ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (3,051)
  • INSTRUMENTATION AND PHOTOGRAPHY  (1,189)
  • FLUID MECHANICS AND HEAT TRANSFER  (1,113)
  • SPACECRAFT PROPULSION AND POWER  (749)
  • 1975-1979  (3,051)
Collection
  • Other Sources  (3,051)
Source
Keywords
Years
Year
  • 1
    facet.materialart.
    Unknown
    Motions of a liquid in a pulsating bulb with application to problems of blood flow (1976)
    In:  CASI
    Details
    Publication Date: 2010-11-08
    Description: Potential flows may be utilized to represent motions produced in pulsating bulbs. While the initial bulb shape may be arbitrary, sequential shapes are related by affine transformations. Two components appear in the distribution of pressure, one dependent on the instantaneous velocity and the other on the acceleration. For flows with stationary streamlines the inertial impedance is that of a simple mass, and is proportional to the first moment of the actual mass of fluid contained within the bulb. Examples treated are: (1) Expanding and collapsing circular cylinders, and (2) elliptical cylinders in which the perimeter is held constant. The thickness of the pulsatile laminar boundary layer is found to be approximately on millimeter for conditions in the vicinity of the heart. Conditions for separation and turbulence differ from those in steady flow.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Ames Res. Center Collected Works of Robert T. Jones; p 957-965
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    Investigation B: Laminar confined coaxial entrance flow with heat generation (1975)
    In:  CASI
    Details
    Publication Date: 2009-11-16
    Description: The results of a parametric study on the entrance flow region in a gas core nuclear reactor are presented. The physical system is modeled as laminar confined, coaxial flow with heat generation in the inner fluid. The governing equations include the boundary layer approximations and the assumptions of only radial radiative transport of energy represented as an energy diffusion term. The Von Mises transformation and a zeta transformation are used to transform the equations into nonlinear nonhomogeneous convective-diffusion equations. A unique combination of forward and backward difference equations which yields accurate results at moderate computational times, is used in the numerical method. Results show that the rapidly accelerating, heat generating inner stream actually shrinks in radius as it expands axially.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Turbulence Coefficients and Stability Studies for the Coaxial Flow or Dissimiliar Fluids; 76 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Nonlinear effects in thermal stress analysis of a solid propellant rocket motor (1976)
    In:  CASI
    Details
    Publication Date: 2006-08-09
    Description: Direct characterization procedures were used to determine the relaxation modulus as a function of time, temperature, and state of strain. Using the quasi-elastic method of linearviscoelasticity, these properties were employed in a finite element computer code to analyze a thick-walled, nonlinear viscoelastic cylinder in the state of plane strain bonded to a thin (but stiff) elastic casing and subjected to slow thermal cooling. The viscoelastic solution is then expressed as a sequence of elastic finite element solutions. The strain-dependent character of the relaxation modulus is included by replacing the single relaxation curve used in the linear viscoelastic theory by a family of relaxation functions obtained at various strain levels. These functions may be regarded as a collection of stress histories or responses to specific loads (in this case, step strains) with which the cooldown solution is made to agree by iterations on the modulus and strain level.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA. Langley Res. Center Advan. in Eng. Sci., Vol. 1; p 111-135
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    A numerical comparison with an exact solution for the transient response of a cylinder immersed in a fluid (1979)
    In:  CASI
    Details
    Publication Date: 2006-07-02
    Description: The transient response of an elastic cylindrical shell immersed in an acoustic media that is engulfed by a plane wave is determined numerically. The method applies to the USA-STAGS code which utilizes the finite element method for the structural analysis and the doubly asymptotic approximation for the fluid-structure interaction. The calculations are compared to an exact analysis for two separate loading cases: a plane step wave and an exponentially decaying plane wave.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Shock and Vibration Inform. Center The Shock and Vibration Bull., Pt. 3; p 23-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    The plume impingement test program at AEDC utilizing the S-2 ullage motors (November 1973), section 1 (1976)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: Proposed experiments for analyzing rocket plumes are reported. Two groups of experiments were studied: (1) those that would help define some of the parameters that characterize the plume and (2) those that would enable evaluation of some of the contamination effects of the plume environment on various items of interest. The items investigated, the purpose of the investigation, are given in tabular form.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: The Effects of Solid Rocket Motor Effluents on Selected Surfaces and Solid Particle Size, Distribution, and Composition for Simulated Shuttle Booster Separation Motors; p 12-95
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    The small motor plume/material impingement test program at MSFC utilizing nine different propellant formulations (April and May 1974), section 2 (1976)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: The relative effects of several candidate SSRM propellant formulations and their plume impingement effects on HRSI and RCC materials were evaluated. Nine solid propellant formulations were tested. The selected propellant matrix allowed an evaluation of propellants with and without metal additives, with and without burning rate catalyst, and low (approximately 1927 C) and high (approximately 2649 C) combustion temperatures. Motors were fired at a simulated SRB staging altitude of 3.96 km (130,000 ft) (nominal). The altitude pressure was predicted to drop approximately 0.6 km (20,000 ft) during a motor firing. All motors were loaded with 1.8 to 2.3 kg (4 to 5 lb) of propellant and burned for approximately 2 s.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: The Effects of Solid Rocket Motor Effluents on Selected Surfaces and Solid Particle Size, Distribution, and Composition for Simulated Shuttle Booster Separation Motors; p 96-151
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    The large motor plume/material impingement test program at AEDC utilizing the four selected propellants from the small motor tests at MSFC (July, August, and September 1974), section 3 (1976)
    In:  CASI
    Details
    Publication Date: 2006-04-12
    Description: Efforts made to determine the vulnerability of Orbiter and ET materials located at various positions within exhaust plumes from test SSRM's using four different propellant formulations are discussed. Data also cover the effect on TPS materials from a single SSRM plume and dual SSRM plumes, and definitions of test SSRM plume environment at material specimen locations.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: The Effects of Solid Rocket Motor Effluents on Selected Surfaces and Solid Particle Size, Distribution, and Composition for Simulated Shuttle Booster Separation Motors; p 152-203
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Application of fluidics to new control components (1978)
    In:  CASI
    Details
    Publication Date: 2006-03-02
    Description: The inherent tolerance for nuclear radiation makes fluidic devices candidates for nuclear rocket control systems. Also, they are being considered for supersonic jet engine inlet control because of their high temperature and vibration tolerance. Three new control components being considered for these applications are described. A fluidic circuit to control a pneumatic stepping motor for nuclear rocket control drum actuation is discussed. An all-fluidic sensor being developed for determining the position of the normal shock in the inlet of a supersonic jet engine is outlined. A new vortex valve configuration is developed to prevent supersonic jet engine inlet unstarts by regulating bypass flow.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA, Washington Fourth Inter-Center Control Systems Conf.; p 365-386
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Holography and LDV techniques, their status and use in airfoil research (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: The measurement capabilities of laser velocimetry and holographic interferometry in transonic airfoil testing were demonstrated. Presented are representative results obtained with these two nonintrusive techniques on a 15.24 cm chord airfoil section. These results include the density field about the airfoil, flow angles in the inviscid flow and viscous flow properties including the turbulent Reynolds stresses. The accuracies of the density fields obtained by interferometry were verified from comparisons with surface pressure and laser velocimeter measurements.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 589-599
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Instrumentation, techniques and data reduction associated with airfoil testing programs at Wichita State University (1978)
    In:  CASI
    Details
    Publication Date: 2006-02-22
    Description: Two dimensional airfoil testing was conducted at the Wichita State University Beech Wind Tunnel for a number of years. The instrumentation developed and adapted during this period of testing for determination of flow fields along with traversing mechanisms for these probes are discussed. In addition, some of the techniques used to account for interference effects associated with the apparatus used for this two dimensional testing are presented. The application of a minicomputer to the data reduction and presentation is discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Langley Res. Center Advanced Technol. Airfoil Res., Vol. 1, Pt. 2; p 539-558
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Flow phenomena peculiar to calculation of compressible turbulent boundary layers (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Calculation procedures for compressible turbulent boundary layers were based upon techniques, modeling constants, etc., developed originally for the low speed case. Significant differences and new or altered physics which occur in the compressible case were considered, as compared with the low speed situation. Possible pitfalls and sources of inaccuracy in the calculations were indicated.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 9-46
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Instrumentation for space flight experiments (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The selection of measurement systems for experiments conducted in the context of a space flight must be guided by the criteria applicable to any scientific study requiring objective measurements of physiological variables. Steps fundamental to the process of choosing the best instrumentation system are identified and the key factors in matching the operational characteristics of the instrumentation to its intended use are discussed. Special problems in obtaining data from nonhuman primates, whether restrained or unrestrained, are explored. Choices for data processing are evaluated as well as the use of prototype flight tests and simulations to assess future life science experiments for spacelab or payloads for the space shuttle biomedical scientific satellite.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Use of Nonhuman Primates in Space; p 225-243
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Propellant mass usage and flow measurement (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Practices are outlined for the design, installation, checkout, calibration, and operation of a system to be used for measuring propellant flow in a liquid monopropellant rocket engine. Design guidelines rather than detailed specifications are provided for the critical components of each portion of the system. System elemental uncertainties are presented in an appendix.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Handbook of Recommended Practices for the Determination of Liquid Monopropellant Rocket Engine Performance; 32 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    The Temperature Humidity Infrared Radiometer (THIR) subsystem (1978)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The infrared radiation from the earth in two spectral bands during both day and night portions of the orbit is measured. Pictures of cloud cover, three dimensional mappings of cloud cover, temperature mappings of clouds, land, and ocean surface, cirrus cloud content, atmospheric contamination, and relative humidity are provided.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Nimbus 7 User's Guide 247-262 (SEE N79-20148 11-12)
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    The Scanning Multichannel Microwave Radiometer (SMMR) experiment (1978)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Ocean momentum and energy transfer parameters on a nearly all weather operational basis are obtained and used. The winds, water vapor, liquid water content, temperature, and mean cloud droplet size are derived from low altitude parameters.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Nimbus 7 User's Guide; p 213-246
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Surface-tension-induced convection experiment MA-041 (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: In the absence of gravity, stirring in a liquid is suppressed because of density differences caused by thermal or compositional gradients. However, other mechanisms resulting in natural convection in a microgravity environment exist. One of the most important mechanisms for liquid metals is surface tension driven convection, which becomes predominant in the low gravity environment. In this case, surface tension differences caused by compositional or temperature gradients have been demonstrated to cause stirring in liquids during experiments performed onboard Skylab. Compositional gradients were created by adding a soap solution to a large water globule, which caused vigorous fluid motion for some moments after the addition.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: NASA. Lyndon B. Johnson Space Center Apollo-Soyuz Test Project; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Summary of calculation procedures for nonsimilar two- and three-dimensional compressible turbulent boundary layers (finite difference, finite element and weighted residual methods), appendix (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: This numerical prediction summary indicates the wide variety of such procedures which are available. Most procedures have detailed user manuals, and in many cases the codes are available. Many of the special effects treated by various methods (such as nonequilibrium or equilibrium chemistry, transition, roughness etc.) are indicated.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 69-78
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Calculation of three-dimensional compressible turbulent boundary layers (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: From comparisons of high speed data with low speed closure procedures using variable mean density, there does not appear to be any appreciable influence of compressibility upon turbulent shear stress modeling in compressible turbulent boundary layers, even for extreme cases such as Mach 14 to 20 with a change in density across the layer of up to a factor of 100. Other evidence of apparent lack of compressibility caused new physics which may alter the shear stress for the compressible boundary layer cases including: (1) fluctuation Mach number was generally less than 1; (2) the shear stress distribution through the boundary layer was not a function of Mach number for zero pressure gradient flows; (3) the Morkovin hypothesis was valid up to Mach 5 (based on fluctuation data); (4) profile N power was not a function of Mach number, at least up to Mach 10; and (5) the nondimensional burst period was approximately the same as that for low speed.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 47-68
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Equations and closure methods (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Basic differential equations governing compressible turbulent boundary layer flow are reviewed, including conservation of mass and energy, momentum equations derived from Navier-Stokes equations, and equations of state. Closure procedures were broken down into: (1) simple or zeroth-order methods, (2) first-order or mean field closure methods, and (3) second-order or mean turbulence field methods.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Calculation Methods for Compressible Turbulent Boundary Layers, 1976; p 6-8
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Basic stages in the development of the theory of Ramjet Engines (RJE) (1977)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Basic periods in the history of the development of ramjet engine theory are cited. The periods include the first experimental tests as well as the development of basic ideas and theoretical development of the cosmic ramjet engine.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA, Washington Essays on the History of Rocketry and Astronautics, Vol. 1; p 229-238
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Pressure measurement (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Practices are outlined for the design, installation, checkout, calibration, and operation of a pressure measuring system to be used during tests of a liquid monopropellant rocket engine. Appendixes include: (1) pressure measurement system elemental uncertainties; (2) short- and long-term pressure measurement system uncertainty; (3) shunt calibration of pressure transducers; (4) special considerations for vacuum measurement; and (5) methods of determining the dynamic characteristics of pressure transducers. Design guidelines are provided for the critical components of each portion of the system to provide a pressure measurement system which meets the performance criteria specified.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Handbook of Recommended Practices for the Determination of Liquid Monopropellant Rocket Engine Performance; 76 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    The Coastal Zone Color Scanner (CZCS) experiment (1978)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The CZCS is used to map chlorophyll concentration, sediment distribution, gelbstroffe concentration, and temperature of coastal waters and the open ocean. The data processing techniques used to enhance contrasts over the ocean and to remove the effect of the backscattered atmosphere are presented. The multi-channel scanning radiometer of CZCS is described. The content of water is determined primarily by the CZCS measurement.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center The Nimbus 7 User's Guide; p 19-32
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Science demonstrations (1976)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Three demonstrations of scientific concepts concerning liquids were performed during the Apollo-Soyuz Test Project mission. Chemical foaming, spreading of liquids, and capillary wicking were the subjects of each demonstration photographed in space. The results clearly illustrated the basic principles, and films suitable for educational uses are now available from the first author.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Apollo-Soyuz Test Project; 9 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    DSN water vapor radiometer development: Recent work, 1978 (1978)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: A water vapor radiometer (WVR) was developed that measures the atmospheric noise temperature at two different frequencies near 22 GHz. These noise temperature are used in empirical-theoretical equations that yield tropospheric range delay, in centimeters, through the atmosphere along the beam of the WVR. This range correction is then applied, as needed, to measurements concerning spacecraft range and to VLBI baseline determinations. The WVR design and calibration techniques are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Deep Space Network; p 129-135
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Frequency selection and calibration of a water vapor radiometer (1978)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The calibration coefficients of existing water vapor radiometers are dependent upon meteorology profiles. This is shown to be due mainly to incorrect frequency pairs. By properly selecting an optimum frequency pair, the dependency can be reduced to a relatively small amount which can be handily adjusted by surface measurement alone. Hence, a universal calibration equation is applicable to all environmental conditions - site, seasonal and diurnal variations. Optimum frequency pairs are systematically searched. Error analysis indicates that calibration for the water vapor phase delay accurate to less than 2 cm is possible at all elevation angles greater than 15 degrees.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Deep Space Network; p 67-81
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Preliminary design work on a DSN VLBI correlator (1978)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The Deep Space Network is in the process of fielding high-density digital instrumentation recorders for support of the Pioneer Venus 1978 entry experiment and other related tasks. It has long been obvious that these recorders would also serve well as the recording medium for very long base interferometry (VLBI) experiments with relatively weak radio sources, provided that a suitable correlation processor for these tape recordings could be established. The overall design and current status of a VLBI correlator designed to mate with these tape recorders are described.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: The Deep Space Network; p 90-98
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Temperature measurement (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: The design, installation, checkout, calibration, and operation of a temperature measuring system to be used during tests of a liquid monopropellant rocket engine are discussed. Appendixes include: (1) temperature measurement system elemental uncertainties, and (2) tables and equations for use with thermocouples and resistance thermometers. Design guidelines are given for the critical components of each portion of the system to provide an optimum temperature measurement system which meets the performance criteria specified.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Handbook of Recommended Practices for the Determination of Liquid Monopropellant Rocket Engine Performance; 36 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Force and impulse measurement (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Practices are outlined for the design, installation, checkout, calibration, and operation of a thrust measurement system to be used during tests of a liquid monopropellant rocket engine. Appendixes include: (1) thrust measurement system elemental uncertainties; (2) short- and long-term thrust measurement system uncertainty; and (3) shunt calibration of force transducers.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Handbook of Recommended Practices for the Determination of Liquid Monopropellant Rocket Engine Performance; 28 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Data reduction and performance determination (1979)
    In:  CASI
    Details
    Publication Date: 2006-01-12
    Description: Definitions, algorithms, and procedures for the reduction of monopropellant thruster measurements to performance parameters are provided. A brief discussion of acquisition and recording systems is also included. Emphasis is placed upon monopropellant hydrazine engines, and some parameters relate specifically to the catalytic decomposition of hydrazine (e.g., percent ammonia dissociation). Performance of other types of monopropellant thrusters may, however, be determined by using procedures similar to those discussed. Two appendixes are included: (1) theoretical performance of monopropellant hydrazine; and (2) calculation of rotational performance.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Handbook of Recommended Practices for the Determination of Liquid Monopropellant Rocket Engine Performance; 45 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Heat pipes in space: A NASA summary (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Experiences derived from the development, integration, and flight of NASA spacecraft and sounding rockets are presented. They include the International Heat Pipe Experiment, OAO 3, and ATS-6. Typical flight data are presented to show the performance.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: ESA Heat Pipes; p 647-653
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    An aneroid pressure sensor for constant-level balloons (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The pressure sensor for the Tropical Wind Energy conversion and Reference Level Experiment (TWERLE) is described. Key design features of the sensor are: capacitive coupling, reference at midrange, up-down counting, passive oven, storage at flight pressure and prelaunch calibration. Sensor specifications are given which are based on the production results of 440 units. Drift, as estimated from simulated life tests, is 1 mb per 6 months. The overall weight of the sensor, including thermal package, is 180 g.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Meteorology; 14; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Empirical correlations for heat transfer and flow friction characteristics of rectangular offset-fin plate-fin heat exchangers (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Inviscid interpenetration of two streams with unequal total pressures (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A theory is proposed for analyzing the inviscid interpretation of two streams in the case when the difference in total pressure between the streams is relatively small. A stream is considered which discharges from a nozzle or reservoir into a partially moving and partially stationary environment in such a way that the flows leave the solid boundaries in a tangential direction where the two streams first interact. The problem is solved by expanding in a small parameter related to the difference in total pressure between the streams, the zeroth-order solution is obtained by classical methods, and a technique similar to that employed in thin-airfoil theory is used to transfer the first-order boundary conditions to the zeroth-order boundary. A procedure is developed to transform the problem into one that can be solved by standard techniques of the theory of sectionally analytic functions. Solutions are obtained for flows with and without free streamlines, and the general theory is applied to several specific flow configurations.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Fluid Mechanics; 70; Aug. 12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Infrared upconversion as a means of seeing in the dark (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A new approach to seeing in the dark is described which is based on the principles of nonlinear optics employing a crystal such as lithium iodate. A nonlinear optical device capable of producing photons at higher frequencies from lower-frequency incident light is shown to upconvert infrared light directly into visible light. The major advantages of the infrared upconversion process is that it permits the infrared signal to be detected by photon-counting devices presently available for the visible spectral region, and that it can provide sensitivity to infrared radiation without the need for cryogenic cooling of the detector used. Early works on infrared upconversion are reviewed. The development of applications is discussed as to astronomical spectroscopy and infrared image upconversion involving either angular or positional resolution elements. The demonstration of infrared upconversion in rectangular waveguides of single-crystal GaAs by Anderson et al. (1971) indicates future possibilities in upconversion by the use of integrated optics devices.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Optical Sciences Center Newsletter; 9; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    An infrared heterodyne radiometer for high-resolution measurements of solar radiation and atmospheric transmission (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A tunable, Dicke-switched, infrared heterodyne radiometer (IHR) has been designed, fabricated, tested, and used to observe solar radiation and determine the atmospheric transmissivity in the 9-11-micron spectral band. The IHR provides a spectral resolution of 0.0067 reciprocal cm, a minimum detectable power level of 2.9 times ten to the minus twenty-third power W/Hz, and a temperature resolution of less than 1 K for a source temperature of 1000 K, an IF predetection bandwidth of 100 MHz, and an integration time of 30 s. Detailed design equations and measured IHR performance are presented. The IHR was used to make solar and atmospheric transmission measurements, and a vertical-path atmospheric attenuation of 2.3 dB has been established under favorable weather conditions. The attenuation of solar radiation due to cloud cover and haze has also been investigated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE Journal of Quantum Electronics; QE-11; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    Radiation exchange for a system with partially transmitting wall (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An approach is presented for applying the net radiation method developed by Siegel and Howell (1972) and Sparrow and Cess (1966) to systems involving opaque and partially transmitting walls. The results obtained from the basic equations for various values of plate emissivities and temperatures are presented in graphs. Attention is given to the window temperature relative to the temperature of the hot wall and the heat transferred relative to that transferred without the window.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Letters in Heat and Mass Transfer; 2; Mar
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    The Viking Mars lander camera (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The 7.3 kg cameras for the 1976 Viking Mars expedition feature an array of 12 silicon photodiodes, including six spectral bands for color and near-infrared imaging with an angular resolution of 0.12 deg and four focus steps for broadband imaging, with an improved angular resolution of 0.04 deg. The field of view in elevation ranges from 40 deg above to 60 deg below the horizon, and in azimuth ranges to 342.5 deg. The cameras are mounted 0.8 m apart to provide a stereo view of the area accessible to a surface sampler for biological and chemical investigations. The scanning rates are synchronized to the lander data transmission rates of 16000 bits per sec to the Viking orbiters as relay stations and 250 bits per sec directly to earth. However, image data can also be stored on a lander tape recorder. About 10 million bits of image data will be transmitted during most days of the 60-day-long mission planned for each lander.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Space Science Instrumentation; 1; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    The Pioneer XI high field fluxgate magnetometer (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The high field fluxgate magnetometer experiment flown aboard the Pioneer XI spacecraft is described. This extremely simple instrument was used to extend the spacecraft's upper-limit measurement capability by approximately an order of magnitude (from 0.14 mT to 1.00 mT) with minimum power and volume requirements. This magnetometer was designed to complement the low-field measurements provided by a helium vector magnetometer and utilizes magnetic ring core sensors with biaxial orthogonal sense coils. The instrument is a single-range, triaxial-fluxgate magnetometer capable of measuring fields of up to 1 mT along each orthogonal axis, with a maximum resolution of 1 microT.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Space Science Instrumentation; 1; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Derivation and application of the reciprocity relations for radiative transfer with internal illumination (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A Green's function formulation is used to derive basic reciprocity relations for planar radiative transfer in a general medium with internal illumination. Reciprocity (or functional symmetry) allows an explicit and generalized development of the equivalence between source and probability functions. Assuming similar symmetry in three-dimensional space, a general relationship is derived between planar-source intensity and point-source total directional energy. These quantities are expressed in terms of standard (universal) functions associated with the planar medium, while all results are derived from the differential equation of radiative transfer.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Quantitative Spectroscopy and Radiative Transfer; 15; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Radiation from an array of longitudinal fins of triangular profile (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Radiation from an array of longitudinal fins of triangular profile is analyzed, including fin-to-fin and fin-to-base interactions. The effect of base cylinder radiation and the fin-base radiative interaction is found to be significant for fin width/tube radius ratios less than 8. Results presented may be used to optimize the design of a fin array with respect to weight.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AIAA Journal; 13; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Effect of grid transparency and finite collector size on determining ion temperature and density by the retarding potential analyzer (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The effects of the grid transparency and finite collector size on the values of thermal ion density and temperature determined by the standard RPA (retarding potential analyzer) analysis method are investigated. The current-voltage curves calculated for varying RPA parameters and a given ion mass, temperature, and density are analyzed by the standard RPA method. It is found that only small errors in temperature and density are introduced for an RPA with typical dimensions, and that even when the density error is substantial for nontypical dimensions, the temperature error remains minimum.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Geophysical Research; 80; June 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    Phase correction for a Michelson interferometer with misaligned mirrors (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The phase correction for a Michelson interferometer with misaligned mirrors in converging light is shown to give rise to a quadratic phase shift. In general, the calculation of a spectrum from the measured interferogram needs phase correction. Phase corrections have been well worked out for the cases of a linear phase shift and a phase that is slowly varying. The standard procedures for correcting calculated spectra need to be modified, however, to remove any phase errors resulting from misaligned mirrors.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 14; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Comment on 'subsonic and supersonic boundary-layer flow past a wavy wall' (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AIAA Journal; 13; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    The Pioneer 10/11 and Helios A/B cosmic ray instruments (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: This paper describes the design and performance of a set of cosmic-ray particle experiments for the Pioneer 10/11 and Helios A/B space missions. These experiments had to be very light-weight, low-power and electronically sophisticated in order to meet the spacecraft and scientific requirements. Both sets of missions use several solid-state detector telescopes to measure protons from 100 KeV to 800 MeV and heavier ions up to Neon at 200 MeV per nucleon. Good performance is required for 7-8 years, and the system must tolerate large vibration loads and ionizing radiation doses up to 500,000 rads.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Materials and processes for space shuttle's engines (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: It is pointed out that over 50 different alloys are used in construction of the space shuttle main engines (SSME). Primary construction of the SSME is by welding or brazing of wrought and cast components. Welding processes involve both gas tungsten-arc welds and electron-beam welds. Electroforming has been developed as a process to fabricate and bond structural members for the SSME. Important aspects in the selection of materials and processes are related to weight saving considerations and the high-pressure hydrogen environment. Special problems and their solution in the case of various engine components are discussed, giving attention to the oxidizer preburner, the high pressure oxidizer turbopump, and the heat exchanger.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Characteristics of the unsteady motion on transversely sheared mean flows (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: An explicit representation for the unsteady motion on a transversely sheared mean flow is obtained which corresponds to the gustline motion on a uniform mean flow. The important features of this motion are discussed. It is shown that its velocity, pressure and vorticity are all induced by a certain disturbance field that is a linear combination of the vorticity and particle-displacement fields and is everywhere frozen in the mean flow. The general ideas are illustrated by considering the scattering of a gust by a half-plane embedded in a shear flow.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Fluid Mechanics; 84; Jan. 30
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Parallel-burn options for dual-fuel single-stage orbital transports (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A parallel-burn version of a single-stage vehicle for transport from the earth to low-earth orbit using two fuels and rocket propulsion is considered. New engine results were incorporated in vehicle performance and design studies. The results indicate that a hydrogen-cooled gas generator cycle engine provides attractive vehicle performance and that there is little incentive for increasing the chamber pressure beyond 27 MPa.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Journal of Spacecraft and Rockets; 15; Jan
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Development of a drift-correction procedure for a photoelectric spectrometer (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A technique has been developed to automatically correct for drifts in the radiometric sensitivity of the detector channels in a direct-reading emission spectrometer. The method utilizes a 1000 W tungsten-halogen reference lamp to illuminate the detectors through the same optical path as that traversed during the analysis of the sample. Detector channel responses to the light are compared to those for the same light intensity at the time of analytical calibration. This corrects for the drift. It is noted that with the exception of positioning the lamp, the procedure is fully automatic.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Spectroscopy; 32; Jan
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    Gamma ray spectroscopy in astrophysics: Future role of scintillation detectors (1978)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The future role of conventional scintillation detector telescopes for line gamma-ray astronomy is discussed. Although the energy resolution of the germanium detectors now being used by several groups is clearly desirable, the larger effective areas and higher efficiencies available with scintillation detectors is advantageous for many observations. This is particularly true for those observations of astrophysical phenomena where significant line broadening is expected.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: NASA. Goddard Space Flight Center Gamma Ray Spectry. in Astrophys.; p 438-449
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Mass-dependent channel electron multiplier operation (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The absolute counting efficiency and pulse height distributions of a continuous-channel electron multiplier used in the detection of hydrogen, argon and xenon ions are assessed. The assessment technique, which involves the post-acceleration of 8-eV ion beams to energies from 100 to 4000 eV, provides information on counting efficiency versus post-acceleration voltage characteristics over a wide range of ion mass. The charge pulse height distributions for H2 (+), A (+) and Xe (+) were measured by operating the experimental apparatus in a marginally gain-saturated mode. It was found that gain saturation occurs at lower channel multiplier operating voltages for light ions such as H2 (+) than for the heavier ions A (+) and Xe (+), suggesting that the technique may be used to discriminate between these two classes of ions in electrostatic analyzers.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 48; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Galatry profile convolved with the Fabry-Perot instrument function (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The physical conditions in laboratory gases and in the upper atmosphere of the planets, including earth, can be deduced from a measurement of the intensity and line profile of different radiating molecules. Because of the low pressures in the upper atmospheres, many molecular lines with small pressure-broadening coefficients are collisionally narrowed. These lines are resolvable with a Fabry-Perot interferometer. Analytical expressions are given relating the measured line intensity and profile to the true line intensity and profile. A deconvolution of the measured profile gives the parameters A, beta, and K characterizing the collisionally narrowed Galatry profile. General expressions for the nonideal interferometer are discussed, and, specifically, mirror defects and a limited detector aperture are treated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 16; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Three-dimensional low Reynolds number flows with a free surface (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The two-dimensional leveling problem (Degani, Gutfinger, 1976) is extended to three dimensions in the case where the flow Re number is very low and attention is paid to the free surface boundary condition with surface tension effects included. The no-slip boundary condition on the wall is observed. The numerical solution falls back on the Marker and Cell (MAC) method (Harlow and Welch, 1965) with the computation region divided into a finite number of stationary rectangular cells (or boxes in the 3-D case) and fluid flow traverses the cells (or boxes).
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Computational Physics; 24; May 1977
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    A CW ultrasonic bolt-strain monitor (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: There exists a need for a relatively inexpensive system for measuring strain in bolts. The torque wrench is one technique for straining bolts which has been widely applied. Unfortunately, friction in the bolt threads and between the nut and the work tend to make such a simple system inaccurate. In practice, a torque wrench is unacceptable for many situations where strain is critical. In this article, an ultrasonic technique is described which can indicate changes in bolt strain to better than one part in 10,000. The technique is based on the one-dimensional propagating-ultrasonic-wave model and uses a new ultrasonic instrument called a Reflection Oscillator Ultrasonic Spectrometer which is a closed-loop feedback marginal-oscillator system that frequency locks the device to the peak of a mechanical resonance in the bolt. The instrument indicates a shift in the bolt resonance frequency due to elongation and changes in velocity of sound due to strain. Data are presented comparing a standard torque wrench to the ultrasonic monitor for different measured stresses on the bolt as well as for different bolt conditions. The strain instrument can be used to monitor changing stresses, to measure material properties and may be applied as a strain gage or load cell.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Experimental Mechanics; 17; May 1977
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    A combined boundary-profile and automated data-reduction and analysis system (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A portable boundary-layer meteorological data-acquisition and analysis system is described which employs a small tethered balloon and a programmable calculator. The system is capable of measuring pressure, wet- and dry-bulb temperature, wind speed, and temperature fluctuations as a function of height and time. Other quantities, which can be calculated in terms of these, can also be made available in real time. All quantities, measured and calculated, can be printed, plotted, and stored on magnetic tape in the field during the data-acquisition phase of an experiment.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Boundary-Layer Meteorology; 10; Aug. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Reconstructing color images of astronomical objects using black and white spectroscopic emulsions (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A color photograph of the peculiar elliptical galaxy NGC 5128 (Centaurus A) has been reconstructed from three Kodak 103a emulsion type photographs by projecting positives of the three B&W plates through appropriate filters onto a conventional color film. The resulting photograph shows color balance and latitude characteristics superior to color photographs of similar astronomical objects made with commercially available conventional color film. Similar results have been obtained for color reconstructed photographs of the Large and Small Magellanic Clouds. These and other results suggest that these projection-reconstruction techniques can be used to obtain high-quality color photographs of astronomical objects which overcome many of the problems associated with the use of conventional color film for the long exposures required in astronomy.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Photographic Engineering; 2; Spring 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Derivation of the Navier-Stokes equation (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The proposed approach to the derivation of the Navier-Stokes equation is thought to be more plausible and easier to understand than other derivations that can be found in works on fluid mechanics. The tensor character of the stress is central to the derivation. In particular, a linear relation between stress and strain rate is assumed only for the shear, rather than for the full stress tensor as is done in most other derivations. An assumption for the shear is naturally simpler and easier to verify experimentally. The use of tensor analysis is shown to greatly simplify the derivation.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: American Journal of Physics; 44; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Six-beam models in radiative transfer theory (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A critical analysis is given of the applicability of six-beam models to radiative transfer in particulate materials. The method of introducing transverse scattering in these models is shown to cause fundamental difficulties in the case of physically plausible phase functions; in particular, the effective absorptivity is abnormally large and thus results in incorrect reflectances and transmittances. Six-beam calculations for several media are compared with accurate solutions, with Chu-Churchill two-beam results, and with a simple modification to the Eddington approximation, the last being generally superior over a wide range of conditions.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Applied Optics; 15; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Influence of heat transfer on the stability of parallel flow between concentric cylinders (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The stability of the parallel flow of water between concentric cylinders at different temperatures is investigated for infinitesimal velocity and pressure disturbances. Primary interest is in the effect of heat transfer and the radius ratio a/b on the critical point of the neutral stability curve. The results indicate a strong dependence of the critical eigenvalues on both the heat transfer and the radius ratio. The critical Reynolds number of the nonisothermal flow appears to approach a finite value as the inner radius approaches zero (pipe flow) by showing an inflection point on the curve of critical Reynolds number vs a/b.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Physics of Fluids; 19; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Thermal diffusivity measurements of particulates using the differentiated line source (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A method is described in which thermal diffusivity measurements can be made on particulate materials using the identical instrumentation as described in previous papers for measuring thermal conductivity. The measurements for the two properties can be made simultaneously, thus eliminating the changes in conditions when they are made separately. This system has particular application for studies of simulated lunar, planetary, or asteroidal surfaces in which laboratory measurements can be correlated with astronomical observations of thermal inertia. A representative set of data is shown which gives thermal diffusivity and thermal conductivity measurements on a particulate basalt in which the values for each temperature were taken simultaneously. A value for specific heat is calculated for measurements taken at each temperature.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 46; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    Comparison of theory and experiment for homogeneous turbulence with shear (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Solutions for uniformly-sheared turbulence, in which the interaction of the turbulence with the mean shear dominates the turbulent self-interaction, are compared with experiment. An anisotropic spectral tensor, which appears general enough to represent the initial experimental turbulence, is used for the initial condition in the calculations. The evolution of one-point turbulence components and microscales, as well as two-point velocity correlations, are considered. In most cases the agreement with experiment is good. The theory correctly predicts the presence of a negative region for two-point longitudinal-velocity correlations only for point separations in the direction normal to the flow and the mean gradient.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Physics of Fluids; 18; Oct. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Testing of a photoelectric photometer. 2: Observational testing (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The versatility is demonstrated of the 41 cm. Tortugas reflector's photoelectric system through observations of V566 Oph and R CrB with four associated AAVSO comparison stars. These observations were made between May and October, 1974.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Contrib. of the Observatory of N. Mex. State Univ., Vol. 1, No. 4; p 154-158
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Influence of probe geometry on pitot-probe displacement in supersonic turbulent flow (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An experiment was conducted to determine the varying effects of six different probe-tip and support-shaft configurations on pitot tube displacement. The study was stimulated by discrepancies between supersonic wind-tunnel tests conducted by Wilson and Young (1949) and Allen (1972). Wilson (1973) had concluded that these discrepancies were caused by differences in probe geometry. It is shown that in fact, no major differences in profiles of streamwise velocity over streamwise velocity at boundary-layer edge vs normal coordinate over boundary-layer total thickness result from geometry. The true cause of the discrepancies, however, remains to be discovered.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AIAA Journal; 13; July 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Flow rates for sharp-edged orifices (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Two charts are proposed for calculating the flow coefficient and the area correction factor used in the equation for the flow rate through a sharp-edged orifice. The proposed charts account for variations in the discharge coefficient of sharp-edged orifices and can be used with any pressure ratio for both subcritical and supercritical flow conditions. They can also be used for any gas by using the appropriate gas constant and ratio of specific heats. The application of the charts is illustrated by examples.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Machine Design; 47; June 12
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Apparatus for production, measurement and reaction studies of dissociated gases at elevated temperatures (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An apparatus is described which is used for the controlled production, characterization, and study of dissociated gases in a microwave discharge at elevated temperatures. A unique feature is the ability to produce and study a microwave discharge plasma in the heated zone. This allows elevated temperature reactions to be studied in high concentrations of dissociated gases. Further, the system permits weight change measurements of specimens in the plasma, thus facilitating reaction rate determinations. Included is a description of a cavity for use on a 50-mm diameter cylindrical reactor. The effects of flow rate, pressure, temperature, power, metal sample, and sampling position on dissociation percentage of oxygen in the apparatus are described as well as a technique for sample temperature measurements in the plasma which permits determination of high temperature recombination coefficients and reaction rates.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE Transactions on Plasma Science; PS-3; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Pulse modulation effect on velocity fringes (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The degradation of a hologram caused by object motion can be utilized to measure the rate of change of the length of an object beam. A rectangular shaped laser pulse is ordinarily used to illuminate the object in such an investigation. The velocity fringes obtained are considered in the calculation. There are no velocity fringes for Gaussian shaped pulses or for the pulses produced by a Q-switched ruby laser. It is shown with the aid of a mathematical analysis that a pulse of oscillating intensity or a pulse train will yield velocity fringes regardless of the shape of an individual pulse.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 14; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    The development of an L-band radiometer dual-mode horn (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An antenna was developed for the remote microwave measurement of ocean surface temperature during a flight test in a C54 aircraft. The basic antenna is a conical dual-mode horn similar to the dual-mode horn described by Potter (1963). The pertinent internal dimensions of the horn are given. The measured E and H plane patterns for the linearly polarized horn for a range of frequencies are shown in a graph.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE Transactions on Antennas and Propagation; AP-23; May 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    Radiative equilibrium in a rectangular enclosure bounded by gray walls (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Two-dimensional temperature and heat-flux distributions are calculated for an absorbing-emitting gray medium at radiative equilibrium in a rectangular enclosure. The bounding walls are gray and diffuse with arbitrary surface-temperature distributions, and heat generation may take place inside the medium. As a first approximation, the problem is solved for optically thick systems (differential approximation). These results are subsequently improved by the introduction of a number of geometrical parameters to yield good accuracy for all optical thicknesses. As examples, two cases are discussed in detail: (1) uniform heat generation in a black enclosure, and (2) an enclosure with one gray surface at constant temperature. Comparison with some numerical solutions generated by Hottel's /Hottel and Cohen (1958) and Einstein (1963)/ zonal method shows excellent agreement.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Journal of Quantitative Spectroscopy and Radiative Transfer; 15; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    A new high-speed solar spectrograph for meter and decameter wavelengths (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Solar Physics; 40; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Collecting efficiency of a cylindrical mirror electron energy analyzer with pre-retarding lens (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The electron collecting efficiency of a cylindrical mirror energy analyzer incorporating retardation of the electrons prior to analysis has been determined over the range 0 to 30 eV by two methods. The first method requires the use of a vacuum ultraviolet monochromator to produce monoenergetic electrons of different energies; the second method involves measuring the energy-brightness relationship of the retarding optics and should be applicable to any deflection analyzer with pre-retarding optics. The results of the two methods are compared and the limitations of the latter method are discussed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Electron Spectroscopy and Related Phenomena; 6; 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    An all-sky camera for time-resolved lightning photography (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Applied Meteorology; 14; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Calibration of a cylindrical RF capacitance probe (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Ambient electron concentrations derived from observations with the Radio Astronomy Explorer 1 antenna capacitance probe have been compared with upper hybrid resonance measurements from the same spacecraft. From this comparison an empirical correction factor for the capacitance probe measurements has been derived. The differences between the two types of measurements is attributed to sheath effects.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Journal of Geophysical Research; 80; Feb. 1
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    The use of Whatman-41 filters for high volume air sampling (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The feasibility of using W41 filter media on a routine TSP high-volume monitoring network was determined by comparison with glass fiber (GF) filtering. Results indicate that suspended particulate samples from GF filters averaged slightly, but not significantly, higher than those from Whatman-41 filters. Some extra handling procedures were required to avoid errors due to the hygroscopic nature of W41 filters; these added procedures are not overly burdensome, however, and they allow the performance of analytical work, thus extending the capabilities of high-volume sampling. It was demonstrated that W41 filters are practical for air quality monitoring and elemental analysis in environments similar to Cleveland's.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Atmospheric Environment; 9; 1975
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Infrared heterodyne spectroscopy of astronomical and laboratory sources at 8.5 microns (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: It is pointed out that the first successful infrared heterodyne spectrometer featuring semituneable semiconductor diode lasers was constructed and used near 8.5 micrometers to make laboratory measurements of line profiles in nitrous oxide and to detect thermal emission from Mars and from the moon. Questions of instrument design are discussed along with the significance of the results obtained in the investigation.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Nature; 253; Feb. 13
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    Two high resolution velocity vector analyzers for cosmic dust particles (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Two new methods are described to measure velocities and angles of incidence of charged cosmic dust particles with precisions of about 1% and 1 deg, respectively. Both methods employ four one-dimensional position-sensitive detectors in series. The first method utilizes a charge-dividing technique while the second utilizes a time-of-flight technique for determining the position of a particle inside the instrument. The velocity vectors are measured although mechanical interaction between the particle and the instrument is completely avoided. Applications to cosmic dust composition and collection experiments are discussed. The range of radii of measurable particles is from about 0.01 to 100 microns at velocities from 1 to 80 km/sec.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Review of Scientific Instruments; 46; Feb. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    Investigation A: Numerical solutions of driven vortices of binary fluid in a cylindrical geometry (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The steady state laminar motion of a viscous, incompressible and binary fluid is studied for a rotating flow in a cylindrical geometry. The mathematical model employed is a cold flow simulation of the fluid mechanics of the light-bulb concept of the gaseous core nuclear engine. A numerical treatment is developed for the rotating flow which includes a description of the nuclear fuel addition. The problem is formulated with the complete Navier-Stokes equations in order to show the interaction between the fuel addition, the main flow, and the boundary layer flow in an accurate manner. The results presented show holdup of the nuclear fuel for the case of steady fuel addition.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Turbulence Coefficients and Stability Studies for the Coaxial flow or Dissimiliar Fluids; 146 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Plastic scintillation counters with an area of 2 sq m (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Two designs of plastic scintillation counters with an area of 2 sq m scanned in each case by a single photomultiplier of the FEU-49 type are described. The radial dependence of their light collection at the place of the path of the detected particle does not exceed 10% while the half width of the differential distribution of the pulse amplitudes from nonfiltered cosmic radiation at sea level is 90 to 95%, and 65%, the plastic thickness being 5 cm and 10 cm, respectively. The temperature coefficient of the counter is 0.32% per 1 C.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (NASA-TT-F-807); p 389-393
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Generalization of formulas for ionization energy losses and collision cross section in threshold detectors (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Two types of formulas were obtained for (- dE/dx) and the number of collisions per unit of path length (dN/dx) = const, which depend on W sub m, with due account of the polarization effect of the medium.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (NASA-TT-F-807); p 355-360
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Spark calorimeter: An instrument for determining particle energy of cosmic radiation (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: In 1964 a spark calorimeter was installed at the NOR-Amberd Station (2000 m above sea level). The advantages of this calorimeter over the ionization calorimeter are illustrated.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (NASA-TT-F-807); p 349-354
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    An instrument for the study of the composition of the electron component of cosmic rays (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A telescope consisting of three spark chambers and two control scintillation counters has been designed and is used for investigating the composition of the cosmic ray electron component within the range of energies from 1.0 to 10.0 BeV by the EN assymetry method. The geometrical factor of the telescope is approximately 20 sq cm ster. Discharges are recorded in the chambers on a photo film. The telescope is oriented to the azimuth with an accuracy of + or - 3 deg.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (NASA-TT-F-807); p 341-348
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Gas threshold Cerenkov counters (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The report describes two designs are reported of gas threshold Cerenkov counters for recording electrons of primary cosmic rays without recording protons. Also presented are design and technological measures which ensure maximum light collection of the Cerenkov radiation originating on the photocathode of the photomultiplier inside the radiator. The dependence of the reflection factor on the length of the light wave for different coatings is shown as well as for the throughput of the different optical materials employed. A range of methods for determining the efficiency of the counters during the recording of cosmic ray nucons and ways of increasing it further are given.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (NASA-TT-F-807); p 327-332
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Certain problems in the development and design of scintillation and Cerenkov counters (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: The feasibility is examined of increasing the effectiveness of the scintillation and Cerenkov counters through improving light collection of the recorded radiation on the photoelectric cathode of the photomultiplier. An example of how to select a detector of the directional plexiglas Cerenkov counter is given. Also presented are experimentally obtained amplitude distributions during the recording of cosmic ray muons. The necessity to obtain agreement between the characteristic spectrum of the photocathode of the photomultiplier and the spectrum of the recorded radiation is stressed.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (NASA-TT-F-807); p 302-307
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    A system for multichannel recording and automatic reading of information (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: A system for the recording and processing of telescope data is considered for measurements of EW asymmetry. The information is recorded by 45 channels on a continuously moving 35-mm film. The dead time of the recorder is about 0.1 sec. A sorting electronic circuit is used to reduce the errors when the statistical time distribution of the pulses is recorded. The recorded information is read out by means of photoresistors. The phototransmitter signals are fed either to the mechanical recorder unit for preliminary processing, or to a logical circuit which controls the operation of the punching device. The punched tape is processed by an electronic computer.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (NASA-TT-F-807); p 293-297
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Description of an ionization calorimeter complemented with proportional counters (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: An ionization calorimeter is described with a system of proportional counters which are used to determine the charge of the particles incident to the calorimeter and to estimate the number of the secondary charged particles.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (; p 287-289
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Large neutron counters for supermonitors (1975)
    In:  Other Sources
    Details
    Publication Date: 2011-08-16
    Description: Large neutron counters designed for the neutron supermonitor with an area of about 20 sq m are reported. Statistical accuracy of the counters is 0.1% per 2 hours. Dimensions: length--2 m; diameter--150 mm; pressure--200 mm Hg. The counters are filled with BF3 gas containing over 80% of B-10.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Cosmic Rays (; p 279-281
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    Supersonic Mixing and Combustion in Parallel Injection Flow Fields (1975)
    In:  CASI
    Details
    Publication Date: 2011-01-13
    Description: Adequate prediction techniques for supersonic, mixing, reacting flows are of great importance in the design and performance analysis of supersonic combustion ramjet (scramjet) engines. Analytical programs for parallel injection flow fields with chemical reaction and turbulent mixing are now available for both single and multiple-jet flows. The application of these analyses to simple flow geometries is discussed, and comparisons also are made with data on the more complex case of multiple-jet, reacting flows. A review is given of Langley investigations of parallel injection flow fields. Among these are single-jet studies of nonreacting, turbulent mixing (H2 in air and H2 in N2), and of reacting turbulent mixing (H2 in air) with both single and multiple jets. Implications of the results of the studies for scramjet fuel injector design are discussed.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AGARD Anal. and Numerical Methods for Invest. of Flow Fields with Chem. Reactions, Especially Related to Combust.; 8 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    The Surface Contour Radar, a unique remote sensing instrument (1979)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A 36 GHz computer controlled airborne Surface Contour Radar (SCR) is described, which was developed by the Naval Research Laboratory and NASA. The system uses pulse-compression techniques and dual frequency carriers spaced far enough apart to be decorrelated on the sea surface. The continuous wave transmitter is biphase modulated, the return signal is autocorrelated, and the code length and clock rate are variable, providing selectable range resolutions of 0.15, 0.30, 0.61 and 1.52 m. The SCR generates a false-color coded elevation map of the sea surface below the aircraft in real time, and can routinely produce ocean directional wave spectra with off-line data processing.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Quasi-microscope concept for planetary missions (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Viking lander cameras have returned stereo and multispectral views of the Martian surface with a resolution that approaches 2 mm/lp in the near field. A two-orders-of-magnitude increase in resolution could be obtained for collected surface samples by augmenting these cameras with auxiliary optics that would neither impose special camera design requirements nor limit the cameras field of view of the terrain. Quasi-microscope images would provide valuable data on the physical and chemical characteristics of planetary regoliths.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 16; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    Kinetic theory analysis of rarefied gas flow through finite length slots (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A kinetic-theory analysis is made of the flow of a rarefied monatomic gas through a two-dimensional slot connecting two reservoirs. Numerical solutions are obtained by the moment and discrete-ordinate methods. The former method portrays the transition-regime characteristics well but has limitations in the free-molecule regime. The latter method gives accurate results in the free-molecule and slip regimes and bolsters confidence in the accuracy of the transition-regime results. The numerical solution for the mass flux through the slot agrees well with an approximate analytical solution of the moment equations for length-to-width ratios from 6 to 0.5, pressure ratios from 0.8 to 0.1, and Knudsen numbers from 5 to 0.5.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Physics of Fluids; 20; June 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Large-area multi-crystal NaI/Tl/ detectors for X-ray and gamma-ray astronomy (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: An array of large multicrystal NaI(Tl) detectors was constructed and used in a balloon-borne experiment to observe weak transient bursts of cosmic origin. The array had an active area of about 1 sq m and was sensitive to photons above 50 keV. Localized bursts which were observed are attributed to long-lived phosphorescence following large energy deposits by cosmic rays in the crystals.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Nuclear Instruments and Methods; 140; 1976
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    Maximum theoretical angular accuracy of planar and linear arrays of sensors (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The maximum theoretical accuracy in the angular location of a radiating object that can be obtained by using a planar or linear array is studied. The elements are assumed to have identical radiation patterns and the complex voltages observed at their ports are assumed to be subject to phase measurement errors, having normal probability density. An optimum scheme for the statistical extraction of the parameters defining the direction is established noting that the presence of thermal noise does not affect the structure of the estimator. Comparisons with the conventional multiple interferometric techniques are made.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: IEEE Transactions on Aerospace and Electronic Systems; AES-13; Mar. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Ultraviolet response of InGaAsP photocathodes (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Three type VPM 164 photomultiplier tubes with III-IV compound InGaAsP reflective photocathodes were developed for use in ground-based and space-borne astronomical detectors. Although the achieved response of about 0.02% quantum efficiency at 1.083 microns fell short of the goal of 1% quantum efficiency, the broadband characteristics are still considerably better than those of the S-1 photocathode.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 16; Apr. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Numerical computation of transient coaxial entry tube flows (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A numerical program was developed to compute transient laminar flows in two dimensions including multicomponent mixing and chemical reaction. The program can compute both incompressible flows and compressible flows at all speeds, and it is applied to describe transient and steady state solutions for low subsonic, coaxial entry, tue flows. Single component, nonreacting flows comprise most of the solutions, but one steady state solution is presented for trace concentration constituents engaging in a second order reaction. Numerical stability was obtained by adding at each calculation point a correction for numerical diffusion errors caused by truncation of the Taylor series used to finite difference the conservation equations. Transient computations were made for fluids initially at rest, then subjected to step velocity inputs that were uniform across each region of the entry plane and were held constant throughout the computation period. For center tube to annulus velocity ratios of 0.5 and 2.0, the bulk fluid in the tube initially moved in plug flow, but strong radial flows developed near the injection plane which moved the fluid into the high shear region between the jets and away from the tube wall.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Computers and Fluids; 4; Dec. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    Airborne bathymetric charting using pulsed blue-green lasers (1977)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Laboratory and airborne experiments have proven the feasibility and demonstrated the techniques of an airborne pulsed laser system for rapidly mapping coastal water bathymetry. Water depths of 10 plus or minus 0.25 m were recorded in waters having an effective attenuation coefficient of 0.175 m. A 2-MW peak power Nd:YAG pulsed laser was flown at an altitude of 600 m. An advanced system, incorporating a mirror scanner, a high pulsed rate laser, and a good signal processor, could survey coastal zones at the rate of several square miles per hour.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: Applied Optics; 16; Jan. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Transport processes in boiling and two-phase systems, including near-critical fluids (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Aspects of pool boiling are considered, taking into account nucleate boiling, the nucleate boiling mechanism, film boiling, and the transition between nucleate and film boiling. The characteristics of two-phase flow are also investigated, giving attention to two-phase flow parameters and equations, the flow pattern in two-phase flow, the pressure drop in two-phase flow, heat transfer in two-phase flow, two-phase flow dynamics, the boiling crisis in two-phase flow, the critical flow rate, the propagation of the pressure pulse and the sonic velocity in two-phase media, instrumentation for two-phase flow, and geometry and field effects on boiling and two-phase flow. Near-critical fluids are also considered.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Effects of atomic oxygen on graphite ablation (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: It is shown that a previously derived semiempirical equation for describing observed ablation rates of isotropic graphites cannot be applied to low-density flows containing dissociated oxygen. Experimentally determined reaction probabilities of isotropic graphites to molecular and atomic oxygen are used to calculate heat-transfer rates and stagnation-point ablation rates for typical conditions. Integrated mass losses are computed for a group of flight trajectories which start from geosynchronous orbit and enter earth's atmosphere in a skipping motion following near-elliptic decaying orbits. A comparison of the results with those obtained by the equation under question shows excellent agreement for steep trajectories, but large discrepancies for shallow trajectories. The differences are attributed to surface oxidation by atomic oxygen.
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: AIAA Journal; 14; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Nonlinear effects for the Taylor column for a hemisphere (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: When a flow is forced past an obstacle in a rapidly rotating fluid, a Taylor column forms. This is defined by a set of vertical detached shear layers circumscribing the obstacle which provide the smooth transition from an external inviscid potential flow to a stagnant core above the obstacle. For a hemispherical object, the main adjustment takes place in an external E to the 1/4 power layer and an internal E to the 2/7 power layer; here, the nonlinear flow in these layers is investigated. The problem in the E to the 1/4 power layer is identical to a problem occurring in magnetohydrodynamic flow; in addition, some features of the magnetohydrodynamic problem have been resolved. Numerical solutions are obtained for the steady nonlinear external E to the 1/4 power layer flow up to the point where unsteady flow separation from the Taylor column is imminent. The response of the internal E to the 2/7 power layer to the flow in the E to the 1/4 power layer is calculated, and the results suggest that the internal shear layer is unlikely to play any significant role in the separation process
    Keywords: FLUID MECHANICS AND HEAT TRANSFER
    Type: Physics of Fluids; 19; Nov. 197
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    CCD correlation techniques (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: Two CCD techniques were discussed for performing an N-point sampled data correlation between an input signal and an electronically programmable reference function. The design and experimental performance of an implementation of the direct time correlator utilizing two analog CCDs and MOS multipliers on a single IC were evaluated. The performance of a CCD implementation of the chirp z transform was described, and the design of a new CCD integrated circuit for performing correlation by multiplication in the frequency domain was presented. This chip provides a discrete Fourier transform (DFT) or inverse DFT, multipliers, and complete support circuitry for the CCD CZT. The two correlation techniques are compared.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    RECON 6: A real-time, wide-angle, solid-state reconnaissance camera system for high-speed, low-altitude aircraft (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: The maturity of self-scanned, solid-state, multielement photosensors makes the realization of "real time" reconnaissance photography viable and practical. A system built around these sensors which can be constructed to satisfy the requirements of the tactical reconnaissance scenario is described. The concept chosen is the push broom strip camera system -- RECON 6 -- which represents the least complex and most economical approach for an electronic camera capable of providing a high level of performance over a 140 deg wide, continuous swath at altitudes from 200 to 3,000 feet and at minimum loss in resolution at higher altitudes.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; p 129-134
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    High data rate performance of a BCCD for rapid scan imaging (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: A commercially available 1728 element shallow bulk channel CCD line array was clocked at output data rates up to 30 MHz. Temporal noise was near 200 electrons and was largely independent of clock rate. Charge transfer efficiency was in excess of 0.9999 at 30 MHz. Utilization is feasible for visual simulation and aerial mapping.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; p 72-82
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    Development of large area CCD imagers (1976)
    In:  Other Sources
    Details
    Publication Date: 2011-08-17
    Description: High performance CCD imagers with 800 x 50 resolution elements were fabricated using a coplanar, double polysilicon, electrode system. The imager was developed as a prototype to demonstrate the feasibility of an 800 x 800 array for application to deep space photography where data rates of 10K to the 2nd power and operating temperatures of -40 C are required. The performance is discussed and comparisons made to the existing 400 x 400 imager.
    Keywords: INSTRUMENTATION AND PHOTOGRAPHY
    Type: JPL Conf. on Charge-Coupled Device Technol. and Appls.; 3 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...