ISSN:
1089-7623
Source:
AIP Digital Archive
Topics:
Physics
,
Electrical Engineering, Measurement and Control Technology
Notes:
The system of single bunch injection (SBI) for the storage ring NIJI-IV was completed. The system was used for the injection of the short pulse beams from an electron gun into only one of the 16 rf buckets in the ring. On a compact storage ring, the multipulse beams in one pulse train can be stored into only one of many bunches by one injection. The optimum number of the grid pulse in one pulse train was determined to improve the storage efficiency and the storage current by one injection. The keeping time of the bump orbit was calculated by using the transfer matrices. The optimum pulse number obtained by the calculation is 2. In the SBI system, the number of grid pulses in one pulse train can be selected by the gate circuit. A snap off diode and a clip line are used to generate 2 ns grid pulses. The measured grid pulse was shorter than the longitudinal space 5.5 ns of the rf bucket with voltage of −80 V. The EIMAC Y-646B cathode-grid assembly is used as the electron source. It is expected that the injection system provides a higher peak current and easier free electron laser use operation in comparison with the rf-knockout system. © 1995 American Institute of Physics.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1063/1.1145557
