ISSN:
1434-453X
Quelle:
Springer Online Journal Archives 1860-2000
Thema:
Architektur, Bauingenieurwesen, Vermessung
,
Geologie und Paläontologie
Notizen:
Summary Direct shear tests, in which the behaviour of the rock surfaces during shear could be continuously observed, were used to study the shear failure of a profiled and clean discontinuity artificially prepared from natural sandstone. Displacement transducers were used to measure the normal and shear displacements. A series of strain gauges glued on the sides of the upper block provided information on the change of the stress field occurring close to the discontinuities whilst shear displacement increased, and these changes were then compared with the behaviour of the profiled surface. The results of the laboratory tests, the sequence of photographs taken for most of them, and the results conducted with a sample of similar shape made from the same rock material and tested in a rotary shear machine, allowed several stages and mechanisms of failure to be defined: static friction and mobilization of initial shear stiffness; mobilization of sliding; mobilization of brittle fracture; post-peak failure of the teeth; descent of the teeth; gliding and ploughing; commencement of second cycle of shearing. In many respects these stages are similar to those occurring between sliding surfaces of metal and suggest that the analyses developed in tribology may be relevant to the development of constitutive models for predicting the hydromechanical coupled behaviour of a discontinuity with shear displacement. Such models will have to consider these different stages of shear, because the original discontinuity changes its geometry with displacement and is filled with gouge which changes its grain size with displacement.
Materialart:
Digitale Medien
URL:
http://dx.doi.org/10.1007/BF01040115
