ALBERT

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Nohora Caicedo, Renaud Leturcq, Jean-Pierre Raskin, Denis Flandre, Damien Lenoble〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Metal-oxide nanowires are showing a great interest in the domain of gas sensing due to their large response even at a low temperature, enabling low-power gas sensors. However their response is still not fully understood, and mainly restricted to the linear response regime, which limits the design of appropriate sensors for specific applications. Here we analyse the non-linear response of a sensor based on ZnO nanowires network, both as a function of the device geometry and as a response to oxygen exposure. Using an appropriate model, we disentangle the contribution of the nanowire resistance and of the junctions between nanowires in the network. The applied model shows a very good consistency with the experimental data, allowing us to demonstrate that the response to oxygen at room temperature is dominated by the barrier potential at low bias voltage, and that the nanowire resistance starts to play a role at higher bias voltage. This analysis allows us to find the appropriate device geometry and working point in order to optimize the sensitivity. Such analysis is important for providing design rules, not only for sensing devices, but also for applications in electronics and opto-electronics using nanostructures networks with different materials and geometries.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Gang Xu, Chen Cheng, Wei Yuan, Zhaoyang Liu, Lihang Zhu, Xintong Li, Yanli Lu, Zetao Chen, Jinglong Liu, Zheng Cui, Jingjing Liu, Hong Men, Qingjun Liu〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Last decade has seen a growing trend toward smartphone-based biochemical sensing systems. Meanwhile, flexible electrochemical sensing devices like wristbands, patches, and tattoos have been widely developed for 〈em〉in situ〈/em〉 detections of analytes in accessible biofluids. For these devices, the connectivity with smartphone and the flexibility of the whole device are hard to achieve at the same time, due to the need for rigid batteries or wired connections. Here, a smartphone-based battery-free and flexible electrochemical patch is developed for real-time calcium and chloride ions detections in various biofluids. The patch is integrated with near field communication (NFC) module, on-site signal processing circuitry, and an all-printed stretchable electrode array which can maintain stable conductivity during stretching, without the need for serpentine designs. The device enables wireless power harvesting, on-site signal processing, and wireless data transmission capabilities. NFC-enabled smartphones can wirelessly power the patch and get the detection results through inductive coupling between antennas. The calcium and chloride sensors showed good sensitivity, repeatability, selectivity, and stability in quantitative detections of target ions. 〈em〉Ex situ〈/em〉 measurements in serum, urine, tear, and sweat demonstrated good consistency with specialized instrument. Real-time on-body sweat analysis with the patch was also performed, which further indicated the usability and stability of the device in wearable applications. This platform provides a battery-free, wireless, and flexible solution for smartphone-based electrochemical sensing systems, which can be applied to rapid analysis of various biofluids.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S092540051930944X-ga1.jpg" width="354" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Shuangming Wang, Jing Cao, Wen Cui, Longlong Fan, Xifei Li, Dejun Li, Tong Zhang〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉One dimensional porous Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 rectangular microrods (MR) are designed and successfully prepared by a distinctive electrospun precursor-hydrothermal regulation-annealing treatment strategy while Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 nanofibers (NF) are also synthesized for comparison by directly calcining precursors without hydrothermal treatment. The hydrothermal treatment before annealing process results in morphology and structure transition of Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 products from compact solid nanofibers to porous rods. When applied as a gas sensing material, Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 porous rods based sensors exhibit enhanced gas sensing properties in terms of rapid response time (3 s), recovery time (5 s), good selectivity and stability towards 100 ppm acetone gas at a relatively low working temperature of 200 °C. Meanwhile, the response of Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 porous rods toward 100 ppm acetone reaches approximately 5 times higher than that of solid Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 nanofibers. The enhanced acetone gas sensing properties of Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 rectangular porous rods are believed to originate from its porous structure and large surface area, facilitating gas adsorption and surface reaction and causing significant change in the thickness of holes accumulation layer (HAL). Feasible morphology-adjusting strategy and enhanced acetone gas sensing performances further highlight the advantage of as-prepared Co〈sub〉3〈/sub〉O〈sub〉4〈/sub〉 porous rods in future acetone real-time monitoring.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Xiuyu Wang, Heng Li, Xuantong Zhu, Mengzhen Xia, Tao Tao, Binxin Leng, Wen Xu〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉A kind of ZnSn(OH)〈sub〉6〈/sub〉 crystalline precursor composed of micro- and nano-sized particles with two different morphologies was synthesized by co-precipitation method with the presence of triethanolamine (TEOA) as functional reagent. Zn〈sub〉1-〈/sub〉〈em〉〈sub〉x〈/sub〉〈/em〉Mg〈em〉〈sub〉x〈/sub〉〈/em〉Sn(OH)〈sub〉6〈/sub〉 samples (0≤〈em〉x〈/em〉≤0.5) were prepared by doping Mg〈sup〉2+〈/sup〉 ions in the synthesis process of ZnSn(OH)〈sub〉6〈/sub〉 precursor. Experimental results reveal that both the morphology and size of ZnSn(OH)〈sub〉6〈/sub〉 particles can be changed by TEOA and Mg〈sup〉2+〈/sup〉 ions, but not changed by dehydration at high temperature with the formation of Zn〈sub〉1-〈/sub〉〈em〉〈sub〉x〈/sub〉〈/em〉Mg〈em〉〈sub〉x〈/sub〉〈/em〉SnO〈sub〉3〈/sub〉 samples. When 〈em〉x〈/em〉 is 0.1, the effect of Mg〈sup〉2+〈/sup〉 ions on the morphology and size of ZnSn(OH)〈sub〉6〈/sub〉 particles is not remarkable, but the ethanol sensitivity of the resulting ZnSnO〈sub〉3〈/sub〉 sample at a low temperature of 80 °C is significantly improved by Mg〈sup〉2+〈/sup〉 ions at the conditions of nano-TiO〈sub〉2〈/sub〉 decoration and UV radiation. The ethanol response of the composite sample (ZM〈sub〉0.1〈/sub〉SO–T〈sub〉10〈/sub〉) is as high as ca. 149 at 500 ppm concentration, and its corresponding response and recovery time is about 4 s and 80 s, respectively. Furthermore, the sensor with ZM〈sub〉0.1〈/sub〉SO–T〈sub〉10〈/sub〉 also shows a good selectivity and long-term stability. Possible reasons for the superior ethanol sensitivity at low temperature were discussed.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉 〈p〉*Here ZnSnO〈sub〉3〈/sub〉 without Mg doping and Zn〈sub〉0.9〈/sub〉Mg〈sub〉0.1〈/sub〉SnO〈sub〉3〈/sub〉 with10% TiO〈sub〉2〈/sub〉 decoration samples prepared by this study are denoted as ZM〈sub〉0〈/sub〉SO and ZM0.1SO, respectively.〈/p〉 〈p〉In this study ZnSn(OH)〈sub〉6〈/sub〉 crystalline precursor composed of micro- and nano-sized particles with two different morphologies in (a) was synthesized by the control of the amount of triethanolamine (TEOA) as functional additive based on co-precipitation method. The −OH groups in TEOA can make ZnSn(OH)〈sub〉6〈/sub〉 cubic crystal nuclei adsorbed and connected together, resulting in the formation of a micro-sized cluster with cubic corners exposed (a). Usually, the cubic corners are corroded in the etching process [46], but those cubic corners of the micro-sized clusters in (a) are not corroded when nano-sized particles exist with them. However, Mg〈sup〉2+〈/sup〉 ions used for substitute for Zn〈sup〉2+〈/sup〉 ions by doping can counteract the role of TEOA in the synthesis of ZnSn(OH)〈sub〉6〈/sub〉 precursor. The cubic corners of the micro-sized clusters in (a) begin to be corroded when ZnSn(OH)〈sub〉6〈/sub〉 precursor is synthesized with the presence of a small number of Mg2+ ions (b), and no micro-sized clusters are formed if there are more Mg2+ ions in the synthesizing process. After dehydration of Zn〈sub〉1-〈/sub〉〈em〉〈sub〉x〈/sub〉〈/em〉Mg〈em〉〈sub〉x〈/sub〉〈/em〉Sn(OH)〈sub〉6〈/sub〉 precursor at high temperature, Zn〈sub〉1-〈/sub〉〈em〉〈sub〉x〈/sub〉〈/em〉Mg〈em〉〈sub〉x〈/sub〉〈/em〉SnO〈sub〉3〈/sub〉 was formed.〈/p〉 〈p〉Gas-sensing test reveals the following results: (1) The ZnSnO〈sub〉3〈/sub〉 (ZM〈sub〉0〈/sub〉SO) and Zn〈sub〉0.9〈/sub〉Mg〈sub〉0.1〈/sub〉SnO3 (ZM〈sub〉0.1〈/sub〉SO) samples, originating from the dehydration of samples in (a) and (b), respectively, have a high response to ethanol at a high temperature of 220 °C. The gas-sensing activity of ZnSnO〈sub〉3〈/sub〉 is greatly enhanced by Mg〈sup〉2+〈/sup〉 doping, as can be inferred from the gas response value of the two samples. (2) When nano-TiO〈sub〉2〈/sub〉 was used to decorate ZM〈sub〉0.1〈/sub〉SO, the resulting sensor under UV irradiation has a low operating temperature at a maximum gas response of 149, which is far more than that of our previous study [46].〈/p〉 〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519309463-ga1.jpg" width="126" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉 〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Peng Lei, Ying Zhou, Ruiqi Zhu, Yang Liu, Chuan Dong, Shaomin Shuang〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Iron phthalocyanine (FePc) functionalized nitrogen, boron–doped reduced graphene oxide (N,B–rGO) nanocomposite (FePc/N,B–rGO) was facilely fabricated for the first time as a electrochemical platform for sensitive detection of glutathione (GSH). FePc was immobilized on N,B–rGO substrate through π–π interaction, and N,B–rGO provided FePc with a large specific surface area to improve electron transfer and maintain its electrocatalytic activity. Cyclic voltammetric measurements showed that FePc and N,B–rGO triggered the synergistic effect and exhibited a satisfactory electrocatalytic activity. By integration of FePc and N,B–rGO, the FePc/N,B–rGO/GCE sensor displayed a wide linear dynamic range from 5.0 × 10〈sup〉–8〈/sup〉 M to 1.6 × 10〈sup〉–3〈/sup〉 M with a low detection limit of 7.1 × 10〈sup〉–9〈/sup〉 M. Besides, the electrochemical sensor presented satisfiable reproducibility, excellent anti–interference performance and long–term stability. The method was further expanded to determinate GSH in human serum sample with the recoveries between 95.0–109.0%.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519309578-ga1.jpg" width="378" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Bradley Ledden, Joe Bruton〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉We developed a ring electrode sensor for down-stream electrochemical sensing of microfluidic ELISA assay. The sensor is designed to easily integrate into the flow environment. Noble metal inks on Low Temperature Co-fired Ceramic provide straight forward fabrication at the mesoscale yielding robust sensors with very low sensing volumes. Two different sensor geometries were modeled. The best design was fabricated and tested in both static and flowing solutions. The sensor exhibits both macroelectrode and microelectrode behavior depending on fluid flow rate. Sensors of this type may be ideal for applications where electrochemical detection is desired in a flowing solution since the ring electrode has low propensity for bubble trapping.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Nada F. Atta, Ahmed Galal, Yousef M. Ahmed, Ekram H. El-Ads〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Cardiovascular disease is a class of diseases that involves the heart or blood vessels. It includes coronary artery diseases such as angina and myocardial infarction. In addition, hypertension is quantitatively the most important risk factor for premature cardiovascular disease. Dobutamine (DB) and amlodipine (AM) are medications commonly used for treating these diseases. Therefore, simultaneous determination of these drugs in presence of interfering compounds in biological fluids; paracetamol (PA), and ascorbic acid (AA) is essential for patients under medical treatment by these drugs. An innovative strategy is introduced for fabrication of a novel layered composite based on layer-by-layer modification of a glassy carbon electrode surface (GC) with multi-walled carbon nanotubes (CNT), ionic liquid crystal (ILC), graphene (RGO) and 18-Crown-6 (CW); (GC/CNT/ILC/RGO/CW). The layered sensor exhibited excellent electro-catalytic activity for determination of AA in the drugs mixture and simultaneous determination of DB, PA, and AM in human serum in linear dynamic ranges; 0.4 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si2.gif" overflow="scroll"〉〈mo〉→〈/mo〉〈/math〉 40 μM, 0.02 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si2.gif" overflow="scroll"〉〈mo〉→〈/mo〉〈/math〉 40 μM, 0.001 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si2.gif" overflow="scroll"〉〈mo〉→〈/mo〉〈/math〉 20 μM and 0.008 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si1.gif" overflow="scroll"〉〈mtext〉 〈/mtext〉〈mo〉→〈/mo〉〈/math〉 30 μM with low detection limit values; 9.24 nM, 0.497 nM, 0.0906 nM and 0.139 nM, respectively and low quantification limit values; 30.8 nM, 1.66 nM, 0.302 nM and 0.463 nM, respectively. Further practical application was performed for quantitative analysis of AA, DB, PA and AM in their pharmaceutical formulations.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519308482-ga1.jpg" width="392" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: Available online 29 August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical〈/p〉 〈p〉Author(s): Xiangmei Li, Xinze Wu, Jin Wang, Qicheng Hua, Jinxiao Wu, Xing Shen, Yuanming Sun, Hongtao Lei〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this study, colloidal gold (CG), latex microspheres (LM), and time-resolved fluorescent microsphere (TrFM), were utilized as the antibody labeled tracers in three kinds of lateral flow immunochromatographic assays (LFIAs), which were established to detect tylosin (TYL) and tilmicosin (TIM) residues in milk and pork. The cut-off values of the CG-LFIA, LM-LFIA, and TrFM-LFIA for TYL in milk were 8, 4, and 2 ng/mL, respectively, and that for pork were 15, 8, and 4 μg/kg, respectively. The sample preparation of the three LFIAs is simple and fast, and the results can be acquired within 5-8 min. The three LFIAs have a strong cross-reaction to TIM and can be applied to simultaneously detect TIM. Forty milk samples were analyzed by both the three LFIAs and LC-MS/MS, the results showed a good correlation between the four methods, and no false positive or false negative results were found, indicating that the developed three assays could provide rapid, reliable, and multi-selective technical support for the on-site determination of macrolide antibiotics or other pollutants residues in a considerable amount of samples.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519312584-ga1.jpg" width="301" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: Available online 29 August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical〈/p〉 〈p〉Author(s): Mohammad Khavani, Mohammad Izadyar, Mohammad Reza Housaindokht〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Different sensors composed of aptasensor have been largely designed for detection of many analytes recently due to the ease of detection, high sensitivity, and potential for high-throughput analysis. In this article, a joint theoretical and experimental study was performed to design new gold nanoparticle based colorimetric aptasensor. At the first step, by employing molecular dynamic (MD) simulations, twenty new RNA aptamers for detection of neomycin B (NB) were theoretically designed. The sensing ability and their binding affinity of these aptamers toward NB were investigated from the theoretical viewpoint and the predicted behaviors were compared with that of the wild type aptamer (AP-W). Theoretical results indicated that two aptamers of AP-M18 and AP-M20 have a greater affinity toward NB in comparison with AP-W. At the next step, AP-M18, AP-M20 and AP-W were synthesized and their affinity and selectivity toward NB were investigated by gold nanoparticles (AuNPs) based colorimetric method. On the basis of experimental results, the calculated limit of detection (LOD) values of AP-M18 and AP-M20 are 27 and 360 nM, respectively, which are lower than that of AP-W (470 nM). Moreover, quantum chemistry calculations indicated that van der Waals and electrostatic interactions may be the driving force of the NB complexation. A greater affinity of AP-M18 against NB can be explained by the possible stronger donor-acceptor interactions. A good agreement between different predicted properties with the experimental results suggests the ability of the theoretical methods to design new aptamers for detection of various targets.〈/p〉〈/div〉 〈h5〉Graphical Abstract〈/h5〉 〈div〉 〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519311463-ga1.jpg" width="301" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉 〈p〉Experimental investigation indicates that the theoretical methods have an interesting ability for designing new aptasensors for detection of different targets.〈/p〉 〈/div〉

Beschreibung: 〈p〉Publication date: Available online 29 August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical〈/p〉 〈p〉Author(s): Xiaohui Lu, Jin Wang, Guodong Lu, Bo Lin, Meizhuo Chang, Wei He〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉China grows and consumes numerous types of tea, which have diverse processing techniques. West Lake Longjing Tea is one of the most famous and popular varieties of tea in China. It is difficult for consumers to assess the quality of Longjing green tea, as it usually requires well-trained experts to make the judgement based on colour, aroma, and taste. To this end, we propose a quality identification system consisting of a self-developed electronic nose and a data analysis algorithm to assess the quality of West Lake Longjing Tea based on its aroma. The equipment was tested extensively in experiments conducted on real-world data. The results show that the proposed system is capable of distinguishing the tea grades accurately. Furthermore, we studied the quality specifications of Longjing tea sold by different brands and found that standard certified brands have more accurate quality identification criteria than non-standard certified brands. Our findings will assist customers and tea factories in evaluating the quality of Longjing Tea and guide the optimisation of quality standards.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 1 December 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 300〈/p〉 〈p〉Author(s): Hao Guo, Kun Qian, Anjiang Cai, Jun Tang, Jun Liu〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉We demonstrate a method for fabricating nanoparticles in a line at the top of silver wrinkled structures by tilting the substrate. The center of gravity of the colloidal droplets was moved backward, resulting in a small volume of droplets at the front of the colloidal droplet. The droplet rapidly evaporated, and the nanoparticles that remained formed lines of highly ordered nanoparticles. The distance between the nanoparticles changed after stretching the PDMS substrate due to the Poisson effect. An optimal plasma effect was achieved by controlling the distance between the nanoparticles. Finally, the Surface-Enhanced Raman Scattering (SERS) effects of CV and R6G molecules in water were determined, and the detection limit was 10〈sup〉−20〈/sup〉 M. This method provides an extremely high sensitivity SERS substrate for the detection of biomolecules.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Jin Her, Hunho Jo, Changill Ban〈/p〉

Beschreibung: 〈p〉Publication date: 15 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 299〈/p〉 〈p〉Author(s): Gao-Chao Fan, Zimeng Li, Yanwei Lu, Linzheng Ma, Huan Zhao, Xiliang Luo〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Resulting from nonspecific adsorption or obvious biofouling, target detection in real biological media is a potential challenge for most of the biosensors. Herein, we first report an antifouling photoelectrochemical (PEC) cytosensor by using zwitterionic peptide. The typical cervical carcinoma Henrietta Lacks (HeLa) cell was chosen as a target model and the aptamer AS1411 was used as its recognition element. TiO〈sub〉2〈/sub〉 nanoparticles (NPs) and ZnIn〈sub〉2〈/sub〉S〈sub〉4〈/sub〉 nanocrystals (NCs) were modified in order on a bare indium–tin oxide (ITO), forming ITO/TiO〈sub〉2〈/sub〉/ZnIn〈sub〉2〈/sub〉S〈sub〉4〈/sub〉 electrode as the PEC matrix to immobilize aptamer AS1411 and zwitterionic peptide. The fabricated PEC cytosensor exhibited a high sensitivity toward HeLa cell detection, with the detection limit of 34 cells/mL. Besides, owning to excellent antifouling property of the zwitterionic peptide, evidently reduced nonspecific adsorption of the cytosensor was realized in the biological media.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉 〈p〉An efficient but general strategy for antifouling photoelectrochemical cytosensor was proposed by introducing zwitterionic peptide. The cytosensor demonstrated the distinct merits of high sensitivity and low fouling in the biological media.〈/p〉 〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519311955-ga1.jpg" width="283" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉 〈/div〉

Beschreibung: 〈p〉Publication date: 15 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 299〈/p〉 〈p〉Author(s): Xiang Tao, Tan Dai Nguyen, Hao Jin, Ran Tao, Jingting Luo, Xin Yang, Hamdi Torun, Jian Zhou, Shuyi Huang, Lin Shi, Des Gibson, Michael Cooke, Hejun Du, Shurong Dong, Jikui Luo, YongQing Fu〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Manipulating biological cells or microparticles in three dimensions (3D) is invaluable for many biomedical applications, and recently effective and rapid manipulations of microparticles in 2D and 3D within microchannels or chambers using surface acoustic waves (SAWs) with bulk piezoelectric materials have been reported. However, these are generally expensive, or brittle and cannot be easily integrated into a single lab-on-chip. In this paper, we realized microparticle/cell patterning and 3D manipulation of yeast cells inside a chamber with a height of 1 mm using thin film ZnO/Si SAW devices. Effects of SAW frequency, channel width and thickness on alignment of microparticles were firstly investigated, and positions of the microparticles in the direction of SAW propagation can be controlled precisely by changing the phase angle of the acoustic waves from the ZnO/Si SAW device. A numerical model has been developed to investigate the SAW acoustic field and the resulted 3D motions of microparticles under the acoustic radiation forces within the microchamber. Finally, we realized and observed the 3D patterning of yeast cells within the microchannel. Our work shows a great potential for acoustofluidic, neural network research and biomedical applications using the ZnO/Si SAW devices.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 299〈/p〉 〈p〉Author(s): Oleg Lupan, Vasile Postica, Thierry Pauporté, Bruno Viana, Maik-Ivo Terasa, Rainer Adelung〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this work, we investigated performances of individual and multiple networked Au nanoparticles (NPs)-functionalized ZnO nanowires (NWs) integrated into nanosensor devices using dual beam focused ion beam/scanning electron microscopy (FIB/SEM) and tested them as gas sensors at room temperature. Such important parameters as diameter and relative humidity (RH) on the gas sensing properties were investigated in detail. The presented results demonstrate that thin Au/ZnO NWs (radius of 60 nm) have a gas response of 〈em〉I〈sub〉gas〈/sub〉/I〈sub〉air〈/sub〉〈/em〉 of about 7.5–100 ppm of H〈sub〉2〈/sub〉 gas which is higher compared to 〈em〉I〈sub〉gas〈/sub〉/I〈sub〉air〈/sub〉〈/em〉 of about 1.2 for NWs with a radius of 140 nm. They have a low dependence of electrical parameters on water vapors presence in environment, which is very important for practical and real time applications in ambient atmosphere. Also, the devices based on multiple networked Au/ZnO NWs demonstrated a higher gas response of 〈em〉I〈sub〉gas〈/sub〉/I〈sub〉air〈/sub〉〈/em〉 about 40 and a lower theoretical detection limit below 1 ppm compared to devices based on an individual NW due to the presence of multiple potential barriers between the NWs. The corresponding gas sensing mechanisms are tentatively proposed. The proposed concept and models of nanosensors are essential for further understanding the role of noble metal nanoclusters on semiconducting oxide nanowires and contribute for a design of new room-temperature gas sensors.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519311761-ga1.jpg" width="265" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 299〈/p〉 〈p〉Author(s): Ye Liu, Fei Zhou, Hongcheng Wang, Xiaoyuan Huang, Dongxiong Ling〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Coffee-ring structures, which are easy to prepare, have many hotspots for surface-enhanced Raman scattering (SERS). However, the inhomogeneous distribution of hotspots causes very poor SERS detection reproducibility, which strongly restricts their practical applications. In this paper, by combining a coffee-ring structure with the waveguide effect of optical fibers, we propose novel micro-coffee-ring-patterned fiber SERS probes fabricated by a laboratory-developed laser-induced dynamic dip-coating method. The mechanisms of micro-coffee-ring formation on fiber facet are analyzed in detail. With the help of a programmable dip-coater, micro-coffee-ring-patterned fiber SERS probes can be automatically and reproducibly fabricated, and they simultaneously show high sensitivity and good reproducibility in SERS detections. A detection limit lower than 10〈sup〉−8〈/sup〉 M in aqueous solvent for thiram and methyl parathion (MP) is achieved, and the relative standard deviation (RSD) of the SERS peaks is less than 6%. In addition, benefiting from numerous hotspots provided by micro-coffee rings, this micro-coffee-ring-patterned fiber SERS probe presents superior performance in 〈em〉in-situ〈/em〉 trace detection of target molecules in complex liquid environments. Detection sensitivities of 10〈sup〉−7〈/sup〉 M for thiram in lake water and in orange juice and 10〈sup〉−6〈/sup〉 M for melamine and tetracycline in liquid milk are achieved.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 299〈/p〉 〈p〉Author(s): Xiaofang Qiao, Zhiming Ma, Lihui Si, Wei Ding, Guangmeng Xu〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this paper, a lanthanide cation, Eu(III), was firstly coordinated with a series of organic antenna ligands and then doped into bio-MOF-1 via cation exchange for O〈sub〉2〈/sub〉 optical sensing. These organic ligands were supposed to increase dynamic collision probability between O〈sub〉2〈/sub〉 molecules and excited probe molecules, so that sensitivity could be increased and response time could be decreased. These composite samples were firstly identified using SEM, XRD, N〈sub〉2〈/sub〉 adsorption/desorption and ICP measurement to confirm their microstructure. Then their absorption spectra, emission spectra and emission lifetimes were discussed. It was found that these composite samples showed long emission lifetime up to 595 μs, which ensured enough time for O〈sub〉2〈/sub〉 collision. Their O〈sub〉2〈/sub〉 sensing performance was discussed via their emission spectra under increasing O〈sub〉2〈/sub〉 concentrations. Linear sensing curves were observed for all samples. It was found that a large conjugation plane improved sensitivity and decreased response time since this large conjugation plane increased dynamic collision probability. The sensing mechanism was confirmed as the O〈sub〉2〈/sub〉 quenching on long-range energy roll-back from ligand triplet state to bio-MOF-1. The highest sensitivity and the shortest response time were obtained as 6.96, three times higher than literature values, and 12 s, respectively.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519311773-ga1.jpg" width="276" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 1 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 298〈/p〉 〈p〉Author(s): Naveen Kumar Sompalli, Akhila Maheswari Mohan, C.V.S. Brahmananda Rao, Sivaraman Nagarajan, Prabhakaran Deivasigamani〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉We present a facile approach towards the fabrication of solid state optical sensors for the naked-eye sensing of carcinogenic Cr〈sup〉6+〈/sup〉 ions, using porous polymer and silica monoliths, as probe anchoring templates. The monoliths proffer superior structural properties of high surface area and capacious pore size for the uniform and voluminous probe anchoring. The surface morphology and structural features of the monoliths are analyzed using various surface and structural characterization techniques. The solid-state optical sensors are concocted by the transmogrification of monoliths through impregnation of an amphipathic chromoionophore 〈em〉i.e.〈/em〉, 〈em〉1,5〈/em〉-bis-(〈em〉4〈/em〉-butylphenyl)carbazone (BBPC), as the ion-sensing probe. The sensors offer long-term stability and rapid response kinetics (〈 10 min) with superior ion-selectivity for ultra-trace Cr〈sup〉6+〈/sup〉 ions. The ascendancy of physicochemical parameters with reference to solution pH, probe concentration, response kinetics, medium temperature, sensor capacity, linear signal response, selectivity, and sensitivity has been optimized. The sensors exhibit a linear signal response for Cr〈sup〉6+〈/sup〉 ions in the concentration range of 5–125 ppb and 3–150 ppb, for silica and polymer sensors, respectively. The solid-state sensor systems exhibit excellent data reliability and reproducibility (RSD ≤ 2.85%), with an L〈sub〉D〈/sub〉 of 1.87 and 0.41 ppb, and an L〈sub〉Q〈/sub〉 of 6.23 and 1.36 ppb, for silica and polymer sensors, respectively.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925400519310950-ga1.jpg" width="461" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Xiaowei Li, Chaohan Han, Dongxiao Lu, Changlu Shao, Xinghua Li, Yichun Liu〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The size of sensing materials matters a lot to the performance of gas sensors. Herein, size-controlled three-component ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉/Au nanomeshes were elaborately prepared by combining electrospinning, atomic layer deposition and room-temperature solution reaction methods. The as-prepared ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉/Au is characterized by uniform ZnO nanotube skeletons (˜50 nm), ultrathin ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉 nanosheets (˜10 nm) and well-dispersed Au nanoparticles. To demonstrate the superiority of such ultrafine ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉/Au nanomeshes, a comparison of sensing performance between the gas sensors fabricated by pristine ZnO, ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉 and ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉/Au was carried out. Results of the measurement evidence that the sensor based on ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉/Au nanomeshes exhibited the highest sensing response, significantly enhanced selectivity, and faster response/recover speed compared with the other two reference counterparts. The response of ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉/Au towards acetone was improved about 3-fold versus the ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉 composites and 5.5-fold versus pristine ZnO. The enhanced gas sensing performance was found to be closely related to the highly electron-depleted layer derived from the small material size and the interfacial heterojunctions as well as the sensitization effect endowed by the Au nanoparticles. This study shows the great potential of ZnO/ZnFe〈sub〉2〈/sub〉O〈sub〉4〈/sub〉/Au nanomeshes on acetone detection and provides a promising mean for the rational design of high-performance gas sensor.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 15 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Sensors and Actuators B: Chemical, Volume 297〈/p〉 〈p〉Author(s): Mingquan Pi, Chuantao Zheng, Ran Bi, Huan Zhao, Lei Liang, Yu Zhang, Yiding Wang, Frank K. Tittel〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The reported chalcogenide (ChG) waveguide sensor mainly focuses on rectangular waveguide with a small evanescent field for light-gas interaction. In order to improve the sensing performance in the mid-infrared spectral range and ease wavguide fabrication, a suspended ChG/silica-on-silicon slot-waveguide gas sensor was proposed, where ChG was used as the core layer, silica was adopted as the lower buffer as well as a support layer with the silica under the waveguide core removed. The new sensor structure resulted in an increased light-gas interaction, a decreased waveguide loss in the mid-infrared and a small depth-to-width ratio for feasible slot fabrication. The optimized suspended slot waveguide reveals a large power confinement factor (PCF) of 85.77% at 3291 nm. CH〈sub〉4〈/sub〉 was adopted as the target gas for performance evaluation of the ChG/silica-on-silicon slot-waveguide sensor at the absorption line of 3038.5 cm〈sup〉−1〈/sup〉. An optimal waveguide length of 1.45 cm was determined with a waveguide loss of 3 dB/cm for maximizing the sensitivity. The response time is as short as 〈3 μs due to the exposure of the waveguide sensing area to the atmosphere. The limit of detection (LoD) was decided to be 1.70 parts-per-million (ppm) for a minimum detectable signal-to-noise ratio of 10. Effects of ambient temperature/pressure change and fabrication error on the sensor performance were discussed. The proposed suspended ChG/silica-on-silicon slot-waveguide sensor possesses a ∼ 10 times larger PCF than other reported ChG rectangular waveguide sensors in the mid-infrared and reveals an improved performance for potential environmental monitoring and wearable gas sensing applications.〈/p〉〈/div〉