ALBERT

Description: 5-aminolevulinic acid (ALA), a key precursor in the biosynthesis of porphyrins, can improve plant tolerance to various environmental stresses. However, it is unclear whether ALA can improve tolerance in poplar. Here, we investigated the effects of ALA on poplars under drought and salt stresses. ALA pretreatment exhibited less morphological damage, reduced leaf malonaldehyde content (MDA) and electrolyte leakage (EL), and increased leaf relative water content (RWC), proline (PRO), superoxide dismutase (SOD), and peroxidase (POD) content under stresses. Furthermore, exogenous ALA mitigated the decrease in photosynthetic capacity, and restored the chlorophyll content (Chl), net CO2 assimilation rate, stomatal conductance (Gs), transpiration rate (Tr), maximal photochemical quantum yield of PSII (Fv/Fm), actual quantum yield of photosynthesis (YII), and electron transfer rate (ETR) of poplar under various stresses. qRT-PCR showed that ALA up-regulated the expression of antiporters and aquaporins genes, which are associated with Na+ exclusion in the leaf cells and the transport activity of aquaporins. In summary, ALA pretreatment significantly improved the stress tolerance of poplar, decreasing the degree of membrane lipid peroxidation and promoting the photosynthesis and antioxidant capacity of leaves. In addition, our results showed that ALA might mediate Na+ transporter and aquaporins activity, thereby increasing the salt tolerance of poplar.

Description: Rotifers are the most diverse group in freshwater zooplankton and play an important role in food webs and ecosystems. DNA barcoding has become a useful approach to investigate species diversity at local and regional scales, but its application is still limited by efficient primers for the group. To test a pair of primers 30F/885R recently designed for rotifers, we applied them to investigating regional species diversity in the freshwater of South China. We sequenced the cytochrome c oxidase subunit I (COI) gene of rotifers collected from the investigated 23 reservoirs in a large river basin and obtained 145 COI sequences from 33 species in 14 genera. The mean PCR success rate for all tested species was 50%. The 145 sequenced mtCOI in this study covered 33 of 64 identified morphological taxa, including most of the common species in the basin. The intraspecific genetic distance was calculated with a K2P model for 24 rotifer species occurring in the quantitative samples, in which 15 rotifers, such as Keratella cochlearis and Brachionus calyciflorus, had a genetic distance higher than 5%. The high intraspecific genetic differentiation indicates that cryptic species are probably common in (sub)tropical China.

Description: A previous study revealed low survival rates for Japanese larch (Larix kaempferi) summer-planted seedlings grown in Hiko-V-120 containers. This study examines nursery practices that could potentially prevent deterioration of the seedling water balance after planting to improve the survival rate of this species, which has a low drought tolerance. During summer planting, we tested (1) drought hardening or high-potassium fertilization for two months before planting, (2) antitranspirant or topping treatment at planting, and (3) the use of the JFA-150 container with a larger capacity and lower growing density than the Hiko-V-120 container. Drought hardening increased seedling drought tolerance because of the low leaf:root ratio, due to lower leaf mass production, resulting in increased survival from 74% to 93% in Hiko-V-120 containers. When JFA-150 containers were used, the leaf:root ratio was lower because of higher root mass, resulting in an increase in survival to 87%, with the highest survival of 97% when combined with drought hardening. The application of antitranspirant increased survival to over 90%, whereas topping did not, probably because of severer competition from weeds. High-potassium fertilization did not affect seedling traits or survival. For better survival of summer-planted container-grown Japanese larch seedlings, it is recommended that they be grown in containers providing sufficient cell volume and density for root growth while the seedlings are in the nursery and that irrigation be withheld for two months before planting. In addition, to obtain higher survival, an antitranspirant can be applied at planting at a cost.

Description: Australia has a very diverse pea-flowered legume flora with 1715 native and naturalised species currently recognised. Tribe Mirbelieae s.l. includes 44% of Australia’s peas in 24 genera with 756 recognised species. However, several genera within the Pultenaea alliance in tribe Mirbelieae are considered to be non-monophyletic and two main options have been proposed: option one is to merge ca. 18 genera containing ca. 540 species (the largest genus, Pultenaea has nomenclatural priority); and option two is to re-circumscribe some genera and describe new genera as required to form monophyletic groups. At the species level, option one would require 76% of names to be changed; whereas based on available data, option two is likely to require, at most, 8.3% of names to change. Option two therefore provides the least nomenclatural disruption but cannot be implemented without a robust phylogenetic framework to define new generic limits. Here we present novel analyses of available plastid DNA data (trnL-F) which suggest that option two would be feasible once sufficient data are generated to resolve relationships. However, the reticulate evolutionary histories or past rapid speciation suggested for this group may prevent the resolution of all nodes. We propose targeted use of Next-Generation Sequencing technology as the best way to resolve relationships between the key clades in the tribe and present a framework for such a study. An overview of current taxonomy in the tribe is presented, along with the state of taxonomic knowledge and availability of published descriptions for electronic flora treatments. Several new combinations and typifications are published in an appendix.

Description: Many factors govern the flow of deposited nitrogen (N) through forest ecosystems and into stream water. At the Fernow Experimental Forest in WV, stream water nitrate (NO3−) export from a long-term reference watershed (WS 4) increased in approximately 1980 and has remained elevated despite more recent reductions in chronic N deposition. Long-term changes in species composition may have altered forest N demand and the retention of deposited N. In particular, the abundance and importance value of Acer saccharum have increased since the 1950s, and this species is thought to have a low affinity for NO3−. We measured the relative uptake of NO3− and ammonium (NH4+) by six important temperate broadleaf tree species and estimated stand uptake of total N, NO3−, and NH4+. We then used records of stream water NO3− and stand composition to evaluate the potential impact of changes in species composition on NO3− export. Surprisingly, the tree species we examined all used both mineral N forms approximately equally. Overall, the total N taken up by the stand into aboveground tissues increased from 1959 through 2001 (30.9 to 35.2 kg N ha−1 yr−1). However, changes in species composition may have altered the net supply of NO3− in the soil since A. saccharum is associated with high nitrification rates. Increases in A. saccharum importance value could result in an increase of 3.9 kg NO3−-N ha−1 yr−1 produced via nitrification. Thus, shifting forest species composition resulted in partially offsetting changes in NO3− supply and demand, with a small net increase of 1.2 kg N ha−1 yr−1 in NO3− available for leaching. Given the persistence of high stream water NO3− export and relatively abrupt (~9 year) change in stream water NO3− concentration circa 1980, patterns of NO3− export appear to be driven by long-term deposition with a lag in the recovery of stream water NO3− after more recent declines in atmospheric N input.

Description: The introduction of new species in forest management must be undertaken with a degree of care, to help prevent the spread of invasive species. However, new species with higher profitability are needed to increase forest products value and the resilience of rural populations. Paulownia tomentosa has an extremely fast growth. The objective and novelty of this work was to study the potential use of young Paulownia trees grown in Portugal by using heat treatment to improve its properties, thereby allowing higher value applications of the wood. The average chemical composition of untreated and heat-treated wood was determined. The extractive content was determined by successive Soxhlet extraction with dichloromethane (DCM), ethanol and water as solvents. The composition of lipophilic extracts was performed by injection in GC-MS with mass detection. Insoluble and soluble lignin, holocellulose and α-cellulose were also determined. Physical (density and water absorption and dimensional stability) and mechanical properties (bending strength and bending stiffness) and termite resistance was also determined. Results showed that extractive content increased in all solvents, lignin and α-cellulose also increased and hemicelluloses decreased. Compounds derived from the thermal degradation of lignin were found in heat-treated wood extractions. Dimensional stability improved but there was a decrease in mechanical properties. Resistance against termites was better for untreated wood than for heat-treated wood, possibly due to the thermal degradation of some toxic extractives.

Description: Molecular genetic techniques (FISH, RT-PCR, and metagenomic analysis) were used to investigate the comparative functional biodiversity in the prokaryotic complex in grassland and forests’ sod-podzol under polycyclic aromatic hydrocarbon influence. The polluted samples showed a decrease in the biomass of the prokaryotic community representatives and a change in the metabolically active dominants–representatives of the Bacteria and Archaea domains compared to the control samples. The suppression of the metabolic activity of prokaryote cells under the influence of PAHs in sod-podzolic soil under meadow vegetation was more pronounced compared to soils under forest vegetation. The representatives of prokaryotes that are sensitive and resistant to the studied PAHs were identified. The representatives of the phylogenetic groups from the bacterial complex resistant to PAH pollution were Proteobacteria (Alphaproteobacteria), Bacteroidetes, Firmicutes, Chloroflexi, and Thaumarhaeota in the archaeal complex. Representatives of the phylum Acidobacteria and Actinobacteria (Streptosporangiales) are noted among those sensitive to PAH contamination. The presence and expression of the functional alkane monooxygenase (alkB) gene were established in all the experimental variants studied. In the plant variants, the number of copies of alkB genes increased by an order of magnitude and the biomass of metabolically active prokaryotic representatives with the functional alkB gene doubled compared to the unpolluted territories. The copy number index of the alkB gene can be used as one of the parameters when characterizing an ecosystem for the presence of PAH pollutants.

Description: It is important to understand price premiums related to certified raw wood to predict the future of forest certifications from the perspective of forestry enterprises. We focused on identifying the trading roundwood market data in the economic center of power in Tokyo. This study aimed to clarify Tama-certified raw wood prices under the local area certification scheme, forest-certified raw wood prices, and the handling volumes at the Tama Roundwood Market Center in Tokyo. Sales details of the Tama Roundwood Market Center were used to identify the handling volumes, Tama-certified raw wood prices, and FSC (Forest Stewardship Council) or SGEC (Japan-specific Sustainable Green Ecosystem Council)-certified raw wood prices. The FSC and SGEC have operated from the center since 2016. Data were collected from the 2006–2018 fiscal years. Our results showed that the volume of raw wood handled increased due to the regeneration-cutting project conducted by the Tokyo Metropolitan Government. On the other hand, there was no price premium for Tama-certified raw wood under the local certification scheme or for FSC- or SGEC-certified raw wood. Price premiums for forest certifications are necessary for ongoing sustainable forest management. There is a need to increase consumer awareness of forest certifications and to differentiate quality certifications further, and these would likely create price premiums.

Description: Laser scanning via LiDAR is a powerful technique for collecting data necessary for Digital Terrain Model (DTM) generation, even in densely forested areas. LiDAR observations located at the ground level can be separated from the initial point cloud and used as input for the generation of a Digital Terrain Model (DTM) via interpolation. This paper proposes a quantitative analysis of the accuracy of DTMs (and derived slope maps) obtained from LiDAR data and is focused on conditions common to most forestry activities (rough, steep terrain with forest cover). Three interpolation algorithms were tested: Inverse Distance Weighted (IDW), Natural Neighbour (NN) and Thin-Plate Spline (TPS). Research was mainly focused on the issue of point data density. To analyze its impact on the quality of ground surface modelling, the density of the filtered data set was artificially lowered (from 0.89 to 0.09 points/m2) by randomly removing point observations in 10% increments. This provides a comprehensive method of evaluating the impact of LiDAR ground point density on DTM accuracy. While the reduction of point density leads to a less accurate DTM in all cases (as expected), the exact pattern varies by algorithm. The accuracy of the LiDAR-derived DTMs is relatively good even when LiDAR sampling density is reduced to 0.40–0.50 points/m2 (50–60 % of the initial point density), as long as a suitable interpolation algorithm is used (as IDW proved to be less resilient to density reductions below approximately 0.60 points/m2). In the case of slope estimation, the pattern is relatively similar, except the difference in accuracy between IDW and the other two algorithms is even more pronounced than in the case of DTM accuracy. Based on this research, we conclude that LiDAR is an adequate method for collecting morphological data necessary for modelling the ground surface, even when the sampling density is significantly reduced.

Description: Emerald ash borer (EAB), (Agrilus planipennis Fairmaire), first identified in 2002 in southeast Michigan, has caused catastrophic ash (Fraxinus spp.) mortality in forests within the core of the invasion and has spread to 35 states and five Canadian provinces. Little is known about persistence and densities of EAB populations in post-invasion sites after most ash trees have died. We monitored EAB populations from 2014 to 2016 using double decker (DD) traps set in the midst of white ash (F. americana) trees in 30 post-invasion sites in southeast and south-central Michigan. Two DD traps were deployed at each site. One trap had a dark green upper prism and light purple lower prism, both baited with cis-3-hexenol lures. The other had two dark purple prisms baited with cis-3-hexenol on the upper prism and Manuka oil on the lower prism. In 2014 and 2016, size and condition of ash trees were recorded and area of live white ash phloem was estimated in an 18-m-radius plot centered around each of the DD traps. Area of live white ash phloem per site ranged from approximately 24 to 421 m2 in 2014 and from 24 to 411 m2 in 2016. Canopy condition of live white ash trees generally improved; 65% and 89% of the trees had healthy canopies (

Description: TouchTerrain is a simple-to-use web application that makes creating 3D printable terrain models from anywhere on the globe accessible to a wide range of users, from people with no GIS expertise to power users. For coders, a Python-based standalone version is available from the open-source project's GitHub repository. Analyzing 18 months of web analytics gave us a preliminary look at who is using the TouchTerrain web application and what their models are used for; and to map out what terrains on the globe they chose to 3D print. From July 2019 to January 2021, more than 20,000 terrain models were downloaded. Models were created for many different use cases, including education, research, outdoor activities and crafting mementos. Most models were realized with 3D printers, but a sizable minority used CNC machines. Our own experiences with using 3D printed terrain in a university setting have been very positive so far. Anecdotal evidence points to the strong potential for 3D printed terrain models to provide significant help with specific map-related tasks. For the introductory geology laboratory, 3D printed models were used as a form of “training wheels” to aid beginning students in learning to read contour maps, which are still an important tool for geology.

Description: The arrangement of habitat features via historical or contemporary events can strongly influence genomic and demographic connectivity, and in turn affect levels of genetic diversity and resilience of populations to environmental perturbation. The rusty blackbird (Euphagus carolinus) is a forested wetland habitat specialist whose population size has declined sharply (78%) over recent decades. The species breeds across the expansive North American boreal forest region, which contains a mosaic of habitat conditions resulting from active natural disturbance regimes and glacial history. We used landscape genomics to evaluate how past and present landscape features have shaped patterns of genetic diversity and connectivity across the species’ breeding range. Based on reduced-representation genomic and mitochondrial DNA, genetic structure followed four broad patterns influenced by both historical and contemporary forces: (1) an east–west partition consistent with vicariance during the last glacial maximum; (2) a potential secondary contact zone between eastern and western lineages at James Bay, Ontario; (3) insular differentiation of birds on Newfoundland; and (4) restricted regional gene flow among locales within western and eastern North America. The presence of genomic structure and therefore restricted dispersal among populations may limit the species’ capacity to respond to rapid environmental change.

Description: Determining migratory connectivity within and among diverse taxa is crucial to their conservation. Insect migrations involve millions of individuals and are often spectacular. However, in general, virtually nothing is known about their structure. With anthropogenically induced global change, we risk losing most of these migrations before they are even described. We used stable hydrogen isotope (δ2H) measurements of wings of seven species of butterflies (Libytheana carinenta, Danaus gilippus, Phoebis sennae, Asterocampa leilia, Euptoieta claudia, Euptoieta hegesia, and Zerene cesonia) salvaged as roadkill when migrating in fall through a narrow bottleneck in northeast Mexico. These data were used to depict the probabilistic origins in North America of six species, excluding the largely local E. hegesia. We determined evidence for long-distance migration in four species (L. carinenta, E. claudia, D. glippus, Z. cesonia) and present evidence for panmixia (Z. cesonia), chain (Libytheana carinenta), and leapfrog (Danaus gilippus) migrations in three species. Our investigation underlines the utility of the stable isotope approach to quickly establish migratory origins and connectivity in butterflies and other insect taxa, especially if they can be sampled at migratory bottlenecks. We make the case for a concerted effort to atlas butterfly migrations using the stable isotope approach.

Description: Control of seed germination and dormancy is important in seed plant adaptation and evolution. When studying seed dormancy of Quercus species, we observed a substantially delayed shoot emergence following a fast root emergence in Quercus chungii F.P.Metcalf. Since epicotyl physiological dormancy (PD) has not been reported in Quercus section Cyclobalanopsis, we examined seed morphology and germination in Q. chungii and aimed to document epicotyl PD in the seeds. The embryo was fully developed in fresh ripe seeds. The elongating cotyledonary petiole pushed the embryo axis out of the seed during germination, which differed from observations in other Quercus species. Shoots emerged from seeds with developing roots after 3 months of warm stratification (35/25 °C), reaching the highest percentage of shoot emergence in seeds after 5 months. Seeds were recalcitrant and displayed a yet unreported epicotyl PD type, for which we propose the formula Cnd(root) ‒ Cp’’ 2b(shoot). Early emergence and development of the root system in Q. chungii seeds with epicotyl PD appears to be a mechanism to maintain a constant water supply to the shoot during plumule development and emergence. Our documentation of seed germination will provide guidance for the conservation and restoration of this species from seeds.

Description: The development of generalisation (simplification) methods for the geometry of features in digital cartography in most cases involves the improvement of existing algorithms without their validation with respect to the similarity of feature geometry before and after the process. It also consists of the assessment of results from the algorithms, i.e., characteristics that are indispensable for automatic generalisation. The preparation of a fully automatic generalisation for spatial data requires certain standards, as well as unique and verifiable algorithms for particular groups of features. This enables cartographers to draw features from these databases to be used directly on the maps. As a result, collected data and their generalised unique counterparts at various scales should constitute standardised sets, as well as their updating procedures. This paper proposes a solution which consists in contractive self-mapping (contractor for scale s = 1) that fulfils the assumptions of the Banach fixed-point theorem. The method of generalisation of feature geometry that uses the contractive self-mapping approach is well justified due to the fact that a single update of source data can be applied to all scales simultaneously. Feature data at every scale s 〈 1 are generalised through contractive mapping, which leads to a unique solution. Further generalisation of the feature is carried out on larger scale spatial data (not necessarily source data), which reduces the time and cost of the new elaboration. The main part of this article is the theoretical presentation of objectifying the complex process of the generalisation of the geometry of a feature. The use of the inherent characteristics of metric spaces, narrowing mappings, Lipschitz and Cauchy conditions, Salishchev measures, and Banach theorems ensure the uniqueness of the generalisation process. Their application to generalisation makes this process objective, as it ensures that there is a single solution for portraying the generalised features at each scale. The present study is dedicated to researchers concerned with the theory of cartography.

Description: Skeletonema dohrnii is a common red tide microalgae occurring in the coastal waters and throughout the world. The associated heterotrophic or autotrophic bacteria play vital roles in regulating algal growth, production, and physiology. In this study, we investigated the detailed bacterial community structure associated with the growth of S. dohrnii’s using high-throughput sequencing-based on 16S rDNA. Our results demonstrated that Bacteroidetes (48.04%) and Proteobacteria (40.66%) in all samples accounted for the majority of bacterial populations. There was a significant linear regression relationship between the abundance of bacterial phyla and culture time. Notable shifts in bacterial community composition were observed during algal growth: Flavobacteriales accounted for the vast majority of sequences at the order level. Furthermore, the relative abundance of Rhodobacterales was gradually reduced during the whole growth process of S. dohrnii (0–12 days). However, beyond that, the relative abundance of Marinobacter was slowly increasing. It is noteworthy that five fluorophores (Peaks T1, T2, I, M, and A) were detected during the growth stage of S. dohrnii. The characteristic indexes (fluorescence index, humification index, and biological index) of chromophoric dissolved organic matter (CDOM) also varied with the culture time. In addition, the taxa of bacteria had certain effects on CDOM and they were inextricably linked to each other.

Description: The rheological properties of wood–plastic composites (WPCs) with different wood fiber contents were investigated using a rotational rheometer under low shear rates. The flow field information was analyzed and simulated by Ansys Polyflow software. The results showed that the WPCs with different wood fiber contents behaved as typical power-law fluids. A higher wood fiber content increased the shear thinning ability and pseudoplasticity of the WPCs. The pressure, velocity, shear rate, and viscosity distributions of the WPC during extrusion could be predicted by computational fluid dynamics (CFD) Ansys Polyflow software to explore the effects of different components on the flow field of WPCs.

Description: The Mediterranean basin constitutes one of the largest global biodiversity hotspots, hosting more than 11,000 endemic plants, and it is recognised as an area with a high proportion of threatened taxa. Nevertheless, only a tiny fraction of the threatened Mediterranean endemics have their genetic diversity assessed, and we are unaware if and how climate change might impact their conservation status. This is even more pronounced in Eastern Mediterranean countries with a rich endemic flora, such as Greece, which hosts a large portion of the plant taxa assessed at the European level under the IUCN criteria. Using inter simple sequence repeats (ISSR) markers and species distribution models, we analysed the genetic diversity and investigated the impacts of climate change on four critically endangered and extremely narrow and rare Greek island endemic plants, namely Aethionema retsina, Allium iatrouinum, Convolvulus argyrothamnos, and Saponaria jagelii. All four species are facing intense anthropogenic threats and display moderate genetic diversity (uHe: 0.254–0.322), while climate change is expected to have a profound impact on their range size during the coming decades. A combination of in- and ex-situ measures, such as population reinforcement and seed bank conservation, are urgently needed in order to preserve these highly threatened and rare Greek endemics.

Description: An early-branched moss Polytrichum commune is a widely accepted model object for ecological, environmental, physiological, and genetic studies. Its mitochondrial genome has been sequenced and annotated. The genome contains 67 genes in total and has a length equal to 114,831 bp, which exceeds the length of most known mitochondrial genomes for mosses. A phylogenetic tree based on 33 coding sequences of mitochondrial genome was constructed, and the pairwise identity of whole mitogenome sequences was estimated for 44 Bryophyta species. Based on the analysis of pairwise identity, it was shown that mitogenomes of Tetraphis pellucida and Buxbaumia aphylla sufficiently differ from those of other Bryophyta species. The first known Bryophyta mitogenome rearrangement was identified in Pogonatum inflexum within Polytrichopsida. Based on the intergenic repeats occurrence in 44 bryophyte mitochondrial genomes and available data on repetitive elements content in other Viridiplantae groups, it was noted for the first time that greater stability of the moss’s mitogenomes is probably associated mainly with the absence of long (〉1 kb) repeats. The phenomenon of absence of the intergenic repetitive elements in the terminal clades species was discovered.

Description: Light detection and ranging (LiDAR) data systems mounted on a moving or stationary platform provide 3D point cloud data for various purposes. In applications where the interested area or object needs to be measured twice or more with a shift, precise registration of the obtained point clouds is crucial for generating a healthy model with the combination of the overlapped point clouds. Automatic registration of the point clouds in the common coordinate system using the iterative closest point (ICP) algorithm or its variants is one of the frequently applied methods in the literature, and a number of studies focus on improving the registration process algorithms for achieving better results. This study proposed and tested a different approach for automatic keypoint detecting and matching in coarse registration of the point clouds before fine registration using the ICP algorithm. In the suggested algorithm, the keypoints were matched considering their geometrical relations expressed by means of the angles and distances among them. Hence, contributing the quality improvement of the 3D model obtained through the fine registration process, which is carried out using the ICP method, was our aim. The performance of the new algorithm was assessed using the root mean square error (RMSE) of the 3D transformation in the rough alignment stage as well as a-prior and a-posterior RMSE values of the ICP algorithm. The new algorithm was also compared with the point feature histogram (PFH) descriptor and matching algorithm, accompanying two commonly used detectors. In result of the comparisons, the superiorities and disadvantages of the suggested algorithm were discussed. The measurements for the datasets employed in the experiments were carried out using scanned data of a 6 cm × 6 cm × 10 cm Aristotle sculpture in the laboratory environment, and a building facade in the outdoor as well as using the publically available Stanford bunny sculpture data. In each case study, the proposed algorithm provided satisfying performance with superior accuracy and less iteration number in the ICP process compared to the other coarse registration methods. From the point clouds where coarse registration has been made with the proposed method, the fine registration accuracies in terms of RMSE values with ICP iterations are calculated as ~0.29 cm for Aristotle and Stanford bunny sculptures, ~2.0 cm for the building facade, respectively.

Description: The public-good nature of benefits of fuel management explains its current undersupply and the consequent wildfire blow. Policies to promote fuel management are thus required. To be cost-effective, they need to be informed by context-specific estimates of forest owners’ willingness-to-accept (WTA) for managing fuel. This study develops a choice-modeling approach to this problem. A survey of forest owners was undertaken in a wildfire-prone parish in Portugal. Respondents were asked about their willingness to subscribe different management contracts. A choice model was estimated and used to predict owners’ WTA for different fuel management commitments, and the marginal cost of reducing burned area in the parish. Estimated WTA amounts depend on owner type and commitment. Active owners demanded lower amounts for adopting silvicultural intervention commitments, and higher for those implying income foregone. The marginal cost of reducing burned area through fuel management increases with area, but it currently is yet smaller than the corresponding marginal benefit. Our results suggest that zero burned area is not an option and optimum fuel management lies beyond the current level. It will be shifted even beyond by targeted (key-spot) fuel management approaches; WTA differences across owners can be used to design context-specific policies that are more cost-effective.

Description: In both the Geospatial (Geo) and Building Information Modelling (BIM) domains, it is widely acknowledged that the integration of geo-data and BIM-data is beneficial and a crucial step towards solving the multi-disciplinary challenges of our built environment. The result of this integration—broadly termed GeoBIM—has the potential to be particularly beneficial in the context of the construction of large infrastructure projects, which could make use of data relating to the larger spatial extents typically handled in geographical information systems (GIS) as well as the detailed models generated by BIM. To date, GeoBIM integration has mainly been explored for buildings, in a 3D context and for small projects. This paper demonstrates the results of the next level of integration, exploring the addition of the fourth dimension by linking project schedule information to create 4D GeoBIM, examining interoperability challenges and benefits in the context of a number of use cases relating to the enabling works for a major commercial infrastructure project. The integrating power of location and time—knowing where and when data relate to—allows us to explore data interoperability challenges relating to linking real world construction data, created using commercial software, with other data sources; we are then able to demonstrate the benefits of 4D GeoBIM in the context of three decision making scenarios: examining the potential for prioritisation of noise mitigation interventions by identifying apartments closest to the noisiest construction process; development of a 4D location-enabled risk register allowing, for example, work to continue underground if a risk is specific to the top of a building; ensuring construction safety by using 3D buffering to ensure that the required distances between moving construction equipment and surrounding infrastructure are not breached. Additionally, once integrated, we are able to ‘democratize’ the data—make it accessible beyond the BIM and GIS expert group—by embedding it into a 3D/4D open source Web GIS tool.

Description: Soil loss is one of the most important causes of land degradation. It is an inevitable environmental and socio-economic problem that exists in many physiographic regions of the world, which, besides other impacts, has a direct bearing on agricultural productivity. A reliable estimate of soil loss is critical for designing and implementing any mitigation measures. We applied the widely used Revised Universal Soil Loss Equation (RUSLE) in the Khabur River Basin (KhRB) within the NW part of the Zagros Fold and Thrust Belt (ZFTB). The areas such as the NW Zagros range, characterized by rugged topography, steep slope, high rainfall, and sparse vegetation, are most susceptible to soil erosion. We used the Digital Elevation Model (DEM) of the Shuttle Radar Topography Mission (SRTM), Tropical Rainfall Measuring Mission (TRMM), Harmonized World Soil Database (HWSD), and Landsat imagery to estimate annual soil loss using the RUSLE model. In addition, we estimated sediment yield (SY) at sub-basin scale, in the KhRB where a number of dams are planned, and where basic studies on soil erosion are lacking. Estimation of SY will be useful in mitigation of excessive sedimentation affecting dam performance and watershed management in this region. We determined the average annual soil loss and the SY in the KhRB to be 11.16 t.ha−1.y−1 and 57.79 t.ha−1.y−1, respectively. The rainfall and runoff erosivity (R factor), slope length (L factor), and slope steepness (S factor), are the three main factors controlling soil loss in the region. This is the first study to determine soil loss at the sub-basin scale along with identifying suitable locations for check dams to trap the sediment before it enters downstream reservoirs. The study provides valuable input data for design of the dams to prevent excessive siltation. This study also aims at offering a new approach in relating potential soil erosion to the actual erosion and hypsometric integrals.

Description: Low-resolution Geological Survey of Pakistan (GSP) maps surrounding the region of interest show oolitic and fossiliferous limestone occurrences correspondingly in Samanasuk, Lockhart, and Margalla hill formations in the Hazara division, Pakistan. Machine-learning algorithms (MLAs) have been rarely applied to multispectral remote sensing data for differentiating between limestone formations formed due to different depositional environments, such as oolitic or fossiliferous. Unlike the previous studies that mostly report lithological classification of rock types having different chemical compositions by the MLAs, this paper aimed to investigate MLAs’ potential for mapping subclasses within the same lithology, i.e., limestone. Additionally, selecting appropriate data labels, training algorithms, hyperparameters, and remote sensing data sources were also investigated while applying these MLAs. In this paper, first, oolitic (Samanasuk), fossiliferous (Lockhart and Margalla) limestone-bearing formations along with the adjoining Hazara formation were mapped using random forest (RF), support vector machine (SVM), classification and regression tree (CART), and naïve Bayes (NB) MLAs. The RF algorithm reported the best accuracy of 83.28% and a Kappa coefficient of 0.78. To further improve the targeted allochemical limestone formation map, annotation labels were generated by the fusion of maps obtained from principal component analysis (PCA), decorrelation stretching (DS), X-means clustering applied to ASTER-L1T, Landsat-8, and Sentinel-2 datasets. These labels were used to train and validate SVM, CART, NB, and RF MLAs to obtain a binary classification map of limestone occurrences in the Hazara division, Pakistan using the Google Earth Engine (GEE) platform. The classification of Landsat-8 data by CART reported 99.63% accuracy, with a Kappa coefficient of 0.99, and was in good agreement with the field validation. This binary limestone map was further classified into oolitic (Samanasuk) and fossiliferous (Lockhart and Margalla) formations by all the four MLAs; in this case, RF surpassed all the other algorithms with an improved accuracy of 96.36%. This improvement can be attributed to better annotation, resulting in a binary limestone classification map, which formed a mask for improved classification of oolitic and fossiliferous limestone in the area.

Description: Resource partitioning, the division of limited resources by species to help avoid competition, has been observed in freshwater turtle assemblages in several natural systems but has rarely been studied in tropical African ecosystems. Here, we investigate habitat preferences of two congeneric species in the family Pelomedusidae, Pelusios castaneus and P. cupulatta, in riverine/wetland habitats in the southern Ivory Coast (West Africa). Pelusios castaneus is a widespread species across West-central African savannahs and open forests, whereas P. cupulatta is endemic to the Upper Guinean forest region in West Africa. The two species have a similar diet composition (mainly carnivorous) but diverge considerably in body size, P. cupulatta being much larger. We use hand-fishing-nets and fishing funnel traps to record turtles in 18 distinct sites and analyze habitat preferences by species at two spatial scales. At a macro-habitat scale, P. castaneus is captured mainly in marshlands, whereas P. cupulatta is found in both rivers and wetlands. The two species differ significantly in their use of: (i) banks (P. castaneus being found primarily in spots with grassy banks, whereas P. cupulatta is found in spots with forested banks), and (ii) aquatic vegetation (P. cupulatta prefers spots with more abundant aquatic vegetation than P. castaneus), but both species select sites with no or moderate current. Additionally, in sites where P. cupulatta is not found, P. castaneus expands its spatial niche at multiple habitat scales, notably invading waterbodies with forested banks. Our results suggest that these two Pelomedusid turtle species potentially compete in the freshwater habitats in the southern Ivory Coast.

Description: Analysis and risk assessment are procedures which help to improve knowledge and are very important in practice. Risk assessment is possible to conduct only on the basis of exact accurate and tested information about the given system, which truly defines the given system within the spatial–temporal context. High standards of maintenance and treatment are closely linked with the requirements for quality and reliability forestry machinery and technological equipment. These standards are closely related to the maintenance of the equipment. This manuscript is focused on the reliability of standard forest machines used in the Slovak forestry. They are relatively modern and useful in the process of transporting and handling trees. This research showed the possibility of decreasing the production costs related to the maintenance of the devices and how to increase the final profit. The results of the research showed that the analysis of reliability is significant regarding to the quality of performed maintenance and the costs paid for it.

Description: Pine forests—as natural stands and artificial plantations—are one of the most extended and common forest types in the world [...]

Description: Globally, forests provide several functions and services to support humans’ well-being and the mitigation of greenhouse gases (GHGs). The services that forests provide enable the forest-dependent people and communities to meet their livelihood needs and well-being. Nevertheless, the world’s forests face a twin environmental problem of deforestation and forest degradation (D&FD), resulting in ubiquitous depletion of forest biodiversity and ecosystem services and eventual loss of forest cover. Ghana, like any tropical forest developing country, is not immune to these human-caused D&FD. This paper reviews Ghana’s D&FD driven by a plethora of pressures, despite many forest policies and interventions to ensure sustainable management and forest use. The review is important as Ghana is experiencing an annual D&FD rate of 2%, equivalent to 135,000 hectares loss of forest cover. Although some studies have focused on the causes of D&FD on Ghana’ forests, they failed to show the chain of causal links of drivers that cause D&FD. This review fills the knowledge and practice gap by adopting the Driver-Pressures-State-Impacts-Responses (DPSIR) analytical framework to analyse the literature-based sources of causes D&FD in Ghana. Specifically, the analysis identified agriculture expansion, cocoa farming expansion, illegal logging, illegal mining, population growth and policy failures and lapses as the key drivers of Ghana’s D&FD. The study uses the DPSIR analytical framework to show the chain of causal links that lead to the country’s D&FD and highlights the numerous interventions required to reverse and halt the ubiquitous perpetual trend of D&FD in Ghana. Similar tropical forest countries experiencing D&FD will find the review most useful to curtail the menace.

Description: The research presented herein explores soil organic carbon concentration (SOCC) under monodominant primeval forests of European beech trees and their association with parent material on a regional scale. Soil sampling to a maximum depth of 0.8 m was conducted in six localities in the West, East, and South Carpathians, Eastern Albanides, and Central Apennines, situated on different parent materials. Samples were analysed for SOCC by the dry combustion method. The average SOCC values representing individual localities ranged from 12.5 g kg−1 to 154.8 g kg−1 with a 99.7% coefficient of variation. SOCC association with climatic variables and forest stand volume data available from the literature were assessed by a Pearson correlation coefficient. Differences in SOCC among localities caused by site conditions were treated as a fixed factor in Welch’s ANOVA and found to be significant (p 〈 0.05) in the majority of cases. The associations between SOCC and climatic variables or stand volume were nonsignificant or perturbed. Since they validly explained less than 10% of the overall SOCC variance, the results of multiple comparison tests were assessed and interpreted in view of distinct parent materials.

Description: Natural regeneration of sessile oak forests is a complex process whose final outcome is influenced by numerous factors. The initial phase of development of sessile oak seedlings stands out as the most critical period in the process of natural regeneration of sessile oak forests. As the available light and competition from the accompanying woody species and ground vegetation are some of the main predictors of the success of sessile oak forest regeneration, this paper presents the results of studying the influence of these factors on the regeneration dynamics and development of sessile oak seedlings. The research was conducted in sessile oak forests in northeastern Serbia in the period from 2015 to 2020. At the end of the growing season each year, the following data were collected on 180 smaller sampling plots of 1 m2 in different conditions of canopy openness: the number, height, and root collar diameter of sessile oak seedlings. Also, the percent cover of competing woody species and ground vegetation was estimated on these sample plots. The obtained results indicated that the success of sessile oak forest regeneration largely depends on the initial number of sessile oak seedlings and silvicultural treatments during the rejuvenation period, which determine the microclimatic conditions in the stand and control the competing vegetation. They also indicate that with an increase in the available light, the impact of the competing vegetation on the dynamics of regeneration and development of sessile oak seedlings is less pronounced. Accordingly, as young sessile oak seedlings need a large amount of light for survival and development, it is necessary to increase the available amount of light intensively in a short period of time (six–eight years) by reducing canopy openness and thus providing optimal conditions in which sessile oak seedlings can gain an advantage over the competing vegetation.

Description: Bark beetles are a natural part of coniferous forests. Dendroctonus mexicanus Hopkins is the most widely distributed and most destructive bark beetle in Mexico, colonizing more than 21 pine species. The objectives of this study were to generate ecological niche models for D. mexicanus and three of its most important host species, to evaluate the overlap of climate suitability of the association Dendroctonus–Pinus, and to determine the possible expansion of the bark beetle. We used meticulously cleaned species occurrence records, 15 bioclimatic variables and ‘kuenm’, an R package that uses Maxent as a modeling algorithm. The Dendroctonus–Pinus ecological niches were compared using ordination methods and the kernel density function. We generated 1392 candidate models; not all were statistically significant (α = 0.05). The response type was quadratic; there is a positive correlation between suitability and precipitation, and negative with temperature, the latter determining climatic suitability of the studied species. Indeed, a single variable (Bio 1) contributed 93.9% to the model (Pinus leiophylla Schl. & Cham). The overlap of suitable areas for Dendroctonus–Pinus is 74.95% (P. leiophylla) and on average of 46.66% in ecological niches. It is observed that D. mexicanus begins to expand towards climates not currently occupied by the studied pine species.

Description: The term “microbiome” is currently applied predominantly to assemblages of organisms with 16S rRNA genes. In this context, “microbiome” is a misnomer that has been conferred a wide-ranging primacy over terms for community members lacking such genes, e.g., mycobiome, eukaryome, and virome, yet these are also important subsets of microbial communities. Widespread convenient and affordable 16S rRNA sequencing pipelines have accelerated continued use of such a “microbiome”, but at what intellectual and practical costs? Here we show that the use of “microbiome” in ribosomal gene-based studies has been egregiously misapplied, and discuss potential impacts. We argue that the current focus of “microbiome” research, predominantly on only ‘bacteria’, presents a dangerous narrowing of scope which encourages dismissal and even ignorance of other organisms’ contributions to microbial diversity, sensu stricto, and as etiologic agents; we put this in context by discussing cases in both marine microbial diversity and the role of pathogens in global amphibian decline. Fortunately, the solution is simple. We must use descriptive nouns that strictly reflect the outcomes attainable by the methods used. “Microbiome”, as a descriptive noun, should only be used when diversity in the three recognized domains is explored.

Description: In four study plots located in silver fir and Scots pine stands in Magura National Park (southeastern Poland), the relationships between the occurrence and biomass of epigeic carabids, the volume of deadwood and soil biochemical properties were investigated. Thirteen carabid beetle species from the genera Abax, Carabus, Molops and Pterostichus were captured. Rare epigeic carabid species in the fauna of Poland and Europe, such as Carabus glabratus (Paykull), Carabus sylvestris (Panzer) and Abax schueppeli (Germar), were recorded. The number of carabid individuals and species captured as well as the mean individual biomass index at different elevations and in forests of different tree compositions differed significantly. There were no correlations between deadwood volume, carabid abundance and the mean individual biomass of the carabid beetles. The mean individual Carabidae biomass increased with elevated pH, soil carbon content, soil dehydrogenase activity and the number of stumps.

Description: Urban forest ecosystems are being developed to provide various environmental services (e.g., the preservation of urban trees) to urban inhabitants. However, some trees are deteriorated asymptomatically without exhibiting an early sign of tree displacement, which results in a higher vulnerability under dynamic wind loads, especially during typhoon seasons, in the subtropical and tropical regions. As such, it is important to understand the tilt and sway behaviors of trees to cope up with the probability of tree failure and to improve the efficacy of tree management. Tree behaviors under wind loads have been broadly reviewed in the past literature, yet thorough discussions on the measurement methods for tree displacement and its analysis of broadleaf specimens are lacking. To understand the behavioral pattern of both broadleaf and conifer species, this paper presents a detailed review of sway behavior analysis from the perspectives of the aerial parts of the individual tree, including tree stem, canopy, and trunk, alongside a highlighted focus on the root–plate movement amid the soil-root system. The analytical approaches associated with the time-space domain and the time-frequency domain are being introduced. In addition to the review of dynamic tree behaviors, an integrated tree monitoring framework based on geographic information systems (GIS) to detect and visualize the extent of tree displacement using smart sensing technology (SST) is introduced. The monitoring system aims to establish an early warning indicator system for monitoring the displacement angles of trees over the territory of Hong Kong’s urban landscape. This pilot study highlights the importance of the monitoring system at an operational scale to be applicable in the urban areas showcasing the practical use of the Internet of Things (IoT) with an in-depth understanding of the wind-load effect toward the urban trees in the tropical and subtropical cities.

Description: Albeit the remarkably high Ultraviolet B loads, high temperatures, and drought stress substantiate the need for efficient photoprotective strategies in Mediterranean high-mountain plants, these remain understudied. Considering the sensitivity of photosystems to extreme conditions, we evaluated an environmental gradient’s weight on the photoprotection of five high-mountain specialists from Central Spain. Diurnal and seasonal variations in chlorophyll, chlorophyll fluorescence, carotenoids, and xanthophylls in consecutive and climatically contrasting years were taken to evaluate the effect of the impending climate coarsening at the photosystem level. Our results revealed significant differences among species in the xanthophyll cycle functioning, acting either as a continuous photoprotective strategy enhancing photochemistry-steadiness; or prompted only to counteract the cumulative effects of atypically adverse conditions. The lutein cycle’s involvement is inferred from the high lutein content found in all species and elevations, acting as a sustained photoprotective strategy. These findings added to high de-epoxidation state (DEPS) and minor seasonal changes in the chlorophyll a/b ratio, infer the xanthophyll and Lutein cycles are crucial for upkeeping the photosystems’ optimal functioning in these plants heightening their photoprotective capacity during periods of more unfavorable conditions. Nevertheless, an atypically dry growing season’s detrimental effect infers the feasible surpassing of stress-thresholds and the precariousness of the communities’ functional diversity under climate change.

Description: The identification of urban functional areas is essential for urban planning and sustainable development. Spatial grids are the basic units for the implementation of urban plans and management by cities or development zones. The emergence of internet “big data” provides new ideas for the identification of urban functional areas. Based on point of interest (POI) data from Baidu Maps, the Xicheng District of Beijing was divided into grids with side lengths of 200, 500, and 1000 m in this study. The kernel density method was used to analyze the spatial structure of POI data. Two indicators, that is, the frequency density and category ratio, were then used to identify single- and mixed-functional areas. The results show that (1) commercial and financial areas are concentrated in the city center and multiple business centers have not developed; (2) scenic areas account for the largest proportion of single-functional areas in the Xicheng District of Beijing, followed by education and training, residence, and party and government organizations areas; and (3) the 200 × 200 m and 500 × 500 m grids are the most suitable for the identification of single- and mixed-functional areas, respectively.

Description: The prevalence of black bear (Ursus americanus) bark stripping in commercial redwood (Sequoia sempervirens (D. Don) Endl.) timber stands has been increasing in recent years. This stripping is a threat to commercial timber production because of the deleterious effects on redwood tree fitness. This study sought to unveil a remote sensing method to detect these damaged trees early and map their spatial patterns. By developing a timely monitoring method, forest timber companies can manipulate their timber harvesting routines to adapt to the consequences of the problem. We explored the utility of high spatial resolution UAV-collected hyperspectral imagery as a means for early detection of individual trees stripped by black bears. A hyperspectral sensor was used to capture ultra-high spatial and spectral information pertaining to redwood trees with no damage, those that have been recently attacked by bears, and those with old bear damage. This spectral information was assessed using the Jeffries-Matusita (JM) distance to determine regions along the electromagnetic spectrum that are useful for discerning these three-health classes. While we were able to distinguish healthy trees from trees with old damage, we were unable to distinguish healthy trees from recently damaged trees due to the inherent characteristics of redwood tree growth and the subtle spectral changes within individual tree crowns for the time period assessed. The results, however, showed that with further assessment, a time window may be identified that informs damage before trees completely lose value.

Description: Over the last decade, innovative computer technologies and the multiplication of geospatial data acquisition solutions have transformed the geographic information systems (GIS) landscape and opened up new opportunities to close the gap between GIS and the dynamics of geographic phenomena. There is a demand to further develop spatio-temporal conceptual models to comprehensively represent the nature of the evolution of geographic objects. The latter involves a set of considerations like those related to managing changes and object identities, modeling possible causal relations, and integrating multiple interpretations. While conventional literature generally presents these concepts separately and rarely approaches them from a holistic perspective, they are in fact interrelated. Therefore, we believe that the semantics of modeling would be improved by considering these concepts jointly. In this work, we propose to represent these interrelationships in the form of a hierarchical pyramidal framework and to further explore this set of concepts. The objective of this framework is to provide a guideline to orient the design of future generations of GIS data models, enabling them to achieve a better representation of available spatio-temporal data. In addition, this framework aims at providing keys for a new interpretation and classification of spatio-temporal conceptual models. This work can be beneficial for researchers, students, and developers interested in advanced spatio-temporal modeling.

Description: Current spatiotemporal data has facilitated movement studies to shift objectives from descriptive models to explanations of the underlying causes of movement. From both a practical and theoretical standpoint, progress in developing approaches for these explanations should be founded on a conceptual model. This paper presents such a model in which three conceptual levels of abstraction are proposed to frame an agent-based representation of movement decision-making processes: ‘attribute,’ ‘actor,’ and ‘autonomous agent’. These in combination with three temporal, spatial, and spatiotemporal general forms of observations distinguish nine (3 × 3) representation typologies of movement data within the agent framework. Thirdly, there are three levels of cognitive reasoning: ‘association,’ ‘intervention,’ and ‘counterfactual’. This makes for 27 possible types of operation embedded in a conceptual cube with the level of abstraction, type of observation, and degree of cognitive reasoning forming the three axes. The conceptual model is an arena where movement queries and the statement of relevant objectives takes place. An example implementation of a tightly constrained spatiotemporal scenario to ground the agent-structure was summarised. The platform has been well-defined so as to accommodate different tools and techniques to drive causal inference in computational movement analysis as an immediate future step.

Description: Identification of priority areas for conservation is crucial for the maintenance and protection of biodiversity, particularly in tropical forests where biodiversity continues to be lost at alarming rates. Surveys and research on umbrella species can provide efficient and effective approaches to identify potential areas for conservation at small geographical scales. Army ants of the genus Eciton are keystone species in neotropical forests due to their major role as top predators and due to the numerous vertebrate- and invertebrate associated species that depend upon their colonies for survival. These associates range from the iconic army ant-following birds to a wide range of arthropod groups, some of which have evolved intricate morphological, behavioural and/or chemical strategies to conceal their presence and integrate into the colony life. Furthermore, Eciton colonies require large forested areas that support a diverse leaf litter prey community and several field-based and genetic studies have demonstrated the negative consequences of forest fragmentation for the long-term maintenance of these colonies. Therefore, Eciton species will not only act as umbrella for their associates but also for many other species in neotropical forests, in particular for those that require a large extent of forest. This review summarises past and recent accounts of the main taxonomic groups found associated with Eciton colonies, as well research assessing the impact of forest fragmentation on this army ant, to encourage the adoption of Eciton army ants as umbrella species for the identification of priority areas for conservation and assessments of the effect of disturbance in neotropical forests.

Description: Cities are moving towards new mobility strategies to tackle smart cities’ challenges such as carbon emission reduction, urban transport multimodality and mitigation of pandemic hazards, emphasising on the implementation of shared modes, such as bike-sharing systems. This paper poses a research question and introduces a corresponding systematic literature review, focusing on machine learning techniques’ contributions applied to bike-sharing systems to improve cities’ mobility. The preferred reporting items for systematic reviews and meta-analyses (PRISMA) method was adopted to identify specific factors that influence bike-sharing systems, resulting in an analysis of 35 papers published between 2015 and 2019, creating an outline for future research. By means of systematic literature review and bibliometric analysis, machine learning algorithms were identified in two groups: classification and prediction.

Description: Global change has led to manifold changes of marine ecosystems and biodiversity world-wide. While it has been shown that certain jellyfish and comb jelly species have increased regionally, it remains to be investigated if this is a general trend or localized phenomenon. Especially for the economically important Baltic Sea, which is characterized by an extreme physical environmental gradient, this question has not been addressed to date. Here we present a detailed account of the gelatinous macro-zooplankton community including their physiological tolerance towards abiotic conditions and resulting distribution ranges in the Baltic. We show that the arrival and establishment of non-indigenous species has led to a rising importance of jellyfish and comb jellies in the Baltic. This accounts for the comb jelly Mnemiopsis leidyi, which was first observed in Northern Europe in 2005, as well as for the hydromedusae Blackfordia virginica, first sighted in 2014. Both species have been shown to attain high population densities with pronounced grazing impact in other invasive regions. Given the current and anticipated changes of the physical environment of the Baltic Sea, especially ongoing warming, amplification of their impact can be expected.

Description: Climate change leads to a variety of extreme weather conditions such as heat waves, unusual cold weather, and heavy rain, which always ends up with serious disasters. It could have a tremendous impact on a lot of industries in the world. The tourist industry, that plays a vital role in the global economy, has faced serious impacts from climate change in many tourist attractions, e.g., national parks, mountain areas, and beaches. The travel behavior of visitors has been changed under various climate change conditions. To understand the influence degrees of tourists on climate change factors, this study aimed to analyze whether there is difference in the influence of climate change on socio-demographic background, travel activities, travel intention, and the revisit intention attitude of tourists with different degrees of place attachment to Wuling National Forest Recreation Area. This study further investigated whether the climate change adaptation strategies offered by the park manager would have a positive influence on travel intention of tourists. The results of this study showed that except for heat waves, events related to climate change such as stronger typhoon, heavy rain, unusual cold weather condition, mud sliding, forest fire, and the appearance of mosquitos would have a negative influence on travel intention, especially for the tourists with a low degree of place attachment. In addition, if the park manager offers strategies to adapt to climate change conditions, these strategies would have a positive influence on travel intention.

Description: Landraces are valuable sources of genetic characteristics, which are of plant breeders’ interest to include in breeding programs for crop improvement. We assess the inter- and intra-genetic variability among 96 accessions representing three Hail tomato landrace using DNA-based marker sequence-related amplified polymorphism (SRAP). Seven SRAP primer combinations generated 55 alleles with a polymorphism of 100%, and an average of 7.86 polymorphic alleles per pair of primers. All primers showed an average of 0.68 polymorphic information content (PIC) value and discrimination power (DP) of 14.29. Principal coordinate analysis (PCoA) confirmed the clustering produced via the UPGMA similarity dendrogram allowed for the grouping of the 96 accessions according to its gene bank accession numbers and showed relatively good separation between landraces. A similarity value ranged from 0.04 to 1.0 among accessions of Hail 747, 0.05 to 1.0 in Hail 1072, and from 0.16 to 0.92 in Hail 548. These results showed the landraces harbor a wide range of genetic diversity at both inter and intra-variation levels. AMOVA showed that most of the genetic variation was because of differences within populations (87%). Tomato Hail landraces have well-differentiated genetic populations and admixtures, where Hail 747 formed their separate group, and both Hail 548 and Hail 1072 were admixed, and some accessions showed more diversity pattern. We have to take the SRAP technique’s effectiveness in the study of genetic variability among and within landraces into consideration in the tomato-breeding programs through marker-assessed selection.

Description: Information about tree biomass is important not only in the assessment of wood resources but also in the process of preparing forest management plans, as well as for estimating carbon stocks and their flow in forest ecosystems. The study aimed to develop empirical models for determining the dry mass of the aboveground parts of black locust trees and their components (stem, branches, and leaves). The research was carried out based on data collected in 13 stands (a total of 38 sample trees) of black locust located in western Poland. The model system was developed based on multivariate mixed-effect models using two approaches. In the first approach, biomass components and tree height were defined as dependent variables, while diameter at breast height was used as an independent variable. In the second approach, biomass components and diameter at breast height were dependent variables and tree height was defined as the independent variable. Both approaches enable the fixed-effect and cross-model random-effect prediction of aboveground dry biomass components of black locust. Cross-model random-effect prediction was obtained using additional measurements of two extreme trees, defined as trees characterized by the smallest and largest diameter at breast height in sample plot. This type of prediction is more precise (root mean square error for stem dry biomass for both approaches equals 77.603 and 188.139, respectively) than that of fixed-effects prediction (root mean square error for stem dry biomass for both approaches equals 238.716 and 206.933, respectively). The use of height as an independent variable increases the possibility of the practical application of the proposed solutions using remote data sources.

Description: In this work, the consequences of a local gorgonian coral mortality on the whole coralligenous assemblage were studied. A Before/After-Control/Impact sampling design was used: the structure of the coralligenous assemblage was compared before and after the gorgonian mortality event at the mortality site and two control sites. At the mortality site, a relevant decrease in alpha and beta diversity occurred, with a shift from a stratified assemblage characterized by gorgonians and other invertebrates to an assemblage dominated by algal turfs; conversely, neither significant variations of the structure nor decrease in biodiversity were observed at the control sites. The assemblage shift involved the main taxa in different times: in autumn 2018, a large proportion of the plexaurid coral Paramuricea clavata died, but no significant changes were observed in the structure of the remaining assemblage. Then, in autumn 2019, algal turfs increased significantly and, one year later, the abundance of the gorgonian Eunicella cavolini and bryozoans collapsed. Although the mechanisms of the assemblage shift following gorgonian loss will remain uncertain and a cause-effect relationship cannot be derived, results suggest the need for detecting signs of gorgonian forests stress in monitoring programs, which should be considered early indicators of their condition. in the coralligenous monitoring programs for detecting any sign of gorgonian forests stress which should be considered an early indicator of the assemblage condition.

Description: The genus Quercus (oak), family Fagaceae, comprises around 500 species, being one of the most important and dominant woody angiosperms in the Northern Hemisphere. Nowadays, it is threatened by environmental cues, which are either of biotic or abiotic origin. This causes tree decline, dieback, and deforestation, which can worsen in a climate change scenario. In the 21st century, biotechnology should take a pivotal role in facing this problem and proposing sustainable management and conservation strategies for forests. As a non-domesticated, long-lived species, the only plausible approach for tree breeding is exploiting the natural diversity present in this species and the selection of elite, more resilient genotypes, based on molecular markers. In this direction, it is important to investigate the molecular mechanisms of the tolerance or resistance to stresses, and the identification of genes, gene products, and metabolites related to this phenotype. This research is being performed by using classical biochemistry or the most recent omics (genomics, epigenomics, transcriptomics, proteomics, and metabolomics) approaches, which should be integrated with other physiological and morphological techniques in the Systems Biology direction. This review is focused on the current state-of-the-art of such approaches for describing and integrating the latest knowledge on biotic and abiotic stress responses in Quercus spp., with special reference to Quercus ilex, the system on which the authors have been working for the last 15 years. While biotic stress factors mainly include fungi and insects such as Phytophthora cinnamomi, Cerambyx welensii, and Operophtera brumata, abiotic stress factors include salinity, drought, waterlogging, soil pollutants, cold, heat, carbon dioxide, ozone, and ultraviolet radiation. The review is structured following the Central Dogma of Molecular Biology and the omic cascade, from DNA (genomics, epigenomics, and DNA-based markers) to metabolites (metabolomics), through mRNA (transcriptomics) and proteins (proteomics). An integrated view of the different approaches, challenges, and future directions is critically discussed.

Description: The work of Philibert Girault de Prangey, who was a draughtsman, pioneering photographer and an Islamic architecture scholar, has been the subject of recent exhibitions in his hometown (Langres, 2019), at the Metropolitan Museum (New York, 2019) and at the Musée d’Orsay (Paris, 2020). After visiting Andalusia between 1832 and 1833, Prangey completed the publication “Monuments arabes et moresques de Cordoue, Seville et Grenada” in 1839, based on his own drawings and measurements. For the first time, this research analyses his interior perspectives of the Mosque-Cathedral of Cordoba (Spain). The novel methodology is based on its comparison with a digital model derived from the point cloud captured by a 3D laser scanner. After locating the different viewpoints, the geometric precision and the elaboration process are analysed, taking into account historic images by various authors, other details published by Prangey and the architectural transformations of the building. In this way, the veracity and documentary interest of some beautiful perspectives of a monument inscribed on the World Heritage List by UNESCO is valued.

Description: In this paper, we propose a decentralized semantic reasoning approach for modeling vague spatial objects from sensor network data describing vague shape phenomena, such as forest fire, air pollution, traffic noise, etc. This is a challenging problem as it necessitates appropriate aggregation of sensor data and their update with respect to the evolution of the state of the phenomena to be represented. Sensor data are generally poorly provided in terms of semantic information. Hence, the proposed approach starts with building a knowledge base integrating sensor and domain ontologies and then uses fuzzy rules to extract three-valued spatial qualitative information expressing the relative position of each sensor with respect to the monitored phenomenon’s extent. The observed phenomena are modeled using a fuzzy-crisp type spatial object made of a kernel and a conjecture part, which is a more realistic spatial representation for such vague shape environmental phenomena. The second step of our approach uses decentralized computing techniques to infer boundary detection and vertices for the kernel and conjecture parts of spatial objects using fuzzy IF-THEN rules. Finally, we present a case study for urban noise pollution monitoring by a sensor network, which is implemented in Netlogo to illustrate the validity of the proposed approach.

Description: Wildfires and pests are natural disturbance agents in many forest ecosystems that often contribute to ecological succession, nutrient cycling, and forest species composition. Mongolian pine (Pinus sylvestris var. mongolica) is a coniferous species that plays an important role as an ecological barrier, and is widely spread in northern China. Its wood is loose; its branches, leaves, and cones contain a high level of resin and volatile oils that make the species highly flammable and the stands dominated by the species are very vulnerable to fire. Recently, resinosis on boles of Pinus sylvestris became an epidemic in China. To explore the potential effects of pests on fire, we compared the flammability of Mongolian pine barks with or without resinosis on boles using a cone calorimeter and several combustion analyses. We found that the barks from boles with resinosis had a greater oil content than the healthy trees. The study also indicated that the ignition times of the barks from boles with and without resinosis were 6.00 s (±1.73) and 22.67 s (±1.15), respectively, and that the heat release rate curves were parabolic, with peaks 225.19 and 75.27 kW/m2, respectively, for the two bark types. Additionally, because resinosis was on the low- to mid-bole of infested trees, the barks from boles with resinosis tended to be ignited much easier than those without resinosis. This clearly evidenced that pests could affect fire severity and behavior by increasing forest flammability. More information about the role that pests play in the different forest cover types is needed to increase our understanding of fire danger and to develop sound forest management policies.

Description: Organogenesis and somatic embryogenesis have been widely applied as the two main regeneration pathways in plant tissue cultures. However, recalcitrance is still the main restriction in the clonal propagation of many woody species, especially in conifers. They undergo a “phase change” that leads to significant loss of vegetative propagation capacity, reducing the aptitude of tissues and organs to be regenerated in vitro beyond this point. In line with this, the in vitro regeneration of mature conifer trees has been a long-cherished goal in many laboratories worldwide. Based on previous works in Pinus species regeneration from adult trees, we now present data about the culture of apical shoot buds in an attempt to induce organogenesis and somatic embryogenesis to clone mature trees of Aleppo pine (Pinus halepensis). Reinvigorated axillary shoots were submitted to conditions usually applied to induce somatic embryogenesis through the manipulation of culture media, including the use of auxins such as 2,4-Dichlorophenoxyacetic acid and 1-Naphthaleneacetic acid, cytokinins (6-benzyladenine and kinetin), and phytosulfokine (50, 100, and 200 nM). Although somatic embryos could not be obtained, an embryogenic-like tissue was produced, followed by the emergence of actively proliferating non-embryogenic calli. Variations in the consistence, texture, and color of non-embryogenic calli were observed; especially those arising in the media containing phytosulfokine. Reinvigorated shoots, induced by 22 or 44 µM 6-benzyladenine, were obtained through organogenesis and acclimatized, and phenotypically normal plants were obtained.

Description: This paper provides an updating of information of a selected number of major phytoplasma diseases of forest trees, with a focus on the associated phytoplasma taxa. Phytoplasma diseases of forest trees have been less extensively studied than those affecting fruit trees. Research on the role of phytoplasmas as the cause of diseases of forest trees has only in the last few years been intensified, after sensitive and specific detection methods greatly based on PCR technology became available. Various phytoplasma taxa have been identified in naturally infected elm, ash, conifer, sandal, and eucalyptus trees, whereas only one phytoplasma taxon has been recorded in naturally infected alder trees. However, for almost all of the reviewed diseases, there is still sparse information about insect vectors, plant host range, strain virulence, pathogenicity, and host tolerance and resistance. Knowledge of these aspects is the basis for appropriate disease management. In particular, further research is required to clarify the role of phytoplasmas in asymptomatic trees. In addition, the etiological role of various “non-specific” phytoplasma taxa, which have been recorded in forest trees, while no data from pathological studies are available, needs to be further investigated.

Description: A few studies in young mixedwood stands demonstrate that precommercial thinning of aspen at early ages can improve the growth of spruce and increase stand resilience to drought. However, information on tree and stand responses to thinning in older mixedwood stands is lacking. To address this need, a study was initiated in 2008 in Alberta, Canada in 14 boreal mixedwood stands (seven each at ages 17 and 22). This study investigated growth responses following thinning of aspen to five densities (0, 1000, 2500, 5000 stems ha−1 and unthinned (control)). Measurements were collected in the year of establishment, and three and eight years later. Mortality of aspen in the unthinned plots was greater than in the thinned plots which were not significantly different amongst each other. Eight years following treatment, aspen diameter was positively influenced by thinning, while there was no effect on aspen height. The density of aspen had no significant effect on the survival of planted spruce. Spruce height and diameter growth increased with both aspen thinning intensity and time since treatment. Differentiation among treatments in spruce diameter growth was evident three years from treatment, while differentiation in height was not significant until eight years following treatment. Yield projections using two growth models (Mixedwood Growth Model (MGM) and Growth and Yield Projection System (GYPSY)) were initialized using data from the year eight re-measurements. Results indicate that heavy precommercial aspen thinning (to ~1000 aspen crop trees ha−1) can result in an increase in conifer merchantable volume without reducing aspen volume at the time of harvest. However, light to moderate thinning (to ~2500 aspen stems ha−1 or higher), is unlikely to result in gains in either deciduous or conifer merchantable harvest volume over those of unthinned stands.

Description: The spatial heterogeneity of plant diversity at the neighborhood scale has less been understood, although it is very important for the planning and management of neighborhood landscape. In this case study of Beijing, we conducted intensive investigations of the plant diversity in different neighborhoods along a rural–urban gradient. The results showed that the mean numbers of plant species per neighborhood were 30.5 for trees, 18.8 for shrubs, and 31.9 for herbs, respectively. There were significant logarithmic relationships between the numbers of species and patch area, indicating that larger patches within neighborhoods could harbor more plant species. Hierarchical linear modeling showed that the variations in plant diversity within neighborhoods were higher than those between neighborhoods. The number of species increased logistically with both the number of patches within neighborhoods and the number of neighborhoods, suggesting that it is important to sample a sufficient number of patches within neighborhoods, as well as a sufficient number of neighborhoods in order to sample 90% of the plant species during the investigation of plant diversity in urban neighborhoods. So the hierarchical design of sampling should be recommended for investigating plant diversity in urban areas.

Description: Motor-manual operations are commonly implemented in the traditional and short rotation forestry. Deep knowledge of their performance is needed for various strategic, tactical and operational decisions that rely on large amounts of data. To overcome the limitations of traditional analytical methods, Artificial Intelligence (AI) has been lately used to deal with various types of signals and problems to be solved. However, the reliability of AI models depends largely on the quality of the signals and on the sensing modalities used. Multimodal sensing was found to be suitable in developing AI models able to learn time and location-related data dependencies. For many reasons, such as the uncertainty of preserving the sensing location and the inter- and intra-variability of operational conditions and work behavior, the approach is particularly useful for monitoring motor-manual operations. The main aim of this study was to check if the use of acceleration data sensed at two locations on a brush cutter could provide a robust AI model characterized by invariance to data sensing location. As such, a Multi-Layer Perceptron (MLP) with backpropagation was developed and used to learn and classify operational events from bimodally-collected acceleration data. The data needed for training and testing was collected in the central part of Romania. Data collection modalities were treated by fusion in the training dataset, then four single-modality testing datasets were used to check the performance of the model on a binary classification problem. Fine tuning of the regularization parameters (α term) has led to acceptable testing and generalization errors of the model measured as the binary cross-entropy (log loss). Irrespective of the hyperparameters’ tunning strategy, the classification accuracy (CA) was found to be very high, in many cases approaching 100%. However, the best models were those characterized by α set at 0.0001 and 0.1, for which the CA in the test datasets ranged from 99.1% to 99.9% and from 99.5% to 99.9%, respectively. Hence, data fusion in the training set was found to be a good strategy to build a robust model, able to deal with data collected by single modalities. As such, the developed MLP model not only removes the problem of sensor placement in such applications, but also automatically classifies the events in the time domain, enabling the integration of data collection, handling and analysis in a simple less resource-demanding workflow, and making it a feasible alternative to the traditional approach to the problem.

Description: Background and Objectives—Coexisting tree and shrub species will have to withstand more arid conditions as temperatures keep rising in the Mediterranean Basin. However, we still lack reliable assessments on how climate and drought affect the radial growth of tree and shrub species at intra- and interannual time scales under semi-arid Mediterranean conditions. Materials and Methods—We investigated the growth responses to climate of four co-occurring gymnosperms inhabiting semi-arid Mediterranean sites in northeastern Spain: two tree species (Aleppo pine, Pinus halepensis Mill.; Spanish juniper, Juniperus thurifera L.) and two shrubs (Phoenicean juniper, Juniperus phoenicea L.; Ephedra nebrodensis Tineo ex Guss.). First, we quantified the intra-annual radial-growth rates of the four species by periodically sampling wood samples during one growing season. Second, we quantified the climate–growth relationships at an interannual scale at two sites with different soil water availability by using dendrochronology. Third, we simulated growth responses to temperature and soil moisture using the forward, process-based Vaganov‒Shashkin (VS-Lite) growth model to disentangle the main climatic drivers of growth. Results—The growth of all species peaked in spring to early summer (May–June). The pine and junipers grew after the dry summer, i.e., they showed a bimodal growth pattern. Prior wet winter conditions leading to high soil moisture before cambium reactivation in spring enhanced the growth of P. halepensis at dry sites, whereas the growth of both junipers and Ephedra depended more on high spring–summer soil moisture. The VS-Lite model identified these different influences of soil moisture on growth in tree and shrub species. Conclusions—Our approach (i) revealed contrasting growth dynamics of co-existing tree and shrub species under semi-arid Mediterranean conditions and (ii) provided novel insights on different responses as a function of growth habits in similar drought-prone regions.

Description: Research highlights: Funding forest management with subsidies from carbon offsetters is a well-documented mechanism in tropical regions. This article provides complementary insights into the use of voluntary offset contracts in temperate forests. Background and objectives: The mitigation of greenhouse emissions has become a major global issue, leading to changes in forest management to increase the capacity of forests to store carbon. This can lead to conflicts of use with other forest ecosystem services such as timber production or biodiversity conservation. Our main goal is to describe collective actions to fund carbon-oriented forestry with subsidies from carbon offsetters and to analyze how their governance and functioning prevent conflicts pertaining to multi-functionality. Materials and methods: We assembled an interdisciplinary research team comprising two ecologists, a social scientist, and an economist. Drawing on a conceptual framework of ecosystem services, social interdependencies, and collective action, we based our qualitative analysis on semi-structured interviews from two French case studies. Results: Carbon-oriented intermediary forest organizations offer offset contracts to private firms and public bodies. Communication is geared toward the mitigation outcomes of the contracts as well as their beneficial side effects in providing the ecosystem services of interest to the offsetters. Subsidies then act as a financial lever to fund carbon-oriented forestry operations. Scientific committees and reporting methodologies serve as environmental, social, and economic safeguards. Conclusions: These new intermediary forest organizations use efficient forest operations and evaluation methodologies to improve forest carbon storage. Their main innovation lies in their collective governance rooted in regional forest social-ecological systems. Their consideration of multi-functionality and socioeconomic issues can be seen as an obstacle to rapid development, but they ensure sustainability and avoid conflicts between producers and beneficiaries of forest ecosystem services. Attention must be paid to interactions with broader spatial and temporal carbon policies.

Description: Forestry harvesting represents an important economic activity around the world. Habitat degradation due to forest harvesting contributes to biodiversity loss; therefore, it is necessary to implement logging management aimed at reducing its impact. Forest management by reduce-impact logging (RIL) involves cutting trees following regulations focused on diminishing the impact on biodiversity by following harvesting plans based on forestry inventories and participation of trained workers. In Mexico, RIL is applied mainly in temperate habitats and its effectiveness has been assessed based on vascular plants. In this study, we analyzed the diversity and community structure of terrestrial and epiphytic mosses in managed (sites number = 3) and conserved (sites number = 3) sites in the temperate forest of Sierra Juárez, Oaxaca, Mexico. Likewise, we evaluated the potential function of mosses as indicators of habitat degradation. Environmental variables were also quantified at local (canopy coverage, altitude, daily temperature, and light) and regional (total annual rainfall, orientation, and slope) scales to evaluate potential relationships with the community and species diversity. We documented 70 mosses species with a diversity (alfa, beta) and community structure similar between managed and conserved sites. For terrestrial mosses, we found marginal differences in their communities, likely related to species coverture variation in managed sites. The diversity and community structure epiphytic mosses were not statistically different in managed and conserved sites. Only the daily variation in light intensity was positively related to the variation of alpha diversity of epiphytic mosses. The species Dicranum sumichrastii Duby and Leptodontium viticulosoides (P. Beauv.) Wijk & Margad. can be considered as ecological indicators for conserved and managed sites, respectively, likely due to their relationship with light and humidity conditions. Our results suggest that that forest management by RIL could be considered as a promising tool to balance timber production and moss diversity.

Description: The intensity and frequency of drought have increased considerably during the last decades in southeastern Europe, and projected scenarios suggest that southern and central Europe will be affected by more drought events by the end of the 21st century. In this context, assessing the intraspecific genetic variation of forest tree species and identifying populations expected to be best adapted to future climate conditions is essential for increasing forest productivity and adaptability. Using a tree-ring database from 60 populations of 38-year-old silver fir (Abies alba) in five trial sites established across Romania, we studied the variation of growth and wood characteristics, provenance-specific response to drought, and climate-growth relationships during the period 1997–2018. The drought response of provenances was determined by four drought parameters: resistance, recovery, resilience, and relative resilience. Based on the standardized precipitation index, ten years with extreme and severe drought were identified for all trial sites. Considerable differences in radial growth, wood characteristics, and drought response parameters among silver fir provenances have been found. The provenances’ ranking by resistance, recovery, and resilience revealed that a number of provenances from Bulgaria, Italy, Romania, and Czech Republic placed in the top ranks in almost all sites. Additionally, there are provenances that combine high productivity and drought tolerance. The correlations between drought parameters and wood characters are positive, the most significant correlations being obtained between radial growth and resilience. Correlations between drought parameters and wood density were non-significant, indicating that wood density cannot be used as indicator of drought sensitivity. The negative correlations between radial growth and temperature during the growing season and the positive correlations with precipitation suggest that warming and water deficit could have a negative impact on silver fir growth in climatic marginal sites. Silvicultural practices and adaptive management should rely on selection and planting of forest reproductive material with high drought resilience in current and future reforestation programs.

Description: Positioning information has become one of the most important information for processing and displaying on smart mobile devices. In this paper, we propose a visual positioning method using RGB-D image on smart mobile devices. Firstly, the pose of each image in the training set is calculated through feature extraction and description, image registration, and pose map optimization. Then, in the image retrieval stage, the training set and the query set are clustered to generate the vector of local aggregated descriptors (VLAD) description vector. In order to overcome the problem that the description vector loses the image color information and improve the retrieval accuracy under different lighting conditions, the opponent color information and depth information are added to the description vector for retrieval. Finally, using the point cloud corresponding to the retrieval result image and its pose, the pose of the retrieved image is calculated by perspective-n-point (PnP) method. The results of indoor scene positioning under different illumination conditions show that the proposed method not only improves the positioning accuracy compared with the original VLAD and ORB-SLAM2, but also has high computational efficiency.

Description: The quality of human life is linked to the exploitation of mining resources. The Exploitability Index (EI) assesses the actual possibilities to enable a mine according to several factors. The environment is one of the most constraining ones, but its analysis is made in a shallow way. This research is focused on its determination, according to a new preliminary methodology that sets the main components of the environmental impact related to the development of an exploitation of industrial minerals and its weighting according to the Analytic Hierarchy Process (AHP). It is applied to the case of the ophitic outcrops in Cantabria (Spain). Twelve components are proposed and weighted with the AHP and an algorithm that allows for assigning a normalized value for the environmental factor to each deposit. Geographic Information Systems (GISs) are applied, allowing us to map a large number of components of the environmental factors. This provides a much more accurate estimation of the environmental factor, with respect to reality, and improves the traditional methodology in a substantial way. It can be established as a methodology for mining spaces planning, but it is suitable for other contexts, and it raises developing the environmental analysis before selecting the outcrop to be exploited.

Description: The expansion of roads has threatened wildlife populations by driving casualties due to vehicle collisions. However, the ecological drivers of wildlife roadkills are not yet fully explored. We investigated the strength of landscape features and ecomorphological traits in determining spatial patterns of bat roadkills in Taiwan. In total, 661 roadkills that belonged to 20 bat species were acquired by citizen scientists between 2011 and 2019. The number and species richness of victim bats declined with increasing elevations with varying species compositions. Elevation and artificial light had significantly negative effects on the occurrence of roadkill, whereas protected area and its interaction with elevation had positive effects. Ordination analyses showed that roadkills were driven by different ecomorphological traits and landscape features. At low elevations, road casualties were associated with an aerial hawking hunting strategy. At higher elevations, roadkills were associated with higher elevational distribution. Roadkills of non-cave bats were associated with brighter environments, suggesting that bats might be exposed to higher risk when hunting insects near artificial light. Our findings suggest that management agencies shall consider both species traits and landscape features when planning impact assessments and mitigation practices of roadkills for bats and probably other wildlife, particularly when long environmental gradients are covered.

Description: Providing long-term data about the evolution of railway networks in Europe may help us understand how European Union (EU) member states behave in the long-term, and how they can comply with present EU recommendations. This paper proposes a methodology for collecting data about railway stations, at the maximal extent of the French railway network, a century ago.The expected outcome is a geocoded dataset of French railway stations (gares), which: (a) links gares to each other, (b) links gares with French communes, the basic administrative level for statistical information. Present stations are well documented in public data, but thousands of past stations are sparsely recorded, not geocoded, and often ignored, except in volunteer geographic information (VGI), either collaboratively through Wikipedia or individually. VGI is very valuable in keeping track of that heritage, and remote sensing, including aerial photography is often the last chance to obtain precise locations. The approach is a series of steps: (1) meta-analysis of the public datasets, (2) three-steps fusion: measure-decision-combination, between public datasets, (3) computer-assisted geocoding for ‘gares’ where fusion fails, (4) integration of additional gares gathered from VGI, (5) automated quality control, indicating where quality is questionable. These five families of methods, form a comprehensive computer-assisted reconstruction process (CARP), which constitutes the core of this paper. The outcome is a reliable dataset—in geojson format under open license—encompassing (by January 2021) more than 10,700 items linked to about 7500 of the 35,500 communes of France: that is 60% more than recorded before. This work demonstrates: (a) it is possible to reconstruct transport data from the past, at a national scale; (b) the value of remote sensing and of VGI is considerable in completing public sources from an historical perspective; (c) data quality can be monitored all along the process and (d) the geocoded outcome is ready for a large variety of further studies with statistical data (demography, density, space coverage, CO2 simulation, environmental policies, etc.).

Description: In 2015, 193 countries declared their commitment to “leave no one behind” in pursuit of 17 Sustainable Development Goals (SDGs). However, the world’s refugees have been routinely excluded from national censuses and representative surveys, and, as a result, have broadly been overlooked in SDG evaluations. In this study, we examine the potential of OpenStreetMap (OSM) data for monitoring SDG progress in refugee settlements. We collected all available OSM data in 28 refugee and 26 nearby non-refugee settlements in the major refugee-hosting country of Uganda. We created a novel SDG-OSM data model, measured the spatial and temporal coverages of SDG-relevant OSM data across refugee settlements, and compared these results to non-refugee settlements. We found 11 different SDGs represented across 92% (21,950) of OSM data in refugee settlements, compared to 78% (1919 nodes) in non-refugee settlements. However, most data were created three years after refugee arrival, and 81% of OSM data in refugee settlements were never edited, both of which limit the potential for long-term monitoring of SDG progress. In light of our findings, we offer suggestions for improving OSM-driven SDG monitoring in refugee settlements that have relevance for development and humanitarian practitioners and research communities alike.

Description: Acacia spp. are exotic tree species that have been widely planted on man-made slopes in Hong Kong since the 1960s. However, as they become mature and senescent, they may become a concern and cause various problems, including soil constraints for plant growth, decreasing provision of intended ecosystem services, declining syndromes, arrested succession, and high risk of failure. In this perspective paper, we present and discuss these problems using practical examples of Acacia-dominated urban forests on man-made roadside slopes in Hong Kong, based on a cross-disciplinary survey and a literature review. To conclude, we suggest that selective cutting, specific silvicultural operations of Acacia plantations, and the management of plantation edge and soils can be exercised, along with the planting of native species, to potentially alleviate these problems associated with mature Acacia plantations, by promoting the establishment of native forests, enhancing biodiversity, expediting succession, and providing better ecosystem services.

Description: Vegetation cover plays a key role in terrestrial ecosystem; therefore, it is important for researchers to investigate the variation and influencing factors of vegetation cover. China has experienced a large-scale vegetation cover change in recent years. We summarized the literature of vegetation cover change and revealed how large-scale anthropogenic activities influence vegetation cover change in China. Afforestation and intensification of cropland played a key role in large-scale greening. Urbanization showed a “U” shape to influence vegetation cover change. Mining and reclamation, land abandonment and land consolidation, and regional natural protection all had a unique influence on the change of vegetation cover. Indeed, the large-scale vegetation cover change was caused by interaction of anthropogenic factors and part human-driven climate change. Anthropogenic factors influenced climate change to indirectly alter the condition of plant growth. Interaction between climate change and human activities influence on vegetation cover still needs to be further investigated in the future.

Description: The environmental impact of deposit development can be indirect and can cause combined geochemical processes in ecosystems. These must be taken into consideration under environmental forecasting and environmental risk assessment. Soil degradation in the Taiga Forest is considered, within the area of Verkhnekamskoye potash deposit (Russia), as an example of such environmental transformation. Here, the mechanism and characteristics of the anthropogenic salinisation of alluvial soils under potash deposit development are newly described. It was found that there is a strong anthropogenic impact of the potash industry on valley soils where the contaminated Na-Cl groundwater discharges or is close to the surface. The valley soils are characterised by high salinity, and the sum of toxic salts in soils has reached 26%. Alluvial gley humic clay chloride saline soil (Gleyic Fluvisols (Salic, Loamic, Technic)) and secondary solonchak on alluvial humic clay soil sulphate-chloride gypsum-containing surface-gleyed (Chloridic Gleyic Fluvic Solonchak (Hypersalic, Loamic, Technic)) were formed in hydromorphic conditions. Morphological, physicochemical and mineralogical analyses were carried out. Under hydromorphic conditions, Chloridic Gleyic Fluvic Solonchak (Hypersalic, Loamic) was described to show a hydrotroillite layer and reddish-yellow iron-rich precipitates on its surface. The top soil horizon has the highest content of iron minerals (up to 84.9%) and Fe-bearing plant residues (up to 20%). Additionally, the spongy and gel-like organic materials, as well as the siliceous remains of diatoms, are enriched in Ca, Fe, Cl, K, Na, S and P. The lower soil horizon consists of black gel-like phases and hydrogen sulphide settings with a high content of plant residues. The insoluble part of the samples contains up to 84% hydrogoethite. The sources of iron in soils and bottom sediments include the iron-enriched Sheshma sediments speckled rocks, slurry material, halite wastes and soil minerals of alluvial gley soils.

Description: In this work, we present a novel approach to understand the quality of public transit system in resource constrained regions using user-generated contents. With growing urban population, it is getting difficult to manage travel demand in an effective way. This problem is more prevalent in developing cities due to lack of budget and proper surveillance system. Due to resource constraints, developing cities have limited infrastructure to monitor transport services. To improve the quality and patronage of public transit system, authorities often use manual travel surveys. But manual surveys often suffer from quality issues. For example, respondents may not provide all the detailed travel information in a manual travel survey. The survey may have sampling bias. Due to close-ended design (specific questions in the questionnaire), lots of relevant information may not be captured in a manual survey process. To address these issues, we investigated if user-generated contents, for example, Twitter data, can be used to understand service quality in Greater Mumbai in India, which can complement existing manual survey process. To do this, we assumed that, if a tweet is relevant to public transport system and contains negative sentiment, then that tweet expresses user’s dissatisfaction towards the public transport service. Since most of the tweets do not have any explicit geolocation, we also presented a model that does not only extract users’ dissatisfaction towards public transit system but also retrieves the spatial context of dissatisfaction and the potential causes that affect the service quality. It is observed that a Random Forest-based model outperforms other machine learning models, while yielding 0.97 precision and 0.88 F1-score.

Description: One of the most important challenges of volunteered geographic information (VGI) is the quality assessment. Existing methods of VGI quality assessment, either assess the quality by comparing a reference map with the VGI map or deriving the quality from the metadata. The first approach does not work for a real-time scenario and the latter delivers approximate values of the quality. Internet of Things (IoT) networks provide real-time observations for environment monitoring. Moreover, they publish more precise information than VGI. This paper introduces a method to assess the quality of VGI in real-time using IoT observations. The proposed method filters sensor observation outliers in the first step. Then it matches sensors and volunteers’ relationships in terms of location, time, and measurement type similarity using a hypergraph model. Then the quality of matched data is assessed by calculating positional and attribute accuracy. To evaluate the method, VGI data of the water level and quality in Tarashk–Bakhtegan–Maharlou water basin is studied. A VGI quality map of the data is assessed by a referenced authoritative map. The output of this step is a VGI quality map, which was used as a reference to check the proposed method quality. Then this reference VGI quality map and the proposed method VGI quality map are compared to assess positional and attribute accuracy. Results demonstrated that 76% of the method results have less than 20 m positional error (i.e., difference with the reference VGI quality map). Additionally, more than 92% of the proposed method VGI data have higher than 90% attribute accuracy in terms of similarity with the reference VGI quality map. These findings support the notion that the proposed method can be used to assess VGI quality in real-time.

Description: Understanding the patterns of biodiversity and their relationship with environmental gradients is a key issue in ecological research and conservation in forests [...]

Description: The coronavirus disease 2019 (COVID-19) pandemic has had tremendous and extensive impacts on the people’s daily activities. In Chicago, the numbers of crime fell considerably. This work aims to investigate the impacts that COVID-19 has had on the spatial and temporal patterns of crime in Chicago through spatial and temporal crime analyses approaches. The Seasonal-Trend decomposition procedure based on Loess (STL) was used to identify the temporal trends of different crimes, detect the outliers of crime events, and examine the periodic variations of crime distributions. The results showed a certain phase pattern in the trend components of assault, battery, fraud, and theft. The largest outlier occurred on 31 May 2020 in the remainder components of burglary, criminal damage, and robbery. The spatial point pattern test (SPPT) was used to detect the similarity between the spatial distribution patterns of crime in 2020 and those in 2019, 2018, 2017, and 2016, and to analyze the local changes in crime on a micro scale. It was found that the distributions of crime significantly changed in 2020 and local changes in theft, battery, burglary, and fraud displayed an aggregative cluster downtown. The results all claim that spatial and temporal patterns of crime changed significantly affected by COVID-19 in Chicago, and they offer constructive suggestions for local police departments or authorities to allocate their available resources in response to crime.

Description: The bus stop layout and route deployment may influence the efficiency of bus services. Evaluating the supply of bus service requires the consideration of demand from various urban activities, such as residential and job-related activities. Although various evaluation methods have been explored from different perspectives, it remains a challenging issue. This study proposes a spatial statistical approach by comparing the density of the potential demand and supply of bus services at bus stops. The potential demand takes jobs-housing locations into account, and the supply of bus services considers bus stops and their associated total number of daily bus arrivals. The kernel density estimation (KDE) and spatial autocorrelation analyses are employed to investigate the coupling relationship between the demand and supply densities at global and local scales. A coupling degree index (CDI) is constructed to standardize the measurement of demand-supply balance. A case study in Wuhan, China demonstrated that: (1) the spatial distribution of bus stops is reasonable at global level, (2) Seriously unbalanced locations for bus services have been detected at several stops. Related adjustments that can improve these defects are highly recommended.

Description: Small object detection in very-high-resolution (VHR) optical remote sensing images is a fundamental but challenaging problem due to the latent complexities. To tackle this problem, the MdrlEcf model is proposed by modifying deep reinforcement learning (DRL) and extracting the efficient convolution feature. Firstly, an efficient attention network is constructed by introducing the local attention into the convolutional neural network. Combining the shallow low-level features with rich detail descriptions and high-level features with more semantic meanings effectively, efficient convolution features can be obtained. By this, the attention network can effectively enhance the ability to extract small target features and suppressing useless features. Secondly, the efficient feature map is sent to the region proposal network constructed by modified DRL. Using the modified reward function, this model can accumulate more rewards to conduct the search process, and potentially generate effective subsequent proposals and classification scores. It also can increase the effectiveness of object locations and classifications for small targets. Quantitative and qualitative experiments are conducted to verify the detection performance of different models. The results show that the proposed MdrlEcf can effectively and accurately locate and identify related small objects.

Description: The natural ecological lands, such as forest land, grassland, wetland, etc., constitute the most important factor for maintaining and preserving the earth’s ecosystem, which must be well concerned in the regional function-oriented planning for the sustainability of human economic development. We analyzed and evaluated the change of natural ecological land in the function-oriented planning regions where we applied the major function-oriented zones introduced as a new concept in China. Using the land-use data from 2009 to 2018 that were produced by the National Land Use Survey, we re-classified natural ecological land types into the forest, grassland, wetland, and bare land, and then addressed the changes of natural ecological land types from 2009 to 2018 in the major function-oriented zones. As a result, the area of natural ecological lands generally tended to decrease from 2009 to 2018, while the decreasing trend of natural ecological land areas was controlled after 2015 with the implementation of governmental policies for environment protection and eco-logical projects. Especially, the decrease of forest land area significantly tended to be zero in 2018 in optimal development zones. The decreased areas of natural ecological lands were mostly converted from artificial land from 2008 to 2019. On the other side, the forest lands mostly changed from cropland and grassland in key development zones, agricultural production zones, and key ecological function zones, due to the fact that grassland conversed in afforestation during this period. The evaluation of natural ecological land changes, which could be implemented by using the annual updates of national land-use data in China, is significant to support the government’s spatial regulation design, to reshape the planned regions, and make policies for environmental restoration and protection management.

Description: The use of foster parents has great potential to help the recovery of highly endangered bird species. However, few studies have shown how to successfully use these techniques in wild populations. Scarlet Macaws (Ara macao macao) in Perú hatch 2–4 chicks per nest but about 24% of all chicks die of starvation and on average just 1.4 of them fledge per successful nest. In this study we develop and test new techniques to increase survival of wild Scarlet Macaw chicks by reducing chick starvation. We hypothesized that using foster parents would increase the survival of chicks at risk of starvation and increase overall reproductive success. Our results show that all relocated macaw chicks were successfully accepted by their foster parents (n = 28 chicks over 3 consecutive breeding seasons) and 89% of the relocated chicks fledged. Overall, we increased fledging success per available nest from 17% (2000 to 2016 average) to 25% (2017 to 2019) and decreased chick death by starvation from 19% to 4%. These findings show that the macaw foster parents technique and post relocation supplemental feeding provide a promising management tool to aid wild parrot population recovery in areas with low reproductive success.

Description: Dromornithids are an extinct group of large flightless birds from the Cenozoic of Australia. Their record extends from the Eocene to the late Pleistocene. Four genera and eight species are currently recognised, with diversity highest in the Miocene. Dromornithids were once considered ratites, but since the discovery of cranial elements, phylogenetic analyses have placed them near the base of the anseriforms or, most recently, resolved them as stem galliforms. In this study, we use morphometric methods to comprehensively describe dromornithid endocranial morphology for the first time, comparing Ilbandornis woodburnei and three species of Dromornis to one another and to four species of extant basal galloanseres. We reveal that major endocranial reconfiguration was associated with cranial foreshortening in a temporal series along the Dromornis lineage. Five key differences are evident between the brain morphology of Ilbandornis and Dromornis, relating to the medial wulst, the ventral eminence of the caudoventral telencephalon, and morphology of the metencephalon (cerebellum + pons). Additionally, dromornithid brains display distinctive dorsal (rostral position of the wulst), and ventral morphology (form of the maxillomandibular [V2+V3], glossopharyngeal [IX], and vagus [X] cranial nerves), supporting hypotheses that dromornithids are more closely related to basal galliforms than anseriforms. Functional interpretations suggest that dromornithids were specialised herbivores that likely possessed well-developed stereoscopic depth perception, were diurnal and targeted a soft browse trophic niche.

Description: Bioindicators assess the mangroves ecological state according to the types of pressures but they differ with the ecosystem’s specificities. We investigated benthic meiofauna diversity and structure within the low human-impacted mangroves in French Guiana (South America) in response to sediment variables with various distances to the main city. Contaminant’s concentrations differed among the stations, but they remained below toxicity guidelines. Meiofauna structure (Foraminifera, Kinorhyncha, Nematoda) however varied accordingly. Nematode’s identification brought details on the sediment’s quality. The opportunistic genus Paraethmolaimus (Jensen, 1994) strongly correlated to the higher concentrations of Hg, Pb. Anoxic sediments were marked by organic enrichment in pesticides, PCB, and mangrove litter products and dominance of two tolerant genus, Terschellingia (de Man, 1888) and Spirinia (Gerlach, 1963). In each of these two stations, we found many Desmodora individuals (de Man, 1889) with the presence of epibionts highlighting the nematodes decreased fitness and defenses. Oxic sediments without contaminants were distinguished by the sensitive genera Pseudocella (Filipjev, 1927) and a higher diversity of trophic groups. Our results suggested a nematodes sensitivity to low contaminants concentrations. Further investigations at different spatio-temporal scales and levels of deterioration, would be necessary to use of this group as bioindicator of the mangroves’ ecological status.

Description: Studies of biomass and carbon dynamics and community composition change after forest wind disturbance have predominantly examined trends after low and intermediate severity events, while studies after very severe wind disturbance have been few. This study documents trends in aboveground biomass and carbon across 10 years of forest recovery after severe wind disturbance. In July 1989, a tornado struck mature Tsugacanadensis-Pinusstrobus forest in northwest Connecticut, USA, causing damage across roughly 8 ha. Canopy tree damage and regeneration were surveyed in 1991 and 1999. Two primary hypotheses were tested, both of which derive from regeneration being primarily via the release of suppressed saplings rather than new seedling establishment: (1) Biomass and carbon accumulation will be faster than accumulation reported from a similar forest that experienced similar severity of wind disturbance; and (2) The stand will experience very little change in species composition or diversity. Estimated immediate post-disturbance (1989) aboveground live-tree carbon was 20.7 ± 43.9 Mg ha−1 (9.9% of pre-disturbance) Ten years after the disturbance, carbon in aboveground live tree biomass increased to 37.1 ± 47.9 Mg ha−1; thus for the first decade, annual accumulation averaged 1.6 Mg ha−1 of carbon; this was significantly faster than the rate reported in a similar forest that experienced similar severity of wind disturbance. The species diversity of woody stems ten years after the disturbance was significantly higher (nonoverlapping confidence intervals of rarefaction curves) than pre-disturbance canopy trees. Thus, hypothesis 1 was confirmed while hypothesis 2 was rejected. This study augments the limited number of longer-term empirical studies that report biomass and carbon accumulation rates after wind disturbance, and can therefore serve as a benchmark for mechanistic and modeling research.

Description: This paper examines the strength of wood adhesive bonds at high temperatures. The goal of this research is to better understand the conditions of heat delamination in cross laminated timber (CLT) that is exposed to fire. Heat delamination in CLT occurs when one lamination detaches from the composite panel before the char front reaches the bondline. Timber that falls from the panel, as a result of delamination, contributes additional fuel to the fire, which can cause fire regrowth, while the loss of a lamination causes a sudden loss in strength. Currently, to demonstrate that an adhesive does not delaminate, it must pass a full scale (6 m by 3 m) compartment fire test as prescribed in the PRG-320 product standard. In this work, we scaled down the mechanical loads and temperatures to 300 mm lap shear specimens. Seven different adhesives were tested and compared against solid wood controls with the same geometry as the lap shear specimens. Quasi-static tests were run where the specimens were loaded to failure at 25 °C and 260 °C, when the samples were at thermal equilibrium. Additionally, creep tests were performed where the load and temperature ramp was matched to the adhesive bondline temperatures measured in the large scale PRG-320 tests. With the exception of some of the polyurethane formulations, all adhesives passed the scaled-down creep test that resembles the PRG-320 standard. Of the polyurethane adhesives tested, only one formulation remained intact for the duration of the test. These results can be used to help better predict which adhesives may pass the PRG-320 test prior to full scale testing.

Description: Genetic variation and phenotypic stability in Norway spruce were studied based on provenances, families, and clones planted in trials at 12 sites in four Nordic countries. The families were generated in a factorial cross between 10 parents of Norwegian origin and 10 parents of Eastern European origin, and the clones were propagated from seedlings within 20 of the same families. Traits analyzed were survival, proportion of trees with stem defects, and tree heights. Stability was analyzed by regression analyses with the genetic entries’ annual shoot increment as the dependent variable and the total site mean as an environmental index. Information about growth and phenology traits were available from short-term tests. For tree heights, significant variance components were present both among female and male parents, but not for their interactions, indicating that non-additive genetic effects are small. Genotype × environment interactions were significant at all three genetic levels, but their variance components had considerably lower values than the variance components estimated for the effects of families and clones. For the set of families of Norwegian origin, strong relationships were observed between the timing of annual shot elongation, mortality, and height growth. Large variation was found at all three genetic levels for phenotypic stability measured by regression coefficients. A positive relationship was present between the regression coefficient and the timing of annual shoot growth for families, indicating that later flushing families responded more to a high site index. The regression coefficient can be a useful supplement to the breeding value when selecting for superior and stable genotypes.

Description: Plant architecture improvement is of great significance in influencing crop yield, harvesting efficiency and ornamental value, by changing the spatial structure of the canopy. However, the mechanism on plant architecture in woody plants is still unclear. In order to study the genetic control of plant architecture traits and promote marker-assisted selection (MAS), a genetic linkage map was constructed, and QTL mapping was performed. In this study, using 188 BC2 progenies as materials, a genetic map of Lagerstroemia was constructed using amplification fragment length polymorphisms (AFLP) and simple sequence repeats (SSR) markers, and the QTLs of four key plant architecture traits (plant height, crown width, primary lateral branch height and internode length) were analyzed. The genetic map contains 22 linkage groups, including 198 AFLP markers and 36 SSR markers. The total length of the genome covered by the map is 1272 cM, and the average distance between markers is 6.8 cM. Three QTLs related to plant height were located in LG1, LG4 and LG17 linkage groups, and the phenotypic variation rates were 32.36, 16.18 and 12.73%, respectively. A QTL related to crown width was located in LG1 linkage group, and the phenotypic variation rate was 18.07%. Two QTLs related to primary lateral branch height were located in the LG1 and LG7 linkage groups, and the phenotypic variation rates were 20.59 and 15.34%, respectively. Two QTLs related to internode length were located in the LG1 and LG20 linkage groups, and the phenotypic variation rates were 14.86 and 9.87%. The results provide a scientific basis for finely mapping genes of plant architecture traits and marker-assisted breeding in Lagerstroemia.

Description: Background: The spread of herbicide-resistance Ambrosia artemisiifolia threatens not only the production of agricultural crops, but also the composition of weed communities. The reduction of their spread would positively affect the biodiversity and beneficial weed communities in the arable habitats. Detection of resistant populations would help to reduce herbicide exposure which may contribute to the development of sustainable agroecosystems. Methods: This study focuses on the application of target-site resistance (TSR) diagnostic of A. artemisiifolia caused by different herbicides. We used targeted amplicon sequencing (TAS) on Illumina Miseq platform to detect amino acid changes in herbicide target enzymes of resistant and wild-type plants. Results: 16 mutation points of four enzymes targeted by four herbicide groups, such as Photosystem II (PSII), Acetohydroxyacid synthase (AHAS), 5-enolpyruvylshikimate 3-phosphate synthase (EPSPS) and protoporphyrinogen IX oxidase (PPO) inhibitors have been identified in common ragweed populations, so far. All the 16 mutation points were analyzed and identified. Out of these, two mutations were detected in resistant biotypes. Conclusions: The applied next-generation sequencing-targeted amplicon sequencing (NGS-TAS) method on A. artemisiifolia resistant and wild-type populations enable TSR detection of large sample numbers in a single reaction. The NGS-TAS provides information about the evolved herbicide resistance that supports the integrated weed control through the reduction of herbicide exposure which may preserve ecological properties in agroecosystems.

Description: Plant–soil microbe interactions are complex and affected by many factors including soil type, edaphic conditions, plant genotype and phenotype, and developmental stage. The rice rhizosphere microbial community composition of nine recombinant inbred lines (RILs) and their parents, Francis and Rondo, segregating for root and shoot biomass, was determined using metagenomic sequencing as a means to examine how biomass phenotype influences the rhizosphere community. Two plant developmental stages were studied, heading and physiological maturity, based on root and shoot biomass growth patterns across the selected genotypes. We used partial least squares (PLS) regression analysis to examine plant trait-driven microbial populations and identify microbial species, functions, and genes corresponding to root and shoot biomass as well as developmental stage patterns. Species identified correlated with increases in either root or shoot biomass were widely present in soil and included species involved in nitrogen cycling (Anaeromyxobacter spp.) and methane production (Methanocellaavoryzae), as well as known endophytes (Bradyrhizobium spp.). Additionally, PLS analysis allowed us to explore the relationship of developmental stage with species, microbial functions, and genes. Many of the community functions and genes observed during the heading stage were representative of cell growth (e.g., carbohydrate and nitrogen metabolism), while functions correlated with physiological maturity were indicative of cell decay. These results are consistent with the hypothesis that microbial communities exist whose metabolic and gene functions correspond to plant biomass traits.

Description: The understanding of spatial distribution patterns of native riparian tree species in Europe lacks accurate species distribution models (SDMs), since riparian forest habitats have a limited spatial extent and are strongly related to the associated watercourses, which needs to be represented in the environmental predictors. However, SDMs are urgently needed for adapting forest management to climate change, as well as for conservation and restoration of riparian forest ecosystems. For such an operative use, standard large-scale bioclimatic models alone are too coarse and frequently exclude relevant predictors. In this study, we compare a bioclimatic continent-wide model and a regional model based on climate, soil, and river data for central to south-eastern Europe, targeting seven riparian foundation species—Alnus glutinosa, Fraxinus angustifolia, F. excelsior, Populus nigra, Quercus robur, Ulmus laevis, and U. minor. The results emphasize the high importance of precise occurrence data and environmental predictors. Soil predictors were more important than bioclimatic variables, and river variables were partly of the same importance. In both models, five of the seven species were found to decrease in terms of future occurrence probability within the study area, whereas the results for two species were ambiguous. Nevertheless, both models predicted a dangerous loss of occurrence probability for economically and ecologically important tree species, likely leading to significant effects on forest composition and structure, as well as on provided ecosystem services.

Description: Environmental changes in national parks are generally subject to constant observation. A particular case is parks located in mountains, which are more vulnerable to climate change and the binding of pollutants in mountain ranges as orographic barriers. The effectiveness of forest soil monitoring networks based on a systematic grid with a predetermined density has not been analysed so far. This study’s analysis was conducted in the Stolowe Mountains National Park (SMNP), SW Poland, using total Pb concentration data obtained from an initial network of 403 circle plots with centroids arranged in a regular 400 × 400 m square grid. The number and distribution of monitoring plots were analysed using geostatistical tools in terms of the accuracy and correctness of soil parameters obtained from spatial distribution imaging. The analysis also aimed at reducing the number of monitoring plots taking into account the economic and logistic aspects of the monitoring investigations in order to improve sampling efficiency in subsequent studies in the SMNP. The concept of the evaluation and modification of the monitoring network presented in this paper is an original solution and included first the reduction and then the extension of plot numbers. Two variants of reduced monitoring networks, constructed using the proposed procedure, allowed us to develop the correct geostatistical models, which were characterised by a slightly worse mean standardised error (MSE) and root mean squared error (RMSE) compared to errors from the original, regular monitoring network. Based on the new geostatistical models, the prediction of Pb concentration in soils in the reduced grids changed the spatial proportions of areas in different pollution classes to a limited extent compared to the original network.

Description: Improved mechanistic understanding of soil methane (CH4) exchange responses to shifts in soil moisture and temperature in forest ecosystems is pivotal to reducing uncertainty in estimates of the soil-atmospheric CH4 budget under climate change. We investigated the mechanism behind the effects of soil moisture and temperature shifts on soil CH4 fluxes under laboratory conditions. Soils from the Huai River Basin in China, an area that experiences frequent hydrological shifts, were sampled from two consecutive depths (0–20 and 20–50 cm) and incubated for 2 weeks under different combinations of soil moisture and temperature. Soils from both depths showed an increase in soil moisture and temperature-dependent cumulative CH4 fluxes. CH4 production rates incubated in different moisture and temperature in surface soil ranged from 1.27 to 2.18 ng g−1 d−1, and that of subsurface soil ranged from 1.18 to 2.34 ng g−1 d−1. The Q10 range for soil CH4 efflux rates was 1.04–1.37. For surface soils, the relative abundance and diversity of methanotrophs decreased with moisture increase when incubated at 5 °C, while it increased with moisture increase when incubated at 15 and 30 °C. For subsurface soils, the relative abundance and diversity of methanotrophs in all samples decreased with moisture increase. However, there was no significant difference in the diversity of methanogens between the two soil depths, while the relative abundance of methanogens in both depths soils increased with temperature increase when incubated at 150% water-filled pore space (WFPS). Microbial community composition exhibited large variations in post incubation samples except for one treatment based on the surface soils incubated at 15 °C, which showed a decrease in the total and unique species number of methanotrophs with moisture increase. In contrast, the unique species number of methanogens in surface soils increased with moisture increase. The analysis of distance-based redundancy analysis (db-RDA) showed that soil pH, dissolved organic carbon (DOC), dissolved organic nitrogen (DON), microbial biomass carbon (MBC), NO3−-N, and NH4+-N mainly performed a significant effect on methanotrophs community composition when incubated at 60% WFPS, while they performed a significant effect on methanogens community composition when incubated at 150% WFPS. Overall, our findings emphasized the vital function of soil hydrology in triggering CH4 efflux from subtropical plantation forest soils under future climate change.

Description: Crown architecture has long been evaluated for its impact on taper modeling. However, most of the research has focused on a limited number of crown dimensions. This study examined the effect of adding several crown dimensions in improving the diameter and volume estimates of Dahurian larch, Korean spruce, and Manchurian fir in northeast China. The crown dimensions included crown length, crown ratio, crown width, height to live crown base, diameter at the crown base, and crown shape. A well-known taper model of Clark et al. (1991) was fitted to the data of 276 trees from natural stands. To adjust the inherent autocorrelation in the data, we added a third-order continuous-time error structure in the model fit. Model fitting was carried out with the NLMIXED procedure (Non-linear Mixed Procedure), followed by the MODEL procedure of SAS using the generalized nonlinear least-squares method. Fit statistics and graphical assessments were used to evaluate the original and modified models. Above 98% of the total variance of d was explained by the models for all species. The addition of crown variables showed slight improvements for root mean square error (RMSE) values in the analyzed species. The RMSE plots indicated that the models with crown variables slightly improved the diameter and volume predictions for the species but only for the upper stem (〉50%–90%). The study demonstrated that crown dimensions influence the stem taper, but the original model of Clark et al. (1991) reasonably realized that effect.

Description: We investigated changes in soil chemistry and foliar metabolism of Himalayan cedar [Cedrus deodara (Roxb. Ex Lamb.) G.Don] and Himalayan spruce [Picea smithiana (Wall.) Boiss] trees along a steep elevational gradient in the lower Himalayan Mountains at Kufri, Himachal Pradesh (HP), India. The foliar and soil samples were collected from four locations along a 300 m elevational gradient at ridge, high-, mid-, and low-elevation sites within the forested Shimla Water Catchment Wildlife Sanctuary that provides water for the city of Shimla, HP,. Observations at the time of sampling revealed that the high-elevation site was being heavily grazed. Soils collected at the four sites showed differences in soil chemistry along the gradient. Surface soils (top 10 cm) at the high-elevation site had the highest concentrations of carbon, nitrogen, calcium, magnesium, phosphorus, organic matter, and effective cation exchange capacity, possibly caused by grazing. Mineral soils were slightly acidic at all sites except the mid-elevation site, which was extremely acidic in the upper mineral soil. Similar to surface soil chemistry, foliar metabolism was also comparatively unique for high elevation. In Himalayan cedar foliage, higher concentrations of soluble proteins, polyamines, amino acids, and potassium were observed at the high-elevation site as compared to the ridge, mid and low elevations. No major differences were observed in the metabolic profiles of cedar between the ridge and low elevation ranges. Spruce foliage was sampled only from the ridge and low elevations and its metabolic profiles suggested healthier conditions at the low elevation. The results of the study demonstrate the impact of the interplay between local and regional drivers of forest health on cedar and spruce trees in a forested catchment that acts as a water source for downstream communities.

Description: There is a demand for more progressive restoration directives to regenerate forest ecosystems impacted by harvesting, wildfire, insect outbreaks, and mineral resource extraction. Forest restoration may take many decades and even centuries without active silvicultural intervention to grow large trees that provide suitable habitat for various wildlife species. We tested the hypotheses (H) that, compared with unmanaged (unthinned and old-growth) stands, large-scale precommercial thinning (heavy thinning to

Description: Generalization of nautical charts and electronic nautical charts (ENCs) is a critical process which aims at the safety of navigation and clear cartographic presentation. This paper elaborates on the problem of depth contours and coastline generalization—natural and artificial—for medium-scale charts (harbour and approach) taking into account International Hydrographic Organization (IHO) standards, hydrographic offices’ (HOs) best practices and cartographic literature. Additional factors considered are scale, depth, and seafloor characteristics. The proposed method for depth contour generalization utilizes contours created from high-resolution digital elevation models (DEMs) or those already portrayed on nautical charts. Moreover, it ensures consistency with generalized soundings. Regarding natural coastline generalization, the focus was on managing the resolution, while maintaining the shape, and on the islands. For the provision of a suitable generalization solution for the artificial shoreline, it was preprocessed in order to automatically recognize the shape of each structure as perceived by humans (e.g., a pier that looks like a T). The proposed generalization methodology is implemented with custom-developed routines utilizing standard geo-processing functions available in a geographic information system (GIS) environment and thus can be adopted by hydrographic agencies to support their ENC and nautical chart production. The methodology has been tested in the New York Lower Bay area in the U.S.A. Results have successfully delineated depth contours and coastline at scales 1:10 K, 1:20 K, 1:40 K and 1:80 K.

Description: Addis Ababa, the capital of Ethiopia, is urbanizing very fast. This study aimed to assess urban expansion and Urban Green Spaces (UGS) change in the city from 1989 to 2019. Remote Sensing and Geographical Information System (GIS) and Landscape Expansion Index (LEI) were used to extract Land Use Land Cover (LULC) data, measure urban expansion and UGS change and analyze urban growth pattern in inner zone, outer zone and eight quadrants. The results showed that urban area in the inner zone increased from 3712 ha to 3716 ha (0.1%), and from 3716 ha to 3874 ha (4.2%) and in the first (1989–1999) and second periods (1999–2009), while it decreased from 3874 ha to 3733 ha (3.6%) in the third period (2009–2019), portraying a non-unidirectional trend of change. Conversely, the UGS in the inner zone decreased from 60 ha to 54 ha (10%), and from 54 ha to 38 ha (29.6%) in the first and second periods, while it increased from 38 ha to 53 ha (39.4%) in the third period, reporting spatial tradeoff between the two land cover types. Meanwhile, urban areas in the outer zone increased from 10,729 ha to 15,112 ha (40%), from 15,112 ha to 21,377 ha (41.4%) and from 21,377 ha to 28,176 ha (31.8%) in the first, second and third periods, respectively, representing frontiers of suburbanization. On the other hand, the UGS in the outer zone decreased from 3624 ha to 3171 ha, from 3127 ha to 2555 ha and from 2555 ha to 1879 ha, with an annual rate of decline of 1.25%, 1.8% and 2.6%, respectively, showing increasing trend of UGS destruction for urban construction. Furthermore, the LEI analysis result showed that urban expansion pattern demonstrated largely an outlying growth characterized by differentiation and isolation of patches, whereas the infill and edge expansion pattern were insignificant and fluctuated over 30 years. Furthermore, the directional analysis showed that urban area predominately expanded in SEE,〉 SSE,〉 SSW,〉 SWW,〉 and NEE directions with varying magnitude in the first, second and third period, but decreased in third period in NWW, 〈 NNW〈 and NNE directions. In response to such urban growth pattern, the center of gravity of urban area shifted from north to south during the study period, displaying main direction urbanization in recent years. Conclusively, zonal and directional studies are more effective in characterizing the Spatio-temporal dynamics variabilities of urban expansion and UGS change for informed urban planning towards sustainable urban development.

Description: Soil erosion is one of the major processes degrading the natural environment but also agricultural production areas. Soil erosion may lead to soil organic carbon (SOC) loss, especially from sloping agricultural terrain units. The use of phytomelioration in environmental management, particularly long-term, permanent forest vegetation, is widely recognized as a possible measure for soil erosion protection and mitigation of climate change through carbon sequestration. The aim of this study was to compare of the topsoil organic carbon stocks on the slopes under soil-protecting forests in relation to the adjacent agricultural slopes. The research was conducted in the young glacial landscape of North-Central Poland. The study indicated the significant role of forest management on the increase of soil organic matter content and SOC stock. The results show that land use and slope gradients are important factors controlling soil organic carbon pools in topsoil in young glacial areas. This topic is extremely important particularly as the effects of climate change become more and more visible, and society faces new challenges in preventing these changes.

Description: This paper explores the link between the current vision of the “smart city” and the notion of urban autopoiesis understood as self-organized/managed urban systems. It seeks to highlight how the use of GIS analysis, applied to the study of informal settlements, can provide useful information to understand the smart city paradigm. The paper argues the key idea that a smart city should not be seen only as a high-tech urban environment because the transition to smartness will need major changes in its inner structure. Using a combination of quantitative and qualitative GIS analysis methods, this study examines the case of the BaSECo Compound, one of the densest informal settlements in Metro Manila (Philippines), with the aim of both generating a comprehensive morphological analysis of this dynamic urban area as well as contributing to the configurational theory of the smart city. The results suggest that the analysis of autopoietic urban systems could expand our understanding of how the structure of the city could evolve to accommodate the needs of its citizens and creating more resilient and inclusive communities.

Description: The high altitude mountain slopes of the Dolomites (Italian Alps) are characterized by great habitat and landform heterogeneities. In this paper, we investigated the effect of Nature 2000 habitat and landform types in driving the high altitude ground beetle (Carabidae) distribution in the Western Dolomites (Brenta group, Italy). We studied the carabid assemblages collected in 55 sampling points distributed in four Nature 2000 habitat types and four landform types located between 1860 and 2890 m above sea level (a.s.l.). Twenty-two species, half of them Alpine endemics, were sampled. Species richness and taxonomic distinctness did not show any significant difference among habitat types; conversely, these differences became significant when the landform type was considered. Total activity density and the frequency of brachypterous, endemic and predatory species showed significant differences between both habitat and landform types. Indicator species analysis identified twelve species linked to a specific habitat type and thirteen species linked to a specific landform type. Canonical correspondence analysis showed that altitude and vegetation cover drove the species distribution in each habitat and landform type while the aspect had a weak effect. Our results highlight the need for a geomorphological characterization of the sampling points when high altitude ground-dwelling arthropods are investigated.

Description: Simulation games, as a method of playful learning, have been used for more than 70 years in various disciplines with the economy as a leading application field. Their development has been tied with advances in computer science, and nowadays, hundreds of simulation games exist. However, simulation games are not just useful for encouraging disciplinary knowledge production; they also promise to be effective tools for interdisciplinary collaboration. To further explore these promises, we report on the design and playing of a simulation game on the boundary of geoinformatics and business and economics; an interdisciplinary field we have termed Spationomy. Within this game, students from different disciplinary (and cultural) backgrounds applied their knowledge and skills to tackle interdisciplinary problems. In this paper, we also analyze students’ feedback on the game to complement this aspect. The main goal is to discuss the design process that went into creating the game as well as experiences from play sessions in relation to this increase of interdisciplinary knowledge among students. In the end, we present a new gaming concept based on real-world data that can be played in other interdisciplinary situations. Here, students´ feedback on individual features of the game helped to identify future directions in the development of our simulation game.

Description: In recent years, due to the shortage of timber resources, it has become necessary to reduce the excessive consumption of forest resources. Non-destructive testing technology can quickly find wood defects and effectively improve wood utilization. Deep learning has achieved significant results as one of the most commonly used methods in the detection of wood knots. However, compared with convolutional neural networks in other fields, the depth of deep learning models for the detection of wood knots is still very shallow. This is because the number of samples marked in the wood detection is too small, which limits the accuracy of the final prediction of the results. In this paper, ResNet-34 is combined with transfer learning, and a new TL-ResNet34 deep learning model with 35 convolution depths is proposed to detect wood knot defects. Among them, ResNet-34 is used as a feature extractor for wood knot defects. At the same time, a new method TL-ResNet34 is proposed, which combines ResNet-34 with transfer learning. After that, the wood knot defect dataset was applied to TL-ResNet34 for testing. The results show that the detection accuracy of the dataset trained by TL-ResNet34 is significantly higher than that of other methods. This shows that the final prediction accuracy of the detection of wood knot defects can be improved by TL-ResNet34.

Description: Understanding temporal changes in the distribution and abundance of various species is one of the key goals of conservation biology. During recent decades, the abundance and distribution of many species of plants and animals have declined dramatically, mainly because of habitat loss and fragmentation. The purpose of this study is to analyze the rate of extinction of orchids at various sites in different 20-year time intervals over the last 150 years, determined according to changes in society. Using the dataset of the orchid records of the Nature Conservation Agency of the Czech Republic, we determined the disappearance rate of orchids from sites using a grid of 1 × 1 km. We found that the vast majority of orchids disappeared from many of their historical localities in all time intervals analyzed. The number of sites suitable for Czech orchids declined by 8–92%, depending on the species. The most threatened orchid species in the Czech Republic are Spiranthes spiralis, Anacamptis palustris, Epipogium aphyllum and Goodyera repens. This all seems to be closely related with changes in agricultural practices in the open as well as in forest habitats. Preserving suitable orchid habitats seems to be the key for keeping Czech orchid flora alive.

Description: Increasing numbers of explanatory variables tend to result in information redundancy and “dimensional disaster” in the quantitative remote sensing of forest aboveground biomass (AGB). Feature selection of model factors is an effective method for improving the accuracy of AGB estimates. Machine learning algorithms are also widely used in AGB estimation, although little research has addressed the use of the categorical boosting algorithm (CatBoost) for AGB estimation. Both feature selection and regression for AGB estimation models are typically performed with the same machine learning algorithm, but there is no evidence to suggest that this is the best method. Therefore, the present study focuses on evaluating the performance of the CatBoost algorithm for AGB estimation and comparing the performance of different combinations of feature selection methods and machine learning algorithms. AGB estimation models of four forest types were developed based on Landsat OLI data using three feature selection methods (recursive feature elimination (RFE), variable selection using random forests (VSURF), and least absolute shrinkage and selection operator (LASSO)) and three machine learning algorithms (random forest regression (RFR), extreme gradient boosting (XGBoost), and categorical boosting (CatBoost)). Feature selection had a significant influence on AGB estimation. RFE preserved the most informative features for AGB estimation and was superior to VSURF and LASSO. In addition, CatBoost improved the accuracy of the AGB estimation models compared with RFR and XGBoost. AGB estimation models using RFE for feature selection and CatBoost as the regression algorithm achieved the highest accuracy, with root mean square errors (RMSEs) of 26.54 Mg/ha for coniferous forest, 24.67 Mg/ha for broad-leaved forest, 22.62 Mg/ha for mixed forests, and 25.77 Mg/ha for all forests. The combination of RFE and CatBoost had better performance than the VSURF–RFR combination in which random forests were used for both feature selection and regression, indicating that feature selection and regression performed by a single machine learning algorithm may not always ensure optimal AGB estimation. It is promising to extending the application of new machine learning algorithms and feature selection methods to improve the accuracy of AGB estimates.