ALBERT

Description / Table of Contents: The publication of this volume occurs at the one-hundredth anniversary of 1905, which has been called the annus mirabilus because it was the year of a number of enormous scientific advances. Among them are four papers by Albert Einstein explaining (among other things) Brownian motion, the photoelectric effect, the special theory of relativity, and the equation E = mc2. Also of significance in 1905 was the first application of another major advance in physics, which dramatically changed the fields of Earth and planetary science. In March of 1905 (and published the following year), Ernest Rutherford presented the following in the Silliman Lectures at Yale: "The helium observed in the radioactive minerals is almost certainly due to its production from the radium and other radioactive substances contained therein. If the rate of production of helium from known weights of the different radioelements were experimentally known, it should thus be possible to determine the interval required for the production of the amount of helium observed in radioactive minerals, or, in other words, to determine the age of the mineral." Rutherford E (1906) Radioactive Transformations. Charles Scriber's Sons, NY Thus radioisotopic geochronology was born, almost immediately shattering centuries of speculative conjectures and estimates and laying the foundation for establishment of the geologic timescale, the age of the Earth and meteorites, and a quantitative understanding of the rates of processes ranging from nebular condensation to Quaternary glaciations. There is an important subplot to the historical development of radioisotopic dating over the last hundred years, which, ironically, arises directly from the subsequent history of the U-He dating method Rutherford described in 1905. Almost as soon as radioisotopic dating was invented, it was recognized that the U-He [or later the (U-Th)/He method], provided ages that were often far younger than those allowed by stratigraphic correlations or other techniques such as U/Pb dating. Clearly, as R.J. Strutt noted in 1910, He ages only provided "minimum values, because helium leaks out from the mineral, to what extent it is impossible to say" (Strutt, 1910, Proc Roy Soc Lond, Ser A 84:379-388). For several decades most attention was diverted to U/Pb and other techniques better suited to measurement of crystallization ages and establishment of the geologic timescale. Gradually it became clear that other radioisotopic systems such as K/Ar and later fission-track also provided ages that were clearly younger than formation ages. In 1910 it may have been impossible to say the extent to which He (or most other elements) leaked out of minerals, but eventually a growing understanding of thermally-activated diffusion and annealing began to shed light on the significance of such ages. The recognition that some systems can provide cooling, rather than formation, ages, was gradual and diachronous across radioisotopic systems. Most of the heavy lifting in this regard was accomplished by researchers working on the interpretation of K/Ar and fission-track ages. Ironically, Rutherfordπs He-based radioisotopic system was one of the last to be quantitatively interpreted as a thermochronometer, and has been added to K/Ar (including 40Ar/39Ar) and fission-track methods as important for constraining the medium- to low-temperature thermal histories of rocks and minerals. Thermochronology has had a slow and sometimes fitful maturation from what were once troubling age discrepancies and poorly-understood open-system behaviors, into a powerful branch of geochronology applied by Earth scientists from diverse fields. Cooling ages, coupled with quantitative understanding of crystal-scale kinetic phenomena and crustal- or landscape-scale interpretational models now provide an enormous range of insights into tectonics, geomorphology, and subjects of other fields. At the same time, blossoming of lower temperature thermochronometric approaches has inspired new perspectives into the detailed behavior of higher temperature systems that previously may have been primarily used for establishing formation ages. Increased recognition of the importance of thermal histories, combined with improved analytical precision, has motivated progress in understanding the thermochronologic behavior of U/Pb, Sm/Nd, Lu/Hf, and other systems in a wide range of minerals, filling out the temperature range accessible by thermochronologic approaches. Thus the maturation of low- and medium-temperature thermochronology has led to a fuller understanding of the significance of radioisotopic ages in general, and to one degree or another has permeated most of geochronology. Except in rare cases, the goal of thermochronology is not thermal histories themselves, but rather the geologic processes responsible for them. Thermochronometers are now routinely used for quantifying exhumation histories (tectonic or erosional), magmatism, or landscape evolution. As thermochronology has matured, so have model and interpretational approaches used to convert thermal histories into these more useful geologic histories. Low-temperature thermochronology has been especially important in this regard, as knowledge of thermal processes in the uppermost few kilometers of the crust require consideration of coupled interactions of tectonic, geodynamic, and surface processes. Exciting new developments in these fields in turn drive improved thermochronologic methods and innovative sampling approaches. The chapters This volume presents 22 chapters covering many of the important modern aspects of thermochronology. The coverage of the chapters ranges widely, including historical perspective, analytical techniques, kinetics and calibrations, modeling approaches, and interpretational methods. In general, the chapters focus on intermediate- to low-temperature thermochronometry, though some chapters cover higher temperature methods such as monazite U/Pb closure profiles, and the same theory and approaches used in low-temperature thermochronometry are generally applicable to higher temperature systems. The widely used low- to medium-temperature thermochronometric systems are reviewed in detail in these chapters, but while there are numerous chapters reviewing various aspects of the apatite (U-Th)/He system, there is no chapter singularly devoted to it, partly because of several previous reviews recently published on this topic. Chapter 1 by Reiners, Ehlers, and Zeitler provides a perspective on the history of thermochronology, comments on modern work in this field and general lessons on the potential for noise to be turned into signal. This chapter also provides a summary of the current challenges, unresolved issues, and most exciting prospects in the field. Much of the modern understanding of kinetic controls on apparent ages, thermal histories, and sampling approaches comes from decades of progress in fission-track dating, a method that remains as essential as ever, partly because of the power of track-length measurements and the depth of (at least empirical) understanding of the kinetics of track annealing. Tagami, Donelick and OπSullivan review the fundamentals of modern fission-track dating (Chapter 2). Two of the most commonly dated, well-understood, and powerful minerals dated by fission-track methods are apatite and zircon, and the specifics of modern methods for these systems and their kinetics are reviewed by Donelick, OπSullivan, and Ketcham (Chapter 3), and Tagami (Chapter 4). Although 40Ar/39Ar and (U-Th)/He dating methods followed somewhat different paths to their modern thermochronologic incarnations, they have many features in common, especially in the kinetics of diffusion and closure. Zeitler and Harrison review the concepts underlying both 40Ar/39Ar and (U-Th)/He methods (Chapter 5). Zircon was one of the first minerals dated by the (U-Th)/He method, but has only just begun to be used for thermochronometry of both bedrock and detrital samples, as reviewed by Reiners (Chapter 6). Continuous time-temperature paths from intracrystalline variations of radiogenic Ar proven perhaps the most powerful of all thermochronologic approaches, and an innovative analogous approach in He dating (4He/3He thermochronometry) is revealing remarkably powerful constraints on the extreme low temperature end of thermal histories, as reviewed by Shuster and Farley (Chapter 7). Thermochronology of detrital minerals provides unique constraints on the long-term evolution of orogens, sediment provenance, and depositional age constraints, to name a few. Bernet and Garver (Chapter 8) review the essentials of detrital zircon fission-track dating, one of the most venerable and robust of detrital thermochronometers, and in Chapter 9, Hodges, Ruhl, Wobus, and Pringle review the use of 40Ar/39Ar dating of detrital minerals, demonstrating the power of detrital muscovite ages in illuminating variations in exhumation rates in catchments over broad landscapes. (U-Th)/He thermochronometry presents several unique interpretational challenges besides new kinetics and low temperature sensitivity. One of these is long-alpha stopping distances, and its coupling with diffusion and U-Th zonation in age corrections. Dunai reviews modeling approaches to deal with these issues in interpreting low-temperature thermal histories (Chapter 10). Ketcham (Chapter 11) reviews the theory and calibration of both forward and inverse models of thermal histories from fission-track and (U-Th)/He data, and makes some important points about the interpretations of such models. Translating thermal histories into exhumational histories and their tectonic or geomorphic significance across a landscape requires quantitative understanding of the thermal structure of the crust and how it is perturbed, a review of which is presented by Ehlers (Chapter 12). Braun (Chapter 13) illustrates the power of low-temperature thermochronometry to constrain topographic evolution of landscapes over time, using PECUBE. Gallagher, Stephenson, Brown, Holmes, and Ballester present a novel method of inverse modeling of fission-track and (U-Th)/He data for thermal histories over landscapes (Chapter 14). Continuous time-temperature paths from closure profiles or their step-heating-derived equivalents are, to some degree, the holy grail of thermochronology. Harrison, Zeitler, Grove, and Lovera (Chapter 15) provide a review of the theory, measurement, and interpretation of continuous thermal histories at both intermediate and high temperatures, derived from both K-feldspar 40Ar/39Ar and monazite U/Pb dating. Extensional orogens provide a special challenge and opportunity for thermochronometry because tectonic exhumation by footwall unroofing often outstrips erosional exhumation, and often occurs at high rates. As Stockli shows (Chapter 16) thermochronology in these setting provides opportunities to measure rates of a number of important processes, as well as obtain a snapshot of crustal thermal structure and its imprint on thermochronometers with varying closure temperatures. Spotila (Chapter 17) reviews the use of thermochronology applied to tectonic geomorphology in a wide range of orogenic settings, introducing the concept of denudational maturity. Thermochronology has found great utility in economic geology, and newly developed approaches pose great potential in this area, and shown by McInnes, Evans, Fu, and Garwin in their review of the use and modeling of thermochronology of hydrothermal ore deposits (Chapter 18). The thermal histories of sedimentary basins are also critical to understanding thermal maturation of hydrocarbons, but are also critical for understanding basin formation, erosional histories of source regions, fluid flow, and climate change and other temporal signals preserved in sedimentary rocks. Armstrong (Chapter 19) reviews these issues and the use of thermochronology in deducing the thermal histories of sedimentary basins. Drawing on large datasets of bedrock apatite fission-track dates, Kohn, Gleadow, Brown, Gallagher, Lorencak, and Noble demonstrate the power of modeling, and, importantly, effectively visualizing, integrated thermotectonic and denudational histories over large regions (Chapter 20). Thermal histories of meteorites provide constraints on a wide range of fundamentally important processes, including nebular condensation and early solar-system metamorphic histories, and the dynamics of interplanetary collisions and shock metamorphism. Min reviews thermochronologic approaches to understanding meteorite thermal histories (Chapter 21), including new methods and approaches. Finally, the importance of robust models with which to interpret thermochronologic data is underscored by the review of the Software for Interpretation and Analysis of Thermochronologic Data (Chapter 22), summarized and compiled by Ehlers, for programs associated with the work of authors in this volume and others.

Description / Table of Contents: Paleoseismology has become an important component of seismic risk analysis, which is mandated for nuclear power plants, dams, waste repositories, and other critical structures. This book is the first in the English language to be devoted solely to paleoseismology. It summarizes the development of the field from the 1960s to the present, encompassing material that is currently widely dispersed in journal articles.

Description / Table of Contents: This book complements the Geological Society's Special Publication 362: Military Aspects of Hydrogeology. Generated under the auspices of the Society's History of Geology and Engineering Groups, it contains papers from authors in the UK, USA, Germany and Austria. Substantial papers describe some innovative engineering activities, influenced by geology, undertaken by the armed forces of the opposing nations in World War I. These activities were reactivated and developed in World War II. Examples include trenching from World War I, tunnelling and quarrying from both wars, and the use of geologists to aid German coastal fortification and Allied aerial photographic interpretation in World War II. The extensive introduction and other chapters reveal that ‘military geology’ has a longer history. These chapters relate to pre-twentieth century coastal fortification in the UK and the USA; conflict in the American Civil War; long-term ‘going’ assessments for German forces; tunnel repair after wartime route denial in Hong Kong; and tunnel detection after recent insurgent improvisation in Iraq.

Description / Table of Contents: Gullies on Mars resemble terrestrial gullies involved in the transport of abundant material down steep slopes by liquid water. However, liquid water should not be stable at the Martian surface. The articles in this volume present the two main opposing theories for Martian gully formation: climate-driven melting of surficial water-ice deposits and seasonal dry-ice sublimation. The evidence presented ranges from remote-sensing observations, to experimental simulations, to comparison with Earth analogues. The opposing hypotheses imply either that Mars has been unusually wet in the last few million years or that it has remained a cold dry desert – both with profound implications for understanding the water budget of Mars and its habitability. The debate questions the limits of remote-sensing data and how we interpret active processes on extra-terrestrial planetary surfaces, even beyond those on Mars, as summarized by the review paper at the beginning of the book.

Description / Table of Contents: Contents: 1 From Riemann manifolds to Riemann manifolds.- 2 From Riemann manifolds to Euclidean manifolds.- 3 Coordinates.- 4 Surfaces of Gaussian curvature zero.- 5 Sphere to tangential plane" : polar (normal) aspect.- 6 Sphere to tangential plane" : transverse aspect.- 7 Sphere to tangential plane : oblique aspect.- 8 Ellipsoid-of-revolution to tangential plane.- 9 Ellipsoid-of-revolution to sphere and from sphere to plane.- 10 Sphere to cylinder : polar aspect.- 11 Sphere to cylinder : transverse aspect.- 12 Sphere to cylinder : oblique aspect.- 13 Sphere to cylinder : pseudeo-cylindrical projections.- 14 Ellipsoid-of-revolution to cylinder : polar aspect.- 15 Ellipsoid-of-revolution to cylinder : transverse aspect.- 16 Ellipsoid-of-revolution to cylinder : oblique aspect.- 17 Sphere to cone : polar aspect.- 18 Sphere to cone : pseudo-conic projections.- 19 Ellipsoid-of-revolution to cone : polar aspect.- 20 Geodetic mapping.- 21 Datum problems.- A. Law and Order.- B. The inverse of a multivariate homogeneous polynomial.- C. Elliptic integrals.- D. Korn-Lichtenstein and d'Alembert-Euler equations.- E. Geodesics.- F. Mixed cylindric map projections.- G. Generalized Mollweide projection.- H. Generalized Hammer projection.- I. Mercator projection and polycylindric projection.- J. Gauss surface normal coordinates in geometry and gravity space.- Bibliography.- Index.

Description / Table of Contents: The Eastern Mediterranean region is a classic area for the study of tectonic processes and settings related to the development of the Tethyan orogenic belt. The present set of research and synthesis papers by Earth scientists from countries in this region and others provides an up-to-date, interdisciplinary overview of the tectonic development of the Eastern Mediterranean region from Precambrian to Recent. Key topics include continental rifting, ophiolite genesis and emplacement, continental collision, extensional tectonics, crustal exhumation and intra-plate deformation (e.g. active faulting). Alternative tectonic reconstructions of the Tethyan orogen are presented and discussed, with important implications for other regions of the world. The book will be an essential source of information and interpretation for academic researchers (geologists and geophysicists), advanced undergraduates and also for industry professionals, including those concerned with hydrocarbons, minerals and geological hazards (e.g. earthquakes).

Description / Table of Contents: Contents: Stochastische Prozesse. - Multiple lineare Regression. - Fourier-Transformation. - Faltung. - Entfaltung. - Exponentialanalyse. - Information und Wissen. - Zur Physik des Informationsgewinns. - Informationsmaße.

Description / Table of Contents: Contents: Vorbereitung geophysikalischer Messungen. - Magnetik.- Gravimetrie. - Geoelektrik. - Elektromagnetik. - Bodenradar. - Seismik. - Geothermik.- Radiometrie. - Aerogeophysik.- Bohrlochgeophysik. - Geophysikalische Penetrationssondierungen. - Milieusondenmessungen. - Petrophysik. - In-situ-Überwachung.

Description / Table of Contents: For over half a century neutron scattering has added valuable information about the structure of materials. Unlike X-rays that have quickly become a standard laboratory technique and are available to all modern researchers in physics, chemistry, materials and earth sciences, neutrons have been elusive and reserved for specialists. A primary reason is that neutron beams, at least so far, are only produced at large dedicated facilities with nuclear reactors and accelerators and access to those has been limited. Yet there are a substantial number of experiments that use neutron scattering. While earth science users are still a small minority, neutron scattering has nevertheless contributed valuable information on geological materials for well over half a century. Important applications have been in crystallography (e.g. atomic positions of hydrogen and Al-Si ordering in feldspars and zeolites, Mn-Fe-Ti distribution in oxides), magnetic structures, mineral physics at non-ambient conditions and investigations of anisotropy and residual strain in structural geology and rock mechanics. Applications range from structure determinations of large single crystals, to powder refinements and short-range order determination in amorphous materials. Zeolites, feldspars, magnetite, carbonates, ice, clathrates are just some of the minerals where knowledge has greatly been augmented by neutron scattering experiments. Yet relatively few researchers in earth sciences are taking advantage of the unique opportunities provided by modern neutron facilities. The goal of this volume, and the associated short course by the Mineralogical Society of America held December 7-9 in Emeryville/Berkeley CA, is to attract new users to this field and introduce them to the wide range of applications. As the following chapters will illustrate, neutron scattering offers unique opportunities to quantify properties of earth materials and processes. Focus of this volume is on scientific applications but issues of instrumental availabilities and methods of data processing are also covered to help scientists from such diverse fields as crystallography, mineral physics, geochemistry, rock mechanics, materials science, biomineralogy become familiar with neutron scattering. A few years ago European mineralogists spearheaded a similar initiative that resulted in a special issue of the European Journal of Mineralogy (Volume 14, 2002). Since then the field has much advanced and a review volume that is widely available is highly desirable. At present there is really no easy access for earth scientists to this field and a more focused treatise can complement Bacon's (1955) book, now in its third edition, which is still a classic. The purpose of this volume is to provide an introduction for those not yet familiar with neutrons by describing basic features of neutrons and their interaction with matter as well illustrating important applications. The volume is divided into 17 Chapters. The first two chapters introduce properties of neutrons and neutron facilities, setting the stage for applications. Some applications rely on single crystals (Chapter 3) but mostly powders (Chapters 4-5) and bulk polycrystals (Chapters 15-16) are analyzed, at ambient conditions as well as low and high temperature and high pressure (Chapters 7-9). Characterization of magnetic structures remains a core application of neutron scattering (Chapter 6). The analysis of neutron data is not trivial and crystallographic methods have been modified to take account of the complexities, such as the Rietveld technique (Chapter 4) and the pair distribution function (Chapter 11). Information is not only obtained about solids but about liquids, melts and aqueous solutions as well (Chapters 11-13). In fact this field, approached with inelastic scattering (Chapter 10) and small angle scattering (Chapter 13) is opening unprecedented opportunities for earth sciences. Small angle scattering also contributes information about microstructures (Chapter 14). Neutron diffraction has become a favorite method to quantify residual stresses in deformed materials (Chapter 16) as well as preferred orientation patterns (Chapter 15). The volume concludes with a short introduction into neutron tomography and radiography that may well emerge as a principal application of neutron scattering in the future (Chapter 17).

Description / Table of Contents: Medical Mineralogy and Geochemistry is an emergent, highly interdisciplinary field of study. The disciplines of mineralogy and geochemistry are integral components of cross-disciplinary investigations that aim to understand the interactions between geomaterials and humans as well as the normal and pathological formation of inorganic solid precipitates in vivo. Research strategies and methods include but are not limited to: stability and solubility studies of earth materials and biomaterials in biofluids or their proxies (i.e., equilibrium thermodynamic studies), kinetic studies of pertinent reactions under conditions relevant to the human body, molecular modeling studies, and geospatial and statistical studies aimed at evaluating environmental factors as causes for activating certain chronic diseases in genetically predisposed individuals or populations. Despite its importance, the area of Medical Mineralogy and Geochemistry has received limited attention by scientists, administrators, and the public. The objectives of this volume are to highlight some of the existing research opportunities and challenges, and to invigorate exchange of ideas between mineralogists and geochemists working on medical problems and medical scientists working on problems involving geomaterials and biominerals. Examples presented in this volume (Table of contents below) include the effects of inhaled dust particles in the lung (Huang et al. 2006; Schoonen et al. 2006), biomineralization of bones and teeth (Glimcher et al. 2006), the formation of kidney-stones, the calcification of arteries, the speciation exposure pathways and pathological effects of heavy metal contaminants (Reeder et al. 2006; Plumlee et al. 2006), the transport and fate of prions and pathological viruses in the environment (Schramm et al. 2006), the possible environmental-genetic link in the occurrence of neurodegenerative diseases (Perl and Moalem 2006), the design of biocompatible, bioactive ceramics for use as orthopaedic and dental implants and related tissue engineering applications (Cerruti and Sahai 2006) and the use of oxide-encapsulated living cells for the development of biosensors (Livage and Coradin 2006).

Description / Table of Contents: Contents: Simple calculations with MATLAB.- Writing scripts and functions.- Loopsand conditional statements.- Root finding.- Interpolation and extrapolation.- Matrices.- Numerical integration.- Solving differential equations.- Simulations and random numbers.- Appendices.- A mathematical introduction to matrices.- Glossary of useful terms.-Solutions to tasks.

Description / Table of Contents: Contents: 1. Introduction. 2.Oscillato Motion. 3. Calculus of Variations. 4. Integration ofEquations of Motion. 5. Orthogonal Functions and Expansions. 6.Electrostatics. 7. Boundary-Value Problems. 8. Magnetostatics. 9.Electric Circuits. 10. Waves. 11. Physical Optics. 12. SpecialRelativity. 13. Quantum Phenomena. 14. Schrodinger Equation in OneDimension I. 15. Schrodinger Equation in One Dimension II. 16.Schrodinger Equation in Three Dimensions. 17. QuantumStatistics. 18. General Relativity.

Description / Table of Contents: Contents: PART I: Geometry of crystal lattice.PART II:CLASSICAL DYNAMICS OF A CRYSTAL LATTICE. Mechanics of a one-dimensionalcrystal.General analysis of vibrations of monoatomiclattices.Vibrations of polyatomic lattices. Frequency spectrum and itsconnection with the Green's function. Acoustics of elasticssuperlattices: Phonon crystals.PART III: QUANTUM MECHANICS OFCRYSTALS. Quantization of crystal vibrations.Interaction of excitationsin a crystal. Quantum crystals.PART IV: DEFECTS.Pointdefects.Dislocations and disclinations. Linear crystaldefects.Localization of vibrations.Localization of vibrations nearextended defects.Elastic field of dislocations in a crystal. Dislocationdynamics.

Description / Table of Contents: Contents: Chapter 1. Handbook of Time Series Analysis: Introduction and Overview.Chapter 2. Nonlinear Analysis of Time Series Data. Chapter 3. Local and Cluster Weighted Modeling for time Series Prediction. Chapter 4. Deterministic and ProbabilisticForecasting in Reconstructed State Spaces.Chapter 5. Dealing with randomness in Biosignals.Chapter 6. Robust Detail-Preserving Signal Extraction.Chapter 7. Coupled Oscillators Approach in Analysis of Bivariate Data.Chapter 8. Nonlinear Dynamical Models from Chaotic Time Series: Methods and Applications.Chapter 9. Data-Driven Analysis of Nonstationary Brain Signals.Chapter 10. Synchronization Analysis and Recurrence in Complex Systems.Chapter 11. Detecting Coupling in the Presence of Noise and nonlinearity.Chapter 12. Linear Models for Multivariate Time Series.Chapter 13. Spatio-Temporal Modeling for Biosurveillance. Chapter 14. Graphical Modeling of Dynamic Relationships in Multivariate Time Series.

Description / Table of Contents: Contents: Mediterranean climatic environment. Processing and archiving of satellite an ancillary data. Radiative processes of the surface - atmosphere system; Primary level products. Higher level variables and their validation. From research to application.

Description / Table of Contents: Contents: Remote Sensing as a Tool for Urban Planning and Sustainability . - Automatic Land-Cover Classification Derived from High-Resolution IKONOS Satellite Imagery in the Urban Atlantic Forest of Rio de Janeiro, Brazil, by Means of an Object-Oriented Approach. -Advances in Urban Remote Sensing: Examples From Berlin (Germany).- Spatial Analysis of Urban Vegetation Scale and Abundance.- Urban Environmental Monitoring in Buenos Aires ; Determining Green Areas.- Challenges in Characterizing and Mitigating Urban Heat Islands ; A Role for Integrated Approaches Including Remote Sensing.- Phoenix, Arizona, USA: Applications of Remote Sensing in a Rapidly Urbanizing Desert Region.- Application of Remote Sensing and GIS Technique for Urban Environmental Management and Sustainable Development of Delhi, India.- Berlin (Germany) Urban and Environmental Information System: Application of Remote Sensing for Planning and Governance - Potentials and Problems.- Views of Chiang Mai: The Contributions of Remote-Sensing to Urban Governance and Sustainability.- 20 Years After Reforms: Challenges to Planning and Development in China's City-Regions and Opportunities for Remote Sensing.

Description / Table of Contents: Contents: Review of elements of structural geology.- Fundamental building blocksof structural interpretation.- Techniques of hand and computercontouring.- Definitions of thickness, thickness measurements,interpretation of isopach and isocore maps.- Geometry of folds.-Construction techniques for illustrative and predictive crosssections.- Recognition of faults and unconformities.- Building ofinternally consistent 3-D structural interpretations.- Dip-sequenceanalysis of folds and faults.- Quality control of maps and crosssections.- Concepts and techniques for structural validation,restoration, and prediction.- Derivations of the basic equations ofvector geometry.

Description / Table of Contents: Contents: Tectonic Faults: Agents of Change on a Dynamic Earth. - Fault Zones from Top to Bottom . - Nucleation and Growth of Fault Systems. - Seismic Fault Rheology and Earthquake Dynamics. - Continental Fault Structure and Rheology from the Frictional-to-Viscous Transition Downwards. - Group Report: Rheology of Fault Rocks and Their Surroundings. - Topography, Denudation, and Deformation: The Role of Surface Processes on Fault Evolution. - Constraining the Denudational Response to Faulting. - Surface Environmental Effects on and of Faulting. - Fluid Processes in Deep Crustal Fault Zones. - Deformation in the Presence of Fluids and Mineral Reactions: Effect of Fracturing and Fluid Rock Interaction on Seismic Cycles. - On the Effects of Melting on Faulting and Continental Deformation. - Fluids, Geochemical Cycles, and Mass Transport in Fault Zones.

Description / Table of Contents: Contents: 1 UNIVARIATE EXTREME VALUE THEORY 1.1 Order Statistics 1.2 Extreme value theory 1.3 Hazard, return period, and risk 1.4 Natural Hazards 2 MULTIVARIATE EXTREME VALUE THEORY 2.1 Multivariate Extreme Value Distributions 2.2 Characterizations of the domain of attraction 2.3 Multivariate dependence 2.4 Multivariate return periods 3 BIVARIATE ANALYSIS VIA COPULAS 3.1 2-Copulas 3.2 Archimedean copulas 3.3 Return periods via copulas 3.4 Tail dependence 4 MULTIVARIATE ANALYSIS VIA COPULAS 4.1 Multivariate copulas 4.2 Archimedean copulas 4.3 Conditional mixtures 5 EXTREME VALUE ANALYSIS VIA COPULAS 5.1 Extreme Value copulas 5.2 Dependence function 5.3 Tail dependence.

Description / Table of Contents: Contents: 1 Introduction.- 2 Coordinate and Time Systems.- 3 Satellite Orbits.- 4 GPS Observables.- 5 Physical Influences of GPS Surveying.- 6 GPS Observation Equations and Equivalence Properties.- 7 Adjustment and Filtering Methods.- 8 Cycle Slip Detection and Ambiguity Resolution.- 9 Parameterisation and Algorithms of GPS Data Processing.- 10 Applications of GPS Theory and Algorithms.- 11 Perturbed Orbit and its Determination.- 12 Discussions.- Appendix 1: IAU 1980 Theory of Nutation.- Appendix 2: Numerical Examples of the Diagonalisation of the Equations.- References.- Subject Index.

Description / Table of Contents: Contents: Statistical Concepts.- Statistical Methods.- Bayesian Methods.- Analysis of Time Series.- Rule Induction.- Neural Networks.- Fuzzy Logic.- Stochastic Search Methods.- Systems and Applications.

Description / Table of Contents: Contents: Part I. Planetary Perspective: 1. Origin and early history; 2. Comparative planetology; 3. Building blocks of planets; Part II. Earth: The Dynamic Planet: 4. Outer shells of Earth; 5. Eclogite engine; 6. Shape of the Earth; 7. Convection and complexity; Part III. Radial and Lateral Structure: 8. Lets take it from the top; crust and upper mantle; 9. A laminated lumpy mantle; 10. The bowels of the Earth; 11. Geotomography; heterogeneity of the mantle; Part IV. Sampling Earth: 12. Statistics and other damned lies; 13. Making an Earth; 14. Magmas - windows into the mantle; 15. The hard rock cafe; 16. Noble gas isotopes; 17. The other isotopes; Part V. Mineral Physics: 18. Elasticity and solid state geophysics; 19. Dissipation; 20. Anisotropy; fabric of the mantle; 21. Nonelastic and transport properties; 22. Squeezing; phase changes and mantle mineralogy; Part VI. Origin and Evolution of Layers and Blobs: 23. The upper mantle; 24. The nature and cause of mantle heterogeneity; 25. Crystallization of the mantle; Part VII. Energetics: 26. Terrestrial heat flow; 27. Thermal history.

Description / Table of Contents: Contents: 1. Preliminaries; 2. Solution of linear algebraic equations; 3. Interpolation and extrapolation; 4. Integration of functions; 5. Evaluation of functions; 6. Special functions; 7. Random numbers; 8. Sorting and selection; 9. Root finding and nonlinear sets of equations; 10. Minimization or maximization of functions; 11. Eigensystems; 12. Fast Fourier transform; 13. Fourier and spectral applications; 14. Statistical description of data; 15. Modeling of data; 16. Classification and inference; 17. Integration of ordinary differential equations; 18. Two point boundary value problems; 19. Integral equations and inverse theory; 20. Partial differential equations; 21. Computational geometry; 22. Less-numerical algorithms; References.

Description / Table of Contents: Over 25 years ago, Volume 9 of Reviews in Mineralogy: Amphiboles and Other Hydrous Pyriboles seemed to contain all that was possible to know about this group of fascinating minerals. The subsequent twenty-five years have shown that this assessment was wrong: Nature was keeping a lot in reserve, and has since revealed considerable new complexity in the constitution and behavior of amphiboles. Some of the advances in knowledge have been due to the use of new experimental techniques, some have been due to the investigation of hitherto neglected rock-types, and some have been due to the development of new ideas. The identification and systematic investigation of variable LLE (Light Lithophile Elements), particularly Li and H, led to the identification of several new amphibole species and the recognition that variable Li and H play an important role in chemical variations in amphiboles from both igneous and metamorphic parageneses. In turn, this work drove the development of microbeam SIMS to analyze LLE in amphiboles. Detailed mineralogical work on metasyenites showed hitherto unexpected solid-solution between Na and Li at the M(4) site in monoclinic amphiboles, a discovery that has upset the current scheme of amphibole classification and nomenclature and initiated new efforts in this direction. Systematic and well-planned synthesis of amphiboles, combined with careful spectroscopy, has greatly furthered our understanding of cation and anion order in amphiboles. The use of bond-valence theory to predict patterns of SRO (Short-Range Order) in amphiboles, and use of these predictions to understand the infrared spectra of well-characterized synthetic-amphibole solid-solutions, has shown that SRO is a major feature of the amphibole structure, and has resulted in major advances in our understanding of SRO in minerals. There has been significant progress relating changes in amphibole composition and cation ordering to petrogenetic conditions and trace-element behavior. Work on the nature of fibrous amphiboles and their toxicity and persistence in living organisms has emphasized the importance of accurate mineralogical characterization in environmental and health-related problems. The current volume has taken a different approach from previous volumes concerned with major groups of rock-forming minerals. Some of the contents have previously been organized by the investigative technique or groups of similar techniques: crystal-structure refinement, spectroscopy, TEM etc. Here, we have taken an approach that focuses on aspects of amphiboles rather than experimental techniques: crystal chemistry, new compositions, long-range order, short-range order etc., and all experimental results germane to these topics are discussed in each chapter. The intent of this approach is to focus on amphiboles, and to emphasize that many techniques are necessary to fully understand each aspect of the amphiboles and their behavior in both natural and industrial processes.

Description / Table of Contents: Contents: 1. Introduction; 2. Oscillations and teleconnections; 3. Tropical climates; 4. Middle latitude climates; 5. Climate of the polar realms; 6. Post-glacial climatic change and variability; 7. Urban climates; 8. Human response to climate change; 9. Model interpretation of climate signals; 10. Conclusions and the future of climate research

Description / Table of Contents: Contents: Part I: Data Issues. Part II: Database Trends and Challenges. Part III: Visualization. Part IV: Knowledge Elicitation. Part V: Spatial Analysis. Part VI GIS and Society. Part VII: Future Trends and Challenges. Index

Description / Table of Contents: Presents a description of major aspects of natural gas hydrates. This book includes a historical perspective and overview of gas hydrates, discussion of the structural and physical properties of natural gas hydrates, and the comparison of these properties between different hydrate structures and ice. Contents: Overview and Historical Perspective. Molecular Structures and Similarities to Ice. Kinetics of Hydrate Formation. Fundamental Phase Equilibria for Natural Gas Hydrates. A Statistical Thermodynamic Approach to Hydrate Phase Equilibria. Experimental Methods and Measurements of Hydrate Properties. Hydrate in the Earth. Hydrates in Natural Gas Production, Transportation, and Processing.

Description / Table of Contents: Hydrogen may be the most abundant element in the universe, but in science and in nature oxygen has an importance that is disproportionate to its abundance. Human beings tend to take it for granted because it is all around us and we breathe it, but consider the fact that oxygen is so reactive that in a planetary setting it is largely unstable in its elemental state. Were it not for the constant activity of photosynthetic plants and a minor amount of photo dissociation in the upper atmosphere, we would not have an oxygen-bearing atmosphere and we would not be here. Equally, the most important compound of oxygen is water, without which life (in the sense that we know it) could not exist. The role of water in virtually all geologic processes is profound, from formation of ore deposits to igneous petrogenesis to metamorphism to erosion and sedimentation. In planetary science, oxygen has a dual importance. First and foremost is its critical role in so many fundamental Solar System processes. The very nature of the terrestrial planets in our own Solar System would be much different had the oxygen to carbon ratio in the early solar nebula been somewhat lower than it was, because elements such as calcium and iron and titanium would have been locked up during condensation as carbides, sulfides and nitrides and even (in the case of silicon) partly as metals rather than silicates and oxides. Equally, the role of water ice in the evolution of our Solar System is important in the early accretion and growth of the giant planets and especially Jupiter, which exerted a major control over how most of the other planets formed. On a smaller scale, oxygen plays a critical role in the diverse kinds of physical evolution of large rocky planets, because the internal oxidation state strongly influences the formation and evolution of the core, mantle and crust of differentiated planets such as the Earth. Consider that basaltic volcanism may be a nearly universal phenomenon among the evolved terrestrial planets, yet there are basalts and basalts. The basalts of Earth (mostly), Earth's Moon, Vesta (as represented by the HED meteorites) and Mars are all broadly tholeiitic and yet very different from one another, and one of the primary differences is in their relative oxidation states (for that matter, consider the differences between tholeiitic and calc-alkaline magma series on Earth). But there is another way that oxygen has proven to be hugely important in planetary science, and that is as a critical scientific clue to processes and conditions and even sources of materials. Understanding the formation and evolution of our Solar System involves reconstructing processes and events that occurred more than 4.5 Ga ago, and for which the only contemporary examples are occurring hundreds of light years away. It is a detective story in which most of the clues come from the laboratory analysis of the products of those ancient processes and events, especially those that have been preserved nearly unchanged since their formation at the Solar System's birth: meteorites; comets; and interplanetary dust particles. For example, the oxidation state of diverse early Solar System materials ranges from highly oxidized (ferric iron) to so reducing that some silicon exists in the metallic state and refractory lithophile elements such as calcium exist occur in sulfides rather than in silicates or carbonates. These variations reflect highly different environments that existed in different places and at different times. Even more crucial has been the use of oxygen 3-isotope variations, which began almost accidentally in 1973 with an attempt to do oxygen isotope thermometry on high-temperature solar nebula grains (Ca-, Al-rich inclusions) but ended with the remarkable discovery of non-mass-dependent oxygen isotope variations in high-temperature materials from the earliest Solar System. The presolar nebula was found to be very heterogeneous in its isotopic composition, and virtually every different planet and asteroid for which we have samples has a unique oxygen-isotopic fingerprint. The idea for this book originated with Jim Papike, who suggested the idea of a study initiative (and, ultimately, a published volume) focused on the element that is so critically important in so many ways to planetary science. He recognized that oxygen is such a constant theme through all aspects of planetary science that the proposed initiative would serve to bring together scientists from a wide range of disciplines for the kind of cross-cutting dialogue that occurs all too rarely these days. In this sense the Oxygen Initiative is modeled on the Basaltic Volcanism Study Project, which culminated in what remains to this day a hugely important reference volume (Basaltic Volcanism Study Project 1981). After obtaining community input and feedback, primarily through the Curation and Analysis Planning Team for Extraterrestrial Materials (CAPTEM) and the Management Operations Working Group for NASA's Cosmochemistry Program, a team of scientists was assembled who would serve as chapter writing leads, and the initiative was formally proposed to and accepted by the Lunar and Planetary Institute (LPI; Dr. Stephen Mackwell, Director) for sponsorship. A formal proposal was then submitted to and approved by the Mineralogical Society of America to publish the resulting volume in the Reviews in Mineralogy and Geochemistry (RiMG) series. Three open workshops were held as preludes to the book: Oxygen in the Terrestrial Planets, held in Santa Fe, NM July 20-23, 2004; Oxygen in Asteroids and Meteorites, held in Flagstaff, AZ June 2-3, 2005; and Oxygen in Earliest Solar System Materials and Processes (and including the outer planets and comets), held in Gatlinburg, TN September 19-22, 2005. The workshops were each organized around a small number of sessions (typically 4-6), each focusing on a particular topic and consisting of invited talks, shorter contributed talks, and ample time for discussion after each talk. In all of the meetings, the extended discussion periods were lively and animated, often bubbling over into the breaks and later social events. As a consequence of the cross-cutting approach, the final book spans a wide range of fields relating to oxygen, from the stellar nucleosynthesis of oxygen, to its occurrence in the interstellar medium, to the oxidation and isotopic record preserved in 4.56 Ga grains formed at the Solar System's birth, to its abundance and speciation in planets large and small, to its role in the petrologic and physical evolution of the terrestrial planets.

Description / Table of Contents: 1: Fundamentals. 2. Governing equations for motion and deformation of block systems and heat transfer. 3. Constitutive models of rock fractures and rock masses - the basics. 4. Fluid flow and coupled hydro-mechanical behaviour of rock fractures. Part 2: Fracture System Characterization and Block Model Construction. 5. Basics of characterization of fracture systems - field mapping and stochastic simulations. 6. Basics of combinatorial topology for block system representation. 7. Numerical techniques for block system construction. Part 3: DEM approaches. 8. Explicit discrete element method for block systems the distinct element method. 9. Implicit Discrete Element Method for block systems - discontinuous deformation analysis (DDA). 10. Discrete Fracture Network (DFN) method. 11. Discrete Element Methods for granular materials. Part 4: Application Studies. 12. Case studies of Discrete Element Methods in geology, geophysics and rock engineering.

Description / Table of Contents: Modern concepts on processes of seismically active parts of converging plate interfaces are derived from lab experiments, theoretical inferences, and geophysical observations, which have either poor resolution, or are strongly dependent on insufficiently constrained assumptions. Therefore, we studied a continuous exposure of an ancient subduction channel in the depth range of its former seismogenic zone in the Central Alps of Europe. This subduction channel developed due to Late Cretaceous - Early Tertiary subduction and accretion of the South Penninic lower plate underneath the Adriatic upper plate (Austroalpine domain). Additionally, we include information from Southern Chile, where material, which formerly underwent deformation within a subduction channel, was exhumed to the surface by large scale basal accretion. There, we concentrated on the formation of mineralized vein systems. However, we mainly focused on the exhumed plate interface zone in the European Alps. During subduction of the South Penninic ocean, material from both the continental upper plate and the oceanic lower plate was progressively involved into the subduction factory and transported downwards, forming either the shaly and serpentinic matrix of the subduction mélange, or competent clasts. Rb/Sr deformation ages for mylonitized rocks of the South Penninic mélange and for deformed Austroalpine basement shed light on the pre-Alpine and Alpine deformation history along the suture, as well as on the mode of syn-subduction interplate mass transfer. According to our Rb/Sr deformation ages and our structural data, the latest increment of subduction-related deformation occurred at ~50 Ma, and is characterized by a roughly top-W direction of tectonic transport. Identical Rb/Sr ages for pervasively deformed Austroalpine and South Penninic rocks point to tectonic erosion of the upper plate during subduction. This is also evidenced by the presence of upper plate clasts in the subduction mélange, and from the syn-subduction evolution of Gosau forearc basins pointing to tectonic erosion as prevailing mass transfer mode during the time of subduction. Lack of a metamorphic contrast between the South Penninic mélange and the Austroalpine upper plate favors exhumation of the suture zone due to a combination of tectonic underplating and surface erosion. The end of sedimentation in the forearc Gosau basins is contemporaneous with basal accretion of the South Penninic mélange and the Middle Penninic units at ~50 Ma. Therefore, we hypothesize a causal link of both processes, with the change from tectonic erosion to basal accretion caused by underplating of subducted material, which is responsible for a regional uplift leading to inversion of the forearc basins. The end of subduction-related deformation is most likely caused by locking of the South Penninic paleosubduction interface due to underplating of the Middle Penninic micro-continent, so that the active subduction interface is relocated into the new Middle Penninic footwall. Pseudotachylytes along a restricted segment of the upper plate base delineated by ca. 200°C updip and ca. 300°C downdip - define the limits of the unstable slip region within the fossil seismogenic coupling zone. Our 40Ar/39Ar ages constrain the generation of pseudotachylytes during a time span between 60 Ma to 80 Ma. The heterogeneous texture of the ultra fine grained pseudotachylyte groundmass is composed of a mixture of amphibole, feldspar and biotite, as well as of incorporated rock fragments and single minerals of comparable size. Due to the temporal similarity between subduction and pseudotachylyte formation, and the fact that the pseudotachylytes occur subparallel to the main thrust where Austroalpine rocks were overthrust onto South Penninic rocks, we interpret the generation of pseudotachylytes to be related to unstable slip processes occurring along the plate interface zone during subduction.The zone of unstable slip coincides with a domain of intense formation of foliation-parallel mineralized veins with partly blocky minerals in the subduction mélange. We suggest that the mineralized veins reflect seismic failure in the mélange due to their similarity in spatial distribution and textures compared to pseudotachylytes. Mineralized veins, and brittle fractures continue into the conditionally stable region below, maybe indicating a domain of slow earthquakes and non-volcanic tremors as recently discovered for this depth range along many active convergent margins. The conditionally stable zone above the unstable slip area is devoid of mineralized veins, but displays ample evidence of fluid-assisted processes like the deeper zone: solution-precipitation creep and dehydration reactions in the mélange matrix, hydration and sealing of the base of the upper plate. Seismic rupture is possibly expressed by ubiquitous localized deformation zones. Fluids are most likely provided by dehydration during subduction of sedimentary material from different sources. This is indicated by elevated Sr isotope signatures of marine (meta-) carbonates from the South Penninic mélange, which are caused by the interaction of syn-subduction fluids with old continental crust.In summary, the exposed plate interface has experienced flow and fracturing over an extended period of time reflecting a multistage evolution, but resembles active convergent plate margins in terms of e.g. sediment input, earthquake distribution, fluid circulation, and possible slow slip events and associated tremors.