ALBERT

Description: Reliable automatic procedure for locating earthquake in quasi-real time is strongly needed for seismic warning system, earthquake preparedness, and producing shaking maps. The reliability of an automatic location algorithm is influenced by several factors such as errors in picking seismic phases, network geometry, and velocity model uncertainties. The main purpose of this work is to investigate the performances of different automatic procedures to choose the most suitable one to be applied for the quasi-real-time earthquake locations in northwestern Italy. The reliability of two automatic-picking algorithms (one based on the Characteristic Function (CF) analysis, CF picker, and the other one based on the Akaike Information Criterion (AIC), AIC picker) and two location methods (“Hypoellipse” and “NonLinLoc” codes) is analysed by comparing the automatically determined hypocentral coordinates with reference ones. Reference locations are computed by the “Hypoellipse” code considering manually revised data and tested using quarry blasts. The comparison is made on a dataset composed by 575 seismic events for the period 2000–2007 as recorded by the Regional Seismic network of Northwestern Italy. For P phases, similar results, in terms of both amount of detected picks and magnitude of travel time differences with respect to manual picks, are obtained applying the AIC and the CF picker; on the contrary, for S phases, the AIC picker seems to provide a significant greater number of readings than the CF picker. Furthermore, the “NonLin- Loc” software (applied to a 3D velocity model) is proved to be more reliable than the “Hypoellipse” code (applied to layered 1D velocity models), leading to more reliable automatic locations also when outliers (wrong picks) are present.

Description: Published

Description: 393–411

Description: 8T. Sismologia in tempo reale

Description: JCR Journal

Description: Public concern about anthropogenic seismic- ity in Italy first arose in the aftermath of the deadly M ≈ 6 earthquakes that hit the Emilia-Romagna region (northern Italy) in May 2012. As these events occurred in a (tectonically active) region of oil and gas production and storage, the question was raised, whether stress perturbations due to underground industrial activities could have induced or triggered the shocks. Following expert recommendations, in 2014, the Italian Oil & Gas Safety Authority (DGS-UNMIG, Ministry of Economic Development) published guidelines (ILG - Indirizzi e linee guida per il monitoraggio della sismicità, delle deformazioni del suolo e delle pressioni di poro nell’ambito delle attività antropiche), describing regula- tions regarding hydrocarbon extraction, waste-water in- jection and gas storage that could also be adapted to other technologies, such as dams, geothermal systems, CO2 storage, and mining. The ILG describe the frame- work for the different actors involved in monitoring activities, their relationship and responsibilities, the procedure to be followed in case of variations of mon- itored parameters, the need for in-depth scientific anal- yses, the definition of different alert levels, their mean- ing and the parameters to be used to activate such alerts. Four alert levels are defined, the transition among which follows a decision to be taken jointly by relevant au- thorities and industrial operator on the basis of evalua- tion of several monitored parameters (micro-seismicity, ground deformation, pore pressure) carried on by a scientific-technical agency. Only in the case of liquid reinjection, the alert levels are automatically activated on the basis of exceedance of thresholds for earthquake magnitude and ground shaking – in what is generally known as a Traffic Light System (TLS). Istituto Nazionale di Geofisica e Vulcanologia has been charged by the Italian oil and gas safety authority (DGS- UNMIG) to apply the ILG in three test cases (two oil extraction and one gas storage plants). The ILG indeed represent a very important and positive innovation, as they constitute official guidelines to coherently regulate monitoring activity on a national scale. While pilot studies are still mostly under way, we may point out merits of the whole framework, and a few possible critical issues, requiring special care in the implementa- tion. Attention areas of adjacent reservoirs, possibly licenced to different operators, may overlap, hence mak- ing the point for joint monitoring, also in view of the possible interaction between stress changes related to the different reservoirs. The prescribed initial blank- level monitoring stage, aimed at assessing background seismicity, may lose significance in case of nearby ac- tive production. Magnitude – a critical parameter used to define a possible step-up in activation levels – has inherent uncertainty and can be evaluated using differ- ent scales. A final comment considers the fact that relevance of TLS, most frequently used in hydraulic fracturing operations, may not be high in case of trig- gered tectonic events.

Description: Published

Description: 1015–1028

Description: 1IT. Reti di monitoraggio e sorveglianza

Description: JCR Journal

Description: This work presents the first chemical and isotopic (δ13C-CO2, δ13C-CH4, 3He, 4He, 20Ne, 40Ar, 36Ar, δ18O, and δD) data for fluid discharges fromGuallatiri volcano, a remote and massive stratovolcano, which is considered as the second most active volcano of the Central Volcanic Zone (CVZ) in northern Chile. Fumarolic gases had outlet temperatures of between 80.2 and 265 °C, and showed a significant magmatic fluid contribution marked by the occurrence of SO2, HCl, and HF that are partially scrubbed by a hydrothermal aquifer. The helium isotope ratios (〈 3.2) were relatively low compared to those of other active volcanoes in CVZ, possibly due to contamination of the magmatic source by 4He-rich crust and/or crustal fluid addition to the hydrothermal reservoir. Geothermometry in the H2O-CO2-CO-H2-CH4 system suggests equilibrium temperatures of up to 320 °C attained in a vapor phase at redox conditions intermediate between those typical of hydrothermal and magmatic environments. Thermal springs located 12 km northwest of the volcano’s summit had outlet temperatures of up to 50.1 °C, neutral to slightly basic pH, and a sodium bicarbonate composition, typical of distal fluid discharges in volcanic systems. Cold springs at the base of the volcanic edifice, showing a calcium sulfate composition, were likely produced by interaction of shallow meteoric water with CO2- andH2S-rich gases. A geochemical conceptual model was constructed to graphically represent these results, which can be used as an indication for future geochemical monitoring and volcanic hazard assessment.

Description: Published

Description: id 57

Description: 2V. Struttura e sistema di alimentazione dei vulcani

Description: 4V. Processi pre-eruttivi

Description: JCR Journal

Description: In this paper, we present results of the reconstruction of the total grain size distribution (TGSD) of the material erupted during explosive volcanic eruptions at Campi Flegrei (Italy) considering all components (juvenile, lithic and crystal clasts). To date, the few TGSDs made available have been mostly reconstructed by assuming that the tephra deposits consisted of only one component. This simplification can introduce substantial bias in the interpretation of magma fragmentation mechanisms and significantly affect ash dispersion forecasts, since each tephra component has specific aerodynamic characteristics. By means of field investigations and laboratory analyses on samples collected from deposits of the Agnano-Monte Spina and Astroni eruptions, we reconstructed the TGSDs of juvenile, lithic and crystal components via the Voronoi tessellation method. Our results show how the systematic reconstruction of a TGSD, from the component-specific to the bulk TGSD, can provide important information on magma fragmentation mechanisms and wall-rock erosion processes. Results confirm that the bulk TGSD is the combination of the merging of different component subpopulations, according to their own TGSD, density and relative mass proportions. In addition, the integration of component analysis, TGSD and settling velocity data allowed characterization of the aerodynamic behaviour of each component at variable distances from the vent, which can be related to their own parent grain size distribution. The integration of new data from distal tephra deposits for the considered eruptions has thus allowed a reassessment of the erupted volumes of eruptions considered in this research, which are now 3.17 and 0.63 km3, for Agnano-Monte Spina and Astroni, respectively.

Description: Published

Description: id 31

Description: 3V. Proprietà chimico-fisiche dei magmi e dei prodotti vulcanici

Description: JCR Journal

Description: In the last years, monitoring systems based on low-cost and miniaturized sensors (MEMS) revealed as a very successful compromise between the availability of data and their quality. Also applications in the field of seismic and structural monitoring have been constantly increasing in term of number and variety of functions. Among these applications, the implementation of systems for earthquake early warning is a cuttingedge topic, mainly for its relevance for the society as millions of peoples in various regions of the world are exposed to high seismic hazard. This paper introduces the optimization of an already established seismic (and structural) monitoring system, that would make it suitable for the implementation of the earthquake early warning. In particular, the sampling code has been improved and a new triggering algorithm able to automatically detect the ground shaking due to the propagation of the seismic waves has been developed. The preliminary results indicate that the system is very flexible and easy to implement, and encourage to perform further developing steps.

Description: Published

Description: 963-975

Description: Cagliari

Description: 5T. Sismologia, geofisica e geologia per l'ingegneria sismica

Description: The aim of this paper is to identify the ground motion models (GMMs), applicable in active shallow crustal regions (ASCRs) and subduction zones (SZs), to be used for the new release of the seismic hazard model of Italy (MPS19) for peak ground acceleration and 12 ordinates of the acceleration response spectra (5% damping) in the period range 0.05–4 s. The steps to achieve such goal are: (1) a pre-selection of the GMMs that takes into account the suitability for the application to the Italian territory and the fulfillment of the new hazard model requirements; (2) the assessment of a proper scoring of the pre-selected GMMs using strong-motion data recorded in Italy; (3) the selection of the GMMs to be used in the hazard calculation. The final set of GMMs describes satisfactorily the epistemic uncertainty of the ground shaking process, privileging the simplicity and flexibility of the functional form. Finally, the weights of the selected GMMs are assigned combining the results of the scoring and the weights obtained through an experts’ elicitation.

Description: Published

Description: 3487–3516

Description: 6T. Studi di pericolosità sismica e da maremoto

Description: JCR Journal

Description: Seismic refraction, multichannel analysis of surface waves (MASW) and ambient noise array measurements using the wireless array analysis (WARAN) system were applied to acquire near-surface profiles of seismic velocities in the Selinunte Archaeological Park. This ancient city is famous for numerous temples, which according to the literature, were destroyed by at least two earthquakes in antiquity. The morphology of the archeological park is affected by two rivers which in combination with the temple remains suggests three study sites. We determined the subsurface velocity at these three locations as essential information for further studies of the response of the temple structures to earthquake ground motions. The stratigraphy of the site indicates that low-velocity layers might exist. Seismic refraction profiles with 69 m spread and 24 geophones were employed during the active seismic experiments. The measured P-wave velocities of the top two layers were used as a constraint during the inversion of dispersion relations from the MASW and WARAN data. The reliability of the velocity profiles was tested by forward calculation of synthetic seismograms. P-wave velocities which were not well constraint throughout the dispersion curve inversions were adjusted through suitable Poisson’s ratios based on the well constraint S-velocities. The combined use of the three different kinds of measurements and multi-mode interpretation of the dispersion curves revealed velocity profiles including lowvelocity layers which are supported by de-amplification observed in ratios of horizontal and vertical components of noise spectra.

Description: Published

Description: 753–776

Description: 7A. Geofisica per il monitoraggio ambientale

Description: JCR Journal

Description: Mapping the static gravity field in the Italian area is fundamental to identify the main lithospheric structures, to delineate the main geological elements at regional level and to infer the regional geodynamic setting. The ongoing tectonic processes highlight nevertheless the need to measure and model the time-variable gravity field, namely the dynamic gravity field, which requires increased accuracy and long time series of observations to separate the secular from the short-term variable components. The first, with a minor impact in Italy, are due to variations of ice mass balance (the viscoelastic response of the Earth to past changes in ice mass loading, and the elastic response of the Earth to present-day deglaciation), and the sealevel rise; the second are due to space/time variations of underground mass distributions, such as those related to seismic deformations, volcanic dynamics/eruptions and water transfer. Local-scale gravity studies along seismogenic faults may provide useful hints to study the seismic cycle and to unravel those areas more prone to seismic release by studying if the crustal volume is undergoing dilatancy (gravity decrease) or overpressure (gravity increase) before earthquake occurrence. This process, however, is accompanied by possible fluid migration, which can be revealed by other geophysical measurements, for example, by magnetotelluric and geoelectrical surveys. In this short paper, we briefly summarize the main sources of gravity variation providing on the same time orders of magnitude, spatial and temporal scales of their effects.

Description: Published

Description: 549-558

Description: 2T. Deformazione crostale attiva

Description: JCR Journal

Description: Ocean acidification is one of the most dramatic effects of the massive atmospheric release of anthropogenic carbon dioxide (CO2) that has occurred since the Industrial Revolution, although its effects on marine ecosystems are not well understood. Submarine volcanic hydrothermal fields have geochemical conditions that provide opportunities to characterise the effects of elevated levels of seawater CO2 on marine life in the field. Here, we review the geochemical aspects of shallow marine CO2-rich seeps worldwide, focusing on both gas composition and water chemistry. We then describe the geochemical effects of volcanic CO2 seepage on the overlying seawater column. We also present new geochemical data and the first synthesis of marine biological community changes from one of the best-studied marine CO2 seep sites in the world (off Vulcano Island, Sicily). In areas of intense bubbling, extremely high levels of pCO2 ([10,000 latm) result in low seawater pH (\6) and undersaturation of aragonite and calcite in an area devoid of calcified organisms such as shelled molluscs and hard corals. Around 100–400 m away from the Vulcano seeps the geochemistry of the seawater becomes analogous to future ocean acidification conditions with dissolved carbon dioxide levels falling from 900 to 420 latm as seawater pH rises from 7.6 to 8.0. Calcified species such as coralline algae and sea urchins fare increasingly well as sessile communities shift from domination by a few resilient species (such as uncalcified algae and polychaetes) to a diverse and complex community (including abundant calcified algae and sea urchins) as the seawater returns to ambient levels of CO2. Laboratory advances in our understanding of species sensitivity to high CO2 and low pH seawater, reveal how marine organisms react to simulated ocean acidification conditions (e.g., using energetic tradeoffs for calcification, reproduction, growth and survival). Research at volcanic marine seeps, such as those off Vulcano, highlight consistent ecosystem responses to rising levels of seawater CO2, with the simplification of food webs, losses in functional diversity and reduced provisioning of goods and services for humans.

Description: Published

Description: 93–115

Description: 2IT. Laboratori analitici e sperimentali

Description: JCR Journal

Description: The investigation of soil response to dynamic loads is necessary to predict site-specific seismic hazard. This paper presents the results of cyclic and dynamic laboratory tests carried out after the 2016–2017 Central Italy Earthquake sequence, within the framework of the seismic microzonation studies of the most damaged municipalities in the area. The database consists of 79 samples investigated by means of dynamic resonant column tests, cyclic torsional shear tests or cyclic direct simple shear tests. Results are firstly analysed in terms of field and laboratory values of small-strain shear wave velocity, highlighting the influence of the sample disturbance and of the mean effective consolidation pressure. The cyclic threshold shear strains as a function of plasticity index are then compared with findings from the published literature and the outliers are analysed. Subsequently, the dynamic soil behaviour is investigated with reference to the small-strain damping ratio. Differences between results from different tests are analysed in the light of the loading frequencies. Finally, the database is used to develop a predictive model for soil nonlinear curves according to plasticity index, mean effective confining stress, and loading frequency. The model represents a useful tool to predict the nonlinear stress–strain behaviour of Central Italy soils, necessary to perform site-specific ground response analyses.

Description: Published

Description: 5503–5531

Description: 5T. Sismologia, geofisica e geologia per l'ingegneria sismica

Description: JCR Journal