ALBERT

Description: Four broad categories capture countries' political and economic barriers to quit coal. Use these to tailor solutions.

Description: At the end of March 2022, the European Commission published its new EU Strategy for Sustainable and Circular Textiles. Its ambitious vision is to reduce textile waste, promote circular measures and minimise the negative environmental impacts of the textile industry. But what would a textile industry that keeps textiles in a closed loop look like, and what political conditions would be required in Germany? This Zukunftsimpuls paper by the Wuppertal Institute points to the role that Germany could play in the transformation towards a circular textile industry.

Description: Research on environmental behaviour is often overlooked in literature on regime destabilization in energy transitions. This study addresses that gap by focusing on socio-political and demographic factors shaping support for carbon regime destabilization policies in one of the most carbon-intensive regions of Europe. Carbon-intensive industries, especially coal mining and coal-based power generation, are often concentrated in a few carbon-intensive regions. Therefore, decarbonization actions will affect those regions particularly strongly. Correspondingly, carbon-intensive regions often exert significant political influence on the two climate mitigation policies at the national level. Focusing on Poland, we investigate socio-political and demographic factors that correlate with the approval or rejection of the two climate mitigation policies: increasing taxes on fossil fuels such as oil, gas, and coal and using public money to subsidize renewable energy such as wind and solar power in Poland and its carbon-intensive Silesia region. Using logistic regression with individual-level data derived from the 2016 European Social Survey (ESS) and the 2014 Chapel Hill Expert Survey (CHES), we find party-political ideology to be an important predictor at the national level but much less so at the regional level. Specifically, voting for right-wing party is not a divisive factor for individual support of the two climate mitigation policies either nationally or regionally. More interestingly, populism is a strong factor in support of increasing taxes on fossil fuel in the carbon-intensive Silesia region but is less important concerning in support of using public money to subsidize renewable energy in Poland overall. These results show the heterogeneity of right-wing party and populism within the support for the two climate mitigation policies. Socio-demographic factors, especially age, gender, education level, employment status, and employment sector, have even more complex and heterogeneous components in support of the two climate mitigation policies at the national and regional levels. Identifying the complex socio-political and demographic factors of climate mitigation policies across different national versus carbon-intensive regional contexts is an essential step for generating in situ decarbonization strategies.

Description: The challenges and also potentials of the energy transition are tremendous in Germany, as well as in Japan. Sometimes, structures of the old energy world need "creative destruction" to clear the way for innovations for a decarbonized, low-risk energy system. In these times of disruptive changes, a constructive and sometimes controversial dialog within leading industrial nation as Japan and Germany over the energy transition is even more important. The German-Japanese Energy Transition Council (GJETC) released a summarizing report for the first project phase 2016-2018. It includes jointly formulated recommendations for politics as well as a controversial dialogue part. The Council jointly states and recommends that: Ambitious long-term targets and strategies for a low-carbon energy system must be defined and ambitiously implemented; Germany and Japan as high technology countries need to take the leadership. Both countries will have to restructure their energy systems substantially until 2050 while maintaining their competitiveness and securing energy supply. Highest priority is given to the forced implementation of efficiency technologies and renewable energies, despite different views on nuclear energy. In both countries all relevant stakeholders - but above all the decision-makers on all levels of energy policy - need to increase their efforts for a successful implementation of the energy transition. Design of the electricity market needs more incentives for flexibility options and for the extensive expansion of variable power generation, alongside with strategies for cost reduction for electricity from photovoltaic and wind energy. The implementation gap of the energy efficiency needs to be closed by an innovative energy policy package to promote the principle of "Energy Efficiency First". Synergies and co-benefits of an enhanced energy and resource efficiency policy need to be realized. Co-existence of central infrastructure and the growing diversity of the activities for decentralization (citizens funding, energy cooperatives, establishment of public utility companies) should be supported. Scientific cooperation can be intensified by a joint working group for scenarios and by the establishment of an academic exchange program.

Description: The German-Japanese Energy Transition Council (GJETC) was established in 2016 by experts from research institutions, energy policy think tanks, and practitioners in Germany and Japan. The objectives and main activities of the Council and the supporting secretariats are to identify and analyze current and future issues regarding policy frameworks, markets, infrastructure, and technological developments in the energy transition, and to hold Council meetings to exchange ideas and propose better policies and strategies. In its second project phase (2018-2020), the GJETC had six members from academia on the Japanese side, and eight members on the German side, with one Co-Chair from each country. From October 2018 to March 2020, the GJETC worked on and debated six topics: 1) Digitalization and the energy transition. 2) Hydrogen society. 3) Review of German and Japanese long-term energy scenarios and their evaluation mechanism. 4) Buildings, energy efficiency, heating/cooling. 5) Integration costs of renewable energies. 6) Transport and sector coupling. The outputs and the recommendations of the second phase of the GJETC are summarized in this report.

Description: The sales of pedelecs are currently skyrocketing in Germany and in many other places. As a low-carbon means of mobility, pedelecs have the potential to make a substantial contribution to the mobility transition. This thesis employs practice theory as proposed by Shove et al. (2012) to investigate this quickly evolving phenomenon. The analysis is based on interviews with e-bike commuters which were investigated using template analysis and exploratory memos. To obtain a broad picture the practice, a maximum variance sampling strategy was carried out in two cities that vary substantially with regard to velomobility: Wuppertal and Münster. This thesis one hand presents the first encompassing account on the practice elements which commuting by pedelec is composed of. It hence contributes to the debate about the depiction of practices. Furthermore, the thesis finds that pedelec commuting should be conceptualized as a variant of velomobility and not as a variant of motoring or as an independent practice. Yet, the elements integrated in pedelec-commuting are found to clearly differ from those of cycling, so that pedelec-commuting meets the requirements of everyday life much better than commuting on non-electrified bikes. The findings of this thesis suggest several pathways to strengthening this novel practice. The capacity of e-biking to serve mundane trips can for example be supported through the normalization of the use of weather- and transport relevant materials and competences. Deeper linkages with interacting practices from other sectors, such as an integration of cycling materials (GPS-trackers) into policing practices, can also con-tribute to this goal. With regard to research, the present work offers starting points for quantifications, for example on the relative importance of single elements as well as on the characteristics of their relations among each other or with regard to typical constellations of elements.

Description: The transformation of society into sustainable structures is one of the most important tasks for the future. That cities have a decisive role to play in this transformation process has been known at least since Rio 1992. They have enormous pressure to act for change: They are at the same time problem and solution for sustainable development. Currently there is another significant development for cities - the need and external pressure to be "smart", often understood merely as applying the latest digital technologies to become more efficient. The Smart City and the Sustainable City can work hand in hand or hinder each other, depending on their interpretation. In this study we focus on five Smart Cities in Western Germany to get a closer look at how they shape their processes and whether the underlying motivation is to become a technologically Smart City, focus on sustainable development, or both. With the help of the innovation biography research method, we show how cities shape the dynamic process towards forming a Smart City, the role sustainable urban development plays in the process, who the actors involved are, and the important role improved knowledge management then plays for the diffusion of the Smart Sustainable City within the region. It becomes clear how important communication and narratives are both in the process within each City towards forming a Smart Sustainable City and for the first step of diffusion, the adaptation of other cities within the region. This study is intended to serve both as a basis for cross-regional consideration and dialogue for the transfer of successful processes.

Description: Food and nutrition systems are linked to all Sustainable Development Goals (SDGs), which makes their transition toward social-ecological behavior patterns crucial for an overarching sustainability transformation. The perspective of (urban) logistics is of special interest. It couples the production and consumption physically and virtually. In this context, we shed light on the design of the turnover point of food in urban areas from the supply chain toward consumers and contribute to an overarching systemic perspective toward establishing a sustainable multilevel food system. We describe current patterns in urban food systems and propose several principles for sustainable design of (urban) food systems based on concepts such as (regional) collaboration and food literacy. Using these principles, we provide four design scenarios that concretely imagine future urban food consumption and production patterns titled "slow stock supply service," "deliver into the daily walk," "central district food depot," "super food action place." With this work we provide a starting for reflecting whether certain combinations of principles actually lead to patterns of daily life that are feasible, acceptable, or desirable. Moreover, we provide an initial qualitative assessment to stimulate further research that explores scenario pathways and incorporates additional indicators regarding the impact on social-ecological. We open up various research questions with regard to the overarching question of how urban food logistics should be designed to be consistent with the SDGs.

Description: To limit global warming, the use of carbon capture and storage technologies (CCS) is considered to be of major importance. In addition to the technical-economic, ecological and political aspects, the question of social acceptance is a decisive factor for the implementation of such low-carbon technologies. This study is the first literature review addressing the acceptance of industrial CCS (iCCS). In contrast to electricity generation, the technical options for large-scale reduction of CO2 emissions in the energy-intensive industry sector are not sufficient to achieve the targeted GHG neutrality in the industrial sector without the use of CCS. Therefore, it will be crucial to determine which factors influence the acceptance of iCCS and how these findings can be used for policy and industry decision-making processes. The results show that there has been limited research on the acceptance of iCCS. In addition, the study highlights some important differences between the acceptance of iCCS and CCS. Due to the technical diversity of future iCCS applications, future acceptance research must be able to better address the complexity of the research subject.

Description: Transponder-based Aircraft Detection Lighting Systems (ADLS) are increasingly used in wind turbines to limit beacon operation times, reduce light emissions, and increase wind energy acceptance. The systems use digital technologies such as receivers of digital transponder signals, LTE/5G, and other information and communication technology. The use of ADLS will be mandatory in Germany both for new and existing wind turbines with a height of 〉100 m from 2023 (onshore) and 2024 (offshore), so a nationwide rollout is expected to start during 2022. To fully realize the benefits while avoiding risks and bottlenecks, a thorough and holistic understanding of the efforts required and the impacts caused along the life cycle of an ADLS is essential. Therefore, this study presents the first multi-aspect holistic evaluation of an ADLS. A framework for evaluating digital applications in the energy sector, previously developed by the authors, is refined and applied. The framework is based on multi-criteria analysis (MCA), life cycle assessment (LCA), and expert interviews. On an aggregated level, the MCA results show an overall positive impact from all stakeholders’ perspectives. Most positive impacts are found in the society and politics category, while most negative impacts are of technical nature. The LCA of the ADLS reveals a slightly negative impact, but this impact is negligible when compared to the total life cycle impact of the wind turbines of which the ADLS is a part. Besides the aggregated evaluation, detailed information on potential implementation risks, bottlenecks, and levers for life cycle improvement are presented. In particular, the worldwide scarcity of the required semiconductors, in combination with the general lack of technicians in Germany, lead to the authors’ recommendation for a limited prolongation of the planned rollout period. This period should be used by decision-makers to ensure the availability of technical components and installation capacities. A pooling of ADLS installations in larger regions could improve plannability for manufacturers and installers. Furthermore, an ADLS implementation in other countries could be supported by an early holistic evaluation using the presented framework.

Description: The study investigates if causal claims based on a theory-of-change approach for impact reporting are credible. The authors use their most recent impact report for a Social Bond to show how theory-based logic models can be used to map the sustainability claims of issuers to quantifiable indicators. A single project family (homeownership loans) is then used as a case study to test the underlying hypotheses of the sustainability claims. By applying Bayes Theorem, evidence for and against the claims is weighted to calculate the degree to which the belief in the claims is warranted. The authors found that only one out of three claims describe a probable cause–effect chain for social benefits from the loans. The other two claims either require more primary data to be corroborated or should be re-defined to link the intervention more closely and robustly with the overarching societal goals. However, all previous reported indicators are below the thresholds of the most conservative estimates for fractions of beneficiaries in the paper at hand. We conclude that the combination of a Theory-of-Change with a Bayesian Analysis is an effective way to test the plausibility of sustainability claims and to mitigate biases. Nevertheless, the method is - in the presented form - also too elaborate and time-consuming for impact reporting in the sustainable finance market.

Description: The food system plays a crucial role in mitigating climate change. Even if fossil fuel emissions are halted immediately, current trends in global food systems may prevent the achieving of the Paris Agreement's climate targets. The high degree of variability and uncertainty involved in calculating diet-related greenhouse gas emissions limits the ability to evaluate reduction potentials to remain below a global warming of 1.5 or 2 degrees. This study assessed Western European dietary patterns while accounting for uncertainty and variability. An extensive literature review provided value ranges for climate impacts of animal-based foods to conduct an uncertainty analysis via Monte Carlo simulation. The resulting carbon footprints were assessed against food system-specific greenhouse gas emission thresholds. The range and absolute value of a diet carbon footprint become larger the higher the amount of products with highly varying emission values in the diet. All dietary pattern carbon footprints overshoot the 1.5 degrees threshold. The vegan, vegetarian, and diet with low animal-based food intake were predominantly below the 2 degrees threshold. Omnivorous diets with more animal-based product content trespassed them. Reducing animal-based foods is a powerful strategy to decrease emissions. However, further mitigation strategies are required to achieve climate goals.

Description: The transport sector accounts for 20 per cent of the greenhouse gas emissions in Germany and it is therefore key to success for German climate policy. At present, however, there is no other sector with a wider gap in missing the trajectory to climate neutrality. The present study, conducted on behalf of Huawei within the project "Shaping the Digital Transformation - Digital Solution Systems for the Sustainability Transition", points out new pathways towards a sustainable and climate friendly transition of the transport sector. The report specifies concrete options to follow up on the ambitious goals of the new coalition agreement to foster clean and digital mobility solutions. The authors refined eight theses on how digitalisation can foster sustainable mobility solutions and how to shape a supporting policy framework, which is aligning the financial and regulatory guardrails for ramping up a sustainable mobility system while gradually phasing down the usage of private cars.

Description: Community-based approaches to natural resource management are being discussed and experienced as promising ways for pursuing ecological conservation and socio-economic development simultaneously. However, the multiplicity of levels, scales, objectives and actors that are involved in sustainability transformations tends to be challenging for such bottom-up approaches. Collaborative and polycentric governance schemes are proposed for dealing with those challenges. What has not been fully explored is how knowledge from local contexts of community-based initiatives can be diffused to influence practices on higher levels and/or in other local contexts. This study explores how theoretical advances in the diffusion of grassroots innovation can contribute to understanding and supporting the diffusion of knowledge and practices from community-based initiatives and proposes a transdisciplinary approach to diffusion. For that aim, we develop an analytical perspective on the diffusion of grassroots innovations that takes into consideration the multiplicity of actors, levels and scales, the different qualities/types of knowledge and practices, as well as their respective contributions. We focus on the multiplicity and situatedness of cognitive frames and conceptualize the diffusion of grassroots innovations as a transdisciplinary process. In this way three different diffusion pathways are derived in which the knowledge and practices of grassroots initiatives can be processed in order to promote their (re)interpretation and (re)application in situations and by actors that do not share the cognitive frame and the local context of the originating grassroots initiative. The application of the developed approach is illustrated through transdisciplinary research for the diffusion of sustainable family farming innovations in Colombia. This conceptualization accounts for the emergence of multiplicity as an outcome of diffusion by emphasizing difference as a core resource in building sustainable futures.

Description: Public catering has become increasingly important in recent years. With increasing annual customers, the sector's impact on the environment is also growing continuously. At the same time, public catering offers a lever to promote sustainable nutrition that has rarely been used so far. Small changes in kitchen practices and food offers can thus be multiplied into a significant positive impact on environmental challenges, such as climate change or loss of biodiversity due to the large number of servings. In contrast to private households, management decisions in public catering can influence the food-related environmental impact of thousands of customers. This article deals with the nationwide level of greenhouse gas (GHG) emissions and resource use in the German public catering segment "business" and its saving potentials by different scenarios of unsupported and supported recipe revision. In this paper, we define "unsupported" as the intuitive optimization of recipes by employees of public catering businesses. In contrast, "supported" approaches had to meet specific target goals, for example of the Deutsche Gesellschaft für Ernährung; engl. German Nutrition Society or the sustainable level. Specifically, we will test how (A) an unsupported recipe revision, (B) a recipe revision based on dietary recommendations and (C) a recipe revision using scientific guidance affect the environmental impact of a dish. As a methodological framework, an online survey of public catering companies was conducted as well as a scenario analysis at menu level and at nationwide level. The results are based on empirical data on the one hand, and on extrapolations on the other. The results show that the nationwide implementation of recipe revision according to scientific guidance-such as concrete target goals for the GHG emissions per serving-can save up to 44% of resource use in the German business catering sector (which corresponds to 3.4 million tons of resources per year) and as much as 40% of GHG emissions (0.6 million tons GHG emissions per year). Even in the scenario of unsupported recipe revision, GHG and resource savings of up to 20% can be realized. The results show that public catering can reduce its material and carbon footprint by 20% overnight. Moreover, the findings show indications for the sustainable transformation of public catering. Nevertheless, it must be noted that these are some first steps of the transformation, which will require further changes with even greater impacts and political activities.

Description: Sufficiency measures are potentially decisive for the decarbonisation of energy systems but rarely considered in energy policy and modelling. Just as efficiency and renewable energies, the diffusion of demand-side solutions to climate change also relies on policy-making. Our extensive literature review of European and national sufficiency policies fills a gap in existing databases. We present almost 300 policy instruments clustered into relevant categories and publish them as "Energy Sufficiency Policy Database". This paper provides a description of the data clustering, the set-up of the database and an analysis of the policy instruments. A key insight is that sufficiency policy includes much more than bans of products or information tools leaving the responsibility to individuals. It is a comprehensive instrument mix of all policy types, not only enabling sufficiency action, but also reducing currently existing barriers. A policy database can serve as a good starting point for policy recommendations and modelling, further research is needed on barriers and demand-reduction potentials of sufficiency policy instruments.

Description: Nigeria is Africa's top cement producer and could be on course to be one of the top producers globally. The goal of this study is to identify and critically examine the pathways available to Nigeria to meet its decarbonisation goals in the cement sector. Based on a literature review, the study assesses demand drivers and decarbonisation potentials for the sector. It then presents two different quantitative pathways for growth in production of cement by 2050, and three different pathways for decarbonisation of the sector. Using published data and a scenario analysis tool, the study calculates how the sector's emissions might evolve under each of these pathways. The results indicate that, in the most ambitious scenario, emissions from the sector can plateau by the late 2030s, resulting in an overall increase of 21% by 2050 (compared to 2015 levels). Achieving this scenario is necessary in order to put the sector on a path to net zero emissions beyond 2050. The scenario is driven by reductions in both energy-related and process emissions, as well as a small share of carbon capture and storage and demand management. A moderately ambitious scenario that relies mostly on savings on energy-related emissions results in an 84% increase in emissions by 2050. Finally, the Business-as-Usual scenario results in an almost tripling of emissions by 2050. The results indicate a strong potential for policies to drive improvements in energy efficiency and clinker-to-cement ratio. Critical areas of uncertainty within the assumptions include the production rates (including the evolution of the export market) and the fuel mix.

Description: The Glasgow climate conference marked a symbolic juncture, lying half-way between the adoption of the UNFCCC in 1992 and the year 2050 in which according to the IPCC special report on the 1.5°C limit net zero CO2 emissions need to be reached, globally, in order to maintain a good chance of achieving the 1.5°C limit. This article undertakes an assessment of what the UNFCCC and in particular the Paris Agreement and its implementation process have actually achieved so far up to and including the results of the Glasgow conference. The article discusses efforts at ambition raising both within and outside the formal diplomatic process, the finalization of the implementation rules of the Paris Agreement, as well as progress on gender responsiveness, climate finance, adaptation and loss and damage. In summary, the Paris Agreement and its implementation can be considered a success as it is having a discernible impact on the behavior of parties as well as on non-party actors. However, significant further efforts will be required to actually achieve the objectives of the Agreement.

Description: The circle is a ubiquitous metaphor in the current scientific and political debate on possible strategies for coping with the changes brought by the so-called "Anthropocene". Terms such as "recycling", "upcycling", "downcycling", "life cycle" or "circular economy" all refer to the same geometric shape, which in turn can be found in numerous diagrams illustrating the respective design approaches and political strategies. But how does the circle shape the way we think and act as designers? Is it an appropriate metaphor to guide us to feasible actions, or is its degree of simplification too far removed from reality? In this article we look at the circular economy as a designed model, and question the circle as a communication tool for the cultural project of sustainability. As the circle may carry the risk of an oversimplified, unattainable, even disillusioning ideal, we discuss various alternative images and forms for their potential to become metaphors of alternative models. The hole, the plate, the pasture, the wheel, the mill wheel, the hamster wheel, the vortex, the double helix, the spider web and the rhizome - as metaphors, they each open up different perspectives and approaches to reality, they each construct different relationships and dependencies between nature and culture. The aim of this article is less about postulating the end of the circle as a metaphor in the sustainability debate, as it is about to fathom the circle's ends as a metaphorical tool. In other words, when does the metaphor of the circle become too abstract? As designers we can say that falling in love with a form right at the beginning of a design process can be rather limiting, as hardly any alternatives will be considered, and all further decisions are subordinated to achieving the desired shape. Therefore, we would like to emphasise the contingency of the circular economy as a model. We would like to welcome the thought that the circle has an "end".

Description: Although smart energy technologies (SETs) can fulfill multiple tasks in increasingly decarbonized and digitalized energy systems, market diffusion is still limited. This study investigates which beliefs influence consumers' intention to adopt two smart-energy offerings, whether the rapid growth of the smart home market will now drive SET adoption, and if consumer-driven diffusion will lead to sustainability potentials being realized. Building on UTAUT2, a new theoretical model is proposed, and a consumer acceptance survey was conducted in Germany (n = 700). Results indicate that a growing smart home market will not increase SET adoption and that "adjustable green defaults" should be introduced.

Description: In Argentina, renewable energies are promoted as a way of decarbonising the electricity mix and providing reliable energy services. The national goal is to generate 20% of electricity from renewable sources by 2025. However, despite significant natural potential, solar photovoltaic still represents only a small share of Argentina's total electricity generation. Although this picture may look bleak, a wide range of market segments relating to decentralised photovoltaic generation in Argentina have developed. The general objective of this study is to examine the dynamics that currently enable or constrain the diffusion of distributed photovoltaic systems in Argentina. By applying the Technical Innovation System (TIS) approach, the aim is to understand which functions of the system are strong/weak and how these are influenced by endogenous/exogenous system strengths and weaknesses. To that end, a mixed method research strategy is applied. The exploratory sequential research design allows first to explore system strengths and weaknesses based on qualitative approaches, and then to further analyse the contextual embeddedness and the level of importance of the identified variables using quantitative survey instruments. Thereby, this study provides an important analytical method that contributes to a more nuanced understanding of the interdependencies of the TIS. The empirical results indicate that system weaknesses are shaped to a large extent by the overall contextual dynamics - such as political instability, energy subsidies and high inflation rates. System strengths relate to both the TIS itself (particularly knowledge development through pilot projects and market formation through provincial and national support programmes), to contextual relationships (linked to the availability of educational institutions that enable the rapid diffusion of knowledge) and to the importance of rural areas as protected spaces for the application of photovoltaic systems. Consequently, the study highlights the challenges to overcome for the broader diffusion of distributed photovoltaic generation.

Description: The project "Plastic Credits - Financing the Transition to the Global Circular Economy" supports the implementation of a waste management structure in India's rural regions. By that it aims to improve the current waste collection and treatment structures in the pilot regions Goa, Maharashtra, and Kerala. Herein, the project focuses on low value plastics (LVP), and especially multi-layer plastics (MLP), that have no market value. In order to analyze the environmental impacts of the project, an Environmental Impact Assessment (EIA) was conducted. The considered environmental components comprise: greenhouse gas emissions, usage of primary resources, impacts on marine and terrestrial wildlife, standard of living, and economic costs.

Description: In warm and hot climates, ceiling fans and/or air conditioners (ACs) are used to maintain thermal comfort. Ceiling fans provide air movement near the skin, which enhances the evaporation of sweat, reduces heat stress, and enhances thermal comfort. This is also called the cooling effect. However, AC usage behaviour and the effects of elevated air speed through the use of ceiling fans on indoor operative temperature during AC usage are not widely studied. This study investigated the optimum AC (cooling) set point temperature and air velocity necessary for maintaining thermal comfort while achieving energy conservation, in mixed-mode buildings in India, through field studies by using used custom-built Internet of Things (IOT) devices. In the current study, the results indicate a 79% probability that comfort conditions can be maintained by achieving a temperature drop of 3K. If this drop can be achieved, as much as possible, through passive measures, the duration of AC operation and its energy consumption are reduced, at least by 67.5 and 58.4%, respectively. During the air-conditioned period, there is a possibility that the cooing effect is reduced because of increase in operative temperature due to ceiling fan operation. Therefore, the optimum solution is to maintain the highest AC set point and minimum fan speed setting that are acceptable.

Description: The recently finalized research project "ZRR for municipal waste" aimed at testing and evaluating the automation of municipal waste sorting plants by supplementing or replacing manual sorting, with sorting by a robot with artificial intelligence (ZRR). The objectives were to increase the current recycling rates and the purity of the recovered materials; to collect additional materials from the current rejected flows; and to improve the working conditions of the workers, who could then concentrate on, among other things, the maintenance of the robots. Based on the empirical results of the project, this paper presents the main results of the training and operation of the robotic sorting system based on artificial intelligence, which, to our knowledge, is the first attempt at an application for the separation of bulky municipal solid waste (MSW) and an installation in a full-scale waste treatment plant. The key questions for the research project included (a) the design of test protocols to assess the quality of the sorting process and (b) the evaluation of the performance quality in the first six months of the training of the underlying artificial intelligence and its database.

Description: Cities are becoming digital and are aiming to be sustainable. How they are combining the two is not always apparent from the outside. What we need is a look from inside. In recent years, cities have increasingly called themselves Smart City. This can mean different things, but generally includes a look towards new digital technologies and claim that a Smart City has various advantages for its citizens, roughly in line with the demands of sustainable development. A city can be seen as smart in a narrow sense, technology wise, sustainable or smart and sustainable. Current city rankings, which often evaluate and classify cities in terms of the target dimensions 2smart" and "sustainable", certify that some cities are both. In its most established academic definitions, the Smart City also serves both to improve the quality of life of its citizens and to promote sustainable development. Some cities have obviously managed to combine the two. The question that arises is as follows: What are the underlying processes towards a sustainable Smart City and are cities really using smart tools to make themselves sustainable in the sense of the 2015 United Nations Sustainability Goal 11? This question is to be answered by a method that has not yet been applied in research on cities and smart cities: the innovation biography. Based on evolutionary economics, the innovation biography approaches the process towards a Smart City as an innovation process. It will highlight which actors are involved, how knowledge is shared among them, what form citizen participation processes take and whether the use of digital and smart services within a Smart City leads to a more sustainable city. Such a process-oriented method should show, among other things, to what extent and when sustainability-relevant motives play a role and which actors and citizens are involved in the process at all.

Description: The demand for metals from the entire periodic table is currently increasing due to the ongoing digitalization. However, their use within electrical and electronic equipment (EEE) poses problems as they cannot be recovered sufficiently in the end-of-life (EoL) phase. In this paper, we address the unleashed dissipation of metals caused by the design of EEE for which no globally established recycling technology exists. We describe the European Union's (EU) plan to strive for a circular economy (CE) as a political response to tackle this challenge. However, there is a lack of feedback from a design perspective. It is still unknown what the implications for products would be if politics were to take the path of a CE at the level of metals. To provide clarification in this respect, a case study for indium is presented and linked to its corresponding recycling-metallurgy of zinc and lead. As a result, a first material-specific rule on the design of so-called "anti-dissipative" products is derived, which actually supports designing EEE with recycling in mind and represents an already achieved CE on the material level. In addition, the design of electrotechnical standardization is being introduced. As a promising tool, it addresses the multi-dimensional problems of recovering metals from urban ores and assists in the challenge of enhancing recycling rates. Extending the focus to other recycling-metallurgy besides zinc and lead in further research would enable the scope for material-specific rules to be widened.

Description: Managing energy use by municipalities should be an important part of local energy and climate policy. The ISO 50001 standard constitutes an internationally recognized catalogue of requirements for systematic energy management. Currently, this standard is mostly implemented by companies. Our study presents an approach where consultants supported 28 European municipalities in establishing energy management systems. A majority (71%) of these municipalities had achieved ISO 50001 certification by the end of our study. We also conducted two surveys to learn more about motivations and challenges when it comes to establishing municipal energy management systems. We found that organizational challenges and resource constraints were the most important topics in this regard. Based on the experiences in our study we present lessons learned regarding supporting municipalities in establishing energy management systems.

Description: Supply risks and environmental concerns drive the interest in critical raw material recycling in the European Union. Globally, waste electrical and electronic equipment (WEEE) is projected to increase by almost 40% until 2030. This waste stream can be a source of secondary raw materials. The determination of the economic feasibility of recycling and recovering specific materials is a data-intensive, time-consuming, and case-specific task. This study introduced a two-part evaluation scheme consisting of upper continental crust concentrations and raw material prices as a simple tool to indicate the potential and limitations of critical raw material recycling. It was applied to the case of light-emitting diodes (LED) lamps in the EU. A material flow analysis was conducted, and the projected waste amounts were analyzed using the new scheme. Indium, gallium, and the rare earth elements appeared in low concentrations and low absolute masses and showed only a small revenue potential. Precious metals represented the largest revenue share. Future research should confirm the validity and usefulness of the evaluation scheme.

Description: Many cities all over the world highlight the need to transform their urban mobility systems into more sustainable ones, to confront pressing issues such as air and noise pollution, and to deliver on climate change mitigation action. While the support of innovations is high on the agenda of both national and local authorities, consciously phasing-out unsustainable technologies and practices is often neglected. However, this other side of the policy coin, "exnovation", is a crucial element for the mobility transition. We developed a framework to facilitate a more comprehensive assessment of urban mobility transition policies, systematically integrating exnovation policies. It links exnovation functions as identified in transition studies with insights from urban mobility studies and empirical findings from eight city case studies around the world. The findings suggest that most cities use some kinds of exnovation policies to address selective urban mobility issues, e.g., phasing-out diesel buses, restricting the use of polluting motor vehicles in some parts of the city, etc. Still, we found no evidence for a systematic exnovation approach alongside the innovation policies. Our framework specifies exnovation functions for the urban mobility transition by lining out policy levers and concrete measure examples. We hope that the framework inspires future in-depth research, but also political action to advance the urban mobility transition.

Description: Green hydrogen will play a key role in building a climate-neutral energy-intensive industry, as key technologies for defossilising the production of steel and basic chemicals depend on it. Thus, policy-making needs to support the creation of a market for green hydrogen and its use in industry. However, it is unclear how appropriate policies should be designed, and a number of challenges need to be addressed. Based on an analysis of the ongoing German debate on hydrogen policies, this paper analyses how policy-making for green hydrogen development may support industry defossilisation. For the assessment of policy instruments, a simplified multi-criteria analysis (MCA) is used with an innovative approach that derives criteria from specific challenges. Four challenges and seven relevant policy instruments are identified. The results of the MCA reveal the potential of each of the selected instruments to address the challenges. The paper furthermore outlines how instruments might be combined in a policy package that supports industry defossilisation, creates synergies and avoids trade-offs. The paper's impact may reach beyond the German case, as the challenges are not specific to the country. The results are relevant for policy-makers in other countries with energy-intensive industries aiming to set the course towards a hydrogen future.

Description: The Digital Product Passport (DPP) is a concept of a policy instrument particularly pushed by policy circles to contribute to a circular economy. The preliminary design of the DPP is supposed to have product-related information compiled mainly by manufactures and, thus, to provide the basis for more circular products. Given the lack of scientific debate on the DPP, this study seeks to work out design options of the DPP and how these options might benefit stakeholders in a product's value chain. In so doing, we introduce the concept of the DPP and, then, describe the existing regime of regulated and voluntary product information tools focusing on the role of stakeholders. These initial results are reflected in an actor-centered analysis on potential advantages gained through the DPP. Data is generated through desk research and a stakeholder workshop. In particular, by having explored the role the DPP for different actors, we find substantial demand for further research on a variety of issues, for instance, on how to reduce red tape and increase incentives for manufacturers to deliver certain information and on how or through what data collection tool (e.g., database) relevant data can be compiled and how such data is provided to which stakeholder group. We call upon other researchers to close the research gaps explored in this paper also to provide better policy direction on the DPP.

Description: Schools play an important role in achieving climate protection goals, because they lay the foundation of knowledge for a responsible next generation. Therefore, schools as institutions have a special role model function. Enabling schools to become aware of their own carbon footprint (CF) is an important prerequisite for being able to tap the substantial CO2 reduction potential. Aiming at the direct involvement of students in the assessment process, a new assessment tool was developed within the Schools4Future project that gives students the opportunity to determine their own school's CF. With this instrument the CO2 emissions caused by mobility, heating and electricity consumption as well as for food in the school canteen and for consumables (paper) can be recorded. It also takes into account existing renewable energy sources. Through the development of the tool, not only a monitoring instrument was established but also a concrete starting point from which students could take actions to reduce Greenhouse Gas (GHG) emissions. This paper presents the tool and its methods used to calculate the CF and compares it with existing approaches. A comparative case study of four pilot schools in Germany demonstrates the practicability of the tool and reveals fundamental differences between the GHG emissions.

Description: More than 150 municipal utilities (so-called Stadtwerke) were established in Germany from the beginning of the millennium, bringing the total number of Stadtwerke currently established within the country to approximately 900. With responsibility for more than half of the supply of electricity, gas and heat in Germany, these Stadtwerke play a central role in the transformation of the energy sector, or Energiewende. In addition, due to their local and regional ties, Stadtwerke have a particular role to play in energy politics, the economy and across society. This article focuses on the motives behind, and grounds for, the current wave of newly established Stadtwerke. Further, it discusses the factors that were critical to the successful formation of new Stadtwerke in recent years. The results of our survey indicate that the establishment of municipal Stadtwerke is a suitable measure to implement the energy transition at the local level, whereby the concept of public value has a high level of importance for the local decision-makers. Collaboration and cooperation, as well as a resilience-oriented strategy, are important success factors for new Stadtwerke.

Description: The need for a transition towards a circular economy (CE) is evident, as the current economic model is based on the exploitation of far more resources than the planet can replenish sustainably. A significant part of this economic transition is the inception of new, CE-oriented startups and business activities. While business model frameworks (BMF), such as the Business Model Canvas (BMC), were at the center of discussions about structuring business ideas in the beginning of the millennium, the conversation must now shift towards circular BMFs (CBMF). This paper follows the Design Research Methodology (DRM) for an empirical approach to devising a novel CBMF, including expert interviews as well as a first application of the framework with a startup. Throughout this process, a new and innovative tool called Circular Business Framework (CBF) was created and tested based on CE principles.

Description: The development of digital technologies is accelerating, enabling increasingly profound changes in increasingly short time periods. The changes affect almost all areas of the economy as well as society. The energy sector has already seen some effects of digitalization, but more drastic changes are expected in the next decades. Besides the very positive impacts on costs, system stability, and environmental effects, potential obstacles and risks need to be addressed to ensure that advantages can be exploited while adverse effects are avoided. A good understanding of available and future digital applications from different stakeholders' perspectives is necessary. This study proposes a framework for the holistic evaluation of digital applications in the energy sector. The framework consists of a combination of well-established methods, namely the multi-criteria analysis (MCA), the life cycle assessment (LCA), and expert interviews. The objective is to create transparency on benefits, obstacles, and risks as a basis for societal and political discussions and to supply the necessary information for the sustainable development and implementation of digital applications. The novelty of the proposed framework is the specific combination of the three methods and its setup to enable sound applicability to the wide variety of digital applications in the energy sector. The framework is tested subsequently on the example of the German smart meter roll-out. The results reveal that, on the one hand, the smart meter roll-out clearly offers the potential to increase the system stability and decrease the carbon emission intensity of the energy system. Therefore, the overall evaluation from an environmental perspective is positive. However, on the other hand, close attention needs to be paid to the required implementation and operational effort, the IT (information technology) and data security, the added value for the user, the social acceptance, and the realization of energy savings. Therefore, the energy utility perspective in particular results in an overall negative evaluation. Several areas with a need for action are identified. Overall, the proposed framework proves to be suitable for the holistic evaluation of this digital application.

Description: A clear understanding of socio-technical interdependencies and a structured vision are prerequisites for fostering and steering a transition to a fully renewables-based energy system. To facilitate such understanding, a phase model for the renewable energy (RE) transition in the Middle East and North Africa (MENA) countries has been developed and applied to the country case of Jordan. It is designed to support the strategy development and to serve as a guide for decision-makers. The analysis shows that Jordan has taken essential steps towards a RE transition. According to the MENA energy transition phase model, Jordan can be classified as being in a transitional stage between the first phase, "Take-Off Renewables", and the second phase, "System Integration". However, fossil fuels continue to play a dominant role in the Jordanian energy sector, and the fluctuating world market prices for fossil fuels impact the economy. The expansion of domestically produced RE could significantly contribute to reducing Jordan's high imports of fossil fuels. This simultaneously increases energy security and reduces the trade deficit. To move towards a sustainable energy system, Jordan needs to embrace comprehensive flexibility measures. These include developing storage options, improving load management, upgrading the existing grid infrastructure, enhancing energy efficiency, exploring the electrification of end use sectors, and creating strong cooperation between stakeholders.