ALBERT

Description: With a unique cultural background and fast economic development, China’s adoption of corporate social responsibility (CSR) has become the center of discussion worldwide, and its successful implementation will have great significance for global sustainability. This paper aims to explore how CSR has given way to economic growth in China since the start of economic transition and its cultural, historical and political background, and how this has affected or been affected by the economic performance of firms. Thus, the recent calls for China to adopt CSR in its industries follow a period where the country arguably had one of the strongest implementations of CSR approaches in the world. This transition is considered in the context of a case study of a Chinese state-owned enterprise (SOE) and a group of small private firms in the same industrial sector in Zhengzhou City, Henan Province over a time span of eight years. While the CSR of the SOE has been steadily decreasing along with the change of ownership structure, its economic performance did not improve as expected. On the other hand, with a steady improvement in economic performance, the small private firms are showing a great reluctance to engage in CSR. The results indicate that implementation of CSR in China needs both the manager’s ethical awareness and the change of institutional framework. The results also raise the question as to whether CSR is a universal concept with a desired means of implementation across the developed and developing world.

Description: In this paper, Nd3+–Yb3+–Er3+-doped β-NaYF4 nanocrystals with different Nd3+ concentrations are synthesized, and the luminescence properties of the upconversion nanoparticles (UCNPs) have been studied under 808-nm excitation for sensitive biological applications. The upconversion luminescence spectra of NaYF4 nanoparticles with different dopants under 808-nm excitation proves that the Nd3+ ion can absorb the photons effectively, and the Yb3+ ion can play the role of an energy-transfer bridging ion between the Nd3+ ion and Er3+ ion. To investigate the effect of the Nd3+ ion, the decay curves of the 4S3/2 → 4I15/2 transition at 540 nm are measured and analyzed. The NaYF4: 20% Yb3+, 2% Er3+, 0.5% Nd3+ nanocrystals have the highest emission intensity among all samples under 808-nm excitation. The UC (upconversion) mechanism under 808-nm excitation is discussed in terms of the experimental results.

Description: In this paper we explore the performances and the opportunities provided by the European satellite Sentinel-1 for water resource management applications in low-income countries. The analysis is supported by a synthetic aperture radar (SAR) simulator, which allowed the quantification of the expected characteristics of Sentinel-1 products in three applications: interferometric digital elevation models (DEMs) generation, land cover mapping and estimation of water volumes retained by small reservoirs. The obtained results quantitatively show that Sentinel-1 data characteristics are fully suitable for most of the application already explored in the recent SAR literature.

Description: A simple and inexpensive method based on solvent extraction followed by low temperature clean-up was applied for determination of seven pyrethroids residues in bovine raw milk using gas chromatography coupled to tandem mass spectrometry (GC-MS/MS) and gas chromatography with electron-capture detector (GC-ECD). Sample extraction procedure was established through the evaluation of seven different extraction protocols, evaluated in terms of analyte recovery and cleanup efficiency. Sample preparation optimization was based on Doehlert design using fifteen runs with three different variables. Response surface methodologies and polynomial analysis were used to define the best extraction conditions. Method validation was carried out based on SANCO guide parameters and assessed by multivariate analysis. Method performance was considered satisfactory since mean recoveries were between 87% and 101% for three distinct concentrations. Accuracy and precision were lower than ±20%, and led to no significant differences (p 〈 0.05) between results obtained by GC-ECD and GC-MS/MS techniques. The method has been applied to routine analysis for determination of pyrethroid residues in bovine raw milk in the Brazilian National Residue Control Plan since 2013, in which a total of 50 samples were analyzed.

Description: In this paper, we study mobile element (ME)-based data-gathering schemes in wireless sensor networks. Due to the physical speed limits of mobile elements, the existing data-gathering schemes that usemobile elements can suffer from high data-gathering latency. In order to address this problem, this paper proposes a new hierarchical and cooperative data-gathering (HiCoDG) scheme that enables multiple mobile elements to cooperate with each other to collect and relay data. In HiCoDG, two types of mobile elements are used: the mobile collector (MC) and the mobile relay (MR). MCs collect data from sensors and forward them to the MR, which will deliver them to the sink. In this work, we also formulated an integer linear programming (ILP) optimization problem to find the optimal trajectories for MCs and the MR, such that the traveling distance of MEs is minimized. Two variants of HiCoDG, intermediate station (IS)-based and cooperative movement scheduling (CMS)-based, are proposed to facilitate cooperative data forwarding from MCs to theMR. An analytical model for estimating the average data-gathering latency in HiCoDG was also designed. Simulations were performed to compare the performance of the IS and CMS variants, as well as a multiple traveling salesman problem (mTSP)-based approach. The simulation results show that HiCoDG outperformsmTSP in terms of latency. The results also show that CMS can achieve the lowest latency with low energy consumption.

Description: Interdisciplinary sustainability science teamwork skills are essential for addressing the world’s most pressing and complex sustainability problems, which inherently have social, natural, and engineering science dimensions. Further, because sustainability science problems exist at global scales, interdisciplinary science teams will need to consist of international members who communicate and work together effectively. Students trained in international interdisciplinary science skills will be able to hit the ground running when they obtain jobs requiring them to tackle sustainability problems. While many universities now have sustainability science programs, few offer courses that are interdisciplinary and international in scope. In the fall semester of 2013, we piloted a course for graduate students entitled “Principles of Interdisciplinary Sustainability Research” at Michigan Technological University. This course was part of our United States National Science Foundation Partnerships in International Research and Education project on bioenergy development impacts across the Americas. In this case study, we describe the course development and implementation, share critical insights from our experience teaching the course and student learning outcomes, and give recommendations for future similar courses.

Description: There have been few assessments of the performance of alternative resistance surfaces, and little is known about how connectivity modeling approaches differ in their ability to predict organism movements. In this paper, we evaluate the performance of four connectivity modeling approaches applied to two resistance surfaces in predicting the locations of highway crossings by American black bears in the northern Rocky Mountains, USA. We found that a resistance surface derived directly from movement data greatly outperformed a resistance surface produced from analysis of genetic differentiation, despite their heuristic similarities. Our analysis also suggested differences in the performance of different connectivity modeling approaches. Factorial least cost paths appeared to slightly outperform other methods on the movement-derived resistance surface, but had very poor performance on the resistance surface obtained from multi-model landscape genetic analysis. Cumulative resistant kernels appeared to offer the best combination of high predictive performance and sensitivity to differences in resistance surface parameterization. Our analysis highlights that even when two resistance surfaces include the same variables and have a high spatial correlation of resistance values, they may perform very differently in predicting animal movement and population connectivity.

Description: Patients with limited English proficiency have known limitations accessing health care, but differences in hospital outcomes once access is obtained are unknown. We investigate inpatient mortality rates and obstetric trauma for self-reported speakers of English, Spanish, and languages of Asia and the Pacific Islands (API) and compare quality of care by language with patterns by race/ethnicity. Data were from the United States Agency for Healthcare Research and Quality, Healthcare Cost and Utilization Project, 2009 State Inpatient Databases for California. There were 3,757,218 records. Speaking a non-English principal language and having a non-White race/ethnicity did not place patients at higher risk for inpatient mortality; the exception was significantly higher stroke mortality for Japanese-speaking patients. Patients who spoke API languages or had API race/ethnicity had higher risk for obstetric trauma than English-speaking White patients. Spanish-speaking Hispanic patients had more obstetric trauma than English-speaking Hispanic patients. The influence of language on obstetric trauma and the potential effects of interpretation services on inpatient care are discussed. The broader context of policy implications for collection and reporting of language data is also presented. Results from other countries with and without English as a primary language are needed for the broadest interpretation and generalization of outcomes.

Description: Large private sector investments in low- and middle-income countries are often critically evaluated with regards to their environmental, social, human rights, and health impacts. A health impact assessment, including a baseline health survey, was commissioned by the Addax Bioenergy Sierra Leone project in 2010. As part of the monitoring, a follow-up survey was conducted three years later. A set of health indicators was assessed at six impacted and two control sites. Most of these indices improved, particularly at the impacted sites. The prevalences of stunting, wasting, and Plasmodium falciparum in children under five years of age decreased significantly at impacted sites (all p 〈 0.05) and non-significantly at control sites. Anemia in children and in women of reproductive age (15–49 years) decreased significantly at impacted and control sites (p 〈 0.05 and p 〈 0.001, respectively). Health facility-based deliveries increased significantly at the impacted sites (p 〈 0.05). The prevalences of helminth infections in children aged 10–15 years remained approximately at the same levels, although focal increases at the impacted sites were noted. Access to improved sanitation decreased significantly (p 〈 0.05) at control and non-significantly at impacted sites. Water quality remained poor without significant changes. The epidemiologic monitoring of a bioenergy project provides a useful contribution for evidence-based decision-making.

Description: Elderly persons’ perceived accessibility to railway traveling depends on their functional limitations/diseases, their functional abilities and their travel behaviors in interaction with the barriers encountered during whole trips. A survey was conducted on a random sample of 1000 city residents (65–85 years old; 57% response rate). The travels were perceived least accessible by respondents with severely reduced functional ability and by those with more than one functional limitation/disease (e.g., restricted mobility and chronic pain). Those who traveled “often”, perceived the accessibility to be better than those who traveled less frequently. For travelers with high functional ability, the main barriers to more frequent traveling were travel costs and low punctuality. For those with low functional ability, one’s own health was reported to be the main barrier. Our results clarify the links among existing functional limitations/functional abilities, the barriers encountered, the travel behavior, and the overall accessibility to traveling. By operationalizing the whole-trip concept as a chain of events, we deliver practical knowledge on vulnerable groups for decision-making to improve the transport environment for all.

Description: Sustainable water management (SWM) requires allocating between competing water sector demands, and balancing the financial and social resources required to support necessary water systems. The objective of this review is to assess SWM in three sectors: urban, agricultural, and natural systems. This review explores the following questions: (1) How is SWM defined and evaluated? (2) What are the challenges associated with sustainable development in each sector? (3) What are the areas of greatest potential improvement in urban and agricultural water management systems? And (4) What role does country development status have in SWM practices? The methods for evaluating water management practices range from relatively simple indicator methods to integration of multiple models, depending on the complexity of the problem and resources of the investigators. The two key findings and recommendations for meeting SWM objectives are: (1) all forms of water must be considered usable, and reusable, water resources; and (2) increasing agricultural crop water production represents the largest opportunity for reducing total water consumption, and will be required to meet global food security needs. The level of regional development should not dictate sustainability objectives, however local infrastructure conditions and financial capabilities should inform the details of water system design and evaluation.

Description: Wireless Sensor Network (WSN) is leading to a new paradigm of Internet of Everything (IoE). WSNs have a wide range of applications but are usually deployed in a particular application. However, the future of WSNs lies in the aggregation and allocation of resources, serving diverse applications. WSN virtualization by the middleware is an emerging concept that enables aggregation of multiple independent heterogeneous devices, networks, radios and software platforms; and enhancing application development. WSN virtualization, middleware can further be categorized into sensor virtualization and network virtualization. Middleware for WSN virtualization poses several challenges like efficient decoupling of networks, devices and software. In this paper efforts have been put forward to bring an overview of the previous and current middleware designs for WSN virtualization, the design goals, software architectures, abstracted services, testbeds and programming techniques. Furthermore, the paper also presents the proposed model, challenges and future opportunities for further research in the middleware designs for WSN virtualization.

Description: In most emerging economies, there has been many incentives and high availability of funding for low-cost housing projects. This has encouraged product standardization and the application of mass production ideas, based on the assumption that this is the most effective strategy for reducing costs. However, the delivery of highly standardized housing units to customers with different needs, without considering their lifestyle and perception of value, often results in inadequate products. Mass customization has been pointed out as an effective strategy to improve value generation in low-cost housing projects, and to avoid waste caused by renovations done in dwellings soon after occupancy. However, one of the main challenges for the implementation of mass customization is the definition of a set of relevant options based on users’ perceived value. The aim of this paper is to propose a method for defining value adding attributes in customized housing projects, which can support decision-making in product development. The means-end chain theory was used as theoretical framework to connect product attributes and costumers’ values, through the application of the laddering technique. The method was tested in two house-building projects delivered by a company from Brazil. The main contribution of this method is to indicate the customization units that are most important for users along with the explanation of why those units are the most relevant ones.

Description: A fiber optic daylighting system is an evolving technology for transporting illumination from sunlight into building interiors. This system is a solution developed by daylighting designers to reduce operational costs and enhance comfort. As an innovative technology, fiber optic daylighting systems can illuminate building interiors efficiently compared with other daylighting strategies. However, as a transmission medium in daylighting systems, optical fibers require uniform light distribution in sunlight concentration, which could generate heat. Therefore, this study aims to investigate the effect of heat buildup produced by end-emitting fiber optic daylighting systems in tropical buildings. The applied method adopts a new fiber optic daylighting system technology from Sweden called Parans SP3, with a 10 m cable to be tested in an actual room size under the Malaysian climatic environment, particularly within the vicinity of the main campus of the Universiti Sains Malaysia. Results show that the system generated a temperature of 1.3 °C under average conditions through fiber optic diffusers and increases indoor temperature by 0.8 °C in a 60 m3 room. According to the results, applying fiber optic daylighting systems, as renewable energy sources, generates extra heat gain in building interiors in the tropics.

Description: Coastal fisheries contribute to global food security, since fish are an important source of protein for many coastal communities in the world. However, they are constrained by problems, such as weak management of fisheries and overfishing. Local communities perceive that they are fishing less, as in other fisheries in the world. The aim of this study was to evaluate the fisheries sustainability in the Jalisco coast through the fishing footprint, or fishprint (FP), based on the primary productivity required (PPR) and the appropriated surface by the activity (biocapacity). The total catch was 20,448.2 metric tons from 2002–2012, and the average footprint was calculated to be 65,458 gha/year, a figure that quadrupled in a period of 10 years; the biocapacity decreased, and the average trophic level of catches was 3.1, which implies that it has remained at average levels, resulting in a positive balance between biocapacity and ecological footprint. Therefore, under this approach, the fishing activity is sustainable along the coast of Jalisco.

Description: Long-Term Evolution (LTE) is a fourth-generation mobile communication technology implemented throughout the world. It is the communication means of smartphones that send and receive all of the private date of individuals. M2M, IOT, etc., are the base technologies of mobile communication that will be used in the future cyber world. However, identification parameters, such as International Mobile Subscriber Identity (IMSI), Radio Network Temporary Identities (RNTI), etc., in the initial attach section for accessing the LTE network are presented with the vulnerability of being exposed as clear text. Such vulnerability does not end in a mere identification parameter, but can lead to a secondary attack using the identification parameter, such as replication of the smartphone, illegal use of the mobile communication network, etc. This paper proposes a security protocol to safely transmit identification parameters in different cases of the initial attach. The proposed security protocol solves the exposed vulnerability by encrypting the parameters in transmission. Using an OPNET simulator, it is shown that the average rate of delay and processing ratio are efficient in comparison to the existing process.

Description: The impact of adverse weather conditions (AWCs) on crop production is random in both time and space and depends on factors such as severity, previous agrometeorological conditions, and plant vulnerability at a specific crop development stage. Any exclusion or improper treatment of any of these factors can cause crop models to produce significant under- or overestimates of yield. The analysis presented in this paper focuses on a range of agrometeorological indices (AMI) related to AWCs that might affect real yield as well as simulated yield. For this purpose, the analysis addressed four indicators of extreme temperatures and three indicators of dry conditions during the growth period of maize and winter wheat in Austria, Croatia, Serbia, Slovakia, and Sweden. It is shown that increases in the number and intensity of AWCs cannot be unambiguously associated with increased deviations in simulated yields. The identified correlations indicate an increase in modeling uncertainty. This finding represents important information for the crop modeling community. Additionally, it opens a window of opportunity for a statistical (“event scenario”) approach based on correlations between agrometeorological indices of AWCs and crop yield data series. This approach can provide scenarios for certain locations, crop types, and AWC patterns and, therefore, improve yield forecasting in the presence of AWCs.

Description: Ultrafine grained sheets were prepared from a twin-roll cast AA8006 aluminium alloy using accumulative roll-bonding process at room temperature. The evolution of microstructure of sheets after three accumulative roll-bonding passes during isochronal annealing with a constant step of 20 °C/20 min was studied by light and electron microscopy. The influence of the resulting microstructure on mechanical properties was monitored by microhardness measurements. The microhardness increases when the material is annealed up to 160 °C. Above this temperature a fast drop of microhardness occurs followed by a negligible variation at annealing temperatures exceeding 300 °C. In order to map continuously the microstructure changes during annealing, the in situ TEM experiments in the heating stage were performed as a supplement to post-mortem TEM observations.

Description: We processed X-band COSMO-SkyMed 3-m resolution StripMap HIMAGE time series (March 2011–June 2013) with the Stanford Method for Persistent Scatterers (StaMPS), to retrieve an updated picture of the condition and structural health of the historic centre of Rome, Italy, and neighbouring quarters. Taking advantage of an average target density of over 2800 PS/km2, we analysed the spatial distribution of more than 310,000 radar targets against: (1) land cover; (2) the location of archaeological ruins and restoration activities; and (3) the size, orientation and morphology of historical buildings. Radar interpretation was addressed from the perspective of conservators, and the deformation estimates were correlated to local geohazards and triggering factors of structural collapse. In the context of overall stability, deformation was identified at the single-monument scale, e.g., for the Roman cistern and exedra in the Oppian Hill. Comparative assessment against InSAR processing of C-band imagery (1992–2010) published in the literature confirms the persistence of ground motions affecting monuments and subsidence in southern residential quarters adjacent to the Tiber River, due to the consolidation of compressible deposits. Vertical velocity estimated from COSMO-SkyMed PS exceeds −7.0 mm/y in areas of recent urbanization.

Description: The purpose of this study was to examine how different polarimetric parameters and an object-based approach influence the classification results of various land use/land cover types using fully polarimetric ALOS PALSAR data over coastal wetlands in Yancheng, China. To verify the efficiency of the proposed method, five other classifications (the Wishart supervised classification, the proposed method without polarimetric parameters, the proposed method without an object-based analysis, the proposed method without textural and geometric information and the proposed method using the nearest-neighbor classifier) were applied for comparison. The results indicated that some polarimetric parameters, such as Shannon entropy, Krogager_Kd, Alpha, HAAlpha_T11, VanZyl3_Vol, Derd, Barnes2_T33, polarization fraction, Barnes1_T33, Neuman_delta_mod and entropy, greatly improved the classification results. The shape index was a useful feature in distinguishing fish ponds and rivers. The distance to the sea can be regarded as an important factor in reducing the confusion between herbaceous wetland vegetation and grasslands. Furthermore, the decision tree algorithm increased the overall accuracy by 6.8% compared with the nearest neighbor classifier. This research demonstrated that different polarimetric parameters and the object-based approach significantly improved the performance of land cover classification in coastal wetlands using ALOS PALSAR data.

Description: A new fluorescent probe P derived from naphthalimide bearing a pyridine group has been synthesized and characterized. The proposed probe P shows high selectivity and sensitivity to Cu2+ in aqueous media. Under optimized conditions, the linear response of P (2 μM) toward Cu2+ was 0.05–0.9 μM in ethanol-water solution (3:2, v:v, 50 mM HEPES, pH 7.4), and the detection limit was 0.03 μM.

Description: Chlorpyrifos (CPF) is a commonly used organophosphate insecticide (OP). In adults, exposure to OPs has been inconsistently associated with reduced lung function. OP exposure and lung function has not been assessed in adolescents. The objective of this study was to assess CPF exposure and lung function among Egyptian adolescents. We conducted a 10-month study of male adolescent pesticide applicators (n = 38) and non-applicators of similar age (n = 24). Urinary 3,5,6-trichloro-2-pyridinol (TPCy), a CPF-specific metabolite, was analyzed in specimens collected throughout the study. Spirometry was performed twice after pesticide application: day 146, when TCPy levels were elevated and day 269, when TCPy levels were near baseline. Applicators had higher levels of TCPy (mean cumulative TCPy day 146 = 33,217.6; standard deviation (SD) = 49,179.3) than non-applicators (mean cumulative TCPy day 146 = 3290.8; SD = 3994.9). Compared with non-applicators, applicators had higher odds of reporting wheeze, odds ratio = 3.41 (95% CI: 0.70; 17.41). Cumulative urinary TCPy was inversely associated with spirometric measurements at day 146, but not at day 269. Although generally non-significant, results were consistent with an inverse association between exposure to CPF and lung function.

Description: Diatoms are a highly diversified group of algae that are widely distributed in aquatic ecosystems, and various species have different nutrient and temperature requirements for optimal growth. Here, we describe unusual psychrophilic diatoms of Cymbella in a travertine deposition environment in southwestern China in winter season. Travertine surfaces are colonized by these psychrophilic diatoms, which form biofilms of extracellular polysaccharide substances (EPS) with active metabolic activities in extremely cold conditions. The travertine in Huanglong, is a typical single crystalline calcite with anisotropic lattice distortions of unit cell parameters along axes of a and c, and this structure is suggestive of some level of metabolic mediation on mineralization. Near-edge X-ray absorption fine structure spectroscopy (NEXAFS) results further confirmed the occurrence of biogenic distortion of the crystal lattice of travertine calcite. Overall, our results imply that the metabolic influence of psychrophilic diatoms may be particularly important for promoting formation and dissolution of travertine in extremely cold environments of Huanglong. The EPS of psychrophilic diatoms will protect travertine from HCO3− etching and provide template for forming travertine when water re-flowing, in warm season.

Description: Due to an error on our part, the pagination and the doi number of this manuscript [1] were missing during updating. The correct pagination is 9600–9652, and the doi number is 10.3390/rs6109600. Here is the correct version:[...]

Description: The aim of this study is to investigate the relationships between road traffic noise exposure, annoyance caused by different noise sources and validated health indicators in a cohort of 1375 adults from the region of Basel, Switzerland. Road traffic noise exposure for each study participant was determined using modelling, and annoyance from various noise sources was inquired by means of a four-point Likert scale. Regression parameters from multivariable regression models for the von Zerssen score of somatic symptoms (point symptom score increase per annoyance category) showed strongest associations with annoyance from industry noise (2.36, 95% CI: 1.54, 3.17), neighbour noise (1.62, 95% CI: 1.17, 2.06) and road traffic noise (1.53, 95% CI: 1.09, 1.96). Increase in modelled noise exposure by 10 dB(A) resulted in a von Zerssen symptom score increase of 0.47 (95% CI: −0.01, 0.95) units. Subsequent structural equation modelling revealed that the association between physical noise exposure and health-related quality of life (HRQOL) is strongly mediated by annoyance and sleep disturbance. This study elucidates the complex interplay of different factors for the association between physical noise exposure and HRQOL.

Description: Recently, as a supplement of cement, the utilization of pozzolanic materials in cement and concrete manufacturing has increased significantly. This study investigates the scope to use pozzolanic wastes (slag, palm oil fuel ash and rice husk ash) as an alkali activated binder (AAB) that can be used as an alternative to cement. To activate these materials, sodium hydroxide solution was used at 1.0, 2.5 and 5.0 molar concentration added into the mortar, separately. The required solution was used to maintain the flow of mortar at 110% ± 5%. The consistency and setting time of the AAB-paste were determined. Mortar was tested for its flow, compressive strength, porosity, water absorption and thermal resistance (heating at 700 °C) and investigated by scanning electron microscopy. The experimental results reveal that AAB-mortar exhibits less flow than that of ordinary Portland cement (OPC). Surprisingly, AAB-mortars (with 2.5 molar solution) achieved a compressive strength of 34.3 MPa at 28 days, while OPC shows that of 43.9 MPa under the same conditions. Although water absorption and porosity of the AAB-mortar are slightly high, it shows excellent thermal resistance compared to OPC. Therefore, based on the test results, it can be concluded that in the presence of a chemical activator, the aforementioned pozzolans can be used as an alternative material for cement.

Description: Background: Lead is a pervasive pollutant, associated at low levels to many adverse health effects. Objective: To investigate lead levels, exposure pathways and intervention possibilities in school children from Alpuyeca, in Morelos, Mexico. Methods: Blood lead concentrations (BPb) were measured in 226 children in 2011. Exposure pathways were assessed through a questionnaire, lead measurements in different environmental matrices and spatial aggregation analysis of lead concentrations. Results: BPb ranged from 1.5 to 36.5 µg/dL, with a mean (SD) of 7.23 (4.9) µg/dL. Sixty-four and 18% of the children had BPb > 5 µg/dL and > 10 µg/dL, respectively. The use of lead glazed ceramics was reported in almost half of the households; it was the main BPb determinant and it was associated with an increased risk of having BPb > 5 g/dL by 2.7 times (p = 0.001). Environmental samples were within US EPA’s lead recommended limits, and blood lead levels were randomly distributed in the community. Conclusions: Lead remains a public health problem in Alpuyeca, Mexico. Unlike other local pollutants, lead exposure prevention can be achieved inexpensively and in a short term. Interventions should make mothers aware of lead’s health effects and empower them to safeguard their children’s health by avoiding the culturally ingrained use of lead glazed pottery.Background: Lead is a pervasive pollutant, associated at low levels to many adverse health effects. Objective: To investigate lead levels, exposure pathways and intervention possibilities in school children from Alpuyeca, in Morelos, Mexico. Methods: Blood lead concentrations (BPb) were measured in 226 children in 2011. Exposure pathways were assessed through a questionnaire, lead measurements in different environmental matrices and spatial aggregation analysis of lead concentrations. Results: BPb ranged from 1.5 to 36.5 µg/dL, with a mean (SD) of 7.23 (4.9) µg/dL. Sixty-four and 18% of the children had BPb > 5 µg/dL and > 10 µg/dL, respectively. The use of lead glazed ceramics was reported in almost half of the households; it was the main BPb determinant and it was associated with an increased risk of having BPb > 5 g/dL by 2.7 times (p = 0.001). Environmental samples were within US EPA’s lead recommended limits, and blood lead levels were randomly distributed in the community. Conclusions: Lead remains a public health problem in Alpuyeca, Mexico. Unlike other local pollutants, lead exposure prevention can be achieved inexpensively and in a short term. Interventions should make mothers aware of lead’s health effects and empower them to safeguard their children’s health by avoiding the culturally ingrained use of lead glazed pottery.

Description: This paper presents a performance analysis of two open-source, laser scanner-based Simultaneous Localization and Mapping (SLAM) techniques (i.e., Gmapping and Hector SLAM) using a Microsoft Kinect to replace the laser sensor. Furthermore, the paper proposes a new system integration approach whereby a Linux virtual machine is used to run the open source SLAM algorithms. The experiments were conducted in two different environments; a small room with no features and a typical office corridor with desks and chairs. Using the data logged from real-time experiments, each SLAM technique was simulated and tested with different parameter settings. The results show that the system is able to achieve real time SLAM operation. The system implementation offers a simple and reliable way to compare the performance of Windows-based SLAM algorithm with the algorithms typically implemented in a Robot Operating System (ROS). The results also indicate that certain modifications to the default laser scanner-based parameters are able to improve the map accuracy. However, the limited field of view and range of Kinect’s depth sensor often causes the map to be inaccurate, especially in featureless areas, therefore the Kinect sensor is not a direct replacement for a laser scanner, but rather offers a feasible alternative for 2D SLAM tasks.

Description: Winemaking is a dynamic process, where microbiological and chemical effects may strongly differentiate products from the same vineyard and even between wine vats. This high variability means an increase in work in terms of control and process management. The winemaking process therefore requires a site-specific approach in order to optimize cellar practices and quality management, suggesting a new concept of winemaking, identified as Precision Enology. The Institute of Biometeorology of the Italian National Research Council has developed a wireless monitoring system, consisting of a series of nodes integrated in barrel bungs with sensors for the measurement of wine physical and chemical parameters in the barrel. This paper describes an open-source evolution of the preliminary prototype, using Arduino-based technology. Results have shown good performance in terms of data transmission and accuracy, minimal size and power consumption. The system has been designed to create a low-cost product, which allows a remote and real-time control of wine evolution in each barrel, minimizing costs and time for sampling and laboratory analysis. The possibility of integrating any kind of sensors makes the system a flexible tool that can satisfy various monitoring needs.

Description: Crotamine is one of the main constituents of the venom of the South American rattlesnake Crotalus durissus terrificus. Here we sought to investigate the inflammatory and toxicological effects induced by the intrahippocampal administration of crotamine isolated from Crotalus whole venom. Adult rats received an intrahippocampal infusion of crotamine or vehicle and were euthanized 24 h or 21 days after infusion. Plasma and brain tissue were collected for biochemical analysis. Complete blood count, creatinine, urea, glutamic oxaloacetic transaminase (GOT), glutamic pyruvic transaminase (GPT), creatine-kinase (CK), creatine kinase-muscle B (CK-MB) and oxidative parameters (assessed by DNA damage and micronucleus frequency in leukocytes, lipid peroxidation and protein carbonyls in plasma and brain) were quantified. Unpaired and paired t-tests were used for comparisons between saline and crotamine groups, and within groups (24 h vs. 21 days), respectively. After 24 h crotamine infusion promoted an increase of urea, GOT, GPT, CK, and platelets values (p ≤ 0.01), while red blood cells, hematocrit and leukocytes values decreased (p ≤ 0.01). Additionally, 21 days after infusion crotamine group showed increased creatinine, leukocytes, TBARS (plasma and brain), carbonyl (plasma and brain) and micronucleus compared to the saline-group (p ≤ 0.01). Our findings show that crotamine infusion alter hematological parameters and cardiac markers, as well as oxidative parameters, not only in the brain, but also in the blood, indicating a systemic pro-inflammatory and toxicological activity. A further scientific attempt in terms of preserving the beneficial activity over toxicity is required.

Description: The objective of this work was to evaluate the effect of heat treatment and compression on the swelling and surface roughness of Southern red oak (Quercus falcate Michx.) and Southern pine (Pinus taeda L.). Specimens were exposed to temperature levels of 110 °C or 200 °C for 8 h before they were compressed using 2.5 MPa pressure for 5 min. Swelling values of the control and heat-treated samples in three grain orientations were evaluated by soaking them in water for 48 h. A stylus method was employed to determine the surface characteristics of the samples. Three main roughness parameters, namely mean arithmetic deviation of profile (Ra), mean peak-to-valley height (Rz), and maximum roughness (Rmax) were used to evaluate the effect of heat treatment on surface characteristics of the samples. Oak and pine specimens had 39.8% and 28.7% lower tangential swelling values, respectively, than those of control samples as a result of exposure to a temperature of 200 °C. Heat treatment did not make any significant difference on surface quality. Micrographs taken from cross sections of the specimens revealed that there was some cell distortion and modification due to heat treatment as well as compression. Combination of heat treatment and compression can be considered an alternative method to improve certain physical properties of these two species.

Description: We have recently been made aware by Prof. Sharon Megdal (The University of Arizona) and Dr. Peter Dillon (CSIRO) of some errors and omissions in our recent paper [1]. The authors wish to make the following corrections to this paper:[...]

Description: Due to instability and poor identification ability of single pyroelectric infrared (PIR) detector for human target identification, this paper proposes a new approach to fuse the information collected from multiple PIR sensors for human identification. Firstly, Fast Fourier Transform (FFT), Short Time Fourier Transform (STFT), Wavelet Transform (WT) and Wavelet Packet Transform (WPT) are adopted to extract features of the human body, which can be achieved by single PIR sensor. Then, we apply Principal Component Analysis (PCA) and Support Vector Machine (SVM) to reduce the characteristic dimensions and to classify the human targets, respectively. Finally, Fuzzy Comprehensive Evaluation (FCE) is utilized to fuse recognition results from multiple PIR sensors to finalize human identification. The pyroelectric characteristics under scenarios with different people and/or different paths are analyzed by various experiments, and the recognition results with/without fusion procedure are also shown and compared. The experimental results demonstrate our scheme has improved efficiency for human identification.

Description: Global climate change is affecting health and mortality, particularly in vulnerable populations. High ambient temperatures decrease blood pressure (BP) in young and middle aged adults and may lead to orthostatic hypotension, increasing the risk of falls in older adults. The aim of this study was to evaluate the feasibility of a test protocol to investigate BP response and aerobic capacity of older adults in a hot indoor environment. BP response and aerobic capacity were assessed in 26 community-dwelling older women (median age 75.5 years) at a room temperature of either 20 °C or 30 °C. The protocol was well tolerated by all participants. In the 30 °C condition systolic and diastolic BP (median difference 10 and 8 mmHg, respectively) and distance walked in 6 min (median difference 29.3 m) were lower than in the 20 °C condition (all p 〈 0.01). Systolic BP decreased after standing up from a lying position in the 30 °C (17.4 mmHg) and 20 °C (14.2 mmHg) condition (both p 〈 0.001). In conclusion, the protocol is feasible in this cohort and should be repeated in older adults with poor physical performance and impaired cardio-vascular response mechanisms. Furthermore, aerobic capacity was reduced after exposure to hot environmental temperatures, which should be considered when recommending exercise to older people during the summer months.

Description: A novel memristor circuit is presented, which is generated from the canonical Chua’s circuit by replacing the Chua’s diode with a first order memristive diode bridge. The circuit dynamical characteristics with the variations of circuit parameters are investigated both theoretically and numerically. It can be found that the circuit has three determined equilibrium points, including a zero saddle point and two nonzero saddle-foci with index 2. Specially, the circuit is non-dissipative in the neighborhood of the zero saddle point, and there exists complex nonlinear phenomena of coexisting bifurcation modes and coexisting chaotic attractors. Experimental observations are performed to verify the numerical simulation results.

Description: A combustion synthesis method has been developed for synthesis of Eu2+ doped CaAlSiN3 phosphor and its photoluminescence properties were investigated. Ca, Al, Si, and Eu2O3 powders were used as the Ca, Al, Si and Eu sources. The addition of NaN3, NH4Cl and Si3N4 powders was found to increase significantly the product yield. These powders were mixed and pressed into a compact, which was then wrapped up with an igniting agent (i.e., Mg+Fe3O4). The compact was ignited by electrical heating under a N2 pressure of ≤1.0 MPa. Effects of these experimental parameters on the product yield were investigated and a reaction mechanism was proposed. The synthesized CaAlSiN3:Eu2+ phosphor absorbs light in the region of 200–600 nm and shows a broad band emission in the region of 500–800 nm due to the 4f65d1 → 4f7 transition of Eu2+. The sample doped with Eu2+ at the optimized molar ratio of 0.04 is efficiently excited by the blue light (460 nm) and generates emission peaking at ~650 nm with peak emission intensity ~106% of a commercially available phosphor, YAG:Ce3+(P46-Y3).The internal quantum efficiency of the synthesized phosphor was measured to be 71%, compared to 69% of the YAG:Ce3+ (P46-Y3).

Description: Avoiding or minimizing potential environmental impact is the driving idea behind protecting a population’s health via Environmental Impact Assessments (EIAs) and Strategic Environmental Assessments (SEAs). However, both are often carried out without any systematic approach. This paper describes the findings of a review of HIA, EIA and SEA experiences carried out by the authors, who act as institutional competent subjects at the national and regional levels in Italy. The analysis of how health is tackled in EIA and SEA procedures could support the definition of a protocol for the integration of HIA with EIA and SEA. Although EIA and SEA approaches include the aim of protecting health, significant technical and methodological gaps are present when assessing health systematically, and their basic principles regarding assessment are unsatisfactory for promoting and addressing healthcare concepts stated by the WHO. HIA is still poorly integrated into the decision-making process, screening and monitoring phases are only occasionally implemented, and operational details are not well-defined. The collaborative approach of institutions involved in environment and health is a core element in a systematic advancement toward supporting effective decisions and effective protection of the environment and health. At the Italian national level, the definition of guidelines and tools for HIA, also in relation with EIA and SEA, is of great interest.

Description: There is expedient evidence showing that differences in adolescent alcohol consumption and other risk-behaviour depend on both family structure and family member drunkenness exposure. Data were obtained among adolescents (N = 12,115, mean age 14.9 ± 0.89) in Austria, Estonia, France, Germany, Hungary, Ireland, Israel, Italy, Romania, Slovenia and Spain within the European Union’s 7th Framework Programme funded project, ‘Saving and Empowering Young Lives in Europe (SEYLE)’. The current study reveals how adolescents’ alcohol consumption patterns are related to their family structure and having seen their family member drunk. The results revealed statistically significant differences in adolescent alcohol consumption depending on whether the adolescent lives in a family with both birth parents, in a single-parent family or in a family with one birth parent and one step-parent. The study also revealed that the abstaining from alcohol percentage among adolescents was greater in families with both birth parents compared to other family types. The study also showed that the more often adolescents see their family member drunk the more they drink themselves. There is no difference in adolescent drinking patterns whether they see their family member drunk once a month or once a week. This study gives an insight on which subgroups of adolescents are at heightened risk of alcohol abuse and that decrease of family member drunkenness may have positive effects on the drinking habits of their children.

Description: In volcanic areas, where it can be difficult to perform direct surveys, digital photogrammetry techniques are rarely adopted for routine volcano monitoring. Nevertheless, they have remarkable potentialities for observing active volcanic features (e.g., fissures, lava flows) and the connected deformation processes. The ability to obtain accurate quantitative data of definite accuracy in short time spans makes digital photogrammetry a suitable method for controlling the evolution of rapidly changing large-area volcanic phenomena. The systematic acquisition of airborne photogrammetric datasets can be adopted for implementing a more effective procedure aimed at long-term volcano monitoring and hazard assessment. In addition, during the volcanic crisis, the frequent acquisition of oblique digital images from helicopter allows for quasi-real-time monitoring to support mitigation actions by civil protection. These images are commonly used to update existing maps through a photo-interpretation approach that provide data of unknown accuracy. This work presents a scientific tool (Orthoview) that implements a straightforward photogrammetric approach to generate digital orthophotos from single-view oblique images provided that at least four Ground Control Points (GCP) and current Digital Elevation Models (DEM) are available. The influence of the view geometry, of sparse and not-signalized GCP and DEM inaccuracies is analyzed for evaluating the performance of the developed tool in comparison with other remote sensing techniques. Results obtained with datasets from Etna and Stromboli volcanoes demonstrate that 2D features measured on the produced orthophotos can reach sub-meter-level accuracy.

Description: When object-based analysis is applied to very high-resolution imagery, pixels within the segments reveal large spectral inhomogeneity; their distribution can be considered complex rather than normal. When normality is violated, the classification methods that rely on the assumption of normally distributed data are not as successful or accurate. It is hard to detect normality violations in small samples. The segmentation process produces segments that vary highly in size; samples can be very big or very small. This paper investigates whether the complexity within the segment can be addressed using multiple random sampling of segment pixels and multiple calculations of similarity measures. In order to analyze the effect sampling has on classification results, statistics and probability value equations of non-parametric two-sample Kolmogorov-Smirnov test and parametric Student’s t-test are selected as similarity measures in the classification process. The performance of both classifiers was assessed on a WorldView-2 image for four land cover classes (roads, buildings, grass and trees) and compared to two commonly used object-based classifiers—k-Nearest Neighbor (k-NN) and Support Vector Machine (SVM). Both proposed classifiers showed a slight improvement in the overall classification accuracies and produced more accurate classification maps when compared to the ground truth image.

Description: An LC resonant pressure sensor with improved performance is presented in this paper. The sensor is designed with a buried structure, which protects the electrical components from contact with harsh environments and reduces the resonant-frequency drift of the sensor in high-temperature environments. The pressure-sensitive membrane of the sensor is optimized according to small-deflection-plate theory, which allows the sensor to operate in high-pressure environments. The sensor is fabricated using low-temperature co-fired ceramic (LTCC) technology, and a fugitive film is used to create a completed sealed embedded cavity without an evacuation channel. The experimental results show that the frequency drift of the sensor versus the temperature is approximately 0.75 kHz/°C, and the responsivity of the sensor can be up to 31 kHz/bar within the pressure range from atmospheric pressure to 60 bar.

Description: The explosive triacetone triperoxide (TATP), which can be prepared from commercially readily available reagents following an easy synthetic procedure, is one of the most common components of improvised explosive devices (IEDs). Molecularly-imprinted polymer (MIP) electrochemical sensors have proved useful for the determination of different compounds in different matrices with the required sensitivity and selectivity. In this work, a highly sensitive and selective molecularly imprinted polymer with electrochemical capabilities for the determination of TATP has been developed. The molecular imprinting has been performed via electropolymerisation onto a glassy carbon electrode surface by cyclic voltammetry from a solution of pyrrole functional monomer, TATP template and LiClO4. Differential Pulse Voltammetry of TATP, with LiClO4 as supporting electrolyte, was performed in a potential range of −2.0 V to +1.0 V (vs. Ag/AgCl). Three-factor two-level factorial design was used to optimise the monomer concentration at 0.1 mol∙L−1, template concentration at 100 mmol∙L−1 and the number of cyclic voltammetry scan cycles to 10. The molecularly imprinted polymer-modified glassy carbon electrode demonstrated good performance at low concentrations for a linear range of 82–44,300 µg∙L−1 and a correlation coefficient of r2 = 0.996. The limits of detection (LoD) and quantification (LoQ) achieved were 26.9 μg∙L−1 and 81.6 μg∙L−1, respectively. The sensor demonstrated very good repeatability with precision values (n = 6, expressed as %RSD) of 1.098% and 0.55% for 1108 and 2216 µg∙L−1, respectively. It also proved selective for TATP in the presence of other explosive substances such as PETN, RDX, HMX, and TNT.

Description: Delay tracking of spread-spectrum signals is widely used for ranging in radio frequency based navigation. Its use in non-coherent optical ranging, however, has not been extensively studied since optical channels are less subject to narrowband interference situations where these techniques become more useful. In this work, an early-late delay-locked loop adapted to indoor optical ranging is presented and analyzed. The specific constraints of free-space infrared channels in this context substantially differ from those typically considered in radio frequency applications. The tracking stage is part of an infrared differential range measuring system with application to mobile target indoor localization. Spread-spectrum signals are used in this context to provide accurate ranging while reducing the effect of multipath interferences. The performance of the stage regarding noise and dynamic errors is analyzed and validated, providing expressions that allow an adequate selection of the design parameters depending on the expected input signal characteristics. The behavior of the stage in a general multipath scenario is also addressed to estimate the multipath error bounds. The results, evaluated under realistic conditions corresponding to an 870 nm link with 25 MHz chip-rate, built with low-cost up-to-date devices, show that an overall error below 6% of a chip time can be achieved.

Description: Many intelligent transportation system applications require accurate, reliable, and continuous vehicle positioning. How to achieve such positioning performance in extended GPS-denied environments such as tunnels is the main challenge for land vehicles. This paper proposes a hybrid multi-sensor fusion strategy for vehicle positioning in tunnels. First, the preliminary positioning algorithm is developed. The Radio Frequency Identification (RFID) technology is introduced to achieve preliminary positioning in the tunnel. The received signal strength (RSS) is used as an indicator to calculate the distances between the RFID tags and reader, and then a Least Mean Square (LMS) federated filter is designed to provide the preliminary position information for subsequent global fusion. Further, to improve the positioning performance in the tunnel, an interactive multiple model (IMM)-based global fusion algorithm is developed to fuse the data from preliminary positioning results and low-cost in-vehicle sensors, such as electronic compasses and wheel speed sensors. In the actual implementation of IMM, the strong tracking extended Kalman filter (STEKF) algorithm is designed to replace the conventional extended Kalman filter (EKF) to achieve model individual filtering. Finally, the proposed strategy is evaluated through experiments. The results validate the feasibility and effectiveness of the proposed strategy.

Description: This paper analyzed the characteristic of the tourism destination ecosystem from perspective of entropy in Dunhuang City. Given these circumstances, an evaluation index system that considers the potential of sustainable development was formed based on dissipative structure and entropy change for the tourism destination ecosystem. The sustainable development potential evaluation model for tourism destination ecosystem was built up based on information entropy. Then, we analyzed each indicator impact for the sustainable development potential and proposed some measures for the tourism destination ecosystem. The conclusions include: (a) the requirements of Dunhuang tourism destination ecosystem on the natural ecosystem continuously grew between 2000 and 2012; (b) The sustainable development potential of the Dunhuang tourism destination ecosystem was on an oscillation upward trend during the study period, which is dependent on government attention, and pollution problems were improved.

Description: In this study, adiabatic temperature rise tests depending on binder type and adiabatic specimen volume were performed, and the maximum adiabatic temperature rises and the reaction factors for each mix proportion were analyzed and suggested. The results indicated that the early strength low heat blended cement mixture had the lowest maximum adiabatic temperature rise (Q∞) and the ternary blended cement mixture had the lowest reaction factor (r). Also, Q and r varied depending on the adiabatic specimen volume even when the tests were conducted with a calorimeter, which satisfies the recommendations for adiabatic conditions. Test results show a correlation: the measurements from the 50 L specimens were consistently higher than those from the 6 L specimens. However, the Q∞ and r values of the 30 L specimen were similar to those of the 50 L specimen. Based on the above correlation, the adiabatic temperature rise of the 50 L specimen could be predicted using the results of the 6 L and 30 L specimens. Therefore, it is thought that this correlation can be used for on-site concrete quality control and basic research.

Description: Measures of soil and water conservation (SWC) could affect the hydrological process. The impacts of typical measures on groundwater recharge, levels and flow were analyzed based on simulated rainfall experiments and a groundwater model. The three-dimensional finite-difference groundwater flow model (MODFLOW) was calibrated and verified for bare slope, grassland and straw mulching scenarios based on the experiments. The results of the verification in groundwater balance, levels, runoff and flow field all showed that MODFLOW could be applied to study the impact of SWC measures on groundwater. Meanwhile, the results showed the recharge rate (α) and specific yield of the three soil layers (Sy1, Sy2 and Sy3) were the most sensitive parameters to the change in the underlying surface. Then, the impacts of the SWC measures’ construction and destruction on the groundwater regime were studied. The results indicated the measures could strengthen groundwater recharge. The amounts of groundwater recharge, runoff and level were on the order of straw mulching > grassland > bare slope. When the underlying surface was converted from grass and mulching to bare slope, the recharge decreased by 42.2% and 39.1%. It was concluded that SWC measure construction would increase groundwater recharge and the measure destruction would decrease recharge.

Description: The SO2 emissions from coal-fired power plants in China have been regulated since 2005 by a mandatory installation of flue gas desulfurization (FGD) devices. In order to verify the effectiveness of FGD systems applied in power plants, Shanxi (a province well-known for the largest coal reserves in China) was selected, and the characteristic and evolution of SO2 densities over 22 regions with large coal-fired power plants during 2005–2012 were investigated by using the satellite remote sensing data from the Ozone Monitoring Instrument (OMI). A unit-based inventory was also employed to study the trend of SO2 emissions from coal-fired power plants in Shanxi. The results show that the operation of FGD systems was successful in reducing SO2 emissions from power plants during 2005–2010: the mean SO2 densities satellite-observed over those regions with power plants operated before 2005 showed a notable decrease of approximate 0.4 DU; the mean SO2 densities over other regions with power plants newly built behind 2006 did not show a statistical increasing trend overall; the mean SO2 density over the whole Shanxi also showed a moderate decline from 2008 to 2010. However, the polluted conditions over Shanxi during 2011–2012 rebounded and the declining trend in mean SO2 density over the whole Shanxi disappeared again. In comparison of unit-based emission inventory, the emissions calculated show a similar trend with SO2 densities satellite-observed during 2005–2010 and still maintain at a lower volume during 2011–2012. By investigating the developments of other emission sources in Shanxi during 2005–2012, it is considered that the rapid expansion of industries with high coal-consumption has played an important role for the increment rise of SO2 emissions. Lack of an independent air quality monitoring network and the purposeful reduced operation rate of FGD systems occurring in some coal-fired power plants have reduced the effectiveness of SO2 emission reduction policy applied in Shanxi. In view that the SO2 pollution in Shanxi has not been well ameliorated, more reasonable and mandatory policies, such as a national-wide independent monitoring network and installation of FGD systems in other large emission sources, should be pushed out in the near future.

Description: In the title compound, C25H36O6, the two central cyclohexane rings exhibit a chair conformation. The terminal cyclohexene and cyclopentane rings are in half-chair and envelope conformations (with the C atom bearing the methyl substituent as the flap), respectively. The methyl group of the butyrate chain is disordered over two orientations, with a refined occupancy ratio of 0.742 (6):0.258 (6). Intramolecular O—H...O and C—H...O hydrogen bonds are observed. In the crystal, molecules are linked by O—H...O hydrogen bonds into chains running parallel to the a axis.

Description: The asymmetric unit of the title salt, [C22H20O2P]2+[TeI6]2−, consists of one triphenyl(5-oxooxolan-3-yl)phosphanium cation and one half of a hexaiodidotellurate(IV) dianion. The Te atom is located at an inversion centre and is octahedrally coordinated by six I atoms. The Te—I bond lengths range from 2.9255 (9) to 2.9439 (10) Å. The I—Te—I angles between cis-iodide ligands are in the range 87.85 (3)–92.15 (3)°. In the crystal, the components are connected by C—H...I interactions. In the final refinement of the compound a void of 32 Å3 was observed.

Description: The title compounds, C9H7NO3, (1), C10H7NO5, (2), and C14H9NO5, (3), are three potentially anticonvulsant compounds. Compounds (1) and (2) are isoindoline derivatives and (3) is an isoquinoline derivative. Compounds (2) and (3) crystallize with two independent molecules (A and B) in their asymmetric units. In all three cases, the isoindoline and benzoisoquinoline moieties are planar [r.m.s. deviations are 0.021 Å for (1), 0.04 and 0.018 Å for (2), and 0.033 and 0.041 Å for (3)]. The substituents attached to the N atom are almost perpendicular to the mean planes of the heterocycles, with dihedral angles of 89.7 (3)° for the N—O—Cmethyl group in (1), 71.01 (4) and 80.00 (4)° for the N—O—C(=O)O—Cmethyl groups in (2), and 75.62 (14) and 74.13 (4)° for the same groups in (3). In the crystal of (1), there are unusual intermolecular C=O...C contacts of 2.794 (1) and 2.873 (1) Å present in molecules A and B, respectively. There are also C—H...O hydrogen bonds and π–π interactions [inter-centroid distance = 3.407 (3) Å] present, forming slabs lying parallel to (001). In the crystal of (2), the A and B molecules are linked by C—H...O hydrogen bonds, forming slabs parallel to (10-1), which are in turn linked via a number of π–π interactions [the most significant centroid–centroid distances are 3.4202 (7) and 3.5445 (7) Å], forming a three-dimensional structure. In the crystal of (3), the A and B molecules are linked via C—H...O hydrogen bonds, forming a three-dimensional structure, which is consolidated by π–π interactions [the most significant inter-centroid distances are 3.575 (3) and 3.578 (3) Å].

Description: In the title compound, C18H17ClO2S, the dihedral angle between the planes of the benzofuran ring [r.m.s. deviation = 0.013 (1) Å] and the 4-methylphenyl ring is 87.37 (5)°. In the crystal, molecules are linked by C—H...O hydrogen bonds and π–π interactions between the furan and benzene rings of neighbouring molecules [centroid–centroid distance = 3.525 (2) Å]. In addition, an S...S [3.6584 (9) Å] contact is observed.

Description: The title salt, 2C3H8N+·C2O42−, crystallized with six independent allylammonium cations and three independent oxalate dianions in the asymmetric unit. One of the oxalate dianions is nearly planar [dihedral angle between CO2 planes = 1.91 (19)°], while the other two are twisted with angles of 11.3 (3) and 26.09 (13)°. One cation has a synperiplanar (cis) conformation with an N—C—C—C torsion angle of 0.9 (3)°, whereas the five remaining cations are characterized by gauche arrangements, with the N—C—C—C torsion angles ranging from 115.9 (12) to 128.8 (3)°. One of the allylammonium cations is positionally disordered (fixed occupancy ratio = 0.45:0.55). In the crystal, the cations and anions are connected by a number of strong N—H...O and N—H...(O,O) hydrogen bonds, forming layers parallel to (001), with the vinyl groups protruding into the space between the layers.

Description: In the title molecule, C18H19BrN2O, the benzene ring is inclined to the oxadiazole ring by 10.44 (8)°. In the crystal, C—H...π interactions link the molecules in a head-to-tail fashion, forming chains extending along the c-axis direction. The chains are further connected by π–π stacking interactions, with centroid–centroid distances of 3.6385 (7) Å, forming layers parallel to the bc plane.

Description: In order to ascertain the fire resistance performance of recycled aggregate concrete (RAC) components with different concrete compressive strengths, four full-scaled concrete columns were designed and tested under high temperature. Two of the four specimens were constructed by normal concrete with compressive strength ratings of C20 and C30, respectively, while the others were made from recycled coarse aggregate (RCA) concrete of C30 and C40, respectively. Identical constant axial forces were applied to specimens while being subjected to simulated building fire conditions in a laboratory furnace. Several parameters from the experimental results were comparatively analyzed, including the temperature change, vertical displacement, lateral deflection, fire endurance, and failure characteristics of specimens. The temperature field of specimens was simulated with ABAQUS Software (ABAQUS Inc., Provindence, RI, USA) and the results agreed quite well with those from the experiments. Results show that the rate of heat transfer from the surface to the interior of the column increases with the increase of the concrete’s compressive strength for both RAC columns and normal concrete columns. Under the same initial axial force ratio, for columns with the same cross section, those with lower concrete compressive strengths demonstrate better fire resistance performance. The fire resistance performance of RAC columns is better than that of normal concrete columns, with the same concrete compressive strength.

Description: A high accuracy localization technique using Long Term Evolution (LTE) based on a new and accurate multiple carrier noise model has been developed. In the noise consideration, the LTE multiple carriers phase noise has been incorporated so that a new and accurate noise model is achieved. An experiment was performed to characterize the phase noise of carriers at 2 GHz. The developed noise model was incorporated into LTE localization analysis in a high traffic area in Hong Kong to evaluate the accuracy of localization. The evaluation and analysis reveals that the new localization method achieves an improvement of about 10% accuracy comparing to existing widely adopted schemes.

Description: In biomimetics, living systems are imitated to develop receptors for ions, molecules and bioparticles. The most pertinent idea is self-organization in analogy to evolution in nature, which created the key-lock principle. Today, modern science has been developing host-guest chemistry, a strategy of supramolecular chemistry for designing interactions of analytes with synthetic receptors. This can be realized, e.g., by self-assembled monolayers (SAMs) or molecular imprinting. The strategies are used for solid phase extraction (SPE), but preferably in developing recognition layers of chemical sensors.

Description: In three-phase inverters used in uninterruptible power supplies (UPSs), three-limb inductors and three-limb transformers are commonly used in consideration of cost and size. However, magnetic coupling exists between the three phases of the inverter, which can result in complex models. When instantaneous feedback control strategies are introduced to achieve high quality output waveforms, the transient analysis of the closed-loop inverters becomes difficult. In this paper, the phenomenon of magnetic coupling in three-phase inverters due to three-limb inductors and three-limb transformers is analyzed. A decoupled dynamic model is derived based on the instantaneous symmetrical components transformation, which comprises three decoupled equivalent circuits of instantaneous symmetrical components. Analyses based on this model indicate that magnetic coupling may have a significant impact on the performance of three-phase inverters under unbalanced load conditions and transient responses. For three-phase inverters in UPSs with Proportional-Integral-Differential (PID) closed-loop control strategies, the interactive influence between instantaneous closed-loop regulation and magnetic coupling is researched. Finally, a method of reliability analysis and PID controller design for inverters with magnetic coupling is derived. Simulation and experiment results validate the model and conclusions.

Description: The aim of this paper is to present a thermodynamic cycle for the production of electrical power in the 2–5 kW range, suitable for all types of thermally propelled vehicles. The sensible heat recovered from the exhaust gases feeds the energy recovery system, which is able to produce sufficient power to sustain the air conditioning system or other auxiliaries. The working fluids R134a and R245fa have been used in the ORC system, and the systems are simulated by CAMEL-ProTM software. The cycles are generated starting from the same heat source: the exhaust gas of a typical 2.0 L Diesel engine (or from a small size turbine engine). The design of the condenser has been performed to obtain a very compact component, evaluating the heat exchanger tube and fins type design. Through empirical formulas, the area of heat exchange, the heat required to exchange and the pressure drop in the element have been calculated. A commercial software package is used to build the model of the condenser, then a thermal and mechanical analysis and a CFD analysis are realized to estimate the heat exchange. Finally the evaluations, the possible future studies and possible improvements of the system are shown.

Description: Many problems in business and engineering can be modeled as 0-1 knapsack problems. However, the 0-1 knapsack problem is one of the classical NP-hard problems. Therefore, it is valuable to develop effective and efficient algorithms for solving 0-1 knapsack problems. Aiming at the drawbacks of the selection operator in the traditional differential evolution (DE), we present a novel discrete differential evolution (TDDE) for solving 0-1 knapsack problem. In TDDE, an enhanced selection operator inspired by the principle of the minimal free energy in thermodynamics is employed, trying to balance the conflict between the selective pressure and the diversity of population to some degree. An experimental study is conducted on twenty 0-1 knapsack test instances. The comparison results show that TDDE can gain competitive performance on the majority of the test instances.

Description: In this paper, four fractional-order memristor-based Lorenz systems with the flux-controlled memristor characterized by a monotone-increasing piecewise linear function, a quadratic nonlinearity, a smooth continuous cubic nonlinearity and a quartic nonlinearity are presented, respectively. The nonlinear dynamics are analyzed by using numerical simulation methods, including phase portraits, bifurcation diagrams, the largest Lyapunov exponent and power spectrum diagrams. Some interesting phenomena, such as inverse period-doubling bifurcation and intermittent chaos, are found to exist in the proposed systems.

Description: In this paper, based on fixed entropy, the adiabatic equation of state in fractal flow is discussed. The local fractional wave equation for the velocity potential is also obtained by using the non-differential perturbations for the pressure and density of fractal hydrodynamics.

Description: In urban Maroua, Cameroon, improved drinking water sources are available to a large majority of the population, yet this water is frequently distributed through informal distribution systems and stored in home containers (canaries), leaving it vulnerable to contamination. We assessed where contamination occurs within the distribution system, determined potential sources of environmental contamination, and investigated potential pathogens. Gastrointestinal health status (785 individuals) was collected via health surveys. Drinking water samples were collected from drinking water sources and canaries. Escherichia coli and total coliform levels were evaluated and molecular detection was performed to measure human-associated faecal marker, HF183; tetracycline-resistance gene, tetQ; Campylobacter spp.; and Staphylococcus aureus. Statistical analyses were performed to evaluate the relationship between microbial contamination and gastrointestinal illness. Canari samples had higher levels of contamination than source samples. HF183 and tetQ were detected in home and source samples. An inverse relationship was found between tetQ and E. coli. Presence of tetQ with lower E. coli levels increased the odds of reported diarrhoeal illness than E. coli levels alone. Further work is warranted to better assess the relationship between antimicrobial-resistant bacteria and other pathogens in micro-ecosystems within canaries and this relationship’s impact on drinking water quality.

Description: Exploring the relationship between different services has become the focus of ecosystem services research in recent years. The agro-ecosystem, which accounts for one-third of the global land area, provides lots of services but also disservices, depending on resources provided by other systems. In this paper, we explored the agro-ecosystem from four aspects: a summary of different indicators in the agro-ecosystem, input and output changes with time, relationships between different ecosystem services and disservices, and resource contribution to major services, using Luancheng County of North China as the study area. We then used emergy analysis to unify all the indicators. The conclusions were that the agro-ecosystem maintained provisioning and regulating services but with increasing volatility under continued growth in production inputs and disservice outputs. There was a positive correlation between most of the different services and disservices. Rainfall and groundwater resources were the most used input resources in the agro-ecosystem and all other major ecosystem services depended directly on them.

Description: Integrated analysis on socio-economic metabolism could provide a basis for understanding and optimizing regional sustainability. The paper conducted socio-economic metabolism analysis by means of the emergy accounting method coupled with data envelopment analysis and decomposition analysis techniques to assess the sustainability of Qingyang city and its eight sub-region system, as well as to identify the major driving factors of performance change during 2000–2007, to serve as the basis for future policy scenarios. The results indicate that Qingyang greatly depended on non-renewable emergy flows and feedback (purchased) emergy flows, except the two sub-regions, named Huanxian and Huachi, which highly depended on renewable emergy flow. Zhenyuan, Huanxian and Qingcheng were identified as being relatively emergy efficient, and the other five sub-regions have potential to reduce natural resource inputs and waste output to achieve the goal of efficiency. The results of decomposition analysis show that the economic growth, as well as the increased emergy yield ratio and population not accompanied by a sufficient increase of resource utilization efficiency are the main drivers of the unsustainable economic model in Qingyang and call for polices to promote the efficiency of resource utilization and to optimize natural resource use.

Description: In recent years, there has been an increase in the types of marine weapons used in response to diverse hostile threats. However, because marine weapons are only tested under a single set of environmental conditions, failures due to different environmental stresses have been difficult to detect. Hence, this study proposes an environmental test sequence for multi-environment testing. The environmental test sequences for electrical units described in the international standard IEC 60068-1, and for military supply described in the United States national standard MIL-STD-810G were investigated to propose guidelines for the appropriate test sequences. This study demonstrated the need for tests in multiple environments by investigating marine weapon accidents, and evaluated which environmental stresses and test items have the largest impacts on marine weapons using a two-phase quality function deployment (QFD) analysis of operational scenarios, environmental stresses, and environmental test items. Integer programming was used to determine the most influential test items and the shortest environmental test time, allowing us to propose optimal test procedures. Based on our analysis, we developed optimal environmental test sequences that could be selected by a test designer.

Description: A widespread dissemination of improved cooking stoves in the developing world can lead to considerable improvement of health, to reduced pressure on natural woody resources and to substantial reductions of emissions contributing to global warming. A number of programs have aimed to achieve such dissemination, while few of the programs have had any large-scale success. It has been suggested that a more commercial approach, as opposed to subsidized or freely distributed stoves, would achieve a higher level of success. However, a majority of the households that would benefit from an improved stove are poor and cannot afford the cost of the stove, especially if no monetary savings are possible from a more efficient fuel use, i.e., if the fuel used is collected biomass. The aim of this paper is to propose and evaluate a model that might overcome some of the barriers previous programs have experienced. The proposed model involves commercialization of collected fuels. The methods for evaluation include a qualitative assessment of the proposed model aided by the literature on improved cooking stove programs, fuel wood collection and fuel switching together with a quantitative simplistic model calculation of a hypothetical application of the proposed model principles, in order to assess its financial feasibility. The assessment indicates that the model would increase both households’ incentives and means to purchase and use improved cooking stoves. Furthermore, the model could possibly be partly financed based on carbon credits achieved from the reduction of greenhouse gas emissions.

Description: The article “Characteristics of Point Recharge in Karst Aquifers, Water 6: 2782–2807” by N. Somaratne evaluates various recharge estimation techniques applied to four limestone aquifers in South Australia. Somaratne [1] concludes that methods based on watertable fluctuations, groundwater modelling and water budgets are independent of recharge processes, and are therefore superior to the chloride mass balance (CMB) approach for karst aquifers. The current comment offers alternative interpretations from existing field measurements and previous literature, in particular for the Uley South aquifer, which is the focus of much of the article by Somaratne [1]. Conclusions regarding this system are revised, partly to account for the misrepresentation of previous studies. The aeolianite sediments of Uley South are mostly unconsolidated or poorly consolidated, and dissolution features in the calcrete capping provide point infiltration into a predominantly unconsolidated vadose zone, whereas Somaratne’s [1] findings require that the system comprises well-developed conduits in otherwise low-conductivity limestone. Somaratne’s [1] assertion that the basic premise of CMB is violated in Uley South is disputable, given strong evidence of relatively well-mixed groundwater arising from mostly diffuse recharge. The characterization of karst aquifer recharge should continue to rely on multiple techniques, including environmental tracers such as chloride.

Description: This editorial provides an overview of the special issue “Wetlands and Sustainability”. In particular, the special issue contains a review of Paul Keddy’s book “Wetland Ecology” with specific reference to wetland sustainability. It also includes papers addressing wetland data acquisition via radar and remote sensing to better understand wetland system dynamics, hydrologic processes linked to wetland stress and restoration, coastal wetlands land use conflict/management, and wetland utilization for water quality treatment.

Description: Most of the waterborne disease outbreaks observed in North America are associated with rural drinking water systems. The majority of the reported waterborne outbreaks are related to microbial agents (parasites, bacteria and viruses). Rural areas are characterized by high livestock density and lack of advanced treatment systems for animal and human waste, and wastewater. Animal waste from livestock production facilities is often applied to land without prior treatment. Biosolids (treated municipal wastewater sludge) from large wastewater facilities in urban areas are often transported and applied to land in rural areas. This situation introduces a potential for risk of human exposure to waterborne contaminants such as human and zoonotic pathogens originating from manure, biosolids, and leaking septic systems. This paper focuses on waterborne outbreaks and sources of microbial pollution in rural areas in the US, characterization of the microbial load of biosolids and manure, association of biosolid and manure application with microbial contamination of surface and groundwater, risk assessment and best management practice for biosolids and manure application to protect water quality. Gaps in knowledge are identified, and recommendations to improve the water quality in the rural areas are discussed.

Description: The impact of climate change and Baltic Sea level rise on groundwater resources in a shallow, unconfined, low-lying coastal aquifer in Hanko, southern Finland, was assessed using the UZF1 model package coupled with the three-dimensional groundwater flow model MODFLOW to simulate flow from the unsaturated zone through the aquifer. The snow and PET models were used to calculate the surface water availability for infiltration from the precipitation data used in UZF1. Infiltration rate, flow in the unsaturated zone and groundwater recharge were then simulated using UZF1. The simulation data from climate and sea level rise scenarios were compared with present data. The results indicated changes in recharge pattern during 2071–2100, with recharge occurring earlier in winter and early spring. The seasonal impacts of climate change on groundwater recharge were more significant, with surface overflow resulting in flooding during winter and early spring and drought during summer. Rising sea level would cause some parts of the aquifer to be under sea level, compromising groundwater quality due to intrusion of sea water. This, together with increased groundwater recharge, would raise groundwater levels and consequently contribute more surface leakage and potential flooding in the low-lying aquifer.

Description: The authors wish to add the following amendment and correction on their paper published in IJERPH [1]: Page 6139, Line 3 in Paragraph 3: “…Israel, [17,18],…” should read “…Israel and Palestine [17,18]…”. [...]

Description: Longitudinal data enables detecting the effect of aging/time, and as a repeated measures design is statistically more efficient compared to cross-sectional data if the correlations between repeated measurements are not large. In particular, when genotyping cost is more expensive than phenotyping cost, the collection of longitudinal data can be an efficient strategy for genetic association analysis. However, in spite of these advantages, genome-wide association studies (GWAS) with longitudinal data have rarely been analyzed taking this into account. In this report, we calculate the required sample size to achieve 80% power at the genome-wide significance level for both longitudinal and cross-sectional data, and compare their statistical efficiency. Furthermore, we analyzed the GWAS of eight phenotypes with three observations on each individual in the Korean Association Resource (KARE). A linear mixed model allowing for the correlations between observations for each individual was applied to analyze the longitudinal data, and linear regression was used to analyze the first observation on each individual as cross-sectional data. We found 12 novel genome-wide significant disease susceptibility loci that were then confirmed in the Health Examination cohort, as well as some significant interactions between age/sex and SNPs.

Description: To mitigate climate change, city authorities are developing policies in areas such as transportation, housing and energy use, to reduce greenhouse gas emissions. In addition to their effects on greenhouse gas emissions, these policies are likely to have consequences for the wellbeing of their populations for example through changes in opportunities to take physical exercise. In order to explore the potential consequences for wellbeing, we first explore what ‘wellbeing’ is and how it can be operationalised for urban planners. In this paper, we illustrate how wellbeing can be divided into objective and subjective aspects which can be measured quantitatively; our review of measures informs the development of a theoretical model linking wellbeing to policies which cities use to reduce greenhouse gas emissions. Finally, we discuss the extent to which the links proposed in the conceptual model are supported by the literature and how cities can assess wellbeing implications of policies.

Description: Aluminum absorption leads to deposits in several tissues. In this study, we have investigated, to our knowledge for the first time, aluminum deposition in the salivary glands in addition to the resultant cellular changes in the parotid and submandibular salivary glands in a model of chronic intoxication with aluminum citrate in rats. Aluminum deposits were observed in the parotid and submandibular glands. Immunohistochemical evaluation of cytokeratin-18 revealed a decreased expression in the parotid gland with no changes in the submandibular gland. A decreased expression of α-smooth muscle actin was observed in the myoepithelial cells of both glands. The expression of metallothionein I and II (MT-I/II), a group of metal-binding proteins, which are useful indicators for detecting physiological responses to metal exposure, was higher in both glands. In conclusion, we have shown that at a certain time and quantity of dosage, aluminum citrate promotes aluminum deposition in the parotid and submandibular glands, leads to an increased expression of MT-I/II in both the glands, damages the cytoskeleton of the myoepithelial cells in both glands, and damages the cytoskeleton of the acinar/ductal cells of the parotid glands, with the submandibular glands showing resistance to the toxicity of the latter.

Description: Compensatory health beliefs (CHBs) are beliefs that an unhealthy behavior can be compensated with a healthy behavior. In line with the CHBs model, the aim of this study was twofold. First, the study investigated the relationship between autonomous motivation and CHBs that physical inactivity can be compensated by taking the stairs instead of the elevator. Second, the study focused on the associations between CHBs and readiness to use the stairs more often and stair and elevator use. Thus, a cross-sectional online questionnaire was designed that was filled out by 135 participants. Path analysis showed that individuals with stronger autonomous motivation to use the stairs strongly agreed that sedentary behavior could be compensated by taking the stairs instead of the elevator. Moreover, CHBs were positively related to readiness to change behavior, but not to self-reported stair and elevator use. Even though future research is necessary to replicate these findings, autonomous motivation seems to have a positive impact on CHBs which, in turn, might boost an intended behavior change. Thus, promoting possible compensation of physical inactivity might foster the readiness to change the unhealthy behavior.

Description: Climate change puts pressure on existing health vulnerabilities through higher frequency of extreme weather events, changes in disease vector distribution or exacerbated air pollution. Climate change adaptation policies may hold potential to reduce societal inequities. We assessed the role of public health and social justice in European climate change adaptation using a three-fold approach: a document analysis, a critical discourse analysis of a subgroup of strategies, and a ranking of strategies against our social justice framework. The ranking approach favored planning that includes various adaptation types, social issues and infrastructure changes. Themes on values identified in the five subgroup documents showed that risks are perceived as contradictory, technology is viewed as savior, responsibilities need to be negotiated, and social justice is advocated by only a few countries. Of 21 strategy documents assessed overall, those from Austria, England and Sweden received the highest scores in the ranking. Our qualitative assessment showed that in European adaptation planning, progress could still be made through community involvement into adaptation decisions, consistent consideration of social and demographic determinants, and a stronger link between infrastructural adaptation and the health sector. Overall, a social justice framework can serve as an evaluation guideline for adaptation policy documents.

Description: Cervical cancer remains a significant cause of morbidity and mortality for women in developing countries, despite the fact that inexpensive, simple and effective screening methods are available. Visual inspection of the cervix with acetic acid (VIA) can be used as part of a “reen and treat” program to identify precancerous lesions for cryotherapy treatment. This case report details how the VIA screening test was incorporated into the care of a patient presenting to a maternal health clinic in Thomonde, Haiti which was staffed by doctors and medical students from Emory University School of Medicine in collaboration with Haiti Medishare. As demonstrated here, the VIA test requires minimal materials, can be efficiently incorporated into a physical exams, provides immediate results, and is easily demonstrated to and performed by local healthcare providers. The straightforward and sensitive VIA technique is an ideal cervical cancer screening method for resource poor areas.

Description: Estimating forest canopy height from large-footprint satellite LiDAR waveforms is challenging given the complex interaction between LiDAR waveforms, terrain, and vegetation, especially in dense tropical and equatorial forests. In this study, canopy height in French Guiana was estimated using multiple linear regression models and the Random Forest technique (RF). This analysis was either based on LiDAR waveform metrics extracted from the GLAS (Geoscience Laser Altimeter System) spaceborne LiDAR data and terrain information derived from the SRTM (Shuttle Radar Topography Mission) DEM (Digital Elevation Model) or on Principal Component Analysis (PCA) of GLAS waveforms. Results show that the best statistical model for estimating forest height based on waveform metrics and digital elevation data is a linear regression of waveform extent, trailing edge extent, and terrain index (RMSE of 3.7 m). For the PCA based models, better canopy height estimation results were observed using a regression model that incorporated both the first 13 principal components (PCs) and the waveform extent (RMSE = 3.8 m). Random Forest regressions revealed that the best configuration for canopy height estimation used all the following metrics: waveform extent, leading edge, trailing edge, and terrain index (RMSE = 3.4 m). Waveform extent was the variable that best explained canopy height, with an importance factor almost three times higher than those for the other three metrics (leading edge, trailing edge, and terrain index). Furthermore, the Random Forest regression incorporating the first 13 PCs and the waveform extent had a slightly-improved canopy height estimation in comparison to the linear model, with an RMSE of 3.6 m. In conclusion, multiple linear regressions and RF regressions provided canopy height estimations with similar precision using either LiDAR metrics or PCs. However, a regression model (linear regression or RF) based on the PCA of waveform samples with waveform extent information is an interesting alternative for canopy height estimation as it does not require several metrics that are difficult to derive from GLAS waveforms in dense forests, such as those in French Guiana.

Description: Quality segment generation is a well-known challenge and research objective within Geographic Object-based Image Analysis (GEOBIA). Although methodological avenues within GEOBIA are diverse, segmentation commonly plays a central role in most approaches, influencing and being influenced by surrounding processes. A general approach using supervised quality measures, specifically user provided reference segments, suggest casting the parameters of a given segmentation algorithm as a multidimensional search problem. In such a sample supervised segment generation approach, spatial metrics observing the user provided reference segments may drive the search process. The search is commonly performed by metaheuristics. A novel sample supervised segment generation approach is presented in this work, where the spectral content of provided reference segments is queried. A one-class classification process using spectral information from inside the provided reference segments is used to generate a probability image, which in turn is employed to direct a hybridization of the original input imagery. Segmentation is performed on such a hybrid image. These processes are adjustable, interdependent and form a part of the search problem. Results are presented detailing the performances of four method variants compared to the generic sample supervised segment generation approach, under various conditions in terms of resultant segment quality, required computing time and search process characteristics. Multiple metrics, metaheuristics and segmentation algorithms are tested with this approach. Using the spectral data contained within user provided reference segments to tailor the output generally improves the results in the investigated problem contexts, but at the expense of additional required computing time.

Description: Using HyMap data, mineral identification and mineral mapping were conducted on the basis of the spectral absorption index (SAI) and other spectral absorption features in a study area in Tudun, eastern Tien Shan. Alteration minerals, such as calcite, alumina-rich (Al-rich) muscovite, epidote, and antigorite, were explored, and their relative abundance was depicted. A cross-validation was performed, and it showed a high degree of consistency between the imagery results and the results of previous literature. To further validate the mineral mapping from HyMap data, a field survey was carried out and rock samples were collected for quantitative analysis using a Por Infrared Mineral Analyzer (PIMA) and the software affiliated with it. Minerals were discriminated, and their relative abundance was calculated from the spectra. Although we found that the absorption band-depth and SAI agreed well with each other and with the relative abundance of mineral alterations, the spectral absorption band-depth provided a better representation. Finally, ore prospecting of the study area was presented, and we found the distribution and close spatial relationships among the minerals extracted using the HyMap data. In the northern and northwestern part of the Gold-mine area, there was a mineralized muscovite alteration showing a sheet or block distribution. In the Copper-mine area, Al-poor muscovite with a sheet distribution was distributed in the north and northeast region, and Al-rich muscovite showed a block distribution enclosed by the distribution area of Al-poor muscovite. These all showed good ore prospects for the study area.

Description: Many driver assistance systems require knowledge of the vehicle environment. As these systems are increasing in complexity and performance, this knowledge of the environment needs to be more complete and reliable, so sensor fusion combining long, medium and short range sensors is now being used. This paper analyzes the feasibility of using ultrasonic sensors for low cost vehicle-positioning and tracking in the lane adjacent to the host vehicle in order to identify free areas around the vehicle and provide information to an automatic avoidance collision system that can perform autonomous braking and lane change manoeuvres. A laser scanner is used for the early detection of obstacles in the direction of travel while two ultrasonic sensors monitor the blind spot of the host vehicle. The results of tests on a test track demonstrate the ability of these sensors to accurately determine the kinematic variables of the obstacles encountered, despite a clear limitation in range.

Description: Detailed information on tree cover structure is critical for research and monitoring programs targeting African woodlands, including agroforestry parklands. High spatial resolution satellite imagery represents a potentially effective alternative to field-based surveys, but requires the development of accurate methods to automate information extraction. This study presents a method for tree crown mapping based on Geographic Object Based Image Analysis (GEOBIA) that use spectral and geometric information to detect and delineate individual tree crowns and crown clusters. The method was implemented on a WorldView-2 image acquired over the parklands of Saponé, Burkina Faso, and rigorously evaluated against field reference data. The overall detection rate was 85.4% for individual tree crowns and crown clusters, with lower accuracies in areas with high tree density and dense understory vegetation. The overall delineation error (expressed as the difference between area of delineated object and crown area measured in the field) was 45.6% for individual tree crowns and 61.5% for crown clusters. Delineation accuracies were higher for medium (35–100 m2) and large (≥100 m2) trees compared to small (〈35 m2) trees. The results indicate potential of GEOBIA and WorldView-2 imagery for tree crown mapping in parkland landscapes and similar woodland areas.

Description: Total suspended solid (TSS) is an important water quality parameter. This study was conducted to test the feasibility of the band combination of hyperspectral sensing for inland turbid water monitoring in Taiwan. The field spectral reflectance in the Wu river basin of Taiwan was measured with a spectroradiometer; the water samples were collected from the different sites of the Wu river basin and some water quality parameters were analyzed on the sites (in situ) as well as brought to the laboratory for further analysis. To obtain the data set for this study, 160 in situ sample observations were carried out during campaigns from August to December, 2005. The water quality results were correlated with the reflectivity to determine the spectral characteristics and their relationship with turbidity and TSS. Furthermore, multiple-regression (MR) and artificial neural network (ANN) were used to model the transformation function between TSS concentration and turbidity levels of stream water, and the radiance measured by the spectroradiometer. The value of the turbidity and TSS correlation coefficient was 0.766, which implies that turbidity is significantly related to TSS in the Wu river basin. The results indicated that TSS and turbidity are positively correlated in a significant way across the entire spectrum, when TSS concentration and turbidity levels were under 800 mg·L−1 and 600 NTU, respectively. Optimal wavelengths for the measurements of TSS and turbidity are found in the 700 and 900 nm range, respectively. Based on the results, better accuracy was obtained only when the ranges of turbidity and TSS concentration were less than 800 mg·L−1 and less than 600 NTU, respectively and used rather than using whole dataset (R2 = 0.93 versus 0.88 for turbidity and R2 = 0.83 versus 0.58 for TSS). On the other hand, the ANN approach can improve the TSS retrieval using MR. The accuracy of TSS estimation applying ANN (R2 = 0.66) was better than with the MR approach (R2 = 0.58), as expected due to the nonlinear nature of the transformation model.

Description: Security and privacy issues in medical wireless body area networks (WBANs) constitute a major unsolved concern because of the challenges posed by the scarcity of resources in WBAN devices and the usability restrictions imposed by the healthcare domain. In this paper, we describe a WBAN architecture based on the well-known publish-subscribe paradigm. We present two protocols for publishing data and sending commands to a sensor that guarantee confidentiality and fine-grained access control. Both protocols are based on a recently proposed ciphertext policy attribute-based encryption (CP-ABE) scheme that is lightweight enough to be embedded into wearable sensors. We show how sensors can implement lattice-based access control (LBAC) policies using this scheme, which are highly appropriate for the eHealth domain. We report experimental results with a prototype implementation demonstrating the suitability of our proposed solution.

Description: In this paper, the parameters identification and synchronization problem of fractional-order neural networks with time delays are investigated. Based on some analytical techniques and an adaptive control method, a simple adaptive synchronization controller and parameter update laws are designed to synchronize two uncertain complex networks with time delays. Besides, the system parameters in the uncertain network can be identified in the process of synchronization. To demonstrate the validity of the proposed method, several illustrative examples are presented.

Description: Ozone concentrations in the Mediterranean area regularly exceed the maximum levels set by the EU Air Quality Directive, 2008/50/CE, a maximum 8-h mean of 120 μg·m-3, in the summer, with consequences for both human health and agriculture. There are a number of reasons for this: the particular geographical and meteorological conditions in the Mediterranean play a part, as do anthropogenic ozone precursor emissions from around the Mediterranean and continental Europe. Ozone concentrations measured on-board the Italian Research Council’s R. V. Urania during summer oceanographic campaigns between 2000 and 2010 regularly exceeded 60 ppb, even at night. The WRF/Chem (Weather Research and Forecasting (WRF) model coupled with Chemistry)model has been used to simulate tropospheric chemistry during the periods of the measurement campaigns, and then, the same simulations were repeated, excluding the contribution of maritime traffic in the Mediterranean to the anthropogenic emissions inventory. The differences in the model output suggest that, in large parts of the coastal zone of the Mediterranean, ship emissions Atmosphere 2014, 5 938 contribute to 3 and 12 ppb to ground level daily average ozone concentrations. Near busy shipping lanes, up to 40 ppb differences in the hourly average ozone concentrations were found. It seems that ship emissions could be a significant factor in the exceedance of the EU directive on air quality in large areas of the Mediterranean Basin.

Description: and projection. Although China is the world's most populous country with approximately a fifth of the world's population, none of the empirical tables from mainland China were used in calibrating the existing models. In this paper, we applied recent three model life table systems with different inputs to China mortality data to investigate whether or not these systems truly reflect Chinese mortality epidemiological patterns and whether or not system biases exist. The resulting residuals show that, in most cases, the male infant mortality rate (1q0), adult mortality rate (45q15) and old age mortality rate (20q60) have a strong bias towards being overestimated and the life expectancy at birth (e0) bias is underestimated. We also give the detailed results for each case. Furthermore, we found that the average relative errors (AREs) for females are more than those for males for e0, 45q15 and 20q60, but for 1q0, males have larger AREs in the Wilmoth and Murray systems. We also found that the urban population has more errors than the rural population in almost all cases. Finally, by comparing the AREs with 10 other countries, we found the errors for China are more than those for other countries in most cases. It is concluded that these existing model life table systems cannot accurately reflect Chinese mortality epidemiological situations and trajectories. Therefore, model life tables should be used with caution when applied to China on the basis of 5q0.

Description: Objective: To assess the impact of different smoking behaviors of caregivers on environmental tobacco smoke (ETS) exposure in children aged 5–6 years in Changsha, China. Methods: We conducted a cross-sectional, random digit-dial telephone survey of caregivers (n = 543) between August and October 2013. Caregivers’ smoking behaviors were collected by a questionnaire. Exposure assessment was based upon determination of urinary cotinine levels in children employing gas chromatography–triple quadrupole mass spectrometry (GC-MS/MS). Results: In children not living with a smoker, children living with one smoker, and children living with more than one smoker at home, median urinary cotinine concentrations (ng/mL) were 0.72, 2.97, and 4.46, respectively. For children living with one smoker, median urinary cotinine levels of children exposed to ETS were associated with caregiver smoking behaviors, i.e., if a caregiver consumed more cigarettes (>20 compared with ≤10; 7.73 versus 2.29 ng/mL, respectively). Conclusions: The magnitude of ETS exposure in children is correlated with the smoking behaviors of the caregiver. Counseling for smoking cessation and educational interventions are needed urgently for smoking caregivers to increase their awareness about ETS exposure and to encourage smoking cessation at home or to take precautions to protect children’s health.

Description: Lentinus edodes, a functional food, was evaluated as a potential antidote for adsorption/removal of cadmium ion from simulated gastrointestinal fluids. An adsorption/removal capacity of 65.12 mg/g was achieved by L. edodes in solutions with a pH ranging from 2.5 to 6.0, while little if any adsorption was observed in solutions with a pH under 2.5. In solutions with pH 6.0, 84% of the cadmium adsorption by L. edodes occurred in the first minute. Scanning electronic microscopic examination showed that the cell wall polysaccharides of L. edodes provided a rough sponge-like surface for effective cadmium adsorption. FTIR indicated that the carboxyl, hydroxyl and –NH groups of the cell wall polysaccharides and proteins were the primary functional groups that chemically bind with cadmium ions. The energy dispersive spectrometry further revealed that cation exchange might be attributed to cadmium biosorption. These results suggested that L. edodes was effective for cadmium detoxication, especially in low concentration.

Description: Hollow alginate microfibers (od = 1.3 mm, id = 0.9 mm, th = 400 µm, L = 3.5 cm) comprised of 2% (w/v) medium molecular weight alginate cross-linked with 0.9 M CaCl2 were fabricated to model outward diffusion capture by 2D fluorescent microscopy. A two-fold comparison of diffusivity determination based on real-time diffusion of Fluorescein isothiocyanate molecular weight (FITC MW) markers was conducted using a proposed Fickian-based approach in conjunction with a previously established numerical model developed based on spectrophotometric data. Computed empirical/numerical (Dempiricial/Dnumerical) diffusivities characterized by small standard deviations for the 4-, 70- and 500-kDa markers expressed in m2/s are (1.06 × 10−9 ± 1.96 × 10−10)/(2.03 × 10−11), (5.89 × 10−11 ± 2.83 × 10−12)/(4.6 × 10−12) and (4.89 × 10−12 ± 3.94 × 10−13)/(1.27 × 10−12), respectively, with the discrimination between the computation techniques narrowing down as a function of MW. The use of the numerical approach is recommended for fluorescence-based measurements as the standard computational method for effective diffusivity determination until capture rates (minimum 12 fps for the 4-kDa marker) and the use of linear instead of polynomial interpolating functions to model temporal intensity gradients have been proven to minimize the extent of systematic errors associated with the proposed empirical method.

Description: This study set out to explore the relationship between female media use behavior and agreement with agenda-specific publicly promoted health messages. A random digit dial telephone cross-sectional survey was conducted using a nationally representative sample of female residents aged 25 and over. Respondents’ agreement with health messages was measured by a six-item Health Information Scale (HIS). Data were analyzed using chi-square tests and multiple logistic regression. This survey achieved a response rate of 86% (n = 1074). In this study the longest duration of daily television news watching (OR = 2.32), high self-efficacy (OR = 1.56), and greater attention to medical and health news (OR = 5.41) were all correlates of greater agreement with the selected health messages. Surprisingly, Internet use was not significant in the final model. Many women that public health interventions need to be targeting are not receptive to health information that can be accessed through Internet searches. However, they may be more readily targeted by television campaigns. Agenda-specific public health campaigns aiming to empower women to serve as nodes of information transmission and achieve efficient trickle down through the family unit might do better to invest more heavily in television promotion.

Description: Wireless Sensor Networks deliver valuable information for long periods, then it is desirable to have optimum performance, reduced delays, low overhead, and reliable delivery of information. In this work, proposed metrics that influence energy consumption are used for a performance comparison among our proposed routing protocol, called Multi-Parent Hierarchical (MPH), the well-known protocols for sensor networks, Ad hoc On-Demand Distance Vector (AODV), Dynamic Source Routing (DSR), and Zigbee Tree Routing (ZTR), all of them working with the IEEE 802.15.4 MAC layer. Results show how some communication metrics affect performance, throughput, reliability and energy consumption. It can be concluded that MPH is an efficient protocol since it reaches the best performance against the other three protocols under evaluation, such as 19.3% reduction of packet retransmissions, 26.9% decrease of overhead, and 41.2% improvement on the capacity of the protocol for recovering the topology from failures with respect to AODV protocol. We implemented and tested MPH in a real network of 99 nodes during ten days and analyzed parameters as number of hops, connectivity and delay, in order to validate our Sensors 2014, 14 22812 simulator and obtain reliable results. Moreover, an energy model of CC2530 chip is proposed and used for simulations of the four aforementioned protocols, showing that MPH has 15.9% reduction of energy consumption with respect to AODV, 13.7% versus DSR, and 5% against ZTR.

Description: An automated traffic measuring system for use on multiple drive lanes is proposed in this paper. This system, which uses ultrasonic sensors and a lateral scanning method, is suitable for use on real traffic roads. The proposed system can be easily established and maintained in various roadway environments. In addition, the system can be adjusted to measure traffic volumes according to the size and number of drive lanes. This paper describes the results of an experiment that the lateral scanning method can be easily applied to real traffic roads and provide a low error rate and real-time responses. This system can play an important role in accurately measuring traffic volumes as part of an intelligent transportation system.

Description: This paper investigates the state of food security in Romania and its place in the world. We analysed the level of food security indicators for 1990–2012, in Romania, and their average levels worldwide. References are also made to developed and developing countries. The research seeks to answer the questions: Is food security achieved in Romania and, if so, what kind of structural changes can be made towards improving food quality and people’s living standards? As indicators show, the findings indicate that food security is ensured, on average, in Romania. Dietary energy supply is above dietary energy requirements, the ratio of cereals import dependency is below its average level worldwide, and the daily diet is balanced between vegetal and animal origin food. Having solved the quantitative aspect of food security, Romania can look towards improving the qualitative aspects of it. In this regard, organic food may be considered as a direction of developing sustainable agricultural economy.

Description: Solar surface irradiance is an important variable in many different fields, e.g., climate monitoring and solar energy. Remote sensing data are nowadays well established and the only observational data source in many regions of the world. Aerosols significantly affect the clear sky radiation and hence also the all sky radiation. In order to achieve the optimal accuracy for surface radiation, information of aerosols with low uncertainty is needed. In this study, the effect of four different aerosol climatologies on the solar surface radiation have been evaluated for the period 2006–2009 at nine BSRN stations. The use of the aerosol climatology from the European Center of Medium Weather Forecast (MACC) leads to the highest accuracy of solar radiation. The mean absolute bias is 6.8 Watt per square meter for global irradiance and 11.3 for direct irradiance. With the Max-Planck climatology (MAC-v1) 9.4 and 14.8 Watt per square meter and with GADS/OPAC (Global Aerosol Data Set/Optical Properties of Aerosols and Clouds) 10.0 and 14.6 Watt per square meter have been achieved, respectively. The improvement in the accuracy of solar radiation by using the MACC climatology is relatively large. Also remarkable is that the new MAC-v1 climatology and the older GADS/OPAC climatology performs on the same level with respect to the achieved accuracy in radiation. The effect of interannual variations of Aerosol Optical Depth (AOD) on the global irradiance is rather low for the investigated sites and period.

Description: Autonomic activity affects beat-to-beat variability of heart rate and QT interval. The aim of this study was to explore whether entropy measures are suitable to detect changes in neural outflow to the heart elicited by two different stress paradigms. We recorded short-term ECG in 11 normal subjects during an experimental protocol that involved head-up tilt and mental arithmetic stress and computed sample entropy, cross-sample entropy and causal interactions based on conditional entropy from RR and QT interval time series. Head-up tilt resulted in a significant reduction in sample entropy of RR intervals and cross-sample entropy, while mental arithmetic stress resulted in a significant reduction in coupling directed from RR to QT. In conclusion, measures of entropy are suitable to detect changes in neural outflow to the heart and decoupling of repolarisation variability from heart rate variability elicited by orthostatic or mental arithmetic stress.

Description: Public fitness centers and exercise facilities have been implicated as possible sources for transmitting community-acquired bacterial infections. However, the overall diversity of the bacterial community residing on the surfaces in these indoor environments is still unknown. In this study, we investigated the overall bacterial ecology of selected fitness centers in a metropolitan area (Memphis, TN, USA) utilizing culture-independent pyrosequencing of the 16S rRNA genes. Samples were collected from the skin-contact surfaces (e.g., exercise instruments, floor mats, handrails, etc.) within fitness centers. Taxonomical composition revealed the abundance of Firmicutes phyla, followed by Proteobacter and Actinobacteria, with a total of 17 bacterial families and 25 bacterial genera. Most of these bacterial genera are of human and environmental origin (including, air, dust, soil, and water). Additionally, we found the presence of some pathogenic or potential pathogenic bacterial genera including Salmonella, Staphylococcus, Klebsiella, and Micrococcus. Staphylococcus was found to be the most prevalent genus. Presence of viable forms of these pathogens elevates risk of exposure of any susceptible individuals. Several factors (including personal hygiene, surface cleaning and disinfection schedules of the facilities) may be the reasons for the rich bacterial diversity found in this study. The current finding underscores the need to increase public awareness on the importance of personal hygiene and sanitation for public gym users.

Description: Given the advances in remotely sensed imagery and associated technologies, several global land cover maps have been produced in recent times including IGBP DISCover, UMD Land Cover, Global Land Cover 2000 and GlobCover 2009. However, the utility of these maps for specific applications has often been hampered due to considerable amounts of uncertainties and inconsistencies. A thorough review of these global land cover projects including evaluating the sources of error and uncertainty is prudent and enlightening. Therefore, this paper describes our work in which we compared, summarized and conducted an uncertainty analysis of the four global land cover mapping projects using an error budget approach. The results showed that the classification scheme and the validation methodology had the highest error contribution and implementation priority. A comparison of the classification schemes showed that there are many inconsistencies between the definitions of the map classes. This is especially true for the mixed type classes for which thresholds vary for the attributes/discriminators used in the classification process. Examination of these four global mapping projects provided quite a few important lessons for the future global mapping projects including the need for clear and uniform definitions of the classification scheme and an efficient, practical, and valid design of the accuracy assessment.

Description: High accuracy attitude and position determination is very important for underwater gliders. The cross-coupling among three attitude angles (heading angle, pitch angle and roll angle) becomes more serious when pitch or roll motion occurs. This cross-coupling makes attitude angles inaccurate or even erroneous. Therefore, the high accuracy attitude and position determination becomes a difficult problem for a practical underwater glider. To solve this problem, this paper proposes backing decoupling and adaptive extended Kalman filter (EKF) based on the quaternion expanded to the state variable (BD-AEKF). The backtracking decoupling can eliminate effectively the cross-coupling among the three attitudes when pitch or roll motion occurs. After decoupling, the adaptive extended Kalman filter (AEKF) based on quaternion expanded to the state variable further smoothes the filtering output to improve the accuracy and stability of attitude and position determination. In order to evaluate the performance of the proposed BD-AEKF method, the pitch and roll motion are simulated and the proposed method performance is analyzed and compared with the traditional method. Simulation results demonstrate the proposed BD-AEKF performs better. Furthermore, for further verification, a new underwater navigation system is designed, and the three-axis non-magnetic turn table experiments and the vehicle experiments are done. The results show that the proposed BD-AEKF is effective in eliminating cross-coupling and reducing the errors compared with the conventional method.