ISSN:
0021-8995
Keywords:
Chemistry
;
Polymer and Materials Science
Source:
Wiley InterScience Backfile Collection 1832-2000
Topics:
Chemistry and Pharmacology
,
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
,
Physics
Notes:
The solid-state extrusion technique has been used to prepare uniaxially oriented polyethylene bars with rectangular end cross sections of 6 × 50 mm2. They were extruded at 110°C from billets of high density polyethylene. The tensile modulus and strength for the extrudate with a draw ratio (DR) of 14 were 17.9 and 0.32 GPa, respectively. The mechanicals were also measured in the transverse direction by means of the proportional elastic limit (PEL) bending test. The PEL results do not change after DR 14 due to the fibrillate structure formation. Crystallinity and shrinkage tests were made on samples taken over the bar cross section. They show that uniform properties were achieved across the width of the bar with proper die design. © 1994 John Wiley & Sons, Inc.
Additional Material:
6 Ill.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1002/app.1994.070520905
