ISSN:
1573-4803
Source:
Springer Online Journal Archives 1860-2000
Topics:
Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
Notes:
Abstract Effects of oxygen active elements, yttrium and cerium, as additives in commercial lubricants on corrosive wear were investigated. Sliding wear losses of stainless steel 304 and Al alloy 6061 lubricated by oil and thin grease respectively with and without yttrium or cerium additive in a corrosive environment were determined. Dilute H2SO4 solution (10% H2SO4) was used as the corrosive medium and added to the lubricants for the corrosive wear test. The wear test was performed on a pin-on-disc tribometer with the capability of measuring wear in lubricant. The disc was coiled with a copper tube, through which cooling water could pass, so that the wear losses respectively under cooling condition and non-cooling condition could be determined. The results showed that wear losses of the tested materials caused by synergistic attack of wear and corrosion can be effectively reduced by adding small amounts of yttrium or cerium to the lubricant. In addition, the effect of the additives was found more distinctive under the non-cooling condition. Worn surfaces were examined using SEM to clarify the wear mode and thus the wear mechanism.
Type of Medium:
Electronic Resource
URL:
http://dx.doi.org/10.1023/A:1004780528202
