ALBERT

Description: In order to better understand the role of fluids during subduction and subsequent exhumation, we have investigated whole-rock and mineral chemistry (major and trace elements) and Li, B as well as O, Sr, Nd, Pb isotopes on selected continuous drill-core profiles through contrasting lithological boundaries from the Chinese Continental Scientific Drilling Program (CCSD) in Sulu, China. Four carefully selected sample sets have been chosen to investigate geochemical changes as a result of fluid mobilization during dehydration, peak metamorphism, and exhumation of deeply subducted continental crust. Our data reveal that while O and Sr-Nd-Pb isotopic compositions remain more or less unchanged, significant Li and/or B isotope fractionations occur between different lithologies that are in close contact during various metamorphic stages. Samples that are supposed to represent prograde dehydration as indicated by veins formed at high pressures (HP) are characterized by element patterns of highly fluid-mobile elements in the veins that are complementary to those of the host eclogite. A second sample set represents a UHP metamorphic crustal eclogite that is separated from a garnet peridotite by a thin transitional interface. Garnet peridotite and eclogite are characterized by a 〉10% difference in MgO, which, together with the presence of abundant hydroxyl-bearing minerals and compositionally different clinopyroxene grains demonstrate that both rocks have been derived from different sources that have been tectonically juxtaposed during subduction, and that hydrous silicate-rich fluids have been added from the subducting slab to the mantle. Two additional sample sets, comprising retrograde amphibolite and relatively fresh eclogite, demonstrate that besides external fluids, internal fluids can be responsible for the formation of amphibolite. Li and B concentrations and isotopic compositions point to losses and isotopic fractionation during progressive dehydration. On the other hand, fluids with isotopically heavier Li and B are added during retrogression. On a small scale, mantle-derived rocks may be significantly metasomatized by fluids derived from the subducted slab. Our study indicates that during high-grade metamorphism, Li and B may show different patterns of enrichment and of isotopic fractionation.

Description: The Itajaí Basin located in the southern border of the Luís Alves Microplate is considered as a peripheral foreland basin related to the Dom Feliciano Belt. It presents an excellent record of the Ediacaran period, and its upper parts display the best Brazilian example of Precambrian turbiditic deposits. The basal succession of Itajaí Group is represented by sandstones and conglomerates (Baú Formation) deposited in alluvial and deltaic-fan systems. The marine upper sequences correspond to the Ribeirão Carvalho (channelized and non-channelized proximal silty-argillaceous rhythmic turbidites), Ribeirão Neisse (arkosic sandstones and siltites), and Ribeirão do Bode (distal silty turbidites) formations. The Apiúna Formation felsic volcanic rocks crosscut the sedimentary succession. The Cambrian Subida leucosyenogranite represents the last felsic magmatic activity to affect the Itajaí Basin. The Brusque Group and the Florianópolis Batholith are proposed as source areas for the sediments of the upper sequence. For the lower continental units the source areas are the Santa Catarina, São Miguel and Camboriú complexes. The lack of any oceanic crust in the Itajaí Basin suggests that the marine units were deposited in a restricted, internal sea. The sedimentation started around 600 Ma and ended before 560 Ma as indicated by the emplacement of rhyolitic domes. The Itajaí Basin is temporally and tectonically correlated with the Camaquã Basin in Rio Grande do Sul and the Arroyo del Soldado/Piriápolis Basin in Uruguay. It also has several tectono-sedimentary characteristics in common with the African-equivalent Nama Basin.

Description: Most studies dealing with material properties of sandstones are based on a small data set. The present study utilizes petrographical and petrophysical data from 22 selected sandstones and ~300 sandstones from the literature to estimate/predict the material and weathering behaviour of characteristic sandstones. Composition and fabric properties were determined from detailed thin section analyses. Statistical methods applied consist of data distributions with whisker plots and linear regression with confidence regions for the petrophysical and weathering properties. To identify similarities between individual sandstones and to define groups of specific sandstone types, principal component and cluster analyses were applied. The results confirm an interaction between the composition, depositional environment, stratigraphic association and diagenesis, which leads to a particular material behaviour of sandstones. Three different types of pore radii distributions are observed, whereby each is derived from different pore space modifications during diagenesis and is associated with specific sandstone types: (1) bimodal with a maximum in capillary and micropores, (2) unimodal unequal with a maximum in smaller capillary pores and (3) unimodal equable with a maximum in larger capillary pores. Each distribution shows specific dependencies to water absorption, salt loading and hygric dilatation. The strength–porosity relationship shows dependence on the content of unstable lithic fragments, grain contact and type of pore radii distribution, cementation and degree of alteration. Sandstones showing a maximum of capillary pores and micropores (bimodal) exhibit a distinct hygric dilatation and low salt resistance. These sandstones are highly immature sublitharenites–litharenites, characterized by altered unstable rock fragments, which show pointed-elongated grain contacts, and some pseudomatrix. Quartz arenites and sublitharenites–litharenites which are strongly compacted and cemented, show unimodal unequal pore radii distributions, low porosity, high strength and a high salt resistance. The presence of swellable clay minerals in sublitharenites–litharenites leads to a medium to high hygric dilatation, whereas quartz arenites show little hygric dilatation. Sandstones with unimodal equal pore radii distribution mostly belong to weakly compacted and cemented mature quartz arenites. These are characterized by high water absorption and high porosity, low to medium strength and a low salt resistance. The data compiled in this study are used to create a sandstone quality catalogue. Since material properties are dependent on many different parameters of influence, the transition between different lithotypes is fluent.

Description: The lattice-preferred orientation (LPOs) of two late-Variscan granitoids, the Meissen monzonite and the Podlesí dyke granite, were determined from high-resolution time-of-flight neutron diffraction patterns gained at the diffractometer SKAT in Dubna, Russia. The results demonstrate that the method is suitable for the LPO analysis of polyphase, relatively coarse-grained (0.1–6 mm) rocks. The Meissen monzonite has a prominent shape-preferred orientation (SPO) of the non-equidimensional minerals feldspar, mica and amphibole, whereas SPO of the Podlesí granite is unapparent at the hand-specimen scale. The neutron diffraction data revealed distinct LPOs in both granitoids. The LPO of the non-equidimensional minerals feldspar, mica and amphibole developed mainly during magmatic flow. In the case of the Meissen monzonite, the magmatic flow was superimposed by regional shear tectonics, which, however, had no significant effect on the LPOs. In both samples, quartz shows a weak but distinct LPO, which is atypical for plastic deformation and different in the syn-kinematic Meissen monzonite and the post-kinematic Podlesí granite. We suggest that, first of all, the quartz LPO of the Meissen monzonite is the result of oriented growth in an anisotropic stress field. The quartz LPO of the Podlesí granite, which more or less resembles a deformational LPO in the flattening field of the local strain field, developed during magmatic flow, whereby the rhombohedral faces of the quartz crystals adhered to the (010) faces of aligned albite and to the (001) faces of zinnwaldite. Due to shape anisotropy of their attachments, the quartz crystals were passively aligned by magmatic flow. Thus, magmatic flow and oriented crystal growth are the major LPO-forming processes in both granitoids. For the Meissen monzonite, the solid-state flow was too weak to cause significant crystallographic re-orientation of the minerals aligned by magmatic flow. Finally, the significance of our results for the evaluation of the regional tectonic environment during magma emplacement is discussed. The discussion on the regional implications of the more methodologically oriented results provides the basis for future, more regionally aimed studies in view of the fabric characteristics of such plutons and their developing mechanisms.

Description: The Eastern Sierras Pampeanas were structured by three main events: the Ediacaran to early Cambrian (580–510 Ma) Pampean, the late Cambrian–Ordovician (500–440 Ma) Famatinian and the Devonian-Carboniferous (400–350 Ma) Achalian orogenies. Geochronological and Sm–Nd isotopic evidence combined with petrological and structural features allow to speculate for a major rift event (Ediacaran) dividing into two Mesoproterozoic major crustal blocks (source of the Grenvillian age peaks in the metaclastic rocks).This event would be coeval with the development of arc magmatism along the eastern margin of the eastern block. Closure of this eastern margin led to a Cambrian active margin (Sierra Norte arc) along the western margin of the eastern block in which magmatism reworked the same crustal block. Consumption of a ridge segment (input of OIB signature mafic magmas) which controlled granulite-facies metamorphism led to a final collision (Pampean orogeny) with the western Mesoprotrozoic block. Sm–Nd results for the metamorphic basement suggest that the TDM age interval of 1.8–1.7 Ga, which is associated with the less radiogenic values of εNd(540) (−6 to −8), can be considered as the mean average crustal composition for the Eastern Sierras Pampeanas. Increasing metamorphic grade in rocks with similar detrital sources and metamorphic ages like in the Sierras de Córdoba is associated with a younger TDM age and a more positive εNd(540) value. Pampean pre-540 Ma granitoids form two clusters, one with TDM ages between 2.0 and 1.75 Ga and another between 1.6 and 1.5 Ga. Pampean post-540 Ma granitoids exhibit more homogenous TDM ages ranging from 2.0 to 1.75 Ga. Ordovician re-activation of active margin along the western part of the block that collided in the Cambrian led to arc magmatism (Famatinian orogeny) and related ensialic back-arc basin in which high-grade metamorphism is related to mid-crustal felsic plutonism and mafic magmatism with significant contamination of continental crust. TDM values for the Ordovician Famatinian granitoids define a main interval of 1.8–1.6, except for the Ordovician TTG suites of the Sierras de Córdoba, which show younger TDM ages ranging from 1.3 to 1.0 Ga. In Devonian times (Achalian orogeny), a new subduction regime installed west of the Eastern Sierras Pampeanas. Devonian magmatism in the Sierras exhibit process of mixing/assimilation of depleted mantle signature melts and continental crust. Achalian magmatism exhibits more radiogenic εNd(540) values that range between 0.5 and −4 and TDM ages younger than 1.3 Ga. In pre-Devonian times, crustal reworking is dominant, whereas processes during Devonian times involved different geochemical and isotopic signatures that reflect a major input of juvenile magmatism.

Description: The expansion processes that develop in building stones upon changes of moisture content may be an important contributing factor for their deteriorations. Until recently, few data could be found in the literature concerning this parameter and weathering processes. Moreover, the processes that may be responsible for the moisture related expansion of natural building stones are not yet completely understood. To further elucidate this process, extensive mineralogical, petrophysical and fabric investigations were performed on eight German sandstones in order to obtain more information regarding the weathering process and its dependence on the rock fabric. The analysed sandstones show a wide range of pore size distributions and porosities. A positive correlation with the fabric and the pore space can be found for all studied petrophysical parameters. The intensity of the expansion and related swelling pressure cannot be attributed only to the swelling of clay minerals. The investigations suggest that the micropores and the resulting disjoining pressure during wet/dry cycles also play an important role. The results obtained suggest that the mechanism is related to the presence of liquid water within the porous material.

Description: The profitable production of dimension stone mainly depends on the extractable block size. The regularity and volume of the blocks are of critical importance, and are controlled by the three-dimensional pattern of the discontinuity system. Therefore, optimization of block size has to be the aim when quarrying for natural stone. This is mainly connected to the quantification of joints and fractures, i.e., their spacing and orientation. The problem of finding unfractured blocks within arbitrarily oriented and distributed planes can be solved effectively by a numerical algorithm. The main effects of joint orientations on block sizes and shapes will be presented in this article. Quantification of unfractured blocks with the aim of optimization is illustrated by detailed studies on several quarries. The algorithm used in this study can be applied as a powerful tool in the planning of a quarry and the future exploitation of dimension stone. Application of the described approach is demonstrated on practical examples of quarrying natural stones, namely, sandstone, granite, rhyolite, etc. Block quarrying can be optimized by using the new 3D-BlockExpert approach. The quantification of unfractured rock masses is also shown to contribute to a more ecological protection and the sustainable use of natural resources.

Description: Damages to natural building stones induced by the action of frost are considered to be of great importance. Commonly, the frost resistance of building stones is checked by standardised freeze–thaw tests before using. Corresponding tests normally involve 30–50 freeze–thaw action cycles. In order to verify the significance of such measurements, we performed long-term tests on four selected rocks over 1,400 freeze–thaw action cycles. Additionally, numerous petrophysical parameters were analysed to compare the behaviour of rocks in the weathering tests according to the current explanatory models of stress formation by growing ice crystals in the pore space. The long-term tests yield more information about the real frost sensibility of the rocks. A clear deterioration cannot be determined in most cases until 50 weathering cycles have been completed. In the freeze–thaw tests, the samples are also stressed by changing temperature and moisture, indicating that different decay mechanisms can interfere with each other. Thus, thermohygric and moisture expansion are important damage processes.

Description: Owing to its long building history, different types of building stones comprised the construction of the Cologne Cathedral. Severe damage is observed on the different stones, e.g., sandstones, carbonate, and volcanic rocks, especially when the different stone materials neighbor the medieval “Drachenfels trachyte” from the “Siebengebirge”. The question arises, “Is the insufficient compatibility of the implemented building materials causatively related to the strong decay of the Drachenfels trachyte?” The present investigations focus on the petrography and mineralogical composition of eight different stones from the Cologne Cathedral. Petrophysical data, i.e., phase content, moisture and thermal characteristics as well as strength properties are determined and discussed in correlation to each other, showing that not only in terms of lithology great differences exist, but also the petrophysical properties strongly diverge. The ascertained parameters are discussed in view of the deterioration behavior and decay mechanisms of the different stones. To evaluate the compatibility of original, replacement and modern building materials, the properties of the investigated stones are compared to those of Drachenfels trachyte by means of constraints given in the literature. Besides optical properties, petrophysical criteria are also defined as well as strength values. It could be shown that primarily moisture properties, i.e., capillary and sorptive water uptake, water saturation, drying processes and moisture dilatation can be addressed to the deterioration processes.

Description: The range of substrates that the bone-eating marine worm Osedax is able to consume has important implications for its evolutionary history, especially its potential link to the rise of whales. Once considered a whale specialist, recent work indicates that Osedax consumes a wide range of vertebrate remains, including whale soft tissue and the bones of mammals, birds and fishes. Traces resembling those produced by living Osedax have now been recognized for the first time in Oligocene whale teeth and fish bones from deep-water strata of the Makah, Pysht and Lincoln Creek formations in western Washington State, USA. The specimens were acid etched from concretions, and details of the borehole morphology were investigated using micro-computed tomography. Together with previously published Osedax traces from this area, our results show that by Oligocene time Osedax was able to colonize the same range of vertebrate remains that it consumes today and had a similar diversity of root morphologies. This supports the view that a generalist ability to exploit vertebrate bones may be an ancestral trait of Osedax.

Description: The formation of ring faults yields important implications for understanding the structural and dynamic evolution of collapse calderas and potentially associated ash-flow eruptions. Caldera collapse occurred in 2000 at Miyakejima Island (Japan) in response to a lateral intrusion. Based on geophysical data it is inferred that a set of caldera ring faults was propagating upward. To understand the kinematics of ring-fault propagation, linkage, and interaction, we describe new laboratory sand-box experiments that were analyzed through Digital Image Correlation (DIC) and post-processed using 2D strain analysis. The results help us gain a better understanding of the processes occurring during caldera subsidence at Miyakejima. We show that magma chamber evacuation induces strain localization at the lateral chamber margin in the form of a set of reverse faults that sequentially develops and propagates upwards. Then a set of normal faults initiates from tension fractures at the surface, propagating downwards to link with the reverse faults at depth. With increasing amounts of subsidence, interaction between the reverse- and normal-fault segments results in a deactivation of the reverse faults, while displacement becomes focused on the outer normal faults. Modeling results show that the area of faulting and collapse migrates successively outward, as peak displacement transfers from the inner ring faults to later developed outer ring faults. The final structural architecture of the faults bounding the subsiding piston-like block is hence a consequence of the amount of subsidence, in agreement with other caldera structures observed in nature. The experimental simulations provide an analogy to the observations and seismic records of caldera collapse at Miyakejima volcano, but are also applicable to caldera collapse in general.

Description: Forests in lowland Bolivia suffer from severe deforestation caused by different types of agents and land use activities. We identify three major proximate causes of deforestation. The largest share of deforestation is attributable to the expansion of mechanized agriculture, followed by cattle ranching and small-scale agriculture. We utilize a spatially explicit multinomial logit model to analyze the determinants of each of these proximate causes of deforestation between 1992 and 2004. We substantiate the quantitative insights with a qualitative analysis of historical processes that have shaped land use patterns in the Bolivian lowlands to date. Our results suggest that the expansion of mechanized agriculture occurs mainly in response to good access to export markets, fertile soil, and intermediate rainfall conditions. Increases in small-scale agriculture are mainly associated with a humid climate, fertile soil, and proximity to local markets. Forest conversion into pastures for cattle ranching occurs mostly irrespective of environmental determinants and can mainly be explained by access to local markets. Land use restrictions, such as protected areas, seem to prevent the expansion of mechanized agriculture but have little impact on the expansion of small-scale agriculture and cattle ranching. The analysis of future deforestation trends reveals possible hotspots of future expansion for each proximate cause and specifically highlights the possible opening of new frontiers for deforestation due to mechanized agriculture. Whereas the quantitative analysis effectively elucidates the spatial patterns of recent agricultural expansion, the interpretation of long-term historic drivers reveals that the timing and quantity of forest conversion are often triggered by political interventions and historical legacies.

Description: The Mantiqueira Province represents a series of supracrustal segments of the South-American counterpart formed during the Gondwana Supercontinent agglutination. In this crustal domain, the process of escape tectonics played a conspicuous role, generating important NE–N–S-trending lineaments. The oblique component of the motions of the colliding tectonic blocks defined the transpressional character of the main suture zones: Lancinha-Itariri, Cubatão-Arcádia-Areal, Serrinha-Rio Palmital in the Ribeira Belt and Sierra Ballena-Major Gercino in the Dom Feliciano Belt. The process as a whole lasted for ca. 60 Ma, since the initial collision phase until the lateral escape phase predominantly marked by dextral and subordinate sinistral transpressional shear zones. In the Dom Feliciano Belt, southern Brazil and Uruguay, transpressional event at 630–600 Ma is recognized and in the Ribeira Belt, despite less coevally, the transpressional event occurred between 590 and 560 Ma in its northern-central portion and between ca. 625 and 595 Ma in its central-southern portion. The kinematics of several shear zones with simultaneous movement in opposite directions at their terminations is explained by the sinuosity of these lineaments in relation to a predominantly continuous westward compression.

Description: The Sierras Pampeanas in central and north-western Argentina constitute a distinct morphotectonic feature between 27°S and 33°S. The last stage of uplift and deformation in this area are interpreted to be closely related to the Andean flat-slab subduction of the Nazca plate beneath the South American plate. K–Ar fault gouge dating and low-temperature thermochronology along two transects within the Sierra de Comechingones reveal a minimum age for the onset of brittle deformation about 340 Ma, very low exhumation rates since Late Paleozoic time, as well as a total exhumation of about 2.3 km since the Late Cretaceous. New Ar–Ar ages (7.54–1.91 Ma) of volcanic rocks from the San Luis volcanic belt support the eastward propagation of the flat-slab magmatic front, confirming the onset of flat-slab related deformation in this region at 11.2 Ma. Although low-temperature thermochronology does not clearly constrain the signal of the Andean uplift, it is understood that the current structural relief related to the Comechingones range has been achieved after the exhumation of both fault walls (circa 80–70 Ma).

Description: The Palaeogene was the most recent greenhouse period on Earth. Especially for the Late Palaeocene and Early Eocene, several superimposed short-term hyperthermal events have been described, including extremes such as the Palaeocene–Eocene Thermal Maximum. Major faunal and floral turnovers in the marine and terrestrial realms were recorded in association with these events. High-resolution palynological analysis of the early Middle Eocene maar lake sediments at Messel, near Darmstadt, Germany, provides an insight into the dynamics of a climax vegetation during the Middle Eocene greenhouse climate in a time span without significant climatic excursions. Numerical techniques like detrended correspondence analysis and wavelet analysis have been applied to recognize cyclic fluctuations and long-term trends in the vegetation through a time interval of approximately 640 kyr. Based on the numerical zoning of the pollen diagram, three phases in the development of the vegetation may be distinguished. Throughout these phases, the climax vegetation did not change substantially in qualitative composition, but a trend towards noticeably less humid conditions probably in combination with a drop of the water level in the lake may be recognized. A shift in algal population from the freshwater dinoflagellate cyst Messelodinium thielepfeifferae to a dominance of Botryococcus in the uppermost part of the core is interpreted as a response to changes in acidity and nutrient availability within the lake. Time series analyses of pollen assemblages show that variations in the Milankovitch range of eccentricity, obliquity and precession can be distinguished. In addition, fluctuations in the sub-Milankovitch range are indicated. This demonstrates that floral changes during steady depositional conditions in the Middle Eocene of Messel were controlled by orbital forcing.

Description: In the presented case study, ascomycete fungi and green algae on a marble monument were identified by comparisons of the 18S rRNA gene sequences, which were obtained from DNA either from environmental samples or from enrichment cultures. The organisms were found to be responsible for either black or green surface coverings on different areas of the monument surface. Most fungi were related to plant-inhabiting genera, corresponding to a heavy soiling of the marble surface with honeydew. Whereas green algae of the genera Stichococcus, Chloroidium and Apatococcus were found to be dominant in all samples, isolates of two additional genera were recovered only from enrichment cultures. A reference strain of Apatococcus lobatus and an isolate of Prasiolopsis sp. were investigated with respect to putative surface adhesive structures of the cell envelope. The Prasiolopsis cell walls were covered with a thin adhesive exopolysaccharide layer involved in biofilm formation.

Description: Bowing is a well-known phenomenon seen in marbles used as building veneers. This form of rock weathering occurs as a result of external factors such as temperature, humidity, the system for anchoring the marble slabs or the panel dimensions. Under the same external conditions, many factors will determine the degree of deformation including petrography, thermal properties and residual locked stresses. The usual way to solve the problem of bowed marble slabs is to replace them with other materials, such as granites, in which the deformation still exists but is less common. In this study, eight ornamental granites with different mineralogy, grain size, grain shape, porosity and fabric were tested in a laboratory to assess their susceptibility to bowing. Three slabs of granite, each cut with a different orientation, were studied under different conditions of temperature (90 and 120°C) and water saturation (dry and wet) to investigate the influence of these factors together with that of anisotropy. At 90°C, only the granite with the coarsest grain size and low porosity exhibited deformation under wet conditions. At 120°C and wet conditions, three of the granites showed evident signs of bowing. Again, the granite with the coarsest grain size was the most deformed. It was concluded that the wide grain size distribution influences microcracking more than other expected factors, such as the quartz content of the rock. Also, mineral shape-preferred orientation and porosity play an important role in the bowing of the studied granites.

Description: The emplacement of the Mesoproterozoic Götemar Pluton into Paleoproterozoic granitoid host rocks of the Transscandinavian Igneous Belt is re-examined by microfabric analysis, including cathodoluminescence microscopy. Field data on the pluton-host rock system are used to strengthen the model. The Götemar Pluton, situated on the Baltic Shield of SE Sweden, is a horizontally zoned tabular structure that was constructed by the intrusion of successive pulses of magma with different crystal/melt ratios, at an estimated crustal depth of 4–8 km. Initial pluton formation involved magma ascent along a vertical dike, which was arrested at a mechanical discontinuity within the granitoid host rocks; this led to the formation of an initial sill. Subsequent sill stacking and their constant inflation resulted in deformation and reheating of existing magma bodies, which also raised the pluton roof. This multi-stage emplacement scenario is indicated by complex dike relationships and the occurrence of several generations of quartz (Si-metasomatism). The sills were charged by different domains of a heterogeneous magma chamber with varying crystal/melt ratios. Ascent or emplacement of magma with a high crystal/melt ratio is indicated by syn-magmatic deformation of phenocrysts. Complex crystallization fabrics (e.g. oscillatory growth zoning caused by high crystal defect density, overgrowth and replacement features, resorbed and corroded crystal cores, rapakivi structure) are mostly related to processes within the main chamber, that is repeated magma mixing or water influx.

Description: Slates are internationally known as roof and façade-cladding material since prehistoric times. The methods required to mine and manufacture these dimensional stones are relatively simple in comparison to those utilized in granitic dimensional stones. This has led to a worldwide rentable commercialization of slate in the last centuries and also to the development of characteristic cultural landscapes. In Uruguay several slates are mined and used in architecture, especially as façade cladding and floor slabs. The most important slates regarding their production and utilization are the dolomitic slates. These dolomitic slates are associated with the Neoproterozoic thrust and fold belt of the Dom Feliciano belt. Representative samples have been geochemically and petrographically characterized, as well as petrophysically and petromechanically analyzed. The petrophysical and petromechanical properties were investigated in a very systematic way with respect to the new European standards, showing values comparable to those registered for internationally known slates. Detailed structural and deposit analysis were carried out in Uruguay in order to evaluate the dolomitic slate deposits. The slates are linked to calc-silicate strata in a greenschist facies volcano-sedimentary sequence and the deposits are located in the limb of a regional fold, where bedding and cleavage are parallel. The main lithotype is a layered and fine-grained dolomitic slate with a quite diverse palette of colors: light and dark green, gray, dark gray, reddish and black. The mined slate is split into slabs 0.5–2 cm thick. In the past, the average production in Uruguay was around 4,000 tons/year and a historical maximum of 13,000 tons was reached in 1993 (Oyhantçabal et al. in Z dt Ges Geowiss 158(3):417–428, 2007). The oscillations in the regional demand were the cause of several flourishing and decay cycles in the activity, but our investigation shows a considerable volume of indicated resources and therefore a very good potential.

Description: Microstructure‐based finite-element analysis with a microcracking algorithm was used to simulate an actual degradation phenomenon of marble structures, i.e., microcracking. Both microcrack initiation and crack propagation were characterized, as were their dependence on lattice preferred orientation (LPO), grain shape preferred orientation (SPO), grain size, marble composition (calcite and dolomite) and grain‐boundary fracture toughness. Two LPOs were analyzed: a random orientation distribution function and an orientation distribution function with strong directional crystalline texture generated from a March–Dollase distribution. Three SPOs were considered: equiaxed grains; elongated grains and a mixture of equiaxed and elongated grains. Three different grain sizes were considered: fine grains of order 200 μm (only calcitic marble); medium size grains of order 1 mm (calcitic and dolomitic marbles); and large grains of order 2 mm (only dolomitic marble). The fracture surface energy for the grain boundaries, γig, was chosen to be 20 and 40 % of the fracture surface energy of a grain, γxtal, so that both intergranular and transgranular fracture were possible. Studies were performed on these idealized marble microstructures to elucidate the range of microcracking responses. Simulations were performed for both heating and cooling by 50 °C in steps of 1 °C. Microcracking results were correlated with the thermoelastic responses, which are indicators related to degradation. The results indicate that certain combinations of LPO, SPO, grain size, grain‐boundary fracture toughness and marble composition have a significant influence on the thermal-elastic response of marble. Microstructure with the smallest grain size and the highest degree of SPO and LPO had less of a tendency to microcrack. Additionally, with increasing SPO and LPO microcracking becomes more spatially anisotropic. A significant observation for all microstructures was an asymmetry in microcracking upon heating and cooling: more microcracking was observed upon cooling than upon heating. Given an identical microstructure and crystallographic texture, calcite showed larger thermal stresses than dolomite, had an earlier onset of microcracking upon heating and cooling, and a greater microcracked area at a given temperature differential. Thermal expansion coefficients with and without microcracking were also determined.

Description: In Uruguay commercial granite varieties comprise mafic rocks, granitoids, and syenitoids. There is a long tradition in Uruguay, as well as worldwide, of using dimensional stones in architecture and art, specially granitic ones. Some of the present applications of these dimensional stones are as façade cladding, countertops, and outdoor and indoor floor slabs. The color spectrum of the Uruguayan granitic dimensional stones varies from black to light gray, covering a wide variety of red and pink and minor greenish-gray. The décor of these granitic dimensional stones is mainly determined by their fabric, fundamentally the grain size and the color distribution between the different minerals that compose the rocks. In the present research the most important commercial granites were sampled to analyze their petrography and petrophysical properties. A detailed structural analysis has been performed in several deposits, as well as the application of the software 3D Block Expert for modeling the possible raw block size distribution. Other factors controlling the mining viability of the deposits were also studied (e.g., homogeneity/heterogeneity of color and décor) and the possible reserves were calculated.

Description: The old mining city of Guanajuato in middle Mexico preserves one of the most important historical legacies in colonial buildings, the UNESCO declared the city World Heritage Site in 1988. Practically all the colonial constructions were built with natural stones from the neighbourhood, of which stands a greenish to reddish vulcanite, called Loseros Tuff. Although the Loseros Tuff is widely used in historical buildings in the city. It shows significant deterioration and weathering effects, principally in the parts where the tuff shows a coarse grain size. The petrographic, petrophysical, mineralogical and geochemical properties of the Loseros Tuff were analysed in order to determine the causes, effects, behaviour and response to deterioration of this volcanic rock. The results of the investigations suggest that in addition to the parameters like the grain size and the porosity properties, the pore radii distribution is decisive for the effectiveness of porosity and the water transport into the rock. It is recognized that once the liquid water invades the rock the dissolution of the matrix occurs, which is accompanied by a sudden moisture expansion favoured by the newly formed secondary porosity and the high content of expandable clay minerals.

Description: Kurzfassung Die Quantifizierung der Schadstofffrachten an Kontrollebenen ist eine entscheidende Voraussetzung zur Bewertung von Grundwasserschadensfällen und zum Nachweis von Natural Attenuation. Hierzu können zwei verschiedene Erkundungsansätze, die Frachtbestimmung basierend auf der Interpolation von Punktkonzentrationsmessungen sowie Immissionspumpversuche, verwendet werden. Punktkonzentrationsmessungen haben den entscheidenden Nachteil, dass in der Regel nur eine ausreichend große Anzahl sicher stellen kann, dass die gesamte Abstromfahne erfasst wird. Immissionspumpversuche können wiederum relativ hohe Grundwasseraufbereitungs- und Entsorgungskosten verursachen und nur in ausreichend durchlässigen Grundwasserleitern durchgeführt werden. Ein Vergleich der Ergebnisse aus der Anwendung beider Erkundungsansätze kann eine Hilfestellung bei der Konzipierung von Erkundungsmaßnahmen bieten. Daher wurden die Resultate von vier Immissionspumpversuchen mit Messungen in 13, in kurzem Abstand zueinander errichteten, Direct-Push-Messstellen auf dem Gelände eines ehemaligen Gaswerks verglichen. Es konnte festgestellt werden, dass die Vergleichbarkeit der Erkundungsergebnisse je nach Standortsituation stark von der Heterogenität der Verteilung der Schadstoffe im Grundwasserleiter abhängt. Die Studie legt nahe, dass insbesondere bei stark heterogenen Verhältnissen im Grundwasserleiter Immissionspumpversuche bei der Wahl der Erkundungsmethode bevorzugt werden sollten, da die Interpolation von Punktkonzentrationsmessungen selbst im Falle eines relativ engmaschigen Messstellennetzes zu einer großen Erkundungsunsicherheit führen kann.

Description: The quantification of contaminant mass flow rates at control planes is an essential prerequisite for assessing contaminated sites and for providing evidence of natural attenuation. Two different investigation approaches are usually implemented: mass flow estimation based on interpolation of point scale concentration measurements, and integral pumping tests. Point scale concentration measurements have the crucial disadvantage that in general, only a sufficiently dense monitoring network can ensure that the plume is completely covered. On the other hand, integral pumping tests may require expensive groundwater treatment and disposal and are only applicable in sufficiently conductive aquifers. A comparison of results from the application of both approaches can help with respect to the selection of a subsurface investigation method. A former gasworks site was chosen to compare the results of four integral pumping tests and measurements obtained from 13 direct-push-wells, which were installed at a relatively close spacing. The comparison shows that the correlation of the two methods depends strongly on the heterogeneity of the contaminant distribution within the aquifer. The study suggests that especially in the case of heterogeneous settings, integral pumping tests should be chosen for subsurface investigations, as interpolated point scale concentration measurements, even if densely spaced, can still bear a prohibitively high degree of uncertainty.

Description: The degree of weathering in natural stones on buildings and sculptures has been determined for many years in numerous cases by means of ultrasonic measurements. Conclusions concerning the strength of the rock and the type of weathering can thus be drawn. This relationship has not been established for all rock types. Most of the progress utilizing this method has been made in the analysis of marbles, where an increasing degree of weathering shows lower ultrasonic velocities. In the present study, four Carrara marble samples showing similar rock fabrics, but with respect to weathering exhibit considerable differences are investigated. Porosity varies between 0.2 vol. % and ca. 2.4 vol. %, whereby with increasing porosity the pore radii changes as well. Parallel to this the ultrasonic velocities change in dry samples from about 5.5 to 1.6 km/s, respectively. Model calculations reveal that the velocity reduction is caused by cracks with an extremely small aspect ratio of about 0.005 or even less. After a specific loss of strength, however, solution processes can become active, which modify the microcracks and generate an opposite trend. In the process a strong porosity increase correlates to a relatively small velocity reduction. With the presence of water the Vp porosity weathering relationship experiences a considerable modification. Parallel to the reduction of the ultrasonic velocities, it was determined that the mechanical strength (compressive strength, flexural strength, etc.) as well as the static Young’s modulus is reduced almost equally by a progressive advancement of the weathering front. In one case study dealing with tensile strengths, it was clearly documented how tensile cracks develop and propagate in dependence of the rock fabric. The rock mechanical and ultrasonic velocity data were used for stability assessments applied to the marble statuaries from the Schlossbrücke in Berlin. Stability assessments of the sculpture group 4 reveal that some critical parts must be replaced due to safety reasons.

Description: Fabrics of Cambrian sedimentary dykes formed in Proterozoic granites of the Västervik area (Southeast Sweden) evidence repeated opening/filling and mineralisation/cementation events under varying conditions. Diagnostic features include (1) wall-parallel boundaries between epiclastic fillings and (2) early formed dyke sediments that appear as lithoclasts in subsequently formed sedimentary fillings. The psammitic components mostly consist of well-rounded quartz grains related to a coastal environment and fragments from the granitic host rock. Platy calcitic fragments embedded in the epiclastic matrix originally formed as microveins within already-lithified dyke sediments and the adjacent host rock. Convex downward-pointing, internal sagging structures, together with the preferred orientation of compositional boundaries and long axes of grains/rock fragments parallel to the dyke walls, are interpreted as the result of suction-controlled flow of unconsolidated fillings during episodes of downward dyke growth. Pressure solution of quartz grains are evidence of extensional phases with dyke propagation that were interrupted by phases of horizontal compression normal to the dyke walls. The N–S and NE–SW striking sedimentary dykes formed by opening of a pre-existing joint set during NW–SE oriented rifting during the Cambrian.

Description: Moisture expansion in natural building stones is considered one of the most important factors affecting their weathering and deterioration. The processes that may be responsible for the expansion under determinate relative humidity (hygric dilatation) and water-saturated conditions (hydric dilatation) are generally attributed to the presence of swellable clay minerals. In contrast to this assumption, our investigations show that moisture expansion also takes place in volcanic tuff building stones almost free from clay minerals. To provide a deeper understanding of the processes, swelling and deterioration were performed on 14 volcanic tuffs used as important building stones of different ages, compositions and weathering stages from Mexico, Germany and Hungary. The investigations undertaken include extensive chemical, petrophysical and fabric analyses. The samples show a wide range of effective porosity, microporosity, capillary water absorption, moisture expansion, and CEC values. High moisture expansion does not seem to depend on clay mineral content alone. We also observed that there is no significant effect on dilatation if clay minerals are present but only form a thin coat on the outer shell of bigger pores. Moreover, we identified a correlation between microporosity, average pore radius and moisture expansion. The investigations highlight the fact that moisture expansion cannot only be attributed to swellable clay minerals, and suggest that the presence and accumulation of micropores and their average radius and distribution play an important role for non-clay associated swelling intensity, which can most probably be attributed to the disjoining pressure.

Description: Investigation by Raman spectroscopy of samples from different geological settings shows that the occurrence of TiO2 polymorphs other than rutile can hardly be predicted, and furthermore, the occurrence of anatase is more widespread than previously thought. Metamorphic pressure and temperature, together with whole rock chemistry, control the occurrence of anatase, whereas variation of mineral assemblage characteristics and/or fluid occurrence or composition takes influence on anatase trace element characteristics and re-equilibration of relict rutiles. Evaluation of trace element contents obtained by electron microprobe in anatase, brookite, and rutile shows that these vary significantly between the three TiO2 phases. Therefore, on the one hand, an appropriation to source rock type according to Nb and Cr contents, but as well application of thermometry on the basis of Zr contents, would lead to erroneous results if no phase specification is done beforehand. For the elements Cr, V, Fe, and Nb, variation between the polymorphs is systematic and can be used for discrimination on the basis of a linear discriminant analysis. Using phase group means and coefficients of linear discriminants obtained from a compilation of analyses from samples with well-defined phase information together with prior probabilities of groupings from a natural sample compilation, one is able to calculate phase grouping probabilities of any TiO2 analysis containing at least the critical elements Cr, V, Fe, and Nb. An application of this calculation shows that for the appropriation to the phase rutile, a correct-classification rate of 99.5% is obtained. Hence, phase specification by trace elements proves to be a valuable tool besides Raman spectroscopy.

Description: A new U–Pb SHRIMP age of 551 ± 4 Ma on a mylonitic porphyry that intruded into the Sierra Ballena Shear Zone (Southernmost Dom Feliciano Belt, Uruguay) and a review of relevant published data make possible a more refined correlation and reconstruction of Brasiliano/Pan-African transpressional events. Paleogeographic reconstruction, kinematics and timing of events indicate a connection between the shear systems of the Dom Feliciano and Kaoko Belts at 580–550 Ma. Sinistral transpression recorded in shear zones accommodates deformation subsequent to collision between the Congo and Río de la Plata Cratons. The correlation is strengthened by the similarity of magmatic and metamorphic ages in the Coastal Terrane of the Kaoko Belt and the Punta del Este Terrane of the Dom Feliciano Belt. This post-collisional sinistral transpression brought these units near to their final position in Gondwana and explains the different evolution at 550–530 Ma. While in the Kaoko Belt, an extensional episode resulted in exhumation as a consequence of collision in the Damara Belt, in the Dom Feliciano Belt, sinistral transpression occurred associated with the closure of the southern Adamastor Ocean due to Kalahari-Río de la Plata collision.

Description: This study documents the chemical and textural responses of zircon in the Elba igneous complex, with particular reference to the 7- to 7.8-Ma-old Monte Capanne pluton in relation to its coeval volcanic counterpart (Capraia), using BSE imaging and quantitative electron microprobe analyses. The Monte Capanne pluton displays multiple field and geochemical evidence for magma mixing. The samples we have investigated (including monzogranitic, mafic enclave and dyke samples) display similar zircon textures and are associated with an extremely large range of trace and minor element (Hf, Y, HREE, Th, U) compositions, which contrast with relatively simple textures and zoning patterns in zircons from a Capraia dacite. We have used a relatively simple textural classification (patchy zoning, homogenous cores, oscillatory zoning and unzoned zircon) as the basis for discussing the chemical composition and chemical variation within zircons from the Monte Capanne pluton. Based on these data and other works (Dini et al. 2004 in Lithos 78:101–118, 2004) , it is inferred that mixing between metaluminous and peraluminous melts occurred early in the evolution of the Monte Capanne magma chamber. In particular, mixing was responsible for the development of the patchy-zoning texture in the zircon cores, which was associated with reactions between other accessory phases (including monazite, apatite, allanite), which we infer to have significantly affected the Th distribution in zircon. Zircons from the MC pluton displaying “homogeneous cores” have chemical affinities with zircons in the coeval Capraia volcanic system, consistent with the participation of a Capraia-like mantle end-member during mixing. Further zircon growth in the MC pluton produced the oscillatory zoning texture, which records both long-term (crystal fractionation) and transient (recharge with both silicic and mafic magmas) events in a hybrid magma chamber. It is inferred that Hf and the Th/U ratio cannot be used alone to infer magmatic processes due to their dependency on temperature, nor are they a diagnostic feature of xenocrystic grains. This study shows that zircon chemistry coupled with detailed textural analysis can provide a powerful tool to elucidate the complex evolution of a magma system.

Description: The bowing of natural stone panels is especially known for marble slabs. The bowing of granite is mainly known from tombstones in subtropical humid climate. Field inspections in combination with laboratory investigations with respect to the thermal expansion and the bowing potential was performed on two different granitoids (Cezlak granodiorite and Flossenbürg granite) which differ in the composition and rock fabrics. In addition, to describe and explain the effect of bowing of granitoid facade panels, neutron time-of-flight diffraction was applied to determine residual macro- and microstrain. The measurements were combined with investigations of the crystallographic preferred orientation of quartz and biotite. Both samples show a significant bowing as a function of panel thickness and destination temperature. In comparison to marbles the effect of bowing is more pronounced in granitoids at temperatures of 120°C. The bowing as well as the thermal expansion of the Cezlak sample is also anisotropic with respect to the rock fabrics. A quantitative estimate was performed based on the observed textures. The effect of the locked-in stresses may also have a control on the bowing together with the thermal stresses related to the different volume expansion of the rock-forming minerals.

Description: Multi-isotope study including whole-rock Nd–Sr, single zircon Hf, and SIMS δ18O analyses of zircons sheds light on magma sources in the northernmost Arabian–Nubian Shield (ANS) during ~820–570 Ma. Reconnaissance initial Nd and Sr isotope data for the older rocks (~820–740 Ma) reaffirms previous estimates that early crustal evolution in this part of the shield involved some crustal contamination by pre-ANS material. Prominent isotope provinciality is displayed by post-collisional calc-alkaline and alkaline igneous rocks of ~635–570 Ma across a NW-SE transect across basement of the Sinai Peninsula (Egypt) and southern Israel. Silicic rocks of the NW-region are characterized by lower εNd(T)–εHf(T) and higher Sri and δ18O compared with rocks of the SE-region, and the transition between the regions is gradual. Within each region isotope ratios are independent of the extent of magma fractionation, and zircon cores and rims yield similar δ18O values. Comparison with southern segments of the ANS shows that the source for most ~635–570 Ma rocks can be modeled as the isotopically aged lower-intermediate crust in the ANS core (SE-region) and its northern, more contaminated ANS margins (NW-region). Nevertheless, Nd–Sr isotope enrichment of the lithospheric mantle is indicated by some basic magmas of the NW-region displaying the most enriched Nd–Sr isotope compositions. Comparison of Nd and Hf depleted mantle model ages for rocks of the SE-region may indicate that crustal formation events in the ANS geographical core took place at 1.1–1.2 Ga and were followed by crustal differentiation starting at ~0.9 Ga.

Description: Oligoclase and labradorite crystals have been experimentally replaced by albite in an aqueous sodium silicate solution at 600°C and 2 kbars. The replacement is pseudomorphic and is characterised by a sharp chemical interface which progresses through the feldspar while preserving the crystallographic orientation. Reaction rims of albite, up to 50 μm thick, can be readily achieved within 14 days. Re-equilibration of plagioclase in an 18O-enriched sodium- and silica-bearing solution results in oxygen isotope redistribution within the feldspar framework structure. The observed characteristics of the reaction products are similar to naturally albitised plagioclase and are indicative of an interface-coupled dissolution–reprecipitation mechanism. Chemical analyses demonstrate that the albitisation is accompanied by the mobilisation of major, minor and trace elements also including elements such as Al and Ti which are commonly regarded as immobile during hydrothermal alteration. The results contribute to developing our understanding of the close association between large-scale albitisation and secondary ore mineralisation which is common in nature.

Description: The Sierra de San Luis forms the southern tip of the Eastern Sierras Pampeanas in central Argentina. Two narrow belts of low-grade phyllites and quartz arenites, i.e. the San Luis Formation, have accommodated part of the strain-related differential exhumation of the medium- to high-grade metamorphic domains that constitute to the basement complex of the sierra. Eleven phyllite samples were subjected to the K/Ar fine-fraction dating technique. Results are interpreted in relation to the Kübler index of the illites, which indicate epimetamorphic conditions for the majority of the samples. Obtained ages between 330 and 290 Ma cover a period of compressional tectonics in the late Mississippian (Visean/Serpukhovian boundary) followed by the subsidence during the formation of the Paganzo Basin in the provinces of La Rioja and San Luis. These tectonic movements are coincident with the Toco orogeny in northern Chile and southern Bolivia. This suggests that the older K/Ar ages document the compressional stage and that younger ages record the cooling of the basement during the subsequent extensional uplift of the basement.

Description: A review of the lithostratigraphic units in the Río de la Plata Craton and of new and previously published geochronological, isotopic and geophysical data is presented. Sm–Nd TDM model ages between 2.6 and 2.2 Ga characterize the Piedra Alta Terrane of this craton. Crystallization ages between 2.2 and 2.1 Ga for the metamorphic protoliths and 2.1–2.0 Ga for the post-orogenic granitoids indicate juvenile crust, followed by a short period of crustal recycling. Cratonization of this terrane occurred during the late Paleoproterozoic. Younger overprinting is not observed, suggesting it had a thick and strong lithosphere in the Neoproterozoic. A similar scenario is indicated for the Tandilia Belt of Argentina. Sm–Nd TDM model ages for the Nico Pérez Terrane show two main events of crustal growth (3.0–2.6 and 2.3–1.6 Ga). The crystallization ages on zircon ranges between 3.1 and 0.57 Ga, which is evidence for long-lived crustal reworking. The age for cratonization is still uncertain. In the Taquarembó Block, which is considered the prolongation of the Nico Pérez Terrane in southern Brazil, a similar scenario can be observed. These differences together with contrasting geophysical signatures support the redefinition of the Río de la Plata Craton comprising only the Piedra Alta Terrane and the Tandilia Belt. The Sarandí del Yí Shear Zone is regarded as the eastern margin of this Craton.

Description: The volcaniclastic Tepoztlán Formation (TF) represents an important rock record to unravel the early evolution of the Transmexican Volcanic Belt (TMVB). Here, a depositional model together with a chronostratigraphy of this Formation is presented, based on detailed field observations together with new geochronological, paleomagnetic, and petrological data. The TF consists predominantly of deposits from pyroclastic density currents and extensive epiclastic products such as tuffaceous sandstones, conglomerates and breccias, originating from fluvial and mass flow processes, respectively. Within these sediments fall deposits and lavas are sparsely intercalated. The clastic material is almost exclusively of volcanic origin, ranging in composition from andesite to rhyolite. Thick gravity-driven deposits and large-scale alluvial fan environments document the buildup of steep volcanic edifices. K-Ar and Ar-Ar dates, in addition to eight magnetostratigraphic sections and lithological correlations served to construct a chronostratigraphy for the entire Tepoztlán Formation. Correlation of the 577 m composite magnetostratigraphic section with the Cande and Kent (1995) Geomagnetic Polarity Time Scale (GPTS) suggests that this section represents the time intervall 22.8–18.8 Ma (6Bn.1n-5Er; Aquitanian-Burdigalian, Lower Miocene). This correlation implies a deposition of the TF predating the extensive effusive activity in the TMVB at 12 Ma and is therefore interpreted to represent its initial phase with predominantly explosive activity. Additionally, three subdivisions of the TF were established, according to the dominant mode of deposition: (1) the fluvial dominated Malinalco Member (22.8–22.2 Ma), (2) the volcanic dominated San Andrés Member (22.2–21.3 Ma) and (3) the mass flow dominated Tepozteco Member (21.3–18.8 Ma).

Description: The Sierra Ballena Shear Zone (SBSZ) is part of a high-strain transcurrent system that divides the Neoproterozoic Dom Feliciano Belt of South America into two different domains. The basement on both sides of the SBSZ shows a deformation stage preceding that of the transcurrent deformation recognized as a high temperature mylonitic foliation associated with migmatization. Grain boundary migration and fluid-assisted grain boundary diffusion enhanced by partial melting were the main deformation mechanisms associated with this foliation. Age estimate of this episode is 〉658 Ma. The second stage corresponds to the start of transpressional deformation and the nucleation and development of the SBSZ. During this stage, pure shear dominates the deformation, and is characterized by the development of conjugate dextral and sinistral shear zones and the emplacement of syntectonic granites. This event dates to 658–600 Ma based on the age of these intrusions. The third stage was a second transpressional event at about 586 to 〈560 Ma that was associated with the emplacement of porphyry dikes and granites that show evidence of flattening. Deformation in the SBSZ took place, during the late stages, under regional low-grade conditions, as indicated by the metamorphic paragenesis in the supracrustals of the country rocks. Granitic mylonites show plastic deformation of quartz and brittle behavior of feldspar. A transition from magmatic to solid-state microstructures is also frequently observed in syntectonic granites. Mylonitic porphyries and quartz mylonites resulted from the deformation of alkaline porphyries and quartz veins emplaced in the shear zone. Quartz veins reflect the release of silica associated with the breakdown of feldspar to white mica during the evolution of the granitic mylonites to phyllonites, which resulted in shear zone weakening. Quartz microstructures characteristic of the transition between regime 2 and regime 3, grain boundary migration and incipient recrystallization in feldspar indicate deformation under lower amphibolite to upper greenschist conditions (550–400°C). On the other hand, the mylonitic porphyries display evidence of feldspar recrystallization suggesting magmatic or high-T solid-state deformation during cooling of the dikes.

Description: Movement within the Earth’s upper crust is commonly accommodated by faults or shear zones, ranging in scale from micro-displacements to regional tectonic lineaments. Since faults are active on different time scales and can be repeatedly reactivated, their displacement chronology is difficult to reconstruct. This study represents a multi-geochronological approach to unravel the evolution of an intracontinental fault zone locality along the Danube Fault, central Europe. At the investigated fault locality, ancient motion has produced a cataclastic deformation zone in which the cataclastic material was subjected to hydrothermal alteration and K-feldspar was almost completely replaced by illite and other phyllosilicates. Five different geochronological techniques (zircon Pb-evaporation, K–Ar and Rb–Sr illite, apatite fission track and fluorite (U-Th)/He) have been applied to explore the temporal fault activity. The upper time limit for initiation of faulting is constrained by the crystallization age of the primary rock type (known as “Kristallgranit”) at 325 ± 7 Ma, whereas the K–Ar and Rb–Sr ages of two illite fractions 〈2 μm (266–255 Ma) are interpreted to date fluid infiltration events during the final stage of the cataclastic deformation period. During this time, the “Kristallgranit” was already at or near the Earth’s surface as indicated by the sedimentary record and thermal modelling results of apatite fission track data. (U–Th)/He thermochronology of two single fluorite grains from a fluorite–quartz vein within the fault zone yield Cretaceous ages that clearly postdate their Late-Variscan mineralization age. We propose that later reactivation of the fault caused loss of helium in the fluorites. This assertion is supported by geological evidence, i.e. offsets of Jurassic and Cretaceous sediments along the fault and apatite fission track thermal modelling results are consistent with the prevalence of elevated temperatures (50–80°C) in the fault zone during the Cretaceous.

Description: The application of the SHRIMP U/Pb dating technique to zircon and monazite of different rock types of the Sierras de Córdoba provides an important insight into the metamorphic history of the basement domains. Additional constraints on the Pampean metamorphic episode were gained by Pb/Pb stepwise leaching (PbSL) experiments on two titanite and garnet separates. Results indicate that the metamorphic history recorded by Crd-free gneisses (M2) started in the latest Neoproterozoic/earliest Cambrian (553 and 543 Ma) followed by the M4 metamorphism at ~530 Ma that is documented in the diatexites. Zircon ages of 492 Ma in the San Carlos Massif correlate partly with rather low Th/U ratios (〈0.1) suggesting their growth by metamorphic fluids. This age is even younger than the PbSL titanite ages of 506 Ma. It is suggested that the fluid alteration relates to the beginning of the Famatinien metamorphic cycle in the neighbouring Sierra de San Luis and has not affected the titanite ages. The PTt evolution can be correlated with the plate tectonic processes responsible for the formation of the Pampean orogene, i.e., the accretion of the Pampean basement to the Río de La Plata craton (M2) and the later collision of the Western Pampean basement with the Pampean basement.

Description: Indicator kriging (IK) is a spatial interpolation technique aimed at estimating the conditional cumulative distribution function (ccdf) of a variable at an unsampled location. Obtained results form a discrete approximation to this ccdf, and its corresponding discrete probability density function (cpdf) should be a vector, where each component gives the probability of an occurrence of a class. Therefore, this vector must have positive components summing up to one, like in a composition in the simplex. This suggests a simplicial approach to IK, based on the algebraic-geometric structure of this sample space: simplicial IK actually works with log-odds. Interpolated log-odds can afterwards be easily re-expressed as the desired cpdf or ccdf. An alternative but equivalent approach may also be based on log-likelihoods. Both versions of the method avoid by construction all conventional IK standard drawbacks: estimates are always within the (0,1) interval and present no order-relation problems (either with kriging or co-kriging). Even the modeling of indicator structural functions is clarified.

Description: A complete theoretical presentation of the Continuum-mechanical, Anisotropic Flow model, based on an anisotropic Flow Enhancement factor (CAFFE model) is given. The CAFFE model is an application of the theory of mixtures with continuous diversity for the case of large polar ice masses in which induced anisotropy occurs. The anisotropic response of the polycrystalline ice is described by a generalization of Glen’s flow law, based on a scalar anisotropic enhancement factor. The enhancement factor depends on the orientation mass density, which is closely related to the orientation distribution function and describes the distribution of grain orientations (fabric). Fabric evolution is governed by the orientation mass balance, which depends on four distinct effects, interpreted as local rigid body rotation, grain rotation, rotation recrystallization (polygonization) and grain boundary migration (migration recrystallization), respectively. It is proven that the flow law of the CAFFE model is truly anisotropic despite the collinearity between the stress deviator and stretching tensors.

Description: New 40Ar/39Ar and published 14C ages constrain voluminous mafic volcanism of the Kamchatka back-arc to Miocene (3–6 Ma) and Late Pleistocene to Holocene (〈1 Ma) times. Trace elements and isotopic compositions show that older rocks derived from a depleted mantle through subduction fluid-flux melting (〉20%). Younger rocks form in a back arc by lower melting degrees involving enriched mantle components. The arc front and Central Kamchatka Depression are also underlain by plateau lavas and shield volcanoes of Late Pleistocene age. The focus of these voluminous eruptions thus migrated in time and may be the result of a high fluid flux in a setting where the Emperor seamount subducts and the slab steepens during rollback during terrain accretions. The northern termination of Holocene volcanism locates the edge of the subducting Pacific plate below Kamchatka, a “slab-edge-effect” is not observed in the back arc region.

Description: Aspidochirote holothurian ossicles were discovered in Upper Ordovician-aged Öjlemyr cherts from Gotland, Sweden. The well-preserved material allows definitive assignment to the family Synallactidae, a deep-sea sea cucumber group that is distributed worldwide today. The new taxon Tribrachiodemas ordovicicus gen. et sp. nov. is described, representing the oldest member of the Aspidochirotida. The further fossil record of Synallactidae and evolutionary implications are also discussed.

Description: The configurational heat capacity, shear modulus and shear viscosity of a series of Na2O–Fe2O3–Al2O3–SiO2 melts have been determined as a function of composition. A change in composition dependence of each of the physical properties is observed as Na2O/(Na2O + Al2O3) is decreased, and the peralkaline melts become peraluminous and a new charge-balanced Al-structure appears in the melts. Of special interest are the frequency dependent (1 mHz–1 Hz) measurements of the shear modulus. These forced oscillation measurements determine the lifetimes of Si–O bonds and Na–O bonds in the melt. The lifetime of the Al–O bonds could not, however, be resolved from the mechanical spectrum. Therefore, it appears that the lifetime of Al–O bonds in these melts is similar to that of Si–O bonds with the Al–O relaxation peak being subsumed by the Si–O relaxation peak. The appearance of a new Al-structure in the peraluminous melts also cannot be resolved from the mechanical spectra, although a change in elastic shear modulus is determined as a function of composition. The structural shear-relaxation time of some of these melts is not that which is predicted by the Maxwell equation, but up to 1.5 orders of magnitude faster. Although the configurational heat capacity, density and shear modulus of the melts show a change in trend as a function of composition at the boundary between peralkaline and peraluminous, the deviation in relaxation time from the Maxwell equation occurs in the peralkaline regime. The measured relaxation times for both the very peralkaline melts and the peraluminous melts are identical with the calculated Maxwell relaxation time. As the Maxwell equation was created to describe the timescale of flow of a mono-structure material, a deviation from the prediction would indicate that the structure of the melt is too complex to be described by this simple flow equation. One possibility is that Al-rich channels form and then disappear with decreasing Si/Al, and that the flow is dominated by the lifetime of Si–O bonds in the Al-poor peralkaline melts, and by the lifetime of Al–O bonds in the relatively Si-poor peralkaline and peraluminous melts with a complex flow mechanism occurring in the mid-compositions. This anomalous deviation from the calculated relaxation time appears to be independent of the change in structure expected to occur at the peralkaline/peraluminous boundary due to the lack of charge-balancing cations for the Al-tetrahedra.

Description: It is well-known that sediment composition strongly depends on grain size. A number of studies have tried to quantify this relationship focusing on the sand fraction, but only very limited data exists covering wider grain size ranges. Geologists have a clear conceptual model of the relation between grain size and sediment petrograpic composition, typically displayed in evolution diagrams. We chose a classical model covering grain sizes from fine gravel to clay, and distinguishing five types of grains (rock fragments, poly- and mono crystalline quartz, feldspar and mica/clay). A compositional linear process is fitted here to a digitized version of this model, by (i) applying classical regression to the set of all pairwise log-ratios of the 5-part composition against grain size, and (ii) looking for the compositions that best approximate the set of estimated parameters, one acting as slope and one as intercept. The method is useful even in the presence of several missing values. The linear fit suggests that the relative influence of the processes controlling the relationship between grain size and sediment composition is constant along most of the grain size spectrum.

Description: The giant ignimbrites that erupted from the Cerro Galán caldera complex in the southern Puna of the high Andean plateau are considered to be linked to crustal and mantle melting as a consequence of delamination of gravitationally unstable thickened crust and mantle lithosphere over a steepening subduction zone. Major and trace element analyses of Cerro Galán ignimbrites (68–71% SiO2) that include 75 new analyses can be interpreted as reflecting evolution at three crustal levels. AFC modeling and new fractionation corrected δ18O values from quartz (+7.63–8.85‰) are consistent with the ignimbrite magmas being near 50:50 mixtures of enriched mantle (87Sr/86Sr ~ 0.7055) and crustal melts (87Sr/86Sr near 0.715–0.735). Processes at lower crustal levels are predicated on steep heavy REE patterns (Sm/Yb = 4–7), high Sr contents (〉250 ppm) and very low Nb/Ta (9-5) ratios, which are attributed to amphibolite partial melts mixing with fractionating mantle basalts to produce hybrid melts that rise leaving a gravitationally unstable garnet-bearing residue. Processes at mid crustal levels create large negative Eu anomalies (Eu/Eu* = 0.45–0.70) and variable trace element enrichment in a crystallizing mush zone with a temperature near 800–850°C. The mush zone is repeatedly recharged from depth and partially evacuated into upper crustal magma chambers at times of regional contraction. Crystallinity differences in the ignimbrites are attributed to biotite, zoned plagioclase and other antecrysts entering higher level chambers where variable amounts of near-eutectic crystallization occurs at temperatures as low as 680°C just preceding eruption. 40Ar/39Ar single crystal sanidine weighted mean plateau and isochron ages combined with trace element patterns show that the Galán ignimbrite erupted in more than one batch including a ~ 2.13 Ma intracaldera flow and outflows to the west and north at near 2.09 and 2.06 Ma. Episodic delamination of gravitationally unstable lower crust and mantle lithosphere and injection of basaltic magmas, whose changing chemistry reflects their evolution over a steepening subduction zone, could trigger the eruptions of the Cerro Galán ignimbrites.

Description: The construction suitability of a dimension stone depends on its weathering properties along with the petrology and the petrophysical properties. The aim of this study was to evaluate the suitability of the dimension stones from the “Drei Gleichen” area for construction and replacement purposes. In total, six sandstones (Ingersleben, Wachsenburg, Hindfelden, Seeberg, Röhnberg, Gleichenberg; Upper Triassic) as well as two carbonates (Wachsenburg sinter; Quaternary, Wandersleben dolomite; Middle Triassic) were analysed. The results from our laboratory and on-site studies of the dimension stones show that rocks from the same stratigraphic layer, like the sandstones from the upper Triassic, can show major differences in their petrophysical and weathering properties. These differences are attributed to their different diagenesis, resulting, e.g. in varying pore space, water balance and strength properties. The pore size distribution can be divided into four different groups based on their occurring maxima and micropore content. The determined water balance properties as well as moisture expansion and salt attack depend on these groups. Next to this, the mineralogical composition significantly influences the weathering resistance. Sandstones with a high content of altered lithoclasts show a high amount of moisture expansion, low strength and, in consequence, a low weathering resistance against salt attack. Based on the results of the present study, an evaluation of construction suitability could be accomplished. From the analysed sandstones, only the Seebergen sandstone is suitable for construction purposes due to its good availability, good strength properties (high compressive and tensile strength, low softening degree) as well as a low porosity. Furthermore, the Wachsenburg sandstone also shows good petrophysical and petrological properties, but exploitable deposits are too sparse to be of commercial interest. From the carbonates, the Wachsenburg sinter shows very suitable rock parameters, but only sparse outcrops occur, which are not appropriate for mining.

Description: In the Aztec period and in colonial times different natural stones originating in the Valley of Mexico were used for building construction. Stone weathering was investigated onsite at various historical buildings within the old quarter of Mexico City. In this study, different aspects of weathering and deterioration at three significant historical buildings will be presented, the Aztec excavation site Templo Mayor, the Metropolitan Cathedral, and the colonial palace of the dukes of Heras Soto. Petrophysical properties of the main building stones of these structures were investigated like density, porosity, pore radii distribution, water uptake rate and coefficient, thermal and hygric expansion, and the mechanical properties of uniaxial compressive strength. A relationship between single critical property values, according to anisotropy fabric characteristics, and specific weathering forms could be deduced.

Description: The cone-building volcanic activity and subsequent erosion of San Francisco Mountain, AZ, USA, were studied by using high-resolution digital elevation model (DEM) analysis and new 40Ar/39Ar dating. By defining remnants or planèzes of the volcano flanks in DEM-derived images, the original edifice can be reconstructed. We propose a two-cone model with adjacent summit vents which were active in different times. The reconstructed cones were 4,460 and 4,350 m high a.s.l., corresponding to ∼2,160 and 2,050 m relative height, respectively. New 40Ar/39Ar data allow us to decipher the chronological details of the cone-building activity. We dated the Older and Younger Andesites of the volcano that, according to previous mapping, built the stage 2 and stage 3 stratocones, respectively. The new 40Ar/39Ar plateau ages yielded 589–556 ka for the Older and 514–505 ka for the Younger Andesites, supporting their distinct nature with a possible dormant period between. The obtained ages imply an intense final (≤100 ka long) cone-building activity, terminating ∼100 ka earlier than indicated by previous K-Ar ages. Moreover, 40Ar/39Ar dating constrains the formation of the Inner Basin, an elliptical depression in the center of the volcano initially created by flank collapse. A 530 ka age (with a ±58.4 ka 2σ error) for a post-depression dacite suggests that the collapse event is geochronologically indistinguishable from the termination of the andesitic cone-building activity. According to our DEM analysis, the original cone of San Francisco Mountain had a volume of about 80 km3. Of this volume, ∼7.5 km3 was removed by the flank collapse and subsequent glacial erosion, creating the present-day enlarged Inner Basin, and ∼2 km3 was removed from the outer valleys by erosion. Based on volumetric analysis and previous and new radiometric ages, the average long-term eruption rate of San Francisco Mountain was ∼0.2 km3/ka, which is a medium rate for long-lived stratovolcanoes. However, according to the new 40Ar/39Ar dates for the last ≤100 ka period, the final stratovolcanic activity was characterized by a greater ∼0.3 km3/ka rate.

Description: Kurzfassung Auf dem Gelände eines ehemaligen Gaswerks (Testfeld Süd) wurden Immissionspumpversuche (IPVs) zur Quantifizierung der Fracht und der mittleren Konzentration gaswerkstypischer Schadstoffe entlang von drei Kontrollquerschnitten durchgeführt. Die daraus resultierenden Konzentrationsganglinien wurden mithilfe des Inversionsprogramms CSTREAM und eines Strömungs- und Transportmodells des hydraulisch extrem heterogenen Grundwasserleiters numerisch ausgewertet. Die den gesamten Abstrombereich der Verdachtsfläche erfassenden Kontrollquerschnitte ermöglichen Aussagen über die Position und Ausbreitung der Schadstofffahne auf dem Gelände des Testfeldes Süd. Bisherige Auswertungen von IPVs konnten die Verteilung der Schadstofffahne um den IPV-Brunnen für genau drei Fälle berechnen: entweder befindet sich die Fahne links vom Brunnen, rechts davon oder ist symmetrisch um ihn verteilt. Um eine realistischere Vorstellung von der Fahnenposition zu ermöglichen, wurden in dieser Studie zusätzlich Direct-Push-Messstellen entlang einer Kontrollebene installiert. Die in diesen Messstellen gemessenen Konzentrationen wurden zur Konditionierung der numerischen Inversionslösung herangezogen. Die Ergebnisse ermöglichen eine genauere Eingrenzung des Fahnenzentrums sowie des Fahnenrandes, was insbesondere die Erarbeitung angepasster und optimierter Sanierungsstrategien unterstützt.

Description: A series of integral pumping tests (IPTs) were conducted at a former gasworks site to quantify the contaminant mass flux and average concentration in groundwater along three control planes. The resulting concentration-time series were analysed numerically with the help of the inversion code CSTREAM and a flow and transport model representing the highly heterogeneous aquifer. Since the control planes cover the entire downstream width of the potentially contaminated area, they allow conclusions to be drawn about the current location and spread of the contaminant plume. Previous evaluations of integral pumping tests could calculate three scenarios concerning the spread of the plume around the IPT well: (i) the plume is located to the right of the well, (ii) to the left, or (iii) is distributed symmetrically around it. To create a more realistic picture of the plume position, a series of direct-push monitoring wells were installed along one control plane. The concentrations found in these wells were included in the numerical analysis to condition the inversion results, and resulted in a more pronounced plume centre and fringe, which supports the development of optimised remediation strategies.

Description: The Kristallbrocken are a characteristic centimetre- to decimetre-sized, laminated halite fabric type occurring in the Stassfurt Formation in the Zechstein Basin. Up to now, the nature of the Kristallbrocken, i.e. if they are relics of fine-grained, polycrystalline halite beds or clasts of ‘single crystal-layers’, as well as the deformation mechanisms of this halite type, were not clear from the literature. Drill core material from the salt deposit Teutschenthal at the southern rim of the Zechstein Basin now allowed investigating less intensely deformed samples for the first time. The deformational behaviour of these Kristallbrocken ranges from brittle to ductile, which is evidenced by fractured Kristallbrocken on the one hand and weakly bent or even folded Kristallbrocken on the other hand. Local X-ray texture measurements demonstrated that the Kristallbrocken are definitely single crystals and that they can be regarded as relics of formerly larger ‘single crystal-layers’ of up to several dm2 in size. The folded Kristallbrocken clearly display by their single grain texture characteristics that their crystal lattice is bent, which was most likely enabled by a kind of flexural-shear folding, and did not develop after deformation from a fine-grained aggregate by recrystallisation. Due to their monocrystallinity, their originally large size, and the solid inclusions forming the internal lamination, the Kristallbrocken have clearly stronger rheological properties than the surrounding fine- to coarse-grained polycrystalline rock salt, and thus also deform by fracturing.

Description: The northern German Lower Cretaceous Bückeberg Formation yields numerous dinosaur tracksites, some of which have produced material of impressive quality. Stratigraphically, the localities are concentrated in the Obernkirchen Sandstone, a thin subunit within this formation. The Obernkirchen Sandstone represents mainly a sandy barrier to back-barrier and lagoonal setting within a limnic deltaic facies complex, which was deposited during the late Berriasian (Cypridea alta formosa ostracod subzone) in the southeast of the Lower Saxony Basin, northwest Germany. A few tracksites occur more proximally in coeval fluvial deposits. Dinosaur footprint assemblages were left by ornithopods, theropods, sauropods, ankylosaurs, and small, bipedal ornithischians. Other vertebrate tracks are those of turtles and, possibly, crocodilians. Due to the decrease in sandstone quarrying in recent decades, many old tracksites are inaccessible today. Additionally, historical descriptions of the tracks were of highly variable quality and often published in remote and today nearly unobtainable sources. Here we provide a catalogue of 13 tracksites compiled from the literature and some new observations. Of these 13 tracksites, only five are still accessible and currently under study. Descriptions of each locality are provided, with a comprehensive compilation of existing data on lithofacies, stratigraphy, palaeogeography and palaeoecology of the Obernkirchen Sandstone and equivalent strata. A short review of the track-bearing lithofacies assemblage indicates that the outcrop areas have distinctly different facies and environments, and, therefore, track-bearing horizons can only be correlated stratigraphically between adjacent outcrops. For this reason, the identification of a megatracksite in the Obernkirchen Sandstone is currently regarded as premature and uncertain.

Description: The morphologically conspicuous bivalve Oxytoma (Palmoxytoma) cygnipes (Young & Bird, 1822), known for its palaeogeographically bipolar distribution, from a limestone bed in the boundary “Belemniten–Schichten”/Amaltheenton formation, Lower Jurassic, in N Germany is described. The occurrence of this palaeoceanographically significant bivalve points to an influx of cool seawater from the Arctic to the North-German Basin at the base of the Upper Pliensbachian, just before the deposition of the Amaltheenton formation. A review of previously reported occurrences on the NW European Shelf indicates two distinct stratigraphic intervals of occurrence of this taxon: the Rhaetian–Hettangian boundary and the Upper Pliensbachian. Whereas the former interval of occurrence may be related to short-term cooling in the course of the end-Triassic extinction event, the latter is interpreted as reflecting the influx of a cool water current to the eastern part of the NW European Shelf, which continued southwards parallel to the coast of the Bohemian–Vindelician High.

Description: In the present study, the diversity of ascomycete fungi was investigated on two wall areas of the “Burg Gleichen”, Thuringia (Germany), made of various types of sandstones, travertine and Grenzdolomit. From a W-exposed, shaded wall area, free-living ascomycetes (mainly “black fungi”) and green algae could be retrieved from sandstone lithologies. Sandstone from an ESE-exposed area was mainly colonized by lichen ascomycetes and the lichen alga Trebouxia. Both areas share a small number of generalist species, related to the ascomycete black fungi Sarcinomyces petricola, Phaeococcomyces chersonesos and Stichococcus mirabilis. Free-living black fungi were isolated and characterized with respect to cell wall morphology and melanin content. A remarkably rigid melanin layer, incorporated in the cell wall of a Cladosporium isolate is presented in detail.

Description: Microstructure-based finite element simulations were used to study the influence of grain shape fabric and crystal texture on thermoelastic responses related to marble degradation phenomena. Calcite was used as an illustrative example for studying extremes of shape preferred orientation (SPO) in shape fabric and lattice preferred orientation (LPO) in crystal texture. Three SPOs were analyzed: equiaxed grains, elongated grains, and a mixture of equiaxed and elongated grains. Three LPOs were considered: a random orientation distribution function and two degrees of strong directional crystal texture. Finally, the correlation between the direction of the LPO with respect to that of the SPO was examined. Results show that certain combinations of SPO, LPO, and their directional relationship have significant influence on the thermomechanical behavior of marble. For instance, while there is no major dependence of the elastic strain energy density and the maximum principal stress on SPO for randomly textured microstructures, there is a strong synergy between LPO and its directional relationship with respect to the SPO direction. Microcracking precursors, elastic strain energy density, and maximum principal stress, decrease when the crystalline c-axes have fiber texture perpendicular to the SPO direction, but increase significantly when the c-axes have fiber texture parallel to the SPO direction. Moreover, the microstructural variability increases dramatically for these latter configurations. In general, the influence of LPO was as expected, namely, the strain energy density and the maximum principal stress decreased with more crystal texture, apart from for the exception noted above. Spatial variations of these precursors indicated regions in the microstructure with a propensity for microcracking. Unexpectedly, important variables were the microstructural standard deviations of the spatial distributions of the microcracking indicators. These microstructural standard deviations were as large as or larger than the variables themselves. The elastic misfit-strain contributions to the coefficients of thermal expansion were also calculated, but their dependence was as expected.

Description: The present study documents the results of an inter-disciplinary model project that was planned with the aim of developing an innovative winter covering system for marble statuaries located on the Schlossbrücke (Berlin). Such a system would need to fulfil the various requirements for structural stability, aesthetics, climate and practical use. This applied research represents the first complex scientific study of the sustainability of a winter covering system. The study is characterised by the use of complex scientific instruments such as special laboratory analysis and numerical simulation tools. The interaction between the environment and the artefacts in connection with the innovative winter covering structures were studied by extensive climatic monitoring.

Description: Severe stone deterioration is evident at the Cologne cathedral. In particular, the “Drachenfels” trachyte, which was the building material of the medieval construction period, shows significant structural deterioration as well as massive formation of gypsum crusts. The present article investigates crust formation on limestone, sandstone, and volcanic rock from the Cologne cathedral as well as from the Xanten and Altenberg cathedrals. These three buildings, showing varying degrees of deterioration, are located in different areas and exposed to varying industrial, urban, and rural pollution. Thin laminar and black framboidal crusts form on calcareous as well as silicate stone. The lack of a significant intrinsic calcium and sulfur source for the formation of the gypsum crusts on the Drachenfels trachyte indicates major extrinsic environmental impact: a sufficient offer of SOx from pollutant fluxes as well as external calcium sources (e.g., pollution, mortars, neighboring calcite stones). Chemical analyses reveal strong gypsum enrichment within the crusts as well as higher concentrations of lead and other pollutants (arsenic, antimony, bismuth, tin, etc.), which generally can be linked to traffic and industry. The formation of weathering crusts in an industrial environment is clearly distinguishable from that in rural areas. Scanning electron microscopy observations confirm that the total amount of pollution is less at the Altenberg cathedral than at the Cologne and Xanten cathedrals. XRF analyses show that the formation of gypsum occurs in lower amounts at Altenberg. This correlates well with the measured SO2 content and the intensity of the decay at the different locations. Furthermore, the different types of crusts, e.g., framboidal and laminar, can be differentiated and assigned to the different locations. The black weathering crusts on the silicate Drachenfels trachyte contribute to the degradation of the historic building material. They enhance mechanical moisture-related deterioration processes and the decay by chemical corrosion of rock-forming minerals. Although SO2 concentrations in air have shown a strong decrease over the past 30 years, degradation in connection with weathering crusts is still observed. This indicates that not only contemporary or recent emissions, but also past pollutant concentrations have to be considered.

Description: Kurzfassung Im Osten des Thüringer Beckens sind aufgrund der geringen Niederschläge von 585 mm/a die Grundwasserressourcen in den geklüfteten Buntsandsteingrundwasserleitern stark limitiert. Ziel der Untersuchung war es, für dieses Buntsandsteinfließsystem ein numerisches Grundwasserströmungsmodell zu erstellen, um die zukünftige Entwicklung der Grundwasserressourcen auf der Grundlage verschiedener Klimaszenarien prognostizieren zu können. Im vorliegenden Beitrag wurden Grundwasserganglinien mit dem Ziel analysiert, eine Inputfunktion für die Grundwasserneubildung am Grundwasserspiegel abzuleiten, welche ein wichtiger Eingangsparameter bei der numerischen Modellierung ist. Es konnte gezeigt werden, dass die Strömung im Buntsandsteingrundwasserleiter sowohl durch ein kluft- sowie ein matrixdominiertes Strömungsregime charakterisiert ist. Der überwiegende Anteil der Grundwasserneubildung infiltriert rasch durch das Kluftsystem. Dagegen bewirken die geringeren Matrixdurchlässigkeiten in der ungesättigten Zone, in Abhängigkeit vom Flurabstand, eine deutliche Verzögerung der Grundwasserneubildung von bis zu mehreren Jahren.

Description: In the eastern Thuringian Basin, the low precipitation rate of 585 mm/y limits the groundwater resources in the sandstone aquifer system. The aim of this study was to develop a groundwater flow model for the region in order to forecast the impacts of different climate scenarios on the groundwater balance. Since recharge is of high relevance for the numerical model, a time series of groundwater levels were investigated to obtain the recharge input function. In the sandstone aquifer it could be shown that groundwater flow is characterised by flow in the fracture network as well as in the matrix. The largest fraction of recharge reaches the water table very quickly via the fracture network. However, both the thickness of the unsaturated zone and the low hydraulic conductivity of the sandstone matrix control the time lag of groundwater recharge. The time lag of the slow component to reach the water table is in the order of several years.

Description: The St. Servatius Church in Quedlinburg (UNESCO’s World Heritage Site, Germany) is characterised by long-standing stability problems and structural damages, which have been known over the last several centuries. The monotonous Cretaceous sandstone with its poor lithification is considered to be the main factor. The sandstone is characterised by a high porosity of around 30 Vol.% (max. ca. 35 Vol.%) and a corresponding high w-value. The porosity and the degree of cementation are responsible for the very low compressive strength of around 8 MPa at maximum, whereas under moisture these values are significantly reduced up to 40%. The freeze–thaw tests indicate a very poor resistance to frost weathering, which may explain the near-surface softening of the sandstone. Direct shear experiments with an approximate 60° angle of friction on the sandstone clearly demonstrate the safety margins. Initial geotechnical modelling does not favour the hypothesis that a landslide of the hill parallel to the southward dipping bedding planes (i.e. shear failure along weak zones) can occur. A prominent clay layer (also with a southward dip) below the entire castle hill is monitored to determine the possible amount of movement with respect to the geological discontinuities (e.g. joints, fractures). At present, a combination of foundation problems are being considered for the stability situation at the church. These include construction deficiencies due to deformation or softening of the foundation of the forerunner churches and missing or faulty connections from building additions. Geological factors responsible for the stability problems include the softening of the sandstone by the influence of weathering and penetrating water as well as the presence of possible shear planes and joints.

Description: Dimensional stones with a black color occupy a prominent place on the international market. Uruguayan dolerite dikes of andesitic and andesitic–basaltic composition are mined for commercial blocks of black dimensional stones. A total of 16 dikes of both compositions were studied and samples collected for geochemical and petrographical analysis. Color measurements were performed on different black dimensional stones in order to compare them with the Uruguayan dolerites. Samples of the two commercial varieties (Absolute Black and Moderate Black) were obtained for petrophysical analysis (e.g. density, porosity, uniaxial compressive strength, tensile strength, etc.). Detailed structural analyses were performed in several quarries. Geochemistry and petrography determines the intensity of the black color. The Uruguayan dolerite Absolute Black is the darkest black dimensional stone analyzed in this study. The petrophysical properties of Uruguayan dolerites make them one of the highest quality black dimensional stones. Structural analyses show that five joint sets have been recognized: two sub-vertical joints, one horizontal and two diagonal. These joint sets are one of the most important factors that control the deposits, since they control the block size distribution and the amount of waste material.

Description: One of the properties that makes marble such an excellent construction and ornamental material is its low porosity. It is very difficult for water or decay agents to penetrate the internal structure of materials with no or few pores, so enhancing the durability of these materials. However, environmental temperature fluctuations bring about significant physical changes in marbles that result in an increase in porosity, due to the appearance of new microcracks and the expansion of existing ones. These cracks offer new paths into the marble which make it easier for solutions containing pollutants to penetrate the material. Thermal expansion tests were performed on three different types of marble known as White, Tranco, and Yellow Macael (Almeria, Spain), after which an increase in porosity (from 17 to 73% depending on marble type) was observed, mainly due to crack formation. The structural changes occurring during thermal expansion tests were more significant in the case of White Macael samples, a fact that is not only related to its mineralogical composition but also to the morphology of the grains, grain boundaries and crystal size. Our research suggests that thermally weathered White Macael marble could be more susceptible to decay by other contaminant agents than Tranco or Yellow Macael. The use of hot-stage environmental scanning electron microscopy is proposed as a valid tool for observing, both in situ and at high magnification, changes in the fracture system of building stones induced by thermal stress.

Description: Highlights • The Fram Slide Complex has been active from late Miocene to late Pleistocene. • Local processes were critical for slope stability in the Fram Strait area. • Toe erosion caused by normal faulting may have led to retrogressive failure. • Low gradient contourite drifts might smooth and stabilize submarine slopes. • Low tsunami potential from the Fram Slide Complex could increase in the future. Abstract The best known submarine landslides on the glaciated NW European continental margins are those at the front of cross-shelf troughs, where the alternation of rapidly deposited glycogenic and hemi pelagic material generates sedimentary overpressure. Here, we investigate landslides in two areas built of contourite drifts bounded seaward by a ridge-transform junction. Seismic and bathymetric data from the Fram Slide Complex are compared with the tectonically similar Vastness area ~ 120 km to the south, to analyze the influence of local and regional processes on slope stability. These processes include tectonic activity, changes of climate and oceanography, gas hydrates and fluid migration systems, slope gradient, toe erosion and style of contourite deposition. Two areas within the Fram Slide Complex underwent different phases of slope failures, whereas there is no evidence at all for major slope failures in the Vastness area. The comparison cannot reveal the distinct reason for slope failure but demonstrates the strong impact of variation in the local controls on slope stability. The different failure chronologies suggest that toe erosion, which is dependent on the throw of normal faults, and the different thickness and geometry of contourite deposits can result in a critical slope morphology and exert pronounced effects on slope stability. These results highlight the limitations of regional hazard assessments and the need for multi-disciplinary investigations, as small differences in local controlling factors led to substantially different slope failure histories.

Description: We used a new sedimentary record from a small kettle wetland to reconstruct the Late Glacial and Holocene vegetation and fire history of the Krutoberegovo-Ust Kamchatsk region in eastern Kamchatka Peninsula (Russia). Pollen and charcoal data suggest that the Late Glacial landscape was dominated by a relatively fire-prone Larix forest-tundra during the Greenland Interstadial complex (GI 1) and a subarctic steppe during the Younger Dryas (GS1). The onset of the Holocene is marked by the reappearance of trees (mainly Alnus incana) within a fern and shrub dominated landscape. The Holocene Thermal Maximum (HTM) features shifting vegetational communities dominated by Alnus shrubs, diverse forb species, and locally abundant aquatic plants. The HTM is further defined by the first appearance of stone birch forests (Betula ermanii) – Kamchatka's most abundant modern tree species. The Late Holocene is marked by shifts in forest dynamics and forest-graminoid ratio and the appearance of new non-arboreal taxa such as bayberry (Myrica) and meadow rue (Filipendula). Kamchatka is one of Earth's most active volcanic regions. During the Late Glacial and Holocene, Kamchatka's volcanoes spread large quantities of tephra over the study region. Thirty-four tephra falls have been identified at the site. The events represented by most of these tephra falls have not left evidence of major impacts on the vegetation although some of the thicker tephras caused expansion of grasses (Poaceae) and, at least in one case, forest die-out and increased fire activity.

Description: Highlights • Receiver functions from ocean-bottom seismometer stations reveal no significant crustal thickening in the surrounding of the Tristan da Cunha hot spot. • The mantle transition zone to the NW of Tristan da Cunha is thickened and cool. • The mantle transition zone is potentially thinned to the south/southwest of Tristan da Cunha. • A thickness of 60 to 75 km beneath Tristan da Cunha argues for a compositional control on the seismological lithosphere in the South Atlantic. Abstract The most prominent hotspot in the South Atlantic is Tristan da Cunha, which is widely considered to be underlain by a mantle plume. But the existence, location and size of this mantle plume have not been established due to the lack of regional geophysical observations. A passive seismic experiment using ocean bottom seismometers aims to investigate the lithosphere and upper mantle structure beneath the hotspot. Using the Ps receiver function method we calculate a thickness of 5 to 8 km for the oceanic crust at 17 ocean-bottom stations deployed around the islands. Within the errors of the method the thickness of the oceanic crust is very close to the global mean. The Tristan hotspot seems to have contributed little additional magmatic material or heat to the melting zone at the mid-oceanic ridge, which could be detected as thickened oceanic crust. Magmatic activity on the archipelago and surrounding seamounts seems to have only effected the crustal thickness locally. Furthermore, we imaged the mantle transition zone discontinuities by analysing receiver functions at the permanent seismological station TRIS and surrounding OBS stations. Our observations provide evidence for a thickened (cold) mantle transition zone west and northwest of the islands, which excludes the presence of a deep-reaching mantle plume. We have some indications of a thinned, hot mantle transition zone south of Tristan da Cunha inferred from sparse and noisy observations, which might indicate the location of a Tristan mantle plume at mid-mantle depths. Sp receiver functions image the base of lithosphere at about 60 to 75 km beneath the islands, which argues for a compositionally controlled seismological lithosphere-asthenosphere boundary beneath the study area.

Description: Highlights • Observations show that formation of sediment-laden sea ice occurs in coastal polynyas in winter. • Sea ice rafted sediments are a significant component of the Laptev Sea’s sediment budget. • No observational evidence for sediment entrainment into sea ice in mid-shelf polynyas at water depth greater than 20 m. Abstract Sea ice is an important vehicle for sediment transport in the Arctic Ocean. On the Laptev Sea shelf (Siberian Arctic) large volumes of sediment-laden sea ice are formed during freeze-up in autumn, then exported and transported across the Arctic Ocean into Fram Strait where it partly melts. The incorporated sediments are released, settle on the sea floor, and serve as a proxy for ice-transport in the Arctic Ocean on geological time scales. However, the formation process of sediment-laden ice in the source area has been scarcely observed. Sediment-laden ice was sampled during a helicopter-based expedition to the Laptev Sea in March/April 2012. Sedimentological, biogeochemical and biological studies on the ice core as well as in the water column give insights into the formation process and, in combination with oceanographic process studies, on matter fluxes beneath the sea ice. Based on satellite images and ice drift back-trajectories the sediments were likely incorporated into the sea ice during a mid-winter coastal polynya near one of the main outlets of the Lena River, which is supported by the presence of abundant freshwater diatoms typical for the Lena River phytoplankton, and subsequently transported about 80 km northwards onto the shelf. Assuming ice growth of 12 to 19 cm during this period and mean suspended matter content in the newly formed ice of 91.9 mg l-1 suggests that a minimum sediment load of 8.4x104 t might have been incorporated into sea ice. Extrapolating these sediment loads for the entire Lena Delta region suggests that at least 65% of the estimated sediment loads which are incorporated during freeze-up, and up to 10% of the annually exported sediment load may be incorporated during an event such as described in this paper.

Description: The recent volcanic eruptions of Eyjafjallajökull 2010 and Grímsvötn 2011 demonstrated the risks that mediumsized explosive Icelandic eruptions pose to the North Atlantic region. Using the Eyjafjallajökull 2010 eruption as a case study, we assess how traceable such eruptions are in the marine sedimentary record at medial distances from the source and investigate which factors have affected the particle transport to the marine sedimentary archive. During R/V Poseidon cruise 457, we recovered 13 box cores at 100–1600 m water depths and distances of 18–180 km southwest, south, and east of Iceland. Volcanic glass shards from the uppermost surface sediment were analyzed for their major element composition by electron microprobe and assigned to their eruptive source by geochemical fingerprinting. The predominantly basaltic particles are mostly derived from the Katla, Grímsvötn-Lakagígar, and Bárðarbunga-Veiðivötn volcanic systems. We also identified rhyolitic particles from the Askja 1875 and Öræfajökull 1362 eruptions. Only three out of almost 900 analyzed glass shards are derived from the recent Eyjafjallajökull 2010 eruption, suggesting that medium-sized eruptions are only poorly preserved in marine sediments located at medial distances southwest to east of Iceland. We conclude that the frequency of past medium-sized eruptions is likely higher than detectable in this archive.

Description: Highlights: • Fungal infections represent an increasing threat to human health. • Fungal infections in plants are a worldwide problem to the agricultural industry. • Diverse antifungal compounds were isolated from different marine organisms. • The number of new antifungal marine natural products is rapidly developing. • Marine sponges and bacteria are the predominant sources for antifungal compounds. Abstract: Fungal diseases represent an increasing threat to human health worldwide which in some cases might be associated with substantial morbidity and mortality. However, only few antifungal drugs are currently available for the treatment of life-threatening fungal infections. Furthermore, plant diseases caused by fungal pathogens represent a worldwide economic problem for the agriculture industry. The marine environment continues to provide structurally diverse and biologically active secondary metabolites, several of which have inspired the development of new classes of therapeutic agents. Among these secondary metabolites, several compounds with noteworthy antifungal activities have been isolated from marine microorganisms, invertebrates, and algae. During the last fifteen years, around 65% of marine natural products possessing antifungal activities have been isolated from sponges and bacteria. This review gives an overview of natural products from diverse marine organisms that have shown in vitro and/or in vivo potential as antifungal agents, with their mechanism of action whenever applicable. The natural products literature is covered from January 2000 until June 2015, and we are reporting the chemical structures together with their biological activities, as well as the isolation source.

Description: The active volcanic island Tristan da Cunha, located at the southwestern and youngest end of the Walvis Ridge - Tristan/Gough hotspot track, is believed to be the surface expression of a huge thermal mantle anomaly. While several criteria for the diagnosis of a classical hotspot track are met, the Tristan region also shows some peculiarities. Consequently it is vigorously debated if the active volcanism in this region is the expression of a deep mantle plume, or if it is caused by shallow plate tectonics and the interaction with the nearby Mid-Atlantic Ridge. Because of a lack of geophysical data in the study area, no model or assumption has been completely confirmed. We present the first amphibian P-wave finite-frequency travel time tomography of the Tristan da Cunha region, based on cross-correlated travel time residuals of teleseismic earthquakes recorded by 24 ocean-bottom seismometers. The data can be used to image a low velocity structure southwest of the island. The feature is cylindrical with a radius of ~ 100 km down to a depth of 250 km. We relate this structure to the origin of Tristan da Cunha and name it the Tristan conduit. Below 250 km the low velocity structure ramifies into narrow veins, each with a radius of ~ 50 km. Furthermore, we imaged a linkage between young seamounts southeast of Tristan da Cunha and the Tristan conduit.

Description: Highlights: • Improved Claisen-Schmidt condensation using lithium hydroxide monohydrate in 1,4-dioxane. • Pyridylchalcones show good activity and selectivity against Trypanosoma brucei. • Pyridylchalcones show little activity against Leishmania donovani. • Promising leads in the development of novel compounds for the treatment of sleeping sickness. A library of novel pyridylchalcones were synthesised and screened against Trypanosoma brucei rhodesiense. Eight were shown to have good activity with the most potent 8 having an IC50 value of 0.29 μM. Cytotoxicity testing with human KB cells showed a good selectivity profile for this compound with a selectivity index of 47. Little activity was seen when the library was tested against Leishmania donovani. In conclusion, pyridylchalcones are promising leads in the development of novel compounds for the treatment of human African trypanosomiasis (HAT).

Description: Plankton communities play a key role in the marine food web and are expected to be highly sensitive to ongoing environmental change. Oceanic uptake of anthropogenic carbon dioxide (CO2) causes pronounced shifts in marine carbonate chemistry and a decrease in seawater pH. These changes–summarized by the term ocean acidification (OA)–can significantly affect the physiology of planktonic organisms. However, studies on the response of entire plankton communities to OA, which also include indirect effects via food-web interactions, are still relatively rare. Thus, it is presently unclear how OA could affect the functioning of entire ecosystems and biogeochemical element cycles. In this study, we report from a long-term in situ mesocosm experiment, where we investigated the response of natural plankton communities in temperate waters (Gullmarfjord, Sweden) to elevated CO2 concentrations and OA as expected for the end of the century (~760 μatm pCO2). Based on a plankton-imaging approach, we examined size structure, community composition and food web characteristics of the whole plankton assemblage, ranging from picoplankton to mesozooplankton, during an entire winter-to-summer succession. The plankton imaging system revealed pronounced temporal changes in the size structure of the copepod community over the course of the plankton bloom. The observed shift towards smaller individuals resulted in an overall decrease of copepod biomass by 25%, despite increasing numerical abundances. Furthermore, we observed distinct effects of elevated CO2 on biomass and size structure of the entire plankton community. Notably, the biomass of copepods, dominated by Pseudocalanus acuspes, displayed a tendency towards elevated biomass by up to 30–40% under simulated ocean acidification. This effect was significant for certain copepod size classes and was most likely driven by CO2-stimulated responses of primary producers and a complex interplay of trophic interactions that allowed this CO2 effect to propagate up the food web. Such OA-induced shifts in plankton community structure could have far-reaching consequences for food-web interactions, biomass transfer to higher trophic levels and biogeochemical cycling of marine ecosystems.

Description: In 2013, high-temperature vent fluids were sampled in the Nifonea vent field. This field is located within the caldera of a large shield-type volcano of the Vate Trough, a young extensional rift in the New Hebrides back-arc. Hydrothermal venting occurs as clear and black smoker fluids with temperatures up to 368 °C, the hottest temperatures measured so far in the western Pacific. The physico-chemical conditions place the fluids within the two-phase field of NaCl–H2O, and venting is dominated by vapour phase fluids with Cl concentrations as low as 25 mM. The fluid composition, which differs between the individual vent sites, is interpreted to reflect the specific geochemical fluid signature of a hydrothermal system in its initial, post-eruptive stage. The strong Cl depletion is accompanied by low alkali/Cl ratios compared to more evolved hydrothermal systems, and very high Fe/Cl ratios. The concentrations of REY (180 nM) and As (21 μM) in the most Cl-depleted fluid are among the highest reported so far for submarine hydrothermal fluids, whereas the inter-element REY fractionation is only minor. The fluid signature, which has been described here for the first time in a back-arc setting, is controlled by fast fluid passage through basaltic volcanic rocks, with extremely high water-rock ratios and only limited water-rock exchange, phase separation and segregation, and (at least) two-component fluid mixing. Metals and metalloids are unexpectedly mobile in the vapour phase fluids, and the strong enrichments of Fe, REY, and As highlight the metal transport capacity of low-salinity, low-density vapours at the specific physico-chemical conditions at Nifonea. One possible scenario is that the fluids boiled before the separated vapour phase continued to react with fresh glassy lavas. The mobilization of metals is likely to occur by leaching from fresh glass and grain boundaries and is supported by the high water/rock ratios. The enrichment of B and As is further controlled by their high volatility, whereas the strong enrichment of REY is also a consequence of the elevated concentrations in the host rocks. However, a direct contribution of metals such as As from magmatic degassing cannot be ruled out. The different fluid end-member composition of individual vent sites could be explained by mixing of vapour phase fluids with another fluid phase of different water/rock interaction history.

Description: Gorgonians are a key group of organisms in benthic marine communities with a wide bathymetric and geographical distribution. Although their presence on continental shelves and slopes has been known for more than 100 years, knowledge concerning the ecology of deep gorgonian species is still in a very preliminary stage. To overcome this situation, gorgonian assemblages located at 40–360 m depth were studied over a large geographical area on the continental shelf and upper slope of the Menorca Channel (Western Mediterranean Sea). A quantitative analysis of video transects recorded by a manned submersible and a remotely operated vehicle, were used to examine the diversity, distribution and demography of gorgonian species. Results showed high gorgonian diversity within this depth range (a total of nine species were observed) compared to Mediterranean coastal areas. Gorgonian assemblages on the continental shelf and upper slope were mostly monospecific (respectively 73% and 76% of occupied sampling units contained one single species), whereas shelf edge assemblages were highly multispecific (92% of occupied sampling units contained several species). This contrasts with the monospecificity of Mediterranean coastal gorgonian assemblages. Gorgonian populations on the continental shelf were mostly dominated by small colonies (88% of measured colonies) with few intermediate and large colonies (12% of measured colonies). In deeper areas small colonies were still dominant (60% of measured colonies), but intermediate and large colonies were much more abundant (40% of measured colonies). This suggests high recruitment rates on the continental shelf, but perturbations (trammel nets, long lines and strong storms) may limit the presence of intermediate and large colonies. Conversely, on the shelf edge and upper slope a more stable environment may allow colonies to reach larger dimensions. The identification and ecological characterization of these deep assemblages further extends the current knowledge about Mediterranean gorgonians, and is fundamental in improving the management and conservation of deep benthic ecosystems.

Description: The impact of anthropogenic ocean acidification (OA) on marine ecosystems is a vital concern facing marine scientists and managers of ocean resources. Euthecosomatous pteropods (holoplanktonic gastropods) represent an excellent sentinel for indicating exposure to anthropogenic OA because of the sensitivity of their aragonite shells to the OA conditions less favorable for calcification. However, an integration of observations, experiments and modelling efforts is needed to make accurate predictions of how these organisms will respond to future changes to their environment. Our understanding of the underlying organismal biology and life history is far from complete and must be improved if we are to comprehend fully the responses of these organisms to the multitude of stressors in their environment beyond OA. This review considers the present state of research and understanding of euthecosomatous pteropod biology and ecology of these organisms and considers promising new laboratory methods, advances in instrumentation (such as molecular, trace elements, stable isotopes, palaeobiology alongside autonomous sampling platforms, CT scanning and high-quality video recording) and novel field-based approaches (i.e. studies of upwelling and CO2 vent regions) that may allow us to improve our predictive capacity of their vulnerability and/or resilience. In addition to playing a critical ecological and biogeochemical role, pteropods can offer a significant value as an early-indicator of anthropogenic OA. This role as a sentinel species should be developed further to consolidate their potential use within marine environmental management policy making.

Description: Food supply is one of the main factors driving cold-water corals (CWC) distribution, which often concentrate on ridges where local near-bed turbulence/strong currents enhance food availability. However, efficiency in food capture is strongly dependent on current velocity. Moreover, seawater temperature may also affect feeding success, since polyp contraction or nematocyst function could be slower at temperatures below the natural thermal range of a species. The non-reef forming CWC Dendrophyllia cornigera occurs in areas at temperatures from 11 to 17 °C, but is apparently absent from most CWC reefs at temperatures constantly below 11 °C. This study thus aimed to assess if a reduction in feeding capacity may contribute to understand the absence of this CWC from strictly cold environments. The efficiency of D. cornigera to capture meso- and macrozooplankton was assessed under different flow speeds (2, 5 and 10 cm s − 1) and temperatures (8, 12, and 16 °C). Flow speeds did not significantly affect the capture of mesozooplankton, whereas capture of macrozooplankton was significantly enhanced with increasing flow speed. Both meso- and macrozooplankton captures were not significantly affected by temperature in D. cornigera. Overall, this CWC species is efficient in capturing zooplankton under a larger range of flow velocities than the widespread CWC Lophelia pertusa, whose capture efficiency significantly decreased from low to high flow speeds. Even if temperature does not directly affect the capture rates of D. cornigera, it may still influence the feeding capacity of this CWC since the capture rates at 8 °C were always in the lowest range of the observed values at each flow speed, and corals maintained at 8 °C required a much longer time to fully expand their polyps once they were placed in the incubation chambers, than corals maintained at 12 and 16 °C.

Description: Highlights • Crustal structure of Walvis Ridge reveals high seismic velocities in the lower crust intruding the African continent. • This modified crust is localized to approx. 100 × 100 km within the continent. • No indication for a large plume head observed The opening of the South Atlantic is a classical example for a plume related continental breakup. Flood basalts are present on both conjugate margins as well as aseismic ridges connecting them with the current plume location at Tristan da Cunha. To determine the effect of the proposed plume head on the continental crust, we acquired wide-angle seismic data at the junction of the Walvis Ridge with the African continent and modelled the P-wave velocity structure in a forward approach. The profile extends 430. km along the ridge and continues onshore to a length of 720. km. Crustal velocities beneath the Walvis Ridge vary between 5.5. km/s and 7.0. km/s, a typical range for oceanic crust. The crustal thickness of 22. km, however, is approximately three times larger than of normal oceanic crust. The continent-ocean transition is characterized by 30. km thick crust with strong lateral velocity variations in the upper crust and a high-velocity lower crust (HVLC), where velocities reach up to 7.5. km/s. The HVLC is 100 to 130. km wider at the Walvis Ridge than it is farther south, and impinges onto the continental crust of the Kaoko fold belt. Such high seismic velocities indicate Mg-rich igneous material intruded into the continental crust during the initial rifting stage. However, the remaining continental crust seems unaffected by intrusions and the root of the 40. km-thick crust of the Kaoko belt is not thermally abraded. We conclude that the plume head did not modify the continental crust on a large scale, but caused rather local effects. Thus, it seems unlikely that a plume drove or initiated the breakup process. We further propose that the plume already existed underneath the continent prior to the breakup, and ponded melt erupted at emerging rift structures providing the magma for continental flood basalts.

Description: Species distribution modelling can be applied to identify potentially suitable habitat for species with largely unknown distributions, such as many deep-water corals. Important variables influencing species occurrence in the deep sea, e.g. substrate composition, are often not included in these modelling approaches because high-resolution data are unavailable. We investigated the relationship between substrate composition and the occurrence of the two deep-water octocoral species Primnoa resedaeformis and Paragorgia arborea, which require hard substrate for attachment. On a scale of 10s of metres, we analysed images of the seafloor taken at two locations inside the Northeast Channel Coral Conservation Area in the Northwest Atlantic. We interpolated substrate composition over the sampling areas and determined the contribution of substrate classes, depth and slope to describe habitat suitability using maximum entropy modelling (Maxent). Substrate composition was similar at both sites - dominated by pebbles in a matrix of sand (〉80%) with low percentages of suitable substrate for coral occurrence. Coral abundance was low at site 1 (0.9 colonies of P. resedaeformis per 100m2) and high at site 2 (63 colonies of P. resedaeformis per 100m2) indicating that substrate alone is not sufficient to explain varying patterns in coral occurrence. Spatial interpolations of substrate classes revealed the difficulty to accurately resolve sparsely distributed boulders (3-5% of substrate). Boulders were by far the most important variable in the habitat suitability model (HSM) for P. resedaeformis at site 1, indicating the fundamental influence of a substrate class that is the least abundant. At site 2, HSMs identified cobbles and sand/pebble as the most important variables for habitat suitability. However, substrate classes were correlated making it difficult to determine the influence of individual variables. To provide accurate information on habitat suitability for the two coral species, substrate composition needs to be quantified so that small fractions (〈20% contribution of certain substrate class) of suitable substrate are resolved. While the collection and analysis of high-resolution data is costly and spatially limited, the required resolution is unlikely to be achieved in coarse-scale interpolations of substrate data.

Description: This study reconstructs the history of multiple industrial and urban mercury (Hg) emissions recorded in the sediment archive of Lake Luitel (France) from AD similar to 1860 to AD 2011. For this purpose, we provide a well constrained short-lived radionuclides continuous age-depth relationship of the sediment sequence (mean accumulation rate of 5.18 +/- 0.28 mm.yr(-1)) with Hg accumulation rates (Hg AR), Hg isotopic composition and extensive historical data. Hg AR were stable around 45 mu g.m(-2).y(-1) from 1860 to WWI and rose to reach their maximum at the end of WWII (250 mu g m(-2) y(-1)) followed by a gradual decreased to reach about 90 mu g m(-2) y(-1) in the current period. Normalization to a terrigenous Hg proxy highlighted the dominance of atmospheric Hg inputs to the lake. The combination of Hg AR with isotopic signatures through the use of binary mixing (Delta Hg-199 vs 1/Hg AR) models and isotopic plots (and comparison to literature data) allowed us to identify the main industrial and urban historical inputs. The major outcome of this study is that the Hg mass independent fractionation (MIF) signature did not enable the identification of particular anthropogenic sources but reflected an integrated pool of industrial and urban emissions which tend to shift to less negative MIF values (mean: -0.15 +/- 0.04%) during their period of maximum emissions. Temporal MIF and Hg AR variations depict the rising Hg emissions from the industrial revolution (1860-1910) to the modern industrial and urban development period (1950-1980). Mass dependent fractionation (MDF) signatures enabled the identification of major contributors in relation to their relative intensities lying between two endmember pools: (i) the combustion activities (smelters, cement factories and urban heating) with more negative delta Hg-202 values, and (ii) the chemical and electrometallurgical activities (electrochemistry, chlor-alkali) with higher delta Hg-202 values. Unconformities of MIF and MDF signatures were observed during WWI, WWII and interwar period, and were attributed to drastic and rapid changes in regional industrial activities. Finally, recent laws regarding Hg emissions (1998-2011) prove their efficiency as Hg AR decreased with a return to more negative MIF and MDF signatures such as during the industrial revolution period. Our study highlights that the combination of Hg isotopic data with Hg AR in sediment archives is a useful tool for reconstructing the history of anthropogenic Hg emissions, and has the potential to identifiy their relative contributions.

Description: Highlights • A rapid automated analytical method for simultaneous analysis of multiple trace metals in small volumes of seawater. • Isotope dilution is utilized for concentration quantification, eliminating sensitivity to variation in recovery. • Minimal variability in automated sample loading and elution volumes allows precise quantification via standard addition for monoisotopic elements. • High accuracy was confirmed by analysis of reference seawaters SAFe S, D1 and D2. • The utilized resin (WAKO) demonstrated improved recoveries for most tested trace metals in comparison to a NOBIAS Chelate-PA1 resin. A rapid, automated, high-throughput analytical method capable of simultaneous analysis of multiple elements at trace and ultratrace levels is required to investigate the biogeochemical cycle of trace metals in the ocean. Here we present an analytical approach which uses a commercially available automated preconcentration device (SeaFAST) with accurate volume loading and in-line pH buffering of the sample prior to loading onto a chelating resin (WAKO) and subsequent simultaneous analysis of iron (Fe), zinc (Zn), copper (Cu), nickel (Ni), cadmium (Cd), lead (Pb), cobalt (Co) and manganese (Mn) by high-resolution inductively-coupled plasma mass spectrometry (HR-ICP-MS). Quantification of sample concentration was undertaken using isotope dilution for Fe, Zn, Cu, Ni, Cd and Pb, and standard addition for Co and Mn. The chelating resin is shown to have a high affinity for all analyzed elements, with recoveries between 83 and 100% for all elements, except Mn (60%) and Ni (48%), and showed higher recoveries for Ni, Cd, Pb, Co and Mn in direct comparison to an alternative resin (NOBIAS Chelate-PA1). The reduced recoveries for Ni and Mn using the WAKO resin did not affect the quantification accuracy. A relatively constant retention efficiency on the resin over a broad pH range (pH 5–8) was observed for the trace metals, except for Mn. Mn quantification using standard addition required accurate sample pH adjustment with optimal recoveries at pH 7.5 ± 0.3. UV digestion was necessary to increase recovery of Co and Cu in seawater by 15.6% and 11.4%, respectively, and achieved full break-down of spiked Co-containing vitamin B12 complexes. Low blank levels and detection limits could be achieved (e.g., 0.029 nmol L⁻¹ for Fe and 0.028 nmol L⁻¹ for Zn) with the use of high purity reagents. Precision and accuracy were assessed using SAFe S, D1, and D2 reference seawaters, and results were in good agreement with available consensus values. The presented method is ideal for high throughput simultaneous analysis of trace elements in coastal and oceanic seawaters. We present a successful application of the analytical method to samples collected in June 2014 in the Northeast Atlantic Ocean.

Description: Polysialic acid (PSA) serves as a hydrophilic polymer and affords conjugated biologically active molecules a longer circulation time in vivo. Furthermore, PSA could potentially target tumor tissues and help achieve better curative effects. In this study, PSA was conjugated with octadecyl dimethyl betaine (BS18) to yield a PSA-BS18 conjugate. The PSA-BS18 modified liposomal epirubicin (EPI-SL), had a particle size of 133.63 ± 0.92 nm, a zeta potential of −26.23 ± 1.50 mV and an encapsulation efficiency (%EE) of 96.23 ± 1.16%. In vitro release studies showed that PSA-BS18 could delay EPI release from the modified liposomes. The MTT assay suggested that EPI-SL led to stronger cytotoxic activity than that exhibited by common and PEGylated liposomes. The pharmacokinetic study showed that EPI-SL prolonged the residence time of the EPI in the blood compared with that observed from common liposomes. Bio-distribution results obtained from tumor-bearing mice clearly demonstrated that PSA-BS18 increased the accumulation of modified liposomes in tumors compared with that of common liposomes. In the antitumor efficacy study, EPI-SL showed the best antitumor and life-prolonging effects among all of the tested formulations. These findings strongly indicate EPI-SL might have great potential as an effective approach for anticancer therapy.

Description: Highlights • Chronometric dating of Neanderthal remains to 190 ka from the volcanic context of Wannen-Ochtendung. • Red thermoluminescence dating (RTL) of heated detritical quartz extracted from crustal xenoliths • Shortened and full single aliquot regeneration (SAR) protocols agree. • Perfect agreement of RTL dating with argon dating for the identical events Abstract The partial neurocranium of a Neanderthal was recovered from deposits related to the latest volcanic activities recorded at the Wannen Volcanic Group. This last volcanic event provided heated mineral samples for thermoluminescence (TL) and Ar/Ar dating, allowing the estimation of the age of the hominin remains. Novel TL methods using a much less time consuming measurement protocol and employing the orange-red TL-signal (R-TL) were applied, resulting in ages of 177 ± 18 ka and 176 ± 21 ka for two samples of different geology. This new data is compared with standard TL-approaches for one of the samples, which provide an age of 187 ± 29 ka. The luminescence data is contrasted with a newly obtained Ar/Ar-age of 191 ± 12 ka for a sample from the identical heating event. All TL-dating results provide congruent results and are in perfect accordance with Ar/Ar dating, showing the applicability and accuracy of the new TL approach employed. These data also agree well with the geological age estimates and other chronometric data, placing the volcanism at Wannen to around 180–190 ka and thus providing a Saalian age of the fossil. Such an old age, however, contrasts to the reported preliminary placement of this specimen late in the Neanderthal lineage.

Description: Highlights: • We investigated growth and longevity of three deep-sea squids from the Monterey Bay. • We found daily growth increments in the statoliths of two deep-sea squids. • The estimated longevities are higher than those of shallow water relatives. • The estimated growth rates suggest a reduced pace of life in deep-sea squids. Abstract Coastal and epipelagic cephalopods are among the fastest growing invertebrates, with life cycles of typically 1 year or less. Evidence is accumulating that deep-sea taxa often live longer and grow slower than their shallow water relatives. We test the hypothesis that deep-sea squid show increased longevity and reduced growth rates compared to coastal and epipelagic species, by validation experiments and quantification of statolith increments of three deep-sea squids from the Monterey Submarine Canyon. The periodicity of statolith increment formation in coastal species is daily, but is unknown for deep-sea squid. Between 2010 and 2013, specimens of Chiroteuthis calyx, Galiteuthis phyllura and Octopoteuthis deletron were captured by remotely operated vehicles and trawl nets off California. ROV-captured living squid were immersed in tetracycline and kept alive in the lab for between 3 and 14 days. Correlating the number of elapsed days with the number of newly deposited statolith increments, and statolith growth after the fluorescent tetracycline mark, provided evidence of regular and daily increment deposition, in C. calyx and O. deletron. This relationship was less strong in G. phyllura and the one-increment-per-day hypothesis was not accepted for this species. Reconstructing growth rates based on statolith counts and wet weights from animals of a wide size range suggest that O. deletron is a slower growing squid (0.59% BW/day) than C. calyx (1.3% BW/day) and G. phyllura (1.2% BW/day). Octopoteuthis deletron matures at around two years, the oldest C. calyx was a mature male of 1.5 years and the eldest G. phyllura was 10 months and still immature. Maximum reported sizes for G. phyllura and C. calyx exceed those of our examined specimens, and therefore their longevity likely exceeds 2 years, in particular if the females brood their eggs. Our study supports the hypothesis that deeper living squid exhibit reduced growth rates and an increased longevity compared to shallow living species. We discuss these traits in the context of a life in the deep pelagic ocean.

Description: Highlights • Identify new fine-grained hydrate filled fracture units in the Terrebonne Basin. • Identify new hydrate bearing thin sands, mostly within fractured muds. • Present detailed seismic amplitude maps of the new hydrate bearing units. • Discuss methane migration mechanisms and hydrate formation in thin sands. • Identify and discuss source-reservoir relationships between thick muds and thin sands. Abstract The interactions of microbial methane generation in fine-grained clay-rich sediments, methane migration, and gas hydrate accumulation in coarse-grained, sand-rich sediments are not yet fully understood. The Terrebonne Basin in the northern Gulf of Mexico provides an ideal setting to investigate the migration of methane resulting in the formation of hydrate in thin sand units interbedded with fractured muds. Using 3D seismic and well log data, we have identified several previously unidentified hydrate bearing units in the Terrebonne Basin. Two units are 〉100 m-thick fine-grained clay-rich units where gas hydrate occurs in near-vertical fractures. In some locations, these fine-grained units lack fracture features, and they contain 1–4-m thick hydrate bearing-sands. In addition, several other thin sand units were identified that contain gas hydrate, including one sand that was intersected by a well at the location of a discontinuous bottom-simulating reflector. Using correlation of well log data to seismic data, we have mapped and described these new units in detail across the extent of the available data, allowing us to determine the variation of seismic amplitudes and investigate the distribution of free gas and/or hydrate. We present several potential source-reservoir scenarios between the thick fractured mud units and thin hydrate bearing sands. We observe that hydrate preferentially forms within thin sand layers rather than fractures when sands are present in larger marine mud units. Based on regional mapping showing the patchy lateral extent of the thin sand layers, we propose that diffusive methane migration or short-migration of microbially generated methane from the marine mud units led to the formation of hydrate in these thin sands, as discontinuous sands would not be conducive to long-range migration of methane from deeper reservoirs.

Description: Over the last decade there has been renewed interest in determining the water contents of basaltic magmas. A commonly applied method is analysis of H2O from melt inclusions in olivine. However, it is also well known that these can rapidly lose (or gain) H2O by diffusion. An alternative is to measure the H2O contents of clinopyroxene phenocrysts and use a partition coefficient (D) to estimate the original H2O content of the host magma. This approach is not without complications and several recent studies have attempted to assess the effects of diffusive loss of H2O from magmatic clinopyroxenes. In the ideal case, these crystals should be taken from rapidly cooled tephra or lapilli but such materials are not always available. In order to further assess the potential of using 5-10mm clinopyroxenes from lavas we undertook a detailed, multi-analytical investigation of clinopyroxenes from an ankaramite flow on Pico Island in the Azores. We conclude that these can be trusted to preserve (probably minimum) magmatic H2O contents if the H2O concentrations of multiple clinopyroxenes from a single sample form a linear correlation with the AlIV content that demonstrates a coupled substitution with little or no H2O loss. Conversely, if H2O contents decrease from core to rim whereas AlIV contents remain relatively constant then it is likely that those clinopyroxenes lost H2O during differentiation and/or cooling. We suspect that the olivine melt inclusions we analysed from Pico and São Miguel Islands also underwent diffusive loss of H2O. Using these criteria, we present clinopyroxene-derived magmatic H2O estimates for Corvo, Flores Faial, Pico and São Miguel Islands that range from 0.28 to 2.2wt%. When combined with published data these show that H2O contents often extend to higher values on the islands than along the adjacent mid-Atlantic ridge. These localised, elevated H2O contents can explain why the islands are emergent despite being situated away from the ridge and perhaps also the asymmetric nature of the bathymetry of the archipelago. It is possible that this H2O was recycled from material subducted very early on in Earth's history.

Description: Highlight • It is important to develop systems able to detect and classify mineralized zones from waste materials while drilling deep-water; • Seismic P-wave velocities (Vp) were measured on 40 SMS and unmineralized mini-cores; • The porosity was back-calculated from Vp; • The results were compared with electrical resistivity measurements; • Using Archie’s Law, it is possible to observe that metallic conduction exists. Abstract Deep-sea mining exploration for seafloor massive sulfide (SMS) deposits is currently increasing. At present, most exploration activities are surficial and use indirect methods to identify potential sites and perform first assessments. For a proper resource estimate, however, drilling is inevitable. By using seabed drill rigs, exploration costs can be reduced considerably. SMS deposits are normally found at depths between 1000 and 4000 m and in order for deep sea mining to be implemented, reliable technologies are needed. Additionally, the development of geophysical systems that can detect and classify mineralized zones from waste materials while drilling could decrease costs and speed up offshore operations by limiting the amount of drilling of unmineralized materials. This paper shows how the physical properties of SMS can be used to discriminate between host rocks and mineralization. Seismic P-wave velocities (Vp) were measured on 40 SMS and unmineralized mini-cores. By back-calculating the porosity from Vp, comparing the results with electrical resistivity measurements, and using Archie's Law, it is possible to observe that metallic conduction exists. For deep-sea mineral exploration, the combination of seismic tests, electrical resistivity and magnetic susceptibility could support the preliminary discrimination of mineralized samples in the cores while drilling at the seafloor.

Description: A Benguela Niño developed in November 2010 and lasted for 5 months along the Angolan and Namibian coastlines. Maximum amplitude was reached in January 2011 with an interannual monthly Sea Surface Temperature anomaly larger than 4 °C at the Angola Benguela Front. It was the warmest event since 1995. Consistent with previous Benguela Niños, this event was generated by a relaxation of the trade winds in the western equatorial Atlantic, which triggered a strong equatorial Kelvin wave propagating eastward along the equator and then southward along the southwest African coast. In the equatorial band, the associated ocean sub-surface temperature anomaly clearly shows up in data from the PIRATA mooring array. The dynamical signature is also detected by altimetry derived Sea Surface Height and is well reproduced by an Ocean Linear Model. In contrast to previous Benguela Niños, the initial propagation of sub-surface temperature anomalies along the equator started in October and the associated warming in the Angolan Benguela Front Zone followed on as early as November 2010. The warming was then advected further south in the Northern Benguela upwelling system as far as 25°S by an anomalously strong poleward sub-surface current. Demise of the event was triggered by stronger than normal easterly winds along the Equator in April and May 2011 leading to above normal shoaling of the thermocline along the Equator and the south-west African coastline off Angola and an associated abnormal equatorward current at the Angola Benguela Front in April and May 2011.

Description: Highlights • Analytical and numerical methods are employed to investigate fluid flow in active mud volcanoes or SHHS. • The effects of conduit radius and fluid properties on the flow rate are presented. • Conduit radius of such piercement systems cannot exceed a few metres at depth. • Clasts, if not densely packed, will not affect the flow rate when they are smaller than a fifth of the conduit size. • A maximal exsolution depth between 1800 and 3200 m is inferred for CH4 and between 750 and 1000 m for CO2. Clastic eruptions involve the rapid ascension of sedimentary clasts together with fluids, gas and/or liquid phases that may further deform and brecciate the host rocks. These fluids transport the resulting mixture, called mud breccia, to the surface. Such eruptions are often associated with geological structures such as mud volcanoes, hydrothermal vent complexes and, more generally, piercement structures. They involve various processes, acting over a wide range of scales, which makes them a complex and challenging multi-phase system to model. Although piercement structures have been widely studied and discussed, only a few attempts have been made to model the dynamics of such clastic eruptions. The ongoing Lusi mud eruption, in the East Java back-arc basin, which began in May 2006, is a spectacular large scale clastic eruption. The Lusi eruptive behaviour has been extensively studied over the past decade and thus represents a unique opportunity to better understand ongoing clastic eruptions and thus fossil clastic systems. We use both analytical formulations and numerical models to investigate simple relationships between the mud breccia properties (density, viscosity, gas and clast content) and the volumetric flow rate. Our results show that the conduit radius of such piercement systems cannot exceed a few metres at depth, and that clasts, if not densely packed, will not affect the flow rate when they are smaller than a fifth of the conduit size. Using published data for the annual gas fluxes at Lusi, we infer a maximal depth at which exsolution starts. This occurs between 1800 m and 3200 m depth for methane and between 750 m and 1000 m for carbon dioxide. Based on annual gas fluxes, we estimate that the conduit radius should be no larger than 1.5 m to match the maximal mud discharge, recorded at Lusi.

Description: Highlights • Planktic foraminifera species show an Early Holocene 14C plateau analogous to the atmospheric 14C plateau at 10.2–9.6 cal ka. • Age-calibrated Early Holocene 14C plateau boundaries provide precise age control in 3 sediment cores on a 900 km long transect. • Differences between planktic foraminiferal and atmospheric 14C ages reveal the 14C reservoir age of local surface waters. • Different planktic species document different 14C reservoir ages characteristic of different surface and subsurface waters. To trace spatial variations in Holocene reservoir ages of surface and subsurface waters we studied narrowly spaced 14C records of planktic foraminifera in three high-sedimentation rate cores from the Nordic Seas, the Barents Sea continental margin and eastern Fram Strait. The two northern cores reveal a distinct Early Holocene 14C plateau in dates on the subsurface dweller Neogloboquadrina pachyderma at 9.3–9.1 14C ka. The plateau was tuned to an atmospheric 14C plateau at 9.0–8.7 14C ka that spans 10.2–9.6 calendar ka. These two plateau boundaries provide robust age control points to estimate short-term changes in sedimentation rate and to correlate paleoceanographic signals over 900 km along the West Spitsbergen Current. The difference between planktic and atmospheric 14C plateau ages suggests local 14C reservoir ages of 370–400 yr. Planktic foraminifera species that inhabit different water masses document different reservoir ages. By comparison, the subpolar N. incompta reveals a reservoir age of 150 yr, probably formed in well-mixed Atlantic-sourced waters during winter. The near-surface dweller Turborotalita quinqueloba shows an age of 290 yr in the Fram Strait, but one of 720 yr at the Barents Sea continental margin. The latter age suggests a calcification within old, meltwater-enriched Arctic surface waters admixed by the East Spitsbergen Current. Likewise, we assign an elevated reservoir age of 760 yr on mixed species at a Norwegian Sea site near 71°N to Preboreal meltwaters that spread from northern Norway far west, also documented by the spatial distribution of a coeval δ13C minimum of N. pachyderma.

Description: It was proposed to utilize siderite FeCO3 in mid to late Archaean Superior type banded as a proxy to constrain the CO2 partial pressure of Archaean atmospheres. Implicit in this proposition is that siderite was a primary carbonate mineral that crystallized directly from Fe2+ enriched Archaean seawater, in equilibrium with atmospheric CO2. To our knowledge that proposition has not been demonstrated to be valid. We test with water-gas exchange experiments under controlled CO2 partial pressures if siderite can be stabilized as a primary mineral in Fe2+ bearing seawater. Reduced seawater proxies enriched in Fe2+ and Mn2+ are equilibrated with reduced N2-CH4-CO2-H2 gas phases with variable CO2. The solid phases stabilized in Fe2+ enriched water compositions are amorphous ferrous iron hydroxy carbonates. Crystalline siderite FeCO3 is not found to be a stable phase. The phases precipitating from Mn2+ enriched water include crystalline rhodochrosite MnCO3 and possibly amorphous Mn-enriched phases. Based on these results we advise against using siderite in banded iron formations as a CO2 sensor for the Archaean atmosphere.