ALBERT

Description: The origin of the population of very massive stars observed within ∼0.4 pc of the supermassive black hole in the Galactic Centre is a mystery. Tidal forces from the black hole would likely inhibit in situ star formation whilst the youth of the massive stars would seem to exclude formation elsewhere followed by transportation (somehow) into the Galactic Centre. Here, we consider a third way to produce these massive stars from the lower mass stars contained in the nuclear stellar cluster which surrounds the supermassive black hole. A passing gas cloud can be tidally shredded by the supermassive black hole forming an accretion disc around the black hole. Stars embedded within this accretion disc will accrete gas from the disc via Bondi–Hoyle accretion, where the accretion rate on to a star, $dot{M}_star propto M_star ^2$. This super-exponential growth of accretion can lead to a steep increase in stellar masses, reaching the required 40–50 M⊙ in some cases. The mass growth rate depends sensitively on the stellar orbital eccentricities and their inclinations. The evolution of the orbital inclinations and/or their eccentricities as stars are trapped by the disc, and their orbits are circularized, will increase the number of massive stars produced. Thus accretion on to low-mass stars can lead to a top heavy stellar mass function in the Galactic Centre and other galactic nuclei. The massive stars produced will pollute the environment via supernova explosions and potentially produce compact binaries whose mergers may be detectable by the LIGO–VIRGO gravitational waves observatories.

Description: We present a 3D semi-analytical model of self-gravitating discs, and include a prescription for dust trapping in the disc spiral arms. Using Monte Carlo radiative transfer, we produce synthetic ALMA (Atacama Large Millimeter/submillimeter Array) observations of these discs. In doing so, we demonstrate that our model is capable of producing observational predictions, and able to model real image data of potentially self-gravitating discs. For a disc to generate spiral structure that would be observable with ALMA requires that the disc’s dust mass budget is dominated by millimetre- and centimetre-sized grains. Discs in which grains have grown to the grain fragmentation threshold may satisfy this criterion; thus, we predict that signatures of gravitational instability may be detectable in discs of lower mass than has previously been suggested. For example, we find that discs with disc-to-star mass ratios as low as 0.10 are capable of driving observable spiral arms. Substructure becomes challenging to detect in discs where no grain growth has occurred or in which grain growth has proceeded well beyond the grain fragmentation threshold. We demonstrate how we can use our model to retrieve information about dust trapping and grain growth through multiwavelength observations of discs, and using estimates of the opacity spectral index. Applying our disc model to the Elias 27, WaOph 6, and IM Lup systems, we find gravitational instability to be a plausible explanation for the observed substructure in all three discs, if sufficient grain growth has indeed occurred.

Description: The star formation in molecular clouds is inefficient. The ionizing extreme-ultraviolet radiation (hν ≥ 13.6 eV) from young clusters has been considered as a primary feedback effect to limit the star formation efficiency (SFE). Here, we focus on the effects of stellar far-ultraviolet (FUV) radiation (6 eV ≤ hν ≤ 13.6 eV) during the cloud disruption stage. The FUV radiation may further reduce the SFE via photoelectric heating, and it also affects the chemical states of the gas that is not converted to stars (‘cloud remnants’) via photodissociation of molecules. We have developed a one-dimensional semi-analytical model that follows the evolution of both the thermal and chemical structure of a photodissociation region (PDR) during the dynamical expansion of an H ii region. We investigate how the FUV feedback limits the SFE, supposing that the star formation is quenched in the PDR where the temperature is above a threshold value (e.g. 100 K). Our model predicts that the FUV feedback contributes to reduce the SFEs for massive (Mcl ≳ 105 M⊙) clouds with low surface densities ($Sigma _{ m cl}lesssim 100~{ m M}_odot , { m pc}^{-2}$). Moreover, we show that a large part of the H2 molecular gas contained in the cloud remnants should be ‘CO-dark’ under the FUV feedback for a wide range of cloud properties. Therefore, the dispersed molecular clouds are potential factories of CO-dark gas, which returns into the cycle of the interstellar medium.

Description: The Pan-STARRS1 (PS1) 3π survey is a comprehensive optical imaging survey of three quarters of the sky in the grizy broad-band photometric filters. We present the methodology used in assembling the source classification and photometric redshift (photo-z) catalogue for PS1 3π Data Release 1, titled Pan-STARRS1 Source Types and Redshifts with Machine learning (PS1-STRM). For both main data products, we use neural network architectures, trained on a compilation of public spectroscopic measurements that has been cross-matched with PS1 sources. We quantify the parameter space coverage of our training data set, and flag extrapolation using self-organizing maps. We perform a Monte-Carlo sampling of the photometry to estimate photo-z uncertainty. The final catalogue contains 2,902,054,648 objects. On our validation data set, for non-extrapolated sources, we achieve an overall classification accuracy of $98.1\%$ for galaxies, $97.8\%$ for stars, and $96.6\%$ for quasars. Regarding the galaxy photo-z estimation, we attain an overall bias of =0.0005, a standard deviation of σ(Δznorm) = 0.0322, a median absolute deviation of MAD(Δznorm) = 0.0161, and an outlier fraction of $Pleft(|Delta z_{mathrm{norm}}|〉0.15 ight)=1.89\%$. The catalogue will be made available as a high-level science product via the Mikulski Archive for Space Telescopes.

Description: The aerosol size distribution and cloud condensation nuclei (CCN) number concentration were measured using a wide-range particle spectrometer (WPS) and a cloud condensation nuclei counter (CCNC) on Mt. Tian from 31 July to 9 September, 2019. Combined with meteorological data, distribution characteristics of aerosol size and CCN and their influencing factors were analyzed. The results indicated that the mean aerosol number concentration was 5475.6 ± 5636.5 cm−3. The mean CCN concentrations were 183.7 ± 114.5 cm−3, 729.8 ± 376.1 cm−3, 1630.5 ± 980.5 cm−3, 2162.5 ± 1345.3 cm−3, and 2575.7 ± 1632.9 cm−3 at supersaturation levels of 0.1%, 0.2%, 0.4%, 0.6%, and 0.8%, respectively. The aerosol number size distribution is unimodal, and the dominant particle size is 30–60 nm. Affected by the height of the boundary layer and the valley wind, the diurnal variation in aerosol number concentration shows a unimodal distribution with a peak at 17:00, and the CCN number concentration showed a bimodal distribution with peaks at 18:00 and 21:00. The particle size distribution and supersaturation have a major impact on the activation of the aerosol into CCN. At 0.1% supersaturation (S), the 300–500 nm particles are most likely to activate to CCN. Particles of 100–300 nm are most easily activated at 0.2% (S), while particles of 60–80 nm are most likely activated at high supersaturation (≥0.4%). The concentrations of aerosol and CCN are higher in the northerly wind. Ambient relative humidity (RH) has little relationship with the aerosol activation under high supersaturation. According to N = CSk fitting the CCN spectrum, C = 3297 and k = 0.90 on Mt. Tian, characteristic of the clean continental type.

Description: This paper presents a novel lattice based biomimetic neural network trained by means of a similarity measure derived from a lattice positive valuation. For a wide class of pattern recognition problems, the proposed artificial neural network, implemented as a dendritic hetero-associative memory delivers high percentages of successful classification. The memory is a feedforward dendritic network whose arithmetical operations are based on lattice algebra and can be applied to real multivalued inputs. In this approach, the realization of recognition tasks, shows the inherent capability of prototype-class pattern associations in a fast and straightforward manner without need of any iterative scheme subject to issues about convergence. Using an artificially designed data set we show how the proposed trained neural net classifies a test input pattern. Application to a few typical real-world data sets illustrate the overall network classification performance using different training and testing sample subsets generated randomly.

Description: The atmospheric boundary layer height is important for constraining air pollution and meteorological models. This study attempted to validate the MODIS-estimated atmospheric boundary layer height (ABLH), and variation in the ABLH in Uganda was evaluated. The ABLH was estimated from MODIS data using the mixing ratio profile gradient method and compared to the ABLH estimated from radiosonde data using three different methods. Unlike in studies in other regions of the world, correlations between ABLH estimated using MODIS and radiosonde data were weak, implying limited usefulness of MODIS data for determining ABLH. However, the diurnal variation in MODIS-derived ABLH and particulate matter (PM10) was consistent with the expected inverse relationship between PM10 mass concentration and ABLH, and the mean MODIS-derived ABLH values were significantly lower during wet seasons than dry seasons, as expected.

Description: Ghana is urbanising rapidly, and over half of the country’s population have lived in urban areas since 2010. Although research has proliferated to explore Ghana’s urbanisation, there is a dearth of research that holistically explores the wider sustainability implications of urbanisation, offers comparative perspectives in the context of large and smaller urban areas, and provides a perspective of local level urbanisation in the context of resource extraction (mining). This study comparatively assesses two urban areas in Ghana (Kumasi and Obuasi), by conducting a spatio-temporal analysis of land cover change through remote sensing and by analysing demographic change through a synthesis of published population data, in order to highlight the sustainability implications of urbanisation. The results show that urbanisation has been rapid, and has resulted in changes in land cover and demography in Kumasi and Obuasi. The sustainability implications of urbanisation are identified to include limited economic opportunities, socio-spatial segregation, and destruction of natural vegetation. The evidence in this study provides insights into urbanisation in Ghana, and suggests that the positive sustainability impacts of urbanisation may be eroded by how factors such as market forces and land tenure interact at the local level.

Description: In our previous studies, we investigated the performance of a novel pneumatic planar magnetic separator (PMS) for the dry beneficiation of a selected magnetite ore. In the present study, we have extended the studies on the PMS with the focus on investigating how various PMS processing flowsheet configurations influence its performance. The outcomes were subsequently compared with those of a Davis tube recovery (DTR) tester. The study demonstrated that the use of PMS in the dry beneficiation of magnetite ores is feasible, and operating the PMS in different flowsheet configurations positively influences the magnetite concentrate grade and purity. Finally, the study showed that the PMS performance compares well with that of DTR and can potentially replace DTR in operations that are carried out in arid regions.

Description: Ablation of BaWO4 Raman crystals with different impurity concentrations by ultrashort laser pulses was experimentally studied. Laser pulses with duration varying from 0.3 ps to 1.6 ps at wavelengths of 515 nm and 1030 nm were applied. A single-pulse optical damage threshold of the crystal surface changed from 1.3 J/cm2 to 4.2 J/cm2 depending on the laser pulse parameters and BaWO4 crystal purity. The optical damage threshold under multi-pulse irradiation was an order of magnitude less.

Description: Stunting is highly prevalent in Indonesian children. The objective of this study was to identify the associations of stunting with morbidity, parental education and socioeconomic status (SES) in Indonesian children. The study population was part of the South East Asian Nutrition Surveys (SEANUTS). A total of 2236 Indonesian children aged 0.5 to 12 years, who had participated in the SEANUTS, were included in this study. Stunting was defined as height for age Z-score (HAZ) ≤ −2 using WHO criteria and severe stunting as HAZ ≤ −3. Information on morbidity, parental education and family SES were collected by structured questionnaires. ANOVA was used for evaluating differences across groups, with or without correction for confounders. The results showed that the overall prevalence of stunting was 31.4%. HAZ in stunted children was associated with disease incidence, including frequency, parental education and family income. There were no significant differences in HAZ values in stunted children with one or more bouts of infectious, digestive tract or respiratory tract illnesses compared to stunted children with no reported illness. The prevalence of stunting in Indonesian children was high and was strongly associated with child morbidity, parental education and SES.

Description: Background: In Spain, colorectal cancer screening using the fecal occult blood test, targeted towards the 50–69 age bracket, was implemented on different dates. We aim to assess the temporal trend of colorectal cancer (CRC) screening uptake according to the year of screening implementation in each region and to identify predictors for the uptake of CRC screening. Methods: A cross-sectional study with 12,657 participants from the Spanish National Health Surveys 2011 and 2017 was used. Uptake rates were analyzed according to the date that the screening program was implemented. Results: For regions with programs implemented before 2011, the uptake rate increased 3.34-fold from 2011 to 2017 (9.8% vs. 32.7%; p 〈 0.001). For regions that implemented screening within the 2011–2016 period, the uptake rose from 4.3% to 13.2% (3.07-fold; p 〈 0.001), and for regions that implemented screening after 2016, the uptake increased from 3.4% to 8.8% (2.59-fold; p 〈 0.001). For the entire Spanish population, the uptake increased 3.21-fold (6.8% vs. 21.8%; p 〈 0.001). Positive predictors for uptake were older age, Spanish nationality, middle-to-high educational level, suffering chronic diseases, non-smoking and living in regions where screening programs were implemented earlier. Conclusions: The different periods for the implementation of CRC screening as well as sociodemographic and health inequalities may have limited the improvement in the screening uptake from 2011 to 2017 in Spain.

Description: Partial and total photoionization cross sections of iron-peak elements are important for the determination of abundances in late-type stars and nebular objects. We have investigated photoionization of neutral chromium from the ground and excited states in the low energy region from the first ionization threshold at 6.77 eV to 30 eV. Accurate descriptions of the initial bound states of Cr I and the final residual Cr II ionic states have been obtained in the multiconfiguration Hartree-Fock method together with adjustable configuration expansions and term-dependent non-orthogonal orbitals. The B-spline R-matrix method has been used for the calculation of photoionization cross sections. The 194 LS final ionic states of Cr II 3d44s, 3d34s2, 3d5, 3d44p, and 3d34s4p principal configurations have been included in the close-coupling expansion. The inclusion of all terms of these configurations has significant impact on the near-threshold resonance structures as well as on the nonresonant background cross sections. Total photoionization cross sections from the ground 3d54sa7S and excited 3d54sa5S, 3d44s2a5D, 3d54pz5P, and 3d44s4py5P states of Cr I have been compared with other available R-matrix calculation to estimate the likely uncertainties in photoionization cross sections. We analyzed the partial photoionization cross sections for leaving the residual ion in various states to identify the important scattering channels, and noted that 3d electron ionization channel becomes dominant at higher energies.

Description: The optimization of ecological resource allocation is increasingly seen as a potential solution for urban revitalization and sustainable land use planning, and the key point is to assess and simulate the spatial arrangement of the ecological land. In this study, we proposed a conceptual framework with the aim of reoccupying ecological resources for rust belt cities from the perspective of eco-economic trade-offs. The ecological security pattern, the urban development pattern, and the ecological quality of cropland were constructed and evaluated to measure the development level of an ecological system and a socio-economic system. Furthermore, the results were used as the constraints that influenced land use distribution to simulate the ecological land reoccupation pattern. The suitable area, the preservation area, the configurable area, and the unsuitable area in the reoccupation pattern accounted for 6.94%, 49.97%, 28.17%, and 0.69%, respectively. Significantly, under strict cropland protection policies, the available space for ecological land expansion was heavily compressed. Therefore, the emphasis on agricultural production should be reexamined to release more space for ecological resources. This method could be an effective pathway to alleviate the pressures on urban and natural space caused by the competition between land-use activities, such as economic development, agricultural production, and ecological conservation. The findings are expected to promote urban revitalization, green agriculture, and sustainable social development in rust belt cities, and provide certain references for the utilization of land resources and regional policy making.

Description: Festivals are experiential products heavily depending on the recommendations of previous visitors. With the power of social media growing, understanding the antecedents of positive electronic word-of-mouth (eWOM) intentions of festival attendees is immensely beneficial for festival organizers to better promote their festivals and control negative publicity. However, there is still limited research regarding eWOM intentions in the festival context. Thus, this study aims to fill such a gap by investigating the relationships among festival attendees’ enjoyment seeking motivation, perceived value, visitor satisfaction, and eWOM intention in a local festival setting. Additionally, the moderating role of gender was tested as it is one of the most important demographic variables to show individual differences in behavioral intentions. The results of structural equation modeling showed a positive effect of enjoyment seeking motivation on perceived value, visitor satisfaction, and eWOM intention. Moreover, gender differences in eWOM intention and a full mediating effect of visitor satisfaction between perceived value and eWOM intention for female respondents were revealed. The findings of this study extend the existing festival literature and provide insights for strategically organizing and promoting festivals to generate more positive eWOM which can be utilized as an effective marketing tool and a feedback channel.

Description: H-umbilicity was introduced as an analogue of total umbilicity for Lagrangian submanifolds since, in some relevant cases, totally umbilical Lagrangian submanifolds are automatically totally geodesic. In this paper, we show that, in the homogeneous nearly Kähler S3×S3, also H-umbilical Lagrangian submanifolds are automatically totally geodesic.

Description: Given a graph G without isolated vertices, a total Roman dominating function for G is a function f:V(G)→{0,1,2} such that every vertex u with f(u)=0 is adjacent to a vertex v with f(v)=2, and the set of vertices with positive labels induces a graph of minimum degree at least one. The total Roman domination number γtR(G) of G is the smallest possible value of ∑v∈V(G)f(v) among all total Roman dominating functions f. The total Roman domination number of the direct product G×H of the graphs G and H is studied in this work. Specifically, several relationships, in the shape of upper and lower bounds, between γtR(G×H) and some classical domination parameters for the factors are given. Characterizations of the direct product graphs G×H achieving small values (≤7) for γtR(G×H) are presented, and exact values for γtR(G×H) are deduced, while considering various specific direct product classes.

Description: A modified expression of the electron entropy production in a plasma is deduced by means of the Kelly equations of state instead of the ideal gas equations of state. From the Debye–Hückel model which considers the interaction between the charges, such equations of state are derived for a plasma and the entropy is deduced. The technique to obtain the modified entropy production is based on usual developments but including the modified equations of state giving the regular result plus some extra terms. We derive an expression of the modified entropy production in terms of the tensorial Hermitian moments hr1…rm(m) by means of the irreducible tensorial Hermite polynomials.

Description: Renewable energy is the key pillar and plays an important role in the energy systems of European Union member states and in mitigating climate change. It is supporting the transition towards a greener, resource-efficient and more competitive, low-carbon European Union economy. Above-average, average and below-average values of monitored indicators in member states of the European Union in 2009–2016 were ascertained by using principal component analysis. Monitored indicators of the renewable energy sector included electricity generation, electricity capacity, investments of public financial institutions, number of employees and turnover achieved from the economic activities related to production, distribution, installation, operation and maintenance of equipment (all of them per capita). Based on the achieved results, we can state that the situation changed during the period under review. Member states have moved between above-average, average and below-average levels of renewable energy indicators. However, a lack of change in the indicators was recorded in some member states throughout the eight-year period (Finland, France, Ireland, Germany, Austria and Spain did not move significantly). Renewable energy sources (hydro, wind, solar, geothermal and energy from biomass) were evaluated as a whole due to different natural, economic and legislative conditions of European Union countries.

Description: As acidic deposition has decreased across Eastern North America, forest soils at some sites are beginning to show reversal of soil acidification. However, the degree of recovery appears to vary and is not fully explained by deposition declines alone. To assess if other site and soil factors can help to explain degree of recovery from acid deposition, soil resampling chemistry data (8- to 24-year time interval) from 23 sites in the United States and Canada, located across 25° longitude from Eastern Maine to Western Ontario, were explored. Site and soil factors included recovery years, sulfate (SO42−) deposition history, SO42− reduction rate, C horizon pH and exchangeable calcium (Ca), O and B horizon pH, base saturation, and exchangeable Ca and aluminum (Al) at the time of the initial sampling. We found that O and B horizons that were initially acidified to a greater degree showed greater recovery and B horizon recovery was further associated with an increase in recovery years and lower initial SO42− deposition. Forest soils that seemingly have low buffering capacity and a reduced potential for recovery have the resilience to recover from the effects of previous high levels of acidic deposition. This suggests, that predictions of where forest soils acidification reversal will occur across the landscape should be refined to acknowledge the importance of upper soil profile horizon chemistry rather than the more traditional approach using only parent material characteristics.

Description: The genus Thujopsis (Cupressaceae) comprises monoecious coniferous trees endemic to Japan. This genus includes two varieties: Thujopsis dolabrata (L.f.) Siebold et Zucc. var. dolabrata (southern variety, Td) and Thujopsis dolabrata (L.f.) Siebold et Zucc. var. hondae Makino (northern variety, Th). The aim of this study is to understand the phylogeographic and genetic population relationships of the genus Thujopsis for the conservation of genetic resources and future breeding. A total of 609 trees from 22 populations were sampled, including six populations from the Td distribution range and 16 populations from the Th distribution range. The genotyping results for 19 expressed sequence tag (EST)-based simple sequence repeat (SSR) markers, followed by a structure analysis, neighbor-joining tree creation, an analysis of molecular variance (AMOVA), and hierarchical F statistics, supported the existence of two genetic clusters related to the distribution regions of the Td and Th varieties. The two variants, Td and Th, could be defined by their provenance, in spite of the ambiguous morphological differences between the varieties. The distribution ranges of both variants, which have been defined from their morphology, was confirmed by genetic analysis. The Th populations exhibited relatively uniform genetic diversity, most likely because Th refugia in the glacial period were scattered throughout their current distribution area. On the other hand, there was a tendency for Td’s genetic diversity to decrease from central to southern Honshu island. Notably, the structure analysis and neighbor-joining tree suggest the hybridization of the two varieties in the contact zone. More detailed studies of the genetic structure of Td are required in future analyses.

Description: In this paper, we go through the development of a new numerical method to obtain the solution to a size-structured population model that describes the evolution of a consumer feeding on a dynamical resource that reacts to the environment with a lag-time response. The problem involves the coupling of the partial differential equation that represents the population evolution and an ordinary differential equation with a constant delay that describes the evolution of the resource. The numerical treatment of this problem has not been considered before when a delay is included in the resource evolution rate. We analyzed the numerical scheme and proved a second-order rate of convergence by assuming enough regularity of the solution. We numerically confirmed the theoretical results with an academic test problem.

Description: Ice accretion is a phenomenon whereby super-cooled water droplets impinge and accrete on wall surfaces. It is well known that the icing may cause severe accidents via the deformation of airfoil shape and the shedding of the growing adhered ice. To prevent ice accretion, electro-thermal heaters have recently been implemented as a de- and anti-icing device for aircraft wings. In this study, an icing simulation method for a two-dimensional airfoil with a heating surface was developed by modifying the extended Messinger model. The main modification is the computation of heat transfer from the airfoil wall and the run-back water temperature achieved by the heater. A numerical simulation is conducted based on an Euler–Lagrange method: a flow field around the airfoil is computed by an Eulerian method and droplet trajectories are computed by a Lagrangian method. The wall temperature distribution was validated by experiment. The results of the numerical and practical experiments were in reasonable agreement. The ice shape and aerodynamic performance of a NACA 0012 airfoil with a heater on the leading-edge surface were computed. The heating area changed from 1% to 10% of the chord length with a four-degree angle of attack. The simulation results reveal that the lift coefficient varies significantly with the heating area: when the heating area was 1.0% of the chord length, the lift coefficient was improved by up to 15%, owing to the flow separation instigated by the ice edge; increasing the heating area, the lift coefficient deteriorated, because the suction peak on the suction surface was attenuated by the ice formed. When the heating area exceeded 4.0% of the chord length, the lift coefficient recovered by up to 4%, because the large ice near the heater vanished. In contrast, the drag coefficient gradually decreased as the heating area increased. The present simulation method using the modified extended Messinger model is more suitable for de-icing simulations of both rime and glaze ice conditions, because it reproduces the thin ice layer formed behind the heater due to the runback phenomenon.

Description: Geospatial data is urgently needed in decision-making processes to achieve Sustainable Development Goals (SDGs) at global, national, regional and local scales. While the advancement of geo-technologies to obtain or produce geospatial data has become faster and more affordable, many countries in the global south still experience a geospatial data scarcity at the rural level due to complex geographical terrains, weak coordination among institutions and a lack of knowledge and technologies to produce visualised geospatial data like maps. We proposed a collaborative spatial learning framework that integrates the spatial knowledge of stakeholders to obtain geospatial data. By conducting participatory mapping workshops in three villages in the Deli Serdang district in Indonesia, we tested the framework in terms of facilitating communication and collaboration of the village stakeholders while also supporting knowledge co-production and social learning among them. Satellite images were used in digital and non-digital mapping workshops to support village stakeholders to produce proper village maps while fulfilling the SDGs’ emphasis to make geospatial data available through a participatory approach.

Description: While food insecurity (FI) has been extensively studied in many countries, there have been few empirical contributions in Poland to date. The main objective of our research was to identify the socio-demographic factors affecting the risk of FI in Poland within 2014–2019. Moreover, we aimed to examine the effects of the family-oriented social program “Family 500+” by comparing the situation in various types of households with children a few years before and after the program was launched. The analysis was based on the set of eight-item FI indicators adopted by the Food and Agriculture Organization using the Gallup World Poll nationally representative survey data. Based on our results the most vulnerable groups in the context of FI were identified. We confirmed the importance of education, gender, age, marital status, household composition, status of employment and income in preventing FI. The effectiveness of the support program in reducing FI was demonstrated as households with at least three children experienced significant improvement in the FI status during the studied years. These findings should be especially important in the context of the impact of the COVID-19 pandemic on FI. As FI can affect the quality and quantity of food choices it is associated with a poorer health status, which increases the risk of infection, including COVID-19, and worsens recovery prognosis. Planning an efficient response to the pandemic requires a comprehension of the increased risk of exposure experienced by people, especially those who are food insecure.

Description: Generally running with frequent braking over short distances, the urban rail transit train generates great quantities of regenerative braking energy (RBE). The RBE feedback system can effectively recycle RBE and give it back to the AC grid. However, the lack of damp and inertia of generators makes conventional PWM RBE feedback system more sensitive to power fluctuations. To address this issue, a synchronverter-based RBE feedback system of urban rail transit is designed in this paper. First, the structure of the feedback system is presented. Then, the synchronverter-based control strategy with greater flexibility and higher stability is fully discussed. Furthermore, the parameter design of the system is analyzed in detail. Finally, simulation results and experimental results are provided to show the good dynamic performance of the system. Using this synchronverter-based approach, the system supplies traction power to the traction network when the train accelerates and gives the RBE back to the AC grid when the train brakes, in light of the variation of the DC bus voltage. Moreover, the system can be self-synchronized with the AC grid and make corresponding power management on the basis of changes in the voltage amplitude as well as the frequency of the grid. In this sense, the RBE feedback system becomes more flexible, effective and robust.

Description: Increasing wind power generation has been introduced into power systems to meet the renewable energy targets in power generation. The output efficiency and output power stability are of great importance for wind turbines to be integrated into power systems. The wake effect influences the power generation efficiency and stability of wind turbines. However, few studies consider comprehensive corrections in an aerodynamic model and a turbulence model, which challenges the calculation accuracy of the velocity field and turbulence field in the wind turbine wake model, thus affecting wind power integration into power systems. To tackle this challenge, this paper proposes a modified Reynolds-averaged Navier–Stokes (MRANS)-based wind turbine wake model to simulate the wake effects. Our main aim is to add correction modules in a 3D aerodynamic model and a shear-stress transport (SST) k-ω turbulence model, which are converted into a volume source term and a Reynolds stress term for the MRANS-based wake model, respectively. A correction module including blade tip loss, hub loss, and attack angle deviation is considered in the 3D aerodynamic model, which is established by blade element momentum aerodynamic theory and an improved Cauchy fuzzy distribution. Meanwhile, another correction module, including a hold source term, regulating parameters and reducing the dissipation term, is added into the SST k-ω turbulence model. Furthermore, a structured hexahedron mesh with variable size is developed to significantly improve computational efficiency and make results smoother. Simulation results of the velocity field and turbulent field with the proposed approach are consistent with the data of real wind turbines, which verifies the effectiveness of the proposed approach. The variation law of the expansion effect and the double-hump effect are also given.

Description: The lack of a universal simulation method for triboelectric nanogenerator (TENG) makes the device design and optimization difficult before experiment, which protracts the research and development process and hinders the landing of practical TENG applications. The existing electrostatic induction models for TENGs have limitations in simulating TENGs with complex geometries and their dynamic behaviors under practical movements due to the topology change issues. Here, a dynamic finite element method (FEM) model is proposed. The introduction of air buffer layers and the moving mesh method eliminates the topology change issues during practical movement and allows simulation of dynamic and time-varying behaviors of TENGs with complex 2D/3D geometries. Systematic investigations are carried out to optimize the air buffer thickness and mesh densities, and the optimized results show excellent consistency with the experimental data and results based on other existing methods. It also shows that a 3D disk-type rotating TENG can be simulated using the model, clearly demonstrating the capability and superiority of the dynamic FEM model. Moreover, the dynamic FEM model is used to optimize the shape of the tribo-material, which is used as a preliminary example to demonstrate the possibility of designing a TENG-based sensor.

Description: For the first time, the distribution and modifications of living ostracod associations present in the Gulf of Trieste (GoT) in relation to alterations caused by human activity in the last 20 years were investigated. The results were compared with the main physicochemical parameters (especially nitrogen and phosphorus) measured over the same period, which can lead to a general decrease in environmental quality. For a more in-depth analysis of the changes recorded by ostracods in the last 50 years, a period in which eutrophication and anoxia increased, we revisited the study carried out by Masoli in the GoT in 1967. The results obtained made it possible to verify how, over the last 20 years, ostracod assemblages have suffered a decrease both qualitatively and quantitatively. Most of the species recovered show characteristics of opportunism and tolerance to environmentally stressful conditions, high organic matter concentrations, and oxygen deficiency. The ostracods analyzed in 1967 showed similar results with few dominant opportunistic species. We verified how ostracods recorded in GoT, similar to Mollusks and Foraminifera, have been impaired by the possible environmental crisis linked to the recurrence of mucilage and hypoxic events documented for the GoT in the last 50 years. Finally, a comparison with the best environmental conditions found in the Marine Nature Reserve of Miramare (MPA) allowed us to emphasize the important role of protected areas to avoid loss of biodiversity due to urbanization.

Description: In 2017, the Government of Mozambique declared localized acute malnutrition crises in a range of districts across Mozambique including Cabo Delgado. This is in spite of intensive efforts by different non-governmental organizations (NGO) and the Government of Mozambique to expand access to information on good nutritional practices as well as promote nutrition-specific interventions, such as cooking demonstrations, home gardens and the distribution of micronutrient powder to children. This paper examines and discusses key nutritional influences on the health of pregnant and breastfeeding mothers in Cabo Delgado province, Mozambique. We conducted 21 key informant interviews (KIIs) with a wide range of stakeholders and 16 in-depth interviews (IDIs) with women. In addition, we conducted four focus group discussions with each of the following groups: (1) pregnant adolescent girls, (2) pregnant women 〉20 yrs, (3) women 〉20 yrs with babies 20 yrs of children

Description: Environmental protection and sustainable development have become an inevitable trend in many areas, including the energy industry. The development of energy supply networks is strongly correlated with the economics of energy sources as well as ecological and socio-political issues. However, the energy supply network is often distant from the social perspective. This paper therefore combines examination of perceptions and awareness of general public (web-based questionnaire) and top energy experts (a Delphi survey) on the energy supply network and identifies their potential integration in energy supply decision making processes. The results showed that public should be better informed as well as integrated into designing energy supply network as the prosumers gain power and the energy suppliers will no longer dominate the market. Public actors are ready to shape sustainable energy supply and also willing to pay 5.8% more for a sustainable energy supply. The majority are prepared to invest in renewable energy supply network close to their place of residence. Another result is that the public is calling for a shift in priority towards more sustainable and socially friendlier energy supply rather than focusing mainly on the economic and technical perspectives.

Description: The present theoretical work endeavors to solve the Sutterby nanofluid flow and heat transfer problem over a permeable moving sheet, together with the presence of thermal radiation and magnetohydrodynamics (MHD). The fluid flow and heat transfer features near the stagnation region are considered. A new form of similarity transformations is introduced through scaling group analysis to simplify the governing boundary layer equations, which then eases the computational process in the MATLAB bvp4c function. The variation in the values of the governing parameters yields two different numerical solutions. One of the solutions is stable and physically reliable, while the other solution is unstable and is associated with flow separation. An increased effect of the thermal radiation improves the rate of convective heat transfer past the permeable shrinking sheet.

Description: In this study, the flotation behavior of malachite was investigated using hydrophobic talc nanoparticles (TNs) as collectors. To improve the floatability of TN-deposited malachite, various experimental parameters were systematically investigated. We found that the floatability sharply increased as the size of the TNs decreased. The floatability of malachite was enhanced in the presence of smaller TNs, since higher amounts of smaller TNs were deposited on the surface of the malachite, thus rendering the surface more hydrophobic. Moreover, the floatability of the TN-deposited malachite increased as the pH decreased, likely due to the more favorable interaction between TNs and malachite by means of electrostatic attraction. Furthermore, the floatability became more enhanced as the TN concentration increased, likely associated with increases in the amount of TNs deposited on the surface of the malachite, thus enhancing the floatability by altering the hydrophobicity of the surface. Our findings suggest that the application of natural hydrophobic TNs as collectors in malachite flotation should be introduced as a new concept.

Description: Knowledge gaps remain regarding the cardiorespiratory impacts of ambient volatile organic compounds (VOCs) for the general population. This study identified contributing sources to ambient VOCs and estimated the short-term effects of VOC apportioned sources on daily emergency hospital admissions for cardiorespiratory diseases in Hong Kong from 2011 to 2014. We estimated VOC source contributions using fourteen organic chemicals by positive matrix factorization. Then, we examined the associations between the short-term exposure to VOC apportioned sources and emergency hospital admissions for cause-specific cardiorespiratory diseases using generalized additive models with polynomial distributed lag models while controlling for meteorological and co-pollutant confounders. We identified six VOC sources: gasoline emissions, liquefied petroleum gas (LPG) usage, aged VOCs, architectural paints, household products, and biogenic emissions. We found that increased emergency hospital admissions for chronic obstructive pulmonary disease were positively linked to ambient VOCs from gasoline emissions (excess risk (ER%): 2.1%; 95% CI: 0.9% to 3.4%), architectural paints (ER%: 1.5%; 95% CI: 0.2% to 2.9%), and household products (ER%: 1.5%; 95% CI: 0.2% to 2.8%), but negatively associated with biogenic VOCs (ER%: −6.6%; 95% CI: −10.4% to −2.5%). Increased congestive heart failure admissions were positively related to VOCs from architectural paints and household products in cold seasons. This study suggested that source-specific VOCs might trigger the exacerbation of cardiorespiratory diseases.

Description: Although fatigue usually goes unnoticed, it is a symptom that poses great challenges to patients with fibromyalgia and is a strong limitation. The aim of this study is to identify and describe the variables involved in fatigue in nine different situations of the Goal Pursuit Questionnaire (GPQ) that may occur in the daily lives of women with fibromyalgia, according to an ABC (Antecedents–Behaviors–Consequences) model. This study followed a qualitative descriptive research method and a deductive–inductive hybrid approach based on a phenomenological paradigm. Twenty-six women with fibromyalgia participated in focus group discussions between February and March of 2018. Thematic content analysis was carried out from transcribed verbatim interviews. We identified nine major themes that emerged from the participants’ conversations: self-imposed duties, muscle fatigue, overwhelming feeling of tiredness, difficulty thinking, difficulty concentrating, negative emotions, lifestyle changes, affected everyday activities, and lack of motivation for daily activities and social interactions. We conclude that the ABC model allowed certain elements to emerge regarding the fatigue experience, highlighting its importance as a symptom in fibromyalgia. This additional analysis of the ABC model showed that fatigue can be described through the 4 U’s Rule, which is integrated by these four adjectives: (1) Unpredictable, (2) Uncontrollable, (3) Unseen, and (4) Unintelligible. Identifying these characteristics can contribute to a better understanding of fibromyalgia in addition to better treatment for these patients.

Description: Traumatic brain injury (TBI), a global public health concern, may lead to death and major disability. While various short-term, small-sample, and cross-sectional studies on TBI have been conducted in South Korea, there is a lack of clarity on the nationwide longitudinal TBI trends in the country. This retrospective study investigated the epidemiological TBI trends in South Korea, using a population-based dataset of the National Health Insurance (2008–2017). The crude and age adjusted TBI incidence and mortality values were calculated and stratified by age, sex, and TBI diagnosis. The age-adjusted incidence per 100,000 people increased until 2010 and showed a decreasing trend (475.8 cases in 2017) thereafter; however, a continuously decreasing age-adjusted mortality trend was observed (42.9 cases in 2008, 11.3 in 2017). The crude incidence rate increased continually in those aged 〉70 years across all the TBI diagnostic categories. The mortality per 100,000 people was significantly higher among participants aged ≥70 years than in the other age groups. We observed changing trends in the TBI incidence, with a continuously decreasing overall incidence and a rapidly increasing incidence and high mortality values in older adults. Our findings highlight the importance of active TBI prevention in elderly people.

Description: Little is known regarding the neuroanatomical correlates of patients with deficit schizophrenia or persistent negative symptoms. In this meta-analysis, we aimed to determine whether patients with deficit schizophrenia have characteristic brain abnormalities. We searched PubMed, CINAHL and Ovid to identify studies that examined the various regions of interest amongst patients with deficit schizophrenia, patients with non-deficit schizophrenia and healthy controls. A total of 24 studies met our inclusion criteria. A random-effects model was used to calculate a combination of outcome measures, and heterogeneity was assessed by the I2 statistic and Cochran’s Q statistic. Our findings suggested that there was statistically significant reduction in grey matter volume (−0.433, 95% confidence interval (CI): −0.853 to −0.014, p = 0.043) and white matter volume (−0.319, 95% CI: −0.619 to −0.018, p = 0.038) in patients with deficit schizophrenia compared to healthy controls. There is also statistically significant reduction in total brain volume (−0.212, 95% CI: −0.384 to −0.041, p = 0.015) and white matter volume (−0.283, 95% CI: −0.546 to −0.021, p = 0.034) in patients with non-deficit schizophrenia compared to healthy controls. Between patients with deficit and non-deficit schizophrenia, there were no statistically significant differences in volumetric findings across the various regions of interest.

Description: In agricultural science, the establishment of a given cropping system in mountainous areas is often understood from the relationship between differences of altitude-specific, agroecological conditions and crop cultivation characteristics. However, social factors can also play a role. We aimed to clarify how the cropping system is maintained through examining sociocultural factors, specifically land tenure and marriage systems, in an agricultural community in rural mountainous Africa. Several surveys based on participatory observation accompanied by home stays were conducted to determine people who participated in cropping systems and to understand which social system maintained the cropping system. We found that around 70% of target households in Kiboguwa village cultivated three staple crops (maize, cassava and rice) using the same cropping system and almost no farmers outside the village used the village’s sloped fields, meaning that the villagers maintained the cropping system. Households acquired nearby sloped fields by various means such as inheriting land through maternal lineage of household heads or wives. We observed virilocal and uxorilocal residence at similar degrees—and if either the husband or wife was from outside the village, that household would also have fields outside the village. However, nearly 80% of marriages were intravillage and villagers predominantly used fields located within the village limits regardless of the residence type, which helped maintain the cropping system.

Description: In this paper, 3D-printed electromagnetic (or microwave) encoders with synchronous reading based on permittivity contrast, and devoted to the measurement of displacements and velocities, are reported for the first time. The considered encoders are based on two chains of linearly shaped apertures made on a 3D-printed high-permittivity dielectric material. One such aperture chain contains the identification (ID) code, whereas the other chain provides the clock signal. Synchronous reading is necessary in order to determine the absolute position if the velocity between the encoder and the sensitive part of the reader is not constant. Such absolute position can be determined as long as the whole encoder is encoded with the so-called de Bruijn sequence. For encoder reading, a splitter/combiner structure with each branch loaded with a series gap and a slot resonator (each one tuned to a different frequency) is considered. Such a structure is able to detect the presence of the apertures when the encoder is displaced, at short distance, over the slots. Thus, by injecting two harmonic signals, conveniently tuned, at the input port of the splitter/combiner structure, two amplitude modulated (AM) signals are generated by tag motion at the output port of the sensitive part of the reader. One of the AM envelope functions provides the absolute position, whereas the other one provides the clock signal and the velocity of the encoder. These synchronous 3D-printed all-dielectric encoders based on permittivity contrast are a good alternative to microwave encoders based on metallic inclusions in those applications where low cost as well as major robustness against mechanical wearing and aging effects are the main concerns.

Description: While sustainability has attracted the attention of managers and academicians for over two decades, the macro-level indicators of sustainability are not moving in the right direction. Climate change continues to be an existential threat for humanity and other indicators of sustainability do not fare much better. The logic of the business case and the associated framing of tension between financial outcomes and sustainability have generated a limited and inadequate response to the existential challenges before humanity today. In this essay, we analyze the evolution of sustainability in the business context and call for a recognition that social and environmental outcomes must supersede economic ones in corporate sustainability thinking. We call for a widening of the spatial, temporal, and moral lenses in the formulation and execution of business strategy to ensure that it is in alignment with the needs of current and future generations of humanity and proportionate to planetary conditions.

Description: The performances of Intermediate Temperature Solid Oxide Fuel Cell (IT-SOFC) anode-supported planar cells with a 10 cm2 active surface were studied versus the combination of cathode thickness and the presence of an Anode Functional Layer (AFL). The temperature range was 500 to 650 °C, and Gd0.1Ce0.9O2−x (GDC) was used as the electrolyte material, Ni-GDC as the anode material, and La0.6Sr0.4Co0.2Fe0.8O3−d (LSCF48) as the cathode material. The power density, conductivity, and activation energy of different samples were determined in order to investigate the influence of the cathode thickness and AFL on the performance. These results showed an improvement in the performances when the AFL was not present. The maximum power density reached 370 mW·cm−2 at 650 °C for a sample with a cathode thickness of 50 µm and an electrolyte layer that was 20 µm thick. Moreover, it was highlighted that a thinner cathode layer reduced the power density of the cell.

Description: This paper presents a vulnerable road user (VRU) tracking algorithm capable of handling noisy and missing detections from heterogeneous sensors. We propose a cooperative fusion algorithm for matching and reinforcing of radar and camera detections using their proximity and positional uncertainty. The belief in the existence and position of objects is then maximized by temporal integration of fused detections by a multi-object tracker. By switching between observation models, the tracker adapts to the detection noise characteristics making it robust to individual sensor failures. The main novelty of this paper is an improved imputation sampling function for updating the state when detections are missing. The proposed function uses a likelihood without association that is conditioned on the sensor information instead of the sensor model. The benefits of the proposed solution are two-fold: firstly, particle updates become computationally tractable and secondly, the problem of imputing samples from a state which is predicted without an associated detection is bypassed. Experimental evaluation shows a significant improvement in both detection and tracking performance over multiple control algorithms. In low light situations, the cooperative fusion outperforms intermediate fusion by as much as 30%, while increases in tracking performance are most significant in complex traffic scenes.

Description: The purpose of the current study is to analyze the relationships between physical fitness, selective attention, and academic performance in pre-teens. The sample here consists of 135 participants between the ages of 10 and 12 (M = 11.05; SD = 0.61), with 39.26% female (n = 53) and 60.74% male (n = 82) participants. Horizontal and vertical jump distances, speed, and cardio-respiratory fitness were evaluated to assess physical fitness. The d2 Test of Attention was used to evaluate selective attention. In addition, data were obtained regarding participant academic performance by analyzing the academic performance. The results show significant relationships between the measures analyzed, highlighting positive associations between physical fitness, cognitive functioning, and academic performance. Thus, participants who were fitter scored better on tests of attention (Z133 = −4.07; p 〈 0.00007, Cohen’s d = 0.75, 95% CI (0.39, 1.11)) and concentration (t133 = −3.84; p 〈 0.0007, Cohen’s d = 0.69, 95% CI (0.33, 1.05)), as well as having higher academic performance (Z133 = −2.84; p 〈 0.0035, Cohen’s d = 0.39, 95% CI (0.04, 0.75)). Cardiorespiratory fitness was the measure of physical fitness that best explained these relationships. The results suggest that maintaining and improving the physical fitness of children and adolescents may help their brain function develop better.

Description: With high sensitivity and strong tolerance capability for the fault resistance, the fault component-based directional relay (FCBDR) has drawn considerable attention from industry and academia. However, the best application environment for FCBDR no longer exists when considering the large-scale connection of the doubly fed induction generator (DFIG)-based wind farms. Through a detailed analysis of the superimposed impedance of DFIG, this paper reveals that the performances of FCBDRs may be shown negatively impacted by the fault behaviors of DFIG when the crowbar protection inputs. In addition, this paper proposes a mitigation countermeasure to deal with those issues. The proposed countermeasure takes advantage of the different superimposed impedance features of DFIG compared with that of the synchronous generator (SG) to enhance the adaptability of the conventional FCBDRs. Extensive simulation results show that the proposed countermeasure can differentiate the fault direction clearly under different fault conditions.

Description: Failures of marine propulsion components or systems can lead to serious consequences for a vessel, cargo and the people onboard a ship. These consequences can be financial losses, delay in delivery time or a threat to safety of the people onboard. This is why it is necessary to learn about marine propulsion failures in order to prevent worst-case scenarios. This paper aims to provide a review of experimental, analytical and numerical methods used in the failure analysis of ship propulsion systems. In order to achieve that, the main causes and failure mechanisms are described and summarized. Commonly used experimental, numerical and analytical tools for failure analysis are given. Most indicative case studies of ship failures describe where the origin of failure lies in the ship propulsion failures (i.e., shaft lines, crankshaft, bearings, foundations). In order to learn from such failures, a holistic engineering approach is inevitable. This paper tries to give suggestions to improve existing design procedures with a goal of producing more reliable propulsion systems and taking care of operational conditions.

Description: East Asia is the most complex region in the world for aerosol studies, as it encounters a lot of varieties of aerosols, and aerosol classification can be a challenge in this region. In the present study, we focused on the relationship between aerosol types and aerosol optical properties. We analyzed the long-term (2005–2012) data of vertical profiles of aerosol extinction coefficients, lidar ratio (Sp), and other aerosol optical properties obtained from a NASA Micro-Pulse Lidar Network and Aerosol Robotic Network site in northern Taiwan, which frequently receives Asian continental outflows. Based on aerosol extinction vertical profiles, the profiles were classified into two types: type 1 (single-layer structure) and type 2 (two-layer structure). Fall season (October–November) was the prevailing season for the Type 1, whereas type 2 mainly happened in spring (March–April). In type 1, air masses normally originated from three regional sectors, i.e., Asia continental (AC), Pacific Ocean (PO), and Southeast Asia (SA). The mean Sp values were 39 ± 17 sr, 30 ± 12 sr, and 38 ± 18 sr for the AC, PO, and SA sectors, respectively. The Sp results suggested that aerosols from the AC sector contained dust and anthropogenic particles, and aerosols from the PO sector were most likely sea salts. We further combined the EPA dust event database and backward trajectory analysis for type 2. Results showed that Sp was 41 ± 14 sr and 53 ± 21 sr for dust storm and biomass-burning events, respectively. The Sp for biomass-burning events in type 2 showed two peaks patterns. The first peak occurred within range of 30–50 sr corresponding to urban pollutant, and the second peak occurred within range of 60–80 sr in relation to biomass burning. Finally, our study summarized the Sp values for four major aerosol types over northern Taiwan, viz., urban (42 ± 18 sr), dust (34 ± 6 sr), biomass-burning (69 ± 12 sr), and oceanic (30 ± 12 sr). Our findings provide useful references for aerosol classification and air pollution identification over the western North Pacific.

Description: Many game-based instructional designs have demonstrated effectiveness for a variety of educational outcomes, although typically in limited contexts. In this article, we report the results of a four-year study testing the extent to which a game-based learning approach to undergraduate engineering education demonstrating promising results in a university course was transportable to other engineering courses and universities. We evaluated students’ conceptual understanding, emotional engagement (with the Experience Sampling Method), and experience when using the video game, Spumone, for their coursework compared to a textbook-based control condition. Multilevel models and other quantitative analyses showed that the effect of the experimental condition (i.e., game-based) on conceptual understanding and student engagement was not significant. Based on a content analysis of students’ feedback, however, the students reported a positive experience with game-based learning for their assignments overall. Areas of need towards successful implementation of the game-based learning intervention were also examined. This study has important implications for the salience of implementation issues including adequate training and continuing teacher professional development, and ongoing supports for instructors and students to aid in the learning of concepts that the game was intended to teach.

Description: Urbanization is a complex process closely involving the economy, society, and population. While monitoring urban development and exploring the industry-driving force in a real-time and effective way are the prerequisites for optimizing industry structure, narrowing the urban development gap, and achieving sustainable development. Nighttime light is an effective tool to monitor urban development from a macro perspective. However, the systematic research of nighttime light spatiotemporal variation modes and the industry-driving force of urban nighttime light are still unknown. Considering these issues, this paper analyzes the spatiotemporal variation modes of the average light index (ALI) and investigates the industry-driving force of ALI in 100 major prefecture-level cities across China mainland based on National Polar-Orbiting Partnership Satellite Visible Infrared Imaging Radiometer Suite (NPP VIIRS). The conclusions are as following three aspects. First, ALI is observed a funnel pattern among four regions in spatial dimension, with low in center and high in the surrounding, and it shows 5 variation modes (“W,” “√,” “Exponent,” “Logarithm,” and “N”) in temporal dimension, of which the “√” mode accounts for the highest proportion (60%). Second, the industry structure is closely related to ALI. Besides, the factor analysis result illustrates that the secondary and tertiary industry are the driving industries of ALI. Third, the classification result based on the industry contribution rate indicates that cities driven by different industries show significant spatial distribution differences. The three major industry-driving cities are mainly distributed in central and western regions, the secondary and tertiary industry-driving cities are evenly distributed, and the tertiary industry-driving cities are mainly distributed in provincial capitals. From 2013 to 2018, the fluctuation of city distribution driven by different industries changes obviously. The number of tertiary industry-driving cities increases steadily and the three major industry-driving cities are distributed wider spatially. Additionally, the impacts of location and raw coal on ALI are discussed. In general, these findings are essential to further research urban development mode and can be considered as the reference to narrow urban development gap.

Description: Flat surfaces captured by 3D point clouds are often used for localization, mapping, and modeling. Dense point cloud processing has high computation and memory costs making low-dimensional representations of flat surfaces such as polygons desirable. We present Polylidar3D, a non-convex polygon extraction algorithm which takes as input unorganized 3D point clouds (e.g., LiDAR data), organized point clouds (e.g., range images), or user-provided meshes. Non-convex polygons represent flat surfaces in an environment with interior cutouts representing obstacles or holes. The Polylidar3D front-end transforms input data into a half-edge triangular mesh. This representation provides a common level of abstraction for subsequent back-end processing. The Polylidar3D back-end is composed of four core algorithms: mesh smoothing, dominant plane normal estimation, planar segment extraction, and finally polygon extraction. Polylidar3D is shown to be quite fast, making use of CPU multi-threading and GPU acceleration when available. We demonstrate Polylidar3D’s versatility and speed with real-world datasets including aerial LiDAR point clouds for rooftop mapping, autonomous driving LiDAR point clouds for road surface detection, and RGBD cameras for indoor floor/wall detection. We also evaluate Polylidar3D on a challenging planar segmentation benchmark dataset. Results consistently show excellent speed and accuracy.

Description: A low-mass and low-volume dual-polarization L-band radiometer is introduced that has applications for ground-based remote sensing or unmanned aerial vehicle (UAV)-based mapping. With prominent use aboard the ESA Soil Moisture and Ocean Salinity (SMOS) and NASA Soil Moisture Active Passive (SMAP) satellites, L-band radiometry can be used to retrieve environmental parameters, including soil moisture, sea surface salinity, snow liquid water content, snow density, vegetation optical depth, etc. The design and testing of the air-gapped patch array antenna is introduced and is shown to provide a 3-dB full power beamwidth of 37°. We present the radio-frequency (RF) front end design, which uses direct detection architecture and a square-law power detector. Calibration is performed using two internal references, including a matched resistive source (RS) at ambient temperature and an active cold source (ACS). The radio-frequency (RF) front end does not require temperature stabilization, due to characterization of the ACS noise temperature by sky measurements. The ACS characterization procedure is presented. The noise equivalent delta (Δ) temperature (NEΔT) of the radiometer is ~0.14 K at 1 s integration time. The total antenna temperature uncertainty ranges from 0.6 to 1.5 K.

Description: Finding the correct pricing strategy for a product with multiple versions is an issue for retailers from various industries. In this paper, joint pricing and ordering problem is considered for a product that has two versions at each selling period. Two models, namely with or without the donation option, are analyzed and optimality conditions and monotonicity properties of the decision variables are characterized. When demands of products depend on prices of both versions, donating part of old product inventory would be more profitable for the retailer. Moreover, the donation model would result in less wasted inventory, contributing to sustainability and goals of green economy. Analytical results are supported with numerical analysis of a realistic case.

Description: In this study, the environmental impacts of various alternative ship fuels for a coastal ferry were assessed by the life cycle assessment (LCA) analysis. The comparative study was performed with marine gas oil (MGO), natural gas, and hydrogen with various energy sources for a 12,000 gross tonne (GT) coastal ferry operating in the Republic of Korea (ROK). Considering the energy imports of ROK, i.e., MGO from Saudi Arabia and natural gas from Qatar, these countries were chosen to provide the MGO and the natural gas for the LCA. The hydrogen is considered to be produced by steam methane reforming (SMR) from natural gas with hard coal, nuclear energy, renewable energy, and electricity in the ROK model. The lifecycles of the fuels were analyzed in classifications of Well-to- Tank, Tank-to-Wake, and Well-to-Wake phases. The environmental impacts were provided in terms of global warming potential (GWP), acidification potential (AP), photochemical potential (POCP), eutrophication potential (EP), and particulate matter (PM). The results showed that MGO and natural gas cannot be used for ships to meet the International Maritime Organization’s (IMO) 2050 GHG regulation. Moreover, it was pointed out that the energy sources in SMR are important contributing factors to emission levels. The paper concludes with suggestions for a hydrogen application plan for ships from small, nearshore ships in order to truly achieve a ship with zero emissions based on the results of this study.

Description: In this paper, the lattice Boltzmann pseudo-potential model coupled the Carnahan–Starling (C-S) equation of state and Li’s force scheme are used to study the collapse process of cavitation bubbles near the concave wall. It mainly includes the collapse process of the single and double cavitation bubbles in the near-wall region. Studies have shown that the collapse velocity of a single cavitation bubble becomes slower as the additional pressure reduces, and the velocity of the micro-jet also decreases accordingly. Moreover, the second collapse of the cavitation bubble cannot be found if the additional pressure reduces further. When the cavitation bubble is located in different angles with vertical direction, its collapse direction is always perpendicular to the wall. If the double cavitation bubbles are arranged vertically, the collapse process of the upper bubble will be quicker, as the relative distance increases. When the relative distance between the bubbles is large enough, no second collapse can be found for the upper bubble. On the other hand, when two cavitation bubbles are in the horizontal arrangement, the suppression effect between cavitation bubbles decreases as the relative distance between the bubbles increases and the collapse position of cavitation bubbles moves from the lower part to the upper part.

Description: In this study, we proposed a semi-automated and interactive scheme for organ contouring in radiotherapy planning for patients with non-small cell lung cancers. Several organs were contoured, including the lungs, airway, heart, spinal cord, body, and gross tumor volume (GTV). We proposed some schemes to automatically generate and vanish the seeds of the random walks (RW) algorithm. We considered 25 lung cancer patients, whose computed tomography (CT) images were obtained from the China Medical University Hospital (CMUH) in Taichung, Taiwan. The manual contours made by clinical oncologists were taken as the gold standard for comparison to evaluate the performance of our proposed method. The Dice coefficient between two contours of the same organ was computed to evaluate the similarity. The average Dice coefficients for the lungs, airway, heart, spinal cord, and body and GTV segmentation were 0.92, 0.84, 0.83, 0.73, 0.85 and 0.66, respectively. The computation time was between 2 to 4 min for a whole CT sequence segmentation. The results showed that our method has the potential to assist oncologists in the process of radiotherapy treatment in the CMUH, and hopefully in other hospitals as well, by saving a tremendous amount of time in contouring.

Description: We compared the catalytic effects of two polymers (soluble starch and apple pectin) on the flocculation of kaolinite suspension. Moreover, the relationship between the zeta potential value and the time when kaolin particle sedimentation occurred was verified, and the mechanism of flocculation was analyzed. Additionally, a constitutive model was proposed to simulate the non-ideal sedimentation of clay particles in an aqueous system under constant gravity. This model not only considers the inhomogeneity of the solute but also simulates the change in clay concentration with time during the deposition process. This model proposes a decay constant (α) and sedimentation coefficient (s). The model can also be used to calculate the instantaneous sedimentation rate of the clay suspensions at any time and any depth for the settling cylinder. These sedimentary characteristics were simulated by adopting the established deposition model. The results show that the model is capable of predicting the time required for the complete sedimentation of particles in the aqueous system, suggesting the feasibility of engineering wastewater treatment, site dredging, etc.

Description: An essential aspect in the interaction between people and computers is the recognition of facial expressions. A key issue in this process is to select relevant features to classify facial expressions accurately. This study examines the selection of optimal geometric features to classify six basic facial expressions: happiness, sadness, surprise, fear, anger, and disgust. Inspired by the Facial Action Coding System (FACS) and the Moving Picture Experts Group 4th standard (MPEG-4), an initial set of 89 features was proposed. These features are normalized distances and angles in 2D and 3D computed from 22 facial landmarks. To select a minimum set of features with the maximum classification accuracy, two selection methods and four classifiers were tested. The first selection method, principal component analysis (PCA), obtained 39 features. The second selection method, a genetic algorithm (GA), obtained 47 features. The experiments ran on the Bosphorus and UIVBFED data sets with 86.62% and 93.92% median accuracy, respectively. Our main finding is that the reduced feature set obtained by the GA is the smallest in comparison with other methods of comparable accuracy. This has implications in reducing the time of recognition.

Description: Avalanche disasters are extremely destructive and catastrophic, often causing serious casualties, economic losses and surface erosion. However, far too little attention has been paid to utilizing remote sensing mapping avalanches quickly and automatically to mitigate calamity. Such endeavors are limited by formidable natural conditions, human subjective judgement and insufficient understanding of avalanches, so they have been incomplete and inaccurate. This paper presents an objective and widely serviceable method for regional auto-detection using the scattering and interference characteristics of avalanches extracted from Sentinel-1 SLC images. Six indices are established to distinguish avalanches from surrounding undisturbed snow. The active avalanche belts in Kizilkeya and Aktep of the Western TianShan Mountains in China lend urgency to this research. Implementation found that smaller avalanches can be consistently identified more accurately in descending images. Specifically, 281 and 311 avalanches were detected in the ascending and descending of Kizilkeya, respectively. The corresponding numbers on Aktep are 104 and 114, respectively. The resolution area of single avalanche detection can reach 0.09 km2. The performance of the model was excellent in all cases (areas under the curve are 0.831 and 0.940 in descending and ascending of Kizilkeya, respectively; and 0.807 and 0.938 of Aktep, respectively). Overall, the evaluation of statistical indices are POD 〉 0.75, FAR 〈 0.34, FOM 〈 0.13 and TSS 〉 0.75. The results indicate that the performance of the innovation proposed in this paper, which employs multivariate comprehensive descriptions of avalanche characteristics to actualize regional automatic detection, can be more objective, accurate, applicable and robust to a certain extent. The latest and more complete avalanche inventory generated by this design can effectively assist in addressing the increasingly severe avalanche disasters and improving public awareness of avalanches in alpine areas.

Description: Product-service systems (PSS) are often presented as an inherently sustainable business model. The argumentation is often based on theoretical considerations, which cite circular economy (CE) characteristics in PSS business models as an explanation. In this paper we examined to what extent positive and negative sustainability effects of PSS could actually be observed, based on use cases. For this purpose, we conducted a systematic literature review and analyzed the statements on sustainability effects based on the triple bottom line approach. We find that positive sustainability effects, especially on the environmental sustainability of PSS, are described disproportionately often, which may be indicating a possible publication bias. In addition, the methods used to derive statements on sustainability effects are very heterogeneous and often unsystematic, making it difficult to compare the described effects. Furthermore, we were able to identify drivers that are particularly often considered in literature to be responsible for sustainability effects. As a result, we were able to derive direct implications for future research in the field of sustainability assessment of PSS.

Description: The current studies on carbon dioxide (CO2) emissions and the impacts on public health focus mainly on evaluating CO2 emissions from two types of emission sources. The first is a fixed source type from industrial plants, which can be controlled or easily evaluated. The second is a mobile source type from the transport sector, especially from medium- and heavy-duty vehicles (MHDVs), which produce high emissions. However, the common methods of evaluation of the average value of CO2 emissions per kilometer of a vehicle use a general Intergovernmental Panel on Climate Change (IPCC) model that does not consider the topography or road conditions. This affects the accuracy of CO2 emission assessments and, in turn, affects the accuracy of any analysis needed to establish health policies and the management of public health within the affected area. In this paper, therefore, we present the development of emission coefficient calculations with varying topography conditions for MHDVs with consideration of the health effects on the populace. The study area was the Asian highway network in Thailand that passes through all regions and is geographically diverse. Data were collected from the Department of Highway’s records, global positioning system (GPS) and electronic control unit (ECU) with data consisting of road data, slope, distance, traffic level and vehicle weight, as well as fuel consumption along the transportation route. To analyze and map out the correlation of the CO2 emission coefficients for each road slope, we determined the coefficient of the CO2 emissions using multiple linear regression analysis and validated this using Huber–White robust standard errors for heteroscedasticity. This method was more cost-efficient and time-efficient compared to the conventional approaches. We also created CO2 emission maps with risk points for health effects, and we propose policy designs and plans to manage the traffic level in each of these areas prone to higher levels of such emissions.

Description: Automated tracking of physical fitness has sparked a health revolution by allowing individuals to track their own physical activity and health in real time. This concept is beginning to be applied to tracking of cognitive load. It is well known that activity in the brain can be measured through changes in the body’s physiology, but current real-time measures tend to be unimodal and invasive. We therefore propose the concept of a wearable educational fitness (EduFit) tracker. We use machine learning with physiological data to understand how to develop a wearable device that tracks cognitive load accurately in real time. In an initial study, we found that body temperature, skin conductance, and heart rate were able to distinguish between (i) a problem solving activity (high cognitive load), (ii) a leisure activity (moderate cognitive load), and (iii) daydreaming (low cognitive load) with high accuracy in the test dataset. In a second study, we found that these physiological features can be used to predict accurately user-reported mental focus in the test dataset, even when relatively small numbers of training data were used. We explain how these findings inform the development and implementation of a wearable device for temporal tracking and logging a user’s learning activities and cognitive load.

Description: The Sassi, a UNESCO World Heritage Site and its rupestrian churches, are richly decorated and visited by thousands of visitors every year. It is important to preserve this heritage which shows signs of deterioration due to abiotic and/or biotic factors. Aiming to carry out in the future an environmental-friendly restoration, a screening of the fungi present on walls and frescoes of two rupestrian churches “Santa Lucia alle Malve” and “La Madonna dei derelitti” located, respectively, in the “Sasso Caveoso” and in the “Sasso Barisano” was performed. Isolation and characterization of fungal species from investigated sites was carried out. Total genomic DNA (gDNA) was extracted from pure fungal cultures and subsequently utilized in PCRs using primers that amplify a portion of the ribosomal DNA (ITS5/ITS4) or the β-tubulin gene (Bt2a/Bt2b). The amplicons were directly sequenced. Obtained nucleotide sequences were compared to those present in the GenBank (NCBI) showing a very high similarity (99–100%) with the following species: Parengyodontium album, Alternaria alternata, Cladosporium cladosporioides, Lecanicillium psalliotae, Meyerozyma guilliermondii and Botryotrichum atrogriseum. All sequences from this study were deposited in the EMBL database. Detailed knowledge about fungi isolated from stone is indispensable not only to counter/reduce the structural and aesthetic damage but also to protect the health of both guardians and visitors who may develop different pathologies due to the spores diffused in the environment.

Description: The main purpose of the article was to identify and present the current situation and changes in higher education in the field of electricity and energy studies in the European Union countries. The specific objectives include determining the degree of concentration of education in the fields of electricity and energy in the EU countries, showing the directions of their changes, types of dominant education in this field, establishing the correlation between education in the fields of electricity and energy and the parameters assessing the achievement of circular economy assumptions in the energy sector. All Member States of the European Union were deliberately selected for research. The research period covered the years 2013–2018. The source of the materials is a literature review on the subject and Eurostat data. For the analysis and presentation of materials, methods such as descriptive, tabular, graphical, dynamics indicators with a constant basis, Gini concentration coefficient, concentration analysis using the Lorenz curve, coefficient of variation, Pearson’s linear correlation coefficient were used. A high concentration of education in the fields of electricity and energy was found in several EU countries, the largest in countries with the highest energy consumption, i.e., in France and Poland. Changes in the level of concentration practically did not take place, only in the case of master’s studies, there was an increase in concentration. However, the EU countries did not differ significantly in terms of the structure of the number of students studying electricity and energy.

Description: Combinatorial analysis of key petrophysical parameters can provide valuable information about subsurface hydrocarbon reservoirs. This is particularly important for reservoirs with unconventional rock formations that, due to the low permeability, need to be stimulated by fracturing treatment to provide fluid flow to the exploitation wellbore. In this article, based on data from unconventional shale formations (N Poland), we outline how independent sets of elastic and petrophysical parameters and other reservoir features can be co-analyzed to estimate the fracture susceptibility of shale intervals, which are characterized by a high total organic carbon (TOC) content and high porosity. These features were determined by analysis of each horizon’s elastic and mineralogical brittleness index (BI). These two variants were calculated first in 1D; integrated with the seismic data and finally compared with other parameters such as acoustic impedance, ratio of compressional and shear wave velocities, porosity, and density; and then presented and analyzed using cross plots that highlighted the key relationships between them. The overall BI trends were similar in both horizontal and vertical directions. The highest BI values were observed in the southeast of the analyzed area (Source I) and in the southeast and northwest of the area (Source II). These results can form the basis for predictive modeling of reservoir properties aiding effective reservoir exploration.

Description: Reliability is an important index which determines the power service and quality provided to customers. As the demand increases continuously and the system changes in accordance with the environmental regulation, the reliability assessment in the distribution system becomes crucial. In this paper, we propose methods for improving the reliability of the distribution system using electric vehicles (EVs) in the system. In this paper, EVs are used as power supplying devices, such as a transportable energy storage system (ESS) which supplies power when fault occurs in the system, and by using a time–space network (TSN) in particular, EV capacity in accordance with the load arrival time was calculated. Unlike other existing reliability assessments, we did not use the average load of customers. Instead, by taking into account the load pattern by times, we considered the priority for load supply in accordance with the failure scenarios and failure times. Based on the priority calculated for each time of failure and failure scenario, plans for EV operation to minimize expected customer interruption cost (ECOST), the reliability index in the distribution system, were established. Finally, a case study was performed using the IEEE RBTS (Roy Billinton Test System) 2 Bus and the performance of the model proposed in this paper was verified based on the result.

Description: Natural and synthetic esters are liquids characterized by insulating properties, high flash point, and biodegradability. For this reason, they are more and more often used as an alternative to conventional mineral oils. Esters are used to fill new or operating transformers previously filled with mineral oil (retrofilling). It is technically unfeasible to completely remove mineral oil from a transformer. Its small residues create with esters a mixture with features significantly different from those of the base liquids. This article presents electrostatic charging tendency (ECT) tests for mixtures of fresh and aged Trafo EN mineral oil with Envirotemp FR3 natural ester from the retrofilling point of view. Under unfavorable conditions, the flow electrification phenomenon can damage the solid insulation in transformers with forced oil circulation. The ECT of the insulating liquids has been specified using the volume density of the qw charge. This parameter has been determined using the Abedian–Sonin model on the basis of the electrification current measured in the flow system, as well as selected physicochemical properties of the liquids. It was shown that ECT is strongly dependent on the type of insulating liquid and pipe material, as well as the composition of the mixtures. The most important finding from the research is that a small amount (up to 10%) of fresh and aged mineral oil is effective in reducing the ECT of Envirotemp FR3 natural ester.

Description: Greenhouse gases such as carbon dioxide and methane cause global warming and consequently climate change. Great efforts are being made to reduce greenhouse gas emissions with the objective of addressing this problem, hence the popularity of technologies conductive to reducing greenhouse gas emissions. CO2 emissions can be reduced by improving the thermal efficiency of combustion engines, for example, by using cogeneration systems. Coal mine methane (CMM) emerges due to mining activities as methane released from the coal and surrounding rock strata. The amount of methane produced is primarily influenced by the productivity of the coal mine and the gassiness of the coal seam. The gassiness of the formation around the coal seam and geological conditions are also important. Methane can be extracted to the surface using methane drainage installations and along with ventilation air. The large amounts of methane captured by methane drainage installations can be used for energy production. This article presents a quarterly summary of the hourly values of methane capture, its concentration in the methane–air mixture, and electricity production in the cogeneration system for electricity and heat production. On this basis, neural network models have been proposed in order to predict electricity production based on known values of methane capture, its concentration, pressure, and parameters determining the time and day of the week. A prediction model has been established on the basis of a multilayer perceptron network (MLP).

Description: The research aim of this paper was two-fold: to generate evidence that personality factors are linear predictors of the variable approaches to learning (a relevant cognitive-motivational variable of Educational Psychology); and to show that each type of learning approach differentially predicts positive or negative achievement emotions, in three learning situations: class time, study time, and testing. A total of 658 university students voluntarily completed validated questionnaires referring to these three variables. Using an ex post facto design, we conducted correlational analyses, regression analyses, and multiple structural predictions. The results showed that Conscientiousness is associated with and predicts a Deep Approach to learning, while also predicting positive achievement emotions. By contrast, Neuroticism is associated with and significantly predicts a Surface Approach to learning, as well as negative achievement emotions. There are important psychoeducational implications in the university context, both for prevention and for self-improvement, and for programs that offer psychoeducational guidance.

Description: In order to control manufacturing systems, managers need risk and performance evaluation methods and simulation tools. However, these simulation techniques must evolve towards being multiperformance, multiactor, and multisimulation tools, and this requires interoperability between those distributed components. This paper presents an integrated platform that brings interoperability to several simulation components. This work expands the process modeling tool Papyrus to allow it to communicate with external components through both distributed simulation and cosimulation standards. The distributed modeling and simulation framework (DMSF) platform takes its environment into consideration in order to evaluate the sustainability of the system while integrating external heterogeneous components. For instance, a DMSF connection with external IoT devices has been implemented. Moreover, the orchestration of different smart manufacturing components and services is achieved through configurable business models. As a result, an automotive industry case study has successfully been tested to demonstrate the sustainability of smart supply chains and manufacturing factories, allowing better connectivity with their real environments.

Description: This paper assessed the impact of soil and water conservation practices on farm productivity and risk exposure using data from 1204 plots in the semiarid tropics of India. A probit model was used to assess the determinants of adoption of soil bunds. We employed a moment-based approach for estimating crop revenue, its variability and downside risk exposure, i.e., crop failure. Furthermore, we also used a doubly robust method for assessing the impact of soil bunds on crop revenue, its variability and downside risk. Matching and propensity-based methods were also used to check robustness. The results show that training, access to credit and extension services are key determinants of adoption of soil bunds. Furthermore, the results also suggest that soil bunds not only improve the crop revenue but also reduce its variability. Most interestingly, we show that soil bunds also reduce the chances of downside risk, i.e., crop failure. Therefore, in view of increasing climate change and variability in the semiarid tropics, it can be suggested that soil bunds could be an important adaptation strategy for improving productivity and reducing risk exposure. This paper supports the investment in soil and water conservation technologies for sustaining the livelihood of resource-poor farmers of ecologically fragile regions such as the semiarid tropics.

Description: This study examines who are the social actors in coordinating the environmental hot spots along the process of desalination. The integrated model design of life cycle modeling and Social Network Analysis is evaluated holistically by the inventory of life cycle and actor engagement ratings. Instances of the first small-scale reverse osmosis desalination plant project in Kelantan, Malaysia were used to meet the demands of this study. Environmental performance is measured through the Eco-Indicator 99 method in the Life Cycle Assessment Principles. Meanwhile, the network analysis of the actors’ networks involves stakeholders visualized through the UCINET software. The results show three hotspot points of membrane and brine disposal, the use of electrical energy, and the use of chemicals. The results acknowledged that 87 percent of the actors’ involvement from the dominant stakeholder group has been in control of the management and of the aforementioned hotspot. Undoubtedly, the results of this study can provide a better understanding of the potential market of actors to work with a more accurate and polycentric information flow for the development of more established desalination systems. This intriguing research will require further exploration in future studies.

Description: An extremely heavy rainfall event hit Guangdong province, China, from 27 August to 1 September 2018. There were two different extreme rain regions, respectively, at the Pearl River estuary and eastern Guangdong, and a record-breaking daily precipitation of 1056.7 mm was observed at Gaotan station on 30 August. This paper utilizes a suite of observations from soundings, a gauge network, disdrometers, and polarimetric radars to gain insights to the two rainfall centers. The large-scale meteorological forcing, rainfall patterns, and microphysical processes, as well as radar-based precipitation signatures are investigated. It is concluded that a west-moving monsoon depression played a critical role in sustaining the moisture supply to the two extreme rain regions, and the combined orographic enhancement further contributed to the torrential rainfall over Gaotan station. The raindrop size distributions (DSD) observed at Zhuhai and Huidong stations, as well as the observed polarimetric radar signatures indicate that the rainfall at Doumen region was characterized by larger raindrops but a lower number concentration compared with that at Gaotan region. In addition, the dual-polarization radars are used to quantify precipitation intensity during this extreme event, providing timely information for flood warning and emergency management decision-making.

Description: In this contribution, we explore the possibilities of Responsible Innovation (RI) to assess and support the engagement of businesses in the spectrum of Social and Solidarity Economy (SSE) and, in particular, cooperatives to the implementation of Sustainable Development Goals (SDGs) at the firm level. We conduct a critical review of the academic literature on sustainable development and responsible innovation, focusing on the role of business to identify how firms in the spectrum of SSE can contribute through responsible innovation to the sustainable development agenda and how firms in the spectrum of SSE can benefit from it. Results suggest that firms can benefit from responsible innovation in the transformation of their business models. On the other hand, firms in the spectrum of SSE contribute to extending the scope of SDGs to business, not focusing on what cooperatives do by their nature (e.g., principles and values), but their contribution to key horizontal enablers (e.g., partnership and innovation) for the integration of firms in the sustainable development agenda. To our knowledge, this is the first time that the relationship between SSE firms and RI is assessed from the perspective of firms’ contribution to SDGs. Further research is needed to sophisticate the translation of particular tools developed in the framework of RI to firms in the spectrum of SSE and, in particular, cooperative firms.

Description: The traditional analysis of road safety is based on statistical methods that are applied to crash databases to understand the significance of geometrical and traffic features on safety, or in order to localize black spots. These classic methodologies, which are based on real crash data and have a solid background, usually do not explicitly consider the trajectories of vehicles at any given location. Moreover, they are not easily applicable for making comparisons between different traffic network designs. Surrogate safety measures, instead, may enable researchers and practitioners to overcome these limitations. Unfortunately, the most commonly used surrogate safety measures also present certain limits: Many of them do not take into account the severity of a potential collision and the dangers posed by road-side objects and/or the possibility of drivers being involved in a single-vehicle crash. This paper proposes a new surrogate safety indicator founded on vehicle trajectories, capable also of considering road-side objects. The validity of the proposed indicator is assessed by means of comparison between the calculation of surrogate safety measures on micro-simulated trajectories and the real crash risk obtained with data on real crashes observed at several urban intersection scenarios. The proposed experimental framework is also applied (for comparison) to classical indicators such as TTC (time to collision) and PET (post-encroachment time).

Description: Dense β-SiC coating with 3C-structure was utilized as a dry cold forging punch and core-die. Pure titanium T328H wires of industrial grade II were employed as a work material. No adhesion or galling of metallic titanium was detected on the contact interface between this β-SiC die and titanium work, even after this continuous forging process, up to a reduction in thickness by 70%. SEM (Scanning Electron Microscopy) and EDX (Electron Dispersive X-ray spectroscopy) were utilized to analyze this contact interface. A very thin titanium oxide layer was in situ formed in the radial direction from the center of the contact interface. Isolated carbon from β-SiC agglomerated and distributed in dots at the center of the initial contact interface. Raman spectroscopy was utilized, yielding the discovery that this carbon is unbound as a free carbon or not bound in SiC or TiC and that intermediate titanium oxides are formed with TiO2 as a tribofilm.

Description: Understanding socio-ecological interactions requires an interdisciplinary approach that recognizes the value of both a social and an ecological perspective. However, such a recognition does not yet automatically result in an integral approach. Many studies of socio-ecological transformations start from either social science or a natural science perspective, and take results from other academic disciplines merely as a given, thus treating these disciplines as black boxes. In this editorial we argue that socio-ecology requires a new paradigm that not only seeks to transcend the separation between social sciences and ecological sciences but also develops a more intimate relationship between these different academic disciplines. We argue that studying socio-ecological interactions is not merely the sum total of social scientific and ecological research, because socio-ecological interactions are not interactions between sociological and ecological systems, but interactions that take place within the socio-ecological whole. Therefore, the study of socio-ecological interactions should start with a new ontology, in which social and ecological aspects are considered different aspects of one and the same reality. The papers in this special issue all show aspects of socio-ecological interactions, but also illustrate the challenge of studying socio-ecological interactions in a comprehensive way.

Description: Earth remote sensing optical satellite systems are often divided into two categories—geosynchronous and sun-synchronous. Geosynchronous systems essentially rotate with the Earth and continuously observe the same region of the Earth. Sun-synchronous systems are generally in a polar orbit and view differing regions of the Earth at the same local time. Although similar in instrument design, there are enough differences in these two types of missions that often the calibration of the instruments can be substantially different. Thus, respective calibration teams develop independent methods and do not interact regularly or often. Yet, there are numerous areas of overlap and much to learn from one another. To address this issue, a panel of experts from both types of systems was convened to discover common areas of concern, areas where improvements can be made, and recommendations for the future. As a result of the panelist’s efforts, a set of eight recommendations were developed. Those that are related to improvements of current technologies include maintaining sun-synchronous orbits (not allowing orbital decay), standardization of spectral bandpasses, and expanded use of well-developed calibration techniques such as deep convective clouds, pseudo invariant calibration sites, and lunar methodologies. New techniques for expanded calibration capability include using geosynchronous instruments as transfer radiometers, continued development of ground-based prelaunch calibration technologies, expansion of RadCalNet, and development of space-based calibration radiometer systems.

Description: Petroleum hydrocarbons, notably diesel oil, are the main energy source for running amenities in the Antarctic region and are the major cause of pollution in this area. Diesel oil spills are one of the major challenges facing management of the Antarctic environment. Bioremediation using bacteria can be an effective and eco-friendly approach for their remediation. However, since the introduction of non-native organisms, including microorganisms, into the Antarctic or between the distinct biogeographical regions within the continent is not permitted under the Antarctic Treaty, it is crucial to discover native oil-degrading, psychrotolerant microorganisms that can be used in diesel bioremediation. The primary aim of the current study is to optimize the conditions for growth and diesel degradation activity of an Antarctic local bacterium, Arthrobacter sp. strain AQ5-05, using the Plackett-Burman approach and response surface method (RSM) via a central composite design (CCD) approach. Based on this approach, temperature, pH, and salinity were calculated to be optimum at 16.30 °C, pH 7.67 and 1.12% (w/v), respectively. A second order polynomial regression model very accurately represented the experimental figures’ interpretation. These optimized environmental conditions increased diesel degradation from 34.5% (at 10 °C, pH 7.00 and 1.00% (w/v) salinity) to 56.4%. Further investigation of the kinetics of diesel reduction by strain AQ5-05 revealed that the Teissier model had the lowest RMSE and AICC values. The calculated values for the Teissier constants of maximal growth rate, half-saturation rate constant for the maximal growth, and half inhibition constants (μmax, Ks, and Ki), were 0.999 h−1, 1.971% (v/v) and 1.764% (v/v), respectively. The data obtained therefore confirmed the potential application of this cold-tolerant strain in the bioremediation of diesel-contaminated Antarctic soils at low temperature.

Description: The consequences of climate change can involve various ambits and be very severe. For this reason, the social perception of climate change is a fundamental issue since it can influence the decisions of the policymakers, by encouraging or discouraging political, economic and social actions. In this paper, a sample of 300 interviews, collected through a standardized questionnaire and carried out among two municipalities located in southern Italy, was exploited to investigate the perception of climate change. Specific issues, regarding perceptions about climate change, concerns about its impacts, level of information, behavior and actions, exposure to extreme natural events and trust, were addressed to give answers to the research questions: (i) Is climate change perceived by the population? (ii) What is the degree of the community resilience to extreme natural events and climate change? As the main findings, this survey highlighted that the spatio-temporal dimension affects population perception, suggesting that some issues, such as correct behavior towards the geosphere, the sustainability of anthropization processes, community resilience and disaster risk reduction policies, can be very central and useful to mitigate the effects of climate change in population and society. Moreover, climate change perception varies in relation to contextual factors, including media communication, socio-demographic characteristics of respondents, knowledge and education, economic and institutional factors, personal values and, finally, psychological factors and experience.

Description: The manufacturing of parts from nickel-based superalloy Alloy 247LC by laser powder bed fusion (L-PBF) is challenging, primarily owing to the alloy’s susceptibility to cracks. Apart from the cracks, voids created during the L-PBF process should also be minimized to produce dense parts. In this study, samples of Alloy 247LC were manufactured by L-PBF, several of which could be produced with voids and crack density close to zero. A statistical design of experiments was used to evaluate the influence of the process parameters, namely laser power, scanning speed, and hatch distance (inherent to the volumetric energy density) on void formation, crack density, and microhardness of the samples. The window of process parameters, in which minimum voids and/or cracks were present, was predicted. It was shown that the void content increased steeply at a volumetric energy density threshold below 81 J/mm3. The crack density, on the other hand, increased steeply at a volumetric energy density threshold above 163 J/mm3. The microhardness displayed a relatively low value in three samples which displayed the lowest volumetric energy density and highest void content. It was also observed that two samples, which displayed the highest volumetric energy density and crack density, demonstrated a relatively high microhardness; which could be a vital evidence in future investigations to determine the fundamental mechanism of cracking. The laser power was concluded to be the strongest and statistically most significant process parameter that influenced void formation and microhardness. The interaction of laser power and hatch distance was the strongest and most significant factor that influenced the crack density.

Description: : The main purpose of this work is to study the effectiveness of using FeCeOx nanocomposites doped with Nb2O5 for the purification of aqueous solutions from manganese. X-ray diffraction, energy–dispersive analysis, scanning electron microscopy, vibrational magnetic spectroscopy, and mössbauer spectroscopy were used as research methods. It is shown that an increase in the dopant concentration leads to the transformation of the shape of nanoparticles from spherical to cubic and rhombic, followed by an increase in the size of the nanoparticles. The spherical shape of the nanoparticles is characteristic of a structure consisting of a mixture of two phases of hematite (Fe2O3) and cerium oxide CeO2. The cubic shape of nanoparticles is typical for spinel-type FeNbO4 structures, the phase contribution of which increases with increasing dopant concentration. It is shown that doping leads not only to a decrease in the concentration of manganese in model solutions, but also to an increase in the efficiency of adsorption from 11% to 75%.

Description: To improve the working performance of the early annular jet pump (EAJP), a streamlined annular jet pump (SAJP) was proposed. The flow field and working performance of the EAJP and SAJP with an area ratio (m) of 1.75 were numerically studied and compared, separately, by using the combination of the Realizable k-ε turbulence model and the Schnerr–Sauer cavitation model. The results show that the efficiency of the SAJP is higher than that of the EAJP, when the flow ratio (q) is higher than 0.30, with a maximum increase of 1.2%. Furthermore, the high-efficiency area of the SAJP (q = 0.40~0.69) is wider than that of the EAJP (q = 0.36~0.57). There is no flow separation and low local pressure in the SAJP, due to the conjunction part of the suction chamber, throat, diffuser and outlet pipe without the structural mutation. It was found that the incipient cavitation number (σi) of the SAJP and EAJP was 0.541 and 0.578, respectively; therefore, the cavitation performance of the SAJP is better. Meanwhile, the critical flow ratio (qc) of the SAJP is 0.69, which is larger than that of the EAJP (qc = 0.57), implying that the SAJP has a wider normal working range than the EAJP. Importantly, the inception and development of cavitation appeared in the diffuser of the SAJP, different from that in the throat of the EAJP. Hence, it concluded that the cavitation in the SAJP has less influence on the flow field and working performance.

Description: The current COVID-19 cruise tourism crisis has evolved to epic proportions and placed some of the cruise lines on the verge of bankruptcy. This research aimed to gain a deeper understanding of the crisis. Using an inductive qualitative approach, interviews were conducted with eight frequent cruisers who were at home and eight cruise ship employees who were employed by various cruise companies and who were working on cruise ships during the COVID-19 cruise tourism crisis. The findings revealed a systematic failure within the cruise industry management to understand the COVID-19 pandemic. Results of this study highlight the importance of health-related perceived risks on the nature and impact of the COVID-19 cruise tourism crisis. This study supports the overall theory of cruise tourism and crisis management by extending the chaos theory and its principals on the COVID-19 cruise tourism crisis. The managerial implications for cruise lines are outlined.

Description: A three-year experiment was carried out in Central Greece to assess the use of different tillage practices (Conventional, Reduced, and No tillage) for seedbed preparation, in a double cropping per year rotation of irrigated and rainfed energy crops for biomass production for first- and second-generation biofuel production. A life cycle assessment (LCA) study was performed for the first year of crop rotation to evaluate the environmental impact of using different tillage practices, identifying the processes with greater influence on the overall environmental burden (hotspots) and demonstrating the potential environmental benefits from the land management change. LCA results revealed that fertilizer application and diesel fuel consumption, as well as their production stages, were the hot-spot processes for each treatment. In the present study, different tillage treatments compared using mass- and area-based functional unit (FU), revealing that reduced tillage, using strip tillage for spring crop and disc harrow for winter crops, and no tillage treatment had the best environmental performance, respectively. Comparison between the prevailing in the area monoculture cotton crop with the proposed double energy crop rotation adopting conservation tillage practices, using mass and energy value FU, showed that cotton crop had higher environmental impact.

Description: A common design concept of the piezoelectric force sensor, which is to assemble a bump structure from a flat or fine columnar piezoelectric structure or to use a specific type of electrode, is quite limited. In this paper, we propose a new design of cylindrical piezoelectric sensors that can detect multidirectional forces. The proposed sensor consists of four row and four column sensors. The design of the sensor was investigated by the finite element method. The response of the sensor to various force directions was observed, and it was demonstrated that the direction of the force applied to the sensor could be derived from the signals of one row sensor and three column sensors. As a result, this sensor proved to be able to detect forces in the area of 225° about the central axis of the sensor. In addition, a cylindrical sensor was fabricated to verify the proposed sensor and a series of experiments were performed. The simulation and experimental results were compared, and the actual sensor response tended to be similar to the simulation.

Description: In recent years, precipitation patterns in Korea have shifted to be characterized as short and intense rainfalls. In consideration of shallow landslide initiations primarily governed by heavy rainfalls at short-time scales that diminish drainage effects, the concept of critical continuous rainfall is proposed as a single-rainfall-variable threshold for shallow landslide forecasting. To generate a critical continuous rainfall map for hillslope areas in a city of Korea (Busan), this study designed and applied a systematic modeling process. As a preparatory stage, input datasets of geo-hydraulic properties and geotechnical properties were assembled using estimation techniques based on experiment data of field samples. The inherent and fixed critical continuous rainfall values for hillslope areas in Busan were derived through one-dimensional infiltration analysis coupled with infinite slope stability calculations. As a result of a detailed analysis of historical rainfall records in a case study area over a period of 11 years, three false forecasting cases were recorded, whereas all landslide-triggering rainfall events were correctly captured with no missed forecasting cases. The results of the case study indicate that the proposed critical continuous rainfall may be useful as an effective and straightforward indicator for forecasting the initiation of shallow landslides.

Description: This paper presents the effect of the impact of moisture in paper insulation used as insulation of transformer windings on its thermal conductivity. Various types of paper (cellulose and aramid) and impregnated (mineral oil, synthetic ester, and natural ester) were tested. The impact of paper and impregnated types on the changes in thermal conductivity of paper insulation caused by an increase in moisture were analyzed. A linear equation, describing the changes in thermal conductivity due to moisture, for various types of paper and impregnated, was developed. The results of measuring the thermal conductivity of paper insulation depending on the temperature are presented. The aim of the study is to develop an experimental database to better understand the heat transport inside transformers to assess aging and optimize their performance.

Description: This paper deals with the optimal reconfiguration problem of DC distribution networks by proposing a new mixed-integer nonlinear programming (MINLP) formulation. This MINLP model focuses on minimising the power losses in the distribution lines by reformulating the classical power balance equations through a branch-to-node incidence matrix. The general algebraic modelling system (GAMS) is chosen as a solution tool, showing in tutorial form the implementation of the proposed MINLP model in a 6-nodes test feeder with 10 candidate lines. The validation of the MINLP formulation is performed in two classical 10-nodes DC test feeders. These are typically used for power flow and optimal power flow analyses. Numerical results demonstrate that power losses are reduced by about 16% when the optimal reconfiguration plan is found. The numerical validations are made in the GAMS software licensed by Universidad Tecnológica de Bolívar.

Description: As satellite observation technology improves, the number of remote sensing images significantly and rapidly increases. Therefore, a growing number of studies are focusing on remote sensing image retrieval. However, having a large number of remote sensing images considerably slows the retrieval time and takes up a great deal of memory space. The hash method is being increasingly used for rapid image retrieval because of its remarkably fast performance. At the same time, selecting samples that contain more information and greater stability to train the network has gradually become the key to improving retrieval performance. Given the above considerations, we propose a deep hash remote sensing image retrieval method, called the hard probability sampling hash retrieval method (HPSH), which combines hash code learning with hard probability sampling in a deep network. Specifically, we used a probability sampling method to select training samples, and we designed one novel hash loss function to better train the network parameters and reduce the hashing accuracy loss due to quantization. Our experimental results demonstrate that HPSH could yield an excellent representation compared with other state-of-the-art hash approaches. For the university of California, merced (UCMD) dataset, HPSH+S resulted in a mean average precision (mAP) of up to 90.9% on 16 hash bits, 92.2% on 24 hash bits, and 92.8% on 32 hash bits. For the aerial image dataset (AID), HPSH+S achieved a mAP of up to 89.8% on 16 hash bits, 93.6% on 24 hash bits, and 95.5% on 32 hash bits. For the UCMD dataset, with the use of data augmentation, our proposed approach achieved a mAP of up to 99.6% on 32 hash bits and 99.7% on 64 hash bits.

Description: Desalination for sustaining agricultural production is conceived as an alternative water source in some Mediterranean countries faced with climatological and hydrological constraints. Although high costs are often cited as limiting factors, how farmers discern desalinated water has not been discussed in-depth in the literature. This paper aims to deepen how desalination is perceived by irrigators, what driving factors are affecting irrigation communities’ decision-making processes, and what learnings can be drawn from their experiences regarding desalination acceptance or rejection. Eleven irrigation communities have been selected from Alicante and Murcia regions (South-East Spain), which account for more than 60,000 irrigators and 120,000 ha. Questionnaires were conducted between March and December 2019. Results highlighted the main advantages (water availability and supply security) and disadvantages (high price affecting profitable crop options, high-energy consumption, water quality standards, the production capacity of desalination plants, no seasonal variation in water production, and shortages due to technical problems) of using desalinated water. Additionally, through the analysis of regional and national press news, it can be concluded that socio-political aspects, such as corruption, cost overruns, and political disputes are also considered.

Description: The change of the Earth’s climate and the increasing human action (e.g., increasing impervious areas) are influencing the recurrence and magnitude of flooding events and consequently the exposure of urban and rural communities. Under these conditions, flood hazard analysis needs to account for this change through the adoption of nonstationary approaches. Such methods, showing how flood hazard evolves over time, are able to support a long-term plan of adaptation in hazard changing perspective, reducing expected annual damage in flood prone areas. On this basis, in this paper a reevaluation of flood hazard in the Benevento province of southern Italy, is presented, providing a reduced complexity methodological framework for near future flood hazard prediction under nonstationary conditions. The proposed procedure uses multiple nonstationary probability models and a LiDAR-derived high-resolution inundation model to provide present and future flood scenarios in the form of hazard maps. Such maps are derived using a spatialization routine of stage probability across the inundation model that is able to work at different scales. The analysis indicates that, overall, (i) flood hazard is going to decrease in the next 30 years over the Benevento province and (ii) many areas of the Calore river floodplain are going to be subject to higher return level events. Consequently, many areas would require new guidelines of use as the hazard level decreases. Limitations of the analysis are related to the choice of the probability model and the parameter estimation approach. A further limit is that, currently, this method is not able to account for the presence of mitigation measurements. However, result validation indicates a very high accuracy of the proposed procedure with a matching degree, with a recently observed 225-years flood, estimated in 98%. On this basis, the proposed framework can be considered a very important approach in flood hazard estimation able to predict near future evolution of flood hazard as modulated by the ongoing climate change.

Description: Laser-based technologies are extensively used for polymer surface patterning and/or texturing. Different micro- and nanostructures can be obtained thanks to a wide range of laser types and beam parameters. Cell behavior on various types of materials is an extensively investigated phenomenon in biomedical applications. Polymer topography such as height, diameter, and spacing of the patterning will cause different cell responses, which can also vary depending on the utilized cell types. Structurization can highly improve the biological performance of the material without any need for chemical modification. The aim of the study was to evaluate the effect of CO2 laser irradiation of poly(L-lactide) (PLLA) thin films on the surface microhardness, roughness, wettability, and cytocompatibility. The conducted testing showed that CO2 laser texturing of PLLA provides the ability to adjust the structural and physical properties of the PLLA surface to the requirements of the cells despite significant changes in the mechanical properties of the laser-treated surface polymer.

Description: Background: Cervical cancer is one of the most common cancers in women and about 90% of cervical cancer can be reduced by regular screening. The Pap smear has been well in place as a primary cervical screening method since 1950s; however, coverage is still not optimal. This study explored the feasibility of HPV self-sampling in two under-screened population groups in Hong Kong (HK): never screened and not regularly screened females, to estimate the uptake rate and preference rate in the future. Materials and Methods: This was a cross-sectional study to explore the acceptability and feasibility of HPV self-sampling in two age groups: aged 25–35 and aged ≥45, which were reported as the highest proportion of the under-screened population in HK between 2017 and 2018. The study invited eligible women from an HPV study cohort to perform HPV self-sampling at home by themselves. The number of specimens returned from participants was recorded and used to determine the feasibility of HPV self-sampling in the community. The participants were asked to fill in the questionnaires before and after HPV self-sampling to indicate their attitudes, acceptability, and future preference for HPV self-sampling as an acceptable alternative primary cervical cancer screening method. Results: A total of 177 subjects participated in the present study and have achieved a good overall uptake rate of 73% (129/177) who returned the self-collected cervicovaginal sample for HPV testing. Among the under-screened population, there was a higher response rate in aged ≥45 than those aged 25–35. The findings also revealed that women who were under-screened, including those who have never been screened, were more likely to prefer HPV self-sampling than those who had regular screening. This study found that the acceptability of HPV self-sampling was fairly positive among the respondents. The findings also indicated that HPV self-sampling was not only beneficial to enhance their health awareness but also to promote the cervical cancer screening uptake rate, especially among the under-screened or never screened populations. Conclusions: HPV self-sampling would be a solution to overcome the perceived barriers in clinician-based screening. The findings also indicated that it could be feasible to use as an alternative primary cervical cancer screening.

Description: The research presented in the paper intends to overcome an information gap on the evolution of urbanized surfaces in Italy which in the studies carried out so far have never been available. The only historical data on this form of land use date back to the 1950s, and were extracted from a national cartography created by the Military Geographic Institute. The next chronological section available was then that of the noughties, already digital. However, much more frequent data were processed by the ten-year censuses by the National Institute of Statistics, but concerning buildings and not urbanized areas. By processing building census data, this study has put together some novel information on land take dynamics between the end of World War II and the year 2000, highlighting the more intensive processes that occurred at an extraordinary rate in the ‘70′s and ‘80′s, obtaining unprecedented information on the speed of transformation of the territory in these decades of economic boom. Through this method, we were able to obtain numerous geographical indications previously lacking on a national scale, highlight the yet significant vigor of this phenomenon and develop an inferential scenario.

Description: In this paper, the feasibility study to develop strain-based seismic design criteria applicable for the components of nuclear power plants are carried out as an alternative rule to the current stress-based criteria. To do this, two acceptance criteria are investigated through the detailed example of an application for the surge line nozzles in a nuclear steam supply system, which are known as one of the seismic fragile components in nuclear power plants. These strain-based seismic design criteria are primarily to prevent two types of failure modes, such as a ductile fracture and a cyclic fatigue-induced damage due to continuous large amplitude cyclic loads during seismic event. Through the example problem, the required procedures are described step-by-step with calculations of an accumulated plastic strain, triaxiality factor by the elasto-plastic seismic analysis using the finite element method. For a precise inelastic seismic analysis, the Chaboche kinematic and Voce isotropic hardening material parameters are identified by the test data and used for an inelastic material model. The results by the strain-based criteria are compared with those by the ASME (American Society of Mechanical Engineers) stress-based design criteria for a service level D limits. From the study, it is expected that the strain-based seismic design method investigated in this paper will be beneficial for the nuclear components, especially when the design basis earthquakes are large enough to cause severe plastic strains at a critical location.

Description: Public health recommendations and governmental measures during the new coronavirus disease (COVID-19) pandemic have enforced numerous restrictions on daily living including social distancing, isolation, and home confinement. While these measures are imperative to mitigate spreading of COVID-19, the impact of these restrictions on psychosocial health is undefined. Therefore, an international online survey was launched in April 2020 to elucidate the behavioral and lifestyle consequences of COVID-19 restrictions. This report presents the preliminary results from more than one thousand responders on social participation and life satisfaction. Methods: Thirty-five research organizations from Europe, North-Africa, Western Asia, and the Americas promoted the survey through their networks to the general society, in 7 languages (English, German, French, Arabic, Spanish, Portuguese, and Slovenian). Questions were presented in a differential format with questions related to responses “before” and “during” confinement conditions. Results: 1047 participations (54% women) from Asia (36%), Africa (40%), Europe (21%), and others (3%) were included in the analysis. Findings revealed psychosocial strain during the enforced COVID-19 home confinement. Large decreases (p 〈 0.001) in the amount of social activity through family (−58%), friends/neighbors (−44.9%), or entertainment (−46.7%) were triggered by the enforced confinement. These negative effects on social participation were also associated with lower life satisfaction (−30.5%) during the confinement period. Conversely, the social contact score through digital technologies significantly increased (p 〈 0.001) during the confinement period with more individuals (+24.8%) being socially connected through digital technology. Conclusion: These preliminary findings elucidate the risk of psychosocial strain during the early COVID-19 home confinement period in 2020. Therefore, in order to mitigate the negative psychosocial effects of home confinement, implementation of national strategies focused on promoting social inclusion through a technology-based solution is strongly suggested.