ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
The influence on the composition of iron-chromium-nickel alloys of the working conditions in complex metal sulphate baths containing ureaAn investigation has been carried out on the influence of the pH value, temprature, current density, duration of electrolysis and electrode material on the composition of iron-chromium-nickel alloys obtained from the bath of the three metal sulphates in the presence of urea and boric acid, as well as on current yield, brightness and appearance of the deposits.The three metals, iron, chromium and nickel, impede each other greatly in the deposition so that the current yields are much smaller than might be expected from the deposit ratios of the individual metals in uniformly composed baths. The maximum current yield is no more than 25 per cent. The mutual impedance in the deposition is reduced if temperature and voltage, i.e. the current density, is increased.The composition of the alloy and the current yield are largely determined by a diaphragm forming on the cathode surface and consisting of chromium hydroxide. This has a particularly great influence on the deposition of the chromium and impedes that of the nickel and, through to a lesser degree, that of the iron.
Notes:
Es wurden der Einfluß des pH-Wertes, der Temperatur, Stromdichte, Elektrolysendauer und des Elektrodenmaterials auf die Zusammensetzung von Eisen-Chrom-Nickel-Legierungen aus dem Bade der drei Metallsulfate, mit Harnstoff und Borsäure, auf Stromausbeute, Glanz und Aussehen der Niederschläge untersucht.Die drei Metalle Eisen, Chrom und Nickel behindern sich gegenseitig sehr stark bei ihrer Abscheidung, so daß weit geringere Stromausbeuten erhalten werden, als nach den Abscheidungsverhältnissen der einzelnen Metalle in gleichartig zusammengesetzten Bädern zu erwarten wäre. Die Stromausbeute erreicht maximal nur 25%. Die gegenseitige Behinderung bei der Abscheidung wird geringer, wenn die Temperatur und angelegte Spannung, also die Stromdichte, erhöht werden.Die Zusammensetzung der Legierung und Stromausbeute wird weitgehend durch ein aus Chromhydroxyd bestehendes, auf der Kathodenoberfläche sich ausbildendes Diaphragma bestimmt. Es beeinflußt besonders stark die Abscheidung des Chroms und behindert die des Nickels, weniger jedoch die des Eisens.
Additional Material:
12 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19600110705
Permalink