ALBERT

Description: The development of miniaturized robotic swimmers is hindered by technical limitations in micro- and nanofabrication. To circumvent these limitations, we investigated the minimal geometrical requirements for swimming in low Reynolds number. Micro- and nanofabrication of complex shapes, such as helices, on a massive scale requires sophisticated state of the art technologies and has size limitations. In contrast, simple shaped structures, such as spherical particles, can be fabricated massively using chemical synthesis with relative ease. Here, simple microswimmers were fabricated using two microparticles with debris attached to their surface. The debris on the microswimmer's surface creates a geometry with two or more planes of symmetry, allowing the microswimmer to swim in bulk fluid at low Reynolds number. The microswimmers are magnetically actuated and controlled via a uniform rotating magnetic field generated by an approximate Helmholtz electromagnetic coil system. We characterized the microswimmer's velocity profile with respect to rotating frequency and analyzed the motion of the microswimmer using image processing. Finally, we demonstrated the controllability of the microswimmers by freely steering them in any desired directions.

Description: This paper deals with the stability and bifurcation analysis of a general form of equation D α x ( t ) = g ( x ( t ) , x ( t − τ ) ) involving the derivative of order α ∈ (0, 1] and a constant delay τ  ≥ 0. The stability of equilibrium points is presented in terms of the stability regions and critical surfaces. We provide a necessary condition to exist chaos in the system also. A wide range of delay differential equations involving a constant delay can be analyzed using the results proposed in this paper. The illustrative examples are provided to explain the theory.

Description: In this paper, we propose a new consensus model in which the interactions among agents stochastically switch between attraction and repulsion. Such a positive-and-negative mechanism is described by the white-noise-based coupling. Analytic criteria for the consensus and non-consensus in terms of the eigenvalues of the noise intensity matrix are derived, which provide a better understanding of the constructive roles of random interactions. Specifically, we discover a positive role of noise coupling that noise can accelerate the emergence of consensus. We find that the converging speed of the multi-agent network depends on the square of the second smallest eigenvalue of its graph Laplacian. The influence of network topologies on the consensus time is also investigated.

Description: After having the issues of singularity and locality addressed recently in mathematical modelling, another question regarding the description of natural phenomena was raised: How influent is the second parameter β of the two-parameter Mittag-Leffler function E α , β ( z ) ,   z ∈ ℂ ? To answer this question, we generalize the newly introduced one-parameter derivative with non-singular and non-local kernel [A. Atangana and I. Koca, Chaos, Solitons Fractals 89 , 447 (2016); A. Atangana and D. Bealeanu (e-print)] by developing a similar two-parameter derivative with non-singular and non-local kernel based on E α , β ( z ). We exploit the Agarwal/Erdelyi higher transcendental functions together with their Laplace transforms to explicitly establish the Laplace transform's expressions of the two-parameter derivatives, necessary for solving related fractional differential equations. Explicit expression of the associated two-parameter fractional integral is also established. Concrete applications are done on atmospheric convection process by using Lorenz non-linear simple system. Existence result for the model is provided and a numerical scheme established. As expected, solutions exhibit chaotic behaviors for α less than 0.55, and this chaos is not interrupted by the impact of β . Rather, this second parameter seems to indirectly squeeze and rotate the solutions, giving an impression of twisting. The whole graphics seem to have completely changed its orientation to a particular direction. This is a great observation that clearly shows the substantial impact of the second parameter of E α , β ( z ), certainly opening new doors to modeling with two-parameter derivatives.

Description: This paper presents the first design and experimental demonstration of an ultrahigh frequency complete phononic crystal (PnC) bandgap aluminum nitride (AlN)/air structure operating in the GHz range. A complete phononic bandgap of this design is used to efficiently and simultaneously confine elastic vibrations in a resonator. The PnC structure is fabricated by etching a square array of air holes in an AlN slab. The fabricated PnC resonator resonates at 1.117 GHz, which corresponds to an out-of-plane mode. The measured bandgap and resonance frequencies are in very good agreement with the eigen-frequency and frequency-domain finite element analyses. As a result, a quality factor/volume of 7.6 × 10 17 /m 3 for the confined resonance mode was obtained that is the largest value reported for this type of PnC resonator to date. These results are an important step forward in achieving possible applications of PnCs for RF communication and signal processing with smaller dimensions.

Description: In this work, titanium dioxide nanotubes were prepared by using titanium foils via electrochemical anodization in ethylene glycol solutions containing different amounts of water and fluoride in the ranges of 1%–3% and 0.15%–0.5%, respectively, to determine their effects on morphology, optical, and crystalline structure properties. Annealing processes were performed on all samples in the range between 273 and 723 K. Morphology and structure properties of the samples were studied by scanning electron microscopy, X-ray diffraction (XRD), and transmission electron microscopy. Titanium dioxide (TiO 2 ) nanotubes, through anodization method, are strongly influenced by conditions, like fluoride concentration and applied voltages. Tube lengths between 2 and 7  μ m were obtained, exhibiting different diameters and wall thicknesses. When alternating voltage was applied, the outer surface of the nanotubes exhibited evenly spaced ring-shaped regions, while smooth tubes were observed when constant voltage was applied. Reflection peaks, corresponding to Brookite, Anatase, and Rutile, of TiO 2 phases, were observed from the XRD pattern. These phases were corroborated via μXRD measurements, and the Ti 3 O 5 phase was also observed in detail. Absorption coefficient (α), optical band gap (Eg), and extinction coefficient (ε) of TiO 2 nanotubes were calculated by transmittance spectra in the UV–Vis range. Strong absorption was noted in the UV region from reflectance and absorbance measurements. A correlation between synthesis parameters and physical properties is presented.

Description: We describe the principles of design, fabrication, and operation of a piezoelectric optomechanical crystal with which we demonstrate bi-directional conversion of energy between microwave and optical frequencies. The optomechanical crystal has an optical mode at 1523 nm co-located with a mechanical breathing mode at 3.8 GHz, with a measured optomechanical coupling strength g om /2π of 115 kHz. The breathing mode is driven and detected by curved interdigitated transducers that couple to a Lamb mode in suspended membranes on either end of the optomechanical crystal, allowing the external piezoelectric modulation of the optical signal as well as the converse, the detection of microwave electrical signals generated by a modulated optical signal. We compare measurements to theory where appropriate.

Description: A large laser modulated resistance effect was observed in a Cu 2 O heterojunction of Cu 2 O/Si. Compared to the no laser illumination condition, the lateral resistance of the Cu 2 O film was greatly altered. More interestingly, through the spatial movement of a laser spot between two electrodes, a tunable resistance with good linearity was achieved. We attribute this surface resistance effect to the difference in carrier mobility and carrier density between the Cu 2 O and Si sides. The strong linear resistance change ratio of Cu 2 O/Si indicates that this simple PN heteroepitaxial junction structure is a potential candidate for laser-controlled resistors, sensors, and even storage devices.

Description: It is well known that two-dimensional macroscale shear flows are susceptible to instabilities leading to macroscale vortical structures. The linear and nonlinear fate of such a macroscale flow in a strongly coupled medium is a fundamental problem. A popular example of a strongly coupled medium is a dusty plasma, often modelled as a Yukawa liquid. Recently, laboratory experiments and molecular dynamics (MD) studies of shear flows in strongly coupled Yukawa liquids indicated the occurrence of strong molecular shear heating, which is found to reduce the coupling strength exponentially leading to the destruction of macroscale vorticity. To understand the vortex dynamics of strongly coupled molecular fluids undergoing macroscale shear flows and molecular shear heating, MD simulation has been performed, which allows the macroscopic vortex dynamics to evolve, while at the same time “removes” the microscopically generated heat without using the velocity degrees of freedom. We demonstrate that by using a configurational thermostat in a novel way, the microscale heat generated by shear flow can be thermostatted out efficiently without compromising the large scale vortex dynamics. In the present work, using MD simulations, a comparative study of shear flow evolution in Yukawa liquids in the presence and absence of molecular or microscopic heating is presented for a prototype shear flow, namely, Kolmogorov flow.

Description: Hydrodynamic interactions with confining boundaries often lead to drastic changes in the diffusive behaviour of microparticles in suspensions. For axially symmetric particles, earlier numerical studies have suggested a simple form of the near-wall diffusion matrix which depends on the distance and orientation of the particle with respect to the wall, which is usually calculated numerically. In this work, we derive explicit analytical formulae for the dominant correction to the bulk diffusion tensor of an axially symmetric colloidal particle due to the presence of a nearby no-slip wall. The relative correction scales as powers of inverse wall-particle distance and its angular structure is represented by simple functions in sines and cosines of the particle’s inclination angle to the wall. We analyse the correction for translational and rotational motion, as well as the translation-rotation coupling. Our findings provide a simple approximation to the anisotropic diffusion tensor near a wall, which completes and corrects relations known from earlier numerical and theoretical findings.

Description: This manuscript presents the second, consistent density functional in the QTP (Quantum Theory Project) family, that is, the CAM-QTP(01). It is a new range-separated exchange-correlation functional in which the non-local exchange contribution is 100% at large separation. It follows the same basic principles of this family that the Kohn-Sham eigenvalues of the occupied orbitals approximately equal the vertical ionization energies, which is not fulfilled by most of the traditional density functional methods. This new CAM-QTP(01) functional significantly improves the accuracy of the vertical excitation energies especially for the Rydberg states in the test set. It also reproduces many other properties such as geometries, reaction barrier heights, and atomization energies.

Description: Core excitation energies are computed with time-dependent density functional theory (TD-DFT) using the ionization energy corrected exchange and correlation potential QTP(0,0). QTP(0,0) provides C, N, and O K-edge spectra to about an electron volt. A mean absolute error (MAE) of 0.77 and a maximum error of 2.6 eV is observed for QTP(0,0) for many small molecules. TD-DFT based on QTP (0,0) is then used to describe the core-excitation spectra of the 22 amino acids. TD-DFT with conventional functionals greatly underestimates core excitation energies, largely due to the significant error in the Kohn-Sham occupied eigenvalues. To the contrary, the ionization energy corrected potential, QTP(0,0), provides excellent approximations (MAE of 0.53 eV) for core ionization energies as eigenvalues of the Kohn-Sham equations. As a consequence, core excitation energies are accurately described with QTP(0,0), as are the core ionization energies important in X-ray photoionization spectra or electron spectroscopy for chemical analysis.

Description: Details of crystallization processes of a polymer at the crystallization temperature T c from its melt kept initially at the melt temperature T m depend profoundly on the nature of the initial melt state and often are accompanied by memory effects. This phenomenon is in contrast to small molecular systems where the supercooling ( T m 0 − T c ), with T m 0 being the equilibrium melting temperature, and not ( T m − T c ), determines the nature of crystallization. In addressing this five-decade old puzzle of melt-memory in polymer crystallization, we present a theory to describe melt-memory effects, by invoking an intermediate inhomogeneous melt state in the pathway between the melt and crystalline states. Using newly introduced dissolution temperature T 1 0 for the inhomogeneous melt state and the transition temperature T t 0 for the transition between the inhomogeneous melt and crystalline states, analytical formulas are derived for the nucleation rate as a function of the melt temperature. The theory is general to address different kinds of melt-memory effects depending on whether T m is higher or lower than T m 0 . The derived results are in qualitative agreement with known experimental data, while making predictions for further experiments on melt-memory.

Description: Long-lived spin coherence and rotationally ordered radical pairs have previously been identified as key requirements for the radical pair mechanism of the avian magnetic compass sense. Both criteria are hard to meet in a biological environment, where thermal motion of the radicals creates dynamic disorder and drives efficient spin relaxation. This has long been cited as a major stumbling block of the radical pair hypothesis. Here we combine Redfield relaxation theory with analytical solutions to a rotational diffusion equation to assess the impact of restricted rotational motion of the radicals on the operation of the compass. The effects of such motions are first investigated generally in small, model systems and are then critically examined in the magnetically sensitive flavin-tryptophan radical pair that is formed photochemically in the proposed magnetoreceptor protein, cryptochrome. We conclude that relaxation is slowest when rotational motion of the radicals within the protein is fast and highly constrained; that in a regime of slow relaxation, the motional averaging of hyperfine interactions has the potential to improve the sensitivity of the compass; and that consideration of motional effects can significantly alter the design criteria for an optimal compass. In addition, we demonstrate that motion of the flavin radical is likely to be compatible with its role as a component of a functioning radical-pair compass, whereas the motion of the tryptophan radical is less ideal, unless it is particularly fast.

Description: Bottom-up multiscale techniques are frequently used to develop coarse-grained (CG) models for simulations at extended length and time scales but are often limited by a compromise between computational efficiency and accuracy. The conventional approach to CG nonbonded interactions uses pair potentials which, while computationally efficient, can neglect the inherently multibody contributions of the local environment of a site to its energy, due to degrees of freedom that were coarse-grained out. This effect often causes the CG potential to depend strongly on the overall system density, composition, or other properties, which limits its transferability to states other than the one at which it was parameterized. Here, we propose to incorporate multibody effects into CG potentials through additional nonbonded terms, beyond pair interactions, that depend in a mean-field manner on local densities of different atomic species. This approach is analogous to embedded atom and bond-order models that seek to capture multibody electronic effects in metallic systems. We show that the relative entropy coarse-graining framework offers a systematic route to parameterizing such local density potentials. We then characterize this approach in the development of implicit solvation strategies for interactions between model hydrophobes in an aqueous environment.

Description: C-2U is a high-confinement, advanced beam driven field-reversed configuration plasma experiment which sustains the configuration for 〉5 ms, in excess of typical MHD and fast particle instability times, as well as fast particle slowing down times. Fast particle dynamics are critical to C-2U performance and several diagnostics have been deployed to characterize the fast particle population, including neutron and proton detectors. To increase our understanding of fast particle behavior and supplement existing diagnostics, an E ∥ B neutral particle analyzer was installed, which simultaneously measures H 0 and D 0 flux with large dynamic range and high energy resolution. Here we report the commissioning of the E ∥ B analyzer, confirm the instrument has energy resolution Δ E / E ≲ 0 . 1 and a dynamic range E max / E min ∼ 30 , and present measurements of initial testing on C-2U.

Description: The acoustic signature of an acoustically compact tandem airfoil setup in uniform high-Reynolds number flow is investigated. The upstream airfoil is considered rigid and is actuated at its leading edge with small-amplitude harmonic pitching motion. The downstream airfoil is taken passive and elastic, with its motion forced by the vortex-street excitation of the upstream airfoil. The non-linear near-field description is obtained via potential thin-airfoil theory. It is then applied as a source term into the Powell-Howe acoustic analogy to yield the far-field dipole radiation of the system. To assess the effect of downstream-airfoil elasticity, results are compared with counterpart calculations for a non-elastic setup, where the downstream airfoil is rigid and stationary. Depending on the separation distance between airfoils, airfoil-motion and airfoil-wake dynamics shift between in-phase (synchronized) and counter-phase behaviors. Consequently, downstream airfoil elasticity may act to amplify or suppress sound through the direct contribution of elastic-airfoil motion to the total signal. Resonance-type motion of the elastic airfoil is found when the upstream airfoil is actuated at the least stable eigenfrequency of the downstream structure. This, again, results in system sound amplification or suppression, depending on the separation distance between airfoils. With increasing actuation frequency, the acoustic signal becomes dominated by the direct contribution of the upstream airfoil motion, whereas the relative contribution of the elastic airfoil to the total signature turns negligible.

Description: A computational modeling study of high-voltage nanosecond pulsed microdischarge in xenon gas at 10 atm is presented. The discharge is observed to develop as two streamers originating from the cathode and the anode, and propagating toward each other until they merge to form a single continuous discharge channel. The peak plasma density obtained in the simulations is ∼10 24  m −3 , i.e., the ionization degree of plasma does not exceed 1%. The influence of the initial gas pre-ionization is established. It is seen that an increase in the seeded plasma density results in an increase in the streamer propagation velocity and an increase in the plasma density obtained after the merging of two streamers.

Description: Compact pulsed power system based on compact Marx generator is widely used in terms of drive resistance and capacitive loads. This system usually adopts high performance components such as high energy density capacitors, compact switches, and integrated structure. Traditional compact Marx generator can only output double-exponential pulse profile. In this paper a compact, low-impedance Marx module which can output rectangular pulse profile is design and tested. This module has multiple circuits of different discharge frequencies in parallel to generate quasi-rectangular pulse. Discharge characteristic of an ideal module with infinite branches is calculated theoretically. A module with two branches has been designed and tested. Test results show that the impedance of the module is 1.2 Ω. When charging voltage is 100.6 kV and load resistance is 1 Ω, the peak output pulse is 45.2 kV voltage, the peak power is about 2 GW, the pulse width is about 130 ns, and the rise time is about 35 ns. The energy density and power density of the module are 15 kJ/m 3 and 140 GW/m 3 , respectively.

Description: An optical flux sensor, based on the fluorescence properties of materials and nanoparticles, has been developed to control the deposition rate in thin film deposition systems. Using a simple diode laser and a photomultiplier tube with a light filter, we report the detection of gallium atoms and CdSe-ZnS quantum dots. This setup has a high sensitivity and reproducibility.

Description: The hybrid perovskite CH 3 NH 3 PbI 3 (MAPI) exhibits long minority-carrier lifetimes and diffusion lengths. We show that slow recombination originates from a spin-split indirect-gap. Large internal electric fields act on spin-orbit-coupled band extrema, shifting band-edges to inequivalent wavevectors, making the fundamental gap indirect. From a description of photoluminescence within the quasiparticle self-consistent GW approximation for MAPI, CdTe, and GaAs, we predict carrier lifetime as a function of light intensity and temperature. At operating conditions we find radiative recombination in MAPI is reduced by a factor of more than 350 compared to direct gap behavior. The indirect gap is retained with dynamic disorder.

Description: III-nitride semiconductors hold tremendous promise for realizing high efficiency photoelectrodes. However, previously reported InGaN photoelectrodes generally exhibit very low photocurrent densities, due to the presence of extensive defects, dislocations, and indium phase separation. Here, we show that In 0.5 Ga 0.5 N nanowires with nearly homogeneous indium distribution can be achieved by plasma-assisted molecular beam epitaxy. Under AM1.5G one sun illumination, the InGaN nanowire photoanode exhibits a photocurrent density of 7.3 mA/cm 2 at 1.2 V ( vs . NHE) in 1M HBr. The incident-photon-to-current efficiency is above 10% at 650 nm, which is significantly higher than previously reported values of metal oxide photoelectrodes.

Description: We study the two-dimensional electron gas at the interface of NdTiO 3 and SrTiO 3 to reveal its nanoscale transport properties. At electron densities approaching 10 15 cm −2 , our terahertz spectroscopy data show conductivity levels that are up to six times larger than those extracted from DC electrical measurements. Moreover, the largest conductivity enhancements are observed in samples intentionally grown with larger defect densities. This is a signature of electron transport over the characteristic length-scales typically probed by electrical measurements being significantly affected by scattering by structural defects introduced during growth, and, a trait of a much larger electron mobility at the nanoscale.

Description: Similar to electromagnetism, described by the Maxwell equations, the physics of magnetoelectric (ME) phenomena deals with the fundamental problem of the relationship between electric and magnetic fields. Despite a formal resemblance between the two notions, they concern effects of different natures. In general, ME-coupling effects manifest in numerous macroscopic phenomena in solids with space and time symmetry breakings. Recently, it was shown that the near fields in the proximity of a small ferrite particle with magnetic-dipolar-mode (MDM) oscillations have the space and time symmetry breakings and the topological properties of these fields are different from the topological properties of the free-space electromagnetic fields. Such MDM-originated fields—called magnetoelectric (ME) fields—carry both spin and orbital angular momenta. They are characterized by power-flow vortices and non-zero helicity. In this paper, we report on observation of the topological ME effects in far-field microwave radiation based on a small microwave antenna with a MDM ferrite resonator. We show that the microwave far-field radiation can be manifested with a torsion structure where an angle between the electric and magnetic field vectors varies. We discuss the question on observation of the regions of localized ME energy in far-field microwave radiation.

Description: The epitaxial integration of functional oxides with wide band gap semiconductors offers the possibility of new material systems for electronics and energy conversion applications. We use first principles to consider an epitaxial interface between the correlated metal oxide SrRuO 3 and the wide band gap semiconductor TiO 2 , and assess energy level alignment, interfacial chemistry, and interfacial dipole formation. Due to the ferromagnetic, half-metallic character of SrRuO 3 , according to which only one spin is present at the Fermi level, we demonstrate the existence of a spin dependent band alignment across the interface. For two different terminations of SrRuO 3 , the interface is found to be rectifying with a Schottky barrier of ≈1.3–1.6 eV, in good agreement with experiment. In the minority spin, SrRuO 3 exhibits a Schottky barrier alignment with TiO 2 and our calculated Schottky barrier height is in excellent agreement with previous experimental measurements. For majority spin carriers, we find that SrRuO 3 recovers its exchange splitting gap and bulk-like properties within a few monolayers of the interface. These results demonstrate a possible approach to achieve spin-dependent transport across a heteroepitaxial interface between a functional oxide material and a conventional wide band gap semiconductor.

Description: The aim of this work is to analyze in more depth a model of particle deposition by characterizing different parameters such as profile density, bonds and perimeter, and substrate coverage, all being involved in the description of deposits as bulk. Thus, this study is an extension of a previous work on non-equilibrium interface-growth systems where two different interface-growth models, called Standard Adherence Rule Model and Potential Adherence Rule Model, were characterized. In this work, bulk characterization is implemented for the complete range of Peclet numbers. The zones of density profile (Near-Wall, Plateau, and Active-Growth) are studied by proposing an adjustment for each of them and determining the full-setting density profile depending on the Peclet number. The density profiles are compared with other one- and two-stage models. Furthermore, an algorithm is proposed to calculate the number of bonds of the particles and the perimeter that a substrate forms over time. Finally, to analyze the coating, its temporal behavior is adjusted to an exponential function by comparing the results with those found for Random Sequential Adsorption models which describe systems like colloidal particles on solid substrates, adsorption of proteins at mineral surfaces, or oxidation of one-dimensional polymer chains.

Description: The recently discovered hexagonal ABC -type hyperferroelectrics, in which the polarization persists in the presence of the depolarization filed, exhibit a variety of intriguing and potentially useful properties [Garrity et al ., Phys. Rev. Lett. 112 , 127601 (2014)]. For the existing prototype of LiBeSb, we present detailed first-principles calculations concerning the lattice dynamics, electronic structure, and optical properties. An unstable longitudinal optic mode in the high-symmetry structure and a large polarization of 0.5 C/m 2 in the polar phase are reported, including the remarkable dependence of Born effective charges on structural distortion. Using the HSE06 hybrid functional, we predict that LiBeSb has a small band-gap of 1.5 eV and shows dominant asymmetric covalent bonding character. Importantly, we find that there are remarkable absorptions in the whole visible spectrum. These features, combined with the enhanced carrier mobility, make LiBeSb as well as the whole family of hexagonal ABC -type hyperferroelectrics as promising candidates for ferroelectric photovoltaic materials with large bulk photovoltaic effect in the visible spectrum.

Description: We combine classical nucleation theory with superharmonic focusing to predict necessary pressures to induce nucleation in acoustic droplet vaporization. We show that linear acoustics is a valid approximation to leading order when particle displacements in the sound field are small relative to the radius of the droplet. This is done by perturbation analysis of an axisymmetric compressible inviscid flow about a droplet with small surface perturbations relative to the mean radius subjected to an incoming ultrasonic wave. The necessary nucleation pressure threshold inside the droplet is calculated to be −9.33 ± 0.30 MPa for typical experimental parameters by employing results from classical homogeneous nucleation theory . As a result, we are able to predict if a given incident pressure waveform will induce nucleation.

Description: Resonant dipolar relaxation in poly( ε -caprolactone) (PCL) is reported using thermally stimulated discharge current spectroscopy. PCL is a bio-medically known shape memory polymer having a well defined γ , β , α , and α ′ relaxations, respectively, centered around 125 K, 170 K, 220 K, and 270 K as seen by the measurements. By employing a new protocol variable poling temperature at constant freezing temperature, resonant dipolar relaxation in PCL could be induced, especially in the vicinity of α relaxation. Such a protocol is useful in de-convoluting the features in a more meaningful fashion. By an analysis of activation process, we could show a clear contrast enhancement of the dynamics of the participating dipoles by means of a minimum in the activation energies situated around the glass transition region. The relevant parameters of interest such as activation energies and relaxation times are estimated and discussed.

Description: We report the growth of thin films of the mixed valence compound YbAl 3 on MgO using molecular-beam epitaxy. Employing an aluminum buffer layer, epitaxial (001) films can be grown with sub-nm surface roughness. Using x-ray diffraction, in situ low-energy electron diffraction, and aberration-corrected scanning transmission electron microscopy, we establish that the films are ordered in the bulk as well as at the surface. Our films show a coherence temperature of 37 K, comparable to that reported for bulk single crystals. Photoelectron spectroscopy reveals contributions from both f 13 and f 12 final states establishing that YbAl 3 is a mixed valence compound and shows the presence of a Kondo Resonance peak near the Fermi-level.

Description: In this work, a new rigid-nonpolarizable model of methanol is proposed. The model has three sites, located at the same positions as those used in the OPLS model previously proposed by Jorgensen [J. Phys. Chem. 90 , 1276 (1986)]. However, partial charges and the values of the Lennard-Jones parameters were modified by fitting to an adequately selected set of target properties including solid-fluid experimental data. The new model was denoted as OPLS/2016. The overall performance of this model was evaluated and compared to that obtained with other popular models of methanol using a similar test to that recently proposed for water models. In the test, a certain numerical score is given to each model. It was found that the OPLS/2016 obtained the highest score (7.4 of a maximum of 10) followed by L1 (6.6), L2 (6.4), OPLS (5.8), and H1 (3.5) models. The improvement of OPLS/2016 with respect to L1 and L2 is mainly due to an improvement in the description of fluid-solid equilibria (the melting point is only 14 K higher than the experimental value). In addition, it was found that no methanol model was able to reproduce the static dielectric constant and the isobaric heat capacity, whereas the better global performance was found for models that reproduce the vaporization enthalpy once the so-called polarization term is included. Similar conclusions were suggested previously in the analysis of water models and are confirmed here for methanol.

Description: We investigate the link between dynamic localization, characterized by the Debye–Waller factor, 〈 u 2 〉, and solute self-diffusivity, D , in a polymer system using atomistic molecular dynamics simulations and vapor sorption experiments. We find a linear relationship between ln D and 1/〈 u 2 〉 over more than four decades of D , encompassing most of the glass formation regime. The observed linearity is consistent with the Langevin dynamics in a periodically varying potential field and may offer a means to rapidly assess diffusion based on the characterization of dynamic localization.

Description: An improved method for characterizing the magnetic anisotropy of films with cubic symmetry is described and is applied to an yttrium iron garnet (111) film. Analysis of the ferromagnetic resonance (FMR) spectra performed both in-plane and out-of-plane from 0.7 to 8 GHz yielded the magnetic anisotropy constants as well as the saturation magnetization. The field at which FMR is observed turns out to be quite sensitive to anisotropy constants (by more than a factor ten) in the low frequency (

Description: It is general wisdom that the pair potential of charged colloids in a liquid may be closely approximated by a Yukawa interaction, as predicted by the classical Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. We experimentally determine the effective forces in a binary mixture of like-charged particles, of species 1 and 2, with blinking optical tweezers. The measured forces are consistent with a Yukawa pair potential but the (12) cross-interaction is not equal to the geometric mean of the (11) and (22) like-interactions, as expected from DLVO. The deviation is a function of the electrostatic screening length and the size ratio, with the cross-interaction measured being consistently weaker than DLVO predictions. The corresponding non-additivity parameter is negative and grows in magnitude with increased size asymmetry.

Description: One of the mechanisms for generating electromagnetic plasma waves (Z-mode and LO-mode) is mode conversion from electrostatic waves into electromagnetic waves in inhomogeneous plasma. Herein, we study a condition required for mode conversion of electrostatic waves propagating purely perpendicular to the ambient magnetic field, by numerically solving the full dispersion relation. An approximate model is derived describing the coupling between electrostatic waves (hot plasma Bernstein mode) and Z-mode waves at the upper hybrid frequency. The model is used to study conditions required for mode conversion from electrostatic waves (electrostatic electron cyclotron harmonic waves, including Bernstein mode) into electromagnetic plasma waves (LO-mode). It is shown that for mode conversion to occur in inhomogeneous plasma, the angle between the boundary surface and the magnetic field vector should be within a specific range. The range of the angle depends on the norm of the k vector of waves at the site of mode conversion in the inhomogeneous region. The present study reveals that inhomogeneity alone is not a sufficient condition for mode conversion from electrostatic waves to electromagnetic plasma waves and that the angle between the magnetic field and the density gradient plays an important role in the conversion process.

Description: Bubble size distributions in cloud cavitation are important in cavitating flows. In this study, a numerical model was developed to study the evolution of the internal structure of cloud cavitation. The model includes (1) an evolution equation of bubble number density, which considers the bubble breakup effect and (2) the multiphase Reynolds-averaged Navier–Stokes equations with a modified cavitation model for background cavitating flows. The proposed model was validated with a flow over a projectile. Results show that the numerical model can predict the evolution of the internal structure of cloud cavitation. Comparisons of the proposed model and Singhal model were discussed. The effects of re-entrant jet and bubble number density on cavitating flows were also investigated.

Description: This paper presents two key contributions; the first concerns the development of analytical expressions for the axial and transverse acoustic radiation forces exerted on a 2D rigid elliptical cylinder placed in the field of plane progressive, quasi-standing, or standing waves with arbitrary incidence. The second emphasis is on the acoustic radiation torque per length. The rigid elliptical cylinder case is important to be considered as a first-order approximation of the behavior of a cylindrical fluid column trapped in air because of the significant acoustic impedance mismatch at the particle boundary. Based on the rigorous partial-wave series expansion method in cylindrical coordinates, non-dimensional acoustic radiation force and torque functions are derived and defined in terms of the scattering coefficients of the elliptic cylinder. A coupled system of linear equations is obtained after applying the Neumann boundary condition for an immovable surface in a non-viscous fluid and solved numerically by matrix inversion after performing a single numerical integration procedure. Computational results for the non-dimensional force components and torque, showing the transition from the progressive to the (equi-amplitude) standing wave behavior, are performed with particular emphasis on the aspect ratio a / b , where a and b are the semi-axes of the ellipse, the dimensionless size parameter, as well as the angle of incidence ranging from end-on to broadside incidence. The results show that the elliptical geometry has a direct influence on the radiation force and torque, so that the standard theory for circular cylinders (at normal incidence) leads to significant miscalculations when the cylinder cross section becomes non-circular. Moreover, the elliptical cylinder experiences, in addition to the acoustic radiation force, a radiation torque that vanishes for the circular cylinder case. The application of the formalism presented here may be extended to other 2D surfaces of arbitrary shape, such as Chebyshev cylindrical particles with a small deformation, stadiums (with oval shape), or other non-circular geometries.

Description: We report the discovery of an envelope Hamiltonian describing the charged-particle dynamics in general linear coupled lattices.

Description: Alloying in the system Cu 2 ZnSnSe 4 –CuInSe 2 –ZnSe (CZTISe) is investigated experimentally and theoretically. The goal is to distinguish single-phase and multi-phase regions within the Cu 2 ZnSnSe 4 -2CuInSe 2 -4ZnSe pseudo-ternary phase diagram. CZTISe thin films are prepared by co-evaporation of the chemical elements and are investigated in real-time during growth using in situ angle dispersive X-ray diffraction. The focus is mainly on thin films along the Cu 2 ZnSnSe 4 –2CuInSe 2 isopleth with small ZnSe addition as well as on films along the Cu 2 ZnSnSe 4 -4ZnSe isopleth with small CuInSe 2 addition. For both cases, ab initio calculations with density-functional theory are performed to estimate the stability of the alloy with respect to the formation of secondary phases. Both in experiment and calculation, we find a surprisingly large single-phase region in the Cu 2 ZnSnSe 4 corner of the pseudo-ternary phase diagram slightly off the Cu 2 ZnSnSe 4 -4ZnSe isopleth. This may help avoiding secondary phase formation under Zn-rich conditions and open up new possibilities for the application of CZTISe thin films in solar cells.

Description: An AlN barrier high electron mobility transistor (HEMT) based on the AlN/Al 0.85 Ga 0.15 N heterostructure was grown, fabricated, and electrically characterized, thereby extending the range of Al composition and bandgap for AlGaN channel HEMTs. An etch and regrowth procedure was implemented for source and drain contact formation. A breakdown voltage of 810 V was achieved without a gate insulator or field plate. Excellent gate leakage characteristics enabled a high I on /I off current ratio greater than 10 7 and an excellent subthreshold slope of 75 mV/decade. A large Schottky barrier height of 1.74 eV contributed to these results. The room temperature voltage-dependent 3-terminal off-state drain current was adequately modeled with Frenkel-Poole emission.

Description: We investigate spin-current transport with an antiferromagnetic insulator NiO thin layer by means of the spin-Hall magnetoresistance (SMR) over a wide range of temperature in Pt/NiO/Y 3 Fe 5 O 12 (Pt/NiO/YIG) heterostructures. The SMR signal is comparable to that without the NiO layer as long as the temperature is near or above the blocking temperature of the NiO, indicating that the magnetic fluctuation of the insulating NiO is essential for transmitting the spin current from the Pt to YIG layer. On the other hand, the SMR signal becomes negligibly small at low temperature, and both conventional anisotropic magnetoresistance and the anomalous Hall resistance are extremely small at any temperature, implying that the insertion of the NiO has completely suppressed the Pt magnetization induced by the YIG magnetic proximity effect (MPE). The dual roles of the thin NiO layer are, to suppress the magnetic interaction or MPE between Pt and YIG, and to maintain efficient spin current transmission at high temperature.

Description: We have investigated the detailed magnetic, magnetoelectric (ME), magnetodielectric (MD) and thermal expansion properties in Co 4 Nb 2 O 9 crystal. A magnetic-field-induced spin flop was observed below antiferromagnetic (AFM) transition temperature T N . Dielectric constant at applied magnetic field nearly diverges around the AFM transition, giving rise to a colossal MD effect as high as ∼138% around T N . Theoretical analysis of the ME and MD data revealed a major contribution of critical spin fluctuation to the colossal MD effect in Co 4 Nb 2 O 9 . These results suggest that linear ME materials with large ME coupling might be potentially used to realize large MD effect for future application.

Description: GaAsP on Si tandem cells represent a promising path towards achieving high efficiency while leveraging the Si solar knowledge base and low-cost infrastructure. However, dislocation densities exceeding 10 8  cm −2 in GaAsP cells on Si have historically hampered the efficiency of such approaches. Here, we report the achievement of low threading dislocation density values of 4.0–4.6 × 10 6  cm −2 in GaAsP solar cells on GaP/Si, comparable with more established metamorphic solar cells on GaAs. Our GaAsP solar cells on GaP/Si exhibit high open-circuit voltage and quantum efficiency, allowing them to significantly surpass the power conversion efficiency of previous devices. The results in this work show a realistic path towards dual-junction GaAsP on Si cells with efficiencies exceeding 30%.

Description: The energy landscape of Zr at high hydrostatic pressure suggests that its transformation behavior is strongly pressure dependent. This is in contrast to the known transition mechanism in Ti, which is essentially independent of hydrostatic pressure. Generalized solid-state nudged elastic band calculations at constant pressure shows that α-Zr transforms like Ti only at the lowest pressure inside the stability field of ω-phase. Different pathways apply at higher pressures where the energy landscape contains several high barriers so that metastable states are expected, including the appearance of a transient bcc phase at ca. 23 GPa. The global driving force for the hcp-ω transition increases strongly with increasing pressure and reaches 23.7 meV/atom at 23 GPa. Much of this energy relates to the excess volume of the hcp phase compared with its ω phase.

Description: We investigated the structure and magneto-transport properties of magnetic junctions using a Co 2 Fe(Ga 0.5 Ge 0.5 ) Heusler alloy as ferromagnetic electrodes and a Cu(In 0.8 Ga 0.2 )Se 2 (CIGS) semiconductor as spacers. Owing to the semiconducting nature of the CIGS spacer, large magnetoresistance (MR) ratios of 40% at room temperature and 100% at 8 K were obtained for low resistance-area product ( RA ) values between 0.3 and 3 Ω  μ m 2 . Transmission electron microscopy observations confirmed the fully epitaxial growth of the chalcopyrite CIGS layer, and the temperature dependence of RA indicated that the large MR was due to spin dependent tunneling.

Description: In this study, we present the experimental observation that polycrystalline Mn 2+x Fe 1−x Ga (x = −0.2, 0, 0.2, 0.4) compounds can be synthesized to be D0 19 -type (Ni 3 Sn-type) hexagonal structure with space group P63/mmc. A giant exchange bias field up to 1.32 kOe was achieved in hexagonal Mn 2 FeGa alloy at 5 K. A cluster glass state is confirmed by ac susceptibility measurement under different driving frequencies. Interestingly, robust horizontal and vertical shifts in magnetic hysteresis loop were simultaneously observed at 5 K under high cooling field up to 90 kOe. The large exchange bias is originated from the large exchange anisotropy between cluster glass phase and ferrimagnetic matrix. The vertical shift is thought to be attributed to the incomplete reversal of frozen cluster spins.

Description: Radiation tolerance is a critical performance criterion of photovoltaic devices for space power applications. In this paper we demonstrate the intrinsic radiation tolerance of an ultra-thin solar cell geometry. Device characteristics of GaAs solar cells with absorber layer thicknesses 80 nm and 800 nm were compared before and after 3 MeV proton irradiation. Both cells showed a similar degradation in V oc with increasing fluence; however, the 80 nm cell showed no degradation in I sc for fluences up to 10 14  p + cm −2 . For the same exposure, the I sc of the 800 nm cell had severely degraded leaving a remaining factor of 0.26.

Description: Indium nitride (InN) is potentially suitable for the fabrication of high performance thin-film transistors (TFTs) because of its high electron mobility and peak electron velocity. However, InN is usually grown using a high temperature growth process, which is incompatible with large-area and lightweight TFT substrates. In this study, we report on the room temperature growth of InN films on flexible polyimide sheets using pulsed sputtering deposition. In addition, we report on the fabrication of InN-based TFTs on flexible polyimide sheets and the operation of these devices.

Description: Molecular dynamic simulations of Y 2 O 3 in bcc Fe and transmission electron microscopy (TEM) observations were used to understand the structure of Y 2 O 3 nano-clusters in an oxide dispersion strengthened steel matrix. The study showed that Y 2 O 3 nano-clusters below 2 nm were completely disordered. Y 2 O 3 nano-clusters above 2 nm, however, form a core-shell structure, with a shell thickness of 0.5–0.7 nm that is independent of nano-cluster size. Y 2 O 3 nano-clusters were surrounded by off-lattice Fe atoms, further increasing the stability of these nano-clusters. TEM was used to corroborate our simulation results and showed a crossover from a disordered nano-cluster to a core-shell structure.

Description: In n-type Czochralski silicon (Cz-Si) wafer, swirl shaped regions with low lifetime (known as striations) can cause degradation up to 1% absolute or even more in homojunction industrial solar cells. Nevertheless, the nature of the defects responsible for the occurrence of these striations is still unclear. In this work, n-type Cz-Si solar cell precursors cut from industrial size ingots with different feedstock quality and oxygen content were analyzed by microwave photo-conductance decay and photoluminescence in order to investigate the nature of such defects. The results demonstrate that the defects responsible for the occurrence of striations are oxide nanoprecipitates formed during the high temperature steps for the solar cell realization, due to the presence of grown-in oxygen nuclei.

Description: Sensitive visualization and conformational control of long, delicate biopolymers present critical challenges to emerging biotechnologies and biophysical studies. Next-generation nanofluidic manipulation platforms strive to maintain the structural integrity of genomic DNA prior to analysis but can face challenges in device clogging, molecular breakage, and single-label detection. We address these challenges by integrating the Convex Lens-induced Confinement (CLiC) technique with a suite of nanotopographies embedded within thin-glass nanofluidic chambers. We gently load DNA polymers into open-face nanogrooves in linear, concentric circular, and ring array formats and perform imaging with single-fluorophore sensitivity. We use ring-shaped nanogrooves to access and visualize confinement-enhanced self-ligation of long DNA polymers. We use concentric circular nanogrooves to enable hour-long observations of polymers at constant confinement in a geometry which eliminates the confinement gradient which causes drift and can alter molecular conformations and interactions. Taken together, this work opens doors to myriad biophysical studies and biotechnologies which operate on the nanoscale.

Description: A general, substrate-independent method for plasma deposition of nanostructured, crystalline metal oxides is presented. The technique uses a flow-through, micro-hollow cathode plasma discharge (supersonic microplasma jet) with a “remote” ring anode to deliver a highly directed flux of growth species to the substrate. A diverse range of nanostructured materials (e.g., CuO, α-Fe 2 O 3 , and NiO) can be deposited on any room temperature surface, e.g., conductors, insulators, plastics, fibers, and patterned surfaces, in a conformal fashion. The effects of deposition conditions, substrate type, and patterning on film morphology, nanostructure, and surface coverage are highlighted. The synthesis approach presented herein provides a general and tunable method to deposit a variety of functional and hierarchical metal oxide materials on many different surfaces. High surface area, conversion-type CuO electrodes for Li-ion batteries are demonstrated as a proof-of-concept example.

Description: We discuss the effects of built-in fields and contact configuration on the photovoltaic characteristics of ultra-thin GaAs solar cells. The investigation is based on advanced quantum-kinetic simulations reaching beyond the standard semi-classical bulk picture concerning the consideration of charge carrier states and dynamics in complex potential profiles. The thickness dependence of dark and photocurrent in the ultra-scaled regime is related to the corresponding variation of both, the built-in electric fields and associated modification of the density of states, and the optical intensity in the films. Losses in open-circuit voltage and short-circuit current due to the leakage of electronically and optically injected carriers at minority carrier contacts are investigated for different contact configurations including electron and hole blocking barrier layers. The microscopic picture of leakage currents is connected to the effect of finite surface recombination velocities in the semi-classical description, and the impact of these non-classical contact regions on carrier generation and extraction is analyzed.

Description: Recent defect calculations suggest that the open circuit voltage of CuGaSe 2 solar cells can be limited by deep intrinsic electron traps by Ga Cu antisites and their complexes with Cu-vacancies. To gain experimental evidence, two radiative defect transitions at 1.10 eV and 1.24 eV are characterized by steady-state photoluminescence on epitaxial-grown CuGaSe 2 thin films. Cu-rich samples are studied, since they show highest crystal quality, exciton luminescence, and no potential fluctuations. Variations of the laser intensity and temperature dependent measurements suggest that emission occurs from two deep donor-like levels into the same shallow acceptor. At 10 K, power-law exponents of 1 (low excitation regime) and 1/2 (high excitation regime) are observed identically for both transitions. The theory and a fitting function for the double power law is derived. It is concluded that the acceptor becomes saturated by excess carriers which changes the exponent of all transitions. Activation energies determined from the temperature quenching depend on the excitation level and show unexpected values of 600 meV and higher. The thermal activation of non-radiative processes can explain the distortion of the ionization energies. Both the deep levels play a major role as radiative and non-radiative recombination centers for electrons and can be detrimental for photovoltaic applications.

Description: We found that nanosized graphene sheets enhanced the photoelectric behavior of graphene sheets embedded carbon (GSEC) film on p-silicon substrate, which was deposited under low energy electron irradiation in electron cyclotron resonance plasma. The GSEC/p-Si photodiode exhibited good photoelectric performance with photoresponsivity of 206 mA/W, rise and fall time of 2.2, and 4.3  μ s for near-infrared (850 nm) light. The origin of the strong photoelectric behavior of GSEC film was ascribed to the appearance of graphene nanosheets, which led to higher barrier height and photoexcited electron-collection efficiency. This finding indicates that GSEC film has the potential for photoelectric applications.

Description: We design and implement 3D-lumped element microwave cavities that spatially focus magnetic fields to a small mode volume. They allow coherent and uniform coupling to electron spins hosted by nitrogen vacancy centers in diamond. We achieve large homogeneous single spin coupling rates, with an enhancement of more than one order of magnitude compared to standard 3D cavities with a fundamental resonance at 3 GHz. Finite element simulations confirm that the magnetic field distribution is homogeneous throughout the entire sample volume, with a root mean square deviation of 1.54%. With a sample containing 10 17 nitrogen vacancy electron spins, we achieve a collective coupling strength of Ω = 12 MHz, a cooperativity factor C = 27, and clearly enter the strong coupling regime. This allows to interface a macroscopic spin ensemble with microwave circuits, and the homogeneous Rabi frequency paves the way to manipulate the full ensemble population in a coherent way.

Description: For macroscopically manipulating heat flow at will, thermal metamaterials have opened a practical way, which possesses a single function, such as either cloaking or concentrating the flow of heat even though environmental temperature varies. By developing a theory of transformation heat transfer for multiple functions, here we introduce the concept of intelligent thermal metamaterials with a dual function, which is in contrast to the existing thermal metamaterials with single functions. By assembling homogeneous isotropic materials and shape-memory alloys, we experimentally fabricate a kind of intelligent thermal metamaterials, which can automatically change from a cloak (or concentrator) to a concentrator (or cloak) when the environmental temperature changes. This work paves an efficient way for a controllable gradient of heat, and also provides guidance both for arbitrarily manipulating the flow of heat and for efficiently designing similar intelligent metamaterials in other fields.

Description: We have directly probed the dynamic behavior of a single ferromagnetic disk as a function of neighboring disk interactions and lattice configurations using micro-focused Brillouin light scattering spectroscopy. At high field, when the disks are in the single domain state, the dynamic behavior of the disk under probe is strongly influenced by the neighboring disk configurations due to magnetostatic interactions. In particular, the changing landscape of dipolar field from neighboring disks as a function of lattice configurations plays a key role in modifying the resultant internal field of the disk under probe. When the disks are in the vortex state at remanence, the effects of dipolar fields on the disk under probe vanish resulting in a negligible configurational anisotropy. Micromagnetic simulations and stray field models are in good agreement with the experimental results.

Description: Combining experiment and theory, we investigate how a naturally created heterojunction ( pn junction) at a graphene and metallic contact interface is modulated via interaction with molecular hydrogen (H 2 ). Due to an electrostatic interaction, metallic electrodes induce pn junctions in graphene, leading to an asymmetrical resistance in electronic transport for electrons and holes. We report that the asymmetry in the resistance can be tuned in a reversible manner by exposing graphene devices to H 2 . The interaction between the H 2 and graphene occurs solely at the graphene-contact pn junction and induces a modification on the electrostatic interaction between graphene and metallic contacts. We explain the experimental data with theory providing information concerning the length of the heterojunction and how it changes as a function of H 2 adsorption. Our results are valuable for understanding the nature of the metal-graphene interfaces and have potential application for selective sensors of molecular hydrogen.

Description: We present a design of multilayer core-shell nanostructures formed by introducing a dielectric gap shell layer between a silver core and a monolayer graphene shell for spectrally selective absorption enhancement in graphene based on an unconventional Fano effect. We demonstrate that this mechanism enables great flexibility in the choice of parameters of the proposed structures for the achievement of a relatively large and narrow-band absorption enhancement in graphene. Furthermore, we also demonstrate that such a spectrally selective absorption enhancement in graphene is highly tunable and can be optimized by controlling either the core or the shell parameters. These unique absorption properties may have applications in color-selective photodetectors and image sensors.

Description: In this study, we present the influence of the embedding matrix on the relaxation of Fe(phen) 2 (NCS) 2 (phen = 1,10-phenanthroline) spin-transition microparticles as revealed by experiments and provide an explanation within the framework of an elastic model based on a Monte-Carlo method. Experiments show that the shape of the high-spin → low-spin relaxation curves is drastically changed when the particles are dispersed in glycerol. This effect was considered in the model by means of interactions between the microparticles and the matrix. A faster start of the relaxation for microparticles embedded in glycerol is due to an initial positive local pressure acting on the edge spin-crossover molecules from the matrix side. This local pressure diminishes and eventually becomes negative during relaxation, as an effect of the decrease of the volume of spin-crossover microparticles from high-spin to low-spin.

Description: We present a method of forming shallow p- doping on a 4H-SiC surface by depositing a thin Al layer ( d  = 5 nm) and then thermally annealing it at 1000 °C for 10 min. A secondary ion mass spectrometry analysis of the annealed Al/SiC sample reveals an Al concentration in excess of 10 17  cm −3 up to a depth of d ≤ 250 nm. I–V measurements and CV characterizations of Ti-SiC Schottky barrier diodes (SBDs) fabricated on a n- type SiC epi-wafer indicate that the shallow Al doping increases the built-in potential of the junction and the barrier height by Δ V b i = 0.51   eV and Δ ϕ B = 0.26   eV , respectively. Assuming a rectangular doping profile, calculations of the built-in voltage shift and the Schottky barrier height indicate that partial dopant activation ( activation ratio ∼ 2%) can induce the observed barrier height shift. The shallow doping method was then used to fabricate junction terminations in SBDs which increased the breakdown voltage and reduced the reverse leakage current. Technology CAD simulations of the SBD with and without doping verify that a reduction of peak electric field can explain the improvement of the breakdown voltage.

Description: We report on the detection of structural inhomogeneity across anode and cathode interfaces in electrically degraded reduced and oxidized Fe -doped SrTiO 3 (Fe:STO) single crystals by optical second harmonic generation (SHG) spectroscopy. SHG spectra were collected from several regions across the anode and cathode interfaces in both degraded reduced and oxidized Fe:STO crystals. We identify the formation of defect concentration gradients along both degraded reduced and oxidized anode interfaces. While the broken symmetries decrease from the outer region towards the central region of the reduced anode, the opposite trend is seen in the degraded oxidized anode. These results are attributed to the formation of centrosymmetric Fe 4+ :Ti 4+ -O 6 octahedral structures in the central region of the reduced sample's degraded anode and non-centrosymmetric Jahn-Teller distortions in the central region of the oxidized sample's degraded anode. The observed changes in SHG intensity from the outer region towards the central region of the degraded cathode interfaces is accompanied by a structural phase transition in the inner and outer regions, marked by strong changes to the s- polarized intensity spectra. We explain the SHG intensity changes by the formation of lower order symmetry Fe 3+ :Ti 3+ -O 6 structures in the outer region and a modification of the second-order nonlinear susceptibility near the central regions due to the clustering of dissociated oxygen vacancies. These significant structural and spatial inhomogeneities are linked directly to the field-driven migration of oxygen ions and vacancies.

Description: The total electrostatic energy of systems of identical particles of equal charge is studied in configurations bounded in space, but divergent in the number of charges. This approach shall guide us to unveil a non-linear, functional form specifying the divergent nature of system energy. We consider fractals to be physical entities, with charges located in their vertices or nodes. This description is interesting since features, such as the corresponding fractal dimension, can characterize the total energy E N . Finally, at local length scales, we describe how energy diverges at charge accumulation points in the fractal, that is, almost everywhere by definition.

Description: The Kuramoto–Sakaguchi system of coupled phase oscillators, where interaction between oscillators is determined by a single harmonic of phase differences of pairs of oscillators, has very simple emergent dynamics in the case of identical oscillators that are globally coupled: there is a variational structure that means the only attractors are full synchrony (in-phase) or splay phase (rotating wave/full asynchrony) oscillations and the bifurcation between these states is highly degenerate. Here we show that nonpairwise coupling—including three and four-way interactions of the oscillator phases—that appears generically at the next order in normal-form based calculations can give rise to complex emergent dynamics in symmetric phase oscillator networks. In particular, we show that chaos can appear in the smallest possible dimension of four coupled phase oscillators for a range of parameter values.

Description: Radiochromic films (RCF) are commonly used in dosimetry for a wide range of radiation sources (electrons, protons, and photons) for medical, industrial, and scientific applications. They are multi-layered, which includes plastic substrate layers and sensitive layers that incorporate a radiation-sensitive dye. Quantitative dose can be retrieved by digitizing the film, provided that a prior calibration exists. Here, to calibrate the newly developed EBT3 and HDv2 RCFs from Gafchromic™, we used the Stanford Medical LINAC to deposit in the films various doses of 10 MeV photons, and by scanning the films using three independent EPSON Precision 2450 scanners, three independent EPSON V750 scanners, and two independent EPSON 11000XL scanners. The films were scanned in separate RGB channels, as well as in black and white, and film orientation was varied. We found that the green channel of the RGB scan and the grayscale channel are in fact quite consistent over the different models of the scanner, although this comes at the cost of a reduction in sensitivity (by a factor ∼2.5 compared to the red channel). To allow any user to extend the absolute calibration reported here to any other scanner, we furthermore provide a calibration curve of the EPSON 2450 scanner based on absolutely calibrated, commercially available, optical density filters.

Description: The anode pulse of a photomultiplier tube (PMT) coupled with a scintillator is used for pulse shape discrimination (PSD) analysis. We have developed a novel emulation technique for the PMT anode pulse based on optical photon transport and a PMT response function. The photon transport was calculated using Geant4 Monte Carlo code and the response function with a BC408 organic scintillator. The obtained percentage RMS value of the difference between the measured and simulated pulse with suitable scintillation properties using GSO:Ce (0.4, 1.0, 1.5 mol%), LaBr 3 :Ce and BGO scintillators were 2.41%, 2.58%, 2.16%, 2.01%, and 3.32%, respectively. The proposed technique demonstrates high reproducibility of the measured pulse and can be applied to simulation studies of various radiation measurements.

Description: In this study, fullerene like carbon (FL-C) is introduced in hydrogenated amorphous carbon (a-C:H) film by employing a direct current plasma enhanced chemical vapor deposition. The film has a low friction and wear, such as 0.011 and 2.3 × 10 −9 mm 3 /N m in the N 2 , and 0.014 and 8.4 × 10 −8 mm 3 /N m in the humid air, and high hardness and elasticity (25.8 GPa and 83.1%), to make further engineering applications in practice. It has several nanometers ordered domains consisting of less frequently cross-linked graphitic sheet stacks. We provide new evidences for understanding the reported Raman fit model involving four vibrational frequencies from five, six, and seven C-atom rings of FL-C structures, and discuss the structure evolution before or after friction according to the change in the 1200 cm −1 Raman band intensity caused by five- and seven-carbon rings. Friction inevitably facilitates the transformation of carbon into FL-C nanostructures, namely, the ultra low friction comes from both such structures within the carbon film and the sliding induced at friction interface.

Description: It was shown that drilling of multi-layered target placed in the air by tightly focused femtosecond laser radiation with high fluence (up to 1000 J/cm 2 ) can be monitored online using plasma-induced X-ray emission and second harmonic of incident laser radiation. The technique based on X-rays registration is appeared to be more flexible than the method based on detection of second harmonic since its accuracy depends crucially on the target type. We demonstrated that the X-ray signal clearly indicates the transition from one layer to another during the microdrilling of targets consisting of 2–4 layers of titanium foil when a laser beam is focused beneath the target surface at a depth comparable to the layer thickness. The diagnostics of microchannel production in the chicken eggshell was performed for the first time. It was found that the presence of albumen beneath the shell accounts for longtime generation of X-ray pulses.

Description: This work reports on the effects of a deep high-dose hydrogen ion implant on damage accumulation, defect retention, and silver diffusion in silver implanted ZnO crystals. Single-crystal ZnO samples were implanted with Ag ions in a region ∼150 nm within the surface, and some of these samples were additionally implanted with hydrogen ions to a dose of 2 × 10 16  cm −2 , close to the depth ∼250 nm. Rutherford backscattering/ion channeling measurements show that crystal damage caused by Ag ion implantation and the amount of defects retained in the near surface region following post-implantation annealing were found to diminish in the case with the H implantation. On the other hand, the additional H ion implantation resulted in a reduction of substitutional Ag atoms upon post-implantation annealing. Furthermore, the presence of H also modified the diffusion properties of Ag atoms in ZnO. We discuss these findings in the context of the effects of nano-cavities on formation and annihilation of point defects as well as on impurity diffusion and trapping in ZnO crystals.

Description: The formation and evolution of spin wave band gaps in the transmission spectrum of a magnonic crystal have been studied. A time and space resolved magneto inductive probing system has been used to map the spin wave propagation and evolution in a geometrically structured yttrium iron garnet film. Experiments have been carried out using (1) a chemically etched magnonic crystal supporting the propagation of magnetostatic surface spin waves, (2) a short microwave pulsed excitation of the spin waves, and (3) direct spin wave detection using a movable magneto inductive probe connected to a synchronized fast oscilloscope. The results show that the periodic structure not only modifies the spectra of the transmitted spin waves but also influences the distribution of the spin wave energy inside the magnonic crystal as a function of the position and the transmitted frequency. These results comprise an experimental confirmation of Bloch′s theorem in a spin wave system and demonstrate good agreement with theoretical observations in analogue phononic and photonic systems. Theoretical prediction of the structured transmission spectra is achieved using a simple model based on microwave transmission lines theory. Here, a spin wave system illustrates in detail the evolution of a much more general physical concept: the band gap.

Description: The 8-band k · p parameters which include the direct band coupling between the conduction and the valence bands are derived and used to model optical intersubband transitions in Ge quantum well heterostructure material grown on Si substrates. Whilst for Si rich quantum wells the coupling between the conduction bands and valence bands is not important for accurate modelling, the present work demonstrates that the inclusion of such coupling is essential to accurately determine intersubband transitions between hole states in Ge and Ge-rich Si 1− x Ge x quantum wells. This is due to the direct bandgap being far smaller in energy in Ge compared to Si. Compositional bowing parameters for a range of the key modelling input parameters required for Ge/SiGe heterostructures, including the Kane matrix elements, the effective mass of the Γ 2 ′ conduction band, and the Dresselhaus parameters for both 6- and 8-band k · p modelling, have been determined. These have been used to understand valence band intersubband transitions in a range of Ge quantum well intersubband photodetector devices in the mid-infrared wavelength range.

Description: Rare-earth orthoniobates constitute a class of materials that has been exploited due to their interesting physical properties depending on the lanthanide element. Besides paramagnetism, ferroelasticity, and negative compressibility, these materials are known by their interesting optical properties and mixed types of conduction processes (protonic, ionic, and electronic). In this work, two types of SmNbO 4 samples were studied: polycrystalline samples, prepared by a sol-gel route using the Pechini method, and single crystalline fibres grown by the Laser Floating Zone technique. These samples were structurally characterized based on powder and single-crystal X-ray diffraction studies. A metastable tetragonal phase, stabilized by grain size, was identified in the synthesized powders. After a sintering process of such powders, a single monoclinic phase was obtained. Complementarily, scanning electron microscopy and Raman spectroscopy analyses were performed to these samples. Photoluminescence and photoluminescence excitation spectroscopic studies allowed identifying more than one optically active centre of the trivalent samarium ion in the analysed material. Impedance spectroscopy measurements have shown a large variation of the ac conductivity as a function of temperature, assigned to a protonic conduction and to native ionic conduction mechanisms.

Description: A series of polycrystalline YMn 1−x Ru x O 3 (0 ≤ x ≤ 0.2) samples were prepared by traditional solid-state reaction method. Effects of doping on the microstructures and magnetic properties were investigated. Microstructural results reveal that samples crystallize in a single hexagonal structure with P 6 3 cm group for x ≤ 0.1. Lattice parameters a, c, and unit-cell volume of YMn 1−x Ru x O 3 are found to increase with doping content, which are ascribed to the larger radius of Ru 3+ than that of Mn 3+ . Weak ferromagnetism is found and is enhanced with increasing doping concentration x. The bond angles of Mn-O3-Mn and Mn-O4-Mn are changed in the opposite trends, which break the Mn-Mn exchange interaction, thus the antiferromagnetic ordering. The MnO 5 bipyramid is found to be relieved and the trimerization of Mn ions is weakened. These structural modifications result in the increase of weak ferromagnetism ordering in samples.

Description: To increase the thermoelectric efficiency and reduce the thermal fatigue upon cyclic heat loading, alloying of amorphous NbO 2 with all 3d and 5d transition metals has systematically been investigated using density functional theory. It was found that Ta fulfills the key design criteria, namely, enhancement of the Seebeck coefficient and positive Cauchy pressure (ductility gauge). These quantum mechanical predictions were validated by assessing the thermoelectric and elastic properties on combinatorial thin films, which is a high-throughput approach. The maximum power factor is 2813  μ W m −1  K −2 for the Ta/Nb ratio of 0.25, which is a hundredfold increment compared to pure NbO 2 and exceeds many oxide thermoelectrics. Based on the elasticity measurements, the consistency between theory and experiment for the Cauchy pressure was attained within 2%. On the basis of the electronic structure analysis, these configurations can be perceived as metallic, which is consistent with low electrical resistivity and ductile behavior. Furthermore, a pronounced quantum confinement effect occurs, which is identified as the physical origin for the Seebeck coefficient enhancement.

Description: We investigated the optical properties of wurtzite (WZ) GaP nanowires by performing photoluminescence (PL) and time-resolved PL measurements in the temperature range from 4 K to 300 K, together with atom probe tomography to identify residual impurities in the nanowires. At low temperature, the WZ GaP luminescence shows donor-acceptor pair emission at 2.115 eV and 2.088 eV, and Burstein-Moss band-filling continuum between 2.180 and 2.253 eV, resulting in a direct band gap above 2.170 eV. Sharp exciton α-β-γ lines are observed at 2.140–2.164–2.252 eV, respectively, showing clear differences in lifetime, presence of phonon replicas, and temperature-dependence. The excitonic nature of those peaks is critically discussed, leading to a direct band gap of ∼2.190 eV and to a resonant state associated with the γ-line ∼80 meV above the Γ 8C conduction band edge.

Description: Quite recently, the magnon Hall effect of spin excitations has been observed experimentally on the kagome and pyrochlore lattices. The thermal Hall conductivity κ xy changes sign as a function of magnetic field or temperature on the kagome lattice, and κ xy changes sign upon reversing the sign of the magnetic field on the pyrochlore lattice. Motivated by these recent exciting experimental observations, we theoretically propose a simple realization of the magnon Hall effect in a two-band model on the honeycomb lattice. The magnon Hall effect of spin excitations arises in the usual way via the breaking of inversion symmetry of the lattice, however, by a next-nearest-neighbour Dzyaloshinsky-Moriya interaction. We find that κ xy has a fixed sign for all parameter regimes considered. These results are in contrast to the Lieb, kagome, and pyrochlore lattices. We further show that the low-temperature dependence on the magnon Hall conductivity follows a T 2 law, as opposed to the kagome and pyrochlore lattices. These results suggest an experimental procedure to measure thermal Hall conductivity within a class of 2D honeycomb quantum magnets and ultracold atoms trapped in a honeycomb optical lattice.

Description: The associative and dissociative adsorption of water molecules at low-coverage situations on rutile TiO 2 (110) surface with step defects was investigated by the density functional theory calculations. Structural optimization of the hydroxylated/hydrated configurations at step edges along the 1 1 ̄ 1 crystal directions and the dynamic process of water dissociation were discussed to get a better description of the water/TiO 2 interface. Our results indicate that steps on the TiO 2 (110) surface could be an active site for water dissociation. The results of geometry optimization suggest that the stability of hydroxylated configuration is largely dependent on the locations of the H species and the recombination of water molecules from hydroxyls is observed in the fully hydroxylated condition. However, these hydroxyls can be stabilized by the associatively absorbed water nearby by forming competitive intermolecular hydrogen bonds. The dynamics of water dissociation and hydrogen diffusion were studied by the first principles molecular dynamics simulation and our results suggest that the hydrogen released by water dissociation can be transferred among the adsorbates, such as the unsaturated oxygen atoms–H 2 O–hydroxyl (TiO–H 2 O–OH) complex at step edges, or gradually diffuses to the bulk water system in the form of hydronium (H 3 O + ) at higher water coverage.

Description: A series of CH stretch modes in phenyl radical (C 6 H 5 ) has been investigated via high resolution infrared spectroscopy at sub-Doppler resolution (∼60 MHz) in a supersonic discharge slit jet expansion. Two fundamental vibrations of a 1 symmetry, ν 1 and ν 2 , are observed and rotationally analyzed for the first time, corresponding to in-phase and out-of-phase symmetric CH stretch excitation at the ortho/meta/para and ortho/para C atoms with respect to the radical center. The ν 1 and ν 2 band origins are determined to be 3073.968 50(8) cm −1 and 3062.264 80(7) cm −1 , respectively, which both agree within 5 cm −1 with theoretical anharmonic scaling predictions based on density functional B3LYP/6-311g++(3df,3dp) calculations. Integrated band strengths for each of the CH stretch bands are analyzed, with the relative intensities agreeing remarkably well with theoretical predictions. Frequency comparison with previous low resolution Ar-matrix spectroscopy [A. V. Friderichsen et al. , J. Am. Chem. Soc. 123 , 1977 (2001)] reveals a nearly uniform Δν ≈ + 10-12 cm −1 blue shift between gas phase and Ar matrix values for ν 1 and ν 2 . This differs substantially from the much smaller red shift (Δν ≈ − 1 cm −1 ) reported for the ν 19 mode, and suggests a simple physical model in terms of vibrational mode symmetry and crowding due to the matrix environment. Finally, the infrared phenyl spectra are well described by a simple asymmetric rigid rotor Hamiltonian and show no evidence for spectral congestion due to intramolecular vibrational coupling, which bodes well for high resolution studies of other ring radicals and polycyclic aromatic hydrocarbons. In summary, the combination of slit jet discharge methods with high resolution infrared lasers enables spectroscopic investigation of even highly reactive combustion and interstellar radical intermediates under gas phase, jet-cooled (T rot ≈ 11 K) conditions.

Description: The paper deals with a model-free approach to the analysis of quasielastic neutron scattering intensities from anomalously diffusing quantum particles. All quantities are inferred from the asymptotic form of their time-dependent mean square displacements which grow ∝ t α , with 0 ≤ α 〈 2. Confined diffusion ( α = 0) is here explicitly included. We discuss in particular the intermediate scattering function for long times and the Fourier spectrum of the velocity autocorrelation function for small frequencies. Quantum effects enter in both cases through the general symmetry properties of quantum time correlation functions. It is shown that the fractional diffusion constant can be expressed by a Green-Kubo type relation involving the real part of the velocity autocorrelation function. The theory is exact in the diffusive regime and at moderate momentum transfers.

Description: Adiabatic approximations in time-dependent density functional theory (TDDFT) will in general yield unphysical time-dependent shifts in the resonance positions of a system driven far from its ground-state. This spurious time-dependence is explained in Fuks et al. [Phys. Rev. Lett. 114 , 183002 (2015)] in terms of the violation of an exact condition by the non-equilibrium exchange-correlation kernel of TDDFT. Here we give details on the derivation and discuss reformulations of the exact condition that apply in special cases. In its most general form, the condition states that when a system is left in an arbitrary state, the TDDFT resonance position for a given transition in the absence of time-dependent external fields and ionic motion is independent of the state. Special cases include the invariance of TDDFT resonances computed with respect to any reference interacting stationary state of a fixed potential, and with respect to any choice of appropriate stationary Kohn-Sham reference state. We then present several case studies, including one that utilizes the adiabatically exact approximation, that illustrate the conditions and the impact of their violation on the accuracy of the ensuing dynamics. In particular, charge-transfer across a long-range molecule is hampered, and we show how adjusting the frequency of a driving field to match the time-dependent shift in the charge-transfer resonance frequency results in a larger charge transfer over time.

Description: The Wegner estimate for the Hamiltonian of the Anderson model for the special Gaussian random magnetic field is extended to more general magnetic fields. The Lifshitz tail upper bounds of the integrated density of states as analyzed by Nakamura are reviewed and extended so that Gaussian random magnetic fields can be treated. By these and multiscale analysis, the Anderson localization at low energies is proven.

Description: Simultaneous use of discrete and continuous bases in quantum systems is not possible in the context of Hilbert spaces, but only in the more general structure of rigged Hilbert spaces (RHS). In addition, the relevant operators in RHS (but not in Hilbert space) are a realization of elements of a Lie enveloping algebra and support representations of semigroups. We explicitly construct here basis dependent RHS of the line and half-line and relate them to the universal enveloping algebras of the Weyl-Heisenberg algebra and su (1, 1), respectively. The complete sub-structure of both RHS and of the operators acting on them is obtained from their algebraic structures or from the related fractional Fourier transforms. This allows us to describe both quantum and signal processing states and their dynamics. Two relevant improvements are introduced: (i) new kinds of filters related to restrictions to subspaces and/or the elimination of high frequency fluctuations and (ii) an operatorial structure that, starting from fix objects, describes their time evolution.

Description: Back contact property plays a key role in the charge collection efficiency of c-Si/poly(3,4-ethylthiophene):poly(styrenesulfonate) hybrid solar cells (Si-HSCs), as an alternative for the high-efficiency and low-cost photovoltaic devices. In this letter, we utilize the water soluble poly (ethylene oxide) (PEO) to modify the Al/Si interface to be an Ohmic contact via interface dipole tuning, decreasing the work function of the Al film. This Ohmic contact improves the electron collection efficiency of the rear electrode, increasing the short circuit current density ( J sc ). Furthermore, the interface dipoles make the band bending downward to increase the total barrier height of built-in electric field of the solar cell, enhancing the open circuit voltage ( V oc ). The PEO solar cell exhibits an excellent performance, 12.29% power conversion efficiency, a 25.28% increase from the reference solar cell without a PEO interlayer. The simple and water soluble method as a promising alternative is used to develop the interfacial contact quality of the rear electrode for the high photovoltaic performance of Si-HSCs.

Description: We report the in-plane thermoelectric properties of suspended (Bi 1− x Sb x ) 2 Te 3 nanoplates with x ranging from 0.07 to 0.95 and thicknesses ranging from 9 to 42 nm. The results presented here reveal a trend of increasing p -type behavior with increasing antimony concentration, and a maximum Seebeck coefficient and thermoelectric figure of merit at x ∼ 0.5. We additionally tuned extrinsic doping of the surface using a tetrafluoro-tetracyanoquinodimethane (F 4 -TCNQ) coating. The lattice thermal conductivity is found to be below that for undoped ultrathin Bi 2 Te 3 nanoplates of comparable thickness and in the range of 0.2–0.7 W m −1 K −1 at room temperature.

Description: We demonstrate a high-efficiency tunable acoustic absorber for low frequencies (

Description: Micron-sized metal-coated polymer spheres are frequently used as filler particles in conductive composites for electronic interconnects. However, the intrinsic electrical resistivity of the spherical thin films has not been attainable due to deficiency in methods that eliminate the effect of contact resistance. In this work, a four-point probing method using vacuum compatible piezo-actuated micro robots was developed to directly investigate the electric properties of individual silver-coated spheres under real-time observation in a scanning electron microscope. Poly(methyl methacrylate) spheres with a diameter of 30  μ m and four different film thicknesses (270 nm, 150 nm, 100 nm, and 60 nm) were investigated. By multiplying the experimental results with geometrical correction factors obtained using finite element models, the resistivities of the thin films were estimated for the four thicknesses. These were higher than the resistivity of bulk silver.

Description: The synthesis of a 50 unit cell thick n = 4 Sr n+1 Ti n O 3n+1 (Sr 5 Ti 4 O 13 ) Ruddlesden-Popper (RP) phase film is demonstrated by sequentially depositing SrO and TiO 2 layers in an alternating fashion using hybrid molecular beam epitaxy (MBE), where Ti was supplied using titanium tetraisopropoxide (TTIP). A detailed calibration procedure is outlined for determining the shuttering times to deposit SrO and TiO 2 layers with precise monolayer doses using in-situ reflection high energy electron diffraction (RHEED) as feedback. Using optimized Sr and TTIP shuttering times, a fully automated growth of the n = 4 RP phase was carried out over a period of 〉4.5 h. Very stable RHEED intensity oscillations were observed over the entire growth period. The structural characterization by X-ray diffraction and high resolution transmission electron microscopy revealed that a constant periodicity of four SrTiO 3 perovskite unit cell blocks separating the double SrO rocksalt layer was maintained throughout the entire film thickness with a very little amount of planar faults oriented perpendicular to the growth front direction. These results illustrate that hybrid MBE is capable of layer-by-layer growth with atomic level precision and excellent flux stability.

Description: We implement a quantum random number generator based on a balanced homodyne measurement of vacuum fluctuations of the electromagnetic field. The digitized signal is directly processed with a fast randomness extraction scheme based on a linear feedback shift register. The random bit stream is continuously read in a computer at a rate of about 480 Mbit/s and passes an extended test suite for random numbers.

Description: Numerous loss mechanisms can limit coherence and scalability of planar and 3D-based circuit quantum electrodynamics (cQED) devices, particularly due to their packaging. The low loss and natural isolation of 3D enclosures make them good candidates for coherent scaling. We introduce a coaxial transmission line device architecture with coherence similar to traditional 3D cQED systems. Measurements demonstrate well-controlled external and on-chip couplings, a spectrum absent of cross-talk or spurious modes, and excellent resonator and qubit lifetimes. We integrate a resonator-qubit system in this architecture with a seamless 3D cavity, and separately pattern a qubit, readout resonator, Purcell filter, and high- Q stripline resonator on a single chip. Device coherence and its ease of integration make this a promising tool for complex experiments.

Description: A diagnostic is developed for determining the hotspot mix in inertial confinement fusion experiments. A multi-channel pinhole camera measures Bremsstrahlung emissions from implosion capsules ranging from 6 keV to 30 keV and records an image of the hotspot. Meanwhile, a planar crystal spectrometer measures Ar line emissions used to deduce the electron density of the hotspot. An X-ray streaked camera records the burn duration. With the Bremsstrahlung spectrum, electron density, hotspot volume, and burn duration, the mix quantity is determined by solving a pair of linear equations. This inferred mix amount has an uncertainty due to the uncertainty of the electron density, but with the help of the measured neutron product, the most likely mix quantity value can be determined. This technique is applied to experimental images to infer the quantity of CH ablator mix into the hotspot.

Description: We perform molecular dynamics simulations to investigate the static and dynamic fragmentation of metallic liquid sheets of tin induced by random surface fluctuations. The static regime is analyzed by simulating sheets of different thicknesses, and the dynamic fragmentation is ensured by applying along the longitudinal direction of a sheet an instantaneous expansion velocity per initial unit length (expansion rate) with values ranging from 1 × 10 9 to 3 × 10 10  s −1 . The simulations show that the static/dynamic fragmentation becomes possible when the fluctuations of the upper and lower surfaces of the sheets can either overlap or make the local volume density of the system go down below a critical value. These two mechanisms cause locally in the sheet the random nucleation of pores of void, on a timescale that exponentially increases with the sheet thickness. Afterwards, the pores develop following distinct stages of growth, coalescence, and percolation, and later in time aggregates of liquid metal are formed. The simulations also show that the fragmentation of static sheets is characterized by relatively mono-dispersed surface and volume distributions of the pores and aggregates, respectively, whereas in extreme conditions of dynamic fragmentation (expansion rate typically in the range of 1 × 10 10  s −1 ), the distributions are rather poly-dispersed and obey a power law decay with surface (volume). A model derived from the simulations suggests that both dynamic and static regimes of fragmentation are similar for expansion rates below typically 1 × 10 7  s −1 .

Description: Metallic hierarchical texture was prepared by nickel-cobalt electro-deposition and subsequent replacement reaction to coat silver. Due to energetically favorable hydrocarbon adsorption on the silver film, contact angle of the surface increased gradually over time after exposure to laboratory air. The substrate became superhydrophobic after three days to aqueous droplets with various pH values. It was found that the surface remained stable after exposing to extreme temperatures in the wide range from −196 °C to 200 °C. Importantly, self-healing of superhydrophobicity can be easily accomplished and repeated in an ambient environment while hydrocarbon desorption occurred under high temperature. Furthermore, this approach can be easily applied to other conductive substrates.

Description: We demonstrate that acoustic levitation can levitate spherical objects much larger than the acoustic wavelength in air. The acoustic levitation of an expanded polystyrene sphere of 50 mm in diameter, corresponding to 3.6 times the wavelength, is achieved by using three 25 kHz ultrasonic transducers arranged in a tripod fashion. In this configuration, a standing wave is created between the transducers and the sphere. The axial acoustic radiation force generated by each transducer on the sphere was modeled numerically as a function of the distance between the sphere and the transducer. The theoretical acoustic radiation force was verified experimentally in a setup consisting of an electronic scale and an ultrasonic transducer mounted on a motorized linear stage. The comparison between the numerical and experimental acoustic radiation forces presents a good agreement.

Description: The standard “Kittel Law” for the thickness and shape of ferroelectric, ferroelastic, or ferromagnet domains assumes mechanical equilibrium. The present paper shows that such domains may be highly nonequilibrium, with unusual thicknesses and shapes. In lead germanate and multiferroic lead zirconate titanate iron tantalate domain wall instabilities resemble hydrodynamics (Richtmyer–Meshkov and Helfrich–Hurault, respectively).