ALBERT

Note: CONTENTS Abstract Preface Introduction Historical literature review Relationships between midwinter temperature and freezing season Mean freezing index 4 Average January air temperature U.S. comparative study Correlation of AJAT and duration of freezing season Relationships between average January air temperature and snow conditions U.S. relationships German relationships Mapping of average January air temperatures Analysis of observed AJ AT data Development of detailed maps Application and discussion Examples Influence of vegetation Literature cited Appendix A. interpretation of snow cover by satellite Appendix B. Contour, station elevation and Aj AT maps for East and West Germany

Note: CONTENTS Abstract Preface Nomenclature Introduction Experimental procedure Grain growth Stressed particle contacts Fluid pressure Packing geometry Temperature distribution and heat flow Fluid and impurity flows Results The liquid film Conclusions Literature cited

Note: CONTENTS Abstract Preface Nomenclature Introduction Background Experimental design Similitude considerations The model Model operation Results Velocity Fence height Porosity Model correlation Summary and conclusions Recommeqdations for future work Literature cited Appendix A

Note: CONTENTS Abstract Preface Introduction and statement of problem Review of relevant analyses and tests Determination of the largest ice force on an isolated structure Preliminary remarks The buckling analysis of a floating wedge Proposed method to determine Literature cited

Note: CONTENTS Abstract Preface Nomenclature Introduction 1. The problem 2. Abstract of the result Part I. Fundamental solutions 3. Fuchsian type solutions 4. Contour integral solution 5. Integration of the integral solution 6. Fundamental solutions for α = 1 7. Fundamental solutions for α = 0 8. Eigenvalues for α = 0 9. Fundamental solutions for α 〉 1 Part II. Asymptotic expansions 10. Asymptotic expansion for 0 〈 α ⩽1 11. Asymptotic expansion for 1 ≦ α ≦ 2 12. Asymptotic expansion for 2 ≦ α ≦ ∞ Part III. Eigenvalues 13. Range of eigenvalues 14. Eigenvalues for the free-edge condition 15. Eigenvalues for the clamped-edge and simple-edge conditions 16. Deflection Acknowledgement Literature cited Appendix A. Analytical continuation at the singular point Appendix B. Tensorial transformations Appendix C. Comparison of the semi-infinite plate buckling with the asymptotic buckling

Note: CONTENTS Abstract Preface Conversion factors: U.S.customary to metric units of measurement Introduction Freeze-thaw system Construction materials Controlled environment test section Outdoor sections Temperature monitoring instrumentation Repetitive plate bearing test apparatus Test results and analyses Conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction Locale and techniques Observations Vertical variations in crystal orientation Regional variations in crystal orientation Summary of observations Causes Initial ice skim Earth’s magnetic field Currents Conclusions and consequences Literature cited

Note: CONTENTS Abstract Preface Conversion factors Introduction Descriptions of road test sections Test equipment and procedures Field repetitive plate bearing tests Data analysis General Layered-elastic analysis of the pavement systems Statistical analysis Flexural analysis Summary and conclusions Literature cited Appendix A: Resilient surface deflections for the test points

Note: CONTENTS Abstract Preface Conversion factors Introduction Types of pipelines and cables Potential hazards to pipelines and cables Areas of concern Waterdepth Sea ice Icebergs and ice islands Submarine permafrost Ice gouging Seabed erosion by water jets Protection methods Protection of unburied pipes and cables Protection by burial Backhoe digging Wireline equipment Plowing and ripping from the surface Plowing and ripping by self-propelled seabed vehicles Bucket ladder dredges Suction dredging Conventional cutterhead dredges Low pressure water jetting Bottom-traveling cutterhead dredges Explosive methods Novel methods Disc saws, wheel ditchers and milling drums Ladder trenchers and chain saws Repetitive impulse devices High pressure water jets Flame jets and plasma torches Electrical discharge and electromagnetic radiation Chemical methods Conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction Experimental procedure Snow collection Spectrophotometric methods Data analysis Potential sources of error Presentation of results Continuous-scan measurements Comparison of sequential bandpass and continuous-scan measurements Theoretical calculations Discussion of results Differences in amplitude of reflectance measurements Irregularities in the shape of spectral reflectance curves The true spectral reflectance of snow in the ultraviolet region Conclusions Literature cited Appendix A. Absolute reflectance values of pressed BaSO4 powder

Note: CONTENTS Abstract Preface Introduction The protected membrane roof Winter construction considerations Construction costs Conclusion

Note: CONTENTS Abstract Preface Foreword Introduction Terminology Forces on individual cutters Torque force and tool force Forces on the rotor axis Tractive thrust and down thrust Alternative tool force formulations Vehicle traction Power/weight ratio Weight and balance Force, torque, speed and power Specific energy Efficiency and performance index Power density Power requirements for ejection of cuttings Hydrodynamic resistance in underwater cutting

Note: CONTENTS Abstract Preface Introduction Theory Limiting span of an arch Flow of pack ice through converging channels Stoppage of flow Applications St. Lawrence Amundsen Gulf Bering Strait Conclusion References

Note: CONTENTS Abstract Preface Introduction Previous work Methods and results Methods of analysis Salinity-chlorophyll a associations Discussion Comparison of ice and water column standing crops Estimated mass of ice associated chl. a Mechanism of ice algae formation in the Weddell Sea Differences between the biological environments of fast and drifting pack ice Conclusions Literature cited Appendix A. Species variations - ice and water column

Note: CONTENTS Abstract Preface Introduction Ice fog from cooling ponds Evaporation Relative humidity and cold air Ice fog suppression Air movement Plastic films Rafts Injection wells Cooling towers Chemical films Reinforced film experiments Meteorological data collection Floating reinforcement grid Application of the hexadecanol film Hexadecanol, octadecanol mixes Ethylene glycol monobutyl ether Laboratory tests of suppression effectiveness Conclusions Literature cited Appendix A. Design for an automatic thin chemical film applicationsystem Appendix B. Meteorological data

Note: CONTENTS Abstract Preface Introduction Site description Background and objectives Project history Approach General Aircraft imagery and sensor data LANDSAT imagery Ground truth data Results and discussion Remote sensing techniques Conventional techniques Comparison of results Conclusions Advantages and disadvantages Applications Recommendations Literature cited

Note: In kyrill. Schr. - Legende russ. u. engl.

Note: CONTENTS Page Abstract Preface Conversion factors: U.S. customary to metric (SI) units of measurement Background Objectives Profiling system Approach Profiling method Data reduction and interpretation Results Conclusions Recommendations Literature cited Appendix A. Comparison of ground and aerial data

Note: CONTENTS Abstract Preface List of symbols Introduction I. Initiation of ice jams by partial surface obstructions A. Introductory remarks B. Experimental apparatus and procedure C. Dimensional analysis D. Presentation of results and discussion ΙΙ. Thickness of ice jams due to accumulation and transport of ice floes A. Introductory remarks B. Experimental apparatus and procedures C. Presentation of results E. Conclusion III. Compressive strength of floating fragmented ice covers A. Introductory remarks B. Experimental setup and procedure C. Presentation of results and discussion D. Conclusions Literature cited Appendix A: Experimental results on ice jam initiation Appendix B: Effect of surface tension on submergence velocity of ice floes Appendix C: Experimental results for ice jam thickness study Appendix D: Experimental results on compressive strength of fragmented ice cover

Note: CONTENTS Abstract Preface Introduction Test sites and ice cover properties Beam testing Results Discussion Conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction Sources and properties of tabular icebergs Sources Characteristics of ice shelves near the ice front Characteristics of tabular icebergs Towing Geophysical and engineering considerations Tug characteristics Handling and processing Cutting and boring with thermal devices Penetration with electrothermal devices Electrothermal cutting Making vertical cuts by pre-split blasting Primary fragmentation by blasting Primary fragmentation by mechanical sawing Comminuting ice with machines Slurry pipelines Conclusion Literature cited

Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric units of measurement Introduction Impulse radar system Results and discussion Conclusions and recommendations Literature cited ILLUSTRATIONS Figure Relative locations where impulse radar measurements were made andsamples for moisture determinations were obtained on the CRREL roof Impulse radar signal reflected from metal sheet resting on roof Impulse radar signal reflection from roof at station A Impulse radar surface reflection coefficient versus moisture contentofroof Impulse radar signal reflection from aluminum foil on bottom of con-crete form and from aluminum sheet metal resting on top of form Unconfined compressive strength of concrete versus time Examples of X-Y plots of impulse radar signals obtained during thesounding of concrete slab Impulse radar signal reflection coefficients versus time for acuring concrete slab Calculated impulse radar signal attenuation in concrete slab versuselapsed time Dielectric constants versus time calculated from impulse radar signalInformation obtained during curing of concrete slab Unconfined compressive strength of concrete versus corrected reflec-tion coefficient calculated from impulse radar signal data obtainedduring the curing of concrete slab TABLES Comparison of roof moisture content with radar surface reflection coefficient and dielectric constant

Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric units of measurements Introduction The freezing proeess Icing observations Geographical distribution of icing and contributing meteorological conditions Extreme icing conditions Extremes of icc accumulation Prediction of icing occurrences Prediction of icing intensity and rate Control methods Measurement of icing rate Conclusions and recommendations Literature cited Appendix A. Maps of icing occurrence and rate Appendix B. Data for computing ship icing rates Appendix C. Estimation of ice accumulation

Note: CONTENTS Page Abstract Preface Summary Nomenclature Introduction Water movement through snow Vertical percolation Lateral flow Flat roofs Sloping roofs Rainfall intensity-duration effects Miscellaneous effects Radial flow to drains Flow along gutters on snow-covered roofs Snow structure Basal layer Conclusion Literature citied Appendix A. Computer program calculating roof loads from rain-on-snow

Note: CONTENTS Abstract Preface Summary Introduction Ice thickness and quantity Chronology of the 1975 Chena River breakup Checkpoint 3 Checkpoint 4 Checkpoint 5 Checkpoint 6 Checkpoint A Checkpoint 7 Checkpoint C Checkpoint D Checkpoint 8 Checkpoint 10 Checkpoint 11 Checkpoint 12 Spring flooding and debris The 1976 Chena River breakup Breakup in other years Summary and conclusions Appendix A. Sequential photographs of 1975 breakup at checkpoints 3-12

Note: CONTENTS Abstract Preface Nomenclature Conversion factors: U.S. customary to metric units of measurement Introduction Description of experiment Apparatus Test procedure Experimental results Summary of experimental tests Influence of coolant water flow rates Approximation of the rate of melting Comparison of experimental and computed results Comparative analysis of the model sinks Approximation of the heat transfer coefficient Conclusions and recommendations Literature cited Appendix A. Experimental data, heat sink Model II Appendix B. Heat sink scaling and similarity relationships Appendix C. Derivation of the relationships for the heat transfer coefficient, Reynolds and Nusselt numbers Appendix D. Determination of freezing rates and refrigeration loads Appendix E. Approximation of stresses in the heat sink tank

Note: CONTENTS Abstract Preface Conversion factors: U.S.customary to metric (SI) units of measurement Introduction Location of test sites Fairbanks Anchorage Hanover, N.H. Test program Instrumentation Effectiveness Therma lefficiency Heat balance within the roof Comparisons with conventional systems Conclusions Effectiveness of the test roof Thermal efficiency Heat balance within the roof Applicability Recommendations Literature cited Appendix A. Temperature and heat flow measurements, Anchorage and Fairbanks, Alaska, and Hanover, New Hampshire Appendix B. Thermal efficiencies of the test roof, Anchorage and Fairbanks, Alaska, and Hanover, New Hampshire Appendix C. January 1973 and August 1972 comparisons of protected membrane and conventional built-up membrane systems at Hanover, New Hampshire

Note: CONTENTS Abstract Preface Introduction Comparison of winters Ship effects Measured forces Sequential breaking of the structure Discussion Conclusions Recommendations Literature cited Appendix A. Force level fluctuations in west ice boom, 20 January 1977

Note: CONTENTS Abstract Preface Summary Introduction Background Objective and procedure Theory of plane surface waves Waveguide design and characteristics Physical apparatus Frequency characteristics Spatial distribution of Ey above the guide Guide wave length Surface wave interaction with a slab discontinuity Experiments with a trough Discussion and conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction The problem The solution Method of numerical integration Ramp/steady loading Curve fitting to time lapse deflections Asymptotic deflection Deflection profiles Acknowledgement Literature cited Appendix I. Analytical background Appendix II. Computer programs, ramp time profiles and steady time profiles

Note: CONTENTS Abstract Preface Nomenclature Introduction Segregation freezing Analysis Heat conduction in the nascent ice layer Water flow in the unfrozen soil Heat transfer in the unfrozen soil Energy balance at the segregation-freezing front Numerical computation Literature cited Appendix A. Essence of Portnov’s method Appendix B. Frost-heaving without air available

Note: CONTENTS Abstract Preface Introduction Test procedure Test program Test samples Number of test for determining strength index Effect of temperature Effect of sample length Effect of load point size Tests on snow Discussion Recommendations Literature cited

Note: CONTENTS Abstract Preface Conversion factors: US, customary to metric (SI) units of measurement Introduction Infrared camera Core samples State House State House Annex State Library Legislative Office Building Public Health Complex Highway Garage Fish and Game Offlces Supreme Court John O. Morton Building Department of Health and Welfare Laboratory Economics of roof reinsulation Conclusions and recommendations Literature cited

Note: CONTENTS Abstract Preface Foreword Introduction Terminology Principles of cutting Forces acting on a single cutter Theoretical Ideas on cutting Experimental data on cutting forces Effect of chipping depth on tool forces Effect of rake angle on tool forces Effect of relief angle on cutting forces Effect of side rake on tool forces Effect of base angle or face profile on tool forces Effect of rounding at the cutting edge Effect of tool width on cutting forces Tool compliance and force fluctuations Effect of tool speed on cutting forces Effect of rock properties on cutting forces Tool interaction and kerf spacing Effect of multiple pass cutting on tool forces Effect of tool wear on cutting forces Development of wear Energetics of cutting Energetics of parallel-motion tools Variation of specific energy with chipping depth for a single tool Effect of rake angle on specific energy Effect of relief angle on specific energy Effect of side rake on specific energy Effect of base angle or face profile on specific energy Effect of tip radius on specific energy Effect of tool width on specific energy Effect of tool speed on specific energy Variation of specific energy with rock properties Effect of kerf spacing on specific energy Effect of multiple pass cutting on specific energy Effect of tool wear on specific energy General summary Literature cited Appendix Α. Additional data for ice Appendix Β. Conversion factors: U.S. customary and metric units of measurement

Note: Inhalt Vorwort 1. Beiträge zu den geologisch orientierten Arbeitsgruppen 4, 7, 9 1.1. OLSZAK, G.: Zur strukturellen Umformung der Erdkruste bei der Entwicklung regionaler tektonischer Elemente 1.2. PAECH, H.-J.: Kurzer Tätigkeitsbericht über geologische Arbeiten in der westlichen Antarktis (Shackleton Range) 1.3. JUBITZ, K.-B.: Die Entwicklung des Amadeus-Beckens in Zentralaustralien - Beckendynamik im Bereich alter Tafeln 1.4. TESCHKE, H.-J.: Sarmato-Turan-Lineament 1.5. SCHROEDER, E.: Probleme der Entwicklung und des Baues der Varisziden in Mitteleuropa und im Gebiet der UdSSR 1.6. SOHROEDER, E.: Beiträge zur vergleichenden Analyse tektonischer Strukturen im Variszikum des Südurals und Mitteleuropas 1.7. SCHWAB, G.; BENEK, R.; BRÜCKNER, W.; JUBITZ, K.-B.; LUDWIG, A.; MEIER, R.; NÖLDEKE, W.; STOLL, A.; TESCHKE, H.-J.: Beckendynamik der Norddeutsch-Polnischen Senke - Paläomobilität im Bereich einer jungen Tafel (Fortschrittsbericht) 1.8. JUBITZ, K.-B.; TESCHKE, H.-J.: Das IGCP-Projekt 86 "SW-Rand der Osteuropäischen Tafel" und seine Beziehungen zum Geodynamik-Projekt 1.9. KRAUSS, M.: Ein Beitrag zur paläotektonischen Abgrenzung, Gliederung und Entwicklung des westlichen Teils der Osteuropäischen Plattform während des Paläozoikum (Gebiet Dänemark - Baltikum) 1.10. LÜTZNER, H.: Sedimentation, Vulkanismus und Tektonik der variazischen Innenmolasse im Thüringer Wald - Studien zur Paläomobilität im Übergangsstockwerk zwischen Geosynklinal- und Tafeletappe im Gebiet der DDR 1.11. LÄCHELT, S.: Geologisch-tektonisch-magmatische Entwicklung und metallogenetische Prozesse 1.12. KRAMER, W.: Zu einigen basischen magmatischen Formationen im Gebiet der DDR und deren geotektonischer sowie metallegenetischer Bedeutung 1.13. RÖSLER, H.J.; WERNER, C.-D.: Variazische Initialmagmatite Mitteleuropas 1.14. BENEK, R.: Vulkanit-Formationen als Indikatoren der Krustenfelderung bzw. unterschiedlichen Mobilitätsverhaltens 1.15. BANKWITZ, P.: Überblick über Magmatismus und Metamorphose im Altpaläozoikum Mittel- und Westeuropas 1.16. LÄCHELT, S.: Beziehungen zwischen der Blocktektonik, dem Magmatismus und der endogenen Metallogenie im mitteleuropäischen Raum 1.17. PAECH, H.-J.: Zum Ablauf tektogener Deformationen im mitteleuropäischen Variszikum 1.18. BANKWITZ, P.; BANKWITZ, E.; FRISCHBUTTER, A.: Zur Tektonik des Präkambriums der Elbezone und ihres Rahmens 1.19. BENEK, R.; FRISCHBUTTER, A.; NEUMANN, W.: Methodische Arbeiten im Kristallin des Baikal-Riftes 1.20. NEUMANN, W.: Paläogeographie und Paläotektonik des Nossen-Wilsdruffer Schiefergebirges (Saxothuringikum im Bereich des Zentralsächsischen Lineamentes) 1.21. LUDWIG, A.O.: Paläogeographie und Paläotektonik des Saxen von Mitteleuropa 1.22. MEIER, R.: Halogenese und Beckendynamik 1.23. BANKWITZ, P.; BANKWITZ, E.: Geologische Interpretation rezenter Krustenbewegungen Osteuropas 1.24. LUDWIG, A.O.: Zum gegenwärtigen Stand der Quartärforschung im südlichen Ostseeraum - Paläogeographie, Neotektonik, Aussagen zur Paläotektonik 1.25. ELLENBBRG, J.; FALK, F.; GRUMBT, E.; LÜTZNER, H.: Methodik der Untersuchungen von Molassen 1.26. NEUMANN, W.: Geologisches Modell zur Interpretation des tiefenseismischen NW - SE-Profils zwischen Granulit- und Erzgebirge 2. Beiträge zu der geophysikalisch-geodätisch orientierten Arbeitsgruppe 5 2.1. BÖLSCHE, J.; KRESSER, K.-D.: Erste Ergebnisse reflexionsseismischer Tiefenerkundung auf einem Profil von 30 km Länge im Süden der DDR 2.2. GRÄSSL, S.; HURTIG, E.; GRÜNTHAL, G.: Untersuchungen zum Bau der Erdkruste mit Hilfe seismischer Dreikomponentenregistrierungen 2.3. SCHULZE, A.: Untersuchungen zur Auflösung von Interferenzstrukturen seismischer Wellen mit Hilfe von Polarisationsfiltern 2.4. GROSSER, H.: Einfluß der Geometrie seismischer Punktwellen auf den Spektralinhalt des Wellenfeldes 2.5. STILLER, H.; WAGNER, F.C.; VOLLSTÄDT, H.: Die Geschwindigkeiten elastischer Wellen im klüftigen Gestein und in Erdbebengebieten 2.6. GRÜNTHAL, G.; HURTIG, E.: Zur .makroseismischen Auswertung des Friaul-Erdbebens vom 6. Mai 1976 auf dem Territorium der DDR 2.7. NEUNHÖFER, H.: Observation of microearthquakes in the Vogtland region since 1962 2.8. MAAZ, R.: Zur Statistik von Erdbeben 2.9. ELSTNER, CL.; HARNISCH, G.; ALTMANN, W.: Präzisionsgravimetrische Messungen auf der W - E-Linie der DDR 1970-76 2.10. FISCHER, H.; NEUBERT, R.: Instrumentelle Entwicklungen auf dem Gebiet der Laser-Satellitenentfernungsmessung 2.11. MONTAG, H.; GENDT, G.: Zur Untersuchung geodynamischer Parameter mit Hilfe von Satellitenbeobachtungen 2.12. JOCHMANN, H.: Betrachtungen zur Variation einiger Parameter der Polbewegung 2.13. HÖPFNER, J.: Untersuchungen von Amplituden- und Phasenänderungen der CHANDLER-, Jahres- und Halbjahreswelle 2.14. ARNOLD, K.: Einige Betrachtungen zum Auftreten und zur Bedeutung von Lateralinhomogenitäten der Dichte im Erdinneren 2.15. WALZER, U.: Report on mantle convection 2.16. SEIPOLD, U.: Messungen der thermischen Eigenschaften von Gesteinen unter extremen Bedingungen 2.17. ULLMANN, W.: Thermische Zustandsgleichung und GRÜNEISEN-Parameter zur Erforschung des tiefen Erdinneren 2.18. DITTFELD, H.-J.: Experimentelle Aussagen zum dynamischen Effekt des flüssigen Erdkerns 2.19. KOWALLE, G.: Untersuchung zur Dämpfung seismischer Wellen im Erdkern 2.20. DONNER, F. ; GÖTHE, W.; KNOTHE, C.; OELSNER, C.; PORSTENDORFER, G.:Beiträge der Tiefenelektromagnetik, Tiefenseismik und Geothermie zum Geodynamik-Projekt 2.21. HURTIG, E.; STROMEYER, D.: Temperatur-Tiefenverteilung und Viskosität im oberen Erdmantel unter Europa 2.22. OELSNER, C.: Eine Wärmestromanomalie im Gebiet von Freiberg (Sachsen) (in memorian Ferdinand Reich) 2.23. STROMEYER, D.: Studien zur Inversion geothermischer Daten 2.24. MAYER, P.: Einige Ergebnisse magnetisoher Messungen· im Nordatlantik 2.25. MENNING, M.: Tektonische Untersuchungen mit Hilfe der paläomagnetischen Bearbeitung von Bohrkernen 2.26. ROTHER, K.; WIEGANK, F.: Zur Interpretation paläomagnetischer Daten von Europa 2.27. MUNDT, W.: Zum Nachweis lokaler Säkularvariationsanomalien im Gebiet der DDR 2.28. MUNDT, W.; PORSTENDORFER, G.: Mögliche Zusammenhänge zwischen einer elektrischen Leitfähigkeitsanomalie im Erdmantel und anomalen magnetischen Säkularvariationen in Mitteleuropa 2.29. RITTER, E.: Zum Problem geoelektrischer Leitfähigkeitsanomalien und Tiefenbau von Kruste und oberem Mantel 2.30. HARWARDT, H.: Aufbau einer Strainmeteranlage in der Untertagestation Tiefenort 2.31. HARNISCH, G.: Zur Autokorrelationsfunktion der rezenten vertikalen Krustenbewegungen 2.32. THURM, H.; BANKWITZ, P.; HARNISCH, G.: Rezente horizontale Deformationen der Erdkruste im Südostteil der Deutschen Demokratischen Republik 2.33. KAUTZLEBEN, H.: Zur geophysikalischen Interpretation der planetaren Dynamik der Erde 3. Ergänzende Literatur 3.1. Untersuchung zur Geologie und Geophysik von Meeresböden (WG 4) 3.2. Rezente Erdkrustenbewegungen (WG 5) 3.3. Beziehungen zwischen Metamorphose und Tektonik (WG 9) 4. Autorenverzeichnis , Beiträge teilweise in deutscher, teilweise in englischer Sprache

Note: Contents: Preface to the Second Edition. - Preface to the First Edition. - 1. INTRODUCTION AND HISTORICAL BACKGROUND. - History. - The Discovery of X-Rays. - The Discovery of X-Ray Diffraction. - History of Clay Mineralogy. - The Importance of Clay Mineralogy. - Box 1.1 Clay Minerals as Catalysts. - The Literature of Clay Mineralogy. - Summary. - References. - 2. NATURE AND PRODUCTION OF X-RAYS. - Box 2.1 Other Methods. - Safety and Protection. - Box 2.2 Defining a Dose of Radiation. - The Nature or X-Rays. - Continuous or White Radiation. - Characteristic Radiation. - General Absorption of X-Rays. - Characteristic Absorption. - Equipment for Producing and Recording X-Rays. - Stabilizing the Voltage. - Generating X-Rays. - The Diffractometer. - Step-Scanning with Automated Diffractometers. - The Single-Crystal Monochromator. - The Detector. - Signal Processing Circuitry. - The Strip-Chart Recorder. - An Example of a Checklist for Operating XRD Equipment. - Summary. - References. - 3. X-RAY DIFFRACTION. - Scattering. - Interference. - Scattering from a Row of Atoms. - Scattering from a Three-Dimensional Array of Atoms. - Bragg's Law. - Box 3.1 Diffraction and Reflection. - The Arithmetic of Scattering. - The Summation of Scattering Amplitudes. - The Structure Factor F. - Information from Intensity. - The Reciprocal Lattice. - Real versus Idealized Peaks on XRD Tracings. - The Interference Function F: Diffraction from a Crystal. - Whose Unit Cell Has a Unitary Scattering Factor. - The Lorentz-Polarization Factors. - Putting It All Together—Building an 001 Diffraction Pattern. - Exercise: Calculation of the Intensity from d(001) for Illite. - Points to Remember. - References. - 4. STRUCTURE AND PROPERTIES: GENERAL TREATMENT. - General Structural Features. - Tetrahedral Sheets. - Octahedral Sheets. - Dioctahedral and Trioctahedral. - Joining the Sheets. - Stacking the Layers. - Properties. - Total Charge, Layer or Permanent Charge, and Variable Charge. - Electric Double Layer. - Exchangeable Ions or Cation-Exchange Capacity. - Interaction of Water with Clay Mineral Surfaces. - Interaction with Organic Compounds. - Classification. - Box 4.1 Nomenclature. - References. - 5. STRUCTURE, NOMENCLATURE, AND OCCURRENCES OF CLAY MINERALS. - The Individual Clay Minerals. - The 1:1 Layer Type. - Serpentine minerals. - Berthierine. - Odinite. - Kaolin minerals. - Box 5.1 Uses of Kaolinite. - Allophane and imogolite. - The 2:1 Layer Type, x = 0. - The 2:1 Layer Type, x ~ 1. - The trioctahedral subgroup. - The dioctahedral subgroup. - The 2:1 Layer Types with x 〈 1. - Illite. - Glauconite. - Smectite. - Box 5.2 Alteration of Ash-Fall Layers. - Vermiculite. - Chlorite. - Mixed-Layered Clay Minerals. - Mixed-layering, interlayering, and interstratification. - Illite/smectite (I/S). - Box 5.3 Reichweite or Ordering. - Models for smectite-to-illite transition. - MacEwan crystallite model. - Fundamental particle model. - Two-solid-solution model. - Chlorite/smectite (C/S). - Serpentine/chlorite. - Kaolinite/expandables (K/E). - Sepiolite and Palygorskite. - The Origin of Clay Minerals. - Summary. - Exercise: Calculating Structural Formulas. - Exercise: Making Structural Models of Layer Silicates. - References. - 6. SAMPLE PREPARATION TECHNIQUES FOR CLAY MINERALS. - Evaluating the Sample. - Disaggregating the Rock. - Separating Clay Minerals from Clastic Rocks. - Separating Clay Minerals from Carbonate Rocks. - Separating Clay Minerals from Sulfate Rocks. - Separating Clay Minerals from Unconsolidated Materials. - Box 6.1 Glacial Deposits, North American Interior. - Chemical Pretreatments. - Removal of Iron Oxides. - Removal of Organic Materials. - Saturating the Clay Minerals with Different Cations. - Particle-Size Separation. - Preparing the Oriented Clay Mineral Aggregates. - The Glass Slide Method. - The Smear Mount Method. - The Millipore® Filter Transfer Method. - The Centrifuged Porous Plate Method. - Dealing with Curlers or Peelers. - Making the Random Powder Mount. - Everyday random powder packs. - Freeze-dried random powder packs. - Ethylene Glycol Solvation. - Final Note. - References. - IDENTIFICATION OF CLAY MINERALS AND ASSOCIATED MINERALS. - Clay Mineral Identification—General Principles. - Illite and Glauconite. - Chlorite and Kaolinite. - Vermiculite. - Smectite. - Sepiolite, Palygorskite, and Halloysite. - 060 Reflections. - The Use of hkl Reflections for the Determination of Polytypes. - Chlorite Polytypes. - The Kaolin Polytypes. - The Micas, Illite, and Glauconite. - Nonclay Minerals. - Silica Minerals. - Feldspar. - Zeolites. - Carbonates. - Apatite, Pyrite, and Jarosite. - Gypsum, Anhydrite, Celestite, and Barite. - Lepidocrocite, Goethite, Gibbsite, and Anatase. - Summary. - References. - 8. IDENTIFICATION OF MIXED-LAYERED CLAY MINERALS. - Méring's Principles and Mixed-Layered Nomenclature. - The Q Rule, a Broadening Descriptor. - Mixed-Layered Clay Minerals. - Illite/Smectite. - Chlorite/Smectite and Chlorite/Vermiculite. - Kaolinite/Smectite. - Serpentine/Chlorite. - Mica/Vermiculite. - Summary. - References. - 9. QUANTITATIVE ANALYSIS. - Required Sample Characteristics. - Sample Length. - Sample Thickness. - Sample Position. - Homogeneity of the Sample. - Equations for Quantitative Analysis. - Basic Quantitative Diffraction Equation. - Derivation of a Working Form of the Equation for Analysis. - The Method of the Orienting Internal Standard. - Mineral Reference Intensities. - General Comments. - Calculated Mineral Reference Intensities. - Practical Examples of the Application of Reference. - Intensities. - Measurement of Peak Intensity. - Comments and Summary. - References. - 10. DISORDER IN SMECTITE, ILLITE/SMECTITE, AND ILLITE. - Small Crystals in Reciprocal Space. - Turbostratic Disorder. - Theory. - Smectite. - Illite/Smectite. - Rotational Disorder in Illite and Illite/Smectite. - Cis-Vacant Elite and Interstratified Cis- and Trans-Vacant. - Illite/Smectite. - Conclusions. - References. - APPENDIX: MODELING ONE-DIMENSIONAL X-RAY PATTERNS. - The Input Variables. - Simulating the Instrument. - Describing the Clay Mineral. - Theory. - Structures of the Component Layers. - Advanced Techniques. - Pure Minerals. - Compositional Superstructures. - Layer Types Not Specifically Included. - Atom Types Not Incorporated in the Model. - Defect Broadening. - References. - INDEX.

Note: Table of Contents: Climate and American People. - Earth's climate: A dynamic system. - Why does earth's climate change?. - Can we change the climate?. - The Greenhouse Effect. - Why are Greenhouse gas amounts increasing?. - Aerosols: Sunscreen for the planet?. - How has climate changed in the past century?. - Can we predict climate change?. - What do climate models tell us about our future?. - Where do we go from here?

Note: CONTENTS Abstract Preface Introduction Plattsburgh Air Force Base Radar sounding system Survey procedure Cavity inspection Radar cavity detection test Radar profile results Falling-weight deflectometer tests Discussion and conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction Finite differences applied to heat transfer Heat conduction equation Boundary conditions Phase change Computer program ADDATA, the data subroutine TRIDIG, the matrix solver ISOTHM, the isotherm finider ADI, main program ADEPC, main program Verification of ADI Comparison of ADI with analytical results Comparison of ADI with experimental results Verification of ADIPC Comparison of ADIPC with analytical results-the Neumann solution Comparison of ADIPC with analytical results-two-dimensional phase change verification User instruction for ADI User instruction for ADIPC Conclusions Literature cited Appendix A. Program INFSUM and sample input and output for program ADI Appendix B. Program ADIPC and sample input and output

Note: TABLE OF CONTENTS: Abstract. - Acknowledgments. - List of Figures. - List of Plates. - List of Tables. - Value of Microparticle Studies. - Reasons for Variations in Particle Concentration. - Laboratory Techniques. - Particle Concentration and Size Distribution. - Sample Preparation. - Contamination. - Particle Counters. - Laboratory Procedures. - Particle Composition. - Sample Preparation. - Types of Particles and Their Seasonal Variation. - Particle Types. - Variations of Particle Concentrations. - Antarctic Peninsula. - Marie Byrd Land. - Quelccaya Ice Cap, Peru. - Annual Layers in Deep Ice Cores. - Chronologies for the Byrd and Camp Century Deep Ice Cores. - The Byrd Station Deep Ice Core. - Age Calculation. - Discussion. - The Camp Century Deep Ice Core. - Vertical Strain Rates. - Age Calculation. - Discussion. - Morphology and Elemental Composition of Microparticles. - Data Analysis. - Results. - Discussion. - The Relationships Among Dust, Oxygen Isotopes and Climate. - Microparticle Variations Over Millennial Time Invervals. - Dust, Oxygen Isotopes and Climate. - Discussion. - Is There A Relationship Between Volcanic Activity and Climatic Change?. - General. - Theory. - Supportive Evidence. - Cycles. - Discussion. - Suggestions for Future Work. - Conclusions. - References. - Appendix A. - Appendix B. - Appendix C. - Appendix D.

Note: Contents: Membership of the National Committee on Antarctic Research in the Federal Republic of Germany. - Introduction. - Stations. - I. Record of Activities (past and ongoing), April 83-October 84. - II. Planned Activities, October 84-October 85. - References.

Note: Contents: Membership of the National Committee on Antarctic Research in the Federal Republic of Germany. - Introduction. - Stations. - I. Record of Activities (past and ongoing), April 82-October 83. - II. Planned Activities, October 83-October 84. - References.

Note: Contents Abstract Preface Introduction Natural ice sheets Choosing an ice control structure Flexible structures Ice booms Frazil collector lines Fence booms Rigid or semirigid structures Pier-mounted booms Stone groins Artificial islands Removable gravity structures Timber cribs Weirs Pilings and dolphins Structures built for other purposes Hydroelectric dams Wicket dams Light piers and towers Bridge piers Breakwaters Ice control not using Structures Channel improvements Ice sheet tying Ice sheet bridges Conclusions Literature cited Appendix A: Ice control structure

Note: CONTENTS Abstract Preface Introduction Stream bank erosional processes Permafrost and related factors Permafrost and erosion General Erosional processes Bank zone processes Bluff zone processes Factors affecting perm afrost erodibility Exposure to currents and wind waves Texture and stratigraphy Ice content, distribution and type Slope aspect Coriolis force Timing and depth of thaw Water level and temperature Vegetation Ice and snow cover Groundwater Rates and timing of erosion and recession Overall effects of permafrost Recommendations for research Literature cited Appendix A : Processes of stream bank modifications

Note: CONTENTS Abstract Preface Nomenclature Introduction Constitutive relationships Equations of motion Uniform flow Nonuniform flow Ice transport: Uniform flow Symmetric channel Asymmetric channel Ice transport: Nonuniform flow Further considerations Basis for model improvement Conclusions Literature cited

Note: COTENTS Abstract Preface Nomenclature Introduction Model characteristics and test conditions Ice-hull coefficient of friction Measurements of ice properties Experimental procedures Data acquisition system Test program and procedures for 1:10 model Test program and procedures for 1:24 model Analysis of test results Comparison of test results between 1:10 and 1:24 models Analysis of tests in broken or brash-filled ice channels Analysis of tests in level ice Full-scale prediction of level ice resistance Conclusions Literature cited

Note: CONTENTS Abstract Preface Nomenclature Introduction Dielectric properties of sea ice Time-domain spectroscopy measurement Laboratory measurements Field measurements Analysis of ladder data Conductivity of brine and sea ice Complex dielectric constant of brine and sea ice Discussion and conclusions Literature cited

Note: CONTENTS Abstract Nomenclature Introduction Principal relationships Constitutive equation Failure criteria Secondary creep: Flow equations Creep at constant stress (σ = Const.) Creep model Creep strain (σ = Const.) Creep at constant strain rate (ϵ = Const.) Stress-strain relationship Stress/strain/strain rate at failure Test data Preliminary analysis Constant stress tests (σ = Const.) Constant strain rate tests (ϵ = Const.) The principle of superposition Thermodynamic equation of creep Conclusions Literature cited

Note: CONTENTS Abstract Preface Introduction St. Marys River Ice problems Remedial measures Field studies Highlights, trends, and major findings Modifications to boom Maximum forces Ship traffic Characteristics Effect of boom forces Effect on ice Conclusion Literature cited Appendix A: Ice boom forces

Note: CONTENTS Abstract Preface Nomenclature General background The problem Method of solution Results and discussion Conclusions Literature cited Appendix: Evaluation of rn's in equation 25

Note: Contents Abstract Preface Introduction Materials and methods Results Discussion Conclusions Literature cited Appendix A: Taxonomic terms Appendix B: Differences in species composition and abundance in duplicate samples examined under optical and inverted light microscopes Appendix C: Morphologic descriptions and SEM micrographs

Note: CONTENTS Abstract Preface Introduction Experiments Test flume facility Experimental apparatus Experimental procedure Results Plastic versus freshwater ice Shoreline forces Boom forces Average shear stress under ice cover Internal forces Discussion Data scatter Summary and conclusions Literature cited Appendix A: Experimental results

Note: CONTENTS: Flight plan 1998. - C130 schedule. - NGRIP 1998 schedule. - Overview of 1998 schedule. - Camp setup. - Quartering and buildings. - Number of field participants. - NGRIP 1998 sub programs. - SITREP. - Term of reference for the NG RIP field work. - Accidents and illness. - Mail to NGRIP participants. - Cargo shipments to Greenland. - Personnel transport 1998. - Booze and drugs. - Vacation in Greenland. - Shipping boxes. - Welcome to the NGRIP camp. - List of participants. - NGRIP camp load. - Kangerlussuaq and the surrounding area. - Thule Air Base, Greenland, Base Operations. - Other useful information for Thule passengers. - Uplift 1998. - Typical specifications for LC-130 and Twin Otter. - Useful data. - Coordination of C-130 in Kangerlussuaq. - Aviation weather reports. - Typical communication plan. - Summary of frequencies used in Greenland. - Phonetic alphabet. - Personal field equipment. - Operation of NERA lnmarsat M terminal. - Map of NGRIP camp. - NGRIP trenches. - Map of NGRIP area. - Map of Greenland. - Map of the ice divide north of GRIP. - Map of the magnetic declination in Greenland. - Density vs temperature of hole liquid. - Surface measurements near NGRIP. - Positions in Greenland. - Relevant distances and directions. - List of NGRIP addresses.

Note: Contents Abstract Preface Nomenclature Introduction Test objectives Experimental setup and procedures Facilities Test fixture Data acquisiton system Ice sheets Measurement of ice properties Daily test summary Experimental results and discussion Observations Ice force records Frequency of ice force variations Discussion Maximum crushing forces Mean effective pressure or specific energy of ice in crushing Failure energy of ice Ratio of maximum force to mean force Summary and conclusions Literature cited Appendix A: Data for continuous crushing tests

Note: CONTENTS Abstract Preface Summary Chapter 1. Introduction Location Purpose of study Previous work Chapter 2. Methodology Geology Overland erosion Wave erosion Frost penetration and heave Thaw failure Bank recession Ground water Soil moisture Chapter 3. Results Geology Geotechnical properties Overland erosion Wave erosion Freeze-thaw phenomena Ground water fluctuations Other slope failures Chapter 4. Discussion Overland erosion Wave erosion Thaw failure Universal soil loss equation Chapter 5. Summary and conclusions Techniques Erosion processes at Orwell lake Bank recession Literature cited Appendix A1: Average cumulative change of surface at erosion stations #2-12, 1980-81 Appendix A2: Cumulative net changes at overland erosion stations #1-12, 1980-81 Appendix A3: Cumulative net changes at overland erosion stations #1 -12, 198 1-82 Appendix A4: Cumulative average erosion at overland erosion stations #1-12, 1980-81 Appendix AS: Cumulative average erosion at overland erosion stations #1-12, 1981-82 Appendix A6: Cumulative average erosion at overland erosion stations #1 -1 2A, 1982 Appendix B: Dimensions of erosion sections, Orwell Lake, Minnesota Appendix C: Piezometer installation data, Orwell Lake, Minneso

Note: CONTENTS Abstract Preface Introduction Location of study Study methods Ice thickness Ice-cover composition Surface air temperatures Freeze-up and ice-out characteristics Results and discussion Ice-growth record Freezing-degree-day records Ice-growth predictions Summary and conclusions Literature cited Appendix A: Ice-growth records Appendix B: Measured and computed ice-growth curves

Note: Contents of Part 1 S. Niese: Reactor neutron activation analysis of industrial materials R.P. Gardner, K. Verghese: Use of Monte Carlo methods in the calibration and design optimization of radiation gauges and analyzers R. Otto, P. Hecht: On labelling with generator nuclides M. Richter: Measurement of residence time distribution with radiotracers using periodic pseudo-random binary signal sequences J. Schoen: A computer code for tracer experiment data analysis H.-H. Deicke, J. Flachowsky, K.-P. Rudolph, N. Beiermann: Transit time measurements in technical plants by using a multichannel analyzer H. Bohne: Measurements of air currents L. Baranyai: Tracer study of simultaneous homogenization and segregation in industrial equipments N. Balabanov, N. Kapitanova: Application of radiotracer method for study of glass furnaces J. Thẏn: Evaluation of mixing particulate solids by radiotracer method H.-G. Koennecke, P. Kulicke, E. Antal, J. Jentzsch, H. Michael: Investigation of the mixing efficiency of kneading machines using radionuclides A.G. Belov, V.E. Zhuchko, Yu.S. Zamyatnin, Yu.G. Teterev, D. Rubio: Development of the nuclear-physical methods of analysis at the laboratory of nuclear reactions of the JINR R. Burek, K. Wojcik: A new concept for measuring of free moisture in solid materials N. Bachvarov, I. Georgiev, E. Manolov, P. Pavlov, H. Shukov, K. Tropolov: Process control system for fresh concrete preparation H. Baumbach: Investigation of moisture migration in the concrete of a special test construction under simulated load conditions A. Petrov, A. Sreno, H. Hristov, P. Penev, G. Georgiev: Beta-ray backscatter instruments for coating thickness measurements in electronic and electrotechnical industry W. Stuchlik, H. Kupsch: Radioactive level indicator for bulk materials in containers with calculation of the residual volume H. Baumbach, K. Fichtler, R. Melzer, D. Tietze, H. Ullrich: The determination of density variation in radiation protective walls of concrete by means of Bremsstrahlung of 1o MeV from linear accelerator D. Avramov: Modernized versions of mobile NDT laboratories V. Friedrich: Examples for radioisotope application in environment protection St. Szpilowski: Prediction of mixing length for transport of effluent in rivers A. Owczarczyk: The localization of the leakages through the dams and bottoms of large water reservoires W. Listwan: Progress in leak detection methods for underground pipelines and tanks J. Starẏ, A. Zeman, B. Havlik: Radionuclides in the investigation of the cumulation of toxic elements on alga and fish W. Richter, D. Kahl, H.-J. Grosse, F. Gleisberg: The use of an AIG-analyzer for the investigation of SO2-dispersion problems R. Goeldner, H.-J. Grosse, F. Gleisberg: Possibilities of the development of improved smoke detectors J. Adler, H.-R. Doering, H.-J. Grosse, F. Gleisberg: The use of the AIG in microelectronics P. Popp, R. Fahnert, S. Mothes, G. Oppermann: Methods for the determination of toxic compounds at work places H.-R. Doering. H.-J. Grosse: The detection of halocarbons by means of the aerosol ionization gas analyzer (AIG) E, Jaworska, I. Kaluska, G. Strzelczak: Crosslinking and free radical decay reactions in irradiated polyethylene in presence of additives J. Zahalka: Radiation modified materials in machine engineering W. Bobeth, R. Hanke, A. Heger, J. Morgenstern, H. Paessler: Technological aspects of planar structurizing on woven and knitted fabrics by localized radiation induced grafting B. Ihme, E. Maeder, A. Mally: Problems in the development of high-energy radiation processing of woven and knitted fabrics S. Nikolov. P, Panayotov, V. Diakova, M. Nikolova: Radiation modification of timber in people's republic of Bulgaria H. Dahlhelm. G. Matejko. G. Huebner: Experiments on sprouting inhibition in onions J. Thẏn: Process analysis with nuclear technique A. Merz: Axial dispersion and homogenization in chemical engineering systems A. Zeuner, F. Hartmann: Investigation of material transport in rotating dryers by aid of Lanthanum-140 D. Manr: Tracer research for modelling of Ion-exchange equipment

Note: Contents of Part 2 Hecht, K. Gerber, R. Otto: Studies on the drying of paints by means of 14C-labelled compounds K. Wagner, F. Brutschin, I. Ritter, T. Gritsch, H. Zimmermann, H. Borchert: Investigations by the aid of radioisotope methods on the technology of the production of carbon and silicon carbide materials K. Gloe, P. Mühl: Determination of metal extraction process parameters using tracer technique W. Migdał, W. Łada, K. Malec-Czechowska: Studies on liquid-liquid extraction of noble metals using radiotracers L. Petryka, K. Przewłocki: Radiotracer investigations of benefication copper ore in the industrial flotation process Z. Bazaniak, J. Palige: Determination of Cu recovery degree from slags in shaft process by means of radiotracers R. Burek, J .K. Zurawicz: On the optimization of concentration measurements in heterogeneous materials based on β-backscatter measurements B. Heinrich: Analysis of carbon content in crude brown coal by inelastic scattering of neutrons and the method of time correlated associated particles P. Urbańaki, D. Wagner, M. Jankowska, E. Kowalska: Determination of calcium and iron and measurements of ash content in the brown coal H.-W. Thümmel: Some considerations relating to the prediction of the efficiency of radiometric methods for the continuous ash content determination of coal L. Wawrzonek: Monitor of ash content of coal with X-ray source I. Pavlicsek, V. Stenger, A. Veres: Apparatus for gamma activation analysis I. Végvári, I. Juhász: Determination of PbO content of lead-glass samples on the ground of gamma-absorption E. Schöntube, H.-J. Große: Aerosol ionization gas analysis as a monitoring for waste halothane in the atmosphere of operating theatre S. Mothes, P. Popp, G. Oppermann, W.-D. Herberg: Measurement of fluorocarbons with the ECD P. Popp, E. Schöntube, G. Oppermann: The usability of radiation ionization detectors for the determination of N2O concentrations in the air of operating theatres P. Popp, G. Arnold, G. Oppermann: A hydrocarbon-sensitized argon ionization detector for the detection of inorganic compounds R. Szepke, W. Lisieski, J. Harasimczuk: Automatic dust monitor AMIZ G. Vormum: Sealed sources - problems of design, measurement and quality control L. Gąsiorowski: New trends in developments of ratioisotope gauges in Poland G. Brunner: Direct chemical information from special radio tracers as well as from outer X-ray excitation J. Hirling: Experience and future trend in industrial application of nuclear methods in Hungary I. N. Ivanov, O. K. Nikolaenko, Yu. V. Phecktistov, V. L. Chulkin: Use of short-lived nuclides in activation analysis Kl.-P. Rudolph, J. Flachowsky, A. Lange: Trace element determination in semiconducter selenium by neutron activation analysis (NAA) W. Lisieski, J. Mirowicz: Some industrial applications of instruments with neutron sources R. Dybczyński, H. Maleszewaka, S. Sterliński, Z. Szopa, M. Wasek: Some problems in neutron activation determination of gold and silver in ores and concentrates of copper industry L. Jankowski: Cost-benefit aspects of radioisotope application in industry B. Manouchev, T. Boschkova, L. Tsankov, V. Gurev, I. Kojucharov, G. Grozev: On the possibilities of the direct gamma-spectremetry in natural waters P. Morgenstern, D. Müller, W. Riedel: A parallel grid proportional scintillation counter for the X-ray region from 3 to 20 keV with regard to high count rates N. A. Anders, V. S. Isaev, V. I. Filatov, B. E. Kolesnikov, D. Müller, P. Morgenstern, W. Riedel, V. P. Varvaritsa: X-ray fluroescence analyzer of light elements with proportional scintillation counter D. Müller, P. Morgenstern, W. Riedel, W. Warwariza, B. E. Kolesnikow, N. A. Anders, W. J. Filatov: General considerations concerning the use of the X-ray analyzer "RALE" in industry