ALBERT

Description: The development of this paper was inspired by the increase in the number of different eco-label like quality assurance schemes established in the European Union in the past few years. These schemes are flooding the market and the researchers raise the question, is there enough credibility in these schemes? This piece of research is based on 58 eco-labeling like food schemes and dissects them into the building blocks of the different factors that makes a scheme credible and analyses the structure of these blocks as well as a literature survey on the perceptions of both the consumers and producers to these schemes. The sort of credibility structure that the building blocks of the schemes (ownership, stakeholder dialogue, traceability, transparency, etc.) have created was discussed and it was questioned if they meet the expectations of the consumers. The main findings of the research indicate that although small groups of consumers may be satisfied with a number of the different schemes, the majority of them fall short of providing a credible quality assurance scheme. Improvements were suggested such as involving a more diverse range of stakeholders and expanding the responsibility of processors and retailers. An alternative to the current form of labeling is also discussed.

Description: Selbstverständlich schafft Windenergie Arbeitsplätze. Betrachtet man die Studie des Bremer Energie-Institutes näher, so zeigen sich einige methodische Schwächen und wenig plausible Annahmen. Von einer "nüchternen Analyse" kann deswegen nicht gesprochen werden.

Description: New energy efficiency policies have been introduced around the world. Historically, most energy models were reasonably equipped to assess the impact of classical policies, such as a subsidy or change in taxation. However, these tools are often insufficient to assess the impact of alternative policy instruments. We evaluate the so-called engineering economic models used to assess future industrial energy use. Engineering economic models include the level of detail commonly needed to model the new types of policies considered. We explore approaches to improve the realism and policy relevance of engineering economic modeling frameworks. We also explore solutions to strengthen the policy usefulness of engineering economic analysis that can be built from a framework of multidisciplinary cooperation. The review discusses the main modeling approaches currently used and evaluates the weaknesses in current models. We focus on the needs to further improve the models. We identify research priorities for the modeling framework, technology representation in models, policy evaluation, and modeling of decision-making behavior.

Description: This book presents important new research on applied eco-efficiency concepts throughout Europe. The aim of eco-efficiency is to achieve market-based measures of environmental protection, in order to enhance the prospects for sustainable development and achieve positive economic and ecological benefits. The distinguished authors discuss a number of themes surrounding eco-efficiency including the necessary conditions for technological dissemination and ecological modernization, and the role of government in enabling businesses and society to participate actively in this process. In particular, they highlight the application of existing European-based policies concerning material flows and energy. The authors also investigate some new concepts of sustainable development and provide a useful introduction to material flows analysis. In further chapters they study the emerging regulatory policies for eco-efficiency, and examine the issues of sustainable business and consumption strategies.

Description: Transnational corporations' (TNCs) economic operations cover numerous countries and can be diverted between several continents. These units have reached a level of significance, having not only economic, but also social and environmental implications. This justifies that they shall be treated separately as a social phenomenon, when considering strategies for the development towards sustainability. This paper presents the concept of Responsible Corporate Governance (RCG), as a strategy to "govern" TNCs. RCG is suggested as a stakeholder based policy instrument, which aims at allocating responsibilities to societal actors aiming at corporate accountability. RCG recognises that the process of societal change is strongly based on what can be called as bottom up-processes. Learning processes take place through the interaction of the different societal members, which eventually leads to macro changes. Therefore, governing TNCs towards sustainability improvements is considered to be a collective process including all stakeholders. Firstly, the paper places the concept of RCG in the ongoing debate of political modernization based on the fact that society develops overtime and the political system must correspondingly modernize. In this context, political overload developed as a consequence of increased resource interdependencies is explained and as a resolution, network approach is discussed. Secondly, demands on the orientation of the TNCs in terms of accountability and innovative action are brought forward. Here, the paper also lists down corporate elements (stakeholder empowered corporate governance, management and performance evaluation systems, transparency enhancement and accountability verification), which need to be in place to attain an accountable orientation in the society. Following, using an analytical framework, the orientation and capabilities of each societal actor (environmental non-governmental organisations, financial institutions, intergovernmental organisations) to affect improvements in the corporate responsibility elements are investigated and recommendations for their effective orientation are listed.

Description: In jedem Unternehmen gibt es Potenziale, um die eigene wirtschaftliche Position zu verbessern und sich gegen zukünftige Krisen abzusichern. Technische, organisatorische oder soziale Innovationen sind der Schlüssel zur dauerhaften Sicherung ihrer Wettbewerbsposition. Diese Broschüre soll kleinen und mittelständischen Unternehmen helfen, Bereiche zu finden, in denen Innovationspotenziale vorhanden sind. Anhand erster Maßnahmen, so genannten Innovationsschritten, werden Ansatzpunkte entwickelt, wie mit möglichst geringem (Zeit- und Kosten-) Aufwand gezielt die eigene Wettbewerbsposition gestärkt werden kann. Sie wendet sich an Unternehmensleitung oder Umweltmanagementbeauftragte und gibt ihnen einen ersten Ein- bzw. Überblick und konkrete Vorschläge, wie sie die Zukunftsfähigkeit ihres Unternehmens verbessern können. Damit hat diese Broschüre konkrete Hilfestellungen für den Praktiker im Unternehmen im Fokus. Mögliche Ansatzpunkte, geeignete Wege sowie passende Instrumente werden für einzelne Bereiche aufgezeigt und erläutert.

Description: Diese Studie untersucht die Medien, die sanktionsbereiten Konsumenten Informationen über die Verantwortung von Unternehmen als Orientierungshilfe für den Einkauf anbieten. Im Brennpunkt stehen dabei sozial-ökologisch orientierte Einkaufsführer, die vergleichende Unternehmensbewertungen mit dem Ziel anbieten, Verbrauchern eine Informationsgrundlage für positive und negative Sanktionen zu geben, um einen positiven Profilierungswettbewerb in Gang zu setzen. Dabei gilt das besondere Interesse dem Übergang vom Printmedium zum Internetauftritt. Ziel der Untersuchung ist eine Analyse fördernder und hemmender Faktoren für den Erfolg, die für die Praxis nützlich sein soll.

Description: Infrastrukturen und Infrastrukturpolitik nehmen einen entscheidenden Einfluss auf die Nachhaltigkeit eines Landes. Betrachtet man die (Fehl-) Entwicklungen des letzten Jahrhunderts in den Industrieländern, so ist zu erkennen, dass die derzeitigen Energie-, Verkehrs- und Wasserinfrastrukturen selbst den Anforderungen einer ökonomischen Nachhaltigkeit nicht gewachsen sind. Ihre sozialen und ökologischen Folgen wurden zudem meist vernachlässigt und spielten bei Entscheidungsprozessen nur eine nachrangige Rolle. Große Herausforderungen liegen vor den Industrieländern, wenn sie nachhaltige Infrastrukturen schaffen wollen - und gar eine Leitbildfunktion für Schwellen- und Entwicklungsländer im 21. Jahrhundert einnehmen möchten. Denn durch die Intensivierung der weltweiten Austauschbeziehungen werden die nicht-nachhaltigen Infrastrukturkonzepte und -politiken der Industrieländer zunehmend auf Entwicklungsländer übertragen. Eine Umorientierung muss deshalb auch im Süden erfolgen. Dieses Wuppertal Paper bietet am Beispiel der drei wichtigen Sektoren Energie, Verkehr und Wasser Ansätze einer nachhaltigen Infrastrukturpolitik. Dazu gehören sowohl globale Lösungsstrategien als auch spezifische Instrumente für die Länder des Nordens oder des Südens. Im Rahmen von sektoralen Fallstudien werden die Schwellenländer Brasilien (Energie), China (Verkehr) und Indonesien (Wasser) betrachtet. Zudem werden Strategien und Erfolgsfaktoren für eine an Nachhaltigkeitszielen orientierte Transferpolitik skizziert, wobei auch auf die Bedeutung von Bildung und die Rolle internationaler Finanzinstitutionen (am Beispiel der Weltbank) eingegangen wird. Um die großen Herausforderungen einer globalen nachhaltigen Entwicklung zu bewältigen, schlägt dieses Papier vor, mehrere Strategien parallel zu verfolgen. Im Norden sind die gegenwärtigen ressourcenintensiven, nicht-nachhaltigen Infrastrukturen zu überdenken. Im Süden sollte der Pfad der "nachholenden Entwicklung" verlassen und im Sinne eines ökologischen "leapfrogging" der Sprung in post-fossile Infrastrukturen angestrebt werden, um nicht die Fehler des Nordens zu wiederholen. Länderspezifische Lösungen sollten dabei an die Stelle eines Imports nicht-angepasster Infrastrukturen treten. Der Transfer und Austausch von Ideen, Konzepten und Lösungen kann dabei einen wesentlichen Beitrag leisten, wobei eine unidirektionale Entwicklungszusammenarbeit von Nord nach Süd nicht ausreicht. Auch Süd-Süd oder Süd-Nord-Kooperationen eröffnen wichtige Chancen. Zudem ist der industrieländerzentrische, Technologie orientierte Ansatz einer einfachen Optimierung der supply-side zu verlassen zugunsten einer Handlungsstrategie, die ein nachhaltiges demand-side-management integriert.

Description: An increasing number of publications about theoretical approaches and new findings illustrate the relevance of the topic environmental risk assessment. The actual discussion about high oil prices is not incorporated under this headline; but it should be, as natural resource scarcity is a crucial economic factor. In practical experience, more and more banks, insurance companies as well as investors realize that there are certain areas with a high correlation between sustainable development and corporate success, corporate risk exposure and corporate performance. In this discussion one of the most obvious topics are risks related to climate change. According to the findings of surveys evaluated in this paper climate change starts to affect economic development and companies' performance in various ways. Over the next decade, economic losses due to climate change are estimated by US$ 150 billion per year. As result world's business leaders have described climate change as the biggest challenge of the 21st century. Hence, the incorporation of climate change as a risk factor is essential, but risks related to climate change feature a severe issue of complex structure and uncertainty; traditional risk assessment tools appear in the light of not being able to either reflect the multifaceted system nor provide sufficient outcomes. Environmental risk assessments in general so far have mainly emphasized - if at all - on actual and possible impacts of the release of materials or emissions (external effects). But an overall sustainable risk assessment has also to take into account the risks related to the inflow of materials. The main reason for neglecting the inflow risks from an environmental perspective can be seen in the fact that these risks seem to be less tangible and more uncertain. Nevertheless, in a world where economic development and the use of natural resources is not uncoupled yet, a steadily increasing economic power will result in a continually rising extraction of resources. As all resources are limited, the risk of scarcity will rise; and the example of water illustrates that it already exists. Indeed, scarcity is not tangible for all kind of resources from a present point of view. Hence, a specified analysis is needed considering different market and supply conditions. A comprehensive analysis of environmental risks needs to encompass risks affecting the output as well as the input side of a value chain. This paper enlarges the discussion on environmental risk assessments upon the input dimension using the example of carbon risks. Firstly, carbon risks are defined as risks related to climate change at the corporate level with a focus on the input as well as the output dimension. Secondly, an analysis of the current discussion on the topic of carbon risk evaluates the status quo of scientific work in this field. Thirdly, in terms of developing a practically oriented tool, the Value-at-Risk approach and it's application to measure input oriented carbon risks are scrutinized. The results discuss how future volatility and market prices can be utilized to describe the uncertainty resulting from markets acknowledging and pricing oil scarcity as a risk factor. Finally recommendations with a focus on strategic management decisions and financial performance analysis are given and further research opportunities are drawn. The conclusion is; once markets have acknowledged the depletion mid-point as a measure of oil scarcity, natural scarcity will result in a significant higher Value-at-Risk. The Value-at-Risk of one barrel of crude oil could then be as high as US$ 15.5 in the short term and even US$ 17.2 in the long term. The scope of this paper is neither intended to predict one likely development nor to demonstrate how this tool can actually work in terms of forecasting single companies' performance. But in order to point the way ahead, this paper provides scenarios for potential future developments and sets a frame for risk assessments due to oil scarcity.

Description: Der neoliberalen Globalisierung liegen Rationalitätsmuster zugrunde, die weder neu, noch liberal sind. Dies gilt für herrschaftliches Denken über Natur (als Ressource) ebenso wie für den sich verstärkenden Zugriff auf Naturgüter und die Ausblendung reproduktiver Elemente aus der Debatte über Umgangsweisen mit Natur. Mit Blick auf Landnutzung und Livelihood wird lokale Vielfalt durch Globalisierung zerstört. Der Absolutheitsanspruch eines weltweit entfesselten Marktes mit seinem grenzenlos freien Wettbewerb untergräbt das Recht auf- und die Möglichkeit zu je eigener, der Lokalität gemäßer Naturnutzung. Wenn immer mehr Menschen ihrer an die jeweiligen Lokalitäten gebundenen Produktionsmittel beraubt werden, können sich Gesellschaften nicht von innen heraus nachhaltig entwickeln.

Description: This paper examines the connection between globalisation, with its growth in world trade links, and certain ecological effects especially concerning "North-South" relations. Although world trade in the mid-nineties was significantly uncoupled from growth trends in the world economy, so that since then it has increased nearly three times faster than the global GDP, certain indicators of energy use and CO2 emissions have not developed proportionately to world trade; globalisation evidently does not lead to a situation where pressures on the environment are increasing to the same extent worldwide. This de-linking may, however, result in the kind of shifts that we examine here with reference to the material trade flows of the European Union. It will be shown that, in the course of globalisation, the countries of the EU have increasingly shifted environmental burdens on to the countries of the South, especially in the form of ecological rucksacks of imported raw materials, while at the same time reducing the pressure on their own domestic environment by extracting fewer material resources. Furthermore, goods whose production places intensive pressure on the environment (industrial emissions into the atmosphere and water, heavy metal emissions, etc.) have been increasingly imported from newly industrializing or developing countries. The greater covering of material requirements from foreign resources has served not so much the EU's internal consumption as its own production of export goods; this shows that the EU has an increasing share in the resource requirement of other economies. The paper concludes that it is absolutely necessary to consider the international dimension in any strategy for more productive use of resources in industrial countries. In the long term, the EU's resource use should also be reduced in absolute terms. This will also be necessary in order to reduce the pressure on the environment due to imports and exports.

Description: Die "Ökonomie der Aufmerksamkeit" hat zur Herausbildung spezifischer Märkte für Kommunikations-, Media- und Marketingdienstleistungen geführt. Ein dynamisch wachsender Markt ist der Markt für Live-Kommunikation, der in dieser Arbeit vertiefend untersucht wird. Hierbei werden drei Fragen diskutiert: 1. Was sind die treibenden Faktoren und Trends der Live-Kommunikation? 2. Nach welchen Maßstäben werden Events, insbesondere im Bereich der Unternehmenskommunikation, beauftragt? 3. Welche Chancen bestehen in diesem Markt, Events für Nachhaltigkeit als Marktsegment zu etablieren und zu stärken? Bei der Beantwortung dieser Fragen werden aktuelle Trendstudien ausgewertet, aber auch auf Untersuchungen und Fallstudien zurückgegriffen, die im Rahmen des Projektes "Eventkultur und Nachhaltigkeit" durchgeführt wurden. Die Autoren kommen zu dem Ergebnis, dass die Markt- und Trendstudien eine wichtige Orientierungsfunktion für die Eventwirtschaft haben. Aus der Perspektive eines kulturökonomischen Ansatzes wird kritisiert, dass diese Orientierungsfunktion auf Marken und Marketingtechniken beschränkt ist und der Einfluss der gesellschaftlichen Wertbildung auf die Marketingpraxis ausgeblendet bleibt. Nachhaltige Ziele und Inhalte werden mit den Mitteln des Event-Marketings erst vereinzelt vermittelt. Aus diesen ersten Aktivitäten kann aber ein neuer Kommunikationsmarkt entstehen, wenn seitens der Nachhaltigkeitsakteure eine Verständigung über Kriterien und Anforderungen an dieses Marketinginstrument erfolgt sowie der Symbolebene in der Nachhaltigkeitskommunikation eine stärkere Beachtung geschenkt wird. Informationsbündelung und symbolisches Management sind wichtige Ansatzpunkte, um in der Marketingpraxis von Unternehmen, öffentlichen Einrichtungen, Verbänden, NGOs und von Kommunikations- und Eventagenturen eine nachhaltige Eventkultur zu verankern.

Description: A miniature electronic nose (ENose) has been designed and built at the Jet Propulsion Laboratory (JPL), Pasadena, CA, and was designed to detect, identify, and quantify ten common contaminants and relative humidity changes. The sensing array includes 32 sensing films made from polymer carbon-black composites. Event identification and quantification were done using the Levenberg-Marquart nonlinear least squares method. After successful ground training, this ENose was used in a demonstration experiment aboard STS-95 (October-November, 1998), in which the ENose was operated continuously for six days and recorded the sensors' response to the air in the mid-deck. Air samples were collected daily and analyzed independently after the flight. Changes in shuttle-cabin humidity were detected and quantified by the JPL ENose; neither the ENose nor the air samples detected any of the contaminants on the target list. The device is microgravity insensitive.

Description: An electronic nose that uses an array of 32 polymer-carbon black composite sensors has been developed, trained, and tested. By selecting a variety of chemical functionalities in the polymers used to make sensors, it is possible to construct an array capable of identifying and quantifying a broad range of target compounds, such as alcohols and aromatics, and distinguishing isomers and enantiomers (mirror-image isomers). A model of the interaction between target molecules and the polymer-carbon black composite sensors is under development to aid in selecting the array members and to enable identification of compounds with responses not stored in the analysis library.

Description: Closed and semi-closed plant growth chambers have long been used in studies of plant and crop physiology. These studies include the measurement of photosynthesis and transpiration via photosynthetic gas exchange. Unfortunately, other gaseous products of plant metabolism can accumulate in these chambers and cause artifacts in the measurements. The most important of these gaseous byproducts is the plant hormone ethylene (C2H4). In spite of hundreds of manuscripts on ethylene, we still have a limited understanding of the synthesis rates throughout the plant life cycle. We also have a poor understanding of the sensitivity of intact, rapidly growing plants to ethylene. We know ethylene synthesis and sensitivity are influenced by both biotic and abiotic stresses, but such whole plant responses have not been accurately quantified. Here we present an overview of basic studies on ethylene synthesis and sensitivity.

Description: The different advances in the Micro Ecological Life Support System Alternative project (MELISSA), fostered and coordinated by the European Space Agency, as well as in other associated technologies, are integrated and demonstrated in the MELISSA Pilot Plant laboratory. During the first period of operation, the definition of the different compartments at an individual basis has been achieved, and the complete facility is being re-designed to face a new period of integration of all these compartments. The final objective is to demonstrate the potentiality of biological systems such as MELISSA as life support systems. The facility will also serve as a test bed to study the robustness and stability of the continuous operation of a complex biological system. This includes testing of the associated instrumentation and control for a safe operation, characterization of the chemical and microbial safety of the system, as well as tracking the genetic stability of the microbial strains used. The new period is envisaged as a contribution to the further development of more complete biological life support systems for long-term manned missions, that should be better defined from the knowledge to be gained from this integration phase. This contribution summarizes the current status of the Pilot Plant and the planned steps for the new period. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

Description: The cost of keeping people alive in space is assessed from a theoretical viewpoint and using two actual designs for plant growth systems. While life support is theoretically not very demanding, our ability to implement life support is well below theoretical limits. A theoretical limit has been calculated from requirements and the state of the art for plant growth has been calculated using data from the BIO-Plex PDR and from the Cornell CEA prototype system. The very low efficiency of our current approaches results in a high mission impact, though we can still see how to get a significant reduction in cost of food when compared to supplying it from Earth. Seeing the distribution of costs should allow us to improve our current designs. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

Description: System-level analyses for Advanced Life Support require mathematical models for various processes, such as for biomass production and waste management, which would ideally be integrated into overall system models. Explanatory models (also referred to as mechanistic or process models) would provide the basis for a more robust system model, as these would be based on an understanding of specific processes. However, implementing such models at the system level may not always be practicable because of their complexity. For the area of biomass production, explanatory models were used to generate parameters and multivariable polynomial equations for basic models that are suitable for estimating the direction and magnitude of daily changes in canopy gas-exchange, harvest index, and production scheduling for both nominal and off-nominal growing conditions. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

Description: Life support system designs for long-duration space missions have a multitude of requirements drivers, such as mission objectives, political considerations, cost, crew wellness, inherent mission attributes, as well as many other influences. Evaluation of requirements satisfaction can be difficult, particularly at an early stage of mission design. Because launch cost is a critical factor and relatively easy to quantify, it is a point of focus in early mission design. The method used to determine launch cost influences the accuracy of the estimate. This paper discusses the appropriateness of dynamic mission simulation in estimating the launch cost of a life support system. This paper also provides an abbreviated example of a dynamic simulation life support model and possible ways in which such a model might be utilized for design improvement. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

Description: A major challenge of designing a bioregenerative life support system for Mars is the reduction of the mass, volume, power, thermal and crew-time requirements. Structural mass of the greenhouse could be saved by operating the greenhouse at low atmospheric pressure. This paper investigates the feasibility of this concept. The method of equivalent system mass is used to compare greenhouses operated at high atmospheric pressure to greenhouses operated at low pressure for three different lighting methods: natural, artificial and hybrid lighting. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

Description: In designing innovative space plant growth facilities (SPGF) for long duration space flight, various limitations must be addressed including onboard resources: volume, energy consumption, heat transfer and crew labor expenditure. The required accuracy in evaluating on board resources by using the equivalent mass methodology and applying it to the design of such facilities is not precise. This is due to the uncertainty of the structure and not completely understanding the properties of all associated hardware, including the technology in these systems. We present a simple criteria of optimization for horticultural regimes in SPGF: Qmax = max [M x (EBI)2/(V x E x T], where M is the crop harvest in terms of total dry biomass in the plant growth system; EBI is the edible biomass index (harvest index), V is volume occupied by the crop; E is the crop light energy supply during growth; T is the crop growth duration. The criterion reflects directly on the consumption of onboard resources for crop production. c2004 COSPAR. Published by Elsevier Ltd. All rights reserved.

Description: Extension of human habitation into space requires that humans carry with them many of the microorganisms with which they coexist on Earth. The ubiquity of microorganisms in close association with all living things and biogeochemical processes on Earth predicates that they must also play a critical role in maintaining the viability of human life in space. Even though bacterial populations exist as locally adapted ecotypes, the abundance of individuals in microbial species is so large that dispersal is unlikely to be limited by geographical barriers on Earth (i.e., for most environments "everything is everywhere" given enough time). This will not be true for microbial communities in space where local species richness will be relatively low because of sterilization protocols prior to launch and physical barriers between Earth and spacecraft after launch. Although community diversity will be sufficient to sustain ecosystem function at the onset, richness and evenness may decline over time such that biological systems either lose functional potential (e.g., bioreactors may fail to reduce BOD or nitrogen load) or become susceptible to invasion by human-associated microorganisms (pathogens) over time. Research at the John F. Kennedy Space Center has evaluated fundamental properties of microbial diversity and community assembly in prototype bioregenerative systems for NASA Advanced Life Support. Successional trends related to increased niche specialization, including an apparent increase in the proportion of nonculturable types of organisms, have been consistently observed. In addition, the stability of the microbial communities, as defined by their resistance to invasion by human-associated microorganisms, has been correlated to their diversity. Overall, these results reflect the significant challenges ahead for the assembly of stable, functional communities using gnotobiotic approaches, and the need to better define the basic biological principles that define ecosystem processes in the space environment. Copyright 2004 Springer-Verlag.

Description: Experimental and mathematical models were developed for describing and testing temperature and humidity parameters for plant production in bioregenerative life support systems. A factor was included for analyzing systems operating at low (10-101.3 kPa) pressure to reduce gas leakage and structural mass (e.g., inflatable greenhouses for space application). The expected close relationship between temperature and relative humidity was observed, along with the importance of heat exchanger coil temperature and air circulation rate. The presence of plants in closed habitats results in increased water flux through the system. Changes in pressure affect gas diffusion rates and surface boundary layers, and change convective transfer capabilities and water evaporation rates. A consistent observation from studies with plants at reduced pressures is increased evapotranspiration rates, even at constant vapor pressure deficits. This suggests that plant water status is a critical factor for managing low-pressure production systems. The approach suggested should help space mission planners design artificial environments in closed habitats.

Description: This custom bibliography from the NASA Scientific and Technical Information Program lists a sampling of records found in the NASA Aeronautics and Space Database. The scope of this topic includes technologies for the space suit of the future, specifically for productive work on planetary surfaces. This area of focus is one of the enabling technologies as defined by NASA s Report of the President s Commission on Implementation of United States Space Exploration Policy, published in June 2004.

Description: Systems Engineering and Risk Management processes can work synergistically to defend against the causes of many mission ending failures. Defending against mission ending failures is facilitated by fostering a team that has a healthy respect for Murphy's Law and a team with a of curiosity for how things work, how they can fail, and what they need to know. This curiosity is channeled into making the unknowns known or what is uncertain more certain. Efforts to assure mission success require the expenditure of energy in the following areas: 1. Understanding what defines Mission Success as guided by the customer's needs, objectives and constraints. 2. Understanding how the system is supposed to work and how the system is to be produced, fueled by the curiosity of how the system should work and how it should be produced. 3. Understanding how the system can fail and how the system might not be produced on time and within cost, fueled by the curiosity of how the system might fail and how production might be difficult. 4. Understanding what we need to know and what we need learn for proper completion of the above three items, fueled by the curiosity of what we might not know in order to make the best decisions.

Description: This project is a collaborative effort between NASA Glenn Research Center's Revolutionary Aeropropulsion Concepts (RAC) Project, part of the NASA Aerospace Propulsion and Power Program of the Aerospace Technology Enterprise, and Case Western Reserve University's Cleveland Functional Electrical Stimulation (FES) Center. The RAC Project foresees implantable power requirements for future applications such as organically based sensor platforms and robotics that can interface with the human senses. One of the goals of the FES Center is to develop a totally implantable neural prosthesis. This goal is based on feedback from patients who would prefer a system with an internal power source over the currently used system with an external power source. The conversion system under investigation would transform the energy produced from a stimulated muscle contraction into electrical energy. We hypothesize that the output power of the system will be greater than the input power necessary to initiate, sustain, and control the electrical conversion system because of the stored potential energy of the muscle. If the system can be made biocompatible, durable, and with the potential for sustained use, then the biological power source will be a viable solution.

Description: This custom bibliography from the NASA Scientific and Technical Information Program lists a sampling of records found in the NASA Aeronautics and Space Database. The scope of this topic includes technologies for the recycling of oxygen, carbon dioxide, and water for long-duration human presence in space. This area of focus is one of the enabling technologies as defined by NASA s Report of the President s Commission on Implementation of United States Space Exploration Policy, published in June 2004.

Description: In an era of increasing automation, it is important to design displays and input devices that minimize human error. In this context, information concerning the human response to the detection of incongruous information is important. Such incongruous information can be operationalized as unexpected (perhaps erroneous) information on which a decision by the human or operation by an automated system is based. In the aviation environment, decision making when faced with inadequate, incomplete, or incongruous information may occur in a failure scenario. An additional challenge facing the human operator in automated environments is maintaining alertness or vigilance. The vigilance issue is of particular concern as a factor that may interact with performance when faced with inadequate, incomplete, or incongruous information. From the literature on eye-scan behavior we know that the time spent looking at a particular display or indicator is a function of the type of information one is trying to discern from the display. For example, quick glances are all it takes for confirming that an indicator is in a normal position or range, whereas a continuous look of several seconds may be required for confirmation that a complex control input is having the desired effect. Important to consider is that while an extended look takes place, visual input from other sources may be missed. Much like an extended look, the interpretation of incongruous information may require extra time. The present experiment was designed to explore the performance consequences of a decision making task when incongruous information was presented. For this experiment a display incongruity was created on a subset of trials of a clock reading laboratory task. Display incongruity was made possible through presentation of 'impossible' times (e.g. 1:65 or 11:90). Subjects made 'same' 'different' decisions and keyboard responses to pairings of Analog-Analog (AA), Digital-Digital (DD), and Analog- Digital (AD), display combinations. For trials during which display incongruities were not presented, based on prior research comparing digital and analog clock displays, it would be expected that the Digital-Digital condition would result in the shortest response times and the Analog-Analog and Analog-Digital conditions would have longer response times. The performance consequence expected on trials with incongruous times would be very long response times.

Description: Viewgraphs on Advanced Life Support (ALS) Systems are presented. The topics include: 1) Fundamental Need for Advanced Life Support; 2) ALS organization; 3) Requirements and Rationale; 4) Past Integrated tests; 5) The need for improvements in life support systems; 6) ALS approach to meet exploration goals; 7) ALS Projects showing promise to meet exploration goals; and 9) GRC involvement in ALS.

Description: Design for microgravity has traditionally not been well integrated early on into the development of advanced life support (ALS) technologies. NASA currently has a many ALS technologies that are currently being developed to high technology readiness levels but have not been formally evaluated for microgravity compatibility. Two examples of such technologies are the Vapor Phase Catalytic Ammonia Removal Technology and the Direct Osmotic Concentration Technology. This presentation will cover the design of theses two systems and will identify potential microgravity issues.

Description: This paper will review the historical record of NASA's regenerative life support systems flight hardware with emphasis on the complexity of spiral development of technology as related to the International Space Station program. A brief summary of what constitutes ECLSS designs for human habitation will be included and will provide illustrations of the complex system/system integration issues. The new technology areas which need to be addressed in our future Code T initiatives will be highlighted. The development status of the current regenerative ECLSS for Space Station will be provided for the Oxygen Generation System and the Water Recovery System. In addition, the NASA is planning to augment the existing ISS capability with a new technology development effort by Code U/Code T for CO2 reduction (Sabatier Reactor). This latest ISS spiral development activity will be highlighted in this paper.

Description: Common issues for space system designers include:Ability to Verify Performance in Normal Gravity prior to Deployment; System Stability; Phase Accumulation & Shedding; Phase Separation; Flow Distribution through Tees & Manifolds Boiling Crisis; Heat Transfer Coefficient; and Pressure Drop.The report concludes:Guidance similar to "A design that operates in a single phase is less complex than a design that has two-phase flow" is not always true considering the amount of effort spent on pressurizing, subcooling and phase separators to ensure single phase operation. While there is still much to learn about two-phase flow in reduced gravity, we have a good start. Focus now needs to be directed more towards system level problems .

Description: The National Aeronautics and Space Administration (NASA) is working towards future long duration manned space flights beyond low earth orbit. The duration of these missions may be as long as 2.5 years and will likely include a stay on a lunar or planetary surface. The primary goal of the Advanced Food System in these long duration exploratory missions is to provide the crew with a palatable, nutritious, and safe food system while minimizing volume, mass, and waste. Vegetable crops can provide the crew with added nutrition and variety. These crops do not require any cooking or food processing prior to consumption. The vegetable crops, unlike prepackaged foods, will provide bright colors, textures (crispy), and fresh aromas. Ten vegetable crops have been identified for possible use in long duration missions. They are lettuce, spinach, carrot, tomato, green onion, radish, bell pepper, strawberries, fresh herbs, and cabbage. Whether these crops are grown on a transit vehicle (e.g., International Space Station) or on the lunar or planetary surface, it will be necessary to determine how to safely handle the vegetables while maintaining acceptability. Since hydrogen peroxide degrades into water and oxygen and is generally recognized as safe (GRAS), hydrogen peroxide has been recommended as the sanitizer. The objective of th is research is to determine the required effective concentration of hydrogen peroxide. In addition, it will be determined whether the use of hydrogen peroxide, although a viable sanitizer, adversely affects the quality of the vegetables. Vegetables will be dipped in 1 % hydrogen peroxide, 3% hydrogen peroxide, or 5% hydrogen peroxide. Treated produce and controls will be stored in plastic bags at 5 C for up to 14 days. Sensory, color, texture, and total plate count will be measured. The effect on several vegetables including lettuce, radish, tomato and strawberries has been completed. Although each vegetable reacts to hydrogen peroxide differently, the data suggest that 5% hydrogen peroxide reduces the shelf life of the vegetable. A dip of either 1 % or 3% hydrogen peroxide helps reduce the microbial total count while not adversely affecting the quality of the vegetable.

Description: At the United Nations Millennium Summit in September of 2000, the world leaders agreed on an ambitious agenda for reducing poverty and improving lives: the Millennium Development Goals (MDGs), a list of issues they consider highly pernicious, threatening to human welfare and, thereby, to global security and prosperity. Among the eight goals are included fundamental human needs such as the eradication of extreme poverty and hunger, the promotion of gender equality, the reduction of child mortality and improvement of maternal health, and ensuring the sustainability of our shared environment. In order to help focus the efforts to meet these goals, the United Nations (UN) has established a set of eighteen concrete targets, each with an associated schedule. Among these is Target 10: "By 2015, reduce by half the proportion of people without access to safe drinking water." A closely related target of equal dignity was agreed at the World Summit on Sustainable Development (Johannesburg, September 2002): "By 2015, reduce by half the proportion of people without access to basic sanitation." One of the greatest successes in the development of Exploration-class technologies for closed-loop, sustainable support of long-duration human space missions has been the work both ESA and NASA have done in bioregenerative water reclamation (WRS), and secondarily, in solid-waste management. Solid-waste and WRS systems tend to be combined in the commercial world into the field of sanitation, although as we will see, the most essential principles of sustainable terrestrial sanitation actually insist upon the separation of solid and liquid excreta. Seeing the potential synergy between the space program ALS technologies developed for Mars and the urgent needs of hundreds of millions of people for secure access to clean water here on Earth, we set out to organize the adaptation of these technologies to help the United Nations Development Programme (UNDP) meet Target 10. In this paper, we will summarize the issues and results of the first "Water for Two Worlds" summit held in January of this year, describe,the status of the sustainable sanitation systems that are on the table for adaptation to widespread terrestrial use, and present fundamental strategies for forward work.

Description: The quality factor used in radiation protection is defined as a function of LET, Q(sub ave)(LET). However, tissue equivalent proportional counters (TEPC) measure the average quality factors as a function of lineal energy (y), Q(sub ave)(Y). A model of the TEPC response for charged particles considers energy deposition as a function of impact parameter from the ion s path to the volume, and describes the escape of energy out of sensitive volume by delta-rays and the entry of delta rays from the high-density wall into the low-density gas-volume. A common goal for operational detectors is to measure the average radiation quality to within accuracy of 25%. Using our TEPC response model and the NASA space radiation transport model we show that this accuracy is obtained by a properly calibrated TEPC. However, when the individual contributions from trapped protons and galactic cosmic rays (GCR) are considered; the average quality factor obtained by TEPC is overestimated for trapped protons and underestimated for GCR by about 30%, i.e., a compensating error. Using TEPC's values for trapped protons for Q(sub ave)(y), we obtained average quality factors in the 2.07-2.32 range. However, Q(sub ave)(LET) ranges from 1.5-1.65 as spacecraft shielding depth increases. The average quality factors for trapped protons on STS-89 demonstrate that the model of the TEPC response is in good agreement with flight TEPC data for Q(sub ave)(y), and thus Q(sub ave)(LET) for trapped protons is overestimated by TEPC. Preliminary comparisons for the complete GCR spectra show that Q(sub ave)(LET) for GCR is approximately 3.2-4.1, while TEPC measures 2.9-3.4 for QQ(sub ave)(y), indicating that QQ(sub ave)(LET) for GCR is underestimated by TEPC.

Description: The Advanced Life Support (ALS) Metric is the predominant tool for predicting the cost of ALS systems. Metric goals for the ALS Program are daunting, requiring a threefold increase in the ALS Metric by 2010. Confounding the problem, the rate new ALS technologies reach the maturity required for consideration in the ALS Metric and the rate at which new configurations are developed is slow, limiting the search space and potentially giving the perspective of a ALS technology, the ALS Metric may remain elusive. This paper is a sequel to a paper published in the proceedings of the 2003 ICES conference entitled, "Managing to the metric: an approach to optimizing life support costs." The conclusions of that paper state that the largest contributors to the ALS Metric should be targeted by ALS researchers and management for maximum metric reductions. Certainly, these areas potentially offer large potential benefits to future ALS missions; however, the ALS Metric is not the only decision-making tool available to the community. To facilitate decision-making within the ALS community a combination of metrics should be utilized, such as the Equivalent System Mass (ESM)-based ALS metric, but also those available through techniques such as life cycle costing and faithful consideration of the sensitivity of the assumed models and data. Often a lack of data is cited as the reason why these techniques are not considered for utilization. An existing database development effort within the ALS community, known as OPIS, may provide the opportunity to collect the necessary information to enable the proposed systems analyses. A review of these additional analysis techniques is provided, focusing on the data necessary to enable these. The discussion is concluded by proposing how the data may be utilized by analysts in the future.

Description: This slide presentation presents an overview of work system requirements, extravehicular activity system evolution, key issues, future needs, and a summary. Key issues include pressure suits, life support systems, system integration, biomedical requirements, and work and mobility aids.

Description: The National Aeronautics and Space Administration (NASA) seeks to license its Advanced Tire and Strut Pressure Monitor (TSPM) technology. The TSPM is a handheld system to accurately measure tire and strut pressure and temperature over a wide temperature range (20 to 120 OF), as well as improve personnel safety. Sensor accuracy, electronics design, and a simple user interface allow operators quick, easy access to required measurements. The handheld electronics, powered by 12-VAC or by 9-VDC batteries, provide the user with an easy-to-read visual display of pressure/temperature or the streaming of pressure/temperature data via an RS-232 interface. When connected to a laptop computer, this new measurement system can provide users with automated data recording and trending, eliminating the chance for data hand-recording errors. In addition, calibration software allows for calibration data to be automatically utilized for the generation of new data conversion equations, simplifying the calibration processes that are so critical to reliable measurements. The design places a high-accuracy pressure sensor (also used as a temperature sensor) as close to the tire or strut measurement location as possible, allowing the user to make accurate measurements rapidly, minimizing the amount of high-pressure volumes, and allowing reasonable distance between the tire or strut and the operator. The pressure sensor attaches directly to the pressure supply/relief valve on the tire and/or strut, with necessary electronics contained in the handheld enclosure. A software algorithm ensures high accuracy of the device over the wide temperature range. Using the pressure sensor as a temperature sensor permits measurement of the actual temperature of the pressurized gas. This device can be adapted to create a portable calibration standard that does not require thermal conditioning. This allows accurate pressure measurements without disturbing the gas temperature. In-place calibration can save considerable time and money and is suitable in many process applications throughout industry.

Description: Space weather can be defined as the total ensemble of radiation in space, as well as on the surface of moons and asteroids. It consists of electromagnetic, charged-particle, and neutral particle radiation. The fundamental goal behind this NIAC Phase I research is to investigate methods of generating a static electric-field potential phi(x, y, z) in the volume above and around a "safe" or protected area on the lunar surface so that trajectories of harmful charged particle radiation are modified (deflected or reflected), thus creating a shadow over that region. Since the charged particles are not neutralized but merely redirected, there will be areas outside of the shadowed protected region that will have a higher flux concentration of radiation. One of the fundamental limitations of the static electric (electrostatic)-field approach to radiation shielding is that complete shadowing is accomplished only by complete reflection, which can only occur for shield voltages greater than or equal to the kinetic energy (in electron volts) of the incoming charged particles. Just as habitats on Earth are protected from severe weather events and conditions, such as extreme temperatures, high winds, and UV radiation, using multiple methods of shielding protection from severe space weather will undoubtedly require multiple strategies. The electrostatic shield concept may be one of many methods employed to protect astronaut habitats on the lunar surface from some of the harmful effects of space weather.

Description: The figure depicts an apparatus for mechanical testing of nuts. In the original application for which the apparatus was developed, the nuts are of a frangible type designed for use with pyrotechnic devices in spacecraft applications in which there are requirements for rapid, one-time separations of structures that are bolted together. The apparatus can also be used to test nonfrangible nuts engaged without pyrotechnic devices. This apparatus was developed to replace prior testing systems that were extremely heavy and immobile and characterized by long setup times (of the order of an hour for each nut to be tested). This apparatus is mobile, and the setup for each test can now be completed in about five minutes. The apparatus can load a nut under test with a static axial force of as much as 6.8 x 10(exp 5) lb (3.0 MN) and a static moment of as much as 8.5 x 10(exp 4) lb in. (9.6 x 10(exp 3) N(raised dot)m) for a predetermined amount of time. In the case of a test of a frangible nut, the pyrotechnic devices can be exploded to break the nut while the load is applied, in which case the breakage of the nut relieves the load. The apparatus can be operated remotely for safety during an explosive test. The load-generating portion of the apparatus is driven by low-pressure compressed air; the remainder of the apparatus is driven by 110-Vac electricity. From its source, the compressed air is fed to the apparatus through a regulator and a manually operated valve. The regulated compressed air is fed to a pneumatically driven hydraulic pump, which pressurizes oil in a hydraulic cylinder, thereby causing a load to be applied via a hydraulic nut (not to be confused with the nut under test). During operation, the hydraulic pressure is correlated with the applied axial load, which is verified by use of a load cell. Prior to operation, one end of a test stud (which could be an ordinary threaded rod or bolt) is installed in the hydraulic nut. The other end of the test stud passes through a bearing plate; a load cell is slid onto that end, and then the nut to be tested is threaded onto that end and tightened until the nut and load cell press gently against the bearing plate.

Description: A proposed technique for locating concealed objects (especially small antipersonnel land mines) involves the acquisition and processing of spectral signatures over broad microwave frequency bands. This technique was conceived to overcome the weaknesses of older narrow- band electromagnetic techniques like ground-probing radar and low-frequency electromagnetic induction. Ground-probing radar is susceptible to false detections and/or interference caused by rocks, roots, air pockets, soil inhomogeneities, ice, liquid water, and miscellaneous buried objects other than those sought. Moreover, if the radar frequency happens to be one for which the permittivity of a sought object matches the permittivity of the surrounding soil or there is an unfavorable complex-amplitude addition of the radar reflection at the receiver, then the object is not detected. Low-frequency electromagnetic induction works well for detecting metallic objects, but the amounts of metal in plastic mines are often too small to be detectable. The potential advantage of the proposed technique arises from the fact that wideband spectral signatures generally contain more relevant information than do narrow-band signals. Consequently, spectral signatures could be used to make better decisions regarding whether concealed objects are present and whether they are the ones sought. In some cases, spectral signatures could provide information on the depths, sizes, shapes, and compositions of objects. An apparatus to implement the proposed technique (see Figure 1) could be assembled from equipment already in common use. Typically, such an apparatus would include a radio-frequency (RF) transmitter/receiver, a broad-band microwave antenna, and a fast personal computer loaded with appropriate software. In operation, the counter would be turned on, the antenna would be aimed at the ground or other mass suspected to contain a mine or other sought object, and the operating frequency would be swept over the band of interest.

Description: Simple, passive instruments have been developed for measuring the exposure of material specimens to vacuum ultraviolet (VUV) radiation from the Sun. Each instrument contains a silicon photodiode and a coulometer. The photocharge generated in the photodiode is stored in the coulometer. The accumulated electric charge measured by use of the coulometer is assumed to be proportional to the cumulative dose of VUV radiation expressed in such convenient units as equivalent Sun hours (ESH) [defined as the number of hours of exposure to sunlight at normal incidence]. Intended originally for use aboard spacecraft, these instruments could also be adapted to such terrestrial uses as monitoring the curing of ultraviolet-curable epoxies. Each instrument includes a photodiode and a coulometer assembly mounted on an interface plate (see figure). The photodiode assembly includes an aluminum housing that holds the photodiode, a poly(tetrafluoroehylene) cosine receptor, and a narrow-band optical filter. The cosine receptor ensures that the angular response of the instrument approximates the ideal angular response (proportional to the cosine of the angle of incidence). The filter is chosen to pass the ultraviolet wavelength of interest in a specific experiment. The photodiode is electrically connected to the coulometer. The factor of proportionality between the charge stored in the coulometer and ultraviolet dosage (in units of ESH) is established, prior to use, in calibration experiments that involve the use of lamps and current sources traceable to the National Institute of Standards and Technology.