ALBERT

Description: Controlling competing vegetation during early growth is one of the most important practices for the successful establishment of poplar plantations. Today, most poplar plantations in temperate regions are established on abandoned marginal agricultural land where competing vegetation is usually present during the first years after planting. Thus, the objective of this study was to examine how the growth of two kinds of poplar planting materials, un-rooted cuttings and bare-rooted seedlings was influenced by different vegetation control and soil preparation practices. Across treatments, un-rooted cuttings grew more rapidly than the bare-rooted seedlings. Our results also show that mulching with a degradable carpet or permanent polyethylene plastic increased seedling growth to a similar extent and more strongly in the cases of no treatment (in control plots). In addition, the results suggest that soil preparation in the mulched area favored seedling growth, but this effect was restricted to the first year after planting. These findings indicate that optimal practices for establishing poplar plantations on former agricultural land include planting un-rooted cuttings in prepared soil and mulching.

Description: Recent disasters, such as the 2010 Haiti earthquake, have drawn attention to the potential role of citizens as active information producers. By using location-aware devices such as smartphones to collect geographic information in the form of geo-tagged text, photos, or videos, and sharing this information through online social media, such as Twitter, citizens create Volunteered Geographic Information (VGI). To effectively use this information for disaster management, we developed a VGI framework for the discovery of VGI. This framework consists of four components: (i) a VGI brokering module to provide a standard service interface to retrieve VGI from multiple resources based on spatial, temporal, and semantic parameters; (ii) a VGI quality control component, which employs semantic filtering and cross-referencing techniques to evaluate VGI; (iii) a VGI publisher module, which uses a service-based delivery mechanism to disseminate VGI, and (iv) a VGI discovery component to locate, browse, and query metadata about available VGI datasets. In a case study we employed a FOSS (Free and Open Source Software) strategy, open standards/specifications, and free/open data to show the utility of the framework. We demonstrate that the framework can facilitate data discovery for disaster management. The addition of quality metrics and a single aggregated source of relevant crisis VGI will allow users to make informed policy choices that could save lives, meet basic humanitarian needs earlier, and perhaps limit environmental and economic damage.

Description: Background and Purpose: The aim of the present study was to assess a relationship between readiness to quit and post-stroke smoking behavior. Methods: Eighty-six active smokers with first-ever ischemic stroke were recruited in a tertiary-care stroke unit. The question “Are you ready to quit smoking within the next month?” with yes/no responses and the 10-cm readiness visual analog scale (VAS) was administered during the anti-smoking intervention. Smoking status was verified at the 3- and 12-month follow-up. Results: The readiness VAS score at hospitalization was significantly lower in patients classified as smokers as compared to patients classified as non-smokers. The readiness score 〈5 cm was a significant predictor of smoking at the 3-month (OR, 7.3) and 12-month follow-up (OR, 4.9). Conclusions: The present results suggest that the readiness VAS can be used as a simple and inexpensive instrument for early identification of patients who continue to smoke after stroke.

Description: In this work, the plastic deformation mechanisms responsible for mechanical properties and fracture toughness in  nanotwinned (NT) magnesium is studied by molecular dynamics (MD) simulation. The influence of twin boundary (TBs) spacing and crack position on deformation behaviors are investigated. The microstructure evolution at the crack tip are not exactly the same for the left edge crack (LEC) and the right edge crack (REC) models according to calculations of the energy release rate for dislocation nucleation at the crack tip. The LEC growth initiates in a ductile pattern and then turns into a brittle cleavage. In the REC model, the atomic decohesion occurs at the crack tip to create a new free surface which directly induces a brittle cleavage. A ductile to brittle transition is observed which mainly depends on the competition between dislocation motion and crack growth. This competition mechanism is found to be correlated with the TB spacing. The critical values are 10 nm and 13.5 nm for this transition in LEC and REC models, respectively. Essentially, the dislocation densities affected by the TB spacing play a crucial role in the ductile to brittle transition.

Description: Plant factories have attracted increasing attention because they can produce fresh fruits and vegetables free from pesticides in all weather. However, the emission spectra from current light sources significantly mismatch the spectra absorbed by plants. We demonstrate a concept of using multiple broad-band as well as narrow-band solid-state lighting technologies to design plant-growth light sources. Take an organic light-emitting diode (OLED), for example; the resulting light source shows an 84% resemblance with the photosynthetic action spectrum as a twin-peak blue dye and a diffused mono-peak red dye are employed. This OLED can also show a greater than 90% resemblance as an additional deeper red emitter is added. For a typical LED, the resemblance can be improved to 91% if two additional blue and red LEDs are incorporated. The approach may facilitate either an ideal use of the energy applied for plant growth and/or the design of better light sources for growing different plants.

Description: Reliable data transmission over lossy communication link is expensive due to overheads for error protection. For signals that have inherent sparse structures, compressive sensing (CS) is applied to facilitate efficient sparse signal transmissions over lossy communication links without data compression or error protection. The natural packet loss in the lossy link is modeled as a random sampling process of the transmitted data, and the original signal will be reconstructed from the lossy transmission results using the CS-based reconstruction method at the receiving end. The impacts of packet lengths on transmission efficiency under different channel conditions have been discussed, and interleaving is incorporated to mitigate the impact of burst data loss. Extensive simulations and experiments have been conducted and compared to the traditional automatic repeat request (ARQ) interpolation technique, and very favorable results have been observed in terms of both accuracy of the reconstructed signals and the transmission energy consumption. Furthermore, the packet length effect provides useful insights for using compressed sensing for efficient sparse signal transmission via lossy links.

Description: A model for simulating vertical water level fluctuations with coupled liquid and gas phases is presented. The Preissmann implicit scheme is used to linearize the governing equations for one-dimensional transient flow for both liquid and gas phases, and the linear system is solved using the chasing method. Some classical cases for single liquid and gas phase transients in pipelines and networks are studied to verify that the proposed methods are accurate and reliable. The implicit scheme is extended using a dynamic mesh to simulate the water level fluctuations in a U-tube and an open surge tank without consideration of the gas phase. Methods of coupling liquid and gas phases are presented and used for studying the transient process and interaction between the phases, for gas phase limited in a chamber and gas phase transported in a pipeline. In particular, two other simplified models, one neglecting the effect of the gas phase on the liquid phase and the other one coupling the liquid and gas phases asynchronously, are proposed. The numerical results indicate that the asynchronous model performs better, and are finally applied to a hydropower station with surge tanks and air shafts to simulate the water level fluctuations and air speed.

Description: Secondary organic aerosol formation from photochemical aging of light-duty gasoline vehicle exhausts in a smog chamber Atmospheric Chemistry and Physics, 15, 9049-9062, 2015 Author(s): T. Liu, X. Wang, W. Deng, Q. Hu, X. Ding, Y. Zhang, Q. He, Z. Zhang, S. Lü, X. Bi, J. Chen, and J. Yu In China, a rapid increase in passenger vehicles has led to the growing concern of vehicle exhaust as an important source of anthropogenic secondary organic aerosol (SOA) in megacities hard hit by haze. In this study, the SOA formation of emissions from two idling light-duty gasoline vehicles (LDGVs) (Euro 1 and Euro 4) operated in China was investigated in a 30 m 3 smog chamber. Five photo-oxidation experiments were carried out at 25 °C with relative humidity at around 50 %. After aging at an OH exposure of 5 × 10 6 molecules cm −3 h, the formed SOA was 12–259 times as high as primary organic aerosol (POA). The SOA production factors (PF) were 0.001–0.044 g kg −1 fuel, comparable with those from the previous studies at comparable OH exposure. This quite lower OH exposure than that in typical atmospheric conditions might however lead to the underestimation of the SOA formation potential from LDGVs. Effective SOA yields in this study were well fit by a one-product gas-particle partitioning model but quite lower than those of a previous study investigating SOA formation from three idling passenger vehicles (Euro 2–4). Traditional single-ring aromatic precursors and naphthalene could explain 51–90 % of the formed SOA. Unspeciated species such as branched and cyclic alkanes might be the possible precursors for the unexplained SOA. A high-resolution time-of-flight aerosol mass spectrometer was used to characterize the chemical composition of SOA. The relationship between f 43 (ratio of m/z 43, mostly C 2 H 3 O + , to the total signal in mass spectrum) and f 44 (mostly CO 2 + ) of the gasoline vehicle exhaust SOA is similar to the ambient semi-volatile oxygenated organic aerosol (SV-OOA). We plot the O : C and H : C molar ratios of SOA in a Van Krevelen diagram. The slopes of ΔH : C / ΔO : C ranged from −0.59 to −0.36, suggesting that the oxidation chemistry in these experiments was a combination of carboxylic acid and alcohol/peroxide formation.

Description: Patients with a polyherbal prescription are more likely to receive duplicate medications and thus suffer from adverse drug reactions. We conducted a population-based retrospective study to examine the items of Chinese herbal medicine (CHM) per prescription in the ambulatory care of traditional Chinese medicine (TCM) in Taiwan. We retrieved complete TCM ambulatory visit datasets for 2010 from the National Health Insurance database in Taiwan. A total of 59,790 patients who received 313,482 CHM prescriptions were analyzed. Drug prescriptions containing more than five drugs were classified as polyherbal prescriptions; 41.6% of patients were given a polyherbal prescription. There were on average 5.2 ± 2.5 CHMs: 2.3 ± 1.1 compound herbal formula items, and 3.0 ± 2.5 single Chinese herb items in a single prescription. Approximately 4.6% of patients were prescribed 10 CHMs or more. Men had a lower odds ratio (OR) among polyherbal prescriptions (OR = 0.96, 95% confidence interval [CI] 0.92–0.99), and middle-aged patients (35–49 years) had the highest frequency of polyherbal prescription (OR = 1.19, 95% CI = 1.13–1.26). Patients with neoplasm, skin and subcutaneous tissue disease, or genitourinary system disease were more likely to have a polyherbal prescription; OR = 2.20 (1.81–2.67), 1.65 (1.50–1.80), and 1.52 (1.40–1.64), respectively. Polyherbal prescription is widespread in TCM in Taiwan. Potential herb interactions and iatrogenic risks associated with polyherbal prescriptions should be monitored.

Description: Atmospheric concentrations of carbon dioxide (CO2), a major cause of global warming, have been rising due to industrial development. Carbon capture and storage (CCS), which is regarded as the most effective way to reduce such atmospheric CO2 concentrations, has several environmental and technical disadvantages. Carbon capture and utilization (CCU), which has been introduced to cover such disadvantages, makes it possible to capture CO2, recycling byproducts as resources. However, CCU also requires large amounts of energy in order to induce reactions. Among existing CCU technologies, the process for converting CO2 into CaCO3 requires high temperature and high pressure as reaction conditions. This study proposes a method to fixate CaCO3 stably by using relatively less energy than existing methods. After forming NaOH absorbent solution through electrolysis of NaCl in seawater, CaCO3 was precipitated at room temperature and pressure. Following the experiment, the resulting product CaCO3 was analyzed with Fourier transform infrared spectroscopy (FT-IR); field emission scanning electron microscopy (FE-SEM) image and X-ray diffraction (XRD) patterns were also analyzed. The results showed that the CaCO3 crystal product was high-purity calcite. The study shows a successful method for fixating CO2 by reducing carbon dioxide released into the atmosphere while forming high-purity CaCO3.

Description: Bone substitute materials have witnessed tremendous development over the past decades and autogenous bone may still be considered the gold standard for many clinicians and clinical approaches in order to rebuild and restore bone defects. However, a plethora of novel xenogenic and synthetic bone substitute materials have been introduced in recent years in the field of bone regeneration. As the development of bone is actually a calcification process within a collagen fiber arrangement, the use of scaffolds in the formation of fibers may offer some advantages, along with additional handling characteristics. This review focuses on material characteristics and degradation behavior of electrospun biodegradable polyester scaffolds. Furthermore, we concentrated on the preclinical in vivo performance with regard to bone regeneration in preclinical studies. The major findings are as follows: Scaffold composition and architecture determine its biological behavior and degradation characteristics; The incorporation of inorganic substances and/or organic substances within composite scaffolds enhances new bone formation; L-poly(lactic acid) and poly(lactic-co-glycolic acid) composite scaffolds, especially when combined with basic substances like hydroxyapatite, tricalcium phosphate or demineralized bone powder, seem not to induce inflammatory tissue reactions in vivo.

Description: Semi-conducting poly(n-methylaniline) (PNMA)-coated poly(methyl methacrylate) (PMMA) composite nanoparticles were synthesized using cross-linked and grafted PMMA particles as a core, and then, the PNMA shell was coated via chemical oxidative polymerization on the surface of modified PMMA nanoparticles. Their electroresponsive electrorheological characteristics when dispersed in silicone were confirmed under applied electric fields using a rotational rheometer, focusing on their viscoelastic response. Using a frequency sweep test, the frequency dependence of both the storage and loss moduli was confirmed to increase upon increasing the electric field, with a stable plateau regime over the entire angular frequency range.

Description: Nitrogen export from a boreal stream network following forest harvesting: seasonal nitrate removal and conservative export of organic forms Biogeosciences Discussions, 12, 12061-12089, 2015 Author(s): J. Schelker, R. Sponseller, E. Ring, L. Högbom, S. Löfgren, and H. Laudon Boreal streams are under pressure from large scale disturbance by forestry. Recent scenarios predict an increase in forest production in Scandinavia to meet market demands and to mitigate higher anthropogenic CO 2 emissions. Increased fertilization and shorter forest rotations are anticipated which will likely enhance the pressure on boreal streams in the near future. Among the major environmental impacts of forest harvesting is the increased mobilization of inorganic nitrogen (N), primarily as nitrate (NO 3 - ) into surface waters. But whereas NO 3 - inputs to first-order streams have been previously described, their downstream fate and impact is not well understood. We evaluated the downstream fate of N inputs in a boreal landscape that has been altered by forest harvests over a 10 year period to estimate the effects of multiple clear-cuts on aquatic N export in a boreal stream network. Small streams showed substantial leaching of NO 3 - in response to harvests with concentrations increasing by ~ 15 fold. NO 3 - concentrations at two sampling stations further downstream in the network were strongly seasonal and increased significantly in response to harvesting at the medium size, but not at the larger stream. Nitrate removal efficiency, E r , calculated as the percentage of "forestry derived" NO 3 - that was retained within the landscape using a mass balance model was highest during the snow melt season followed by the growing season, but declined continuously throughout the dormant season. In contrast, export of organic N from the landscape indicated little removal and was essentially conservative. Overall, net removal of NO 3 - between 2008 and 2011 accounted for ~ 70 % of the total NO 3 - mass exported from harvested patches distributed across the landscape. These results highlight the capacity and limitation of N-limited terrestrial and aquatic ecosystems to buffer inorganic N mobilization that arises from multiple clear-cuts within meso-scale boreal watersheds.

Description: Uncertainties in global aerosols and climate effects due to biofuel emissions Atmospheric Chemistry and Physics, 15, 8577-8596, 2015 Author(s): J. K. Kodros, C. E. Scott, S. C. Farina, Y. H. Lee, C. L'Orange, J. Volckens, and J. R. Pierce Aerosol emissions from biofuel combustion impact both health and climate; however, while reducing emissions through improvements to combustion technologies will improve health, the net effect on climate is largely unconstrained. In this study, we examine sensitivities in global aerosol concentration, direct radiative climate effect, and cloud-albedo aerosol indirect climate effect to uncertainties in biofuel emission factors, optical mixing state, and model nucleation and background secondary organic aerosol (SOA). We use the Goddard Earth Observing System global chemical-transport model (GEOS-Chem) with TwO Moment Aerosol Sectional (TOMAS) microphysics. The emission factors include amount, composition, size, and hygroscopicity, as well as optical mixing-state properties. We also evaluate emissions from domestic coal use, which is not biofuel but is also frequently emitted from homes. We estimate the direct radiative effect assuming different mixing states (homogeneous, core-shell, and external) with and without absorptive organic aerosol (brown carbon). We find the global-mean direct radiative effect of biofuel emissions ranges from −0.02 to +0.06 W m −2 across all simulation/mixing-state combinations with regional effects in source regions ranging from −0.2 to +0.8 W m −2 . The global-mean cloud-albedo aerosol indirect effect (AIE) ranges from +0.01 to −0.02 W m −2 with regional effects in source regions ranging from −1.0 to −0.05 W m −2 . The direct radiative effect is strongly dependent on uncertainties in emissions mass, composition, emissions aerosol size distributions, and assumed optical mixing state, while the indirect effect is dependent on the emissions mass, emissions aerosol size distribution, and the choice of model nucleation and secondary organic aerosol schemes. The sign and magnitude of these effects have a strong regional dependence. We conclude that the climate effects of biofuel aerosols are largely unconstrained, and the overall sign of the aerosol effects is unclear due to uncertainties in model inputs. This uncertainty limits our ability to introduce mitigation strategies aimed at reducing biofuel black carbon emissions in order to counter warming effects from greenhouse gases. To better understand the climate impact of particle emissions from biofuel combustion, we recommend field/laboratory measurements to narrow constraints on (1) emissions mass, (2) emission size distribution, (3) mixing state, and (4) ratio of black carbon to organic aerosol.

Description: The Ice Selective Inlet: a novel technique for exclusive extraction of pristine ice crystals in mixed-phase clouds Atmospheric Measurement Techniques, 8, 3087-3106, 2015 Author(s): P. Kupiszewski, E. Weingartner, P. Vochezer, M. Schnaiter, A. Bigi, M. Gysel, B. Rosati, E. Toprak, S. Mertes, and U. Baltensperger Climate predictions are affected by high uncertainties partially due to an insufficient knowledge of aerosol–cloud interactions. One of the poorly understood processes is formation of mixed-phase clouds (MPCs) via heterogeneous ice nucleation. Field measurements of the atmospheric ice phase in MPCs are challenging due to the presence of much more numerous liquid droplets. The Ice Selective Inlet (ISI), presented in this paper, is a novel inlet designed to selectively sample pristine ice crystals in mixed-phase clouds and extract the ice residual particles contained within the crystals for physical and chemical characterization. Using a modular setup composed of a cyclone impactor, droplet evaporation unit and pumped counterflow virtual impactor (PCVI), the ISI segregates particles based on their inertia and phase, exclusively extracting small ice particles between 5 and 20 μm in diameter. The setup also includes optical particle spectrometers for analysis of the number size distribution and shape of the sampled hydrometeors. The novelty of the ISI is a droplet evaporation unit, which separates liquid droplets and ice crystals in the airborne state, thus avoiding physical impaction of the hydrometeors and limiting potential artefacts. The design and validation of the droplet evaporation unit is based on modelling studies of droplet evaporation rates and computational fluid dynamics simulations of gas and particle flows through the unit. Prior to deployment in the field, an inter-comparison of the optical particle size spectrometers and a characterization of the transmission efficiency of the PCVI was conducted in the laboratory. The ISI was subsequently deployed during the Cloud and Aerosol Characterization Experiment (CLACE) 2013 and 2014 – two extensive international field campaigns encompassing comprehensive measurements of cloud microphysics, as well as bulk aerosol, ice residual and ice nuclei properties. The campaigns provided an important opportunity for a proof of concept of the inlet design. In this work we present the setup of the ISI, including the modelling and laboratory characterization of its components, as well as field measurements demonstrating the ISI performance and validating the working principle of the inlet. Finally, measurements of biological aerosol during a Saharan dust event (SDE) are presented, showing a first indication of enrichment of bio-material in sub-2 μm ice residuals.

Description: Impacts on wave-driven harbour agitation due to climate change in Catalan ports Natural Hazards and Earth System Science, 15, 1695-1709, 2015 Author(s): J. P. Sierra, M. Casas-Prat, M. Virgili, C. Mösso, and A. Sánchez-Arcilla The objective of the present work is to analyse how changes in wave patterns due to the effect of climate change can affect harbour agitation (oscillations within the port due to wind waves). The study focuses on 13 harbours located on the Catalan coast (NW Mediterranean) using a methodology with general applicability. To obtain the patterns of agitation, a Boussinesq-type model is used, which is forced at the boundaries by present/future offshore wave conditions extracted from recently developed high-resolution wave projections in the NW Mediterranean. These wave projections were obtained with the SWAN model forced by present/future surface wind fields projected, respectively, by five different combinations of global and regional circulation models (GCMs and RCMs) for the A1B scenario. The results show a general slight reduction in the annual average agitation for most of the ports, except for the northernmost and southernmost areas of the region, where a slight increase is obtained. A seasonal analysis reveals that the tendency to decrease is accentuated in winter. However, the inter-model variability is large for both the winter and the annual analysis. Conversely, a general increase with a larger agreement among models is found during summer, which is the period with greater activity in most of the studied ports (marinas). A qualitative assessment of the factors of variability seems to indicate that the choice of GCM tends to affect the spatial pattern, whereas the choice of RCM induces a more homogeneous bias over the regional domain.

Description: The effect of fuel composition on gasification process performance was investigated by performing mass and energy balances on a pre-pilot scale bubbling fluidized bed reactor fed with mixtures of plastic waste, wood, and coal. The fuels containing plastic waste produced less H2, CO, and CO2 and more light hydrocarbons than the fuels including biomass. The lower heating value (LHV) progressively increased from 5.1 to 7.9 MJ/Nm3 when the plastic waste fraction was moved from 0% to 100%. Higher carbonaceous fines production was associated with the fuel containing a large fraction of coal (60%), producing 87.5 g/kgFuel compared to only 1.0 g/kgFuel obtained during the gasification test with just plastic waste. Conversely, plastic waste gasification produced the highest tar yield, 161.9 g/kgFuel, while woody biomass generated only 13.4 g/kgFuel. Wood gasification showed a carbon conversion efficiency (CCE) of 0.93, while the tests with two fuels containing coal showed lowest CCE values (0.78 and 0.70, respectively). Plastic waste and wood gasification presented similar cold gas efficiency (CGE) values (0.75 and 0.76, respectively), while that obtained during the co-gasification tests varied from 0.53 to 0.73.

Description: This paper introduces a new simple system with a butterfly chaotic attractor. This system has rich and complex dynamics. With some typical parameters, its Lyapunov dimension is greater than other known three dimensional chaotic systems. It exhibits chaotic behavior over a large range of parameters, and the divergence of flow of this system is not a constant. The dynamics of this new system are analyzed via Lyapunov exponent spectrum, bifurcation diagrams, phase portraits and the Poincaré map. The compound structures of this new system are also analyzed. By means of topological horseshoe theory and numerical computation, the Poincaré map defined for the system is proved to be semi-conjugate to 3-shift map, and thus the system has positive topological entropy.

Description: In this paper, the problem of robust control of nonlinear fractional-order systems in the presence of uncertainties and external disturbance is investigated. Fuzzy logic systems are used for estimating the unknown nonlinear functions. Based on the fractional Lyapunov direct method and some proposed Lemmas, an adaptive fuzzy controller is designed. The proposed method can guarantee all the signals in the closed-loop systems remain bounded and the tracking errors converge to an arbitrary small region of the origin. Lastly, an illustrative example is given to demonstrate the effectiveness of the proposed results.

Description: This paper proposes a resonant electric cradle design with infant cries recognition, employing an Arduino UNO as the core processor. For most commercially available electric cradles, the drive motor is closely combined with the bearing on the top, resulting in a lot of energy consumption. In this proposal, a ball bearing design was adopted and the driving force is under the cradle to increase the distance from the object to fulcrum and torque. The sensors are designed to detect the oscillation state, and then the force is driven at the critical time to achieve the maximum output response while saving energy according to the principle of resonance. As for the driving forces, the winding power and motors are carefully placed under the cradle. The sensors, including the three-axis accelerometer and infrared sensor, are tested and applied under swinging amplitude control. In addition, infant cry recognition technology was incorporated in the design to further develop its functionality, which is a rare feature in this kind of hardware. The proposed nonlinear operator of fundamental frequency ( ) analysis is able to identify different types of infant cries. In conclusion, this paper proposes an energy-saving electric cradle with infant cries recognition and the experimental results demonstrate the effectiveness of this approach.

Description: Many people find that their sleep is restricted or disturbed by social obligations, including work. Sleep phase delays can affect an individual’s circadian rhythms on the following day and cause daytime sleepiness and/or poor performance. In this study, to examine weekly variations in sleep patterns, we analyzed sleep data for seven-day periods (from Sunday to Saturday) that had been collected from 2914 subjects (aged 20–79 years) over a total of 24,899 subject-weeks using contactless biomotion sensors. On the weekend, the subjects’ mean sleep midpoint, bedtime, and wake-up time were delayed by 40, 26 and 53 min, respectively, compared with those seen on weekdays. In addition, on weekdays, the mean difference between the maximum and median sleep midpoint ranged from 35 to 47 min among the subjects in their 20 s–70 s. The weekend delay and weekday variation in the subjects’ sleep patterns tended to decrease with age. This study detected sleep pattern disturbances on both weekdays and weekends. The serial changes in weekday bedtimes detected in this study suggest that sleep habits are influenced by changes in the temporal patterns of social activities/duties. We need further study the advantages of getting extra sleep and the disadvantages of sleep pattern disturbances in daily lifestyle.

Description: Free acidity of aqueous solutions was initially defined in 1909 by Søren Peter Lauritz Sørensen as pH = −lgcH+ (c/mol·dm−3 or m/mol·kg−1 of the free hydrogen ions in solution, H+) soon (1910) was changed to pH = paH+ = −lgaH+, integrating the new concepts of activity, ai and activity coefficient γi, for the ionic species i under concern, H+ in this case; it is ai = −lg(miγi). Since individual ions do not exist alone in solution, primary pH values cannot be assigned solely by experimental measurements, requiring extra thermodynamic model assumptions for the activity coefficient, γH+, which has put pH in a unique situation of not being fully traceable to the International System of Units (SI). Also the concept of activity is often not felt to be as perceptible as that of concentration which may present difficulties, namely with the interpretation of data. pH measurements on unknown samples rely on calibration of the measuring setup with adequate reference pH buffers. In this work, the assignment of pH values to buffers closely matching the samples, e.g., seawater, is revisited. An approach is presented to assess the quantity pmH+ = −lgmH+ profiting from the fact that, contrary to single ion activity coefficients, mean activity coefficients,   can be assessed based on experimentally assessed quantities alone, γExp ±, thus ensuring traceability to the mole, the SI base unit for amount of substance. Compatibility between γExp ± and mean activity coefficient calculated by means of Pitzer model equations, γPtz ±, validates the model for its intended use.

Description: Utilisation of CryoSat-2 SAR altimeter in operational ice charting The Cryosphere Discussions, 9, 4117-4145, 2015 Author(s): E. Rinne and M. Similä We present methods to utilise Cryosat-2 (CS-2) Synthetic Aperture (SAR) mode data in operational ice charting. We compare CS-2 data qualitatively to Synthetic Aperture Radar (SAR) mosaics over Barents and Kara seas. Furthermore, we compare the CS-2 to archived operational ice charts. We present distributions of four CS-2 waveform parameters for different ice types as presented in the ice charts. We go on to present an automatic classification method for CS-2 data which, after training with operational ice charts, is capable of determining open water from ice with a hit rate of 〉 90 %. The training data is dynamically updated every five days using the most recent 15 days CS-2 data and operative ice charts. This helps the adaption of the classifier to the evolving ice/snow conditions throughout winter. The classifier is also capable of detecting three different ice classes (thin and thick first year ice as well as old ice) with success rates good enough for the output to be usable to support operational ice charting. Finally, we present a near real time CS-2 product just plotting the waveform characteristics and conclude that even such a simple product is usable for some of the needs of ice charting.

Description: Currently deep learning has made great breakthroughs in visual and speech processing, mainly because it draws lessons from the hierarchical mode that brain deals with images and speech. In the field of NLP, a topic model is one of the important ways for modeling documents. Topic models are built on a generative model that clearly does not match the way humans write. In this paper, we propose Event Model, which is unsupervised and based on the language processing mechanism of neurolinguistics, to model documents. In Event Model, documents are descriptions of concrete or abstract events seen, heard, or sensed by people and words are objects in the events. Event Model has two stages: word learning and dimensionality reduction. Word learning is to learn semantics of words based on deep learning. Dimensionality reduction is the process that representing a document as a low dimensional vector by a linear mode that is completely different from topic models. Event Model achieves state-of-the-art results on document retrieval tasks.

Description: Inverse modeling of black carbon emissions over China using ensemble data assimilation Atmospheric Chemistry and Physics Discussions, 15, 20851-20879, 2015 Author(s): P. Wang, H. Wang, Y. Q. Wang, X. Y. Zhang, S. L. Gong, M. Xue, C. H. Zhou, H. L. Liu, X. Q. An, T. Niu, and Y. L. Chen Emissions inventories of black carbon (BC), which are traditionally constructed using a "bottom-up" approach based on activity data and emissions factors, are considered to contain a large level of uncertainty. In this paper, an ensemble optimal interpolation (EnOI) data assimilation technique is used to investigate the possibility of optimally recovering the spatially resolved emissions bias of BC. An inverse modeling system for emissions is established for an atmospheric chemistry aerosol model and two key problems related to ensemble data assimilation in the top-down emissions estimation are discussed: (1) how to obtain reasonable ensembles of prior emissions; and (2) establishing a scheme to localize the background-error matrix. An experiment involving a one month simulation cycle with EnOI inversion of BC emissions is performed for January 2008. The bias of the BC emissions intensity in China at each grid point is corrected by this inverse system. The inversed emission over China in January is 240.1 Gg, and annual emission is about 2750 Gg, which is over 1.8 times of bottom-up emission inventory. The results show that, even though only monthly mean BC measurements are employed to inverse the emissions, the accuracy of the daily model simulation improves. Using top-down emissions, the average root-mean-square error of simulated daily BC is decreased by nearly 30 %. These results are valuable and promising for a better understanding of aerosol emissions and distributions, as well as aerosol forecasting.

Description: Metrology of ground-based satellite validation: co-location mismatch and smoothing issues of total ozone comparisons Atmospheric Measurement Techniques Discussions, 8, 8023-8082, 2015 Author(s): T. Verhoelst, J. Granville, F. Hendrick, U. Köhler, C. Lerot, J.-P. Pommereau, A. Redondas, M. Van Roozendael, and J.-C. Lambert Comparisons with ground-based correlative measurements constitute a key component in the validation of satellite data on atmospheric composition. The error budget of these comparisons contains not only the measurement uncertainties but also several terms related to differences in sampling and smoothing of the inhomogeneous and variable atmospheric field. A versatile system for Observing System Simulation Experiments (OSSEs), named OSSSMOSE, is used here to quantify these terms. Based on the application of pragmatic observation operators onto high-resolution atmospheric fields, it allows a simulation of each individual measurement, and consequently also of the differences to be expected from spatial and temporal field variations between both measurements making up a comparison pair. As a topical case study, the system is used to evaluate the error budget of total ozone column (TOC) comparisons between on the one hand GOME-type direct fitting (GODFITv3) satellite retrievals from GOME/ERS2, SCIAMACHY/Envisat, and GOME-2/MetOp-A, and on the other hand direct-sun and zenith-sky reference measurements such as from Dobsons, Brewers, and zenith scattered light (ZSL-)DOAS instruments respectively. In particular, the focus is placed on the GODFITv3 reprocessed GOME-2A data record vs. the ground-based instruments contributing to the Network for the Detection of Atmospheric Composition Change (NDACC). The simulations are found to reproduce the actual measurements almost to within the measurement uncertainties, confirming that the OSSE approach and its technical implementation are appropriate. This work reveals that many features of the comparison spread and median difference can be understood as due to metrological differences, even when using strict co-location criteria. In particular, sampling difference errors exceed measurement uncertainties regularly at most mid- and high-latitude stations, with values up to 10 % and more in extreme cases. Smoothing difference errors only play a role in the comparisons with ZSL-DOAS instruments at high latitudes, especially in the presence of a polar vortex. At tropical latitudes, where TOC variability is lower, both types of errors remain below about 1 % and consequently do not contribute significantly to the comparison error budget. The detailed analysis of the comparison results, including now the metrological errors, suggests that the published random measurement uncertainties for GODFITv3 reprocessed satellite data are potentially overestimated, and adjustments are proposed here. This successful application of the OSSSMOSE sytem to close for the first time the error budget of TOC comparisons, bodes well for potential future applications, which are briefly touched upon.

Description: Relating seasonal dynamics of enhanced vegetation index to the recycling of water in two endorheic river basins in north-west China Hydrology and Earth System Sciences, 19, 3387-3403, 2015 Author(s): M. A. Matin and C. P.-A. Bourque This study associates the dynamics of enhanced vegetation index in lowland desert oases to the recycling of water in two endorheic (hydrologically closed) river basins in Gansu Province, north-west China, along a gradient of elevation zones and land cover types. Each river basin was subdivided into four elevation zones representative of (i) oasis plains and foothills, and (ii) low-, (iii) mid-, and (iv) high-mountain elevations. Comparison of monthly vegetation phenology with precipitation and snowmelt dynamics within the same basins over a 10-year period (2000–2009) suggested that the onset of the precipitation season (cumulative % precipitation 〉 7–8 %) in the mountains, typically in late April to early May, was triggered by the greening of vegetation and increased production of water vapour at the base of the mountains. Seasonal evolution of in-mountain precipitation correlated fairly well with the temporal variation in oasis-vegetation coverage and phenology characterised by monthly enhanced vegetation index, yielding coefficients of determination of 0.65 and 0.85 for the two basins. Convergent cross-mapping of related time series indicated bi-directional causality (feedback) between the two variables. Comparisons between same-zone monthly precipitation amounts and enhanced vegetation index provided weaker correlations. Start of the growing season in the oases was shown to coincide with favourable spring warming and discharge of meltwater from low- to mid-elevations of the Qilian Mountains (zones 1 and 2) in mid-to-late March. In terms of plant requirement for water, mid-seasonal development of oasis vegetation was seen to be controlled to a greater extent by the production of rain in the mountains. Comparison of water volumes associated with in-basin production of rainfall and snowmelt with that associated with evaporation seemed to suggest that about 90 % of the available liquid water (i.e. mostly in the form of direct rainfall and snowmelt in the mountains) was recycled locally.

Description: Investigating suspended sediment dynamics in contrasting agricultural catchments using ex situ turbidity-based suspended sediment monitoring Hydrology and Earth System Sciences, 19, 3349-3363, 2015 Author(s): S. C. Sherriff, J. S. Rowan, A. R. Melland, P. Jordan, O. Fenton, and D. Ó hUallacháin Soil erosion and suspended sediment (SS) pose risks to chemical and ecological water quality. Agricultural activities may accelerate erosional fluxes from bare, poached or compacted soils, and enhance connectivity through modified channels and artificial drainage networks. Storm-event fluxes dominate SS transport in agricultural catchments; therefore, high temporal-resolution monitoring approaches are required, but can be expensive and technically challenging. Here, the performance of in situ turbidity sensors, conventionally installed submerged at the river bankside, is compared with installations where river water is delivered to sensors ex situ, i.e. within instrument kiosks on the riverbank, at two experimental catchments (Grassland B and Arable B). The in situ and ex situ installations gave comparable results when calibrated against storm-period, depth-integrated SS data, with total loads at Grassland B estimated at 12 800 and 15 400 t, and 22 600 and 24 900 t at Arable B, respectively. The absence of spurious turbidity readings relating to bankside debris around the in situ sensor and its greater security make the ex situ sensor more robust. The ex situ approach was then used to characterise SS dynamics and fluxes in five intensively managed agricultural catchments in Ireland which feature a range of landscape characteristics and land use pressures. Average annual suspended sediment concentration (SSC) was below the Freshwater Fish Directive (78/659/EEC) guideline of 25 mg L −1 , and the continuous hourly record demonstrated that exceedance occurred less than 12 % of the observation year. Soil drainage class and proportion of arable land were key controls determining flux rates, but all catchments reported a high degree of inter-annual variability associated with variable precipitation patterns compared to the long-term average. Poorly drained soils had greater sensitivity to runoff and soil erosion, particularly in catchments with periods of bare soils. Well drained soils were less sensitive to erosion even on arable land; however, under extreme rainfall conditions, all bare soils remain a high sediment loss risk. Analysis of storm-period and seasonal dynamics (over the long term) using high-resolution monitoring would be beneficial to further explore the impact of landscape, climate and land use characteristics on SS export.

Description: Landscape heterogeneity drives contrasting concentration–discharge relationships in shale headwater catchments Hydrology and Earth System Sciences, 19, 3333-3347, 2015 Author(s): E. M. Herndon, A. L. Dere, P. L. Sullivan, D. Norris, B. Reynolds, and S. L. Brantley Solute concentrations in stream water vary with discharge in patterns that record complex feedbacks between hydrologic and biogeochemical processes. In a comparison of three shale-underlain headwater catchments located in Pennsylvania, USA (the forested Shale Hills Critical Zone Observatory), and Wales, UK (the peatland-dominated Upper Hafren and forest-dominated Upper Hore catchments in the Plynlimon forest), dissimilar concentration–discharge ( C – Q ) behaviors are best explained by contrasting landscape distributions of soil solution chemistry – especially dissolved organic carbon (DOC) – that have been established by patterns of vegetation and soil organic matter (SOM). Specifically, elements that are concentrated in organic-rich soils due to biotic cycling (Mn, Ca, K) or that form strong complexes with DOC (Fe, Al) are spatially heterogeneous in pore waters because organic matter is heterogeneously distributed across the catchments. These solutes exhibit non-chemostatic behavior in the streams, and solute concentrations either decrease (Shale Hills) or increase (Plynlimon) with increasing discharge. In contrast, solutes that are concentrated in soil minerals and form only weak complexes with DOC (Na, Mg, Si) are spatially homogeneous in pore waters across each catchment. These solutes are chemostatic in that their stream concentrations vary little with stream discharge, likely because these solutes are released quickly from exchange sites in the soils during rainfall events. Furthermore, concentration–discharge relationships of non-chemostatic solutes changed following tree harvest in the Upper Hore catchment in Plynlimon, while no changes were observed for chemostatic solutes, underscoring the role of vegetation in regulating the concentrations of certain elements in the stream. These results indicate that differences in the hydrologic connectivity of organic-rich soils to the stream drive differences in concentration behavior between catchments. As such, in catchments where SOM is dominantly in lowlands (e.g., Shale Hills), we infer that non-chemostatic elements associated with organic matter are released to the stream early during rainfall events, whereas in catchments where SOM is dominantly in uplands (e.g., Plynlimon), these non-chemostatic elements are released later during rainfall events. The distribution of SOM across the landscape is thus a key component for predictive models of solute transport in headwater catchments.

Description: Future changes in flash flood frequency and intensity of the Tha Di River (Thailand) based on rainfall–runoff modeling and advanced delta change scaling Hydrology and Earth System Sciences Discussions, 12, 7327-7352, 2015 Author(s): S. Hilgert, A. Wagner, and S. Fuchs As a consequence of climate change, extreme and flood-causing precipitation events are expected to increase in magnitude and frequency, especially in today's high-precipitation areas. During the north-east monsoon seasons, Nakhon Si Thammarat in southern Thailand is flash-flooded every 2.22 years on average. This study investigates frequency and intensity of harmful discharges of the Tha Di River regarding the IPCC emission scenarios A2 and B2. The regional climate model (RCM) PRECIS was transformed using the advanced delta change (ADC) method. The hydrologic response model HBV-Light was calibrated to the catchment and supplied with ADC-scaled daily precipitation and temperature data for 2010–2089. Under the A2 (B2) scenario, the flood threshold exceedance frequency on average increases by 133 % (decreases by 10 %), average flood intensity increases by 3 % (decreases by 2 %) and the annual top five discharge peaks intensities increase by 46 % (decrease by 5 %). Yearly precipitation sums increase by 30 % (10 %) towards the end of the century. The A2 scenario predicts a precipitation increase during the rainy season, which intensifies flood events; while increases projected exclusively for the dry season are not expected to cause floods. Retention volume demand of past events was calculated to be up to 12 × 10 6 m 3 . Flood risks are staying at high levels under the B2 scenario or increase dramatically under the A2 scenario. Results show that the RCM scaling process is inflicted with systematic biases but is crucial to investigate small, mountainous catchments. Improvement of scaling techniques should therefore accompany the development towards high-resolution climate models.

Description: A pan-African medium-range ensemble flood forecast system Hydrology and Earth System Sciences, 19, 3365-3385, 2015 Author(s): V. Thiemig, B. Bisselink, F. Pappenberger, and J. Thielen The African Flood Forecasting System (AFFS) is a probabilistic flood forecast system for medium- to large-scale African river basins, with lead times of up to 15 days. The key components are the hydrological model LISFLOOD, the African GIS database, the meteorological ensemble predictions by the ECMWF (European Centre for Medium-Ranged Weather Forecasts) and critical hydrological thresholds. In this paper, the predictive capability is investigated in a hindcast mode, by reproducing hydrological predictions for the year 2003 when important floods were observed. Results were verified by ground measurements of 36 sub-catchments as well as by reports of various flood archives. Results showed that AFFS detected around 70 % of the reported flood events correctly. In particular, the system showed good performance in predicting riverine flood events of long duration (〉 1 week) and large affected areas (〉 10 000 km 2 ) well in advance, whereas AFFS showed limitations for small-scale and short duration flood events. The case study for the flood event in March 2003 in the Sabi Basin (Zimbabwe) illustrated the good performance of AFFS in forecasting timing and severity of the floods, gave an example of the clear and concise output products, and showed that the system is capable of producing flood warnings even in ungauged river basins. Hence, from a technical perspective, AFFS shows a large potential as an operational pan-African flood forecasting system, although issues related to the practical implication will still need to be investigated.

Description: Gas adsorption and desorption effects on cylinders and their importance for long-term gas records Atmospheric Measurement Techniques Discussions, 8, 8083-8112, 2015 Author(s): M. C. Leuenberger, M. F. Schibig, and P. Nyfeler It is well known that gases adsorb on many surfaces, in particular metal surfaces. There are two main forms responsible for these effects (i) physisorption and (ii) chemisorption. Physisorption is associated with lower binding energies in the order of 1–10 kJ mol −1 compared to chemisorption ranging from 100 to 1000 kJ mol −1 . Furthermore, chemisorption forms only monolayers, contrasting physisorption that can form multilayer adsorption. The reverse process is called desorption and follows similar mathematical laws, however, it can be influenced by hysteresis effects. In the present experiment we investigated the adsorption/desorption phenomena on three steel and three aluminium cylinders containing compressed air in our laboratory and under controlled conditions in a climate chamber, respectively. We proved the pressure effect on physisorption for CO 2 , CH 4 and H 2 O by decanting one steel and two aluminium cylinders completely. The CO 2 results for both cylinders are in excellent agreement with the pressure dependence of a monolayer adsorption model. However, adsorption on aluminium ( 〈 0.05 and 0 ppm for CO 2 and H 2 O) was about 10 times less than on steel ( 〈 0.41 ppm and about 〈 2.5 ppm, respectively). The CO 2 amounts adsorbed (5.8 × 10 19 CO 2 molecules) corresponds to about the five-fold monolayer adsorption indicating that the effective surface exposed for adsorption is significantly larger than the geometric surface area. Adsorption/desorption effects were minimal for CH 4 and for CO. However, the latter dependence requires further attention since it was only studied on one aluminium cylinder with a very low mole fraction. In the climate chamber the cylinders were exposed to temperatures between −10 and +50 °C to determine the corresponding temperature coefficients of adsorption. Again, we found distinctly different values for CO 2 ranging from 0.0014 to 0.0184 ppm °C −1 for steel cylinders and −0.0002 to −0.0003 ppm °C −1 for aluminium cylinders. The reversed temperature dependence for aluminium cylinders point to significantly lower desorption energies than for steel cylinders and might at least partly be due to temperature and gas consumption induced pressure changes. Temperature coefficients for CH 4 , CO and H 2 O adsorption were, within their error bands, insignificant. These results do indicate the need for careful selection and usage of gas cylinders for high precision calibration purposes such as requested in trace gas applications.

Description: A two-layer canopy model with thermal inertia for an improved snowpack energy balance below needleleaf forest (model SNOWPACK, version 3.2.1, revision 741) Geoscientific Model Development, 8, 2379-2398, 2015 Author(s): I. Gouttevin, M. Lehning, T. Jonas, D. Gustafsson, and M. Mölder A new, two-layer canopy module with thermal inertia as part of the detailed snow model SNOWPACK (version 3.2.1) is presented and evaluated. As a by-product of these new developments, an exhaustive description of the canopy module of the SNOWPACK model is provided, thereby filling a gap in the existing literature. In its current form, the two-layer canopy module is suited for evergreen needleleaf forest, with or without snow cover. It is designed to reproduce the difference in thermal response between leafy and woody canopy elements, and their impact on the underlying snowpack or ground surface energy balance. Given the number of processes resolved, the SNOWPACK model with its enhanced canopy module constitutes a sophisticated physics-based modeling chain of the continuum going from atmosphere to soil through the canopy and snow. Comparisons of modeled sub-canopy thermal radiation to stand-scale observations at an Alpine site (Alptal, Switzerland) demonstrate improvements induced by the new canopy module. Both thermal heat mass and the two-layer canopy formulation contribute to reduce the daily amplitude of the modeled canopy temperature signal, in agreement with observations. Particularly striking is the attenuation of the nighttime drop in canopy temperature, which was a key model bias. We specifically show that a single-layered canopy model is unable to produce this limited temperature drop correctly. The impact of the new parameterizations on the modeled dynamics of the sub-canopy snowpack is analyzed. The new canopy module yields consistent results but the frequent occurrence of mixed-precipitation events at Alptal prevents a conclusive assessment of model performance against snow data. The new model is also successfully tested without specific tuning against measured tree temperature and biomass heat-storage fluxes at the boreal site of Norunda (Sweden). This provides an independent assessment of its physical consistency and stresses the robustness and transferability of the chosen parameterizations. The SNOWPACK code including the new canopy module, is available under Gnu General Public License (GPL) license and upon creation of an account at https://models.slf.ch/ .

Description: A comprehensive filtering scheme for high-resolution estimation of the water balance components from high-precision lysimeters Hydrology and Earth System Sciences, 19, 3405-3418, 2015 Author(s): M. Hannes, U. Wollschläger, F. Schrader, W. Durner, S. Gebler, T. Pütz, J. Fank, G. von Unold, and H.-J. Vogel Large weighing lysimeters are currently the most precise method to directly measure all components of the terrestrial water balance in parallel via the built-in weighing system. As lysimeters are exposed to several external forces such as management practices or wind influencing the weighing data, the calculated fluxes of precipitation and evapotranspiration can be altered considerably without having applied appropriate corrections to the raw data. Therefore, adequate filtering schemes for obtaining most accurate estimates of the water balance components are required. In this study, we use data from the TERENO (TERrestrial ENvironmental Observatories) SoilCan research site in Bad Lauchstädt to develop a comprehensive filtering procedure for high-precision lysimeter data, which is designed to deal with various kinds of possible errors starting from the elimination of large disturbances in the raw data resulting e.g., from management practices all the way to the reduction of noise caused e.g., by moderate wind. Furthermore, we analyze the influence of averaging times and thresholds required by some of the filtering steps on the calculated water balance and investigate the ability of two adaptive filtering methods (the adaptive window and adaptive threshold filter (AWAT filter; Peters et al., 2014), and a new synchro filter applicable to the data from a set of several lysimeters) to further reduce the filtering error. Finally, we take advantage of the data sets of all 18 lysimeters running in parallel at the Bad Lauchstädt site to evaluate the performance and accuracy of the proposed filtering scheme. For the tested time interval of 2 months, we show that the estimation of the water balance with high temporal resolution and good accuracy is possible. The filtering code can be downloaded from the journal website as Supplement to this publication.

Description: The multi-parameter character of supersymmetric dark-matter models implies the combination of their experimental studies with astrophysical and cosmological probes. The physics of the early Universe provides nontrivial effects of non-equilibrium particles and primordial cosmological structures. Primordial black holes (PBHs) are a profound signature of such structures that may arise as a cosmological consequence of supersymmetric (SUSY) models. SUSY-based mechanisms of baryosynthesis can lead to the possibility of antimatter domains in a baryon asymmetric Universe. In the context of cosmoparticle physics, which studies the fundamental relationship of the micro- and macro-worlds, the development of SUSY illustrates the main principles of this approach, as the physical basis of the modern cosmology provides cross-disciplinary tests in physical and astronomical studies.

Description: In this paper, we study a generalized Zakharov–Kuznetsov equation in three variables, which has applications in the nonlinear development of ion-acoustic waves in a magnetized plasma. Conservation laws for this equation are constructed for the first time by using the new conservation theorem of Ibragimov. Furthermore, new exact solutions are obtained by employing the Lie symmetry method along with the simplest equation method.

Description: At the center of core technologies for a future cyber world, such as Internet of Things (IoT) or big data, is a context-rich system that offers services by using situational information. The field where context-rich systems were first introduced is near-field communication (NFC)-based electronic payments. Near-field Communication (NFC) integrated payment services collect the payment information of the credit card and the location information to generate patterns in the user’s consumption or movement through big data technology. Based on such pattern information, tailored services, such as advertisement, are offered to users. However, there is difficulty in controlling access to personal information, as there is a collaborative relationship focused on the trusted service manager (TSM) that is close knit to shared personal information. Moreover, in the case of Hadoop, among the many big data analytical technologies, it offers access control functions, but not a way to authorize the processing of personal information, making it impossible to grant authority between service providers to process information. As such, this paper proposes a key generation and distribution method, as well as a secure communication protocol. The analysis has shown that the efficiency was greater for security and performance compared to relation works.

Description: Assimilation of Antarctic velocity observations provides evidence for uncharted pinning points The Cryosphere, 9, 1427-1443, 2015 Author(s): J. J. Fürst, G. Durand, F. Gillet-Chaulet, N. Merino, L. Tavard, J. Mouginot, N. Gourmelen, and O. Gagliardini In ice flow modelling, the use of control methods to assimilate the dynamic and geometric state of an ice body has become common practice. These methods have primarily focussed on inverting for one of the two least known properties in glaciology, namely the basal friction coefficient or the ice viscosity parameter. Here, we present an approach to infer both properties simultaneously for the whole of the Antarctic ice sheet. After the assimilation, the root-mean-square deviation between modelled and observed surface velocities attains 8.7 m a −1 for the entire domain, with a slightly higher value of 14.0 m a −1 for the ice shelves. An exception in terms of the velocity mismatch is the Thwaites Glacier Ice Shelf, where the RMS value is almost 70 m a −1 . The reason is that the underlying Bedmap2 geometry ignores the presence of an ice rise, which exerts major control on the dynamics of the eastern part of the ice shelf. On these grounds, we suggest an approach to account for pinning points not included in Bedmap2 by locally allowing an optimisation of basal friction during the inversion. In this way, the velocity mismatch on the ice shelf of Thwaites Glacier is more than halved. A characteristic velocity mismatch pattern emerges for unaccounted pinning points close to the marine shelf front. This pattern is exploited to manually identify seven uncharted features around Antarctica that exert significant resistance to the shelf flow. Potential pinning points are detected on Fimbul, West, Shackleton, Nickerson and Venable ice shelves. As pinning points can provide substantial resistance to shelf flow, with considerable consequences if they became ungrounded in the future, the model community is in need of detailed bathymetry there. Our data assimilation points to some of these dynamically important features not present in Bedmap2 and implicitly quantifies their relevance.

Description: We introduced an analysis to identify structural characterization of two-dimensional regular and amorphous networks. The analysis was shown to be reliable to determine the global network rigidity and can also identify local floppy regions in the mixture of rigid and floppy regions. The eigenmode analysis explores the structural properties of various networks determined by eigenvalue spectra. It is useful to determine the general structural stability of networks that the traditional Maxwell counting scheme based on the statistics of nodes (degrees of freedom) and bonds (constraints) does not provide. A visual characterization scheme was introduced to examine the local structure characterization of the networks. The eigenmode analysis is under development for various practical applications on more general network structures characterized by coordination numbers and nodal connectivity such as graphenes and proteins.

Description: Atomic force microscope with applicable types of operation in a liquid environment is widely used to scan the contours of biological specimens. The contact mode of operation allows a tip to touch a specimen directly but sometimes it damages the specimen; thus, a tapping mode of operation may replace the contact mode. The tapping mode triggers the cantilever of the microscope approximately at resonance frequencies, and so the tip periodically knocks the specimen. It is well known that the cantilever induces extra liquid pressure that leads to drift in the resonance frequency. Studies have noted that the heights of protein surfaces measured via the tapping mode of an atomic force microscope are ~25% smaller than those measured by other methods. This discrepancy may be attributable to the induced superficial hydrodynamic pressure, which is worth investigating. In this paper, we introduce a semi-analytical method to analyze the pressure distribution of various tip geometries. According to our analysis, the maximum hydrodynamic pressure on the specimen caused by a cone-shaped tip is ~0.5 Pa, which can, for example, pre-deform a cell by several nanometers in compression before the tip taps it. Moreover, the pressure calculated on the surface of the specimen is 20 times larger than the pressure without considering the tip effect; these results have not been motioned in other papers. Dominating factors, such as surface heights of protein surface, mechanical stiffness of protein increasing with loading velocity, and radius of tip affecting the local pressure of specimen, are also addressed in this study.

Description: This study explores the potential of Synthetic Aperture Radar (SAR) to aid Unmanned Aerial Vehicle (UAV) navigation when Inertial Navigation System (INS) measurements are not accurate enough to eliminate drifts from a planned trajectory. This problem can affect medium-altitude long-endurance (MALE) UAV class, which permits heavy and wide payloads (as required by SAR) and flights for thousands of kilometres accumulating large drifts. The basic idea is to infer position and attitude of an aerial platform by inspecting both amplitude and phase of SAR images acquired onboard. For the amplitude-based approach, the system navigation corrections are obtained by matching the actual coordinates of ground landmarks with those automatically extracted from the SAR image. When the use of SAR amplitude is unfeasible, the phase content can be exploited through SAR interferometry by using a reference Digital Terrain Model (DTM). A feasibility analysis was carried out to derive system requirements by exploring both radiometric and geometric parameters of the acquisition setting. We showed that MALE UAV, specific commercial navigation sensors and SAR systems, typical landmark position accuracy and classes, and available DTMs lead to estimated UAV coordinates with errors bounded within ±12 m, thus making feasible the proposed SAR-based backup system.

Description: This paper demonstrates an automated computer vision system for outdoor tree crop enumeration in a seedling nursery. The complete system incorporates both hardware components (including an embedded microcontroller, an odometry encoder, and an uncalibrated digital color camera) and software algorithms (including microcontroller algorithms and the proposed algorithm for tree crop enumeration) required to obtain robust performance in a natural outdoor environment. The enumeration system uses a three-step image analysis process based upon: (1) an orthographic plant projection method integrating a perspective transform with automatic parameter estimation; (2) a plant counting method based on projection histograms; and (3) a double-counting avoidance method based on a homography transform. Experimental results demonstrate the ability to count large numbers of plants automatically with no human effort. Results show that, for tree seedlings having a height up to 40 cm and a within-row tree spacing of approximately 10 cm, the algorithms successfully estimated the number of plants with an average accuracy of 95.2% for trees within a single image and 98% for counting of the whole plant population in a large sequence of images.

Description: Long-term coastal-polynya dynamics in the Southern Weddell Sea from MODIS thermal-infrared imagery The Cryosphere Discussions, 9, 3959-3993, 2015 Author(s): S. Paul, S. Willmes, and G. Heinemann Based upon high-resolution thermal-infrared Moderate-Resolution Imaging Spectroradiometer (MODIS) satellite imagery in combination with ERA-Interim atmospheric reanalysis data, we derived long-term polynya parameters such as polynya area, thin-ice thickness distribution and ice-production rates from daily cloud-cover corrected thin-ice thickness composites. Our study is based on a thirteen year investigation period (2002–2014) for the austral winter (1 April to 30 September) in the Antarctic Southern Weddell Sea. The focus lies on coastal polynyas which are important hot spots for new-ice formation, bottom-water formation and heat/moisture release into the atmosphere. MODIS has the capability to resolve even very narrow coastal polynyas. Its major disadvantage is the sensor limitation due to cloud cover. We make use of a newly developed and adapted spatial feature reconstruction scheme to account for cloud-covered areas. We find the sea-ice areas in front of Ronne and Brunt Ice Shelf to be the most active with an annual average polynya area of 3018 ± 1298 and 3516 ± 1420 km 2 as well as an accumulated volume ice production of 31 ± 13 and 31 ± 12 km 3 , respectively. For the remaining four regions, estimates amount to 421 ± 294 km 2 and 4 ± 3 km 3 (Antarctic Peninsula), 1148 ± 432 km 2 and 12 ± 5 km 3 (Iceberg A23A), 901 ± 703 km 2 and 10 ± 8 km 3 (Filchner Ice Shelf) as well as 499 ± 277 km 2 and 5 ± 2 km 3 (Coats Land). Our findings are discussed in comparison to recent studies based on coupled sea-ice/ocean models and passive-microwave satellite imagery, each investigating different parts of the Southern Weddell Sea.

Description: Climatic controls and climate proxy potential of Lewis Glacier, Mt Kenya The Cryosphere Discussions, 9, 3887-3924, 2015 Author(s): R. Prinz, L. I. Nicholson, T. Mölg, W. Gurgiser, and G. Kaser The Lewis Glacier on Mt Kenya is one of the best studied tropical glaciers and has experienced considerable retreat since a maximum extent in the late 19th century (L19). From distributed mass and energy balance modelling, this study evaluates the current sensitivity of the surface mass and energy balance to climatic drivers, explores climate conditions under which the L19 maximum extent might have sustained, and discusses the potential for using the glacier retreat to quantify climate change. Multiyear meteorological measurements at 4828 m provide data for input, optimization and evaluation of a spatially distributed glacier mass balance model to quantify the exchanges of energy and mass at the glacier–atmosphere interface. Currently the glacier loses mass due to the imbalance between insufficient accumulation and enhanced melt, because radiative energy gains cannot be compensated by turbulent energy sinks. Exchanging model input data with synthetic climate scenarios, which were sampled from the meteorological measurements and account for coupled climatic variable perturbations, reveal that the current mass balance is most sensitive to changes in atmospheric moisture (via its impact on solid precipitation, cloudiness and surface albedo). Positive mass balances result from scenarios with an increase of annual (seasonal) accumulation of 30 % (100 %), compared to values observed today, without significant changes in air temperature required. Scenarios with lower air temperatures are drier and associated with lower accumulation and increased net radiation due to reduced cloudiness and albedo. If the scenarios currently producing positive mass balances are applied to the L19 extent, negative mass balances are the result, meaning that the conditions required to sustain the glacier in its L19 extent are not reflected in today's observations. Alternatively, a balanced mass budget for the L19 extent can be explained by changing model parameters that imply a distinctly different coupling between the glacier's local surface-air layer and its surrounding boundary-layer. This result underlines the difficulty of deriving paleoclimates for larger glacier extents on the basis of modern measurements of small glaciers.

Description: Drainage networks are essential compartments in an urban infrastructure system for the efficient collection and prompt drainage of flood water. In addition to the advances in numerical techniques on urban flood simulation, the topological characteristics of urban drainage networks and their impacts on flooding have not been investigated thoroughly despite their importance. This study evaluated the urban drainage networks in Seoul, South Korea, in terms of the network configuration and its implication for peak flows and flood mitigation. Gibbs’ model was used to analyze the network configuration of 31 urban catchments with various slope ranges. The results showed that urban drainage networks can be less efficient than river in nature in terms of the drainage time, which is counter-intuitive. On the other hand, the analysis showed that efficient networks have risks of flood concentration and, hence, increase potential flood risks. This study showed that efficient networks tend to have higher peak flows at the outlet and vice versa. Therefore, an alternative drainage network layout, which is less efficient and more sinuous, was introduced and it resulted in reduced peak flows and flooding. This result shows managing a proper drainage network layout can contribute to flood mitigation in urban catchments.

Description: A Web-based spatial decision supporting system for land management and soil conservation Solid Earth, 6, 903-928, 2015 Author(s): F. Terribile, A. Agrillo, A. Bonfante, G. Buscemi, M. Colandrea, A. D'Antonio, R. De Mascellis, C. De Michele, G. Langella, P. Manna, L. Marotta, F. A. Mileti, L. Minieri, N. Orefice, S. Valentini, S. Vingiani, and A. Basile Today it is evident that there are many contrasting demands on our landscape (e.g. food security, more sustainable agriculture, higher income in rural areas, etc.) as well as many land degradation problems. It has been proved that providing operational answers to these demands and problems is extremely difficult. Here we aim to demonstrate that a spatial decision support system based on geospatial cyberinfrastructure (GCI) can address all of the above, so producing a smart system for supporting decision making for agriculture, forestry, and urban planning with respect to the landscape. In this paper, we discuss methods and results of a special kind of GCI architecture, one that is highly focused on land management and soil conservation. The system allows us to obtain dynamic, multidisciplinary, multiscale, and multifunctional answers to agriculture, forestry, and urban planning issues through the Web. The system has been applied to and tested in an area of about 20 000 ha in the south of Italy, within the framework of a European LIFE+ project (SOILCONSWEB). The paper reports – as a case study – results from two different applications dealing with agriculture (olive growth tool) and environmental protection (soil capability to protect groundwater). Developed with the help of end users, the system is starting to be adopted by local communities. The system indirectly explores a change of paradigm for soil and landscape scientists. Indeed, the potential benefit is shown of overcoming current disciplinary fragmentation over landscape issues by offering – through a smart Web-based system – truly integrated geospatial knowledge that may be directly and freely used by any end user ( www.landconsultingweb.eu ). This may help bridge the last very important divide between scientists working on the landscape and end users.

Description: Towards predictive data-driven simulations of wildfire spread – Part II: Ensemble Kalman Filter for the state estimation of a front-tracking simulator of wildfire spread Natural Hazards and Earth System Science, 15, 1721-1739, 2015 Author(s): M. C. Rochoux, C. Emery, S. Ricci, B. Cuenot, and A. Trouvé This paper is the second part in a series of two articles, which aims at presenting a data-driven modeling strategy for forecasting wildfire spread scenarios based on the assimilation of the observed fire front location and on the sequential correction of model parameters or model state. This model relies on an estimation of the local rate of fire spread (ROS) as a function of environmental conditions based on Rothermel's semi-empirical formulation, in order to propagate the fire front with an Eulerian front-tracking simulator. In Part I, a data assimilation (DA) system based on an ensemble Kalman filter (EnKF) was implemented to provide a spatially uniform correction of biomass fuel and wind parameters and thereby, produce an improved forecast of the wildfire behavior (addressing uncertainties in the input parameters of the ROS model only). In Part II, the objective of the EnKF algorithm is to sequentially update the two-dimensional coordinates of the markers along the discretized fire front, in order to provide a spatially distributed correction of the fire front location and thereby, a more reliable initial condition for further model time-integration (addressing all sources of uncertainties in the ROS model). The resulting prototype data-driven wildfire spread simulator is first evaluated in a series of verification tests using synthetically generated observations; tests include representative cases with spatially varying biomass properties and temporally varying wind conditions. In order to properly account for uncertainties during the EnKF update step and to accurately represent error correlations along the fireline, it is shown that members of the EnKF ensemble must be generated through variations in estimates of the fire's initial location as well as through variations in the parameters of the ROS model. The performance of the prototype simulator based on state estimation (SE) or parameter estimation (PE) is then evaluated by comparison with data taken from a reduced-scale controlled grassland fire experiment. Results indicate that data-driven simulations are capable of correcting inaccurate predictions of the fire front location and of subsequently providing an optimized forecast of the wildfire behavior at future lead times. The complementary benefits of both PE and SE approaches, in terms of analysis and forecast performance, are also emphasized. In particular, it is found that the size of the assimilation window must be specified adequately with the persistence of the model initial condition and/or with the temporal and spatial variability of the environmental conditions in order to track sudden changes in wildfire behavior. The present prototype data-driven forecast system is still at an early stage of development. In this regard, this preliminary investigation provides valuable information on how to combine observations with a fire spread model in an efficient way, as well as guidelines to design the future system evolution in order to meet the operational requirements of wildfire spread monitoring.

Description: High resolution satellite turbidity and sea surface temperature observations of river plume interactions during a significant flood event Ocean Science Discussions, 12, 1669-1692, 2015 Author(s): V. E. Brando, F. Braga, L. Zaggia, C. Giardino, M. Bresciani, D. Bellafiore, C. Ferrarin, F. Maicu, A. Benetazzo, D. Bonaldo, F. M. Falcieri, A. Coluccelli, A. Russo, and S. Carniel Sea surface temperature (SST) and turbidity ( T ) derived from Landsat-8 (L8) imagery were used to characterize river plumes in the Northern Adriatic Sea (NAS) during a significant flood event in November 2014. Sea surface salinity (SSS) from an operational coupled ocean-wave model supported the interpretation of the plumes interaction with the receiving waters and among them. There was a good agreement of the SSS, T , and SST fields at the sub-mesoscale and mesoscale delineation of the major river plumes. L8 30 m resolution enabled also the description of smaller plume structures. Sharp fronts in T and SST delimited each single river plume. The isotherms and turbidity isolines coupling varied among the plumes due to differences in particle loads and surface temperatures in the discharged waters. The different plumes reflectance spectra were related to the lithological fingerprint of the sediments in the river catchments.

Description: Sea level trend and variability around Peninsular Malaysia Ocean Science, 11, 617-628, 2015 Author(s): Q. H. Luu, P. Tkalich, and T. W. Tay Sea level rise due to climate change is non-uniform globally, necessitating regional estimates. Peninsular Malaysia is located in the middle of Southeast Asia, bounded from the west by the Malacca Strait, from the east by the South China Sea (SCS), and from the south by the Singapore Strait. The sea level along the peninsula may be influenced by various regional phenomena native to the adjacent parts of the Indian and Pacific oceans. To examine the variability and trend of sea level around the peninsula, tide gauge records and satellite altimetry are analyzed taking into account vertical land movements (VLMs). At annual scale, sea level anomalies (SLAs) around Peninsular Malaysia on the order of 5–25 cm are mainly monsoon driven. Sea levels at eastern and western coasts respond differently to the Asian monsoon: two peaks per year in the Malacca Strait due to South Asian–Indian monsoon; an annual cycle in the remaining region mostly due to the East Asian–western Pacific monsoon. At interannual scale, regional sea level variability in the range of ±6 cm is correlated with El Niño–Southern Oscillation (ENSO). SLAs in the Malacca Strait side are further correlated with the Indian Ocean Dipole (IOD) in the range of ±5 cm. Interannual regional sea level falls are associated with El Niño events and positive phases of IOD, whilst rises are correlated with La Niña episodes and negative values of the IOD index. At seasonal to interannual scales, we observe the separation of the sea level patterns in the Singapore Strait, between the Raffles Lighthouse and Tanjong Pagar tide stations, likely caused by a dynamic constriction in the narrowest part. During the observation period 1986–2013, average relative rates of sea level rise derived from tide gauges in Malacca Strait and along the east coast of the peninsula are 3.6±1.6 and 3.7±1.1 mm yr −1 , respectively. Correcting for respective VLMs (0.8±2.6 and 0.9±2.2 mm yr −1 ), their corresponding geocentric sea level rise rates are estimated at 4.4±3.1 and 4.6±2.5 mm yr −1 . The geocentric rates are about 25 % faster than those measured at tide gauges around the peninsula; however, the level of uncertainty associated with VLM data is relatively high. For the common period between 1993 and 2009, geocentric sea level rise values along the Malaysian coast are similar from tide gauge records and satellite altimetry (3.1 and 2.7 mm yr −1 , respectively), and arguably correspond to the global trend.

Description: Yield and quality estimations provide vital information to fruit growers, yet require accurate monitoring throughout the growing season. To this end, the temporal dependency of fruit yield and quality estimations through spectral vegetation indices was investigated in irrigated and rainfed pear orchards. Both orchards were monitored throughout three consecutive growing seasons, including spectral measurements (i.e., hyperspectral canopy reflectance measurements) as well as yield determination (i.e., total yield and number of fruits per tree) and quality assessment (i.e., fruit firmness, total soluble solids and fruit color). The results illustrated a clear association between spectral vegetation indices and both fruit yield and fruit quality (|r| > 0.75; p 〈 0.001). However, the correlations between vegetation indices and production variables varied throughout the growing season, depending on the phenological stage of fruit development. In the irrigated orchard, index values showed a strong association with production variables near time of harvest (|r| > 0.6; p 〈 0.001), while in the rainfed orchard, index values acquired during vegetative growth periods presented stronger correlations with fruit parameters (|r| > 0.6; p 〈 0.001). The improved planning of remote sensing missions during (rainfed orchards) and after (irrigated orchards) vegetative growth periods could enable growers to more accurately predict production outcomes and improve the production process.

Description: The combination of optical trapping with Raman spectroscopy provides a powerful method for the study, characterization, and identification of biological micro-particles. In essence, optical trapping helps to overcome the limitation imposed by the relative inefficiency of the Raman scattering process. This allows Raman spectroscopy to be applied to individual biological particles in air and in liquid, providing the potential for particle identification with high specificity, longitudinal studies of changes in particle composition, and characterization of the heterogeneity of individual particles in a population. In this review, we introduce the techniques used to integrate Raman spectroscopy with optical trapping in order to study individual biological particles in liquid and air. We then provide an overview of some of the most promising applications of this technique, highlighting the unique types of measurements enabled by the combination of Raman spectroscopy with optical trapping. Finally, we present a brief discussion of future research directions in the field.

Description: In this paper, we propose a novel extrinsic calibration method for camera networks using a sphere as the calibration object. First of all, we propose an easy and accurate method to estimate the 3D positions of the sphere center w.r.t. the local camera coordinate system. Then, we propose to use orthogonal procrustes analysis to pairwise estimate the initial camera relative extrinsic parameters based on the aforementioned estimation of 3D positions. Finally, an optimization routine is applied to jointly refine the extrinsic parameters for all cameras. Compared to existing sphere-based 3D position estimators which need to trace and analyse the outline of the sphere projection in the image, the proposed method requires only very simple image processing: estimating the area and the center of mass of the sphere projection. Our results demonstrate that we can get a more accurate estimate of the extrinsic parameters compared to other sphere-based methods. While existing state-of-the-art calibration methods use point like features and epipolar geometry, the proposed method uses the sphere-based 3D position estimate. This results in simpler computations and a more flexible and accurate calibration method. Experimental results show that the proposed approach is accurate, robust, flexible and easy to use.

Description: We study the Bäcklund transformations of integrable geometric curve flows in certain geometries. These curve flows include the KdV and Camassa-Holm flows in the two-dimensional centro-equiaffine geometry, the mKdV and modified Camassa-Holm flows in the two-dimensional Euclidean geometry, the Schrödinger and extended Harry-Dym flows in the three-dimensional Euclidean geometry and the Sawada-Kotera flow in the affine geometry, etc. Using the fact that two different curves in a given geometry are governed by the same integrable equation, we obtain Bäcklund transformations relating to these two integrable geometric flows. Some special solutions of the integrable systems are used to obtain the explicit Bäcklund transformations.

Description: We suggest a diagrammatic model of computation based on an axiom of distributivity. A diagram of a decorated colored tangle, similar to those that appear in low dimensional topology, plays the role of a circuit diagram. Equivalent diagrams represent bisimilar computations. We prove that our model of computation is Turing complete and with bounded resources that it can decide any language in complexity class IP, sometimes with better performance parameters than corresponding classical protocols.

Description: Information technology (IT) security has become a major concern due to the growing demand for information and massive development of client/server applications for various types of applications running on modern IT infrastructure. How has security been taken into account and which paradigms are necessary to minimize security issues while increasing efficiency, reducing the influence on transmissions, ensuring protocol independency and achieving substantial performance? We have found cryptography to be an absolute security mechanism for client/server architectures, and in this study, a new security design was developed with the MODBUS protocol, which is considered to offer phenomenal performance for future development and enhancement of real IT infrastructure. This study is also considered to be a complete development because security is tested in almost all ways of MODBUS communication. The computed measurements are evaluated to validate the overall development, and the results indicate a substantial improvement in security that is differentiated from conventional methods.

Description: With the increase in the number of music files on various devices, it can be difficult to locate a desired file, especially when the title of the song or the name of the singer is not known. We propose a new query-by-singing/humming (QbSH) system that can find music files that match what the user is singing or humming. This research is novel in the following three ways: first, the Fourier descriptor (FD) method is proposed as the first classifier; it transforms the humming or music waveform into the frequency domain. Second, quantized dynamic time warping (QDTW) using symmetrical search space and quantized linear scaling (QLS) are used as the second and third classifiers, respectively, which increase the accuracy of the QbSH system compared to the conventional DTW and LS methods. Third, five classifiers, which include the three already mentioned along with the conventional DTW using symmetrical search space and LS methods, are combined using score level fusion, which further enhances performance. Experimental results with the 2009 MIR-QbSH corpus and the AFA MIDI 100 databases show that the proposed method outperforms those using a single classifier and other fusion methods.

Description: We introduce, generate and study a family of supersymmetric displaced number states (SDNS) that can be considered generalized coherent states of the supersymmetric harmonic oscillator. The family is created from the seminal supersymmetric boson-fermion entangling annihilation operator introduced by Aragone and Zypman and later expanded by Kornbluth and Zypman. Using the momentum representation, the states are obtained analytically in compact form as displaced supersymmetric number states. We study their position-momentum uncertainties, and their bunchiness by classifying them according to their Mandel Q-parameter in phase space. We were also able to find closed form analytical representations in the space and number basis.

Description: Virtual simulation technology has been considered as a highly efficient and cost-effective solution for a soldier training system, and evolved into diverse combinations of hardware and software. To maximize the virtual reality effect within a restricted space, a locomotion interface such as an omni-directional treadmill is introduced as a major component of a virtual simulator, therefore real time interaction between human and the virtual simulator becomes very important. Displacement and heading changes of the trainee are crucial information to control the virtual simulator when we implement highly reactive motion control for the omni-directional treadmill and interaction control of the virtual contents. This paper proposes a control parameter estimation algorithm for the virtual training simulator by using two types of motion capture sensors and presents the experimental results. Kinematic joint positions are analyzed to estimate the trainee’s location and velocity for feedback and feedforward control of the omni-directional treadmill. The accuracy of two approaches is evaluated by comparing with the reference system, which gives a ground truth value.

Description: A case study on generation mechanisms of a sporadic sodium layer above Tromsø (69.6° N) during a night of high auroral activity Annales Geophysicae, 33, 941-953, 2015 Author(s): T. Takahashi, S. Nozawa, T. T. Tsuda, Y. Ogawa, N. Saito, T. Hidemori, T. D. Kawahara, C. Hall, H. Fujiwara, N. Matuura, A. Brekke, M. Tsutsumi, S. Wada, T. Kawabata, S. Oyama, and R. Fujii We have quantitatively evaluated generation mechanisms of a sporadic sodium layer (SSL) based on observational data obtained by multiple instruments at a high-latitude station: Ramfjordmoen, Tromsø, Norway (69.6° N, 19.2° E). The sodium lidar observed an SSL at 21:18 UT on 22 January 2012. The SSL was observed for 18 min, with a maximum sodium density of about 1.9 × 10 10 m −3 at 93 km with a 1.1 km thickness. The European Incoherent Scatter (EISCAT) UHF radar observed a sporadic E layer (Es layer) above 90 km from 20:00 to 23:00 UT. After 20:00 UT, the Es layer gradually descended and reached 94 km at 21:18 UT when the SSL appeared at the same altitude. In this event, considering the abundance of sodium ions (10 % or less), the Es layer could provide only about 37 % or less of the sodium atoms to the SSL. We have investigated a temporal development of the normal sodium ion layer with a consideration of chemical reactions and the effect of the (southwestward) electric field using observational values of the neutral temperature, electron density, horizontal neutral wind, and electric field. This calculation has shown that those processes, including contributions of the Es layer, would provide about 88 % of sodium atoms of the SSL. The effects of meteor absorption and auroral particle sputtering appear to be less important. Therefore, we have concluded that the major source of the SSL was sodium ions in a normal sodium ion layer. Two processes – namely the downward transportation of sodium ions from a normal sodium ion layer due to the electric field and the additional supply of sodium ions from the Es layer under relatively high electron density conditions (i.e., in the Es layer) – played a major role in generating the SSL in this event. Furthermore, we have found that the SSL was located in a lower-temperature region and that the temperature inside the SSL did not show any remarkable temperature enhancements.

Description: Conceptual design of a measurement network of the global change Atmospheric Chemistry and Physics Discussions, 15, 21063-21093, 2015 Author(s): P. Hari, T. Petäjä, J. Bäck, V.-M. Kerminen, H. K. Lappalainen, T. Vihma, T. Laurila, Y. Viisanen, T. Vesala, and M. Kulmala The global environment is changing rapidly due to anthropogenic emissions and actions. Such activities modify aerosol and greenhouse gas concentrations in the atmosphere, leading to regional and global climate change and affecting e.g. food and fresh-water security, sustainable use of natural resources and even demography. Here we present a conceptual design of a global, hierarchical observation network that can provide tools and increased understanding to tackle the inter-connected environmental and societal challenges that we will face in the coming decades. The philosophy behind the conceptual design relies on physical conservation laws of mass, energy and momentum, as well as on concentration gradients that act as driving forces for the atmosphere-biosphere exchange. The network is composed of standard, flux/advanced and flagship stations, each of which having specific and identified tasks. Each ecosystem type on the globe has its own characteristic features that have to be taken into consideration. The hierarchical network as a whole is able to tackle problems related to large spatial scales, heterogeneity of ecosystems and their complexity. The most comprehensive observations are envisioned to occur in flag ship stations, with which the process-level understanding can be expanded to continental and global scales together with advanced data analysis, earth system modelling and satellite remote sensing. The denser network of the flux and standard stations allow application and up-scaling of the results obtained from flag ship stations to the global level.

Description: Sensitivities of UK PM 2.5 concentrations to emissions reductions Atmospheric Chemistry and Physics Discussions, 15, 20881-20910, 2015 Author(s): M. Vieno, M. R. Heal, M. L. Williams, E. J. Carnell, J. R. Stedman, and S. Reis The reduction of ambient concentrations of fine particulate matter (PM 2.5 ) is a key objective for air pollution control policies in the UK and elsewhere. Long-term exposure to PM 2.5 has been identified as a major contributor to adverse human health effects in epidemiological studies and underpins ambient PM 2.5 legislation. As a range of emission sources and atmospheric chemistry transport processes contribute to PM 2.5 concentrations, atmospheric chemistry transport models are an essential tool to assess emissions control effectiveness. The EMEP4UK atmospheric chemistry transport model was used to investigate the impact of reductions in UK anthropogenic emissions of primary PM 2.5 , NH 3 , NO x , SO x or non-methane VOC on surface concentrations of PM 2.5 in the UK for a recent year (2010) and for a future current legislation emission scenario (2030). In general, the sensitivity to UK mitigation is rather small. A 30 % reduction in UK emissions of any one of the above components yields (for the 2010 simulation) a maximum reduction in PM 2.5 in any given location of ~ 0.6 μg m −3 (equivalent to ~ 6 % of the modelled PM 2.5 ). On average across the UK, the sensitivity of PM 2.5 concentrations to a 30 % reduction in UK emissions of individual contributing components, for both the 2010 and 2030 CLE baselines, increases in the order NMVOC, NO x , SO x , NH 3 and primary PM 2.5 , but there are strong spatial differences in the PM 2.5 sensitivities across the UK. Consequently, the sensitivity of PM 2.5 to individual component emissions reductions varies between area and population weighting. Reductions in NH 3 have the greatest effect on area-weighted PM 2.5 . A full UK population weighting places greater emphasis on reductions of primary PM 2.5 emissions, which is simulated to be the most effective single-component control on PM 2.5 for the 2030 scenario. An important observation is that weighting corresponding to the Average Exposure Indicator metric (using data from the 45 model grids containing a monitor whose measurements are used to calculate the UK AEI) further increases the emphasis on the effectiveness of primary PM 2.5 emissions reductions (and of NO x emissions reductions) relative to the effectiveness of NH 3 emissions reductions. Reductions in primary PM 2.5 have the largest impact on the AEI in both 2010 and the 2030 CLE scenario. The summation of the modelled reductions to the UK PM 2.5 AEI from 30 % reductions in UK emissions of primary PM 2.5 , NH 3 , SO x , NO x and VOC totals 1.17 and 0.82 μg m −3 for the 2010 and 2030 CLE simulations, respectively.

Description: A dual, single detector relaxed eddy accumulation system for long-term measurement of mercury flux Atmospheric Measurement Techniques Discussions, 8, 8113-8156, 2015 Author(s): S. Osterwalder, J. Fritsche, M. B. Nilsson, C. Alewell, J. Sommar, G. Jocher, M. Schmutz, J. Rinne, and K. Bishop The fate of anthropogenic emissions of mercury (Hg) to the atmosphere is influenced by the exchange of elemental Hg with the earth surface. This exchange which holds the key to a better understanding of Hg cycling from local to global scales has been difficult to quantify. To advance and facilitate research about land–atmosphere Hg interactions, we developed a dual-intake, single analyzer Relaxed Eddy Accumulation (REA) system. REA is an established technique for measuring turbulent fluxes of trace gases and aerosol particles in the atmospheric surface layer. Accurate determination of gaseous elemental mercury (GEM) fluxes has proven difficult to technical challenges presented by extremely small concentration differences (typically 〈 0.5 ng m −3 ) between updrafts and downdrafts. To address this we present an advanced REA design that uses two inlets and two pair of gold cartridges for semi-continuous monitoring of GEM fluxes. They are then analyzed sequentially on the same detector while another pair of gold cartridges takes over the sample collection. We also added a reference gas module for repeated quality-control measurements. To demonstrate the system performance, we present results from field campaigns in two contrasting environments: an urban setting with a heterogeneous fetch and a boreal mire during snow-melt. The observed emission rates were 15 and 3 ng m −2 h −1 . We claim that this dual-inlet, single detector approach is a significant development of the REA system for ultra-trace gases and can help to advance our understanding of long-term land–atmosphere GEM exchange.

Description: The current accelerated growth in demand for energy globally is confronted by water-resource limitations and hydrologic variability linked to climate change. The global spatial and temporal trends in water requirements for energy development and policy alternatives to address these constraints are poorly understood. This article analyzes national-level energy demand trends from U.S. Energy Information Administration data in relation to newly available assessments of water consumption and life-cycle impacts of thermoelectric generation and biofuel production, and freshwater availability and sectoral allocations from the U.N. Food and Agriculture Organization and the World Bank. Emerging, energy-related water scarcity flashpoints include the world’s largest, most diversified economies (Brazil, India, China, and USA among others), while physical water scarcity continues to pose limits to energy development in the Middle East and small-island states. Findings include the following: (a) technological obstacles to alleviate water scarcity driven by energy demand are surmountable; (b) resource conservation is inevitable, driven by financial limitations and efficiency gains; and (c) institutional arrangements play a pivotal role in the virtuous water-energy-climate cycle. We conclude by making reference to coupled energy-water policy alternatives including water-conserving energy portfolios, intersectoral water transfers, virtual water for energy, hydropower tradeoffs, and use of impaired waters for energy development.

Description: Perceived temperature in the course of climate change: an analysis of global heat index from 1979 to 2013 Earth System Science Data, 7, 193-202, 2015 Author(s): D. Lee and T. Brenner The increase in global mean temperatures resulting from climate change has wide reaching consequences for the earth's ecosystems and other natural systems. Many studies have been devoted to evaluating the distribution and effects of these changes. We go a step further and propose the use of the heat index, a measure of the temperature as perceived by humans, to evaluate global changes. The heat index, which is computed from temperature and relative humidity, is more important than temperature for the health of humans and animals. Even in cases where the heat index does not reach dangerous levels from a health perspective, it has been shown to be an important factor in worker productivity and thus in economic productivity. We compute the heat index from dew point temperature and absolute temperature 2 m above ground from the ERA-Interim reanalysis data set for the years 1979–2013. The described data set provides global heat index aggregated to daily minima, means and maxima per day ( doi:10.1594/PANGAEA.841057 ). This paper examines these data, as well as showing aggregations to monthly and yearly values. Furthermore, the data are spatially aggregated to the level of countries after being weighted by population density in order to facilitate the analysis of its impact on human health and productivity. The resulting data deliver insights into the spatiotemporal development of near-ground heat index during the course of the past three decades. It is shown that the impact of changing heat index is unevenly distributed through space and time, affecting some areas differently than others. The data can serve as a basis for evaluating and understanding the evolution of heat index in the course of climate change, as well as its impact on human health and productivity.

Description: In order to evaluate the dynamics of carbon storage during forest succession and explore the significance of water relations and soil stability in forest environments, a study was conducted in 2011. This study investigated the dynamics of soil organic carbon (SOC) fractions and its protection through aggregation along the successional forests. An experiment in South China examined pine forest (PF), pine and broadleaved mixed forest (PBMF), and monsoon evergreen broadleaf forest (MEBF), which represent the early, middle, and advanced succession stages, respectively. Soil was sampled at 0–15, 15–30, 30–45, and 45–60 cm depths. We analyzed active, slow, and passive organic carbon, as well as particulate organic matter carbon (POM-C) and nitrogen (POM-N), and measured the weight and concentration of water-stable aggregates in four classes (>2000 μm, 250–2000 μm, 53–250 μm, and 〈53 μm). The results suggested that various carbon fractions and the percentage of active and passive carbon to total organic carbon (TOC) increased with forest succession. The percentage of water-stable aggregates in >2000 μm (0–15 cm and 15–30 cm) and 〈53 μm (45–60 cm) in MEBF was significantly higher than in PBMF and PF. The SOC content of all size classes of water-stable aggregates in 0–45 cm were significantly increased with forest succession. In conclusion, forest succession contributed to the accumulation of carbon storage, and the increasing percentage of silt- and clay-size (〈53 μm) fraction improved the stability of soil organic matter (SOM).

Description: In the last decades the increasing energy requirements along with the need to face the consequences of climate change have driven the search for renewable energy sources, in order to replace as much as possible the use of fossil fuels. In this context biomass has generated great interest as it can be converted into energy via several routes, including fermentation and anaerobic digestion. The former is the most common option to produce ethanol, which has been recognized as one of the leading candidates to substitute a large fraction of the liquid fuels produced from oil. As the economic competitiveness of bioethanol fermentation processes has to be enhanced in order to promote its wider implementation, the most recent trends are directed towards the use of fermentation by-products within anaerobic digestion. The integration of both fermentation and anaerobic digestion, in a biorefinery concept, would allow the production of ethanol along with that of biogas, which can be used to produce heat and electricity, thus improving the overall energy balance. This work aims at reviewing the main studies on the combination of both bioethanol and biogas production processes, in order to highlight the strength and weakness of the integrated treatment for industrial application.

Description: Multiscale evaluation of the standardized precipitation index as a groundwater drought indicator Hydrology and Earth System Sciences Discussions, 12, 7405-7436, 2015 Author(s): R. Kumar, J. L. Musuuza, A. F. Van Loon, A. J. Teuling, R. Barthel, J. Ten Broek, J. Mai, L. Samaniego, and S. Attinger The lack of comprehensive groundwater observations at regional and global scales has promoted the use of alternative proxies and indices to quantify and predict groundwater droughts. Among them, the Standardized Precipitation Index (SPI) is commonly used to characterize droughts in different compartments of the hydro-meteorological system. In this study, we explore the suitability of the SPI to characterize local and regional scale groundwater droughts using observations at more than 2000 groundwater wells in geologically different areas in Germany and the Netherlands. A multiscale evaluation of the SPI is performed using the station data and their corresponding 0.5° gridded estimates to analyze the local and regional behavior of groundwater droughts, respectively. The standardized anomalies in the groundwater heads (SGI) were correlated against SPIs obtained using different accumulation periods. The accumulation periods to achieve maximum correlation exhibited high spatial variability (ranges 3 to 36 months) at both scales, leading to the conclusion that an a priori selection of the accumulation period (for computing the SPI) would result in inadequate characterization of groundwater droughts. The application of the uniform accumulation periods over the entire domain significantly reduced the correlation between SPI and SGI (≈ 21–66 %) indicating the limited applicability of SPI as a proxy for groundwater droughts even at long accumulation times. Furthermore, the low scores of the hit rate (0.3–0.6) and high false alarm ratio (0.4–0.7) at the majority of the wells and grid cells demonstrated the low reliability of groundwater drought predictions using the SPI. The findings of this study highlight the pitfalls of using the SPI as a groundwater drought indicator at both local and regional scales, and stress the need for more groundwater observations and accounting for regional hydrogeological characteristics in groundwater drought monitoring.

Description: Comparing the Ensemble and Extended Kalman Filters for in situ soil moisture assimilation with contrasting soil conditions Hydrology and Earth System Sciences Discussions, 12, 7353-7403, 2015 Author(s): D. Fairbairn, A. L. Barbu, J.-F. Mahfouf, J.-C. Calvet, and E. Gelati Two data assimilation methods are compared for their ability to produce a deterministic soil moisture analysis on the Météo-France land surface model: (i) SEKF, a Simplified Extended Kalman Filter, which uses a climatological background-error covariance, (ii) EnSRF, the Ensemble Square Root Filter, which uses an ensemble background-error covariance and approximates random forcing errors stochastically. The accuracy of the deterministic analysis is measured on 12 sites with in situ observations and various soil textures in Southwest France (SMOSMANIA network). In the experiments with real observations, the two methods perform similarly and improve on the open loop. Both methods suffer from incorrect linear assumptions which are particularly degrading to the analysis during water-stressed conditions: the EnSRF by a dry bias and the SEKF by an over-sensitivity of the model Jacobian between the surface and the root zone layers. These problems are less severe for sandy soils than clay soils because sandy soils are less sensitive to perturbations in the initial conditions. A simple bias correction technique is tested on the EnSRF. Although this reduces the bias, it also suppresses the ensemble spread, which degrades the analysis performance. However, the EnSRF flow-dependent background-error covariance evidently captures seasonal variability in the soil moisture errors and should exploit planned improvements in the model physics. Synthetic experiments demonstrate that when there is only a random component in the precipitation forcing errors, the correct stochastic representation of these errors enables the EnSRF to perform better than the SEKF. But in the real experiments the same rainfall error specification does not improve the EnSRF analysis. It is likely that the actual rainfall errors are underestimated and that other sources of errors could limit the usefulness of this information. More comprehensive ways of representing the rainfall errors are suggested, which might improve the EnSRF performance.

Description: Objective: To assess the burden of regional environmental factors influencing the incidence of Melanoma in the Italian population and overcome the problem of partial population coverage by local cancer registries and thematic archives. Methods: We analyzed the Italian national hospitalization records from 2001 to 2008 provided by the Ministry of Health, excluding hospital re-admissions of the same patients, in order to assess the occurrence of Melanoma over a 8-year period. Data were presented by age groups (absolute number of cases from 20 to ≥80 years old) and per Region (rates per 100,000 inhabitants) for each year. Results: The overall number of new hospitalizations due to malignant Melanoma increased by 16.8% from 2001 (n = 4846) to 2008 (n = 5823), with the rate per 100,000 inhabitants passing from 10.5 to almost 12.0 at a national level. The majority of new diagnoses of malignant Melanoma was observed in two age groups: 61–70 years old (from 979 in 2001 up to 2109 in 2008, corresponding to 15.1 and 18.1 new cases per 100,000 inhabitants, respectively) and 71–80 years old (from 954 in 2001 up to 1141 in 2008, corresponding to 19.5 and 21.8 new cases per 100,000 inhabitants, respectively). The number of hospitalizations due to Melanoma increased in all age groups with the only exception of the youngest patients aged 20–30 years old. The highest increases over the 8-year period were observed in people aged ≥81 years old (+34%), 61–70 years old (+20%) and surprisingly in the age group 31–40 years old (+17%). Southern Regions showed lower hospitalization rates compared to Northern Italy and Region Lazio. The highest increases between 2001 and 2008 were observed in Trentino/Alto Adige, Friuli Venezia Giulia, Valla d’Aosta and Veneto Region. Conclusions: Hospitalizations due to malignant Melanoma in Italy seem to be influenced by environmental or population-related factors showing a decreasing incidence rate from the Northern to Southern Regions.

Description: This paper presents preliminary polarization measurements and systematic-error characterization of the Thirty Gigahertz Instrument receiver developed for the QUIJOTE experiment. The instrument has been designed to measure the polarization of Cosmic Microwave Background radiation from the sky, obtaining the Q, U, and I Stokes parameters of the incoming signal simultaneously. Two kinds of linearly polarized input signals have been used as excitations in the polarimeter measurement tests in the laboratory; these show consistent results in terms of the Stokes parameters obtained. A measurement-based systematic-error characterization technique has been used in order to determine the possible sources of instrumental errors and to assist in the polarimeter calibration process.

Description: During the last few years, the issues of energy efficiency and energy saving have dominated the buildings research field. New constructions are based on efficient design and, because of this, the real challenge is to retrofit existing buildings. Italian standards impose thermal transmittance limits for opaque and transparent surfaces, according to the climatic area. In order to understand buildings’ energy behavior, an accurate analysis, carried out by employing advanced calculation codes and instrumental diagnosis—provided by the use of heat flow meter, surface temperature probes and thermal imaging camera—is needed. In this paper, a structure built in the 50 s has been analyzed, by means of a measurement campaign, to investigate the building’s characteristics and its vulnerability. Finally, some retrofit hypotheses have been evaluated by means of a well-known dynamic code. All investments have to be analyzed under a financial point of view, considering materials and installation costs. For this reason, the payback time has been calculated in order to understand how quickly the energy upgrading can be repaid.

Description: The main aim of this research was to improve risk mapping of heavy metals by taking account of erosion effects. A new spatiotemporal index, namely the G2met index, is introduced, with integration of pre-existing methodologies (Hakanson, EPM, and G2). The G2met index is depicted as a series of risk maps for each heavy metal on a month-time step. The southern part of Cyprus Island was selected as a study area. Concentration of major heavy metals was extracted with soil sampling in a grid of 5350 sites. Rainfall, vegetation, soil, land use, topographic, and hydrologic data were collected from existing European or global databases (WorldClim, BioBar, REDES, ESDAC, CORINE, ASTER GDEM, and USGS). A large number of regional-scale risk maps (with 500-m cell size) were created: one for each heavy metal and totally per month and annually; in addition, choropleth maps in terms of statistics per river basin were produced for every metal. Generally, the G2met maps resulted in different spatial patterns in comparison to those depicted by the Hakanson index alone.

Description: Patterns in atmospheric carbonaceous aerosols in China: emission estimates and observed concentrations Atmospheric Chemistry and Physics, 15, 8657-8678, 2015 Author(s): H. Cui, P. Mao, Y. Zhao, C. P. Nielsen, and J. Zhang China is experiencing severe carbonaceous aerosol pollution driven mainly by large emissions resulting from intensive use of solid fuels. To gain a better understanding of the levels and trends of carbonaceous aerosol emissions and the resulting ambient concentrations at the national scale, we update an emission inventory of anthropogenic organic carbon (OC) and elemental carbon (EC) and employ existing observational studies to analyze characteristics of these aerosols including temporal, spatial, and size distributions, and the levels and shares of secondary organic carbon (SOC) in total OC. We further use ground observations to test the levels and inter-annual trends of the calculated national and provincial emissions of carbonaceous aerosols, and propose possible improvements in emission estimation for the future. The national OC emissions are estimated to have increased 29 % from 2000 (2127 Gg) to 2012 (2749 Gg) and EC by 37 % (from 1356 to 1857 Gg). The residential, industrial, and transportation sectors contributed an estimated 74–78, 17–21, and 4–6 % of the total emissions of OC, respectively, and 49–55, 30–34, and 14–18 % of EC. Updated emission factors (EFs) based on the most recent local field measurements, particularly for biofuel stoves, led to considerably lower emissions of OC compared to previous inventories. Compiling observational data across the country, higher concentrations of OC and EC are found in northern and inland cities, while higher OC / EC ratios are found in southern sites, due to the joint effects of primary emissions and meteorology. Higher OC / EC ratios are estimated at rural and remote sites compared to urban ones, attributed to more emissions of OC from biofuel use, more biogenic emissions of volatile organic compound (VOC) precursors to SOC, and/or transport of aged aerosols. For most sites, higher concentrations of OC, EC, and SOC are observed in colder seasons, while SOC / OC is reduced, particularly at rural and remote sites, attributed partly to weaker atmospheric oxidation and SOC formation compared to summer. Enhanced SOC formation from oxidization and anthropogenic activities like biomass combustion is judged to have crucial effects on severe haze events characterized by high particle concentrations. Several observational studies indicate an increasing trend in ambient OC / EC (but not in OC or EC individually) from 2000 to 2010, confirming increased atmospheric oxidation of OC across the country. Combining the results of emission estimation and observations, the improvement over prior emission inventories is indicated by inter-annual comparisons and correlation analysis. It is also indicated, however, that the estimated growth in emissions might be faster than observed growth, and that some sources with high primary OC / EC, such as burning of biomass, are still underestimated. Further studies to determine changing EFs over time in the residential sector and to compare to other measurements, such as satellite observations, are thus suggested to improve understanding of the levels and trends of primary carbonaceous aerosol emissions in China.

Description: In this paper, we investigate the basic properties of binary classification with a pseudo model based on the Itakura–Saito distance and reveal that the Itakura–Saito distance is a unique appropriate measure for estimation with the pseudo model in the framework of general Bregman divergence. Furthermore, we propose a novelmulti-task learning algorithm based on the pseudo model in the framework of the ensemble learning method. We focus on a specific setting of the multi-task learning for binary classification problems. The set of features is assumed to be common among all tasks, which are our targets of performance improvement. We consider a situation where the shared structures among the dataset are represented by divergence between underlying distributions associated with multiple tasks. We discuss statistical properties of the proposed method and investigate the validity of the proposed method with numerical experiments.

Description: Background: Second hand smoke (ETS)-associated particulate matter (PM) contributes considerably to indoor air contamination and constitutes a health risk for passive smokers. Easy to measure, PM is a useful parameter to estimate the dosage of ETS that passive smokers are exposed to. Apart from its suitability as a surrogate parameter for ETS-exposure, PM itself affects human morbidity and mortality in a dose-dependent manner. We think that ETS-associated PM should be considered an independent hazard factor, separately from the many other known harmful compounds of ETS. We believe that brand-specific and tobacco-product-specific differences in the release of PM matter and that these differences are of public interest. Methods: To generate ETS of cigarettes and cigarillos as standardized and reproducible as possible, an automatic second hand smoke emitter (AETSE) was developed and placed in a glass chamber. L&M cigarettes (“without additives”, “red label”, “blue label”), L&M filtered cigarillos (“red”) and 3R4F standard research cigarettes (as reference) were smoked automatically according to a self-developed, standardized protocol until the tobacco product was smoked down to 8 mm distance from the tipping paper of the filter. Results: Mean concentration (Cmean) and area under the curve (AUC) in a plot of PM2.5 against time were measured, and compared. CmeanPM2.5 were found to be 518 μg/m3 for 3R4F cigarettes, 576 μg/m3 for L&M “without additives” (“red”), 448 μg/m3 for L&M “blue label”, 547 μg/m3 for L&M “red label”, and 755 μg/m3 for L&M filtered cigarillos (“red”). AUCPM2.5-values were 208,214 μg/m3·s for 3R4F reference cigarettes, 204,629 μg/m3·s for L&M “without additives” (“red”), 152,718 μg/m3·s for L&M “blue label”, 238,098 μg/m3·s for L&M “red label” and 796,909 μg/m3·s for L&M filtered cigarillos (“red”). Conclusion: Considering the large and significant differences in particulate matter emissions between cigarettes and cigarillos, we think that a favorable taxation of cigarillos is not justifiable.

Description: Fruit classification is quite difficult because of the various categories and similar shapes and features of fruit. In this work, we proposed two novel machine-learning based classification methods. The developed system consists of wavelet entropy (WE), principal component analysis (PCA), feedforward neural network (FNN) trained by fitness-scaled chaotic artificial bee colony (FSCABC) and biogeography-based optimization (BBO), respectively. The K-fold stratified cross validation (SCV) was utilized for statistical analysis. The classification performance for 1653 fruit images from 18 categories showed that the proposed “WE + PCA + FSCABC-FNN” and “WE + PCA + BBO-FNN” methods achieve the same accuracy of 89.5%, higher than state-of-the-art approaches: “(CH + MP + US) + PCA + GA-FNN ” of 84.8%, “(CH + MP + US) + PCA + PSO-FNN” of 87.9%, “(CH + MP + US) + PCA + ABC-FNN” of 85.4%, “(CH + MP + US) + PCA + kSVM” of 88.2%, and “(CH + MP + US) + PCA + FSCABC-FNN” of 89.1%. Besides, our methods used only 12 features, less than the number of features used by other methods. Therefore, the proposed methods are effective for fruit classification.

Description: We propose an optimal electric energy management of a cooperative multi-microgrid community with sequentially coordinated operations. The sequentially coordinated operations are suggested to distribute computational burden and yet to make the optimal 24 energy management of multi-microgrids possible. The sequential operations are mathematically modeled to find the optimal operation conditions and illustrated with physical interpretation of how to achieve optimal energy management in the cooperative multi-microgrid community. This global electric energy optimization of the cooperative community is realized by the ancillary internal trading between the microgrids in the cooperative community which reduces the extra cost from unnecessary external trading by adjusting the electric energy production amounts of combined heat and power (CHP) generators and amounts of both internal and external electric energy trading of the cooperative community. A simulation study is also conducted to validate the proposed mathematical energy management models.

Description: We wish to make the following changes to the published article [1], agreed upon by all authors. Claudia R. Binder has withdrawn her co-authorship. The corrected author list should therefore read: Camilo Lesmes-Fabian.[...]

Description: Morphological dynamics of an englacial channel Hydrology and Earth System Sciences Discussions, 12, 7615-7664, 2015 Author(s): G. Vatne and T. D. L. Irvine-Fynn Despite an interest in the hydraulic functioning of supraglacial and englacial channels over the last four decades, the processes and forms of such ice-bounded streams have remained poorly documented. Recent glaciological research has demonstrated the potential significance of so-called "cut and closure" streams, where englacial or subglacial flowpaths are created from the long-term incision of supraglacial channels. These flowpaths are reported to exhibit step-pool morphology, comprising knickpoints and/or knickzones, albeit exaggerated in dimensions in comparison to their supraglacial channel counterparts. However, little is known of the development of such channels' morphology. Here, we examine the spatial organization of step-pools and the upstream migration of steps, many of which form knickzones, with repeated surveys over a 10 year period in an englacial conduit in cold-based Austre Brøggerbreen, Svalbard. The observations show upstream knickpoint recession to be the dominant process for channel evolution. This is paralleled by an increase in average step height and conduit gradient over time. Characteristic channel reach types and step-riser forms are consistently observed in each of the morphological surveys reported. We suggest that the formation of steps has a hydrodynamic origin, where step-pool geometry is more efficient for energy dissipation than meanders, and that the englacial channel system is one in rapid transition rather than in dynamic equilibrium. The evolution and recession of knickzones reported here result in the formation of a 37 m moulin, suggesting over time the englacial channel may evolve towards a stable end-point characterised by a singular vertical descent to the local hydraulic base level. In light of this, our observations highlight the need to further examine the adjustment processes in cut-and-closure channels to better understand their coupling to supraglacial meltwater sources and role and potential significance in cold-based glacier hydrology and ice dynamics.

Description: The cadmium (Cd) contaminated rice fields in Mae Sot District, Tak Province, Thailand has been one of the major environmental problems in Thailand for the last 10 years. We used disability adjusted life years (DALYs) to estimate the burden of disease attributable to Cd in terms of additional DALYs of Mae Sot residents. Cd exposure data included Cd and β2–microglobulin (β2-MG) in urine (as an internal exposure dose) and estimated cadmium daily intake (as an external exposure dose). Compared to the general Thai population, Mae Sot residents gained 10%–86% DALYs from nephrosis/nephritis, heart diseases, osteoporosis and cancer depending on their Cd exposure type and exposure level. The results for urinary Cd and dietary Cd intake varied according to the studies used for risk estimation. The ceiling effect was observed in results using dietary Cd intake because of the high Cd content in rice grown in the Mae Sot area. The results from β2-MG were more robust with additional DALYs ranging from 36%–86% for heart failure, cerebral infraction, and nephrosis/nephritis. Additional DALYs is a useful approach for assessing the magnitude of environmental Cd exposure. The Mae Sot population lost more healthy life compared to populations living in a non- or less Cd polluted area. This method should be applicable to various types of environmental contamination problems if exposure assessment information is available.

Description: Titanium dioxide nanoparticles (TiO2NPs) suspensions (concentration 1.0 g/L) in synthetic sweat solution were applied on Franz cells for 24 h using intact and needle-abraded human skin. Titanium content into skin and receiving phases was determined. Cytotoxicity (MTT, AlamarBlue® and propidium iodide, PI, uptake assays) was evaluated on HaCat keratinocytes after 24 h, 48 h, and seven days of exposure. After 24 h of exposure, no titanium was detectable in receiving solutions for both intact and damaged skin. Titanium was found in the epidermal layer after 24 h of exposure (0.47 ± 0.33 μg/cm2) while in the dermal layer, the concentration was below the limit of detection. Damaged skin, in its whole, has shown a similar concentration (0.53 ± 0.26 μg/cm2). Cytotoxicity studies on HaCaT cells demonstrated that TiO2NPs induced cytotoxic effects only at very high concentrations, reducing cell viability after seven days of exposure with EC50s of 8.8 × 10−4 M (MTT assay), 3.8 × 10−5 M (AlamarBlue® assay), and 7.6 × 10−4 M (PI uptake, index of a necrotic cell death). Our study demonstrated that TiO2NPs cannot permeate intact and damaged skin and can be found only in the stratum corneum and epidermis. Moreover, the low cytotoxic effect observed on human HaCaT keratinocytes suggests that these nano-compounds have a potential toxic effect at the skin level only after long-term exposure.

Description: The disposal of industrial paper mill sludge waste is a big issue and has a great importance all over the world. A study was conducted to determine the chemical properties of recycled paper mill sludge (RPMS) and assess its possibilities for land application. RPMS samples were collected from six different paper mills in Malaysia and analyzed for physical and chemical properties, heavy metals, polycyclic aromatic hydrocarbons, 13C-NMR spectra and for the presence of dioxins/furans. The RPMS was dewatered, sticky with a strong odour, an average moisture of 65.08%, pH 7.09, cation exchange capacity (CEC) 14.43 cmol (+) kg–1, N 1.45, P 0.18, K 0.12, Ca 0.82, Mg 0.73, Na 0.76 and Al, 1.38%. The polycyclic aromatic hydrocarbons (PAHs) and heavy metals levels were below the standard Class 2 limits. The dioxin and furan were in below the standard concentration of Class 1. The most prominent peak in the 13C-NMR spectra of RPMS was centered at 31 ppm, proving the presence of methylene (-CH2) groups in long aliphatic chains, with lipids and proteins. The signal at 89 ppm and highly shielded shoulder at 83 ppm were due to presence of cellulose carbon C-4, and the peak at 63 and 65 ppm was due to the cellulose carbon spectrum. The RPMS therefore contains significant amount of nutrients with safe levels of heavy metals and PAHs for environment and can be used as a fertilizer and soil amendment for land application.

Description: Doctor-shopping has caused an increase in medical expense, potential to receive duplicate medications, and suffer adverse drug reactions. We carried out a population-based retrospective study aimed at examining the user patterns of traditional Chinese medicine (TCM) ambulatory care in Taiwan. We retrieved complete TCM ambulatory visit datasets for the year 2007 from the National Health Insurance database in Taiwan. We defined the patients whose distribution of TCM physician numbers scored more than 97.5 percent (more than, or equal to, five TCM physicians) within one year as TCM doctor-shoppers. In total, 6,596,814 subjects (28.9%) paid TCM visits during that year. All 177,728 subjects (2.69%) who visited more than five (including) TCM physicians were classified as TCM shoppers. The most prevalent diagnostic grouping was upper respiratory infections (44.7%) and sprains and strains (44.0%). Men had a lower odds ratio (OR) among TCM shoppers than women (OR = 0.94, 95% confidence interval (CI) = 0.93–0.96). Younger people were less likely to be TCM shoppers than other people were. The ORs of TCM shoppers were higher among veterans and low-income patients (OR = 1.29 (1.23–1.35), and 1.33 (1.27–1.41)). In conclusion, health education on the potential of drug interactions and iatrogenic health risks incurred from doctor-shopping should be addressed to those high-risk patients.

Description: Day-to-day variability and stability of children’s physical activity levels across days of the week are not well understood. Our aims were to examine the day-to-day variability of moderate-to-vigorous physical activity (MVPA), to determine factors influencing the day-to-day variability of MVPA and to estimate stability of MVPA in children. The sample comprises 686 Portuguese children (10 years of age). MVPA was assessed with an accelerometer, and BMI was computed from measured height and weight. Daily changes in MVPA and their correlates (gender, BMI, and maturity) were modeled with a multilevel approach, and tracking was calculated using Foulkes & Davies γ. A total of 51.3% of boys and 26.2% of girls achieved 60 min/day of MVPA on average. Daily MVPA was lower during the weekend (23.6% of boys and 13.6% of girls comply with the recommended 60 min/day of MVPA) compared to weekdays (60.8% and 35.4%, boys and girls, respectively). Normal weight children were more active than obese children and no effect was found for biological maturation. Tracking is low in both boys (γ = 0.59 ± 0.01) and girls (γ = 0.56 ± 0.01). Children’s MVPA levels during a week are highly unstable. In summary, boys are more active than girls, maturation does not affect their MVPA, and obese children are less likely to meet 60 min/day of MVPA. These results highlight the importance of providing opportunities for increasing children’s daily MVPA on all days of week, especially on the weekend.

Description: Since the late 1970s, the Chinese government has initiated ecological restoration programs in the Three North Shelter Forest System Project (TNSFSP) area. Whether accelerated climate change will help or hinder these efforts is still poorly understood. Using the updated and extended AVHRR NDVI3g dataset from 1982 to 2011 and corresponding climatic data, we investigated vegetation variations in response to climate change. The results showed that the overall state of vegetation in the study region has improved over the past three decades. Vegetation cover significantly decreased in 23.1% and significantly increased in 21.8% of the study area. An increase in all three main vegetation types (forest, grassland, and cropland) was observed, but the trend was only statistically significant in cropland. In addition, bare and sparsely vegetated areas, mainly located in the western part of the study area, have significantly expanded since the early 2000s. A moisture condition analysis indicated that the study area experienced significant climate variations, with warm-wet conditions in the western region and warm-dry conditions in the eastern region. Correlation analysis showed that variations in the Normalized Difference Vegetation Index (NDVI) were positively correlated with precipitation and negatively correlated with temperature. Ultimately, climate change influenced vegetation growth by controlling the availability of soil moisture. Further investigation suggested that the positive impacts of precipitation on NDVI have weakened in the study region, whereas the negative impacts from temperature have been enhanced in the eastern study area. However, over recent years, the negative temperature impacts have been converted to positive impacts in the western region. Considering the variations in the relationship between NDVI and climatic variables, the warm–dry climate in the eastern region is likely harmful to vegetation growth, whereas the warm–wet conditions in the western region may promote vegetation growth.

Description: In this paper, we propose a distributed data-gathering scheme using an autonomous underwater vehicle (AUV) working as a mobile sink to gather data from a randomly distributed underwater sensor network where sensor nodes are clustered around several cluster headers. Unlike conventional data-gathering schemes where the AUV visits either every node or every cluster header, the proposed scheme allows the AUV to visit some selected nodes named path-nodes in a way that reduces the overall transmission power of the sensor nodes. Monte Carlo simulations are performed to investigate the performance of the proposed scheme compared with several preexisting techniques employing the AUV in terms of total amount of energy consumption, standard deviation of each node’s energy consumption, latency to gather data at a sink, and controlling overhead. Simulation results show that the proposed scheme not only reduces the total energy consumption but also distributes the energy consumption more uniformly over the network, thereby increasing the lifetime of the network.

Description: three-dimensional integrated circuit (3D-IC) structure with a significant scale mismatch causes difficulty in analytic model construction. This paper proposes a simulation technique to introduce an equivalent material composed of microbumps and their surrounding wafer level underfill (WLUF). The mechanical properties of this equivalent material, including Young’s modulus (E), Poisson’s ratio, shear modulus, and coefficient of thermal expansion (CTE), are directly obtained by applying either a tensile load or a constant displacement, and by increasing the temperature during simulations, respectively. Analytic results indicate that at least eight microbumps at the outermost region of the chip stacking structure need to be considered as an accurate stress/strain contour in the concerned region. In addition, a factorial experimental design with analysis of variance is proposed to optimize chip stacking structure reliability with four factors: chip thickness, substrate thickness, CTE, and E-value. Analytic results show that the most significant factor is CTE of WLUF. This factor affects microbump reliability and structural warpage under a temperature cycling load and high-temperature bonding process. WLUF with low CTE and high E-value are recommended to enhance the assembly reliability of the 3D-IC architecture.

Description: Nanoporous metals (NPMs) have proven to be all-round candidates in versatile and diverse applications. In this decade, interest has grown in the fabrication, characterization and applications of these intriguing materials. Most existing reviews focus on the experimental and theoretical works rather than the numerical simulation. Actually, with numerous experiments and theory analysis, studies based on computer simulation, which may model complex microstructure in more realistic ways, play a key role in understanding and predicting the behaviors of NPMs. In this review, we present a comprehensive overview of the computer simulations of NPMs, which are prepared through chemical dealloying. Firstly, we summarize the various simulation approaches to preparation, processing, and the basic physical and chemical properties of NPMs. In this part, the emphasis is attached to works involving dealloying, coarsening and mechanical properties. Then, we conclude with the latest progress as well as the future challenges in simulation studies. We believe that highlighting the importance of simulations will help to better understand the properties of novel materials and help with new scientific research on these materials.

Description: Congestion pricing strategy has been recognized as an effective countermeasure in the practical field of urban traffic congestion mitigation. In this paper, a bi-level programming model considering carbon dioxide emission is proposed to mitigate traffic congestion and reduce carbon dioxide emissions. The objective function of the upper level model is to minimize the sum of travel costs and the carbon dioxide emissions costs. The lower level is a multi-modal transportation network equilibrium model. To solve the model, the method of successive averages (MSA) and the shuffled frog leaping algorithm (SFLA) are introduced. The proposed method and algorithm are tested through the numerical example. The results show that the proposed congestion pricing strategy can mitigate traffic congestion and reduce carbon emissions effectively.

Description: Scenario based approach for multiple source Tsunami Hazard assessment for Sines, Portugal Natural Hazards and Earth System Sciences Discussions, 3, 4663-4693, 2015 Author(s): M. Wronna, R. Omira, and M. A. Baptista In this paper, we present a scenario-based approach for tsunami hazard assessment for the city and harbour of Sines – Portugal, one of the test-sites of project ASTARTE. Sines holds one of the most important deep-water ports which contains oil-bearing, petrochemical, liquid bulk, coal and container terminals. The port and its industrial infrastructures are facing the ocean southwest towards the main seismogenic sources. This work considers two different seismic zones: the Southwest Iberian Margin and the Gloria Fault. Within these two regions, we selected a total of six scenarios to assess the tsunami impact at the test site. The tsunami simulations are computed using NSWING a Non-linear Shallow Water Model With Nested Grids. In this study, the static effect of tides is analysed for three different tidal stages MLLW (mean lower low water), MSL (mean sea level) and MHHW (mean higher high water). For each scenario, inundation is described by maximum values of wave height, flow depth, drawback, runup and inundation distance. Synthetic waveforms are computed at virtual tide gauges at specific locations outside and inside the harbour. The final results describe the impact at Sines test site considering the single scenarios at mean sea level, the aggregate scenario and the influence of the tide on the aggregate scenario. The results confirm the composite of Horseshoe and Marques Pombal fault as the worst case scenario. It governs the aggregate scenario with about 60 % and inundates an area of 3.5 km 2 .

Description: Multispectral, as well as multi-temporal, satellite images, coupled with measurements, in situ, have been widely applied to the water quality monitoring of reservoirs. However, the spatial resolutions of the current multispectral satellite imageries are inadequate for trophic state mapping of small reservoirs which merely cover several hectares. Moreover, the temporal gap between effective satellite imaging and measurements, in situ, is usually a few days or weeks; this time lag hampers the establishment of regression models between band ratios and water quality parameters. In this research, the RGB and NIR sensors carried on an unmanned aerial vehicle (UAV) were applied to the trophic state mapping of Tain-Pu reservoir, which is one of the small reservoirs in Kinmen, Taiwan. Due to the limited sampling points and the uncertainty of water fluidity, the average method and the matching pixel-by-pixel (MPP) method were employed to search for the optimal regression models. The experimental results indicate that the MPP method can lead to better regression models than the average method, and the trophic state maps show that the averages of Chl-a, TP, and SD are 179.7 μg·L−1, 108.4 μg·L−1, and 1.4 m, respectively.

Description: In this study, a methodology for glacier elevation reconstruction from Digital Elevation Model (DEM) time series (tDEM) is described for modeling the evolution of glacier elevation and estimating related volume change, with focus on medium-resolution and noisy satellite DEMs. The method is robust with respect to outliers in individual DEM products. Fox Glacier and Franz Josef Glacier in New Zealand are used as test cases based on 31 Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) DEMs and the Shuttle Radar Topography Mission (SRTM) DEM. We obtained a mean surface elevation lowering rate of −0.51 ± 0.02 m·a−1 and −0.09 ± 0.02 m·a−1 between 2000 and 2014 for Fox and Franz Josef Glacier, respectively. The specific volume difference between 2000 and 2014 was estimated as −0.77 ± 0.13 m·a−1 and −0.33 ± 0.06 m·a−1 by our tDEM method. The comparably moderate thinning rates are mainly due to volume gains after 2013 that compensate larger thinning rates earlier in the series. Terminus thickening prevailed between 2002 and 2007.

Description: The aim of this paper is to propose a methodology combing multi-temporal X-band SAR images (TerraSAR-X) with continuous ground thetaprobe measurements, for the retrieval of surface soil moisture and texture at a high spatial resolution. Our analysis is based on seven radar images acquired at a 36° incidence angle in the HH polarization, over a semi-arid site in Tunisia (North Africa). The soil moisture estimations are based on an empirical change detection approach using TerraSAR-X data and ground auxiliary thetaprobe network measurements. Two assumptions were tested: (1) roughness variations during the three-month radar acquisition campaigns were not accounted for; (2) a simple correction for temporal variations in roughness was included. The results reveal a small improvement in the estimation of soil moisture when a correction for temporal variations in roughness is introduced. By considering the estimated temporal dynamics of soil moisture, a methodology is proposed for the retrieval of clay and sand content (expressed as percentages) in soil. Two empirical relationships were established between the mean moisture values retrieved from the seven acquired radar images and the two soil texture components over 36 test fields. Validation of the proposed approach was carried out over a second set of 34 fields, showing that highly accurate clay estimations can be achieved. Maps of soil moisture, clay and sand percentages at the studied site are derived.

Description: In close-range photogrammetry, images are difficult to acquire and organize primarily because of the limited field of view (FOV) of digital cameras when long focal lenses are used to measure large targets. To overcome this problem, we apply a scanning photography method that acquires images by rotating the camera in both horizontal and vertical directions at one station. This approach not only enlarges the FOV of each station but also ensures that all stations are distributed in order without coverage gap. We also conduct a modified triangulation according to the traits of the data overlapping among images from the same station to avoid matching all images with one another. This algorithm synthesizes the images acquired from the same station into synthetic images, which are then used to generate a free network. Consequently, we solve the exterior orientation elements of each original camera image in the free network and perform image matching among original images to obtain tie points. Finally, all original images are combined in self-calibration bundle adjustment with control points. The feasibility and precision of the proposed method are validated by testing it on two fields using 300 and 600 mm lenses. The results confirm that even with a small amount of control points, the developed scanning photogrammetry can steadily achieve millimeter scale accuracy at distances ranging from 40 m to 250 m.

Description: A new high-precision and low-power GNSS receiver for long-term installations in remote areas Geoscientific Instrumentation, Methods and Data Systems Discussions, 5, 285-310, 2015 Author(s): D. H. Jones, C. Robinson, and G. H. Gudmundsson We have developed a new high-precision GNSS receiver specifically designed for long-term unattended deployments in remote areas. The receiver reports its status, and can be reprogrammed remotely, through an integrated satellite data link. It uses less power than commercially available alternatives while being equally, if not more, accurate. Data is saved locally on dual SD card slots for increased reliability. Deployments of a number those receivers in several different locations on the Antarctic Ice Sheet have shown them to robust and able to operate flawlessly at low temperatures down to −40 °C.

Description: We investigated the synergetic effect between light-emitting diode (LED) lighting efficiency and building energy savings in heating and cooling using an alternative thermal operating system (ATOS) of indoor LED lighting integrated with the ventilation system of a building as an active cooling device. The heat generated from LED lighting and the indoor lighting illuminance were experimentally determined. The indoor heat gains in cooling and heating periods were determined using measurement data; the annual energy savings of an office building in heating and cooling were calculated through simulation. The LED lighting illuminance increased by approximately 40% and the lighting contribution for indoor heat gain was 7.8% in summer, while 69.8% in winter with the ATOS. Consequently, the annual total energy use of the office building could be reduced by 5.9%; the energy use in cooling and heating was reduced by 18.4% and 3.3%, respectively.

Description: The impact of near-surface soil moisture assimilation at subseasonal, seasonal, and inter-annual time scales Hydrology and Earth System Sciences Discussions, 12, 7971-8004, 2015 Author(s): C. Draper and R. Reichle Nine years of Advanced Microwave Scanning Radiometer – Earth Observing System (AMSR-E) soil moisture retrievals are assimilated into the Catchment land surface model at four locations in the US. The assimilation is evaluated using the unbiased Mean Square Error (ubMSE) relative to watershed-scale in situ observations, with the ubMSE separated into contributions from the subseasonal (SM short ), mean seasonal (SM seas ) and inter-annual (SM long ) soil moisture dynamics. For near-surface soil moisture, the average ubMSE for Catchment without assimilation was (1.8 × 10 −3 m 3 m −3 ) 2 , of which 19 % was in SM long , 26 % in SM seas , and 55 % in SM short . The AMSR-E assimilation significantly reduced the total ubMSE at every site, with an average reduction of 33 %. Of this ubMSE reduction, 37 % occurred in SM long , 24 % in SM seas , and 38 % in SM short . For root-zone soil moisture, in situ observations were available at one site only, and the near-surface and root-zone results were very similar at this site. These results suggest that, in addition to the well-reported improvements in SM short , assimilating a sufficiently long soil moisture data record can also improve the model representation of important long term events, such as droughts. The improved agreement between the modeled and in situ SM seas is harder to interpret, given that mean seasonal cycle errors are systematic, and systematic errors are not typically targeted by (bias-blind) data assimilation. Finally, the use of one year subsets of the AMSR-E and Catchment soil moisture for estimating the observation-bias correction (rescaling) parameters is investigated. It is concluded that when only one year of data is available, the associated uncertainty in the rescaling parameters should not greatly reduce the average benefit gained from data assimilation, but locally and in extreme years there is a risk of increased errors.

Description: The microbiological sanitary quality and safety of leafy greens and strawberries were assessed in the primary production in Belgium, Brazil, Egypt, Norway and Spain by enumeration of Escherichia coli and detection of Salmonella, Shiga toxin-producing E. coli (STEC) and Campylobacter. Water samples were more prone to containing pathogens (54 positives out of 950 analyses) than soil (16/1186) and produce on the field (18/977 for leafy greens and 5/402 for strawberries). The prevalence of pathogens also varied markedly according to the sampling region. Flooding of fields increased the risk considerably, with odds ratio (OR) 10.9 for Salmonella and 7.0 for STEC. A significant association between elevated numbers of generic E. coli and detection of pathogens (OR of 2.3 for STEC and 2.7 for Salmonella) was established. Generic E. coli was found to be a suitable index organism for Salmonella and STEC, but to a lesser extent for Campylobacter. Guidelines on frequency of sampling and threshold values for E. coli in irrigation water may differ from region to region.

Description: The objective of this research is to provide a standardized platform to monitor and predict indicators of people with traumatic brain injury using the International Classification of Functioning, Disability and Health, and analyze its potential benefits for people with disabilities, health centers and administrations. We developed a platform that allows automatic standardization and automatic graphical representations of indicators of the status of individuals and populations. We used data from 730 people with acquired brain injury performing periodic comprehensive evaluations in the years 2006–2013. Health professionals noted that the use of color-coded graphical representation is useful for quickly diagnose failures, limitations or restrictions in rehabilitation. The prognosis system achieves 41% of accuracy and sensitivity in the prediction of emotional functions, and 48% of accuracy and sensitivity in the prediction of executive functions. This monitoring and prognosis system has the potential to: (1) save costs and time, (2) provide more information to make decisions, (3) promote interoperability, (4) facilitate joint decision-making, and (5) improve policies of socioeconomic evaluation of the burden of disease. Professionals found the monitoring system useful because it generates a more comprehensive understanding of health oriented to the profile of the patients, instead of their diseases and injuries.

Description: Objectives: In 2005, China acceded to the World Health Organization Framework Convention on Tobacco Control (WHO FCTC), the foundation for the global fight against tobacco. Certain cities in China have established local regulations to control tobacco use ahead of national policy; however, without the enforcement of statutory law, some of these regulations are merely lip service. The aim of the study was to assess the effects of city policy on smoking prevalence and on second-hand smoke (SHS) exposure status among non-smokers in Changchun City. Methods: A cross-sectional survey covering a multiple-stage, representative sample of the urban population aged ≥15 years was conducted between 1 Dec 2013 and 31 Jan 2014. The WHO and the US Centers for Disease Control and Prevention developed the questionnaires used, which included demographic characteristics, smoking behaviors and SHS exposure status. Results: Overall cigarette smoking prevalence was 23.5%; daily cigarette smoking prevalence was 21.2%. Smoking prevalence and cigarettes consumed per day was higher among men (p 〈 0.05) and those aged 45–64 years (p 〈 0.05). Among current smokers, 8.1% planned to quit within 12 months; 53.4% had no intention of quitting. Overall SHS exposure prevalence was 41.9% (workplace) and 34.1% (at home) over the previous 30 days. The weighted workplace SHS exposure prevalence increased with age. Conclusions: The high proportion of smokers with no intention of quitting and the high level of SHS exposure may constitute one of the most significant barriers to successful smoking cessation in the city. A continued drive to promote full implementation of the WHO FCTC is still needed.