ISSN:
0887-6266
Keywords:
high density polyethylene
;
hydrogenated oligo(cyclopentadiene)
;
blends
;
phase structure
;
stress-strain
;
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Physics
Notes:
The influence of hydrogenated olio(cyclopentadiene) (HOCP) on tensile mechanical properties of its blends with high density polyethylene (HDPE) has been studied at 20, 80, and 100°C. The nominal stress-strain curves performed at 20°C indicate an increase of the modulus and a conspicuous decrease of the ultimate properties increasing the HOCP content in the blend. Blends with HOCP content 〉 20%-wt are found to be very fragile at 20°C. These behaviors have been related to the presence of the HOCP-rich phase that has the glass transition at about 55°C. At 20°C the HOCP oligomers act as a hardener for the HDPE. The nominal stress-strain curves performed at 80 and 100°C show a strong decrease of the modulus (compared to the value at 20°C), plastic deformation for all the blends tested, and rupture of HDPE and blend samples at the beginning of the cold-drawing. Moreover, the modulus and the ultimate parameters are found to decrease with the composition. The behaviors at 80 and 100°C have been related to several factors: the higher mobility of HDPE molecules at these temperatures compared to that at 20°C; the HOCP-rich phase that is at temperatures higher than its glass transition, and so it acts as a plasticizer for the HDPE; and the decreases of crystallinity and number of entanglements when the HOCP is added to the HDPE component. ©1995 John Wiley & Sons, Inc.
Additional Material:
10 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/polb.1995.090331203
Permalink