ALBERT

Description: In recent decades, geological modeling has significantly evolved, relying on the growing potential of hardware and software to manage and integrate vast datasets of 2D-3D geophysical underground data. Therefore, digitization and integration with other forms of data can often improve understanding of geological systems, even when using so-called vintage or historical data. Seismic reflection data have been extensively acquired mainly for hydrocarbon exploration since the 60s generating large volumes of data. Typically, these data have been for private commercial use and are relatively unavailable for research. However, with time, large volumes of vintage seismic reflection data in many countries worldwide are now becoming publicly available through time-based de-classification schemes. Such data have a great potential for modern-day geo-research, unleashing opportunities to improve geological understanding through re-interpretation with modern methods. However, a downside of these vintage data is that they are often only available in analog (paper, raster) format. The vectorization of these data then constitutes an essential step for unlocking their research potential. In 2018 INGV established the SISMOLAB-3D infrastructure, which is mainly devoted to analyzing digital subsurface data, such as seismic reflection profiles and well-logs, to build 2D-3D geological models, principally for seismotectonics, seismic hazard assessment, and geo-resources applications. In this contribution, we discuss the robustness of the WIGGLE2SEGY code, firstly published by Sopher in 2018, focusing on examples from different tectonic and geodynamic contexts within Italian territory. We applied the SEG-Y conversion method to onshore and offshore raster seismic profiles related to ceased exploration permits, comparing the results with other published archives of SEG-Y data obtained from the conversion of vintage data. Such an approach results in digital SEG-Y files with unprecedented quality and detail. The systematic application of this method will allow the construction of a comprehensive dataset of digital SEG-Y seismic profiles across Italy, thereby expanding and sharing the INGV SISMOLAB-3D portfolio with the scientific community to foster innovative and advanced scientific analysis.

Description: Published

Description: DM538

Description: 1TR. Georisorse

Description: 2TR. Ricostruzione e modellazione della struttura crostale

Description: 2IT. Laboratori analitici e sperimentali

Description: JCR Journal

Description: Southwestern Sicily is an area of infrequent seismic activity; however, some studies carried out in the archaeological Selinunte site suggest that, between the fourth century BC and the early Middle Ages, probably at least two earthquakes strucked this area with enough energy to damage and cause the collapse and kinematics of much of the architecture of Selinunte. Take into account that, in 2008, a noninvasive archaeological prospection and traditional data gathering methods along the Acropolis north fortifications were carried out. Following these first studies, after about 10 years, a new geophysical campaign was carried out. This second campaign benefited from the application of modern technologies for the acquisition and processing of the point cloud data on the northern part of the Acropolis, like terrestrial laser scanning and unmanned aerial vehicle photogrammetry. In this paper, we present the application of these techniques and a strategy for their integration for the 3D modelling of buildings and cultural heritages. We show how the integration of data acquired independently by these two techniques is an added value able to overcome the intrinsic limits of the individual techniques. The application to Selinunte's Acropolis allowed it to highlight and measure with high accuracy fractures, dislocation, inclinations of walls, depressions of some areas and other interesting observations, which may be important starting points for future investigations.

Description: Published

Description: 153-165

Description: 2IT. Laboratori analitici e sperimentali

Description: JCR Journal

Description: Monitoring of hydrothermal fluid emissions can provide detailed information about convective upwelling of geothermal fluids and their geochemical characteristics, as a function of tectonic stress or deeper gas input. In particular, at the Salinelle of Mt. Etna Geosite (Paternò and Belpasso, Eastern Sicily) natural emissions mainly consist of a fluid phase made of salty water, mud, gas and liquid hydrocarbons from an admixture of magmatic and hydrothermal gases. In this framework, our study mainly focused on the thermal and geochemical monitoring of hydrothermal fluids of the most active site, Salinelle dei Cappuccini. Nearby hydrothermal vents (Salinelle del Fiume; Salinelle di San Biagio), were also investigated. Analysis of the magnitude and frequency of seismic events all around Mt. Etna were conducted as well. Analysis of daily temperatures showed a constant trend: higher values (〉 35° C) within the first monitoring period, followed by a strong decrease (down to 9° C), and a new gradual increase over the following months. This trend seems to be linked to magmatic processes occurring at depth below Mt. Etna, and could lead to a modification of the geochemical and thermal characteristics of the fluids issuing at the mud-pools and gas vents of Salinelle. The higher the frequency of seismic events corresponding to higher daily energy released, the higher fluid temperatures observed. Understanding how these fluids blend and what is their relationship with Mt. Etna volcanism can be of great importance in forecasting new eruptive cycles in the case they precede changes in volcanic activity.

Description: Published

Description: GD670

Description: 7A. Geofisica per il monitoraggio ambientale

Description: JCR Journal

Description: The response of continental forelands to subduction and collision is a widely investigated topic in geodynamics. The deformation occurring within a foreland shared by two opposite‐verging chains, however, is uncommon and poorly understood. The Apulia Swell in the southern end of the Adria microplate (Africa‐Europe plate boundary, central Mediterranean Sea) represents one of these cases, as it is the common foreland of the SW verging Albanides‐Hellenides and the NE verging Southern Apennines merging into the SSE verging Calabrian Arc. We investigated the internal deformation of the Apulia Swell using multiscale geophysical data: multichannel seismic profiles recording up to 12‐s two‐way time (TWT) for a consistent image of the upper crust; high‐resolution multichannel seismic profiles, high‐resolution multibeam bathymetry, and CHIRP profiles acquired by R/V OGS Explora to constrain the Quaternary geological record. The results of our analyses characterize the geometry of the South Apulia Fault System (SAFS), a 100‐km‐long and 12‐km‐wide structure attesting an extensional (and possibly transtensional) response of the foreland to the two contractional fronts. The SAFS consists of two NW‐SE right‐stepping master faults and several secondary structures. The SAFS activity spans from the Early Pleistocene through the Holocene, as testified by the bathymetric and high‐resolution seismic data, with long‐term slip rates in the range of 0.2–0.4 mm/yr. Considering the position within an area with few or none other active faults in the surroundings, the dimension, and the activity rates, the SAFS can be a candidate causative fault of the 20 February 1743, M 6.7, earthquake.

Description: Italian Ministry for Education, University, and Research (MIUR), Premiale 2014 D. M. 291 03/05/2016.

Description: Published

Description: e2020TC006116

Description: 2T. Deformazione crostale attiva

Description: 2TR. Ricostruzione e modellazione della struttura crostale

Description: JCR Journal

Description: Over fifty eruptive episodes with Strombolian activity, lava fountains, and lava flows occurred at Mt Etna volcano between 2006 and 2013. Namely, there were seven paroxysmal lava fountains at the South-East Crater in 2007-2008 and 46 at the New South-East Crater between 2011 and 2013. Lava emissions lasting months affected the upper eastern flank of the volcano in 2006 and 2008-2009. Effective monitoring and forecast of such volcanic phenomena are particularly relevant for their potential socio-economic impact in densely populated regions like Catania and its surroundings. For example, explosive activity has often formed thick ash clouds with widespread tephra fall able to disrupt the air traffic, as well as to cause severe problems at infrastructures, such as highways and roads. Timely information about changes in the state of the volcano and possible onset of dangerous eruptive phenomena requires efficacious surveillance methods. The analysis of the continuous background seismic signal, the so-called volcanic tremor, turned out of paramount importance to follow the evolution of volcanic activity [e.g., Alparone et al., 2003; Falsaperla et al., 2005]. Changes in the state of the volcano as well as in its eruptive style are usually concurrent with variations of the spectral characteristics (amplitude and frequency) of tremor. The huge amount of digital data continuously acquired by INGV’s broadband seismic stations every day makes a manual analysis difficult. In order to tackle this problem, techniques of automatic classification of the tremor signal are applied. In a comparative study, the robustness of different methods for the identification of regimes in volcanic activity were examined [Langer et al., 2009]. In particular, Langer et al. [2011] applied unsupervised classification techniques to the tremor data recorded at one station during seven paroxysmal episodes in 2007-2008. Their results revealed significant changes in the pattern classification well before the onset of the eruptive episodes. This evidence led to the development of specific software packages, such as the program KKAnalysis [Messina and Langer, 2011], a software that combines an unsupervised classification method (Kohonen Maps) with fuzzy cluster analysis. The operational characteristics of these tools - fail-safe, robustness with respect to noise and data outages, as well as computational efficiency - allowed on-line processing at the operative centre of the INGV-Osservatorio Etneo in 2010 and the identification of criteria for automatic alarm flagging. The system is hitherto one of the main automatic alerting tools to identify impending eruptive events at Etna. The software carries out the on-line processing of the new data stream coming from two seismic stations, merged with reference datasets of past eruptive episodes. In doing so, results obtained for new data are immediately compared to previous eruptive scenarios. Given the rich material collected in recent years, we are able to apply the alert system to eleven stations at different elevations (1200-3050 m) and distances (1-8 km) from the summit craters. Critical alert parameters were empirically defined to obtain an optimal tuning of the alert system for each station. To verify the robustness of this new, multistation alert system, a dataset encompassing about eight years of continuous seismic records (since 2006) was processed automatically using KKAnalysis and collateral software off-line. Then, we analyzed the performance of the classifier in terms of timing and spatial distribution of the stations. We also investigated the performance of the new alert system based on KKAnalysis in case of activation of whatever eruptive centre. Intriguing results were obtained in 2010 throughout periods characterized by the renewal of volcanic activity at Bocca Nuova-Voragine and North-East Crater, and in the absence of paroxysmal phenomena at South-East Crater and New South-East Crater. Despite the low-energy phenomena reported by volcanologists (i.e., degassing, low-to moderate explosions), the triggered alarms demonstrate the robustness of the classifier and its potential: i) to identify even subtle changes within the volcanic system using tremor, and ii) to highlight the activation of a single eruptive centre, even though different from the one for which the classifier was initially tested. It is worth noting that in case of activation of weak sources, the successful performance of the classifier depends upon the general level of signals originating from other sources in that specific time span.

Description: Published

Description: Nicolosi (Catania, Italy)

Description: 2V. Dinamiche di unrest e scenari pre-eruttivi

Description: open

Description: Mt. Etna is permanently active requiring a continuous data acquisition a multidisciplinary monitoring system where huge data masses accumulate and pose severe difficulties of interpretation. Therefore the INGV staff has developed a number of software tools for data mining, aiming at identifying structures in the data which can be related to the volcanic activity and furnish criteria for the definition of alert systems. We tackle the problem by applying methods of clustering and classification. We identify data groups by defining a measure of similarity or distance. Data groups may assume various shapes, once forming convex clouds once complex concave bodies. The tool “KKAanalysis” is a basket of clustering methods and forms the backbone of the tremor-based automatic alarm system of INGV-OE. It exploits both SOM and Fuzzy Clustering. Besides seismic data the concept has been applied to petrochemic data as well as in a combined analysis of gas-emission data and seismic data. The software “DBSCAN” focuses on density-based clustering that allows discovering clusters with arbitrary shape. Here, clusters are defined as dense regions of objects in the data space separated by regions of low density. In DBSCAN a cluster grows guaranteeing that the density within a group of objects exceeds some threshold. In the context of volcano monitoring the method is particularly promising in the recognition of ash particles as they have a rather irregular shape. The “MOTIF” software allows identifying typical wave forms in time series. It overcomes shortages of methods like cross- correlation, which entail a high computational effort. MOTIF on the other hand can recognize non-similarity of two patterns on a small number of data points without going through the whole length of the data vectors. The development includes modules for feature extraction and post-processing verifying the validity of the results obtained by the classifiers.

Description: Published

Description: Nicolosi (Catania, Italy)

Description: 2V. Dinamiche di unrest e scenari pre-eruttivi

Description: open

Description: Timely identification of changes in the state of volcanoes and onset of potentially dangerous eruptive phenomena requires efficacious surveillance methods. In the case of an active volcano like Mt Etna, the continuous background seismic signal called volcanic tremor is of paramount importance. The huge amount of continuously acquired digital data entails the necessity of data reduction and parameter extraction. For this purpose, techniques of automatic analysis of volcanic tremor were applied by INGV for the real time monitoring of this signal. We checked the possibility to identify regimes of volcanic activity based on pattern classification of volcanic tremor. A specific software named “KKAnalysis” was developed. It combines various unsupervised classification methods (Kohonen Maps and fuzzy cluster analysis) and forms the backbone of an automatic alert system at INGV-OE. Besides its near real time application, it can be operated off-line, allowing an efficient a-posteriori processing of data and tuning of the alarm criteria to match specific needs of sensitivity and robustness. An ongoing development of this tool will allow us to include a large number of seismic stations in a multistation-alarm system. The new system will be more robust in case of failure of single sensors, and will achieve a better coverage of the various eruptive craters. In an off-line test, we exploited a dataset covering eight years of seismic records, and analysed the performance of the new system in terms of “trigger timing” and spatial distribution of the stations. Intriguing results were obtained throughout periods of renewal of volcanic activity at Bocca Nuova-Voragine and North East Crater, and in the absence of paroxysmal phenomena at South East Crater and New South East Crater.

Description: Published

Description: Nicolosi (Catania, Italy)

Description: 2V. Dinamiche di unrest e scenari pre-eruttivi

Description: open

Description: In questo lavoro viene descritta l’installazione di una rete mobile nell’area dei Monti Nebrodi in seguito all’evento del 23-06-2011 di Ml = 4.6 e come tale intervento ha contribuito al miglioramento della localizzazione delle sorgenti sismiche soprattutto nella determinazione della profondità degli eventi. Verranno anche presentati i risultati delle localizzazioni ottenute attraverso l’integrazione dei dati acquisiti durante questa campagna, con quelli della rete sismica permanente dell’INGV-Osservatorio Etneo ( INGV -OE).

Description: Istituto Nazionale di Geofisica e Vulcanologia

Description: Published

Description: 1-24

Description: 4IT. Banche dati

Description: N/A or not JCR

Description: open

Description: Twenty-five lava fountains occurred on Mt. Etna from January 2011 to April 2012. In summer 2012 volcanic activity resumed in a milder form within the Bocca Nuova crater, before it came to an essential halt in August 2012. All these unrests offer rich material for testing automatic procedures of data processing and alert systems, running 24/7, in the context of volcano surveillance. We focus on the seismic background radiation – volcanic tremor – which plays a key role in the monitoring of Mt. Etna. Since 2006 a multistation alert system has been established in the INGV operative centre of Catania exploiting STA/LTA ratios. Besides, also the spectral characteristics of the signal, which change correspondingly to the type of volcanic activity, can be exploited for warning purposes. Here we apply Self Organizing Maps and Fuzzy Clustering which offer an efficient way to visualize signal characteristics and its development with time. All these techniques allow to identify early stages of eruptive events, and automatically flag a critical status before this becomes evident in conventional monitoring techniques. Changes of tremor characteristics are related to the position of the source of the signal. The location of the sources exploits the distribution of the amplitudes across the seismic network. The locations were extremely useful for warning, throughout both the flank eruption in 2008 as well as the 2011 lava fountains, during which a clear migration of tremor sources towards the eruptive centres could be noticed in advance. The location of the sources completes the picture of an imminent volcanic unrest, and corroborates early warnings flagged by the changes of signal characteristics. Real time data processing requires computational efficiency, robustness of the methods and stability of data acquisition. The amplitude based multi-station approach is not sensitive to the failure of single stations and therefore offers a good stability. The single station approach, exploiting unsupervised classification techniques, limits logistic efforts, as only one or few key stations are necessary. Both strategies have proven to be insensitive to disturbances (undesired transients like earthquakes, noise, short gaps in the continuous data flow). False alarms were not encountered so far. Stable data acquisition and processing come with a properly designed data storage solution. The reliability of data storage and its access is a critical issue. A cluster architecture has been realized for failover protection, including a Storage Area Network system, which allow easy data access following predefined user policies. We present concepts of the software architectures deployed at INGV Osservatorio Etneo in order to implement this tremor-based multi approach system. We envisage the integration of seismic data and those originating from other scientific fields (e. g., volcano imagery, geochemistry, deformation, gravity, magneto-telluric). This will facilitate cross-checking of evidences encountered from the single data streams, in particular allow their immediate verification with respect to ground truth.

Description: Published

Description: Nicolosi (Catania, Italy)

Description: 1.4. TTC - Sorveglianza sismologica delle aree vulcaniche attive

Description: 5.6. TTC - Attività di Sala Operativa

Description: open

Description: In questo lavoro si presentano i risultati di uno studio sulle caratteristiche del rumore sismico in prossimità del rilevatore di onde gravitazionali VIRGO (Cascina, Pisa), con particolare riferimento alle vibrazioni associate all’azione di un vicino parco eolico. La valutazione delle componenti spettrali del rumore verosimilmente indotte dagli aerogeneratori è stata effettuata mediante (i) Misure dirette alla base di una turbina, (ii) Correlazione fra le ampiezze spettrali del rumore e la velocità del vento; (iii) Determinazione delle proprietà direzionali da misure multicanale, (iv) Misura dell’attenuazione del segnale con la distanza dal parco eolico. Il disturbo provocato dagli aerogeneratori è particolarmente energetico alla frequenza di 1.7 Hz e, in particolari condizioni, è stato osservato fino a distanze di 11 km dal Parco Eolico. Il decadimento spaziale delle ampiezze ha un andamento complesso, che può essere interpretato in termini di una combinazione fra onde superficiali e onde di volume rifratte ad un’interfaccia profonda (~800 m) fra i sedimenti plio-pleistocenici ed i calcari Miocenici. La risposta locale nei dintorni dell’interferometro è stata investigata utilizzando la tecnica dei rapporti spettrali H/V. Si sono così evidenziate due bande di amplificazione imputabili ad effetti di risonanza legati alla geologia a scala locale: il primo intorno alla frequenza di 0.35 Hz, il secondo fra 0.7 e 2.0 Hz. Entrambi i picchi risultano essere essenzialmente omogenei in tutta l’area di studio, a conferma della sostanziale uniformità della struttura geologica.

Description: Published

Description: 1-30

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: In questo lavoro viene descritto il complesso sistema di acquisizione dati della RSM [vedi D’Alema et al., 2011 - in questo volume], costituita da 58 stazioni collegate in tempo reale e 13 stazioni dial-up. I dati delle stazioni in tempo reale sono acquisiti con il programma Seiscomp31; la detezione degli eventi sismici viene eseguita con il programma Earthworm ed infine l’analisi e l’interpretazione degli eventi viene effettuata attraverso il programma SacPicker di Daniele Spallarossa [vedi Spallarossa, 2011 - in questo volume]. La parte di rete dial-up è basata sul sistema Lennartz Mars882 ed è configurata in modo autonomo dalla rete in tempo reale. I dati delle due reti vengono successivamente uniti in un unico dataset ai fini di una interpretazione interattiva congiunta.

Description: Published

Description: 124-127

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: Da alcuni anni l’INGV e la Regione Marche collaborano nell’azione di monitoraggio sismico del territorio regionale. Nella sede di Ancona del CNT sono acquisiti in tempo reale i segnali sismici di circa 80 stazioni dell’Italia centro-orientale. Si è reso pertanto necessario sviluppare applicativi utili al controllo degli apparati che compongono il sistema di monitoraggio. In particolare, vengono controllati: 1) lo stato di funzionamento delle trasmissioni radio ed ethernet; 2) lo stato dell’alimentazione delle stazioni e il numero di satelliti ricevuti dagli apparati GPS; 3) la quantità di segnale sismico archiviato e i gaps del segnale continuo; 4) i livelli di rumore di fondo e la qualità del segnale sismico.

Description: Published

Description: 104-107

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: A Pilot Project for CO2 injection and storage was proposed for a gas storage area located at Cortemaggiore (Piacenza), in northern Italy. This project is conducted both to verify the injection techniques and to analyze the potentiality of CO2 as a cushion gas. Starting from 2004, a series of analysis has been conducted to verify suitability and feasibility of this operation. The injection phase will be preceded by a passive seismic monitoring in order to measure the background seismicity of the area. Seismic monitoring will be carried out during the 3 years of the injection phase and will continue also for a control period of 2 years, following the working phase. The Milano - Pavia Department of the Istituto Nazionale di Geofisica e Vulcanologia is in charge of the surface seismic monitoring. To study the background seismicity a microseismic network composed by 7 seismic stations has been realized. On February 2010, a first test phase has been conducted for 3 sites. The network was completed with 4 more stations on May 2010. All stations are composed by a 24-bit digital recorder (Lennartz M24/NET) with GPS time signal. The study area is characterized by a very high anthropic and industrial noise. In order to improve the quality of the seismic signals, 4 stations have been installed in a 100 m deep borehole. The seismic sensors (Lennartz LE-3D/BH for the borehole and LE-3Dlite MKI for the installation at the surface) have similar technical characteristics with 1 Hz free period, cutoff frequency at 80 Hz and dynamic range of 136 dB. In this first stage we analyzed the microseismic noise level and evaluated the detection capability of the network. Using the RMS measurements the borehole stations indicate a reduction on the noise by a factor of 2.5. A more detailed analysis, performed using the density function distribution of the power spectra, evidences a 10 dB gain for the borehole stations in the frequency band 1 - 10 Hz. Noise measurements have been used also to determine the minimum magnitude for the events detection. Using a point source model to simulate seismic events, we verified the expected detection levels by comparing the estimates obtained with the simulation and the local events recorded by the seismic network.

Description: Published

Description: 12

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: Nell’ambito del progetto FIRB-Airplane [“Piattaforma di ricerca multidisciplinare su terremoti e vulcani”, fondi MIUR 2007-2011 responsabili: Cocco, Amato e Stucchi1] dalla seconda metà del 2009 è stata installata una rete densa di stazioni sismiche nell’area dell’Alta Val Tiberina (AVT, Figura 1), i cui dati in continuo vengono trasmessi alla sede di Ancona del CNT attraverso una dorsale Wi-Fi HYPERLAN [Monachesi e Cattaneo, 2010]. La rete è stata progettata cercando di rispettare alcuni criteri, tra cui: controllo continuo della funzionalità delle singole stazioni, flessibilità nella scelta dei siti, riduzione del rischio di fulminazioni, possibilità di abbinare stazioni sismiche e stazioni geodetiche. A tal fine sono stati adottati strumenti a basso consumo per quel che riguarda acquisitori e sistemi di trasmissione, accompagnati dall’utilizzo di sistemi di alimentazione autonomi e sistemi di telecontrollo

Description: Published

Description: 91-93

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: Attualmente presso la sede di Ancona del CNT sono acquisiti i dati relativi a 58 stazioni in realtime ed a 13 stazioni dial-up. In particolare la sede di Ancona ha la funzione di server nei confronti della sala sismica nazionale per 28 stazioni in realtime e client per le rimanenti 30. Le stazioni dial-up hanno una connessione con radio modem (8) o con modem GSM (5). Gli acquisitori gestiti sono: GAIA1 e GAIA2, Trident/Cygnus, HDR24 e Lennartz Mars88/MC/RC. I sensori sono: Trillium 40-120-240s; Lennartz LE3D- 5s/1s/lite/BH, Mark L4-3D, Episensor ES-T. Il sistema di acquisizione dati è basato su Seiscomp31, mentre la detezione degli eventi avviene tramite Earthworm

Description: Published

Description: 19-21

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: In this paper we investigate nature and properties of narrow-band, transient seismic signals observed by a temporary array deployed in the Val Tiberina area (central Apennines, Italy). These signals are characterized by spindle-shaped, harmonic waveforms with no clear S-wave arrivals. The first portion of the seismograms exhibits a main frequency peak centred at 4.5 Hz, while the spectrum of the slowly decaying coda is peaked at about 2 Hz. Events discrimination is performed using a matched-filtering technique, resulting in a set of 2466 detections spanning the 2010 January–March time interval. From a plane-wave-fitting procedure, we estimate the kinematic properties of signals pertaining to a cluster of similar events. The repetition of measurements over a large number of precisely aligned seismograms allows for obtaining a robust statistics of horizontal slownesses and propagation azimuths associated with the early portion of the waveforms. The P-wave arrival exhibits horizontal slownesses around 0.1 s km−1, thus suggesting waves impinging at the array almost vertically. Separately, we use traveltimes measured at a sparse network to derive independent constraints on epicentral location. Ray parameters and azimuths are calibrated using slowness measurements from a local, well-located earthquake. After this correction, the joint solution from traveltime inversion and array analysis indicates a source region spanning the 1–3 km depth interval. Considerations related to the source depth and energy, and the occurrence rate which is not related to the daily and weekly working cycles, play against a surface, artificial source. Instead, the close resemblance of these signals to those commonly observed in volcanic environments suggest a source mechanism related to the resonance of a fluid–filled fracture, likely associated with instabilities in the flux of pressurized CO2.

Description: Published

Description: 918-928

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: JCR Journal

Description: reserved

Description: L’utilizzo di sensori in pozzo ha l’obiettivo di migliorare il rapporto segnale-disturbo per poter registrare segnali di eventi sismici in zone dove le registrazioni in superficie sono corrotte dai disturbi. Infatti, le registrazioni superficiali sono affette dal noise sismico ambientale il quale è particolarmente elevato in zone industrializzate a frequenze generalmente superiori ad 1 Hz [McNamara and Buland, 2004]. La RSN dell’INGV, gestita dal CNT [vedi Delladio, 2011 - in questo volume], è dotata attualmente di 6 sensori in pozzo, ubicati nelle seguenti località: Castelleone (CR), Imola (BO), Bellaria (RN), Senigallia (AN), Sansepolcro (AR), Città di Castello (PG). Le prime 4 località si trovano in pianura padana (Castelleone e Imola) e sulla costa adriatica (Bellaria e Senigallia): in questi siti l’utilizzo di un sensore in pozzo ha lo scopo di ottenere registrazioni in cui i disturbi antropici possano essere significativamente abbattuti, in quanto le aree citate sono tra le più industrializzate e urbanizzate del territorio nazionale [Marzorati and Bindi, 2006]. I pozzi di Sansepolcro e Città di Castello rientrano nell’area di interesse della Faglia Alto Tiberina, in cui terremoti di piccolissima magnitudo vengono registrati solo in siti particolarmente silenziosi dal punto di vista del noise sismico ambientale; perciò i due sensori in pozzo hanno lo scopo di avere un punto di osservazione più vicino alla sorgente dei segnali che si vogliono registrare. Nei prossimi paragrafi sono mostrati alcuni esempi utili per poter valutare l’efficienza dei sensori in pozzo.

Description: Published

Description: 72-75

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: In this paper the history of the Mobile Seismic Network of the Osservatorio Vesuviano (at present Department of Napoli of the Istituto Nazionale di Geofisica e Vulcanologia – INGV) is described. The instrumental development and the main research and monitoring activities since the early 1980’ are reported. Starting from the analog stations with magnetic tape recording to the first digital stations with trigger recording, until the modern multichannel 24bit devices, the technological development of the last 30 years has given a strong contribution to increase the knowledge in the seismology and seismotectonics fields. The Mobile Seismic Network has been engaged in active and passive seismic studies both on volcanic and tectonic areas. Particularly, the contribution of the Mobile Seismic Network for the monitoring of Neapolitan active volcanoes has been very important to improve the Permanent Network. During seismic crises high quality data have been gathered allowing detailed analyses of the seismic activity. Moreover, the time synchronization by means of GPS time code allowed the deployment of the Mobile Network abroad and the collaboration with the main international research institutes. At present, the Mobile Seismic Network of the Osservatorio Vesuviano is developing on multichannel acquisition systems, also in array configuration, to gathered simultaneously seismic signals with a large frequency band.

Description: Published

Description: 1-51

Description: 1.4. TTC - Sorveglianza sismologica delle aree vulcaniche attive

Description: 3.2. Tettonica attiva

Description: N/A or not JCR

Description: open

Description: Il Centro di Ricerche Sismologiche (CRS) dell’Istituto Nazionale di Oceanografia e di Geofisica Sperimentale - OGS è stato istituito con la legge n. 399 del 30 novembre 1989 col fine istituzionale di: “...svolgere, in autonomia scientifica e secondo specifici progetti: ricerche sulla sismicità e sulla sismogenesi dell’Italia nordorientale, gestendo e sviluppando inoltre la connessa rete di rilevamento sismico anche per fini di protezione civile. Nei campi di sua competenza il dipartimento svolge inoltre: attività applicativa; studi e ricerche sulle tecnologie di acquisizione, trasmissione e trattamento del segnale sismico; studi e ricerche per l’affinamento del modello sismotettonico dell’Italia nord-orientale.” Dal 2003, in seguito alla conferenza “Integrating the Seismic Monitoring in Central Europe” tenutasi a Udine e al Workshop “Beyond Frontiers: Seismic Networks in the Southern Alps” organizzato a Trieste, l’OGS ha partecipato al progetto europeo Interreg IIIa Italia/Austria “Reti sismologiche senza frontiere nelle Alpi sudorientali” 1. Il progetto nasce dalla stretta collaborazione esistente tra: • il CRS dell’OGS a Udine; • la Protezione Civile della Regione Friuli-Venezia Giulia (FVG); • l’allora Dipartimento di Scienze della Terra (DST) dell’Università di Trieste (adesso Dipartimento di Geoscienze); • lo Zentralanstalt für Meteorologie und Geodynamik, Hauptabteilung Geophysik di Vienna in Austria (ZAMG); • l’Urad za seizmologijo, geologijo, Agencija Republike Slovenije za okolje, di Lubiana in Slovenia (ARSO). Il terremoto di Bovec, avvenuto in prossimità dei confini tra FVG, Carinzia e Slovenia nel 1998, ha evidenziato l’importanza di un’integrazione e potenziamento delle reti delle diverse nazioni. In particolare, in tale occasione si è evidenziato: l’eterogeneità della strumentazione esistente nelle diverse reti, la mancanza di connessione dedicata tra i centri sismologici anche all’interno della stessa nazione e la mancanza di un sistema di elaborazione ed archiviazione dei dati omogeneo. Lo scopo del progetto è stato quindi l’integrazione transfrontaliera delle reti sismologiche presenti nelle tre nazioni per far fronte alle necessità di protezione civile e per scopi di ricerca scientifica. La disponibilità in tempo reale di forme d’onda dei terremoti permette, infatti, l’analisi immediata dei dati in maniera automatica che fornisce informazioni rapide ed affidabili alle autorità di protezione civile. Gli obiettivi principali raggiunti durante il progetto sono: 1. la creazione di un centro di raccolta dati in tempo reale presso la Sala Operativa Regionale (SOR) di Palmanova della Protezione Civile del Friuli-Venezia Giulia e l’adattamento dei centri raccolta dati del DST, dell’OGS e di Vienna a questi scopi. La duplicazione dei centri di raccolta dati e delle connessioni tra questi garantisce il funzionamento del sistema anche nel caso che uno o più centri siano fuori uso per i danni subiti da un sisma distruttivo; 2. l’individuazione e la realizzazione di uno o più sistemi di connessione dati efficienti e sicuri tra le stazioni ed i centri di raccolta; 3. la ridefinizione della geometria attuale delle reti, in funzione della migliore copertura possibile delle aree potenzialmente pericolose a ridosso dei confini di stato; 4. la programmazione dei protocolli comuni d’intervento in caso di forti terremoti.

Description: Published

Description: 38-41

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: N/A or not JCR

Description: open

Description: After an earthquake, rapid, real-time assessment of hazards such as ground shaking and tsunami potential is important for early warning and emergency response. Tsunami potential depends on sea floor displacement, which is related to the length, L, width, W, mean slip, D, and depth, z, of earthquake rupture. Currently, the primary discriminant for tsunami potential is the centroid-moment tensor magnitude, MwCMT, representing the seismic potency LWD, and estimated through an indirect, inversion procedure. The obtained MwCMT and the implied LWD value vary with the depth of faulting, assumed earth model and other factors, and is only available 30 min or more after an earthquake. The use of more direct procedures for hazard assessment, when available, could avoid these problems and aid in effective early warning. Here we present a direct procedure for rapid assessment of earthquake tsunami potential using two, simple measures on P-wave seismograms – the dominant period on the velocity records, Td, and the likelihood that the high-frequency, apparent rupture-duration, T0, exceeds 50-55 sec. T0 can be related to the critical parameters L and z, while Td may be related to W, D or z. For a set of recent, large earthquakes, we show that the period-duration product TdT0 gives more information on tsunami impact and size than MwCMT and other currently used discriminants. All discriminants have difficulty in assessing the tsunami potential for oceanic strike-slip and back-arc or upper-plate, intraplate earthquake types. Our analysis and results suggest that tsunami potential is not directly related to the potency LWD from the “seismic” faulting model, as is assumed with the use of the MwCMT discriminant. Instead, knowledge of rupture length, L, and depth, z, alone can constrain well the tsunami potential of an earthquake, with explicit determination of fault width, W, and slip, D, being of secondary importance. With available real-time seismogram data, rapid calculation of the direct, period- duration discriminant can be completed within 6-10 min after an earthquake occurs and thus can aid in effective and reliable tsunami early warning.

Description: In press

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: JCR Journal

Description: open

Description: The aim of this study is the sharing of waveforms recorded by several Istituto Nazionale di Geofisica e Vulcanologia (INGV) temporary stations (managed by the Milan-Pavia section; INGV MI-PV). These stations were installed after the April 6, 2009, Mw 6.3, L'Aquila earthquake (central Italy). The work synthesizes the activities conducted in the field by the INGV MI-PV working group over the three months following the mainshock. The field activities were developed in four different phases that were defined according to their time periods. Starting from April 7, 2009, for the first phase, the temporary stations were installed in correspondence with the more damaged areas. The scope was to record the strongest aftershocks in the days that followed the mainshock. In this phase, the stations were composed of a sixcomponent acquisition system that was coupled with both a weak-motion and a strong-motion sensor. After the first month, the last three phases of installation investigated the seismic responses of sites located in the epicentral area, involving villages within a radius of about 20 km from the epicenter of the April 6 mainshock. In this way, over four specific time-period phases, the stations were installed in sites with different lithological and geomorphological conditions. The instruments worked from April 7 to July 14, 2009; in this period, 9,155 aftershocks (134,262 accelerometric waveforms and 133,242 velocimetric waveforms), with ML ≤5.3 were recorded. This study describes the dataset of these earthquake waveforms recorded with both velocity and acceleration transducers. Selected waveforms are available through ftp://ftp.mi.ingv.it/download/RAIS-TS_rel01/, with their corresponding information concerning instrumental characteristics, installation sites, and earthquakes recorded.

Description: Published

Description: 101-113

Description: 1.1. TTC - Monitoraggio sismico del territorio nazionale

Description: JCR Journal

Description: open

Description: A seismic noise recording experiment has been carried out in the Campi Flegrei volcanic area from March 9 to 26, 2009 in the framework of the INGV-DPC 2007-2009 agreement (Project V1 – UNREST). The project aimed at the realization of an integrated method for the definition of the unrest phases at Campi Flegrei. 21 digital three-component seismic stations equipped with broad band seismometers have been added to the existing 11 digital stations already deployed in the area. The preliminary results show a correlation between the seismic noise level and the anthropic activity, whereas the meteorological conditions seem affecting the low frequency seismic noise. These results are important to define the detection thresholds of the seismic signals generated during a possible renewal phase of the volcanic activity.

Description: Published

Description: 1-21

Description: N/A or not JCR

Description: open

Description: Questa nota presenta una sintesi delle attività svolte durante il rilievomacrosismico del terremoto avvenuto tra le province di Parma e Reggio Emilia il 23 dicembre 2008. La scossa di Ml 5.2 è stata localizzata a sud di Parma ed è stata avvertita in tutta l’Italia settentrionale e in gran parte della Liguria e della Toscana. Il presente rapporto illustra lemodalità di intervento del teamQUEST, relative al rilievo degli effetti e alla valutazione in intensità MCS in particolare per le località della zona epicentrale. L’ampia documentazione fotografica illustra alcuni dettagli delle tipologie di danneggiamento rilevate e consente di comprendere meglio le valutazioni dell’intensità macrosismica. This paper presents an overview of the activities performed during the macroseismic field survey of the earthquake that occurred in the Parma and Reggio Emilia region on December 23, 2008. The mainshock (Ml=5.2), was located south of the city of Parma and was resolutely felt through Northern Italy. The report here presented shows the procedures carried out by QUEST (Quick Earthquake Survey Team), concerning the survey. QUEST has been engaged in gathering the damage information and in assessing the macroseismic intensity, in particular about the epicentral area. A copious photo collection shows details of the observed damage nature and allows to better illustrate the intensity

Description: Published

Description: 1-41

Description: 5.1. TTC - Banche dati e metodi macrosismici

Description: N/A or not JCR

Description: open

Description: Seismic monitoring in Italy has strongly improved since the 1997 Umbria-Marche earthquake sequence. This has made the National Seismic Network (RSN) a powerful tool both to rapidly locate and quantify thousands of earthquakes occurring in Italy every year, and to study the seismic activity in detail, accumulating an impressive high quality data set that will be exploited in the coming years to understand earthquake processes and to investigate the deep structure. This paper summarizes and compares the basic features of the seismicity recorded in 2000 and 2006, before and after the implementation of the new RSN, showing that the number of well located earthquakes has more than doubled and that the completeness magnitude has dropped from ~2.3 to ~1.7. In addition, we concentrate on the evaluation of the current automatic location and magnitudes versus the revised ones, published routinely in the INGV bulletins. We show that the rapid estimates of locations and magnitudes are robust and reliable for most regions in Italy: more than 75% of the earthquakes are located in real time within 10km from the «true» locations, whereas the rapid magnitudes ML are within ±0.4 from the revised values in 90% of cases. The comparison between real-time and revised locations shows that there are a few regions in Italy where a further network improvement is still desirable. These include all the off-shore regions, Calabria, western Sicily, the Alpine and Po Plain region, and some small areas along the peninsula.

Description: Published

Description: 417-431

Description: 5.2. TTC - Banche dati di sismologia strumentale

Description: JCR Journal

Description: open

Description: Questo lavoro presenta una utility per il GIS MapInfo™ sviluppata per l'archiviazione ed elaborazione dei dati macrosismici dalla fase di georeferenziazione fino al plottaggio finale su mappa. L'identificazione della località associata con un'osservazione macrosismica è un'operazione che talvolta può causare errori ed in seguito problemi nell'analisi ed interpretazione dei dati. La routine MacroMap fornisce uno strumento che in modo semplice e veloce aiuti nell'identificazione della corretta località a cui attribuire l'informazione macrosismica durante lo studio di un terremoto. L'utility è strutturata per utilizzare il formato della directory geografica DIR04 e le procedure adottate nella compilazione del DataBase Macrosismico Italiano DBMI04. MacroMap è stata sperimentata "sul campo" durante alcune indagini macrosismiche e tiene conto dell'esperienza e dei suggerimenti degli operatori del Gruppo QUEST (QUick Earthquake Survey Team). I campi di utilizzo di MacroMap vanno dalla realizzazione speditiva di mappe e tabelle per la produzione di report macrosismici per la Protezione Civile, alla revisione di terremoti storici, grazie all'avanzato sistema di query disponibile per la selezione dei toponimi del database geografico.

Description: Published

Description: 1-21

Description: 5.1. TTC - Banche dati e metodi macrosismici

Description: N/A or not JCR

Description: open

Description: The modern digital seismic stations are provided with 24 bit A/D converters, high capacity recording systems and broad-band seismometers. Nevertheless, few tens year old seismic stations can be still able to give an useful contribution to seismic monitoring. Some out-of-date seismic stations, such as the Lennartz PCM 5800, are characterized by the data acquisition in trigger mode on magnetic tape, allowing a continuous recording time of about 90 minutes. We have checked the possibility to substitute the Uher tape recorder of the Lennartz PCM 5800 stations with modern digital recorder, in order to give a new life to these stations. Several type of digital recorders have been tried. According to the results of our trials, the Hi-MiniDisc (Hi-MD) recorder is resulted the most useful one. This apparatus records on 1GB magneto-optical disks with a continuous recording time up to about 8 hours. This time allows to record about 500 trigger windows of about 50-60 seconds on one disk, about 5 time the old magnetic tape. According with these results, the Lennartz PCM 5800 digital seismic stations can be useful during seismic experiments or as a support of the Permanent Seismic Networks at local and regional scale.

Description: Published

Description: 1-17

Description: 1.4. TTC - Sorveglianza sismologica delle aree vulcaniche attive

Description: N/A or not JCR

Description: open

Description: Seismic networks are worldwide diffuse to monitor both volcanic and tectonic seismogenetic areas. Some differences, such the basement on which the seismometer is located and the environmental conditions, characterize the installation of seismic stations in volcanic and tectonic areas. Nevertheless, some basic principles are common. To obtain good quality seismic data is very important to realize a high grade installation of all the instruments equipping a seismic station. Several procedure must be taken into account to optimize the instrument setting up. Electronic noise may be minimize using proper connecting line and adequate grounding. Effective lightning protections are essential to save instruments from both surges and strikes. Good seismometer ground coupling improves the signal quality and the signal-to-noise ratio. These procedures have been carried out at the Osservatorio Vesuviano to improve the existing seismic network as well as the installation of the new stations. As a result of this action an improvement of both the signal-to-noise ratio and the network reliability has been obtained.

Description: Published

Description: 1-20

Description: 1.4. TTC - Sorveglianza sismologica delle aree vulcaniche attive

Description: open

Description: The broad-band teleseismics records of the earthquake of October 29,1989 in Algeria (MW = 6.0) allow a detailed study of the rupture process of this earthquake. The focal mechanism obtained by P and SH modeling corresponds to reverse faulting with a small amount of left-lateral movement along a fault striking 246° and dipping 56°. The rupture is found to be complex with two sub-events separated in time but occurring on the same plane. The lowfrequency records of an accelerometer located some 25 km to the west of the main shock are also better fi tted when the rupture is composed of a double pulse. In the two cases, there is strong evidence for the rupture to propagate from south-west towards north-east.The relocalisation of the main shock by using a master-event technique and the data from Italian and Spanish stations led to the same conclusions. Soon after the main event, a temporary seimic network was installed in the epicentral area. The aftershock clouds defi ne a SW-NE fault dipping to the NW compatible with the results of the modelisations of the teleseismic body-waves and the accelerogram. The focal mechanisms correspond mainly to reverse faulting. The maximum principal direction of the stress tensor obtained from the inversion is about N-S and the minimum is vertical, typical of a compressive regime. The Chenoua earthquake took place on a fault which was not recognized as active. Repeated comparable seismic events on this fault and on the fault that borders the massif to the south explain this intriguing topographic feature.

Description: Published

Description: JCR Journal

Description: open

Description: The El Camp Fault (Catalan Coastal Ranges, NE Iberian Peninsula) is a slow slipping normal fault whose seismic potential has only recently been recognised. New geomorphic and trench investigations were carried out during a training course across the El Camp Fault at the La Porquerola alluvial fan site. A new trench (trench 8) was dug close to a trench made previously at this site (trench 4). With the aid of two long topographic profiles across the fault scarp we obtained a vertical slip rate ranging between 0.05 and 0.08 mm/yr. At the trench site, two main faults, which can be correlated between trenches 8 and 4, make up the fault zone. Using trench analysis three paleoseismic events were identified, two between 34.000 and 125.000 years BP (events 3 and 2) and another event younger than 13 500 years BP (event 1), which can be correlated, respectively, with events X (50.000- 125.000 years BP), Y (35.000-50.000 years BP) and Z (3000-25.000 years BP). The last seismic event at the La Porquerola alluvial fan site is described for the first time, but with some uncertainties.

Description: Published

Description: JCR Journal

Description: open

Description: Recent seismological studies contribute to better understand the first order characteristics of earthquake occurrence in Italy, identifying the potential sites for moderate to large size earthquakes. Ad hoc passive seismic experiments performed in these areas provide information to focus on the location and geometry of the active faults more closely. This information is relevant for assessing seismic hazard and for accurately constraining possible ground shaking scenarios. The area around the Città di Castello Basin, in the Northern Apennines (Central Italy), is characterized by the absence of instrumental seismicity (M 〉 2.5), it is adjacent to faults ruptured by recent and historical earthquakes. To better understand the tectonics of the area, we installed a dense network of seismic stations equipped with broadband and short period seismometers collecting data continuously for 8 months (October 2000-May 2001). The processing of ~ 900 Gbyte of data revealed a consistent background seismicity consisting of very low magnitude earthquakes (ML 〈 3.2). Preliminary locations of about 2200 local earthquakes show that the area can be divided into two regions with different seismic behaviour: an area to the NW, in between Sansepolcro and Città di Castello, where seismicity is not present. An area toward the SE, in between Città di Castello, Umbertide and Gubbio, where we detected a high microseismicity activity. These findings suggest a probable different mechanical behaviour of the two regions. In the latter area, the seismicity is confined between 0 and 8 km of depth revealing a rather well defined east-dipping, low angle fault 35 km wide that cuts through the entire upper crust down to 12-15 km depth. Beside an apparent structural complexity, fault plane solutions of background seismicity reveal a homogeneous pattern of deformation with a clear NE-SW extension.

Description: Published

Description: JCR Journal

Description: open

Description: A site response experiment was performed in the basin of Città di Castello (a small town in Central Italy) in May 2001. This study is part of a project on the evaluation of seismic hazard in seismogenic areas funded by the Gruppo Nazionale Difesa dai Terremoti (GNDT). The experiment consisted of a dense fixed transect configuration with most of the stations recording in continuous mode, and several ambient noise measurements both in single station and in array configuration spread over the investigated area. The dense transect was composed of 26 seismic stations in a crosswise configuration with a maximum inter-station distance of 250 m. The stations were deployed in the southern part of the basin, from the eastern bedrock outcrop to the western edge, across the town. About 70 earthquakes were recorded during 10 days of deployment, generally low magnitude or regional events. We located 23 earthquakes and 17 of them were located using the waveform similarity approach at 4 stations outside the target area. These 4 stations were part of a dense temporary seismic network involved in a previous experiment of the same project, aimed at performing a high-resolution picture of the local seismicity. Delay analysis on the recorded waveforms allowed us to infer the basin geometry at depth and estimate the S-wave velocity of sediments. Moreover, we evaluated relative site response along the E-W transect by performing a standard spectral ratio. Amplification factors up to 9 are found inside the basin; at frequencies above 5 Hz stations closer to the edges show higher amplification, whereas stations located in the middle of the basin, where the alluvial sediments are thicker (CD11-CD14), show higher amplification below 5 Hz. We considered the average amplification in two frequency bands (1-5 Hz and 5-10 Hz), representative of the resonance frequency for 2-3 storey buildings and 1 storey houses,respectively. Our results suggest that the potential hazard for 2-3 storey buildings is higher in the center of the basin (amplification factor up to 6), and for 1 storey houses is higher at the edges (amplification factor up to 5).

Description: Published

Description: JCR Journal

Description: open

Description: To verify the results of seismic microzoning and to improve techniques, the damage data of past destructive earthquakes is an important key reference. The damage data of the 1923 Kanto, Japan, earthquake in the epicentral region are collected and compiled to produce the most reliable and detailed damage map. The damage map is compared with the results from the existing damage assessment and is used to discuss revision of the site amplification evaluation.

Description: Published

Description: JCR Journal

Description: open

Description: This study presents results of ambient noise measurements from temporary single station and small-scale array deployments in the northeast of Basle. H/V spectral ratios were determined along various profiles crossing the eastern masterfault of the Rhine Rift Valley and the adjacent sedimentary rift fills. The fundamental H/V peak frequencies are decreasing along the profile towards the eastern direction being consistent with the dip of the tertiary sediments within the rift. Using existing empirical relationships between H/V frequency peaks and the depth of the dominant seismic contrast, derived on basis of the ?/4-resonance hypothesis and a power law depth dependence of the S-wave velocity, we obtain thicknesses of the rift fill from about 155 m in the west to 280 m in the east. This is in agreement with previous studies. The array analysis of the ambient noise wavefield yielded a stable dispersion relation consistent with Rayleigh wave propagation velocities. We conclude that a significant amount of surface waves is contained in the observed wavefield. The computed ellipticity for fundamental mode Rayleigh waves for the velocity depth models used for the estimation of the sediment thicknesses is in agreement with the observed H/V spectra over a large frequency band.

Description: Published

Description: JCR Journal

Description: open

Description: The seismic period which occurred in a portion of Guidonia Montecelio and Tivoli territory, two towns situated about twenty kilometres NE of Rome, affected four areas with a high density of population: Guidonia, Collefiorito, Villalba and Bagni di Tivoli. Even though the events had a very low magnitude (less than 3.0), local phenomena, like rumbles and strong vibrations of the ground, frightened inhabitants also because some months before (January 26, 2001) in a village named Marcellina situated a few kilometres away from Guidonia, a large sinkhole (600 m) had appeared without fore signals. The «Istituto Nazionale di Geofisica e Vulcanologia» (INGV) installed some digital stations that monitored the seismic phenomena. This paper has the aim to process all the information acquired during the period, both from the micro and macro seismic point of view, in order to explain the phenomenology that involved the area. The synergy of the two methodologies lead us to the conclusion that two different seismotectonic structures originated the events, one in an anti-apenninic direction, the other in a N-S direction.

Description: Published

Description: JCR Journal

Description: open

Description: In order to evaluate the detection and localisation improvement of a small aperture array in the Northern Apennines, we installed an irregularly spaced test configuration in the vicinity of Città di Castello (CDC) for a period of two weeks. The experimental array consisted of nine 3-component stations with inter-station distances between 150 m and 2200 m. Seismic data were digitised at 125 Hz and telemetered to a mobile acquisition, processing and storage centre. The data could only be recorded in trigger mode. The peculiarity of the test array installation was the exclusive use of 3-component sensors at all array sites, which also allowed beamforming for S-phases on the horizontal components. Since the altitudes of the single array sites differed considerably among each other, for f-k analysis and beamforming an elevation correction was included. During the two weeks of operation about 20 local earthquakes with magnitudes ML〈2.6, 1 regional, and several teleseismic events were recorded. In addition to these events, the array occasionally triggered on coherent noise-signals generated by local industrial activity. The data analysis was performed by means of f-k analysis and beamforming, providing wavenumber characteristics of the incident plane wave. Typical apparent velocities were determined to be 4.8 km/s and 6 km/s for Pg-phases and ~10 km/s for Pn-phases. We observed local seismic events, which occurred just beneath the array. In these cases wavefronts with unusual high apparent velocities, similar to those found for the Pn-phase, were observed. Since no continuously recorded array data were available, we extrapolated the lower detection magnitude threshold as a result of the SNR improvement due to array beamforming. Compared to the actual detection threshold of MT ~1.6 reached by the national seismic network in this area, a nine element array would improve this value up to MT ~ 0.8.

Description: Published

Description: JCR Journal

Description: open

Description: Several satellite techniques have been proposed to monitor events related to seismic and volcanic activity. A selfadaptive approach (RAT, Robust AVHRR Techniques) has recently been proposed which seems able to recognise space-time anomalies, differently related to such events, also in the presence of highly variable contributions from atmospheric (transmittance), surface (emissivity and morphology) and observational (time/season, but also solar and satellite zenithal angles) conditions. On the basis of NOAA-AVHRR data, the RAT aprroach has already been applied to Mount Etna volcanic ash cloud monitoring in daytime, and to seismic area monitoring in Southern Italy. This paper presents the theoretical basis for the extension of RAT approach also to nighttime volcanic ash cloud detection, together with its possible implementation to lava flow monitoring. One example of successful forecasting (few days before) of a new lava vent opening during the Mount Etna eruption of July 2001 will be discussed in some detail. Progress on the use of the same approach on seismically active area monitoring will be discussed by comparison with previous results achieved on the Irpinia-Basilicata earthquake (MS = 6.9), which occurred on November 23rd 1980 in Southern Italy.

Description: Published

Description: JCR Journal

Description: open