ALBERT

Description: A temporary seismic array was installed in combination with a meteorological station in the Dead Sea valley, Jordan. Within the scope of the HGF virtual institute DESERVE we operated 15 temporary seismic stations between February 2014 and February 2015 together with a nearby meteorological station close to the east coast of the Dead Sea. The main aim was to acquire data to study the influence of wind on seismic records and retrieve related meteorological parameters. The study area is scarcely populated and has ideal meteorological conditions to study periodically occurring winds.

Description: The International Continental Scientific Drilling Program (ICDP) performed a dual-phase scientific drilling project to investigate mountain-building processes called Collisional Orogeny in the Scandinavian Caledonides (COSC). The borehole COSC-1 was drilled through the Lower Seve Nappe, as the first of two 2.5 km deep drill holes close to Åre, central Sweden. The recovered rocks comprise a 1650 m thick suite of high grade gneisses and amphibolites with clear Seve Nappe affinities, while the lower 850 m com-prise rather homogenous mylonitic gneisses with interfingered K-rich phyllonite bands of cm to several m size and some intercalated amphibolites. The different lithologies all crosscut the core in a subhorizontal direction with foliation of gneisses and phyllonites in the same direction. Albite and garnet porphyroblasts with pressure shadows show syn-deformational growth and the same sub-horizontal alignment. The focus was to detect chemical and mineralogical differences in mylonitic and host rocks and to relate these differences to either metasomatism and deformation or inher-ited source rock variance. Another goal of this work is to compare chemical core scanning instruments. For this purpose, two different μ-Energy-Dispersive X-Ray Fluorescence (μ-EDXRF), Laser Induced Breakdown Spectroscopy (LIBS) and hyperspectral imaging tech-niques served to measure seven samples from the lower 850 m of the COSC-1 core. This report will explain the data sets gained during this study. The metadata will be pre-sented in an additional file including XRF data from the AVAATECH XRF core scanner in a text file as well as data sets of the other used devices in original file formats.

Description: Movie 7: "The abandonment of a CO2 storage site – pilot project Ketzin" (Length 10:39) Produktionsjahr: 2015

Description: This document provides information on the site effects studies carried out in Kyrgyzstan. These studies are carried out within the Global Change Observatory Central Asia of the GFZ and the Earthquake Model Central Asia (EMCA). Furthermore, the site effects estimated using different approaches are incorporated into the probabilistic seismic hazard assessment (PSHA) for Bishkek.

Description: This publication compiles the operational data (flow rate, cumulative mass, density, injection temperature, electrical conductivity and in-well pressure data) recorded during a field experiment on brine injection at the Ketzin pilot site during October 2015 to January 2015. Anyone should feel free to make use of the published data for any ethical purpose (civil use) – for example for process modelling and engineering.

Description: Radial water jet drilling uses the power of a focused uid jet, which is capable of drilling multiple laterals of about 100 m length out of an existing well and thereby stimulating the well with full control on the operational parameters like initial direction of the lateral, length, uid pressure etc. In contrast to hydraulic stimulation treatments, this technology can potentially provide a network of enhanced uid pathways around a geothermal well to intersect with existing high permeable structures like fracture or karst systems within the reservoir, independent of the ambient stress eld. Applying RJD, laterals typically have a diameter ranging from about 25 mm to 50 mm, depending on jetting parameters like pressure and ow rate as well as rock properties. Drilling a single lateral in a cased well requires approximately 12 hours, as the casing has to be penetrated using a coiled tubing operated milling bit before jetting into the formation. In case the target zone is open-hole, jetting a lateral is considerably faster. Compared to conventional hydraulic stimulation treatments with required uid volumes of more than 1000 m3, only a fraction of this is needed for RJD (〈 1 m3). In addition, no pressure will be applied to the reservoir, thereby reducing environmental risk as well as the risk of induced seismicity considerably. Although RJD is investigated and applied in the hydrocarbon industry, applications in geothermal wells are very rare. If the technology can be shown to increase the eciency of a geothermal well, it will provide an interesting alternative to conventional hydraulic stimulation treatments. RJD shows highest eciency in terms of performance increase in reservoirs with low permeability (〈 10 mD). The most important criteria for the well are the minimum diameter (4 1/2" OD casings) and maximum along hole depth (about 5 km). So far, RJD operations have been performed in wells with a an inclination of up to 46 . Technologies, however, have been developed to perfom RJD operations even in horizontal well sections. Depending on the initial production; for tight gas reservoirs the gas production can be improved with a factor 4-7, simulation for geothermal wells suggest a potential performance increase by a factor of up to 3 when 8 laterals of 100 meter are successfully drilled and geological conditions are favourable. Since the potential increase depends on the type of the geothermal reservoir as well as its properties, the improvement factor has to be conrmed by eld experiments. Currently no major hazards to the well have been identied. The main risk associated with a RJD treatment appears to be sand production from the open-hole completion. However since the amount of experience and well-documented cases is limited, not all risks may have been identied at this moment in time. Major uncertainties in the production estimates are the long-term (〉1 year) stability of the jetted laterals and the eect of sub-surface heterogeneity. The jet-ability of typical geothermal reservoir rocks is also not well documented. As the jet-ability strongly depends on physical rock properties and in-situ reservoir conditions, which are signicantly dierent to typical hydrocarbon reservoirs, the feasibility of RJD in dierent geological settings has to be evaluated. Although, RJD presents a low cost stimulation method with currently no major identied risk to the well nor to the environment, experience with RJD in the geothermal industry is rare. Field applications are therefore key to evaluate the potential of the RJD stimulation technology for geothermal applications.

Description: The International Geodynamics and Earth Tide Service (IGETS) was established in 2015 by the International Association of Geodesy (IAG). IGETS continues the activities of the Global Geodynamics Project (GGP, 1997-2015) to provide support to geodetic and geophysical research activities using superconducting gravimeter data within the context of an international network. The primary objective of IGETS is to provide a service to monitor temporal variations of the Earth’s gravity field through long-term records from ground gravimeters, tiltmeters, strainmeters and other geodynamic sensors. IGETS also continues the activities of the International Center for Earth Tides, in particular, in collecting, archiving and distributing Earth tide records from long series of the various geodynamic sensors. This report is a compilation of data descriptions originating to a large part from GGP but including updates and extensions for IGETS.

Description: Developing ow paths or expanding existing pathways in deep geological strata is generally referred to as "stimulation". To extract heat from geothermal reservoirs, stimulation treatments are carried out by injecting water at high pressure into the formation (hydraulic stimulation), by dissolution of certain mineral components, mostly carbonates, thus increasing the hydraulic pathways (chemical stimulation), or by cooling of the rock to induce tensile stresses which helps the fracture expansion (thermal stimulation). The achieved factor of productivity increase by conventional stimulation treatments is reported to be between 1.3 and 25. In petrolium industry a significant decline of the production increase occurs already during the first year after stimulation. The time to refracturing is typically 4 to 7 years. It is not clear whether these values are also appropriate for geothermal applications. The sustainability of the increase in permeability due to thermal stimulation depends on the situation: for an injection well the increase remains for few years. For production wells, the longevity of the stimulation depends on the self-propping ability of the rock. After reviewing the current situation in the field of deep geothermal energy in Europe, dierent stimulation techniques are discussed. Furthermore, case studies of stimulation treatments in deep geothermal reservoirs are presented. In the subsequent chapters the authors present the methods of stimulation treatment in deep geothermal wells to show the increase of productivity, to explain the potential benefits and risks and estimate the economic performance.

Description: This publication is a result of the 14th TRACE conference (Tree Rings in Archaeology, Climatology and Ecology) organized by the Department Physical, Chemical and Natural Systems of the University Pablo de Olavide (UPO) and the Association for Tree-ring Research (ATR), in collaboration with Pyrenean Institute of Ecology-Spanish National Research Council (IPE-CSIC), University of Barcelona (UB), Forest and Wood Technology Research Centre (CETEMAS) and University of Valladolid (UVa). The TRACE 2015 conference was held on May 20-23, 2015 for the first time in the Iberian Peninsula, in Sevilla, Spain.

Description: The Paris Agreement adopted in December 2015 provides the basis for future international cooperation on the field of climate change mitigation. While truly global in reach, the agreement will however result in an increasingly complex new climate regime: Instead of using a uniform formula, Parties are allowed to autonomously define their NDCs (nationally determined contributions), resulting in a large diversity of contributions. This poses significant challenges for emissions accounting and the transfer of emission units. This Policy Paper explores how these challenges can be addressed by analysing different types of NDCs and assessing their compatibility with the export and use of emission units. On that basis, the authors develop opt-in provisions for Parties willing to participate in unit transfers under the new climate regime and illustrate how potential risks to environmental integrity can be addressed.

Description: The Greens / European Free Alliance Group of the European Parliament contracted Wuppertal Institute in collaboration with Energiaklub to develop scientifically sound, comprehensive, alternative, and sustainable long term energy scenarios for Hungary, which cover potential development paths till 2030 and 2050. The scenarios developed deliver information about the costs and long-term effects of different energy choices for Hungary as well as credible information on potential benefits of greening the energy mix. As a result, the study aims to provide policy makers with better evidence for making informed, prudent and forward-thinking decisions in this field.

Description: This JIKO Policy Paper analyses a series of very ambitious mitigation scenarios and complements this analysis with a review of several sectoral technology roadmaps. The results are quite clear: there is no reason to believe that international carbon trading will become obsolete any time soon. Whether or not international carbon trading is to play a role in international climate protection efforts is in the end not a physical or economic question, but a political one.

Description: The current utilisation of natural resources in Germany and Europe is not sustainable, as inter alia stated by the German government as well as by the European Commission. At the same time, increased resource efficiency could lead to various environmental but also economic benefits. This brief study commissioned by Changing Markets presents developments in the field of resource efficiency policies, analyses the status quo of resource consumption with a special focus on fast moving consumer goods and describes potential effects of resource conservations.

Description: This paper analyses the risks to environmental integrity associated to the transfers of mitigation outcomes in the context of Art. 6 of the Paris Agreement and provides an overview on approaches and tools that could be used for addressing them. The analysis shows that some of the environmental integrity risks can be dealt with at the technical level. This relates, inter alia, to the risks of mitigation outcomes being unreal or non-permanent as well as to carbon leakage and rebound effects. Here, robust MRV provisions should be established. Other risks will be difficult to address without touching the new and open structure of the Paris Agreement. This applies, for example, to risks associated to the diverse nature of NDCs, and requires further investigation.