ALBERT

Description: As the negative impacts of hydrological extremes increase in large parts of the world, a better understanding of the drivers of change in risk and impacts is essential for effective flood and drought risk management and climate adaptation. However, there is a lack of comprehensive, empirical data about the processes, interactions and feedbacks in complex human-water systems leading to flood and drought impacts. To fill this gap, we present an IAHS Panta Rhei benchmark dataset containing socio-hydrological data of paired events, i.e. two floods or two droughts that occurred in the same area (Kreibich et al. 2017, 2019). The contained 45 paired events occurred in 42 different study areas (in three study areas we have data on two paired events), which cover different socioeconomic and hydroclimatic contexts across all continents. The dataset is unique in covering floods and droughts, in the number of cases assessed and in the amount of qualitative and quantitative socio-hydrological data contained. References to the data sources are provided in 2022-002_Kreibich-et-al_Key_data_table.xlsx where possible. Based on templates, we collected detailed, review-style reports describing the event characteristics and processes in the case study areas, as well as various semi-quantitative data, categorised into management, hazard, exposure, vulnerability and impacts. Sources of the data were classified as follows: scientific study (peer-reviewed paper and PhD thesis), report (by governments, administrations, NGOs, research organisations, projects), own analysis by authors, based on a database (e.g. official statistics, monitoring data such as weather, discharge data, etc.), newspaper article, and expert judgement. The campaign to collect the information and data on paired events started at the EGU General Assembly in April 2019 in Vienna and was continued with talks promoting the paired event data collection at various conferences. Communication with the Panta Rhei community and other flood and drought experts identified through snowballing techniques was important. Thus, data on paired events were provided by professionals with excellent local knowledge of the events and risk management practices.

Description: As the negative impacts of hydrological extremes increase in large parts of the world, a better understanding of the drivers of change in risk and impacts is essential for effective flood and drought risk management and climate adaptation. However, there is a lack of comprehensive, empirical data about the processes, interactions and feedbacks in complex human-water systems leading to flood and drought impacts. To fill this gap, we present an IAHS Panta Rhei benchmark dataset containing socio-hydrological data of paired events, i.e. two floods or two droughts that occurred in the same area (Kreibich et al. 2017, 2019). The contained 45 paired events occurred in 42 different study areas (in three study areas we have data on two paired events), which cover different socioeconomic and hydroclimatic contexts across all continents. The dataset is unique in covering floods and droughts, in the number of cases assessed and in the amount of qualitative and quantitative socio-hydrological data contained. References to the data sources are provided in 2023-001_Kreibich-et-al_Key_data_table.xlsx where possible. Based on templates, we collected detailed, review-style reports describing the event characteristics and processes in the case study areas, as well as various semi-quantitative data, categorised into management, hazard, exposure, vulnerability and impacts. Sources of the data were classified as follows: scientific study (peer-reviewed paper and PhD thesis), report (by governments, administrations, NGOs, research organisations, projects), own analysis by authors, based on a database (e.g. official statistics, monitoring data such as weather, discharge data, etc.), newspaper article, and expert judgement. The campaign to collect the information and data on paired events started at the EGU General Assembly in April 2019 in Vienna and was continued with talks promoting the paired event data collection at various conferences. Communication with the Panta Rhei community and other flood and drought experts identified through snowballing techniques was important. Thus, data on paired events were provided by professionals with excellent local knowledge of the events and risk management practices.

Description: The Digital Earth Flood Event Explorer supports geoscientists and experts to analyse flood events along the process cascade event generation, evolution and impact across atmospheric, terrestrial, and marine disciplines. It applies the concept of scientific workflows and the component-based Data Analytics Software Framework (DASF, Eggert and Dransch, 2021) to an exemplary showcase. It aims at answering the following geoscientific questions: - How does precipitation change over the course of the 21st century under different climate scenarios over a certain region? - What are the main hydro-meteorological controls of a specific flood event? - What are useful indicators to assess socio-economic flood impacts? - How do flood events impact the marine environment? - What are the best monitoring sites for upcoming flood events? The Flood Event Explorer developed scientific workflows for each geoscientific question providing enhanced analysis methods from statistics, machine learning, and visual data exploration that are implemented in different languages and software environments, and that access data form a variety of distributed databases. The collaborating scientists are from different Helmholtz research centers and belong to different scientific fields such as hydrology, climate-, marine-, and environmental science, and computer- and data science. It is funded by the Initiative and Networking Fund of the Helmholtz Association through the Digital Earth project (https://www.digitalearth-hgf.de/).

Description: “1-month seismological experiment on Etna, Italy in 2019" is a 1-month seismological experi-ment realized near the Pizzi Deneri Observatory on Etna, Italy, by Eva Eibl and Daniel Vollmer (University of Potsdam) in collaboration with Philippe Jousset from GFZ Potsdam Germany and Gilda Currenti and Graziano Larocca from INGV-OE, Italy. From August to September 2019, we recorded the volcano-seismic events accompanying the volcanic activity using a rotational sensor and a co-located seismometer. The aim of the seismological experiment was to study LP events, VT events and tremor. We used a 3-component broadband seismometer (Nanometrics Trillium Compact 120 s) and a 3-component rotational sensor (iXblue blueSeis-3A) and stored the data on a DataCube and CommunicationCube, respectively. Sensors were installed on the same 35 * 35 * 3 cm3 granitic base plate at about 40 cm depth enclosed by backfilled pyroclastic material to avoid wind noise. The instruments recorded at 200 Hz sampling rate and were located about 2 km from the craters on Etna. The setup was powered using 3 solar panels of 140W each and three batteries of 75Ah each. We oriented the rotational sensor and seismometer using a Quadrans fiber-optical gyrocompass. The Quadrans is not affected by magnetic minerals in the ground and our sensors are hence properly aligned to geographic north. We converted the seismometer data to MSEED using Pyrocko’s Jackseis program and created a catalogs of LP events and VT events that were further investigated in Eibl et al. 2022. Waveform data are available from the GEOFON data centre, under network code ZR.

Description: floodsimilarity provides classes and methods to conduct a similarity analysis between multiple flood events. The library mainly consists of two parts: (1) algorithms to compute indices and other statistics based on pandas and xarray (2) well-defined data structures for data exchange (e.g. through the Similarity Backend Module) floodsimilarity is used by the Digital Earth Similarity Backend Module (Eggert, 2021) as part of the Digital Earth Flood Event Explorer. It is developed at the GFZ German Research Centre for Geosciences and funded by the Initiative and Networking Fund of the Helmholtz Association through the Digital Earth project.

Description: The success of scientific projects increasingly depends on using data analysis tools and data in distributed IT infrastructures. Scientists need to use appropriate data analysis tools and data, extract patterns from data using appropriate computational resources, and interpret the extracted patterns. Data analysis tools and data reside on different machines because the volume of the data often demands specific resources for their storage and processing, and data analysis tools usually require specific computational resources and run-time environments. The data analytics software framework DASF, developed at the GFZ German Research Centre for Geosciences (https://www.gfz-potsdam.de) and funded by the Initiative and Networking Fund of the Helmholtz Association through the Digital Earth project (https://www.digitalearth-hgf.de/), provides a framework for scientists to conduct data analysis in distributed environments. The data analytics software framework DASF supports scientists to conduct data analysis in distributed IT infrastructures by sharing data analysis tools and data. For this purpose, DASF defines a remote procedure call (RPC) messaging protocol that uses a central message broker instance. Scientists can augment their tools and data with this protocol to share them with others. DASF supports many programming languages and platforms since the implementation of the protocol uses WebSockets. It provides two ready-to-use language bindings for the messaging protocol, one for Python and one for the Typescript programming language. In order to share a python method or class, users add an annotation in front of it. In addition, users need to specify the connection parameters of the message broker. The central message broker approach allows the method and the client calling the method to actively establish a connection, which enables using methods deployed behind firewalls. DASF uses Apache Pulsar (https://pulsar.apache.org/) as its underlying message broker. The Typescript bindings are primarily used in conjunction with web frontend components, which are also included in the DASF-Web library. They are designed to attach directly to the data returned by the exposed RPC methods. This supports the development of highly exploratory data analysis tools. DASF also provides a progress reporting API that enables users to monitor long-running remote procedure calls. One application using the framework is the Digital Earth Flood Event Explorer (https://git.geomar.de/digital-earth/flood-event-explorer). The Digital Earth Flood Event Explorer integrates several exploratory data analysis tools and remote procedures deployed at various Helmholtz centers across Germany.

Description: This dataset presents the raw data from two experimental series of analogue models and four numerical models performed to investigate Rift-Rift-Rift triple junction dynamics, supporting the modelling results described in the submitted paper. Numerical models were run in order to support the outcomes obtained from the analogue models. Our experimental series tested the case of a totally symmetric RRR junction (with rift branch angles trending at 120° and direction of stretching similarly trending at 120°; SY Series) or a less symmetric triple junction (with rift branches trending at 120° but with one of these experiencing orthogonal extension; OR Series), and testing the role of a single or two phases of extension coupled with effect of differential velocities between the three moving plates. An overview of the performed analogue and numerical models is provided in Table 1. Analogue models have been analysed quantitatively by means of photogrammetric reconstruction of Digital Elevation Model (DEM) used for 3D quantification of the deformation, and top-view photo analysis for qualitative descriptions. The analogue materials used in the setup of these models are described in Montanari et al. (2017), Del Ventisette et al. (2019) and Maestrelli et al. (2020). Numerical models were run with the finite element software ASPECT (e.g., Kronbichler et al., 2012; Heister et al., 2017; Rose et al., 2017).

Description: The River Plume Workflow is part of the Flood Event Explorer (FEE, Eggert et al., 2022), developed at the GFZ German Research Centre for Geosciences in close collaboration with Helmholtz-Zentrum Hereon. It is funded by the Initiative and Networking Fund of the Helmholtz Association through the Digital Earth project (https://www.digitalearth-hgf.de/). The focus of the River Plume Workflow is the impact of riverine flood events on the marine environment. At the end of a flood event chain, an unusual amount of nutrients and pollutants is washed into the North Sea, which can have consequences, such as increased algae blooms. The workflow aims to enable users to detect a river plume in the North Sea and to determine its spatio-temporal extent. Identifying river plume candidates can either happen manually in the visual interface or also through an automatic anomaly detection algorithm, using Gaussian regression. In both cases a combination of observational data, namely FerryBox transects and satellite data, and model data are used. Once a river plume candidate is found, a statistical analysis supplies additional detail on the anomaly and helps to compare the suspected river plume to the surrounding data. Simulated trajectories of particles starting on the FerryBox transect at the time of the original observation and modelled backwards and forwards in time help to verify the origin of the river plume and allow users to follow the anomaly across the North Sea. An interactive map enables users to load additional observational data into the workflow, such as ocean colour satellite maps, and provides them with an overview of the flood impacts and the river plume’s development on its way through the North Sea. In addition, the workflow offers the functionality to assemble satellite-based chlorophyll observations along model trajectories as a time series. They allow scientists to understand processes inside the river plume and to determine the timescales on which these developments happen. For example, chlorophyll degradation rates in the Elbe river plume are currently investigated using these time series. The workflow's added value lies in the ease with which users can combine observational FerryBox data with relevant model data and other datasets of their choice. Furthermore, the workflow allows users to visually explore the combined data and contains methods to find and highlight anomalies. The workflow’s functionalities also enable users to map the spatio-temporal extent of the river plume and investigate the changes in productivity that occur in the plume. All in all, the River Plume Workflow simplifies the investigation and monitoring of flood events and their impacts in marine environments.

Description: The stochastic erosion in-situ cosmogenic nuclide model is a 1D numerical model that simulates the evolution of the concentrations of in situ-produced Be-10, C-14, and He-3 alongside the bedrock thermal field in the shallow Earth surface. It is useful for evaluating cosmogenic nuclide data derived from field samples, in order to determine the erosion rate, erosion style, as well as the time-integrated bedrock thermal history. The model simulates erosion in four styles: no erosion, uniform (steady-state) erosion, episodic erosion, and stochastic erosion. It is particularly useful for evaluating the time-temperature evolution of bedrock hillslopes in mountainous regions.

Description: The Community Stress Drop Validation Study has been organized as a technical activity group (TAG) of SCEC (Southern California Earthquake Center) with the aim of investigating the source parameters of the 2019 Ridgecrest seismic sequence in California. Information about the stress drop TAG are available trough the benchmark web-page (https://www.scec.org/research/stress-drop-validation). Several groups applied different techniques to a shared data set with the objective of extracting source parameters (e.g. seismic moment and corner frequency) and in turn to estimate the stress drop. We applied a spectral decomposition approach known as generalized inversion technique (GIT) and the overall analyses are presented in a series of two articles (Bindi et al 2023a; Bindi et al 2023b). Results in the form of files, figures, and tables are disseminated through this archive.