ALBERT

Notes: Andalusite porphyroblasts are totally pseudomorphosed by margarite–paragonite aggregates in aluminous pelites containing the peak mineral assemblage andalusite, chlorite, chloritoid, margarite, paragonite, quartz ± garnet, in a NW Iberia contact area. Equilibria at low P–T are investigated using new KFMASH and (mainly) MnCNKFMASH grids constructed with Thermocalc 3.21. P–T and T–X pseudosections with phase modal volume isopleths are constructed for compositions relatively richer and poorer in andalusite to model the assemblages in an andalusite-bearing rock that contains a thin andalusite-rich band (ARB) during retrogression. Their compositions, prior to retrogression, are used in the modelling, and have been retrieved by restoring the pseudomorph-forming elements into the current-depleted matrix, except for Al2O3 which is assumed to be immobile. Compositional differences between the thin band and the rest of the rock have not resulted in differences in andalusite porphyroblast retrogression. The absence of chloritoid resorbtion implies either a pressure increase at constant reacting-system composition, or that its composition changed during retrogression at constant pressure, by becoming enriched in the progressively replaced andalusite porphyroblasts. T–X pseudosections at 1 kbar model this latter process using as end-members in X, first, the restored original rock and ARB compositions, and, then the same process, taking into account the change in composition of both as retrogression proceeded. The MnNCKFMASH pseudosections of rocks with different Al contents facilitate making further deductions on the rock-composition control of the resulting assemblages upon retrogression. Andalusite eventually disappears in relatively Al-poor rocks, resulting, as in this study, in a rock formed by chloritoid–chlorite as the only FM minerals, plus margarite–paragonite pseudomorphs of andalusite. In rocks richer in Al, chlorite would progressively disappear and a kyanite/andalusite–chloritoid assemblage would eventually be stable at retrograde conditions. The Al-silicate, stable during retrogression in Al-rich rocks, indicates pressure conditions and hence the tectonic context under which retrogression took place.

Notes: In statistically optimised P–T estimation, the contributions to overall uncertainty from different sources are represented by ellipses. One source, for a diffusion-controlled reaction at non-equilibrium, is diffusion modelling of the reaction texture. This modelling is used to estimate ratios, Q, between free-energy differences, ΔG, of reactions among mineral end-members, to replace the equilibrium condition ΔG = 0. The associated uncertainty is compared with those already inherent in the equilibrium case (from end-member data, activity models and mineral compositions). A compact matrix formulation is introduced for activity coefficients, and their partial derivatives governing error propagation. The non-equilibrium example studied is a corona reaction with the assemblage Grt–Opx–Cpx–Pl–Qtz. Two garnet compositions are used, from opposite sides of the corona. In one of them, affected by post-reaction Fe, Mg exchange with pyroxene, the problem of reconstructing the original composition is overcome by direct use of ratios between chemical-potential differences, given by the diffusion modelling. The number of geothermobarometers in the optimisation is limited by near-degeneracies. Their weightings are affected by strong correlations among Q ratios. Uncertainty from diffusion modelling is not large in comparison with other sources. Overall precision is limited mainly by uncertainties in activity models. Hypothetical equilibrium P–T are also estimated for both garnet compositions. By this approach, departure from equilibrium can be measured, with statistical uncertainties. For the example, the result for difference from equilibrium pressure is 1.2 ± 0.7 kbar.

Notes: This paper characterizes the metamorphic thermal structure of the Higo Metamorphic Complex (HMC) and presents the results of a numerical simulation of a geotherm with melt migration and solidification. Reconstruction of the geological and metamorphic structure shows that the HMC initially had a simple thermal structure where metamorphic temperatures and pressures increased towards apparent lower structural levels. Subsequently, this initial thermal structure has been collapsed by E–W and NNE–SSW trending high-angle faults. Pressure and temperature conditions using the analysis of mineral assemblages and thermobarometry define a metamorphic field P–T array that may be divided into two segments: the array at apparent higher structural levels has a low-dP/dT slope, whereas that at apparent lower structural levels has a high-dP/dT slope. This composite array cannot be explained by heat conduction in subsolidus rocks alone. Migmatite is exposed pervasively at apparent lower structural levels, but large syn-metamorphic plutons are absent at the levels exposed in the HMC. Transport and solidification of melt within migmatite is a potential mechanism to generate the composite array. Thermal modelling of a geotherm with melt migration and solidification shows that the composite thermal structure may be formed by a change of the dominant heat transfer from an advective regime to a conduction regime with decreasing depth. The model also predicts that strata beneath the crossing point will consist of high-grade solid metamorphic rocks and solidified melt products, such as migmatite. This prediction is consistent with the observation that migmatite was associated with the very high-dP/dT slope. The melt migration model is able to generate the very high-dP/dT segment due to the high rate of heat transfer by advection.

Notes: Sapphirine, coexisting with quartz, is an indicator mineral for ultrahigh-temperature metamorphism in aluminous rock compositions. Here a new activity-composition model for sapphirine is combined with the internally consistent thermodynamic dataset used by THERMOCALC, for calculations primarily in K2O-FeO-MgO-Al2O3-SiO2-H2O (KFMASH). A discrepancy between published experimentally derived FMAS grids and our calculations is understood with reference to H2O. Published FMAS grids effectively represent constant aH2O sections, thereby limiting their detailed use for the interpretation of mineral reaction textures in compositions with differing H2O.For the calculated KFMASH univariant reaction grid, sapphirine + quartz assemblages occur at P–T in excess of 6–7 kbar and 1005 °C. Sapphirine compositions and composition ranges are consistent with natural examples. However, as many univariant equilibria are typically not ‘seen’ by a specific bulk composition, the univariant reaction grid may reveal little about the detailed topology of multi-variant equilibria, and therefore is of limited use for interpreting the P–T evolution of mineral assemblages and reaction sequences. Calculated pseudosections, which quantify bulk composition and multi-variant equilibria, predict experimentally determined KFMASH mineral assemblages with consistent topology, and also indicate that sapphirine stabilizes at increasingly higher pressure and temperature as XMg increases. Although coexisting sapphirine and quartz can occur in relatively iron-rich rocks if the bulk chemistry is sufficiently aluminous, the P–T window of stability shrinks with decreasing XMg. An array of mineral assemblages and mineral reaction sequences from natural sapphirine + quartz and other rocks from Enderby Land, Antarctica, are reproducible with calculated pseudosections. That consistent phase diagram calculations involving sapphirine can be performed allows for a more thorough assessment of the metamorphic evolution of high-temperature granulite facies terranes than was previously possible. The establishment of a a-x model for sapphirine provides the basis for expansion to larger, more geologically realistic chemical systems (e.g. involving Fe3+).

Notes: Large garnet poikiloblasts hosted by leucosome in metapelitic gneiss from Broken Hill reflect complex mineral–melt relationships. The spatial relationship between the leucosomes and the garnet poikiloblasts implies that the growth of garnet was strongly linked to the production of melt. The apparent difficulty of garnet to nucleate a large number of grains during the prograde breakdown of coexisting biotite and sillimanite led to the spatial focussing of melting reactions around the few garnet nuclei that formed. Continued reaction of biotite and sillimanite required diffusion of elements from where minerals were reacting to sites of garnet growth. This diffusion was driven by chemical potential gradients between garnet-bearing and garnet-absent parts of the rock. As a consequence, melt and peritectic K-feldspar also preferentially formed around the garnet. The diffusion of elements led to the chemical partitioning of the rock within an overall context in which equilibrium may have been approached. Thus, the garnet-bearing leucosomes record in situ melt formation around garnet porphyroblasts rather than centimetre-scale physical melt migration and segregation. The near complete preservation of the high-grade assemblages in the mesosome and leucosome is consistent with substantial melt loss. Interconnected networks between garnet-rich leucosomes provide the most likely pathway for melt migration. Decimetre-scale, coarse-grained, garnet-poor leucosomes may represent areas of melt flux through a large-scale melt transfer network.

Notes: The paper presents a straightforward method of calculating approximate orientation parameters (six degrees of freedom) of a known targeted object relative to a single calibrated camera. These can then initialise an optimised non-linear calculation of the same parameter values. The method uses the mathematics of a scaled parallel projection and is particularly suited to narrow angle images obtained using a telescope, telephoto or zoom lens. However, the method can also be used with cameras having wider fields of view provided the target group occupies a moderately small part of the image.

Notes: This paper describes three mathematical modelling methods for high-resolution declassified CORONA KH-4B images. Since CORONA images are collected with a panoramic camera, several types of geometric distortions are involved. Two methods use the modified collinearity equations, and the third involves the terrain-dependent rational function model (RFM) which is considered to be a generic sensor model. Comparative analysis of the three mathematical modelling methods is undertaken. The results show that a ± 1·5 pixels level of horizontal and vertical accuracy can be obtained. A digital elevation model (DEM) of a test site is also created.

Notes: Digital photogrammetry and softcopy workstations have added a new dimension to aerial triangulation, and some of the previously manual procedures are now available in automated form. Also, commercial software packages for automatic aerial triangulation came on to the market in the last decade. In this study, the results of automatic aerial triangulation using four triangulation software packages, Z/I Imaging's MATCH-AT (ISMAT) and ISAT, LH Systems’ MST and VirtuoZo AAT, are presented. For the comparison of the results of the tie point extraction and the bundle block adjustment for triangulation, a sub-block from the Uster block in Switzerland was selected and used. Differences between these software packages are discussed with respect to their functionality and performance in detail. The achieved standard deviation of image coordinates varies between 0·2 and 0·5 pixel for the systems tested. The more signalised control points and check points to be used, the better the σ0 estimate which could be expected. The average number of extracted tie points varied from system to system with respect to the matching method and the resolution of the images used in the programs. The digital aerial triangulation of the Uster sub-block was faster than analytical triangulation and the elapsed time for triangulation of one image using different systems varies between about 0·5 and 6 min. Nevertheless, results also show that automated aerial triangulation is still prone to error in all systems. Image matching produces many blunders, which can only be handled efficiently by using a sophisticated blunder detection procedure, as is available with robust estimation. This is not the case for all the systems tested, however. There still remains a lot to be done in terms of development (improvement of matching, for example, by integrating robust estimation for error detection at an early stage, implementation of on-line triangulation, better internal quality control procedures, more transparent and simple user interfaces and more useful information for the user with better software manuals). However, it was shown that automatic aerial triangulation provides higher redundancy and reliability of results and much more economical photogrammetric practice than ever before.

Notes: The Photogrammetric Society was formed in 1952. The Council of the Society considered that the twentieth anniversary was a good point at which to record the events which led to its formation and the significant occasions and decisions which have taken place since 1952. Consequently, Paul Lamboit was invited to compile this History. He has placed the birth and development of the Society within the national and international photogrammetric context and his record of the deliberations which took place between 1947 and 1952 will be of particular interest to historians of our subject.This account was first published in a limited edition in 1971. Sufficient interest has since been expressed to prompt a wider circulation through publication in the Photogrammetric Record.The author served the Society continuously in several official capacities from 1953 to 1969 and he was elected to Honorary Membership in 1969.〈section xml:id="abs1-2"〉〈title type="main"〉RésuméLa Photogrammetric Society a été fondée en 1952. Excellente occasion pour faire le point qu'un vingtiéme anniversaire, a estimé le Conseil de la Société; pour rappeler les circonstances de sa naissance, les étapes de sa croissance et les décisions importantes prises depuis 1952. Ce qu'on invita Paul Lamboit à faire. Son exposé resitue la naissance et le développement de la Société dans le contexte national et international de la photogrammétrie; la relation qu'il fait des décisions prises entre 1947 et 1952 intéressera particulièrement ceux qui s'occupent d'histoire de la photogrammétrie.Ce rapport d'abord publié en édition limitée en 1971, a suscité un intérêt suffisant pour que l'on se presse en le publiant dans le Photogrammetric Record de le porter à la connaissance d'un plus large public.L'auteur a exercé différentes fonctions de 1953 à 1969 dans l'appareil de la Société. Il a étéélu membre honoraire en 1969.〈section xml:id="abs1-3"〉〈title type="main"〉Zusummenfussung1952 wurde die Britische Gesellschaft für Photogrammetrie gegründet. Der Rat der Gesellschaft erwog, dass der zwanzigste Jahrestag eine günstige Gelegenheit sei, um die Ereignisse, die zur Gründung der Gesellschaft führten sowie die bedeutenden Veranstaltungen, die stattfanden und die Entscheidungen, die getroffen wurden, darzustellen. Aus diesem Grunde wurde Paul Lamboit eingeladen, diesen historischen Rückblick zu schreiben. Er hat dabei die Gründung und die Entwicklung der Gesellschaft in den nationalen und internationalen photogrammetrischen Zusammenhang gestellt nd sein Bericht über die zwischen 1947 und 1972 erfolgten Beratungen wird für an unserer Sache interessierte Historiker sehr aufschlussreich sein.Diese Zusammenstellung wurde erstmals in einer begrenzten Auflage im Jahre 1971 veröffentlicht. Genügend Interesse wurde inzwischen bekundet, um eine weitergehende Verteilung mit Hilfe des Photogrammetric Record zu veranlassen.Der Autor diente der Gesellschaft kontinuierlich in verschiedenen Ämtern von 1953 bis 1969, wo er aum Ehrenmitglied gewählt wurde.

Notes: Architecture at the Maya archaeological site of Uxmal in Yucatan, Mexico has been documented since the 17th century by historians, archaeologists, illustrators, photographers, and most recently photogrammetrists. This paper reviews the work of the major contributors to recording of architecture at Uxmal with a particular focus on the 19th century stereophotography of Alice and Augustus Le Plongeon who worked to record all the standing architecture at Uxmal, and the close range stereophotogrammetric projects that recorded the Adivino Pyramid during the late 20th century.

Notes: This article presents a complete mathematical model, which translates discrepancies between two orthophotographs created from different photographs, into precise corrections of the Digital Elevation Model (DEM). These corrections are the differences from the real surface and, if applied over the existing DEM, can produce a more accurate one. The mathematical model is straightforward, and is not approximate, and therefore there is no need for iterations.Possible applications include checking of automatically created DEMs, refinement of existing DEMs using aerial photographs and update of orthophotographs based on the previous DEM and new imagery.

Notes: A scholarly account of the formative discussions, the founding and the first 20 years of the Photogrammetric Society was published in 1971 and republished in 1974. This present review concentrates on the latter years of the life of the Photogrammetric Society prior to its merger with the Remote Sensing Society in 2001.The authors joined the Photogrammetric Society in 1960 and were conspicuous in its affairs for many years. Although both occupied the Society's presidential chair, they also fulfilled several other roles in its efficient management. Atkinson's first contribution to the Photogrammetric Record was published in 1968 and Newton's in 1971.〈section xml:id="abs1-2"〉〈title type="main"〉RésuméOn a publié en 1971 un compte-rendu détaillé des 20 premières années de la “Photogrammetric Society”, à commencer par les discussions qui présidèrent è sa fondation. Ce récit fut republié en 1974. On se focalise dans cet article sur les dernières années d'activité de la “Photogrammetric Society” qui aboutirent à sa fusion avec la “Remote Sensing Society” en 2001.Les deux auteurs adhérèrent à la “Photogrammetric Society” en 1960 et y furent d‘éminents animateurs pendant de nombreuses années. Tous deux occupèrent le poste de président de cette Association mais remplirent égulement plusieurs autres fonctions qui contribuèrent à une gestion efficace. La première intervention d'Atkinson dans le Photogrummetric Record remonte à 1968, et celle de Newton à 1971.〈section xml:id="abs1-3"〉〈title type="main"〉ZusummenfussungEine wissenschaftliche Abhandlung über die Diskussionen zur Gründung, die Gründung selbst und die ersten 20 Jahre der Photogrammetrischen Gesellschaft wurde in 1971 publiziert und in 1974 wiederholt. Dieser aktulle Rückblick konzentriert sich auf die darauffolgenden Jahre der Photogrammetrischen Gesellschaft bis hin zur Vereinigung mit der Gesellschaft für Fernerkundung in Jahre 2001.Die Autoren wurden 1960 Mitglieder in der Photogrammetrischen Gesellschaft und trugen viele Jahre massgeblich zu deren Aktivitäsidenten der Gesellschaft auch verschiedene andere Aufgaben im Management wahrgenommen. Der erste Beitrag von Atkinson im Photogrammetric Record erschien 1968, der erste von Newton in 1971.

Notes: The determination of the attitude, the position and the intrinsic geometric characteristics of the camera is recognised as the fundamental photogrammetric problem. It can be summarised as the determination of camera interior and exterior orientation parameters, as well as the determination of 3D coordinates of object points. The term “exterior orientation” of an image refers to its position and orientation related to an exterior (object space) coordinate system. Several methods can be applied to determine the parameters of the orientation of one, two or more photos. The orientation can be processed in steps (as relative and absolute orientation) but simultaneous methods (such as bundle adjustments) are now available in many software packages. Several methods have also been developed for the orientation of single images. They are based in general on geometric and topological characteristics of imaged objects.This paper presents a survey of classical and modern methods for the determination of the exterior parameters in photogrammetry, some of which are available as software packages (with practical examples) on the Internet. The methods presented are classified in three principal groups. In the first. a selection of approximate methods for applications that do not require great accuracy is presented. Such methods are also used to calculate values required for iterative processes. In the second group, standard point-bused methods derived from collinearity, coplanarity or coangularity conditions are briefly reviewed, followed by line-based approaches. The third group represents orientation methods based on constraints and on concepts of projective geometry, which are becoming of increasing interest for photogrammetrists. In the last section, the paper gives a summary of existing strategies for automatic exterior orientation in aerial photogrammetry.〈section xml:id="abs1-2"〉〈title type="main"〉RésuméLa détermination de l'attitude, de la position et des caractéristiques intrinsèques de la chambre photographique constitue un problème fondamental en photogrammétrie. Il se résume à la détermination des paramètres de l'orientation de la chambre de prise de vue (paramètres des orientations externe et interne), ainsi qu'à la détermination des coordonnées 30 des points de l'objet. L'orientation externe se rapporte à la détermination de la position et de l'orientation d'une chambre par rapport à un système externe de coordonnées. Différentes méthodes peuvent être utilisées pour calculer les éléments dorientation externe d'une photo, d'un couple ou de plusieurs photos. Le calcul de l'orientation peut être réalisé par étapes (par exemple les orientations relative et absolue) mais les méthodes simultanées (la compensation par faisceaux par exemple) sont actuellement proposées dans la plupart des logiciels. Plusieurs méthodes ont aussi été développées pour l'orientation d'images isolées. Ells sont basées en général sur les caactéristiques géométriques et topologiques des objets photographiés.Dans cet article on présente un ensemble de méthodes classiques et modernes pour la détermination des paramètres de l'orientation externe, certaines d'entre elles étant téléchargeables sous la forme d'applications sur Internet. Les méthodes présentées sont classées en trois groupes principaux. Le premier groupe contient une sélection de méthodes approximatives utilisées d'habitude quand une grande précision n'est pas exigée, ou encore pour calculer des vuleurs approchées des paramètres extrinsèques requises pour les méthodes itératives rigoureuses. Dans le deuxième groupe, on rappelle brièvement les jondements des méthodes basées sur les conditions photogrammétriques fondamentales (la colinéarité, la coplanéité et la coangularité). Dans ce groupe, les méthodes basées sur l'extraction des points ou des lignes sont également abordées. Le troisième groupe traite des méthodes d'orientation basées sur les contraintes et les concepts de la géométrie projective, de plus en plus utilisées par les photogrammètres. Le dernier paragraphe se rapporte aux méthodes destinées à automatiser le calcul de l'orientation externe en photogrammétrie aérienne.〈section xml:id="abs1-3"〉〈title type="main"〉ZusummenfussungDie Bestimmung der Neigung, der Position und den geometrischen parametern der Kamera wird als das fundamentale Problem der Photogrammetrie angesehen. Es kann zusammenfassend sowohl als die Bestimmung der Parameter der inneren und äusseren Orientierung der Kamera angesehen werden, als auch als die Bestimmung von 3D Koordinaten von Objektpunkten. Der Ausdruck “äussere Orientierung” eines Bildes bezieht sich auf die Lage und Orientierung bezogen auf ein äusseres (Objektraum-) Koordinatensystem. Es können verschiedene Methoden angewandt werden, um die Parameter von einem, zwei oder mehreren Bildern zu bestimmen. Die orientierung kann in Schritten erfolgen, was als Relative und Absolute Orientierung bezeichnet wird, aber auch simultane Methoden, wie die Bündelausgleichung, sind in vielen Softwarepaketen implementiert. Es wurden auch Methoden für die Orientierung von Einzelbildern entwickelt, die geometrische und topologische Eigenschaften der abgebildeten Objekte nutzen. In diesem Beitrag wird Beitrag wird eine Studie klassischer und moderner Methoden der Photogrammetrie zur Bestimmung der Parameter der äßeren Orientierung vorgestellt, wovon einige in Softwarepaketen zur Verfügung stehen, die von praktischen Beispielen im Internet ergänzt werden. Die untersuchten Methoden werden in drei Hauptgruppen eingeteilt. In einer ersten Gruppe werden Näherungslösungen vorgestellt, die für Anwendungen mit geringen Genauigkeitsanforderungen geeignet sind. Diese Methoden werden ansonsten für die Näherngswertberechunggen für iterative Prozesse verwendet. IN der zweiten Gruppe werden zuerst die punktbasierten Standardmethoden vorgestellt, die von Bedingungen zur Kollinearität. Koplanarität und Kowinkligkeit abgeletet sind. Danach folgen linienbasierte Ansätze. Die dritte Gruppe umfasst Orientierungsmethoden, die auf Zwangsbedingungen und auf Konzepte der projektiven Geometrie aufbauen, die für Photogrammeter von zunehmendem Interesse sind, Im letzten Abschnitt wird eine Zusammenfassung existierender Strategien für eine automatische äussere orientierung in der Luftbildphotogrammetrie gegeben.

Notes: The aim of this paper is to offer regional evidence from Spain on alcohol abuse among adolescents. Specifically, we identify the determinants of the decision to abuse alcohol with respect to the five most important regions of Spain, as well as for the country as a whole. To this end, we estimate Probit specifications using data drawn from the Spanish Surveys on Drug Use in the School Population corresponding to 1994, 1996 and 1998. The results first reveal patterns that are qualitatively similar, but quantitatively different. Similarly, it would appear that economic policies aimed at reducing the access of adolescents to alcohol may have a positive effect on reducing abuse. Finally, the results suggest that encouragement be given to healthy habits among young people, as well as to the fight against education failure and the launching of information campaigns that accurately portray the current lifestyle of adolescents.

Notes: The aim of this study was to determine the knowledge and acceptability of soymilk (defined as consumption pattern/usage and taste) by adult consumers, residing in different socio-economic areas (low vs. high) in Cape Town. The study population of 214 participants were selected using convenience sampling. A questionnaire was developed in order to obtain demographic data (four items); basic general knowledge of soymilk (four items); and acceptability of the tested products (consumption patterns and taste) (eight items). There was a significant difference between the two groups (P = 0.000) regarding basic knowledge of soymilk, with significantly more in the high socio-economic area (HSEA) having a score of at least 75%. Gender (P = 0.082) and age (P = 0.122) did not have a significant impact on the consumption patterns of soymilk. There was no significant difference between the two groups with respect to current usage (P = 0.228) and frequency of use (P = 0.213) of soymilk. However, a significantly smaller group (P = 0.000) of participants in the low socio-economic area had previously tasted soymilk compared with those in the HSEA (16.7% vs. 41.5%; P = 0.000). In conclusion, socio-economic status appeared to be associated with knowledge of soymilk. No significant differences with regard to gender, age or current usage in the two groups studied were noted.

Notes: ‘Development’ and the globalization of consumption is leading to a breakdown of biological and cultural diversity, erosion of food security, an increase in violence and devastation for the global biosphere. We urgently need to shift away from economic globalization and homogenization towards localization and diversification.

Notes: The promises and pitfalls of agricultural biotechnology have long been debated. The public is often thwarted because consumers frequently perceive as risky, and therefore undesirable, those advances that they do not understand or of which they are unaware. A comparative study of the introduction of a biotechnology innovation in the United States (US) and in the European Union (EU) is a case in point. In the US, despite concerns of consumer protection and environmental groups that the use of genetically produced growth hormone in milk-producing cows will adversely impact the safety of the milk supply, scientific evidence and governmental findings appear to indicate that milk from treated cows is identical in quality, taste and nutritional value to milk from untreated cows. Experience to date in the US demonstrates some consumer resistance to milk from those cows that have received the growth hormone, which typically leads to a 10% increase in milk production. In fact, if there is no perceived differentiation between the two forms of milk, the issue offers little choice to consumers at large, and may result in economic benefit only to selected dairy farmers, as well as the producers of the genetically produced growth hormone. This situation in the US is an example of dysfunctional technology transfer, with perceived desirable benefits to a few, and perceived undesirable benefits to society-at-large. The information suggests that the US may have reacted hastily in approving the use of bovine growth hormone in milk-producing cows. The EU has taken a divergent approach by enacting moratoriums against its use. The differences identified in this study, contrasting responses to the bovine somatotrophin issue in the US and EU – driven in part by general consumer attitudes towards biotechnology – may provide insights into the issues and challenges that will be faced by both advocates and opponents of global proliferation of certain advances in biotechnology.

Notes: The purpose of this article is to describe how households in Novgorod the Great, Russia, deal with food provision in everyday life. The study focuses on changes experienced in food provision and consumption in Russian society, in order to illustrate how households respond to the transformation towards a market economy. The study reflects women's perspective on food provision. Students from Novgorod the Great visited 105 households and asked the women in the household to answer a questionnaire. Results from the study show that in order to cope with changes in society related to economic reforms, Russian households had changed both their food consumption and food production patterns. There was no big difference between urban and rural households. Nearly all of the households were self-sufficient in the provision of vegetables and potatoes. Many households had a ‘dacha’ (plot), where they produced most of what they needed. Among the changes experienced during recent years (i.e. during the end of the 1990s), a decade after perestroika was initiated, households mentioned the rise in food prices and the decrease of income. Households reported that they consumed less fruit and/or meat. Some households also mentioned that the quality of nourishment had decreased, thereby indicating lower general quality, lower nutrition value, or less healthy foodstuffs.

Notes: Localization: A Global Manifesto. Ed. by Colin Hines (2000). London. Published by Earthscan Publishing. ISBN 1-85383-612-5 (softcover). In Canada, the book is available from for Can$29.00. In the UK, the book is available at for £10.99 or earthinfo@earthscan.co.uk

Notes: . Microtubule dynamics in Paramecium caudatum were investigated with an anti-α-tubulin antibody and a microinjection technique to determine the function of microtubules on micronuclear behavior during conjugation. After meiosis, all four haploid micronuclei were connected by microtubular filaments to the paroral region and moved close to this region. This nuclear movement was micronucleus-specific, because some small macronuclear fragments transplanted from exconjugants never moved to the region. Only one of the four germ nuclei moved into the paroral cone and was covered by microtubule assembly (the so-called first assembly of microtubules, AM-I). This nucleus survived there, while the other three not in this region degenerated. The movement of germ nucleus was inhibited by the injection of the anti-α-tubulin antibody. The surviving germ nucleus divided once and produced a migratory pronucleus and a stationary pronucleus. Prior to the reciprocal exchange of the migratory nuclei, microtubules assembled around the migratory pronuclei again (the so-called second assembly of microtubules, AM-II). Then, the migratory pronucleus moved into the partner cell and fused with the stationary pronucleus. Thus, microtubules appear to be indispensable for nuclear behavior: they enable migration of postmeiotic nuclei to the paroral region and they permit the survival of the nucleus at the paroral cone.

Notes: . This work reports the characterization of an arginine kinase in the unicellular parasitic flagellate Trypanosoma brucei, the etiological agent of human sleeping sickness and Nagana in livestock. The arginine kinase activity, detected in the soluble fraction obtained from procyclic forms, had a specific activity similar to that observed in Trypanosoma cruzi, about 0.2 μmol min−1mg−1. Western blot analysis of T. brucei extracts revealed two bands of 40 and 45 kDa. The putative gene sequence of this enzyme had an open reading frame for a 356-amino acid polypeptide, one less than the equivalent enzyme of T. cruzi. The deduced amino acid sequence has an 82% identity with the arginine kinase of T. cruzi, and highest amino acid identities of both trypanosomatids sequences, about 70%, were with arginine kinases from the phylum Arthropoda. In addition, the amino acid sequence possesses the five arginine residues critical for interaction with ATP as well as two glutamic acids and one cysteine required for arginine binding. The finding in trypanosomatids of a new phosphagen biosynthetic pathway, which is not present in mammalian host tissues, suggests this enzyme as a possible target for chemotherapy.

Notes: The changes in porosity and elastic moduli of YSZ-containing nickel-based anode materials for solid oxide fuel cells were studied as a function of the fraction of reduced NiO. Anode samples were reduced in a gas mixture of 4% hydrogen and 96% argon for different periods of time at 800°C and their Young's and shear moduli were determined afterward at room temperature using resonant ultrasound spectroscopy and impulse excitation. It was found that the magnitude of Young's and shear moduli decreased significantly with increasing fraction of reduced NiO and that the magnitude of the elastic moduli of a fully reduced Ni–YSZ anode was ∼45% lower than that of unreduced NiO–YSZ. Because the elastic moduli of NiO are close to those of Ni, the observed decrease in the magnitude of the elastic moduli was found to be caused mainly by the significant increase in the porosity of the sample as a result of NiO reduction. Expressions are presented for the amount of porosity and the magnitude of the elastic moduli as a function of the fraction of reduced NiO.

Notes: Two- and three-dimensional SiCr/SiC composites have been prepared starting from Tyranno SA(tm) fiber preforms. Preform densification has been performed by a modified preceramic polymer impregnation and pyrolysis (PIP) process consisting of filling the preform large interbundle voids with SiC powder before the PIP process. This step was accomplished by low-pressure infiltration of a SiC powder dilute slurry through the preform thickness. Specimens were further processed with polymer impregnation and pyrolysis to determine the effects on structural, thermal, and mechanical properties of the obtained composites. High-temperature pyrolysis treatment, which promoted polymer derived SiC matrix crystallization, markedly increased thermal diffusivity.

Notes: Carbon is commonly added to sulfate-fined silicate-glass batches to enhance the fining process. Reactions between carbon and Na2SO4 modify the SOx emissions from Na2SO4 decomposition. Fourier-transform infrared (FTIR) spectrometry is used to analyze the emission of air pollutants from the isothermal decomposition of Na2SO4 + C undertaken using thermogravimetric analysis (TGA). The FTIR spectrometer is calibrated using standard gas mixtures containing CO, CO2, SO2, NO, and NO2. The collected spectra are quantified using the classical least-squares (CLS) approximation. The TGA-FTIR system provides SOx, and COx, concentrations versus time data from the isothermal decomposition of Na2SO4, in the presence of a carbon black. Mass spectrometry (MS) complements FTIR by being able to detect SO(g).

Notes: Different ratios of the precursor phases of SrFeO3–x (SFO) and SrMoO4 (SMO) were used to prepare Sr2FeMoO6 (SFMO) by a solid-state reaction. X-ray diffraction was used to identify the phases. A residual SMO was observed to exist in the sample with an SFO/SMO ratio of 0.9:1. The sample with a residual SMO phase had higher resistivity, lower magnetization, but higher low-field magnetoresistance (LFMR). High-resolution transmission electron microscopy was used to identify the compositions and phases. Nanometer-sized amorphous-like clusters of SMO phase were located inside the grains rather than at grain boundaries; however, some boundaries were rich in the strontium ion. The possible mechanisms for the conduction and the increase of LFMR of SFMO are discussed.

Notes: Submicro- and nano-sized liquid-phase-sintered SiC ceramics were mechanically tested by nanoindentation in the peak load range 5–400 mN. The submicro-sized sample showed a marked indentation size effect which the nano-sized samples did not exhibit. The relevance of indentation depth with respect to the microstructural scale has been outlined. In the investigated grain-size range, the hardness dependence on the grain size could be described by a load-dependent inverse Hall–Petch relation. Young's modulus was less microstructure- and load-dependent. Because of the very fine microstructure, the nano-sized SiC materials gave lower elastic values than the submicro-sized SiC ceramic.

Notes: Samples of composition Ba1−xLaxTi1−x/4O3, x= 0, 0.003, 0.03, and 0.10, were prepared by an alkoxide sol–gel route with final firing of ceramics at 1100°C, 2 h in air. All samples showed bulk insulating behavior with no evidence of semiconductivity caused by either direct donor doping or oxygen loss.

Notes: We have studied the rheological property evolution and hydration behavior of white and ordinary portland cement (type I) pastes and concentrated cement–polyelectrolyte suspensions. Cement composition had a marked effect on the elastic property evolution (G′(t)) and hydration behavior of these suspensions in the presence of poly(acrylic acid)/poly(ethylene oxide) copolymer (PAA/PEO), even though their affinity to adsorb such species was nearly identical. Both white and ordinary portland cement pastes exhibited G′0 values of ∼104 Pa and fully reversible G′(t) behavior until the onset of the acceleratory period (t= 2 h), where the pastes stiffened irreversibly. In contrast, cement–PAA/PEO suspensions exhibited G′0 values of ∼1 Pa and G′(t) behavior comprised of both reversible and irreversible features. Interestingly, ordinary portland cement–PAA/PEO suspensions experienced a gel-to-fluid transition on high shear mixing at short hydration times (〈1 h), and the particle network did not rebuild until ∼24 h of hydration. In sharp contrast, white portland cement–PAA/PEO suspensions remained weakly gelled throughout the initial stage of hydration even after high shear mixing. At longer hydration times (〉1 h), both cement–PAA/PEO suspensions exhibited G′i(t) ∼ exp(t/τc) with τc values of 5.6 and 1.3 h for ordinary and white portland cement, respectively. Our observations suggest that hydration phenomena impact interparticle forces during early stage hydration and, ultimately, lead to initial setting through the formation of solid bridges at the contact points between particles within the gelled network.

Notes: A new ceramic freeze-casting technique capable of manufacturing near room temperature with a sublimable vehicle was accomplished. Fluid-concentrated slurries of Al2O3 powder in molten camphene (C10H16) were prepared at 55°C. These slurries were quickly solidified (frozen) at room temperature to yield rigid solid green bodies, followed by frozen camphene removal by sublimation (freeze-drying) with negligible shrinkage. Sintering without any special binder burnout process yielded sintered bodies with over 98% theoretical density. The proposed advantages include (1) elimination of extremely cold temperatures, (2) elimination of troublesome binder burnout process, and (3) fast manufacturing cycle due to quick solidification.

Notes: Dense composites in the Ti-B-N system have been produced by reactive hot pressing of titanium and BN powders. The effect of the addition of a small amount of nickel (1–3 wt%) on the reaction kinetics and densification of TiN–TiB2 (40 vol%) composite has been studied. Composites of ∼99% of theoretical density have been produced at 1600°C under 40 MPa for 30 min with 1% nickel. The hardness and fracture toughness of these composites are 24.5 ± 0.97 GPa and 6.53 ± 0.27 MPa·m1/2, respectively. The microstructural studies on samples produced at lower temperatures indicate the formation of a transient liquid phase, which enhances the kinetics of the reaction and densification of the composite.

Notes: This paper presents new findings on ultrasonic spray pyrolysis of zirconium hydroxyl acetate precursor drops whose sizes were precisely measured using laser light diffraction technique. Precursor concentration plays a predominant role in determination of product particle size. At 0.01 wt% precursor concentration, conventional spray pyrolysis at 750°C using precursor drops 5–8 μm in diameter, generated by an ultrasonic nebulizer at 2.66 MHz, yielded uniform spherical yttria-stabilized zirconia (YSZ) particles 73 nm in diameter measured by scanning electron microscopy. The YSZ particle diameters were much smaller than those predicted by the one-particle-per-drop mechanism. Under similar reaction conditions, the high-throughput ultrasound-modulated two-fluid (UMTF) spray pyrolysis of larger precursor drops (28-μm peak diameter) also yielded spherical dense particles; they were significantly smaller in size than those produced by the low-throughput conventional ultrasonic spray pyrolysis of smaller drops (6.8-μm peak diameter).

Notes: Thermoelectric elements consisting of the layered polycrystalline materials of Al-doped ZnO and NaCo2O4 were prepared using the pulse electric-current sintering (PECS) method at 900°C for 3 min. Direct contact between the polycrystalline Al-doped ZnO and the NaCo2O4 was obtained in a single-step process for the stacked powders. The electrical conductivities of the polycrystalline materials prepared by PECS were higher than those of materials prepared by conventional sintering, despite their porous structure. The thermoelectric voltage of the 1-mol%-Al-doped ZnO and NaCo2O4 polycrystalline element (measuring ∼6 mm × 3 mm × 15 mm) was 83 mV at dT= 500 K, when the junction of the elements was at 800°C.

Notes: Pb(Zr,Ti)O3–Pb(Mn1/3 Nb2/3)O3 (PZT–PMnN) system has been studied for high-power piezoelectric applications. This study investigates this system to find out the composition with high-power density piezoelectric characteristics and low tem-perature coefficient of resonance frequency (TCF). It was found that the composition 0.9PZT–0.1PMnN (Zr/Ti = 0.51/0.49) modified with 6 mol% Sr exhibits a TCF of −8 ppm/°C (−20 to +80°C). Further, the dielectric and piezoelectric properties of this composition are as follows: kp= 0.53; Qm= 800; d33= 274; ε33/ε0= 1290 and tan δ=1.1%, which shows the suitability of this composition for ultrasonic devices used under fluctuating thermal environment.

Notes: Beam bending is an excellent method for measuring low permeabilities (≤10−18 m2) in homogeneous materials, because it is fast, requires no high pressure, and provides a concurrent measurement of the modulus of the material. The method was previously analyzed and substantiated for cylindrical or square beams. Recently, the analysis was extended to include isotropic and transversely isotropic rectangular beams. In this paper, the analysis is applied to measurements performed on cement paste, and it is shown that the solution for isotropic rectangular beams accounts for changes in the hydrodynamic behavior caused by changing the aspect ratio of the sample. The permeability and elastic modulus results are verified through comparison to previous measurements on cylindrical beams.

Notes: The deformation behavior of boron- and carbon-doped β-silicon carbide (B,C-SiC) with an average grain size of 260 ± 18 nm containing 1 wt% boron was investigated by compression testing at elevated temperatures. Extensive grain growth during deformation was observed. The stress–strain curves were compensated for grain growth by assuming power-law type of dependence on grain size and strain rate. The stress exponent n was ∼1.3 and the grain size exponent p was ∼2.7 at temperatures ranging from 1593° to 1758°C. The apparent activation energy of deformation Qd was ∼760 kJ/mol, which was lower than the activation energy for lattice diffusion of silicon and carbon in SiC and higher than that for grain-boundary diffusion of carbon in SiC. These results suggest that the deformation mechanism of the fine-grained B,C-SiC is grain-boundary sliding accommodated by the grain-boundary diffusion.

Notes: Chromium-containing stainless steel (SS) is a prospective material for use as an interconnect in solid oxide fuel cells (SOFCs). However, during operations at high temperatures, the growth of oxide scales causes the performance of the interconnect and SOFC as a whole to deteriorate. The coating of SS 446 with a conducting perovskite is a potential method of slowing the growth of oxide scale and, therefore, improving overall SOFC performance. In the present research, the structural characterization of a pure LaCrO3 thin film on the SS 446 substrates has been performed as a model material that can be used as a barrier coating for the metallic interconnect. The deposition of an amorphous La-Cr-O thin film on SS 446 was performed using radio-frequency (rf) magnetron sputtering. The deposited amorphous film was annealed in air to form the desired perovskite phase. The film underwent an amorphous to LaCrO4 phase transition during annealing at 500°C with further transformation to LaCrO3 orthorhombic phase during annealing at 700°C. A self-organized dendritic structure was reported as a result of the perovskite-phase formation. Although formation of various oxides, such as Fe2O3 and Fe3O4, was observed during the annealing of uncoated SS 446 in air, the coating of SS 446 surface with LaCrO3 film prevented formation of various oxide phases at the interconnect surface. The structural characterization of the films and SS 446 surfaces was accomplished using scanning electron microscopy with energy-dispersive X-ray analysis, X-ray diffractometry, micro-Raman spectroscopy, and nanoindentation.

Notes: The density, surface tension, and viscosity of the melts from the PbO-B2O3-SiO2 system have been measured at temperatures in the range 1073–1473 K. The effect of composition on these properties was also investigated. The density of the melt was found to increase linearly with increasing PbO content. Molar volume was derived from the density data, and its deviation from the additivity of partial molar volumes was calculated. These deviations in molar volume from those obtained from additivity rules have been used along with the ratio of various coordination numbers of boron (as reported by Bray) to discuss the structure of the melts. The surface tension was found to decrease with decreasing SiO2/B2O3 ratio, and to increase in the range of the PbO content between 30 and 60 mol%, showing a maximum at ∼60 mol% PbO, and then decreased with further additions. This result suggested that the surface tension would be affected primarily by the B2O3 content in the range of the PbO content between 30–60 mol%, and mainly by the PbO content in the range of the PbO content 〉60 mol%, respectively. The viscosity of the melt was found to decrease linearly with increasing PbO content. The results obtained indicate that the increase in viscosity with B2O3 was half that of SiO2 (on a molar basis), and an empirical equation has been proposed for the viscosity as a function of mole fraction.

Notes: Core/shell structures have been prepared via a mechanofusion system by employing several kinds of spherical polymers as a core material and Al2O3 powder or a mixture of Al2O3 and SiO2 powders as a shell material. The effect of the kind of core polymers on the quality of the resulting hollow alumina microspheres has been discussed on the basis of the thermal decomposition behavior of spherical polymers used as a core material. A large fraction of hollow alumina microspheres reflecting the shape and the particle size distribution of the core polymer could be fabricated after sintering at 1600°3C for 3 h, when highly cross-linked poly(methyl methacrylate) (PMMA) microspheres with a gel fraction of 99.03% were used as a core polymer, and abrupt firing at temperatures higher than 500°3C was adopted to remove the PMMA microspheres. The addition of 5 mass% SiO2 to the Al2O3 shell layer was found to be useful for maintaining the spherical shell structure during the firing process and for fabricating a large fraction of hollow alumina microspheres after the sintering.

Notes: Well-defined and stoichiometric spherical particles of BaTiO3 of narrow size distribution were produced at 82° and 92°3C by precipitation from chloride solutions in a strong alkaline environment. The size of the particles can be tailored in the range from ≅103 to 70–80 nm by increasing the barium concentration from ≅0.07 to 0.7 mol/L. The particles are composed of tight aggregates resulting from the assembly of several nanocrystals. The size of the nanocrystals decreases from 200–300 to 30–40 nm by increasing reactant concentration. At low barium concentration (≤0.07 mol/L at 82°3C, ≤0.06 mol/L at 92°3C), formation of BaTiO3 is strongly slowed down and nonstoichiometric, Ti-rich powders are produced. Under these conditions, the particles have the tendency to develop a dendritic-like morphology.

Notes: Crystals of δ-Y2Si2O7 (space group P121/c1) were examined using high-temperature powder X-ray diffractometry to determine their unit-cell dimensions from 296 to 1473 K. The lattice deformation induced by thermal expansion was investigated using matrix algebra analysis to determine the directions and magnitudes of the principal distortions (Λi, i= 1,2, and 3). The directions of Λ1 and Λ3 were defined by the acute angle Λ1c, which linearly decreased from 5(2)° to —5.5(3)° with increased temperature from 504 to 1473 K. The Λ2-axis invariably coincided with the crystallographic b-axis. The magnitudes of Λ1 and Λ2 steadily increased to, respectively, 1.0061(1) and 1.0068(1) during heating to 1473 K, while Λ3 remained almost constant for the entire temperature range. The mean principal distortion, Λm (= (Λ1+Λ2+Λ3)/3), steadily increased to 1.0044(1) with increased temperature to 1473 K. The coefficient of mean linear thermal expansion (α) was derived from the mean principal strain (Λm - 1) as α= (Λm - 1)/ΔT. The temperature dependence was determined to be α= 2.03 times 103+ 1.36(T - 296) (10-9 K-1). Provided that the rule-of-mixtures holds for the Y2Si2O7/Y2SiO5 composites as protective coating on SiC substrates, the volume fractions of 0.72-0.77 (70–75 mass%) would be necessary for the Y2Si2O7 component to match the α-values of both materials.

Notes: Microcellular silicon oxycarbide open cell ceramic foams were fabricated from a silicone resin. Microcellular foams, with a cell size ranging from ∼1–80 μm, were fabricated using poly(methyl methacrylate) microbeads as sacrificial templates. The compression strength of the foams decreased with increasing cell size.

Notes: Electroconductive zirconia-toughened mullite (TiN/ZTM) intragranular nanocomposite was fabricated by hot-pressing a powder mixture of nano-sized TiN, ZrO2(2Y), and mullite gel. The material showed a good sinterability and could be highly densified at a low temperature of 1300°3C. Sintering temperature strongly influenced the microstructure and electrical resistivity of the material. The electrical resistivity increased monotonously from 20 Ω-cm to 1.5 times 106°3Cm, as the sintering temperature was increased from 1300° to 1500°3C. TEM results indicated that such a phenomenon could be ascribed to the changes in the microstructure of the material, which led to a decrease in the connectivity of the TiN network in the sample as the sintering temperature was increased.

Notes: Effects of fluids on material removal rate, chipping damage, and surface roughness in the simulated clinical-dental machining of a dental-type glass ceramic were investigated. Significant differences in removal rate were obtained among the fluids investigated, but only a 4 wt% boric acid solution gave a higher removal rate than conventionally used water. Chipping damage was substantially lower for the boric acid and an oil-emulsion coolant compared with other fluids tested. Surface roughness was independent of the fluids used. The results indicate that improvement can be achieved in both material removal rate and machining damage by the appropriate selection of coolant chemistry.

Notes: This paper reviews the structures and properties of 10 binary, ternary, and quaternary crystals within the equilibrium phase diagram of the SiO2–Y2O3–Si3N4 system. They are binary compounds SiO2, Y2O3, Si3N4; ternary compounds Si2N2O, Y2Si2O7, and YSi2O5; and quaternary crystals Y2Si3N4O3 (M-melilite), Y4Si2O7N2, (N-YAM), YSiO2N (wallastonite), and Y10(SiO4)6N2 (N-apatite, N-APT). Although the binary compounds are well-known and extensively studied, the ternary and the quaternary crystals are not. Most of the ternary and the quaternary crystals simply have been referenced as secondary phases in the processing of nitrogen ceramics. Their crystal structures are complex and not precisely determined. In the quaternary crystals, there exists O/N disorder in that the exact atomic positions of the anions cannot be uniquely determined. It is envisioned that a variety of cation–anion bonding configurations exist in these complex crystals. The electronic structure and bonding in these crystals are, therefore, of great interest and are indispensable for a fundamental understanding of structural ceramics. We have used ab initio methods to study the structure and bonding properties of these 10 crystals. For crystals with unknown or incomplete structural information, we use an accurate total energy relaxation scheme to obtain the most likely atomic positions. Based on the theoretically modeled structures, the electronic structure and bonding in these crystals are investigated and related to various local cation–anion bonding configurations. These results are presented in the form of atom-resolved partial density of states, Mulliken effective charges, and bond order values. It is shown that Y–O and Y–N bonding are not negligible and should be a part of the discussion of the overall bonding schemes in these crystals. Spectroscopic properties in the form of complex, frequency-dependent dielectric functions, X-ray absorption near-edge structure (XANES), and the electron energy-loss near-edge structure (ELNES) spectra in these crystals also are calculated and compared. These results are discussed in the context of specific bonding configurations between cations (silicon and yttrium) and anions (oxygen and nitrogen) and their implications on intergranular thin films in polycrystalline Si3N4 containing rare-earth elements.

Notes: Simultaneous synthesis and sintering of hexagonal α-Ti1−x-Alx(N) (0 ≤x≤ 0.08) solid solutions, which contain a small amount of nitrogen, have been performed by a self-propagating high-temperature combustion method under a nitrogen pressure of 4 MPa. Dense materials (∼99% of theoretical) prepared directly from a mixture of elemental (Ti and Al) powders reveal homogeneous microstructure composed of fine grains (12–16 μm). α-Ti1−xAlx(N) (x= 0.02; Ti0.98Al0.02N0.26) exhibits a three-point bending strength σb of 390 MPa, a Vickers hardness Hv of 9.24 GPa, and a fracture toughness KIC of 4.89 MPa·m1/2; their mechanical properties are much improved by doping Al into α-Ti(N), in comparison with those (σb= 245 MPa, Hv= 9.02 GPa, and KIC= 3.77 MPa·m1/2) of α-Ti(N) fabricated under the same conditions.

Notes: Electrophoretic deposition has been used to synthesize nickel–alumina, functionally graded materials from NiO and alumina suspensions in ethanol. Suspension stability and the kinetics of deposition were studied to determine optimum conditions. Deposition starts with an alumina suspension into which a stream of NiO suspension is injected at various flow rates to obtain the desired profiles. The latter were controlled by varying the deposition current density and component flow rate. The green bodies obtained were sintered in Ar/H2 atmosphere to reduce the NiO to nickel. Various gradation profiles were obtained illustrating the facility of EPD to synthesize continuously graded materials. NiO was used as the precursor for nickel to alleviate settling and rough columnar deposit problems.

Notes: Book reviewed in this article: Trees, crops and soil fertility: concepts and research methods. By G. Schroth and F.I. Sinclair (Editors).

Notes: Abstract. Current tillage erosion models account for the influence of tillage direction in the magnitude of the soil transport coefficient. It is argued that a re-modelling of tillage erosion is preferable in which the influence of tillage direction is separated from the soil transport coefficient, which is a measure of tillage intensity. This has been achieved here by developing a two-dimensional tillage erosion model that incorporates tillage direction in the measure of slope and uses soil transport coefficients that are independent of tillage direction and based on relationships between transport and the slope in the direction that bisects tillage direction and the overturning direction. Mean tillage erosion, associated with a single pair of opposing tillage directions and pair of overturning directions, can be described by a two-dimensional diffusion-type equation if the dimensions are defined as the tillage direction and the direction perpendicular to tillage. Application of the model to a real-world case allows quantification of the potential soil conservation benefits associated with optimization of tillage direction. The scope for amelioration is related to the ratio between the coefficients for transport in the direction of tillage and perpendicular to tillage. As this ratio approaches unity, the potential for amelioration reduces towards zero. For the study site investigated, use of the experimentally derived ratio of 0.66 indicated that a 12% reduction in tillage erosion could be obtained by ploughing across the dominant field slope as compared to ploughing up and down the dominant slope. For an implement with a coefficient ratio of 0.2 the reduction in tillage erosion intensity, associated with optimizing the tillage direction, reaches 28%. Nevertheless, such benefits must be considered in the context of other management considerations. The tillage direction that minimizes erosion is associated with lateral slopes of 10°, or more, over 20% of the field. To the land-user this disadvantage may outweigh the soil conservation benefits.

Notes: Abstract. Efforts to understand the fate of organochlorine compounds in arable soil have concentrated on anthropogenic compounds, in spite of the fact that organochlorine compounds are both produced and mineralized in soil through natural processes. In order to understand the fate of chlorinated pesticides, it is necessary to take account of the natural chlorine cycle. The present study is a first attempt to illuminate the relationship between the natural chlorine cycle and agricultural practices. The concentration and storage of organic chlorine (Clorg) and chloride (Clinorg) were determined in topsoil of a paddy field compared to an adjacent afforested hill at a sampling site in the Meicun area, Anhui Province, China. The concentration of Clorg, as well as the chlorine-to-carbon ratio, was significantly lower in the paddy field samples than in the forest soil samples. A weak relationship between the concentration of Clorg and the organic carbon content was observed in the paddy field, in contrast to the observations made in the adjacent forest soil as well as those made in previous studies, which have suggested a positive correlation between organic carbon content and Clorg. The similarity between our results at the forest site and the previous studies, which have been carried out in temperate regions, suggests that it is the land use rather than the climate that makes the current paddy soil results different. Our results suggest that the contribution of Clorg to the paddy soil from above-ground litter and from production within the soil are small or negligible compared with the contribution from pesticide application and wet and dry deposition.

Notes: Book reviewed in this article: The Identification of Soils for Forest Management. By Fiona Kennedy.

Notes: Abstract. A no-tillage (NT) system was developed in semiarid Morocco to improve the soil fertility and stabilize yield through conservation of water. Results in two long-term trials (4 and 11 years) were able to show the effects of a no-tillage system in increasing total soil organic matter and total nitrogen. Over time, the quality of the NT soil surface was improved compared with that under conventional tillage (CT) with disc harrows. This effect was the result of an increase in soil organic carbon (SOC) and a slight decline in pH. However, over time, nitrogen decreased in both tillage practices, especially in the 0–25 mm layer (from 0.59 to 0.57 t ha−1 and from 0.44 to 0.42 t ha−1 under NT and CT, respectively). After 4 years of NT an extra 5.62 t ha−1 of SOC was sequestered in the 0–25 mm layer, and after 11 years the SOC increased further to 7.21 t ha−1.

Notes: Book reviewed in this article: Agriculture, Hydrology and Water Quality. By P.M. Haygarth and S.C. Jarvis (Editors).