ALBERT

Description: The Black Sea has undergone several limnic and marine stages due to fluctuations in the global sea level. The exchange of saline water from the Mediterranean Sea to the Black Sea through the Bosporus Strait was interrupted when the sea level dropped below the Bosporus sill. This induced limnic conditions, while marine conditions were established after the reconnection to saline Mediterranean seawater. Extended river fan systems developed during sea level low-stands, providing large amounts of organic material being buried by rapid sedimentation on the slopes of the Black Sea margins. The biogenic degradation of this material produces most of the methane gas expelled into the anoxic water column today. This largely happens by ubiquitous cold vents at ~700 m water depth (i.e. at the stability boundary of methane hydrates) and by mud volcanoes in ~2000 m water depth. A significant amount of gas is expected to accumulate in the sediment within the methane hydrate stability zone. However, bottom-simulating reflectors, the seismic indicator for gas hydrates, are not found everywhere along the margin. Recent analyses of the Danube and Dniepr fans have revealed a discontinuous gas hydrate formation in an area with no active seeps, while areas of active seepage located in the vicinity of BSR reflections held no gas hydrates. In addition, the ongoing diffusion of salt into the uppermost Black Sea sediment pore space since the last glacial maximum further reduces the volume of the gas hydrate stability zone. Estimates of the total amount of gas stored in gas hydrates therefore require a detailed structural analysis prior to regional- or basin-scale modelling attempts.

Description: Marine electromagnetic methods provide useful and independent measures for the identification and quantification of submarine gas hydrates. The resistivity of seafloor sediments, drawn from area-wide electromagnetic data, mainly depends on the sediment porosity and the nature of the pore fluid. Gas hydrates and free gas are both electrically resistive. The replacement of saline water, thus conductive pore water with resistive gas hydrate or free gas, increases the sediment resistivity and can be used to provide accurate saturation estimates if the background lithology is known. While seismic methods are predominantly used to study the distribution of submarine gas hydrates, a growing number of global field studies have demonstrated that the joint interpretation of marine seismic and electromagnetic methods improves the evaluation of submarine gas hydrate targets. This article discusses the relationship between resistivity and free gas/gas hydrate saturation levels, how the resistivity of the sediment may be measured and summarizes the status and results of current and past field studies.

Description: Every year, vast quantities of plastic debris arrive at the ocean surface. Nevertheless, our understanding of plastic movements is largely incomplete and many of the processes involved with the horizontal and vertical displacement of plastics in the ocean are still basically unknown. In this chapter we review the dynamics associated with the transport of plastics and other pollutants at oceanic fronts. Fronts had been historically defined as simple barriers to exchange, but here we show that the role of these structures in influencing the transport of plastics is more complex. The tools used to investigate the occurrence of frontal structures at various spatial scales are reviewed in detail, with a particular focus on their potential applications to the study of plastic pollution. Three selected case studies are presented to better describe the role of fronts in favoring or preventing plastic exchanges: the large-scale Antarctic Circumpolar Current, a Mediterranean mesoscale front, and the submesoscale fronts in the Gulf of Mexico. Lastly, some aspects related to the vertical subduction of plastic particles at oceanic fronts are discussed as one of the most promising frontiers for future research. The accumulation of floating debris at the sea surface is mainly affected by the horizontal components of frontal dynamics. At the same time, vertical components can be relevant for the export of neutrally buoyant particles from the surface into the deep sea. Based on these evidences, we propose that submesoscale processes can provide a fast and efficient route of plastic transport within the mixed layer, while mesoscale instabilities and associated vertical velocities might be the dominant mechanism to penetrate the deeper ocean on slower but broader scales. We conclude that given the ubiquitous presence of fronts in the world’s ocean, their contribution to the global plastic cycle is probably not negligible and the role of these processes in vertically displacing neutrally buoyant microplastics should be investigated in more detail.

Description: The Barents Sea, located close to the Arctic Ocean, is a petroleum province featuring an extensive occurrence of gas hydrates and shallow gas in compacted sediments. Glacial erosion and uplift have contributed to the migration of gas originating from deeper rocks to the shallow sediments of this region, resulting in hydrates with higher-order hydrocarbons in addition to methane. This article documents reported gas hydrate indications and major controls on hydrate stability in the Barents Sea.

Description: Since global navigation satellite systems (GNSS) for determining the absolute geolocation do not reach into the ocean, underwater robots typically obtain a GNSS position at the water surface and then use a combination of different sensors for estimating their pose while diving, including inertial navigation, acoustic doppler velocity logs, ultra short baseline localization systems and pressure sensors. When re-navigating to the same seafloor location after several days, months or years, e.g. for coastal monitoring, the absolute uncertainty of such systems can be in the range of meters for shallow water, and tens of meters for deeper waters in practice. To enable absolute relocalization in marine data science applications that require absolute seafloor positions in the range of centimeter precision, in this contribution we suggest to equip the monitoring area with visual markers that can be detected reliably even in case they are partially overgrown or partially buried by sediment, which can happen quickly in coastal waters. Inspired by patterns successful in camera calibration, we create robust markers that exhibit features at different scales, in order to allow detection, identification and pose estimation from different cameras and various altitudes as visibility (and therefore the maximum possible survey altitude) in coastal waters can vary significantly across seasons, tides and weather. The low frequency content of the marker resembles a human-readable digit, in order to allow easy identification by scientists. We present early results including promising initial tests in coastal waters.

Description: While offshore groundwater has been utilized by coastal communities as far back as 1000 BC, only in the past 10 years has the global volume of fresh-to-brackish water hosted in offshore aquifers been truly appreciated. There are vast quantities (~300–500 × 103 km3) of offshore freshened groundwater sequestered in continental shelf sediments under water depths of less than 60 m within 110 km of the coastline. New marine geophysical methods now make it possible to map and quantify low salinity offshore groundwater bodies. To date, these offshore resources have not been developed. Offshore freshened groundwater could be produced if wells are located close to the shoreline and coastal desalination plants.

Description: Underwater images are challenging for correspondence search algorithms, which are traditionally designed based on images captured in air and under uniform illumination. In water however, medium interactions have a much higher impact on the light propagation. Absorption and scattering cause wavelength- and distance-dependent color distortion, blurring and contrast reductions. For deeper or turbid waters, artificial illumination is required that usually moves rigidly with the camera and thus increases the appearance differences of the same seafloor spot in different images. Correspondence search, e.g. using image features, is however a core task in underwater visual navigation employed in seafloor surveys and is also required for 3D reconstruction, image retrieval and object detection. For underwater images, it has to be robust against the challenging imaging conditions to avoid decreased accuracy or even failure of computer vision algorithms. However, explicitly taking underwater nuisances into account during the feature extraction and matching process is challenging. On the other hand, learned feature extraction models achieved high performance in many in-air problems in recent years. Hence we investigate, how such a learned robust feature model, D2Net, can be applied to the underwater environment and particularly look into the issue of cross domain transfer learning as a strategy to deal with the lack of annotated underwater training data.

Description: Fish food is an inevitable item in human consumption with healthy sourceof good quality proteins and fat. Aqua industry can help to improve food security,livelihoods for the poorest and to meet the world’s food demands. But producingmore seafood that is at affordable cost with rich nutrition is challenging for aquaindustry. Many factors affect the productivity of aqua industry; one such an impor-tant constraint is bacterial diseases. Hence, Aqua industry, a booming businesssector, immensely requires continued research with scientific and technical devel-opments, and innovations. Study of bacterialfish disease is one such thrust areawhich requires intense research to understand the causes and control bacterialdiseases infish. The appearance and development of afish disease is the result ofthe interaction among pathogen, host and environment. An insight into bacterialfishdiseases, clinical symptoms and treatment may help to manage the bacterial diseasesand so can make aqua industry a more profitablefield. This chapter deals withdifferent aspects of the most threatening bacterial diseases, occurring in farmedfishes and also in wildfishes, which are results infish loss and economic lossworldwide. A wide range of gram positive and gram-negative bacteria causingbacterial diseases, clinical symptoms, diagnosis, treatment, vaccines and the natureof water habitat are also discussed in this chapter.

Description: The Digital Earth project aimed for the integration of data science and Earth science. Here, we reflect on the main lessons learned that include the need for interdisciplinary collaboration, thinking out of the box, the concept of ‘thinking in workflows’ and models for the sustainable implementation of scientific software, data infrastructure and policies.

Description: Digital Earth is a project funded by the German Helmholtz Association with all centers of the research field Earth and Environment involved. The main goal of the Digital Earth project is to develop and bundle data science methods in extendable and maintainable scientific workflows that enable natural scientists in collaboration with data scientists to achieve a deeper understanding of the Earth system. This has been achieved by developing solutions for data analysis and exploration with visual and computational approaches with data obtained in a SMART monitoring approach and modeling studies, accompanied by a continuous evaluation of the collaboration processes. In this chapter, the history, setup, and focus of the Digital Earth project are described.