ALBERT

Description: The paper describes algorithms for rain-rate profiling with an airborne or space-borne radar. Some problems involved in the radar measurements from an airborne or space-borne platform are discussed. An outline of a dual-frequency algorithm is described and its performance is confirmed by a computer simulation and an airborne experiment. A single-frequency algorithm is developed by introducing a path-integrated rain rate estimated from an attenuation of surface echoes or from microwave brightness temperature. The computer simulation shows good performance for an airborne or space-borne radar.

Description: The International Ultraviolet Explorer has been successfully operated as a real time user-interactive space observatory for twelve years. It is expected to continue operation for up to five additional years, but under increasing constraints. The option to operate IUE in a more automated, non user-interactive mode is under consideration. A sophisticated software system to support such an operation is a clear requirement. The conceptual framework of such a system is described. Results of a preliminary tests are presented for which a hypothetical four day schedule of space-craft activities at a time resolutions as low as ten minutes was generated.

Description: The optimal topology of a two dimensional linear elastic body can be computed by regarding the body as a domain of the plane with a high density of material. Such an optimal topology can then be used as the basis for a shape optimization method that computes the optimal form of the boundary curves of the body. This results in an efficient and reliable design tool, which can be implemented via common FEM mesh generator and CAD type input-output facilities.

Description: A new method for the solution of non-linear mathematical programming problems in the field of structural optimization is presented. It is an iterative scheme which for each iteration refines the approximation of objective and constraint functions by accumulating the function values of previously visited design points. The method has proven to be competitive for a number of well-known examples of which one is presented here. Furthermore because of the accumulation strategy, the method produces convergence even when the sensitivity analysis is inaccurate.

Description: The adoption of robust numerical optimization techniques in trajectory simulation programs has resulted in powerful design and analysis tools. These trajectory simulation/optimization programs are widely used, and a representative list includes the GTS system, the POST program, and newer collocation methods such as OTIS and FONPAC. All of these programs rely on optimization algorithms which require objective function and constraint gradient data during the iteration process. However, most trajectory optimization problems lack simple analytical expressions for these derivatives. In the general case a function evaluation involves integrating aerodynamic, propulsive, and gravity forces over multiple trajectory phases with complex control models. With the newer collocation methods, the integration is replaced by defect constraints and cubic approximations for the state. While analytic gradient expressions can sometimes be derived for trajectory optimization problems, the derivation is cumbersome, time consuming, and prone to mistakes. Fortunately, an alternate method exists for the gradient evaluation, namely finite difference approximations. In this paper some finite difference gradient techniques developed for use with the GTS system are presented. These techniques include methods for computing first and second partial derivatives of single and multiple sets of functions. A key feature of these methods is an error control mechanism which automatically adjusts the perturbation size to obtain accurate derivative values.

Description: Originally, computer programs for engineering design focused on detailed geometric design. Later, computer programs for algorithmically performing the preliminary design of specific well-defined classes of objects became commonplace. However, due to the need for extreme flexibility, it appears unlikely that conventional programming techniques will prove fruitful in developing computer aids for engineering conceptual design. The use of symbolic processing techniques, such as object-oriented programming and constraint propagation, facilitate such flexibility. Object-oriented programming allows programs to be organized around the objects and behavior to be simulated, rather than around fixed sequences of function- and subroutine-calls. Constraint propagation allows declarative statements to be understood as designating multi-directional mathematical relationships among all the variables of an equation, rather than as unidirectional assignments to the variable on the left-hand side of the equation, as in conventional computer programs. The research has concentrated on applying these two techniques to the development of a general-purpose computer aid for engineering conceptual design. Object-oriented programming techniques are utilized to implement a user-extensible database of design components. The mathematical relationships which model both geometry and physics of these components are managed via constraint propagation. In addition, to this component-based hierarchy, special-purpose data structures are provided for describing component interactions and supporting state-dependent parameters. In order to investigate the utility of this approach, a number of sample design problems from the field of aerospace engineering were implemented using the prototype design tool, Rubber Airplane. The additional level of organizational structure obtained by representing design knowledge in terms of components is observed to provide greater convenience to the program user, and to result in a database of engineering information which is easier both to maintain and to extend.

Description: A computer code, HITCAN (High Temperature Composite Analyzer) was developed to analyze/design metal matrix composite structures. HITCAN is based on composite mechanics theories and computer codes developed at NASA LeRC over the last two decades. HITCAN is a general purpose code for predicting the global structural and local stress-strain response of multilayered (arbitrarily oriented) metal matrix structures both at the constituent (fiber, matrix, and interphase) and the structure level and including the fabrication process effects. The thermomechanical properties of the constituents are considered to be nonlinearly dependent on several parameters including temperature, stress, and stress rate. The computational procedure employs an incremental iterative nonlinear approach utilizing a multifactor-interaction material behavior model. HITCAN features and analysis capabilities (static, load stepping, modal, and buckling) are demonstrated through typical example problems.

Description: This document presents in viewgraph form techniques for the optimal design of aerospace vehicles which take into account vehicle shape, aerodynamic performance, and weight minimization. Methods include multilevel optimization with linear decomposition, multi-constraint optimization, global sensitivity matrix, and calculation of sensitivity derivatives using both first and second order derivatives. The effects of including flexibility in the optimization is discussed.

Description: Future utilization of space will require large space structures in low-Earth and geostationary orbits. Example missions include: Earth observation systems, personal communication systems, space science missions, space processing facilities, etc., requiring large antennas, platforms, and solar arrays. The dimensions of such structures will range from a few meters to possibly hundreds of meters. For reducing the cost of construction, launching, and operating (e.g., energy required for reboosting and control), it will be necessary to make the structure as light as possible. However, reducing structural mass tends to increase the flexibility which would make it more difficult to control with the specified precision in attitude and shape. Therefore, there is a need to develop a methodology for designing space structures which are optimal with respect to both structural design and control design. In the current spacecraft design practice, it is customary to first perform the structural design and then the controller design. However, the structural design and the control design problems are substantially coupled and must be considered concurrently in order to obtain a truly optimal spacecraft design. For example, let C denote the set of the 'control' design variables (e.g., controller gains), and L the set of the 'structural' design variables (e.g., member sizes). If a structural member thickness is changed, the dynamics would change which would then change the control law and the actuator mass. That would, in turn, change the structural model. Thus, the sets C and L depend on each other. Future space structures can be roughly divided into four mission classes. Class 1 missions include flexible spacecraft with no articulated appendages which require fine attitude pointing and vibration suppression (e.g., large space antennas). Class 2 missions consist of flexible spacecraft with articulated multiple payloads, where the requirement is to fine-point the spacecraft and each individual payload while suppressing the elastic motion. Class 3 missions include rapid slewing of spacecraft without appendages, while Class 4 missions include general nonlinear motion of a flexible spacecraft with articulated appendages and robot arms. Class 1 and 2 missions represent linear mathematical modeling and control system design problems (except for actuator and sensor nonlinearities), while Class 3 and 4 missions represent nonlinear problems. The development of an integrated controls/structures design approach for Class 1 missions is addressed. The performance for these missions is usually specified in terms of (1) root mean square (RMS) pointing errors at different locations on the structure, and (2) the rate of decay of the transient response. Both of these performance measures include the contributions of rigid as well as elastic motion.

Description: A fundamental problem facing controls-structures analysts is a means of determining the trade-offs between structural design parameters and control design parameters in meeting some particular performance criteria. Developing a general optimization-based design methodology integrating the disciplines of structural dynamics and controls is a logical approach. The objective of this study is to develop such a method. Classical design methodology involves three phases. The first is structural optimization, wherein structural member sizes are varied to minimize structural mass, subject to open-loop frequency constraints. The next phase integrates control and structure design with control gains as additional design variables. The final phase is analysis of the 'optimal' integrated design phase considering 'real' actuators and 'standard' member sizes. The control gains could be further optimized for fixed structure, and actuator saturation constraints could be imposed. However, such an approach does not take full advantage of opportunities to tailor the structure and control system design as one system.

Description: One well known deficiency of LQG compensators is that they do not guarantee any measure of robustness. This deficiency is especially highlighted when considering control design for complex systems such as flexible structures. There has thus been a need to generalize LQG theory to incorporate robustness constraints. Here we describe the maximum entropy approach to robust control design for flexible structures, a generalization of LQG theory, pioneered by Hyland, which has proved useful in practice. The design equations consist of a set of coupled Riccati and Lyapunov equations. A homotopy algorithm that is used to solve these design equations is presented.

Description: The general problem of optimization with arbitrary merit and constraint functions, which could be convex, concave, monotonic, or non-monotonic, is treated using stochastic methods. To improve the efficiency of the random search methods, a genetic algorithm for the search phase and a discriminant function for the constraint-control phase were utilized. The validity of the technique is demonstrated by comparing the results to published test problem results. Numerical experimentation indicated that for cases where a quick near optimum solution is desired, a general, user-friendly optimization code can be developed without serious penalties in both total computer time and accuracy.

Description: Structural optimization has attracted the attention since the days of Galileo. Olhoff and Taylor have produced an excellent overview of the classical research within this field. However, the interest in structural optimization has increased greatly during the last decade due to the advent of reliable general numerical analysis methods and the computer power necessary to use them efficiently. This has created the possibility of developing general numerical systems for shape optimization. Several authors, eg., Esping; Braibant & Fleury; Bennet & Botkin; Botkin, Yang, and Bennet; and Stanton have published practical and successful applications of general optimization systems. Ding and Homlein have produced extensive overviews of available systems. Furthermore, a number of commercial optimization systems based on well-established finite element codes have been introduced. Systems like ANSYS, IDEAS, OASIS, and NISAOPT are widely known examples. In parallel to this development, the technology of computer aided design (CAD) has gained a large influence on the design process of mechanical engineering. The CAD technology has already lived through a rapid development driven by the drastically growing capabilities of digital computers. However, the systems of today are still considered as being only the first generation of a long row of computer integrated manufacturing (CIM) systems. These systems to come will offer an integrated environment for design, analysis, and fabrication of products of almost any character. Thus, the CAD system could be regarded as simply a database for geometrical information equipped with a number of tools with the purpose of helping the user in the design process. Among these tools are facilities for structural analysis and optimization as well as present standard CAD features like drawing, modeling, and visualization tools. The state of the art of structural optimization is that a large amount of mathematical and mechanical techniques are available for the solution of single problems. By implementing collections of the available techniques into general software systems, operational environments for structural optimization have been created. The forthcoming years must bring solutions to the problem of integrating such systems into more general design environments. The result of this work should be CAD systems for rational design in which structural optimization is one important design tool among many others.

Description: Previous work in three dimensional shape optimization involved specifying design variables by associating parameters directly with mesh points. More recent work has shown the use of fully-automatic mesh generation based upon a parameterized geometric representation. Design variables have been associated with a mathematical model of the part rather than the discretized representation. The mesh generation procedure uses a nonuniform grid intersection technique to place nodal points directly on the surface geometry. Although there exists an associativity between the mesh and the geometrical/topological entities, there is no mathematical functional relationship. This poses a problem during certain steps in the optimization process in which geometry modification is required. For the large geometrical changes which occur at the beginning of each optimization step, a completely new mesh is created. However, for gradient calculations many small changes must be made and it would be too costly to regenerate the mesh for each design variable perturbation. For that reason, a local remeshing procedure has been implemented which operates only on the specific edges and faces associated with the design variable being perturbed. Two realistic design problems are presented which show the efficiency of this process and test the accuracy of the gradient computations.

Description: We present a quasi-Newton interior points algorithm for nonlinear constrained optimization. It is based on a general approach consisting of the iterative solution in the primal and dual spaces of the equalities in Karush-Kuhn-Tucker optimality conditions. This is done in such a way to have primal and dual feasibility at each iteration, which ensures satisfaction of those optimality conditions at the limit points. This approach is very strong and efficient, since at each iteration it only requires the solution of two linear systems with the same matrix, instead of quadratic programming subproblems. It is also particularly appropriate for engineering design optimization inasmuch at each iteration a feasible design is obtained. The present algorithm uses a quasi-Newton approximation of the second derivative of the Lagrangian function in order to have superlinear asymptotic convergence. We discuss theoretical aspects of the algorithm and its computer implementation.

Description: Performance optimization for upper-stage exoatmospheric vehicles often is performed within the framework of a full capability trajectory simulation package requiring either a large mainframe computer or powerful work-station. Since these software packages tend to include capabilities providing for high-fidelity boost and reentry simulations, the programs usually are quite large and not very portable. The program TROJID is an attempt to provide an environment for the optimization of upper-stage trajectories within a small package capable of being run on a standard desktop microcomputer. Utilizing a state-of-the-art nonlinear programming algorithm and a trajectory simulator implementing impulsive burns and an analytic coast phase propagator, TROJID is capable of producing trajectories for optimal multi-burn upper-stage orbit transfers. The package has been designed to allow full generality in definition of both the trajectory simulator and the parameter optimization problem.

Description: The author has developed several general purpose optimization programs over the past twenty years. The earlier programs were developed as research codes and served that purpose reasonably well. However, in taking the formal step from research to industrial application programs, several important lessons have been learned. Among these are the importance of clear documentation, immediate user support, and consistent maintenance. Most important has been the issue of providing software that gives a good, or at least acceptable, design at minimum computational cost. Here, the basic issues developing optimization software for industrial applications are outlined and issues of convergence rate, reliability, and relative minima are discussed. Considerable feedback has been received from users, and new software is being developed to respond to identified needs. The basic capabilities of this software are outlined. A major motivation for the development of commercial grade software is ease of use and flexibility, and these issues are discussed with reference to general multidisciplinary applications. It is concluded that design productivity can be significantly enhanced by the more widespread use of optimization as an everyday design tool.

Description: The JPL Control/Structure Interaction Program is developing new analytical methods for designing micro-precision spacecraft with controlled structures. One of these, the Conceptual Design Tool, will illustrate innovative new approaches to the integration of multi-disciplinary analysis and design methods. The tool will be used to demonstrate homogeneity of presentation, uniform data representation across analytical methods, and integrated systems modeling. The tool differs from current 'integrated systems' that support design teams most notably in its support for the new CSI multi-disciplinary engineer. The design tool will utilize a three dimensional solid model of the spacecraft under design as the central data organization metaphor. Various analytical methods, such as finite element structural analysis, control system analysis, and mechanical configuration layout, will store and retrieve data from a hierarchical, object oriented data structure that supports assemblies of components with associated data and algorithms. In addition to managing numerical model data, the tool will assist the designer in organizing, stating, and tracking system requirements.

Description: Element-by-element preconditioned conjugate gradient (EBE-PCG) algorithms have been advocated for use in parallel/vector processing environments as being superior to the conventional LDL(exp T) decomposition algorithm for single load cases. Although there may be some advantages in using such algorithms for a single load case, when it comes to situations involving multiple load cases, the LDL(exp T) decomposition algorithm would appear to be decidedly more cost-effective. The authors have outlined an EBE-PCG algorithm suitable for multiple load cases and compared its effectiveness to the highly efficient LDL(exp T) decomposition scheme. The proposed algorithm offers almost no advantages over the LDL(exp T) algorithm for the linear problems investigated on the Alliant FX/8. However, there may be some merit in the algorithm in solving nonlinear problems with load incrementation, but that remains to be investigated.

Description: The design of complex engineering systems such as aircraft, automobiles, and computers is primarily a cooperative multidisciplinary design process involving interactions between several design agents. The common thread underlying this multidisciplinary design activity is the information exchange between the various groups and disciplines. The integrating component in such environments is the common data and the dependencies that exist between such data. This may be contrasted to classical multidisciplinary analyses problems where there is coupling between distinct design parameters. For example, they may be expressed as mathematically coupled relationships between aerodynamic and structural interactions in aircraft structures, between thermal and structural interactions in nuclear plants, and between control considerations and structural interactions in flexible robots. These relationships provide analytical based frameworks leading to optimization problem formulations. However, in multidisciplinary design problems, information based interactions become more critical. Many times, the relationships between different design parameters are not amenable to analytical characterization. Under such circumstances, information based interactions will provide the best integration paradigm, i.e., there is a need to model the data entities and their dependencies between design parameters originating from different design agents. The modeling of such data interactions and dependencies forms the basis for integrating the various design agents.

Description: An algorithm for solving constrained optimization problems is presented. First, design of experiment techniques are used to survey the design space. After evaluating the objective and constraint functions, as specified by Taguchi orthogonal arrays, analytical models of these functions are generated using a least-squares regression analysis. Next, a nonlinear programming package is used to optimize the analytical model. Based on the optimization information, the design space is reduced so as to close in around the minimum, and the entire procedure is repeated until convergence. An important feature of the algorithm is that function gradients are not required; therefore, for problems in which gradients would have to be estimated using finite-differences the number of function evaluations required for the optimization is significantly reduced, when compared with traditional nonlinear programming techniques. In addition, there is no requirement that the gradients must be smooth and continuous.

Description: This viewgraph presentation represents the first effort at defining the successor to DYCAM 1.0, which is the Center for Space Construction's Dynamic Construction Activities Model, Version 1.0. Version 1.0 is currently nearing the completion of its development phase, and now that its capabilities can be discerned, it is possible to envision the next step in computer aided engineering constructability analysis tools. The presentation is a discussion of the 'wish list' for future DYCAM versions, tempered by reality, yet at the same time intrigued by the importance of modeling the space construction problems. This discussion of DYCAM 2.0's proposed capabilities remains a 'living document' in that on-going research by the author and others may cause changes to the approach as well as to the architecture of Version 1.0. Similarly, as CSC gains experience with Version 1.0, one would expect to gain insight as to the positives and negatives of its general construction planning approach.

Description: This document presents block diagrams of the IDEAS**2 computing environment. IDEAS**2 is the computing environment selected for system engineering (design and analysis) by the Center for Space Construction (CSC) at the University of Colorado (UCB). It is intended to support integration and analysis of any engineering system and at any level of development, from Pre-Phase A conceptual studies to fully mature Phase C/D projects. The University of Colorado (through the Center for Space Construction) has joined the Structural Dynamics Research Corporation (SDRC) University Consortium which makes available unlimited software licenses for instructional purposes. In addition to providing the backbone for the implementation of the IDEAS**2 computing environment, I-DEAS can be used as a stand-alone product for undergraduate CAD/CAE instruction. Presently, SDRC is in the process of releasing I-DEAS level 5.0 which represents a substantial improvement in both the user interface and graphic processing capabilities. IDEAS**2 will be immediately useful for a number of current programs within CSC (such as DYCAM and the 'interruptability problem'). In the future, the following expansions of the basic IDEAS**2 program will be pursued, consistent with the overall objectives of the Center and of the College: upgrade I-DEAS and IDEAS**2 to level 5.0; create new analytical programs for applications not limited to orbital platforms; research the semantic organization of engineering databases; and create an 'interoperability' testbed.

Description: Those who plan the construction of large structures in space are presented with new challenges imposed by the constraints involved in such an operation. These constraints include those imposed by the assembly sequence itself; the available resources of time, money, manpower, equipment, and material; and finally those constraints imposed by the physical nature of the environment. Design decisions ultimately affect the construction effort and inherent construction constraints affect the design. To enhance the constructability of these structures, it is important that the project planners be equipped with computer tools which will allow a rapid iterative analysis of many possible scenarios for design and construction. DYCAM 1.0 provides the user with a computer tool to aid in the evaluation of Pre-Phase A and Phase A conceptual system designs and the identification of feasible construction scenarios for these designs assuming various types and levels of construction technologies. The DYCAM 1.0 model interacts with a NASA utilized, commercially available computer model for conceptual system design, called IDEAS**2. DYCAM 1.0 incorporates the consideration of construction constraints as specified by the mission planner/system designer. This permits iteration of the system design with various construction sequences suggested by the user. The DYCAM 1.0 test case evaluates various construction sequences using IDEAS**2 data for the configuration of Space Station Freedom after two assembly flights. This document contains a series of viewgraphs demonstrating the DYCAM 1.0 design analysis environment.

Description: Ever since the United States space program started some forty years ago, there have been many ideas on how the U.S. should proceed to explore space. Throughout the years, many innovative designs have surfaced for transfer vehicles, space stations, and surface bases. Usually the difference in designs are due to differences in mission objectives and requirements. The problem for Mars is how to choose an architecture for human travel to Mars and what kind of base construction to design for Mars that will be reliable and cost effective. Eventually, if the Space Exploration Initiative is to become a reality, NASA will have to select and fund a single mission architecture involving manned and unmanned Mars fly-by precursors, a Mars landing vehicle, and, ultimately, the plan for constructing a Mars base. The decision to commit to a single architecture is a vital one and, therefore, the design issues, the decision making process, and the analysis tools must be available to explore all of the options that are available. A large part of any space mission architecture is the Earth-to-Mars transfer vehicle. The decision on the type of transfer vehicle to design is a crucial one. The many options must take into account the constraints encountered when assembling the vehicle in earth orbit such as effective joining methods, test and evaluation methods, preventative maintenance measures, etc. Therefore, the process of trading off various designs must include every facet of that design. The on-orbit assembly/construction constraints will drive designs and architectures. This viewgraph presentation highlights the above critical issues so that designs may be evaluated from these viewpoints. Evaluating designs from the issues contained in this paper will help decision makers detect inadequate designs. Stressing these issues in the evaluation procedure will have a great impact on the decisions of future space mission transfer vehicles and consequent architectures.

Description: A cooperative United States/Japan study was made for one year from 1987 to 1988 regarding the feasibility of the Tropical Rainfall Measuring Mission (TRMM). As part of this study a phase-A-level design of spacecraft for TRMM was developed by NASA/GSFC, and the result was documented in a feasibility study. The phase-A-level design is developed for the TRMM satellite utilizing a multimission spacecraft.

Description: A spacecraft-shielding technique is investigated in which the geometrical configuration and material used are emphasized. Ultrathin spaced shield elements are employed to repeatedly shock the impacting projectile to a high energy state that causes melting and vaporization. The ratio of the thickness of the elements to projectile diameter corresponds to a relatively small percentage of debris-plume mass that can be withstood by the backsheet. The strength of the backsheet is thereby reduced and employed in a specific configuration that prevents the debris plume from destroying successive sheets before the particulates reach the sheet. The primary benefit is weight reduction of 30 percent when compared to a 'Whipple shield' fabricated with the same material. The concept is shown to be effective against all impact types tested and produces minimal secondary debris.

Description: Compressible Euler equations are solved for two-dimensional problems by a preconditioned conjugate gradient-like technique. An approximate Riemann solver is used to compute the numerical fluxes to second order accuracy in space. Two ways to achieve parallelism are tested, one which makes use of parallelism inherent in triangular solves and the other which employs domain decomposition techniques. The vectorization/parallelism in triangular solves is realized by the use of a recording technique called wavefront ordering. This process involves the interpretation of the triangular matrix as a directed graph and the analysis of the data dependencies. It is noted that the factorization can also be done in parallel with the wave front ordering. The performances of two ways of partitioning the domain, strips and slabs, are compared. Results on Cray YMP are reported for an inviscid transonic test case. The performances of linear algebra kernels are also reported.

Description: Averaging methods are applied to analyzing the transient response associated with adaptive control of large space structures. Using a dominant mode approximation to the plant, an analytical bound is found on the envelope of the adaptive response, characterizing many of the features of the response useful for control design (e.g., peak values, quadratic costs, settling times, etc.). An optimal adaptive design problem is formulated based on minimizing the product of the settling time and peak torque requirement. The resulting nonlinear constrained optimization problem is solved in closed form, and several properties of the optimal adaptive design are discussed.

Description: An approach to the integrated design of linear controlled structures, which is being investigated as part of NASA's controlled structures interaction (CSI) methodology development program, is presented. The approach is integrated in the sense that the structure and its controller are simultaneously designed. The design methodology uses constrained nonlinear optimization procedures based on analytically obtained gradients of the structural responses. Design of the controller is based on the so-called Q-parameterization theory, which parameterizes all closed-loop input/output maps achievable with stabiizing linear controllers. Very general objective and constraint functions are possible, and structural shape can be included in the design variables. This method has been partially implemented and demonstrated; early findings are reported.

Description: The problem of controller design for flexible spacecraft is addressed. Model-based compensators, which rely on the knowledge of the system parameters to tune the state estimator, are considered. The instability mechanisms resulting from high sensitivity to parameter uncertainties are investigated. Dissipative controllers, which use collocated actuators and sensors, are also considered, and the robustness properties of constant-gain dissipative controllers in the presence of unmodeled elastic-mode dynamics, sensor/actuator nonlinearities, and actuator dynamics are summarized. In order to improve the performance without sacrificing robustness, a class of dissipative dynamic compensators is proposed and is shown to retain robust stability in the presence of second-order actuator dynamics if acceleration feedback is employed. A class of dissipative dynamic controllers is proposed which consists of a low-authority, constant-gain controller and a high-authority dynamic compensator. A procedure for designing an optimal dissipative dynamic compensator is given which minimizes a quadratic performance criterion. Such compensators offer the promise of better performance while still retaining robust stability.

Description: A simple single-axis testbed is described, and initial experimental results are presented to illustrate collocated and noncollocated control for this structure. The testbed is made up of a pair of single-axis flexible beams attached to a DC servo motor. An optical encoder and strain gauges provide hub and beam position information, respectively. The system is driven by an IBM PC system; with a motor controller, a programmable digital filter processes position error information through user-selected gains and pole-zero configurations. A 25-kHz data acquisition system provides the necessary interface between processor and motor. The control approaches currently being investigated include collocated PD control and noncollocated phase compensation.

Description: Experience with the application of positivity designed multivariable controllers for the NASA ACES flexible beam experiment is discussed. Multivariable controllers were designed using sets of rotational sensors/actuators (rate gyros/torque actuators) and linear sensors/actuators (accelerometers/LMEDs). Experience with this set of controllers demonstrated the difficulty of designing controllers with significant modal uncertainty and significant phase uncertainty. With the aid of multivariable scaling techniques these designs were ultimately able to achieve a high level of closed-loop damping.

Description: Control system design and closed-loop test results for the Mini-Mast truss structure located at the NASA Langley Research Center are presented. The simplicity and effectiveness of a classical control approach to the active structural control design are demonstrated by ground experiments. The concepts of robust nonminimum phase compensation and periodic disturbance rejection are also experimentally validated. The practicality of a sensor output decoupling approach is demonstrated for the inherent, multivariable control problem of the Mini-Mast.

Description: A control algorithm for satellite stabilization using a space leech is presented. The space leech is assumed to have n reaction wheels with known moments of inertia about their axis of rotation. All mass properties of the satellite are assumed to be unknown. The algorithm brings the satellite to a specified attitude trajectory. Simulations were performed to demonstrate the controller. The model parameters and specific algorithm used and the results obtained are presented.

Description: A computational method for the simulation of damage and fracture propagation in laminated composites is presented. A quantitative evaluation of the global fracture toughness of composites is shown as a tool for monitoring the fracture stability of composites under sustained loading. Changes in overall structural properties such as natural frequencies and the fundamental buckling load are also computed with increasing load-induced damage. Structural degradation, delamination, fracture, and damage propagation are included in the simulation. An angle-plied composite plate structure subjected to inplane tensile loading is used as an example to demonstrate some of the feature of the computational method.

Description: A method is presented for calculating the three orthogonal components of the velocity perturbations of satellite fragments, with a view to ascertaining the nature and intensity of the satellite breakup. The method employs three simultaneous equations furnished by changes in fragment specific energy, specific angular momentum, and plane orientation. Velocity perturbations are thereby calculated for fragments from 20 major satellite breakup events; these results, in conjunction with a technique for determining fragment masses, yield a description of the breakup process.

Description: All spacecraft are susceptible to impacts by meteoroids and pieces of orbiting space debris. An effective mechanism is developed to protect external spacecraft subsystems against damage by ricochet particles formed during such impacts. Equations and design procedures for protective shield panels are developed based on observed ricochet phenomena and calculated ricochet particle sizes and speeds. It is found that the diameter of the most damaging ricochet debris particle can be as large as 40 percent of the original project tile diameter, and can travel at speeds between 24 and 36 percent of the original projectile impact velocity. Panel dimensions are shown to be strongly dependent on their inclination to the impact velocity vector and on their distribution around a spacecraft module. It is concluded that obliquity effects of high-speed impacts must be considered in the design of any structure exposed to the meteoroid and space debris environment.

Description: The combination of a sun sensor called a sun gate (SG) and a digital programmable signal processor on the Galileo spacecraft attitude and articulation control subsystem (AACS) will orient the rotation axis of the spacecraft toward the sun to satisfy a new requirement imposed by the new spacecraft trajectory. The combination will continuously monitor the pointing direction of the rotation axis, and any off-sun excursions of more than a preset threshold will be detected, triggering appropriate actions by the flight software to prevent off-sun cone angles of more than 14 deg. The design of the SG is described in detail, its principle of operation is given, and the flight software processing of the SG output is discussed.

Description: A series of studies aimed at characterizing the fundamentals of the software failure process has been undertaken as part of a NASA project on the modeling of a real-time aerospace vehicle software reliability. An overview of these studies is provided, and the current study, an investigation of the reliability of aerospace vehicle guidance and control software, is examined. The study approach provides for the collection of life-cycle process data, and for the retention and evaluation of interim software life-cycle products.

Description: Ground-based video photography of firings of Space Shuttle Primary Reaction Control System (PRCS) engines show optical emissions extending nearly 4 km form the vehicle after steady state is reached. The total intensity and spatial distribution of these emissions depend on the angle between the spacecraft velocity vector and the engine exhaust axis. Candidate sources for this radiation are reviewed and the conclusion is reached that it is most likely due to vibrationally excited OH, formed by the reaction of fast ambient O atoms and H2O molecules in the exhaust.

Description: A parametrically driven simulation model is presented in order to provide a detailed insight into the effects of various input parameters in the life testing of a modular space suit. The RAMCOST model employed is a user-oriented simulation model for studying the life-cycle costs of designs under conditions of uncertainty. The results obtained from the EVA simulated model are used to assess various mission life testing parameters such as the number of joint motions per EVA cycle time, part availability, and number of inspection requirements. RAMCOST first simulates EVA completion for NASA application using a probabilistic like PERT network. With the mission time heuristically determined, RAMCOST then models different orbital replacement unit policies with special application to the astronaut's space suit functional designs.

Description: To reach even the nearest stars in a human lifetime requires a ship speed that is a substantial fraction of the speed of light. This means an enormous kinetic energy investment in the ship and suggests that maximizing the efficiency may be more important than minimizing the mass ratio. This paper develops the pertinent relativistic rocket equations and finds the conditions for high kinematic efficiency. Using the limiting efficiency of percent, the minimum energy needed for one-way and for round trip voyages, and to explore all 'good' suns out to a given distance, using prefueled rockets, is determined. Savings due to refueling the rocket (and reloading propellant) at the destination and in flight are both somewhat greater than 2:1.

Description: An algorithm has been developed to edit automatically Global Positioning System data such that outlier deletion, cycle slip identification, and correction are independent of clock instability, selective availability, receiver-satellite kinematics, and tropospheric conditions. This algorithm, called TurboEdit, operates on undifferenced, dual frequency carrier phase data, and requires the use of P code pseudorange data and a smoothly varying ionospheric electron content. TurboEdit was tested on the large data set from the CASA Uno experiment, which contained over 2500 cycle slips.Analyst intervention was required on 1 percent of the station-satellite passes, almost all of these problems being due to difficulties in extrapolating variations in the ionospheric delay. The algorithm is presently being adapted for real time data editing in the Rogue receiver for continuous monitoring applications.

Description: A description of the clustering, classification, and image display program AMOEBA is presented. Using a difficult high resolution aircraft-acquired MSS image, the steps the program takes in forming clusters are traced. A number of new features are described here for the first time. Usage of the program is discussed. The theoretical foundation (the underlying mathematical model) is briefly presented. The program can handle images of any size and dimensionality.

Description: A laser-material database and laser-modeling software system for designing lasers for laser-based Light Detection And Ranging (LIDAR) systems are presented. The software system consists of three basic sections: the database, laser models, and interface software. The database contains the physical parameters of laser, optical, and nonlinear materials required by laser models. The models include efficiency calculations, electrooptical component models, resonator, amplifier, and oscillator models, and miscellaneous models. The interface software provides a user-friendly interface between the user and his personal data files, the database, and models. The structure of the software system is essentially in place, while future plans call for upgrading the computer hardware and software in order to support a multiuser multitask environment.

Description: This paper presents the design constraints, flight environments, conceptual design iterations and analytical methods used in the design and flight certification of the Reinforced Carbon-Carbon (RCC) chin panel for the Space Shuttle Orbiter. A discussion of the thermal/structural response of the chin panel to the imposed environments is presented. As with all critical airframe components, it was desirable to conduct a structural test to verify design adequacy. However, with the chin panel, a meaningful test to simulate the critical thermal stresses was not considered feasible.

Description: A new approach for the placement of sensors and actuators in the active control of flexible space structures is developed. The approach converts the discrete nature of the sensor and actuator positioning problem to a nonlinear programming optimization through approximation of the control forces and output measurements by spatially continuous functions. The locations of the sensors and actuators are optimized in order to move the transmission zeros of the system farther to the left of the imaginary axis. The criterion for sensor/actuator placement can be quite useful for optimal regulation and tracking problems, as well as for low-authority controller designs. Two performance metrics are considered for the optimization and are applied to the sensor/actuator positioning of a large-order flexible space structure.

Description: Distributed software engineering techniques and methods for improving the specification and testing phases are considered. With multiversion development, multiple implementations allow the use of an automated approach to testing called back-to-back (B/B) testing in which the outputs are compared to detect any discrepancies. However, a specification defect may lead to similar errors in the multiple versions and the underlying fault may not be detected with a B/B testing approach. The use of diverse formal specifications has been proposed as a solution to this problem, since defects in independently written specifications are likely to be different. To examine these issues, an experiment was performed using the design diversity approach in the specification, design, implementation, and testing of distributed software. In the experiment, three diverse formal specifications were used to produce multiple independent implementations of a distributed communication protocol in Ada. The problems encountered in building complex concurrent processing systems in Ada were also studied. Many pitfalls were discovered in mapping the formal specifications into Ada implementations.

Description: Electret measurements obtained of the particulate contamination environment within the Space Shuttle Orbiter's cargo bay are presently compared with ground measurements of the particulates emitted by the Shuttle's SRBs, as well as with the expected natural particulate environment as measured by Skylab. Chemical analysis is shown to reveal the difference between natural and anthropogenic space debris; the most probable primary source of the Space Shuttle's particulate environment is the SRB exhaust.

Description: This paper describes the GEODYN computer program developed by the Geodynamics Branch at the NASA Goddard Space Flight Center and outlines the procedure for accurate satellite orbit and tracking-data analyses. The capabilities of the program allow the development of gravity fields as large as 90 by 90, and a complete modeling of tidal parameters. It is also feasible to numerically integrate a continuous orbit of a satellite such as Lageos for up to 12 years. The evolution of the orbit can be studied, and, by comparison with locally determined orbits, force model improvements can be made. The GEODYN flow diagrams are presented.

Description: Viewgraphs on tethered systems control are presented. Topics covered include: rigid body simplifications; feedback control; quadratic optimal nonlinear control; quadratic optimal nonlinear controllers; Lyapunov-based nonlinear controllers; sensor/actuator options; tether control; and fuzzy logic control.

Description: Viewgraphs on rendezvous guidance are presented. Topics covered include: rendezvous guidance; Lambert Targeting; Linear Quadratic Targeting; unmanned vehicles; rendezvous trajectory; and fuzzy logic control.

Description: Viewgraphs on proximity operations in space station environment are presented. Topics covered include: automated flight; remote manual piloting; task requirements and constraints; problem formulation; and flight parameter flow/pilot interaction for proximity operations task.

Description: Viewgraphs on power system technology discipline for Space Station Freedom are presented. Topics covered include: power generation subsystem; energy storage subsystem; and power distribution.

Description: Viewgraphs on an advanced automation of a prototypic thermal control system for space station are presented. The Thermal Expert System (TEXSYS) was initiated in 1986 as a cooperative project between ARC and JCS as a way to leverage on-going work at both centers. JSC contributed Thermal Control System (TCS) hardware and control software, TCS operational expertise, and integration expertise. ARC contributed expert system and display expertise. The first years of the project were dedicated to parallel development of expert system tools, displays, interface software, and TCS technology and procedures by a total of four organizations.

Description: Viewgraphs on Space Station Freedom central thermal control system (CTCS) evolution are presented. Topics covered include: (1) growth requirements and basic features of research and development and transportation nodes; (2) identifying the principal CTCS hooks and scars at assembly complete to accommodate growth; and (3) describing the general provisions for growth and identifying pertinent design issues.

Description: Viewgraphs and discussion on superfluid helium needs and resupply on space station are presented. Topics covered include: uses of superfluid helium in space; space station He 2 technology issues; resupply - fluid management issues; liquid acquisition devices for on orbit transfer; and liquid acquisition devices for SHOOT.

Description: Subcritical cryogenic fluid management has long been recognized as an enabling technology for key propulsion applications, such as space transfer vehicles (STV) and the on-orbit cryogenic fuel depots which will provide STV servicing capability. The LeRC Cryogenic Fluids Technology Office (CFTO), under the sponsorship of OAST, has the responsibility of developing the required technology via a balanced program involving analytical modeling, ground based testing, and in-space experimentation. Topics covered in viewgraph form include: cryogenic management technologies; nitrogen storage and supply; cryogenic nitrogen cooling capability; and LN2 system demonstration technical objectives.

Description: Viewgraphs and discussion on automated assembly of large space structures are presented. The program research objective is to develop technology and demonstrate the potential for automated inspace assembly of large erectable structures. This is accomplished by merging experience in structural assembly and robotics at LaRC into an interdisciplinary program with focused effort on automated assembly of a generic structural configuration with a standard cell and by building into the system the capability to do expanded research with complex configurations.

Description: PROBE (Precision Reflector Orbital Build Experiment) is a Shuttle flight demonstration experiment designed to study extravehicular activity (EVA) assembly of precision segmented reflectors. PROBE will support missions being considered for NASA's Global Change Technology Initiative as well as other missions in astrophysics and spacecraft optical communications requiring large precision reflectors. Such reflectors are envisioned to consist of a low-mass backup truss to which the optical surface is attached. Because of their large size, these reflectors will be constructed on-orbit from smaller pieces which can be packaged in the launch vehicle. The technology to be developed with PROBE also has application for construction of solar dynamic collectors which are planned for the enhanced configuration of Space Station Freedom. Viewgraphs of PROBE are presented.

Description: Viewgraphs on structures for Space Station Freedom are presented. The structures subsystem, mechanical subsystem, and evolution issues are addressed.

Description: Viewgraphs on welding/brazing for space station repair are presented. Topics covered include: fabrication and repair candidates; debris penetration of module panel; welded repair patch; mechanical assembly of utility fluid line; space station utility systems; Soviet aerospace fabrication - an overview; and processes under consideration.

Description: A proposed evolutionary growth scenario for Space Station Freedom was defined recently by a NASA task force created to study requirements for a Human Exploration Initiative. The study was an initial response to President Bush's July 20, 1989 proposal to begin a long range program of human exploration of space including a permanently manned lunar base and a manned mission to Mars. This growth scenario evolves Freedom into a critical transportation node to support lunar and Mars missions. The growth scenario begins with the Assembly Complete configuration and adds structure, power, and facilities to support a Lunar Transfer Vehicle (LTV) verification flight. Evolutionary growth continues to support expendable, then reusable LTV operations, and finally, LTV and Mars Transfer Vehicle (MTV) operations. The significant structural growth and additional operations creating new loading conditions will present new technological and structural design challenges in addition to the considerable technology requirements of the baseline Space Station Freedom program. Several structural design and technology issues of the baseline program are reviewed and related technology development required by the growth scenario is identified.

Description: Viewgraphs on the resupply interface mechanism are presented. The major servicing activities for any major asset are normal maintenance, consumable replenishment, repair of failed components, and preplanned product improvement. Spacecraft propulsion system resupply can be divided into three major issues: design for servicing, servicing technology, and mechanization.

Description: Viewgraphs on space station fluid resupply are presented. Space Station Freedom is resupplied with supercritical O2 and N2 for the ECLSS and USL on a 180 day resupply cycle. Resupply fluids are stored in the subcarriers on station between resupply cycles and transferred to the users as required. ECLSS contingency fluids (O2 and N2) are supplied and stored on station in a gaseous state. Efficiency and flexibility are major design considerations. Subcarrier approach allows multiple manifest combinations. Growth is achieved by adding modular subcarriers.

Description: The Air Logistics Command within the Air Force is responsible for maintaining a wide variety of aircraft fleets and weapon systems. To maintain these fleets and systems requires specialized test equipment that provides data concerning the behavior of a particular device. The test equipment is used to 'poke and prod' the device to determine its functionality. The data represent voltages, pressures, torques, temperatures, etc. and are called testpoints. These testpoints can be defined numerically as being in or out of limits/tolerance. Some test equipment is termed 'automatic' because it is computer-controlled. Due to the fact that effective maintenance in the test arena requires a significant amount of expertise, it is an ideal area for the application of knowledge-based system technology. Such a system would take testpoint data, identify values out-of-limits, and determine potential underlying problems based on what is out-of-limits and how far. This paper discusses the application of this technology to a device called the Unified Fuel Control (UFC) which is maintained in this manner.

Description: This article will demonstrate how the artificial intelligence concepts in CLIPS used to solve problems encountered in the design and implementation of graphics applications within the UNIX-X Window System environment. The design of an extended version of CLIPS, called XCLIPS, is presented to show how the X Windows System graphics can be incorporated without losing DOS compatibility. Using XCLIPS, a sample scientific application is built that applies solving capabilities of both two and three dimensional graphics presentations in conjunction with the standard CLIPS features.

Description: The AI Bus software architecture was designed to support the construction of large-scale, production-quality applications in areas of high technology flux, running heterogeneous distributed environments, utilizing a mix of knowledge-based and conventional components. These goals led to its current development as a layered, object-oriented library for cooperative systems. This paper describes the concepts and design of the AI Bus and its implementation status as a library of reusable and customizable objects, structured by layers from operating system interfaces up to high-level knowledge-based agents. Each agent is a semi-autonomous process with specialized expertise, and consists of a number of knowledge sources (a knowledge base and inference engine). Inter-agent communication mechanisms are based on blackboards and Actors-style acquaintances. As a conservative first implementation, we used C++ on top of Unix, and wrapped an embedded Clips with methods for the knowledge source class. This involved designing standard protocols for communication and functions which use these protocols in rules. Embedding several CLIPS objects within a single process was an unexpected problem because of global variables, whose solution involved constructing and recompiling a C++ version of CLIPS. We are currently working on a more radical approach to incorporating CLIPS, by separating out its pattern matcher, rule and fact representations and other components as true object oriented modules.

Description: The paper describes a portion of the work aimed at developing an integrated, knowledge based environment for the development of engineering-oriented applications. An Object Representation Language (ORL) was implemented in C++ which is used to build and modify an object-oriented knowledge base. The ORL was designed in such a way so as to be easily integrated with other representation schemes that could effectively reason with the object base. Specifically, the integration of the ORL with the rule based system C Language Production Systems (CLIPS), developed at the NASA Johnson Space Center, will be discussed. The object-oriented knowledge representation provides a natural means of representing problem data as a collection of related objects. Objects are comprised of descriptive properties and interrelationships. The object-oriented model promotes efficient handling of the problem data by allowing knowledge to be encapsulated in objects. Data is inherited through an object network via the relationship links. Together, the two schemes complement each other in that the object-oriented approach efficiently handles problem data while the rule based knowledge is used to simulate the reasoning process. Alone, the object based knowledge is little more than an object-oriented data storage scheme; however, the CLIPS inference engine adds the mechanism to directly and automatically reason with that knowledge. In this hybrid scheme, the expert system dynamically queries for data and can modify the object base with complete access to all the functionality of the ORL from rules.

Description: This paper describes the reasons why an object system with integrated pattern-matching and object-oriented programming facilities is desirable for CLIPS and how it is possible to integrate such a system into CLIPS while maintaining the run-time performance and the low memory usage for which CLIPS is known. The requirements for an object system in CLIPS that includes object-oriented programming and integrated pattern-matching are discussed and various techniques for optimizing the object system and its integration with the pattern-matcher are presented.

Description: In this project we extend C Language Production System (CLIPS), an existing Expert System shell, by creating three new options. Specifically, first we create a compatible with CLIPS environment that allows for defining objects and object hierarchies, second we provide means to implement backward chaining in a pure forward chaining environment, and finally we give some simple explanation facilities for the derivations the system has made. Objects and object hierarchies are extended so that facts can be automatically inferred, and placed in the fact base. Backward chaining is implemented by creating run time data structures which hold the derivation process allowing for a depth first search. The backward chaining mechanism works not only with ground facts, but also creates bindings for every query that involves variables, and returns the truth value of such a query as well as the relevant variable bindings. Finally, the WHY and HOW explanation facilities allow for a complete examination of the derivation process, the rules triggered, and the bindings created. The entire system is integrated with the original CLIPS code, and all of its routines can be invoked as CLIPS commands.

Description: Knowledge representation is one of the major concerns in expert systems. The representation of domain-specific knowledge should agree with the nature of the domain entities and their use in the real world. For example, architectural applications deal with objects and entities such as spaces, walls, and windows. A natural way of representing these architectural entities is provided by frames. This research explores the potential of using the expert system shell CLIPS, developed by NASA, to implement a frame-based representation that can accommodate architectural knowledge. These frames are similar but quite different from the 'template' construct in version 4.3 of CLIPS. Templates support only the grouping of related information and the assignment of default values to template fields. In addition to these features frames provide other capabilities including definition of classes, inheritance between classes and subclasses, relation of objects of different classes with 'has-a', association of methods (demons) of different types (standard and user-defined) to fields (slots), and creation of new fields at run-time. This frame-based representation is implemented completely in CLIPS. No change to the source code is necessary.

Description: Simulations provide necessary testbeds for system designs. Currently we are developing software whose main requirement is to produce CLIPS executable simulation code of a user prespecified system. This process minimizes the amount of engineering effort required to specify a system thereby reducing cost and providing the capability to quickly revise system definitions. Modeling satellite systems is the primary objective toward which testing has, and is, being conducted using satellite specifications. This paper describes the modeling software being developed, its formatted input and the CLIPS system simulation it produces.

Description: This paper proposes the enhancement of the CLIPS user interface to improve the over-all usability of the CLIPS development environment. It suggests some directions for the long term growth of the user interface, and discusses some specific strengths and weaknesses of the current CLIPS PC user interface. Every user of CLIPS shares a common experience: his/her first interaction with the system itself. As with any new language, between the process of installing CLIPS on the appropriate computer and the completion of a large application, an intensive learning process takes place. For those with extensive programming knowledge and LISP backgrounds, this experience may have been mostly interesting and pleasant. Being familiar with products that are similar to CLIPS in many ways, these users enjoy a relatively short training period with the product. Already familiar with many of the functions they wish to employ, experienced users are free to focus on the capabilities of CLIPS that make it uniquely useful within their working environment.

Description: HyperCLIPS combines the intuitive, interactive user interface of the Apple Macintosh(TM) with the powerful symbolic computation of an expert system interpreter. HyperCard(TM) is an excellent environment for quickly developing the front end of an application with buttons, dialogs, and pictures, while the CLIPS interpreter provides a powerful inference engine for complex problem solving and analysis. By integrating HyperCard and CLIPS the advantages and uses of both packages are made available for a wide range of uses: rapid prototyping of knowledge-based expert systems, interactive simulations of physical systems, and intelligent control of hypertext processes, to name a few. Interfacing HyperCard and CLIPS is natural. HyperCard was designed to be extended through the use of external commands (XCMDs), and CLIPS was designed to be embedded through the use of the I/O router facilities and callable interface routines. With the exception of some technical difficulties which will be discussed later, HyperCLIPS implements this interface in a straight forward manner, using the facilities provided. An XCMD called 'ClipsX' was added to HyperCard to give access to the CLIPS routines: clear, load, reset, and run. And an I/O router was added to CLIPS to handle the communication of data between CLIPS and HyperCard.

Description: SigmaCLIPSE provides an expert systems and 'intelligent' data base development program for diverse systems integration environments that require support for automated reasoning and expert systems technology, presentation management, and access to 'intelligent' SQL data bases. The SigmaCLIPSE technology and and its integrated ability to access 4th generation application development and decision support tools through a portable SQL interface, comprises a sophisticated software development environment for solving knowledge engineering and expert systems development problems in information intensive commercial environments -- financial services, health care, and distributed process control -- where the expert system must be extendable -- a major architectural advantage of NASA CLIPS. SigmaCLIPSE is a research effort intended to test the viability of merging SQL data bases with expert systems technology.

Description: The Intelligent Selection of Loop Electronics (ISLE) system is an integrated knowledge-based system that is used to configure, evaluate, and rank possible network carrier equipment known as Digital Loop Carrier (DLC), which will be used to meet the demands of forecasted telephone services. Determining the best carrier systems and carrier architectures, while minimizing the cost, meeting corporate policies and addressing area service demands, has become a formidable task. Network planners and engineers use the ISLE system to assist them in this task of selecting and configuring the appropriate loop electronics equipment for future telephone services. The ISLE application is an integrated system consisting of a knowledge base, implemented in CLIPS (a planner application), C++, and an object database created from existing INGRES database information. The embedibility, performance, and portability of CLIPS provided us with a tool with which to capture, clarify, and refine corporate knowledge and distribute this knowledge within a larger functional system to network planners and engineers throughout U S WEST.

Description: TDA documents determine the personnel strengths for each Army installation. They reflect the number of people required to accomplish a certain mission by various characteristics. U.S. Army Training and Doctrine Command (TRADOC) analysts continuously scrutinize these documents to ensure that they comply with provided guidance. Part of this guidance has been used to develop a set of manual rules. Analysts apply these rules to the TDA to eliminate positions, downgrade positions, or reduce position strength. However, this process is very time consuming. ln addition, human involvement introduces inconsistencies and errors that are difficult to detect later. This paper explains how I represented these rules using the 'C' Language Production System (CLIPS) to develop an expert system that is applied consistently and comprehensively for all TRADOC installations. The TDA System Analyzer reduces the review process from about five days to just twenty minutes; giving the user more time to analyze the results and thereby make better decisions. Furthermore, the user is assured that the rules are applied uniformly to every TDA document. This paper also explains the integration of the TDA System Analyzer into TRADOC's On-Line TDA System. Providing the analyst an extra utility module that can be accessed from a familiar environment.

Description: Nichols Research Corporation is developing the BM/C3 Requirements Analysis Tool (BRAT) for the U.S. Army Strategic Defense Command. BRAT uses embedded CLIPS/Ada to model the decision making processes used by the human commander of a defense system. Embedding CLlPS/Ada in BRAT allows the user to explore the role of the human in Command and Control (C2) and the use of expert systems for automated C2. BRAT models assert facts about the current state of the system, the simulated scenario, and threat information into CLIPS/Ada. A user-defined rule set describes the decision criteria for the commander. We have extended CLIPS/Ada with user-defined functions that allow the firing of a rule to invoke a system action such as weapons release or a change in strategy. The use of embedded CLIPS/Ada will provide a powerful modeling tool for our customer at minimal cost.

Description: When the Macintosh computer was first released, the primary user was a computer hobbyist who typically had a significant technical background and was highly motivated to understand the internal structure and operational intricacies of the computer. In recent years the Macintosh computer has become a widely-accepted general purpose computer which is being used by an ever-increasing non-technical audience. This has lead to a large base of users which has neither the interest nor the background to understand what is happening 'behind the scenes' when the Macintosh is put to use - or what should be happening when something goes wrong. Additionally, the Macintosh itself has evolved from a simple closed design to a complete family of processor platforms and peripherals with a tremendous number of possible configurations. With the increasing popularity of the Macintosh series, software and hardware developers are producing a product for every user's need. As the complexity of configuration possibilities grows, the need for experienced or even expert knowledge is required to diagnose problems. This presents a problem to uneducated or casual users. This problem indicates a new Macintosh consumer need; that is, a diagnostic tool able to determine the problem for the user. As the volume of Macintosh products has increased, this need has also increased.

Description: The importance of the incorporation of various graphics-oriented features into CLIPS is discussed. These popular features, which have been implemented in a version of CLIPS developed for a popular workstation, are described and their usefulness in the development of expert systems is examined.

Description: This paper addresses the question of how to mix CLIPS with graphics and how to overcome PC's memory limitations by using the extended memory available in the computer. By adding graphics and extended memory capabilities, CLIPS can be converted into a complete and powerful system development tool, on the other most economical and popular computer platform. New models of PCs have amazing processing capabilities and graphic resolutions that cannot be ignored and should be used to the fullest of their resources. CLIPS is a powerful expert system development tool, but it cannot be complete without the support of a graphics package needed to create user interfaces and general purpose graphics, or without enough memory to handle large knowledge bases. Now, a well known limitation on the PC's is the usage of real memory which limits CLIPS to use only 640 Kb of real memory, but now that problem can be solved by developing a version of CLIPS that uses extended memory. The user has access of up to 16 MB of memory on 80286 based computers and, practically, all the available memory (4 GB) on computers that use the 80386 processor. So if we give CLIPS a self-configuring graphics package that will automatically detect the graphics hardware and pointing device present in the computer, and we add the availability of the extended memory that exists in the computer (with no special hardware needed), the user will be able to create more powerful systems at a fraction of the cost and on the most popular, portable, and economic platform available such as the PC platform.

Description: This paper addresses an unconventional application of a production system to a problem involving belief specialization. The production system reduces a large quantity of low-level descriptions into just a few higher-level descriptions that encompass the problem space in a more tractable fashion. This classification process utilizes a set of descriptions generated by combining the component hierarchy of a physical system with the semantics of the terminology employed in its operation. The paper describes an application of this process in a program, constructed in C and CLIPS, that classifies signatures of electromechanical system configurations. The program compares two independent classifications, describing the actual and expected system configurations, in order to generate a set of contradictions between the two.

Description: This paper describes a set of extensions made to CLIPS version 4.3 that provide capabilities similar to the blackboard control architecture described by Hayes-Roth. There are three types of additions made to the CLIPS shell. The first extends the syntax to allow the specification of blackboard locations for CLIPS facts. The second implements changes in CLIPS rules and the agenda manager that provide some of the powerful features of the blackboard control architecture. These additions provide dynamic prioritization of rules on the agenda allowing control strategies to be implemented that respond to the changing goals of the system. The final category of changes support the needs of continuous systems, including the ability for CLIPS to continue execution with an empty agenda.

Description: CLIPS is being used as an integral module of a rapid prototyping system. The prototyping system consists of a display manager for object browsing, a graph program for displaying line and bar charts, and a communications server for routing messages between modules. A CLIPS simulation of a physical model provides dynamic control of the user's display. Currently, a project is well underway to prototype the Advanced Automation System (AAS) for the Federal Aviation Administration.

Description: We were motivated to define and build a sophisticated satellite simulation capability for the evaluation at a satellite operations automated environment called IntelliSTAR. This architecture, and associated prototype, addresses the entire spacecraft operations cycle including planning, scheduling, task execution, and analysis. It is aimed at increasing the autonomous capability of current and future spacecraft. It utilizes advanced software techniques to address incomplete and conflicting data for making decisions. It also encompasses critical response time requirements, complex relationships among multiple systems, and dynamically changing objectives. Given the extreme scope of activities that are targeted, a sophisticated, flexible, and dynamic simulation environment was required to drive this prototype. In particular the derived requirements for evaluating the IntelliSTAR prototype include realistic and dynamic environment, easily reconfigurable, and multiple levels of fidelity.

Description: Viewgraphs on thermal control systems technology discipline for Space Station Freedom are presented. Topics covered include: heat rejection; heat acquisition and transport; monitoring and control; passive thermal control; and analysis and test verification.

Description: Viewgraphs and discussion on an evolutionary construction facility for Space Station Freedom are presented. Space Station Freedom (SSF) will support permanent human presence in space and has the potential to enable scientific and exploratory endeavors unequalled in history. With larger and more ambitious spacecraft being developed, it will serve as a site for construction, checkout, and deployment. A facility attached to SSF is required to develop and demonstrate the techniques that will enable on-orbit construction of future large spacecraft. Examples of attached scientific experiments that currently envision in-space construction and that are discussed are: Solar X-ray Pinhole Occulter Facility, Astromag, and X-ray Large Array. Examples of large assemblable spacecraft which are discussed are: Large Deployable Reflector (LDR), Geostationary Platforms, and interplanetary vehicles.

Description: Viewgraphs and discussion on approaches to dealing with meteoroid and orbital debris protection on the space station are presented. The National Space Policy of February, 1988, included the following: 'All sectors will seek to minimize the creation of space debris. Design and operations of space tests, experiments, and systems will strive to minimize or reduce accumulation of space debris consistent with mission requirements and cost effectiveness.' The policy also tasked the National Security Council, which established an Interagency Group, which in turn produced an Interagency Report. NASA and DoD tasks to establish a joint plan to determine techniques to measure the environment, and techniques to reduce the environment are addressed. Topics covered include: orbital debris environment, meteoroids, orbital debris population, cataloged earth satellite population, USSPACECOM cataloged objects, and orbital debris radar program.

Description: Viewgraphs and discussion on space station fluid management logistics are presented. Topics covered include: fluid management logistics - issues for Space Station Freedom evolution; current fluid logistics approach; evolution of Space Station Freedom fluid resupply; launch vehicle evolution; ELV logistics system approach; logistics carrier configuration; expendable fluid/propellant carrier description; fluid carrier design concept; logistics carrier orbital operations; carrier operations at space station; summary/status of orbital fluid transfer techniques; Soviet progress tanker system; and Soviet propellant resupply system observations.

Description: Aerospace engineering students at the Virginia Polytechnic Institute and State University undertook three design projects under the sponsorship of the NASA/USRA Advanced Space Design Program. All three projects addressed cargo and/or crew transportation between low Earth orbit and geosynchronous Earth orbit. Project SPARC presents a preliminary design of a fully reusable, chemically powered aeroassisted vehicle for a transfer of a crew of five and a 6000 to 20000 pound payload. The ASTV project outlines a chemically powered aeroassisted configuration that uses disposable tanks and a relatively small aerobrake to realize propellant savings. The third project, LOCOST, involves a reusable, hybrid laser/chemical vehicle designed for large cargo (up to 88,200 pounds) transportation.

Description: There is a need for an inexpensive, extensive, long-lasting global electric field measurement system (ELF). The primary performance driver of this mission is the need to measure the attitude of each spacecraft in the Earth's electric field very accurately. In addition, it is necessary to know the electric charge generated by the satellite as it crosses the magnetic field lines (E equals V times B). In order to achieve the desired global coverage, a constellation of about 50 satellites in at least 18 different orbits will be used. To reduce the cost of each satellite, off-the-shelf, proven technology will be used whenever possible. Researchers have set a limit of $500,000 per satellite. Researchers expect the program cost, including the deployment of the entire constellation, to be less than $100 million. The minimum projected mission life is five years.