ALBERT

Beschreibung: When cumulonimbus clouds aggregate, developing into a single entity with precipitation covering a horizontal scale of hundreds of kilometers, they are called mesoscale convective systems (MCSs). They account for much of Earth’s precipitation, generate severe weather events and flooding, produce prodigious cirriform anvil clouds, and affect the evolution of the larger-scale circulation. Understanding the inner workings of MCSs has resulted from developments in observational technology and modeling. Time–space conversion of ordinary surface and upper-air observations provided early insight into MCSs, but deeper understanding has followed field campaigns using increasingly sophisticated radars, better aircraft instrumentation, and an ever-widening range of satellite instruments, especially satellite-borne radars. High-resolution modeling and theoretical insights have shown that aggregated cumulonimbus clouds induce a mesoscale circulation consisting of air overturning on a scale larger than the scale of individual convective up- and downdrafts. These layers can be kilometers deep and decoupled from the boundary layer in elevated MCSs. Cooling in the lower troposphere and heating aloft characterize the stratiform regions of MCSs. As a result, long-lived MCSs with large stratiform regions have a top-heavy heating profile that generates potential vorticity in midlevels, thus influencing the larger-scale circulation within which the MCSs occur. Global satellite data show MCSs varying in structure, depending on the prevailing large-scale circulation and topography. These patterns are likely to change with global warming. In addition, environmental pollution affects MCS structure and dynamics subtly. Feedbacks of MCSs therefore need to be included or parameterized in climate models.

Beschreibung: We describe the historical evolution of the conceptualization, formulation, quantification, application, and utilization of “radiative forcing” (RF) of Earth’s climate. Basic theories of shortwave and longwave radiation were developed through the nineteenth and twentieth centuries and established the analytical framework for defining and quantifying the perturbations to Earth’s radiative energy balance by natural and anthropogenic influences. The insight that Earth’s climate could be radiatively forced by changes in carbon dioxide, first introduced in the nineteenth century, gained empirical support with sustained observations of the atmospheric concentrations of the gas beginning in 1957. Advances in laboratory and field measurements, theory, instrumentation, computational technology, data, and analysis of well-mixed greenhouse gases and the global climate system through the twentieth century enabled the development and formalism of RF; this allowed RF to be related to changes in global-mean surface temperature with the aid of increasingly sophisticated models. This in turn led to RF becoming firmly established as a principal concept in climate science by 1990. The linkage with surface temperature has proven to be the most important application of the RF concept, enabling a simple metric to evaluate the relative climate impacts of different agents. The late 1970s and 1980s saw accelerated developments in quantification, including the first assessment of the effect of the forcing due to the doubling of carbon dioxide on climate (the “Charney” report). The concept was subsequently extended to a wide variety of agents beyond well-mixed greenhouse gases (WMGHGs; carbon dioxide, methane, nitrous oxide, and halocarbons) to short-lived species such as ozone. The WMO and IPCC international assessments began the important sequence of periodic evaluations and quantifications of the forcings by natural (solar irradiance changes and stratospheric aerosols resulting from volcanic eruptions) and a growing set of anthropogenic agents (WMGHGs, ozone, aerosols, land surface changes, contrails). From the 1990s to the present, knowledge and scientific confidence in the radiative agents acting on the climate system have proliferated. The conceptual basis of RF has also evolved as both our understanding of the way radiative forcing drives climate change and the diversity of the forcing mechanisms have grown. This has led to the current situation where “effective radiative forcing” (ERF) is regarded as the preferred practical definition of radiative forcing in order to better capture the link between forcing and global-mean surface temperature change. The use of ERF, however, comes with its own attendant issues, including challenges in its diagnosis from climate models, its applications to small forcings, and blurring of the distinction between rapid climate adjustments (fast responses) and climate feedbacks; this will necessitate further elaboration of its utility in the future. Global climate model simulations of radiative perturbations by various agents have established how the forcings affect other climate variables besides temperature (e.g., precipitation). The forcing–response linkage as simulated by models, including the diversity in the spatial distribution of forcings by the different agents, has provided a practical demonstration of the effectiveness of agents in perturbing the radiative energy balance and causing climate changes. The significant advances over the past half century have established, with very high confidence, that the global-mean ERF due to human activity since preindustrial times is positive (the 2013 IPCC assessment gives a best estimate of 2.3 W m−2, with a range from 1.1 to 3.3 W m−2; 90% confidence interval). Further, except in the immediate aftermath of climatically significant volcanic eruptions, the net anthropogenic forcing dominates over natural radiative forcing mechanisms. Nevertheless, the substantial remaining uncertainty in the net anthropogenic ERF leads to large uncertainties in estimates of climate sensitivity from observations and in predicting future climate impacts. The uncertainty in the ERF arises principally from the incorporation of the rapid climate adjustments in the formulation, the well-recognized difficulties in characterizing the preindustrial state of the atmosphere, and the incomplete knowledge of the interactions of aerosols with clouds. This uncertainty impairs the quantitative evaluation of climate adaptation and mitigation pathways in the future. A grand challenge in Earth system science lies in continuing to sustain the relatively simple essence of the radiative forcing concept in a form similar to that originally devised, and at the same time improving the quantification of the forcing. This, in turn, demands an accurate, yet increasingly complex and comprehensive, accounting of the relevant processes in the climate system.

Beschreibung: Today’s global Earth system models began as simple regional models of tropospheric weather systems. Over the past century, the physical realism of the models has steadily increased, while the scope of the models has broadened to include the global troposphere and stratosphere, the ocean, the vegetated land surface, and terrestrial ice sheets. This chapter gives an approximately chronological account of the many and profound conceptual and technological advances that made today’s models possible. For brevity, we omit any discussion of the roles of chemistry and biogeochemistry, and terrestrial ice sheets.

Beschreibung: The central change in understanding of the ocean circulation during the past 100 years has been its emergence as an intensely time-dependent, effectively turbulent and wave-dominated, flow. Early technologies for making the difficult observations were adequate only to depict large-scale, quasi-steady flows. With the electronic revolution of the past 50+ years, the emergence of geophysical fluid dynamics, the strongly inhomogeneous time-dependent nature of oceanic circulation physics finally emerged. Mesoscale (balanced), submesoscale oceanic eddies at 100-km horizontal scales and shorter, and internal waves are now known to be central to much of the behavior of the system. Ocean circulation is now recognized to involve both eddies and larger-scale flows with dominant elements and their interactions varying among the classical gyres, the boundary current regions, the Southern Ocean, and the tropics.

Beschreibung: This chapter reviews the history of the discovery of cloud nuclei and their impacts on cloud microphysics and the climate system. Pioneers including John Aitken, Sir John Mason, Hilding Köhler, Christian Junge, Sean Twomey, and Kenneth Whitby laid the foundations of the field. Through their contributions and those of many others, rapid progress has been made in the last 100 years in understanding the sources, evolution, and composition of the atmospheric aerosol, the interactions of particles with atmospheric water vapor, and cloud microphysical processes. Major breakthroughs in measurement capabilities and in theoretical understanding have elucidated the characteristics of cloud condensation nuclei and ice nucleating particles and the role these play in shaping cloud microphysical properties and the formation of precipitation. Despite these advances, not all their impacts on cloud formation and evolution have been resolved. The resulting radiative forcing on the climate system due to aerosol–cloud interactions remains an unacceptably large uncertainty in future climate projections. Process-level understanding of aerosol–cloud interactions remains insufficient to support technological mitigation strategies such as intentional weather modification or geoengineering to accelerating Earth-system-wide changes in temperature and weather patterns.

Beschreibung: Over the past 100 years, the collaborative effort of the international science community, including government weather services and the media, along with the associated proliferation of environmental observations, improved scientific understanding, and growth of technology, has radically transformed weather forecasting into an effective global and regional environmental prediction capability. This chapter traces the evolution of forecasting, starting in 1919 [when the American Meteorological Society (AMS) was founded], over four eras separated by breakpoints at 1939, 1956, and 1985. The current state of forecasting could not have been achieved without essential collaboration within and among countries in pursuing the common weather and Earth-system prediction challenge. AMS itself has had a strong role in enabling this international collaboration.

Beschreibung: The year 1919 was important in meteorology, not only because it was the year that the American Meteorological Society was founded, but also for two other reasons. One of the foundational papers in extratropical cyclone structure by Jakob Bjerknes was published in 1919, leading to what is now known as the Norwegian cyclone model. Also that year, a series of meetings was held that led to the formation of organizations that promoted the international collaboration and scientific exchange required for extratropical cyclone research, which by necessity involves spatial scales spanning national borders. This chapter describes the history of scientific inquiry into the structure, evolution, and dynamics of extratropical cyclones, their constituent fronts, and their attendant jet streams and storm tracks. We refer to these phenomena collectively as the centerpiece of meteorology because of their central role in fostering meteorological research during this century. This extremely productive period in extratropical cyclone research has been possible because of 1) the need to address practical challenges of poor forecasts that had large socioeconomic consequences, 2) the intermingling of theory, observations, and diagnosis (including dynamical modeling) to provide improved physical understanding and conceptual models, and 3) strong international cooperation. Conceptual frameworks for cyclones arise from a desire to classify and understand cyclones; they include the Norwegian cyclone model and its sister the Shapiro–Keyser cyclone model. The challenge of understanding the dynamics of cyclones led to such theoretical frameworks as quasigeostrophy, baroclinic instability, semigeostrophy, and frontogenesis. The challenge of predicting explosive extratropical cyclones in particular led to new theoretical developments such as potential-vorticity thinking and downstream development. Deeper appreciation of the limits of predictability has resulted from an evolution from determinism to chaos. Last, observational insights led to detailed cyclone and frontal structure, storm tracks, and rainbands.

Beschreibung: Mountains significantly influence weather and climate on Earth, including disturbed surface winds; altered distribution of precipitation; gravity waves reaching the upper atmosphere; and modified global patterns of storms, fronts, jet streams, and climate. All of these impacts arise because Earth’s mountains penetrate deeply into the atmosphere. This penetration can be quantified by comparing mountain heights to several atmospheric reference heights such as density scale height, water vapor scale height, airflow blocking height, and the height of natural atmospheric layers. The geometry of Earth’s terrain can be analyzed quantitatively using statistical, matrix, and spectral methods. In this review, we summarize how our understanding of orographic effects has progressed over 100 years using the equations for atmospheric dynamics and thermodynamics, numerical modeling, and many clever in situ and remote sensing methods. We explore how mountains disturb the surface winds on our planet, including mountaintop winds, severe downslope winds, barrier jets, gap jets, wakes, thermally generated winds, and cold pools. We consider the variety of physical mechanisms by which mountains modify precipitation patterns in different climate zones. We discuss the vertical propagation of mountain waves through the troposphere into the stratosphere, mesosphere, and thermosphere. Finally, we look at how mountains distort the global-scale westerly winds that circle the poles and how varying ice sheets and mountain uplift and erosion over geologic time may have contributed to climate change.

Beschreibung: The stratosphere contains ~17% of Earth’s atmospheric mass, but its existence was unknown until 1902. In the following decades our knowledge grew gradually as more observations of the stratosphere were made. In 1913 the ozone layer, which protects life from harmful ultraviolet radiation, was discovered. From ozone and water vapor observations, a first basic idea of a stratospheric general circulation was put forward. Since the 1950s our knowledge of the stratosphere and mesosphere has expanded rapidly, and the importance of this region in the climate system has become clear. With more observations, several new stratospheric phenomena have been discovered: the quasi-biennial oscillation, sudden stratospheric warmings, the Southern Hemisphere ozone hole, and surface weather impacts of stratospheric variability. None of these phenomena were anticipated by theory. Advances in theory have more often than not been prompted by unexplained phenomena seen in new stratospheric observations. From the 1960s onward, the importance of dynamical processes and the coupled stratosphere–troposphere circulation was realized. Since approximately 2000, better representations of the stratosphere—and even the mesosphere—have been included in climate and weather forecasting models. We now know that in order to produce accurate seasonal weather forecasts, and to predict long-term changes in climate and the future evolution of the ozone layer, models with a well-resolved stratosphere with realistic dynamics and chemistry are necessary.

Beschreibung: Satellite meteorology is a relatively new branch of the atmospheric sciences. The field emerged in the late 1950s during the Cold War and built on the advances in rocketry after World War II. In less than 70 years, satellite observations have transformed the way scientists observe and study Earth. This paper discusses some of the key advances in our understanding of the energy and water cycles, weather forecasting, and atmospheric composition enabled by satellite observations. While progress truly has been an international achievement, in accord with a monograph observing the centennial of the American Meteorological Society, as well as limited space, the emphasis of this chapter is on the U.S. satellite effort.

Beschreibung: This chapter outlines the development of our understanding of several examples of mesoscale atmospheric circulations that are tied directly to surface forcings, starting from thermally driven variations over the ocean and progressing inland to man-made variations in temperature and roughness, and ending with forced boundary layer circulations. Examples include atmospheric responses to 1) overocean temperature variations, 2) coastlines (sea breezes), 3) mesoscale regions of inland water (lake-effect storms), and 4) variations in land-based surface usage (urban land cover). This chapter provides brief summaries of the historical evolution of, and tools for, understanding such mesoscale atmospheric circulations and their importance to the field, as well as physical processes responsible for initiating and determining their evolution. Some avenues of future research we see as critical are provided. The American Meteorological Society (AMS) has played a direct and important role in fostering the development of understanding mesoscale surface-forced circulations. The significance of AMS journal publications and conferences on this and interrelated atmospheric, oceanic, and hydrological fields, as well as those by sister scientific organizations, are demonstrated through extensive relevant citations.

Beschreibung: Although atmospheric observing systems were already an important part of meteorology before the American Meteorological Society was established in 1919, the past 100 years have seen a steady increase in their numbers and types. Examples of how observing systems were developed and how they have enabled major scientific discoveries are presented. These examples include observing systems associated with the boundary layer, the upper air, clouds and precipitation, and solar and terrestrial radiation. Widely used specialized observing systems such as radar, lidar, and research aircraft are discussed, and examples of applications to weather forecasting and climate are given. Examples drawn from specific types of chemical measurements, such as ozone and carbon dioxide, are included. Sources of information on observing systems, including other chapters of this monograph, are also discussed. The past 100 years has been characterized by synergism between societal needs for weather observations and the needs of fundamental meteorological research into atmospheric processes. In the latter half of the period, observing system improvements have been driven by the increasing demands for higher-resolution data for numerical models, the need for long-term measurements, and for more global coverage. This has resulted in a growing demand for data access and for integrating data from an increasingly wide variety of observing system types and networks. These trends will likely continue.

Beschreibung: The history of over 100 years of observing the ocean is reviewed. The evolution of particular classes of ocean measurements (e.g., shipboard hydrography, moorings, and drifting floats) are summarized along with some of the discoveries and dynamical understanding they made possible. By the 1970s, isolated and “expedition” observational approaches were evolving into experimental campaigns that covered large ocean areas and addressed multiscale phenomena using diverse instrumental suites and associated modeling and analysis teams. The Mid-Ocean Dynamics Experiment (MODE) addressed mesoscale “eddies” and their interaction with larger-scale currents using new ocean modeling and experiment design techniques and a suite of developing observational methods. Following MODE, new instrument networks were established to study processes that dominated ocean behavior in different regions. The Tropical Ocean Global Atmosphere program gathered multiyear time series in the tropical Pacific to understand, and eventually predict, evolution of coupled ocean–atmosphere phenomena like El Niño–Southern Oscillation (ENSO). The World Ocean Circulation Experiment (WOCE) sought to quantify ocean transport throughout the global ocean using temperature, salinity, and other tracer measurements along with fewer direct velocity measurements with floats and moorings. Western and eastern boundary currents attracted comprehensive measurements, and various coastal regions, each with its unique scientific and societally important phenomena, became home to regional observing systems. Today, the trend toward networked observing arrays of many instrument types continues to be a productive way to understand and predict large-scale ocean phenomena.

Beschreibung: In situ observation networks and reanalyses products of the state of the atmosphere and upper ocean show well-defined, large-scale patterns of coupled climate variability on time scales ranging from seasons to several decades. We summarize these phenomena and their physics, which have been revealed by analysis of observations, by experimentation with uncoupled and coupled atmosphere and ocean models with a hierarchy of complexity, and by theoretical developments. We start with a discussion of the seasonal cycle in the equatorial tropical Pacific and Atlantic Oceans, which are clearly affected by coupling between the atmosphere and the ocean. We then discuss the tropical phenomena that only exist because of the coupling between the atmosphere and the ocean: the Pacific and Atlantic meridional modes, the El Niño–Southern Oscillation (ENSO) in the Pacific, and a phenomenon analogous to ENSO in the Atlantic. For ENSO, we further discuss the sources of irregularity and asymmetry between warm and cold phases of ENSO, and the response of ENSO to forcing. Fundamental to variability on all time scales in the midlatitudes of the Northern Hemisphere are preferred patterns of uncoupled atmospheric variability that exist independent of any changes in the state of the ocean, land, or distribution of sea ice. These patterns include the North Atlantic Oscillation (NAO), the North Pacific Oscillation (NPO), and the Pacific–North American (PNA) pattern; they are most active in wintertime, with a temporal spectrum that is nearly white. Stochastic variability in the NPO, PNA, and NAO force the ocean on days to interannual times scales by way of turbulent heat exchange and Ekman transport, and on decadal and longer time scales by way of wind stress forcing. The PNA is partially responsible for the Pacific decadal oscillation; the NAO is responsible for an analogous phenomenon in the North Atlantic subpolar gyre. In models, stochastic forcing by the NAO also gives rise to variability in the strength of the Atlantic meridional overturning circulation (AMOC) that is partially responsible for multidecadal anomalies in the North Atlantic climate known as the Atlantic multidecadal oscillation (AMO); observations do not yet exist to adequately determine the physics of the AMO. We review the progress that has been made in the past 50 years in understanding each of these phenomena and the implications for short-term (seasonal-to-interannual) climate forecasts. We end with a brief discussion of advances of things that are on the horizon, under the rug, and over the rainbow.

Beschreibung: s The history of severe thunderstorm research and forecasting over the past century has been a remarkable story involving interactions between technological development of observational and modeling capabilities, research into physical processes, and the forecasting of phenomena with the goal of reducing loss of life and property. Perhaps more so than any other field of meteorology, the relationship between researchers and forecasters has been particularly close in the severe thunderstorm domain, with both groups depending on improved observational capabilities. The advances that have been made have depended on observing systems that did not exist 100 years ago, particularly radar and upper-air systems. They have allowed scientists to observe storm behavior and structure and the environmental setting in which storms occur. This has led to improved understanding of processes, which in turn has allowed forecasters to use those same observational systems to improve forecasts. Because of the relatively rare and small-scale nature of many severe thunderstorm events, severe thunderstorm researchers have developed mobile instrumentation capabilities that have allowed them to collect high-quality observations in the vicinity of storms. Since much of the world is subject to severe thunderstorm hazards, research has taken place around the world, with the local emphasis dependent on what threats are perceived in that area, subject to the availability of resources to study the threat. Frequently, the topics of interest depend upon a single event, or a small number of events, of a particular kind that aroused public or economic interests in that area. International cooperation has been an important contributor to collecting and disseminating knowledge. As the AMS turns 100, the range of research relating to severe thunderstorms is expanding. The time scale of forecasting or projecting is increasing, with work going on to study forecasts on the seasonal to subseasonal time scales, as well as addressing how climate change may influence severe thunderstorms. With its roots in studying weather that impacts the public, severe thunderstorm research now includes significant work from the social science community, some as standalone research and some in active collaborative efforts with physical scientists. In addition, the traditional emphases of the field continue to grow. Improved radar and numerical modeling capabilities allow meteorologists to see and model details that were unobservable and not understood a half century ago. The long tradition of collecting observations in the field has led to improved quality and quantity of observations, as well as the capability to collect them in locations that were previously inaccessible. Much of that work has been driven by the gaps in understanding identified by theoretical and operational practice.

Beschreibung: Remarkable progress has occurred over the last 100 years in our understanding of atmospheric chemical composition, stratospheric and tropospheric chemistry, urban air pollution, acid rain, and the formation of airborne particles from gas-phase chemistry. Much of this progress was associated with the developing understanding of the formation and role of ozone and of the oxides of nitrogen, NO and NO2, in the stratosphere and troposphere. The chemistry of the stratosphere, emerging from the pioneering work of Chapman in 1931, was followed by the discovery of catalytic ozone cycles, ozone destruction by chlorofluorocarbons, and the polar ozone holes, work honored by the 1995 Nobel Prize in Chemistry awarded to Crutzen, Rowland, and Molina. Foundations for the modern understanding of tropospheric chemistry were laid in the 1950s and 1960s, stimulated by the eye-stinging smog in Los Angeles. The importance of the hydroxyl (OH) radical and its relationship to the oxides of nitrogen (NO and NO2) emerged. The chemical processes leading to acid rain were elucidated. The atmosphere contains an immense number of gas-phase organic compounds, a result of emissions from plants and animals, natural and anthropogenic combustion processes, emissions from oceans, and from the atmospheric oxidation of organics emitted into the atmosphere. Organic atmospheric particulate matter arises largely as gas-phase organic compounds undergo oxidation to yield low-volatility products that condense into the particle phase. A hundred years ago, quantitative theories of chemical reaction rates were nonexistent. Today, comprehensive computer codes are available for performing detailed calculations of chemical reaction rates and mechanisms for atmospheric reactions. Understanding the future role of atmospheric chemistry in climate change and, in turn, the impact of climate change on atmospheric chemistry, will be critical to developing effective policies to protect the planet.

Beschreibung: The polar regions present several unique challenges to meteorology, including remoteness and a harsh environment. We summarize the evolution of polar meteorology in both hemispheres, beginning with measurements made during early expeditions and concluding with the recent decades in which polar meteorology has been central to global challenges such as the ozone hole, weather prediction, and climate change. Whereas the 1800s and early 1900s provided data from expeditions and only a few subarctic stations, the past 100 years have seen great advances in the observational network and corresponding understanding of the meteorology of the polar regions. For example, a persistent view in the early twentieth century was of an Arctic Ocean dominated by a permanent high pressure cell, a glacial anticyclone. With increased observations, by the 1950s it became apparent that, while anticyclones are a common feature of the Arctic circulation, cyclones are frequent and may be found anywhere in the Arctic. Technology has benefited polar meteorology through advances in instrumentation, especially autonomously operated instruments. Moreover, satellite remote sensing and computer models revolutionized polar meteorology. We highlight the four International Polar Years and several high-latitude field programs of recent decades. We also note outstanding challenges, which include understanding of the role of the Arctic in variations of midlatitude weather and climate, the ability to model surface energy exchanges over a changing Arctic Ocean, assessments of ongoing and future trends in extreme events in polar regions, and the role of internal variability in multiyear-to-decadal variations of polar climate.

Beschreibung: The human population on Earth has increased by a factor of 4.6 in the last 100 years and has become more centered in urban environments. This expansion and migration pattern has resulted in stresses on the environment. Meteorological applications have helped to understand and mitigate those stresses. This chapter describes several applications that enable the population to interact with the environment in more sustainable ways. The first topic treated is urbanization itself and the types of stresses exerted by population growth and its attendant growth in urban landscapes—buildings and pavement—and how they modify airflow and create a local climate. We describe environmental impacts of these changes and implications for the future. The growing population uses increasing amounts of energy. Traditional sources of energy have taxed the environment, but the increase in renewable energy has used the atmosphere and hydrosphere as its fuel. Utilizing these variable renewable resources requires meteorological information to operate electric systems efficiently and economically while providing reliable power and minimizing environmental impacts. The growing human population also pollutes the environment. Thus, understanding and modeling the transport and dispersion of atmospheric contaminants are important steps toward regulating the pollution and mitigating impacts. This chapter describes how weather information can help to make surface transportation more safe and efficient. It is explained how these applications naturally require transdisciplinary collaboration to address these challenges caused by the expanding population.

Beschreibung: The field of atmospheric science has been enhanced by its long-standing collaboration with entities with specific needs. This chapter and the two subsequent ones describe how applications have worked to advance the science at the same time that the science has served the needs of society. This chapter briefly reviews the synergy between the applications and advancing the science. It specifically describes progress in weather modification, aviation weather, and applications for security. Each of these applications has resulted in enhanced understanding of the physics and dynamics of the atmosphere, new and improved observing equipment, better models, and a push for greater computing power.

Beschreibung: Over the past century, the atmospheric and related sciences have seen incredible advances in our understanding of Earth’s environment and our ability to monitor and predict its behavior. These advances have had a profound impact on society and have been integrated into every aspect of daily life. The American Meteorological Society (AMS) has been instrumental in supporting these advances throughout its first 100 years of existence as a scientific and professional society serving the community of professionals in the atmospheric and related oceanic and hydrologic sciences. AMS has provided opportunities for researchers and practitioners to share their scientific findings and build fruitful collaborations to further the science and its application. Through strategic initiatives at key points in its history, AMS has pushed the science forward—highlighting areas ripe for development, creating frameworks for interdisciplinary interactions, and providing innovative approaches to the dissemination of research results. As a society made up of the scientific community and led by many of the most prominent scientists of their time, AMS has been able to respond to, and often anticipate, the needs of its community.

Beschreibung: Applied meteorology is an important and rapidly growing field. This chapter concludes the three-chapter series of this monograph describing how meteorological information can be used to serve society’s needs while at the same time advancing our understanding of the basics of the science. This chapter continues along the lines of Part II of this series by discussing ways that meteorological and climate information can help to improve the output of the agriculture and food-security sector. It also discusses how agriculture alters climate and its long-term implications. It finally pulls together several of the applications discussed by treating the food–energy–water nexus. The remaining topics of this chapter are those that are advancing rapidly with more opportunities for observation and needs for prediction. The study of space weather is advancing our understanding of how the barrage of particles from other planetary bodies in the solar system impacts Earth’s atmosphere. Our ability to predict wildland fires by coupling atmospheric and fire-behavior models is beginning to impact decision-support systems for firefighters. Last, we examine how artificial intelligence is changing the way we predict, emulate, and optimize our meteorological variables and its potential to amplify our capabilities. Many of these advances are directly due to the rapid increase in observational data and computer power. The applications reviewed in this series of chapters are not comprehensive, but they will whet the reader’s appetite for learning more about how meteorology can make a concrete impact on the world’s population by enhancing access to resources, preserving the environment, and feeding back into a better understanding how the pieces of the environmental system interact.

Beschreibung: Some of the advances of the past century in our understanding of the general circulation of the atmosphere are described, starting with a brief summary of some of the key developments from the first half of the twentieth century, but with a primary focus on the period beginning with the midcentury breakthrough in baroclinic instability and quasigeostrophic dynamics. In addition to baroclinic instability, topics touched upon include the following: stationary wave theory, the role played by the two-layer model, scaling arguments for the eddy heat flux, the subtlety of large-scale eddy momentum fluxes, the Eliassen–Palm flux and the transformed Eulerian mean formulation, the structure of storm tracks, and the controls on the Hadley cell.

Beschreibung: Over the last 100 years, boundary layer meteorology grew from the subject of mostly near-surface observations to a field encompassing diverse atmospheric boundary layers (ABLs) around the world. From the start, researchers drew from an ever-expanding set of disciplines—thermodynamics, soil and plant studies, fluid dynamics and turbulence, cloud microphysics, and aerosol studies. Research expanded upward to include the entire ABL in response to the need to know how particles and trace gases dispersed, and later how to represent the ABL in numerical models of weather and climate (starting in the 1970s–80s); taking advantage of the opportunities afforded by the development of large-eddy simulations (1970s), direct numerical simulations (1990s), and a host of instruments to sample the boundary layer in situ and remotely from the surface, the air, and space. Near-surface flux-profile relationships were developed rapidly between the 1940s and 1970s, when rapid progress shifted to the fair-weather convective boundary layer (CBL), though tropical CBL studies date back to the 1940s. In the 1980s, ABL research began to include the interaction of the ABL with the surface and clouds, the first ABL parameterization schemes emerged; and land surface and ocean surface model development blossomed. Research in subsequent decades has focused on more complex ABLs, often identified by shortcomings or uncertainties in weather and climate models, including the stable boundary layer, the Arctic boundary layer, cloudy boundary layers, and ABLs over heterogeneous surfaces (including cities). The paper closes with a brief summary, some lessons learned, and a look to the future.

Beschreibung: The development of the technologies of remote sensing of the ocean was initiated in the 1970s, while the ideas of observing the ocean from space were conceived in the late 1960s. The first global view from space revealed the expanse and complexity of the state of the ocean that had perplexed and inspired oceanographers ever since. This paper presents a glimpse of the vast progress made from ocean remote sensing in the past 50 years that has a profound impact on the ways we study the ocean in relation to weather and climate. The new view from space in conjunction with the deployment of an unprecedented amount of in situ observations of the ocean has led to a revolution in physical oceanography. The highlights of the achievement include the description and understanding of the global ocean circulation, the air–sea fluxes driving the coupled ocean–atmosphere system that is most prominently illustrated in the tropical oceans. The polar oceans are most sensitive to climate change with significant consequences, but owing to remoteness they were not accessible until the space age. Fundamental discoveries have been made on the evolution of the state of sea ice as well as the circulation of the ice-covered ocean. Many surprises emerged from the extraordinary accuracy and expanse of the space observations. Notable examples include the determination of the global mean sea level rise as well as the role of the deep ocean in tidal mixing and dissipation.

Beschreibung: A century ago, meteorologists regarded tropical cyclones as shallow vortices, extending upward only a few kilometers into the troposphere, and nothing was known about their physics save that convection was somehow involved. As recently as 1938, a major hurricane struck the densely populated northeastern United States with no warning whatsoever, killing hundreds. In the time since the American Meteorological Society was founded, however, tropical cyclone research blossomed into an endeavor of great breadth and depth, encompassing fields ranging from atmospheric and oceanic dynamics to biogeochemistry, and the precision and scope of forecasts and warnings have achieved a level of success that would have been regarded as impossible only a few decades ago. This chapter attempts to document the extraordinary progress in tropical cyclone research over the last century and to suggest some avenues for productive research over the next one.

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Electrochimica Acta, Volume 319〈/p〉 〈p〉Author(s): Subish John, Samba Siva Vadla, Somnath C. Roy〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉CuO is a narrow band gap 〈em〉p〈/em〉-type semiconducting material having a wide range of applications. However, it is quite challenging to obtain phase pure CuO nanostructures grown directly on Cu substrate as most of the synthesis techniques like thermal oxidation results in the formation of additional Cu〈sub〉2〈/sub〉O phase. In this work, we report the growth of CuO nanoflakes without the formation of Cu〈sub〉2〈/sub〉O by a facile two-step synthesis process which consist of electrochemical anodization of Cu foil followed by low-temperature hydrothermal treatment at 100 °C. The phase purity of the sample is confirmed through XRD, XPS, and HRTEM. Further, photocurrent response of the sample is evaluated, and a rapid thermal treatment was used to improve the photo-response without altering the phase and morphology of the CuO nanoflakes. Such a process at 400 °C for 10 s resulted in a high photocurrent density of −4.6 mAcm〈sup〉−2〈/sup〉 (at 0.05 V 〈em〉vs.〈/em〉 RHE under AM 1.5G conditions). Electrochemical impedance spectroscopy and Mott Schottky analysis shows the direct role of rapid thermal treatment in increasing the charge carrier density of the sample.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0013468619313337-fx1.jpg" width="500" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Electrochimica Acta, Volume 319〈/p〉 〈p〉Author(s): Cong Liu, Fenyun Yi, Dong Shu, Weixin Chen, Xiaoping Zhou, Zhenhua Zhu, Ronghua Zeng, Aimei Gao, Chun He, Xia Li〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Three-dimensional N/S co-doped succulent-like hierarchical carbon (3D NS-SHC) is synthesized by carbonization of a supramolecular cluster. In this supramolecular process, potassium citrate can act as a reliable carbon source, while the thiourea as a N/S source and then, two molecules gradually tend to generate a giant “all-in-one” precursor via hydrogen bonding verified by Independent Gradient Model (IGM) calculation. TEM and SEM images show the N/S co-doped carbon holds a novel 3D succulent-like hierarchical structure. For NS-SHC-8:8 sample, element mapping images display the uniform N/S atoms distribution. These distinct features can be related to the supramolecular polymerization which promotes in-situ N/S co-doping homogenously and conduces to build 3D structure. Typically, NS-SHC-8:8 electrode exhibits prominent specific capacitance (258.5 F g〈sup〉−1〈/sup〉 at 0.5 A g〈sup〉−1〈/sup〉) and excellent cycle stability (94.4% after 20000 cycles) in three-electrode system. Furthermore, an assembled quasi-solid state symmetric supercapacitor delivers good energy density (10.2 Wh kg〈sup〉−1〈/sup〉 at 250 W kg〈sup〉−1〈/sup〉) and steady cycle endurance (85.1% after 10000 cycles). These eximious behaviors of NS-SHC-8:8 are mainly attributed to (1) the uniform N/S atoms distribution and their synergistic effect, which brings extra Faradaic reaction to higher specific capacitance, (2) the charming 3D succulent-like hierarchical structure, which serves as a multifunctional reservoir that can accommodate the ion/charge and facilitate their migration to further promote the electrochemical performance. Above mentions suggest that this uniformly heteroatom-modified carbon material produced by supramolecular technique is promising for high-performance energy storage devices.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0013468619313283-fx1.jpg" width="296" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Electrochimica Acta, Volume 319〈/p〉 〈p〉Author(s): Arunprabaharan Subramanian, Mahadeo A. Mahadik, Jin-Woo Park, In Kwon Jeong, Hee-Suk Chung, Hyun Hwi Lee, Sun Hee Choi, Weon-Sik Chae, Jum Suk Jang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Herein, we report the surface treatment on Zr〈sup〉4+〈/sup〉/Al〈sup〉3+〈/sup〉 codoped α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉 photoanode for high-performance photoelectrochemical water splitting. A high-temperature quenching exhibits the Zr〈sup〉4+〈/sup〉/Al〈sup〉3+〈/sup〉 codoping in α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉 photoanode without damaging morphology. The presence of Zr〈sup〉4+〈/sup〉/Al〈sup〉3+〈/sup〉 codoping shows a cathodic shift in onset potential, but lack of increment in photocurrent reveals the major role of passivation and the minimum doping effect of aluminum. Additionally, CoO〈sub〉x〈/sub〉 cocatalyst exhibits increment in photocurrent with the greater cathodic shift in onset potential than the pristine α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉 nanorods. The CoO〈sub〉x〈/sub〉 surface-reworked Zr〈sup〉4+〈/sup〉/Al〈sup〉3+〈/sup〉 codoped α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉 photoanode displays the highest photocurrent of 1.5 mA/cm〈sup〉2〈/sup〉 at 1.23 V vs. RHE (76% increment over the pristine α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉) and 0.7 mA/cm〈sup〉2〈/sup〉 at 1.0 V vs. RHE (102% increment over the pristine α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉). The systematic characterization carried out using x-ray diffraction and scanning electron microscopy confirms that after Zr〈sup〉4+〈/sup〉/Al〈sup〉3+〈/sup〉 codoping, and surface treatment, the crystalline structure, and morphology of the photoanodes remains unchanged. X-ray photoelectron spectroscopy confirmed the existence of Zr〈sup〉4+〈/sup〉/Al〈sup〉3+〈/sup〉 codopants in the hematite nanostructure. The electrochemical properties of the photoanode suggest that Al〈sup〉3+〈/sup〉 and Zr〈sup〉4+〈/sup〉 codoping, as well as surface treatment with CoO〈sub〉x〈/sub〉, cocatalyst lowers charge transfer resistance across the FTO/hematite interface, and hematite/electrolyte interface. This designs not only lowers onset potential but also offers the blueprint for the development of an efficient catalyst for solar water oxidation.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉CoO〈sub〉x〈/sub〉 surface-reworked Zr〈sup〉4+〈/sup〉/Al〈sup〉3+〈/sup〉 codoped α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉 photoanode displays the 102% increment in PEC performance than pristine α-Fe〈sub〉2〈/sub〉O〈sub〉3〈/sub〉 at 1.0 V vs. RHE.〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0013468619312927-fx1.jpg" width="471" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: September 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - Proteins and Proteomics, Volume 1867, Issue 9〈/p〉 〈p〉Author(s): 〈/p〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - Biomembranes〈/p〉 〈p〉Author(s): Deo R. Singh, Christopher King, Matt Salotto, Kalina Hristova〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉EGFR is a receptor tyrosine kinase that plays a critical role in cell proliferation, differentiation, survival and migration. Its activating ligand, EGF, has long been believed to stabilize the EGFR dimer. Two research studies aimed at quantitative measurements of EGFR dimerization, however, have led to contradicting conclusions and have questioned this view. Given the controversy, here we sought to measure the dimerization of EGFR in the absence and in the presence of saturating EGF concentrations, and to tease out the effect of ligand on dimer stability, using a FRET-based quantitative method. Our measurements show that the dissociation constant is decreased ~150 times due to ligand binding, indicative of significant dimer stabilization. In addition, our measurements demonstrate that EGF binding induces a conformational change in the EGFR dimer.〈/p〉〈/div〉 〈/div〉 〈div xml:lang="en"〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0005273619301476-ga1.jpg" width="265" alt="Unlabelled Image" title="Unlabelled Image"〉〈/figure〉〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 3 September 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochemical and Biophysical Research Communications, Volume 516, Issue 4〈/p〉 〈p〉Author(s): Yanjie Hou, Tian Gong, Jiangtao Zhang, Xi Yang, Yurong Guo〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The thinned-young apple polysaccharides from three varieties were obtained by hot water extraction at 88 ̊C for 120 min. The compositional monosaccharides of the three polysaccharides were shown to be the same (xylose, mannose, galactose and glucose) and the molecular weights of the polysaccharides were in the range of 200–300 kDa. Compared with “Qinyang” and “Pinklady”, the polysaccharide from “Jinshiji” had the highest emulsifying capacity. Moreover, the variations in pH and cation ion concentrations had also a significant effect on the emulsifying properties of the extracted polysaccharides. At pH 2.0–4.0, the prepared emulsion had smaller droplet sizes than at higher pH values. Although the emulsion was stable at low concentrations of Na〈sup〉+〈/sup〉 and Ca〈sup〉2+〈/sup〉 ions, high concentrations of Na〈sup〉+〈/sup〉 and Ca〈sup〉2+〈/sup〉 led to significant destabilization of the emulsion. Conclusively, our results demonstrated the potential application of thinned-young apple polysaccharide as a natural polysaccharide emulsifying agent.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - Proteins and Proteomics〈/p〉 〈p〉Author(s): Martina Paumann-Page, Rupert Tscheliessnig, Benjamin Sevcnikar, Romy-Sophie Katz, Irene Schwartz, Stefan Hofbauer, Vera Pfanzagl, Paul G. Furtmüller, Christian Obinger〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Human peroxidasin 1 is a multidomain peroxidase situated in the basement membrane. The iron enzyme with covalently bound heme oxidizes bromide to hypobromous acid which facilitates the formation of distinct sulfilimine cross-links in the collagen IV network and therefore contributes to its mechanical stability. Additional to the catalytically active peroxidase domain peroxidasin comprises a leucine rich repeat domain, four Ig domains and a C-terminal von Willebrand factor type C module (VWC). Peroxidasin has been shown to form homotrimers involving two redox-sensitive cysteine residues and to undergo posttranslational C-terminal proteolytic cleavage. The present study on several recombinantly produced truncated peroxidasin variants showed that the VWC is not required for trimer formation whereas the alpha-helical linker region located between the peroxidase domain and the VWC is crucial for trimerization. Our data furthermore implies that peroxidasin oligomerization occurs intracellularly before C-terminal cleavage. For the first time we present overall solution structures of monomeric and trimeric truncated peroxidasin variants which were determined by rotary shadowing combined with transmission electron microscopy and by small-angle X-ray scattering (SAXS). A triangular arrangement of the peroxidase domains to each other within the homotrimer was revealed and this structure was confirmed by a model of trimeric peroxidase domains. Our SAXS data showed that the Ig domains are highly flexible and interact with the peroxidase domain and that within the homotrimer each alpha-helical linker region interacts with the respective adjacent peroxidase domain. The implications of our findings on the structure-function relationship of peroxidasin are discussed.〈/p〉〈/div〉 〈/div〉 〈div xml:lang="en"〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S1570963919301219-ga1.jpg" width="240" alt="Unlabelled Image" title="Unlabelled Image"〉〈/figure〉〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Marine Systems, Volume 199〈/p〉 〈p〉Author(s): Peisheng Huang, Kerry Trayler, Benya Wang, Amina Saeed, Carolyn E. Oldham, Brendan Busch, Matthew R. Hipsey〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Effective short- and long-term estuarine water quality management decisions require a holistic view of estuarine response to multiple stressors that may be achieved through the integration of numerical modelling and observed data. Such an approach has been developed for the Swan-Canning Estuary system, a eutrophic urban estuary in Western Australia under threat from nutrient enrichment and a drying climate. Numerical modelling was integrated with long-term monitoring to develop the system Swan-Canning Estuary Virtual Observatory (SCEVO), which has been used to facilitate water quality management and streamline prediction workflows of hindcast, forecast, and environmental response functions. The system is based on a validated 3D water quality model, integrated within a data management system and related environmental models. A machine-learning method to improve the patchy and time-lagged catchment inputs is also highlighted. This work has identified that the key challenge associated with estuarine water quality prediction is the capability to (1) simulate internal physical and biogeochemical processes at suitable spatial resolution to resolve the gradients along the freshwater-ocean continuum; and (2) transition from using routine monitoring data as the basis for management decisions to using a diverse and integrated set of data streams as the basis for real-time operational decisions. Recommendations for high-frequency monitoring to support water quality modelling and dynamic integration between numerical and observed data for improved forecasting are discussed.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: December 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Physics and Chemistry of Solids, Volume 135〈/p〉 〈p〉Author(s): Lamya H. Al-Wahaibi, Yusuf Sert, Fatih Ucun, Nora H. Al-Shaalan, Aisha Alsfouk, Ali A. El-Emam, Mustafa Karakaya〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉This research relates to the molecular structure, electronic properties and IR, Raman and XPS analyses of the potential chemotherapeutic agent namely, 5-(adamantan-1-yl)-〈em〉N〈/em〉-methyl-1,3,4-thiadiazol-2-amine. Another purpose is to explore the structural stabilities and consistencies and, to assess the stable interaction energy and intermolecular hydrogen bond geometry for its dimeric structure. The monomer and dimer optimizations of the molecule have been calculated by the DFT method using various functionals such as B3LYP, B3PW91, mPW1PW91 and M06-2X. Although the minimum energy optimization was calculated at the B3LYP functional, the BSSE-corrected and uncorrected interaction energies of the dimer structure were more effectively obtained with the M062X functional. This assured us a test of the efficiency of M06-Class functional calculations on intermolecular interactions of strongly bound systems. Additionally, the molecular docking study was done between our molecule (ligand) and the previously studied and known as cortisone reductase 11β-Hydroxysteroid dehydrogenase type 1 (receptor, 11-β-HSD1: PDB-2ILT).〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0022369718334346-fx1.jpg" width="455" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Quantitative Spectroscopy and Radiative Transfer〈/p〉 〈p〉Author(s): Adrian Doicu, Michael I. Mishchenko〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The problem of backscattering of light by a discrete random medium illuminated by an obliquely incident plane electromagnetic wave is considered. The analysis is performed in a linear-polarization basis and includes (i) a complete derivation of the cross reflection matrix for a layer with densely and sparsely distributed particles, (ii) the design of an approximate method for computing the ladder and cross reflection matrices in the case of a semi-infinite medium with a sparse distribution of particles, (iii) the derivation of the relations between the elements of the ladder and cross reflection matrices in the exact backscattering direction for dense and sparse media, and (iv) the development of practical algorithms for solving the underlying integral equations by the method of Picard iterations and the discrete ordinate method. Simulation results for particles with large size parameters are also presented.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: December 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Physics and Chemistry of Solids, Volume 135〈/p〉 〈p〉Author(s): Hongfang Jiu, Na Ren, Lixin Zhang, Qing Zhang, Yuying Gao, Yajuan Meng〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The flower-like ZnMn〈sub〉2〈/sub〉O〈sub〉4〈/sub〉 hollow microtubules were synthesized by a hydrothermal method and calcination method. The composition and morphology were characterized. The results showed that flower-like hollow microtubules were obtained through calcination treatment. The as-prepared ZnMn〈sub〉2〈/sub〉O〈sub〉4〈/sub〉 electrochemical properties of flower-like hollow microtubules anode material for lithium-ion batteries were investigated. The first charge and discharge capacity was measured at 2152/1263 mA h g〈sup〉−1〈/sup〉 when the current density at 400 mA g〈sup〉−1〈/sup〉. After 300 cycles, the capacity kept 515 mA h g〈sup〉−1〈/sup〉 corresponding to the coulombic efficiency of 99%, which exhibited preferable cycling performance. The stability of the structure has been shown by rate performance, which had been tested under different current density. The results suggest a promising application of the ZnMn〈sub〉2〈/sub〉O〈sub〉4〈/sub〉 as anode material for lithium-ion batteries.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0022369718333468-fx1.jpg" width="500" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: December 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Physics and Chemistry of Solids, Volume 135〈/p〉 〈p〉Author(s): Takahiro Iijima, Tadashi Shimizu, Atsushi Goto, Kenzo Deguchi, Toshihito Nakai, Ryutaro Ohashi, Masayoshi Saito〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In Ti-based Ziegler-Natta catalysts (ZNCs), disagreements exist concerning which lateral surface of the MgCl〈sub〉2〈/sub〉 support adsorbs Ti species so as to be an active site for the catalysis of polymerization. In the present paper, we investigated the local structure of TiCl〈sub〉4〈/sub〉 adsorbed onto the surface of MgCl〈sub〉2〈/sub〉 by 〈sup〉47,49〈/sup〉Ti solid-state nuclear magnetic resonance (NMR) spectra at 21.8 T along with density functional theory (DFT) calculations. The magic-angle-spinning NMR spectrum of the TiCl〈sub〉4〈/sub〉/MgCl〈sub〉2〈/sub〉 adduct sample prepared by 20 h of milling, which exhibited broadened and shifted peaks compared to that of the sample without milling, was simulated by a Czjzek model considering the distribution of quadrupole interaction parameters. The electric field gradient and chemical shielding tensors of 〈sup〉49〈/sup〉Ti were obtained via DFT calculations for model molecules of TiCl〈sub〉4〈/sub〉, 2TiCl〈sub〉4〈/sub〉, and Ti〈sub〉2〈/sub〉Cl〈sub〉8〈/sub〉 adsorbed onto the (110), (104), and (104)-step defect surfaces of MgCl〈sub〉2〈/sub〉. By comparing the obtained NMR parameters, the 〈sup〉47,49〈/sup〉Ti NMR spectrum of the milled sample was assigned to TiCl〈sub〉4〈/sub〉 adsorbed onto the (104) surface of MgCl〈sub〉2〈/sub〉, which may not be a principal component of adsorption.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S002236971930472X-fx1.jpg" width="380" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Marine Systems, Volume 199〈/p〉 〈p〉Author(s): Arseny A. Kubryakov, Alexander S. Mikaelyan, Sergey V. Stanichny〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉 〈p〉Bio-Argo measurements of the backscattering coefficient (〈em〉bbp〈/em〉) were used to investigate the time-depth evolution of coccolithophore blooms in the Black Sea. Five years of Bio-Argo data obtained in 2014–2018 revealed two distinct peaks of 〈em〉bbp〈/em〉 corresponding to the winter and early summer coccolithophore blooms. The latter started in the upper mixed layer (UML) in April–May and was characterized by the highest coccolithophore concentrations. During the most extensive summer bloom in 2017, its estimates reach 10 × 10〈sup〉6〈/sup〉 cells l〈sup〉−1〈/sup〉. The summer blooms occupied the UML (0–10 m) and a seasonal thermocline (10–30 m). The lower boundary of the bloom was related to the position of isopycnal 1014 kg m〈sup〉−3〈/sup〉, which deepens in May–July due to summer heating. Consequently, the coccolithophore bloom deepened to 20–30 m and terminated rapidly in July. Bloom termination was accompanied by a significant rise in light attenuation (〈em〉kd〈/em〉) in the sea basin. This peak was attributed to the release of dissolved organic carbon (DOC), which was possibly related to viral lysis and the exudation of lipids from coccolithophore cells. Data on the 〈em〉kd〈/em〉 was used to estimate the seasonal variability in DOC in the Black Sea. Maximal estimated values of DOC were observed at 15–35 m depth in June-August and coincided with the early summer coccolithophore bloom termination.〈/p〉 〈p〉The winter coccolithophore bloom started in October–November in the UML. The maximum 〈em〉bbp〈/em〉 was observed in January. High values of 〈em〉bbp〈/em〉 were observed down to a depth of 60 m during the maximal deepening of the mixed layer. The winter blooms were distinctly observed in MODIS satellite images, where they were characterized by high reflectance and relatively low chlorophyll concentrations. The estimated coccolithophore concentration in winter was lower than that in summer, but column-averaged 〈em〉bbp〈/em〉 values were comparable. The winter coccolithophore bloom reached a peak within one month after the autumn peak of chlorophyll A, indicating the possible importance of the nutrients recycled after the diatom autumn bloom. In contrast to summer, the maximum DOC observed at the surface preceded the winter coccolithophore bloom, and the mass DOC production was probably attributed to the excretion and lysis of the non-calcified phytoplankton cells.〈/p〉 〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Computational Physics〈/p〉 〈p〉Author(s): Maxim Rakhuba, Alexander Novikov, Ivan Oseledets〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Such problems as computation of spectra of spin chains and vibrational spectra of molecules can be written as 〈em〉high-dimensional eigenvalue problems〈/em〉, i.e., when the eigenvector can be naturally represented as a multidimensional tensor. Tensor methods have proven to be an efficient tool for the approximation of solutions of high-dimensional eigenvalue problems, however, their performance deteriorates quickly when the number of eigenstates to be computed increases. We address this issue by designing a new algorithm motivated by the ideas of 〈em〉Riemannian optimization〈/em〉 (optimization on smooth manifolds) for the approximation of multiple eigenstates in the 〈em〉tensor-train format〈/em〉, which is also known as matrix product state representation. The proposed algorithm is implemented in TensorFlow, which allows for both CPU and GPU parallelization.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Computational Physics〈/p〉 〈p〉Author(s): Chen Liu, Florian Frank, Faruk O. Alpak, Béatrice Rivière〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Permeability estimation of porous media from directly solving the Navier–Stokes equations has a wide spectrum of applications in petroleum industry. In this paper, we utilize a pressure-correction projection algorithm in conjunction with the interior penalty discontinuous Galerkin scheme for space discretization to build an incompressible Navier–Stokes simulator and to use this simulator to calculate permeability of real rock samples. The proposed method is accurate, numerically robust, and exhibits the potential for tackling realistic problems.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Marine Systems, Volume 199〈/p〉 〈p〉Author(s): Yuanyi Li, Huan Feng, Haiwen Zhang, Jian Sun, Dekui Yuan, Lei Guo, Jing Nie, Jinglong Du〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The time required for water exchange characterizes the hydrodynamic condition of a water body, which is related to its self-purification ability. In this study, a numerical model based on a three-dimensional hydrodynamic model is established and implemented to calculate the age of water. Using the model, the spatial distribution and seasonal variation of the age of the water discharged into the New York/New Jersey (NY/NJ) Harbor from the Passaic River and the Hackensack River are calculated. The hydrodynamic conditions and the characteristics of water exchange in the harbor are analyzed from the perspective of age. The results indicate that the monthly-averaged age at the entrance of the NY/NJ Harbor is approximately 26 days and 40 days during the wet season and the dry season, respectively. River discharge has a significant impact on the spatial distribution of water age in the NY/NJ Harbor. Generally, high river discharge results in better water exchange and flushes contaminants out of the harbor quickly. However, discharges from several rivers flowing into the harbor interact and interfere with one another. Such interactions can improve or inhibit water and contaminant flushing from the harbor. The analysis of age variations and residual flows indicates that the Kill van Kull is one of the key channels controlling the contaminant transport and water quality in the Newark Bay. This study demonstrates the advantages of using water age to study the water exchange and physical self-purification ability of this complex harbor.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Computational Physics〈/p〉 〈p〉Author(s): Mustapha Malek, Nouh Izem, M. Shadi Mohamed, Mohammed Seaid, Omar Laghrouche〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉An efficient partition of unity finite element method for three-dimensional transient diffusion problems is presented. A class of multiple exponential functions independent of time variable is proposed to enrich the finite element approximations. As a consequence of this procedure, the associated matrix for the linear system is evaluated once at the first time step and the solution is obtained at subsequent time step by only updating the right-hand side of the linear system. This results in an efficient numerical solver for transient diffusion equations in three space dimensions. Compared to the conventional finite element methods with 〈em〉h〈/em〉-refinement, the proposed approach is simple, more efficient and more accurate. The performance of the proposed method is assessed using several test examples for transient diffusion in three space dimensions. We present numerical results for a transient diffusion equation with known analytical solution to quantify errors for the new method. We also solve time-dependent diffusion problems in complex geometries. We compare the results obtained using the partition of unity finite element method to those obtained using the standard finite element method. It is shown that the proposed method strongly reduces the necessary number of degrees of freedom to achieve a prescribed accuracy.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Computational Physics〈/p〉 〈p〉Author(s): Lahbib Bourhrara〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉This document presents a new numerical scheme dealing with the Boltzmann transport equation. This scheme is based on the expansion of the angular flux in a truncated spherical harmonics function and the discontinuous finite element method for the spatial variable. The advantage of this scheme lies in the fact that we can deal with unstructured, non-conformal and curved meshes. Indeed, it is possible to deal with distorted regions whose boundary is constituted by edges that can be either line segments or circular arcs or circles. In this document, we detail the derivation of the method for 2D geometries. However, the generalization to 2D extruded geometries is trivial.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: Available online 8 July 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Icarus〈/p〉 〈p〉Author(s): Kandis-Lea Jessup, Emmanuel Marcq, Jean-Loup Bertaux, Franklin P. Mills, Sanjay Limaye, Anthony Roman〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Hubble Space Telescope Imaging Spectrograph (HST/STIS) observations were obtained on 3 dates in December 2010 and January 2011 recording the cloud top properties over Aphrodite Terra and a low elevation region downwind of Aphrodite through LSTs extending from 7 to 11 a.m. From these data we trace the cloud top sulfur-oxide chemistry and UV albedo sensitivity to LST, latitude and topography. Above regions co-located in LST and latitude, albedo variations observed at 245 nm parallel those observed at 365 nm-following the pattern expected from Hadley cell circulation. However, darkening of the cloud top albedo at LSTs between 9.5 and 11 h beyond that expected from simple Hadley circulation was also observed. Above the plains the albedo darkening intensified rapidly with LST and was observed at latitudes extending as high as ~30 N; however, above the mountains the darkening was either entirely absent or evident only at 0 N at an intensity 2× lower than that observed over the plains. Because the observed 245 nm albedo LST variations were inconsistent with that expected from multiple scattering of the coincidently retrieved SO〈sub〉2〈/sub〉 gas abundance, we conclude that the 245 nm albedo is diagnostic of the vertical and spatial distribution, abundance (and potentially the identity) of Venus' unidentified UV absorber—rather than SO〈sub〉2〈/sub〉 gas. The LST albedo trends are best explained by the onset of subsolar convective activity that intensifies with LST expanding vertically from the boundary between the middle and upper clouds to the cloud tops and increasing the detectability of the unknown absorbing species at the cloud tops. The terrain dependence in the observed intensity implies the time at which the expansion reaches the cloud tops is later above the mountains than over the plains. Additionally, at the time of observation, the low-latitude large-scale vertical mixing rates that control the latitudinal gradients of the SO〈sub〉2〈/sub〉 and unknown absorber abundances above and within the cloud top region were lower over Aphrodite Terra than the plains, to the extent that photochemical processing destroyed the spatial correlation between those absorbing species. These observations show the power of UV spectroscopy to diagnose the distinct influences of deep (Hadley-cell type) and shallow convective mixing processes on the vertical and horizontal distribution of Venus' unknown absorbing species, and the sensitivity of these processes to LST and topography, relative to the sulfur oxide chemistry. These results are essential for accurate climate modeling—and when compared to recent Venus missions motivate a need for additional follow-on observing campaigns that simultaneously trace key cloud top chemistry and dynamic processes including the LST dependent evolution of planetary scale gravity waves (GWs). With the inevitable aging of the Hubble Telescope, follow-on observations providing temporally coincident traces of the cloud top albedo, sulfur-oxide chemistry and GW features will require a new age of space-based telescopes and Venus orbiting mission with sensitivity to UV, visible and IR wavelengths.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Solid State Ionics, Volume 340〈/p〉 〈p〉Author(s): Ananda Shastri, Deborah Watson, Qing-Ping Ding, Yuji Furukawa, Steve W. Martin〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉〈sup〉23〈/sup〉Na NMR spin lattice relaxation times, T〈sub〉1〈/sub〉, and central linewidths were obtained for yNa〈sub〉2〈/sub〉S + (1 − y)[xSiS〈sub〉2〈/sub〉 + (1 − x)PS〈sub〉5/2〈/sub〉] glassy solid electrolytes for two series of glasses, y = 0.5 and 0.67, and x = 0.1, 0.3, 0.5, 0.7, and 0.9. No pronounced mixed glass former effect in the activation energy was observed within experimental uncertainty for either series of glasses. Energy barriers to sodium motion were calculated using the Anderson-Stuart model for the y = 0.67 sample, and the results suggested that the energy barriers as a function of composition are strongly influenced by the dielectric constant of these glasses. DC Na〈sup〉+〈/sup〉 ion conductivity values calculated using NMR-derived correlation times, an available Na〈sup〉+〈/sup〉 ion site coordination number in the range z = 3–4, and an energy cutoff determined from the critical percolation threshold, were in agreement with the increasing trend in the experimental values for the y = 0.67 glasses. Using the same model, the conductivity values were calculated for the y = 0.50 glasses, which have as yet to be measured, and these revealed a decreasing conductivity as x increased. Sodium NMR second moment studies showed that the cation spatial arrangement followed a homogeneous distribution for y = 0.50 and 0.67 samples over most of the composition range, but deviated significantly away from this above a sodium concentration of 1.85 × 10〈sup〉28〈/sup〉 m〈sup〉-3〈/sup〉, suggesting a tendency for sodium to cluster under these conditions.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Agriculture, Ecosystems & Environment, Volume 283〈/p〉 〈p〉Author(s): 〈/p〉

Beschreibung: 〈p〉Publication date: 1 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Solid State Ionics, Volume 340〈/p〉 〈p〉Author(s): Shyamal K. Das, Thangavelu Palaniselvam, Philipp Adelhelm〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The renewal of research interest in rechargeable aluminum-ion batteries could be seen as a massive boost for the exploration of Al〈sup〉3+〈/sup〉-ion electroactive electrode materials in recent times. Titanium dioxide (TiO〈sub〉2〈/sub〉) is less explored but could be a promising electrode material for aluminum-ion battery. Here, we demonstrate the rechargeability of an Al-ion cell with anatase TiO〈sub〉2〈/sub〉 as cathode in chloroaluminate ionic liquid electrolyte. The Al-TiO〈sub〉2〈/sub〉 cell exhibited excellent long-term stability with maximum specific capacity of 25 mAh g〈sup〉−〈/sup〉〈sup〉1〈/sup〉 at current rate of 500 mA g〈sup〉−〈/sup〉〈sup〉1〈/sup〉 at room temperature. The electroactive nature of TiO〈sub〉2〈/sub〉 in the chloroaluminate electrolyte is clearly demonstrated both by cyclic voltammetry and galvanostatic cycling studies. The synergistic effect of current collector in improving the long-term stability of Al-TiO〈sub〉2〈/sub〉 cell is also revealed.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Ocean Modelling, Volume 140〈/p〉 〈p〉Author(s): Oleg Druzhinin, Yuliya Troitskaya, Wu-ting Tsai, Po-chen Chen〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The present study is concerned with direct numerical simulation (DNS) of turbulent air flow over a waved water surface. Three-dimensional, turbulent Couette flow is considered in DNS as a model of a constant-flux layer in the marine atmospheric surface layer. Two-dimensional stationary waves at the water surface are prescribed and assumed to be unaffected by the air-flow. We consider capillary-gravity water surface waves and are interested in the influence of “parasitic” capillary ripples riding on the carrier, energy-containing waves, on the properties of the air-flow. The surface waves are prescribed and considered to be stationary, the capillaries being in phase with the carrier wave. The surface elevations spectra are also prescribed and mimicking stationary capillaries riding on Stokes waves observed in a 2D numerical simulation of water-surface capillary-gravity waves by Hung & Tsai (2009). The bulk air velocity and the carrier water surface waves lengths are considered in our DNS in the range of 3 to 5 m/s and 3 to 7 cm, respectively. Under these conditions, the capillaries are found to be submerged within the viscous sublayer of the atmospheric boundary layer. Our DNS results show that although the flow fields are characterized by instantaneous separations of the boundary layer, the ensemble (wave-phase) averaged flow fields are non-separating and well predicted by a quasilinear theoretical model. We find also that capillaries mitigate the development of coherent (horse-shoe) vortex structures as compared to the no-ripples flow-case. We further use DNS results and quasilinear model formulation to parameterize the water surface roughness height in terms of critical layer thickness and the amplitude of a dominant, energy-containing harmonic of the water surface elevation spectrum.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Hiral D. Shah, J.A. Bhalodia〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this communication, we report the structural and electrical transport properties of (1-〈em〉x〈/em〉) La〈sub〉0.7〈/sub〉Sr〈sub〉0.3〈/sub〉Mn〈sub〉0.95〈/sub〉Co〈sub〉0.05〈/sub〉O〈sub〉3〈/sub〉 (LSMCO) + (〈em〉x〈/em〉) ZnO (〈em〉x〈/em〉 = 0%, 6%, 9%, 12%, 15% & 18%) composites. For the preparation of (1-〈em〉x〈/em〉) LSMCO + (〈em〉x〈/em〉) ZnO (〈em〉x〈/em〉 = 6%, 9%, 12%, 15% & 18%) composites, sample of LSMCO was prepared by the auto combustion technique/inexpensive modified sol-gel technique. The results of Rietveld refined XRD data show that LSMCO sample possesses a rhombohedral structure with the 〈em〉R-3c〈/em〉 space group whereas ZnO compound remains with hexagonal structure with the 〈em〉P6〈/em〉〈sub〉〈em〉3〈/em〉〈/sub〉〈em〉mc〈/em〉 space group in all the composite samples. The X-ray diffraction (XRD) and scanning electron microscopy (SEM) show that no any extra unwanted phase was observed in each composite excluding the LSMCO and ZnO phases. ZnO is mostly distributed at the grain boundaries and on the surface of the LSMCO grains. Elemental presence and ratio was confirmed through the EDX analysis. The electrical resistivity of LSMCO and each composite was measured in the temperature range of 2 K–320 K at 0 Oe, 10 kOe, 50 kOe & 90 kOe magnetic field. The results indicate that the ZnO addition increases the resistivity of all the composites compare to that of pure LSMCO. The electrical resistivity explored by the theoretical model below 〈em〉T〈/em〉〈sub〉MI〈/sub〉 and fitting enlightenment for the observed behavior is transmitted here in detail.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Dezhi Yang, Weihua Liu, Dingfu Cheng, Jieshi Chen, Hao Lu, Chun Yu, Jijin Xu〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉(Co, Cr)23C6 type carbide is a typical metallic compound in many cobalt bearing alloys, and it acts as the strengthening phase in the form of bulk eutectic carbides or precipitated carbides. In this work, first-principles calculations were carried out to investigate the electronic structure, phase stability, mechanical and magnetic properties of (Co, Cr)23C6 with different cobalt occupation. Some of the calculated values are compared with previous studies and, they are found to be in a good agreement. The method considering curvature radius is firstly used to describe the degree of anisotropy. The hardness calculated through elastic constants presents an approximate downtrend with the cobalt concentration. Analysis of the density of states (DOS), overlapped population and electron density maps, indicates that the bonds in (Co, Cr)23C6 are the mixture of covalent, ionic and metallic bonds, the interactions of 〈em〉d-d〈/em〉 orbits between metallic atoms contribute most to the hybridization mode. According to the population analysis, the reduction in hardness can attribute to the increase of metallicity and iconicity of the interacted metallic atoms. In addition, the formation of a large quantity of antibonding also plays a negative role in intrinsic hardness of (Co, Cr)23C6 when massive substitution of cobalt atom.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Morteza Alizadeh, Andisheh Shakery, Erfan Salahinejad〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this research, the structure and mechanical properties of 1050 aluminum strips reinforced with E-glass fibers, processed by the cross accumulative roll bonding (CARB) process, were investigated from microscopic, hardness, tensile and peeling viewpoints. The results indicated that the incorporation of the glass fibers in the Al matrix increases strength and micro-hardness but decreases elongation. In addition, it was realized that some of these fibers are broken and changed to short fibers during the CARB process. The presence of the glass fibers strongly also reduces the bond efficiency of the Al strips, typically from 50% to 5%. To compensate this deleterious effect, it was found that at least 25% should be increased to the normal thickness reduction used in CRAB.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Soil Dynamics and Earthquake Engineering, Volume 125〈/p〉 〈p〉Author(s): Ahmet Hilmi Deringöl, Esra Mete Güneyisi〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉This study investigates the influence of the friction pendulum bearing (FPB) isolator characteristics on the nonlinear response of the buildings under various seismic excitations. To represent a wide range of assessment, 3, 6, and 9-storey steel framed buildings with twenty seven different isolation models of FPB were studied by identifying the local and global deformations. Three important parameters such as isolation period T (as 2, 2.5, and 3 s), effective damping ratio ß (as 0.05, 0.15, 0.25), and yield strength ratio Fy/W (as 0.025, 0.05, and 0.10) were used in the modelling of FPB. Two-dimensional model of the base-isolated steel frames were created and the nonlinear time history analysis was performed through a number of earthquake ground motions. The behaviour of the isolated frames was measured by the variation of isolator displacement, roof drift ratio, relative displacement, interstorey drift ratio, absolute acceleration, base shear, base moment, hysteretic curve, and dissipated energy. The benefits obtained through the adoption of the base isolation system were discussed. It was found that the seismic response of the base-isolated frames could be estimated accurately by adjusting the proper isolation period, yield strength ratio, and effective damping ratio for the case studied structures.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Soil Dynamics and Earthquake Engineering, Volume 125〈/p〉 〈p〉Author(s): Jinbao Yao, Rutao Zhao, Nan Zhang, Dujuan Yang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉 〈p〉An in-filled trench barrier is usually used to reduce the damages from train-induced environmental vibrations. To find the vibration isolation effect of an in-filled trench barrier, this paper analyses the reflection coefficients and transmission coefficients of the Rayleigh wave at the interface between in-filled trenches and the soil. In our calculation formulas of ground vibrations, a single point and a single frequency excitation, as well as multi-point and multi-frequency excitation, are simultaneously derived in a soil-in-filled-trench system.〈/p〉 〈p〉Using these formulas and a numerical analysis, the effects of an in-filled trench barrier on the environmental vibrations induced by running trains are analyzed. The results show that the reflection coefficients increase, while the transmission coefficients decrease, with the density and elastic modulus of the in-filled material. The vibration isolation effect is clearly better than that without trenches. In a certain width range, the transmission coefficient and vertical acceleration levels decrease with the increase of trench width. The influences of the transmission coefficient and the vibration isolation effects are not clear with the trenches’ depth variation. The vertical vibrations of the ground pick-up point are all smaller than those without in-filled trenches.〈/p〉 〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: September 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Soil Dynamics and Earthquake Engineering, Volume 124〈/p〉 〈p〉Author(s): 〈/p〉

Beschreibung: 〈p〉Publication date: October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Soil Dynamics and Earthquake Engineering, Volume 125〈/p〉 〈p〉Author(s): Benshun Shao, Stephen A. Mahin, Victor Zayas〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉By interpreting the seismic responses of two seismically isolated low-rise case-study buildings probabilistically using FEMA P695 methodology, the study indicates for the design of seismically isolated structures, providing isolator capacities equal to risk-targeted maximum considered earthquake (MCE〈sub〉R〈/sub〉) demand does not achieve targeted levels of reliability specified in ASCE 7–16. To do so, isolation system capacities beyond average MCE〈sub〉R〈/sub〉 demand are required. The minimum required capacities for using three types of enhanced isolation system (isolator without displacement restraint, isolator combined with external hard-stopping mechanism, and isolator with internal stiffening behavior at large horizontal displacement) are calculated with nonlinear response history analysis following probabilistic framework for different design risk categories numerically. The results indicate that isolator displacement capacities ranging from 1.5 to 2.60 times the average MCE〈sub〉R〈/sub〉 demand and isolation system shear capacities ranging from 1.5 to 5 times the average MCE〈sub〉R〈/sub〉 demand are required, depending on seismic risk categories and isolation system types. The use of an isolator with internal stiffening behavior is an efficient option to provide the required capacities for achieving reliability goals, especially for high risk-category design.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Electrochimica Acta, Volume 319〈/p〉 〈p〉Author(s): Jeonghoon Han, Changwoo Bae, Songhwa Chae, Dukhyun Choi, Sangmin Lee, Youngsuk Nam, Choongyeop Lee〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Here we introduce the new approach to high-efficiency power generation from a salinity difference using conventional nanoporous Nafion membrane. When access areas on each side of nanoporous Nafion membrane are set to be asymmetric, the ratio of ionic current upon a voltage bias of the different polarity also becomes asymmetric, resulting in ionic diode phenomena. When this geometrical ionic diode effect is combined with a salinity gradient, it can help significantly improve the energy conversion efficiency from a salinity difference even under a hyper-saline environment with a large salinity difference, e.g. ∼41% conversion efficiency and ∼120 nW power generation with 1 M KCl and 1000-fold salinity difference, both of which are comparable with the best performances reported in the previous studies. We propose that the decrease in ion concentration polarization at a low salt concentration side is responsible for the enhanced power generation with the membrane having asymmetric access areas. Our approach is simple to implement and can be applicable to any nanoporous membrane to enhance the power generation from a salinity difference.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Electrochimica Acta, Volume 319〈/p〉 〈p〉Author(s): Jialun Chen, Ping Tong, Lingting Huang, Zhonghua Yu, Dianping Tang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉An interdigitated capacitance immunosensing system based enzymatic biocatalytic precipitation on micro-comb electrode was designed for the sensitive detection of prostate-specific antigen (PSA) by coupling Ti〈sub〉3〈/sub〉C〈sub〉2〈/sub〉 MXenes with tyramine signal amplification strategy. The immunosensor was prepared by immobilizing anti-PSA capture antibody on MXenes-coated interdigitated electrode, whereas gold nanoparticles heavily functionalized with horseradish peroxidase (HRP) and detection antibody were utilized as the signal-transducer tags. Introduction of interdigitated electrode was expected to enhance the sensitivity of capacitance immunosensor. This system mainly consisted of the sandwich-type immunoreaction, formation of tyramine-HRP repeats on gold nanoparticle and enzymatic biocatalytic precipitation. The concatenated HRP through the tyramine oxidized numerous 4-chloro-1-naphthol molecules into insoluble benzo-4-chlorohexadienone with the help of H〈sub〉2〈/sub〉O〈sub〉2〈/sub〉, and coated the modified immunosensor to keep free ions away from the electrode, thus causing the local alteration in the capacitance. Under optimum conditions, the change of the immunosensor in the capacitance increased with the increasing target PSA concentrations from 0.1 ng mL〈sup〉−1〈/sup〉 to 50 ng mL〈sup〉−1〈/sup〉 at a detection limit of 0.031 ng mL〈sup〉−1〈/sup〉. Moreover, the interdigitated capacitance immunosensor showed good reproducibility, high specificity and acceptable accuracy for the analysis of human serum specimens in comparison with those obtained from commercial human PSA ELISA kit. Importantly, Ti〈sub〉3〈/sub〉C〈sub〉2〈/sub〉 MXenes-based interdigitated capacitance transducer open new opportunities for protein diagnostics and biosecurity.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Electrochimica Acta, Volume 319〈/p〉 〈p〉Author(s): Zhixu Jian, Honglei Li, Rui Cao, Heliang Zhou, Huaizhe Xu, Guangjin Zhao, Yalan Xing, Shichao Zhang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Confining the dissolution and diffusion of polysulfide is considered a key factor in the realization of high-performance lithium-sulfur battery. Here, we report a polydopamine (pDA) coated sulfur-carbon composite with a unique hierarchical tower-like structure (S-HTC@pDA) for lithium sulfur cathode. The internal layer by layer structure is capable of uniformly dispersing of sulfur, providing a continuous electronic conductive path and shortening the Li〈sup〉+〈/sup〉 transport distance, while the external pDA coating can inhibit the diffusion of polysulfide. Benefited from the smart design, the S-HTC@pDA electrode achieved an excellent cycling stability, realizing a high discharge capacity of 916 mAh g〈sup〉−1〈/sup〉 at the first cycle and a capacity retention of 79.4% after 500 cycles at 1 C. Therefore, this work provides a new concept in structure design for high performance lithium sulfur cathodes.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉Here, we report a polydopamine (pDA) coated sulfur-carbon composite with a unique hierarchical tower-like structure (S-HTC@pDA) for lithium sulfur cathode. The internal layer by layer structure is capable of uniformly dispersing of sulfur, providing a continuous electronic conductive path and shortening the Li〈sup〉+〈/sup〉 transport distance, while the external pDA coating can inhibit the diffusion of polysulfide.〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0013468619312885-fx1.jpg" width="326" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Forest Ecology and Management, Volume 449〈/p〉 〈p〉Author(s): Yili Guo, Han Y.H. Chen, Azim U. Mallik, Bin Wang, Dongxing Li, Wusheng Xiang, Xiankun Li〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Litterfall production is a major contributor to ecosystem net primary productivity and biogeochemical cycles. However, how various abiotic and biotic drivers influence litterfall production in heterogeneous natural forests is still debated. We used structural equation models (SEM) to test the direct and indirect effects of tree species diversity, tree diameter variation, stand basal area, and abiotic drivers (canopy exposure, elevation, slope, convexity, aspect, topographic wetness index and altitude above channel) on annual litterfall production in a heterogeneous tropical karst seasonal rainforest in Southern China. The SEM with tree species diversity, tree diameter variation, stand basal area, and abiotic drivers accounted for 43.4% of the variation in annual litterfall production. Tree species diversity and stand basal area had positive direct effects, while tree diameter variation had a negative direct effect on annual litterfall production. Tree species diversity had no significant effect on tree diameter variation nor stand basal area. Both annual litterfall production and tree species diversity decreased directly with water availability, while canopy exposure positively affected annual litterfall production but not tree species diversity. Our results indicate that the positive relationship between tree species diversity and litterfall production did not result from the effects of species diversity on canopy packing; instead, it appears that increasing soil water availability simultaneously reduce tree species diversity and annual litterfall production in the tropical karst seasonal rainforest.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Solar Energy, Volume 188〈/p〉 〈p〉Author(s): Naser Abdi, Yaser Abdi, Zahra Alemipour〈/p〉

Beschreibung: 〈p〉Publication date: 1 November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Geoderma, Volume 353〈/p〉 〈p〉Author(s): Jingzhe Wang, Jianli Ding, Danlin Yu, Xuankai Ma, Zipeng Zhang, Xiangyu Ge, Dexiong Teng, Xiaohang Li, Jing Liang, Ivan Lizaga, Xiangyue Chen, Lin Yuan, Yahui Guo〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Soil salinization is one of the most important causes for land degradation and desertification and is an important threat to land management, farming activities, water quality, and sustainable development in arid and semi-arid areas. Soil salinization is often characterized with significant spatiotemporal dynamics. The salt-affected soil is predominant in the Ebinur Lake region in the Northwestern China. However, detailed local soil salinity information is ambiguous at the best due to limited monitoring techniques. Nowadays, the availability of Multi-Spectral Instrument (MSI) onboard Sentinel-2, offers unprecedented perspectives for the monitoring and mapping of soil salinity. The use of MSI data is an innovative attempt for salinity detection in arid land. We hypothesize that field observations and MSI data and MSI data-derived spectral indices using the partial least square regression (PLSR) approach will yield fairly accurate regional salinity map. Based on electrical conductivity of 1:5 soil:water extract (EC) of 72 ground-truth measurements (out of 116 sample sites) and various spectral parameters, such as satellite band reflectance, published satellite salinity indices, red-edge indices, newly constructed two-band indices, and three-band indices from MSI data, we built a few inversion models in an attempt to produce the regional salinity maps. Different algorithms including Pearson correlation coefficient method (PCC), variable importance in projection (VIP), Gray relational analysis (GRA), and random forest (RF) were applied for variable selection. The results suggest that both the newly proposed normalized difference index (NDI) [(B12 − B7) / (B12 + B7)] and three-band index (TBI4) [(B12 − B3) / (B3 − B11)] show a better correlation with validation data and could be applied to estimate the soil salinity in the Ebinur Lake region. The established models were validated using the remaining 44 independent ground-based measurements. The RF-PLSR model performed the best across the five models with R〈sup〉2〈/sup〉〈sub〉V〈/sub〉, RMSE〈sub〉V〈/sub〉, and RPD of 0.92, 7.58 dS m〈sup〉−1〈/sup〉, and 2.36, respectively. The result from this model was then used to map the soil salinity over the study area. Our analyses suggest that soil salinization changes quite significantly in different seasons. Specifically, soil salinity in the dry season was higher than in the wet season, mostly in the lake area and nearby shores. We contend that the results from the study will be useful for soil salinization monitoring and land reclamation in arid or semi-arid regions outside the current study area.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Applied Geophysics, Volume 169〈/p〉 〈p〉Author(s): Zhiqu Lu, Glenn V. Wilson, Mark W. Shankle〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉For soil exploration in the vadose zone, a high-frequency multi-channel analysis of surface waves (HF-MASW) method with three enhanced techniques has been developed. In this paper, we apply this enhanced HF-MASW method to re-process field testing data that were collected over the past several years on five different sites. These sites are selected for their different soil properties and data acquisition configurations. The derived overtone images, extracted dispersion curves, and inverted soil profiles of these soil sites are shown and discussed. Penetration tests were conducted and comparisons are made between the soil profiles taken from the HF-MASW tests and those from the penetration tests. One of the objectives of the paper is to determine the optimal data acquisition parameters, including the source parameters and sensor array geometric configuration through the discussions of these case studies. Practical concerns of the HF-MASW method and lessons learnt from these tests are addressed. Recommendations for data acquisition, signal processing, and inversion are provided.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Solar Energy, Volume 188〈/p〉 〈p〉Author(s): Smajil Halilovic, Jamie M. Bright, Wiebke Herzberg, Sven Killinger〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Knowledge of horizontal solar irradiance is crucial for the nowcasting and forecasting of generated photovoltaic (PV) power. High quality irradiance measurement devices, however, are typically not collocated with PV systems. The lack of measurements can be compensated by numerical weather models or satellite-derived products, but they provide only limited temporal and spatial resolutions. Another possibility is to directly use PV systems as irradiance sensors, since the measured PV power is a good indicator of incoming solar irradiance. The challenging part in this procedure is the computation of the global horizontal irradiance 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si233.svg"〉〈mrow〉〈msub〉〈mrow〉〈mi〉G〈/mi〉〈/mrow〉〈mrow〉〈mi〉h〈/mi〉〈/mrow〉〈/msub〉〈/mrow〉〈/math〉 from the global tilted irradiance 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si234.svg"〉〈mrow〉〈msub〉〈mrow〉〈mi〉G〈/mi〉〈/mrow〉〈mrow〉〈mi〉c〈/mi〉〈/mrow〉〈/msub〉〈/mrow〉〈/math〉, because a combination of decomposition and transposition models is not analytically invertible. Hence, the majority of existing solutions to this problem are numerical procedures. In this paper, an analytical approach to compute 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si235.svg"〉〈mrow〉〈msub〉〈mrow〉〈mi〉G〈/mi〉〈/mrow〉〈mrow〉〈mi〉h〈/mi〉〈/mrow〉〈/msub〉〈/mrow〉〈/math〉 from 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si236.svg"〉〈mrow〉〈msub〉〈mrow〉〈mi〉G〈/mi〉〈/mrow〉〈mrow〉〈mi〉c〈/mi〉〈/mrow〉〈/msub〉〈/mrow〉〈/math〉 is presented. The comparison of the proposed approach with one of the existing iterative (numerical) approaches shows promising results. When applied to 1-min data at four different locations, the new approach outperforms the iterative procedure by up to 9% in terms of the relative root mean square error (rRMSE) for east/west module’s orientations, and performs slightly better with the south orientation. Moreover, the new approach provides results in less than 1 s, whereas the iterative procedure requires more than 20 min for a one year of data. An open source R-script of the new approach is also publicly available and provided as supplementary material.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Crystal Growth, Volume 523〈/p〉 〈p〉Author(s): Yuichiro Hayashi, Takeshi Mitani, Naoyoshi Komatsu, Tomohisa Kato, Hajime Okumura〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉We investigated the surface roughening in 4H-SiC solution growth from the following two aspects: the roughening of the seed surface before seeding and the roughening caused by the adhesion of SiC particles during growth. First, we investigated the morphological changes of the seed surface before and after the melt-back process. The seed surface just before seeding was covered with macrosteps and 6H-SiC hillocks with a height of several micrometers. This surface roughening was caused by condensation of droplets of vaporized solvent on the seed surface. We found that the 6H-SiC hillocks were the origins of trench defects. The melt-back process completely removed the hillocks and produced a smooth surface adequate for successive bulk growth. Second, we investigated surface roughening caused by the formation of SiC particles. The adhesion of SiC particles on the growth surface introduced trench defects and polytype inclusions. The adhesion of SiC particles was suppressed by controlling the distribution of carbon supersaturation in the solvent.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Applied Geophysics, Volume 169〈/p〉 〈p〉Author(s): Rakoto Heritiana A., Rajaomahefasoa Riva, Razafiarisera Ralay, Razafindrakoto Boni〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉 〈p〉Multiple electrical geophysical survey techniques were used to evaluate the flaky graphite reserves found along the east coast of Madagascar. Self-potential (SP) combined with induced polarization (IP) and electrical resistivity tomography (ERT) methods were applied and provide information about the graphite ore spatial distribution. Unlike conventional geophysical survey methods that use SP and electromagnetic (EM) methods for exploration of this type of metal, the addition of IP and ERT offers a geoelectrical map and section which indicate correlations with the graphite content.〈/p〉 〈p〉The obtained SP map enabled us to delineate the mineralized area whereas the geoelectrical sections obtained from ERT and IP provide additional information on the vertical extent of the mineral of interest, in this case flake-graphite. We overlaid the graphite content, as measured on samples, on the SP map in order to verify the effectiveness of the geophysical methodology. Good correlation between negative SP anomalies and positive indication of graphite content confirms that the methods used in this study (SP, ERT and IP) are sensitive for delineation of the mineralized zone and consequent evaluation of the ore reserve. Resistivity and chargeability obtained from the inversion of the ERT/IP data are low and high, respectively, within the saturated zone inside SP-anomalous zones.〈/p〉 〈p〉The principal ore body is located in the lateritic zone composed of clay-rich formations derived from the weathering of gneiss and migmatite rocks. Negative SP anomalies, along with low electrical resistivity and high chargeability values, are found mainly in areas where the graphitic content exceeds 5%.〈/p〉 〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - Biomembranes, Volume 1861, Issue 8〈/p〉 〈p〉Author(s): 〈/p〉

Beschreibung: 〈p〉Publication date: 1 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - Molecular Basis of Disease, Volume 1865, Issue 10〈/p〉 〈p〉Author(s): Tomonaga Ichikawa, Shingo Nakahata, Masahiro Fujii, Hidekatsu Iha, Kazuya Shimoda, Kazuhiro Morishita〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉N-myc downstream-regulated gene 2 (NDRG2) is a candidate tumor suppressor that is frequently downregulated in adult T-cell leukemia/lymphoma (ATLL) and functions to negatively regulate several cellular signaling pathways as PP2A recruiter. To clarify the molecular mechanisms of suppression of NDRG2 expression, we initially determined the expression pattern of NDRG2 in various types of T-cells and ATLL cells. NDRG2 expression was significantly upregulated in HTLV-1/Tax-immortalized T-cells, which was mediated by NF-κB activation through Tax expression. On the other hand, NDRG2 expression was suppressed in HTLV-1-infected cell lines and various types of ATLL cells, which was dependent on the DNA methylation of the NDRG2 promoter. We found that the expression of enhancer of zeste homolog 2 (EZH2), a member of the polycomb family, is increased in ATLL, and that EZH2 directly binds to the NDRG2 promoter and induces DNA methylation of the NDRG2 promoter. Since the expression of EZH2 were anti-parallelly regulated with the NDRG2 expression, EZH2 might be one of the most important regulators of the downregulation of NDRG2, contributing to enhanced activation of signaling pathways during ATLL development.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 September 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - Biomembranes, Volume 1861, Issue 9〈/p〉 〈p〉Author(s): Mariafrancesca Scalise, Michele Galluccio, Lorena Pochini, Jessica Cosco, Miriam Trotta, Manuele Rebsamen, Giulio Superti-Furga, Cesare Indiveri〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The lysosomal amino acid transporter SLC38A9 is referred to as transceptor, i.e. a transporter with a receptor function. The protein is responsible for coupling amino acid transport across the lysosomal membrane according to the substrate availability to mTORC1 signal transduction. This process allows cells to sense amino acid level responding to growth stimuli in physiological and pathological conditions triggering mTOR regulation. The main substrates underlying this function are glutamine and arginine. The functional and kinetic characterization of glutamine and arginine transport was performed using human SLC38A9 produced in 〈em〉E. coli〈/em〉, purified by affinity chromatography and reconstituted in liposomes. A cooperative behaviour for the wild type protein was revealed for both the substrates. A novel Na〈sup〉+〈/sup〉 binding site, namely T453, was described by combined approaches of bioinformatics, site-directed mutagenesis and transport assay. Stimulation by cholesterol of glutamine and arginine transport was observed. The biological function of SLC38A9 relies on the interaction between its N-terminus and components of the mTOR complex; a deletion mutant of the N-terminus tail was produced and transport of glutamine was assayed revealing that this portion does not play any role in the intrinsic transport function of the human SLC38A9. Different features for glutamine and arginine transport were revealed: human SLC38A9 is competent for glutamine efflux, while that of arginine is negligible. In line with these results, imposed ∆pH stimulated glutamine, not arginine transport. Arginine plays, on the contrary, a modulatory function and is able to stimulate glutamine efflux. Interestingly, reciprocal inhibition experiments also supported by bioinformatics, suggested that glutamine and arginine may bind to different sites in the human SLC38A9 transporter.〈/p〉〈/div〉 〈/div〉 〈div xml:lang="en"〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉Proteoliposome reconstitution of hSLC38A9 WT and mutants.〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0005273619301567-ga1.jpg" width="301" alt="Unlabelled Image" title="Unlabelled Image"〉〈/figure〉〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: September 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - General Subjects, Volume 1863, Issue 9〈/p〉 〈p〉Author(s): 〈/p〉

Beschreibung: 〈p〉Publication date: 3 September 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochemical and Biophysical Research Communications, Volume 516, Issue 4〈/p〉 〈p〉Author(s): Shuangdong Chen, Yixiao Gu, Qinxue Dai, Yanshu He, Junlu Wang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Sirtuin1 (SIRT1), which is regulated by microRNA-34a (miR-34a), can modulate pathophysiology processes, including nonalcoholic fatty liver disease and intestinal ischemia/reperfusion injury. We previously reported that SIRT1, an NAD〈sup〉+〈/sup〉-dependent deacetylase, plays a vital role in the development of neuropathic pain. However, the role of miR-34a/SIRT1 in complete Freund's adjuvant (CFA)-induced inflammatory pain remains unclear. In the present study, we examined miR-34a and SIRT1 in CFA mice. MiR-34a levels increased, while SIRT1 decreased in the spinal cord. Inhibiting miR-34a by intrathecal injection of miR-34a antagomir attenuated CFA-induced pain behavior. Moreover, miR-34a antagomir inhibited the CFA-induced SIRT1 decrease in the spinal cord. Furthermore, the analgesic effect of miR-34a antagomir was abrogated by the SIRT1 inhibitor EX-527. Our data provide support that the underlying mechanisms of miR-34a in promoting inflammatory pain may involve negative regulation of SIRT1.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 1 September 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Biochimica et Biophysica Acta (BBA) - Biomembranes, Volume 1861, Issue 9〈/p〉 〈p〉Author(s): Oumaima Et-Thakafy, Fanny Guyomarc'h, Christelle Lopez〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The biological membrane surrounding milk fat globules (MFGM) exhibits lateral phase separation of lipids, interpreted as gel or liquid-ordered phase sphingomyelin-rich (milk SM) domains dispersed in a fluid continuous lipid phase. The objective of this study was to investigate whether changes in the phase state of milk SM-rich domains induced by temperature (T 〈 Tm or T 〉 Tm) or cholesterol affected the Young modulus of the lipid membrane. Supported lipid bilayers composed of MFGM polar lipids, milk SM or milk SM/cholesterol (50:50 mol) were investigated at 20 °C and 50 °C using atomic force microscopy (AFM) and force spectroscopy. At 20 °C, gel-phase SM-rich domains and the surrounding fluid phase of the MFGM polar lipids exhibited Young modulus values of 10–20 MPa and 4–6 MPa, respectively. Upon heating at 50 °C, the milk SM-rich domains in MFGM bilayers as well as pure milk SM bilayers melted, leading to the formation of a homogeneous membrane with similar Young modulus values to that of a fluid phase (0–5 MPa). Upon addition of cholesterol to the milk SM to reach 50:50 mol%, membranes in the liquid-ordered phase exhibited Young modulus values of a few MPa, at either 20 or 50 °C. This indicated that the presence of cholesterol fluidized milk SM membranes and that the Young modulus was weakly affected by the temperature. These results open perspectives for the development of milk polar lipid based vesicles with modulated mechanical properties.〈/p〉〈/div〉 〈/div〉 〈div xml:lang="en"〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0005273619301555-ga1.jpg" width="317" alt="Unlabelled Image" title="Unlabelled Image"〉〈/figure〉〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Solid State Communications, Volume 300〈/p〉 〈p〉Author(s): Jayeeta Chowdhury, Sachindra Nath Karmakar〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this paper we have introduced a new method based on real space renormalization group technique to find the density of states of three dimensional quasiperiodic lattices in the thermodynamic limit. The importance of this method lies in the fact that for three dimensional quasiperiodic lattices in this limit, no other technique is available in the literature for the density of states till now. Finding the density of states, we have also studied the electronic specific heat of such lattices and revealed the nature of temperature dependence of the specific heat.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: November 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Ultramicroscopy, Volume 206〈/p〉 〈p〉Author(s): P. Kükelhan, T. Hepp, S. Firoozabadi, A. Beyer, K. Volz〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Quantitative scanning transmission electron microscopy (STEM) is a powerful tool for the characterization of nano-materials. Absolute composition determination for ternary III–V semiconductors by direct comparison of experiment and simulation is well established. Here, we show a method to determine the composition of quaternary III–V semiconductors with two elements on each sub lattice from the intensities of one STEM image. As an example, this is applied to (GaIn)(AsBi). The feasibility of the method is shown in a simulation study that also explores the influence of detector angles and specimen thickness. Additionally, the method is applied to an experimental STEM image of a (GaIn)(AsBi) quantum well grown by metal organic vapour phase epitaxy. The obtained concentrations are in good agreement with X-ray diffraction and photoluminescence results.〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): J.Y. Oh, Tien M. Le, A.T. Pham, D.H. Tran, D.S. Yang, B. Kang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this work, we investigated a correlation between superconductivity and interlayer coupling of two different alkaline (Na and K)-substituted Bi〈sub〉1·6〈/sub〉Pb〈sub〉0·4〈/sub〉Sr〈sub〉2〈/sub〉Ca〈sub〉2〈/sub〉Cu〈sub〉3〈/sub〉O〈sub〉10+δ〈/sub〉 (BSCCO) polycrystalline samples. The excess conductivity analysis by the Aslamazov-Larkin (AL) and Lawrence-Doniach (LD) theories showed that Na substitution at the Ca site induced a gradual broadening of 3D fluctuation region with increasing interlayer coupling strength, which explains a systematic increase of 〈em〉T〈/em〉〈sub〉〈em〉c〈/em〉〈/sub〉 and a decrease of normal state resistivity. On the other hand, exactly the opposite results were observed in the K-substituted samples in place of Sr. Extended x-ray absorption fine structure (EXAFS) studies revealed that substitution of Na and K generated completely different effects on the local structure around Cu atoms. It is noticeable that the Cu–O bond distance was found to decrease monotonically with the varying amounts of Na, which indicates that the CuO〈sub〉2〈/sub〉 layer is stabilized. On the while, the opposite was observed to occur with the varying amounts of K. Unlike the Cu–Ca bond which was the least affected by the substitution, the Cu–Sr bond distance increased drastically with K substitution. All these findings indicate that Na substitution at the Ca site enhances superconductivity with no loss of interlayer interaction, while K substitution at the Sr site weakens superconductivity due to the diminished interlayer interaction.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Moara M. Castro, Shima Sabbaghianrad, Pedro Henrique R. Pereira, Eric M. Mazzer, Augusta Isaac, Terence G. Langdon, Roberto B. Figueiredo〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉A magnesium/aluminium composite was produced by room temperature consolidation through high-pressure torsion (HPT) processing. Half-discs of the pure metals were placed side-by-side and subjected to different numbers of turns. The initially reduced interface between the phases gradually increased with increasing rotation. The composite displayed a significant ductility even after 10 turns. The distribution of hardness in the HPT-processed discs was bi-modal in the early stages of processing. As the number of turns increased and the thickness of the phases decreased there was a noticeable increase in hardness. The hardness values of the composite further increased after thermal treatment due to the formation of intermetallics within the interface between the magnesium and aluminium-rich phases.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Lipeng Xu, Fei Zhou, Jizhou Kong, Haobin Zhou, Qian Zhang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The effects of testing temperature on the electrochemical properties of Li(Ni〈sub〉0.6〈/sub〉Mn〈sub〉0.2〈/sub〉Co〈sub〉0.2〈/sub〉)O〈sub〉2〈/sub〉 are investigated in detail. When the testing temperature is 40 °C, the Li(Ni〈sub〉0.6〈/sub〉Mn〈sub〉0.2〈/sub〉Co〈sub〉0.2〈/sub〉)O〈sub〉2〈/sub〉 cathode material possesses the highest initial discharge capacity of 162.4 mAh·g〈sup〉−1〈/sup〉 at 0.5C rate, but their cycling stability decreases markedly. When the test temperature rises up to 60 °C, the side reaction between electrolyte and cathode material becomes serious, and the Li(Ni〈sub〉0.6〈/sub〉Mn〈sub〉0.2〈/sub〉Co〈sub〉0.2〈/sub〉)O〈sub〉2〈/sub〉 cannot work. When the testing temperature decreases, the electrochemical impedances like R〈sub〉ct〈/sub〉 values increase, and then the discharge capacity at 0 °C, −10 °C and −20 °C is only 80%, 53% and 23% of that at 25 °C. Based on the electrochemical impedance spectra at different temperatures, four kinds of equivalent circuit models are classified. The cycle and rate performance of Li(Ni〈sub〉0.6〈/sub〉Mn〈sub〉0.2〈/sub〉Co〈sub〉0.2〈/sub〉)O〈sub〉2〈/sub〉 cathode material could be improved obviously through Ti〈sub〉3〈/sub〉C〈sub〉2〈/sub〉(OH)〈sub〉2〈/sub〉 modification in an extreme environment, and especially in sub-zero environment.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Kenji Yoshii, Naoshi Ikeda〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Dielectric and magnetocaloric measurements are carried out for the chromite TmCrO〈sub〉3〈/sub〉. This oxide was reported to be multiferroic below the Néel temperature (〈em〉T〈/em〉〈sub〉N〈/sub〉) of ∼125 K, likely due to a structural transformation. The dielectric response shows large dielectric constants below 300 K. However, from the analyses of loss tangent, AC conductivity and dielectric modulus, this behavior is rooted in hopping of charge carriers rather than electric dipoles, as proposed for some other chromites. No dielectric anomaly is found at 〈em〉T〈/em〉〈sub〉N〈/sub〉. The magnetocaloric effect shows that the magnetic transitions at 〈em〉T〈/em〉〈sub〉N〈/sub〉 as well as the spin reorientation temperature are of a second order. This result strongly suggests the absence of magnetostructural transition at 〈em〉T〈/em〉〈sub〉N〈/sub〉 in accord with no observation of ferroelectric transition at this temperature.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Rattiya Hongtong, Panya Thanwisai, Rattakarn Yensano, Jeffrey Nash, Sutham Srilomsak, Nonglak Meethong〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Core-shell olivine-type electrospun and doped LiFePO〈sub〉4〈/sub〉/FeS/C composite fibers were synthesized via a single-step process employing an electrospinning method using LiOH·H〈sub〉2〈/sub〉O, metal sul phates, H〈sub〉3〈/sub〉PO〈sub〉4〈/sub〉, citric acid, and polyvinylpyrrolidone (PVP) as the starting materials. Electron microscopy studies showed that the mean diameter of the core-shell composite fibers was about 280 ± 20 nm with a LiFePO〈sub〉4〈/sub〉 phase forming a core with a diameter of about 100 ± 20 nm and a carbon shell with a thickness of 80 ± 20 nm. An FeS phase was formed by a direct reduction of iron (II) sulfate (FeSO〈sub〉4〈/sub〉) that was evenly distributed within the core region of the composite fibers and further improved the electronic conductivity of the fibers. Na〈sup〉1+〈/sup〉, Mg〈sup〉2+〈/sup〉, and Al〈sup〉3+〈/sup〉 doping ions affected fiber morphology and electrochemical performance. All composite fibers showed excellent electrochemical performance. However, Al〈sup〉3+〈/sup〉 ions improved the electrochemical performance of the composite fibers to a significantly greater degree than Na〈sup〉1+〈/sup〉 and Mg〈sup〉2+〈/sup〉 doping ions, increasing the electronic and ionic conductivities of the material while maintaining their core-shell composite fiber characteristics.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉Electrospun LiFePO〈sub〉4〈/sub〉/FeS/C and 5% doped 〈math xmlns:mml="http://www.w3.org/1998/Math/MathML" altimg="si1.svg"〉〈mrow〉〈mi〉L〈/mi〉〈mi〉i〈/mi〉〈mi〉F〈/mi〉〈msubsup〉〈mrow〉〈mi〉e〈/mi〉〈/mrow〉〈mrow〉〈mn〉1〈/mn〉〈mo linebreak="badbreak"〉−〈/mo〉〈mrow〉〈mo stretchy="false"〉(〈/mo〉〈mi〉n〈/mi〉〈mi〉x〈/mi〉〈mo linebreak="badbreak"〉/〈/mo〉〈mn〉2〈/mn〉〈mo stretchy="false"〉)〈/mo〉〈/mrow〉〈/mrow〉〈mrow〉〈mn〉2〈/mn〉〈mo linebreak="badbreak"〉+〈/mo〉〈/mrow〉〈/msubsup〉〈msubsup〉〈mrow〉〈mi〉M〈/mi〉〈/mrow〉〈mrow〉〈mi〉x〈/mi〉〈/mrow〉〈mrow〉〈mi〉n〈/mi〉〈mo linebreak="badbreak"〉+〈/mo〉〈/mrow〉〈/msubsup〉〈mi〉P〈/mi〉〈msub〉〈mrow〉〈mi〉O〈/mi〉〈/mrow〉〈mrow〉〈mn〉4〈/mn〉〈/mrow〉〈/msub〉〈/mrow〉〈/math〉/FeS/C (M = Na〈sup〉1+〈/sup〉, Mg〈sup〉2+〈/sup〉, Al〈sup〉3+〈/sup〉) composites with a unique core-shell structure were synthesized via a simple single-step process to improved electrochemical properties for high performance and low cost Li-ion batteries.〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925838819324946-fx1.jpg" width="287" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): L.V.B. Diop, O. Isnard〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The effects of Fe substitution on the structural and magnetic properties of the HoCo〈sub〉12-〈em〉x〈/em〉〈/sub〉Fe〈sub〉〈em〉x〈/em〉〈/sub〉B〈sub〉6〈/sub〉 (0 ≤ 〈em〉x〈/em〉 ≤ 2) series of intermetallic compounds have been studied. All of the compounds form in the rhombohedral SrNi〈sub〉12〈/sub〉B〈sub〉6〈/sub〉-type structure, the lattice constants increasing linearly with 〈em〉x〈/em〉. These compounds are ferrimagnets with a small transition metal magnetic moment and exhibit a spin reorientation transition. The Curie temperature decreases from 147 K for 〈em〉x〈/em〉 = 0–105 K for 〈em〉x〈/em〉 = 2. The Fe for Co substitution leads also to a progressive decrease of the spontaneous magnetization. The spin reorientation transition temperature is significantly reduced upon Fe for Co substitution whereas the compensation temperature is much less sensitive to the Fe composition.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 January 2020〈/p〉 〈p〉〈b〉Source:〈/b〉 Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, Volume 224〈/p〉 〈p〉Author(s): Hayam M. Lotfy, Sarah S. Saleh, Christine M. El-Maraghy〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉An analytical investigation was carried out to study the treatment and amplification of the spectral signals produced by critical concentrations with high accuracy and precision using two advanced approaches. The factorized-spectrum approach was applied through two novel methods which were: absorptivity centering technique via both: factorized zero order absorption spectrum (ACT-FSD〈sup〉0〈/sup〉〈sub〉∆A〈/sub〉) and factorized ratio spectrum (ACT-FSR〈sub〉∆P〈/sub〉). The proposed methods were found to be linear in the ranges of (15–100 μg/mL) and (3–40 μg/mL) for ASP and MTO, respectively. Those methods were compared to the methods following the geometrical standard addition approach: ratio H-point standard addition method (RHPSAM) and geometrical induced amplitude modulation (GIAM). The approaches were applied for the determination of the minor component metoclopramide in its mixture with the major component aspirin in the challengeable ratio of (1,90) respectively in a white multicomponent system. The results obtained from the proposed approaches were statistically compared with each other. The methods were validated according to ICH guidelines where the results were found to be within the acceptable limits. The methods were found to be accurate and reliable for the determination of metoclopramide critical concentration besides aspirin concentration. The results of single factor ANOVA analysis indicated that there is no significant difference among the developed methods. These methods provided simple resolution of this binary combination from synthetic mixtures and pharmaceutical preparation and can be conveniently adopted for routine quality control analysis.〈/p〉〈/div〉 〈/div〉 〈div xml:lang="en"〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S1386142519307292-ga1.jpg" width="325" alt="Unlabelled Image" title="Unlabelled Image"〉〈/figure〉〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Maxim S. Likhanov, Vladislav O. Zhupanov, Valeriy Yu Verchenko, Andrei A. Gippius, Sergei V. Zhurenko, Alexey V. Tkachev, Dina I. Fazlizhanova, David Berthebaud, Andrei V. Shevelkov〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉We present a new Fe〈sub〉1–〈em〉x〈/em〉〈/sub〉Re〈sub〉〈em〉x〈/em〉〈/sub〉Ga〈sub〉3〈/sub〉 solid solution, in which a 5〈em〉d〈/em〉-metal––rhenium––partially substitutes for iron to the limiting composition of 〈em〉x〈/em〉 = 0.10. The crystal structure refined for the composition Fe〈sub〉0.91〈/sub〉Re〈sub〉0.09〈/sub〉Ga〈sub〉3〈/sub〉 shows the expected increase in the unit cell parameters compared to the parent FeGa〈sub〉3〈/sub〉 compound, however the M–M (M = Fe, Re) distance decreases within the M–M dumbbell, indicating an increased M–M bonding density. Therein, investigation of the local structure by means of 〈sup〉69,71〈/sup〉Ga NQR spectroscopy revealed the formation of homonuclear Fe–Fe and Re–Re dumbbells. Transport and thermoelectric properties have been investigated for the Re-substituted FeGa〈sub〉3〈/sub〉. Electrical transport measurements showed preservation of the nonmetallic conductivity of Fe〈sub〉1–〈em〉x〈/em〉〈/sub〉Re〈sub〉〈em〉x〈/em〉〈/sub〉Ga〈sub〉3〈/sub〉 despite the decrease of the valence electron concentration from 17 to 16.9 electrons per formula. At low temperatures, Fe〈sub〉1–〈em〉x〈/em〉〈/sub〉Re〈sub〉〈em〉x〈/em〉〈/sub〉Ga〈sub〉3〈/sub〉 is a 〈em〉p〈/em〉-type semiconductor with the band gap of 0.4 eV, but with increasing temperature the sign of the dominant charge carriers changes. Owing to the alloying effect, Fe〈sub〉1–〈em〉x〈/em〉〈/sub〉Re〈sub〉〈em〉x〈/em〉〈/sub〉Ga〈sub〉3〈/sub〉 displays 1.5 times lower thermal conductivity than FeGa〈sub〉3〈/sub〉, which increases at high temperatures because of the growing contribution of the electronic term.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925838819325198-fx1.jpg" width="454" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Jiashu Zhang, Weiyao Zhao, Zhenjie Feng, Jun-Yi Ge, Jincang Zhang, Shixun Cao〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉We report the crystal growth, structure analysis and magnetic phase transitions in the single crystal Sm〈sub〉0.15〈/sub〉Dy〈sub〉0.85〈/sub〉FeO〈sub〉3〈/sub〉. The high-quality of the crystal is verified by X-ray diffraction technique. Our research reveals that: 1) the iron sublattice spin reorientation (SR) transition emerges at 25 K, and ends at 10 K; 2) the rare earth antiferromagnetic (AF) order transition happens at 2.6 K; 3) there is a special wasp-waist hysteresis loop at low temperatures. Knowledge of such phase transitions in rare earth orthoferrite system is of potential importance for applications and theoretical studies.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: December 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Applied Soil Ecology, Volume 144〈/p〉 〈p〉Author(s): Kobayashi Makoto, Semyon V. Bryanin, Kentaro Takagi〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Due to spring climate warming, snowpack has been decreasing and the snowmelt timing has simultaneously been advancing in the cool-temperate forests of northern Japan. To investigate the effect of advancing snowmelt at the end of the snow season on soil nitrogen dynamics via overwintering earthworms, we conducted a snow removal field experiment at the end of the snow season using mesocosms with and without earthworms. In this study, the differences in the effect of snow removal on soil nitrogen according to the presence/absence and body size of 〈em〉Eisenia japonica〈/em〉 were also tested in both early spring (April) and late spring (May). The snow removal did not influence the survival rate, body weight, or cast production of 〈em〉E. japonica〈/em〉. In early spring, while the snow removal increased nitrification significantly by 61%, the effect of snow removal was similar irrespective of the earthworm treatments. This indicates that neither the presence of earthworms nor earthworm body size influences the effect of snow reductions at the end of the snow season on the soil nitrogen dynamics in early spring. On the other hand, in late spring, snow removal no longer had a significant effect on soil nitrogen dynamics, while ammonification and nitrification significantly increased by 195% and by 50%, respectively, in the mesocosms with adult earthworms compared to the mesocosms without 〈em〉E. japonica〈/em〉 earthworms. These findings indicate that the effects of snow decrease and the simultaneous advancement of snowmelt timing at the end of the snow season on soil nitrogen appear only just after snowmelt; alternatively, the effect of earthworm body size on soil nitrogen dynamics is predominant in late spring in snowy cool-temperate forests.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: August 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Electron Spectroscopy and Related Phenomena, Volume 235〈/p〉 〈p〉Author(s): A.S. Komolov, E.F. Lazneva, N.B. Gerasimova, Yu. A. Panina, V.S. Sobolev, A.V. Koroleva, S.A. Pshenichnyuk, N.L. Asfandiarov, A. Modelli, B. Handke, O.V. Borshchev, S.A. Ponomarenko〈/p〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉The atomic composition and the electronic properties of ultrathin films of the four-conjugated rings thiophene/phenylene co-oligomers end-terminated by the −CH〈sub〉3〈/sub〉 and by the -CF〈sub〉3〈/sub〉 radicals vacuum deposited onto the oxidized silicon surface were studied using the X-ray photoelectron spectroscopy (XPS) and total current spectroscopy (TCS) techniques. The relative concentrations of the C, S and F atoms measured from the film deposits were evaluated and were found to correspond to the chemical formulae of the CH〈sub〉3〈/sub〉-phenylene-thiophene-thiophene-phenylene−CH〈sub〉3〈/sub〉 (CH〈sub〉3〈/sub〉-PTTP−CH〈sub〉3〈/sub〉) and CF〈sub〉3〈/sub〉-phenylene-thiophene-thiophene-phenylene-CF〈sub〉3〈/sub〉 (CF〈sub〉3〈/sub〉-PTTP-CF〈sub〉3〈/sub〉) molecules studied. The TCS measurements during the increase of the organic layer thickness up to 6 nm on a (SiO〈sub〉2〈/sub〉)n-Si substrate were used to determine the conduction band peak structure related to the density of the unoccupied electronic states (DOUS) in the range from 5 eV to 22 eV above E〈sub〉F〈/sub〉. DOUS of the films investigated was also obtained theoretically by means of 〈em〉ab initio〈/em〉 calculations. According to the calculations, the energy position of the lowest unoccupied molecular orbital (LUMO) peak was found at 4.4 eV in the case of the CH〈sub〉3〈/sub〉-PTTP−CH〈sub〉3〈/sub〉 film and at 3.9 eV in the case of the CF〈sub〉3〈/sub〉-PTTP-CF〈sub〉3〈/sub〉 film. The effect of fluorine substitution on the DOUS was determined as approximately 2 eV peak shift towards low electron energies in the case of the CF〈sub〉3〈/sub〉-PTTP-CF〈sub〉3〈/sub〉 film compared to the case of the CH〈sub〉3〈/sub〉-PTTP−CH〈sub〉3〈/sub〉 film in the electron energy range from 10 eV to 22 eV above E〈sub〉F〈/sub〉 and as a more complex peak restructuring in the energy range from 5 eV to 10 eV above E〈sub〉F〈/sub〉. The DOUS peaks of the two films studied were assigned to molecular orbitals with π* character in the 5–9.5 eV energy range and molecular orbitals with σ* character in the 9.5–22 eV energy range above E〈sub〉F〈/sub〉.〈/p〉〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0368204819300726-ga1.jpg" width="476" alt="Graphical abstract for this article" title=""〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Yuliang Jiang, Xueyan Fu, Zidong Zhang, Wei Du, Peitao Xie, Chuanbing Cheng, Runhua Fan〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Carbon nanofibers embedded with magnetic Fe〈sub〉3〈/sub〉C nanoparticles have been synthesized using electrospinning technique, followed by one-step carbonization. By using Fe〈sub〉3〈/sub〉C/C nanofibers as filler with 10% content, the sample can achieve a minimum reflection loss (RL) of −54.94 dB with a thickness of 1.36 mm, as well as the broad effective absorption bandwidth (EAB) can reach to 4.5 GHz (13.3–17.8 GHz) at the thickness of 1.55 mm. The superior properties might be due to the synergistic effects of dielectric loss, magnetic loss, multiple scattering and reflection. This work presents a facile and promising method to produce high performance microwave absorption materials with thin thickness, light weight and strong absorption.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): E.J. Pickering, K.A. Christofidou, H.J. Stone, N.G. Jones〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In order to reduce the environmental impact of air travel, it is desirable that the efficiencies of gas turbine engines are increased. One way to achieve this goal is to increase the operating temperatures of the engine cores. Unfortunately for aero-engine manufacturers, the temperature capability limits of the Ni-base superalloys used currently have been reached. Hence, new alloys need to be developed that are capable of operating at significantly higher temperatures. In this article, the potential of tantalum-base superalloys is discussed and explored. A suite of alloys based on the Ta-Al-Co system was investigated. It was found that an array of fine carbide precipitates was formed in the Ta-rich matrix in a subset of the alloys, which is promising in terms of developing a strong and damage-tolerant microstructure, but that the elemental partitioning of Al out of the matrix accompanying precipitation is likely to degrade environmental resistance. Nevertheless, it is believed that the design principles described have the potential to facilitate the development of the next generation of high-temperature alloys based on systems of this type.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): C.Q. Zhou, Q.A. Zhang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In order to understand the effect of Pr〈sub〉3〈/sub〉Al〈sub〉11〈/sub〉 nanoparticles on crystallite growth kinetics of nanocrystalline Mg, the crystallite growth characteristics in a Mg−Pr〈sub〉3〈/sub〉Al〈sub〉11〈/sub〉 composite and a pure Mg sample were comparatively investigated in this work. The crystallite growth exponents of nanocrystalline Mg in the Mg−Pr〈sub〉3〈/sub〉Al〈sub〉11〈/sub〉 composite and pure Mg were determined as 〈em〉n〈/em〉 = 5 and 〈em〉n〈/em〉 = 4, respectively. Meanwhile, the activation energy for crystallite growth in Mg−Pr〈sub〉3〈/sub〉Al〈sub〉11〈/sub〉 composite was calculated to be 118.8 kJ/mol, which is higher than 97.1 kJ/mol in pure nanocrystalline Mg. Further studies reveal that the rise of crystallite growth exponent and increase of activation energy in the Mg−Pr〈sub〉3〈/sub〉Al〈sub〉11〈/sub〉 composite are primarily attributed to the pinning effect of Pr〈sub〉3〈/sub〉Al〈sub〉11〈/sub〉 nanoparticles at crystallite boundaries of Mg.〈/p〉〈/div〉 〈/div〉

Beschreibung: 〈p〉Publication date: 5 October 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Journal of Alloys and Compounds, Volume 804〈/p〉 〈p〉Author(s): Liming Tan, Yunping Li, Wenkai Deng, Yong Liu, Feng Liu, Yan Nie, Liang Jiang〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉Three Ni-base powder metallurgy superalloys have been developed recently, and tensile tests at temperatures ranging from room temperature (RT) to 815 °C were conducted on them. The results conformed their excellent tensile properties, in comparison with several other existed polycrystalline superalloys. In this work, by means of microstructure characterization, thermal dynamic calculations, and theoretical modeling, different strengthening mechanisms including precipitation strengthening, grain boundary strengthening, solid solution strengthening, and Orowan strengthening, were found to contribute to the yield strength in different degrees, which would help to further enhance the tensile properties of these alloys through composition design and processing optimization thereafter.〈/p〉〈/div〉 〈/div〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S0925838819324892-fx1.jpg" width="459" alt="Image 1" title="Image 1"〉〈/figure〉〈/p〉〈/div〉

Beschreibung: 〈p〉Publication date: 5 December 2019〈/p〉 〈p〉〈b〉Source:〈/b〉 Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, Volume 223〈/p〉 〈p〉Author(s): Rui Zhang, Yun Liu, Lin Kong, Xian-Yun Xu〈/p〉 〈div xml:lang="en"〉 〈h5〉Abstract〈/h5〉 〈div〉〈p〉In this study, a two photon absorbing (TPA) material consisting silver nanoparticles and triphenylamine-thiol derivative (TBS) has been prepared through interfacial coordination effect according to soft-hard-acid-base principle. The interfacial structure and morphology of the hybrid are researched in detail. Linear and nonlinear optical properties of the hybrid are studied. Upon interfacial coordination, the hybrid shows red-shifted UV–Vis absorption, causing from enhanced electronic drawing strength due to existence of Ag atom. The results also indicate that the surface Plasmon resonance (SPR) effect of Ag nanoparticles (~6 nm) brings about enhancement in single photon fluorescence emission and two photon absorption. Compared with free TBS, Ag-TBS hybrids show higher TPA cross-section (δ), which is 8784 GM for TBS and up to 103876 GM for Ag-TBS hybrid, showing ~12 fold increase. Due to excellent TPA property, the hybrids have good application in the field of optical power limiting and its limiting threshold is 0.49 J/cm〈sup〉−2〈/sup〉. This type of interfacial coordination induced hybrid provides a promising strategy to regulate linear optical properties and optimize nonlinear performance.〈/p〉〈/div〉 〈/div〉 〈div xml:lang="en"〉 〈h5〉Graphical abstract〈/h5〉 〈div〉〈p〉A thiol-Ag nanohybrid has been prepared through interfacial coordination effect and self-assembly process to optimize the TPA performance.〈figure〉〈img src="https://ars.els-cdn.com/content/image/1-s2.0-S1386142519307280-ga1.jpg" width="500" alt="Unlabelled Image" title="Unlabelled Image"〉〈/figure〉〈/p〉〈/div〉 〈/div〉