ALBERT

Description: We estimate the contamination risks from the atmospheric dispersion of radionuclides released by severe nuclear power plant accidents using the ECHAM/Modular Earth Submodel System (MESSy) atmospheric chemistry (EMAC) atmospheric chemistry-general circulation model at high resolution (50 km). We present an overview of global risks and also a case study of nuclear power plants that are currently under construction, planned and proposed in the Eastern Mediterranean and Middle East, a region prone to earthquakes. We implemented continuous emissions from each location, making the simplifying assumption that all potential accidents release the same amount of radioactivity. We simulated atmospheric transport and decay, focusing on 137Cs and 131I as proxies for particulate and gaseous radionuclides, respectively. We present risk maps for potential surface layer concentrations, deposition and doses to humans from the inhalation exposure of 131I. The estimated risks exhibit seasonal variability, with the highest surface level concentrations of gaseous radionuclides in the Northern Hemisphere during winter.

Description: The long-lived pioneer species Pericopsis elata is one of the rare tropical timbers on the list of the Convention on International Trade of Endangered Species, supporting the need for accurate and reliable growth data. In one planted and one natural forest in the Democratic Republic of Congo, respectively four and 37 Pericopsis stem disks were collected. The tree-ring series of planted trees were used to confirm annual tree-ring formation. For the natural forest, a tree-ring chronology with 24 stem disks ranged from 1852 up to 2008. This chronology was compared with time-series of local precipitation, resulting in a significant correlation with the second half of the rainy season (September–November). This seasonal precipitation was related with sea surface temperatures of the West Indian Ocean. Higher precipitation during El Niño years corresponded with higher tree-ring indices but differences were not significant. In addition, pointer years were rare and did not have a consistent link with extreme climatic conditions. The existence of annual tree rings encourages further tree-ring analyses of P. elata and other flagship timber species in order to further document climate-growth responses and to provide the long-term framework that is needed for sustainable management planning.

Description: Publication date: 2014 Source: Procedia Environmental Sciences, Volume 22 Author(s): Herman van Os , Rien Herber , Bert Scholtens The decision-making process for subsurface activities in the Netherlands has been unable to cope with the driving forces related to social acceptance in several recently proposed subsurface activities. We therefore investigated the possibility to include the triangle of social acceptance in the decision-making process. Our conceptual model relates the stakeholders, their goals and the driving forces to each other. We developed a framework, which describes the interaction between eleven design criteria for a Decision Support System (DSS). This framework will enable us to design a better, from a social acceptance perspective, DSS for subsurface activities in the Netherlands. Since the goals addressed in the decision-making process are very broad and the stakeholders are quite diverse, a single uniform DSS is not able to provide a satisfactory solution. We therefore suggest to design a DSS that is matched with each class of social acceptance.

Description: Publication date: 2014 Source: Procedia Environmental Sciences, Volume 22 Author(s): Yoshie Inada , Shinobu Izumi , Motoya Koga , Shigehito Matsubara We are developing a planning support system for welfare urban design. If we quantify the optimal route (the route that is the easiest to pass through) for challenged people, we will be able to select the areas that require adjustment in terms of accessibility with greater efficiency. In this paper we report on our development of the prototype system to present an optimal route for wheelchair users, and also, the two workshops we had for evaluating the accuracy of the resulted optimal route.

Description: Publication date: 2014 Source: Procedia Environmental Sciences, Volume 22 Author(s): Erfaneh Allameh , Mohammadali Heidari , Bauke De Vries , Harry Timmermans , Mohammad Masoud , Farhang Mozaffar Almost everyone would agree that teleworking is increasingly growing; but beyond this broad statement, we know little about how people behave when they work at home and how they balance their work and life. User comfort and productivity cannot be addressed properly, without a deep understanding of usersʼ working behavior. This gap is even deeper when it comes to the domain of smart homes as new types of housing which aim to enhance working at home. Hence, more user-centered studies are needed to comprehend the interrelationships among housing, technology, daily life and the work activities. In this paper, we use the outputs of an experiment to model usersʼ work activities in a smart home. The experiment was conducted among 254 respondents, who were asked to explore a smart home in a virtual environment and then to arrange their daily activities including work related activities in the virtual smart home. A choice modeling approach, based on the Multinomial Logit Model (MNL), is applied to model how an individual works at a smart home given influential factors such as the individualsʼ socio-demographic profile and their current lifestyle. Two features of working in a smart home are covered in this paper, namely, “the integration of work activities with other daily activities” and “the location of work activities in the house”. The results give better insight into the future trends of working at home and the effects of smart homes on working behavior of people. The results can be used in further developments of both smart homes and teleworking.

Description: Publication date: 2014 Source: Procedia Environmental Sciences, Volume 22 Author(s): Jinhee Kim , Soora Rasouli , Harry Timmermans Hybrid choice models have been developed as an extension of discrete choice models, particularly multinomial logit models, in an attempt to include attitudinal variables. The quintessence of hybrid choice models is that a model of attitude formation is estimated and the estimated attitudes are added to the commonly used set of attributes in discrete choice models: attributes of the choice alternatives and socio-demographic variables. The most commonly applied model is based on linear specifications, both for the attitude model and the utility function. In this review paper, we discuss the principles underlying the hybrid choice model, summarize the specifications used in previous applications of the model and then continue discussing recent progress that added social influence to the model specification and replaced the linear specification of the utility function with a nonlinear function.

Description: Publication date: 2014 Source: Procedia Environmental Sciences, Volume 22 Author(s): Yountaik Leem , Sang Ho Lee , Jungho Yoon To overcome many difficulties in sustaining the satisfying quality of life for a large population 1 , urban spaces are evolving toward more efficient spaces by combination with ICTs (information and communication technologies) and raising the possibility to provide improved urban services which can enrich the quality of life of the citizen. In many cities over the world, a good number of public and private services in transportation, environment, urban safety from crime or disaster, health and other fields are designed and implemented with IT infrastructure. In spite of the expectation of cost-effective urban services based on the linkage between data and systems, obstructions in administrative and technical domains have made it difficult to be implemented. In this study, two advanced ICTs based urban services, which were developed by linkage and convergence of urban information and systems of Korea were introduced and analysed. The structural design of system convergence and data sharing scheme of Carbon Emission Monitoring System (CEMS) in Sejong City uses UIS (Urban Information System for local authorities), GIS data and other data provided by the public agencies, such as Korea Meteorological Administration for the monitoring and analysing the characteristics of the energy consumption of household 2 . Another system, Urban Integrated CCTV Control System (ICCS) in Anyang City, shows integrated CCTV networks for crime prevention, traffic control and public facility management to provide extended urban services, such as disaster prevention, police investigation and others. Qualitative and Quantitative effects analyses with technical and policy directions were suggested for the development and improvement of future urban services for a liveable city.

Description: Our aim is to explore general practitioners’ (GPs’) knowledge about EMF, and to assess whether different knowledge structures are related to the GPs’ concern about EMF. Random samples were drawn from lists of GPs in Germany in 2008. Knowledge about EMF was assessed by seven items. A latent class analysis was conducted to identify latent structures in GPs’ knowledge. Further, the GPs’ concern about EMF health risk was measured using a score comprising six items. The association between GPs’ concern about EMF and their knowledge was analysed using multiple linear regression. In total 435 (response rate 23.3%) GPs participated in the study. Four groups were identified by the latent class analysis: 43.1% of the GPs gave mainly correct answers; 23.7% of the GPs answered low frequency EMF questions correctly; 19.2% answered only the questions relating EMF with health risks, and 14.0% answered mostly “don’t know”. There was no association between GPs’ latent knowledge classes or between the number of correct answers given by the GPs and their EMF concern, whereas the number of incorrect answers was associated with EMF concern. Greater EMF concern in subjects with more incorrect answers suggests paying particular attention to misconceptions regarding EMF in risk communication.

Description: This study aims to explore the efficiency of using online education as an intervention measure to prevent occupational hazards in a clinical nursing setting. The subjects were 320 female nursing staff from two hospitals in Taiwan. The questionnaire results indicated that the subjects primarily experienced human factor occupational hazards, as well as psychological and social hazards. Specifically, 73.1% and 69.8% of the subjects suffered from poor sleep quality and low back pain, respectively. After web-based learning, the experimental group had higher post-test scores than the control group in terms of knowledge, attitudes, and practices (KAP). However, there was only a significant difference (p 〈 0.05) in their knowledge about the prevention of occupational hazards. It is suggested that an online discussion may enhance nursing staff’s participation in web-based learning, and further facilitate their comments on negative factors. The findings can highly promote nursing staff’s attitudes and practices toward preventing occupational hazards through web-based learning.

Description: Ambient particulate matters and temperature were reported to have additive effects over the respiratory disease hospital admissions and deaths. The purpose of this study is to discuss the interactive pulmonary toxicities of cold stress and fine particulate matter (PM2.5) exposure by estimating inflammation and oxidative stress responses. 48 Wistar male rats, matched by weight and age, were randomly assigned to six groups, which were treated with cold stress alone (0 °C, 10 °C, and 20 °C (Normal control)) and cold stresses plus PM2.5 exposures respectively. Cold stress alone groups were intratracheal instillation of 0.25 mL normal saline, while cold stress plus PM2.5 exposure groups were intratracheal instillation of 8 mg/0.25 mL PM2.5. These procedures were carried out for three times with an interval of 48 hours for each treatment. All rats were sacrificed after 48 hours of the third treatment. The bronchoalveolar lavage fluid (BALF) was collected for analyzing inflammatory cells and cytokines, and lung homogenate MDA was determined for oxidative stress estimation. Results showed higher level of total cell and neutrophil in the BALF of PM2.5 exposed groups (p 〈 0.05). Negative relationships between cold stress intensity and the level of tumor necrosis factor alpha (TNF-a), C-reactive protein (CRP) interleukin-6 (IL-6) and interleukin-8 (IL-8) in BALF were indicated in PM2.5 exposure groups. Exposure to cold stress alone caused significant increase of inflammatory cytokines and methane dicarboxylic aldehyde (MDA) and decline of superoxide dismutase (SOD) and glutathione peroxidase (GSH-Px) activity only in 0 °C exposure group (p 〈 0.05). The two-way ANOVA found significant interactive effects between PM2.5 exposure and cold stress in the level of neutrophil, IL-6 and IL-8 and SOD activity (p 〈 0.05). These data demonstrated that inflammation and oxidative stress involved in the additive effect of PM2.5 exposure and cold stress on pulmonary toxicity, providing explanation for epidemiological studies on the health effect of ambient PM2.5 and cold stress.

Description: This paper presents a detailed description of an approach designed to investigate the application of the Health Impact Assessment (HIA) framework to assess the potential health impacts of climate change. A HIA framework has been combined with key climate change terminology and concepts. The fundamental premise of this framework is an understanding of the interactions between people, the environment and climate. The diversity and complexity of these interactions can hinder much needed action on the critical health issue of climate change. The objectives of the framework are to improve the methodology for understanding and assessing the risks associated with potential health impacts of climate change, and to provide decision-makers with information that can facilitate the development of effective adaptation plans. While the process presented here provides guidance with respect to this task it is not intended to be prescriptive. As such, aspects of the process can be amended to suit the scope and available resources of each project. A series of working tables has been developed to assist in the collation of evidence throughout the process. The framework has been tested in a number of locations including Western Australia, Solomon Islands, Vanuatu and Nauru.

Description: Publication date: Available online 12 November 2014 Source: Geoscience Frontiers Author(s): Wengang Zhang , Anthony T.C. Goh Piles are long, slender structural elements used to transfer the loads from the superstructure through weak strata onto stiffer soils or rocks. For driven piles, the impact of the piling hammer induces compression and tension stresses in the piles. Hence, an important design consideration is to check that the strength of the pile is sufficient to resist the stresses caused by the impact of the pile hammer. Due to its complexity, pile drivability lacks a precise analytical solution with regard to the phenomena involved. In situations where measured data or numerical hypothetical results are available, neural networks stand out in mapping the nonlinear interactions and relationships between the system's predictors and dependent responses. In addition, unlike most computational tools, no mathematical relationship assumption between the dependent and independent variables has to be made. Nevertheless, neural networks have been criticized for their long trial-and-error training process since the optimal configuration is not known a priori. This paper investigates the use of a fairly simple nonparametric regression algorithm known as multivariate adaptive regression splines (MARS), as an alternative to neural networks, to approximate the relationship between the inputs and dependent response, and to mathematically interpret the relationship between the various parameters. In this paper, the Back propagation neural network (BPNN) and MARS models are developed for assessing pile drivability in relation to the prediction of the Maximum compressive stresses (MCS), Maximum tensile stresses (MTS), and Blow per foot (BPF). A database of more than four thousand piles is utilized for model development and comparative performance between BPNN and MARS predictions. Graphical abstract

Description: Publication date: Available online 18 November 2014 Source: Geoscience Frontiers Author(s): Fei Gao , Lily Wang , Mudan Yin

Description: Publication date: Available online 20 November 2014 Source: Geoscience Frontiers Author(s): I.V. Ashchepkov , A.M. Logvinova , T. Ntaflos , L.F. Reimers , Z.V. Spetsius , N.V. Vladykin , D.S. Yudin , A.V. Travin , H. Downes , V.S. Palesskiy Heavy mineral concentrate and xenoliths from late autolithic breccia and porphyritic kimberlite of the Sytykanskaya pipe (Alakit field, Yakutia, Russia) were studied by EPMA and LA-ICPMS methods to obtain PTXfO 2 diagrams. Trends in P- Fe# - CaO - fO 2 for minerals from the porphyritic kimberlite show greater discontinuities than xenocrysts from the breccia. Xenoliths show the widest variation at all pressures. Protokimberlite systems are marked by ilmenite PT points that range from the lithosphere base (7.5 GPa) to a pyroxenite lens situated at intermediate depths (5 - 3.5 GPa) with increasing Cr because of AFC that formed two metasomatic groups with differing Fe#Ol (∼ 10-12 and 13-15). The first Opx-Gar-based mantle geotherm for the Alakit field based on 10 mineral associations is close to the 35 mW/m 2 geotherm at 6.5 GPa and 600 ° C, i.e. near to the Moho. The oxidation state for the megacrystalline ilmenites in the lithosphere base is higher than for other kimberlites in Yakutia. Calculated parental melts for clinopyroxene and garnet by xenocrysts from the breccia show highly inclined linear REE patterns with deep HFSE troughs similar to differentiated protokimberlite magmas. Melts calculated for metasomatic xenoliths have less inclined slopes without troughs in spider diagrams. Garnets reveal S-shaped REE patterns. Calculated melts for garnets from graphite-bearing Cr-websterites located mainly in middle part of the mantle column show slightly inclined convex REE patterns and Ba-Sr troughs with variable enrichment in Nb-Ta-U. The calculated parental melts for clinopyroxenes have inclined REE spectra with a depression in HFSE. Metasomatic clinopyroxenes have enriched patterns with Ba, Zr peaks. 40 Ar- 39 Ar analyses of dispersed phlogopites from the Alakit mantle xenoliths yield a Proterozoic (1154 Ma) age, corresponding to continental arc metasomatism. Alkaline and Ti-rich veins with alkali amphiboles close to richterite formed at ∼1015 Ma and mark a plume event in Rodinia mantle. The∼600-550 Ma stage relates to Rodinia break-up. The last metasomatic event near 385 Ma is related to the protokimberlite. Graphical abstract

Description: Charge generation in a typical intermediate connector, composed of “n-type doped layer/transition metal oxide (TMO)/hole transporting layer (HTL),” of a tandem organic light-emitting device (OLED) has recently been found to arise from charge transfer at the TMO/HTL interfaces. In this paper, we investigate the effect of hole injection barriers from intermediate connectors on the performance of tandem OLEDs. The hole injection barriers are caused by the offset of the highest occupied molecular orbital (HOMO) energy levels between HTLs contained in the intermediate connector and the top electroluminescence (EL) unit. We also find that although charge generation can occur at the interfaces between the TMO and a wide variety of HTLs of different HOMO values, an increase in the hole injection barrier however limits the electroluminescence efficiency of the top EL units. In the case of large hole injection barriers, significant charge accumulation in the HTLs makes the intermediate connector lose its functionality gradually over operating time, and limits device stability.

Description: Spin-dependent transport properties in CoFe/MgO/n + -Si junctions were investigated by Hanle effect measurements and inelastic electron tunneling (IET) spectroscopy. The CoFe/MgO/n + -Si junctions examined in this study exhibited two different Hanle curves. In the low bias region, broad Hanle signals were mainly observed; in the high bias region, narrow Hanle signals were mainly observed. The d 2 I / dV 2 - V curves (which correspond to IET spectra) contain several peaks originating from phonon modes and other peaks originating from electron trap states. At the bias voltage where electron trap states are observed, Δ d 2 I / dV 2 depends on the magnetic field and the full width at half-maximum of the Δ d 2 I / dV 2 – H curves corresponds to that of the broad Hanle signals. These results indicate that electron trap states are located in the low energy region and cause a decrease in spin lifetime.

Description: We elucidate a strong room temperature stimulated emission (SE) of In 0.17 Ga 0.83 N epilayer grown by molecular beam epitaxy under the subpicosecond pulse excitation. The SE peak at 428 nm emerges on the higher energy side of the spontaneous emission in photoluminescence spectra when the excitation density exceeds the threshold of ∼3.68 mJ/cm 2 . Nondegenerate transient differential reflectivity measurements show that a multi-stage carrier thermalization from excited states to localized edge states and stimulated emission dominate the decay processes of photogenerated carriers under various excitation densities. Our results indicate that the existence of phonon bottleneck effect could result in a slow thermalization process in the InGaN material even under the condition of stimulated emission.

Description: The relationship between carrier concentration and donor atomic concentration has been determined in n -type Ge films doped with P. The samples were carefully engineered to minimize non-active dopant incorporation by using specially designed P(SiH 3 ) 3 and P(GeH 3 ) 3 hydride precursors. The in situ nature of the doping and the growth at low temperatures, facilitated by the Ge 3 H 8 and Ge 4 H 10 Ge sources, promote the creation of ultra-low resistivity films with flat doping profiles that help reduce the errors in the concentration measurements. The results show that Ge deviates strongly from the incomplete ionization expected when the donor atomic concentration exceeds N d  = 10 17  cm −3 , at which the energy separation between the donor and Fermi levels ceases to be much larger than the thermal energy. Instead, essentially full ionization is seen even at the highest doping levels beyond the solubility limit of P in Ge. The results can be explained using a model developed for silicon by Altermatt and coworkers, provided the relevant model parameter is properly scaled. The findings confirm that donor solubility and/or defect formation, not incomplete ionization, are the major factors limiting the achievement of very high carrier concentrations in n -type Ge. The commercially viable chemistry approach applied here enables fabrication of supersaturated and fully ionized prototypes with potential for broad applications in group-IV semiconductor technologies.

Description: We developed a T-gate technology based on selective wet etching yielding 200 nm wide T-gate structures used for fabrication of High Electron Mobility Transistors (HEMT). Major advantages of our process are the use of only standard photolithographic process and the ability to generate T-gate stacks. A HEMT fabricated on AlGaN/GaN/sapphire with gate length L g  = 200 nm and double-stacked T-gates exhibits 60 GHz cutoff frequency showing ten-fold improvement compared to 6 GHz for the same device with 2  μ m gate length. HEMTs with a double-level-T-gate (DLTG) structure exhibit up to 35% improvement of f max value compared to a single T-gate device. This indicates a significant reduction of skin effect losses in DLTG structure compared to its standard T-gate counterpart. These results agree with the theoretical predictions.

Description: This investigation analyzes the effect of vortex wakes on the Lagrangian displacement of particles induced by the passage of an obstacle in a two-dimensional incompressible and inviscid fluid. In addition to the trajectories of individual particles, we also study their drift and the corresponding total drift areas in the Föppl and Kirchhoff potential flow models. Our findings, which are obtained numerically and in some regimes are also supported by asymptotic analysis, are compared to the wakeless potential flow which serves as a reference. We show that in the presence of the Föppl vortex wake, some of the particles follow more complicated trajectories featuring a second loop. The appearance of an additional stagnation point in the Föppl flow is identified as a source of this effect. It is also demonstrated that, while the total drift area increases with the size of the wake for large vortex strengths, it is actually decreased for small circulation values. On the other hand, the Kirchhoff flow model is shown to have an unbounded total drift area. By providing a systematic account of the wake effects on the drift, the results of this study will allow for more accurate modeling of hydrodynamic stirring.

Description: The magnetic configuration of Mn 2 NiAl ribbon has been investigated. In contrast to Ni 2 MnAl, the compound Mn 2 NiAl with considerable disorder does exhibit ferromagnetism and, due to exchange interaction competition, both ferromagnetic and antiferromagnetic moment orientations can coexist between nearest neighbor Mn atoms. This is unexpected in Heusler alloys. Regarding the mechanism of the martensitic transformation in Mn 50 Ni 50− x Al x , it is found that increasing the Al content results in an unusual change in the lattice constant, a decrease of the transformation entropy change, and enhancement of the calculated electron localization. These results indicate that the p-d covalent hybridization between Mn (or Ni) and Al atoms gradually increases at the expense of the d-d hybridization between Ni and Mn atoms. This leads to an increased stability of the austenite phase and a decrease of the martensitic transformation temperature. For 11 ≤  x  ≤ 14, Mn 50 Ni 50− x Al x ferromagnetic shape memory alloys are obtained.

Description: Electrowetting (EW) has applications including displays, microactuation, miniaturized chemistry, adaptive optics, and energy harvesting—understanding the physics of EW junctions is of key importance. Here, the roles of semiconductor space-charge and electric double layer in continuous EW at an electrolyte-insulator-semiconductor junction are considered. A model is formulated in terms of experimental parameters—applied voltage, zero-bias wetting contact angle, semiconductor type and doping, insulator thickness and dielectric constant, and electrolyte concentration and dielectric constant. The model predicts, and experiments indicate, that the EW behavior is diminished for low concentration solutions (∼1–10 nM) and lowly doped silicon (10 14 –10 15  cm −3 ).

Description: The dynamics of the magnetic relaxation process during the sustainment of spheromak configurations at different helicity injection rates is studied. The three-dimensional activity is recovered using time-dependent resistive magnetohydrodynamic simulations. A cylindrical flux conserver with concentric electrodes is used to model configurations driven by a magnetized coaxial gun. Magnetic helicity is injected by tangential boundary flows. Different regimes of sustainment are identified and characterized in terms of the safety factor profile. The spatial and temporal behavior of fluctuations is described. The dynamo action is shown to be in close agreement with existing experimental data. These results are relevant to the design and operation of helicity injected devices, as well as to basic understanding of the plasma relaxation mechanism in quasi-steady state.

Description: The present experiments were performed on the PF-1000 plasma focus device at a current of 2 MA with the deuterium injected from the gas-puff placed in the axis of the anode face. The XUV frames showed, in contrast with the interferograms, the fine structure: filaments and spots up to 1 mm diameter. In the deuterium filling, the short filaments are registered mainly in the region of the internal plasmoidal structures and their number correlates with the intensity of neutron production. The longer filamentary structure was recorded close to the anode after the constriction decay. The long curve-like filaments with spots were registered in the big bubble formed after the pinch phase in the head of the umbrella shape of the plasma sheath. Filaments can indicate the filamentary structure of the current in the pinch. Together with the filaments, small compact balls a few mm in diameter were registered by both interferometry and XUV frame pictures. They emerge out of the dense column and their life-time can be greater than hundreds of ns.

Description: The radiation pressure acceleration of protons in the interaction of Gaussian laser pulses and surface modulated targets is examined by multi-dimensional particle-in-cell simulations. It is shown that strong longitudinal quasi-static magnetic field is generated on the modulated surface of the target, which significantly enhances the transverse diffusion of electrons. This is beneficial for suppressing the transverse Rayleigh-Taylor instability. Finally, the surface of the accelerated proton beams becomes smoother than that in the case of the planar target, and a final mono-energetic proton beam is obtained by using the surface modulated target.

Description: We have studied the impact dynamics of non-Newtonian droplets containing poly-(ethylene oxide) (PEO) by using a high speed camera. To get a deeper insight into the droplet-substrate interaction on droplet impact behavior, both the bare droplet and the liquid marbles have been investigated. The usually observed anti-rebound phenomenon caused by the PEO additives can be rejuvenated by enwrapment of droplets with nanoparticles. The presence of PEO in bare droplets greatly enhances the contact line friction and leads to irreversible impalement of the surface structure. Whereas for liquid marbles, the nanoparticle shell on the droplet surface inhibits the impalement. Our results clearly demonstrate that it is the droplet-substrate friction rather than the bulk rheological properties of the liquid that plays the essential role in the anti-rebound effect.

Description: One of the most uncertain parameters in stepped spillway design is the length (from the crest) of boundary layer development. The normal velocity profiles responding to the steps as bed roughness are investigated in the developing non-aerated flow region. A detailed analysis of the logarithmic vertical velocity profiles on stepped spillways is conducted through experimental data to verify the computational code and numerical experiments to expand the data available. To determine development length, the hydraulic roughness and displacement thickness, along with the shear velocity, are needed. This includes determining displacement height d and surface roughness length z0 and the relationship of d and z0 to the step geometry. The results show that the hydraulic roughness height ks is the primary factor on which d and z0 depend. In different step height, step width, discharge and intake Froude number, the relations d/ks = 0.22–0.27, z0/ks = 0.06–0.1 and d/z0 = 2.2–4 result in a good estimate. Using the computational code and numerical experiments, air inception will occur over stepped spillway flow as long as the Bauer-defined boundary layer thickness is between 0.72 and 0.79.

Description: A regional-level and dimensionless analysis for designing a domestic rainwater harvesting system (DRWHS) was developed. To consider various combinations of water demand, storage capacity, effective roof area, and rainfall in DRWHS design, two dimensionless ratios were used, namely, demand fraction and storage fraction, along with a relationship between the two ratios. Firstly, Northern Taiwan was divided into four sub-regions through cluster analysis based on the average annual 10-day rainfall distribution at rainfall stations and administrative districts. Easy-to-use dimensionless curves between demand fraction and storage fraction were obtained for five rainwater supply reliabilities of the DRWHS for the four sub-regions. Based on the dimensionless curves, a nomogram was constructed for designing DRWHSs at a rainwater supply reliability of 95% in the sub-region I. Storage capacities determined from the dimensionless curves showed a close fit with those determined from simulated values, but were larger than the values estimated from the method presented in the Green Building Evaluation Manual in most situations. The methodology developed herein can be used effectively for the preliminary design of a DRWHS and for overcoming the difficulties faced in designing a DRWHS without rainfall data and with incomplete rainfall data.

Description: The dependence of divertor asymmetry and scrape-off layer (SOL) flow on heating power has been investigated in the Experimental Advanced Superconducting Tokamak (EAST). Divertor plasma exhibits an outboard-enhanced in-out asymmetry in heat flux in lower single null configuration for in reversed (ion ∇ B drift direction toward the upper X-point) field directions. Upper single null exhibits an inboard-favored asymmetry in low heating power condition, while exhibits an outboard-favored asymmetry when increasing the heating power. Double null has the strongest in-out asymmetry in heat flux, favoring the outer divertor. The in-out asymmetry ratios of q t , out / q t , in and P out / P total increase with the power across the separatrix P loss , which is probably induced by the enhanced radial particle transport due to a large pressure gradient. The characteristics of the measured SOL parallel flow under various discharge conditions are consistent with the Pfirsch-Schlüter (PS) flow with the parallel Mach number M ∥ decreasing with the line averaged density but increasing with P loss , in the same direction as the PS flow. The contributions of both poloidal E × B drift and parallel flow on poloidal particle transport in SOL on EAST are also assessed.

Description: Magnetic islands have been implemented in the gyrokinetic toroidal code to study the effects of the islands on microturbulence. The pressure profile flattening is verified in the simulation with the islands. Simulations of ion temperature gradient instability find that different toroidal modes are linearly coupled together and that toroidal spectra become broader when the island width increases. The real frequencies and growth rates of different toroidal modes approach each other with the averaged value independent of the island width. The linear mode structures are enhanced at the island separatrices and weakened at the island centers, consistent with the flattening of the pressure profile inside the islands.

Description: The slow motion of a circular cylinder in a plane Poiseuille flow in a microchannel is analyzed for a wide range of cylinder radii and positions across the channel. The cylinder translates parallel to the channel walls and rotates about its axis. The Stokes approximation is used and the problem is solved analytically using the Papkovich-Fadle eigenfunction expansion and the least-squares method. The stream function and the pressure distribution of the flow field are obtained as results. The force and moment exerted on the cylinder, and the pressure change far from the cylinder, are calculated and shown as functions of the size and location of the cylinder. The results confirm some reciprocal relations exactly. In particular, the translational and rotational velocities of the drifting cylinder in the existing Poiseuille flow are determined. The induced pressure change, when the cylinder drifts in the Poiseuille flow, is also calculated. Some typical streamline patterns, depending on the size and location of the cylinder, are shown and discussed. When the cylinder translates and/or rotates in the channel blocked at infinity, a series of Moffatt eddies appears far from the cylinder in the channel, as expected.

Description: Interactions between capillary and elastic effects are relevant to a variety of applications from micro- and nano-scale manufacturing to biological systems. In this work, we investigate capillary flows in flexible, millimeter-scale cylindrical elastic tubes. We demonstrate that surface tension can cause sufficiently flexible tubes to collapse and coalesce spontaneously through non-axisymmetric buckling, and develop criteria for the initial deformation and complete collapse of a circular tube. Experimental results for capillary rise and evaporation of a liquid in a flexible tube are presented, and several regimes are seen for the equilibrium state of a flexible tube deforming under capillary pressure. Deformations of the tube walls are measured in different regimes and compared with a shell theory model. Analysis and experimental results show that despite the complex and non-axisymmetric deformed shapes of cylindrical structures, the elastocapillary length used in previous literature for flat plates and sheets can be used to predict the behavior of flexible tubes.

Description: A study is presented for the oblique propagation of ion acoustic cnoidal waves in a magnetized plasma consisting of cold ions and two temperature superthermal electrons modelled by kappa-type distributions. Using the reductive perturbation method, the nonlinear Korteweg de-Vries equation is derived, which further gives the solutions with a special type of cnoidal elliptical functions. Both compressive and rarefactive structures are found for these cnoidal waves. Nonlinear periodic cnoidal waves are explained in terms of plasma parameters depicting the Sagdeev potential and the phase curves. It is found that the density ratio of hot electrons to ions μ significantly modifies compressive/refractive wave structures. Furthermore, the combined effects of superthermality of cold and hot electrons κ c , κ h , cold to hot electron temperature ratio σ , angle of propagation and ion cyclotron frequency ω ci have been studied in detail to analyze the height and width of compressive/refractive cnoidal waves. The findings in the present study could have important implications in understanding the physics of electrostatic wave structures in the Saturn's magnetosphere where two temperature superthermal electrons are present.

Description: A smart monitoring system for superconducting cable test is proposed with an adaptive current control of a superconducting transformer secondary. The design, based on Fuzzy Gain Scheduling, allows the controller parameters to adapt continuously, and finely, to the working variations arising from transformer nonlinear dynamics. The control system is integrated in a fully digital control loop, with all the related benefits, i.e., high noise rejection, ease of implementation/modification, and so on. In particular, an accurate model of the system, controlled by a Fuzzy Gain Scheduler of the superconducting transformer, was achieved by an experimental campaign through the working domain at several current ramp rates. The model performance was characterized by simulation, under all the main operating conditions, in order to guide the controller design. Finally, the proposed monitoring system was experimentally validated at European Organization for Nuclear Research (CERN) in comparison to the state-of-the-art control system [P. Arpaia, L. Bottura, G. Montenero, and S. Le Naour, “Performance improvement of a measurement station for superconducting cable test,” Rev. Sci. Instrum.83, 095111 (2012)] of the Facility for the Research on Superconducting Cables, achieving a significant performance improvement: a reduction in the system overshoot by 50%, with a related attenuation of the corresponding dynamic residual error (both absolute and RMS) up to 52%.

Description: This paper presents a method which uses the characteristics of the etch pits induced in a polyallyl-diglycol-carbonate (PADC) detector of the CR-39/PM-355 type to estimate particle energy. This method is based on the data provided by a semiautomatic system that selects tracks according to two parameters, crater diameters, and mean gray level values. In this paper we used the results of the calibration measurements that were obtained in our laboratory in the period 2000–2014. Combining the information on the two parameters it is possible to determine unambiguously the incident projectile energy values. The paper presents the results of an attempt to estimate the energy resolution of the method when analyzing the tracks produced in the CR-39/PM-355 detector by energetic ions such as alpha particles, protons, and deuterons. We discuss the energy resolution of the measurement of light charged particle energy which is based on the parameters (crater diameter and mean gray level value) of tracks induced in solid state nuclear track detectors of the PADC type.

Description: In this work, an automated apparatus for driving single electrostatic probes and acquiring the plasma-related data has been designed and fabricated. The voltage range of the present system is ±110 V with an adjustable voltage step as low as 3 mV. Voltage and current measurements are carried out with high resolution and high accuracy circuits, both based on 16 bit analog-to-digital converters. The code embedded in a micro-controller, schedules the operation of the device and transfers the experimental data to a personal computer. The modular design of the system makes possible its modification and thus increases its adaptability to different plasma setups. Finally, the reliable operation of the entire device is confirmed by tests in Electron Cyclotron Resonance plasma.

Description: For magnon spintronic applications, the detailed knowledge of spin wave (SW) beam dispersion, transmission (reflection) of SWs passing through (reflected from) interfaces, or borders or the scattering of SWs by inhomogeneities is crucial. These wave properties are decisive factors on the usefulness of a particular device. Here, we demonstrate, using micromagnetic simulations supported by an analytical model, that the Goos-Hänchen (GH) shift exists for SW reflecting from thin film edge and that with the effect becomes observable. We show that this effect will exist for a broad range of frequencies in the dipole-exchange range, with the magnetization degree of pinning at the film edge as the crucial parameter, whatever its nature. Moreover, we have also found that the GH effect can be accompanied or even dominating by a bending of the SW beam due to the inhomogeneity of the internal magnetic field. This inhomogeneity, created by demagnetizing field taking place at the film edge, causes gradual change of SWs refractive index. The refraction of the SW beams by the non-uniformity of the magnetic field enables the exploration of graded index magnonics and metamaterial properties for the transmission and processing of information at nanoscale.

Description: As a non-magnetic heavy metal is attached to a ferromagnet, a vertically flowing heat-driven spin current is converted to a transverse electric voltage, which is known as the longitudinal spin Seebeck effect (SSE). If the ferromagnet is a metal, this voltage is also accompanied by voltages from two other sources, i.e., the anomalous Nernst effect in both the ferromagnet and the proximity-induced ferromagnetic boundary layer. By properly identifying and carefully separating those different effects, we find that in this pure spin current circuit the additional spin current drawn by the heavy metal generates another significant voltage by the ferromagnetic metal itself which should be present in all relevant experiments.

Description: We introduce a confocal shift-interferometer based on optical fibers. The presented spectroscopy allows measuring coherence maps of luminescent samples with a high spatial resolution even at cryogenic temperatures. We apply the spectroscopy onto electrostatically trapped, dipolar excitons in a semiconductor double quantum well. We find that the measured spatial coherence length of the excitonic emission coincides with the point spread function of the confocal setup. The results are consistent with a temporal coherence of the excitonic emission down to temperatures of 250 mK.

Description: We demonstrate enhanced hydrogen generation rates at high pH using colloidal cadmium sulphide nanorods decorated with Pt nanoparticles. We introduce a simplified procedure for the decoration and subsequent hydrogen generation, reducing both the number of working steps and the materials costs. Different Pt precursor concentrations were tested to reveal the optimal conditions for the efficient hydrogen evolution. A sharp increase in hydrogen evolution rates was measured at pH 13 and above, a condition at which the surface charge transfer was efficiently mediated by the formation of hydroxyl radicals and further consumption by the sacrificial triethanolamine hole scavenger.

Description: Spatial gaps between grains and other grains, substrates, or electrodes in organic electronic devices are one of the causes of the reduction in the electrical characteristics. In this study, we demonstrate that cold isostatic pressing (CIP) is an effective method to crush the gaps and enhance the electrical characteristics. CIP of metal-free phthalocyanine (H 2 PC) films induced a decrease in the film thickness by 34%–40% because of the gap crush. The connection of smaller grains into a larger grain and planarization of the film surface were also observed in the CIP film. The crystal axes of the H 2 PC crystallites were rearranged from the a-axis to the c-axis of the α-phase crystal structure in a direction perpendicular to the substrate by CIP, indicating favorable hole injection and transport in this direction because of a better overlap of π orbitals. Thermally stimulated current measurements showed that deep hole traps disappeared and the total hole-trap density decreased after CIP. These CIP-induced changes of the film thicknesses, crystal axes and the hole traps lead to a marked increase in the hole mobility of the H 2 PC films from 2.0 × 10 −7 to 4.0 × 10 −4 cm 2 /V s by 2000 times in the perpendicular direction. We believe that these findings are important for unveiling the underlying carrier injection and transport mechanisms of organic films and for enhancing the performance of future organic electronic devices.

Description: Anomalous Hall effect (AHE) based ferromagnetic resonance (FMR) measurements were carried out on perpendicularly magnetized Co/Pt multilayer single dots of 0.4–3  μ m in diameter. The resonance behavior was measured by detecting the decrease of perpendicular magnetization component due to magnetization precession. Resonance behavior was observed as a clear decrease of Hall voltages, and the obtained resonance fields were consistent with the results of vector-network-analyzer FMR. Spin-waves with cylindrical symmetry became significant by decreasing the dot diameter, and quantized multiple resonances were observed in the dot of 0.4 μm in diameter. The AHE based FMR proposed here is a powerful method to approach magnetization dynamics including spin waves and non-linear behavior excited in a finite nanostructure.

Description: Three ideal point-based multi-criteria decision methods (MCDM), i.e., iterative ideal point thresholding (IIPT), compromise programming (CP) and a newly-proposed CP variant, called balanced compromise programming (BCP), were applied to the Tabacay catchment in Ecuador with the aim of finding a distribution of land use types (LUT) that optimizes regional land performance. This performance was expressed in terms of several conflicting on-site ecosystem services (ESS), namely water conservation, soil protection, carbon storage and monetary income. IIPT selects the best performing LUT on a per-land unit basis, that is the assignment of a LUT to a land unit is completely independent with respect to other land units. CP and BCP, on the other hand, aim at optimizing the integrated regional performance. These methods produce a LUT distribution that is as close as possible to the absolute optimal performance that would be achieved when conflict among ESS is not considered. In general, similar results were obtained with CP and BCP. This was not the case when the results produced by these two methods were contrasted with IIPT. For most ESS under consideration, CP and BCP produced balanced results that were closer to the absolute optimal values when compared to IIPT. We conclude from our results that, when optimization of land performance at a regional scale is at stake, CP-derived models emerge as the preferable option over IIPT, especially when balanced solutions are a requirement.

Description: Current understanding of aspen fire ecology in western North America includes the paradoxical characterization that aspen-dominated stands, although often regenerated following fire, are “fire-proof”. We tested this idea by predicting potential fire behavior across a gradient of aspen dominance in northern Utah using the Forest Vegetation Simulator and the Fire and Fuels Extension. The wind speeds necessary for crowning (crown-to-crown fire spread) and torching (surface to crown fire spread) were evaluated to test the hypothesis that predicted fire behavior is influenced by the proportion of aspen in the stand. Results showed a strong effect of species composition on crowning, but only under moderate fire weather, where aspen-dominated stands were unlikely to crown or torch. Although rarely observed in actual fires, conifer-dominated stands were likely to crown but not to torch, an example of “hysteresis” in crown fire behavior. Results support the hypothesis that potential crown fire behavior varies across a gradient of aspen dominance and fire weather, where it was likely under extreme and severe fire weather, and unlikely under moderate and high fire weather. Furthermore, the “fire-proof” nature of aspen stands broke down across the gradient of aspen dominance and fire weather.

Description: We introduce a method for generating rational extensions of time-dependent potentials, such that the associated Schrödinger equation admits solutions in terms of exceptional orthogonal polynomials. Our method is applicable to position-dependent Schrödinger equations, as well as to their conventional counterparts for constant mass.

Description: In this paper, we prove the existence of the Stark-Wannier quantum resonances for one-dimensional Schrödinger operators with smooth periodic potential and small external homogeneous electric field. Such a result extends the existence result previously obtained in the case of periodic potentials with a finite number of open gaps.

Description: We study four citrate synthase homodimeric proteins within a structure-based coarse-grained model. Two of these proteins come from thermophilic bacteria, one from a cryophilic bacterium and one from a mesophilic organism; three are in the closed and two in the open conformations. Even though the proteins belong to the same fold, the model distinguishes the properties of these proteins in a way which is consistent with experiments. For instance, the thermophilic proteins are more stable thermodynamically than their mesophilic and cryophilic homologues, which we observe both in the magnitude of thermal fluctuations near the native state and in the kinetics of thermal unfolding. The level of stability correlates with the average coordination number for amino acid contacts and with the degree of structural compactness. The pattern of positional fluctuations along the sequence in the closed conformation is different than in the open conformation, including within the active site. The modes of correlated and anticorrelated movements of pairs of amino acids forming the active site are very different in the open and closed conformations. Taken together, our results show that the precise location of amino acid contacts in the native structure appears to be a critical element in explaining the similarities and differences in the thermodynamic properties, local flexibility, and collective motions of the different forms of the enzyme.

Description: We give an algorithm which produces a unique element of the Clifford group on n qubits ( C n ) from an integer 0 ≤ i 〈 C n (the number of elements in the group). The algorithm involves O ( n 3 ) operations and provides, in addition to a canonical mapping from the integers to group elements g , a factorization of g into a sequence of at most 4 n symplectic transvections. The algorithm can be used to efficiently select random elements of C n which are often useful in quantum information theory and quantum computation. We also give an algorithm for the inverse map, indexing a group element in time O ( n 3 ).

Description: We present laboratory experimental results demonstrating that librational forcing of an ellipsoidal container of water can produce intense motions through the mechanism of a libration driven elliptical instability (LDEI). These libration studies are conducted using an ellipsoidal acrylic container filled with water. A particle image velocimetry method is used to measure the 2D velocity field in the equatorial plane over hundreds libration cycles for a fixed Ekman number, E = 2 × 10 −5 . In doing so, we recover the libration induced base flow and a time averaged zonal flow. Further, we show that LDEI in non-axisymmetric container geometries is capable of driving both intermittent and saturated turbulent motions in the bulk fluid. Additionally, we measure the growth rate and amplitude of the LDEI induced excited flow in a fully ellipsoidal container at more extreme parameters than previously studied [Noir et al. , “Experimental study of libration-driven flows in nonaxisymmetric containers,” Phys. Earth Planet. Inter. 204-205 , 1 (2012); Cébron et al. , Phys. Fluids 24 , 061703, “Libration driven elliptical instability,” (2012)]. Excitation of bulk filling turbulence by librational forcing provides a mechanism for transferring rotational energy into turbulent fluid motion and thus can play an important role in the thermal evolution, interior dynamics, and magneto-hydrodynamics of librating bodies, as appear to be common in solar system settings [e.g., Comstock and Bills, “A solar system survey of forced librations in longitude,” J. Geophys. Res. Planets 108 , 1 (2003)].

Description: We numerically study the displacement flow of two iso-viscous Newtonian fluids in an inclined two-dimensional channel, formed by two parallel plates. The results are complementary to our previous studies on displacement flows in pipes and channels. The heavier displacing fluid moves the lighter displaced fluid in the downward direction. Three dimensionless groups largely describe these flows: the densimetric Froude number ( Fr ), the Reynolds number ( Re ), and the duct inclination (β). As a first order approximation, we are able to classify different flow regimes phenomenologically in a two-dimensional ( Fr ; Re cosβ/ Fr )-plane and provide leading order expressions for the transitions between different regimes. The stabilizing and/or de-stabilizing effects of the imposed mean flow on buoyant exchange flows (zero imposed velocity) are described for a broad range of dimensionless parameters.

Description: Compressible granular materials are involved in many applications, some of them being related to energetic porous media. Gas permeation effects are important during their compaction stage, as well as their eventual chemical decomposition. Also, many situations involve porous media separated from pure fluids through two-phase interfaces. It is thus important to develop theoretical and numerical formulations to deal with granular materials in the presence of both two-phase interfaces and gas permeation effects. Similar topic was addressed for fluid mixtures and interfaces with the Discrete Equations Method (DEM) [R. Abgrall and R. Saurel, “Discrete equations for physical and numerical compressible multiphase mixtures,” J. Comput. Phys. 186 (2), 361-396 (2003)] but it seemed impossible to extend this approach to granular media as intergranular stress [K. K. Kuo, V. Yang, and B. B. Moore, “Intragranular stress, particle-wall friction and speed of sound in granular propellant beds,” J. Ballist. 4 (1), 697-730 (1980)] and associated configuration energy [J. B. Bdzil, R. Menikoff, S. F. Son, A. K. Kapila, and D. S. Stewart, “Two-phase modeling of deflagration-to-detonation transition in granular materials: A critical examination of modeling issues,” Phys. Fluids 11 , 378 (1999)] were present with significant effects. An approach to deal with fluid-porous media interfaces was derived in Saurel et al. [“Modelling dynamic and irreversible powder compaction,” J. Fluid Mech. 664 , 348-396 (2010)] but its validity was restricted to weak velocity disequilibrium only. Thanks to a deeper analysis, the DEM is successfully extended to granular media modelling in the present paper. It results in an enhanced version of the Baer and Nunziato [“A two-phase mixture theory for the deflagration-to-detonation transition (DDT) in reactive granular materials,” Int. J. Multiphase Flow 12 (6), 861-889 (1986)] model as symmetry of the formulation is now preserved. Several computational examples are shown to validate and illustrate method’s capabilities.

Description: We perform a theoretical and numerical study of the Coulomb-driven electroconvection flow of a dielectric liquid between two coaxial cylinders. The specific case, where the inner to outer diameter ratio is 0.5, is analyzed. A strong unipolar injection of ions either from the inner or outer cylinder is considered to introduce free charge carriers into the system. A finite volume method is used to solve all governing equations including Navier-Stokes equations and a simplified set of Maxwell’s equations. The flow is characterized by a subcritical bifurcation in the finite amplitude regime. A linear stability criterion and a nonlinear one that correspond to the onset and stop of the flow motion, respectively, are linked with a hysteresis loop. In addition, we also explore the behavior of the system for higher values of the stability parameter. For inner injection, we observe a transition between the patterns made of 7 and 8 cells, before an oscillatory regime is attained. Such a transition leads to a second finite amplitude stability criterion. A simple modal analysis reveals that the competition of different modes is at the origin of this behavior. The charge density, as well as velocity field distributions is provided to help understand the bifurcation behavior.

Description: We report on the production of metal ions of magnesium and zinc in the beam plasma formed by a forevacuum-pressure electron source. Magnesium and zinc vapor were generated by electron beam evaporation from a crucible and subsequently ionized by electron impact from the e-beam itself. Both gaseous and metallic plasmas were separately produced and characterized using a modified RGA-100 quadrupole mass-spectrometer. The fractional composition of metal isotopes in the plasma corresponds to their fractional natural abundance.

Description: To better understand the role of residual electrons in the repeatability of an atmospheric pressure plasma plume, the characteristics of a helium plasma jet from the 1st, 2nd,… until the repeatable discharge pulse are investigated for the first time. It's found that the longest plasma plume is achieved in the 1st discharge pulse. The length of the plasma plume becomes shorter and shorter and reaches a constant value in the 3rd discharge pulse and keeps the same for the following pulses. The dynamics of the 1st discharge pulse show that the plasma bullet appears random in nature. Two photomultiplier tubes are used to distinguish the two potential factors that could result in the stochastic dynamics of the plasma bullet, i.e., stochastic ignition of the plasma and the stochastic propagation velocity. The results show that the stochastic propagation velocity occurs only in the 1st and the 2nd discharge pulses, while the stochastic ignition of the plasma presents until the 100th pulse. The dynamics of the plasma propagation become repeatable after about 100 pulses. Detail analysis shows that the repeatability of plasma bullet is due to the residual electrons density. The residual electron density of 10 9  cm −3 or higher is needed for repeatable discharges mode.

Description: We present a full two-fluid magnetohydrodynamic (MHD) description for a completely ionized hydrogen plasma, retaining the effects of the Hall current, electron pressure, and electron inertia. According to this description, each plasma species introduces a new spatial scale: the ion inertial length λ i and the electron inertial length λ e , which are not present in the traditional MHD description. In the present paper, we seek for possible changes in the energy power spectrum in fully developed turbulent regimes, using numerical simulations of the two-fluid equations in two-and-a-half dimensions. We have been able to reproduce different scaling laws in different spectral ranges, as it has been observed in the solar wind for the magnetic energy spectrum. At the smallest wavenumbers where plain MHD is valid, we obtain an inertial range following a Kolmogorov k −5∕3 law. For intermediate wavenumbers such that λ i − 1 ≪ k ≪ λ e − 1 , the spectrum is modified to a k −7∕3 power-law, as has also been obtained for Hall-MHD neglecting electron inertia terms. When electron inertia is retained, a new spectral region given by k 〉 λ e − 1 arises. The power spectrum for magnetic energy in this region is given by a k −11∕3 power law. Finally, when the terms of electron inertia are retained, we study the self-consistent electric field. Our results are discussed and compared with those obtained in the solar wind observations and previous simulations.

Description: A novel mechanism of collisionless heating in large planar arrays of small inductive coils operated at radio frequencies is presented. In contrast to the well-known case of non-local heating related to the transversal conductivity, when the electrons move perpendicular to the planar coil, we investigate the problem of electrons moving in a plane parallel to the coils. Two types of periodic structures are studied. Resonance velocities where heating is efficient are calculated analytically by solving the Vlasov equation. Certain scaling parameters are identified. The concept is further investigated by a single particle simulation based on the ergodic principle and combined with a Monte Carlo code allowing for collisions with Argon atoms. Resonances, energy exchange, and distribution functions are obtained. The analytical results are confirmed by the numerical simulation. Pressure and electric field dependences are studied. Stochastic heating is found to be most efficient when the electron mean free path exceeds the size of a single coil cell. Then the mean energy increases approximately exponentially with the electric field amplitude.

Description: A pulsed slow-positron beam generated by an electron linear accelerator was directly used for positron annihilation lifetime spectroscopy without any positron storage devices. A waveform digitizer was introduced to simultaneously capture multiple gamma-ray signals originating from positron annihilation events during a single accelerator pulse. The positron pulse was chopped and bunched with the chopper signals also sent to the waveform digitizer. Time differences between the annihilation gamma-ray and chopper peaks were calculated and accumulated as lifetime spectra in a computer. The developed technique indicated that positron annihilation lifetime spectroscopy can be performed in a 20 μ s time window at a pulse repetition rate synchronous with the linear accelerator. Lifetime spectra of a Kapton sheet and a thermally grown SiO 2 layer on Si were successfully measured. Synchronization of positron lifetime measurements with pulsed ion irradiation was demonstrated by this technique.

Description: In this study we evaluate the capabilities of three satellite sensors for assessing water composition and bottom depth in Lake Garda, Italy. A consistent physics-based processing chain was applied to Moderate Resolution Imaging Spectroradiometer (MODIS), Landsat-8 Operational Land Imager (OLI) and RapidEye. Images gathered on 10 June 2014 were corrected for the atmospheric effects with the 6SV code. The computed remote sensing reflectance (Rrs) from MODIS and OLI were converted into water quality parameters by adopting a spectral inversion procedure based on a bio-optical model calibrated with optical properties of the lake. The same spectral inversion procedure was applied to RapidEye and to OLI data to map bottom depth. In situ measurements of Rrs and of concentrations of water quality parameters collected in five locations were used to evaluate the models. The bottom depth maps from OLI and RapidEye showed similar gradients up to 7 m (r = 0.72). The results indicate that: (1) the spatial and radiometric resolutions of OLI enabled mapping water constituents and bottom properties; (2) MODIS was appropriate for assessing water quality in the pelagic areas at a coarser spatial resolution; and (3) RapidEye had the capability to retrieve bottom depth at high spatial resolution. Future work should evaluate the performance of the three sensors in different bio-optical conditions.

Description: From a holistic view, this paper addresses a perspective of coordinated development of economy, society, and environment for regional sustainability assessment. Firstly, a comprehensive indicator system for co-evaluating the level of economic, social, and environmental subsystems is presented based on a holistic understanding of regional sustainability. Then, a coordinated development index model focusing on the level of coordination among the subsystems as well as their comprehensive development level is established. Furthermore, an empirical study of all the provinces and municipalities is conducted by collecting the panel data from 2004 to 2010. The result shows that: (1) the coordinated developments of the most developed and the most underdeveloped regions stay stable while the regions with medium development level possess more fluctuant trends during the study years; (2) regional disparities are indicated according to the grading of CDI (the coordinated development index), which are further analyzed to be related to the local economic development patterns; (3) the conditions and causes of economic, social, and environmental development in real situations under different grades of CDI are discussed through detailed case studies of typical regions, which indicate specific suggestions of sustainable development for regions in the same pattern.

Description: As the largest solid waste (SW) generator in the world, China is facing serious pollution issues induced by increasing quantities of SW. The sustainability assessment of SW management is very important for designing relevant policy for further improving the overall efficiency of solid waste management (SWM). By focusing on industrial solid waste (ISW) and municipal solid waste (MSW), the paper investigated the sustainability performance of SWM by applying decoupling analysis, and further identified the main drivers of SW change in China by adopting Logarithmic Mean Divisia Index (LMDI) model. The results indicate that China has made a great achievement in SWM which was specifically expressed as the increase of ISW utilized amount and harmless disposal ratio of MSW, decrease of industrial solid waste discharged (ISWD), and absolute decoupling of ISWD from economic growth as well. However, China has a long way to go to achieve the goal of sustainable management of SW. The weak decoupling, even expansive negative decoupling of ISW generation and MSW disposal suggests that China needs timely technology innovation and rational institutional arrangement to reduce SW intensity from the source and promote classification and recycling. The factors of investment efficiency and technology are the main determinants of the decrease in SW, inversely, economic growth has increased SW discharge. The effects of investment intensity showed a volatile trend over time but eventually decreased SW discharged. Moreover, the factors of population and industrial structure slightly increased SW.

Description: This paper aims to construct conservation laws for a Benjamin–Bona–Mahony equation with variable coefficients, which is a third-order partial differential equation. This equation does not have a Lagrangian and so we transform it to a fourth-order partial differential equation, which has a Lagrangian. The Noether approach is then employed to construct the conservation laws. It so happens that the derived conserved quantities fail to satisfy the divergence criterion and so one needs to make adjustments to the derived conserved quantities in order to satisfy the divergence condition. The conservation laws are then expressed in the original variable. Finally, a conservation law is used to obtain exact solution of a special case of the Benjamin–Bona–Mahony equation.

Description: The sensorimotor system (SMS) plays an important role in sports and in every day movement. Several tools for assessment and training have been designed. Many of them are directed to specific populations, and have major shortcomings due to the training effect or safety. The aim of the present study was to design and assess a dynamic sensorimotor test and training device that can be adjusted for all levels of performance. The novel pneumatic-driven mechatronic device can guide the trainee, allow independent movements or disrupt the individual with unpredicted perturbations while standing on a platform. The test-reliability was evaluated using intraclass correlation coefficient (ICC). Subjects were required to balance their center of pressure (COP) in a target circle (TITC). The time in TITC and the COP error (COPe) were recorded for analysis. The results of 22 males and 14 females (23.7 ± 2.6 years) showed good to excellent test–retest reliability. The newly designed Active Balance System (ABS) was then compared with the Biodex Balance System SD® (BBS). The results of 15 females, 14 males (23.4 ± 1.6 years) showed modest correlation in static and acceptable correlation in dynamic conditions, suggesting that ABS could be a reliable and comparable tool for dynamic balance assessments.

Description: Climate change will increase the frequency and magnitude of extreme weather events and create risks that will impact health care facilities. Health care facilities will need to assess climate change risks and adopt adaptive management strategies to be resilient, but guidance tools are lacking. In this study, a toolkit was developed for health care facility officials to assess the resiliency of their facility to climate change impacts. A mixed methods approach was used to develop climate change resiliency indicators to inform the development of the toolkit. The toolkit consists of a checklist for officials who work in areas of emergency management, facilities management and health care services and supply chain management, a facilitator’s guide for administering the checklist, and a resource guidebook to inform adaptation. Six health care facilities representing three provinces in Canada piloted the checklist. Senior level officials with expertise in the aforementioned areas were invited to review the checklist, provide feedback during qualitative interviews and review the final toolkit at a stakeholder workshop. The toolkit helps health care facility officials identify gaps in climate change preparedness, direct allocation of adaptation resources and inform strategic planning to increase resiliency to climate change.

Description: The World Health Organization defines social determinants of health as “complex, integrated, and overlapping social structures and economic systems” that are responsible for most health inequities. Similar to the individual-level risk factors such as behavioral and biological risk factors that influence disease, we consider social determinants of health such as the distribution of income, wealth, influence and power as risk factors for risk of disease. We operationally define health inequity in a disease within a population due to a risk factor that is unfair and avoidable as the difference between the disease outcome with and without the risk factor in the population. We derive expressions for difference in health inequity between two populations due to a risk factor that is unfair and avoidable for a given disease. The difference in heath inequity between two population groups due to a risk factor increases with increasing difference in relative risks and the difference in prevalence of the risk factor in the two populations. The difference in health inequity could be larger than the difference in health outcomes between the two populations in some situations. Compared to health disparities which are typically measured and monitored using absolute or relative disparities of health outcomes, the methods presented in this manuscript provide a different, yet complementary, picture because they parse out the contributions of unfair and avoidable risk factors.

Description: Structured metal surfaces could support spoof surface plasmon polaritons (SPPs), the dispersion of which is determined by the cutoff condition of guided modes in the nanostructures. We show that we can achieve split spoof SPPs by breaking the degeneracy of guided helical modes in concentric nanostructures via the classic analogue of the Zeeman effect. This split effect is shown to be observable from the spectra of enhanced electromagnetic transmission. Spin-sensitive enhanced electromagnetic transmission and the associated characteristics of field are investigated. Transmission branches versus parallel wavevector can be satisfactorily fitted by using the dispersion of spoof SPPs.

Description: Light-induced degradation (LID) is a deleterious effect in crystalline silicon, which is considered to originate from recombination-active boron-oxygen complexes and/or copper-related defects. Although LID in both cases appears as a fast initial decay followed by a second slower degradation, we show that the time constant of copper-related degradation increases with increasing boron concentration in contrast to boron-oxygen LID. Temperature-dependent analysis reveals that the defect formation is limited by copper diffusion. Finally, interface defect density measurements confirm that copper-related LID is dominated by recombination in the wafer bulk.

Description: In this paper, we report the existence of intervalence charge transfer (IVCT) luminescence in Yb-doped fluorite-type crystals associated with Yb 2+ –Yb 3+ mixed valence pairs. By means of embedded cluster, wave function theory ab initio calculations, we show that the widely studied, very broad band, anomalous emission of Yb 2+ -doped CaF 2 and SrF 2 , usually associated with impurity-trapped excitons, is, rather, an IVCT luminescence associated with Yb 2+ –Yb 3+ mixed valence pairs. The IVCT luminescence is very efficiently excited by a two-photon upconversion mechanism where each photon provokes the same strong 4 f 14 –1 A 1g → 4 f 13 ( 2 F 7/2 )5 de g –1 T 1u absorption in the Yb 2+ part of the pair: the first one, from the pair ground state; the second one, from an excited state of the pair whose Yb 3+ moiety is in the higher 4 f 13 ( 2 F 5/2 ) multiplet. The Yb 2+ –Yb 3+ → Yb 3+ –Yb 2+ IVCT emission consists of an Yb 2+ 5 de g → Yb 3+ 4 f 7/2 charge transfer accompanied by a 4 f 7/2 → 4 f 5/2 deexcitation within the Yb 2+ 4 f 13 subshell: [ 2 F 5/2 5 de g , 2 F 7/2 ] → [ 2 F 7/2 ,4 f 14 ]. The IVCT vertical transition leaves the oxidized and reduced moieties of the pair after electron transfer very far from their equilibrium structures; this explains the unexpectedly large band width of the emission band and its low peak energy, because the large reorganization energies are subtracted from the normal emission. The IVCT energy diagrams resulting from the quantum mechanical calculations explain the different luminescent properties of Yb-doped CaF 2 , SrF 2 , BaF 2 , and SrCl 2 : the presence of IVCT luminescence in Yb-doped CaF 2 and SrF 2 ; its coexistence with regular 5 d -4 f emission in SrF 2 ; its absence in BaF 2 and SrCl 2 ; the quenching of all emissions in BaF 2 ; and the presence of additional 5 d –4 f emissions in SrCl 2 which are absent in SrF 2 . They also allow to interpret and reproduce recent experiments on transient photoluminescence enhancement in Yb 2+ -doped CaF 2 and SrF 2 , the appearance of Yb 2+ 4 f –5 d absorption bands in the excitation spectra of the IR Yb 3+ emission in partly reduced CaF 2 :Yb 3+ samples, and to identify the broadband observed in the excitation spectrum of the so far called anomalous emission of SrF 2 :Yb 2+ as an IVCT absorption, which corresponds to an Yb 2+ 4 f 5/2 → Yb 3+ 4 f 7/2 electron transfer.

Description: A classical limit of quantum dynamics can be defined by compensation of the quantum potential in the time-dependent Schrödinger equation. The quantum potential is a non-local quantity, defined in the trajectory-based form of the Schrödinger equation, due to Madelung, de Broglie, and Bohm, which formally generates the quantum-mechanical features in dynamics. Selective inclusion of the quantum potential for the degrees of freedom deemed “quantum,” defines a hybrid quantum/classical dynamics, appropriate for molecular systems comprised of light and heavy nuclei. The wavefunction is associated with all of the nuclei, and the Ehrenfest, or mean-field, averaging of the force acting on the classical degrees of freedom, typical of the mixed quantum/classical methods, is avoided. The hybrid approach is used to examine evolution of light/heavy systems in the harmonic and double-well potentials, using conventional grid-based and approximate quantum-trajectory time propagation. The approximate quantum force is defined on spatial domains, which removes unphysical coupling of the wavefunction fragments corresponding to distinct classical channels or configurations. The quantum potential, associated with the quantum particle, generates forces acting on both quantum and classical particles to describe the backreaction.

Description: In the present work, we redefine and generalize the action principle for dissipative systems proposed by Riewe by fixing the mathematical inconsistencies present in the original approach. In order to formulate a quadratic Lagrangian for non-conservative systems, the Lagrangian functions proposed depend on mixed integer order and fractional order derivatives. As examples, we formulate a quadratic Lagrangian for a particle under a frictional force proportional to the velocity and to the classical problem of an accelerated point charge.

Description: We consider a very natural generalization of quantum theory by letting the dimension of the Bloch ball be not necessarily three. We analyze bipartite state spaces where each of the components has a d -dimensional Euclidean ball as state space. In addition to this, we impose two very natural assumptions: the continuity and reversibility of dynamics and the possibility of characterizing bipartite states by local measurements. We classify all these bipartite state spaces and prove that, except for the quantum two-qubit state space, none of them contains entangled states. Equivalently, in any of these non-quantum theories, interacting dynamics is impossible. This result reveals that “existence of entanglement” is the requirement with minimal logical content which singles out quantum theory from our family of theories.

Description: A covariant algorithm for deriving the conserved quantities for natural Hamiltonian systems is combined with the non-relativistic framework of Eisenhart, and of Duval, in which the classical trajectories arise as geodesics in a higher dimensional space-time, realized by Brinkmann manifolds. Conserved quantities which are polynomial in the momenta can be built using time-dependent conformal Killing tensors with flux. The latter are associated with terms proportional to the Hamiltonian in the lower dimensional theory and with spectrum generating algebras for higher dimensional quantities of order 1 and 2 in the momenta. Illustrations of the general theory include the Runge-Lenz vector for planetary motion with a time-dependent gravitational constant G ( t ), motion in a time-dependent electromagnetic field of a certain form, quantum dots, the Hénon-Heiles and Holt systems, respectively, providing us with Killing tensors of rank that ranges from one to six.

Description: In this research, structural-functional integrated cement-based materials were prepared by employing cement paste and a microencapsulated phase change material (MPCM) manufactured using urea-formaldehyde resin as the shell and paraffin as the core material. The encapsulation ratio of the MPCM could reach up to 91.21 wt%. Thermal energy storage cement pastes (TESCPs) incorporated with different MPCM contents (5%, 10%, 15%, 20% and 25% by weight of cement) were developed, and their thermal and mechanical properties were studied. The results showed that the total energy storage capacity of the hardened cement specimens with MPCM increased by up to 3.9-times compared with that of the control cement paste. The thermal conductivity at different temperature levels (35–36 °C, 55–56 °C and 72–74 °C) decreased with the increase of MPCM content, and the decrease was the highest when the temperature level was 55–56 °C. Moreover, the compressive strength, flexural strength and density of hardened cement paste decreased with the increase in MPCM content linearly. Among the evaluated properties, the compressive strength of TESCPs had a larger and faster degradation with the increase of MPCM content.

Description: We demonstrate both theoretically and experimentally that the microwave-shielding effectiveness of a double-layer metallic mesh with a submillimeter period can be improved by increasing the separation between the two mesh layers (without affecting transmittance). This double-layer mesh consists of two layers of square aluminum mesh separated by a quartz-glass substrate. By increasing the substrate's optical thickness from zero to λ / 4   of the shielding band's upper frequency, the shielding of the double-layer mesh improves considerably, owing to the increased reflectivity of the double-layer mesh with increasing separation in the low-frequency band. A Ku-band shielding effectiveness of over 32 dB is observed for the double-layer mesh with a normalized visible transmittance greater than 91%. It is found that the electromagnetic shielding effectiveness is enhanced by over 7 dB (80.0% energy attenuation) across the Ku-band, compared with that of a single-layer mesh, while the optical transmittances are almost identical for both tested structures. Such an enhancement permits the design of high-transparency optical elements with stronger microwave shielding that can be achieved using single-layer metallic mesh.

Description: This letter performed polarized microscopic laser Raman scattering spectroscopy on the curved edges of transferred epitaxial graphene on SiO 2 /Si. The intensity ratio between the parallel and perpendicular polarized D band is evolved, providing a spectroscopy-based technique to probe the atomic-scale edge structures in graphene. A detailed analysis procedure for non-ideal disordered curved edges of graphene is developed combining the atomic-scale zigzag and armchair edge structures along with some point defects. These results could provide valuable information of the realistic edges of graphene at the atomic-scale that can strongly influence the performance of graphene-based nanodevices.

Description: In this paper, we explore the effects of electrostatic parametric amplification on a high quality factor (Q 〉 100 000) encapsulated disk resonator gyroscope (DRG), fabricated in 〈100〉 silicon. The DRG was operated in the n = 2 degenerate wineglass mode at 235 kHz, and electrostatically tuned so that the frequency split between the two degenerate modes was less than 100 mHz. A parametric pump at twice the resonant frequency is applied to the sense axis of the DRG, resulting in a maximum scale factor of 156.6  μ V/(°/s), an 8.8× improvement over the non-amplified performance. When operated with a parametric gain of 5.4, a minimum angle random walk of 0.034°/√h and bias instability of 1.15°/h are achieved, representing an improvement by a factor of 4.3× and 1.5×, respectively.

Description: We propose a control element for a Josephson spin valve. It is a complex Josephson device containing ferromagnetic (F) layer in the weak-link area consisting of two regions, representing 0 and π Josephson junctions, respectively. The valve's state is defined by mutual orientations of the F-layer magnetization vector and boundary line between 0 and π sections of the device. We consider possible implementation of the control element by introduction of a thin normal metal layer in a part of the device area. By means of theoretical simulations, we study properties of the valve's structure as well as its operation, revealing such advantages as simplicity of control, high characteristic frequency, and good legibility of the basic states.

Description: Thin films of the lead-free ferroelectric Na 0.5 Bi 0.5 TiO 3 grown on thin-film Pt electrodes supported by SrTiO 3 substrates have a complex microstructure consisting of crystalline grains with three distinct major crystallographic orientations. The piezoelectric response measured in spatially separated sub-micron grains using time-resolved synchrotron x-ray microdiffraction is highly inhomogeneous even among grains sharing the same major orientation. The piezoelectric coefficient d 33 varies by nearly a factor of two in a series of areas sharing the 〈001〉 orientation. The piezoelectric inhomogeneity is linked to the peculiar microstructure of the film, arising from local variations in the stress imposed by surrounding grains with different crystallographic orientations and differing directions of the ferroelectric remnant polarization. A systematic nonlinearity of the piezoelectric strain is observed in applied electric fields with small magnitudes in all regions, consistent with the coexistence of domains of differing polarization direction at zero applied electric field.

Description: Land surface temperature (LST) retrieval is a key issue in infrared quantitative remote sensing. In this paper, a split window algorithm is proposed to estimate LST with daytime data in two mid-infrared channels (channel 66 (3.746~4.084 μm) and channel 68 (4.418~4.785 μm)) from Airborne Hyperspectral Scanner (AHS). The estimation is conducted after eliminating reflected direct solar radiance with the aid of water vapor content (WVC), the view zenith angle (VZA), and the solar zenith angle (SZA). The results demonstrate that the LST can be well estimated with a root mean square error (RMSE) less than 1.0 K. Furthermore, an error analysis for the proposed method is also performed in terms of the uncertainty of LSE and WVC, as well as the Noise Equivalent Difference Temperature (NEΔT). The results show that the LST errors caused by a LSE uncertainty of 0.01, a NEΔT of 0.33 K, and a WVC uncertainty of 10% are 0.4~2.8 K, 0.6 K, and 0.2 K, respectively. Finally, the proposed method is applied to the AHS data of 4 July 2008. The results show that the differences between the estimated and the ground measured LST for water, bare soil and vegetation areas are approximately 0.7 K, 0.9 K and 2.3K, respectively.

Description: Enhanced geothermal systems (EGS) extract heat from underground hot dry rock (HDR) by first fracturing the HDR and then circulating a geofluid (typically water) into it and bringing the heated geofluid to a power plant to generate electricity. This study focuses on analysis, examination, and comparison of leading geothermal power plant configurations with a geofluid temperature from 200 to 800 °C, and also analyzes the embodied energy of EGS surface power plants. The power generation analysis is focused on flash type cycles for using subcritical geofluid (〈374 °C) and expansion type cycles for using supercritical geofluid (>374 °C). Key findings of this study include: (i) double-flash plants have 24.3%–29.0% higher geofluid effectiveness than single-flash ones, and 3%–10% lower specific embodied energy; (ii) the expansion type plants have geofluid effectiveness > 750 kJ/kg, significantly higher than flash type plants (geofluid effectiveness 〈 300 kJ/kg) and the specific embodied energy is lower; (iii) to increase the turbine outlet vapor fraction from 0.75 to 0.90, we include superheating by geofluid but that reduces the geofluid effectiveness by 28.3%; (iv) for geofluid temperatures above 650 °C, double-expansion plants have a 2% higher geofluid effectiveness and 5%–8% lower specific embodied energy than single-expansion ones.

Description: A new method of depositing tin dioxide nanofibers in order to develop chemical sensors is presented. It involves an electrospinning process with in-plane electrostatic focusing over micromechanized substrates. It is a fast and reproducible method. After an annealing process, which can be performed by the substrate heaters, it is observed that the fibers are intertwined forming porous networks that are randomly distributed on the substrate. The fiber diameters oscillate from 100 nm to 200 nm and fiber lengths reach several tens of microns. Each fiber has a polycrystalline structure with multiple nano-grains. The sensors have been tested for the detection of acetone and hydrogen peroxide (precursors of the explosive triacetone triperoxide, TATP) in air in the ppm range. High and fast responses to these gases have been obtained.

Description: Publication date: March 2015 Source: GeoResJ, Volume 5 Author(s): A. Poortinga , J.G.S. Keijsers , S.M. Visser , M.J.P.M. Riksen , A.C.W. Baas Coastal dunes are the primary defence protecting the coastline from the destructive forces of the sea in The Netherlands. Aeolian processes are important in this context as they contribute to dune accretion and thus the safety of the coastal hinterland. In this study, we analyze horizontal and vertical variability of event scale aeolian sand transport on a wide beach on the island of Ameland, The Netherlands. Data were obtained from a meteorological station, groundwater monitoring wells and a camera installed on the beach. Fifteen aeolian transport events (two involving onshore winds, seven longshore and six offshore) were measured using a comprehensive grid of 37 customized MWAC traps. The highest sand transport rates and largest variability was found for alongshore events. Surface moisture, governed by groundwater, was found to be an important controlling parameter for aeolian transport rates and vertical flux profiles. Groundwater levels were largely dominated by beach inundation, influencing the groundwater table for a two week period. Variations in vertical flux profiles between traps were larger for wet sand transport events than dry ones. In general, sand transport rates were highest at the foreshore and lowest at the dune toe. Sand transport dynamics are dependent on local conditions such as beach dimensions, beach orientation and also meteorological and surface characteristics. Moderate (high frequency, low magnitude) events are also capable of transporting large amounts of sand. Future studies should include spatially explicit measurements of elevation and surface moisture to obtain a more complete understanding of the complex sand transport dynamics.

Description: Publication date: September–December 2014 Source: GeoResJ, Volumes 3–4 Author(s): A. Määttänen , M. Douspis Recent datasets on heterogeneous deposition mode ice nucleation have revealed a strong dependence of the contact parameter m on temperature, ranging from linear to exponential, depending on the experiments. We analyze recent datasets using a Monte Carlo Markov Chain method with the full classical nucleation theory including spherical and planar geometry. The method we use allows us to test models of the temperature dependence of the contact parameter and evaluate their performance. We estimate the applicability of different forms of contact parameter temperature dependence, including a new well-behaved suggestion. Such a function has a more physical behavior at high and low temperatures and might thus be more easily applicable in atmospheric modeling. However, because of their limited temperature range, the present datasets are unable to reveal the behavior of the contact parameter in low temperatures, and we are unable to fully validate the proposed function. We thus call for more heterogeneous nucleation experiments reaching low temperatures (〈170 K). Such datasets may be significant for studies on, for example, polar mesospheric clouds, Mars ice clouds, and perhaps exoplanet clouds. This work provides a new framework, valid even for very small ice nucleus sizes, for analyzing heterogeneous nucleation datasets.

Description: The effects of aflatoxin B1 (AFB1) exposure and sodium selenite supplementation on cell apoptosis of jejunum in broilers were studied. A total of 240 one-day-old male AA broilers were randomly assigned four dietary treatments containing 0 mg/kg of AFB1 (control), 0.3 mg/kg AFB1 (AFB1), 0.4 mg/kg supplement Se (+ Se) and 0.3 mg/kg AFB1 + 0.4 mg/kg supplement Se (AFB1 + Se), respectively. Compared with the control broilers, the number of apoptotic cells, the expression of Bax and Caspase-3 mRNA were significantly increased, while the expression of Bcl-2 mRNA and the Bcl-2/Bax ratio were significantly decreased in AFB1 broilers. The number of apoptotic cells and the expression of Caspase-3 mRNA in AFB1 + Se broilers were significantly higher than those in the control broilers, but significantly lower than those in AFB1 broilers. There were no significant changes in the expression of Bax mRNA between AFB1 + Se and control broilers; the expression of Bcl-2 mRNA and the Bcl-2/Bax ratio in AFB1 + Se broilers were significantly lower than those in the control broilers, but significantly higher than those in AFB1 broilers. In conclusion, 0.3 mg/kg AFB1 in the diet can increase cell apoptosis, decrease Bcl-2 mRNA expression, and increase of Bax and Caspase-3 mRNA expression in broiler’s jejunum. However, supplementation of dietary sodium selenite at the concentration of 0.4 mg/kg Se may ameliorate AFB1-induced apoptosis by increasing Bcl-2 mRNA expression, and decreasing Bax and Caspase-3 mRNA expression.

Description: In a recent article, Serov et al. [J. Appl. Phys. 116 , 034507 (2014)] claim: “This study represents the first time that the high-field behavior in graphene on a substrate was investigated taking into account intrinsic graphene properties,” ignoring the most recent anisotropic distribution function [V. K. Arora et al ., J. Appl. Phys. 112 , 114330 (2012)] also published in J. Appl. Phys., targeting the same experimental data [V. E. Dorgan et al. , Appl. Phys. Lett. 97 , 082112 (2010)]. The claim of Serov et al. of being first is refuted and many shortcomings of the hydrodynamic model for a highly quantum and degenerate graphene nanolayer are pointed out.

Description: Fe thin films were deposited on sodium chloride (NaCl) substrates using magnetron sputtering to investigate means of texture control in free standing metal films. The Fe thin films were studied using transmission electron microscopy equipped with automated crystallographic orientation microscopy. Using this technique, the microstructure of each film was characterized in order to elucidate the effects of altering deposition parameters. The natural tendency for Fe films grown on (100) NaCl is to form a randomly oriented nanocrystalline microstructure. By careful selection of substrate and deposition conditions, it is possible to drive the texture of the film toward a single (100) orientation while retaining the nanocrystalline microstructure.

Description: The current paper reports successful syntheses of Ni–TiN composite coatings by pulse electrodeposition. The effect of pulse frequency on the microstructures, nanomechanical, and wear properties of the coatings was investigated using transmission electron microscopy, X–ray diffraction, nanoindenter, scanning electron microscopy, and wear test instrument. The results showed that the Ni–TiN composite coating prepared at the pulse frequency of 100 Hz showed the presence of a less number of TiN particles and some degrees of aggregation in micro-regions. By contrast, in the Ni–TiN coating deposited at the pulse frequency of 500 Hz, the TiN particles were large in number and dispersed homogeneously, thereby, offering the coating a uniform and fine structure. The average grain diameters of Ni and TiN in the coating prepared at 100 Hz were 154.7 and 44.8 nm, respectively, whereas those for the coating prepared at 500 Hz were 67.3 and 25.9 nm, respectively. The maximum TiN content in the Ni-TiN coating deposited at 800 Hz was approximately 10.5 wt. %. The maximum microhardness and the Young's modulus values for the Ni–TiN composite coatings deposited at 800 Hz were 35.7 GPa and 167.4 GPa, respectively. Furthermore, the Ni–TiN composite coating prepared at 100 Hz had more severe damages, whereas the morphologies of worn surface of the coatings deposited at 500 Hz and 800 Hz were smooth and only a few small pits appeared on the surface.

Description: Excited states and the ground state of the diatomic molecule RbSr were calculated by post Hartree-Fock molecular orbital theory up to 22 000 cm −1 . We applied a multireference configuration interaction calculation based on multiconfigurational self-consistent field wave functions. Both methods made use of effective core potentials and core polarization potentials. Potential energy curves, transition dipole moments, and permanent electric dipole moments were determined for RbSr and could be compared with other recent calculations. We found a good agreement with experimental spectra, which have been obtained recently by helium nanodroplet isolation spectroscopy. For the lowest two asymptotes (Rb (5 s 2 S) + Sr (5 s 4 d 3 P°) and Rb (5 p 2 P°) + Sr (5 s 2 1 S)), which exhibit a significant spin-orbit coupling, we included relativistic effects by two approaches, one applying the Breit-Pauli Hamiltonian to the multireference configuration interaction wave functions, the other combining a spin-orbit Hamiltonian and multireference configuration interaction potential energy curves. Using the results for the relativistic potential energy curves that correspond to the Rb (5 s 2 S) + Sr (5 s 4 d 3 P°) asymptote, we have simulated dispersed fluorescence spectra as they were recently measured in our lab. The comparison with experimental data allows to benchmark both methods and demonstrate that spin-orbit coupling has to be included for the lowest states of RbSr.

Description: Ozonolysis of alkenes, a principle non-photolytic source of atmospheric OH radicals, proceeds through unimolecular decay of energized carbonyl oxide intermediates, known as Criegee intermediates. In this work, cold dimethyl-substituted Criegee intermediates are vibrationally activated in the CH stretch overtone region to drive the 1,4 hydrogen transfer reaction that leads to OH radical products. IR excitation of (CH 3 ) 2 COO reveals the vibrational states with sufficient oscillator strength, coupling to the reaction coordinate, and energy to surmount the effective barrier (≤ 16.0 kcal mol −1 ) to reaction. Insight on the dissociation dynamics is gleaned from homogeneous broadening of the spectral features, indicative of rapid intramolecular vibrational energy redistribution and/or reaction, as well as the quantum state distribution of the OH X 2 Π (v = 0) products. The experimental results are compared with complementary electronic structure calculations, which provide the IR absorption spectrum and geometric changes along the intrinsic reaction coordinate. Additional theoretical analysis reveals the vibrational modes and couplings that permit (CH 3 ) 2 COO to access to the transition state region for reaction. The experimental and theoretical results are compared with an analogous recent study of the IR activation of syn -CH 3 CHOO and its unimolecular decay to OH products [F. Liu, J. M. Beames, A. S. Petit, A. B. McCoy, and M. I. Lester, Science345, 1596 (2014)].

Description: In the present work, the structural and dynamic properties of liquid and undercooled boron are investigated by means of ab initio molecular dynamics simulation. Our results show that both liquid and undercooled states present a well pronounced short-range order (SRO) mainly due to the formation of inverted umbrella structural units. Moreover, we observe the development of a medium-range order (MRO) in the undercooling regime related to the increase of inverted umbrella structural units and of their interconnection as the temperature decreases. We also evidence that this MRO leads to a partial crystallization in the β-rhombohedral crystal below T = 1900 K. Finally, we discuss the role played by the SRO and MRO in the nearly Arrhenius evolution of the diffusion and the non-Arrhenius temperature dependence of the shear viscosity, in agreement with the experiment.

Description: The properties of dipolar cubic lattices are studied and the paradox of how to obtain a long range polarization in such lattices is resolved by choosing a proper shape of the total system. It has been shown that large but finite number of aligned dipoles prefer to exist as needle shaped macroscopic particles [M. Yoon and D. Tománek, J. Phys.: Condens. Matter22, 455105 (2010)]. The total energy for a particle in such a system has one short range contribution depending on the packing (the chosen lattice) and one long range term depending on the dipole density of the system. We show that the latter term corresponds exactly to the polarization term from a dielectric medium embedding a sphere of the considered system. There is no need to include a dielectric medium in this modeling and the “dielectric stabilization” is generated solely by the dipoles of the system.

Description: A practical hyperdynamics method is proposed to accelerate systems with highly endothermic and exothermic reactions such as hydrocarbon pyrolysis and oxidation reactions. In this method, referred to as the “adaptive hyperdynamics (AHD) method,” the bias potential parameters are adaptively updated according to the change in potential energy. The approach is intensively examined for JP-10 (exo-tetrahydrodicyclopentadiene) pyrolysis simulations using the ReaxFF reactive force field. Valid boost parameter ranges are clarified as a result. It is shown that AHD can be used to model pyrolysis at temperatures as low as 1000 K while achieving a boost factor of around 10 5 .

Description: E -crotonic acid was isolated in cryogenic solid N 2 and xenon matrices, and subjected to Laser ultraviolet (UV) and near-infrared (NIR) irradiations. In the deposited matrices, the two low-energy cis C–O E -cc and E -ct conformers, which are the only forms significantly populated in the gas phase, were observed. UV irradiation (λ= 250 nm) of the compound in N 2 matrix allows for experimental detection, not just of the two low-energy cis C–O isomers of Z -crotonic acid previously observed in the experiments carried out in argon matrix [ Z -cc and Z -ct; R. Fausto, A. Kulbida, and O. Schrems, J. Chem. Soc., Faraday Trans.91, 3755–3770 (1995)] but also of the never observed before high-energy forms of both E - and Z -crotonic acids bearing the carboxylic acid group in the trans arrangement ( E -tc and Z -tc conformers). In turn, NIR irradiation experiments in the N 2 matrix allow to produce the high-energy E -tc trans C–O conformer in a selective way, from the initially deposited E -cc form. The vibrational signatures of all the 6 rotameric structures of the crotonic acids experimentally observed, including those of the new trans C–O forms, were determined and the individual spectra fully assigned, also with support of theoretically obtained data. On the other hand, as found before for the compound isolated in argon matrix, the experiments performed in xenon matrix failed to experimental detection of the trans C–O forms. This demonstrates that in noble gas matrices these forms are not stable long enough to allow for their observation by steady state spectroscopy techniques. In these matrices, the trans C–O forms convert spontaneously into their cis C–O counterparts, by tunnelling. Some mechanistic details of the studied processes were extracted and discussed.

Description: We describe a novel approach for the calculation of local electric dipole moments for periodic systems. Since the position operator is ill-defined in periodic systems, maximally localized Wannier functions based on the Berry-phase approach are usually employed for the evaluation of local contributions to the total electric dipole moment of the system. We propose an alternative approach: within a subsystem-density functional theory based embedding scheme, subset electric dipole moments are derived without any additional localization procedure, both for hybrid and non-hybrid exchange–correlation functionals. This opens the way to a computationally efficient evaluation of local electric dipole moments in (molecular) periodic systems as well as their rigorous splitting into atomic electric dipole moments. As examples, Infrared spectra of liquid ethylene carbonate and dimethyl carbonate are presented, which are commonly employed as solvents in Lithium ion batteries.

Description: In this study, an electroactive polymer (EAP), poly(2,5-bis(N-methyl-N-hexylamino)phenylene vinylene) (BAM-PPV) was investigated as a potential alternative surface pretreatment for hexavalent chromium (Cr(VI))-based aerospace coatings. BAM-PPV was tested as a pretreatment coating on an aerospace aluminum alloy (AA2024-T3) substrate in combination with a non-Cr(VI) epoxy primer and a polyurethane Advanced Performance Coating (APC) topcoat. This testing was undertaken to determine BAM-PPV’s adhesion, corrosion-inhibition, compatibility and survivability in laboratory testing and during outdoor field-testing. BAM-PPV showed excellent adhesion and acceptable corrosion performance in laboratory testing. The BAM-PPV aerospace coating system (BAM-PPV, non-Cr(VI) epoxy primer and polyurethane APC topcoat) was field tested for one year on the rear hatch door of the United States Air Force C-5 cargo plane. After one year of field testing there was no evidence of delamination or corrosion of the BAM-PPV aerospace coating system.

Description: The effect of chemical treatment of hemp hurds slices in three solutions (EDTA (Ethylenediaminetetraacetic acid), NaOH and Ca(OH)2) on the properties of natural material was discussed in this paper. Changes in the morphology, chemical composition and structure as well as thermal stability of hemp hurds before and after their modification were investigated by using FTIR (Fourier transform infrared spectroscopy), XRD (X-ray powder diffraction analysis) and TG (thermogravimetry)/DSC (differential scanning calorimetry). Size exclusion chromatography (SEC) measurements were used for determination of degree of cellulose polymerization of hemp hurd samples. Chemical modification is related to the partial removal of non-cellulosic components of lignin, hemicellulose and pectin as well as waxes from the surface of hemp hurd slices. Another effect of the chemical treatment applied is connected with increasing the crystallinity index of cellulose determined by FTIR and XRD methods. Decrease in degree of cellulose polymerization and polydispersity index in chemically modified hemp hurds compared to the original sample was observed. Increase in thermal stability of treated hemp hurd was found. The most significant changes were observed in alkaline treated hemp hurds by NaOH.

Description: The collision-less transfer of momentum and energy from explosive debris plasma to magnetized background plasma is a salient feature of various astrophysical and space environments. While much theoretical and computational work has investigated collision-less coupling mechanisms and relevant parameters, an experimental validation of the results demands the measurement of the complex, collective electric fields associated with debris-background plasma interaction. Emission spectroscopy offers a non-interfering diagnostic of electric fields via the Stark effect. A unique experiment at the University of California, Los Angeles, that combines the Large Plasma Device (LAPD) and the Phoenix laser facility has investigated the marginally super-Alfvénic, quasi-perpendicular expansion of a laser-produced carbon (C) debris plasma through a preformed, magnetized helium (He) background plasma via emission spectroscopy. Spectral profiles of the He II 468.6 nm line measured at the maximum extent of the diamagnetic cavity are observed to intensify, broaden, and develop equally spaced modulations in response to the explosive C debris, indicative of an energetic electron population and strong oscillatory electric fields. The profiles are analyzed via time-dependent Stark effect models corresponding to single-mode and multi-mode monochromatic (single frequency) electric fields, yielding temporally resolved magnitudes and frequencies. The proximity of the measured frequencies to the expected electron plasma frequency suggests the development of the electron beam-plasma instability, and a simple saturation model demonstrates that the measured magnitudes are feasible provided that a sufficiently fast electron population is generated during C debris–He background interaction. Potential sources of the fast electrons, which likely correspond to collision-less coupling mechanisms, are briefly considered.

Description: It is shown that co-linear injection of electrons or positrons into the wakefield of the self-modulating particle beam is possible and ensures high energy gain. The witness beam must co-propagate with the tail part of the driver, since the plasma wave phase velocity there can exceed the light velocity, which is necessary for efficient acceleration. If the witness beam is many wakefield periods long, then the trapped charge is limited by beam loading effects. The initial trapping is better for positrons, but at the acceleration stage a considerable fraction of positrons is lost from the wave. For efficient trapping of electrons, the plasma boundary must be sharp, with the density transition region shorter than several centimeters. Positrons are not susceptible to the initial plasma density gradient.