ALBERT

Notes: Abstract Adsorption refrigerators are a particular type of refrigerator in which compression is avoided, and in a sense replaced by adsorption. No mobile parts are needed; the energy input, instead of being mechanical, is thermal and is used to achieve desorption. Such machines have a cyclic operation, made of successive adsorption/evaporation and of desorption/condensation steps. The transient operation of adsorption refrigerators is a relatively recent subject of research. The modeling of the adsorber is the key point of such studies, because of the complex coupled heat and mass transfer phenomena that occur during the cycle. The present work therefore presents a study of an annular type adsorber which is intended to account for transient temperatures observed experimentally. The equipment in which the experiments were performed and which uses alcohol adsorption on activated carbon is briefly described, and its operating cycle described, along with typical experimental observations of pressure and temperature transients. A model of the adsorber unit is proposed which accounts for the coupling of adsorption and heat transfer, and describes mass-transfer in the annular adsorbent layer as a global diffusional mechanism with temperature dependent parameters. This model correctly predicts, qualitatively and semi-quantitatively, the observed trends of the temperature changes. Finally, various aspects of the performances are discussed.

Notes: Abstract The viability of irrigated systems in the Senegal River Valley is being brought into question today due to their under‐utilization. We assume that their viability depends largely on the way their different components behave and interact. We therefore sought to examine in greater depth today's knowledge of the structure of these systems and activities performed within them. This led to the development of a multi‐agent system model, a kind of virtual irrigated system, with a special focus on rules in use for access to credit, water allocation and cropping season assessment as well as organization and coordination of farmers. The purpose of this paper is to show how this kind of tool is relevant to the study of irrigated systems' viability. As an example it is used to examine the influence of existing social networks on the viability of irrigated systems.

Notes: Abstract Results are presented of optical emission spectroscopy (OES) application asa control tool to improve fly-ash plasma vitrification. A twin-torch plasmasystem has been used for the fly-ash processing, and a new OES method hasexamined metallic vapors above the melt. The method allows the study ofnonhomogeneous optically thin plasmas exhibiting a symmetry plane withoutsophisticated tomographic systems. The dc arc torches are mounted above acold crucible filled with a synthetic glass. The arc intensity is from200 to 400 Å. Argon is introduced into the torches along the cathodeand the anode, while argon, oxygen or hydrogen are injected through thelance between the torches. Local plasma temperatures above the melt havebeen evaluated using measured relative intensities of spectral lines ofthe plasma-forming gas. Metallic vapor concentration in the plasma isdeduced from the intensity ratio of the metal–gas spectral lines. Leadoxide has been used to study heavy-metal behavior at the fly-ash plasmavitrification. Distribution of the lead along the crucible surface,depending on the plasma-forming gas composition as well as the concentrationevolution with time, have been examined. The elemental analysis of theresultant glass has been measured by scanning electron microscopy (SEM)with energy-dispersive spectrometry (EDS). A predictive model has beenadapted to simulate the noncongruent vaporization of heavy metals from themelt. According to the data obtained, steep variations of the volatility ofthe elements depend strongly on reducing properties of gases controllingthe plasma composition near the melted surface. In addition, the melttemperature and the redox potential of the gas phase are found to be themost critical parameters.

Notes: Abstract The volatilization of quartz in a transferred arc plasma followed byquench and recondensation is a promising route to the production offumed silica. In this work, an existing model of a transferred arcwas modified and combined with a newly developed model of a moltensilica anode to predict the behavior of a transferred arc evaporatoras a function of current and plasma gas flow rate. The model predictstemperature, current, and flow fields in both the plasma and anode aswell as evaporation rates. Although quantitative agreement withexperimental results was not possible because of insufficient propertydata for silica at high temperature, the results were within an orderof magnitude of those measured experimentally. The model developed isuseful for the design and scaleup of this type of reactor.

Notes: Abstract Based on the description of shear horizontal (SH) wave propagation in arbitrarily oriented transversely isotropic media, radiation characteristics of ultrasonic transducers for this wave type are determined. The radiated wavefields are obtained by point source superposition, making use of an analytical relationship for the wave propagation direction as a function of the spatial coordinates. Approximate formulae are given for the radiation characteristics of circular and rectangular transducers in the far-field, which are in a form similar to the isotropic material case. Focusing on transversely isotropic weld metal specimens and unidirectional composites, numerical evaluation is performed for normal-incidence probes as well as for electromagnetic acoustic transducers.

Notes: Abstract Large-scale steady-state groundwater flow in atoll carbonate platforms results from temperature and salinity-induced density gradients. Atolls are built on top of a basaltic substrate that provides geothermal heating from beneath. Moreover, they are immersed in the tropical ocean where temperature decreases rapidly with depth. Groundwater circulation in these platforms has long been associated with the geothermal heat flux because it is capable of generating inward and upward flow of oceanic origin water by buoyancy effects. This study shows that hydraulic circulation occurs even in the absence of a geothermal flux because the combination of the cold subsurface ocean waters with the warm surface conditions is sufficient to maintain a convection cell within the carbonate platform. Using a one-dimensional analytical model, validated by more sophisticated two-dimensional simulations, we can investigate the interaction between these two driving forces. The flow rate inside the platform is, in fact, a function of the ratio of the geothermal flux to the temperature gradient in the ocean. It increases with the geothermal flux but decreases with the oceanic temperature gradient. This one-dimensional model also shows that taking salinity effects on density into account increases the flow rates transiting through the platform by a third.

Notes: Abstract We have been interested in Automatic Guided Vehicles (AGV) for several years. In this paper, we synthesize controllers for AGV applications using monocular vision. In particular, we are interested in road following and direction change tasks, and in analyzing the influence of extrinsic camera parameter perturbations on vehicle behavior. We use the bicycle as the kinematic vehicle model, and we choose the position of the white band on the road as the sensor signal. We define an interaction between the camera, which is mounted inside the vehicle, and the white band detected in the image space. Using this kind of interaction, we present how to use a pole assignment technique to solve the servoing task. We show the simulation and experimental results (1/10 scale demonstrator) with and without perturbations. We then investigate the use of a robust controller to slow down the effect of perturbations on the behavior of the vehicle.

Notes: Abstract This paper describes a novel knowledge-based approachfor helping workflow process designers andparticipants better manage the exceptions (deviationsfrom an ideal collaborative work process caused byerrors, failures, resource or requirements changesetc.) that can occur during the enactment of aworkflow. This approach is based on exploiting ageneric and reusable body of knowledge concerning whatkinds of exceptions can occur in collaborative workprocesses, and how these exceptions can handled(detected, diagnosed and resolved). This work buildsupon previous efforts from the MIT Process Handbookproject and from research on conflict management incollaborative design.

Notes: Abstract Integrated flow modeling is the combination of a traditional flow simulator with a petrophysical model. By combining a petrophysical model with a traditional flow model, it is possible to perform calculations that improve our ability to monitor fluid movement in porous media. This paper outlines the formulation of an integrated flow model IFLO and its multi-variable, Newton–Raphson IMPES solution procedure. The benefits of integrated flow modeling and the underlying principles involved in the integration of a flow model with a petrophysical model are presented. Results from the IFLO model are used to illustrate the principles.

Notes: Abstract The recently developed natural radon tracer method has potential as a rapid, low‐cost, nondestructive, and noninvasive method for quantifying NAPL contamination. In the subsurface, radon‐222 (radon) is produced by the decay of naturally occurring radium‐226 contained in the mineral fraction of aquifer solids. In groundwater radon occurs as a dissolved gas, with a half‐life of 3.83 days. In the absence of NAPL, the radon concentration in groundwater quickly reaches a maximum value that is determined by the mineral composition of the aquifer solids, which controls the rate of radon emanation. In the presence of NAPL, however, the radon concentration in the groundwater is substantially reduced due to the preferential partitioning of radon into the organic NAPL phase. A simple equilibrium model and supporting laboratory studies show the reduction in radon concentration can be quantitatively correlated with residual NAPL saturation. Thus, by measuring the spatial distribution in radon it may be possible to identify locations where residual NAPL is present and to quantify the NAPL saturation. When the basic processes of partitioning, radon emanation from the aquifer solids, and first‐order decay are incorporated into an advective/dispersive transport model, good agreement is obtained with the results of laboratory and field experiments. Model sensitivity analyses shows many factors can contribute to the radon concentration response, including the length of the NAPL zone, NAPL saturation, groundwater velocity, porosity, and radon emanation. Thus, care must be taken when applying the radon method to locate and quantify NAPL contamination in the subsurface.

Notes: Abstract Peat is an alternative filter medium for the treatment of various waste streams including septic tank effluent. The water holding capacity and adsorption capacity of peat make it a favorable filter medium over sand or gravel which are commonly used as the filter medium for the drainage field of septic systems. This paper presents the results of a field study to evaluate the hydraulics of a peat filter used to treat the septic tank effluent from a public school west of Ottawa, Canada. An experimental box was placed within the filter during its construction to provide access to the vertical profile of the peat layer. The filter is periodically pulsed with septic tank effluent, which is distributed over the top of the filter and flows vertically through the peat. The filter was instrumented with tensiometers and transducers to monitor the pore water pressures in response to a pulse of septic tank effluent. An in-depth study of the hydraulics of the system was completed. The soil moisture retention curve and the hydraulic conductivity as a function of density were determined in laboratory experiments. A one-dimensional unsaturated flow model was used to predict the pressure response due to a pulse. A comparison of the field and model results illustrates the impact of the density variations, and the corresponding hydraulic conductivity variations, on the model predictions. The compaction of the peat is an important design consideration for the filter since it directly impacts the flow characteristics and the hydraulic retention time within the filter.

Notes: Abstract Ecosystem Management (EM) is a new holistic approach to the management of natural resources. It integrates the scientificknowledge on ecological interrelationships and the complex socioeconomic and political frame of values, aiming at the long-term sustainability of a region, i.e., the ecosystem. Itincludes the human, biological and natural dimensions, and canregulate the internal structures and functions of the ecosystem,and the inputs and outputs from it, so that solutions to development and protection problems can be achieved and be socially well-accepted. It has been given attention since 1991,mainly in the U.S.A., where the existing legal framework formeda basis for EM. The former experience of programs based on the traditional methods of management, the goal of sustainable development stated by many governmental, public or private agencies, and the advent of scientific knowledge, permitted the development of a theoretical basis for EM. Today, a significant number of EM programs have been established and are in progressin the U.S.A. Here the concept, general principles and methodology of EM are reviewed, and the EM program in the Stateof Florida in the U.S.A. is presented, which is considered a successful case study. In addition, the examples of managementof two very important ecosystems in Northern Greece are critically presented for comparison, in order to evaluate if they have EM characteristics.

Notes: Abstract Two-dimensional, vertically-averaged hydrodynamic and sediment transport models were developed and applied as part of a PCB fate and transport modeling study of Thompson Island Pool (TIP), Upper Hudson River. Mechanistic formulations were used to simulate cohesive and non-cohesive suspended load transport; site-specific data were extensively used to determine model inputs. This modeling approach is compared and contrasted to non-mechanistic solids transport sub-models used in other contaminant fate studies. A minimum number of model parameters were adjusted to calibrate the sediment transport model using data collected during the 1994 spring flood. The model was validated during the 1997 spring flood and for a 22-year (1977–1998) period. Successful calibration and validation of the model showed that: (1) deposition and resuspension processes were realistically and accurately formulated in the model; (2) the model is an effective diagnostic tool for quantitatively evaluating net deposition and erosion from various areas of TIP; and (3) sediment transport results can be coupled with a PCB fate model with a high degree of confidence.

Notes: Abstract The development, testing and application of a dynamic two-dimensional (longitudinal-vertical) mass balance model for dissolved oxygen (DO) and chlorophyll (Chl) for rivers is documented that for the first time accommodates both the oxygen demand and filtering effects of zebra mussels. The test system is a phytoplankton-rich section (∼ 15 km long) of the Seneca River, NY, that is believed to represent an upper bound of the impact of this exotic invader. Changes in common measures of water quality of the river brought about by the zebra mussel invasion are reviewed and related longitudinal patterns in DO, Chl, and Secchi disc transparency are documented. Model testing is supported by comprehensive measurements of DO, Chl, and various forcing conditions over a three-month period, and independent determinations of several model coefficients. Wide variations in the areal consumption rate of DO (ZOD; g·m−2·d−1) and filtering rate (m3·m−2·d−1) of zebra mussels, as determined through model calibration, occurred over the study period. Values of ZOD in areas with dense zebra mussel populations at times (e.g., 〉 50 g·m−2·d−1) were an order of magnitude greater than the sediment oxygen demand associated with organically enriched deposits. The value of determinations of these fluxes from model calibration procedures is evaluated within the context of the limitations of protocols presently available to support independent specification of these rates. Model analyses are conducted to evaluate the relative magnitude of source and sink processes for DO and Chl, the potential operation and implications of feedback from low DO levels on oxygen consumption by zebra mussels, and the sensitivity of model simulations to selected sources of uncertainty and variability. Model projections of oxygen resources of the river are presented in a probabilistic format in evaluating reductions in zebra mussel biomass that would be necessary to eliminate violations of standards and regain assimilative capacity.

Notes: Abstract The statistical distribution of von Mises stress in the trabeculae of human vertebral cancellous bone was estimated using large-scale finite element models. The goal was to test the hypothesis that average trabecular von Mises stress is correlated to the maximum trabecular level von Mises stress. The hypothesis was proposed to explain the close experimental correlation between apparent strength and stiffness of human cancellous bone tissue. A three-parameter Weibull function described the probability distribution of the estimated von Mises stress (r2) 〉 0.99 for each of 23 cases). The mean von Mises stress was linearly related to the standard deviation (r2=0.63) supporting the hypothesis that average and maximum magnitude stress would be correlated. The coefficient of variation (COV) of the von Mises stress was nonlinearly related to apparent compressive strength, apparent stiffness, and bone volume fraction (adjusted r2=0.66, 0.56, 0.54, respectively) by a saturating exponential function [COV=A+B exp(−x/C)]. The COV of the stress was higher for low volume fraction tissue (〈0.12) consistent with the weakness of low volume fraction tissue and suggesting that stress variation is better controlled in higher volume fraction tissue. We propose that the average stress and standard deviation of the stress are both controlled by bone remodeling in response to applied loading. © 2000 Biomedical Engineering Society. PAC00: 8719Rr

Notes: Abstract We explore a computationally efficient method of simulating realistic networks of neurons introduced by Knight, Manin, and Sirovich (1996) in which integrate-and-fire neurons are grouped into large populations of similar neurons. For each population, we form a probability density that represents the distribution of neurons over all possible states. The populations are coupled via stochastic synapses in which the conductance of a neuron is modulated according to the firing rates of its presynaptic populations. The evolution equation for each of these probability densities is a partial differential-integral equation, which we solve numerically. Results obtained for several example networks are tested against conventional computations for groups of individual neurons. We apply this approach to modeling orientation tuning in the visual cortex. Our population density model is based on the recurrent feedback model of a hypercolumn in cat visual cortex of Somers et al. (1995). We simulate the response to oriented flashed bars. As in the Somers model, a weak orientation bias provided by feed-forward lateral geniculate input is transformed by intracortical circuitry into sharper orientation tuning that is independent of stimulus contrast. The population density approach appears to be a viable method for simulating large neural networks. Its computational efficiency overcomes some of the restrictions imposed by computation time in individual neuron simulations, allowing one to build more complex networks and to explore parameter space more easily. The method produces smooth rate functions with one pass of the stimulus and does not require signal averaging. At the same time, this model captures the dynamics of single-neuron activity that are missed in simple firing-rate models.

Notes: Abstract Five anaerobic proteolytic bacteria were isolated from water bodies of Leh, India, where the ambient temperature varies from −25 to 25 °C. Isolates showed growth at all temperatures ranging from 5 to 37 °C except SPL-4 and SPL-5 which showed no growth at 5 °C. The cultures could grow and produce proteases on various protein substrates and the yield varied with the substrates. Two of the cultures showed the presence of spores. Acetate was the dominant VFA during hydrolysis of protein substrates.

Notes: Abstract Common black rubber stoppers, made from natural rubber and styrene–butadiene, may cause a loss of hydrogen sulphide from aqueous media and impede the growth of sulphate-reducing bacteria under thermophilic conditions.

Notes: Abstract Rhizopus microsporus var. microsporus and var. oligosporus are used in the manufacture of various Asian fermented foods (tempe, black oncom, sufu). In view of solid-substrate fermentation (SSF) control, mycelial growth of strains of both varieties was tested for sensitivity to fluctuations of temperature, water activity and interstitial gas composition. This was achieved by measuring radial growth as well as biomass dry weight of pre-germinated microcolonies on defined media. The optimum conditions were temperature 40 °C, a w 0.995 and a gas composition of air for the growth of both strains on a model medium. Whereas radial growth rates of var. microsporus and var. oligosporus were similar, biomass growth rates of var. oligosporus were higher than those of var. microsporus under optimum conditions. The temperature-dependent growth of Rhizopus spp. at a w 〉 0.98 could be described by the Ratkowsky Equation. Carbon dioxide (5–10% v/v) inhibited the growth of Rhizopus spp. at non-limiting levels of oxygen. The two strains were able to grow at low (0.5% v/v) oxygen levels, but the mycelial density was rather low. No interrelation of water activity and gas composition was observed, but at high water activity the fungi were more sensitive to changes of temperature. The implications for process control are discussed.

Notes: Abstract The Kyoto Protocol requires the U.S.to reduce the rate of emissions of six greenhousegases (GHG) to 93% of their 1990 rate and to achievethis target by the 2008 to 2012 commitment period. This study assesses the magnitude of change needed inthe U.S. economy and, specifically, in the U.S. energysector, to achieve and maintain the target establishedby the Kyoto Protocol. A simple carbon (C)emissions-energy model is explained in this analysisusing four key variables. Current and future trendsin C emissions are explained by: the carbon/energy(C/E) ratio, Gross Domestic Product growth, energyprices and an energy trend variable. Potential GHGmitigation policy actions affect C emissionsindirectly by affecting at least one of these keyvariables. The analysis concludes that reducingfossil energy use in the U.S. to meet the Kyoto GHGemissions reduction target would be very costly. Technological progress that reduces C emissions wouldnot be fully sufficient without prematurely abandoningproductive capital equipment. Energy price increasesof about 14% per year, or declines in economic growthof almost 5% per year, could reduce energy demand andassociated C emissions enough to achieve the terms ofthe Kyoto Protocol.

Notes: Abstract In this manuscript we describe an introductory astronomy course for undergraduate students in which we moved from the large-lecture format to one in which students were immersed in a technologically-rich, inquiry-based, participatory learning environment. Specifically, undergraduate students used 3-D modeling tools to construct virtual reality models of the solar system, and in the process, build rich understandings of various astronomical phenomena. For this study, primarily naturalistic inquiry was used to gain a holistic view of this semester-long course. These data are presented as two case studies focusing on: (1) the role of the teacher in this participatory learning environment; (2) the particular dynamics that formed in each group; (3) the modeling process; (4) the resources used, specifically student-developed inscriptions; and (5) the role of technology and whether learning the technology interfered with learning astronomy. Results indicated that VR can be used effectively in regular undergraduate university courses as a tool through which students can develop rich understandings of various astronomical phenomena.

Notes: Abstract It is indicated that up to the year 2030, the annual average temperatures in China will increase by 0.88 to 1.2°C, with increments in the south less than in the north. Annual average precipitation would raise slightly, but the increment could be 4% in northeastern China. The increment of annual mean runoff could rise over 6% in the northeastern area, and decrease in the other regions 1.4 to 10.5%. The increased water shortage due to climate change could achieve 160 to 5090 million m3 in some areas of China. Financial loss due to the lack of water could reach 1300 million yuan, and up to 4400 million yuan in serious drought years in the Beijing-Tianjin-Tangshan area.

Notes: Abstract The International Life SciencesInstitute (ILSI) Risk Science Institute (RSI) convenedan expert panel of scientists to developrecommendations for a comprehensive monitoring programfor the Croton and Catskill/Delaware watersheds, whichprovide drinking water to New York City's residents. This effort was conducted as part of efforts topreserve and enhance the quality of New York City'sreservoir system through a watershed protectionprogram. The panel developed recommendations for astrategic framework on which to construct a monitoringprogram. As part of this activity, the paneldetermined whether existing monitoring activities weredeficient and, where activities were deficient, thepanel developed recommendations for additionalinformation that should be collected.The panel recommended the development and use of anintegrated approach to watershed monitoring, whichdraws on modeling, risk-based planning and analysis,statistical sampling and design, and basic compliancemonitoring. The approach should be designed toprovide an assessment of natural and anthropogenicsources of stress to the system as well as anassessment of water quality trends in response tostresses acting in concert, both over the long termand over the five-year New York City Memorandum ofAgreement (MOA) assessment time frame. It should alsoprovide an assessment of the human health andenvironmental risks posed by a variety of stressors,and the impact of management actions implemented toameliorate stressors.

Notes: Abstract The migration of vinyl chloride monomer (VCM) from unplasticizedpolyvinyl chloride (uPVC) pipes was investigated using locallymanufactured pipes. Specimens of 33 cm long were used throughoutthe research. The investigation was carried out under differentconditions of water temperature, pH and total dissolved solidsconcentration and at different durations of exposure. The VCMconcentration in the water was evaluated using the gaschromotography (GC)/head-space technique. A VCM concentration ofmore than 2.5 ppb was detected after 30 days of exposure at45 °C. The initial VCM concentration in the uPVC pipewas predicted using equations derived from Fick's first law ofdiffusion. Water tenperature did not affect the migration ofVCM, unless it was raised to high values (i.e. 45 °C).Total dissolved solids (TDS) and pH of water were found toaffect the release of VCM from uPVC pipes. Diffusion rate of VCMwas predicted as a function of pH or TDS values.

Notes: Abstract To assess the impact of acid deposition on forestedloess and clay soils in the Netherlands, changes inbase saturation and soil solution concentrations weresimulated with the dynamic soil acidification modelReSAM for 38 loess soils and 16 clay soils. Theselected locations represent the range in geographicalposition and diversity in parent material occurring inforested loess and clay soils in the Netherlands. Twodeposition scenarios were used for the period1992–2050: a business as usual scenario (BAU) and ascenario in which deposition was reduced according topresent Dutch policy plans (MV-3). A comparison ofsimulated and measured soil solution concentrationsand base saturation in 1992/1993 showed that the modelsimulated concentrations and base saturation in theloess soils quite good. However, the model tended tooverestimate acidification in the top (0–10 cm) of theclay soils. Despite the reasonable agreement betweenmeasured and simulated data some uncertainty in thevalidity of the model predictions remains because timetrends to validate the model were not available. Themodel predicted a small but ongoing acidificationduring the BAU scenario in the loess soils asindicated by a decline in median base saturation andpH in the topsoil in 2050. Present policy plans (MV-3)lead to a slight recovery of the base saturation in2050 and a decline in Al concentrations. In the claysoils a strong decline in base saturation is simulatedin the topsoil, whereas an increase in base saturationis predicted for the subsoil.

Notes: Abstract Long-term charcoal production in small private charcoal kilns (CK) in Eastern Bieszczady Mts. (SE Poland) can cause local smoke contamination of the ambient forest environment. Responses of model soil systems, contaminated or not contaminated by CK smoke, to contrasting combinations of hydrothermic regimes were compared in laboratory microcosms (respiration of soil community, decomposition rate of soil organic matter and cotton stripes, herb seeds germination were studied). The majority of the obtained data show a markedly higher level of soil biological activity in the CK versus the control series. In some cases CK and control soil systems show different patterns of reactions to the tested combinations of microclimate regime. These phenomena should at least partly be attributed to the effects of CK pollution.

Notes: Abstract Adaptation in response to anthropogenic climate change seeks to maintain viability by maximising benefits and minimising losses. It is necessary because some climatic change is now inevitable, despite the international focus on mitigation measures. Indeed, the measures agreed at Kyoto would by themselves result in only a small reduction in the climate changes to be expected over the next century. Discussion of the expected changes and possible impacts leads to the following conclusions regarding climate change scenarios in relation to impacts and adaptation: • Climate change in the foreseeable future will not be some new stable "equilibrium" climate, but rather an ongoing "transient" process; • Climate change predictions relevant to impacts on most sectors and ecosystems are still highly uncertain; • There is a need for a greater focus on developing countries and tropical regions, and on relevant key variables, including the magnitude and frequency of extreme events; • The focus should shift from single predictions, or extreme ranges of uncertainty, to risk assessment; • Thresholds critical to impacted sectors and ecosystems should be identified, and expressed as functions of climatic variables; • Planned adaptations will be necessary to cope with multiple stresses, including those due to non-climatic changes; • A major task of adaptation science is to identify the limits of adaptation, i.e., to identify "dangerous levels of greenhouse gases" beyond which adaptation becomes impractical or prohibitively expensive.

Notes: Abstract If current trends continue, human activities will drastically alter most of the planet's remaining natural ecosystems and their composite biota within a few decades. Compounding the impacts on biodiversity from deleterious management practices is climate variability and change. The Intergovernmental Panel on Climate Change (IPCC) recently concluded that there is ample evidence to suggest climate change is likely to result in significant impacts on biological diversity. These impacts are likely to be exacerbated by the secondary effects of climate change such as changes in the occurrence of wildfire, insect outbreaks and similar disturbances. Current changes in climate are very different from those of the past due to their rate and magnitude, the direct effects of increased atmospheric CO2 concentrations and because highly modified landscapes and an array of threatening processes limit the ability of terrestrial ecosystems and species to respond to changed conditions. One of the primary human adaptation option for conserving biodiversity is considered to be changes in management. The complex and overarching nature of climate change issues emphasises the need for greatly enhanced cooperation between scientists, policy makers, industry and the community to better understand key interactions and identify options for adaptation. A key challenge is to identify opportunities that facilitate sustainable development by making use of existing technologies and developing policies that enhance the resilience of climate-sensitive sectors. Measures to enhance the resilience of biodiversity must be considered in all of these activities if many ecosystem services essential to humanity are to be sustained. New institutional arrangements appear necessary at the regional and national level to ensure that policy initiatives and research directed at assessing and mitigating the vulnerability of biodiversity to climate change are complementary and undertaken strategically and cost-effectively. Policy implementation at the national level to meet responsibilities arising from the UNFCCC (e.g., the Kyoto Protocol) and the UN Convention on Biological Diversity require greater coordination and integration between economic sectors, since many primary drivers of biodiversity loss and vulnerability are influenced at this level. A case study from the Australian continent is used to illustrate several key issues and discuss a basis for reform, including recommendations for facilitating adaptation to climate variability and change.

Notes: Abstract Global climate change is likely to have a range of consequences for human health as a result of disturbance or weakening of the biosphere's natural or human-managed life support systems. The full range of potential human health impacts of global climate change is diverse and would be distributed differentially spatially and over time. Changes in the mortality toll of heatwaves and changes in the distribution of vector-borne infectious diseases may occur early. The public health consequences of sea level rise and of regional changes in agricultural productivity may not occur (or become apparent) for several decades. Vulnerability is a measure of both sensitivity to climate change and the ability to adapt in anticipation of, or in response to, its impacts. The basic modes of adaptation to climate-induced health hazards are biological, behavioural and social. Adaptation can be undertaken at the individual, community and whole-population levels. Adaptive strategies should not introduce new health hazards. Enhancement of the acknowledged public health infrastructure and intervention programmes is essential to reduce vulnerability to the health impacts of climate change. In the longer-term, fundamental improvements in the social and material conditions of life and in the reduction of inequalities within and between populations are required for sustained reduction in vulnerability to environmental health hazards.

Notes: Abstract A mechanism has been established to improve integration of international climate-related programmes. Known as the Climate Agenda it outlines a programme, that in a cost-effective way, responds to national obligations to respond to international agreements as well as their national needs for social and economic development. The paper briefly describes the Climate Agenda and the incorporation within it of studies of climate impact assessments and response strategies to reduce vulnerability. The need for increased emphasis on climate impact assessment and for the development of effective adaptation measures is emphasised following the elaboration of a Kyoto Protocol to the United Nations Framework Convention on Climate Change (UNFCCC). UNEP's efforts to identify national programmes contributing to the Climate Agenda are described. The response from developing countries has, however, been very disappointing, even from countries where we know work is ongoing through funding by GEF or US Country Studies Program and other bilateral programmes. Initial compilation of information available so far shows that many developed countries are putting a lot into the area of impact assessment of not just climate change, but also climate variability. There remain some research gaps, especially in the area of assessment of climate impacts on ecosystems, hydrological systems, etc. Considerable efforts are presently being directed at reduction of emissions of greenhouse gases and in the case of developing countries, most efforts are being directed towards completing national communications and providing baseline data for future studies. The paper refers to early activities by UNEP in cooperation with other international organizations to undertake integrated assessments of the impacts of climate change on important socio-economic sectors and the later incorporation of lessons learned into the IPCC Guidelines for Assessing Impacts of Climate Change. Later sections outline the development of a handbook on methods for climate change impact assessment and adaptation strategies as a practical approach to national assessments and the development of appropriate and cost-effective response to climate change. The initiation of a GEF-funded project to apply the methods contained in the handbook and improve the results based on national studies is also described for both developed and developing countries. Working in collaboration with a team of international experts under the coordination of the Institute of Environmental Studies at Vrije University (Amsterdam), the goal of this ongoing project is to develop a valuable methodological tool that Parties to the UNFCCC may apply to develop national climate change impact and adaptation assessments. Development of these guidelines was linked to a series of country studies in Antigua and Barbuda, Estonia, Cameroon and Pakistan funded under a UNEP/GEF project. The application of the first version of the UNEP Handbook by national study teams in these four countries is making valuable technical and practical contributions and will ensure that the next version of the Handbook will be a more useful tool for experts in developing countries undertaking similar studies in the future. The methods contained in the Handbook are also the basis for similar assessments funded under bilateral development programmes in other countries. These and similar studies elsewhere are coordinated with the UNEP programme and will eventually aim to create reliable and comparable assessments, a compatible set of tools for such purpose and the identification of realistic adaptation options for incorporation into national planning for adapting to climate change. The paper also addresses how climate impact assessment and response strategies are undertaken as part of national enabling activities carried out in co-operation with UNEP.

Notes: Abstract Many developing countries, especially in Africa, contribute only very small amounts to the world total of greenhouse gas emissions. For them, the reduction of such emissions is not a priority, and the more important issue is to find ways to reduce their vulnerability to the projected climate change which is being imposed upon them largely as a result of emissions from developed countries. This priority does not accord with the ultimate objective of the United Nations Framework Convention on Climate Change, which is to achieve stabilization of greenhouse gas emissions. This paper reports upon studies in Uganda designed to help in the development of a national adaptation strategy, and addresses the need to reconcile such a strategy with the global priority accorded to mitigation and with national economic development priorities. Some features of a national climate change adaptation strategy are identified and questions are raised about the need for an international regime to facilitate and support adaptation.

Notes: Abstract Climate change impacts on African human settlements arise from a number of climate change-related causes, notably sea level changes, impacts on water resources, extreme weather events, food security, increased health risks from vector home diseases, and temperature-related morbidity in urban environments. Some coastlines and river deltas of Africa have densely populated low-lying areas, which would be affected by a rise in sea level. Other coastal settlements will be subjected to increased coastal erosion. Recent flooding in East Africa highlighted the vulnerability of flood plain settlements and the need to develop adaptive strategies for extreme weather events management and mitigation. In the semi arid and arid zones many settlements are associated with inland drainage water sources. Increases in drought will enhance water supply related vulnerabilities. Inter-basin and international water transfers raise the need for adequate legal frameworks that ensure equity among participating nations. Similarly, water supply and irrigation reservoirs in seasonal river catchments might fail, leading to poor sanitation in urban areas as well as food shortage. Hydroelectric power generation could be restricted in drought periods, and where it is a major contributor to the energy budget, reduced power generation could lead to a multiplicity of other impacts. States are advised to develop other sources of renewable energy. Temperature changes will lead to altered distribution of disease vectors such as mosquitoes, making settlements currently free of vector borne diseases vulnerable. Rapid breeding of the housefly could create a menace associated with enteric disorders, especially in conditions of poor sanitation. The dry savannahs of Africa are projected as possible future food deficit areas. Recurrent crop failures would lead to transmigration into urban areas. Pastoralists are likely to undertake more trans-boundary migrations and probably come into conflict with settled communities. Adaptive measures will involve methods of coastal defences (where applicable), a critical review of the energy sector, both regionally and nationally, a rigorous adherence to city hygiene procedures, an informed agricultural industry that is capable of adapting to changing climate in terms of cropping strategies, and innovations in environment design to maximise human comfort at minimum energy expenditure. In the savannah and arid areas water resource management systems will be needed to optimise water resource use and interstate co-operation where such resources are shared. Climate change issues discussed here raise the need for state support for more research and education in impacts of climate change on human settlements in Africa.

Notes: Abstract The sodium arsenite method developed by Jacobs andHochheiser is one of the most widely used manualmethods for nitrogen dioxide (NO2) monitoring inambient air, particularly in developing countries. Asreported, the method gives 82% NO2 absorptionefficiency (NAE) in the concentration range from 40 to750 μg/m3, when only one impinger tube isemployed in the sampling train at a flow rate of 0.2lpm and for 24 h sampling duration. Accordingly,a uniform correction factor (0.82) is used indenominator to calculate the ultimate concentration ofNO2 in ambient air.In the present investigation, the effect oftemperature on absorption efficiency of NO2 isstudied employing four impinger tubes in series tocollect the maximum NO2 generated in the gasstream. The study conducted at 16, 26 and 36 °Ctemperatures shows maximum absorption efficiency(average) of 87.8% at 26°C in 1st impingertube. At lower and higher temperatures, it is foundconsiderably less. A suitable correction factor,therefore, must be applied to estimate actual NO2concentration in ambient air using arsenite method, intropical countries like India, where atmospherictemperature variations are large (less than 5°Cin winter and more than 45°C in summer).

Notes: Abstract The subsurface temperature field was studied on a set of 46 borehole logs measured in the vicinity of uranium deposits in the Bohemian Cretaceous Basin. Vertical variations of the steady state temperature and the temperature gradient are governed by thermal conductivity which strongly varies in dependence on lithology. Large departures from undisturbed temperature detected in many holes are associated with uranium mining. A positive anomaly is observed in leaching fields where large amounts of acid are injected into the uranium-bearing Cenomanian. A negative anomaly is linked to the operation of hydraulic barriers which enclose the mining area and helps to contain pollution by pumping clean water into the Cenomanian aquifer. The spatial distribution of the observed temperature anomalies helps to map the migration of the fluids used in both processes. The temperature disturbance is propagated from the Cenomanian aquifer up through overlying impermeable sediments. The good fit of transient conductive models to the measured temperatures rules out heat advection and hence upward water flow towards and contamination of the upper Middle Turonian aquifer in the vicinity of the holes studied.

Notes: Abstract Topology optimization design of continuum structures that can take account of stress and displacement constraints simultaneously is difficult to solve at present. The main obstacle lies in that, the explicit function expressions between topological variables and stress or displacement constraints can not be obtained using homogenization method or variable density method. Furthermore, large quantities of design variables in the problem make it hard to deal with by the formal mathematical programming approach. In this paper, a smooth model of topology optimization for continuum structures is established which has weight objective considering stress and displacement constraints based on the independent-continuous topological variable concept and mapping transformation method proposed by Sui Yunkang and Yang Deqing. Moreover, the approximate, explicit expressions are given between topological variables and stress or displacement constraints. The problem is well solved by using dual programming approach, and the proposed element deletion criterion implements the inversion of topology variables from the discrete to the continuous. Numerical examples verify the validity of proposed method.

Notes: Abstract The adsorption of copper, chromate, and arsenate (CCA)onto iron-oxide-coated sand (IOCS) was examined insingle-metal and mixed-metal systems. Copper andarsenate were strongly adsorbed or formed inner-spheresurface complexes with the IOCS surface while chromatewas weakly adsorbed or formed an outer-sphere surfacecomplex with the IOCS surface. Copper adsorption byIOCS slightly increased in the presence of arsenatebut was not affected by the presence of chromate. Arsenate adsorption was not affected by the presenceof copper and/or chromate. Chromate adsorptionincreased in the presence of copper by the combinationof electrostatic effects and possiblesurface-copper-chromate ternary complex formation. The presence of arsenate significantly decreasedchromate adsorption due to competition for adsorptionsites and electrostatic effects. Using inner-spheresurface complexation constants for copper and arsenateand outer-sphere surface complexation constants forchromate, the triple-layer model (TLM) was successfulin describing adsorption of copper, chromate, andarsenate in single-solute systems. The modelindicated that each metal uses a different number ofadsorption sites. For CCA metals-IOCS systems, theequilibrium constants determined from single-solutesystems were not able to predict adsorption frommulti-solute systems. The TLM does not currentlyaccount for the heterogeneity of oxide surface sitesand the formation of ternary complexes and/or solidphases that do not exist in single-solute systems.

Notes: Abstract The influence of thermal discharges on thephytoplankton community from a coastal zone of theGulf of Mexico was evaluated through their structureand photosynthetic behaviour focusing on responses tochanges in light and temperature. Biological andphysicochemical parameters were measured over a periodof two years in an area with permanent hot waterdischarges from a thermoelectric plant. Thetemperature in the sampling area ranged from 23.5 to36 °C with differences between the coldest andthe hottest station from 5.3 to 9.2 °C.Photosynthetically active radiation (PAR) were reducedin the discharge area water column, due to turbulence.One hundred and one different taxa were identifiedwith a strong predominance of Diatoms. The chlorophylla concentration ranged from 0.3 to 6.1 μgL-1, with highest values of thephaeophytin:chlorophyll ratio found at the hottest station.The community structure did not show significativedifferences among sampling stations with respect totemperature variations. However, in the algalassemblages influenced by thermal discharges, it waspossible to observe alterations in the photosynthesisbehaviour. Phytoplankton response to short termphotosynthesis experiments was segregated according tocomposition and origin of microalgal assemblages.Samples with larger heterogeneous composition had moreconsistent oxygen production responses. Algalcommunities exposed to hot effluent showed differentdegrees of photosynthesis rate reduction,higher light requirements (〉500 μE m2 s-1)and lower temperature (25 °C) to achieve Pmaxthan algae sampled in sites without such exposure.

Notes: Abstract Bleaching in stony-corals is the result of disruption of symbiosis between the coral hosts and photosynthetic microalgal endosymbionts (zooxanthellae). Coral bleaching events of unprecedented frequency and global extent have been reported during the last two decades. Recently, we demonstrated that bleaching of the coral Oculina patagonica in the Mediterranean Sea is caused by the bacterium Vibrio shiloi, when seawater temperature rises and allows the bacterium to become virulent. The first step in the infection process is host-specific adhesion of V. shiloi to O. patagonica via a β-galactoside receptor on the coral surface. The bacterium then penetrates into the coral tissue and produces extracellular materials which rapidly inhibit photosynthesis of zooxanthellae and bleach and lyse the algae. The inhibition of pothosynthesis is due to a low molecular weight, heat stable toxin and ammonia. Bleaching and lysis are due to a heat-labile, high molecular weight materials, probably lytic enzymes. Elevated temperature induces different virulence factors within the infectious agent of the disease, V. shiloi. Adhesion was found to be temperature-regulated. When the bacteria were grown at 16°C there was no adhesion to corals maintained at either 25°C or 16°. However, when the bacteria were grown at 25°C they adhered avidly to corals maintained at 16°C and 25°C. In addition, the production of lytic enzymes and the photosynthesis inhibitor was also found to be temperature dependent. Production of the latter toxin was ten times greater at 29°C than at 16°C, and extracellular protease was 5-fold higher in cultures grown at 29°C than at 16°C. The data presented here suggest an explanation for the correlation between elevated seawater temperatures and seasonal coral bleaching.

Notes: Abstract Aspergillus flavus, A. niger, Penicillium expansum and Rhizopus stolonifer were the most frequently isolated fungi from healthy apple fruits. Alternaria alternata was the most common organism of rotten apple fruits, followed by A. niger, A. flavus, P. expansum and R. stolonifer. The prevalent type of decay, brown rot lesion, is caused by R. stolonifer followed by A. flavus, A. niger, A. alternata and P. expansum. Sodium hypochlorite had good curative properties against fruit rots. The main natural mycotoxins produced in rotten apple were patulin and aflatoxins. The optimum temperature for patulin production by P. expansum was 15 °C after 15 days. Complete inhibition of patulin formation was attained using 0.2% lemon oil and 〉 90% inhibition using 0.05% lemon and 0.2% orange oils. Also significant inhibition (〉 90%) of aflatoxin production was observed with 0.2% lemon oil.

Notes: Abstract A lack of consensus on the general adaptive significance of energetic efficiency can be shown to exist in ecology and anthropology. After briefly reviewing key studies in optimal foraging theory and ecological anthropology, a model is presented which includes the following elements: (1) an equation of adaptive success with reproductive fitness, within an optimality framework; (2) a definition of energy limitation consistent with this framework; (3) a distinction between efficiency of energy capture and efficiency of energy use in achieving other goals; (4) a multiple definition of energetic efficiency that distinguishes purely energetic measures (output/input) from rate measures (energy captured per unit time); (5) the inclusion of time budgeting as a primary adaptive constraint; (6) a quantitative demonstration that increased output/input ratios do not consistently predict an increase in net energy captured, and are poor measures where time is a constraint. The general conclusion is that where energy is limiting, increased efficiency in the rate of energy capture will be adaptive because more net energy will be made available; where energy is not limiting, an increased net capture rate may still confer increased adaptive success, since time and labor energy are freed from energy-capture activities and can be devoted to achieving other adaptive goals. But while energetic efficiency, properly defined, is shown to have general adaptive significance in all cases where time or energy are constraints, considerations of adaptive optimality preclude the general equation of energetic efficiency and adaptive success.

Notes: Methods for estimating mutual diffusion coefficients for polymer-solvent systems are reviewed. Procedures are recommended for the determination of the temperature, concentration, and molecular weight dependences of diffusivities both for dilute and concentrated solutions.

Notes: Microscopic observations and Coulter counter measurements of the secondary nuclei produced when a parent crystal of potash alum was contacted with a solid rod suggest that these nuclei are born by an attrition mechanism which appears to be dependent on the growth rate of the crystal. The nuclei can be up to 50 μm in size. The nuclei smaller than about 4 μm are relatively insensitive to supersaturation, whereas the number greater than about 4 μm is approximately linear in supersaturation.

Notes: The operation of two arrangements of multistage adsorption beds, parallel and series, was analyzed, and the optimal design problem of minimizing the capital and operating costs of the multistage adsorption bed systems was formulated. Solution of the optimization problem was obtained by using the Fibonacci search scheme. For the purpose of the study, data on the adsorption of liquid on activated carbon were taken from the literature for both single solute and multisolute adsorption systems and was used to derive the expressions for adsorption rate and the equilibrium relationship. Details of the performance of the optimally designed multistage adsorption bed systems are presented in terms of the physical and design parameters.

Notes: A method is presented for predicting absorption rates for liquid layers flowing along a wall. It is based on results presently available in the literature as well as on the results of studies we recently carried out on the rate of oxygen absorption from a flowing air stream into water layers on the bottom of a horizontal enclosed channel and on the inside of a vertical pipe. Absorption measurements can be interpreted by assuming that the process is controlled by eddies whose length and velocity are characterized by bulk turbulence properties and that in a region of thickness δ close to the interface the turbulence is dampened by viscosity.

Notes: The feasibility of new solid/liquid separation processes, such as solids removal from oil and certain tertiary oil recovery techniques, can be evaluated by a thermodynamic stability analysis of possible liquid-liquid-particle configurations. The thermodynamic stability and hence feasibility of two possible liquid-liquid-particle separation process is predicted by use of a free energy analysis. Stability is shown to depend primarily on droplet/particle size ratio (n) and three phase contact angle (θ). Stability criteria are presented which can be applied to many particle and liquid separation processes.

Notes: Two-phase, annular flow of gases and non-Newtonian liquids through horizontal pipes is modeled, and a prediction method for pressure drop and gas volume fraction is proposed. The prediction method consists of a modification, based upon shear rate dependence of the apparent viscosity of the liquid phase, of Lockhart-Martinelli correlations for Newtonian liquids. The model applies to the case of laminar flow of the annular liquid film. Experimental data, obtained with several aqueous polymer solutions and air, agree closely with predicted values of pressure drop and void fraction.

Notes: The kinetics of step polymerization involving a monomer with unequal reactivities has been obtained. The polydisperity index (PDI) has also been calculated both as a function of conversion and the initial stoichiometric ratio. It has been shown that the usually assumed maximum value of 2 for PDI can lead to erroneous molecular weight.

Notes: Continuous pH parametric pumping separations of a haemoglobin-albumin-CM Sepharose system were experimentally investigated. The parapump has a feed containing the protein mixture to be separated, introduced alternately to the top and bottom of the chromatographic column. The top and bottom products are withdrawn from the apparatus, respectively, during the bottom and top feed. It is shown that under certain conditions the pH driven parametric pump has the capacity for removal of protein components from one product fraction and large enrichment in the other fraction. Moreover, the continuous process can be operated with a large feed throughput.

Notes: A study is made of the structure and properties of material balance simulation problems, and a technique is developed for their efficient solution. The method requires neither simultaneous solution of all balance equations nor iterative convergence methods. Instead, for each stream mixing point in the flow sheet, a vector balance equation is developed which contains as unknowns only mixer output streams. This unique set of vector equations is sequenced for solution by using precedence ordering and substitution techniques. It is shown that only as many vector equations need to be solved simultaneously as there are streams which would require iteration in the conventional sequential approach. Once the mixer output streams are calculated, the remaining intermediate process streams are evaluated directly with no further equation solving. Computational results are presented showing the efficiency of the method.

Notes: Motionless mixers are well suited to augment heat transfer and to provide a uniform thermal environment in laminar flow reactors. Heat transfer performance can be characterized with the Nusselt number, while the degree of thermal homogeneity can be characterized using the thermal time distribution which is the nonisothermal analogue of the residence time distribution. Theoretical results, calculations, and design strategies are presented for a variety of mixer types including flow inverters as well as the more common flow dividers. Two-channel, partial flow inversion is an excellent, near optimal, strategy for cooling or other situations such as polymerizations which give elongated velocity profiles. For flattened velocity profiles, perfect mixing can sometimes give better results. In practice, however, partial inverters can be expected to outperform those motionless mixers which are primarily flow dividers.

Notes: The equation of motion for the two phase flow within a bubble column, operated within the recirculation flow regime, has been solved, and the profile of liquid flow has been determined. Nicklin's relation for the bubble flow regime has been extended to the recirculation flow regime.Data analysis shows that the mean slip velocity between bubble and liquid is approximately constant and that the kinematic turbulent viscosity increases rapidly with increasing diameter of the column. These observations lead to the conclusion that scale-up has but little influence upon the mean gas holdup.

Notes: Mathematical methods employed recently in a theoretical study by Uppal et al. (1974) are applied to the second-order homogeneous reaction between sodium thiosulfate and hydrogen peroxide and are combined with experimental investigations of that reaction using a nonadiabatic continuous stirred tank reactor (CSTR). A complete portrayal of the expected behavior of that reaction system is presented in parameter space. Some new experimental studies of reactor instabilities are presented and linked to that portrayal. Close agreement is shown between theoretical predictions and experimental data.

Notes: Mathematical modeling of a periodically cycled plate column has been completed by using a liquid bypass model to describe nonideal liquid draining. A numerical solution over a wide range of parameters provides a closed envelope of feasible solutions. A region of this envelope encloses favorable operating values of the parameters, while the other region is unfavorable. Measurements of the parameters for nonideal liquid draining in a 600 mm diameter column fitted with sieve plates lead to predictions of only small improvements in separation performance. Modifications to the column intervals are required to move the parameters into a more favorable position in the solution envelope.

Notes: A general treatment of fugacities of liquid mixtures yields the proper thermodynamic functions for dealing with nonidealities of liquid phases in equilibrium with vapor mixtures for systems containing supercritical components. The activity coefficients of the supercritical components may be based on standard state fugacities for the hypothetical pure liquids or on Henry's constants. A comparison of the rigorous thermodynamic equations which apply to the liquid phase for the two alternatives shows that they are equivalent.

Notes: This paper considers the transfer of mass or heat between a fluid and a small amplitude solid wavy surface. A periodic variation of the transfer rate can occur because of wave induced variations of the normal convective flow and of the properties of the turbulence. Solutions of the mass balance equations are presented for the laminar flow at a large Schmidt number or Prandtl number and for turbulent flow at large and small wave numbers. For turbulent flows at intermediate wave numbers, the prediction is limited by inadequacies of present theories that model the wave induced variation in the turbulent diffusion of heat or mass. In order to provide guidance for this modeling, new measurements on the variation of the mass transfer rate along a solid wavy surface are presented for a Schmidt number of 729. An analogy between momentum and mass transfer is explored as a means for evaluating the turbulent diffusion terms.The amplitude of the function describing the mass transfer variation is found to decrease with decreasing wave number and the phase to increase with decreasing wave number. The phase angle and the amplitude of the variation in the mass transfer rate relative to the average mass transfer rate are insensitive to changes in Schmidt number or Prandtl number. For turbulent flows, the phase change can be large enough that the maximum in the mass transfer rate can exist somewhere in the trough of the wave. This result is of considerable significance in interpreting wavelike dissolution patterns.

Notes: A theoretical and experimental analysis of self-inducting turbo aerator performance was carried out based on the theory of water jet injector operation. It was shown that the aerator's injection coefficient is completely determined by only two dimensionless groups, CH and EuG, between which there is a single valued dependence on whose basis generalization of experimental data is possible. An analytical expression for the optimality criterion or aerator performance index, accounting for aerator gas capacity, power consumption, and submergence, has been obtained in terms of CH and EuG with only one adjustable parameter. From the above two dependencies, a methodology was developed for determining optimal operating conditions, by means of which all the data necessary for the optimal design can be obtained from the results of bench scale experiment.

Notes: A series of seven coals of different ranks and from various locations were heated in air under relatively mild conditions to measure the rates of oxidation and the production of carbonic gases in the effluent stream. The gas flow rate, coal particle size, and reactor temperature were changed as independent variables. Each sample was exposed for from 6 to 9 hr under atmospheric pressure at temperatures in the range of 200° to 250°C. The results show two kinds of rate behavior depending primarily on the relative porosity of the coal under study. The small pore coals followed the expectations of the earlier Kam-Hixson-Perlmutter (KHP) model, but the large pore coals gave rates sensitive to transport effects. Correlations were also obtained on the ratio of carbon dioxide and carbon monoxide produced and on the relationship between the carbon content of an exposed coal and its heating value.

Notes: The semi-empirical Pitzer equation for modeling equilibrium in aqueous electrolyte systems has been extended in a thermodynamically consistent manner to allow for molecular as well as ionic solutes. Under limiting conditions, the extended model reduces to the well-known Setschenow equation for the salting out effect of molecular solutes. To test the validity of the model, correlations of vapor-liquid equilibrium data were carried out for three systems: the hydrochloric acid aqueous solution at 298.15°K and concentrations up to 18 molal; the NH3-CO2 aqueous solution studied by Van Krevelen et al. (1949) at 293.15°K; and the K2CO3-CO2 aqueous solution of the Hot Carbonate Process with temperatures from 343.15°K to 413.15°K and concentrations up to 40 weight percent equivalent potassium carbonate. The success of the correlations suggests the validity of the model for aqueous electrolyte systems of industrial interest.

Notes: Carbon dioxide and hydrogen will react over iron at 800° to 1 000°K and 1 bar pressure yielding water, carbon monoxide, methane, and carbon. In addition, iron oxides and carbides form during reaction. Phase diagrams are used to analyze this complex reaction system. Data are presented which suggest that the formation of magnetite (Fe3O4) or wustite (FexO) inhibits carbon formation. The water yield thus observed is limited by the time dependent iron-iron oxide-gas equilibrium. Preliminary data also suggest that the formation of carbides has little effect on water yield.

Notes: Drag coefficient and relative motion correlations for dispersed two-phase flows of bubbles, drops, and particles were developed from simple similarity criteria and a mixture viscosity model. The results are compared with a number of experimental data, and satisfactory agreements are obtained at wide ranges of the particle concentration and Reynolds number. Characteristics differences between fluid particle systems and solid particle systems at higher Reynolds numbers or at higher concentration regimes were successfully predicted by the model. Results showed that the drag law in various dispersed two-phase flows could be put on a general and unified base by the present method.

Notes: The operation of a periodically forced chemostat (CSTR) in which two microbial populations compete for the same nutrient has been examined. Easily implemented criteria for the stability of the resulting cycles have been obtained, using the Floquet stability theory. After examining several possibilities it was found that stable periodic trajectories of coexistence can be achieved: (a) when the dilution rate of the chemostat is properly varied in a periodic manner between two values so chosen that the growth of one population is favored by the first and the growth of the other population is favored by the second, (b) when a certain percentage of biomass and growing medium is harvested periodically from the chemostat, and (c) when both the dilution rate and the concentration of the substrate in the feed are varied simultaneously and in a periodic manner.

Notes: This study concerns the determination of stagnation point and minimum pressure point film thicknesses when a vertical flat plate is withdrawn from a reservoir containing non-Newtonian liquids. Upon consideration of three types of liquids, namely, Ellis, power law, and Bingham liquids, it has been found that stagnation point or minimum pressure point film thickness is a function of two parameters, one characterizing the liquid and the other representing parallel flow film thickness. It has also been shown that in the case of power law liquids, both the stagnation point and minimum pressure point exist, while in the case of Bingham liquids, the existence of one or both the points for a given nondimensional parallel flow film thickness depends upon the value of the Bingham number. Furthermore, it has been found that there may be situations when both the points can coincide; for example, in the case of Newtonian liquids, the two points coincide if the parallel flow film thickness is \documentclass{article}\pagestyle{empty}\begin{document}$ \sqrt {2 - \sqrt 3 } $\end{document}.

Notes: An empirical correlation for calculating third virial coefficients of nonpolar gases is developed in agreement with the corresponding states theorem. This equation requires the use of a third parameter which can be estimated from molecular parameters. The method is reliable, even for systems where no experimental data are available. The extension to mixtures involves one interaction constant for all possible binary sets.

Notes: Three modes or types of sedimentation are recognized in flocculent suspensions: Clarification, in which floccules are separated and settle independently; zone settling, in which floccules are incorporated into some solids structure so that all are constrained to subside at more or less the same rate; and compression or compaction, in which the solids structure is strong enough to exhibit a compressive yield value. Current models for sedimentation in the three modes are reviewed, with particular emphasis on their use and reliability (or lack of it) for sedimentation basin design. Most models of thickening presented in the literature derive from a basic partial differential equation for force balance. Models differ in which terms of the equation are disregarded. Several of the theories of compaction are essentially equivalent solutions for the same model, but with different sets of independent variables.

Notes: Measurements were made of the drag coefficients of smooth solid particles moving singly through still air at Reynolds numbers in the range of 103 to 104. Spheres were observed during acceleration, deceleration and at terminal velocity. Discs were tested during acceleration and at steady velocity. Other particles in the shapes of discs, circular cylinders and rectangular parallelepipeds were tested at steady velocity in their preferred and, in some cases, non-preferred orientations. The effects of non-steady velocity and of particle form were determined. An unexpected influence of particle density was observed for some of the particles.

Notes: Secondary nucleation kinetics for potash alum in draft-tube baffled crystallizers have been determined from steady state crystal size distributions measured down to about 5 μm. Differences in nucleation rates were found for crystallizers of similar geometry but different capacity. Models relating the frequency of crystal/propeller collisions to crystallizer geometry and operating parameters were compared. In general, these successfully accounted for the observed differences in nucleation rates.

Notes: Gas-phase diffusivities for high boiling point organics in common gases are determined by evaporating a single submicron aerosol droplet of the organic species, while it is suspended in an electric field in the path of a polarized laser beam. The droplet size is measured as a function of time by using Mie theory to determine the size from the light scattering data of intensity versus angle. In addition to diffusivities, the Lennard-Jones molecular interaction potential parameter, ∊ii, and the collision diameter σii, are found, by applying the molecular theory of gases to interpret the evaporation rate data. Results are compared with available empirical and semi-theoretical correlations for diffusivities and Lennard-Jones parameters. The low vapor pressure organics used here are dioctyl phthalate (DOP), dibutyl sebacate (DBS) and dibutyl phthalate (DBP), and the carrier gases are helium, nitrogen and carbon dioxide.

Notes: A model is developed for a fluidized bed reactor with the dense phase region treated by conventional two-phase models. Conversion in the freeboard is obtained based on particle trajectories predicted from drag considerations. The model is applied to an industrial-scale catalytic cracking regenerator. It is shown that the freeboard region can have an important influence on the overall conversion in the unit.

Notes: Several methods are reviewed for determining compositions in multiphase, reacting mixtures at equilibrium. Wolfe's quadratic programming algorithm is applied and results compared with the Rand method (Dluzniewski and Adler 1972), NASA method (Gordon and McBride 1971) and the George et al. (1976) implementation of Powell's method. For poor guesses in compositions, local and constrained minima in Gibbs free energy may arise, giving incorrect phase distributions.

Notes: A simulation procedure for predicting the dynamic behavior of a deep bed filter over the entire practicable range of filter operation is developed. The method is based on synthesizing available quantitative results relating to filtration, and to porous media flows, within an overall framework which views the process to consist of two principal stages dominated by appropriate limiting deposition modes. Evaluation of the results through comparison with available data indicates, to the extent the nature of these types of data permits, that the method is surprisingly effective and even capable of predicting on satisfactorily quantitative basis some intricate details of observed filter behavior.

Notes: The transient response of dry ash and slagging moving-bed coal gasification reactors is analyzed for small step changes in feed conditions. The approach to the new steady state for perturbations about the optimum in the Lurgi gasifier has a time scale of about 10 hr. Transients in the slagging gasifier can result in a decrease in the coal bed height, which occurs on a time scale of several hours. There is a rapid initial response in both types of reactors in product gas temperature and heating value.