ISSN:
1572-8935
Keywords:
Poly(ether sulfone)
;
Epoxy resin
;
Physical aging
;
DSC
Source:
Springer Online Journal Archives 1860-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
Abstract The physical aging process of 4-4′-diaminodiphenylsulfone (DDS) cured diglycidyl ether bisphenol-A (DGEBA) blended with various molecular weights of poly(ether sulfone) (PES; Mn = 28,600, 10,600, and 6,137) was studied by DSC. For DGEBA/DDS system blended with a low MW PES-3 (Mn = 6,137), no phase separation of the polymer blend and only one enthalpic relaxation process due to physical aging was observed. Since the high MW PES-1 (Mn = 28,600) had a Tg close to that of fully cured DGEBA/DDS, the fully cured DGEBA/DDS/PES-1 blend had a broader glass transition than a neat DGEBA/DDS system. However, the DSC results showed two enthalpic relaxation processes due to the physical aging of PES-rich and cured epoxy-rich phases as the material was aged at 155 °C (30 °C below Tg). Since the Tgs of PES-1-rich and epoxy-rich phases overlapped with each other, the enthalpic relaxation processes corresponding to each phase coupled to each other in the earlier stage of physical aging. The medium MW PES-2 (Mn = 10,600) has a much lower Tg than that of fully cured DGEBA/DDS, two well separated Tgs were observed for the cured DGEBA/DDS/PES-2 blend, indicating the cured epoxy was immiscible with PES. Aging the polymer blend at 155 °C (24 °C below Tg1 of the PES-2-rich phase and 53 °C below Tg2 of the epoxy-rich phase) produced two well separated relaxation processes due to PES-2-rich and epoxy-rich phases. The experimental results suggested that aging the polymer blend at a suitable temperature would improve the phase separation between PES-1-rich and epoxy-rich phases.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1007/s10965-006-0128-6
Permalink