ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Books  (126)
  • Articles
  • Data
  • English  (125)
  • Finnish  (1)
  • Italian
  • Swedish
  • 2010-2014
  • 2005-2009
  • 1995-1999
  • 1980-1984  (54)
  • 1975-1979  (71)
  • 1935-1939  (1)
  • 1925-1929
  • 1997
  • 1984  (22)
  • 1983  (32)
  • 1977  (25)
  • 1976  (46)
  • 1936  (1)
  • 1929
  • 1925
  • AWI Library  (126)
  • AWI Archive  (126)
  • 1
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/8
    In: CRREL Report, 77-8
    Description / Table of Contents: A broadbanded impulse radar system was used for aerial detection of accumulated frazil and brash ice in a 9.5-km reach of the St. Lawrence River near Ogden Island. The remote sensing and data reduction system developed for the project provided data sufficient for production of a contour map having 1-ft intervals. With this contour map, the accumulation pattern of frazil and brash ice could be analyzed. Recommendations are given for improving the performance of the aerial profiling system.
    Type of Medium: Series available for loan
    Pages: iv, 19 Seiten , Illustrationen
    Series Statement: CRREL Report 77-8
    Language: English
    Note: CONTENTS Page Abstract Preface Conversion factors: U.S. customary to metric (SI) units of measurement Background Objectives Profiling system Approach Profiling method Data reduction and interpretation Results Conclusions Recommendations Literature cited Appendix A. Comparison of ground and aerial data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    Call number: ZSP-201-77/9
    In: CRREL Report, 77-9
    Description / Table of Contents: This report presents experimental results on the conditions of initiation of an ice jam by a simple surface obstruction, on the equilibrium thickness of an ice jam formed by accumulation and submergence of ice floes, and on the compression strength of floating, fragmented ice cover. In the study on ice jam initiation, it was found that the minimum concentration of floes in the opening of the obstruction at which a jam occurs is nearly independent of the ratio of width of constricted passage to channel width, and is proportional to a negative power of the ratio of floe length to width of constricted passage. From energy analysis of floe submergence, a relationship relating the thickness of a jam formed by accumulation and submergence of floes to the approach flow characteristics was derived and found to fit satisfactorily the experimental data. In experiments on compression strength of floating, fragmented ice cover it was found that the compressive strength is inversely proportional to compression velocity and independent of cover length.
    Type of Medium: Series available for loan
    Pages: vii, 45 Seiten , Illustrationen
    Series Statement: CRREL Report 77-9
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Introduction I. Initiation of ice jams by partial surface obstructions A. Introductory remarks B. Experimental apparatus and procedure C. Dimensional analysis D. Presentation of results and discussion ΙΙ. Thickness of ice jams due to accumulation and transport of ice floes A. Introductory remarks B. Experimental apparatus and procedures C. Presentation of results E. Conclusion III. Compressive strength of floating fragmented ice covers A. Introductory remarks B. Experimental setup and procedure C. Presentation of results and discussion D. Conclusions Literature cited Appendix A: Experimental results on ice jam initiation Appendix B: Effect of surface tension on submergence velocity of ice floes Appendix C: Experimental results for ice jam thickness study Appendix D: Experimental results on compressive strength of fragmented ice cover
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/31
    In: CRREL Report, 77-31
    Description / Table of Contents: Ten roofs in Concord, New Hampshire, were surveyed for wet insulation using a hand-held infrared camera. Suspected wet areas were marked on the roof with spray paint and roof samples were obtained to verify wet and dry conditions. Recommendations for maintenance and repair were made based on infrared findings, water contents, and visual examinations. An incremental economic study is presented to serve as a guide in determining the most cost-effective approach.
    Type of Medium: Series available for loan
    Pages: v, 29 Seiten , Illustrationen
    Series Statement: CRREL Report 77-31
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors: US, customary to metric (SI) units of measurement Introduction Infrared camera Core samples State House State House Annex State Library Legislative Office Building Public Health Complex Highway Garage Fish and Game Offlces Supreme Court John O. Morton Building Department of Health and Welfare Laboratory Economics of roof reinsulation Conclusions and recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/16
    In: CRREL Report, 77-16
    Description / Table of Contents: A brief discussion is given of the ways an icebreaker breaks ice. Since the icebreaking process is so complex, the solution of a mathematical model does not appear to be feasible. As an alternative, it is suggested that physical models be used to design icebreakers. The appropriate scaling laws for physical models are developed and their practical limitation discussed.
    Type of Medium: Series available for loan
    Pages: ii, 9 Seiten , Illustrationen
    Series Statement: CRREL Report 77-16
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/17
    In: CRREL Report, 77-17
    Description / Table of Contents: A literature search was made for information on the accretion of ice on ocean structures and on methods for control. The bulk of the reports were in Russian, with some additional Japanese, British, American, Canadian, and Icelandic sources. Analysis of icing reports indicated that sea spray is the most important cause of ship icing, with lesser amounts due to freezing rain, snow, and fog. Icing is a potential danger whenever air temperatures are below the freezing point of water and the sea temperature is 6 C or lower. Theoretical work on the ice accretion process is discussed, and a method is suggested, based on Russian experiments, for calculating the sea spray accumulation rate for cylindrical and flat surfaces as a function of water source temperature, air temperature, and wind speed. Other factors that influence icing severity are ship size and configuration, angle between ship course and water heading, and ship speed. Icing in the north temperate latitudes generally occurs in the rear of barometric depressions. Maps showing limits of various degrees of icing severity are included. Atmospheric icing measurements on tall land-based structures are presented, and potential maximum accumulations estimated. Control measures are discussed, though no completely effective method is available. Mechanical (impaction) methods are the most common, but experiments have been conducted on heated, icephobic, and deformable surfaces, and with freezing point depressants. No device for the unequivocal measurement of ice accumulation is available, though some experimental methods are suitable for controlled testing; it is recommended that a device be developed.
    Type of Medium: Series available for loan
    Pages: v, 42 Seiten , Illustrationen
    Series Statement: CRREL Report 77-17
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric units of measurements Introduction The freezing proeess Icing observations Geographical distribution of icing and contributing meteorological conditions Extreme icing conditions Extremes of icc accumulation Prediction of icing occurrences Prediction of icing intensity and rate Control methods Measurement of icing rate Conclusions and recommendations Literature cited Appendix A. Maps of icing occurrence and rate Appendix B. Data for computing ship icing rates Appendix C. Estimation of ice accumulation
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/30
    In: CRREL Report, 77-30
    Description / Table of Contents: Abstract: Ageneral computer model to simulate municipal snow removal has been developed. Programs which aid in the routing of snowplows are a part of this package. Once vehicle routes are created, the simulation program can be used to assess situations varying both equipment and meteorological parameters. Time for each plow to complete its route is calculated. Considerations are made for the above variable parameters plus plowing windrow, route starting depth, overlapping truck routes and intersection delay time. The effects of storm length, snowfall rate and starting depth on total plowing time are examined in a test case.
    Type of Medium: Series available for loan
    Pages: ii, 7 Seiten , Illustrationen
    Series Statement: CRREL Report 77-30
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/2
    In: CRREL Report, 76-2
    Description / Table of Contents: The repair and maintenance costs of low slope roofs are high and their life expectancy is less than desired. The increasing use of insulation is accompanied by a greater incidence of problems. The experience in cold regions amplifies these experiences. Protected membrane roofs have the prerequisites for better performance and the experience to date is encouraging. The results of performance measurements of three roofs built by the Corps of Engineers verify that the membrane remains at nearly constant temperature, independent of the weather, and that the insulation retains its integrity despite periodic wetting. Moisture absorption is slow and appears to stabilize in time due to the self-drying nature of the roof. Heat losses are increased due to rain, and extra insulation should be added to compensate for these losses. The resistance of protected membrane roofs to fire, traffic, impact, and other adverse forces is superior. So far, the initial cost of protected membrane roofs is at a premium, primarily due to the cost of concrete pavers. The initial cost premium can be justified, however, by the reduced repair and maintenance costs as indicated to date, and by the longer life expectancy of the protected membrane. The high probability of superior performance and cost effectiveness is a compelling reason to incorporate protected membrane roofs increasingly in Government construction.
    Type of Medium: Series available for loan
    Pages: v, 27 Seiten , Illustrationen
    Series Statement: CRREL Report 76-2
    Language: English
    Note: CONTENTS Page Abstract Preface Introduction Low slope roof problems and repair costs Protected membrane roofs and materials Installations of protected membrane roofs Performance evaluation Test program Effectiveness Thermal efficiency Heat balance Internal cooling due to rain Moisture absorption and thermal conductivity of insulations Durability and life expectancy Fire resistance Patent considerations Costs of roofs Design considerations Proposed specifications Conclusions and recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/4
    In: CRREL Report, 76-4
    Description / Table of Contents: Large areas of grounded sea ice have been reported by early arctic explorers and more recently by the U.S. Coast Guard. The ESSA, ERTS, NOAA and DMSP satellites now provide multispectral imagery with sufficiently high resolution to allow detailed sequential observations to be made of the movement and spatial extent of arctic sea ice. This report discusses the location, formation and decay of five large (greater than 30 sq km) islands of grounded sea ice in the southern Chukchi Sea as observed for an extended period of time using satellite imagery. Measurements of the bathymetry around one grounded sea ice feature are presented along with observations made and photos taken from the ice surface. The potential use of these sea ice islands as research stations is also discussed.
    Type of Medium: Series available for loan
    Pages: v, 24 Seiten , Illustrationen
    Series Statement: CRREL Report 76-4
    Language: English
    Note: Contents Introduction The discovery Age of the island Island visit Other islands of grounded ice Discussion Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/7
    In: CRREL Report, 76-7
    Description / Table of Contents: This report covers a series of cantilever beam tests designed to determined the efficacy of adding reinforcement to an ice cover. Tests were run using 1-in.-diam tree branches, 3/16-in.-diam wire rope and 9/16-in. half-round wood dowels as reinforcement for both seawater and freshwater ice. The results show a definite advantage derived from using reinforcement, even when poorly placed. The results also show that reinforced ice carries a load even after it cracks. Thus, after the initial cracks there is time to remove people and equipment before final breakthrough. One must bear in mind, however, that reinforcement has disadvantages. The darker reinforcement absorbs solar radiation and thereby causes earlier weakening of the ice cover. Also, in many cases the time and effort required to place reinforcement may exceed those required to achieve equal strength by additional thickening of the ice sheet. This study has shown that understanding of the failure mechanism of ice under repetitive loading is poor and that future studies should be performed on this problem. Also, this study covered only cantilever beams. The actual field problem is strengthening a three-dimensional sheet. Hence, distribution and orientation of the reinforcement should be addressed in future studies.
    Type of Medium: Series available for loan
    Pages: v, 12 Seiten , Illustrationen
    Series Statement: CRREL Report 76-7
    Language: English
    Note: Contents Abstract Preface Summary Conversion factors: U.S. customary to SI metric units Introduction Typical methods of constructing ice bridges Current knowledge Test program Objectives Equipment Procedure Data General Specific ice sheets Test results Conclusions Recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/10
    In: CRREL Report, 76-10
    Type of Medium: Series available for loan
    Pages: vi, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 76-10
    Language: English
    Note: CONTENTS Introduction Experimental work SCR samples CAG samples CMS samples UAG samples SI samples Optical system Equipment Procedure Photographic work Large cracks and fissures Small damage to the surface Small damage to the buIk Results Damage as a function of the position x of the focal point; n(x) Damage as a function of the number of irradiations #; n(#) Damage as a function of crystallographic orientation ĉ; n (ĉ); p (ĉ) Damage as a function of surface structure Damage as a function of age A; n (A) Damage as a function of wavelength λ; p(λ) Systematic study of damage as a function of W, t, m and s; n(W, t, m, s) Analysis Fracture in ice Mechanisms for optically generated damage in transparent dielectrics Discussion of the results Summary and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/15
    In: CRREL Report, 76-15
    Description / Table of Contents: A literature review of revegetation and biological aspects of restoration research was completed for arctic and sub­arctic North America. Although there is a great deal of climatic variation in this region it is generally characterized by extreme conditions, such as a short growing season and permafrost. Most of the revegetation research has been undertaken in the last six years as a result of increased natural resource development. The primary goal has been erosion control, with aesthetics, minimization of thermokarst, and production of browse as other objectives. Revege­tation and long-term restoration methods depend upon such variables as the site conditions, nutrient regime (especially as this is influenced by the climatic conditions in the Arctic and Subarctic), plant adaptations, and the selection of native or introduced species. Technologies which have been developed to meet these conditions primarily include seedbed preparation, use of seed mixes, and fertilization and seeding methods. Most of the research has focused on the use of agronomic grasses and legumes. These are selected on the basis of a number of factors, such as cold hardiness and growth form prior to evaluation in the laboratory and the field. The most successful species to date have been Arctared fescue and Nugget bluegrass in the Arctic, while these two as well as creeping red fescue, meadow foxtail, Frontier reed canarygrass, Durar hard fescue, slender wheatgrass, and Icelandic poa did well in the Subarctic. Similar methods have been attempted to a more limited extent with evaluation of native herbaceous and woody species which seem promising on the basis of natural succession studies. There are a number of continuing research needs for arctic anc subarctic revegetation. These include fertilization strategies, development of specialized techniques (such as sprigging) for native species, and longer term studies. It is particularly important to integrate short term revegetatio methods with long-term restoration goals.
    Type of Medium: Series available for loan
    Pages: iv, 32 Seiten , Illustrationen
    Series Statement: CRREL Report 76-15
    Language: English
    Note: CONTENTS Page Abstract Preface Introduction Definition of revegetation Definition of restoration Objectives Some revegetation considerations Site conditions Nutrient regime Plant adaptations Native species vs introduced species Methods Seedbed preparation Seeding methods Timing of seeding Seed mixes Fertilization Agronomic grasses and legumes Selection criteria Laboratory evaluation Field evaluation Effect of revegetation methods Site conditions Maintenance of herbaceous cover Introduced woody species Native species — succession Significance of disturbance Primary succession Secondary succession Herbaceous native species Selection Laboratory evaluation Field evaluation Effect of revegetation methods Woody native species Selection Laboratory evaluation Field evaluation Native species and agronomic species, in combination Recommendations for research Summary Bibliography Appendix: Species tested
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/21
    In: CRREL Report, 76-21
    Description / Table of Contents: The effects of snow temperature and initial density on the stress vs density and stress vs deformation relationships were investigated for shallow compacted snow in the density range of 0.28 to 0.76 g/cu m, for stress range of 0.5 to 72 bars and a temperature range of -1 to -34 C at a deformation rate of 40 cm/s. A decrease in temperature increases the resistance to stress, the effect increasing with applied stress. For any stress, an increase in the initial density results in an increase in the resulting density, the effect decreasing with an increase in stress. The approximate yield envelopes, which define the stress required to initiate any deformation of snow of a particular density and temperature, were determined. Rapid compaction of snow results in extensive recrystallization, significantly different from that of naturally compacted snow. At a stress of 72 bars, transformation to ice occurs only at temperature above -10C.
    Type of Medium: Series available for loan
    Pages: vi, 47 Seiten , Illustrationen
    Series Statement: CRREL Report 76-21
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Description of study Sample preparation Test equipment and procedure Discussion of results Stress-density relationship Stress-deformation relationship Summary and conclusions Microstructural examination of artifically compacted snow Analytical techniques Results and discussion Conclusions Literature cited Appendix: Photographs of oscilloscope traces
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/21
    In: CRREL Report, 77-21
    Description / Table of Contents: Cold weather limits the successful application of built-up roofing, but often a roof installation must be completed late in the fall or in the winter. The loose-laid protected membrane roof with a synthetic sheet membrane can be installed in the middle of the winter with complete reliability. A synthetic membrane is traditionally more expensive than built-up roofing (rising crude oil prices, however, have reversed this condition), but it has two special features besides its suitability for winter installation: it can be placed on a damp deck, if necessary, and, being losse-laid, it does not split because of deck movement. This report documents information on the installation of two roofs in Anchorage, Alaska, during January and February 1972, including a discussion of the necessary snow removal from the bare deck and the use of portable shelters for preparing the lap joints between sheets during very cold weather. The winter installation caused no special construction problems and the advantages of the synthetic membrane make it an attractive alternative to built-up roofing. The cost of loose-laid protected membrane roofs in Alaska was, in 1972, nearly $300 per square ($28/sq.m), including insulation. Prices are rising as labor costs rise and as more insulation is specified.
    Type of Medium: Series available for loan
    Pages: 5 Seiten , Illustrationen
    Series Statement: CRREL Report 77-21
    Language: English
    Note: CONTENTS Abstract Preface Introduction The protected membrane roof Winter construction considerations Construction costs Conclusion
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/28
    In: CRREL Report, 77-28
    Description / Table of Contents: Tests were conducted to assess the extent of surface degradation resulting from the application of non-chloride deicing chemicals on three types of airfield pavements. The chemicals tested were proprietary mixtures of urea, formamide, and ethylene glycol; sodium chloride, distilled water, and dry specimens were used as controls and for comparison. Pavements included new and old specimens of open-graded asphaltic concrete and old specimens of dense-graded asphaltic concrete. Portland cement concrete specimens used were new and old, with and without air-entrainment. New and old tar rubber concrete specimens were also tested. Samples were subjected to up to 60 freeze-thaw cycles with deicing chemicals flooding their upper surface. Each specimen was rated on a scale of 0-5 after every five freeze-thaw cycles. All PCC specimens showed some surface degradation, whereas the dense- and open-graded asphaltic concretes were largely unaffected.
    Type of Medium: Series available for loan
    Pages: v, 16 Seiten , Illustrationen
    Series Statement: CRREL Report 77-28
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric (SI) Units of measurement Introduction Test procedure Pavement types Deicing chemicals Description of tests Discussion Literature cited Appendix A: Test results Appendix B: Portland cement concrete materials data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/14
    In: CRREL Report, 76-14
    Description / Table of Contents: At the height of warm weather in Alaska in 1975, temperature measurements were made to determine the extent of the thermal impact on French Creek due to a condenser cooling water impact from the Eielson AFB Power plant. Water temperature measurements during a two-day period failed to show any significant thermal impact on the water in French Creek. It was concluded that no thermal pollution exists due to this warm water input at the volumes and conditions that presently exist.
    Type of Medium: Series available for loan
    Pages: ii, 5 Seiten , Illustrationen
    Series Statement: CRREL Report 76-14
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/22
    In: CRREL Report, 76-22
    Description / Table of Contents: Several membrane materials used or considered for MESL (membrane-enveloped soil layer) utilization of poor soils in road construction have been tested for cold effect on puncture and stiffness. PE (polyethylene) film was also tested for solvent soak effects. A simple blunt needle apparatus was devised for puncture testing. For plastic films (mainly PE), both puncture resistance and stiffness increase at low temperature (0 F, -18 C). For non-woven, spunbonded fabrics these properties are little affected by cold. For both non-wovens and PE film, puncture and bending strengths increase linearly with weight or thickness. The slope is steeper for the non-wovens, which generally are stronger on a per unit weight basis. PE film soaked in a hydrocarbon solvent swelled approximately 17% and lost about 30-40% its puncture strength. These effects are apparently reversible upon drying. Consideration has been given to sealing and patching requirements and to the drying of sealant liquids when adhering film to film. Also considered have been pos­sible slippage related to the reported low angle of friction of plastic films in soil and the possibility of lamination for improved membrane properties.
    Type of Medium: Series available for loan
    Pages: v, 60 Seiten , Illustrationen
    Series Statement: CRREL Report 76-22
    Language: English
    Note: CONTENTS Page Abstract Preface Introduction Experimental Materials Apparatus Procedure Results Discussion PE solvent soak and swelling PE solvent soak and puncture Film puncture rate effect Bending orientation Comparative tables and graphs Puncture and temperature Bending and temperature Test result vs thickness and weight General considerations Conclusion and recommendations Literature cited Appendix Detailed data tables Denier explanation
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/5
    In: CRREL Report, 76-5
    Description / Table of Contents: Griffith, and later Babel, have previously developed a tensile fracture criterion for a two-dimensional state of stress. This theory is extended to the compression-compression region. From this theory the angle of fracture is developed. The theory is extended conceptually to three dimensions. Triaxial test data by Haynes for snow-ice are shown in this three-dimensional fracture theory. The test data are slightly less than those predicted when the void in the snow-ice is spherical.
    Type of Medium: Series available for loan
    Pages: iii, 9 Seiten , Illustrationen
    Series Statement: CRREL Report 76-5
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/11
    In: CRREL Report, 76-11
    Description / Table of Contents: Water flow through the unsaturated portion of a snowpack is calculated using various assumptions about radiation penetration into the snow. The results show that for the purposes of hydrologic forecasting, it is sufficiently ac­curate to assume that all of the radiation absorption occurs at the surface. The error in the calculation of flow is largest for very shallow snowpacks, but this error is reduced by radiation absorption at the base of the snow and by the routing of meltwater through the saturated basal layer.
    Type of Medium: Series available for loan
    Pages: v, 9 Seiten , Illustrationen
    Series Statement: CRREL Report 76-11
    Language: English
    Note: CONTENTS Abstract Preface Summary Conversion factors for U.S. customary and SI units Introduction Theory Examples Discussion Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Call number: ZSP-201-76/18
    In: CRREL Report, 76-18
    Description / Table of Contents: Three surface elevation and ice thickness profiles obtained during the 1972 Arctic Ice Dynamics Joint Experiment on a multiyear ice floe were analyzed to obtain relationships between surface elevation, thickness and physical properties of the ice. It was found that for ice freeboards from 0.10 m to 1.05 m above sea level a linear relationship between ice density and freeboard could be postulated. The equation for the regression line is: Ice density = -194f' + 974 kg/cu m where f' is the ice freeboard plus snow depth in ice equivalent at the point in question. This statistical relationship is consistent with observed physical properties, which indicate that as the ice freeboard increases, ice salinity decreases and the higher freeboard or thicker ice therefore decreases in density. Using this variable density with freeboard relationship, a model was constructed to predict ice thickness, given ice freeboard and snow depth alone. This prediction is desirable, since snow depth and freeboard are relatively easy to obtain, whereas ice thickness can usually be obtained only by drilling through the ice. The model was compared with two other models. It was found that the variable density prediction model gave the best approximation to observed ice thickness, with a standard error between the measured and predicted value of about 0.4 m, compared with errors from 50 to 100% higher for the other two models.
    Type of Medium: Series available for loan
    Pages: v, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 76-18
    Language: English
    Note: Contents Abstract Preface Summary Introduction Previous work Results Models for predicting thickness from ice freeboard Comparison between measured and predicted thicknesses Spectral behavior of measured and predicted profiles Comparisons of ice thickness using airborne laser profilometry Conclusions Literature cited Appendix A: Misgivings on isostatic imbalance as a mechanism for sea ice cracking
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/32
    In: CRREL Report, 77-32
    Description / Table of Contents: An experimental study of forced convective heat transfer over a vertical melting plate has been conducted. This study covers water velocities ranging from 1.7 to 9.8 mm/s and bulk water temperatures from 1.11 to 7.50 C. The experimental results are correlated in terms of Nusselt, Prandtl and Reynolds numbers with a moderate correlation coefficient of 0.843. The results are expected to be useful in predicting the heat transfer characteristics of a much larger prototype ice-water heat sink.
    Type of Medium: Series available for loan
    Pages: v, 12 Seiten , Illustrationen
    Series Statement: CRREL Report 77-32
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Summary Introduction Problem General review of the subject Experimental apparatus General considerations Water reservoir Test chamber assembly Pumping system Electrical control system Experimental procedure Experimental results Discussion and comparison of results Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/27
    In: CRREL Report, 77-27
    Description / Table of Contents: The spectral reflectance of natural snow in the range of 0.20- to about 0.40-micrometers wavelengths was studied in the laboratory using both continuous spectral scanning and fixed bandpass measurements. White barium sulfate pressed powder was used as a standard for comparison. The reflectance of fresh snow was found to be very high (usually nearly 100%) and only weakly wavelength dependent from 0.24 micrometers to the visible range. In the 0.20- to 0.24-micrometers portion of the spectrum, the reflectance was found to be quite erratic. Possible reasons for the irregularities in reflectance measurements are discussed.
    Type of Medium: Series available for loan
    Pages: v, 19 Seiten , Illustrationen
    Series Statement: CRREL Report 77-27
    Language: English
    Note: CONTENTS Abstract Preface Introduction Experimental procedure Snow collection Spectrophotometric methods Data analysis Potential sources of error Presentation of results Continuous-scan measurements Comparison of sequential bandpass and continuous-scan measurements Theoretical calculations Discussion of results Differences in amplitude of reflectance measurements Irregularities in the shape of spectral reflectance curves The true spectral reflectance of snow in the ultraviolet region Conclusions Literature cited Appendix A. Absolute reflectance values of pressed BaSO4 powder
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/19
    In: CRREL Report, 77-19
    In: Mechanics of cutting and boring, Part VI
    Description / Table of Contents: Abstract: The report deals with forces and power levels in cutting machines having adisc or drum that rotates about an axis perpendicular to the direction of advance. The forces on individual cutting tools are related to position on the rotor and to characteristics such as tool layout, rotor speed, rotor size, machine advance speed, and rotor torque. Integration leads to expressions for force components acting on the rotor axis, taking into account tool characteristics, cutting depth of the rotor, and rotor torque. These provide estimates of tractive thrust and thrust normal to the primary free surface. For self-propelled machines, this leads to considerations of traction, normal reaction, weight and balance, and power/weight ratios. Specific energy consumption is analyzed and related to machine characteristics and strength ofthe material being cut. Power per unit working area is discussed, and data for existing machines are summarized. Power requirements for ejection ofcuttings are analyzed, and the hydrodynamic resistance on underwater cuttings is treated. A number of worked examples are given to illustrate the principles discussed in the report.
    Type of Medium: Series available for loan
    Pages: vii, 36 Seiten , Illustrationen
    Series Statement: CRREL Report 77-19
    Language: English
    Note: CONTENTS Abstract Preface Foreword Introduction Terminology Forces on individual cutters Torque force and tool force Forces on the rotor axis Tractive thrust and down thrust Alternative tool force formulations Vehicle traction Power/weight ratio Weight and balance Force, torque, speed and power Specific energy Efficiency and performance index Power density Power requirements for ejection of cuttings Hydrodynamic resistance in underwater cutting
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/18
    In: CRREL Report, 77-18
    Description / Table of Contents: Abstract: Models originally developed to describe the arching and the movement of granular materials through hoppers or chutes are applied to the arching and drift of pack ice in straits and gulfs having lengths of 50 to 500 km. Verification of the usefulness of the models is attempted by making comparisons with ice deformation patterns as observed via satellite imagery in the Bering Strait region and in Amundsen Gulf. The results are encouraging in that there is good correspondence between observed arching and lead patterns and those predicted by theory. In addition, values determined via the model for the angle of internal friction (≈ 30° to 35°) and the cohesive strength per unit thickness (≈ 2000 N/m) are similar to values obtained by other approaches. It is estimated that if the wind velocity parallel to the Bering Strait exceeds ≈ 6 m/s, there will be ice flow through the strait.
    Type of Medium: Series available for loan
    Pages: iii, 11 Seiten , Illustrationen
    Series Statement: CRREL Report 77-18
    Language: English
    Note: CONTENTS Abstract Preface Introduction Theory Limiting span of an arch Flow of pack ice through converging channels Stoppage of flow Applications St. Lawrence Amundsen Gulf Bering Strait Conclusion References
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/7
    In: CRREL Report, 77-7
    In: Mechanics of cutting and boring, IV
    Description / Table of Contents: The report deals with the cutting of rock and similar materials by parallel motion tools. It examines cutting forces and energy requirements, taking into consideration tool geometry, wear, operating conditions, and material properties. After an introductory discussion of terminology, some general principles are outlined, and relevant theoretical ideas on metal cutting and rock cutting are reviewed. The next section, which is the heart of the report, reviews experimental data on the magnitudes and directions of cutting forces. There is a graphical compilation of data, including some from obscure or unpublished sources. The variables covered include chipping depth, rake angle, relief angle, side rake, base angle, tool width, tool compliance, tool speed, tool wear, tool interactions, and material properties. The second major part of the report treats the energetics of cutting. It begins with a short discussion of relevant principles, and continues with a compilation and review of experimental data, covering the same independent variables as the force section. The report ends with a concise summary of general behavior for parallel motion tools.
    Type of Medium: Series available for loan
    Pages: xi, 85 Seiten , Illustrationen
    Series Statement: CRREL Report 77-7
    Language: English
    Note: CONTENTS Abstract Preface Foreword Introduction Terminology Principles of cutting Forces acting on a single cutter Theoretical Ideas on cutting Experimental data on cutting forces Effect of chipping depth on tool forces Effect of rake angle on tool forces Effect of relief angle on cutting forces Effect of side rake on tool forces Effect of base angle or face profile on tool forces Effect of rounding at the cutting edge Effect of tool width on cutting forces Tool compliance and force fluctuations Effect of tool speed on cutting forces Effect of rock properties on cutting forces Tool interaction and kerf spacing Effect of multiple pass cutting on tool forces Effect of tool wear on cutting forces Development of wear Energetics of cutting Energetics of parallel-motion tools Variation of specific energy with chipping depth for a single tool Effect of rake angle on specific energy Effect of relief angle on specific energy Effect of side rake on specific energy Effect of base angle or face profile on specific energy Effect of tip radius on specific energy Effect of tool width on specific energy Effect of tool speed on specific energy Variation of specific energy with rock properties Effect of kerf spacing on specific energy Effect of multiple pass cutting on specific energy Effect of tool wear on specific energy General summary Literature cited Appendix Α. Additional data for ice Appendix Β. Conversion factors: U.S. customary and metric units of measurement
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/1
    In: CRREL Report, 76-1
    Description / Table of Contents: This report summarizes the advances in understanding of the Arctic which have come about since the inception of the ARPA Arctic Surface Effect Vehicle Program in 1970, primarily as the result of CRREL’s participation. Major efforts to increase knowledge of sea ice, terrestrial, and coastal topographic features are described. Special empha­sis is placed upon the quantitative understanding of pressure ridging. Other areas of major interest are atmospheric characteristics and ecological effects. A list of publications generated is included.
    Type of Medium: Series available for loan
    Pages: iv, 28 Seiten , Illustrationen
    Series Statement: CRREL Report 76-1
    Language: English
    Note: CONTENTS Abstract Preface Introduction Sea ice characteristics Ridging intensity Arctic terrain characteristics databank Digital terrain maps Digital laser profiles Standard terrain tapes Mobility analysis Terrestrial and coastal characteristics Northern Alaska Interior Alaska Arctic USSR Northern Canada and Greenland Climatological characteristics General features Surface winds Temperatures Precipitation and visibility Electromagnetic/optical propagation Ecological effects of SEV operations SK-5 tests Simulated SEV tests Conclusions Literature cited Additional CRREL SEV Bibliography
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/3
    In: CRREL Report, 76-3
    Description / Table of Contents: A world-wide review of the literature applicable to the design of harbors and channels in cold regions was conducted. Forces due to ice movement present the dominant factor in the design of marine structures in cold regions. Expressions for calculating the ice force are presented. Other factors relating to design criteria such as construction materials, structure geometry, and methods of ice suppression are discussed.
    Type of Medium: Series available for loan
    Pages: iii, 32 Seiten
    Series Statement: CRREL Report 76-3
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/6
    In: CRREL Report, 76-6
    Description / Table of Contents: Water flow through the vein structure of temperate ice is described as Darbian flow in which the pressure gradient is determined from vein size and overburden pressure. A solution method for the resulting equation is given and two special cases are considered. For steady flow the equilibrium vein size is a function of depth and, by neglecting the effects of diffusion, it is shown that flow perturbations introduced at the surface propagate downward at a constant speed.These perturbations propagate so slowly that even annual surface fluctuations of flow may be eliminated by diffusion before reaching the bottom of the glacie
    Type of Medium: Series available for loan
    Pages: iii, 5 Seiten , Illustrationen
    Series Statement: CRREL Report 76-6
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/9
    In: CRREL Report, 76-9
    Description / Table of Contents: Access to study areas may be an important factor in long-term field-oriented research, particularly in-regions without well-developed road and communications systems. In a wildland hydrometeorology research project in subarctic Alaska, access to and within a 40-square-mile research watershed has been developed both in accordance with a general plan prepared at project inception and in response to developing research requirements. Foot trails, trails for 'off-road' low-ground-pressure tracked vehicles, helicopter transport, long-term data recorders, and radio telemetry of data have all been incorporated in an access and communications system. Cost estimates indicate that incorporation of gravel roads into the system would be economically advantageous, given adequate funding for initial road construction.
    Type of Medium: Series available for loan
    Pages: iv, 9 Seiten , Illustrationen
    Series Statement: CRREL Report 76-9
    Language: English
    Note: Contents Abstract Preface Conversion factors for U.S. customary and SI units Introduction Access within the Caribou-Poker Creeks Research Watershed Trail access Helicopter access Road access Alternative approaches Long-term recorders Telemetry systems Remote sensing Relative costs A desirable system Selected bibliography
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/16
    In: CRREL Report, 76-16
    In: Mechanics of cutting and boring, (DE-B103)20210225152525
    Description / Table of Contents: This report, which is one of a series on the mechanics of cutting and boring in rock, deals with the kinematics of machines such as rotary drills, augers, tunnel boring machines, corers, and raise borers, in which the rotary cutting unit revolves about an axis that is parallel to the machine's direction of advance. The discussion and analysis cover the geometry and motion of various components of the cutting systems, including such topics as tool trajectories, tool speeds, motions of the more complicated mechanisms, chipping depth, penetration rates, production and clearance of cuttings, tool angles, and spatial distribution of cutters. Worked examples are given to illustrate the application of various equations to practical problems.
    Type of Medium: Series available for loan
    Pages: ix, 45 Seiten , Illustrationen
    Series Statement: CRREL Report 76-16
    Language: English
    Note: CONTENTS Abstract Preface Summary Foreword Terminology Trajectories of fixed tools Trajectories of roller cutters and indenters Speed of fixed cutting tools Speed of rolling disc cutters Speed and geometry of "wide" roller cutters Skidding rollers "Spiked" rollers Epicyclic or planetary mechanisms Chipping depth and penetration rate Chip production and cutting removal rate Balancing cutting and clearing rates in flight augers Tool relief angles - kinematic considerations Tool rake angles Distribution and spacing of cutting tools Radial tool spacing Angular tool spacing Spacing in the axial direction Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/20
    In: CRREL Report, 76-20
    Description / Table of Contents: Under ordinary conditions the freezing of water begins with supercooling and ice nucleation, and proceeds at 0°C at the ice/water interface until ice formation stops. The presence of solutes, high pressure, or dispersal in fine pores causes the water to freeze at temperatures below 0°C (the so-called freezing point depression). Whenever freezing begins, it pro­ceeds at a constant temperature, or at a temperature which becomes progressively lower. A temperature rise during ice formation is considered here to be an anomaly. Under all equal circumstances, the conditions under which an anomal­ous freezing temperature is observable appear to be very special. This report describes two different experiments dis­playing the anomalous rise of temperature after nucleation and during ice formation. In one case the water was dispersed in the fine pores of fine powders; in the other case pure water was frozen in a transparent insulated cell. Photographic observations were made; relations of ice surface to water volume were measured.
    Type of Medium: Series available for loan
    Pages: iv, 23 Seiten , Illustrationen
    Series Statement: CRREL Report 76-20
    Language: English
    Note: CONTENTS Page Abstract Preface Conversion factors for U.S.customary and SI units Introduction Materials, instruments, measurements Experiments with water freezing in fine pores Freezing experiments with bulk water Summary and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/12
    In: CRREL Report, 76-12
    Description / Table of Contents: The heat transfer processes associated with melting and refreezing a drill hole 500 m in depth and 0.150 m in initial radius through an ice shelf were approximately analyzed. The results were expressed in graphical form showing the time available for experimentation under the hole as a function of heating duration and heating strength. It was found that the refreezing of the drill hole had a much slower rate than the melting of the hole.
    Type of Medium: Series available for loan
    Pages: vi, 15 Seiten , Illustrationen
    Series Statement: CRREL Report 76-12
    Language: English
    Note: Contents Abstract Preface Summary Nomenclature Introduction Analysis Melting period Freezing period Calculation Conclusion Literature cited Appendix A: Justification of using eq 8 for the calculation of heat transfer coefficient h
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/13
    In: CRREL Report, 76-13
    Description / Table of Contents: The thermal structure and ice conditions of Lake Champlain, a mid-latitude large lake, near Shelburne Point, Vermont, were studied during the winter of 1974-75. The lake was instrumented to a depth of 8.5 m with a string of highly calibrated thermistors, connected to a data logger on shore which recorded water temperatures every four hours. An ice mooring system was developed to anchor the thermistor string so that ice and water temperatures could be obtained at known levels. This temperature recording system measured vertical and horizontal variations in ice and water temperature regimes during ice formation, growth and decay. Meteorological data were measured during the winter period November 1974 through March 1975 at the site. Ice stratigraphy was determined for the ice at the site at its maximum seasonal growth for comparison with ice from St. Albans Bay (at the northern end of Lake Champlain) which had formed earlier. Correlations were determined between ice growth and accumulated degree days of freezing. The operation of a bubbler system installed near the measurement site around a service dock was observed.
    Type of Medium: Series available for loan
    Pages: vii, 22 Seiten , Illustrationen
    Series Statement: CRREL Report 76-13
    Language: English
    Note: CONTENTS Abstract Preface Summary Introduction Climate Site selection Instrumentation, measurements and calibration Installation of automatic water temperature recording system Visual observations and ice structure St. Albans Shelburne Analysis Temperature comparison Water temperature measuring system Changes in water temperature Wind Degree-days of freezing Prediction of ice formation Bubbler system Conclusions Recommendations Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/17
    In: CRREL Report, 76-17
    In: Mechanics of cutting and boring, (DE-B103)20210225152525
    Description / Table of Contents: This report, which is one of a series on the mechanics of cutting and boring in rock, deals with the kinematics of machines which utilize a continuous belt as the cutting unit (e.g. coal saws, shale saws, digger-chain trenchers). The discussion and analysis cover the geometry and motion of various components of the cutting system, including such topics as chipping depth, production and conveyance of cuttings, tool trajectories, tool speeds, tool angles, and arrangement of cutting tools on the belt. Worked examples are included to illustrate the application of various equations to practical problems
    Type of Medium: Series available for loan
    Pages: viii, 24 Seiten , Illustrationen
    Series Statement: CRREL Report 76-17
    Language: English
    Note: Contents Abstract Preface Summary Foreword Introduction Terminology Chipping depth Production and conveyance of cuttings Tool trajectories Tool speeds Tool relief angles — kinematic considerations Tool rake angles Belt curvature, slackness and flexibility Tool layout Longitudinal tool spacing Transverse tool spacing Cross-section profiles of the kerf Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/12
    In: CRREL Report, 77-12
    Description / Table of Contents: A computer program to calculate the increased live load on a snow-covered roof due to rain-on-snow is given. For the 25-year rainstorm falling on a heavy snow load on a flat roof in Hanover, New Hamsphire, and additional 98 kg/m2 (20 lb/ft2) of liquid water is added to the live load. The additional load due to rain-on-snow is very sensitive to the snow properties and characteristics of the roof. A wide range of live loads is possible, depending on the particular circumstances.
    Type of Medium: Series available for loan
    Pages: vii, 19 Seiten , Illustrationen
    Series Statement: CRREL Report 77-12
    Language: English
    Note: CONTENTS Page Abstract Preface Summary Nomenclature Introduction Water movement through snow Vertical percolation Lateral flow Flat roofs Sloping roofs Rainfall intensity-duration effects Miscellaneous effects Radial flow to drains Flow along gutters on snow-covered roofs Snow structure Basal layer Conclusion Literature citied Appendix A. Computer program calculating roof loads from rain-on-snow
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/14
    In: CRREL Report, 77-14
    Description / Table of Contents: The breakup of the Chena River was observed and documented during the spring of 1975 and 1976. This study attempted to determine the potential for damage to the proposed Chena River flood control dam from ice and debris during breakup. Results of this study were compared to those of a 1974 companion study. In 1975, ice thickness were determined to be 15% thinner than in 1974 and ice volume was 33% smaller. No major ice floes were observed in 1975 and no significant flooding occurred, although the approaches to a bridge at the damsite were eroded by debris and high water immediately after breakup. The 1976 breakup was milder than that of 1975. Minor flooding in the lower river was caused by jamming of a few large ice pieces, but no property damage resulted.
    Type of Medium: Series available for loan
    Pages: v, 44 Seiten , Illustrationen
    Series Statement: CRREL Report 77-14
    Language: English
    Note: CONTENTS Abstract Preface Summary Introduction Ice thickness and quantity Chronology of the 1975 Chena River breakup Checkpoint 3 Checkpoint 4 Checkpoint 5 Checkpoint 6 Checkpoint A Checkpoint 7 Checkpoint C Checkpoint D Checkpoint 8 Checkpoint 10 Checkpoint 11 Checkpoint 12 Spring flooding and debris The 1976 Chena River breakup Breakup in other years Summary and conclusions Appendix A. Sequential photographs of 1975 breakup at checkpoints 3-12
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/15
    In: CRREL Report, 77-15
    Description / Table of Contents: A laboratory experimental study was conducted on a scale model of an annular flow ice-water heat sink to be used to store the waste heat produced in a hardened defense installation operating in an isolated mode. The study ex­amined: 1) scaling relationships for predicting the performance of prototype units using data from scale models, 2) the accuracy of a computer prediction technique developed during an earlier study, 3) the heat transfer phenom­enon at the ice-water interface, and 4) some practical aspects related to the operation of a prototype installation. The scaling relationships and the computer program were found to be sufficiently accurate for use in developing a proto­type sink design. During operation the scale model sink provided an almost constant low temperature source of coolant water for approximately one-half its useful life and thereafter behaved like an ordinary stored water reservoir type heat sink. No significant operational problems were discovered.
    Type of Medium: Series available for loan
    Pages: vii, 54 Seiten , Illustrationen
    Series Statement: CRREL Report 77-15
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Conversion factors: U.S. customary to metric units of measurement Introduction Description of experiment Apparatus Test procedure Experimental results Summary of experimental tests Influence of coolant water flow rates Approximation of the rate of melting Comparison of experimental and computed results Comparative analysis of the model sinks Approximation of the heat transfer coefficient Conclusions and recommendations Literature cited Appendix A. Experimental data, heat sink Model II Appendix B. Heat sink scaling and similarity relationships Appendix C. Derivation of the relationships for the heat transfer coefficient, Reynolds and Nusselt numbers Appendix D. Determination of freezing rates and refrigeration loads Appendix E. Approximation of stresses in the heat sink tank
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/11
    In: CRREL Report, 77-11
    Description / Table of Contents: Two performance indicators, effectiveness and thermal efficiency, are defined and used to evaluate the year-round performance of three protected membrane roofs in Alaska and New Hampshire. Effectiveness is a measure of the deviations of ceiling temperatures from a yearly average, with large diviations indicating erratic performance in the roofing-insulation system and small departures indicating a thermally stable system. Thermal efficiency, the ratio of calculated heat loss to measured heat loss, is affected by climatic conditions such as rain, snow, solar radiation and wind. Thermal efficiency values of 100% or greater are possible since the calculated heat loss is based only on the inside and outside air temperature differences and the thermal properties of the roof components. Results of the year-round evaluation indicate that the three protected membrane roofs generally have high values of both effectiveness and thermal efficiency.
    Type of Medium: Series available for loan
    Pages: v, 40 Seiten , Illustrationen
    Series Statement: CRREL Report 77-11
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors: U.S.customary to metric (SI) units of measurement Introduction Location of test sites Fairbanks Anchorage Hanover, N.H. Test program Instrumentation Effectiveness Therma lefficiency Heat balance within the roof Comparisons with conventional systems Conclusions Effectiveness of the test roof Thermal efficiency Heat balance within the roof Applicability Recommendations Literature cited Appendix A. Temperature and heat flow measurements, Anchorage and Fairbanks, Alaska, and Hanover, New Hampshire Appendix B. Thermal efficiencies of the test roof, Anchorage and Fairbanks, Alaska, and Hanover, New Hampshire Appendix C. January 1973 and August 1972 comparisons of protected membrane and conventional built-up membrane systems at Hanover, New Hampshire
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/10
    In: CRREL Report, 77-10
    Description / Table of Contents: Abstract: The amount of force that an ice sheet can apply to a vertical pile was tested by lowering a hydraulic ram device into a hole cut in an existing ice sheet. The device had a large base and shoved a relatively narrow vertical pile in a horizontal direction. Test variables were: pile widths - 1.5 in. to 36.7 in.; pile shapes - flat, round, 45 ° and 90° wedges; ice thickness - 2.6 in. to 8.8 in.; and ram speed - 0.07 in./sec to 18.75 in./sec; but not all shapes and sizes were tested at all speeds. Air temperature was 20 ° F (-6.7 ° C). Forces and displacements were measured electronically. The findings are presented as a table of test results and as bar graphs of the resultant ice pressures versus the pile width-to-ice-thickness ratio, pile width and shape combination and pile velocity. The types of failures in the ice sheet were classified as crushing, splitting, buckling, bending, and creeping. The ice sheet generally withstood a high initial load followed by several lower peak load levels. The maximum ice pressure measured was 610 psi for a 12.6-in.-diam round pile in 8.4-in.-thick ice.
    Type of Medium: Series available for loan
    Pages: iv, 9 Seiten , Illustrationen
    Series Statement: CRREL Report 77-10
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/29
    In: CRREL Report, 77-29
    Description / Table of Contents: Results of measurements of salinity, grain size, substructure dimensions and crystal fabrics of the undeformed 2.15-m-thick annual sea ice sheet near Narwhal Island, Alaska, are presented. A notable observation was the formation of a dominant c-axis horizontal structure in all ice below 14 cm, including transformation to a pronounced east-west alignment of the c-axes by a depth of 66 cm. This study confirms earlier reports of the occurrence of very strong horizontal c-axis alignments in arctic fast ice.
    Type of Medium: Series available for loan
    Pages: iii, 8 Seiten , Illustrationen
    Series Statement: CRREL Report 77-29
    Language: English
    Note: CONTENTS Abstract Preface Introduction Sampling and analytical procedures Results Discussion Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-77/26
    In: CRREL Report, 77-26
    Description / Table of Contents: A theory for ice forces acting on inclined wedges has been developed, thus making it possible to predict the magnitude of the intermittent ice forces from knowledge of the physical parameters of the system. The theory has been verified by model tests with artificial and natural ice.
    Type of Medium: Series available for loan
    Pages: viii, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 77-26
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Summary Introduction Recent ice research in Denmark General Structures with vertical faces Wedges with inclined faces Recording of the strength of natural ice Artificial ice — properties and manufacture General Composition of material Order of mixing ingredients Rupture theory Theoretical approach Initial contact Forces acting on wedge Maximum force and actual force Principal stress equations 8Dynamic equations Intermittent nature of force Theoretical curve Verifiction of theory by model tests Description Width of rupture channel Plotting of results Engineering application Comparison with Korahavin’s results Recommendations for future research References Appendix A
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Call number: ZSP-201-76/8
    In: CRREL Report, 76-8
    Description / Table of Contents: During the past decade a number of methods for measuring the amount of unfrozen water in partially frozen ground have emerged. Means of quickly and simply predicting unfrozen water contents in clay have become increasingly important with the growth of interest in encapsulating clay soils compacted at low water contents to serve as base courses for roads. Unfortunately the measurements require sophisticated equipment and, in most instances, specially trained operators. In an effort to simplify the task of obtaining water-ice phase composition data, methods of calculating phase composition curves from other, simpler measurements on soils have been sought. The paper presents a method of deriving the measurement of unfrozen water contents at various temperatures from liquid limit determinations.
    Type of Medium: Series available for loan
    Pages: iv, 9 Seiten , Illustrationen
    Series Statement: CRREL Report 76-8
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/23
    In: CRREL Report, 76-23
    Description / Table of Contents: This report describes the study of piles tested in polar snow at Camp Century, Greenland. More than 20 piles of various lengths and sizes were driven, including timber, closed-end and open-end steel pipe piles, and I- and H-piles. The H-piles were instrumented with strain gages. In addition to the driven piles, two purely end-bearing piles were installed in augered holes and five piles were frozen in place using a snow-water slurry. Driving records were obtained and are discussed. Analysis of the driving response of various piles revealed that the Hiley formula, and presumably other similar pile driving formulas, cannot be used to predict the ultimate supporting capacity of piles driven in snow. Factors such as pile inertia, rigidity, size, and tip resistance are discussed in relation to their apparent influence upon pile penetration. Pile load test procedures are described and test results are discussed. It was found that closed-end pipe piles are decidedly inferior to open-end pipe piles in their load-carrying capability and their ultimate supporting capacity. Although pile settlement was found to be dependent upon such variables as pipe load, time, pile shape, and snow temperature, precise effects of these variables were not determined. Nevertheless, the capability of open-end piles to carry quite heavy loads was demonstrated and a procedure is presented for testing these piles in snow.
    Type of Medium: Series available for loan
    Pages: ix, 132 Seiten , Illustrationen
    Series Statement: CRREL Report 76-23
    Language: English
    Note: Contents Abstract Preface Introduction Test site Pile driving equipment Test instrumentation Testing procedures Pile driving data Pile type vs driving resistance Closed-end vs open-end piles Calculated bearing capacity of pile Effect of pile driving on the embedment medium Pile inclination Slurried-in-place piles Pile load test data Strain gage instrumentation and results Pile excavation Discussion and conclusions Literature cited Appendix A: Theoretical elastic deflection of piles supported by skin friction Appendix B: Trench floor arching study
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Call number: Q 2435/37 ; ZSP-319/C-37 ; MOP Per 581(3/37)
    In: Geodätische und Geophysikalische Veröffentlichungen : Reihe 3, Physik der festen Erde, Heft 37
    Type of Medium: Monograph available for loan
    Pages: 191 Seiten , Illustrationen, Karten , 1 Karte
    ISSN: 0435-6187
    Series Statement: Geodätische und Geophysikalische Veröffentlichungen : Reihe 3, Physik der festen Erde 37
    Language: German , English , Russian
    Note: Kartenbeilage unter dem Titel: Berge der Deutsch-Sowjetischen Freundschaft : Antarktika Enderby-Land = Gory Nemecko-Sovetskoj Družby : Antarktika Zemlja Ėnderbi 〈1 : 10 000〉 , Inhaltsverzeichnis Vorwort Rezjume Abstract Teil I: Allgemeiner Teil 1. Arbeitsprogramm und Arbeitsgebiet (S. MEIER) 1.1. Arbeitsprogramm 1.2. Meßmethoden 1.3. Hauptarbeitsgebiet Hays-Gletscher 1.4. Lokale Eiskappe von Molodežnaja 1.5. Vergleichsobjekt Campbell-Gletscher 2. Expeditionsverlauf (K. DRESZLER) 3. Ausrüstung (K. DRESZLER) 4. Klimatische Bedingungen (K. DRESZLER) Teil II: Meßverfahren und -ergebnisse 1. Geodätische und kartographische Grundlagen 1.1. Festpunkte (R. EGER) 1.2. Kartenunterlagen (K. DRESZLER) 2. Geodätisch-glaziologische Traverse 2.1. Erkundung und Signalisierung (S. MEIER} 2.1.1. Verlauf der Traverse 2.1.2. Erkundung, Punktabstand 2.1.3. Signalisierung 2.2. Lagemessung und trigonometrische Höhenübertragung 2.2.1. Streckenmessung 2.2.2. Winkelmessung 2.2.3. Technologischer Ablauf 2.2.4. Auswertung der Messungsergebnisse 2.3. Astronomische Beobachtungen (R. DIETRICH) 2.4. Deformationsraten (S. MEIER) 2.5. Barometrisches Höhenprofil (R. DIETRICH) 2.5.1. Zielstellung 2.5.2. Das Meßverfahren 2.5.3. Diskussion der Fehlereinflüsse 2.5.3.1. Fehler im angenommenen theoretischen Modell 2.5.3.2. Fehler bei der praktischen Messung 2.5.4. Ergebnisse 2.6. Oberflächenneigungen (S. MEIER) 2.7. Photogrammetrische Geländeaufnahmen (K. DRESZLER) 2.7.1. Zunge des Hays-Gletschers 2.7. 2. Einzugsgebiet des Hays-Gletschers 2.8. Glaziologische Arbeiten (S. MEIER) 2.8.1. Ziel der Feldarbeiten 2.8.2. Pegelablesungen 2.8.3. Überblick über Firnaufgrabungen. Firnschichtung 2.8.4. Dichtemessungen 2.8.5. Firntemperaturmessungen 2.8.6. Akkumulationsraten und -profile 2.8.7. Oberflächenbeobachtungen 3. Bewegungsmessungen am Hays- und Campbell-Gletscher 3.1. Photogrammetrjsche Bewegungsmessungen am Hays- und Campbell-Gletscher (K. DRESZLER) 3.2. Auswertung photogrammetrischer Bewegungsmessungen (S. MEIER) 3.2.1. Auswerteziel 3.2.2. Auswertefolge 3.2.3. Besonderheiten 3.2.4. Ergebnisse 3.2.5. Meßfehler 3.3. Trigonometrische Bewegungsmessungen am Campbell-Gletscher (R. EGER) 4. Eisdickenmessungen und Meereslotungen 4.1. Ergebnisse von Radarsondierungen (Messung V. I. CUDAKOV) G. W. TREPOV, Bearbeitung S. MEIER) 4.2. Ergebnisse von Gravimetermessungen (Messung N.D. TRETJAKOV, Bearbeitung C. OELSRER) 4.3. Drahtlotung Spooner-Bucht (S. MEIER) 5. Sonderarbeiten 5.1. Results of meteorological Observations at Camp Abendberg and during the oversnow traverses (E. KAUP) 5.1.1. Meteorological observations at Camp Abendberg 5.1.2. Meteorological Observations during the oversnow traverses 5.2. Küstennahe Ablation und temperierte Firnschicht (S. MEIER) 5.3. Analyse der Sedimentprobe vom Boden der Spooner-Bucht (J. ELIDBERG, F. FALK) 5.4. Refraktionsbeobachtungen (R. EGER) 5.4.1. Beobachtungsprogramm 5.4.2. Beobachtungsergebnisse 5.5. Untersuchungen zur barometrischen Höhenbestimmung von Einzelpunkten (R. DIETRICH) 5.5.1. Einführung 5.5.2. Beobachtungsverfahren und -geräte 5.5.3. Auswertungsmethode 5.5.4. Ergebnisse 5.5.5. Zusammenfassung und Schlußfolgerungen 5.6. Topographische Aufnahme der Berge der Deutsch-Sowjetischen Freundschaft (K. DRESZLER) 5.6.1. Allgemeine Beschreibung 5.6.2. Topographische Aufnahme 5.6.3. Photogrammetrische Auswertung 5.6.4. Kartographische Arbeiten (H. BRUNNER) 5.6.5. Ergebnis Teil IIIa Glaziologische Ergebnisse der Feldarbeiten (S. MEIER) 1. Topographie und Orographie 1.1. Topographie der Eisoberfläche 1.2. Topographie des Felsuntergrundes. Eisdicken 1.3. Abflußgebiete. Gletschergrenzen 1.4. Frontlagen und -höhen 2. Eisbewegung und Deformation 2.1. Frühere Beobachtungen am Hays- und Campbell-Gletscher 2.2. Geschwindigkeitsfeld Hays-Gletscher 2.3. Querkontraktion und Längsdilatation 2.4. Zeitliche Bewegungsschwankungen 2.5. Bewegung der schwimmenden Zunge und Kalbungsrhythmus 2.6. Geschwindigkeit und Kalbungsrhythmus des Campbell-Gletschers 3. Eigenschaften des Oberflächenfirns 3.1. Temperaturen und Temperaturgradienten 3.2. Dichte, Härte, Schichtung 3.3. Vorherrschende Winde und Schneedrift 4. Komponenten des Massenhaushalts 4.1. Schneeakkumulation 1972 4.2. Schneeablation 1972/73 4.3. Eisausstoß 5. Zusammenfassung und Schlußfolgerungen Literatur Anlagen Kartenbeilage , Zusammenfassung in russischer Sprache , Text teilweise in kyrillischer Schrift , Beiträge teilweise in deutscher, teilweise in englischer Sprache
    Location: Upper compact magazine
    Location: AWI Archive
    Location: MOP - must be ordered
    Branch Library: GFZ Library
    Branch Library: AWI Library
    Branch Library: GFZ Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/13
    In: CRREL Report, 83-13
    Description / Table of Contents: A review on past experimental and theoretical work indicates a need for additional experimentation to characterize the response of snow to inelastic pressure waves. Pressure data from previously conducted explosion tests are analyzed to estimate the elastic limit of snow of 400 -kg/cu m density to be about 36 kPa. This pressure corresponds to a scaled distance of 1.6 m/cu.rt.kg for charges fired beneath the surface of the snow, and to a scaled distance of 1.2 m/cu.rt.kg for charges fired in the air. The effects of a snow cover on the method of clearing a minefield by using an explosive charge fired in the air above the snow surface are also discussed and recommendations are given for further work in this area. Explosive pressure data are used to estimate the maximum effective scaled radius for detonating buried mines at shallow depth to be 0.8 m/cu.rt.kg. Fuel-air explosive will increase this effective radius significantly because of the increase in the size of the source region.
    Type of Medium: Series available for loan
    Pages: 33 Seiten , Illustrationen
    Series Statement: CRREL Report 83-13
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Introduction Objectives Background Problems in describing the response of snow to an applied stress Methods of determining the dynamic behavior of materials Review of previous studies on snow Experimental measurements on snow Summary of snow experiments Theoretical studies Confirmation of the theory Discussion Applications Recommendations Summary Literature cited Appendix A. Selected data from Wisotski and Snyder (1966) Appendix B. Pressure data from Livingston (1964)
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    Call number: ZSP-201-83/14
    In: CRREL Report, 83-14
    Description / Table of Contents: An analysis of ice fracture that incorporates dislocation mechanics and linear elastic fracture mechanics is discussed. The derived relationships predict a brittle to ductile transition in polycrystalline ice under tension with a Hall-Petch type dependence of brittle fracture strength on grain size. A uniaxial tensile testing technique, including specimen preparation and loading system design was developed and employed to verify the model. The tensile strength of ice in purely brittle fracture was found to vary with the square root of the reciprocal of grain size, supporting the relationship that the theory suggests. The inherent strength of the ice lattice and the Hall-Petch slope are evaluated and findings discussed in relation to previous results. Monitoring of acoustic emissions was incorporated in the tests, providing insights into the process of microfracture during ice deformation.
    Type of Medium: Series available for loan
    Pages: 43 Seiten , Illustrationen
    Series Statement: CRREL Report 83-14
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background Development of testing technique Test specimens Tensile testing Compression testing Experimental results Tensile tests Compression tests Discussion Conclusions Suggestions for further work Literature cited Appendix A: Additional information on seed grains Appendix B: Thin-sectioning procedure Appendix C: Displacement transducer calibration
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/16
    In: CRREL Report, 83-16
    Description / Table of Contents: The presence of snow on the ground can impose limitations on the mobility of wheeled and tracked vehicles. Snow depth and density are the two most easily measured snow properties that can be related to mobility over snow. Existing models of snowpack accumulation and ablation processes and models of internal snowpack structure were examined to determine if a model of the snowpack can be developed for use in predicting the snow parameters that affect mobility. Simple models, such as temperature index models, do not provide sufficient snowpack details, and the more detailed models require too many measured inputs. Components of the various models were selected from a basis of a snowpack model for predicting snow properties related to mobility over snow. Methods of obtaining the input data from some components are suggested, and areas where more development is needed are described.
    Type of Medium: Series available for loan
    Pages: 34 Seiten , Illustrationen
    Series Statement: CRREL Report 83-16
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Conversion of metric units Introduction Review of existing models Accumulation models Ablation models Using existing models for studying mobility Proposed snowpack model for mobility studies Model components Implementation of the model Developing input data Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/4
    In: CRREL Report, 83-4
    Description / Table of Contents: Measurements and analysis of seasonal ice growth and decay on Post Pond, New Hampshire, for the period 1973-1982 are presented. Observations included ice thickness measurements, examination of the various ice types contributing to the ice cover, and measurements of meteorological parameters for correlation with and modeling of the ice growth process. The overall nature of ice growth and decay (ice loss) on the Post Pond has been ascertained, the seasonal variability in the timing of freeze-up and ice-out and the duration of the ice cover have been determined, and the relationship of ice growth to freezing-degree-day (deg C) records evaluated on the basis of a Stefan conduction equation modified to deal with ice sheets covered with or free of snow. Ice growth occurs predominantly by the direct freezing of lake water, but snow ice may compose as much as 50% of the ice cover in winters with higher than average snowfall. Freeze-up leading to the establishment of a stable ice cover occurs during the 4-week period from the end of November to the end of December. Maximum seasonal ice thicknesses were from 45 to 67 cm and are generally attained during the first two weeks of March; ice-out, marking the final disappearance of ice from Post Pond, usually occurs by the third week of April. The overall rate of the ice loss is three to four times that of ice growth, and is dominated initially by melting from the top. As much as 50% of the ice may be lost in this way before the onset of any bottom melting. Final dissipation of the ice cover is usually expedited by candling resulting from preferential melting and disintegration of the ice at crystal boundaries.
    Type of Medium: Series available for loan
    Pages: iv, 30 Seiten , Illustrationen
    Series Statement: CRREL Report 83-4
    Language: English
    Note: CONTENTS Abstract Preface Introduction Location of study Study methods Ice thickness Ice-cover composition Surface air temperatures Freeze-up and ice-out characteristics Results and discussion Ice-growth record Freezing-degree-day records Ice-growth predictions Summary and conclusions Literature cited Appendix A: Ice-growth records Appendix B: Measured and computed ice-growth curves
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 48
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/1
    In: CRREL Report, 83-1
    Description / Table of Contents: Roof snow load case studies gathered throughout the United States over a three-year period are analyzed. The objective of the analysis is to determine a relationship between the snow load on the ground and the corresponding uniform snow load on flat and sloped roofs. The main parameters considered are the thermal characteristics of the roof, the roof slope and the exposure of the structure. Exposure has the strongest effect on the ratio of ground to roof snow loads. Comparisons are made with existing and proposed building codes and standards.
    Type of Medium: Series available for loan
    Pages: iv, 47 Seiten , Illustrationen
    Series Statement: CRREL Report 83-1
    Language: English
    Note: CONTENTS Abstract Preface Metric conversion table Introduction Data base Conversion factor Ground load effects Exposure effects Thermal effects Slope effects Expected value relationship Comparison with existing codes and standards Comparison with relationships proposed in new ANSI standard Summary and conclusions Literature cited Appendix A. Roof snow load case history reports Appendix B. Roofs in the snow load case study data base Appendix C. Ground and roof snow load data Appendix D. Conversion factors from the 1982 ANSI standard
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 49
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/24
    In: CRREL Report, 84-24
    Description / Table of Contents: This report describes the growth characteristics and crystalline textures of urea ice sheets which are now used extensively in the Cold Regions Research and Engineering Lab. (CRREL) test basin for modeling sea ice. The aims of the report are to describe the different kinds of crystalline texture encountered in urea ice sheets and to show that even small variations in texture can drastically influence the mechanical behavior of urea ice sheets. Standard petrographic techniques for studying microstructure in thin sections were used on 24 urea ice sheets. These investigations entailed observations of the crystalline texture of the ice (including details of the subgrain structure), grain size measurements, and studies of the nature and extent of urea entrapment and drainage patterns in the ice. Increased knowledge of the factors controlling the crystalline characteristics of urea ice sheets has progressed to the point where test basin researchers at CRREL are now able to fabricate ice sheets with prescribed structures leading to predictable mechanical properties. Originators supplied keywords include: Sea ice, and Mechanical properties.
    Type of Medium: Series available for loan
    Pages: iv, 55 Seiten , Illustrationen
    Series Statement: CRREL Report 84-24
    Language: English
    Note: Contents: Abstract Preface Introduction Objectives Analytical techniques Procedures for growing urea ice sheets Analysis of the crystalline structure of urea ice Characteristics of urea ice Results and discussion Ice sheet no. 1 Ice sheet no. 2 Ice sheet no. 3 Ice sheet no. 4 Ice sheet no. 5 Ice sheet no. 6 Ice sheet no. 7 Ice sheet no. 8 Ice sheet no. 9 Ice sheet no. 10 Ice sheet no. 11 Ice sheet no. 12 Ice sheet no. 13 Ice sheet no. 14 Ice sheet no. 15 Ice sheet no. 16 Ice sheet no. 17 Ice sheet no. 18 Ice sheet no. 19 Ice sheet no. 20 Ice sheet no. 21 Ice sheet no. 22 Ice sheet no. 23 Ice sheet no. 24 Urea concentrations in test tank solution and ice Discussion and conclusions E/σf ratio Thickness of incubation layer Crystal properties Literature cited Appendix A: Thin sections of urea ice sheets
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 50
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/19
    In: CRREL Report, 84-19
    Description / Table of Contents: In this study a method for making long-range forecasts of freeze-up dates in rivers is developed. The method requires the initial water temperature at an upstream station, the long-range air temperature forecast, the predicted mean flow velocity in the river reach, and water temperature response parameters. The water temperature response parameters can be either estimated from the surface heat exchange coefficient and the average flow depth or determined empirically from recorded air and water temperature data. The method is applied to the St. Lawrence River between Kingston, Ontario, and Massena, New York, and is shown to be capable of accurately forecasting freeze-up. Originator-supplied keywords include: Ice formation, and River ice.
    Type of Medium: Series available for loan
    Pages: iii, 22 Seiten , Illustrationen
    Series Statement: CRREL Report 84-19
    Language: English
    Note: CONTENTS Abstract Preface Introduction Problem formulation Analytical treatment Application to the upper St. Lawrence River Summary Literature cited Appendix A: Basic program for St. Lawrence River freeze-up forecast
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 51
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/17
    In: CRREL Report, 84-17
    Description / Table of Contents: VHF-band radiowave short pulses were transmitted within the permafrost tunnel at Fox, Alaska, over distances between 2.2 and 10.5 m. The propagation medium was a frozen silt containing both disseminated and massive ice with temperatures varying from -7°C near the transmitter to probably -2 C near the center of the tunnel overburden. The short pulses underwent practically no dispersion in the coldest zones but did disperse and refract through the warmer overburden, as suggested by calculations of the effective dielectric constant. Most significantly the measured frequency content decreased as the effective dielectric constant increased. The results indicate that deep, cross-borehole pulse transmissions over distances greater than 10 m might be possible, especially when the ground is no warmer than -4°C. The information thus pined could be used for identifying major subsurface variations, including ground ice features.
    Type of Medium: Series available for loan
    Pages: ii, 14 Seiten , Illustrationen
    Series Statement: CRREL Report 84-17
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 52
    Call number: ZSP-201-83/7
    In: CRREL Report, 83-7
    Description / Table of Contents: Peak power generation with hydropower creates tailwater flow conditions characterized by high and low flows with abrupt transitions between these states. Flows occurring in tailwaters typically form sharp-fronted, large-amplitude waves of relatively short period. An understanding of the mechanics of downstream propagation of these waves is important both for direct application in studies of the tailwater and because of the similarity of these waves to those following a dam break. An analysis of the dynamic equations of open channel flow is used to quantify the relative importance of flow wave convection, diffusion and dispersion in rivers. The relative importance of each process is re­lated to the relative magnitude of terms in the dynamic equations, providing a physical basis for model formulation. A one-dimensional diffusion wave flow routing model, modified for tailwaters, simulates the important physical pro­cesses affecting the flow and is straightforward to apply. The model is based upon a numerical solution of the kine­matic wave equation. The “modified equation,” Hirt, and von Neumann analyses are used to gain insight into the stability and dissipative and dispersive behavior of the numerical solution, and results of these analyses are compared. A set of linear routings is used to demonstrate the dissipative and dispersive behavior predicted by the analyses and to verify the accuracy of an expression that quantifies the numerical diffusion of the model. The analyses provide a basis for selection of numerical parameters for model applications. The capability and accuracy of the model are enhanced when physical wave diffusion is balanced by numerical diffusion in the model. Maintaining the diffusion balance re­quires that the time derivative weighting parameter 0 be variable and in some instances negative. Though some amount of phase error is introduced, negative 0 values have no adverse effect upon model stability. Field studies were con­ducted to demonstrate the benefits of careful model development and analysis, and to verify the diffusion wave model for rapidly varying tailwater flow. The bed slope and roughness characteristics of the field study reaches (below Apalachia and Norris Dams) differ greatly, spanning those of a large number of rivers of practical interest. The accurate simulation of flow in both of these tailwaters attests to the soundness of both the physical basis of the model and the numerical solution technique. The field studies confirm, for the extreme case of rapidly varying flow in a mildly sloped river, that inertia has a negligible effect upon unsteady flow waves at low Froude numbers. Additionally, these studies verify that diffusion of short-period waves in rivers is generally significant.
    Type of Medium: Series available for loan
    Pages: vi, 41 Seiten , Illustrationen
    Series Statement: CRREL Report 83-7
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Physical diffusion and dispersion in open channel flow Modeling approach Description of the diffusion wave flow routing model Analysis of the numerical model Modified equation and Hirt analyses of diffusion wave model von Neumann analysis of the diffusion wave model Linear case studies Accuracy considerations of the numerical solution Field studies Apalachia Dam tailwater Norris Dam tailwater Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 53
    Call number: ZSP-980-70
    In: 2nd Working Meeting "Radioisotope Application and Radiation Processing in Industry", Part 2, 50 to 97
    In: ZfI-Mitteilungen, Nr. 70
    Type of Medium: Series available for loan
    Pages: 355 Seiten , Illustrationen
    ISSN: 0323-8776
    Series Statement: ZfI-Mitteilungen 70
    Language: English
    Note: Contents of Part 2 Hecht, K. Gerber, R. Otto: Studies on the drying of paints by means of 14C-labelled compounds K. Wagner, F. Brutschin, I. Ritter, T. Gritsch, H. Zimmermann, H. Borchert: Investigations by the aid of radioisotope methods on the technology of the production of carbon and silicon carbide materials K. Gloe, P. Mühl: Determination of metal extraction process parameters using tracer technique W. Migdał, W. Łada, K. Malec-Czechowska: Studies on liquid-liquid extraction of noble metals using radiotracers L. Petryka, K. Przewłocki: Radiotracer investigations of benefication copper ore in the industrial flotation process Z. Bazaniak, J. Palige: Determination of Cu recovery degree from slags in shaft process by means of radiotracers R. Burek, J .K. Zurawicz: On the optimization of concentration measurements in heterogeneous materials based on β-backscatter measurements B. Heinrich: Analysis of carbon content in crude brown coal by inelastic scattering of neutrons and the method of time correlated associated particles P. Urbańaki, D. Wagner, M. Jankowska, E. Kowalska: Determination of calcium and iron and measurements of ash content in the brown coal H.-W. Thümmel: Some considerations relating to the prediction of the efficiency of radiometric methods for the continuous ash content determination of coal L. Wawrzonek: Monitor of ash content of coal with X-ray source I. Pavlicsek, V. Stenger, A. Veres: Apparatus for gamma activation analysis I. Végvári, I. Juhász: Determination of PbO content of lead-glass samples on the ground of gamma-absorption E. Schöntube, H.-J. Große: Aerosol ionization gas analysis as a monitoring for waste halothane in the atmosphere of operating theatre S. Mothes, P. Popp, G. Oppermann, W.-D. Herberg: Measurement of fluorocarbons with the ECD P. Popp, E. Schöntube, G. Oppermann: The usability of radiation ionization detectors for the determination of N2O concentrations in the air of operating theatres P. Popp, G. Arnold, G. Oppermann: A hydrocarbon-sensitized argon ionization detector for the detection of inorganic compounds R. Szepke, W. Lisieski, J. Harasimczuk: Automatic dust monitor AMIZ G. Vormum: Sealed sources - problems of design, measurement and quality control L. Gąsiorowski: New trends in developments of ratioisotope gauges in Poland G. Brunner: Direct chemical information from special radio tracers as well as from outer X-ray excitation J. Hirling: Experience and future trend in industrial application of nuclear methods in Hungary I. N. Ivanov, O. K. Nikolaenko, Yu. V. Phecktistov, V. L. Chulkin: Use of short-lived nuclides in activation analysis Kl.-P. Rudolph, J. Flachowsky, A. Lange: Trace element determination in semiconducter selenium by neutron activation analysis (NAA) W. Lisieski, J. Mirowicz: Some industrial applications of instruments with neutron sources R. Dybczyński, H. Maleszewaka, S. Sterliński, Z. Szopa, M. Wasek: Some problems in neutron activation determination of gold and silver in ores and concentrates of copper industry L. Jankowski: Cost-benefit aspects of radioisotope application in industry B. Manouchev, T. Boschkova, L. Tsankov, V. Gurev, I. Kojucharov, G. Grozev: On the possibilities of the direct gamma-spectremetry in natural waters P. Morgenstern, D. Müller, W. Riedel: A parallel grid proportional scintillation counter for the X-ray region from 3 to 20 keV with regard to high count rates N. A. Anders, V. S. Isaev, V. I. Filatov, B. E. Kolesnikov, D. Müller, P. Morgenstern, W. Riedel, V. P. Varvaritsa: X-ray fluroescence analyzer of light elements with proportional scintillation counter D. Müller, P. Morgenstern, W. Riedel, W. Warwariza, B. E. Kolesnikow, N. A. Anders, W. J. Filatov: General considerations concerning the use of the X-ray analyzer "RALE" in industry
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 54
    Call number: ZSP-980-71
    In: 2nd Working Meeting "Radioisotope Application and Radiation Processing in Industry", Part 3, 98 to 155
    In: ZfI-Mitteilungen, Nr. 71
    Type of Medium: Series available for loan
    Pages: 368 Seiten , Illustrationen
    ISSN: 0323-8776
    Series Statement: ZfI-Mitteilungen 71
    Language: English
    Note: Contents of Part 3 P. Popp, J. Leonhardt: Characterization of coulometric and hypercoulometric ECD mode of operation D. Hinneburg, H.-J. Grosse, J. Leonhardt, P. Popp: Calculation of current-voltage characteristics of electron-capture detectors A.G. Rozno, V.V. Gromov: Study of volume electric charge in radioactive dielectrics by the method of "acoustic sounding" Iv. N. Pandev, M.G. Christova, St.D. Stefanov, N.V. Gentchev, St.T. Bakardjiev, D.T. Genov, Ch.D. Christov: Portable gamma-irradiator - modified model P. Hargittai, V. Stenger: Planning of dose-rate distribution of radiation fields by computer M. Remer: DOSKMF2 - A contribution to the computer-aided design of dose rate distributions A. Heger, H. Dorschner, W. Schumann, D. Pleul: Characterization of the radiation field and control of the optimal electron beam accelerator operation for industrial processes V. Prenerov, K. Shivarov, P. Ivanov: Programme for radiation protection by using portable defectoscopes in industrial building T. Geßner, K. Irmer: Nuclear radiation detectors using high resistivity neutron transmutation doped silicon H.-G. Könnecke, D. Luther: The influence of airing systems on the residence time in biological clarification plants J. Dermietzel, C. Wienhold, H. Grundmann, A. Staschok, J. Koch, E. Bordes: Tracer studies on carbon monoxide and carbon dioxide formation in liquid phase oxidation of p-xylene W. Smułek: Use of technical mixtures of carboxylic acids to the extraction of silver H. Förster: Determination of oxide film thickness on aluminium using 14-MeV neutron activation and BET method H. Jaskólska, L. Waliś, C. Janusz: Investigations of the monocrystallization process of neodymium doped YAG using radiotracers H. Wagler: Substoichiometric determination of Pd-II-traces with dithizone and problems of determination P. Tábor, L. Molnár, D. Nagymihá!yi: Radioisotope gauge for automatic control of cottonwool package H.-W. Thummel, G. Körner, D. Fritzsche: Compensation for thickness variations in determining the bulk material composition on conveyor belts using combined scatter-transmission and thickness measuring methods D. Fritzsche, W. Dolak: Radiometric determination of ash content of raw lignites M. Braune: A simplified mathematical model for scattered transmission of X-rays in raw brown coal P. S. Kamenov, E. I. Vapirev, S. I. Ormandjiev: A new type of nuclear weighing device for transporter belts W. Smulek, M. Borkowski: Separation of reduced molybdenum from fission products. The Mo - HN03 - HDEHP system J. Komosiński, M. Radwan: Selected problems of radioisotope technique for wear investigation of precise elements Dr. A. Várkonyi: The thin layer activation for industry G. Hartmann, P. Kulicke: Wear testing in power stations J. Kraś, Z. Banasik: The radioisotopes in wear investigation of combustion engines H.-D. Grohmann: Short-time measurements of wear on surface activated rails G.M. Ter-Akopian, E.A. Sokol, Fam Ngok Chyong, M.P. Ivanov, L.P. Chelnokov, V.I. Smirnov, V.A. Gorshkov: Neutron multiplicity detector for the study of rare nuclear decay events L. Gąsiorowski, P. Mroziński, K. Sobkowicz, F. Zrudelny: Implementation of Intel 8080 - based microcomputer system in the radioisotope measurements control instrumentation W. Birkholz, M. Steinert: Evaluation of autoradiograms using a microcomputer F. Myšák, M. Krejči, J. Hakl, E. Smrkovský: Study of boron diffusion in high temperature Ni-base alloys by means of solid state track detectors W. Birkholz, H.-Ch. Treutler, K. Freyer, M. Geisler, J. Dubnack: Autoradiography of gallium in silicon H.C. Treutler, K. Freyer: On quantitative autoradiography of semiconductor basic material A.S. Shtan': Radiation evaluation techniques and facilities used for quality assurance of fuel elements and fuel assemblies for nuclear power plants D. Babić, A. Šafranj, V. Marković: Radiation degradation of poly-propylene-molecular weight and melt viscosity change A. Ciszek: Modern irradiation processes equipment-accelerators and their applications G. Kummer: Identification of signals by means of the decision theory N.S. Batchvarov, I.D. Vankov, L.P. Dimitrov, Ch.D. Shukov, P.A. Pavlov: Betareflektometer SR-77
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 55
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/26
    In: CRREL Report, 76-26
    Description / Table of Contents: Debris over a 44-mile stretch of the Chena River was studied. The study area extended from the first bridge on the Chena Hot Springs Road to the Chena River Flood Control damsite. The purpose of the study was to assess the potential danger to the Chena River Flood Control Dam outlet structure. Debris was catalogued, log jams were measured, and sources of debris were studied. The average size of logs was determined, as well as the number of logs present on the river. The authors concluded that a serious debris problem existed and would remain serious for the foreseeable future. Recommendations for debris handling were made.
    Type of Medium: Series available for loan
    Pages: iv, 17 Seiten , Illustrationen
    Series Statement: CRREL Report 76-26
    Language: English
    Note: Contents Abstract Preface Summary Introduction Origin of debris Volume, magnitude Types of debris Hazards of the debris Recommended measures to counteract log jamming Conclusions and recommendations Future work Epilogue Selected bibliography Appendix: Additional photographs of Chena River debris
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 56
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/41
    In: CRREL Report, 76-41
    Description / Table of Contents: Eight Geoceiver stations were established and suitably marked along or near the crestiline of the Greenland ice sheet during GISP field operations from 1971 to 1975. At one of these stations, DYE-3, repeated Geoceiver positions indicate an ice velocity of 12.7 m.yr on an azimuth of approximately 60 degrees. Data from the International Greenland Glaciological Expedition (EGIG) surveys show that ice flow in the vicinity of Crete is radiating outward from a dome to the south. Two independent calculations of the state of equilibrium at Crete indicate ice sheet thinning rates of 0.25 to 0.37 m/yr, while direct measurement of elevation change by EGIG indicates an ice sheet thickening rate of difference of 0.06 m/yr. Resolution of these differences must await further geophysical work and deep drilling in the ice sheet.
    Type of Medium: Series available for loan
    Pages: iii, 13 Seiten , Illustrationen
    Series Statement: CRREL Report 76-41
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 57
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/44
    In: CRREL Report, 76-44
    Description / Table of Contents: The deformation of wet snow is explained in terms of the thermodynamics of the three phases of water. When deformation by particle rearrangement is fully developed, deformation can occur most rapidly by melting at the particle contacts. The rate of deformation is highly sensitive to the liquid water content, ionic impurity content, particle contact area, and stress level. A model of the hydrostatic deformation of wet snow is constructed, and examples of the deformation of wet snow are given for a variety of conditions. These results are in agreement with existing experimental evidence. The model accurately simulates the transient nature of the deformation and the effect of water content on the quasi-stable density of wet snow subjected to a constant stress.
    Type of Medium: Series available for loan
    Pages: iv, 9 Seiten , Illustrationen
    Series Statement: CRREL Report 76-44
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 58
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/43
    In: CRREL Report, 76-43
    Description / Table of Contents: Ice fog generated at the Eielson AFB power plant cooling pond contributes heavily to the total ice fog problem on the base. Several methods for ice fog suppression were studied and two techniques were tested experimentally. Experiments were also conducted to determine the magnitude of the various modes of heat transfer within the pond's microclimate. Values of evaporative and radiative heat loss during ice fog are presented. Ice cover is shown to be an effective ice fog suppression technique. Monomolecular films are also shown to be effective and offer some unique advantages, such as ease of application and low overall cost. The heat normally lost to evaporation must be dissipated by other means during suppression. With the ice cover technique this is accomplished by melting the ice cover. During suppression with monomolecular films, the heat must be dissipated by increasing radiative and convective losses. The simplicity of application of monomolecular films, along with their lower cost, combine to make this technique attractive; however, the lower pond temperatures and increased suppression effectiveness weigh heavily in favor of the ice-cover technique.
    Type of Medium: Series available for loan
    Pages: viii, 86 Seiten , Illustrationen
    Series Statement: CRREL Report 76-43
    Language: English
    Note: CONTENTS Abstract Preface List of symbols Conversion factors: U.S. customary to metric units of measurement Introduction Section I. Ice fog Section II. Evaporation Bowen's equation Evaporation equation Evaporation measurements during ice fog conditions Evaporation measurements at Eielson Power Plant cooling pond Data analysis Section Ill. Radiation during ice fog Brunt's equation Ångström equation Elsasser's equation Cloud cover Reflection Field experimental results Analysis of experimental results Radiation equations for ice fog Transmissivity of ice fog Radiation model Wind effect Summary Section IV. Convection Convective heat transfer theory Rotem and Claassen equation Kay's approach Russian approach Analysis Heat budget at the surface Conclusions Section V. Ice fog suppression techniques Fans Injection wells Latent heat storage Monomolecular films Use of heated water from the cooling pond Section VI. Latent heat storage experiments Freezing rates Cooling pond Ice building Ice growth rate -maximum system limitation Evaporation heat loss -maximum Realistic growth rate Ice building techniques Ice volume measurements Melting experiments Ice fog suppression considerations Experimental results Section VII. Recommendations and conclusions Hexadecanol studies Injection well suppression Latent heat storage suppression Comparison of approaches Measurements of evaporation Measurements of radiation loss Convective heat losses Ice fog suppression Selected bibliography Appendix A. Convective heat transfer coefficient from water to ice and from ice to air
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 59
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/46
    In: CRREL Report, 76-46
    Description / Table of Contents: The topological properties of 10 stream networks having moderate to well developed trellis drainage patterns have been compared with those expected in a topologically random population. Magnitude 4 subnetworks show a systematic departure from expectation which can be related to geological controls. A link type classification system was developed and a series of equations describing the probability of occurrence of link types in topologically random populations derived. Analysis of the link structure in the channel networks showed small but persistent deviations from expectation in the well developed trellis pattern streams. The general conclusion is that the topologically random model is a very useful standard with which to compare real channel networks.
    Type of Medium: Series available for loan
    Pages: vi, 54 Seiten , Illustrationen
    Series Statement: CRREL Report 76-46
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 60
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/5
    In: CRREL Report, 83-5
    Description / Table of Contents: This report presents the results of dynamic ice-structure interaction model tests conducted at the CRREL Ice Engineering Facility. A flexible, single-pile, bottom-founded offshore structure was simulated by a test pile with about a one-to-ten scale ratio. Urea (instead of sodium chloride) was used as dopant to scale down the ice properties, resulting in good model ice properties. Six ice fields were frozen and 18 tests carried out. In all cases distinctive dynamic ice structure interaction vibrations appeared, from which abundant data were collected. In tests with linear ice velocity sweep, sawtooth-shaped ice force fluctuations occurred first. With increasing velocity the natural modes of the test pile were excited, and shifts from one mode to another occurred. The maximum ice force values appeared mostly with low loading rates, but high forces appeared random'y at high ice velocities. As a general trend, ice force maximums, averages and standard deviations decreased with increasing ice velocities. The aspect ratio effect of the ice force in continuous crushing follows the same dependence as in static loadings. The frequency of observed ice forces is strongly dominated by the natural modes of the structure. Dynamically unstable natural modes tend to make the developing ice force frequencies the same as the natural frequencies. Otherwise the resulting frequency depends directly on structural stiffness and ice velocity and inversely on the ice force range. During vibrations the displacement rates of the structure overcome the velocity of ice, making low loading rates and hence high ice forces possible. During crushing, ice induces both positive and negative damping.
    Type of Medium: Series available for loan
    Pages: iv, 53 Seiten , Illustrationen
    Series Statement: CRREL Report 83-5
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test arrangements Ice properties Crushing patterns Maximum ice force vs velocity Dynamic aspect ratio effect and crushing strength Measured ice force frequencies Calculated ice force frequencies Accelerations, velocities and displacements Damping Ice-induced negative damping Limit cycles Buckling load Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 61
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/15
    In: CRREL Report, 84-15
    Description / Table of Contents: Measurements of meltwater pH from annual layers of South Pole firn and ice samples ranging in age from 40 to 2000 years B.P. show that precipitation at this remote site has a higher natural acidity than that expected from atmospheric equilibrium with CO2. The average pH of deaerated (CO2-free) samples was 5.64 + or - 0.08, while air-equilibrated samples averaged 5.37 + or - 0.008, a pH that is about a factor of two more acidic than the expected background pH of 5.65. The observed 'excess' acidity can be accounted for by natural SO4(2)- and NO(3)- levels in the samples probably originating from non-anthropogenic H2SO4 and HNO3. Because of the presence of these naturally occurring acids in South Pole precipitation, a pH of 5.4 is considered a more representative baseline reference pH for acid precipitation studies.
    Type of Medium: Series available for loan
    Pages: ii, 12 Seiten , Illustrationen
    Series Statement: CRREL Report 84-15
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 62
    Call number: ZSP-201-84/16
    In: CRREL Report, 84-16
    Description / Table of Contents: Phase composition curves are presented for a typical saline silt from Lanzhou, P.R.C., and compared to some silts from Alaska. The unfrozen water content of the Chinese silt is much higher than that of the Alaskan silts due to the large amount of soluble salts present in the silts from China, which are not present in silt from interior Alaska. When the salt is removed, the unfrozen water content is then similar for both the Chinese and Alaskan silt. Here we introduce a technique for correcting the unfrozen water content of partially frozen soils due to high salt concentrations. We calculate the equivalent molality of the salts in the unfrozen water at various temperatures from a measurement of the electrical conductivity of the extract from saturated paste.
    Type of Medium: Series available for loan
    Pages: iii, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 84-16
    Language: English
    Note: Contents Abstract Preface Introduction Background Materials Sample preparation Nuclear magnetic resonance Specific surface area Electrical conductivity Results and discussion Summary Literature cited Appendix A: Unfrozen water content vs temperature data for Lanzhou silt
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 63
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/18
    In: CRREL Report, 84-18
    Description / Table of Contents: This report investigates the influences of turbulence and water temperature on frazil ice formation. The rate and thequantity of frazil ice formed in a specified volume of supercooled water increase with both increasing turbulence inten-sitv and decreasing water temperature. The influence of turbulence intensity on the rate of frazil ice formation, how-ever. is more pronounced for larger initial supercooling. The turbulence characteristics of a flow affect the rate offrazil ice formation by governing the temperature to which the flow can be supercooled, by influencing heat transferfrom the frazil ice to surrounding water, and by promoting collision nucleation, particle and floc rupture and increasingthe number of nucleation sites. larger frazil ice particles formed in water supercooled to lower temperatures. The par-ticles usually were disks, with diameters several orders greater than their thickness. Particle size generally decreased with increasing turbulence intensity. This report develops an analytical model, in which the rate of frazil ice formation isrelated to temperature rise of a turbulent volume of water from the release of latent heat of fusion of liquid water toice. Experiments conducted in a turbulence jar with a heated, vertically oscillating grid served both to guide and tocalibrate thanalytical'model as well as to afford insights into frazil ice formation. The formation of frazil ice wasstudied for Vemperatures of supercooled water ranging from -0.9° to -0.050°C.
    Type of Medium: Series available for loan
    Pages: vi, 50 Seiten , Illustrationen
    Series Statement: CRREL Report 84-18
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Background Scope of study Literature review Introduction Incipient formation of frazil ice Particle size and evolution of frazil ice Influences of turbulence and water temperature on the rate of frazil ice formation Conclusions Analytical model Introduction Elements of heat transfer Elements of turbulence Experimentation Experimental apparatus Experimental procedure Results Introduction Nucleation of frazil ice Influences of turbulence on frazil ice formation Water temperature Influences of water temperature and turbulence on the concentration of frazil ice Frazil ice particle shape and size Conclusions Literature cited Appendix A: Preliminary frazil ice experiments Flume experiments Couette-flow Appendix B: Listing of computer program for calculation of frazil ice formation Appendix C: Water temperature rise attributable to frazil ice formation as computed usingthe analytical model .
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 64
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/12
    In: CRREL Report, 84-12
    Description / Table of Contents: Icing on stationary structures such as oil rigs is becoming an increasingly serious problem as offshore drilling operations in the subpolar regions become more common. Little information exists on this subject. Extensive observations have been made of icing on the upper structures of moving ships, but the complexity of this problem makes analysis of the results very difficult. Even the generation of water drops in this case involves many factors, such as windspeed, wave direction relative to the bearing of the ship, and size and free-board of the ship. On stationary structures, however, the problem is much simpler, since the major factor in drop generation is whitecaps produced by wind, and no motion of the structure is involved. In the present study, a theoretical calculation was made by combining the data available on the generation of drops by wind with data on the proportion of ice frozen from the collected water. The rate of ice accumulation on stationary structures was calculated using published data. The results were compared with icing measured on board ships. Although the general trend of this calculation indicated parallelism with the onboard measurements, the measured ice accumulation rate on ships needed a 5 to 8 m/s higher windspeed to correspond with the calculated rate for stationary structures.
    Type of Medium: Series available for loan
    Pages: ii, 13 Seiten , Illustrationen
    Series Statement: CRREL Report 84-12
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 65
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/11
    In: CRREL Report, 84-11
    Description / Table of Contents: Data obtained from two sets of data buoys either air-dropped or deployed by ship onto the Weddell Sea pack ice during the period from Dec 1978 to Nov 1980 are presented. The buoy data include position, pressure and temperature information and to date represent the most complete combined weather and pack ice drift records for the ice-covered Southern Ocean regions. The buoys tended to drift north initially and then to turn east generally between latitudes 62°S and 64°S. Buoy 1433 turned east farther south at approximately 67°S but at about the same time as buoy 0527, implying that the westerly wind belt was farther south than usual in 1979. The range of air pressures-from about 950 mb to about 1020 mb is typical of the circumpolar low pressure trough in the Southern Hemisphere. All buoys were equipped with an internal or compartment temperature sensor. The 1980 buoys also contained an external air temperature sensor in a ventilated, shielded can at 1-m height. Although differences of 10°C or more between recorded air and compartment temperatures are common, the correlation between the two measured temperatures is generally very good. The compartment temperatures are higher probably because the buoy is radiationally heated. We found that subtracting 3°C from the average daily compartment temperature yielded a good estimate of the average air temperature for any given day. This technique can be used to construct average daily air temperature records for the 1979 buoys which only contained the internal or compartment temperature sensor.
    Type of Medium: Series available for loan
    Pages: v, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 84-11
    Language: English
    Note: CONTENTS Abstract Preface Introduction Methods and instrumentation Results Drift tracks Pressure data Temperature data Discussion Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 66
    Call number: ZSP-201-84/9
    In: CRREL Report, 84-9
    Description / Table of Contents: This report presents the results of the first phase of a test program designed to obtain a comprehensive understanding of the mechanical properties of multi-year sea ice from the Alaskan Beaufort Sea. In Phase I, 222 constant-strain-rate uni-axial compression tests were performed on ice samples from ten multi-year pressure ridges to examine the magnitude and variation of ice strength within and between pressure ridges. A limited number of constant-strain-rate compression and tension tests, constant-load compression tests, and conventional triaxial tests were also performed on ice samples from a multi-year floe to provide preliminary data for developing ice yield criteria and constitutive laws for multi-year sea ice. Data are presented on the strength, failure strain, and modulus of multi-year sea ice under different loading conditions. The statistical variation of ice strength within and between pressure ridges is examined, as well as the effects of ice temperature, porosity, structure, strain rate and confining pressure on the mechanical properties of multi-year sea ice.
    Type of Medium: Series available for loan
    Pages: v, 107 Seiten , Illustrationen
    Series Statement: CRREL Report 84-9
    Language: English
    Note: CONTENTS Abstract Preface Introduction Field Sampling Site selection and description Ice sampling procedures Shipping and storage of ice samples Testing Techniques Multi-year Pressure Ridge Tests Ice description Sampling scheme and test variables Uniaxial compressive strength Residual compressive strength Failure strains Initial tangent modulus Statistical Variations in Ice Strength Differences in strength above and below level ice Sources of the variation in strength Shape of the strength histograms Multi-year Floe Ice Tests Ice description Uniaxial compressive strength Constant-load compression tests Constant-strain-rate tension tests Triaxial tests Conclusions Literature Cited Appendix A: Structural profile of a multi-year pressure ridge core Appendix B: Ridge uniaxial compression test data Appendix C: Structural profile of the continuous multi-year floe core Appendix D: Multi-year floe test data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 67
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/30
    In: CRREL Report, 83-30
    Description / Table of Contents: Ice sheets are formed and retained in several ways in nature, and an understanding of these factors is needed before most structures can be successfully applied. Many ice sheet retention structures float and are somewhat flexible; others are fixed and rigid or semirigid. An example of the former is the Lake Erie ice boom and of the latter, the Montreal ice control structure. Ice sheet retention technology is changing. The use of timber cribs is gradually but not totally giving way to sheet steel pilings and concrete cells. New structures and applications are being tried but with caution. Ice-hydraulic analyses are helpful in predicting the effects of structures and channel modifications on ice cover formation and retention. Often, varying the flow rate in a particular system at the proper time will make the difference between whether a structure will or will not retain ice. The structure, however, invariably adds reliability to the sheet ice retention process.
    Type of Medium: Series available for loan
    Pages: iv, 39 Seiten , Illustrationen , 1 Beilage
    Series Statement: CRREL Report 83-30
    Language: English
    Note: Contents Abstract Preface Introduction Natural ice sheets Choosing an ice control structure Flexible structures Ice booms Frazil collector lines Fence booms Rigid or semirigid structures Pier-mounted booms Stone groins Artificial islands Removable gravity structures Timber cribs Weirs Pilings and dolphins Structures built for other purposes Hydroelectric dams Wicket dams Light piers and towers Bridge piers Breakwaters Ice control not using Structures Channel improvements Ice sheet tying Ice sheet bridges Conclusions Literature cited Appendix A: Ice control structure
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 68
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/29
    In: CRREL Report, 83-29
    Description / Table of Contents: A literature review indicated that the effects or permafrost on streambank erodibility and stability are not yet understood because systematic and quantitative measurements are seriously lacking. Consequently, general controversy exists as to whether perennially frozen ground inhibits lateral erosion and bankline recession, or whether it increases bank recession rates. Perennially frozen streambanks erode because of modification of the bank's thermal regime by exposure to air and water, and because of various erosional processes. Factors that determine rates and locations of erosion include physical, thermal and structural properties of bank sediments, stream hydraulics and climate. Thermal and physical modification of streambanks may also induce accelerated erosion within permafrost terrain removed from the immediate river environment. Bankline or bluffline recession rates are highly variable, ranging from less than 1 m/year to over 30 m/year and, exceptionally, to over 60 m/year. Long-term observations of the physical and thermal erosion processes and systematic ground surveys and measurements of bankline-bluffline recession rates are needed.
    Type of Medium: Series available for loan
    Pages: iv, 26 Seiten , Illustrationen
    Series Statement: CRREL Report 83-29
    Language: English
    Note: CONTENTS Abstract Preface Introduction Stream bank erosional processes Permafrost and related factors Permafrost and erosion General Erosional processes Bank zone processes Bluff zone processes Factors affecting perm afrost erodibility Exposure to currents and wind waves Texture and stratigraphy Ice content, distribution and type Slope aspect Coriolis force Timing and depth of thaw Water level and temperature Vegetation Ice and snow cover Groundwater Rates and timing of erosion and recession Overall effects of permafrost Recommendations for research Literature cited Appendix A : Processes of stream bank modifications
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 69
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/31
    In: CRREL Report, 83-31
    Description / Table of Contents: A mathematical model is described that is used to determine the maximum ice conveyance capacity of a river channel. Based upon this model, computer programs were developed that enable the ice discharge to be calculated for steady-state flow conditions. For rivers that have uniform flow, the maximum ice-conveying capacity can be described with a simple function expressed in terms of the size of the ice fragments, channel geometry, and the flow of water in the river. For nonuniform flows, the computer program determines the elevation profile of the surface layer in addition to other flow characteristics, such as the velocity and surface concentration of the ice fragments. The location along this surface profile where the ice conveyance capacity becomes less than the upstream supply is determined and is considered to be the position where a surface ice jam or ice bridge will be formed.
    Type of Medium: Series available for loan
    Pages: iv, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 83-31
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Constitutive relationships Equations of motion Uniform flow Nonuniform flow Ice transport: Uniform flow Symmetric channel Asymmetric channel Ice transport: Nonuniform flow Further considerations Basis for model improvement Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 70
    Call number: ZSP-201-83/32
    In: CRREL Report, 83-32
    Description / Table of Contents: Ice forces on a bridge pier in the Ottauquechee River, in Quechee, Vermont, were measured by installing fourpanels-each capable of measuring forces in the normal and tangential direction - on both sides of a vertical V-shaped pier nose. The measured forces are presented for a short period during an ice run. After the ice run, the thickness and sizes of the ice floes were measured and the compressive strength of the ice was determined in the laboratory from the ice samples collected along the river banks. The water level measurements made at several locations along theriver are also presented for the period of the ice run.
    Type of Medium: Series available for loan
    Pages: ii, 8 Seiten , Illustrationen
    Series Statement: CRREL Report 83-32
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 71
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/4
    In: CRREL Report, 84-4
    Description / Table of Contents: Ice problems developed in the Sault Ste. Marie, Michigan, portion of the St. Marys River because of winter navigation. Passing ships and natural influences moved ice from Soo Harbor into Little Rapids Cut in sufficient quantities to jam, cause high water in the harbor, and prevent further ship passage. After physical model and engineering studies, two ice booms with a total span of 1375 ft (419 m) with a 250-ft (76-m) navigation opening between were installed at the head of Little Rapids Cut in 1975. A modest field study program on the booms was conducted for the ensuring four winters to determine ice and boom interaction and the effects of ship passages on the system. Forces on some anchors were recorded and supplemental data were taken by local personnel. Several reports have been written about the booms' early operations. This paper presents four-year summary of the main effects of the booms on ice and ship interaction and vice versa. Throughout the four winter seasons, the small quantities of ice lost over and between the booms were manageable. Ships usually passed through the boom without influencing the boom force levels, but at time they brought about large changes. One boom needed strengthening, and artificial islands were added for upstream ice stability. Coast Guard icebreakers were also a necessary part of winter navigation in this area.
    Type of Medium: Series available for loan
    Pages: iv, 18 Seiten , Illustrationen
    Series Statement: CRREL Report 84-4
    Language: English
    Note: CONTENTS Abstract Preface Introduction St. Marys River Ice problems Remedial measures Field studies Highlights, trends, and major findings Modifications to boom Maximum forces Ship traffic Characteristics Effect of boom forces Effect on ice Conclusion Literature cited Appendix A: Ice boom forces
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 72
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/6
    In: CRREL Report, 84-6
    Description / Table of Contents: An expression relating aerosol growth to cold environmental conditions was developed. This was accomplished by solving the diffusion equation with the method of Laplace transformation. The series solution was expressed in terms of the dimensionless parameters K (ratio of vapor density over droplet surface to droplet density), ω (ratio of environmental vapor density at time zero to vapor density over droplet surface), and dimensionless time τ (ratio of product of diffusion coefficient D and time t to square of initial radius of condensation nucleus). To take into account the variation of the vapor density over the surface of an acidic condensation nucleus due to the continuous dilution of the droplet, the solution was obtained by assuming various levels of constant vapor concentration. The final expression [R/R sub o - 1 = 2.4917 x 10 to the minus 18th power) exp(0.0737 θ) (P sub RHS/25) x (100-P sub RHS) τ to the 0.9890 powder] can be used to compute the value of R once the values of initial radius R sub o, relative humidity P sub RH, percent of relative humidity at the droplet surface P sub RHS, and environmental temperature θ are given.
    Type of Medium: Series available for loan
    Pages: vi, 28 Seiten , Illustrationen
    Series Statement: CRREL Report 84-6
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature General background The problem Method of solution Results and discussion Conclusions Literature cited Appendix: Evaluation of rn's in equation 25
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 73
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/5
    In: CRREL Report, 84-5
    Description / Table of Contents: Diatom species composition and relative abundances were determined for ice cores obtained from Weddell Sea pack ice during the October-November 1981 Weddell Polynya Expedition (WEPOLEX). Ice thickness and salinity indicate that the ice was less than one year old. The predominant ice type (70%) was frazil, which has the capacity to mechanically incorporate biological material through nucleation and scavenging. Diatoms were found throughout the length of the cores. Species showed down-core fluctuations in abundance that appeared to be correlated with changes in ice type. Pennate forms were more abundant than centrics, the average ratio being 16:1. Diatom frustules with intact organic material were more abundant (5 billion cells/liter). Differences in species abundances are attributed initially to incorporation of algal cells from a temporally changing water column and subsequently to diatom reproduction within the ice. Scanning electron micrographs illustrating the morphologic characteristics of the predominant species are included.
    Type of Medium: Series available for loan
    Pages: iv, 46 Seiten , Illustrationen
    Series Statement: CRREL Report 84-5
    Language: English
    Note: Contents Abstract Preface Introduction Materials and methods Results Discussion Conclusions Literature cited Appendix A: Taxonomic terms Appendix B: Differences in species composition and abundance in duplicate samples examined under optical and inverted light microscopes Appendix C: Morphologic descriptions and SEM micrographs
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 74
    Call number: ZSP-201-83/21
    In: CRREL Report, 83-21
    Description / Table of Contents: The probability density function of the gouge depths into the sediment is represented by a simple negative exponential over four decades of gouge frequency. The exceedance probability function is, therefore, e to the -lambda d, where d is the gouge depth in meters and lambda is a constant. The value of lambda shows a general decrease with increasing water depth, from 9/m in shallow water to less than 3/m in water 30 to 35 m deep. The deepest gouge observed was 3.6 m, from a sample of 20,354 gouges that have depths greater than or equal to 0.2 m. The dominant gouge orientations are usually unimodal and reasonably clustered, with the most frequent alignments roughly parallel to the general trend to the coastline. The value of N(bar) sub 1, the mean number of gouges (deeper than 0.2 m) per kilometer measured normal to the trend of the gouges, varies from 0.2 for protected lagoons to 80 in water between 20 and 38 m deep in unprotected offshore regions. The distribution of the spacings between gouges as measured along a sampling track is a negative exponential. The form of the frequency distribution of N sub 1 varies with water depth and is exponential for lagoons and shallow offshore areas, previously skewed for 10 to 20 m depths off the barrier islands, and near-normal for deeper water. As a Poisson distribution gives a reasonable fit to the N sub 1 distributions for all water depths, it is suggested that gouging can be taken as approximating a Poisson process in both space and time. The distributions of the largest values per kilometer of gouge depths, gouge widths, and the heights of the lateral embankment of sediments plowed from the gouges are also investigated.
    Type of Medium: Series available for loan
    Pages: 40 Seiten , Illustrationen, 1 Karte
    Series Statement: CRREL Report 83-21
    Language: English
    Note: CONTENTS Abstract Preface Introduction Background and environmental setting Data collection and terminology Data analysis Gouge depths Gouge orientation Gouge frequency Extreme value analysis Applications to offshore design Gouge depth Extreme value statistics Burial depths Conclusion Literature cited Appendix A: Detailed bathymetric map of the Alaskan portion of the Beaufort Sea
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 75
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/8
    In: CRREL Report, 84-8
    Description / Table of Contents: This report describes the equipment and procedures that were used for acquiring, preparing and testing samples of multi-year sea ice. Techniques and procedures are discussed for testing ice samples in compression and tension at constant strain rates and constant loads, as well as in a conventional triaxial cell. A detailed account is given of the application and measurement of forces and dispiacements on the ice test specimens under these different loading conditions.
    Type of Medium: Series available for loan
    Pages: iv, 43 Seiten , Illustrationen
    Series Statement: CRREL Report 84-8
    Language: English
    Note: CONTENTS Abstract Preface Introduction Test material and test specimens Test material Required dimensions for test specimens Acquisition and preparation of specimens Field core sampling Specimen preparation in the laboratory Application of forces and displacements to uniaxial specimens Compression Tension Squareness imperfections Loading devices Universal testing machine Gas actuator for constant load Weight-and-pulley system for constant tension Equipment for triaxial tests Measurement of force and displacement Force Displacement Readouts and recorders Literature cited Appendix A: Phenolic-resin end caps Appendix B: Compliant platens Appendix C: Theoretical factor for converting overall strain to gauge-length strain indumbbell specimens Appci dix D: Items developed but not used in Phase I Appendix E: Use of the Brazil test
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 76
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/26
    In: CRREL Report, 84-26
    Description / Table of Contents: Observations of shore ice pile-up and ride-up along the Alaska Beaufort Sea coast in 1983 and 1984 are presented. New information on historical accounts of onshore ice movement, uncovered since publication of Part I in this series, is reported. An account is given of ice overtopping a concrete caisson exploration island in the Canadian Beaufort Sea.
    Type of Medium: Series available for loan
    Pages: iii, 33 Seiten , Illustrationen
    Series Statement: CRREL Report 84-26
    Language: English
    Note: CONTENTS Abstract Preface Introduction Observations Discussion Literature cited Appendix A: Site location maps
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 77
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/33
    In: CRREL Report, 84-33
    Description / Table of Contents: A small-scale experimental study was conducted to characterize the magnitude and nature of ice forces during continuous crushing of ice against a rigid, vertical, cylindrical structure. The diameter of the structure was varied from 50 to 500 mm, the relative velocity from 10 to 210 mm/s, and the ice thickness from 50 to 80 mm. The ice tended to fail repetitively, with the frequency of failure termed the characteristic frequency. The characteristic frequency varied linearly with velocity and to a small extent with structure diameter. The size of the damage zone was 10 to 50% of the ice thickness, with an average value of 30%. The maximum and mean normalized ice forces were strongly dependent on the aspect ratio (structure diameter/ice thickness). The forces increased significantly with decreasing aspect ratio, but were constant for large aspect ratios. The maximum normalized forces appeared to be independent of strain rate. The effect of velocity on the normalized ice forces depended on structure diameter. The mean effective pressure or specific energy of ice crushing depended on both aspect ratio and ice-structure relative velocity. The energy required to crush the ice for the one failure cycle was obtained from the ice force records for each test, and was compared to the energy calculated from an idealized sawtooth shape for the force record, the maximum force, velocity and characteristic frequency data. Originator - supplied keywords included: Cold regions, Cold regions construction, Cylindrical test structures, Ice, Ice crushing, Ice forces, and Test facilities.
    Type of Medium: Series available for loan
    Pages: vi, 47 Seiten , Illustrationen
    Series Statement: CRREL Report 84-33
    Language: English
    Note: Contents Abstract Preface Nomenclature Introduction Test objectives Experimental setup and procedures Facilities Test fixture Data acquisiton system Ice sheets Measurement of ice properties Daily test summary Experimental results and discussion Observations Ice force records Frequency of ice force variations Discussion Maximum crushing forces Mean effective pressure or specific energy of ice in crushing Failure energy of ice Ratio of maximum force to mean force Summary and conclusions Literature cited Appendix A: Data for continuous crushing tests
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 78
    Call number: ZSP-201-76/24
    In: CRREL Report, 76-24
    Description / Table of Contents: Chemical analysis of surface snows and deeper ice core samples from Milcent, Greenland, indicates a marine origin for Na and Cl and a terrestrial origin for Al, Mn and V. Pre-1900 enrichment factors, based on average crustal composition, are high for Zn and Hg and appear to be related to their volatility. A comparison of pre-1900 and 1971-1973 concentrations of V and Hg shows no decided increase from industrial production; however, the abundance of Zn (relative to Al) increased three-fold during this time period. The chemical composition of ancient ice is extremely useful in interpreting modern aerosols.
    Type of Medium: Series available for loan
    Pages: ii, 6 Seiten , Illustrationen
    Series Statement: CRREL Report 76-24
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 79
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/25
    In: CRREL Report, 76-25
    Description / Table of Contents: The primary objective of this investigation was to compile baseline information pertaining to the ocean circulation, especially the extent and patterns of tidal currents and tidal flushing, in Cook Inlet, Alaska, utilizing aircraft and satellite imagery with corroborative ground truth data. LANDSAT-1 and NOAA-2 and -3 imagery provided repetitive, synoptic views of surface currents, water mass migration and sediment distribution during different seasons and tides. Color, color infrared and thermal infrared imagery acquired on 22 July 1972 with the NASA NP-3A aircraft were used to analyze currents, mixing patterns and sediment dispersion in selected areas. Temperature(C), salinity (0/00) and suspended sediment concentration (mg/l) data and hand-held photography were utilized as ground truth information in the interpretation of the aircraft and satellite imagery. Coriolis effect, semidiurnal tides and the Alaska current govern the estuary circulation. Clear, oceanic water enters the inlet on the southeast during flood tide, progresses northward along the east shore with minor lateral mixing, and remains a distinct water mass to the latitude of Kasilof-Ninilchik. South of the forelands, mixing with turbid inlet water becomes extensive. Turbid water moves south primarily along the north shore during ebb tide and a shear zone between the two water masses forms in mid-inlet south of Kalgin Island. Currents adjacent to and north of the forelands are complicated by tidal action, coastal configuration and bottom effects. Turbulence is greatest throughout the water column along the south shore and stratification is more pronounced in Kamishak and Kachemak Bays, especially when fresh water runoff is high.
    Type of Medium: Series available for loan
    Pages: ix, 92 Seiten , Illustrationen
    Series Statement: CRREL Report 76-25
    Language: English
    Note: CONTENTS Abstract Preface Summary Conversion factors: U.S. customary to metric (SI) units of measurement. Introduction Background Objectives Project history Approach Aircraft imagery LANDSAT-1 imagery NOAA-2 and -3 satellite imagery Ground truth data Imagery and ground truth data analysis Physical and cultural setting Geography Geology Climate Hydrology Local industry and population density Sources of estuarine pollution Results and discussion Coastal configuration Bathymetry Tides Asymmetry of tidal flow/duration across inlet Suspended sediment distribution and circulation Sea ice Tidal flushing characteristics Summary and conclusions Applications Recommendations Literature cited Appendix A. RS-14 infrared scanner imagery
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 80
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/28
    In: CRREL Report, 76-28
    Description / Table of Contents: Fourier transforms of selected ground-motion time histories from five underground high-explosive and nuclear detonations are used to define the transmission properties (Transfer functions) of three rock types. Absorption, a measure of a rock's energy dissipating characteristics, is expressed for each of the tests as a function of the frequency of transmission. Dispersion results from a variation in transmission velocity with frequency and is described for each test by a phase velocity spectrum. The transmission properties from one of the sites are used to predict a ground-motion time history at that site from another nuclear event. The potential use of Fourier techniques to make ground-motion predictions and to measure in-situ material properties is discussed.
    Type of Medium: Series available for loan
    Pages: vi, 91 Seiten , Illustrationen
    Series Statement: CRREL Report 76-28
    Language: English
    Note: Contents Section I: Introduction Section II: Analytical procedures 1. Fourier transforms 2. Basic transform properties 3. Transform techniques 4. The transfer function Section II: Parameter studies and program evaluations 1. Analytical parameter study 2. I-TRAIN evaluation 3. S-TRAIN evaluation Section IV: Data 1. DATEX I 2. DATEX II 3. STARMET 4. MINERAL LODE 5. HARD HAT and PILEDRIVER Section V: Analysis of transformed data 1. Absorption 2. Dispersion 3. Transfer function Section VI: Fourier synthesis Section VII: Discussion Literature cited Appendix A: The Fourier integral and series Appendix B: Subroutine FOURT used in analysis Appendix C: I-TRAIN and S-TRAIN programs
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 81
    Call number: ZSP-201-76/31
    In: CRREL Report, 76-31
    Description / Table of Contents: Sections in the Connecticut River where ice jam potential is high were identified through the use of low-altitude black and white photographs taken during low-flow, ice-free conditions. The hydraulics and mechanics of ice jam initiation were investigated in the river reach where these sections were identified. Certain areas were found in the river that had a high susceptibility to ice clogging, but this high potential decreased with increasing discharge because of the improved surface conveyance of the ice through the reach. The stability of ice floes was established along the channel, but the floes generally became unstable as the flow increased. This was calculated by using a Froude number criterion. Grounding locations for ice became evident when the critical Froude number was zero for a given thickness and water depth. No single factor was determined to be responsible for initiating the ice jams in the Connecticut River at Windsor. Apparently there existed a multitude of interacting conditions: surface constrictions, possible high backwater conditions from the Brattleboro Dam, a solid ice cover in the backwater of the Brattleboro Dam that prevented ice transport from the Windsor area, deep pools followed by shallow depth sections upstream of bridge piers, a greater ice thickness accumulation of fragmented floes than would result if a uniform cover could be established in the same reach, and the diurnal fluctuation of river stage casued by the release of water at Wilder Dam.
    Type of Medium: Series available for loan
    Pages: vi, 39 Seiten , Illustrationen
    Series Statement: CRREL Report 76-31
    Language: English
    Note: CONTENTS Abstract Preface Summary Conversion factors: U.S. customary to metric units of measurement Introduction Testsite Aerial photography Channel morphology — Interpretation of aerial photographs Ground surveys Hydraulic analysis Analysis of ice jam locations Winter field observations Conclusions Literature cited Appendix: Locations and plots of cross sections from Sumner Falls to Chase Island, Connecticut River
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 82
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/34
    In: CRREL Report, 76-34
    Description / Table of Contents: Some physical characteristics of two grounded floebergs (fragments of multi-year pressure ridges) near Prudhoe Bay, Alaska, are described. Cross-sectional profiles of the sails and keels of both floebergs were obtained. A sail to keel ratio of 1 to 3.38 obtained with one floeberg was found to be in good agreement with previous investigations. A survey of the sea floor for evidence of scoring induced during grounding yielded a maximum depth of gouging of 1.1m. Additional studies included investigations of the internal structure of the floebergs, and a brief examination of the organic and sedimentary debris found entrained within the floebergs. The grounding of ice on the continental shelves of the Arctic is of considerable interest to those concerned with the development and impact of development of these continental shelves. The field study reported here provides information useful in assessing the nature and characteristics of interactions between floebergs and the sea bed on which they are grounded.
    Type of Medium: Series available for loan
    Pages: iii, 13 Seiten , Illustrationen
    Series Statement: CRREL Report 76-34
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 83
    Call number: ZSP-201-76/33
    In: CRREL Report, 76-33
    In: Detecting structural heat losses with mobile infrared thermography / R.H. Munis, S.J. Marshall and M.A. Bush, Part IV
    Description / Table of Contents: During the winter of 1973-74 a mobile infrared thermography system was used to survey campus buildings at Dartmouth College, Hanover, New Hampshire. Both qualitative and quantitative data are presented regarding heat flow through a small area of a wall of one brick dormitory building before and after installation of aluminum reflectors between radiators and the wall. These data were used to estimate annual cost savings for 22 buildings of similar construction having aluminum reflectors installed behind 1100 radiators. The data were then compared with the actual savings which were calculated from condensate meter data. The discrepancy between estimated and actual annual cost savings is explained in detail along with all assumptions required for these calculations.
    Type of Medium: Series available for loan
    Pages: iii, 14 Seiten , Illustrationen
    Series Statement: CRREL Report 76-33
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 84
    Call number: ZSP-201-76/35
    In: CRREL Report, 76-35
    Description / Table of Contents: Crystalline textures and fabrics of ice cores from the 2164-m-thick ice sheet at Byrd Station, Antarctica, reveal the existence of an anisotropic ice sheet. A gradual but persistent increase in the c-axis preferred orientation of the ice crystals was observed between the surface and 1200m. This progressive growth of an oriented crystal fabric is accompanied by a 20-fold increase in crystal sized between 56 and 600m, followed by virtually no change in crystal size between 6000 and 1200m. A broad vertical clustering of c-axes develops by 1200m. Between 1200 and 1300 m the structure transforms into a fine-grained mosaic of crystals with their basal glide planes now oriented substantially within the horizontal. This highly oriented fine-grained structure, which persists to 1800m, is compatible only with a strong horizontal shear deformation in this part of the ice sheet. Rapid transformation from single- to multiple-maximum fabrics occurs below 1800m. This transformation, accompanied by the growth of very large crystals, is attributed to the overriding effect of relatively high temperatures in the bottom layers of old ice at Byrd Station rather than to a significant decrease in stress. The zone of single-maximum fabrics between 1200 and 1800 m also contains numerous layers of volcanic dust. Fabrics of the very fine-grained ice associated with these dust bands indicate the bands are actively associated with shearing in the ice sheet. Some slipping of ice along the bedrock seems likely at Byrd Station, since the basal ice is at the pressure melting point and liquid water is known to exist at the ice/rock interface.
    Type of Medium: Series available for loan
    Pages: v, 30 Seiten , Illustrationen
    Series Statement: CRREL Report 76-35
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 85
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/47
    In: CRREL Report, 76-47
    Description / Table of Contents: This report describes two mechanical ice-cutting systems for the removal of ice collars at the high pool level on the Poe Lock of the St. Marys Falls Canal at Sault Ste. Marie, Michigan. One system was a narrow-kerf (3.25-in.-wide) coal-cutting chain saw mounted on a bar, driven by a 65-hp wheeled trencher. The other system was a lumber-cutting chain saw mounted on a bar, driven by a 30-hp wheeled soil trencher which cut a 0.56-in.-wide kerf. The lumber-cutting saw's bar was too flexible and the desired cutting traverse speed was not met. The coal-cutting saw cut 6-ft-deep ice collars at traverse speeds of up to 10 ft/min and is acceptable. With a few modifications, the coal-cutting saw would be operational.
    Type of Medium: Series available for loan
    Pages: iii, 20 Seiten , Illustrationen
    Series Statement: CRREL Report 76-47
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 86
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/38
    In: CRREL Report, 76-38
    Description / Table of Contents: Current methods for evaluation of the moisture absorption of plastic insulations (ASTM-C-272-53 and ASTM-C-355-64) due to vapor pressure gradients or immersion rely on short time periods to predict long term performance. This procedure may not provide accurate information on performance since in practice insulations may absorb more moisture than these tests indicate. A series of tests were conducted on extruded polystyrene roof insulation that had been in place, exposed to environmental moisture and pressure gradients, for a maximum of 36 months. Results indicate that moisture absorption of 1.5% by volume can be expected in the field.
    Type of Medium: Series available for loan
    Pages: iv, 21 Seiten , Illustrationen
    Series Statement: CRREL Report 76-38
    Language: English
    Note: CONTENTS Abstract Preface Conversion factors: U.S. customary to metric (SI) units of measurement Introduction Principal features of a protected membrane roof system Reported advantages of a protected membrane roof system Study sites Stevens Hall, University of Alaska, Fairbanks Building 41 5, University of Alaska, Fairbanks Building 1053, Ft. Wainwright, Alaska Gruening Building, University of Alaska, Fairbanks Consortium Library and K Building, University of Alaska, Anchorage CRREL Laboratory, Hanover, New Hampshire Resources Building, University of Alaska, Fairbanks Insulation properties Sampling Results Bulksamples Sliced samples Conclusions and recommendations Literature cited Appendix A. Moisture contents Appendix B. Photographs
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 87
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/40
    In: CRREL Report, 76-40
    Description / Table of Contents: Several original methods were developed to photograph artifacts in transparent materials such as ice. The artifacts, occurring in the surface, bulk, and interface, were generally 0.01 mm to 70 mm in size. Sample preparation, illumination, focusing and other technical problems are discussed in detail. Several sample photographs are included.
    Type of Medium: Series available for loan
    Pages: v, 36 Seiten , Illustrationen
    Series Statement: CRREL Report 76-40
    Language: English
    Note: CONTENTS Abstract Preface Summary Introduction Equipment The microscope system The camera system Tools for preparation of sample Laboratory procedure Categorizing artifact Choosing setup Preparing sample llluminating sample Photographing artifact Results Literature cited Selected bibliography Appendix. Reference information for photomacrographic and photo-micrographic applications
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 88
    Call number: ZSP-980-89 ; ZSP-980-89(2. Ex.)
    In: ZfI-Mitteilungen ; 89, Nr. 89
    Type of Medium: Series available for loan
    Pages: 132 S. , Ill., graph. Darst., Kt.
    ISSN: 0323-8776
    Series Statement: ZfI-Mitteilungen 89
    Language: English
    Note: Contents: Preface. - Tritium in Antarctic precipitation - information on global distribution / D. Hebert. - On the physical geography of the Schirmacher Oasis (East Antarctica, Dronning Maud Land) / W. Richter. - Investigation of Deuterium concentration relations between atmospheric water vapour and precipitations in the Schirmacher Oasis, East Antarctica / P. Kowski. - Isotope-hydrological and hydrochemical characterization of lakes in the Schirmacher Oasis (East Antarctica) / W. Richter, U. Wand, G. Strauch, P. Kowski, W. Kurze. - Isotope-hydrological and hydrochemical studies of the interior Antarctic lake "Untersee" in the Wohlthat Massif, Dronning Maud Land, East Antarctica / W.-D. Hermichen, M. Crelle, P. Kowski, W. Kurze, U. Wand. - The isotope-glaciological situation in the surroundings of the Schirmacher Oasis/Dronning Maud Land - a first overview / W.-D. Hermichen, P. Kowski, G. Strauch. - Radiocarbon dating of breeding places of petrels in the Antarctic / A. Hiller, U. Wand. - K - Ar dating of basalt dykes in the Schirmacher Oasis, Dronning Maud Land, East Antarctica / G. Kaiser, U. Wand.
    Location: AWI Archive
    Location: AWI Archive
    Branch Library: AWI Library
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 89
    Call number: ZSP-201-83/22
    In: CRREL Report, 83-22
    Description / Table of Contents: A new experimental method for measuring the soil-water diffusivity of frozen soil under isothermal conditions is introduced. The theoretical justification of the method is presented and the feasibility of the method is demonstrated by experiments conducted using marine-deposited clay. The measured values of the soil-water diffusivity are found comparable to reported experimental data.
    Type of Medium: Series available for loan
    Pages: 13 Seiten , Illustrationen
    Series Statement: CRREL Report 83-22
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 90
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/23
    In: CRREL Report, 83-23
    Description / Table of Contents: The problems associated with measuring stresses in ice are reviewed. Theory and laboratory test results are then presented for a stiff cylindrical sensor made of steel that is designed to measure ice stresses in a biaxial stress field. Loading tests on freshwater and saline ice blocks containing the biaxial ice stress sensor indicate that the sensor has a resolution of 20 kPa and an accuracy of better than 15% under a variety of uniaxial and biaxial loading conditions. Principal stress directions can also be determined within 5 degrees. The biaxial ice stress sensor is not significantly affected by variations in the ice elastic modulus, ice creep or differential thermal expansion between the ice and gauge. The sensor also has a low temperature sensitivity (5 kPa/deg C).
    Type of Medium: Series available for loan
    Pages: 38 Seiten , Illustrationen
    Series Statement: CRREL Report 83-23
    Language: English
    Note: CONTENTS Abstract Preface Introduction Previous work Stress measurements Design considerations Stress sensors Biaxial ice stress sensor Biaxial stress sensor theory Gauge deformation Stresses associated with cylindrical sensors Determination of ice stresses Gauge calibration Evaluation of the biaxial ice stress sensor Temperature sensitivity Biaxial loading test equipment Biaxial loading test results Differential thermal expansion Long-term drift Discussion of test results Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 91
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/11
    In: CRREL Report, 83-11
    Description / Table of Contents: Investigations of ground radar performance over thawed and seasonally frozen silts, and sands and gravels containing artificial and natural reflectors were carried out in Alaska. The radar emitted 5-10 ns pulses, the center frequency of which was approximately 150 MHz. The artificial reflectors were metal sheets and discs and the natural reflectors were the groundwater table and interfaces between frozen and thawed material. The water table was profiled at three sites where the subsurface material was coarse-grained alluvium. Dielectric constants of 16 to 18 were measured for the thawed silts, 6 to 7 for the frozen silts and 3 to 9 for the sands and gravels. Signal penetration in the thawed high moisture content silts may be achieved only by use of a lower frequency radar, whereas in the sands and gravels greater depths may be detected with more sophisticated signal processing.
    Type of Medium: Series available for loan
    Pages: 16 Seiten , Illustrationen
    Series Statement: CRREL Report 83-11
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 92
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/25
    In: CRREL Report, 83-25
    Description / Table of Contents: Ice action on two cylindrical and conical structures, located side by side, was investigated in a small-scale experimental study to determine the interference on the ice forces generated during ice-structure interaction. The proximity of the two structures changes the mode of ice failure, the magnitude and direction of ice forces on the individual structure, and the dominant frequency of ice force variations. Interference effects were determined by comparing the experimental results of tests at different structure spacings.
    Type of Medium: Series available for loan
    Pages: 42 Seiten , Illustrationen
    Series Statement: CRREL Report 83-25
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Experimental setup and procedure Results and discussion Cylindrical structures Conical structures Conclusions Literature cited Appendix A: Relationship between flexural strength and in-situ unconfined compressive strength Appendix B: Test data
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 93
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/17
    In: CRREL Report, 83-17
    Description / Table of Contents: A sea ice model was applied to the East Greenland Sea to examine a 60-day ice advance period beginning 1 October 1979. This investigation compares model results using driving geostrophic wind fields derived from three sources. Winds calculated from sea-level pressures obtained from the National Weather Service's operational analysis system resulted in strong velocities concentrated in a narrow band adjacent to the Greenland coast, with moderate velocities elsewhere. The model showed excessive ice transport and thickness build-ups in the coastal region. The extreme pressure gradient parallel to the coast resulted partially from a pressure reduction procedure that was applied to the terrain-following sigma coordinate system to obtain sea-level pressures. Additional sea-level pressure fields were obtained from an independent optimal interpolation analysis that merged FGGE buoys drifting in the Arctic basin with high latitude land stations and from manual digitization of the NWS hand-analyzed Northern Hemisphere Surface Charts. Modeling results using winds from both of these fields agreed favorably.
    Type of Medium: Series available for loan
    Pages: 19 Seiten , Illustrationen
    Series Statement: CRREL Report 83-17
    Language: English
    Note: CONTENTS Abstract Preface Introduction Description of study Model results The problem Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 94
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/26
    In: CRREL Report, 83-26
    Description / Table of Contents: Ice accreted on high-speed rotors operating in supercooled fog can be thrown off by centrifugal force, creating severe unbalance and dangerous projectiles. A simple force balance analysis indicates that the strength of accreted ice and its adhesive strength can be obtained by measuring the thickness of the accretion, the location of the separation, the rotor speed, and the density. Such an analysis was applied to field and laboratory observations of self-shedding events. The results agree reasonably well with other observations.
    Type of Medium: Series available for loan
    Pages: 13 Seiten , Illustrationen
    Series Statement: CRREL Report 83-26
    Language: English
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 95
    Call number: ZSP-201-83/24
    In: CRREL Report, 83-24
    Description / Table of Contents: Secondary recovery of oil at Prudhoe Bay, Alaska, will involve transporting large quantities of seawater in elevated pipelines across tundra for injection into oil-bearing rock strata. The possibility of a pipeline rupture raises questions concerning the effects of seawater on tundra vegetation and soils. To evaluate the relative sensitivities of different plant communities to seawater, eight sites representing the range of vegetation types along the pipeline route were treated with single, saturating applications of seawater during the summer of 1980. Within a month of the treatment 30 of 37 taxa of shrubs and forbs in the experimental plots developed clear symptoms of stress, while none of the 14 graminoid taxa showed apparent adverse affects. Live vascular plant cover was thus reduced by 89 and 91% in the two dry sites and by 54, 74 and 83% in the three moist sites, respectively. Live(green) bryophyte cover was markedly reduced in the moist experimental sites in 1981. Bryophytes in all but one of the wet-site experimental plots were apparently unaffected by the seawater treatment. Two species of foliose lichens treated with seawater showed marked deterioration in 1981. All other lichen taxa were apparently unaffected by the seawater treatment. The absorption and retention of salts by the soil is inversely related to the soil moisture regime. In the wet sites, conductivities approached prespill levels within about 30 days. In such sites, spills at the experimental volumes are quickly diluted and the salts flushed from the soil. In the dry sites, on the other hand, salts are retained in the soil, apparently concentrating at or near the seasonal thaw line.
    Type of Medium: Series available for loan
    Pages: 43 Seiten , Illustrationen
    Series Statement: CRREL Report 83-24
    Language: English
    Note: CONTENTS Abstract Preface Introduction Methods Site selection and preparation Prespill assessment Seawater application Postspill assessment Enzyme assay and analysis of soil flora Results and discussion Soil-solution conductivities Vascular plant response Cryptogam response Site factors and plant response Soil flora and extracellular soil enzymes Limitations of this study Summary and conclusions Literature cited Appendix: Plant taxa included in this study
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 96
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/3
    In: CRREL Report, 84-3
    Description / Table of Contents: The results of resistance tests in level ice and broken ice channels are presented for two models of the WTGB 140-fticebreaker at scales of 1:10 and 1:24, respectively. No scale effect on the resistance in level ice could be detected between the two models. From the test results an empirical predictor equation for the full scale ice resistance is derived. Predicted resistance is compared against, and found to be 25 to 40% larger than, available full-scale values estimated from thrust measurements during full-scale trials of the Great Lakes icebreaker Katmai Bay.
    Type of Medium: Series available for loan
    Pages: v, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 84-3
    Language: English
    Note: COTENTS Abstract Preface Nomenclature Introduction Model characteristics and test conditions Ice-hull coefficient of friction Measurements of ice properties Experimental procedures Data acquisition system Test program and procedures for 1:10 model Test program and procedures for 1:24 model Analysis of test results Comparison of test results between 1:10 and 1:24 models Analysis of tests in broken or brash-filled ice channels Analysis of tests in level ice Full-scale prediction of level ice resistance Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 97
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-84/2
    In: CRREL Report, 84-2
    Description / Table of Contents: Investigations of the in situ complex dielectric constant of sea ice were made using time-domain spectroscopy. It was found that (1) for sea ice with a preferred horizontal crystal c-axis alignment, the anisotropy of polarizing properties of the ice increased with depth, (2) brine inclusion conductivity increased with decreasing temperature down to about -8 C, at which point the conductivity decreased with decreasing temperature, (3) the DC conductivity of sea ice increased with increasing brine volume, (4) the real part of the complex dielectric constant is strongly dependent upon brine volume but less dependent upon the brine inclusion orientation, (5) the imaginary part of the complex dielectric constant was strongly dependent upon brine inclusion orientation but much less dependent upon brine volume. Because the electromagnetic (EM) properties of sea ice are dependent upon the physical state of the ice, which is continually changing, it appears that only trends in the relationships between the EM properties of natural sea ice and its brine volume and brine inclusion microstructure can be established.
    Type of Medium: Series available for loan
    Pages: vi, 38 Seiten , Illustrationen , 1 Beilage
    Series Statement: CRREL Report 84-2
    Language: English
    Note: CONTENTS Abstract Preface Nomenclature Introduction Dielectric properties of sea ice Time-domain spectroscopy measurement Laboratory measurements Field measurements Analysis of ladder data Conductivity of brine and sea ice Complex dielectric constant of brine and sea ice Discussion and conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 98
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-83/33
    In: CRREL Report, 83-33
    Description / Table of Contents: A thermodynamic model has been developed that for the first time describes the entire creep process, including primary, secondary, and tertiary creep, and failure for both constant stress (CSR) tests (σ= const.) and constant strain rate (CSR) tests (ϵ = const.), in the form of a unified constitutive equation and unified failure criteria. Deformation and failure areconsidered as a single thermoactivated process in which the dominant role belongs to the change of entropy. Failure occurs when the entropy change is zero. At that moment the strain rates in CS tests reach the minima and stress in CSR tests reaches the maximum (peak) values. Families of creep (ϵ vs τ) and stress-strain (σ vs ϵ) curves, obtained from uni-axial compression CS and CSR tests of frozen soil, respectively (both presented in dimensionless coordinates), are plotted as straight lines and are superposed, confirming the unity of the deformation and failure process and the validity of the model. A method is developed for determining the parameters of the model, so that creep deformation and the stress-strain relationship of ductile materials such as soils can be predicted based upon information obtained from either type of test.
    Type of Medium: Series available for loan
    Pages: v, 25 Seiten , Illustrationen
    Series Statement: CRREL Report 83-33
    Language: English
    Note: CONTENTS Abstract Nomenclature Introduction Principal relationships Constitutive equation Failure criteria Secondary creep: Flow equations Creep at constant stress (σ = Const.) Creep model Creep strain (σ = Const.) Creep at constant strain rate (ϵ = Const.) Stress-strain relationship Stress/strain/strain rate at failure Test data Preliminary analysis Constant stress tests (σ = Const.) Constant strain rate tests (ϵ = Const.) The principle of superposition Thermodynamic equation of creep Conclusions Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 99
    Call number: ZSP-980-69
    In: 2nd Working Meeting "Radioisotope Application and Radiation Processing in Industry", Part 1, 1 to 48
    In: ZfI-Mitteilungen, Nr. 69
    Type of Medium: Series available for loan
    Pages: 480 Seiten , Illustrationen
    ISSN: 0323-8776
    Series Statement: ZfI-Mitteilungen 69
    Language: English
    Note: Contents of Part 1 S. Niese: Reactor neutron activation analysis of industrial materials R.P. Gardner, K. Verghese: Use of Monte Carlo methods in the calibration and design optimization of radiation gauges and analyzers R. Otto, P. Hecht: On labelling with generator nuclides M. Richter: Measurement of residence time distribution with radiotracers using periodic pseudo-random binary signal sequences J. Schoen: A computer code for tracer experiment data analysis H.-H. Deicke, J. Flachowsky, K.-P. Rudolph, N. Beiermann: Transit time measurements in technical plants by using a multichannel analyzer H. Bohne: Measurements of air currents L. Baranyai: Tracer study of simultaneous homogenization and segregation in industrial equipments N. Balabanov, N. Kapitanova: Application of radiotracer method for study of glass furnaces J. Thẏn: Evaluation of mixing particulate solids by radiotracer method H.-G. Koennecke, P. Kulicke, E. Antal, J. Jentzsch, H. Michael: Investigation of the mixing efficiency of kneading machines using radionuclides A.G. Belov, V.E. Zhuchko, Yu.S. Zamyatnin, Yu.G. Teterev, D. Rubio: Development of the nuclear-physical methods of analysis at the laboratory of nuclear reactions of the JINR R. Burek, K. Wojcik: A new concept for measuring of free moisture in solid materials N. Bachvarov, I. Georgiev, E. Manolov, P. Pavlov, H. Shukov, K. Tropolov: Process control system for fresh concrete preparation H. Baumbach: Investigation of moisture migration in the concrete of a special test construction under simulated load conditions A. Petrov, A. Sreno, H. Hristov, P. Penev, G. Georgiev: Beta-ray backscatter instruments for coating thickness measurements in electronic and electrotechnical industry W. Stuchlik, H. Kupsch: Radioactive level indicator for bulk materials in containers with calculation of the residual volume H. Baumbach, K. Fichtler, R. Melzer, D. Tietze, H. Ullrich: The determination of density variation in radiation protective walls of concrete by means of Bremsstrahlung of 1o MeV from linear accelerator D. Avramov: Modernized versions of mobile NDT laboratories V. Friedrich: Examples for radioisotope application in environment protection St. Szpilowski: Prediction of mixing length for transport of effluent in rivers A. Owczarczyk: The localization of the leakages through the dams and bottoms of large water reservoires W. Listwan: Progress in leak detection methods for underground pipelines and tanks J. Starẏ, A. Zeman, B. Havlik: Radionuclides in the investigation of the cumulation of toxic elements on alga and fish W. Richter, D. Kahl, H.-J. Grosse, F. Gleisberg: The use of an AIG-analyzer for the investigation of SO2-dispersion problems R. Goeldner, H.-J. Grosse, F. Gleisberg: Possibilities of the development of improved smoke detectors J. Adler, H.-R. Doering, H.-J. Grosse, F. Gleisberg: The use of the AIG in microelectronics P. Popp, R. Fahnert, S. Mothes, G. Oppermann: Methods for the determination of toxic compounds at work places H.-R. Doering. H.-J. Grosse: The detection of halocarbons by means of the aerosol ionization gas analyzer (AIG) E, Jaworska, I. Kaluska, G. Strzelczak: Crosslinking and free radical decay reactions in irradiated polyethylene in presence of additives J. Zahalka: Radiation modified materials in machine engineering W. Bobeth, R. Hanke, A. Heger, J. Morgenstern, H. Paessler: Technological aspects of planar structurizing on woven and knitted fabrics by localized radiation induced grafting B. Ihme, E. Maeder, A. Mally: Problems in the development of high-energy radiation processing of woven and knitted fabrics S. Nikolov. P, Panayotov, V. Diakova, M. Nikolova: Radiation modification of timber in people's republic of Bulgaria H. Dahlhelm. G. Matejko. G. Huebner: Experiments on sprouting inhibition in onions J. Thẏn: Process analysis with nuclear technique A. Merz: Axial dispersion and homogenization in chemical engineering systems A. Zeuner, F. Hartmann: Investigation of material transport in rotating dryers by aid of Lanthanum-140 D. Manr: Tracer research for modelling of Ion-exchange equipment
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 100
    Series available for loan
    Series available for loan
    Hanover, NH : U.S. Army Cold Regions Research and Engineering Laboratory
    Associated volumes
    Call number: ZSP-201-76/27
    In: CRREL Report, 76-27
    Description / Table of Contents: In Part I a physically based model was used to predict daily snowmelt on 2000 m sq plots in the Subarctic. The plots had a range of aspects and inclinations in boreal forest and on the tundra. The energy balance, computed for each of the plots, was compensated for differences in radiative and turbulent energy fluxes caused by varied slope geometry and vegetative cover. The turbulent energy fluxes were also corrected for the effects of the stable stratification of the air over the snow surface. The predictions of the model were compared with daily melts derived from runoff measured on the snowmelt plots. The results show that the method is a good predictor of daily amounts of snowmelt, although some uncertainties are introduced by changes in the snow surface during the melt period. In Part II, a physically based model of the movement of water through snowpacks was used to calculate hydrographs generated by diurnal waves of snowmelt on the tundra and in the boreal forest of subarctic Labrador. The model was tested against measured hydrographs from hillside plots that sampled a range of aspect, gradient, length, vegetative cover, and snow depth and density. The model yielded good results, particularly in the prediction of peak runoff rates, though there was a slight overestimate of the lag time. A comparison of predictions against field measurements indicated that, given the ranges over which each of the controls is likely to vary, the two most critical factors controlling the hydrograph are the snow depth and the melt rate, which must be predicted precisely for short intervals of time. Permeability of the snowpack is another important control, but it can be estimated closely from published values.
    Type of Medium: Series available for loan
    Pages: ix, 40 Seiten , Illustrationen
    Series Statement: CRREL Report 76-27
    Language: English
    Note: Contents: Abstract Preface Summary Notation Scope of the study Part I. Energy balance computations Introduction The experimental sites Instrumentation Theoretical Radiation heat flow Hr Sensible heat flux Hc and latent heat flux He The application of the heat flow model Results and discussion Conclusions and recommendations Part II. Comparison of water runoff computations and measurements Introduction The runoff model The unsaturated zone The saturated layer The field study Instrumentation of the plots Descriptive hydrology Application of the runoff model The unsaturated zone The saturated zone Discussion and conclusions Comparison of predicted and observed hydrographs Factors affecting results Literature cited
    Location: AWI Archive
    Branch Library: AWI Library
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...