ISSN:
0947-5117
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Description / Table of Contents:
Lochkorrosionspotentiale von AluminumlegierungenDas Lochkorrosionspotential der folgenden Aluminiumlegierungen wurde in 3%iger NaCl-Lösung potentiodynamisch und potentiostatisch bestimmt: Al-2,7 Mg-(0-,94) Mn; Al-2,7 Mg-0,43 Mn-(d0-0.3) Cr; Al-4,7 Mg-0,13 Cr-0,78 Mn; Al-5,1 Mg-0,1 Sb; al-5,1 Mg-0,3 Sb; Al-2S-1/2H (handelsübliches Aluminum) und hochreines Aluminum (99,99 Al). Die Ergebbisse zeigen, daß die Legierungszusätze das Lochfraßpotential nicht sehr stark beeinflussen. Mit zunehmendem Magnesiumgehalt nimmt das Lochfraßpotential ab, während es mit zunehmendem Mangangehalt bis zu einem bestimmten Punkt zunimmt. Die Art und die Menge der Sekundärphasen scheinen das Lockkorrosionspotential nicht merklich zu beeinflussen.
Notes:
The pitting potential of the following aluminum alloys in 3% sodium chloride solution was measured using potentiodynamic and potentionstatic methods: Al-2.7 Mg with 0-0.47% Cr, Al-2.7 Mg with 0-0.94% Mn, Al-2.7 Mg-0.43 Mn with 0-0.31% Cr, Al-4.7 Mg-0.13 Cr-0.78 Mn, Al-51 Mg with 0.1 and 0.3% Sb, Al 2S-1/2H (commercial aluminum) super pure Al (99,99% Al). The results show that the pitting potential is not much affected by the alloying elements. The pitting potetial decreases with increasing content of magnesium and increases slightly with increasing content of manganese up to a certain point. The nature and amount of secondary phases do not seem to have any marked influence upon the pitting potential.
Additional Material:
4 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/maco.19770280704
Permalink