ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Articles  (47)
  • oxidation  (47)
  • Springer  (47)
  • American Chemical Society
  • Emerald
  • 1995-1999  (47)
  • 1997  (47)
  • 1
    Electronic Resource
    Electronic Resource
    Springer
    Journal of applied electrochemistry 27 (1997), S. 1275-1282 
    ISSN: 1572-8838
    Keywords: Carbon monoxide ; Pt-Ru/C catalyst ; Tafel slopes ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology , Electrical Engineering, Measurement and Control Technology
    Notes: Abstract CO electrooxidation on a Pt–Ru/C catalyst was investigated in sulphuric acid electrolyte. The physico-chemical properties of the Pt–Ru/C catalyst were studied by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The influence of temperature, CO partial pressure and proton concentration on the electrochemical oxidation rate was investigated by steady-state galvanostatic polarization measurements. The apparent activation energy decreased from 70 to 30kJmol−1 as the overpotential increased from 0.5 to 0.9V vs NHE. The reaction order with respect to carbon monoxide increased, passing from 0.4 to 1, with the increase of the overpotential from 0.5 to 0.7V vs NHE; a reaction order close to −1 with respect to the protonic concentration was observed, irrespective of the potential. Tafel slopes of about 136mVdec−1 were determined for oxidation of CO and CO/N2 mixtures.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 2
    ISSN: 1572-8757
    Keywords: porous carbons ; activation ; oxidation ; surface oxygen groups ; LTPD
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology , Physics , Process Engineering, Biotechnology, Nutrition Technology
    Notes: Abstract A styrene/divinylbenzene copolymer has been used as precursor for making porous carbons with bimodal pore size distributions (i.e., with both microporosity and mesoporosity). Pretreatment of the as-received copolymer by mild oxidation in air, significantly increased the carbon yield after carbonization. Reactivity studies of the polymer-based chars to CO2 clearly show the influences of some important factors such as carbonization temperature, heating rate, soak time on char reactivities. Bimodal porous carbons were prepared by carbonization of the preoxidized styrene/divinylbenzene copolymer in N2, followed by activation in CO2 at different temperatures to different levels of burnoff. The pore structures of the porous carbons produced have been characterized by various techniques such as gas adsorption and mercury porosimetry. The surfaces of the porous carbons produced, and a commercial carbon adsorbent, have been modified with HNO3 and H2O2 treatment at various conditions. Characterization of the surface oxygen functionality, both quantitatively and qualitatively, has been achieved using techniques such as Linear Temperature Programed Desorption (LTPD) and selective neutralization of bases.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 3
    ISSN: 1572-8765
    Keywords: carbonado ; diamond ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation of carbonado type synthesized polycrystalline diamonds produced from graphite together with catalytic Ni-Mo alloy doped with TiB2 and BNcub was investigated. It was found that the addition of these boron compounds increases the oxidation resistance of the carbonado type synthesized polycrystalline diamonds. The oxidation mechanism acting on the carbonado type synthesized polycrystalline diamonds and the role of boron compounds in increasing the resistance to the oxygen reaction are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 4
    ISSN: 1572-879X
    Keywords: fluorination ; alumina ; platinum catalysts ; oxidation ; oxidation of benzene
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Platinum supported on fluorinated alumina is more active for the total oxidation of benzene than is the catalyst with the same Pt loading supported on hydrophilic unfluorinated alumina. The Pt-F/alumina catalyst contains well-dispersed small Pt particles, in contrast to Pt/alumina. The high dispersion is a consequence of a strong metal-support interaction.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 5
    Electronic Resource
    Electronic Resource
    Springer
    European journal of nutrition 36 (1997), S. 336-339 
    ISSN: 1436-6215
    Keywords: Amino acids ; protein ; metabolism ; meal feeding ; oxidation ; breath test ; Aminosäuren ; Protein ; Stoffwechsel ; Fütterung ; Oxidation ; Atemtest
    Source: Springer Online Journal Archives 1860-2000
    Topics: Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition , Medicine
    Description / Table of Contents: Zusammenfassung Die aktuellen Mengen an freien Aminosäuren im Blut reichen nur aus, um die Ganzkörper-Proteinsynthese für einige Minuten aufrecht zu erhalten. Das zeigt, daß die freien Aminosäurenkonzentrationen in der Zirkulation klein und konstant gehalten werden im Vergleich zu den Mengen der Aminosäuren, die täglich aufgenommen und über die Körperproteine umgesetzt werden. Das Verschwinden der Aminosäuren exogenen oder endogenen Ursprungs aus dem freien Aminosäuren-Pool, findet hauptsächlich durch die Proteinsynthese und den Aminosäurenabbau statt. Die Partitionierung der Nahrungs-Aminosäuren zwischen diesen beiden Prozessen im Kurzzeitbereich werden als bedeutsam für die Ökonomie der Ganzkörper-Aminosäuren angesehen. Eine Verbesserung der Aminosäurenökonomie könnte durch solche nutritiven Maßnahmen erreicht werden, welche die Clearance der Nahrungsaminosäuren durch die Proteinsynthese anstelle des Aminosäurenabbaus begünstigen. Diese nutritiven Maßnahmen sollten sich an den „Schwellenwerten“ des Abbaus der individuellen Aminosäuren orientieren.
    Notes: Summary Actual amounts of free amino acids in the blood are sufficient to support whole body protein synthesis for some minutes only. This indicates that the levels of free amino acids in the circulation are kept small and constant relative to the amounts of amino acids supplied by daily intake and turnover of body proteins. The clearance of the amino acids originating from either endogenous or exogenous sources is mainly due to protein synthesis and metabolic degradation. The partitioning of dietary amino acids between these processes, on the short term, is supposed to play an important role in whole body amino acid economy. Therefore whole body amino acid economy could be improved by nutritional measures that favour the clearance of dietary amino acids by protein synthesis instead of by metabolic degradation. These nutritional measures should to be focused on threshold values for metabolic degradation of individual amino acids.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 6
    Electronic Resource
    Electronic Resource
    Springer
    Microchimica acta 125 (1997), S. 401-406 
    ISSN: 1436-5073
    Keywords: fullerenes ; intercalation ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The investigation of structural and electronic properties of the novel family of fullerenes depends on the existence of pure reference materials. Sublimation of the van-der Waals solids is a suitable purification method. Little attention has been paid to the question about the air stability of such sublimed samples in form of crystals or thin films. A combination of thermal desorption spectroscopy, thermal analysis and diffuse reflectance FT-IR spectroscopy is used to show the extent to which oxygen from dry air is intercalated into fullerenes and which detrimental reactivity occurs from attempts to thermally remove („nneal”) air-exposed samples. The conclusion is that any fullerene sample exposed to air will be transformed in part into a polymeric non-fullerene carbon upon thermal treatment to above 400 K irrespective of its initial purity.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 7
    Electronic Resource
    Electronic Resource
    Springer
    Nutrient cycling in agroecosystems 49 (1997), S. 91-95 
    ISSN: 1573-0867
    Keywords: greenhouse effect ; land use ; methane ; oxidation ; soils
    Source: Springer Online Journal Archives 1860-2000
    Topics: Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition
    Notes: Abstract Intact core samples from soils with different textures and land use were tested for their capacity to oxidise methane. The soil cores were taken from arable land, grassland and forest. It was found that coarse textured soils (6.74–16.38 µg CH4 m-2 h-1) showed a higher methane uptake rate than fine textured soils (4.66–5.34 µg CH4 m-2 h-1). Increasing soil tortuosity was thought to reduce the methane oxidation rate in fine textured soils. The oxidation rate of forest soils (16.32–16.38 µg CH4 m-2 h-1), even with a pH below 4.5, was very pronounced and higher than arable land (11.40–14.47 µg CH4 m-2 h-1) and grassland (6.74–9.30 µg CH4 m-2 h-1). Within the same textural class arable land showed a faster methane uptake rate than grassland. In grassland with a fine texture, even methane production was observed. Nitrogen availability and turnover in these land use systems were thought to cause the different oxidation rates. Decreasing the moisture content slowed down the oxidation rate in all soils. This could be caused by an increased N turnover and a starvation of the methanotrophic bacteria.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 8
    Electronic Resource
    Electronic Resource
    Springer
    Nutrient cycling in agroecosystems 49 (1997), S. 59-70 
    ISSN: 1573-0867
    Keywords: land use ; methane ; nitrogen fertilizer ; oxidation ; soil
    Source: Springer Online Journal Archives 1860-2000
    Topics: Agriculture, Forestry, Horticulture, Fishery, Domestic Science, Nutrition
    Notes: Abstract Aerobic soils are an important sink for methane (CH4) contributing up to 15% of annual global CH4 destruction. However, the sink strength is significantly affected by land management, nitrogen (N) fertilizers and acidity. We tested these effects on samples taken from the Broadbalk Continuous Wheat, Park Grass permanent grassland and Broadbalk and Geescroft Wilderness experiments at Rothamsted. The rates of uptake from the atmosphere of both enhanced (10 ppmv) and ambient (2 ppmv) concentrations of CH4 were measured in laboratory incubations of soil cores under controlled conditions. The most rapid rates of uptake were measured in soil from deciduous woodland at pH 7 (measured in water); acidic (pH 4) woodland soil showed no net CH4 oxidation. While disturbance of the cores used in the experiments did not affect the rate of CH4 uptake, extended (150 years) cultivation of land for arable crops reduced uptake rate by 85% compared to that in the soil under calcareous woodland. The long-term application of ammonium- (NH4) based fertilizer, but not nitrate- (NO3) based fertilizer, completely inhibited CH4 uptake, but the application for the same period of farmyard manure that contained more N than the fertilizer had no inhibitory effect. Although the effects of agricultural practice on the oxidation of CH4 in soil are significant, the differences in oxidation rates between land use types are even greater. The likely effects of forest clearance, agricultural intensification and anthropogenic emissions of CH4 over the last 2500 years have been estimated for the United Kingdom. The calculations indicate that 54% of the current CH4 uptake by UK soils is the result of increased CH4 mixing ratio. They also indicate that land use change has decreased the potential sink strength by 62% or 37 kt CH4 g-1. In countries with much larger land areas than the UK, such as China, aerobic soil is likely to be a more significant factor in calculating net fluxes of CH4. It is important that the impacts of different agricultural managements and land use systems are understood and quantified so that the best possible estimate of CH4 sinks is calculated for comparison with sources.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 9
    ISSN: 1572-9508
    Keywords: X-ray ; calibration ; filters ; interference ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Physics
    Notes: Abstract We report on UV/Visible transmission measurements of aluminum coated Lexan filters designed as UV blocking filters for soft x-ray detectors. Transmission of the filters in the 2300-8000 Å wavelength range is significantly higher than expected. It cannot be accounted for applying a simple slab model of the transmission and adopting material properties reported in the literature. We show that this is due to interference effects which are strongly dependent on the filter geometry, and to oxidation of exposed aluminum surfaces and/or chemical interaction with the plastic support. The results of this work have led to the redesign of the Advanced X-ray Astrophysics Facility High Resolution Camera UV blocking filters.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 10
    Electronic Resource
    Electronic Resource
    Springer
    Archives of microbiology 167 (1997), S. 106-111 
    ISSN: 1432-072X
    Keywords: Key wordsNitrosomonas ; Anaerobic ammonia ; oxidation ; Anaerobic cell growth ; Nitrogen dioxide ; Nitric oxide ; Nitrous oxide ; Dinitrogen
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology
    Notes: Abstract Nitrosomonas eutropha, an obligately lithoautotrophic bacterium, was able to nitrify and denitrify simultaneously under anoxic conditions when gaseous nitrogen dioxide (NO2) was supplemented to the atmosphere. In the presence of gaseous NO2, ammonia was oxidized, nitrite and nitric oxide (NO) were formed, and hydroxylamine occurred as an intermediate. Between 40 and 60% of the produced nitrite was denitrified to dinitrogen (N2). Nitrous oxide (N2O) was shown to be an intermediate of denitrification. Under an N2 atmosphere supplemented with 25 ppm NO2 and 300 ppm CO2, the amount of cell protein increased by 0.87 mg protein per mmol ammonia oxidized, and the cell number of N. eutropha increased by 5.8 × 109 cells per mmol ammonia oxidized. In addition, the ATP and NADH content increased by 4.3 μmol ATP (g protein)–1 and 6.3 μmol NADH (g protein)–1 and was about the same in both anaerobically and aerobically grown cells. Without NO2, the ATP content decreased by 0.7 μmol (g protein)–1, and the NADH content decreased by 1.2 μmol (g protein)–1. NO was shown to inhibit anaerobic ammonia oxidation.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 11
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 49 (1997), S. 745-753 
    ISSN: 1572-8943
    Keywords: DSC ; kerogen ; oxidation ; pyrolysis ; type determination
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The rate of pyrolysis and oxidation of 8 different samples of oil shale kerogen concentrate (KC) were investigated using DSC analysis. Recently performed thermogravimetric studies (TG and DTG) with the same samples of KC indicated that the activation energy of the pyrolysis of specific KCs increases with increasing paraffinic structure in the KC. An opposite effect, i.e. a decrease of the activation energy with an increase of paraffinic structure was determined in the case of KC oxidation. In this study, using the standard ASTM E-698 method based on the determined temperature at which the maximum heat effect could be observed (exo in the case of oxidation and endo in the case of pyrolysis), an activation energy for the pyrolysis, as well as for the oxidation process was determined and also successfully correlated with the content of paraffinic structure of KC. Thus, the higher content of paraffinic structure in KCs indicates that higher values of the activation energy could be determined either in the case of pyrolysis or oxidation followed by DSC analysis.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 12
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 49 (1997), S. 1017-1023 
    ISSN: 1572-8943
    Keywords: degradation ; microcalorimetry ; moisture ; oxidation ; permeability
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The use of isothermal microcalorimetry (MC) as a sensitive monitor for slow reactions is demonstrated in a number of examples. In Example 1 the spontaneous decomposition of a nitrate ester propellant is studied and the absolute degradation rate estimated. Example 2 illustrates how MC can be used for comparing the rate of oxidative ageing at different O2 concentrations. Synergetic effects between oxygen and moisture in accelerated ageing of nitrile rubber are evaluated from a so-called 4-point test in Example 3. The last example shows a simple MC technique for rapid determination of moisture permeability through a polymeric sealant.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 13
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 48 (1997), S. 657-664 
    ISSN: 1572-8943
    Keywords: nickel powders ; oxidation ; thermal analysis
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Monodispersed fine metal nickel powders of uniform shape and high purity are increasingly required for specific uses in many technological areas, especially in the preparation of electronic materials such as the manufacture of conductive inks and pastes and the formation of catalysts. Metallic nickel powders were prepared in ethylene glycol by the reduction of a nickel solution. Hydrazine was used as a reducing agent. Metal powders were characterized by chemical analysis, scanning electron microscopy (SEM), thermogravimetry (TG), derivative thermogravimetry (DTG) and differential scanning calorimetry (DSC). Particle size distributions were determined using laser light scattering. The reactivity and purity of these fine nickel powders were tested by repeated oxidation and reduction of nickel powders in oxidative and reductive atmospheres.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 14
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 49 (1997), S. 1501-1507 
    ISSN: 1572-8943
    Keywords: calcium sulphide ; gypsum ; oxidation ; phosphogypsum ; reduction ; stability ; thermogravimetry
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Using a heating rate of 2°C min−1, CaS reacts with oxygen in air from 700°C to form CaSO4, with a complete conversion at 1100°C. Synthesis of CaS from the reaction between CaSO4 containing compounds and carbon compounds in air would not be possible, as the carbon reacts from 600°C with oxygen in the air to give CO2. Heating stoichiometric amounts of carbon and pure CaSO4, synthetic gypsum or phosphogypsum in a nitrogen atmosphere, results in the formation of CaS from 850°C. Using a heating rate of 10°C min−1, the formation of CaS is completed at 1080°C. Addition of 5% Fe2O3 as a catalyst lowers the starting temperature of the reaction to 750°C. Activation energy values at different fraction reaction values (α) differ between 340 and 400 kJ mol−1. The relationship between the activation energy values and conversion (α) indicates that the reaction proceeds via multiple steps.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 15
    Electronic Resource
    Electronic Resource
    Springer
    Journal of thermal analysis and calorimetry 49 (1997), S. 1161-1170 
    ISSN: 1572-8943
    Keywords: basicity ; dinitramides ; kinetics ; oxidation ; tanδ ; transition temperatures
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The dinitramide salts of ammonia (ADN), hexamethylenetetramine (HDN), potassium (KDN), and sodium (NaDN) showed a linear relationship between the DSC rate of decomposition at the peak maximum and the DEA tanδ value at the low temperature transition peak. As the cation basicity increased in the series ADN〈HDN〈KDN〈NaDN, there was an increase in the low temperature transition peak, the energy barrier for relaxation, and the decomposition peak temperature, and a decrease in the tanδ value at the low temperature transition peak, specific heat capacity, and the rate and enthalpy of decomposition. The more basic salts were more thermally stable (i.e., higher decomposition temperature) and less energetic (i.e., lower enthalpy of decomposition). The more internal free volume (disorder) present in these salts, the higher the rates of relaxation and decomposition. Five aluminum powders of different surface areas were analyzed by DSC in platinum sample pans, and it was found that the enthalpy and rate of oxidation increased as the particle size of Al decreased while the enthalpy of the Al melt decreased. TG showed a two-step weight gain in the oxidation of Al with plateaus in the 650 and 1130°C regions and the percent weight gain increased as the particle size of Al decreased. Variable DSC and TG heating rate studies showed that the activation energies for the first step in the oxidation process increased as the particle size of Al increased.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 16
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 381-410 
    ISSN: 1573-4889
    Keywords: Ni-Base superalloys ; Astroloy ; Waspaloy ; Udimet 720 ; oxidation ; chromia
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Several commercially available Ni-base superalloys were exposed isothermally in air at temperatures between 750° and 1000°C and also under cyclic conditions at 1000°C. The kinetics of oxidation were determined and the scales were analyzed by electron microscopy and X-ray diffraction. Thin adherent chromia-rich scales formed on the alloys at 750°C after 1000 hr. Although Waspaloy showed the lowest weight gain in this test, it also showed the deepest internal corrosion due to oxidation of the grain-boundary carbides. At temperatures up to 1000°C the external scales were also chromia-rich but there was greater internal corrosion. Titanium in the alloys oxidized, diffusing through the chromia scale to form faceted rutile (TiO2) grains at the surface as well as forming TiO2 and TiN internally. The amount of rutile at the oxide surface increased with temperature and alloy Ti concentration. Alumina formed as discrete internal oxides below the chromia scale, although Astroloy when oxidized isothermally at 1000°C developed a semicontinuous internal layer of alumina due to its higher Al content. Under cyclic conditions Astroloy formed a thicker, less-protective scale of transition oxides probably due to its lower Cr content.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 17
    ISSN: 1573-4889
    Keywords: oxidation ; Incoloy 909 ; superalloy ; scale ; high temperature ; kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation of an Fe-38Ni-13Co-4.7Nb-1.5Ti-0.4Si superalloy (Incoloy 909 type alloy), was investigated at temperatures between 1000 K and 1400 K in Ar-(1, 10%)H20 atmosphere using metallographic, electron probe microanalysis, and X-ray diffraction techniques. The oxide scales consist of an external scale and an internal scale which has an intergranular scale (above 1200 K) and an intergranular scale. The oxide phases in each scale are identified asα-Fe2,O3 (below 1200 K) or FeO (above 1300 K) and CoO · Fe2O3 and FeO · Nb2O5, respectively. The morphologies, the oxide phases and the oxidation rates do not depend on the partial pressure of H2O in the range between one and ten percent in Ar gas. The rate constants for the intergranular-scale formation in this alloy are about one-tenth as large as those in Fe-36%Ni alloy reported previously. At all the temperatures the scales grow according to a parabolic rate law and the apparent activation energies for the processes are estimated.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 18
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 445-464 
    ISSN: 1573-4889
    Keywords: oxidation ; Fe-Cr-Al alloy ; water vapor ; ESCA ; RHEED
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Fe-21.5 wt. %Cr-5.6 wt. %Al oxidation, at 1000°C, in dry or wet oxygen shows that steam has an influence on the oxide-scale growth mechanism. Steam modifies the kinetics of early-stage oxidation. In dry oxygen, an initial fast linear regime is observed during one hour. Under wet conditions, weight-gain curves follow the same parabolic regime over the entire oxidation test. The scale structure strongly depends on the presence of steam in the gaseous environment. With dry oxygen, the scale is composed mainly ofα-Al2O3 after the initial formation ofγ-Al2O3 identified by ESCA and RHEED. The kinetics transient stage corresponds to the necessary time for the internal part of the initialγ-Al2O3 scale to transform into a continuousα-Al2O3 diffusion barrier. Under wet oxygen conditions, transient oxides are identified as (Mg, Fe) (Cr, Al)2O4, MgAl2O4 (orthorhombic), Al2O3 (hexagonal), these oxides transform into MgAl2O4 (cubic), Cr3O4, Fe2O3,α-Al2O3, with time. When water vapor does not change drastically oxidation kinetics, the induced presence of iron and chromium in the oxide scale could be responsible for weakening the protectiveness of alumina scales.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 19
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 507-524 
    ISSN: 1573-4889
    Keywords: alloys ; high temperature ; oxidation ; transient state
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The initial transient high-temperature oxidation stage for binary alloys forming the most-stable oxide has been examined by means of a numerical procedure based on the finite-difference method. At variance with previous models, the present treatment takes into account the effect of the rate of the reaction at the scale/gas interface over the corrosion kinetics. The calculations concerning the transient stage are developed either using the general parabolic rate law to represent the overall scaling kinetics or using the rate law of the reaction at the scale/gas interface as a boundary condition without imposing any particular rate law to the overall process. A correct analysis of the oxidation behavior of binary alloys during the transient stage must take into account the kinetics effect of the rate of the surface reaction. The concentration of the most-reactive element at the alloy/scale interface changes regularly with time, decreasing gradually from the initial bulk value to its final steady-state value. The present results are in good agreement with those obtained by means of an approximate analytical model developed previously.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 20
    ISSN: 1573-4889
    Keywords: high temperatures ; oxidation ; transient state
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The transient state in the oxidation of solid solutions of a most-noble componentA in a most-reactive componentB (beta phase) for binaryA-B alloys presenting a limited reciprocal solubility of the two metals has been examined assuming that theirB content is sufficient for the exclusive growth of externalBO scales. Above a criticalB content of the alloy theBO scales may grow directly on the surface of the beta phase, while below this limit they can only form over a layer ofB-depleted solid solution ofB inA (alpha phase), which appears after a critical time. An approximate analytical expression for the profile of concentration ofB in the alloy has been adopted to calculate the flux ofB in the metal. Moreover, the effect of the reaction between the gas and the external oxide surface has been taken into account using a procedure developed by Wagner for the oxidation of pure metals. The corrosion kinetics as well as all the parameters involved, such as the concentration ofB at the alloy-scale interface, have been calculated as functions of the corrosion time. The results show that, as time proceeds, the instantaneous parabolic rate constant increases and the concentration ofB at the alloy-scale interface decreases, both tending gradually to their corresponding steady-state values. It is also predicted that if the rate of transformation of the beta phase in the alpha phase after the alloy reaches the composition of equilibrium at the interface with the oxide is lower than the corresponding rate of displacement of the alloy surface due to scale growth, the corrosion of beta phase alloys may eventually lead to the formation of two phase mixtures of alpha phase andBO which are expected to grow at much larger rates than in the presence of a uniform continuous alpha layer.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 21
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 48 (1997), S. 1-39 
    ISSN: 1573-4889
    Keywords: Ni-base ODS superalloys ; oxidation ; initial stages of oxidation ; alumina ; chromia
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Mechanically-alloyed Ni-base ODS superalloys currently receive attention for application in future gas turbines because they exhibit outstanding mechanical properties at high temperatures. They also protect themselves against oxidation by forming chromia and/or alumina scales. However, little attention has been given so far to the initial stages of oxidation of Ni-base ODS superalloys, containing Cr as well as Al in considerable amounts. In the current work, oxidation at 1150°C was studied for different holding times up to 200 hr for the commercial materials MA6000 and PM3030 which contain. Al in increasing amounts. MA 754, a chromia former, was investigated as a reference. It was shown that for the potential alumina formers MA6000 and PM3030 the continuity and therefore protectiveness of the secondary Al2O3 at later stages is indeed determined by the initial stages of oxidation.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 22
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 48 (1997), S. 129-141 
    ISSN: 1573-4889
    Keywords: decarburization ; nickel ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract A commercial-grade nickel containing small amounts of carbon, manganese, and silicon was exposed to air for periods up to 288 hr at 1050°C to study the effect of oxidation on the formation of oxides of these impurity elements. Exposure of nickel to air led to decarburization. The maximum amount of decarburization occurred during the initial period of air exposure and the loss in carbon was more in the metal with a smaller section size. Decarburization in the metal produced voids in the oxide scale due to the formation of CO2 gas. It has been shown further that CO and/or CO2 gas bubbles, which form in high purity nickel on grain boundaries during exposure to air at elevated temperatures, cannot exist in commercial-grade nickel where manganese is present as an impurity. Instead, oxides of manganese form in the grain boundaries as well as in the matrix. This is because manganese oxide is more stable than CO or CO2 gas.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 23
    ISSN: 1573-4889
    Keywords: oxidation ; kinetics ; iron ; iron-nitride
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation of α-Fe and ɛ-Fe2N1−z at 573 K and 673 K in O2 at 1 atm was investigated by thermogravimetrical analysis, X-ray diffraction, light-optical microscopy, scanning electron microscopy and electron probe X-ray microanalysis. Upon oxidation at 573 K and 673 K, on α-Fe initially α-Fe2O3 develops, whereas on ɛ-Fe2N1−z initially Fe3O4 develops. In an early stage of oxidation the oxidation rate of ɛ-Fe2N1−z appears to be much larger than of α-Fe. This can be attributed largely to an effective surface area available for oxygen uptake, which is much larger for ɛ-Fe2N1−z than for α-Fe due to the porous structure of ɛ-Fe2N1−z as prepared by gaseous nitriding of iron. The development of a magnetite layer in-between the hematite layer and the α-Fe substrate, at a later stage of oxidation, enhances layer-growth kinetics. After 100 min oxidation at 673 K the (parabolic) oxidation rates for α-Fe and ɛ-Fe2N1−z become about equal, indicating that on both substrates the oxide growth is controlled by the same rate limiting step which is attributed to short-circuit diffusion of iron cations. Oxidizing ɛ-Fe2N1−z increases the nitrogen concentration in the remaining ɛ-iron nitride, because the outward flux of iron cations, necessary for oxide growth, leads to an accumulation of nitrogen atoms left behind.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 24
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 48 (1997), S. 201-214 
    ISSN: 1573-4889
    Keywords: titanium-aluminum alloys ; niobium ; intermetallics ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract In a recent study, CO2 has been reported to enhance the oxidation rate of binary titanium-aluminum alloys. The detrimental effect of CO2 was not, however, observed in a ternary alloy containing niobium. In this paper, possible explanations for these observations are examined. First, results from the literature regarding the effects of niobium in improving the resistance of titanium-aluminum alloys are briefly reviewed. Second, a thermodynamic analysis which offers a possible explanation for the beneficial effect of niobium in eliminating the CO2-enhanced oxidation of titanium-aluminum alloys is presented.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 25
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 48 (1997), S. 215-224 
    ISSN: 1573-4889
    Keywords: nanocrystallization ; oxidation ; mechanism
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Many mechanisms for the effect of reactive elements on the selective oxidation and scale adhesion of alloys have been proposed. However, nanocrystallization (or microcrystallization) has recently been found to have almost the same effect as that of reactive elements. This note reviews the effect of nanocrystallization on the selective oxidation and adhesion of Al2O3 scale with particular reference to the author's own results.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 26
    ISSN: 1573-4889
    Keywords: oxidation ; titanium ; rutile ; scale ; high temperature ; kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation behavior of pure titanium has been investigated in the temperature range of 1000 K to 1300 K in CO2 or Ar-10%CO2. Optical microscopy, electron probe microanalyses, and X-ray measurements on the oxide scales formed during oxidation indicate that their structures are nearly independent of temperature and the corrosion atmosphere. The scales consisted of two layers, an external one and an internal one, having a rutile (TiO2) structure. The parabolic rate law was confirmed for growth of the external scale and the permeation depth of oxygen in titanium with apparent activation energies of 266 and 226 kJ/mol, respectively. The rate-determining diffusion species in the oxidation processes are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 27
    ISSN: 1573-4889
    Keywords: zirconium ; X-ray diffraction ; oxidation ; phase analysis ; texture
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation of zirconium at high temperature (T〉 400°C) leads to reaction products of two allotropic oxide (ZrO2 monoclinic and ZrO2 tetragonal). The distribution and proportion of these two phases were studied as a function of time and space by X-ray diffraction techniques. Quantitative analyses are possible after some corrections, and we demonstrate the presence of a phase gradient in the oxide scale. The interest of this nondestructive method is then discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 28
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 48 (1997), S. 357-380 
    ISSN: 1573-4889
    Keywords: chromium ; copper ; binary alloys ; two-phase alloys ; oxidation ; high temperatures
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation in air of three two phase Cu-Cr alloys with nominal Cr contents of 25, 50, and 75 wt. % was studied at 700–900°C. The alloys corroded nearly parabolically, except at 900°C, when the corrosion rates decreased with time more rapidly than predicted by the parabolic rate law. The corrosion rate decreased for higher Cr contents in the alloy under constant temperature and generally increased with temperature for the same alloy composition. The scales were complex and consisted in most cases of an outermost copper oxide layer free from chromium and an inner layer composed of a matrix of copper oxide or of the double oxide Cu2Cr2O4, often containing particles of chromium metal surrounded by chromia and then by the double oxide. Metallic copper was also frequently mixed with chromia. Cr-rich regions tended to form continuous chromia layers at the base of the scale, especially at the highest temperature. No chromium depletion was observed in the alloy.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 29
    ISSN: 1573-4889
    Keywords: iron ; oxidation ; CeO2 coating ; in situ ; growth stress ; residual stress ; texture ; X ray diffraction
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract In situ XRD stress determinations have been performed during oxidation of pure iron (p(O2=2 × 10−3 Pa,T=800°C)). The compressive stress, initially present in the substrate due to surface preparation, is completely released at 400°C. Under the test conditions, the in situ compressive-stress level determined in the FeO scale during oxidation is not strongly dependent upon the presence of a ceria coating. On blank and coated specimens, the compressive stress varies from −400 ± 80 MPa to −150 ± 100 MPa during 30 hr oxidation. The decrease is quicker at the beginning of the test performed on blank specimens. Epitaxial relationships between the wüstite scale and iron (under low-pressure starting conditions) caused thein situ compressive stress in the oxide scale to be two times greater compared to the usual test conditions. This indicates that epitaxial relationships can be a source of stress in an oxide scale that ceria coatings may lower compressive stresses.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 30
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 48 (1997), S. 527-551 
    ISSN: 1573-4889
    Keywords: chloridation ; oxidation ; Fe-Cr alloys ; Ni-Cr alloys
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The chloridation-oxidation behavior of Fe-Cr (0–25 wt. %Cr) and Ni-Cr (0–20 wt.%Cr) alloys was studied at 800°C in three different H2-HCl-H2O(ν) environments. In a low-HCI and low-H2O(ν) environment, where Cr2O3 is thermodynamically stable, the corrosion resistance of the Fe-Cr alloys increased with increasing Cr content in the alloys. In a high-HCl and high-H2O(ν) environment, where FeCr2O4 is stable and CrCl2 is metastable, the corrosion resistance of the Fe-Cr alloys depended similarly on the Cr content. Low-Cr-Fe-Cr alloys exhibited large weight losses, while Fe-Cr alloys with higher than 19 wt. %Cr showed good corrosion resistance. In an environment of high-HCl in the absence of H2O(ν), the evaporative corrosion rate was fast and limited by gas phase diffusion, and independent of the Cr content in the Fe-Cr alloys. Ni and Ni-Cr alloys generally showed good corrosion resistance in the environments of high H2O(ν) because of the low NiCl2 vapor pressure and formation of a protective Cr2O3 scale. However, in the environment of high HCl in the absence of H2O(ν), selective formation and evaporation of CrCl2 occur, which results in Cr depletion and networks of voids for even a high-Cr Ni-Cr alloy.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 31
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 48 (1997), S. 553-596 
    ISSN: 1573-4889
    Keywords: chloridation ; oxidation ; HCl ; high-temperature alloys ; high-temperature corrosion
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Chloridation-oxidation studies of nine commercial high-temperature alloys were carried out at 800°C in three different H2-HCl-H2O(ν) environments: (A) both low HCl and H2O(ν) partial pressures, where either Cr2O3 or FeCr2O4 is stable, (B) both high HCl and H2O(ν) partial pressures, where FeCrO4 is stable and CrCl2 is metastable, and (C) high HCl partial pressure in the absence of H2O(ν), where either CrCl2 or Cr2O3 is stable. Although alloy 600 has the lowest Cr content of these nine alloys, it showed excellent corrosion resistance in all three environments because of its high Ni content. Alloy 304, with the lowest Ni content of the nine alloys, exhibited poor corrosion resistance in the environment C, fair resistance in the environment B and good resistance in the environment A. Alloy 800 showed very good resistance in Environment A, and fair corrosion resistance in Environment B; however, it suffered linear weight-loss kinetics when exposed to Environment C The alloys 617, 214, HR-160, X, 230 and 86 have good corrosion resistance in Environments A and B because of their relatively high contents of oxide-scale-forming elements Cr and/or Al. In Environment C, chlorine dramatically decreased the adhesion of the scale on the surface, and aluminum in alloys 617 and 214 hardly showed its usual beneficial effect in combating corrosion, nor does silicon in alloy HR-160. Different corrosion mechanisms are proposed for the alloys in the different environments.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 32
    ISSN: 1573-4889
    Keywords: binary alloys ; oxidation ; transient state ; kinetics
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The initial transient stage in the oxidation of binary alloys forming scales exclusively composed of the most stable oxide is examined by means of a simplified approach which avoids the numerical integration of the diffusion equation for the transport of the metal components in the alloy. At variance with previous solutions to this problem obtained by means of numerical methods, this treatment takes into account also the effect of the gas-scale reaction at the outer surface of the oxide. The concentration of the most-reactive component at the alloy surface changes gradually with time from the initial bulk value towards the corresponding steady-state value without involving any minimum, while the overall rate of the reaction presents a gradual transition from an initial nearly linear towards final parabolic behavior.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 33
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 247-258 
    ISSN: 1573-4889
    Keywords: Ni3Al-base alloy ; sputtering ; nanocrystalline coating ; oxidation ; scale adhesion
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract Isothermal and cyclic oxidation resistance at 1000°C in air were investigated for a cast Cr-containing Ni3Al-base alloy and its sputtered nanocrystalline coating. The results indicated that both the cast Ni3Al alloy and its sputtered coating exhibit excellent isothermal oxidation resistance as a result of the formation of Al2O3 scales. However, the cast alloy possesses very poor cyclic oxidation resistance because of the spallation of the initially formed Al2O3 scale during cooling and subsequent formation of NiO. On the contrary, the sputtered Ni3(AlCr) nanocrystalline coating exhibits very good cyclic oxidation resistance due to the significant improvement of the adhesion of Al2O3.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 34
    Electronic Resource
    Electronic Resource
    Springer
    Molecular and cellular biochemistry 177 (1997), S. 245-250 
    ISSN: 1573-4919
    Keywords: cataract ; crystalline ; glycation ; oxidation ; taurine
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology , Medicine
    Notes: Abstract Modifications in lens protein structure and function due to nonenzymic glycosylation and oxidation have been suggested to play a significant role in the pathogenesis of sugar and senile cataracts. The glycation reaction involves an initial Schiff base formation between the protein NH2 groups and the carbonyl group of a reducing sugar. The Schiff base then undergoes several structural modifications, via some oxidative reactions involving oxygen free radicals. Hence certain endogenous tissue components that may inhibit the formation of protein-sugar adduct formation may have a sparing effect against the cataractogenic effects of sugars and reactive oxygen. The eye lens is endowed with significant concentration of taurine, a sulfonated amino acid, and its precursor hypotaurine. It is hypothesized that taurine and hypotaurine may have this purported function of protecting the lens proteins against glycation and subsequent denaturation, in addition to their other functions. The results presented herein suggest that these compounds are indeed capable of protecting glycation competitively by forming Schiff bases with sugar carbonyls, and thereby preventing the glycation of lens proteins per se. In addition, they appear to prevent oxidative damage by scavenging hydroxyl radicals. This was apparent by their preventive effect against the formation of the thiobarbituric acid reactive material generated from deoxy-ribose, when the later was exposed to hydroxyl radicals generated by the action of xanthine oxidase on hypoxanthine in presence of iron.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 35
    Electronic Resource
    Electronic Resource
    Springer
    Journal of sol gel science and technology 8 (1997), S. 443-449 
    ISSN: 1573-4846
    Keywords: coatings ; protection of metals ; oxidation ; corrosion
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Sol-gel derived films can be deposited on metals to improve their resistance to oxidation and corrosion or to modify their surface properties. However, practical applications are limited by problems intrinsic to sol-gel processing or specific of coating/metal systems. Coatings aimed to improve oxidation and wet corrosion resistance have been the most studied. The results published in the literature show that sol-gel coatings may offer good protection against oxidation. More difficult is to achieve a protection against wet corrosion. An important aspect of the application of the sol-gel method for coating metallic objects is also the deposition technique.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 36
    Electronic Resource
    Electronic Resource
    Springer
    Journal of sol gel science and technology 8 (1997), S. 443-449 
    ISSN: 1573-4846
    Keywords: coatings ; protection of metals ; oxidation ; corrosion
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Sol-gel derived films can be deposited on metals to improve their resistance to oxidation and corrosion or to modify their surface properties. However, practical applications are limited by problems intrinsic to sol-gel processing or specific of coating/metal systems. Coatings aimed to improve oxidation and wet corrosion resistance have been the most studied. The results published in the literature show that sol-gel coatings may offer good protection against oxidation. More difficult is to achieve a protection against wet corrosion. An important aspect of the application of the sol-gel method for coating metallic objects is also the deposition technique.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 37
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 21-52 
    ISSN: 1573-4889
    Keywords: copper ; silver ; high temperature ; oxidation ; two-phase alloys
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The corrosion of three two phase Cu-Ag alloys containing 25, 50, and 75 wt% Ag has been studied at 650 and 750°C. In all cases the alloys formed external scales of copper oxides. At the same time, an internal precipitation of Cu2O within a silver matrix was also produced, with an oxide volume fraction larger for the alloys richer in Cu. Beneath this mixed layer a region of single-phase solid solution of Cu in silver formed for Cu-50Ag and especially for Cu-75Ag. Silver metal remained in the metal-consumption zone, acting essentially as an inert marker, except for a few particles with were incorporated into the growing scales. Both pure Cu and the alloys corroded parabolically, but the rate constants for the alloys decreased with increased Ag content under constant temperature. The various aspects of the corrosion of these alloys are examined by taking into account the possible effects associated with the presence of two metal phases.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 38
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 69-89 
    ISSN: 1573-4889
    Keywords: duplex-layer formation ; dynamic oxygen-diffusion path ; Ni-Cr alloy ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The results of an investigation of oxidation of a Ni-1 at.% Cr alloy are presented. Photolithographic marker experiments revealed that the markers were found to reside at the interface between a predominantly columnar outer NiO layer and a very fine grain inner layer of NiO, indicating that substantial oxygen ingress had occurred through the columnar scale. New oxide growth at the metal-oxide interface requires the oxidant to be transported across the oxide layer. Since the measured diffusion rate of oxygen ions along grain boundaries and through the lattice is much too slow to account for the observed microstructural growth (∼1: 1 ratio of inner and outer layers), it is necessary to postulate that the oxidant traverses the scale along some type of short-circuit path other than grain boundaries. Extensive formation of elongated pores and pipelike channels was observed along columnar oxide grain boundaries. Thus, it appears that the transport of oxygen occurs via voids (pores) formed by vacancy coalescence at the columnar grain boundaries. These pores appear to open and close continuously. Formation of new fine-grained oxide in these pores was observed to have sometimes completely resealed the void, suggesting a dynamic nature of the voids.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 39
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 139-203 
    ISSN: 1573-4889
    Keywords: oxidation ; MoSi2 ; TiSi2 ; air ; oxygen ; O and Si transport in SiO2
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The oxidation behavior of two MoSi2 variants, one Mo-rich and one Si-rich, and TiSi2 was investigated between 1000 and 1400°C in air, oxygen and an 80/20-Ar/O2 mixture. A protective SiO2 scale develops on MoSi2 in all atmospheres in the temperature range investigated. The SiO2 modification changes around 1300°C from tridymite to cristobalite. This change in SiO2 modification seems to cause an enhanced formation of SiO2 and evaporation of MoO3. The SiO2 grows at the MoSi2-scale interface. In air a two-layer scale grows on TiSi2 between about 1000 and 1200°C with an inner inwards growing fine-grain mixture of SiO2 + TiO2 and an outer outward-growing TiO2 partial layer. TiN formation in the transient oxidation is responsible for the formation of the inner mixed partial layer because in N -free atmospheres a scale of a SiO2 matrix with some Ti oxide precipitates inside is formed. A one-layer scale structure similar as that in N-free atmosphere is found on TiSi2 in air at T 〉 1200°C. In oxygen the TiO2 precipitates grow as needles mostly oriented perpendicular to the surface. Due to the faster oxygen transport in TiO2 compared with SiO2, these TiO2 needles act as “oxygen pipes,” causing an enhanced oxidation of TiSi2 in front of these needles. The SiO2 scale dissolves about 1–2% TiO2. This doping causes a mixed oxygenand Si transport with the consequence that the SiO2 scale on TiSi2 grows partly by oxygen transport inwards and Si transport outwards. The SiO2 modification is cristobalite over the entire temperature range investigated.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 40
    ISSN: 1573-4889
    Keywords: high temperature ; oxidation ; binary alloys ; steady-state
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The steady-state, high-temperature oxidation kinetics of single phase alloys rich in a most-reactive componentB in binaryA-B systems presenting a limited solubility of the two components (beta phase alloys) have been examined assuming the exclusive formation of the most-stable oxideBO v. Alloys sufficiently rich inB can form externalBO v scales directly in contact with the beta phase, while below a criticalB content the growth ofBO v involves also the appearance of an intermediate layer ofB-depleted solid solution ofB inA (alpha phase). The parabolic rate constants for the oxidation of single-phase beta alloys are lower than those of alloys of identicalB content which are single-phase over the whole range of composition (solid-solution alloys) but higher than for two-phase alpha + beta alloys under the same values of all the relevant parameters. Moreover, the tendency of single-phase beta alloys to form the most-stable oxide simultaneously as an external scale and internally to the alloy is greater than for solid-solution alloys but smaller than for two-phase alloys.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 41
    Electronic Resource
    Electronic Resource
    Springer
    Oxidation of metals 47 (1997), S. 259-275 
    ISSN: 1573-4889
    Keywords: laser surface alloying ; aluminum ; superalloys ; oxidation ; microstructure
    Source: Springer Online Journal Archives 1860-2000
    Topics: Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics
    Notes: Abstract The high-temperature oxidation resistance of laser-surface-alloyed Incoloy 800H with Al has been investigated. Several samples have been exposed to 1000°C in air and subsequently analyzed by optical microscopy, SEM, and electron microprobe X-ray fluorescence spectroscopy in order to determine their microstructure and composition. The results show that the laser-treated materials have a considerably higher oxidation resistance than the nontreated materials due to the formation of an Al-rich layer close to the surface, which acts as a barrier against oxygen diffusion into the bulk.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 42
    Electronic Resource
    Electronic Resource
    Springer
    Bioscience reports 17 (1997), S. 521-527 
    ISSN: 1573-4935
    Keywords: Glyceraldehyde-3-phosphate dehydrogenase ; glycolysis ; oxidation ; uncoupling ; thiols ; hydrogen peroxide ; mitochondria
    Source: Springer Online Journal Archives 1860-2000
    Topics: Biology , Chemistry and Pharmacology
    Notes: Abstract Data on alterations of the properties of glyceraldehyde-3-phosphate dehydrogenase upon oxidation of its functional groups are reviewed; a mechanism of uncoupling of oxidation and phosphorylation in glycolysis is considered. Possible ways of regulating uncoupling, and the physiological importance of this process, are discussed.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 43
    Electronic Resource
    Electronic Resource
    Springer
    Environmental geochemistry and health 19 (1997), S. 155-164 
    ISSN: 1573-2983
    Keywords: geochemistry ; metals ; sulphide sediment ; oxidation ; acidification
    Source: Springer Online Journal Archives 1860-2000
    Topics: Geosciences , Medicine
    Notes: Abstract The geochemistry, mineralogy, acidity and electric conductivity of sulphide-bearing postglacial sediments located on the coastal plains of western Finland were studied. Grain size and mineralogical analysis (eight samples studied) indicated that the sediments are silts dominated by primary minerals (quartz, feldspars), and that the clay fraction (〈2µm), which made up less than one-third of the bulk samples, is enriched in phyllosilicates but depleted in quartz and feldspars, relative to bulk samples. As compared to the metal contents of the fine-fraction of glacial till (data of the Geological Survey of Finland), the fine sediments appear to be enriched in sulphur (median = 0.54%) and trace metals such as Ni (31 µg g−1), Zn (90 µg g−1), Co (13 µg g−1), Cr (48 µg g−1) and V (50 µg g−1). Statistical analysis indicated that aluminosilicates are the principal carrier phases of trace metals, and that sulphides and organic matter only partially control the distribution of elements other than S and C. A 3-g portion of 232 samples was oxidised in the laboratory by atmospheric oxygen for a period of 1 year. After this period of oxidation, 15 ml of water was added, after which pH and electric conductivity of the suspensions (sediment:water, 1:5) were measured. The quantities of elements mobilised by the oxidation was calculated from the dissolved concentrations found in 3 g of oxidised sediment suspended in 30 ml of deionised water (eight samples studied). The results of the experiment showed that the impact of sulphide oxidation on the pH and conductivity of the sediments is large, and that a high proportion (〉13%) of the aqua-regia extractable contents of several elements (Co, Mn, Ca, Ni, Zn, Sr, Na and B) are mobilised at oxidation. Because of the high quantities of acidity and metals liberated at oxidation, it is argued that stream-water quality, which is poor in the study area, will not improve unless artificial draining is restricted in areas of sulphide sediments.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 44
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 62 (1997), S. 117-120 
    ISSN: 1588-2837
    Keywords: m-xylene ; oxidation ; gas-phase
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract The gas-phase oxidation ofm-xylene on catalysts for partial hydrocarbon oxidation (Bi−Fe−Co−Ni−Mo−P−O, V−Sb−O and V−Ti−O) has been studied at 325–400°C. 3-Methylbenzaldehyde (for the first two catalysts), or both 3-methylbenzaldehyde and 3-methylbenzoic acid (for the last one) were shown to be the main partial oxidation products.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 45
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 62 (1997), S. 185-190 
    ISSN: 1588-2837
    Keywords: Methane ; oxidation ; La1−xSrxCoO3
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Methane oxidation over perovskite oxide (La1−xSrxCoO3) were investigated under rich oxygen circumstance. The large x in oxide or the higher temperature will promote the lattice oxygen to participate in the reaction. The relative adsorption properties of catalyst and reaction kinetic were also studied.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 46
    ISSN: 1588-2837
    Keywords: Perovskite ; defect structure ; carbon monoxide ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract For a perovskite system La0.7Sr0.3Co1-xFexO3, the effect of partial substitution of Co by Fe on the particle microstructure and chemical composition of the surface layer has been studied. Iron incorporation was found to cause a structure rearrangement from the hexagonal (at x〈0.05) to the cubic (atx〉0.05) type, which was not accompanied by any appreciable variation of the surface layer composition. A transient sample with x=0.05 was characterized by a high degree of misorientation of microblocks and had the highest activity in the CO catalytic oxidation.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 47
    Electronic Resource
    Electronic Resource
    Springer
    Reaction kinetics and catalysis letters 60 (1997), S. 387-394 
    ISSN: 1588-2837
    Keywords: Perborate ; iodide ; zirconium(IV) ; catalysis ; oxidation
    Source: Springer Online Journal Archives 1860-2000
    Topics: Chemistry and Pharmacology
    Notes: Abstract Zirconium(IV) catalyzes perborate oxidation of iodide ion. In acidic solution the oxidation is zero order with respect to perborate, first order with respect to Zr(IV), independent of [H+] and exhibits Michaelis-Menten dependence on [I−]. Mechanistic pathway of the catalysis is discussed and a rate equation is derived.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...