ALBERT

Description: The use of alloplastic materials instead of autologous cartilage grafts offers a new perspective in craniofacial reconstructive surgery. Particularly for regenerative approaches, customized implants enable the surgeon to restore the cartilaginous framework of the ear without donor site morbidity. However, high development and production costs of commercially available implants impede clinical translation. For this reason, the usability of a low-cost 3D printer (Ultimaker 2+) as an inhouse-production tool for cheap surgical implants was investigated. The open software architecture of the 3D printer was modified in order to enable printing of biocompatible and biologically degradable polycaprolactone (PCL). Firstly, the printing accuracy and limitations of a PCL implant were compared to reference materials acrylonitrile butadiene styrene (ABS) and polylactic acid (PLA). Then the self-made PCL-scaffold was seeded with adipose-tissue derived stem cells (ASCs), and biocompatibility was compared to a commercially available PCL-scaffold using a cell viability staining (FDA/PI) and a dsDNA quantification assay (PicoGreen). Secondly, porous and solid patient-customized ear constructs were manufactured from mirrored CT-imagining data using a computer-assisted design (CAD) and computer-assisted manufacturing (CAM) approach to evaluate printing accuracy and reproducibility. The results show that printing of a porous PCL scaffolds was possible, with an accuracy equivalent to the reference materials at an edge length of 10 mm and a pore size of 0.67 mm. Cell viability, adhesion, and proliferation of the ASCs were equivalent on self-made and the commercially available PCL-scaffolds. Patient-customized ear constructs could be produced well in solid form and with limited accuracy in porous form from all three thermoplastic materials. Printing dimensions and quality of the modified low-cost 3D printer are sufficient for selected tissue engineering applications, and the manufacturing of personalized ear models for surgical simulation at manufacturing costs of EUR 0.04 per cell culture scaffold and EUR 0.90 (0.56) per solid (porous) ear construct made from PCL. Therefore, in-house production of PCL-based tissue engineering scaffolds and surgical implants should be further investigated to facilitate the use of new materials and 3D printing in daily clinical routine.

Description: Macadamia (Macadamia integrifolia) is endemic to eastern Australia and produces an edible nut that is widely cultivated in commercial orchards globally. A survey of fungi associated with the grey and green mold symptoms of macadamia flowers found mostly species of Botrytis (Sclerotiniaceae, Leotiomycetes) and Cladosporium (Cladosporiaceae, Dothideomycetes). These isolates included B. cinerea, C. cladosporioides, and unidentified isolates. Amongst the unidentified isolates, one novel species of Botrytis and three novel species of Cladosporium were delimited and characterized by molecular phylogenetic analyses. The new species are Botrytis macadamiae, Cladosporium devikae, C. macadamiae, and C. proteacearum.

Description: The spread of coronavirus disease (COVID-19) has triggered a series of responses worldwide ranging from traveling restrictions and shelter-in-place orders to lockdowns, contact tracing, social distancing, and other mitigation measures. To assist with contact tracing and ensure the safety of citizens, a significant number of mobile applications has been developed, utilizing geospatial information and proximity sensing. We perform a thorough research on seven digital databases (Appbrain, e-Health Hub, GDPRhub, “fs0c131y”, News Sites, Appstore, and Google Play), identifying a total of 160 apps regarding COVID-19 related to our research questions. The aim of this research is to identify the main categories of apps and analyze their functions based on a proposed framework of by mapping aspects that affect their functionalities regarding Services, Technology, Societal & Business, and Legal aspects. As the world comes to the new normal, the utilization of these apps might become more essential for more mobile users and developers. The new encryption protocols that are established are also in favor of this argument. Future work can utilize our framework to further examine the development, design, and adoption of such mobile applications.

Description: A basic assumption of many scientific theories on the topic of decision making is rational behaviour. However, previous authors assume the existence of behavioural biases in freight transport which impede rational decision making. Hardly any research exists on behavioural biases in freight transport. To address this gap, we carry out a systematic literature review on the influencing factors of freight mode choice and provide empirical evidence for the occurrence of behavioural biases in the logistics sector. Fifteen logistics service providers and six shippers are involved in interviews and a focus group to understand their mode choice process and derive information on the existence of behavioural biases. Several biases showed to exist in the practical decision-making process. For example, decision makers tend to avoid complex options (principle of least effort), they stick to already tried and tested options (status quo bias, zero-risk bias) and they tend to make decisions based on immediate and easily accessible information (availability bias). These biases distort the demand for sustainable freight transport. We therefore conclude with several motivational, cognitive and technological debiasing strategies to reduce the negative impact of behavioural biases in freight transport.

Description: Regional climate change assessments show a likely temperature increase that is higher than the global average for all seasons in Africa, which would have extreme negative implications for ecosystem health and productivity. Most extreme climate change effects in West Africa are predicted to occur in desert and grassland areas. It is important for smallholder farmers in this region to understand the implications of these projections to their livelihood and to identify appropriate adaptation strategies. A grazing game was used to explore gender-specific adaptive responses to climate variability in the semiarid region of Ghana. The game was designed to understand the decision-making processes that result in the overgrazing of animals, leading to desertification based on the players’ interactions with the environment. A total of 44 grazing games comprising 22 games for male-headed households (HH) and 22 games for female-HH were played from August to December 2014 from 14 communities within the Bolgatanga Municipality and the Bongo district. The study revealed that males migrate to the southern part of the country to work on other people’s farms during the dry season as an adaptation strategy, while females engage in off-farm activities such as shea-butter production and basketry. Results of the game showed that males produced the highest number of cattle but created the largest desert patches. Females, on the other hand, were more conscious about the environment (long-term condition of the rangeland) than the short-term income benefits from the sale of cattle; hence, they created fewer desert patches. Strategies such as reducing the number of cattle to allow for the re-growth of vegetation in periods of feed scarcity, ploughing for one another using bulls, and family support using income from the sale of livestock were employed by both gender groups. The involvement of female farmers in decision-making is crucial to improve natural resource management.

Description: Through exploring specific conditions (diabetes, heart failure, related vascular/metabolic diagnoses) and their multimorbidities, I develop a more thorough means to adjust confounders of clinical targets within main or interactive contexts in epidemiological panel studies. Regression-based multiple indicators-multiple causes (MIMIC) models combine multiple or moderated regression and confirmatory factor analysis. In a novel specification, each of twenty depressive symptoms is both a “formative” (causal) indicator and a “reflective” (effect) indicator of a latent trait (Depression). Although both indicators provide identical information (under different variable names), formative indicators provide “exogenous” information (outside the model) to estimate, within groups or subgroups, “endogenous” effects (recovered by the model) from the latent trait and its reflective indicators. Formative indicators within the multiple regressions constitute comprehensive proxies for unspecified confounders by completely mediating all unspecified confounder effects on the endogenous latent trait and its reflective indicators, the latter estimated through confirmatory factor analysis. Findings of symptom clusters of Depression in these specific conditions, and in subgroups that capture their synergies, corroborate parallel MIMIC models with instrumental variables that specify several known confounders, but suggest some confounding biases remain. All multimorbidities involve synergy from co-occurring diabetes and heart failure. There may be opportunities to target screening and optimize metformin treatment for these co-occurring conditions. This strategy avoids the need to specify all confounders, which may not be possible or verifiable.

Description: The Y Balance Test (YBT) is a dynamic balance assessment typically used in sports medicine. This work proposes a deep learning approach to automatically score this YBT by estimating the normalized reach distance (NRD) using a wearable sensor to register inertial signals during the movement. This paper evaluates several signal processing techniques to extract relevant information to feed the deep neural network. This evaluation was performed using a state-of-the-art human activity recognition system based on recurrent neural networks (RNNs). This deep neural network includes long short-term memory (LSTM) layers to learn features from time series by modeling temporal patterns and an additional fully connected layer to estimate the NRD (normalized by the leg length). All analyses were carried out using a dataset with YBT assessments from 407 subjects, including young and middle-aged volunteers and athletes from different sports. This dataset allowed developing a global and robust solution for scoring the YBT in a wide range of applications. The experimentation setup considered a 10-fold subject-wise cross-validation using training, validation, and testing subsets. The mean absolute percentage error (MAPE) obtained was 7.88 ± 0.20%. Moreover, this work proposes specific regression systems to estimate the NRD for each direction separately, obtaining an average MAPE of 7.33 ± 0.26%. This deep learning approach was compared to a previous work using dynamic time warping and k-NN algorithms, obtaining a relative MAPE reduction of 10%.

Description: The influence of four naturally occurring mineral additives (zeolite, diatomite, trass and bentonite) on the hydration and properties of cement pastes and mortars was investigated. The materials change the phase composition, heat of hydration (determined by calorimetry) and mechanical properties of composites. After 28 days, the amount of Ca(OH)2 was reduced by up to 23% and up to 35% more C-S-H was formed, as proved by TG measurements. Differences were observed in the kinetics of heat release, especially for 25% of the addition. In the calorimetric curves, an additional exothermic effect is observed, related to the alteration in the hydration of C3A in cement. From the point of view of beneficial influence on mechanical properties of mortars, the additives could be ranked as follows: bentonite 〈 diatomite, zeolite 〈 trass after 2 days and bentonite 〈 diatomite 〈 trass 〈 zeolite after 28 days of curing. The highest compressive strength (58.5 MPa) was observed for the sample with a 10% addition of zeolite. Zeolite, trass, bentonite and diatomite are all pozzolanic materials; however, their activity varies to an extent due to the differences in their specific surface area and the content of the amorphous phase, responsible for the pozzolanic reaction.

Description: While the shelterin complex guards and coordinates the mechanism of telomere regulation, deregulation of this process is tightly linked to malignant transformation and cancer. Here, we present the novel finding of a germline stop-gain variant (p.Q199*) in the shelterin complex gene POT1, which was identified in a child with acute myeloid leukemia. We show that the cells overexpressing the mutated POT1 display increased DNA damage and chromosomal instabilities compared to the wildtype counterpart. Protein and mRNA expression analyses in the primary patient cells further confirm that, physiologically, the variant leads to a nonfunctional POT1 allele in the patient. Subsequent telomere length measurements in the primary cells carrying heterozygous POT1 p.Q199* as well as POT1 knockdown AML cells revealed telomeric elongation as the main functional effect. These results show a connection between POT1 p.Q199* and telomeric dysregulation and highlight POT1 germline deficiency as a predisposition to myeloid malignancies in childhood.

Description: Besides their role in cell metabolism, mitochondria display many other functions. Mitochondrial DNA (mtDNA), the own genome of the organelle, plays an important role in modulating the inflammatory immune response. When released from the mitochondrion to the cytosol, mtDNA is recognized by cGAS, a cGAMP which activates a pathway leading to enhanced expression of type I interferons, and by NLRP3 inflammasome, which promotes the activation of pro-inflammatory cytokines Interleukin-1beta and Interleukin-18. Furthermore, mtDNA can be bound by Toll-like receptor 9 in the endosome and activate a pathway that ultimately leads to the expression of pro-inflammatory cytokines. mtDNA is released in the extracellular space in different forms (free DNA, protein-bound DNA fragments) either as free circulating molecules or encapsulated in extracellular vesicles. In this review, we discussed the latest findings concerning the molecular mechanisms that regulate the release of mtDNA from mitochondria, and the mechanisms that connect mtDNA misplacement to the activation of inflammation in different pathophysiological conditions.

Description: Business organizations all around the globe are looking to expand circular models into their supply chains to harness economic and environmental benefits. Moreover, the act of giving incentives to retailers by the manufacturer is also quite prevalent in the present business environment. These incentives are offered to promote the sales of products of a manufacturer. Therefore, this paper examines the optimal decisions for a dual-retailer closed-loop supply chain (CLSC) in which the manufacturer bestows the credit period to the one retailer (a firm that possesses shallow market penetration and has a higher insistence on the usage of the capital venture), and cash discount to the next retailer (a firm that occupies the market to a greater extent and receives lower thrust on the usage of invested capital) under a non-coordinated system and coordinated systems. This study proposes the mathematical model to determine the optimal decisions of the manufacturer in terms of credit period and cash discount and also compute the optimal decisions of the retailers for their retail prices and order quantities to maximize individual’s profit in the CLSC. Moreover, numerical analysis and sensitivity analysis is performed to get insights into the optimal decisions of the manufacturer and retailers. The results of sensitivity analysis show that credit period and cash discount increases with the rise in price elasticity, and decreases with an increase in cross-price elasticity. The findings also confirm that members of dual-retailer CLSC under coordination and manufacture’s incentive scenario generate higher environmental and economic benefits required to attain sustainability in production and consumption.

Description: Aluminothermic combustion synthesis was conducted with Fe2O3–Al–Fe–Si reaction systems under Fe/Si stoichiometry from Fe-20 to Fe-50 at. % Si to investigate the formation Fe3Si/FeSi–Al2O3 composites. The solid-state combustion was sufficiently exothermic to sustain the overall reaction in the mode of self-propagating high-temperature synthesis (SHS). Dependence of iron silicide phases formed from SHS on Fe/Si stoichiometry was examined. Experimental evidence indicated that combustion exothermicity and flame-front velocity were affected by the Si percentage. According to the X-ray diffraction (XRD) analysis, Fe3Si–Al2O3 composites were synthesized from the reaction systems with Fe-20 and Fe-25 at.% Si. The increase of Si content led to the formation of both Fe3Si and FeSi in the final products of Fe-33.3 and Fe-40 at.% Si reaction systems, and the content of FeSi increased with Si percentage. Further increase of Si to Fe-50 at.% Si produced the FeSi–Al2O3 composite. Scanning electron microscopy (SEM) images revealed that the fracture surface morphology of the products featured micron-sized and nearly spherical Fe3Si and FeSi particles distributing over the dense and connecting substrate formed by Al2O3.

Description: Background: In this study, we aimed to identify factors correlating with satisfaction with orthognathic surgery in order to improve its outcome. Methods: We recruited 77 participants who had received orthognathic surgery and 32 age- and gender-matched normal-controls. Questionnaires that included devised questions for family support, Big Five Inventory, Derriford Appearance Score, Pittsburgh Sleep Quality Index, Hospital Anxiety and Depression Scale, 36-Item Short-Form Health Survey, and a visual analogy scale for satisfaction, were completed before and one month and nine months after the surgery. The statistical analysis methods included descriptive statistics, t-test, and Pearson correlation. Results: All participants received the preoperative and one-month follow-up, while 28 also completed the nine-month follow-up. Satisfaction was not significantly related to demographic data, but long-term satisfaction was related to an extraverted personality. The preoperative and postoperative results of the Derriford Appearance Scale were related to short-term and long-term satisfaction. Furthermore, both the preoperative and one-month postoperative Pittsburgh Sleep Quality Index findings were significantly related to short-term satisfaction. The postoperative 36-Item Short-Form Health Survey was significantly related to short-term and long-term satisfaction. Conclusions: Not only subjective distress and dysfunction of appearance but also sleep problems and quality of life were correlated to satisfaction with orthognathic surgery. In the future, relevant interventions can be developed to further improve patient’s satisfaction and their physical and mental health.

Description: Avian cranial anatomy is constrained by the competing (or complementary) requirements and costs of various facial, muscular, sensory, and central neural structures. However, these constraints may operate differently in flighted versus flightless birds. We investigated cranial sense organ morphology in four lineages of flightless birds: kiwi (Apteryx), the Kakapo (Strigops habroptilus), and the extinct moa (Dinornithiformes) from New Zealand; and the extinct elephant birds from Madagascar (Aepyornithidae). Scleral ring and eye measurements suggest that the Upland Moa (Megalapteryx didinus) was diurnal, while measurements for the Kakapo are consistent with nocturnality. Kiwi are olfactory specialists, though here we postulate that retronasal olfaction is the dominant olfactory route in this lineage. We suggest that the Upland Moa and aepyornithids were also olfactory specialists; the former additionally displaying prominent bill tip sensory organs implicated in mechanoreception. Finally, the relative size of the endosseous cochlear duct revealed that the Upland Moa had a well-developed hearing sensitivity range, while the sensitivity of the kiwi, Kakapo, and aepyornithids was diminished. Together, our results reveal contrasting sensory strategies among extant and extinct flightless birds. More detailed characterisation of sensory capacities and cranial anatomy in extant birds may refine our ability to make accurate inferences about the sensory capacities of fossil taxa.

Description: A generalized proportional vector-order fractional derivative in the Caputo sense is defined and studied. Two types of existence results for the mild solutions of the initial value problem for nonlinear Caputo-type generalized proportional vector-order fractional differential equations are obtained. With the aid of the Leray–Schauder nonlinear alternative and the Banach contraction principle, the main results are established. In the case of a local Lipschitz right hand side part function, the existence of a bounded mild solution is proved. Some examples illustrating the main results are provided.

Description: Group B Streptococcus (GBS) is an important pathogen of neonatal infections, and the clonal complex (CC)-17/serotype III GBS strain has emerged as the dominant strain. The clinical manifestations of CC17/III GBS sepsis may vary greatly but have not been well-investigated. A total of 103 CC17/III GBS isolates that caused neonatal invasive diseases were studied using a new approach based on clustered regularly interspaced short palindromic repeats (CRISPR) loci and restriction fragment length polymorphism (RFLP) analyses. All spacers of CRISPR loci were sequenced and analyzed with the clinical presentations. After CRISPR-RFLP analyses, a total of 11 different patterns were observed among the 103 CRISPR-positive GBS isolates. GBS isolates with the same RFLP patterns were found to have highly comparable spacer contents. Comparative sequence analysis of the CRISPR1 spacer content revealed that it is highly diverse and consistent with the dynamics of this system. A total of 29 of 43 (67.4%) spacers displayed homology to reported phage and plasmid DNA sequences. In addition, all CC17/III GBS isolates could be categorized into three subgroups based on the CRISPR-RFLP patterns and eBURST analysis. The CC17/III GBS isolates with a specific CRISPR-RFLP pattern were more significantly associated with occurrences of severe sepsis (57.1% vs. 29.3%, p = 0.012) and meningitis (50.0% vs. 20.8%, p = 0.009) than GBS isolates with RFLP lengths between 1000 and 1300 bp. Whole-genome sequencing was also performed to verify the differences between CC17/III GBS isolates with different CRISPR-RFLP patterns. We concluded that the CRISPR-RFLP analysis is potentially applicable to categorizing CC17/III GBS isolates, and a specific CRISPR-RFLP pattern could be used as a new biomarker to predict meningitis and illness severity after further verification.

Description: Atherosclerosis and related cardiovascular diseases represent the greatest threats to human health, worldwide. Previous animal studies showed that selenium nanoparticles (SeNPs) and Na2SeO3 might have anti-atherosclerotic activity, but the underlying mechanisms are poorly elucidated. This study compared the anti-atherosclerotic activity of SeNPs stabilized with chitosan (CS-SeNPs) and Na2SeO3 and the related mechanism in a high-fat-diet-fed apolipoprotein E-deficient mouse model of atherosclerosis. The results showed that oral administration of both CS-SeNPs and Na2SeO3 (40 μg Se/kg/day) for 10 weeks significantly reduced atherosclerotic lesions in mouse aortae. Mechanistically, CS-SeNPs and Na2SeO3 not only alleviated vascular endothelial dysfunction, as evidenced by the increase of serum nitric oxide level and the decrease of aortic adhesion molecule expression, but also vascular inflammation, as evidenced by the decrease of macrophage recruitment as well as the expression of proinflammatory molecules. Importantly, these results were replicated within in-vivo experiments on the cultured human endothelial cell line EA.hy926. Overall, CS-SeNPs had a comparable effect with Na2SeO3 but might have more potential in atherosclerosis prevention due to its lower toxicity. Together, these results provide more insights into the mechanisms of selenium against atherosclerosis and further highlight the potential of selenium supplementation as a therapeutic strategy for atherosclerosis.

Description: Background/Purpose: Over the last two decades, malaria has remained a major public health concern worldwide, especially in developing countries leading to high morbidity and mortality among children. Nigeria is the world most burdened malaria endemic nation, contributing more than a quarter of global malaria cases. This study determined the prevalence of malaria among children at 6–59 months in Nigeria, and the effects of individual and contextual factors. Methods: This study utilized data from 2018 Nigeria Demographic and Health Survey (NDHS) involving a weighted sample size of 10,185 children who were tested for malaria using rapid diagnostic test (RDT). Given the hierarchical structure of the data set, such that children at Level-1 were nested in communities at Level-2, and nested in states and Federal Capital Territory (FCT) at Level-3, multilevel mixed effect logistic regression models were used for the analysis. Results: The proportion of children 6–59 months of age in Nigeria that had malaria fever positive as assessed by RDTs was 35.5% (3418/10,185), (CI: 33.9–37.1). Kebbi State had 77.7%, (CI: 70.2–83.5), which was the highest proportion of 6–59 months who were malaria positive, next in line was Katsina State with 55.5%, (CI: 47.7–63.1). The Federal Capital Territory (FCT), Abuja had the proportion of 29.6%, (CI: 21.6–39.0), malaria positive children of 6–59 months of age. Children between the age of 48 and 59 months were 2.68 times more likely to have malaria fever than children of ages 6–11 months (AOR = 2.68, 95% CI: 2.03–3.54). In addition, children from the rural area (AOR = 2.12, 95% CI: 1.75–2.57), were more likely to suffer from malaria infection compared to children from urban area. Conclusion: The study identified some individual and contextual predictors of malaria among children in Nigeria. These factors identified in this study are potential areas that need to be considered for policy designs and implementations toward control and total elimination of malaria-related morbidity and mortality among children in Nigeria.

Description: Nowadays, more and more attention is paid to the development and the intensification of the use of renewable energy sources. Hemp might be an alternative plant for bioenergy production. In this paper, four varieties of Polish industrial hemp (Białobrzeskie, Tygra, Henola, and Rajan) were investigated in order to determine which of them are the most advantageous raw materials for the effective production of bioethanol. At the beginning, physical and chemical pretreatment of hemp biomass was carried out. It was found that the most effective is the alkaline treatment with 2% NaOH, and the biomasses of the two varieties were selected for next stages of research: Tygra and Rajan. Hemp biomass before and after pretreatment was analyzed by FTIR and SEM, which confirmed the effectiveness of the pretreatment. Next, an enzymatic hydrolysis process was carried out on the previously selected parameters using the response surface methodology. Subsequently, the two approaches were analyzed: separated hydrolysis and fermentation (SHF) and a simultaneous saccharification and fermentation (SSF) process. For Tygra biomass in the SHF process, the ethanol concentration was 10.5 g∙L−1 (3.04 m3·ha−1), and for Rajan biomass at the SSF process, the ethanol concentration was 7.5 g∙L−1 (2.23 m3·ha−1). In conclusion, the biomass of Polish varieties of hemp, i.e., Tygra and Rajan, was found to be an interesting and promising raw material for bioethanol production.

Description: Traffic congestion and the occurrence of traffic accidents are problems that can be mitigated by applying cooperative adaptive cruise control (CACC). In this work, we used deep reinforcement learning for CACC and assessed its potential to outperform model-based methods. The trade-off between distance-error minimization and energy consumption minimization whilst still ensuring operational safety was investigated. Alongside a string stability condition, robustness against burst errors in communication also was incorporated, and the effect of preview information was assessed. The controllers were trained using the proximal policy optimization algorithm. A validation by comparison with a model-based controller was performed. The performance of the trained controllers was verified with respect to the mean energy consumption and the root mean squared distance error. In our evaluation scenarios, the learning-based controllers reduced energy consumption in comparison to the model-based controller by 17.9% on average.

Description: In this paper, a robust observer-based control strategy for n-DOF uncertain robot manipulators with fixed-time stability was developed. The novel fixed-time nonsingular sliding mode surface enables control errors to converge to the equilibrium point quickly within fixed time without singularity. The development of the novel fixed-time disturbance observer based on a uniform robust exact differentiator also allows uncertain terms and exterior disturbances to be proactively addressed. The designed observer can accurately approximate uncertain terms within a fixed time and contribute to significant chattering reduction in the traditional sliding mode control. A robust observer-based control strategy was formulated, according to a combination of the fixed-time nonsingular terminal sliding mode control method and the designed observer, to yield global fixed time stability for n-DOF uncertain robot manipulators. The proposed controller proved definitively that it was able to obtain global stabilization in fixed time. The approximation capability of the proposed observer, the convergence of the proposed sliding surface, and the effectiveness of the proposed control strategy in fixed time were fully confirmed by simulation performance on an industrial robot manipulator.

Description: Regardless of the efforts of the European Union, freshwaters are in a state of environmental crisis. The Water Framework Directive has established a basis for the protection and restoration of European inland and coastal waters. In parallel, the Birds and Habitats Directives protect, maintain or restore, at favourable conservation status, selected species and habitats under a representative network of protected areas. Hence, the interplay between the EU regulations is of high scientific interest and practical relevance. In this article, Greece is used as a case study to explore whether anticipated synergies between the Water Framework Directive and the Nature Directives result in a better ecological status in the protected areas than in the non-protected ones. We investigated whether the ecological qualities that are defined by three biological quality elements (BQEs) differ between the WFD monitoring sites that are located within the Natura 2000 protected areas and those that are not. We identified a total of 148 river monitoring sites that are located within the Natura 2000 network, which corresponds to 30% of the WFD monitoring network. By employing ordered logit models for each BQE, we found that the ecological quality has the same likelihood to fail the WFD target of “good” quality for sites that are located within and outside the Natura 2000 protected areas. Our results confirmed our hypothesis that the EU directives have little synergy when it comes to restoration of ecological status of Greek running waters, according to the WFD.

Description: The cornea is a transparent and avascular tissue that plays a central role in light refraction and provides a physical barrier to the external environment. Corneal avascularity is a unique histological feature that distinguishes it from the other parts of the body. Functionally, corneal immune privilege critically relies on corneal avascularity. Corneal lymphangiogenesis is now recognized as a general pathological feature in many pathologies, including dry eye disease (DED), corneal allograft rejection, ocular allergy, bacterial and viral keratitis, and transient corneal edema. Currently, sizable data from clinical and basic research have accumulated on the pathogenesis and functional role of ocular lymphangiogenesis. However, because of the invisibility of lymphatic vessels, ocular lymphangiogenesis has not been studied as much as hemangiogenesis. We reviewed the basic mechanisms of lymphangiogenesis and summarized recent advances in the pathogenesis of ocular lymphangiogenesis, focusing on corneal allograft rejection and DED. In addition, we discuss future directions for lymphangiogenesis research.

Description: Parkinson’s disease (PD) is characterized by the progressive accumulation of neuronal intracellular aggregates largely composed of alpha-Synuclein (αSyn) protein. The process of αSyn aggregation is induced during aging and enhanced by environmental stresses, such as the exposure to pesticides. Paraquat (PQ) is an herbicide which has been widely used in agriculture and associated with PD. PQ is known to cause an increased oxidative stress in exposed individuals but the consequences of such stress on αSyn conformation remains poorly understood. To study αSyn pathogenic modifications in response to PQ, we exposed Drosophila expressing human αSyn to a chronic PQ protocol. We first showed that PQ exposure and αSyn expression synergistically induced fly mortality. The exposure to PQ was also associated with increased levels of total and phosphorylated forms of αSyn in the Drosophila brain. Interestingly, PQ increased the detection of soluble αSyn in highly denaturating buffer but did not increase αSyn resistance to proteinase K digestion. These results suggest that PQ induces the accumulation of toxic soluble and misfolded forms of αSyn but that these toxic forms do not form fibrils or aggregates that are detected by the proteinase K assay. Collectively, our results demonstrate that Drosophila can be used to study the effect of PQ or other environmental neurotoxins on αSyn driven pathology.

Description: In China, ground-level ozone has shown an increasing trend and has become a serious ambient pollutant. An accurate spatiotemporal distribution of ground-level ozone concentrations (GOCs) is urgently needed. Generalized linear models (GLMs) and Bayesian maximum entropy (BME) models are practical for predicting GOCs. However, GLMs have limited capacity to capture temporal variations and can miss some short-term and regional patterns, while the performance of BME models may degrade in cases of sparse or imperfect monitoring networks. Thus, to predict nationwide 1 km monthly average GOCs for China, we designed a novel hybrid model containing three modules. (1) A GLM was established to accurately describe the variability in GOCs in the space domain. (2) A BME model incorporating GLM residuals was employed to capture the temporal variability of GOCs in detail. (3) A combination of GLM and BME models was developed based on the specific broad range of each submodel. According to the cross-validation results, the hybrid model exhibited superior performance, with coefficient of determination (R2) values of 0.67. The predictive performance of the large-scale and high-resolution hybrid model is superior to that in previous studies. The nationwide spatiotemporal variability of the GOCs derived from the hybrid model shows that they are valuable indicators for ground-level ozone pollution control and prevention in China.

Description: Double and triple bonds have significant effects on the biological activities of lipids. Determining multiple bond positions in their molecules by mass spectrometry usually requires chemical derivatization. This work presents an HPLC/MS method for pinpointing the double and triple bonds in fatty acids. Fatty acid methyl esters were separated by reversed-phase HPLC with an acetonitrile mobile phase. In the APCI source, acetonitrile formed reactive species, which added to double and triple bonds to form [M + C3H5N]+• ions. Their collisional activation in an ion trap provided fragments helpful in localizing the multiple bond positions. This approach was applied to fatty acids with isolated, cumulated, and conjugated double bonds and triple bonds. The fatty acids were isolated from the fat body of early-nesting bumblebee Bombus pratorum and seeds or seed oils of Punicum granatum, Marrubium vulgare, and Santalum album. Using the method, the presence of the known fatty acids was confirmed, and new ones were discovered.

Description: Muscle fatigue (MF) declines the capacity of muscles to complete a task over time at a constant load. MF is usually short-lasting, reversible, and is experienced as a feeling of tiredness or lack of energy. The leading causes of short-lasting fatigue are related to overtraining, undertraining/deconditioning, or physical injury. Conversely, MF can be persistent and more serious when associated with pathological states or following chronic exposure to certain medication or toxic composites. In conjunction with chronic fatigue, the muscle feels floppy, and the force generated by muscles is always low, causing the individual to feel frail constantly. The leading cause underpinning the development of chronic fatigue is related to muscle wasting mediated by aging, immobilization, insulin resistance (through high-fat dietary intake or pharmacologically mediated Peroxisome Proliferator-Activated Receptor (PPAR) agonism), diseases associated with systemic inflammation (arthritis, sepsis, infections, trauma, cardiovascular and respiratory disorders (heart failure, chronic obstructive pulmonary disease (COPD))), chronic kidney failure, muscle dystrophies, muscle myopathies, multiple sclerosis, and, more recently, coronavirus disease 2019 (COVID-19). The primary outcome of displaying chronic muscle fatigue is a poor quality of life. This type of fatigue represents a significant daily challenge for those affected and for the national health authorities through the financial burden attached to patient support. Although the origin of chronic fatigue is multifactorial, the MF in illness conditions is intrinsically linked to the occurrence of muscle loss. The sequence of events leading to chronic fatigue can be schematically denoted as: trigger (genetic or pathological) -〉 molecular outcome within the muscle cell -〉 muscle wasting -〉 loss of muscle function -〉 occurrence of chronic muscle fatigue. The present review will only highlight and discuss current knowledge on the molecular mechanisms that contribute to the upregulation of muscle wasting, thereby helping us understand how we could prevent or treat this debilitating condition.

Description: Voltage-dependent anion channels (VDACs) are the most important proteins in mitochondria. They localize to the outer mitochondrial membrane and contribute to the metabolite transport between the mitochondria and cytoplasm, which aids plant growth regulation. Here, we report that Arabidopsis thaliana VDAC1 is involved in the floral transition, with the loss of AtVDAC1 function, resulting in an early-flowering phenotype. AtVDAC1 is expressed ubiquitously in Arabidopsis. To identify the flowering pathway integrators that may be responsible for AtVDAC1′s function during the floral transition, an RNA-seq analysis was performed. In total, 106 differentially expressed genes (DEGs) were identified between wild-type and atvdac1-5 mutant seedlings. However, none were involved in flowering-related pathways. In contrast, AtVDAC1 physically associated with FLOWERING LOCUS T. Thus, in the floral transition, AtVDAC1 may function partly through the FLOWERING LOCUS T protein.

Description: The carbon dioxide (CO2) methanation reaction is a process that produces methane (CH4) by reacting CO2 and H2. Many studies have been conducted on this process because it enables a reduction of greenhouse gases and the production of energy with carbon neutrality. Moreover, it also exhibits a higher efficiency at low temperatures due to its thermodynamic characteristics; thus, there have been many studies, particularly on the catalysts that are driven at low temperatures and have high durability. However, with regards to employing this process in actual industrial processes, studies on both toxic substances that can influence catalyst performance and regeneration are still insufficient. Therefore, in this paper, the activity of a Ni catalyst before and after hydrogen sulfide (H2S) exposure was compared and an in-depth analysis was conducted to reveal the activity performance through the regeneration treatment of the poisoned catalyst. This study observed the reaction activity changes when injecting H2S during the CO2 + H2 reaction to evaluate the toxic effect of H2S on the Ni-Ce-Zr catalyst, in which the results indicate that the reaction activity decreases rapidly at 220 °C. Next, this study also successfully conducted a regeneration of the Ni-Ce-Zr catalyst that was poisoned with H2S by applying H2 heat treatment. It is expected that the results of this study can be used as fundamental data in an alternative approach to performance recovery when a small amount of H2S is included in the reaction gas of industrial processes (landfill gas, fire extinguishing tank gas, etc.) that can be linked to CO2 methanation.

Description: Background: Several immunotherapy (IT) agents are FDA approved for treatment of melanoma and non-small-cell lung cancer (NSCLC). The addition of stereotactic radiosurgery (SRS) or stereotactic body radiation therapy (SBRT) to immunotherapy looks promising. A systematic review was conducted to evaluate the possible synergistic effects of immune checkpoints inhibitors (ICIs) and stereotactic radiation therapy in melanoma and NSCLC. Materials and methods: Pubmed databases from January 2010 to December 2020 were reviewed to identify English language studies reporting control of local and abscopal effect of the combination of ICI-SBRT/SRS in metastatic NSCLC and melanoma cancer. The inclusion criteria were followed according to PICO criteria. Results: Thirty-nine articles were included of the 2141 initial results. The reported rates for local control were 16.5–100% and 40–94% in brain and extracerebral metastases, respectively. Distant/abscopal response rates were 1–45% in extracerebral metastases. Abscopal effect could not be evaluated in brain metastases because it was not reported in studies. Treatments were well tolerated with few grade 4 toxicities and no grade 5. Conclusions: The combined treatment of ICI-SBRT/SRS achieves high local control and non-negligible abscopal response in patients with extracerebral metastases, with its benefit in cerebral metastases being more controversial. Clinical trials are needed to better characterize the potential synergism.

Description: Chronic inflammation promotes endothelial plasticity, leading to the development of several diseases, including fibrosis and cancer in numerous organs. The basis of those processes is a phenomenon called the endothelial–mesenchymal transition (EndMT), which results in the delamination of tightly connected endothelial cells that acquire a mesenchymal phenotype. EndMT-derived cells, known as the myofibroblasts or cancer-associated fibroblasts (CAFs), are characterized by the loss of cell–cell junctions, loss of endothelial markers, and gain in mesenchymal ones. As a result, the endothelium ceases its primary ability to maintain patent and functional capillaries and induce new blood vessels. At the same time, it acquires the migration and invasion potential typical of mesenchymal cells. The observed modulation of cell shape, increasedcell movement, and invasion abilities are connected with cytoskeleton reorganization. This paper focuses on the review of current knowledge about the molecular pathways involved in the modulation of each cytoskeleton element (microfilaments, microtubule, and intermediate filaments) during EndMT and their role as the potential targets for cancer and fibrosis treatment.

Description: Antibody-drug conjugates (ADCs) are innovative biopharmaceutical products in which a monoclonal antibody is linked to a small molecule drug with a stable linker. Most of the ADCs developed so far are for treating cancer, but there is enormous potential for using ADCs to treat other diseases. Currently, ten ADCs have been approved by the United States Food and Drug Administration (FDA), and more than 90 ADCs are under worldwide clinical development. Monoclonal antibodies have evolved from research tools to powerful therapeutics in the past 30 years. Tremendous strides have been made in antibody discovery, protein bioengineering, formulation, and delivery devices. This manuscript provides an overview of the biology, chemistry, and biophysical properties of each component of ADC design. This review summarizes the advances and challenges in the field to date, with an emphasis on antibody conjugation, linker-payload chemistry, novel payload classes, drug-antibody ratio (DAR), and product development. The review emphasizes the lessons learned in the development of oncology antibody conjugates and look towards future innovations enabling other therapeutic indications. The review discusses resistance mechanisms to ADCs, and give an opinion on future perspectives.

Description: Feature Pyramid Network (FPN) is used as the neck of current popular object detection networks. Research has shown that the structure of FPN has some defects. In addition to the loss of information caused by the reduction of the channel number, the features scale of different levels are also different, and the corresponding information at different abstract levels are also different, resulting in a semantic gap between each level. We call the semantic gap level imbalance. Correlation convolution is a way to alleviate the imbalance between adjacent layers; however, how to alleviate imbalance between all levels is another problem. In this article, we propose a new simple but effective network structure called Scale-Equalizing Feature Pyramid Network (SEFPN), which generates multiple features of different scales by iteratively fusing the features of each level. SEFPN improves the overall performance of the network by balancing the semantic representation of each layer of features. The experimental results on the MS-COCO2017 dataset show that the integration of SEFPN as a standalone module into the one-stage network can further improve the performance of the detector, by ∼1AP, and improve the detection performance of Faster R-CNN, a typical two-stage network, especially for large object detection APL∼2AP.

Description: With a growing global population and energy demand, there is increasing concern about the world’s reliance on fossil fuels, which have a negative impact on the climate, necessitating the immediate transition to a cleaner energy resource. This effort can be initiated in the rural areas of developing countries for a sustainable, efficient and affordable energy source. This study evaluated four types of renewable energy (solar, wind, biomass, and mini-hydro energy) using the integrated Life Cycle Assessment (LCA) and Analytical Hierarchy Process (AHP) approaches to select the best renewable energy source in Tatau, Sarawak. The criteria under consideration in this study included the environment, engineering and economics. The LCA was used to assess the environmental impact of renewable energies from gate-to-grave boundaries based on 50 MJ/day of electricity generation. The AHP results showed that solar energy received the highest score of 0.299 in terms of the evaluated criteria, followed by mini-hydro, biomass and wind energy, which received scores of 0.271, 0.230 and 0.200, respectively. These findings can be used to develop a systematic procedure for determining the best form of renewable energy for rural areas. This approach could be vital for the authorities that are responsible for breaking down multi-perspective criteria for future decision making in the transition into renewable energy.

Description: The Boa constrictor is one of the most common reptiles bred in captivity. To achieve a successful breeding season, thorough knowledge of the females’ reproductive activity is necessary. In this regard, information on the Boa constrictor is still rather scarce. The aim of the present study was to monitor the ovarian activity and the embryonic development of boas by ultrasound. We performed brief scans on thirty non-anaesthetized snakes using a portable ultrasound system and a 7.5–10 MHz linear array transducer (Esaote MyLab™ Classic). Ultrasound features, dimensions, and echogenicity of the preovulatory and postovulatory follicles were determined. As gestation progresses, the postovulatory follicle size increases, and the embryonic silhouette becomes increasingly recognizable. During the second month after ovulation, by using color Doppler, early embryos’ heart activity could be evaluated. It is possible to highlight vascular connections between the mother and the membrane covering the embryonic structures. Ultrasound also allows one to identify follicular regression or slugs (nonfertilized eggs) early. The present study suggests that ultrasound could be an excellent noninvasive technique to evaluate the reproductive activity of Boa constrictor, allowing us to precisely identify the correct time for mating, monitor embryo development and viability, and allow the early diagnosis of follicular regression.

Description: In the past few decades, ZrN thin films have been identified as wear resistant coatings for tribological applications. The mechanical and tribological properties of ZrN thin layers depend on internal stress induced by the adopted deposition techniques and deposition parameters such as pressure, temperature, and growth rate. In sputtering deposition processes, the selected target voltage waveform and the plasma characteristics also play a crucial influence on physical properties of produced coatings. In present work, ZrN thin films, obtained setting different values of duty cycle in a reactive bipolar pulsed dual magnetron sputtering plant, were investigated to evaluate their residual stress through the substrate curvature method. A considerable progressive increase of residual stress values was measured at decreasing duty cycle, attesting the significant role of voltage waveform in stress development. An evident correlation was also highlighted between the values of the duty cycle and those of wear factor. The performed analysis attested an advantageous effect of internal stress, having the samples with high compressive stress, higher wear resistance. A downward trend for wear rate with the increase of internal residual stress was observed. The choice of suitable values of duty cycle allowed to produce ceramic coatings with improved tribological performance.

Description: Cholera remains a heavy burden worldwide, especially in Sub-Saharan African countries, which account for the majority of the reported cases on the continent. In this study, a 27-year retrospective analysis of cholera epidemics in Guinea-Bissau was performed in order to highlight major stressors fueling the trigger and dissemination of the disease. Although the role of environmental factors did not always have the same degree of importance for the onset of epidemics, a cholera seasonal pattern was clearly perceived, with most of the reported cases occurring during the wet season. The generated theoretical hypothesis indicated rainfall above climatological average, associated with a lack of WASH (water, sanitation and hygiene) infrastructure, and the occurrence of concomitant epidemics in neighboring countries as the key indicators for optimal conditions for cholera to thrive in Guinea-Bissau. Warmer air temperature, the increase in sea surface temperature, and the decrease in salinity in the coastal areas may also contribute to the emergence and/or aggravation of cholera events. Prediction of the conditions favorable for cholera growth and identification of risk pathways will allow the timely allocation of resources, and support the development of alert tools and mitigation strategies.

Description: Voltage-dependent anion channels (VDACs) are highly conserved proteins that are involved in the translocation of tRNA and play a key role in modulating plant senescence and multiple pathways. However, the functions of VDACs in plants are still poorly understood. Here, a novel VDAC gene was isolated and identified from alfalfa (Medicago sativa L.). MsVDAC localized to the mitochondria, and its expression was highest in alfalfa roots and was induced in response to cold, drought and salt treatment. Overexpression of MsVDAC in tobacco significantly increased MDA, GSH, soluble sugars, soluble protein and proline contents under cold and drought stress. However, the activities of SOD and POD decreased in transgenic tobacco under cold stress, while the O2- content increased. Stress-responsive genes including LTP1, ERD10B and Hxk3 were upregulated in the transgenic plants under cold and drought stress. However, GAPC, CBL1, BI-1, Cu/ZnSOD and MnSOD were upregulated only in the transgenic tobacco plants under cold stress, and GAPC, CBL1, and BI-1 were downregulated under drought stress. These results suggest that MsVDAC provides cold tolerance by regulating ROS scavenging, osmotic homeostasis and stress-responsive gene expression in plants, but the improved drought tolerance via MsVDAC may be mainly due to osmotic homeostasis and stress-responsive genes.

Description: Plicosepalus acacia (Fam. Loranthaceae) has been reported to possess hypoglycemic, antioxidant, antimicrobial, and anti-inflammatory effects. Liquid chromatography combined with tandem mass spectrometry (LC-MS/MS) analysis revealed the presence of a high content of polyphenolic compounds that are attributed to the therapeutic effects of the crude extract. In addition, methyl gallate and quercetin were detected as major phytomedicinal agents at concentrations of 1.7% and 0.062 g%, respectively, using high-performance thin layer chromatography (HPTLC). The present study investigated the effect of the P. acacia extract and its isolated compounds, methyl gallate and quercetin, on hind limb ischemia induced in type 1 diabetic rats. Histopathological examination revealed that treatment with P. acacia extract, methyl gallate, and quercetin decreased degenerative changes and inflammation in the ischemic muscle. Further biochemical assessment of the hind limb tissue showed decreased oxidative stress, increased levels of nitric oxide and endothelial nitric oxide synthase (eNOS), and enhancement of the levels of heme oxygenase-1 (HO-1) and vascular endothelial growth factor (VEGF) in the groups treated with methyl gallate and quercetin. Expression levels of hypoxia inducible factor-1 alpha (HIF-1α), VEGF, fibroblast growth factor-2 (FGF-2), and miR-146a were upregulated in the muscle tissue of methyl gallate- and quercetin-treated groups along with downregulation of nuclear factor kappa B (NF-κB). In conclusion, P. acacia extract and its isolated compounds, methyl gallate and quercetin, mediated therapeutic angiogenesis in diabetic hind limb ischemia.

Description: The manipulation of light intensity by shade nets can lead to exchanges in the phytochemical quality and antioxidants ofsome herbs. This study aimed to determine whether shading by pearl nets (50% shade index) could improve the bioactive compounds in several medicinal herbs such as thyme (Thymus vulgaris L.), marjoram (Origanum majorana L.), oregano (Origanum vulgare L.), lemon balm (Melissa officinalis L.), and peppermint (Mentha piperita L.), and their correspondingherbal extracts during a four-week maceration process in ethanol. Oregano and thyme provided the highest yield of total extractive substances (TES) from both shaded and non-shaded plants. Among all studied herbs, the highest level of antioxidants, expressed as total phenolic content (TPC) was found in extracts from shaded plants of lemon balm. Herbal extracts produced from non-shaded thyme and marjoram had higher flavonoid contents compared to herbal extracts from shaded plants. Accumulation of the investigated secondary metabolites depends more on the specificity of a plant species rather than light intensity. This study was an initial step in the production of medicinal plants with an increased quantity of antioxidant and other bioactive compounds during the maceration process in extracts, aimed to be used as natural alcoholic productwith added value.

Description: A novel, environmentally friendly, fast, and flexible polishing process for Nitinol parts is presented in this study. Nitinol samples with both superelastic and shape memory properties at room temperature were investigated. The chemical contamination and surface roughness of superelastic Nitinol plates were examined before and after plasma electrolytic polishing. The shift in phase transformation temperature and tensile strength before and after the polishing process were analysed using Nitinol wire with shape memory properties. The obtained experimental results were compared to the data obtained on reference samples examined in the as-received condition. It was found that plasma electrolytic polishing, when the right process parameters are applied, is capable of delivering Nitinol parts with extremely high surface quality. Moreover, it was experimentally proven that plasma electrolytic polishing does not have a negative impact on functionality or mechanical properties of polished parts.

Description: The Poisson–Boltzmann equation (PBE) arises in various disciplines including biophysics, electrochemistry, and colloid chemistry, leading to the need for efficient and accurate simulations of PBE. However, most of the finite difference/element methods developed so far are rather complicated to implement. In this study, we develop a ResNet-based artificial neural network (ANN) to predict solutions of PBE. Our networks are robust with respect to the locations of charges and shapes of solvent–solute interfaces. To generate train and test sets, we have solved PBE using immersed finite element method (IFEM) proposed in (Kwon, I.; Kwak, D. Y. Discontinuous bubble immersed finite element method for Poisson–Boltzmann equation. Communications in Computational Physics 2019, 25, pp. 928–946). Once the proposed ANNs are trained, one can predict solutions of PBE in almost real time by a simple substitution of information of charges/interfaces into the networks. Thus, our algorithms can be used effectively in various biomolecular simulations including ion-channeling simulations and calculations of diffusion-controlled enzyme reaction rate. The performance of the ANN is reported in the result section. The comparison between IFEM-generated solutions and network-generated solutions shows that root mean squared error are below 5·10−7. Additionally, blow-ups of electrostatic potentials near the singular charge region and abrupt decreases near the interfaces are represented in a reasonable way.

Description: This study aimed to determine the prevalence of high levels of knowledge, positive attitude, and good practice on evidence-based medicine (EBM) and identify the associated factors for practice score on EBM among emergency medicine doctors in Kelantan, Malaysia. This cross-sectional study was conducted in government hospitals in Kelantan. The data were collected from 200 emergency physicians and medical officers in the emergency department using the Noor Evidence-Based Medicine Questionnaire. Simple and general linear regressions analyses using SPSS were performed. A total of 183 responded, making a response rate of 91.5%. Of them, 49.7% had a high level of knowledge, 39.9% had a positive attitude and 2.1% had good practice. Sex, race, the average number of patients seen per day, internet access in workplace, having online quick reference application, and attitude towards EBM were significantly associated with EBM practice scores. It is recommended that appropriate authorities provide emergency doctors with broader access to evidence resources. EBM skill training should be enhanced in the current medical school curriculums.

Description: Gene mutations in PIK3CA, PIK3R1, KRAS, PTEN, and PPP2R1A commonly detected in type I endometrial cancer lead to PI3K/Akt/mTOR pathway activation. Bimiralisib (PQR309), an orally bioavailable selective dual inhibitor of PI3K and mTOR, has been studied in preclinical models and clinical trials. The aim of this study is to evaluate the anticancer effect of PQR309 on endometrial cancer cells. PQR309 decreased cell viability in two-dimensional and three-dimensional cell culture models. PQR309 induced G1 cell cycle arrest and little cell death in endometrial cancer cell lines. It decreased CDK6 expression and increased p27 expression. Using the Proteome Profiler Human XL Oncology Array and Western blot assay, the dual inhibitor could inhibit the expressions of c-Myc and mtp53. KJ-Pyr-9, a c-Myc inhibitor, was used to prove the role of c-Myc in endometrial cancer survival and regulating the expression of mtp53. Knockdown of mtp53 lowered cell proliferation, Akt/mTOR pathway activity, and the expressions of c-Myc. mtp53 silence enhanced PQR309-inhibited cell viability, spheroid formation, and the expressions of p-Akt, c-Myc, and CDK6. This is the first study to reveal the novel finding of the PI3K/mTOR dual inhibitor in lowering cell viability by abolishing the PI3K/Akt/mTOR/c-Myc/mtp53 positive feedback loop in endometrial cancer cell lines.

Description: Photocatalysis is proven to be the most efficient and environmentally friendly method for the degradation of organic pollutants in water purification. To meet the requirement of large-scale water treatment, there are two important points: One is the lifetime and chemical stability of the photocatalyst material, especially in the complex and harsh aqueous conditions. The other is the ease of synthesis of such photocatalysts with specific nano-morphology. In this work, two common photocatalyst materials, zinc oxide (ZnO) and titanium dioxide (TiO2), are selected to form more sustainable photocatalysts with high chemical stability. This involves the combination of both TiO2 and ZnO in a two-step simple synthesis method. It appears advantageous to exploit the conformal deposition of atomic layer deposition (ALD) to achieve nanometer-thick TiO2 coating on ZnO nanowires (NWs) with a high aspect ratio, which are firmly anchored to a substrate and exhibit a large specific surface area. The high chemical stability of the ALD TiO2 coating has been investigated in detail and proven to be effective under both strong acid and strong alkaline aqueous solutions. In addition, photocatalysis experiments with organic dyes show that via this simple two-step synthesis method, the produced ZnO/TiO2 tandem photocatalysts does indeed exhibit improved chemical stability in a harsh environment, while allowing efficient photodegradation.

Description: Education for Sustainable Development (ESD) and Entrepreneurial Education (EE) are quite abstract and demanding concepts for teacher students. Yet, Key Sustainability Competences and Entrepreneurial Competences entail important qualities of future citizens and workers, and teacher students should become prepared to accommodate education for these competencies in their teaching practice. This paper explores teacher students’ process of sense-making of sustainable development and how becoming a teacher who practices ESD connects with entrepreneurship. EE serves as a good mirroring surface to ESD as they both have their roots in Transformative Learning (TL) but pursue transformation towards different goals. The case study follows the vocational teacher education (VTE) students’ sensemaking of Sustainable Development as a part of teacher’s work during one semester which included integrated Thematic Studies of Sustainable Development. The qualitative content analysis of students’ texts focused on signs of transformative learning and was guided by the dimensions of sustainable development and learning goals set for teacher’s sustainability competences in the VTE curriculum. The results indicate that transformative learning is possible. Furthermore, they address the importance of certain entrepreneurial capabilities in the actualization of change agency.

Description: Floods are a known natural hazard in Germany, but the amount of precipitation and ensuing high death toll and damages after the events especially from 14 to 15 July 2021 came as a surprise. Almost immediately questions about failure in the early warning chains and the effectiveness of the German response emerged, also internationally. This article presents lessons to learn and argues against a blame culture. The findings are based on comparisons with findings from previous research projects carried out in the Rhein-Erft Kreis and the city of Cologne, as well as on discussions with operational relief forces after the 2021 events. The main disaster aspects of the 2021 flood are related to issuing and understanding warnings, a lack of information and data exchange, unfolding upon a situation of an ongoing pandemic and aggravated further by critical infrastructure failure. Increasing frequencies of flash floods and other extremes due to climate change are just one side of the transformation and challenge, Germany and neighbouring countries are facing. The vulnerability paradox also heavily contributes to it; German society became increasingly vulnerable to failure due to an increased dependency on its infrastructure and emergency system, and the ensuing expectations of the public for a perfect system.

Description: Over the last few decades, advanced manufacturing and additive printing technologies have made incredible inroads into the fields of engineering, transportation, and healthcare. Among additive manufacturing technologies, 3D printing is gradually emerging as a powerful technique owing to a combination of attractive features, such as fast prototyping, fabrication of complex designs/structures, minimization of waste generation, and easy mass customization. Of late, 4D printing has also been initiated, which is the sophisticated version of the 3D printing. It has an extra advantageous feature: retaining shape memory and being able to provide instructions to the printed parts on how to move or adapt under some environmental conditions, such as, water, wind, light, temperature, or other environmental stimuli. This advanced printing utilizes the response of smart manufactured materials, which offer the capability of changing shapes postproduction over application of any forms of energy. The potential application of 4D printing in the biomedical field is huge. Here, the technology could be applied to tissue engineering, medicine, and configuration of smart biomedical devices. Various characteristics of next generation additive printings, namely 3D and 4D printings, and their use in enhancing the manufacturing domain, their development, and some of the applications have been discussed. Special materials with piezoelectric properties and shape-changing characteristics have also been discussed in comparison with conventional material options for additive printing.

Description: Silicon nanoparticles are used to enhance the anode specific capacity for the lithium-ion cell technology. Due to the mechanical deficiencies of silicon during lithiation and delithiation, one of the many strategies that have been proposed consists of enwrapping the silicon nanoparticles with graphene and creating a void area between them so as to accommodate the large volume changes that occur in the silicon nanoparticle. This work aims to investigate the electrochemical performance and the associated kinetics of the hollow outer shell nanoparticles. To this end, we prepared hollow outer shell silicon nanoparticles (nps) enwrapped with graphene by using thermally grown silicon dioxide as a sacrificial layer, ball milling to enwrap silicon particles with graphene and hydro fluorine (HF) to etch the sacrificial SiO2 layer. In addition, in order to offer a wider vision on the electrochemical behavior of the hollow outer shell Si nps, we also prepared all the possible in-between process stages of nps and corresponding electrodes (i.e., bare Si nps, bare Si nps enwrapped with graphene, Si/SiO2 nps and Si/SiO2 nps enwrapped with graphene). The morphology of all particles revealed the existence of graphene encapsulation, void, and a residual layer of silicon dioxide depending on the process of each nanoparticle. Corresponding electrodes were prepared and studied in half cell configurations by means of galvanostatic cycling, cyclic voltammetry and electrochemical impedance spectroscopy. It was observed that nanoparticles encapsulated with graphene demonstrated high specific capacity but limited cycle life. In contrast, nanoparticles with void and/or SiO2 were able to deliver improved cycle life. It is suggested that the existence of the void and/or residual SiO2 layer limits the formation of rich LiXSi alloys in the core silicon nanoparticle, providing higher mechanical stability during the lithiation and delithiation processes.

Description: Tea (Camellia sinensis) and herbal tea have been recognized as rich sources of bioactive constituents with the ability to exert antioxidant actions. The aims of this study were to analyze phenolic, carotenoid and saccharide contents in a set of Vietnamese tea and herbal tea and compare the results with those of green and black teas marketed in the U.S. In total, 27 phenolics, six carotenoids and chlorophylls, and three saccharides were quantitatively identified. Catechins, quercetin glycosides and chlorogenic acid were the predominating phenolics in the teas, with the concentrations following the order: jasmine/green teas 〉 oolong tea 〉 black tea. Lutein was the dominant carotenoid in the teas and its concentrations were generally found to be higher in the jasmine and green teas than in the oolong and black teas. The study showed that the green teas originating in Vietnam had much higher levels of phenolics and carotenoids than their counterparts stemming from another country. The application of partial least squares discriminant analysis (PLS-DA) as a chemometric tool was able to differentiate phenolic profiles between methanolic extracts and tea infusions. Through principal component analysis (PCA), the similarities and dissimilarities among the jasmine, green, oolong, black teas and herbal teas were depicted.

Description: Metabolic and hormonal outcomes of polycystic ovary syndrome (PCOS) have implications on telomere biology and physical activity may prevent telomere erosion. We sought to observe the effects of continuous (CAT) and intermittent (IAT) aerobic training on telomere length, inflammatory biomarkers, and its correlation with metabolic, hormonal, and anthropometric parameters of PCOS. This randomized controlled clinical trial study included 87 PCOS randomly stratified according to body mass index (BMI) in CAT (n = 28), IAT (n = 29) and non-training control group (CG, n = 30). The exercises were carried out on a treadmill, three times per week for 16 weeks. The participants’ anthropometric characteristics and biochemical and hormonal concentrations were measured before and after aerobic training or observation period, as the telomere length that was evaluated using quantitative real-time PCR. Four months of aerobic exercises (CAT or IAT) did not alter telomere length and inflammatory biomarkers in PCOS women. Obesity index as BMI and waist circumference (WC), and inflammatory biomarkers negatively affect telomeres. The hyper-andro-genism measured by testosterone levels was reduced after both exercises (CAT, p ≤ 0.001; IAT, p = 0.019). In particular, the CAT reduced WC (p = 0.045), hip circumference (p = 0.032), serum cholesterol (p ≤ 0.001), and low-density lipoprotein (p = 0.030). Whereas, the IAT decreased WC (p = 0.014), waist-to-hip ratio (p = 0.012), free androgen index (FAI) (p = 0.037). WC (p = 0.049) and body fat (p = 0.015) increased in the non-training group while total cholesterol was reduced (p = 0.010). Booth exercises reduced obesity indices and hyperandrogenism on PCOS women without changes in telomere length or inflammatory biomarkers.

Description: This article aims to assess how fiscal and financial incentives and government support conditioned the profitability of Portuguese SMEs between 2010 and 2019. The high tax and financial burdens on SMEs have consequences for sustainability and business development. Thus, the study analyzes different incentives provided by the Portuguese government to ease this burden and improve business profitability. The study uses panel data with fixed effects using five different sources of information from five internal tax grant types, three different European Union program financial subventions, and three national budget-specific expenses. The results obtained suggest that tax incentives influence the profitability of SMEs; however, government incentives do not have any impact. The QREN (financial) incentives positively decide the ROA and negatively impact the ROE, contributing to sustainable performance. Portugal 2020 incentives have a weak effect on the first years, improving in the following years. However, the incentive related to R&D is not relevant. This work aims to contribute to decision making for managers, shareholders, and government entities, allowing them to choose those measures that could increase the company’s added value, and for governments, as a tool to select incentives that will most benefit SMEs’’ profitability. This work identifies the key incentives that impact companies’ profitability.

Description: Carbon neutrality has positive impacts on people, nature and the economy, and buildings represent the “last mile” sector in the transition to carbon neutrality. Carbon neutrality is characterized by the decarbonization of operations and maintenance, in addition to zero emissions in electricity and other industry sectors. Taking China’s commercial buildings as an example, this study is the first to perform an extensive data analysis for a step-wise carbon neutral roadmap of building operations via the analysis of a dynamic emission scenario. The results reveal that the carbon emissions abatement of commercial building operations from 2001 to 2018 was 1460.85 (±574.61) mega-tons of carbon dioxide (Mt CO2). The carbon emissions of commercial building operations will peak in the year 2039 (±5) at 1364.31 (±258.70) Mt, with emission factors and energy intensity being the main factors influencing the carbon peak. To move toward carbon neutral status, an additional 169.73 Mt CO2 needs to be cut by 2060, and the low emission path toward carbon neutrality will lead to the realization of the carbon peak of commercial buildings in 2024, with total emissions of 921.71 Mt. It is believed that cutting emissions from the operation of buildings in China will require a multi-sectoral synergistic strategy. It is suggested that government, residents, enterprises, and other stakeholders must better appreciate the challenges to achieve a substantial carbon reduction and the need for urgent action in the building sector in order to achieve carbon neutrality.

Description: Dynamic behavior modeling and parameter optimization of the spray boom based on multi-body vibration were developed to study the influence of the boom sprayer’s motion in a complex working environment on the dynamic behavior of the spray boom. First, a geometric continuous model of spray boom vibration was established considering the influence of the boom sprayer body and boom suspension. Then, the dynamic behavior of the spray boom under step excitation was studied on a SWAN3WP-500 self-propelled boom spray experimental platform. The time-domain response of spray boom movement was characterized using a multi-channel dynamic test system, and the simulation results of the geometric continuous model were verified. The correlation coefficient between the simulated and experimental results is 0.917, and the maximum relative error is 12.16%. Finally, the effects of boom sprayer speed, spray boom length, and spray boom cross-section shape on spray boom vibration were analyzed through the geometric continuous model. (1) The amplitude and period of vibration at the extremity of the spray boom gradually decline with a rise in boom sprayer speed. (2) The amplitude and period of vibration at the extremity of the spray boom gradually increase when the unilateral spray boom is shorter than 5 m but slowly decrease when it is longer than 5 m. To avoid excessive static elastic deformation of the spray boom, the length of the unilateral spray boom should be controlled within 6 m. (3) A reasonable cross-sectional shape can improve the spray boom vibration, and the spray boom with a type B cross-section can better inhibit the vertical vibration of the spray boom under the same cross-sectional area.

Description: Cancer is one of the leading causes of death globally, associated with multifactorial pathophysiological components. In particular, genetic mutations, infection or inflammation, unhealthy eating habits, exposition to radiation, work stress, and/or intake of toxins have been found to contribute to the development and progression of cancer disease states. Early detection of cancer and proper treatment have been found to enhance the chances of survival and healing, but the side effects of anticancer drugs still produce detrimental responses that counteract the benefits of treatment in terms of hospitalization and survival. Recently, several natural bioactive compounds were found to possess anticancer properties, capable of killing transformed or cancerous cells without being toxic to their normal counterparts. This effect occurs when natural products are associated with conventional treatments, thereby suggesting that nutraceutical supplementation may contribute to successful anticancer therapy. This review aims to discuss the current literature on four natural bioactive extracts mostly characterized by a specific polyphenolic profile. In particular, several activities have been reported to contribute to nutraceutical support in anticancer treatment: (1) inhibition of cell proliferation, (2) antioxidant activity, and (3) anti-inflammatory activity. On the other hand, owing to their attenuation of the toxic effect of current anticancer therapies, natural antioxidants may contribute to improving the compliance of patients undergoing anticancer treatment. Thus, nutraceutical supplementation, along with current anticancer drug treatment, may be considered for better responses and compliance in patients with cancer. It should be noted, however, that when data from studies with bioactive plant preparations are discussed, it is appropriate to ensure that experiments have been conducted in accordance with accepted pharmacological research practices so as not to disclose information that is only partially correct.

Description: In the past few decades, biosensors have been gradually developed for the rapid detection and monitoring of human diseases. Recently, functional nucleic-acid (FNA) biosensors have attracted the attention of scholars due to a series of advantages such as high stability and strong specificity, as well as the significant progress they have made in terms of biomedical applications. However, there are few reports that systematically and comprehensively summarize its working principles, classification and application. In this review, we primarily introduce functional modes of biosensors that combine functional nucleic acids with different signal output modes. In addition, the mechanisms of action of several media of the FNA biosensor are introduced. Finally, the practical application and existing problems of FNA sensors are discussed, and the future development directions and application prospects of functional nucleic acid sensors are prospected.

Description: The loss of forests is a major environmental, social, and economic problem. The disappearance has been occurring to an extreme degree in many parts of Southeast Asia, including Thailand. Logging and clearing of forests for agriculture, cash crops, and food production has destroyed much of the tropical forests in Thailand. Floristic inventory could provide essential information for forest conservation but species identification as a part of inventory creating could be challenging in some cases. Barcode DNA coupled with High Resolution Melting analysis (Bar-HRM) was used here in aiding species identification of plant in Dipterocarpaceae (Dipterocarpus alatus, D. costatu, D. intricatus, D. obtusifolius, Hopea ferrea, H. odorata, Shorea guiso, S. obtuse, S. roxburghii, and S. siamensis) and Fagaceae (Castanopsis echinocarpa, C. inermis, Lithocarpus wallichianus, Quercus aliena and Q. oidocarpa) families. Two main experiments were conducted including: (1) a comparing method for primer design and (2) testing the robustness of the Bar-HRM by trying to identify tree samples that did not have sequences in the GenBank. In experiment 1, the manual design primer pair was found to be the best fit for the work. Of key importance is finding the primers which give the most nucleotide variations within the generated amplicon; this is a parameter that cannot be set in any web-based tools. Next, in experiment 2, Bar-HRM using primers of ITS1 and ITS2 regions were able to discriminate all 10 tested tree species without any problem, even when there were no sequences of the samples to be analysed before performing the HRM. Here, Bar-HRM poses potential to be a game-changer in tropical forest conservation, as it will be useful for species identification.

Description: Disordered eating, or abnormal eating behaviours that do not meet the criteria for an independent eating disorder, have been reported among people with schizophrenia. We aimed to systemati-cally review literature on disordered eating among people with schizophrenia spectrum disorder (SSD). Seven databases were systematically searched for studies that described the prevalence and correlates of disordered eating among patients with SSD from January 1984 to 15 February 2021. Qualitative analysis was performed using the National Institutes of Health scales. Of 5504 records identified, 31 studies involving 471,159 subjects were included in the systematic review. The ma-jority of studies (17) rated fair on qualitative analysis and included more men, and participants in their 30s and 40s, on antipsychotics. The commonest limitations include lack of sample size or power calculations, poor sample description, not using valid tools, or not adjusting for con-founders. The reported rates were 4.4% to 45% for binge eating, 16.1% to 64%, for food craving, 27% to 60.6% for food addiction, and 4% to 30% for night eating. Positive associations were re-ported for binge eating with antipsychotic use and female gender, between food craving and weight gain, between food addiction and increased dietary intake, and between disordered eating and female gender, mood and psychotic symptoms. Reported rates for disordered eating among people with SSD are higher than those in the general population. We will discuss the clinical, treatment and research implications of our findings.

Description: The cross-flow rotating packed bed (RPB) has attracted wide attention in recent years because of its advantages of large gas capacity, low pressure drop and lack of flooding limitation. However, the complex structure of the packing makes it difficult to obtain the gas flow characteristics in the cross-flow RPB by experiments. In this study, the dry pressure drop in the cross-flow RPB was investigated by computational fluid dynamics (CFD). The packing was modeled by the porous media model and the rotation of the packing was simulated by the sliding mesh model. The simulation results obtained by three turbulence models were compared with experimental results, and the RNG k-ε model was found to best describe the turbulence behaviors in the cross-flow RPB. Then, the effects of gas flow rate and rotating speed on dry pressure drop in different parts of the cross-flow RPB were analyzed. The results of this study can provide important insights into the design and scale-up of cross-flow RPB.

Description: In this article, sample damage and wear of forced-in joints is presented, and their reliability evaluated. Compared were shafts without additional finish treatment, rolled shafts and those with a TiSiN coating. Tribological samples under investigation operated in rotational bending conditions. Recorded was the number of fatigue cycles at which damage might occur. Reliability indicators were plotted, which demonstrated that coated shafts are distinguished by the highest reliability and low damage intensity. Macroscopic observations of shaft surfaces demonstrated the traces of adhesive wear and, in the case of shafts without additional treatment and in the case of rolled shafts, fretting wear traces in the form of a ring comprising the entire shaft circumference. Microscopic observations showed numerous build-ups on the surface, microcracks, and the occurrence of wear products in the gap between the shaft and sleeve. The highest fatigue strength was demonstrated by shafts with a TiSiN coating. The shaft section change area was the place where fatigue wear occurred.

Description: Cooperative driving is an essential component of intelligent transport systems (ITSs). It promises greater safety, reduced accidents, efficient traffic flow, and fuel consumption reduction. Vehicle platooning is a representative service model for ITS. The principal sub-systems of platooning systems for connected and automated vehicles (CAVs) are cooperative adaptive cruise control (CACC) systems and platoon management systems. Based on vehicle state information received through vehicle-to-vehicle (V2V) communication, the CACC system allows platoon vehicles to maintain a narrower safety distance. In addition, the platoon management system using V2V communications allows vehicles to perform platoon maneuvers reliably and accurately. In this paper, we propose a CACC system with a variable time headway and a decentralized platoon join-in-middle maneuver protocol with a trajectory planning system considering the V2V communication delay for CAVs. The platoon join-in-middle maneuver is a challenging research subject as the research must consider the requirement of a more precise management protocol and lateral control for platoon safety and string stability. These CACC systems and protocols are implemented on a simulator for a connected and automated vehicle system, PreScan, and we validated our approach using a realistic control system and V2V communication system provided by PreScan.

Description: Over the past decades, a large amount of data has been accumulated in various subfields of glycobiology. However, much clinically relevant data and many tools are still not widely used in medicine. Synthetic glycoconjugates with the known structure of glycans are an accurate tool for the study of glycan-binding proteins. We used polyacrylamide glycoconjugates (PGs) including PGs with tumour-associated glycans (TAGs) in immunoassays to assess the prognostic potential of the serum level of anti-glycan antibodies (AG Abs) in gastrointestinal cancer patients and found an association of AG Abs with survival. The specificity of affinity-isolated AG Abs was investigated using synthetic and natural glycoconjugates. AG Abs showed mainly a low specificity to tumour-associated and tumour-derived mucins; therefore, the protective role of the examined circulating AG Abs against cancer remains a challenge. In this review, our findings are analysed and discussed in the context of the contribution of bacteria to the AG Abs stimulus and cancer progression. Examples of the influence of pathogenic bacteria colonising tumours on cancer progression and patient survival through mechanisms of interaction with tumours and dysregulated immune response are considered. The possibilities and problems of the integrative study of AG Abs and the microbiome using high-performance technologies are discussed.

Description: Lithium-ion capacitors (LICs) have gained significant attention due to the combination on the advantages of electric double-layer capacitors (EDLCs) and lithium-ion batteries (LIBs). Herein, the LIC pouch cell was fabricated by an activated carbon (AC) cathode and a Li4Ti5O12 (LTO) anode. Two organic electrolytes (1 mol L−1 LiBF4/acetonitrile (AN) and 1 mol L−1 LiPF6/ ethylene carbonate (EC) + ethyl methyl carbonate (EMC) + dimethyl carbonate (DMC)) were chosen and the gas swelling behavior was studied. Compared with the ester-based LIC, the AN-based LIC displays higher energy density of 13.31 Wh kg−1 at 11.4 W kg−1 and even provides a value of 9.1 Wh kg−1 at 1075 W kg−1. Because of the lower DC Resistance of 0.761 mΩ, the maximum power density of the AN-based LIC reaches 12.5 kW kg−1. The AN-based LIC delivers good stability with an energy retention of 88.3% after 900 cycles. It is discovered that the swelling behavior of AN-based LICs is more serious and the major component is H2. The difference of swelling behavior among the LICs, lithium nickel cobalt manganese oxide (NCM)/LTO LIB and AC/AC EDLC is proposed to be caused by the AC electrode and the interfacial reaction of LTO.

Description: Practical village planning is not only an important guide for implementing the rural revitalization strategy but also an important support for building a sustainable rural development model. The scientific measurement of rural development potential to effectively identify the future development direction and mode of rural areas is of great significance to realize the implementation of “hierarchical and key points” of village planning. Taking 38 villages in Shapingba District of Chongqing as the study area, this study comprehensively measures the rural development potential from four dimensions: location advantage, resource endowment, economic vitality, and development constraint. Results reveal the following: (1) the spatial distribution pattern of rural development potential in the study area is centered on the central and southern urban development area, gradually decreasing toward the peripheral area. The village development potential tends to be balanced overall, but differences are observed in advantage and development obstacles of villages in the district, and the four sub-dimensions show a large spatial heterogeneity;(2) the 38 administrative villages were divided into four types, namely, core planning area, important planning area, general planning area, and basic control area. Their percentages were 13.16%, 52.63%, 23.68%, and 10.53%, respectively; (3) differentiated planning contents and strategies for different types of areas are adopted to prepare well-detailed and clearly focused village plans to promote sustainable rural development.

Description: Two known Polybrominated Diphenyl Ethers (PBDEs), 3,4,5-tribromo-2-(2′,4′-dibromophenoxy)phenol (1d) and 3,4,5,6-tetrabromo-2-(2′,4′-dibromophenoxy)phenol (2b), were isolated from the Indonesian marine sponge Lamellodysidea herbacea. The structure was confirmed using 13C chemical shift average deviation and was compared to the predicted structures and recorded chemical shifts in previous studies. We found a wide range of bioactivities from the organic crude extract, such as (1) a strong deterrence against the generalist pufferfish Canthigaster solandri, (2) potent inhibition against environmental and human pathogenic bacterial and fungal strains, and (3) the inhibition of the Hepatitis C Virus (HCV). The addition of a bromine atom into the A-ring of compound 2b resulted in higher fish feeding deterrence compared to compound 1d. On the contrary, compound 2b showed only more potent inhibition against the Gram-negative bacteria Rhodotorula glutinis (MIC 2.1 μg/mL), while compound 1d showed more powerful inhibition against the other human pathogenic bacteria and fungi. The first report of a chemical defense by compounds 1d and 2b against fish feeding and environmental relevant bacteria, especially pathogenic bacteria, might be one reason for the widespread occurrence of the shallow water sponge Lamellodysidea herbacea in Indonesia and the Indo-Pacific.

Description: d-galacturonic acid (d-GalUA) is the main constituent of pectin, a complex polysaccharide abundant in several agro-industrial by-products such as sugar beet pulp or citrus peel. During several attempts to valorise d-GalUA by engineering the popular cell factory Saccharomyces cerevisiae, it became obvious that d-GalUA is, to a certain degree, converted to l-galactonate (l-GalA) by an endogenous enzymatic activity. The goal of the current work was to clarify the identity of the responsible enzyme(s). A protein homology search identified three NADPH-dependent unspecific aldo-keto reductases in baker’s yeast (encoded by GCY1, YPR1 and GRE3) that show sequence similarities to known d-GalUA reductases from filamentous fungi. Characterization of the respective deletion mutants and an in vitro enzyme assay with a Gcy1 overproducing strain verified that Gcy1 is mainly responsible for the detectable reduction of d-GalUA to l-GalA.

Description: Despite the existence of a vast scientific literature on the subject of hydraulic energy recovery from water pipelines by means of micro- and pico-hydropower using pumps as turbines (PAT), such technology has found a very limited application thus far in practice. In fact, the selection of a pump as turbine for a specific site is a matter of nontrivial trade-offs between a variety of technical and economic parameters and this aspect has not been sufficiently captured and integrated into a reliable, proven, and practical selection methodology available to designers and practitioners. Hence, a multi-objective PAT selection software was developed and utilized to design a 3 kW energy recovery installation at a rural Irish water network. The performance of the scheme was monitored over 13 consecutive months, resulting in the generation of nearly 16,000 kWh of electricity and validating the output from the PAT selection software.

Description: We present results of Large-eddy simulations (LES) modeling of steady sheet and unsteady cloud cavitation on a two-dimensional hydrofoil which are validated against Particle image velocimetry (PIV) data. The study is performed for the angle of attack of 9° and high Reynolds numbers ReC of the order of 106 providing a strong adverse pressure gradient along the surface. We employ the Schnerr–Sauer and Kunz cavitation models together with the adaptive mesh refinement in critical flow regions where intensive phase transitions occur. Comparison of the LES and visualization results confirms that the flow dynamics is adequately reproduced in the calculations. To correctly match averaged velocity distributions, we propose a new methodology based on conditional averaging of instantaneous velocity fields measured by PIV which only provides information on the liquid phase. This approach leads to an excellent overall agreement between the conditionally averaged fields of the mean velocity and turbulence intensity obtained experimentally and numerically. The benefits of second-order discretization schemes are highlighted as opposed to the lower-order TVD scheme.

Description: Breakfast is considered an important meal, especially for people who are about to commence a long or demanding workday, and for roles that may involve physical tasks and a requirement to remain alert and vigilant in potentially high-risk situations. This study looks at breakfast consumption influences within two workplace institutional settings, namely military and mining. Semi-structured interviews were conducted with military personnel (n = 12) and mining employees (n = 12) to understand their breakfast consumption behaviour at work and at home, and the associated behavioural influences. The interview questions were framed by social cognitive theory. Overall, cognitive and environmental influences were the most prominent influences on breakfast consumption, less evident were behavioural influences. A negative stereotype of workplace institutional food services emerged as one of the most significant barriers to breakfast consumption for those already at work. Considerations of environmental influences on behaviour may need to be broadened beyond physical barriers and social influences, to include perceptions of the behavioural environment. Programs that aim to increase breakfast consumption must create areas where their employees want to go. Food systems need to ensure nutritious, quality, and appealing food is available. Interventions need to increase participants’ knowledge, improve their attitudes, and create positive expectations for breakfast.

Description: Activation of the tumor-associated stroma to support tumor growth is a common feature observed in different cancer entities. This principle is exemplified by cancer-associated fibroblasts (CAFs), which are educated by the tumor to shape its development across all stages. CAFs can alter the extracellular matrix (ECM) and secrete a variety of different molecules. In that manner they have the capability to affect activation, survival, proliferation, and migration of other stromal cells and cancer cell themselves. Alteration of the ECM, desmoplasia, is a common feature of breast cancer, indicating a prominent role for CAFs in shaping tumor development in the mammary gland. In this review, we summarize the multiple roles CAFs play in mammary carcinoma. We discuss experimental and clinical strategies to interfere with CAFs function in breast cancer. Moreover, we highlight the issues arising from CAFs heterogeneity and the need for further research to identify CAFs subpopulation(s) that can be targeted to improve breast cancer therapy.

Description: This study investigates a precision milling process conducted with the use of conventional end mills and a standard CNC (Computer Numerical Control) machine tool. Milling tests were performed on samples of AZ91D magnesium alloy using TiB2- and TiAlN-coated three-edge end mills measuring 16 mm in diameter. The following technological parameters were made variable: cutting speed, feed per tooth and axial depth of cut. The effects of precision milling were evaluated by analysing the scatter of dimension values obtained in successive tool passes. In addition to that, deviations from the assumed nominal depth as well as obtained ranges of dimension varation were analysed. The study also examined surface quality obtained in the precision milling process, based on the basic surface roughness parameters: Ra, Rz and RSm. Results have confirmed that the use of conventional cutting tools and a standard CNC machine tool makes it possible to manufacture components characterized by relatively small scatter of dimension values and high accuracy classes. Additionally, the results have shown that the type of tool coating and variations of individual technological parameters exert impact on the dimensional accuracy and surface quality obtained.

Description: This study is a specific contribution to investigating normalities in prices to a well-established cointegrated vector autoregressive model (VAR). While the role of prices in computational economics has been investigated, the real prices vis-à-vis nominal prices in the decision process has been neglected. The paper investigates the transition from nominal to real time-series of prices without losing information in the data set when deflating or de-seasonalizing. The likelihood approach is based on careful specifications of the (co)integration characteristics of tourism prices. The results confirm that the transmission of tourism prices in the Eurozone positively impacts Slovenian tourism prices when the spatial consolidated cointegrated VAR model is used. The theoretical-conceptual and empirical contribution is twofold: first, the study develops and empirically applies bona fide divisor of normality consolidation for time-series in levels instead of routinely utilised inflation integers, and second, the study introduces perfection of prices on a long-run time-series treatment.

Description: Due to their excellent mechanical properties, Co-based alloys are one of the main candidates to replace Ni-based alloys in high temperature application. Knowledge about oxidation resistance of Co-based alloy MAR M-509 and the extent of its aluminizing on its oxidation resistance is limited. Therefore, in the present study, an aluminide layer was manufactured by low activity chemical vapor deposition (LA-CVD) on MAR M-509. Aluminized and uncoated alloys were investigated in terms of oxidation kinetics and oxidation resistance during isothermal and cyclic oxidation at 1000 and 1100 °C. Material in the as-cast and after exposure was analyzed using scanning electron microscopy (SEM), thermogravimetry (TG) and glow-discharge optical emission spectrometry (GD-OES). Obtained results allowed for elucidating of degradation mechanism including nitridation process of carbides for MAR M-509. It was found that aluminizing of MAR M-509 significantly decreases its oxidation kinetics by the factor of 2.5 and 1.5 at 1000 and 1100 °C respectively. Moreover, the suppression of identified degradation mechanism in case of aluminized alloy was found until occurrence of breakaway oxidation of the aluminide layer. It was also proposed that further increase in oxidation resistance can be successively achieved by an increase in aluminide layer thickness.

Description: Carbapenem-resistant Acinetobacter baumannii (CRAB) infection has a high mortality rate, making the development of novel effective antibiotic therapeutic strategies highly critical. Antimicrobial peptides can outperform conventional antibiotics regarding drug resistance and broad-spectrum activity. PapMA, an 18-residue hybrid peptide, containing N-terminal residues of papiliocin and magainin 2, has previously demonstrated potent antibacterial activity. In this study, PapMA analogs were designed by substituting Ala15 or Phe18 with Ala, Phe, and Trp. PapMA-3 with Trp18 showed the highest bacterial selectivity against CRAB, alongside low cytotoxicity. Biophysical studies revealed that PapMA-3 permeabilizes CRAB membrane via strong binding to LPS. To reduce toxicity via reduced antibiotic doses, while preventing the emergence of multi-drug resistant bacteria, the efficacy of PapMA-3 in combination with six selected antibiotics was evaluated against clinical CRAB isolates (C1–C5). At 25% of the minimum inhibition concentration, PapMA-3 partially depolarized the CRAB membrane and caused sufficient morphological changes, facilitating the entry of antibiotics into the bacterial cell. Combining PapMA-3 with rifampin significantly and synergistically inhibited CRAB C4 (FICI = 0.13). Meanwhile, combining PapMA-3 with vancomycin or erythromycin, both potent against Gram-positive bacteria, demonstrated remarkable synergistic antibiofilm activity against Gram-negative CRAB. This study could aid in the development of combination therapeutic approaches against CRAB.

Description: Despite its severe adverse effects, such as agranulocytosis, clozapine is the primary treatment for treatment-resistant schizophrenia. The established clozapine monitoring system has contributed to reducing agranulocytosis incidence and mortality rates. However, the pandemic coronavirus disease 2019 (COVID-19) has caused changes in the monitoring system. This review aimed to assess the current evidence on the neutrophil changes in the patient on clozapine treatment and infected with COVID-19. Individual cases reported various absolute neutrophil count (ANC) levels, normal, reduced, or elevated. No agranulocytosis case was reported. One case had a borderline moderate-severe ANC level, but the patient was in the 18-week period of clozapine treatment. A cumulative analysis of case the series initially reported inconclusive results. However, a more recent study with a larger sample size reported a significant reduction in the ANC during COVID-19 infection. Nevertheless, this effect is transient as no significant difference was found between the baseline and the post-infection period in ANC levels. In conclusion, COVID-19 is associated with a temporary reduction in ANC levels. The results supported the recommendation to reduce the frequency of clozapine monitoring in the eligible candidates. However, more data are required to confirm the current findings given the limitations, including study design, sample size, and statistical analysis.

Description: Nuclear factor erythroid 2-related factor 2 Nfe2l2 (Nrf2) is believed to play a crucial role in protecting cells against oxidative stress. In addition to its primary function of maintaining redox homeostasis, there is emerging evidence that Nrf2 is also involved in energy metabolism. In this review, we briefly discuss the role of Nrf2 in skeletal muscle metabolism from the perspective of exercise physiology. This article is part of a special issue “Mitochondrial Function, Reactive Oxygen/Nitrogen Species and Skeletal Muscle” edited by Håkan Westerblad and Takashi Yamada.

Description: Rosa gallica var. aegyptiaca is a species of flowering plant belonging to the Rosaceae family that plays an important role as a therapeutic agent for the treatment of specific types of cancer, microbial infections, and diabetes mellitus. This work presents the first report on the evaluation of the antioxidant and antimicrobial potential along with the phytochemical analysis of Rosa gallica var. aegyptiaca leaves. Five leaf extracts of hexane, chloroform, methanol, hydromethanol 80%, and water were prepared. Assessment of antioxidant activity was carried out via DPPH radical scavenging assay. Antimicrobial activity against five foodborne pathogenic bacteria—including Listeria monocytogenes, Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Salmonella enteritidis—and the fungus Candida albicans, was examined using the disc diffusion method. Total phenolic content and total flavonoid content were determined using the Folin–Ciocalteu reagent and aluminum chloride methods, respectively. Isolation, identification, and quantification of phenolic compounds were performed using HPLC-DAD analysis. Amongst the five leaf extracts that were investigated, hydromethanol 80% extract possessed the highest extraction yield, antioxidant activity, total phenolic content, and antimicrobial activity against all tested microbial strains. Moreover, this extract furnished six active phenolic compounds: gallic acid (1), (+) catechin (2), chlorogenic acid (3), (–) epicatechin (4), quercetin-3-O-α-d-(glucopyranoside) (5), and quercetin (6). This study provides an alternative utilization of R. gallica var. aegyptiaca leaves as a readily accessible source of natural antioxidants and antimicrobials in the food and pharmaceutical industries.

Description: Total imperviousness (residential and non-residential) increases with population growth in many regions around the world. Population density has been used to predict the total imperviousness in large areas, although population size was only closely related to residential imperviousness. In this study, population density together with land use data for 154 suburbs in Southeast Queensland (SEQ) of Australia were used to develop a new model for total imperviousness estimation. Total imperviousness was extracted through linear spectral mixing analysis (LSMA) using Landsat 8 OLI/TIRS, and then separated into residential and non-residential areas based on land use data for each suburb. Regression models were developed between population density and total imperviousness, and population density and residential imperviousness. Results show that (1) LSMA approach could retrieve imperviousness accurately (RMSE 〈 10%), (2) linear regression models could be used to estimate both total imperviousness and residential imperviousness better than nonlinear regression models, and (3) correlation between population density and residential imperviousness was higher (R2 = 0.77) than that between population density and total imperviousness (R2 = 0.52); (4) the new model was used to predict the total imperiousness based on population density projections to 2057 for three potential urban development areas in SEQ. This research allows accurate prediction of the total impervious area from population density and service area per capital for other regions in the world.

Description: Disease gene prediction is to date one of the main computational challenges of precision medicine. It is still uncertain if disease genes have unique functional properties that distinguish them from other non-disease genes or, from a network perspective, if they are located randomly in the interactome or show specific patterns in the network topology. In this study, we propose a new method for disease gene prediction based on the use of biological knowledge-bases (gene-disease associations, genes functional annotations, etc.) and interactome network topology. The proposed algorithm called MOSES is based on the definition of two somewhat opposing sets of genes both disease-specific from different perspectives: warm seeds (i.e., disease genes obtained from databases) and cold seeds (genes far from the disease genes on the interactome and not involved in their biological functions). The application of MOSES to a set of 40 diseases showed that the suggested putative disease genes are significantly enriched in their reference disease. Reassuringly, known and predicted disease genes together, tend to form a connected network module on the human interactome, mitigating the scattered distribution of disease genes which is probably due to both the paucity of disease-gene associations and the incompleteness of the interactome.

Description: The quality and economic value of saffron, one of the most counterfeited spices, are based on three key substances that are relatively easy to measure: crocines (colour); picrocrocines (bitter); safranal (odour impact). Despite being well-known, as their concentration is correlated to sensory intensity, a detailed sensory evaluation, performed by a trained panel, supported by advanced analytical approaches, may better show the relationships between saffron composition and sensory perception. Three saffron samples of different Italian origins (Sardinia and Tuscany) were evaluated by a trained sensory panel and their chemical composition was determined by HPLC (High Performance Liquid Chromatography) and spectrophotometry. Safranal concentration and the perceived odour intensity were positively correlated while relationships between picrocrocine and bitter perception were more complex to detect. By correlating (Multiple Factor Analysis) saffron sensorial and chemical profiles, this work aims at improving saffron characterisation while providing better information on the quality of this valuable spice.

Description: In the last two decades, school coexistence in Spain has suffered an important deterioration with consequences in the quality of working life and the health of teachers, as well as in the academic performance of students. Educational administrations have promoted actions to improve it; however, the results have not been positive. To give a more adequate answer we must know in depth the scope of the problem. The objective of this study was to analyze the most common types of conflicts, the degree of incidence of each one and how they are distributed among students, as well as to determine the most important underlying cause according to the teachers. The field work was carried out during the 2018/2019 academic year, in a Secondary School located in the south of the Valencian Community (Spain). The student population was 1040, 532 women and 508 men. The research followed a mixed, qualitative, and quantitative methodology, making use of in-depth interviews with the teaching staff, participant observation and a quantitative analysis of 1501 incidents that were reported throughout the academic year. The results show us differences by sex: 84% of the incidents are produced by male students and 16% by female students. Incident distribution is very uneven among the different courses. Of the center’s problems, 88.14% are concentrated in the first two years of Compulsory Secondary Education. It is remarkable that 51% of the problems are generated by only 3% of the students, mostly men and with a significant academic disinterest; therefore, it is a very small number of students, but with a great impact on coexistence.

Description: In the present work, TiO2/ZnO hybrid nanosponges have been synthesized for the first time. First, TiO2 nanosponges were obtained by anodization under hydrodynamic conditions in a glycerol/water/NH4F electrolyte. Next, in order to achieve the anatase phase of TiO2 and improve its photocatalytic behaviour, the samples were annealed at 450 °C for 1 h. Once the TiO2 nanosponges were synthesized, TiO2/ZnO hybrid nanosponges were obtained by electrodeposition of ZnO on TiO2 nanosponges using different temperatures, times, and concentrations of zinc nitrate (Zn(NO3)2). TiO2/ZnO hybrid nanosponges were used as photoanodes in photoelectrochemical water splitting tests. The results indicate that the photoelectrochemical response improves, in the studied range, by increasing the temperature and the Zn(NO3)2 concentration during the electrodeposition process, obtaining an increase in the photoelectrochemical response of 141% for the TiO2/ZnO hybrid nanosponges electrodeposited at 75 °C with 10 mM Zn(NO3)2 for 15 min. Furthermore, morphological, chemical, and structural characterization was performed by Field Emission Scanning Electron Microscopy (FE-SEM) with Energy Dispersive X-Ray spectroscopy (EDX), Raman Confocal Laser Spectroscopy, X-Ray Photoelectron Spectroscopy (XPS), and Grazing Incidence X-Ray Diffraction (GIXRD).

Description: Changes in common and widespread insect populations such as the domestic filth fly in urban cities are useful and relevant bioindicators for overall changes in the insect biomass. The current study surveyed necrophagous flies by placing a weekly trap from June–September over a two-year period in the city of New Haven, Connecticut, to compare data on fly abundance and diversity with data collected 78 years earlier. Climate and land cover changes were also assessed in combination with the fly population for each period. The survey results suggest the domestic filth fly population is now less diverse with decreased species richness and changes in the relative abundance of species. In both surveys, 95–96% of the population was composed of only three species. The current survey data indicate the numerical dominance of Lucilia sericata has decreased, the abundance of several species, notably Lucilia coeruleiviridis, has increased, and Lucilia illustris is absent. Species that showed a significant interaction with temperature in the 1940s survey have now increased in abundance, with several of the trapped species continuing to show an interaction with temperature and rainfall. Analysis of the land cover and climate data characterizes the trap site as a region exposed to a prolonged period of industrialization and urbanization, with only 7% of the land cover remaining undeveloped and over 50% impervious, coupled with an increase in temperature and rainfall. This study serves as a model for changes in domestic filth fly populations and other insects in similarly highly urbanized established cities.

Description: To improve the quality and control accuracy of the farming tractor electro-hydraulic hitch system, a variable-universe fuzzy control algorithm is introduced herein based on force–position mixed adjustment. (1) Background: This research sought to improve the operation quality and control precision of the tractor electro-hydraulic suspension operation system by solving the slow response and low precision problems in the target value control of the system. (2) Methods: According to the characteristics of the operating system, the working principle is discussed. The variable-universe fuzzy controller and the control module were designed based on MC9S12XS128. At the same time, we used Matlab/Simulink to study the step response, and field tests were carried out based on the existing test conditions. (3) Results: In the response stage, the variable-universe fuzzy control only needs 5.85 s, and there is no overshoot problem; in the normal tillage stage, the maximum tillage depth difference is only 1.6 cm, and the traction force is 428 N, which is closer to the expected value. (4) Conclusions: The farming quality and efficiency of the operating system were improved. Additionally, the operating system can also provide technical support for intelligent agricultural machinery and the field management mode in the future.

Description: In order to assess the sustainability of silvicultural treatments in semiarid forests, it is necessary to know how they affect the nutrient dynamics in the forest. The objective of this paper is to study the effects of silvicultural treatments on the net N mineralization and the available mineral N content in the soil after 13 years following forest clearings. The treatments were carried out following a randomized block design, with four treatments and two blocks. The distance between the two blocks was less than 3 km; they were located in Chelva (CH) and Tuéjar (TU) in Valencia, Spain. Within each block, four experimental clearing treatments were carried out in 1998: T0 control; and T60, T75 and T100 where 60%, 75% and 100 of basal area was eliminated, respectively. Nitrogen dynamics were measured using the resin tube technique, with disturbed samples due to the high stoniness of the plots. Thirteen years after the experimental clearings, T100, T75 and T60 treatments showed a twofold increase in the net mineralization and nitrification rates with respect to T0 in both blocks (TU and CH). Within the plots, the highest mineralization was found in sites with no plant cover followed by those covered by undergrowth. These results can be explained in terms of the different litterfall qualities, which in turn are the result of the proportion of material originating from Pinus halepensis Mill. vs. more decomposable undergrowth residues.

Description: COVID-19 has brought serious challenges to education and many other sectors. Within the educational context, the main difficulties experienced have been reported as challenges related to not only mechanical impediments—such as technology or infrastructure—but also to methodological and personal features, such as lack of motivation or online learning/teaching experiences. The abrupt transition from face-to-face to online education has created the need for some specific abilities, such as digital literacy on the side of the learners at all educational levels. In this context, this mixed-method study aims to determine the digital literacy levels of learners belonging to different school levels and whether age, gender and school degree were significant variables. This study also investigates the technology-related challenges students experienced during COVID-19 pandemic. The sample consisted of 510 participants representing different school levels, age groups, and genders; in addition, a smaller representative group (n = 30) revealed their own evaluations related to their levels of digital literacy and the technology-related challenges they had about online learning. The findings suggest that there is a statistically significant relationship between students’ digital literacy and their gender and school degree, while age was not found to be a statistically significant variable. The qualitative self-reported data suggested that learners have sufficient levels of digital literacy, and that the major technology-related challenges were reported to be lack of the necessary technologies and difficulties in adapting to a new approach to learning.

Description: The construction sector is one of the main contributors to greenhouse gas emissions and consumers of energy, making it one of the most relevant sectors when planning reduction strategies and policies. The use of timber in the built environment has been identified as a key strategy to reduce the carbon footprint of the construction sector. In this paper, we use the concept of policy gap analysis to identified underlying challenges in the implementation of timber construction on three Nordic countries, Finland, Norway, and Sweden. We carried out a series of semi-structured interviews with experts from the countries of study. The interviews came from industry, government, and construction companies. The use of the gap analysis approach was useful not only to identify areas that are being targeted but also those areas that were not covered by any programme at the time of study. The results showed that the studied programmes have a large level of coverage and congruence with the identified challenges. Moreover, they also showed that challenges related to fire safety regulations and insurance policies for timber buildings still need to be addressed, whereas the challenges of high price variability and lack of promotion are being addressed by multiple programmes. With this work, we have seen how timber construction is gaining momentum and how the challenges have been addressed systematically.

Description: In this paper, a dual-polarized four-port 2 × 2 series fed antenna array operating at 28 GHz with beam-switching capability is proposed. The antenna array uses a simple passive beamforming network to switch the main beam. The presented antenna design is suitable for 5G user equipment and high data rates applications by which it has a compact size with low cost and complexity. The size of the antenna is 37.2 × 37.2 mm2 including the ground plane, and it produces 10 different switched beams by using only two simple 3 dB/90∘ couplers which create the required amplitudes and phase excitations for the antenna elements. A one-port simple feeding mechanism including Peregrine PE42525 SPDT switch modules and a power divider is used to generate and measure the 10 switched beams. The antenna design is implemented on a two-layer 0.203 mm thick low-loss (tanδ = 0.0027) Rogers 4003C substrate, and it has a measured 10 dB impedance bandwidth of 4 GHz (14.3%, from 26 GHz to 30 GHz) for all ports. Measured peak isolation between any dual-polarized ports of the antenna is better than 30 dB. The antenna has an average measured realized gain of 8.9 dBi and around 10 dB side lobe level (SLL) for all beams. The antenna has 3-dB coverage of 80∘ to 90∘ in 2D space and it has a maximum of ±26∘ beam-steering angle. The antenna is designed and simulated using Ansys HFSS and fabricated using regular PCB processing.

Description: Severe convective windstorms and tornadoes regularly hit the territory of Russia causing substantial damage and fatalities. An analysis of the climatology and formation environments of these events is essential for risk assessments, forecast improvements and identifying of links with the observed climate change. In this paper, we present an analysis of severe convective windstorms, i.e., squalls and tornadoes reported between 1984 and 2020 in the Perm region (northeast of European Russia), where a local maximum in the frequency of such events was previously found. The analysed database consists of 165 events and includes 100 squalls (convective windstorms), 59 tornadoes, and six cases with both tornadoes and squalls. We used various information to compile the database including weather station reports, damage surveys, media reports, previously presented databases, and satellite images for windthrow. We found that the satellite images of damaged forests are the main data source on tornadoes, but their role is substantially lower for windstorm events due to the larger spatial and temporal scale of such events. Synoptic-scale environments and associated values of convective indices were determined for each event with a known date and time. Similarities and differences for the formation conditions of tornadoes and windstorms were revealed. Both squalls and tornadoes occur mostly on rapidly moving cold fronts or on waving quasi-stationary fronts, associated with low-pressure systems. Analyses of 72-h air parcel backward trajectories shows that the Caspian and Aral Seas are important sources of near-surface moisture for the formation of both squalls and tornadoes. Most of these events are formed within high CAPE and high shear environments, but tornadic storms are generally characterised by a higher wind shear and helicity. We also differentiated convective storms that caused forest damage and those did not. We found the composite parameter WMAXSHEAR is the best discriminator between these two groups. In general, storm events causing windthrow mainly occur under conditions more favourable for deep well-organised convection. Thus, forest damage can be considered as an indicator of the storm severity in the Perm region and in adjacent regions with forest-covered area exceeding 50%.

Description: We consider alternative possibilities for hedging spot positions on the FTSE LATIBEX Index, the index of the only international market exclusively for Latin American firms that is denominated by the euro. Since there is not a futures market on the index, it is unclear whether a relatively successful hedge can be found. We explore the plausibility of employing futures on four stock market indices: EUROSTOXX 50, S&P500, BOVESPA, and IPC, and simulate the results that could be obtained by a hedge position based on either unconditional or conditional second order moments estimated from different asymmetric GARCH models. Several criteria for hedging effectiveness suggest that futures contracts on BOVESPA should be preferred, and that a salient reduction in risk can be achieved over the unhedged LATIBEX portfolio. The evidence in favor of a better performance of conditional moments is very clear, without significant differences among the alternative GARCH specifications.

Description: This paper summarizes the results from microclimatic monitoring of the impacts related to the construction and exploration phase of a hydroelectric powerplant in the upper Douro River (Portugal). Reference climatic elements for both periods were obtained and the impacts of the reservoir water mass on the region’s microclimate were evaluated. For this purpose, Sen’s slope estimate non-parametric test was used to detect the meteorological variables’ trends over 10 years, considering the division into the construction (2011–2015) and exploration (2016–2020) phases. A network of meteorological stations located close to the dam, in addition to a control station relatively distant from the dam, was used to collect the meteorological data. The control station is still integrated into the same regional climatic context but not exposed to the direct influence of the resulting reservoirs. As a result, temporal differences were determined for temperature and relative humidity. The results show a statistically significant increase in the minimum relative humidity, accompanied by a statistically significant decrease in the daily and seasonal temperature amplitudes between the construction and the exploration phase periods. These outcomes thereby suggest that large reservoirs affect the local climate and may create new microclimates, in the surrounding area, with both positive and negative potential effects.

Description: In the first quarter of 2020, Italy became one of the earliest hotspots of COVID-19 infection, and the government imposed a lockdown. During the lockdown, an online survey of 2053 adults was conducted that asked about health behaviors and about the psychological and overall impact of COVID-19. The present study is a secondary analysis of that data. We hypothesized that self-control, higher socio-economic status, existing health conditions, and fear of infection were all inversely related to actions (or intentions) that violated the lockdown (i.e., infractions). Using partial least squares structural equation modeling (PLS-SEM), we found that only the fear of infection significantly dissuaded people from violating lockdown rules. Since it is not practical or ethical to sow a fear of infection, our study indicates that enacting rules and enforcing them firmly and fairly are important tools for containing the infection. This may become more important as vaccines become more widely available and people lose their fear of infection.

Description: In Europe, the qualification of injection anchors in masonry under static and quasi-static actions is based on an assessment of tests performed in undamaged masonry. Nevertheless, in seismic prone countries like Italy the influences deriving from earthquake actions cannot be disregarded. Masonry elements are very sensitive to cyclic/seismic action and research on the behavior of anchors in damaged masonry is rather limited. The paper presents the results of an experimental campaign aimed at evaluating the residual tensile strength of adhesive anchors installed into undamaged walls that were subsequently subjected to cyclic in-plane loading to simulate seismic actions before. Consequently, the anchors experienced different stresses depending on their location within the walls. Overall, 29 tests were performed with anchors placed both, in undamaged and damaged areas. The results showed that there is a correlation between residual tensile strength and masonry initial conditions, and therefore the installation of anchors in masonry elements should be carefully planned avoiding areas that could be heavily damaged during seismic events or considering redundant connections in critical areas. In particular, it seems that the width of the crack (created by cyclic actions) that passes nearby/into the anchor borehole is the main parameter that affects the ultimate resistance of the anchors.

Description: This study aimed to investigate the effects of multi-bacteria solid-state fermented diets with different crude fiber (CF) levels on growth performance, nutrient digestibility, and microbial flora of finishing pigs. The multi-bacteria solid-state fermented diets were made up of Lactobacillus amylovorus, Enterococcus faecalis, Bacillus subtilis, and Candida utilis. According to a 2 (factors) × 2 (levels) design, with the two factors being multi-bacteria solid-state fermentation (fed non-fermented diet or multi-bacteria fermentation) or CF levels (fed a basal diet containing 2.52% CF or 7.00% CF), a total of 36 finishing pigs (70.80 ± 5.75 kg) were divided into 4 treatments with 9 barrows per group: (1) pigs fed a diet containing 7.00% CF (HF), (2) pigs fed a multi-bacteria fermentation diet containing 7.00% CF (HFM), (3) pigs fed a diet containing 2.52% CF (LF), and (4) piglets fed a multi-bacteria fermentation diet containing 2.52% CF (LFM). This experiment lasted 28 days. The multi-bacteria solid-state fermented diet increased the backfat thickness (p 〈 0.05) and apparent total tract nutrient digestibility (ATTD) of CF, neutral detergent fiber (NDF), acid detergent fiber (ADF), crude protein (CP), 8 amino acids (Trp, Asp, Gly, Cys, Val, Met, Ile, and Leu), total essential amino acids (EAA), total non-essential amino acids (NEEA), and total amino acids (TAA) (p 〈 0.05). Multi-bacteria solid-state fermented diet increased serum concentrations of HDL-c, ABL, TP, and GLU, the serum enzyme activities of GSH-Px, T-AOC, SOD, and CAT (p 〈 0.05), the relative abundance of Lactobacillus, Oscillospira, and Coprococcus (p 〈 0.05), and the abundance of YAMINSYN3-PWY, PWY-7013, GOLPDLCAT-PWY, ARGORNPROST-PWY, and PWY-5022 pathways (p 〈 0.05). The multi-bacteria solid-state fermented diet reduced the digestion amount of CF, NDF, and ADF (p 〈 0.05), the serum concentrations of TC, TG, LDL-c, BUN, and MDA (p 〈 0.05), the relative abundance of Streptococcaceae (p 〈 0.05), and the abundance of PWY-6470, PWY0-862, HSERMETANA-PWY, LACTOSECAT-PWY, MET-SAM-PWY, PWY-6700, PWY-5347, PWY0-1061, and LACTOSECAT-PWY pathways (p 〈 0.05). The high-fiber diet increased average daily feed intake (p 〈 0.05), the serum concentrations of TC, TG, LDL-c, BUN, and MDA (p 〈 0.05), the relative abundance of Clostridiaceae_Clostridium and Coprococcus (p 〈 0.05), and the abundance of TCA-GLYOX-BYPASS, GLYCOLYSIS-TCA-GLYOX-BYPASS, and PWY-6906 pathways (p 〈 0.05). The high-fiber diet reduced chest circumference (p 〈 0.05) and ATTD of ether extract (EE), CF, NDF, ADF, Ca, CP, 18 amino acids (Trp, Thr, Val, Met, Ile, Leu, Phe, Lys, His, Arg Asp, Ser, Glu, Gly, Ala, Cys, Tyr, and Pro), EAA, NEAA, and TAA (p 〈 0.05). The high-fiber diet also reduced the serum concentrations of HDL-c, TP, ABL, and GLU, the serum enzyme activities of T-AOC, GSH-Px, SOD, and CAT (p 〈 0.05), and the relative abundance of Akkermansia and Oscillospira (p 〈 0.05). There was no significant effect of the interaction between multi-bacteria fermentation and dietary CF levels, except on the digestion amount of CF (p 〈 0.05). The 7.00% CF had a negative effect on the digestion of nutrients, but multi-bacteria solid-state fermentation diets could relieve this negative effect and increase backfat thickness. High-fiber diets and multi-bacteria solid-state fermentation improved the diversity and abundance of fecal microorganisms in finishing pigs.

Description: In this paper, a hybrid bat optimization algorithm based on variable neighbourhood structure and two learning strategies is proposed to solve a three-stage distributed assembly permutation flowshop scheduling problem to minimize the makespan. The algorithm is firstly designed to increase the population diversity by classifying the populations, which solves the difficult trade-off between convergence and diversity of the bat algorithm. Secondly, a selection mechanism is used to update the bat’s velocity and location, solving the difficulty of the algorithm to trade-off exploration and mining capacity. Finally, the Gaussian learning strategy and elite learning strategy assist the whole population to jump out of the local optimal frontier. The simulation results demonstrate that the algorithm proposed in this paper can well solve the DAPFSP. In addition, compared with other metaheuristic algorithms, IHBA has better performance and gives full play to its advantage of finding optimal solutions.

Description: The United Nations 2030 Agenda has emphasized the potential of digital technology to enhance sustainability performance, assuming that digital transformation can enable firms’ convergence toward the Sustainable Development Goals. Despite this, the literature is unclear regarding whether there is a positive relationship between digitalization and sustainability, as the effects of digital transformation are controversial. The main goal of this study was to assess the hypothesis that digital technology contributes to the achievement of Sustainable Development Goals within the UN 2030 Agenda. To test this hypothesis, a textual analysis was performed to assess Italian firms’ digitalization efforts; the obtained results were then related to the selected firms’ ESG scores using a regression analysis. The analysis focused on Italian FTSE MIB listed firms for the period 2016–2019. The findings show a positive relation between digitalization and Sustainable Development Goals, highlighting the relevance of digital technology in implementing the sustainability agenda.

Description: Cadmium (Cd) is one of the most injurious heavy metals, affecting plant growth and development. Melatonin (N-acetyl-5-methoxytryptamine) was discovered in plants in 1995, and it is since known to act as a multifunctional molecule to alleviate abiotic and biotic stresses, especially Cd stress. Endogenously triggered or exogenously applied melatonin re-establishes the redox homeostasis by the improvement of the antioxidant defense system. It can also affect the Cd transportation and sequestration by regulating the transcripts of genes related to the major metal transport system, as well as the increase in glutathione (GSH) and phytochelatins (PCs). Melatonin activates several downstream signals, such as nitric oxide (NO), hydrogen peroxide (H2O2), and salicylic acid (SA), which are required for plant Cd tolerance. Similar to the physiological functions of NO, hydrogen sulfide (H2S) is also involved in the abiotic stress-related processes in plants. Moreover, exogenous melatonin induces H2S generation in plants under salinity or heat stress. However, the involvement of H2S action in melatonin-induced Cd tolerance is still largely unknown. In this review, we summarize the progresses in various physiological and molecular mechanisms regulated by melatonin in plants under Cd stress. The complex interactions between melatonin and H2S in acquisition of Cd stress tolerance are also discussed.

Description: To respond to global climate change and achieve a “carbon peak” and “carbon neutrality” as soon as possible has become a common goal around the world. Economic growth relies heavily on financial development; indeed, low-carbon economic development is inseparable from financial support. This paper studies the impact of financial development on carbon emission intensity and its mechanism from both theoretical and empirical aspects. Based on the 2005–2018 data on Chinese cities and the Spatial Durbin Model (SDM) research results, this paper finds that: (1) Financial development has significantly reduced China’s carbon emission intensity overall. After considering spatial effects, financial development increases local carbon emission intensity, although it may lead to a more significant decrease in the surrounding area. (2) The analysis of heterogeneity shows that only the financial development in the eastern region has a substantial detrimental impact on total carbon emission intensity and the carbon emission intensity of neighboring cities. The financial development in the central and western regions has no significant effect on carbon emission intensity. (3) The mechanism test shows that financial development mainly reduces carbon emission intensity through technological innovation and structural optimization, with the effect of technological innovation being 9.5%, and the effect of structural optimization being 12.15%. The expansion of the consumption effects of financial development has no significant impact on carbon emission intensity. Accordingly, this article believes that it is necessary to further support financial development, build large-scale financial centers, continue to optimize the structure of financial products, and encourage the development of green finance.