ISSN:
1551-2916
Source:
Blackwell Publishing Journal Backfiles 1879-2005
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
A commercially available, sintered silicon carbide was exposed to a temperature of 982°C for up to 50 h in a burner rig pressurized to 500 kPa. Synthetic sea salt added to the flame (5 ppm) resulted in the deposition of sodium sulfate and formation of a sodium magnesium silicate corrosion product. A 16% reduction in room-temperature strength occurred after 5 h of exposure; this reduction was due to the formation of surface pits. Exposure for longer times resulted in continued strength reduction, up to 56% at 25 h. Samples exposed for 50 h were so degraded that mechanical tests could not be conducted. The strength after 25 h of exposure to a salt concentration of 2 ppm was similar to the as-received strength, whereas exposures to 10 ppm of salt resulted in strengths similar to that observed with 5 ppm of salt.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1111/j.1151-2916.1998.tb02517.x