ALBERT

Description: The Serra Pelada Au-Pd-Pt deposit is located within the Carajás mineral province, which also hosts the world-class iron ore and iron oxide-hosted copper-gold deposits of the Amazon craton in Brazil. The unusual low-temperature hydrothermal mineralization at Serra Pelada is epigenetic, hosted by metasedimentary rocks of the Águas Claras Formation and structurally localized in the Serra Pelada overturned syncline. The orebodies are controlled by the intersection of subvertical NE-trending fault zones with metasiltstones, mainly at the syncline’s hinge, with minor ore occurrences at the upper and lower limb. Intense tropical weathering over the last 70 m.y. has completely overprinted the shallow ore in and near the flooded open pit, but primary hydrothermal features are preserved in deeper drill core delineating the remaining resource. Gold, platinum, and palladium mineralization is associated with intense argillic alteration, hematite breccias, and silicification, with the highest grade ore hosted by brecciated metasiltstones that are highly enriched in amorphous carbon. Distal alteration zones comprise a reducing and oxidizing alteration front. The hydrothermal mineral paragenesis comprises kaolinite, quartz, sericite, amesite (Mg-rich Al-silicate), amorphous carbon, hematite, monazite, rutile, pyrite, and a complex assemblage of Bi-, Ag-, Pb-, Cu-, Co-, Ni-, Pt-, Pd-, and Au-bearing, chalcogenide (S, Se), and arsenide (As, Sb) minerals. Major element changes during hydrothermal alteration include C and Mg addition, K depletion, localized silica loss, and silicification with notable introduction of trace elements including light rare earth elements (LREE), Bi, Pb, U, V, Cu, Co, Ni, and As. The hydrothermal alteration and element association of the Serra Pelada deposit show geochemical similarities with unconformity-related uranium deposits, which may also be enriched in Au, Pd, and Pt and were formed by mixing of fluids that interacted with a highly oxidized cover sequence and highly reduced rock packages in structures of brittle-ductile strain.

Description: The Serra Norte Carajás banded iron-formation (BIF)-hosted iron ore deposits are located in the Carajás mineral province. The deposits are hosted in the ca. 2.7 Ga Grão Pará Group, a metamorphosed volcanic-sedimentary sequence where jaspilites are under- and overlain by basalts, both at greenschist facies conditions. They represent one of the largest high-grade (〉60 wt % Fe) BIF iron ore deposits and resources in the world, with hypogene iron mineralization considered to be Paleoproterozoic. Four main open pits have, to date, produced about 1.2 billion metric tons (Bt) of high-grade iron ore with additional resources of 10 Bt. Ore types at the Serra Norte deposits include soft and hard ore; the latter consists of banded, massive and/or brecciated ores and is mainly localized along the contact with the surrounding hydrothermally altered basalts. Distinct hydrothermal alteration zones consist of veins and breccias that surround the hard ores, including: (1) an early alteration zone (distal portion of orebodies), characterized by recrystallization of jasper, formation of magnetite (± martite), and the local introduction of quartz and carbonate-sulfide (±quartz) veins; (2) intermediate alteration, synchronous with the main iron ore-forming event, which is accompanied by widespread development of martite, quartz-hematite and hematite-quartz veins, and dissolution of carbonate; and (3) proximal alteration zone having various types of hard and hard-porous hematite ores containing microplaty, anhedral, euhedral, and tabular hematite species. Locally, high-grade breccia ores contain dolomite and kutnahorite matrices indicating carbonate introduction. High-grade ore zones contain quartz ± carbonate-hematite veins and breccias. Combined microthermometry, iron chromatography, and in situ laser ablation ICP-MS analyses on fluid inclusion assemblages from five vein types reveal that (1) early alteration vein-breccia quartz-carbonate contains high-salinity (up to 30 equiv wt % NaCl) fluid inclusions, with Ca, besides Na, K, and Mg, which were trapped at temperatures of 220° to 320°C. The quartz-hosted fluid inclusions have a wide range of Cl/Br ratios, presence of Li, base metals Cu-Pb-Zn, and Fe; (2) intermediate alteration vein quartz contains both low-salinity (Na-Fe-Mg-rich) and high-salinity (Ca-Mg-Fe-rich) fluid inclusions, with trapping temperatures of 210° to 290°C; (3) advanced alteration vein and breccia quartz-carbonate has low- to high-salinity fluid inclusions and trapping temperatures between 240° to 310°C, with the low-salinity inclusions being much more abundant in quartz. There is a gradual dilution of the metals signature in fluid inclusions from early to late- and/or advanced-stage veins and breccias. The large amount of Ca in the fluid inclusions is compatible with extensive exchange of the hydrothermal fluids with the surrounding chloritized-hematitized metabasaltic wall rock. Oxygen isotope analyses on different oxide species reveal that the heaviest 18 O SMOW values, up to 15.2, are recorded for jaspilites, followed by magnetite, between –0.4 to +4.3, and then by different hematite species such as microplaty, anhedral and tabular, which fall in the range of –9.5 to –2.4. These results show a progressive depletion in 18 O values from the earliest introduced hydrothermal oxide magnetite toward the latest tabular hematite. The advanced alteration stage in high-grade ore displays the most depleted 18 O values and represents the highest fluid/rock ratio during hydrothermal alteration. This depletion is interpreted to result from the progressive mixture of descending, heated meteoric water with ascending modified magmatic fluids. Sulfides from the distal zone of metabasaltic rocks have 34 S values close to 0, consistent with a magmatic origin for the sulfur. Heavier 34 S values, of up to 10.8, in vein sulfides hosted in jaspilite, may reflect interaction with meteoric waters or, alternatively, variations in f O 2 and pH conditions during evolution of the hydrothermal fluid. Calcite-kutnahorite 13 C and 18 O values from the distal alteration zones show a large 13 C range of –5.5 to –2.4 and a relatively narrow 18 O range of 9.3 to 11.7. However, dolomite matrix breccias from the advanced hydrothermal zone, i.e., ore, exhibit a wider 18 O range from 15.1 to 21.8 and a more restricted 13 C range from –5.0 to –3.9. This latter range points to a single carbon source, of possible magmatic nature, whereas the larger 18 O range suggests multiple carbon and oxygen sources. The 87 Sr/ 86 Sr ratios for carbonates from the distal and advanced hydrothermal zones range between 0.7116 to 0.7460, suggesting incorporation of strontium from multiple crustal sources, including magmatic-hydrothermal fluids. A dual magmatic-meteoric hydrothermal fluid-flow model is proposed for the hematite ores in which an early, low Cl/Br ratio, saline, ascending modified magmatic fluid, caused widespread oxidation of magnetite to hematite. Progressive influx of light 18 O meteoric water, mixing with the ascending magmatic fluids, is interpreted to have been initiated during the intermediate stage of alteration. The advanced and final hydrothermal stage was dominated by a massive influx of low-salinity meteoric water, which maintained intermediate temperatures of 240° to 310°C, and concomitant formation of the paragenetically latest tabular hematite. The giant Carajás iron deposits are unique in their setting within an Archean granite-greenstone belt and their modified magmatic-meteoric hydrothermal system, compared to the other two end-member BIF iron deposit types, namely the basin-related Hamersley type and the metamorphosed metasedimentary- basin-related Iron-Quadrangle-type. The distinct hydrothermal alteration signature present in both wall-rock basalts and jaspilites, in combination with distinct fluid chemistry signatures, particularly the low 18 O values of paragenetically late oxides indicative of massive influx of meteoric water into the high-grade orebodies, provide distinctive parameters for defining the Carajás end-member type BIF deposit class.