ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Epitaxial TiN thin films on silicon substrates were prepared by pulsed excimer laser (KrF, 34 ns) ablation of a hot-pressed TiN target in nitrogen gas atmosphere. X-ray diffraction (XRD) showed that the preferred orientations of TiN thin films did not change with substrate temperatures, nitrogen gas pressure and film thickness; however, they did change with the orientations of substrates. The epitaxial orientation relationships between high-quality epitaxial TiN thin films and silicon substrates [2 4 2] TiN∥ [2 4 2] Si, (1 1 1) TiN∥(1 1 1) Si and [3 1 1] TiN∥ [3 1 1] Si, (1 0 0) TiN∥(1 0 0) Si. The full-width at half-maximum (FWHM) of the rocking curve of XRD and the minimum channelling yield of Rutherford backscattered spectroscopy (RBS) of the epitaxial TiN thin film were estimated to be 0.3 ° and 7.3%, respectively, indicating excellent crystalline quality of the grown film. X-ray photoelectron spectroscopy confirmed that the binding energies of Ti 2p 3/2 and N 1s core levels in epitaxial thin film were 455.2 and 397.1 eV, respectively, corresponding to those of TiN bulk. By calibrating the RBS spectra, the chemical composition of TiN thin films was found to be titanium-rich. The typical surface roughness of TiN thin film observed by scanning probe microscopy was about 1.5 nm. © 1998 Chapman & Hall
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1004332700363
