ALBERT

Description: Techniques have been developed for the sub-pixel location of control points in satellite images returned by the Voyager spacecraft. The procedure uses digital imaging data in the neighborhood of the point to form a multipicture model of a piece of the surface. Comparison of this model with the digital image in each picture determines the control point locations to about a tenth of a pixel. At this level of precision, previously insignificant effects must be considered, including chromatic aberration, high level imaging distortions, and systematic errors due to navigation uncertainties. Use of these methods in the study of Jupiter's satellite Io has proven very fruitful.

Description: Normalized 18-GHz microwave brightness temperatures, T(B), and a vegetation index determined from satellite radiometer data are combined with climatically modeled surface moisture estimates to constrain a simple physically based soil moisture model. It is found that the normalized T(B) values correlated well with soil moisture when the data were segregated by vegetation index range, but less so when all the data were combined. By using the vegetation index parameter, the model is shown to account for about 70 percent of the variability in modeled surface soil moisture.

Description: A simple equation relating the Microwave Polarization Difference Index (MPDI) and the Normalized Difference Vegetation Index (NDVI) is proposed which represents well data obtained from Nimbus 7/SMMR at 37 GHz and NOAA/AVHRR Channels 1 and 2. It is found that there is a limit which is characteristic of a particular type of cover for which both indices are equally sensitive to the variation of vegetation, and below which MPDI is more efficient than NDVI. The results provide insight into the relationship between water content and chlorophyll absorption at pixel size scales.

Description: This study evaluates the potential of measuring/mapping forest damage in spruce-fir forests in the Green Mountains of Vermont and White Mountains of New Hampshire using Landsat Thematic Mapper (TM) data. The TM 1.65/0.83-micron (TM5/4) and 2.22/0.83-micron (TM7/4) band ratios were found to correlate well with ground-based measurements of forest damage (a measure of percentage foliar loss) at 11 spruce-fir stands located on Camels Hump, a mountain in northern Vermont. Images using 0.56 and 1.65-micron bands with 1.65/0.83-micron band ratios indicated locations of heavy conifer forest damage. Both 1.65/0.83 and 2.22/0.83-micron band ratios were used to quantify levels of conifer forest damage among individual mountains throughout many of the Green and White Mountains. Damage was found to be consistently higher for the Green than the White Mountains.

Description: An airborne pulsed laser system was used to obtain canopy height data over a southern pine forest in Georgia in order to predict ground-measured forest biomass and timber volume. Although biomass and volume estimates obtained from the laser data were variable when compared with the corresponding ground measurements site by site, the present models are found to predict mean total tree volume within 2.6 percent of the ground value, and mean biomass within 2.0 percent. The results indicate that species stratification did not consistently improve regression relationships for four southern pine species.

Description: The use of remote sensing data to monitor and analyze the arctic environment is examined. Landsat MSS, TM simulated, NS001, Seasat, and airborne radar are employed to investigate the Strand and Dune areas on the Arctic Coastal Plain in Alaska. The Strand area contains landforms associated with permafrost and the Dune area is dominated by eolian deposits consisting of large longitudinal dunes. The remote sensing data are compared to baseline geomorphic maps derived from aerial photography. It is observed that the multispectral data are better than the radar data for the detection and recognition of arctic landforms, and the NS001 data provided the highest spatial resolution and correlated well with the high-altitude aerial photography.

Description: Over large areas in the tropics, satellite imagery is the principal source of data on the area, current stature, and extent of disturbance of the forests. The information from imagery that covers large areas at low resolution is greatly enhanced when different types of imagery can be compared. The paper presents a comparison of data from Landsat MSS and from the Shuttle Imaging Radar (SIR-A) L band HH polarization data for sites in the Amazon Basin. Results indicate that SIR-A backscatter from the undisturbed forest was lower than that from some disturbed areas and from flooded forests and that SIR-A brightness, increases nonlinearly with the Landsat normalized difference vegetation index. It is hypothesized that the brightest radar returns in southern Amazonia are from newly cleared forests that are littered with standing and fallen tree boles that function as corner reflectors; and that backscatter will diminish from disturbed areas over time as fields are burned repeatedly.

Description: This study evaluated the utility of data collected by the high-spectral resolution airborne imaging spectrometer (AIS-2, tree mode, spectral range 0.8-2.2 microns) and the broad-band Daedalus airborne thematic mapper (ATM, spectral range 0.42-13.0 micron) in assessing forest decline damage at a predominantly Scotch pine forest in the FRG. Analysis of spectral radiance values from the ATM and raw digital number values from AIS-2 showed that higher reflectance in the near infrared was characteristic of high damage (heavy chlorosis, limited needle loss) in Scotch pine canopies. A classification image of a portion of the AIS-2 flight line agreed very well with a damage assessment map produced by standard aerial photointerpretation techniques.

Description: Visible IR Intelligent Spectrometer (VIRIS) reflectance data have been found to have similar features that are related to air-pollution-induced forest decline and visible damage in both the red spruce of Vermont and the Norway spruce of Baden-Wuerttemberg; the similarity suggests a common source of damage. Spectra of both species include a 5-nm blueshifting of the red-edge inflection point, while pigment data for both species indicate a loss of total chlorophylls. The blue shift of the chlorophyll absorption maximum, as well as the increased red radiance and decreased near-IR radiance of the damaged spruce, may be used to delineate and map damage areas.

Description: Recent advances in imaging spectroscopy for remote sensing applications are discussed, reviewing the results of recent investigations. The advantages offered by the higher spectral resolution of imaging spectroscopy relative to scanners such as Landsat MSS and TM are explained; the design and performance of the Airborne Imaging Spectrometer (Vane et al., 1984) are described and illustrated with drawings, photographs, and sample images; data processing and analysis techniques are outlined; and applications to geological and botanical research are considered.

Description: The effects of look angle and wavelength variation in geologically applied radar images are examined and the applications of observations of these effects for the study of other planets are discussed. Seasat, SIR-A, SIR-B, and airborne radar images and multiple look angle and multiwavelength scatterometer data are used. It is found that smaller look angle radar data can provide good discrimination among certain diverse materials which are not distinguishable at larger look angles, such as subpixel fault scarps and volcanic dykes. Discriminant analyses of scatterometer data of all geological targets observed gave best results with minimum data by using all wavelengths available and small look angles. The results provide information on the nature of radar images which could be valuable in interpreting radar images of Venus.

Description: Four doubled CO2 experiments with the GISS general circulation model are compared to investigate the consistency of changes in water availability over the United States. The experiments compare the influence of model sensitivity, model resolution, and the sea-surface temperature gradient. The results show that the general mid-latitude drying over land is dependent upon the degree of mid-latitude eddy energy decrease, and thus the degree of high-latitude temperature change amplification. There is a general tendency in the experiments for the northern and western United States to become wetter, while the southern and eastern portions dry. However, there is much variability from run to run, with different regions showing different degrees of sensitivity to the parameters tested. The results for the western United States depend most on model resolution; those for the central United States, on the sea-surface temperature gradient and the degree of mid-latitude ocean warming; and those for the eastern United States, on model sensitivity. The changes in particular seasons depend on changes in other seasons, and will therefore be sensitive to the realism of the ground hydrology parameterization.

Description: Recent research on the remote sensing of forest leaf and canopy biochemical contents suggests that the shortwave IR region contains this information; laboratory analyses of dry ground leaves have yielded reliable predictive relationships between both leaf nitrogen and lignin with near-IR spectra. Attention is given to the application of these laboratory techniques to a limited set of spectra from fresh, whole leaves of conifer species. The analysis of Airborne Imaging Spectrometer data reveals that total water content variations in deciduous forest canopies appear as overall shifts in the brightness of raw spectra.

Description: Biomass of growing vegetation over large semiarid regions can be estimated by digital manipulation of data from the AVHRR on NOAA polar-orbiting satellites. Here, the African Sahel is classified using a methodology which incorporates both the normalized difference and CAUSE procedures for the monitoring of vegetation during drought conditions. Preliminary analysis of color IR photographs taken on Space Shuttle missions indicates that such photographs can be digitized, registered to maps and other images, and utilized to fill temporal gaps in the historical record of data from unmanned satellites.

Description: A field investigation using thermal remote sensing was performed to test the feasibility of detecting the surface topography of granite bedrock beneath a thin cover of alluvium. Imagery of a region of the Mojave Desert were taken with an airborne multispectral scanner with thermal spectral bandwidths of 10.4 and 12.5 microns an instantaneous field of view of 2.5 mrad. It is suggested that a buried high thermal diffusivity horizon measurably lowers the surface temperature of the overlying lower diffusivity material during the peak of the annual heating cycle.

Description: Multidirectional reflectance factor measurements acquired in the summer of 1986 are used to make estimates of big bluestem grass albedo, evaluating the variation of albedo with changes in solar zenith angle and phenology. On any given day, the albedo was observed to increase by at least 19 percent as solar zenith angle increased. Changes in albedo were found to correspond to changes in the green leaf area index of the grass canopy. Estimates of albedo made using reflectance data acquired within only one or two azimuthal planes and at a restricted range of view zenith angle were evaluated and compared to 'true' albedos derived from all available reflectance factor data. It was found that even a limited amount of multiple direction reflectance data was preferable to a single nadir reflectance factor for the estimation of prarie grass albedo.

Description: Laboratory reflectance measurements of 10 soils were used to determine the relationship between soil moisture and three spectral indices: the TM5/7 ratio and the Wetness(R) and Brightness(R) features of the reflectance factor TM Tasseled Cap transformation. Response of the indices to dry mass water percentage was approximately linear for individual soils, except for Wetness(R) and Brightness(R) at high moisture content. Soil differences in the slopes of the Wetness(R)- and Brightness(R)-moisture content relationships were almost entirely eliminated by expressing water content as the percentage of water retained at 0.1 bar (10 kPa) tension (relative water content). The resultant soil lines were offset from one another by the differences in dry soil index value. Slope of the TM5/7 response was not completely normalized by expressing moisture status as relative water content, because slope appeared to vary with dry soil ratio value. Sensitivity to the effects of illumination angle was negligible for the TM5/7 ratio, somewhat greater for Wetness(R) and greatest for Brightness(R).

Description: A comparison is made between linear discriminant analysis and supervised classification results based on signatures from the Landsat TM, the Thermal Infrared Multispectral Scanner (TIMS), and airborne SAR, alone and combined into extended spectral signatures for seven sedimentary rock units exposed on the margin of the Wind River Basin, Wyoming. Results from a linear discriminant analysis showed that training-area classification accuracies based on the multisensor data were improved an average of 15 percent over TM alone, 24 percent over TIMS alone, and 46 percent over SAR alone, with similar improvement resulting when supervised multisensor classification maps were compared to supervised, individual sensor classification maps. When training area signatures were used to map spectrally similar materials in an adjacent area, the average classification accuracy improved 19 percent using the multisensor data over TM alone, 2 percent over TIMS alone, and 11 percent over SAR alone. It is concluded that certain sedimentary lithologies may be accurately mapped using a single sensor, but classification of a variety of rock types can be improved using multisensor data sets that are sensitive to different characteristics such as mineralogy and surface roughness.

Description: A radar image of the Lake Champlain West quadrangle in the Adirondack Mountains of the U.S. is synthesized and used to test the surface integral approach to radarclinometry. It is shown that the surface integral approach to radarclinometry possesses an inherent instability that can be avoided only if the radar reflectance function possesses a shallow slope over the range of operation and if terrain slopes are bounded to prevent their being either parallel or perpendicular to the Poynting vector of the radar irradiance. It is found that the noise associated with real SAR systems makes this instability worse. It is concluded that the value of the surface integral approach to radarclinometry shows little promise.

Description: A band ratioing method is developed which directs the retention of topographic expression and albedo information so that they remain depicted as prominent variations in image intensity. Band data are adjusted so that ratio values for each surface material coherently increase with increasing pixel bispectral radiance for all three ratios of the color composite. The retained topographic expression and albedo information do not significantly distort the ratio-enhanced band-variant reflectance information, and the resultant images are similar to chromaticity-enhanced band composite images, but require only simple arithmetic processing steps.

Description: Landsat-5 digital numbers have been used to compute the at-satellite planetary reflectance on spectrally similar zones on the Meares and Schwanda glaciers in Alaska and the Grossglockner glacier group in Austria. The patterns of TM-derived reflectances in the ablation areas of the Grossglockner glacier group and the Meares Glacier compare favorably with published reflectance curves measured on the surface of glacier ice, though the surface reflectance of snow-covered ice is higher than the Landsat-derived reflectance for the glaciers studied. The accuracy of the at-satellite planetary reflectances is shown to be affected by topographic and atmospheric effects and by the anisotropic nature of snow reflectance.

Description: A model for radiative transfer in heterogeneous three-dimensional canopies such as those found in forests is proposed. Its use in estimating important biophysical variables such as leaf area index and canopy architecture from bidirectional canopy reflectance data is discussed. The model and its use in estimating canopy parameters through its inversion are validated with measured canopy reflectance data for corn canopies.

Description: Measurements of the atmospheric effect on the spectral signature of surface cover were conducted during hazy conditions over the Chesapeake Bay and its eastern shore. In the experiment the upward radiance was measured by an airborne scanning radiometer in nine spectral bands between 465 and 773 nm, above and below the haze layer. Simultaneous measurements of the aerosol optical thickness and its vertical distribution were conducted. The results of the measurements are used to study the spectral dependence of the atmospheric effect on remote sensing of water bodies and vegetated fields (forest, corn field, and pasture), and to verify theoretical predictions. It is suggested that the radiances over dark areas (e.g., water in the near IR and forest in the visible) can be used to derive the aerosol optical thickness as is done over oceans with the CZCS satellite images. Combined with climatological information, the derived optical thickness can be used to perform corrections of the atmospheric effect. Examples of the derivation of the aerosol optical thickness and correction of the upward radiances are given.

Description: Interferometric aperture synthesis is presented as an alternative to real aperture measurements of the earth's brightness temperature from low earth orbit. The signal-to-noise performance of a single interferometric measurement is considered, and the noise characteristics of the brightness temperature image produced from the interferometer measurements are discussed. The sampling requirements of the measurements and the resulting effects of the noise in the measurements on the image are described. The specific case of the electronically steered thinned array radiometer (ESTAR) currently under construction is examined. The ESTAR prototype is described in detail sufficient to permit a performance evaluation of its spatial and temperature resolution. Critical aspects of an extension of the ESTAR sensor to a larger spaceborne system are considered. Of particular importance are the number and placement of antenna elements in the imaging array. A comparison of the implementation methodologies of radio astronomy and earth remote sensing is presented along with the effects of the source brightness distribution, the antenna array configuration and the method used for array scanning.

Description: Landsat Thematic Mapper (TM) and aircraft-borne Thematic Mapper simulator (TMS) data were collected over two areas of natural vegetation in southern California exposed to gradients of pollutant dose, particularly in photochemical oxidants: the coastal sage scrub of the Santa Monica Mountains in the Los Angeles basin, and the yellow pine forests in the southern Sierra Nevada. In both situations, natural variations in canopy closure, with subsequent exposure of understory elements (e.g.,rock or soil, chaparral, grasses, and herbs), were sufficient to cause changes in spectral variation that could obscure differences due to visible foliar injury symptoms observed in the field. TM or TMS data are therefore more likely to be successful in distinguishing pollution injury from background variation when homogeneous communities with closed canopies are subjected to more severe pollution-induced structural and/or compositional change. The present study helps to define the threshold level of vegetative injury detectable by TM data.

Description: The spectral canopy reflectance, biomass, and projected leaf-area index (LAI) of widely dispersed plots of a North American coastal plant were measured in order to study potential impacts of continental-scale environmental variability on the assumptions underlying remote vegetation analysis. Systematic changes in the canopy geometry and resultant near-infrared reflectance of this plant were noted. Mean infrared canopy reflectances of canopies in the northern half of the range were shown to nearly double those of the southern half. It is suggested that the difference results from divergent canopy morphologies, with the northern canopies presenting greater horizontally projected LAIs per unit biomass than southern canopies.

Description: Improved estimates of soil wetness were obtained using observations from both the NIMBUS-7 Scanning Multichannel Microwave Radiometer (SMMR) and the NOAA-7 Advanced Very High Resolution Radiometer (AVHRR). SMMR 66 GHz frequency, horizontal polarization, brightness temperature T(BH) was first correlated with soil wetness, as computed using an Antecedent Precipitation Index (API) model, for a number of SMMR ground resolution areas involving a fairly wide range of vegetation densities. The API generally accounted for more than 70 percent of the observed temporal variability in T(BH), with linear correlations being significant at the 1 percent level. The regression slope of T(BH) versus API correlated well, at the 1 percent level, with a vegetation index derived from AVHRR visible and near-infrared observations. The regression intercept was found to correlate less satisfactorily, but was significant at the 5 percent level. These linear regression results were used to develop a diagnostic model for soil wetness using SMMR and AVHRR data only.

Description: An algorithm for automatic atmospheric correction of satellite imagery of the earth's surface is proposed which is applicable to low-resolution and high-resolution imagery of land areas. The algorithm is based on the satellite image being corrected and on the climatology of the area, and it requires that some pixels in the image correspond to dense dark vegetation as the surface cover. The algorithm is sensitive to the assumed reflectance of the dense dark vegetation, and the accuracy of the corrected surface reflectance is expected to be + or - 0.01. Using the method, aerosol optical thicknesses were derived from clear and hazy Landsat MSS images in the Washington, D.C. and Chesapeake Bay region, and the results are found to agree well with simultaneous sunphotometer ground measurements.

Description: Nitrous oxide flux and nitrogen turnover were measured in three types of Amazonian forest ecosystems within Reserva Florestal Ducke near Manaus, Brazil. Nitrogen mineralization and nitrate production measured during 10-day laboratory incubations were 3-4 times higher in clay soils associated with 'terra firme' forests on ridge-top and slope positions than in 'campinarana' forests on bottomland sand soils. In contrast, nitrous oxide fluxes did not differ significantly among sites, but were highly variable in space and time. The observed frequency distribution of flux was positively skewed, with a mean overall sites and all sampling times of 1.3 ng N2O-N/sq cm per hr. Overall, the flux estimates were comparable to or greater than those of temperature forests, but less than others reported for Amazoonia. Results from a field fertilization experiment suggest that most nitrous oxide flux was associated with denitrification of soil nitrate.

Description: The roles of leaf anatomy, moisture and pigment content, and number of leaf layers on spectral reflectance in healthy, pollution-stressed, and water-stressed conifer needles were examined experimentally. Jeffrey pine (Pinus jeffreyi) and giant sequoia (Sequoiadendron gigantea) were exposed to ozone and acid mist treatments in fumigation chambers; red pine (Pinus resinosa) needles were artificially dried. Infrared reflectance from stacked needles rose with free water loss. In an air-drying experiment, cell volume reductions induced by loss of turgor caused near-infrared reflectance (TM band 4) to drop after most free water was lost. Under acid mist fumigation, stunting of tissue development similarly reduced band 4 reflectance. Both artificial drying and pollutant fumigation caused a blue shift of the red edge of spectral reflectance curves in conifers, attributable to chlorophyll denaturation. Thematic mapper band ratio 4/3 fell and 5/4 rose with increasing pollution stress on artificial drying. Loss of water by air-drying, freeze-drying, or oven-drying enhanced spectral features, due in part to greater scattering and reduced water absorption. Grinding of the leaf tissue further enhanced the spectral features by increasing reflecting surfaces and path length. In a leaf-stacking experiment, an asymptote in visible and infrared reflectance was reached at 7-8 needle layers of red pine.

Description: The Earth Observing System Project (EOS) program guidelines establishes significantly more stringent requirements on calibrations of instruments. This requirement is driven by the need for long-term continuity of acquired data sets and the use of measurements in interdisciplinary investigations. Personnel from the Standards and Calibration Office have been supporting the Program and Project in interpreting these goals into specific requirements. Contributions to EOS have included participation in the Panel of Experts which produced a list of consensus items necessary for accomplishing an accurate calibration and suggested EOS Project Calibration Policy, and drafting the announcement of opportunity and bidders information package positions on instrument calibration and data product validation. Technical staffing was provided to the NASA delegates to the Committee on Earth Orbiting Satellites (club of space-faring nations) for the standing working group on Calibration and Data Validation.

Description: The Incorporated Research Institutes for Seismology (IRIS) approached NASA Headquarters in 1986 about the need to collect data daily from seismic stations around the world as part of the Earth Observing System (EOS) mission. A typical IRIS Seismic Station generates 16 Megabytes of data per day when there is seismic activity. The Preliminary Design Parameters of the Wide Band Data Collection System are summarized.

Description: Geological remote sensing techniques can be used to investigate structural, depositional, and shock metamorphic effects associated with hypervelocity impact structures, some of which may be linked to global Earth system catastrophies. Although detailed laboratory and field investigations are necessary to establish conclusive evidence of an impact origin for suspected crater landforms, the synoptic perspective provided by various remote sensing systems can often serve as a pathfinder to key deposits which can then be targetted for intensive field study. In addition, remote sensing imagery can be used as a tool in the search for impact and other catastrophic explosion landforms on the basis of localized disruption and anomaly patterns. In order to reconstruct original dimensions of large, complex impact features in isolated, inaccessible regions, remote sensing imagery can be used to make preliminary estimates in the absence of field geophysical surveys. The experienced gained from two decades of planetary remote sensing of impact craters on the terrestrial planets, as well as the techniques developed for recognizing stages of degradation and initial crater morphology, can now be applied to the problem of discovering and studying eroded impact landforms on Earth. Preliminary results of remote sensing analyses of a set of terrestrial impact features in various states of degradation, geologic settings, and for a broad range of diameters and hence energies of formation are summarized. The intention is to develop a database of remote sensing signatures for catastrophic impact landforms which can then be used in EOS-era global surveys as the basis for locating the possibly hundreds of missing impact structures. In addition, refinement of initial dimensions of extremely recent structures such as Zhamanshin and Bosumtwi is an important objective in order to permit re-evaluation of global Earth system responses associated with these types of events.

Description: The HIRIS design includes 10 nm spectral bands from 0.4 to 2.5 micron at 30 m spatial resolution over a 24 or 30 km swath. This resolution allows identification of many minerals in rocks and soils, important algal pigments in oceans and inland water and spectral changes in land canopy. In the 824 km orbit altitude proposed, the cross track pointing capability allows 4 to 5 views during a 16 day revisit cycle.

Description: Sea ice remote sensing and estimation of concentrations of each of several ice types from passive microwave satellite data is described. The approach is based on the Kalman filter; it incorporates surface temperature, ice advection, and ice deformation data derived from drifting buoys and uses the whole temporal microwave record to make a smoothed estimate of ice concentration. The method allows resolution of previously ambiguous surface types. An example using time histories of two SMMR measurements to resolve the fractional areas of four surface types: open water, first-year, second-year and older multiyear ice is shown.

Description: The Alaska SAR Facility (ASF) program for the acquisition and processing of data from the ESA ERS-1, the NASDA ERS-1, and Radarsat and to carry out a program of science investigations using the data is introduced. Agreements for data acquisition and analysis are in place except for the agreement between NASA and Radarsat which is in negotiation. The ASF baseline system, consisting of the Receiving Ground System, the SAR Processor System and the Archive and Operations System, passed critical design review and is fully in implementation phase. Augments to the baseline system for systems to perform geophysical processing and for processing of J-ERS-1 optical data are in the design and implementation phase. The ASF provides a very effective vehicle with which to prepare for the Earth Observing System (EOS) in that it will aid the development of systems and technologies for handling the data volumes produced by the systems of the next decades, and it will also supply some of the data types that will be produced by EOS.

Description: Synthetic Aperture Radar (SAR) data and aerial photographs were obtained over pack ice off the East Coast of Canada in March 1987 as part of the Labrador Ice Margin Experiment (LIMEX) pilot project. Examination of this data shows that although the pack ice off the Canadian East Coast appears essentially homogeneous to visible light imagery, two clearly defined zones of ice are apparent on C-band SAR imagery. To identify factors that create the zones seen on the radar image, aerial photographs were compared to the SAR imagery. Floe size data from the aerial photographs was compared to digital number values taken from SAR imagery of the same ice. The SAR data of the inner zone acquired three days apart over the melt period was also examined. The studies indicate that the radar response is governed by floe size and meltwater distribution.

Description: To gain a better understanding of northern/boreal forest dynamics over a range of spatial and temporal scales, an approach to integrate models of forest growth, soil processes and radiative transfer with remote sensing observations was developed. The integrated model and remote sensing can be used to examine descriptors of ecosystem dynamics. To examine the scaling of vegetation pattern from the local to the regional domain, distributions of area and perimeters of vegetation community associations were determined from satellite and aircraft images. Relationships between computed fractal dimensions (1.5 to 1.8) and succession history for managed and unmanaged areas are being explored.

Description: The backscattering coefficients for black spruce and aspen at an incidence angle of 50 deg obtained using a helicopter mounted C-band scatterometer are related to leaf area index (LAI) and biomass for several dates while leaves are present. These data are compared with estimates obtained from the Fung disk model for aspen. Implications for spacecraft SAR (e.g., SIR-C) systems and their ability to determine biophysical characteristics of forest canopies are discussed. The precision of SAR data is insufficient to provide consistent tests of the relationship of LAI to the scattering coefficient for single polarizations alone. Backscatter models only provide a simulation of part of the canopy, and more attention needs to be placed on collecting field data which support tests of the microwave scattering models.

Description: The results of inferring geologic parameters such as rms surface height, correlation length, and dielectric constant of rough surfaces by fitting observed polarization signatures with those predicted by the second order Rice model are discussed. The inferred results are compared to measured values of rms height and correlation length. The rms height values inferred are in good agreement with in situ measurements. The inferred correlation lengths generally do not agree with measured values. The results allow the separation of the effects of surface roughness and dielectric constant on the overall backscatter from rough surfaces.

Description: The data for polarization phase difference Delta Phi between the HH- and VV-polarized backscattered waves from tree-covered fields were obtained with an airborne synthetic aperture radar at 1.225 GHz. The mean values over tree-covered fields were derived from the images of the phase difference and were examined as a function of incident beam angle from 15 to 55 deg. A theoretical model for simulating these data, based on the electromagnetic wave scatterings from the tree trunk and its branches, both of which are assumed as very long dielectric cylinders was developed. The radius and direction of a tree branch are taken as random variables and are chosen by a Monte Carlo method to encounter the incident waves in producing the scattering events. The Monte Carlo simulated results are in good agreement with the observations within experimental uncertainty.

Description: An airborne imaging spectrometer collected data for 128 wave length channels covering from near to short wavelength infrared across a 320 m swath, to help obtain a mineral map of an area based on reflectance spectral signatures of the area. Minerals have distinctive crystal structures and chemical contents which can be identified by their light absorption characteristics, and an optimized automatic mineral map generation procedure for imaging spectrometer data was developed. The procedure generates two types of mineral maps, a mineral distribution map showing spatial layout of various minerals and a mineral composition map showing the percentage composition of a selected mineral.

Description: The Earth Observing System (EOS) is a suite of instruments joined by a common data information system and will carry out multidisciplinary Earth science studies using a variety of remote sensing techniques. The mission is planned for the 1990's and will focus on the Earth as a system requiring measurements in the areas of hydrology, geology, forestry, meteorology, oceanography, and agriculture. Two platforms are envisioned on the U.S. side each carrying a payload of between 3500 and 4000 kgs. The European Space Agency and Japan are integrating plans for their own programs with EOS and will provide a third and fourth platform. The results of the EOS program will be applied to biogeochemistry and climate studies, and to environment management.

Description: The Microwave Limb Sounder was designed to map the concentrations of trace gases from the stratosphere to the lower thermosphere, to improve understanding of the photochemical reactions which take place in this part of the atmosphere. The instrument will measure the intensity of thermal radiation from molecules in the atmosphere at frequencies corresponding to rotational absorption bands of chlorine monoxide, ozone, and water vapor. Molecular concentration profiles will be determined over a height range of 15 to 80 km (20 to 45 km for C10). The 57 deg inclination orbit proposed for the Upper Atmosphere Research Satellite will allow global coverage.

Description: The Alaska SAR processor was designed to process over 200 100 km x 100 km (Seasat like) frames per day from the raw SAR data, at a ground resolution of 30 m x 30 m from ERS-1, J-ERS-1, and Radarsat. The near real time processor is a set of custom hardware modules operating in a pipelined architecture, controlled by a general purpose computer. Input to the processor is provided from a high density digital cassette recording of the raw data stream as received by the ground station. A two pass processing is performed. During the first pass clutter-lock and auto-focus measurements are made. The second pass uses the results to accomplish final image formation which is recorded on a high density digital cassette. The processing algorithm uses fast correlation techniques for range and azimuth compression. Radiometric compensation, interpolation and deskewing is also performed by the processor. The standard product of the ASP is a high resolution four-look image, with a low resolution (100 to 200 m) many look image provided simultaneously.

Description: In order to determine the significance of organic matter content on the microwave emissivity of soils when estimating soil moisture, field experiments were conducted in which 1.4 GHz microwave emissivity data were collected over test plots of sandy loam soil with different organic matter levels (1.8, 4.0, and 6.1 percent) for a range of soil moisture values. Analyses of the observed data show only minor variation in microwave emissivity due to a change in organic matter content at a given moisture level for soils with similar texture and structure. Predictions of microwave emissivity made using a dielectric model for aggregated soils exhibit the same trends and type of response as the measured data when appropriate values for the input parameters were utilized.

Description: The Special Sensor Microwave Imager (SSM/I) was launched as part of the Defense Meteorological Satellite Program. The SSM/I operates at 19.4, 22.2, 37.0, and 85.5 GHz with horizontal and vertical polarizations measured at each frequency except 22 GHz which has only a vertical polarization channel. Examination of polarization and spectral gradient ratios derived from the SSM/I radiances for open ocean, first-year, and multiyear Arctic sea ice reveals striking differences between the ratios calculated using lower frequencies and those ratios using the 85 GHz channels. These differences may serve as the basis for deriving sea ice information.

Description: The wave spectrum of a well developed sea is discussed. It includes a broad range of wavenumbers where the spectral density is governed by a power law of the form k sup-p. When p is less than or = 4, the surface exhibits properties, such as an increased surface number density of steep and breaking wavelet events and an increased number of specular points for vertical incidence, due to the cascade (fractal) pattern in its geometry. These properties manifest themselves in error trends in wind speed measurements by scatterometer and altimeter.

Description: Models to estimate the reflection coefficient of a statistically rough surface, for example the works of Beckmann, Smith, and Vesecky are discussed. Bistatic radar experiments carried out during the Apollo 16 mission provide a data set with which to compare theoretical models and experimental data. These bistatic S-band radar experiments provide experimental estimates of the Moon's bistatic, forward scatter, reflection coefficient for grazing angles of 2.5 to 78 deg. Theoretical expressions for the reflection coefficient are developed for comparison with these experimental data. At grazing angles below 10 deg the models of Smith and Vesecky compare favorably with the data. Beckmann's model falls significantly more rapidly with decreasing grazing angle than does the data.

Description: It is shown that high resolution imaging radar polarimeters can describe depolarization effects in great detail by measuring the complete Stokes matrix for small regions on the Earth's surface, permitting to distinguish between coherent polarization transformation by the surface and diffuse interactions that randomize the polarization state of the received wave. Multiwavelength polarimeter observations of a variety of types of terrain, including images of the coherent and diffuse parts of the received signal are presented. The diffuse image, in particular, is highly indicative of small-scale surface roughness, an effect illustrated by analyzing a set of polarimeter images acquired over lava fields of varying roughness.

Description: Image data from synthetic aperture radar (SAR) are used to observe an ice compaction event off the East Coast of Newfoundland in spring, 1987. The information developed from sequential SAR observations is shown to do a remarkably effective job of describing the ice conditions; the difficult variable is the ice thickness which is found to be surprisingly large (2 to 4 times the thickness predictable from thermodynamic growth alone). It may be possible to model the ice thickness using SAR-derived ice motion.

Description: A mathematical model of transient seas modulated by coherent swells is developed as a Rayleigh-Poisson random process subject to deterministic correlations of scattering sites, as they appear in a time window defined by a SAR's range-Doppler measurements of the surface coordinates. This model of SAR response to sea surface dynamics is discussed as a Fourier domain predictor/corrector of a dynamic motion blur.

Description: The Procedure for Interactive Pyramid Segementation was designed to identify regions of spatially connected and spectrally homogeneous pixels in multispectral image data, and to allow these regions to be interactively manipulated without the use of processing parameters. The objective is to provide the user with the capability to easily extract and identify regions corresponding to target objects of interest. The approach is to segment a multispectral image into a set of regions and to allow the analyst to interactively refine the segmentation by direct manipulation. The user can elect to: interactively display maps of the spatial distribution of regions for any designated image subset; display the statistics of a given region; and label, merge, or split regions.

Description: The Pilot Land Data System being developed to address the information processing needs of the NASA land sciences research community is presented. The objective of the pilot program is to establish a limited-scale, distributed information system for the archival, location, transfer, integration, and manipulation of data across multiple sites connected by a high-speed communications network. Functional capabilities required for users to create, access, and maintain local and distributed data bases containing various types of data in support of land sciences research are summarized.

Description: Point-spread functions (PSF) comparisons were made between the Modular Optoelectronic Multispectral Scanner (MOMS-01), the LANDSAT Thematic Mapper (TM) and the SPOT-HRV instruments, principally near Lake Nakuru, Kenya. The results, expressed in terms of the width of the point spread functions at the 50 percent power points as determined from the in-scene analysis show that the TM has a PSF equal to or narrower than the MOMS-01 instrument (50 to 55 for the TM versus 50 to 68 for the MOMS). The SPOT estimates of the PSF range from 36 to 40. When the MOMS results are adjusted for differences in edge scanning as compared to the TM and SPOT, they are nearer 40 in the 575 to 625 nm band.

Description: Variations in the thermal infrared (TIR) spectral response of silicate rocks is related to changes in the structures and divalent cation contents of the minerals which form the rocks. These considerations lead to a chemical parameter, SCFM, which reflects mineral structures, rock types, and their spectra. The parameter is the ratio of silica to the abundance of depolymerizing cations, defined as SCFM = SiO2/SiO2 + CaO + MgO + FeO. Parameter SCFM is therefore proposed for use in TIR remote sensing of igneous rocks. It is also demonstrated that two or three broad bands are sufficient for distinguishing among major rock types and the system noise has little effect on the quality of the results. These factors can be traded off against improved spatial resolution in instrument design.

Description: A method to derive a ground reflectance scene from space imagery by removing the contribution of atmospheric radiance was developed. The method utilizes a multiple scattering radiative transfer code to model the Earth-atmosphere system and converts the output into a set of quadratic coefficients which best fit the relationships between the upwelling radiance reaching the sensor and the lower boundary conditions of the ground reflectance. Pixel by pixel correction of the atmospheric effects is done by invoking these coefficients. The algorithm was applied to a number of Thematic Mapper and CZCS data to generate interesting ground scenes and was used to simulate space imagery from ground reflectance scenes.

Description: Three dimensional radiative transfer theory was applied to computation of atmospheric effects on remotely sensed imagery. The atmospheric correction algorithm derived is used to estimate aerosol opacity.

Description: A tropospheric water vapor profiling system is presented. The hardware consists of an upward looking radiometer (CORRAD) deployed at ground level. The CORRAD measures the autocorrelation of the downwelling thermal emission from the atmosphere over a passband of 20.5 to 23.5 GHz out to a maximum time delay of 6.1 ns. This produces 100 MHz resolution imaging of the complete emission spectrum about the 22.235 GHz water vapor resonance line. The 31 equivalent frequency channels produced by Fourier transformation of the data provide additional constraints on the inversion process required to estimate the water vapor profile, as compared to standard 2 to 5 frequency channel profiling systems. The CORRAD hardware is described, and radiometer and radiosonde profiles are compared.

Description: In order to understand L-band multipolarization radar measurements of forested areas, a model for the forest polarization signature was developed. The model is based on backscatter from dielectric cylinders which represent branches and trunks. In the model the Stokes matrices corresponding to several different scattering mechanisms is calculated, combining the results to get the total Stokes matrix. Comparison of model predictions with radar measurements shows that the model can accurately predict the forest polarization signature.

Description: Winter measurements of the properties of young snow-covered fast ice are input into a mixture model to calculate the complex dielectric constant. Large changes in the electromagnetic properties of the medium occur over the 46 day period of measurements. This early evolution of the surface is shown to have an important impact upon predicted radar backscattering properties at GHz frequencies. This has consequences for the unambiguous identification of young ice forms from synthetic aperture or side-looking airborne radar images.

Description: Implications for SIR-C and Magellan of Seasat, SIR-A/B, and aircraft radar images which show that a variety of geologic targets can have similar backscatter and be indistinguishable under given observing wavelengths and/or look angles are discussed. The SIR-C/X-SAR combination provides three wavelengths, each of which may provide significant information not provided by another, and HH, VV, and one cross polarization each provide different and significant information. For study of unvegetated geological targets in relatively flat terrain, images made at smaller look angles probably provide more information than images from larger look angles. For Magellan, the possible existence of aeolian landforms such as sand dunes or sand sheets on Venus cannot be ruled out simply because they are not seen on radar images. The problem of dissimilar features having identical backscatter must also be considered in the Venusian context, where perhaps lava flows and impact ejecta could have similar high backscatter, or conversely, smooth aeolian materials and smooth volcanic ash (if either exist) could have a similar backscatter.

Description: The determination of functional and performance requirements of a workstation specifically directed toward scientific users of the proposed NASA Earth Observing System information system is discussed. Image processing, user interface; data product visualization; and text processing are considered.

Description: Microwave radiometric measurements made from an aircraft altitude of 20 km at 183.3 + or - 2, 183.3 + or - 5, and 183.3 + or - GHz, and at 92 GHz were used to retrieve the atmospheric water vapor profiles. Retrieval techniques shown to function properly in cloudfree conditions, were improved and extended to profile water vapor under moderate cloud cover conditions. The retrieved water vapor profiles compare favorably with those of rawinsonde observations at times nearly concurrent with the radiometric measurements.

Description: The NIMBUS-7 scanning multichannel microwave radiometer measured brightness temperatures at 5 frequencies (6.6, 10.7, 18, 21, 37 GHz), all dual-polarized with a 50 deg incidence angle over Africa since 1978. A 3 yr data set is being processed (1983 to 1985), and a theoretical model was developed, allowing investigation of the microwave emissivity of land features in the frequency range 6.6 to 37 GHz and of the extent to which vegetation and roughness can be determined in order to improve the soil moisture estimation.

Description: The inflight radiometric performance of AVIRIS is presented together with a comparison of methods of recovering surface spectral reflectance from the data. Performance is evaluated by comparing radiance predicted from AVIRIS with radiance generated from the LOWIRAN 6 atmospheric model and measured surface reflectance. Comparisons show apparent agreement to within a few percent between 1800 and 2450 nm. Between 600 and 1800 nm the response of AVIRIS is systematically low by as much as 70 percent, and between 400 and 600 nm it is higher than expected. These problems are traced to thermal distortions of the instrument, and to detachment during flight of optical fibers connecting foreoptics to two of four spectrometers in the instrument. Of three methods studied, an empirical one involving calibration curves constructed from field reflectance measurements returns accurate predictions of the surface reflectance independent of the actual radiometric significance of the flight data.

Description: A model, dubbed TRIM, for the interaction of electromagnetic radiation with inhomogeneous vegetation canopies is presented. It is based on the four flux theory for homogeneous canopies. The canopy is assumed to consist of ellipsoidal subcanopies located on the ground at periodic intervals. The model is inverted with field measured data for reflectance from corn canopies in the near infrared region. It is shown that TRIM correctly identifies the architecture of the canopy (homogeneous or row canopy, percentage of ground cover) and gives a good estimate of leaf area index.

Description: A radiative transfer model for the bidirectional reflectance-distribution function (BRDF) shows that snow is moderately anisotropic in the near-infrared wavelengths. Although the directional-hemispherical albedo of snow decreases as the grains become larger, the forward scattering also increases, with the result that the illumination and viewing geometry must be considered when interpreting physical properties of the surface layer of the snow pack from remote sensing data. Measurements of the BRDF for a variety of snow conditions were made throughout the winter and spring seasons with a spectroradiometer, for wavelengths from 0.38 to 1.11 microns. Coincident with these the surface grain properties were analyzed by stereological methods. The data show that Mie scattering calculations using an equivalent spherical radius match the directional-hemispherical reflectance, but the BRDF usually shows a small peak in the backscattered direction that would not occur from spherical grains. The sphere with the same surface-to-volume ratio as the ice grains is used as the equivalent sphere.

Description: Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data of the Mountain Pass, California carbonatite complex were examined to evaluate the AVIRIS instrument performance and to explore alternative methods of data calibration. Although signal-to-noise estimates derived from the data indicated that the A, B, and C spectrometers generally met the original instrument design objectives, the S/N performance of the D spectrometer was below expectations. Signal-to-noise values of 20 to 1 or lower were typical of the D spectrometer and several detectors in the D spectrometer array were shown to have poor electronic stability. The AVIRIS data also exhibited periodic noise, and were occasionally subject to abrupt dark current offsets. Despite these limitations, a number of mineral absorption bands, including CO3, Al-OH, and unusual rare earth element bands, were observed for mine areas near the main carbonatite body. To discern these bands, two different calibration procedures were applied to remove atmospheric and solar components from the remote sensing data. The two procedures, referred to as the single spectrum and the flat field calibration methods gave distinctly different results. In principle, the single spectrum method should be more accurate; however, additional fieldwork is needed to rigorously determine the degree of calibration success.

Description: Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) data were acquired over the Goldfield Mining District, Nevada, in September 1987. Goldfield is one of the group of large epithermal precious metal deposits in Tertiary volcanic rocks, associated with silicic volcanism and caldera formation. Hydrothermal alteration consists of silicification along fractures, advanced agrillic and argillic zones further away from veins and more widespread propylitic zones. An evaluation of AVIRIS data quality was performed. Faults in the data, related to engineering problems and a different behavior of the instrument while on-board the U2, were encountered. Consequently, a decision was made to use raw data and correct them only for dark current variations and detector read-out-delays. New software was written to that effect. Atmospheric correction was performed using the flat field correction technique. Analysis of the data was then performed to extract spectral information, mainly concentrating on the 2 to 2.45 micron window, as the alteration minerals of interest have their distinctive spectral reflectance features in this region. Principally kaolinite and alunite spectra were clearly obtained. Mapping of the different minerals and alteration zones was attempted using ratios and clustering techniques. Poor signal-to-noise performance of the instrument and the lack of appropriate software prevented the production of an alteration map of the area. Spectra extracted locally from the AVIRIS data were checked in the field by collecting representative samples of the outcrops.

Description: The Kings-Kaweah ophiolite melange in east-central California is thought to be an obducted oceanic fracture zone and provides the rare opportunity to examine in detail the complex nature of this type of terrain. It is anticipated that the distribution and abundance of components in the melange can be used to determine the relative importance of geologic processes responsible for the formation of fracture zone crust. Laboratory reflectance spectra of field samples indicate that the melange components have distinct, diagnostic absorptions at visible to near-infrared wavelengths. The spatial and spectral resolution of AVIRIS is ideally suited for addressing important scientific questions concerning the Kings-Kaweah ophiolite melange and fracture zones in general.

Description: Spectral data gathered by the AVIRIS from wetlands in the Suisun Bay area of California on 13 October 1987 were analyzed. Spectra representing stands of numerous vegetation types (including Sesuvium verrucosum, Scirpus acutus and Scirpus californicus, Xanthium strumarium, Cynadon dactylon, and Distichlis spicata) and soil were isolated. Despite some defects in the data, it was possible to detect vegetation features such as differences in the location of the chlorophyll red absorption maximum. Also, differences in cover type spectra were evident in other spectral regions. It was not possible to determine if the observed features represent noise, variability in canopy architecture, or chemical constituents of leaves.

Description: An assessment of AVIRIS data quality for studying coniferous canopy chemistry was made. Seven flightlines of AVIRIS data were acquired over a transect of coniferous forest sites in central Oregon. Both geometric and radiometric properties of the data were examined including: pixel size, swath width, spectral position and signal-to-noise ratio. A flat-field correction was applied to AVIRIS data from a coniferous forest site. Future work with this data set will exclude data from spectrometers C and D due to low signal-to-noise ratios. Data from spectrometers A and B will be used to examine the relationship between the canopy chemical composition of the forest sites and AVIRIS spectral response.

Description: Equations for converting AVIRIS digital numbers to percent reflectance were developed using a set of three calibration targets. AVIRIS reflectance spectra from five plant communities exhibit distinct spectral differences.

Description: Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were acquired from the Bishop, CA area, located at the northern end of the Owens Valley, on July 30, 1987. Radiometrically-corrected AVIRIS data were flat-field corrected, and spectral curves produced and analyzed for pixels taken from both native and cultivated vegetation sites, using the JPS SPAM software program and PC-based spreadsheet programs. Analyses focussed on the chlorophyll well and red edge portions of the spectral curves. Results include the following: AVIRIS spectral data are acquired at sufficient spectral resolution to allow detection of blue shifts of both the chlorophyll well and red edge in moisture-stressed vegetation when compared with non-stressed vegetation; a normalization of selected parameters (chlorophyll well and near infrared shoulder) may be used to emphasize the shift in red edge position; and the presence of the red edge in AVIRIS spectral curves may be useful in detecting small amounts (20 to 30 pct cover) of semi-arid and arid vegetation ground cover. A discussion of possible causes of AVIRIS red edge shifts in respsonse to stress is presented.

Description: Automated techniques were developed for the extraction and characterization of absorption features from reflectance spectra. The absorption feature extraction algorithms were successfully tested on laboratory, field, and aircraft imaging spectrometer data. A suite of laboratory spectra of the most common minerals was analyzed and absorption band characteristics tabulated. A prototype expert system was designed, implemented, and successfully tested to allow identification of minerals based on the extracted absorption band characteristics. AVIRIS spectra for a site in the northern Grapevine Mountains, Nevada, have been characterized and the minerals sericite (fine grained muscovite) and dolomite were identified. The minerals kaolinite, alunite, and buddingtonite were identified and mapped for a site at Cuprite, Nevada, using the feature extraction algorithms on the new Geophysical and Environmental Research 64 channel imaging spectrometer (GERIS) data. The feature extraction routines (written in FORTRAN and C) were interfaced to the expert system (written in PROLOG) to allow both efficient processing of numerical data and logical spectrum analysis.

Description: Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data for sites in Nevada and Colorado were evaluated to determine their utility for mineralogical mapping in support of geologic investigations. Equal energy normalization is commonly used with imaging spectrometer data to reduce albedo effects. Spectra, profiles, and stacked, color-coded spectra were extracted from the AVIRIS data using an interactive analysis program (QLook) and these derivative data were compared to Airborne Imaging Spectrometer (AIS) results, field and laboratory spectra, and geologic maps. A feature extraction algorithm was used to extract and characterize absorption features from AVIRIS and laboratory spectra, allowing direct comparison of the position and shape of absorption features. Both muscovite and carbonate spectra were identified in the Nevada AVIRIS data by comparison with laboratory and AIS spectra, and an image was made that showed the distribution of these minerals for the entire site. Additional, distinctive spectra were located for an unknown mineral. For the two Colorado sites, the signal-to-noise problem was significantly worse and attempts to extract meaningful spectra were unsuccessful. Problems with the Colorado AVIRIS data were accentuated by the IAR reflectance technique because of moderate vegetation cover. Improved signal-to-noise and alternative calibration procedures will be required to produce satisfactory reflectance spectra from these data. Although the AVIRIS data were useful for mapping strong mineral absorption features and producing mineral maps at the Nevada site, it is clear that significant improvements to the instrument performance are required before AVIRIS will be an operational instrument.

Description: Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were obtained over Cripple Creek and Canon City Colorado on October 19, 1987 at local noon. Multiple ground calibration sites were measured within both areas with a field spectrometer and samples were returned to the laboratory for more detailed spectral characterization. The data were used to calibrate the AVIRIS data to ground reflectance. Once calibrated, selected spectra in the image were extracted and examined, and the signal to noise performance was computed. Images of band depth selected to be diagnostic of the presence of certain minerals and vegetation were computed. The AVIRIS data were extremely noisy, but images showing the presence of goethite, kaolinite and lodgepole pine trees agree with ground checks of the area.

Description: An assessment of the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) performance was made for a flight over Mountain Pass, California, July 30, 1987. The flight data were reduced to reflectance using an empirical algorithm which compensates for solar, atmospheric and instrument factors. AVIRIS data in conjunction with surface and atmospheric measurements acquired concurrently were used to develop an improved spectral calibration. An accurate in-flight radiometric calibration was also performed using the LOWTRAN 7 radiative transfer code together with measured surface reflectance and atmospheric optical depths. A direct comparison with coincident Thematic Mapper imagery of Mountain Pass was used to demonstrate the high spatial resolution and good geometric performance of AVIRIS. The in-flight instrument noise was independently determined with two methods which showed good agreement. A signal-to-noise ratio was calculated using data from a uniform playa. This ratio was scaled to the AVIRIS reference radiance model, which provided a basis for comparison with laboratory and other in-flight signal-to-noise determinations.

Description: Data from several AVIRIS flight lines were examined to assess instrument stability and response. Both scene and in-flight calibration data were analyzed statistically. The data clearly indicates that, although the instrument output was noisy and unstable at the time of the data acquisition, valuable spectral signatures can still be extracted and analyzed. Some first order calibration corrections can be performed by forcing internal consistency within the data. AVIRIS data are delivered in band-interleaved-by-line format, but high efficiency routines were developed which access the data as either image or spectral planes and enable effective statistical and visual examination of both AVIRIS scenes and ancillary files. Two methods were used to extract spectral information from segment 4 of the Kelso Dunes flight. Both successfully identified at least three distinct spectral signatures, but neither has positively identified a specific material.

Description: Observations are given of the spatial variation of atmospheric precipitable water using the Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) over a desert area in eastern California, derived using a band ratio method and the 940 nm atmospheric water band and 870 nm continuum radiances. The ratios yield total path water from curves of growth supplied by the LOWTRAN 7 atmospheric model. An independent validation of the AVIRIS-derived column abundance at a point is supplied by a spectral hygrometer calibrated with respect to radiosonde observations. Water values conform to topography and fall off with surface elevation. The edge of the water vapor boundary layer defined by topography is thought to have been recovered. The ratio method yields column abundance estimates of good precision and high spatial resolution.

Description: Results are presented of the assessment of AVIRIS performance during the 1987 flight season by the AVIRIS project and the earth scientists who were chartered by NASA to conduct an independent data quality and sensor performance evaluation. The AVIRIS evaluation program began in late June 1987 with the sensor meeting most of its design requirements except for signal-to-noise ratio in the fourth spectrometer, which was about half of the required level. Several events related to parts failures and design flaws further reduced sensor performance over the flight season. Substantial agreement was found between the assessments by the project and the independent investigators of the effects of these various factors. A summary of the engineering work that is being done to raise AVIRIS performance to its required level is given. In spite of degrading data quality over the flight season, several exciting scientific results were obtained from the data. These include the mapping of the spatial variation of atmospheric precipitable water, detection of environmentally-induced shifts in the spectral red edge of stressed vegetation, detection of spectral features related to pigment, leaf water and ligno-cellulose absorptions in plants, and the identification of many diagnostic mineral absorption features in a variety of geological settings.

Description: Agriculture Multiband Experiment Radiometer (Amber) was designed and built in 1979 to 1980 and deployed in 1981. Amber was designed to simultaneously measure sunlight reflected from vegetation in 15 optical bands. In 1982, program interest shifted from ground truth to satellite image reduction and Amber was retired. Early in 1987, the project scientists concluded that Amber, because of its 15 simple and independent optical systems, would be ideally suited to study polarized light. Changes were made to add polarimeter capability to the instrument. The changes are listed and briefly discussed.

Description: Knowledge of soil moisture is important to many disciplines, such as agriculture, hydrology, and meteorology. Soil moisture distribution of vast regions can be measured efficiently only with remote sensing techniques from airborne or satellite platforms. At low microwave frequencies, water has a much larger dielectric constant than dry soil. This difference manifests itself in surface emissivity (or reflectivity) change between dry and wet soils, and can be measured by a microwave radiometer or radar. The Microwave Sensors and Data Communications Branch is developing microwave remote sensing techniques using both radar and radiometry, but primarily with microwave radiometry. The efforts in these areas range from developing algorithms for data interpretation to conducting feasibility studies for space systems, with a primary goal of developing a microwave radiometer for soil moisture measurement from satellites, such as EOS or the Space Station. These efforts are listed.

Description: Research is being conducted on microwave scattering from vegetation. The objective is to develop techniques for measuring parameters of the vegetation canopy (such as biomass) needed for understanding global biogeochemical cycles and to develop techniques for correcting microwave measurements of soil moisture for the effects of the vegetation canopy. Measurements of vegetation and soil moisture are important for understanding the environment on a global scale. For example, moisture in the soil is an important, highly variable, element in the global hydrologic cycle. The hydrologic cycle, in turn, is strongly coupled to weather and climate through moisture (and energy) fluxes at the surface. The amount and distribution of vegetation is an important element in biogeochemical cycles; and knowledge of both the vegetation canopy and soil moisture is of practical importance in agricultural management. These theories are examined.

Description: PHOTONS (Photometric Thermospheric Oxygen Nightglow Study) is an optical remote sensing payload developed for Get Away Special (GAS) flight by the National Research Council of Canada. The device is extremely sensitive and is suitable for making measurements of low intensity, aeronomically generated atmospheric emissions in the nadir and the limb and of Shuttle ram glow. The unit uses a sealed canister and UV transmitting viewing ports. During the flight of STS 61-C, PHOTONS received one hour of operation and aeronomic observations were made. Good diagnostic data were obtained and the science part of the experiment malfunctioned. Post flight inspection revealed that the payload was in perfect working order except for total failure of the photomultiplier detectors. The experiment and the payload are described and the flight results are discussed along with the cause of the malfunctions. It is shown that enough was learned from the flight diagnostic data and about the cause of the malfunction to conclude that the engineering flight was successful and that subsequent flight of the PHOTONS payload will be productive.

Description: Planet X Probe utilizes a Get Away Special (GAS) payload to provide a large student population with a remote Earth sensing experimental package. To provide a cooperative as well as a competitive environment, the effort is targeted at all grade levels and at schools in different geographical regions. LANDSAT capability allows students to investigate the Earth, its physical makeup, its resources, and the impact of man. This project also serves as an educational device to get students to stand back and take a fresh look at their home planet. The key element is to treat the familiar Earth as an unknown planet with knowledge based only on what is observable and provable from the images obtained. Through participation, a whole range of experiences will include: (1) mission planning; (2) research and pilot projects to train teams; (3) identification and recruitment of scientific mentors and dialogue; (4) selection of a student advisory team to be available during the mission; (5) analysis of data and compilation of findings; (6) report preparation, constucted along sound scientific principles; and (7) presentation and defense of findings before a meeting of competitive student groups and scientist in the field.

Description: The use of a query language processor for decision support of cross-country movement in an image-based geographic information system is evaluated. It is found that query processing yields results which are comparable to those obtained using conventional cross-country movement techniques and analysis. Query processing also provides a flexibility of information extraction, rapid display, and flexible decision support in time-critical, limited data situations.

Description: The chemical content of dry, ground leaf material sampled from deciduous and conifer tree species from sites in Alaska, Wisconsin, and California was estimated using visible and shortwave IR spectroscopy. Seven chemical components - sugar, starch, protein, cellulose, total chlorophyll, lignin, and total nitrogen - were analyzed by wet chemical methods and their concentrations regressed against log 1/rho and first and second differences of log 1/rho (where rho is measured reflectance) at wavelengths selected by stepwise regression. Predictions of chemical concentrations based on cross validation suggest that this technique may be useful for extracting vegetation canopy biochemical information by remote sensing.

Description: The authors have developed several techniques to analyze polarimetric radar data from the NASA/JPL airborne SAR for earth science applications. The techniques determine the heterogeneity of scatterers with subregions, optimize the return power from these areas, and identify probable scattering mechanisms for each pixel in a radar image. These techniques are applied to the discrimination and characterization of geologic surfaces and vegetation cover, and it is found that their utility varies depending on the terrain type. It is concluded that there are several classes of problems amenable to single-frequency polarimetric data analysis, including characterization of surface roughness and vegetation structure, and estimation of vegetation density. Polarimetric radar remote sensing can thus be a useful tool for monitoring a set of earth science parameters.

Description: The use of images acquired by the Airborne Imaging Spectrometer, an experimental high-spectral resolution imaging sensor developed by NASA, to estimate the lignin concentration of whole forest canopies in Wisconsin is reported. The observed strong relationship between canopy lignin concentration and nitrogen availability in seven undisturbed forest ecosystems on Blackhawk Island, Wisconsin, suggests that canopy lignin may serve as an index for site nitrogen status. This predictive relationship presents the opportunity to estimate nitrogen-cycling rates across forested landscapes through remote sensing.

Description: A simulated data set was used to evaluate techniques for extracting topography from side-looking satellite systems for an area of northwest Washington state. A negative transparency orthophotoquad was digitized at a spacing of 85 microns, resulting in an equivalent ground distance of 9.86 m between pixels and a radiometric resolution of 256 levels. A bilinear interpolation was performed on digital elevation model data to generate elevation data at a 9.86-m resolution. The nominal orbital characteristics and geometry of the SPOT satellite were convoluted with the data to produce simulated panchromatic HRV digital stereo imagery for three different orbital paths and techniques for reconstructing topographic data were developed. Analyses with the simulated HRV data and other data sets show that the method is effective.

Description: The present model envisions the heat balance of a homogeneous land surface in terms of available energy, a set of driving potentials, and parameters for the physical state of the soil and vegetation. Two unique features of the model are: (1) the expression of the interaction of evaporation from the soil and from foliage by changes in the value of the saturation vapor pressure deficit of air in the canopy (the conclusions of this interaction being consistent with field observations); and (2) the treatment of sensible and latent heat exchange between the atmosphere and a soil consisting of two discrete layers.

Description: Biomass combustion plays an important role in the earth's biogeochemical cycling. The monitoring of wildfires and their associated variables at global scales is feasible and can lead to predictions of the influence of combustion on biogeochemical cycling and tropospheric chemistry. Remote sensing data collected during the 1985 California wildfire season indicate that the information content of key thermal and infrared/thermal wave band channels centered at 11.5 microns, 3.8 microns, and 2.25 microns are invaluable for discriminating and calculating fire related variables. These variables include fire intensity, rate-of-spread, soil cooling recovery behind the fire front, and plume structure. Coinciding Advanced Very High Resolution Radiometer (AVHRR) data provided information regarding temperature estimations and the movement of the smoke plume from one wildfire into the Los Angeles basin.