of 15 days. These mortality changes in Graz and Linz showed similar patterns like the ones found before in Vienna. A significant association of mortality could be demonstrated with NO2, PM2.5 and PM10 even in summer, when concentrations are lower and mainly related to motor traffic. Cardiorespiratory ambulance transports increased with NO2/PM2.5/PM10 by 2.0/6.1/1.7% per 10 µg/m³ on the same day. Monitoring of NO2 (related to motor traffic) and fine particulates at urban background stations predicts acute effects on cardiopulmonary emergencies and extended effects on cardiopulmonary mortality. Both components of urban air pollution are indicators of acute cardiopulmonary health risks, which need to be monitored and reduced, even below current standards.

Description: The world-wide sensor web has become a very useful technique for monitoring the physical world at spatial and temporal scales that were previously impossible. Yet we believe that the full potential of sensor web has thus far not been revealed. In order to harvest the world-wide sensor web’s full potential, a geospatial cyberinfrastructure is needed to store, process, and deliver large amount of sensor data collected worldwide. In this paper, we first define the issue of the sensor web long tail followed by our view of the world-wide sensor web architecture. Then, we introduce the Geospatial Cyberinfrastructure for Environmental Sensing (GeoCENS) architecture and explain each of its components. Finally, with demonstration of three real-world powered-by-GeoCENS sensor web applications, we believe that the GeoCENS architecture can successfully address the sensor web long tail issue and consequently realize the world-wide sensor web vision.

Description: We present a threaded parallel adaptation of a state-of-the-art maximum clique algorithm for dense, computationally challenging graphs. We show that near-linear speedups are achievable in practice and that superlinear speedups are common. We include results for several previously unsolved benchmark problems.

Description: The stable marriage (SM) problem has a wide variety of practical applications, ranging from matching resident doctors to hospitals, to matching students to schools or, more generally, to any two-sided market. In the classical formulation, n men and n women express their preferences (via a strict total order) over the members of the other sex. Solving an SM problem means finding a stable marriage where stability is an envy-free notion: no man and woman who are not married to each other would both prefer each other to their partners or to being single. We consider both the classical stable marriage problem and one of its useful variations (denoted SMTI (Stable Marriage with Ties and Incomplete lists)) where the men and women express their preferences in the form of an incomplete preference list with ties over a subset of the members of the other sex. Matchings are permitted only with people who appear in these preference lists, and we try to find a stable matching that marries as many people as possible. Whilst the SM problem is polynomial to solve, the SMTI problem is NP-hard. We propose to tackle both problems via a local search approach, which exploits properties of the problems to reduce the size of the neighborhood and to make local moves efficiently. We empirically evaluate our algorithm for SM problems by measuring its runtime behavior and its ability to sample the lattice of all possible stable marriages. We evaluate our algorithm for SMTI problems in terms of both its runtime behavior and its ability to find a maximum cardinality stable marriage. Experimental results suggest that for SM problems, the number of steps of our algorithm grows only as O(n log(n)), and that it samples very well the set of all stable marriages. It is thus a fair and efficient approach to generate stable marriages. Furthermore, our approach for SMTI problems is able to solve large problems, quickly returning stable matchings of large and often optimal size, despite the NP-hardness of this problem.

Description: On 16 January 2013, all Boeing 787 Dreamliners were indefinitely grounded due to lithium-ion battery failures that had occurred in two planes. Subsequent investigations into the battery failures released through the National Transportation Safety Board (NTSB) factual report, the March 15th Boeing press conference in Japan, and the NTSB hearings in Washington D.C., never identified the root causes of the failures—a major concern for ensuring safety and meeting reliability expectations. This paper discusses the challenges to lithium-ion battery qualification, reliability assessment, and safety in light of the Boeing 787 battery failures. New assessment methods and control techniques that can improve battery reliability and safety in avionic systems are then presented.

Description: Measurement of the active, reactive, and apparent power is one of the most fundamental tasks of smart meters in energy systems. Recently, a number of studies have employed the discrete wavelet transform (DWT) for power measurement in smart meters. The most common way to implement DWT is the pyramid algorithm; however, this is not feasible for practical DWT computation because it requires either a log N cascaded filter or O (N) word size memory storage for an input signal of the N-point. Both solutions are too expensive for practical applications of smart meters. It is proposed that the recursive pyramid algorithm is more suitable for smart meter implementation because it requires only word size storage of L × Log (N-L), where L is the length of filter. We also investigated the effect of varying different system parameters, such as the sampling rate, dc offset, phase offset, linearity error in current and voltage sensors, analog to digital converter resolution, and number of harmonics in a non-sinusoidal system, on the reactive energy measurement using DWT. The error analysis is depicted in the form of the absolute difference between the measured and the true value of the reactive energy.

Description: Impact detection in aeronautical structures allows predicting their future reliability and performance. An impact can produce microscopic fissures that could evolve into fractures or even the total collapse of the structure, so it is important to know the location and severity of each impact. For this purpose, optical fibers with Bragg gratings are used to analyze each impact and the vibrations generated by them. In this paper it is proven that optical fibers with Bragg gratings can be used to detect impacts, and also that a high-frequency interrogator is necessary to collect valuable information about the impacts. The use of two interrogators constitutes the main novelty of this paper.

Description: The Rational Function Model (RFM) has been widely used as an alternative to rigorous sensor models of high-resolution optical imagery in photogrammetry and remote sensing geometric processing. However, not much work has been done to evaluate the applicability of the RF model for Synthetic Aperture Radar (SAR) image processing. This paper investigates how to generate a Rational Polynomial Coefficient (RPC) for high-resolution TerraSAR-X imagery using an independent approach. The experimental results demonstrate that the RFM obtained using the independent approach fits the Range-Doppler physical sensor model with an accuracy of greater than 10−3 pixel. Because independent RPCs indicate absolute errors in geolocation, two methods can be used to improve the geometric accuracy of the RFM. In the first method, Ground Control Points (GCPs) are used to update SAR sensor orientation parameters, and the RPCs are calculated using the updated parameters. Our experiment demonstrates that by using three control points in the corners of the image, an accuracy of 0.69 pixels in range and 0.88 pixels in the azimuth direction is achieved. For the second method, we tested the use of an affine model for refining RPCs. In this case, by applying four GCPs in the corners of the image, the accuracy reached 0.75 pixels in range and 0.82 pixels in the azimuth direction.