ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Analytical Chemistry and Spectroscopy  (3,658)
  • Chemical Engineering  (1,949)
  • Humans  (1,308)
  • 1990-1994  (5,098)
  • 1980-1984  (1,817)
  • 1925-1929
  • 1992  (2,632)
  • 1990  (2,466)
  • 1984  (1,817)
Collection
Years
  • 1990-1994  (5,098)
  • 1980-1984  (1,817)
  • 1925-1929
Year
  • 101
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Additional Material: 1 Tab.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 102
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1171-1174 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A new approach involving dynamic melt rheology i.e. dynamic mechanical analysis in a molten inert matrix, is presented for studying the cure of thermoset resins. The degree of cure by dynamic melt rheology has been correlated with that from differential scanning calorimetry, DSC (correlation coefficient = 0.87) and the lack of an excellent correlation is attributed to the uncertainties with the DSC method at higher cure levels. A kinetic expression with appropriate constants, “E, A, and n” from our new approach is presented for predicting the time-temperature dependence of the degree of cure. Advantages of dynamic melt rheology are discussed in relationship to conventional dynamic mechanical and DSC methods.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 103
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1175-1179 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The time for brittle failure by slow crack growth for 22 polyethylene copolymers was measured in Igepal and air. The notched tensile tests were conducted in Igepal and air at 50°C and 4.2 MPa and in air at 80°C and 2.4 MPa. For failure times less than 103 min, the difference between the Igepal and air environments was not measurable. As the failure time increased beyond 103 min, the ratio of failure in air compared to that in Igepal increased so that for the very highest failure times of 5 × 105 to 108 min in air, the failure time in Igepal was reduced by 25 - 50 times. The correlation between the Igepal and air tests was generally good with respect to all types of polyethylene. However, a separation of the polyethylenes with respect to their comonomer, butene, hexene, or octene improved the correlation. The resistance to slow crack growth of all the current commercial polyethylene copolymers can be assessed by a notched tensile test in Igepal in about a week or less.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 104
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1183-1183 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 105
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 106
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1200-1204 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A study of melting a polymer pellet immersed in a hot silicone oil bath was conducted. The temperature rise at the center of the pellet was recorded. This experiment simulates the conduction melting mechanism of polymer solid pieces mixed in the hot melt inside an extruder screw channel. The pellets immersed in the silicone oil melted quite slowly, taking around one minute to melt a spherical pellet of about 4.5 mm diameter. The heating time could be greatly decreased by stirring the silicone oil to increase the heat transfer from the silicone oil to the pellet. Analysis of the conduction melting mechanism showed that the size reduction of the solid would be most effective in decreasing the heating time.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 107
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1205-1208 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The extrusion of blown film polyethylene is a complex process characterized by a large number of interdependent process variables. In order to derive the set of process conditions necessary for a desired film solid state property, the processor normally utilizes a laborious trial-and-error method. In this work, a technique is described to establish more directly the set of extruder settings for producing film with an optimum value of a given property. Biaxial toughness was optimized in the present work, but the technique is applicable to any quantifiable film property.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 108
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1185-1199 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The conventional sheet metal forming technique known as Deep Drawing was used to investigate the formability of self-reinforced thermoplastic sheets. The materials studied included uniaxially roll-drawn oriented polypropylene (OPP), cross-rolled biaxially oriented polypropylene (BOPP), and cross-ply laminated OPP (LOPP). OPP exhibits poor room temperature formability as determined by its Limiting Drawing Ratio (LDR). Its formability is improved at elevated temperatures, but samples suffer from non-uniform material flow, temperature sensitivity during forming, and a loss of mechanical properties due to the relaxation of orientation caused by the need for forming temperatures above the normal melting point. Although BOPP attains only moderate Improvements in mechanical properties compared to the machine direction of OPP, it exhibits much better room temperature formability. This difference in drawability between uniaxial and biaxial orientation states is a consequence of the difference in planar anisotropy between these two materials. LOPP has the potential of producing a material with superior performance compared to BOPP while still possessing the desirable formability of BOPP. The formed parts, however, undergo cracking in the outer ply parallel to the orientation direction as a consequence of the OPP small elongation to break in the transverse direction. In addition to forming problems, ordered polypropylene exhibits large shrinkage stresses at elevated temperatures. This may preclude its use in applications requiring a high level of dimensional stability. Classical plasticity theory for metals was appropriately modified to model the radial drawing stress for planar isotropic thermoplastic sheet materials.
    Additional Material: 23 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 109
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1209-1219 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The theory of optimal control is used to analyze the performance of a batch PMMA (poly(methylmethacrylate)) polymerization reactor. Optimal dynamic profiles of temperature, initiator feed rate, and initiator concentration in the reactor are generated in order for specified conversion of monomer, number molecular weight, and polydispersity of the final product to be obtained. Based on tae physical limitations of the system, some restrictions are imposed to the control variable variations. The application of Pontryagin's Minimum Principle leads to a mixed initial/final value problem, which is solved by discretizing the control law in the state-space, with the usage of a first order holder. A gradient method is used to minimize the Hamiltonian. The simulation results show that the gel-effect equation and restrictions imposed on the system are of primary importance to the analysis of the reactor performance.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 110
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1220-1227 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The effects of cavity shapes, particularly the expansion and contraction angles, and the Theological properties of polymeric liquids on vortex formation in the cuter cavity of a dual-cavity coat-hanger die have been examined. For power-law fluids, a vortex may appear in the expansion side of the outer cavity, and the size of the vortex is influenced by the expansion angle, the power-law index, and the Reynolds number. Two viscoelastic fluids were used in the flow visualization experiment; for an aqueous polyacrylamide solution, a vortex may appear in the contraction side of the outer cavity and this vortex is influenced by the contraction angle and the fluid elasticity, but no vortex was observed for a Boger fluid.
    Additional Material: 17 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 111
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1228-1236 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A double bubble tubular film process to produce biaxially oriented poly(p-phenylene sulfide) (PPS) film is described. Operating windows were developed for stable operation of both the first and second bubbles. Films produced from single bubble tubular film extrusion were largely amorphous having only seven to nine percent crystallinity. Double bubble PPS tubular film had up to 20 percent crystallinity which was increased to 30 percent by further annealing. The first and second bubble films had surface roughness standard deviation heights of 0.01 to 0.04 μm. Orientation was characterized by birefringence and wide angle X-ray diffraction pole figures of the 110 and 112 reflections. Biaxial orientation factors were computed. The double bubble films had higher Young's modulus and tensile strength but lower elongation to break than the single bubble films. Annealing further increases Young's modulus and tensile strength but decreases elongation to break. Double bubble and annealed films with roughly equal second bubble drawdown ratio and second blow up ratio tend to have balanced properties in the plane of the film.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 112
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1237-1251 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: This paper presents an experimentally-based analysis of the continuous filament regime of the melt-blowing process. The experiments were performed with a versatile air-polymer die, several die operating temperatures, and three different polymer feed resins. The measurements discern the effects upon the final fiber diameter of the following input parameters: die dimensions, die temperature, polymer feed resin, and both the air and polymer mass flow rates. An empirical model equation is developed which relates these input parameters to the final fiber diameter. In addition, the conditions which result in a transition of the filament from continuous (or stable) to discontinuous (or unstable) are quantified. The model equation and the transition or stability information are then used to predict the behavior of the melt-blowing process for a wide range of case studies involving the input parameters noted above. The data and empirical model are of considerable utility for developing new die designs, for comparison with theoretical models, for predicting fiber stability, and for explaining the behavior of current industrial melt-blowing processes.
    Additional Material: 25 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 113
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1323-1329 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A novel process to produce microcellular thermoplastic parts is described. This is achieved by integrating the deformation process in the foaming cycle in such a way that the cell nucleation and growth processes are effectively uncoupled from deformation. The nitrogen-polystyrene system is studied and the relationships between the essential process parameters are established. It is experimentally shown that the pressures associated with deformation do not reduce the number of bubbles nucleated. The process synthesized is demonstrated by making a microcellular polystyrene container.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 114
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 115
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1345-1345 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 116
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1341-1344 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: In (1), Narisawa and Takemori examined the physical interpretations and some experimental techniques of the J-Integral (ASTM E813-81) as applied to toughened polymers. Their results and conclusions are reexamined and discussed in terms of recent developments in J testing.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 117
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1330-1337 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The bubble size distribution created by the expanding foam plays a key role in controlling the load-bearing and other mechanical properties of the manufactured structural foam part. A numerical method to study the bubble growth and predict the bubble size distribution in polymeric foams is presented. On the microscopic scale, a cell model has been used. A cell is a system composed of a hypothetical spherical gas bubble and an envelope of polymer with constant mass surrounding the bubble. On the macroscopic scale, the foam has been modeled as a compressible medium consisting of a number of cells growing in close proximity to each other. The coupled system of the bubble growth equations for a cell and the field equations for the polymeric fluid are solved numerically to predict the spatial bubble size distribution and the flow front movement during the expansion process. The influence of different dimensionless parameters on the growth of spatially distributed bubbles and on the relative reduction in the transient bulk foam density, under isothermal condition; has been predicted. The existence of an axial pressure gradient in the mold due to the spatial variation of bubble growth is demonstrated through numerical experiments.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 118
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1346-1351 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A negative deep UV resist, XP 8843 (Shipley Co.),Since this paper was written the name of this resist has been changed from XP 8843 to SNR 248-10. has been made positive by the addition of 1,2,4-triazole. This is achieved by exposing the resist in the presence of the additive thereby inhibiting the crosslinking reaction. After exposure the additive is removed by heating under a vacuum. Unexposed areas of the resist may then be exposed and the resist crosslinked under normal processing conditions.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 119
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1352-1360 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: An easy to use, spreadsheet based, mathematical model for drying of strand cut polymer pellets has been developed and experimentally verified. This particle-scale model is based on internal mass-transfer controlled diffusion in the pellet. Examples of its usage in correlation and prediction of the effects of the drying-gas temperature, humidity, and pellet dimensions are presented. Application of the particle-scale model to the design of a countercurrent hopper drier is discussed. Even though examples are limited to water removal from poly(bisphenol-A)carbonate pellets, the model is general and may be used for the removal of other non-solvating low-concentration molecules from polymers with isotropic morphology.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 120
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1373-1381 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Monodisperse methyl methacrylate grafted latex rubber (MMA-g) particles (0.12-0.13 µm) have been used for the impact toughening of a series of styrene-acrylonitrile (SAN) copolymers of varied AN content. It was found that the MMA-g particles are most effective in toughening SANs containing about 25 to 34% AN. Mechanical properties, interphase adhesion, mechanical dilatometry, and phase morphology by transmission electron microscopy were determined on blends containing 20-30% rubber. Also, the miscibility range of SANs and poly(methyl methacrylate) (PMMA) graft was considered in attempting to analyze the relationships between the mechanical properties and the characteristic features of the blends. Issues relating the impact strength and deformation mechanisms, interphase adhesion, and particle morphology are discussed. It appears that the high impact strength of some of the blends may be caused primarily by certain morphological features such as particle clustering or small interparticle distances. Thus, craze initiation, shear yielding, and significant matrix deformation may all contribute to the overall ductility of the blend.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 121
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1382-1398 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The flow pattern within a partially intermeshing co-rotating twin-screw extruder is three dimensional and extremely complex. In order to simplify the problem, a slice perpendicular to the axis of the twin-screw extruder has been considered for flow analysis as a two-dimensional or a quasi-three-dimensional problem. The flow in this slice may be considered to consist of a nip region (located between the two screws) and a translation region in which the movement of the material is very similar to the one found in single-screw extruders. The flow in these two regions have been studied separately. This paper presents the numerical and experimental results of the nip region study. The flow division in the nip region has been quantified and results are presented in terms of a flow division ratio Xf. The flow field patterns have also been obtained. Newtonian as well as non-Newtonian behavior has been investigated. The influences of such factors as (i) the geometry (the radius of the barrel, radius of the screw, distance between the two screws), (ii) the material properties (the power-law index for shear rate dependent viscosity), and (iii) processing conditions (the screw speed), have also been studied.
    Additional Material: 29 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 122
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1399-1406 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Crack healing in poly(methyl methacrylate) (PMMA) by methanol treatment at 40°C-60°C has been investigated. It is found that the methanol treatment reduces the glass transition temperature in PMMA. Crack healing only occurs at an operating temperature higher than the effective glass transition temperature. There are two distinctive stages for crack healing based on the recovery of mechanical strength. The first stage corresponds to the progressive healing due to wetting, which has a constant crack closure rate at a given temperature. Immediately following the first stage, the second stage corresponding to diffusion enhances the quality of healing behavior. The surface morphologies obtained during healing and after fracture tests confirm these two stages. By comparing the fracture stress with the fractography, the fracture surface for stage I of crack healing is coplanar to the original crack surface. On the other hand, the original crack surface is destroyed in stage II of crack healing. It occurs in the region incorporating the original healed surface and appears to be like the Virgin fracture surface. It is also found that the tensile fracture stress of PMMA treated by methanol can recover to that of the virgin material. In addition, it is interesting to find that after sustained methanol treatment, the “snake bone” phenomenon on the fracture surface emerges.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 123
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 124
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1407-1412 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: This is a study on the rheological properties and packing efficiency of a fluid suspension, composed of a mixture of two dissimilar particulate species. A generalized analytic expression for the viscosity of the blend is first developed, and then utilized to derive quantitative ways of maximizing the fluidity and optimizing the filling capacity of the composite system. These, results are compared with earlier experimental and theoretical findings, and with the rheological measurements performed in the course of this work on a series of calcium carbonate-carbon black suspensions in poly-dimethylsiloxane.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 125
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1413-1419 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Polypropylene melt blown webs have been studied in terms of the relationships among the processing conditions, structure, and filtration efficiency. The effects of the processing conditions on filtration efficiency to aerosolized latex particles, pore size, fiber diameter, and air permeability have been investigated. The melt blowing process conditions investigated in this study were die and air temperatures, die-to-collector distance, and attenuation air flow rate at the die. The filtration efficiency has been found to increase linearly as mean pore size decreased. The degree of fiber-entanglement increased, therefore, the pore size and air permeability decreased with increasing processing temperature, increasing air flow rate at the die, or decreasing die-to-collector distance. Average fiber diameter appeared to change little with die-to-collector distance, but decreased with increasing die temperature or with increasing air flow rate.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 126
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1420-1430 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: ‘Enriched’ element, Q1+Po, and ‘standard’ element, Q1Po, are compared for the simulation of 3-dimensional flow of non-Newtonian fluids. Several 3-dimensional polymer flow problems are analyzed. The pressure field obtained by using Q1Po elements suffers from spurious pressure modes. For complex flows, depending upon the flow geometry and the boundary conditions used, Q1+Po elements may fall to simulate even the velocity field. Q1Po elements, which satisfy the Babuska-Brezzi condition, give accurate velocity and pressure distributions for all the problems analyzed here.
    Additional Material: 26 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 127
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1431-1441 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Igepal assisted environmental stress cracking (ESC) of LDPE has shown three characteristic regions with increasing crack driving force: Region I-crack speed and craze length increased. Region II-crack speed and duplex plastic zone length were constant, and Region Ill-crack speed decreased while the deformation zone length increased. The activation energies for the three regions were 100, 23, 20 kJ/mole, respectively. The proposed rate controlling processes of ESC for the LDPE/Igepal system are: Region 1 is controlled by a;-relaxation, and Region II and III are controlled by lamellar orientation. The Igepal plasticizes the amorphous phase and facilitates the stress induced orientation of the lamellar.
    Additional Material: 18 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 128
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1442-1453 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Three different polymer blends consisting of an isotropic matrix and a ther-motropic liquid crystalline polymer (LCP) as the reinforcement were extruded. Polycarbonate (PC) and polyetherimide (PEI) were the two matrices, and the LCPs used were Vectraw A950 of Hoechst-Celanese, a copolyester of hydroxybenzoic and 2,6 hydroxynaphthoic acids and an LCP of Granmont Inc., a condensation polymer of terephthalic acid, (l-phenylethyl)hydroquinone, and phenylhydroqui-none. These extrudates were characterized by a quantitative morphological technique to determine the percentage of LCP present as fibrils and the average domain diameter. These experimental observations were then coupled with the component Theological behavior and a simple heat transfer analysis to explain the morphology and property differences between the blends. Blends with the Granmont LCP showed no appreciable increase In the quantity of fibrils with draw ratio, for example, whereas the amount of fibrils in Vectra® blends tended to increase to a plateau with draw. The tensile modulus of the blends agreed well with composite theory, with average fibril moduli of 24.6 GPa and 23,3 GPa for Vectra® and the Granmont LCP, respectively. These differences can be explained in terms of the cooling behavior of the LCPs.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 129
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The characterization of network segment density of elastomers is discussed. Normally equilibrium solvent swelling is used as long as the polymer-solvent interaction parameter χ is available. However, χ is often not known or may be a function of the network segment density, or composition for a polymer whose structure is changed upon aging. The technique of measuring the modulus in tension or compression on solvent-swollen samples allows the network segment density to be calculated from the theory of rubber elasticity. This circumvents the problems associated with the solvent swelling technique. The modification of a commercially available thermomechanical analyzer is described, to enable compression modulus measurements on solvent swollen elastomers to be performed.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 130
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1595-1598 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Oven aged tensile bars of heat stabilized, glass reinforced nylon 66 material were studied by Fourier transform infrared (FTIR) spectroscopy using a photoacoustic detector. Flat weighed scrapings were removed from tensile bars whose tensile strength, elongation, impact, molecular weight, and thermal properties had previously been measured. Using the amide I band of nylon 66 as an internal standard, the thermal oxidation of nylon was followed using a commercially available photoacoustic detector. The infrared absorbance spectra demonstrate the formation of carbonyl stretching vibrations due to the thermal oxidation of nylon with a band center at 1713 cm-1 whose width at half height is 40 cm-1. The difference infrared spectra support reaction mechanisms dealing with an Initial increase in the degree of polymerization followed by transamidation reactions with subsequent formation of an α, β unsaturated carbonyl species and chain scissioning. By using data related to the percent retention of certain physical properties which had also been measured on these tensile bars, subtractive infrared spectroscopy yielded additional fundamental information regarding nylon 66 degradation. Consequently, nylon products being used in underhood automotive applications are currently being investigated for thermal oxidative degradation using this rapid and relatively non-destructive photoacoustic FTIR technique for durability considerations.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 131
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1615-1619 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A crystallization rate coefficient (CRC) parameter is introduced which has allowed a direct comparison of the crystallization rates of various polymers on a single scale for the first time. Basically, CRC represents a change in cooling rate required to bring about 1°C change in the supercooling of the polymer melt. For the polymers studied, this value varies between 35 h-1 (polyethylene terephthalate) and 155 h-1 (poly(tetrafluoroethylene)) and jumps to 295 h-1 for indium metal; the precision being better than ±5 percent. The reliability of CRC has been tested against the established trends e.g., (i) a large decrease in the crystallization rate of polyethylene terephthalate with increase in molecular weight, (ii) a lower crystallization rate of the “virgin” nylon 6 as compared to the processed nylon 6 resin, (iii) an increase in the crystallization rate of nylon 6 in the presence of nucleating agents, and (iv) a dramatic increase in crystallization rate as we go from poly(ethylene terephthalate) to poly(tetrafluoroethylene) and then from poly(tetrafluoroethylene) to the metals. The significance of the CRC barometer is discussed in the light of prior difficulties in directly comparing the crystallization rates of polymers.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 132
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1628-1632 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: In this paper it is shown that a core-shell impact modifier which is predispersed in one phase of a complex blend may migrate to another phase during melt compounding. The migration process appears to be driven by differences in the spreading behavior of the individual blend components. The details of the migration are analyzed by electron microscopy studies of partially compounded samples which were quenched, extracted, and separated from the extruder screw.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 133
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1620-1627 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The microstructure and fracture behavior of Injection molded samples of unfilled and filled grades of liquid crystalline polymers (Vectra® and Ultrax®) containing cold and warm knit lines have been studied by scanning electron microscopy, X-ray scattering, and Instron tensile tests. Four process parameters - melt temperature, mold temperature, injection time, and holding pressure - have been varied in accordance with a 24 factorial design experiment. In cold knit lines a 200 µm thick region with transverse orientation with Hermans orientation function f ≈ 0.12-0.18 is formed on both sides on the weld area. The strength of the cold knit lines is very low, 9.0-19.8 MPa corresponding to 15-20% of the full strength of the material. The strength of the warm knit lines increases markedly with increasing distance from the insert and is generally significantly greater (40-45 MPa, 48 mm from the insert) than in the cold welds. Annealing at 260-300°C of samples containing cold knit lines causes first a partial healing of the knit line and later extensive chemical degradation of the polymer.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 134
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 13-21 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A thermotropic liquid crystalline polyester (LCP) with a long flexible spacer group in the main chain was prepared by melt polymerization and mixed with poly(ethylene terephthalate) (PET). Differential scanning calorimetry (DSC) and scanning electron microscopy (SEM) studies revealed that the crystallization of PET was accelerated by the addition of LCP in the matrix. Interfacial adhesion between PET and LCP was much improved by introduction of a long flexible spacer in the main chain. Fibers of the blend with 30 wt percent of LCP had fine microfibrillar structure with a large aspect ratio formed in the matrix. Initial modulus and ultimate strength were highly elevated by the addition of LCP due to good interfacial adhesion and microfibrillar structure of LCP in the blend.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 135
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 136
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Tensile, cyclic, and tear properties were compared for several styrene-butadiene-styrene (SBS) triblock copolymers, KRATON D2104, D1101 and D1102, and blends of D2104 with monodisperse polystyrene of various molecular weights. D2104 is expected to have a morphology of polystyrene spheres in a polybutadiene continuous matrix. The mechanical properties of D2104 were compared to the properties of SBS materials which have higher styrene contents and exhibit cylindrical or lamellar morphologies. Blending the D2104 with polystyrene (molecular weights ranging from 2000 to 51,000) to 24 and 28 wt % total styrene content showed that the tensile strength obtained for a blend was dependent on the molecular weight of the polystyrene added. Cycle testing of the D2104-polystyrene blends showed that with increasing polystyrene content the softening effect increases with increasing strain. This indicates that the degree of phase continuity of the polystyrene domains may be changing from a spherical morphology to a cylindrical morphology similar to that of pure SBS with 28 wt % styrene content. Tear test results for the blends were also observed to be similar to the results for pure SBS of the same total polystyrene content.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 137
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 90-95 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Rapid freezing of a polymethylpentene (PMP)/cyclohexane solution to -80°C gives a tough, flexible foam, in marked contrast to the weak, friable foams obtained by phase-separation of PMP from other solvents. X-ray diffraction and differential scanning calorimetry (DSC) data indicate that the isotactic PMP is in an amorphous state. The production of a flexible, robust foam tube from PMP/cyclohexane implies that this material could find applications as replacement parts for arteries and veins or as filter devices. In sheet form, this material seems ideally suited for use as light-weight insulation for clothing because its open, microcellular structure permits moisture to escape as vapors, but retards air flow. This study demonstrates that process parameters, such as solvent composition, play an important role in determining the various microstructures and physical properties that can be obtained from a single polymer.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 138
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 139
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 142-146 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Some design strategies for structural reaction injection molding (S-RIM) and resin transfer molding (RTM) are presented. Our approach makes use of moldability diagrams to define the parameters necessary to meet the process requirements. Moldability diagrams are presented for the filling and curing steps. The criterion for selecting the amount of fiber reinforcement, injection time, catalyst level, and process temperatures in order to optimize properties and demold time is described.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 140
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 263-269 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The dispersion of variously surface-treated CaCo3 fillers in linear low density polyethylene has been studied, along with mechanical properties of the filled compounds. Microwave plasma discharges were used to modify the filler surfaces. Inverse gas chromatographic analyses showed that plasma treatments could change the dispersive and non-dispersive components of filler surface characteristics. A reduction in these surface energies facilitated the dispersion of the filler in the non-polar polyethylene. Mechanical properties, particularly those at high deformation of the filled plastic, also responded to filler surface treatments, the ductility at failure increasing with a decrease in the filler's surface polarity. For any given elongation at failure, it was found that the amount of filler accommodated by the host polymer was raised by the appropriate surface modification procedure. The work illustrates the important contribution made by interfacial phenomena to various performance aspects of complex polymer systems.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 141
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 303-307 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The tensile properties: Young's modulus, ultimate tensile strength, ultimate elongation, the glass transition temperature, and the dynamic mechanical properties (dynamic shear modulus (G'), loss tangent (Tan δ)), of three epoxy resins (Epon 828, Epon 836, Epon HPT 1071) cured with the disulfide-containing crosslinking agent - 4.4-dithiodianilme (DTDA) have been characterized. The results show that DTDA is a satisfactory crosslinking agent for the epoxide resins that have been studied as compared to the well-known curing agent methylene dianiline (MDA). There are no significant differences between the properties of Epon 828 cured with DTDA at stoichiometric ratio (2:1) and Epon 828 cured with DTDA at small amine excess ratio (1.75:1). The glass transition temperature of the cured tetrafunctional epoxy resin Epon HPT 1971 (235°C) is significantly higher than that of difunctional epoxy resins such as Epon 828 (Tg-175°C), but the product is too brittle to be used without plasticizer.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 142
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 143
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 291-302 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Based on previous works, a simple model is built to simulate the vinyl chloride monomer (VCM) polymerization in continuous suspension and bulk reactors. The branches of steady-state solutions are computed and their dynamic behavior is analyzed. It is observed that these systems present multiple steady-state solutions for some ranges of parameter values and that non-adiabatic reactors can also present ISOLAs. These reactors can also experience self-sustained oscillations in a very wide region of operation conditions.
    Additional Material: 24 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 144
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 321-325 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: DGEBA-DDM (diglycicyl ether of bisphenol-A-diamino diphenyl methane) networks of various epoxide/amine molar ratios ranging from 0.7 to 1.4, were studied by density, quasi static (10-4 s-1), and ultrasonic (5 106 s-1) modulus, and thermostimulated creep measurements. Any step aside stoichiometry leads to an antiplasticization, e.g. an increase of the quasi static modulus, whereas Tg decreases. The previous interpretations (based on volumetric property considerations), of this phenomenon are questionable. The only common feature of all the antiplasticized systems is an unexplained decrease of the population of macro-molecular segments involved in beta motions.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 145
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 314-320 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Dynamic-mechanical and dielectric characterization of the cold crystallization of PEEK has been performed in order to develop a non-destructive evaluation method of crystallinity in thermoplastic matrices. The Avrami approach is applied here to describe the Poly(ether ether ketone) (PEEK) crystallization kinetics after an appropriate reduction of dynamic-mechanical and dielectric parameters. Avrami exponents obtained from dielectric characterization are comparable with those obtained with DSC measurements reported in literature, while the exponents obtained from the dynamic-mechanical characterization are higher, reflecting also changes in the aspect ratio of the growing crystals. Variations in the glass transition temperature detected during cold crystallization are analyzed and analogies between PEEK and PET are discussed.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 146
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 424-430 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A theoretical analysis of the diffusion-controlled, essentially bubble-free, mass transfer regime of polymer solution devolatilization has been performed for a counterrotating, nonintermeshing twin-screw extruder (1). The commonly used penetration diffusion approach is applied specifically to this geometry. Mass transfer from the recirculating pool and barrel film in the closed channel and the pool only in the open channel is taken into account. Use is made in this study of the recently determined pumping characteristics of this geometry (2), which allow the estimation of the length of the extraction section. Mass transfer rate measurements have been taken on a 20-mm extruder using the model system polystyrene/ethylbenzene. The agreement between the mass transfer calculations and the experimental results is very good.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 147
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 431-435 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Isothermal aging after a quench from above the glass-transition temperature (Tg) to below it was studied as a function of cross-link density for model epoxy networks using small deformation stress relaxation experiments. We found that time-aging time and time-cross-link density superposition principles described the changes observed in the Viscoelastic behavior of the epoxy networks. The aging response in the nonlinear Viscoelastic regime was also studied using creep experiments for one of the networks. It was found that upon aging near to the conventional glass-transition temperature, the time required for the glass to age into structural equilibrium was independent of the magnitude of the applied stress. This result suggests that large stresses do not erase physical aging (or cause rejuvenation of the glasses).
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 148
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 553-565 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Blends of polyethylene (PE) and polyamide (PA) were prepared by a melt mixing process. The dependence of the number average size An of the dispersed phase on hydrodynamic conditions not only of shear rate but also temperature, inter-facial tension, viscosity of the blends (WU's treatment), and dispersed phase concentration were studied. The analysis of PE-PA blend morphology shows An to be the result of a balance between coalescence and disruption of the particles in the melt, and to display a strong increase in particle size when the minor component concentration is enhanced. These observations can be explained by a change in the rheology of the system. These assumptions are confirmed by the insertion in the blend of an ethylenemaleic anhydride (EMA) copolymer that yields EMA-g-PA graft copolymer during mechanical processing. Formation of this graft copolymer has been indicated by a strong particle size reduction and its concentration was measured by infrared experiments. The EMA-g-PA copolymer seems to decrease the blend interfacial tension and to deter the coalescence process.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 149
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 665-676 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The performance of plasticating single-screw extruders is analyzed by combining three functional sections: (a) solids-conveying section, (b) melting section, and (c) melt-conveying section. In the analysis of the melting section, we have incorporated a new concept of solid-bed deformation (i.e., the rheology of the solid bed) into Lindt-Elbirli's analysis and included convective heat transfer in the energy equation. Specifically, we have computed stresses on the surfaces of the solid bed, which is surrounded by thin melt films and a melt pool, and, also, computed the apparent modulus of the solid bed in the bulk state as a function of temperature and position within the solid bed, along the extruder axis. From this information, we were able to compute the extent of solid-bed deformation, by assuming a linear stress-strain relationship as the constitutive equation of the solid bed. In this approach, we do not assume a priori whether the solid bed is rigid or freely deformable. The solution of the system equations gives us the following information: (a) whether or not the solid bed deforms and if it does, then, how much; (b) the solid-bed velocity along the extruder axis; (c) pressure profiles along the extruder axis; (d) solid-bed profiles in the melting zone along the extruder axis; (e) temperature profiles along the extruder axis; (f) velocity and temperature distributions in the melt pool along the extruder axis; and (g) thicknesses of thin melt films surrounding the solid bed. Theoretically predicted solid bed and pressure profiles along the extruder axis are compared with experimental results reported in the literature. We have pointed out an urgent need for measurements of the apparent modulus of the solid bed in the bulk state as a function of temperature and pressure, under a combined shear/drag flow field.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 150
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 734-740 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The behavior of epoxy mortar was studied under various curing conditions, temperature and strain rate. The effect of aggregate size and distribution on the mechanical properties of epoxy mortar was also studied. Epoxy mortar with a uniform fine sand was cured at various temperatures to determine the optimum curing condition. The strain rate was varied between 0.01 to 6 percent strain per minute and the testing temperature between 22°C and 80°C. The strength, modulus, and compressive strain-strain relationship of polymer mortar are influenced by the curing method, testing temperature, and strain rate to varying degrees. The influence of test variables on the mechanical properties of epoxy mortar are quantified. Compared to the uniformly graded fine aggregate fillers the gap-graded aggregates produced polymer mortar with better mechanical properties. The compressive modulus and splitting tensile strength of epoxy mortar are related to their compressive strength. A new nonlinear constitutive model is proposed to predict the complete compressive stress-strain behavior of epoxy mortar. The constitutive relationship parameters are also related to the testing temperature and logarithmic strain rate.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 151
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: In theories of the minor phase (domain) formation in polyblends rendered as emulsions it is usually assumed that the size and shape of the domains are the result of melt viscosity effects (Taylor, Wu) or viscoelasticity effects (VanOene, Elmendorp) being balanced by interfacial tension. This assumption would predict a monotonic decrease of the domain size to a final limiting size with increasing energy of mixing. However, a systematic study of the dependence of domain morphology on industrial mixing processes which was carried out on a “model” LDPE/PS (2/1) mixture and the related polyalloy (i.e., the same mixture with a corresponding block copolymer as compatibilizer) does not support this expectation. Doirain size was found to go through a minimum as mixing energy was increased. A similar minimum was seen in data on specific volume of the melt vs. mixing energy, which indicates a correlation between melt specific volume and domain size. Calculation of the approximate surface area of the domains using a simple model of domain shape indicated that total interfacial energy in the polyblend and/or polyalloy is a trivial part of the mixing energy introduced. These calculations also indicated that if compatibilizer was located entirely at the interface, the surface layer would have a thickness of about 90 nm. Some micrographs seem to show such a surface layer. We propose that an abrasion mechanism is responsible for the early stage of the dispersion process, and that the final domain size may be controlled by a dispersion-coalescence equilibrium. This is compared with the theories of final particle size proposed by VanOene and Wu.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 152
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 153
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The effect of viscous dissipation on solidification onto the inner surface of a straight circular tube of a liquid flowing laminarly with a specified volumetric rate is analytically determined. Steady conditions and a constant tube wall temperature below the solidification temperature of the liquid are assumed. Solutions for the thickness of the solidified shell and for the pressure drop are obtained. The pressure gradient versus volumetric flow rate curve exhibits a minimum, suggesting that it might be possible to design runners for injection molding machines to have a minimum pressure drop if the volumetric flow rate is specified.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 154
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 813-820 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The birefringence distributions in injection-molded Compact Discs (CD) are determined in radial and tangential cross-sections and interpreted in terms of the process. The influence of processing conditions is discussed in several examples. It is shown that despite the high birefringence level the retardation of a beam of normal incidence is almost zero due to several compensation mechanisms. One optical axis is almost perpendicular to the surface. The medium, however, is biaxial with the preferential directions depending on the distance from the surface and the radial position. In contrast to a parallel beam, zero retardation cannot be achieved with a convergent beam in injection-molded polycarbonate disks for that reason.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 155
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The dimensional stability of sample cylinders cured with sheet molding compound pastes was investigated. A significant amount of dimensional change was found for these samples when they were annealed. Furthermore, the amount of change varied with location from the center to the wall along the radial direction of the sample cylinder to form a strain gradient. A series of experiments were then carried out to determine property gradients along the same direction in search of the source of the dimensional instability. It was found that the sample also had a gradient in cure and a gradient in dynamic mechanical properties. But these gradients are not in full agreement. In particular, the gradient of cure appears to be opposite to the direction of the strain gradient, while the gradient of the dynamic mechanical properties coincides with it. These results, therefore, suggest that the dimensional stability may be predominantly governed by the viscoelastic behavior of the material.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 156
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 821-828 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The complex viscosity of two thermoplastic polymer melts (high density polyethylene and polystyrene) filled with polydisperse glass beads (10-53 μm) has been studied in the domain of linear viscoelasticity as a function of frequency, temperature, and filler concentration. In the experimental windows examined, the complex viscosity can be well described by a new empirical model, which contains a Cross-type viscosity model for the frequency dependence, a Quemada-type model for the filler concentration dependence, and a compensation effect for the temperature dependence. This model allows the prediction of the complex viscosity of a glass bead-filled thermoplastic melt provided only four parameters are known, namely: the average maximum packing volume fraction characteristic of the filler geometry and size distribution, the flow activation energy of the thermoplastic, the shear-thinning parameter, and an adjustable parameter, also characteristic of the thermoplastic.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 157
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 893-904 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The Buss cokneader is a single-screw extruder with interrupted flights. Pins from the barrel are inserted into the screw channel. The screw is both rotating and oscillating. Due to this action, screw flights are continuously wiped by the pins. During one passage of the pin, the material is not only subjected to high shear stress, but it is reoriented as well, thus promoting the distributive mixing process by the local weaving action of the pins and screw flights. Attempts to model the cokneader tend to focus on a single pin passing through the hole in a screw flight (1, 2). However, a more comprehensive model can start with the same equations that apply to the corotating twin-screw extruder (3). Because the effect of leakage flows on the local pressure gradient has to be considered along with the effect of the local dragging action of the pins (neglecting the oscillatory action), experiments with model liquids have been performed to evaluate the comprehensive model. Additional experiments with a Plexiglas-wailed cokneader support the calculations concerning filled lengths in various screw geometries. These results, and those of model calculations, which are extended to the nonisothermal, non-Newtonian situation, are presented.
    Additional Material: 18 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 158
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 925-930 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Assumed is that there is no mass transfer among the droplets of reacting organic phase in a continuous vinyl chloride (VCM) suspension polymerization reactor. A mathematical model is thus developed to allow the calculation of steady states and the analysis of their dynamic stability. The results obtained are compared with those obtained with the hypothesis of perfect micromixing. It Is shown that both assumptions lead to similar dynamic structures, which confirms the complex behavior of these reactors. There are major differences, however, that can be exploited in future experimental work.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 159
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 160
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 931-936 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A major factor that weakens the weld line in injection moldings is the V-notch structure. Though the existence of a V-notch is well known, its depth variation with molding conditions has not been detailed. The aim of this paper is to clarify the V-notch structure and its effect on the strength of general purpose polystyrene injection moldings. A dog bone type tensile specimen with a weld line was molded under several molding conditions. The surface of the weld line was partially eliminated by cutting with a milling machine to seven levels of cut depth (Dc). As a result, the weld strength increased with Dc to about 50%. The relationship between the weld strength and Dc made it possible to determine the V-notch depth, which vas defined as the “depth of the weld line.” From these results, a hypothesis is proposed that the V-notch has a structure with a fine groove on the surface and a poorly bonded inner layer. This study considered the relationships among the weld strength, the depth of the weld line, and molding conditions.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 161
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 944-949 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: An experimental study of crystallization kinetics and the influence of nucleating agents on the solidification of poly(p-phenylene sulfide) (PPS) is described. The effect of molecular weight is considered by investigating PPS samples having different viscosity levels. We studied the effect of a range of nucleating agents including aluminum oxide, calcium oxide, silicon dioxide, titanium dioxide, kaolin, and talc. All of these compounds were found to enhance the rate of crystallization; in particular, silicon dioxide, kaolin, and talc were the most effective nucleating agents. An effort to study particle size effects of the silicon dioxide showed that the nucleation was very sensitive to the source of the material. These studies did, however, show that nucleation rates tended to increase with decreasing particle size and increasing loading of silicon dioxide. Comparison of PPS crystallization rates with those of other polymers indicates that it crystallizes much more slowly than polyethylene or isotactic polypropylene and is slower than polyetherether-ketone, when comparisons are made on an equivalent basis. PPS crystallizes at similar rates to polyethylene terephthalate (PET). However, our nucleated PPS does not crystallize as rapidly as nucleated PET.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 162
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 937-943 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The interfacial activity of a hydrogenated polybutadiene-polystyrene tapered diblock copolymer, (HPB-b-PS) is investigated in blends of a low density polyethylene (LDPE) with a high impact polystyrene (HIPS) prepared in the melt state on a two-roll mill. Optical and scanning electron microscopy examinations of smoothed or fracture surfaces and also surfaces obtained after THF-extraction of PS phases demonstrate that the copolymer promotes the dispersion and interfacial adhesion of the components, whatever the composition and is able to create and stabilize particular dispersions of the rubber particles in these blends. Tensile and Charpy impact properties are also very significantly improved. All these features demonstrate that the ductility and toughness of PS and LDPE/PS blends can be closely controlled by adequate combinations of rubber particles and a HPB-b-PS copolymer.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 163
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 950-956 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The performance of a fluorocarbon elastomer processing additive in rutile-filled linear low density polyethylene (LLDPE) compounds was evaluated by capillary rheometry, and blown film extrusion. Different compounding sequences were considered and their effects on the performance of the processing additive in the presence of various rutiles examined. Lower apparent melt viscosities and higher shear rates for the onset of melt fracture were observed when using certain surface treated rutiles. The nature of the surface coating applied to rutiles was found to have a great influence on the Theological properties of the filled compounds and on the dispersibility of the solids. The acid-base characteristics of rutiles were determined by inverse gas chromatography techniques, and inherent agglomeration indexes for the pigments were measured by an application of powder rheology principles. It was found that those rutiles with high agglomeration indexes or those with highly basic surfaces interfered the most with the processing additive. Mechanisms by which rutile dispersibility and acid-base character influence the effectiveness of the fluorocarbon elastomer processing additive are discussed.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 164
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Fiber orientation induced by injection mold filling of short-fiber-reinforced thermoplastics (FRTP) causes anisotropy in material properties and warps molded parts. Predicting fiber orientation is important for part and mold design to produce sound molded parts. A numerical scheme is presented to predict fiber orientation in three-dimensional thin-walled molded parts of FRTP. Folgar and Tucker's orientation equation is used to represent planar orientation behavior of rigid cylindrical fibers in concentrated suspensions. The equation is solved about a distribution function of fiber orientation by using a finite difference method with input of velocity data from a mold filling analysis. The mold filling is assumed to be nonisothermal Hele-Shaw flow of a non-Newtonian fluid and analyzed by using a finite element method. To define a degree of fiber orientation, an orientation parameter is calculated from the distribution function against a typical orientation angle. Computed orientation parameters were compared with measured thermal expansion coefficients for molded square plates of glass-fiber-reinforced polypropylene. A good correlation was found.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 165
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1051-1055 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: This work deals with the effects of material and processing parameters on the mechanical behavior and morphology of noncompatlbilized polypropylene-polycarbonate (PP-PC) blends. The blends containing between 0 and 40 vol. percent of polycarbonate were compounded using a twin screw extruder and converted by injection molding using molds with rectangular as well as dogbone shaped cavities. The blends exhibit a complex skin-core morphology which evolves with the composition. Despite the absence of interfacial adhesion, the low strain modulus increases with PC concentration and follows approximately the Takayanagi model for systems with perfect adhesion. A slight increase of stiffness and strength with increasing PP/PC viscosity ratio is also observed. Weldline strength of these blends is generally poor and decreases with the increasing PC concentration.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 166
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1041-1050 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Poly(l,4-cyclohexylene dimethylene terephthalate) (PCT) exhibits superior heat deflection temperature when compared to conventional polyesters such as poly(butylene terephthalate) or poly(ethylene terephthalate). It is subject to degradation, however, at the processing temperatures normally employed to extrude or mold this material. Several approaches were taken to broaden the processing window of this material including: blending PCT with other crystalline and amorphous polymers to allow for lower processing temperatures, addition of conventional stabilizers, addition of crosslinking agents to maintain viscosity during processing and the addition of lubricants to improve processing. Key parameters included physical properties, rate of degradation, extruder torque measurements vs. time, and Differential Scanning Calorimetry (DSC) analysis (melting point and glass transition). All systems tested produced significant reduction of the intrinsic viscosity (molecular weight) for PCT during processing. The most successful approach was the blending of various polymers with PCT to lower extruder processing temperatures. Reductions in processing temperature may have resulted from improved heat transfer due to the presence of a lower melting polymer, reduction in melting point of the blend, or changes in the frictional characteristics of the PCT in the extruder. Transesterification may have played a role in compatibilizing some polyester mixtures. As expected, certain polymers had major'effects on the flow behavior of the blend. Tradeoffs were obtained in physical and thermal properties. A combined approach of polymer blending and the use of lubricants, stabilizers or crosslinking agent may hold the most promise for future development work. Thermal resistance under vapor phase soldering conditions was best for LCP/PCT blends and worst for PBT/PCT blends. Additional evaluations of the blend materials will include solvent resistance, processability, thermal resistance, dimensional stability, heat aging resistance, flammability, and specific end use tests.
    Additional Material: 5 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 167
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1056-1062 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Reactive extrusion of functionalized polymers provides a convenient, commercially attractive route for the preparation of copolymers useful in compatibilization of polymer blends. In the current study, the grafting chemistry of maleic anhydride to poly(phenylene oxide) in the absence of a radical initiator is contrasted to that of efficient quinone-methide trapping agents such as maleimides. In the case of maleic anhydride, functionalization is shown to occur randomly along the polymer backbone whereas maleimides react to give both main chain and end-group derivatives. Use of this anhydride-functionalized polyfphenylene oxide and an end-group functionalized analog in blends with polyamide-6,6 affords high levels of graft and diblock copolymers respectively, sufficient for the preparation of highly ductile materials. The properties of these polyamide blends are found to depend on the amount of copolymer formed during extrusion with final copolymer levels being in turn returned to the degree of anhydride functionalization. The properties and morphology of blends containing graft or diblock copolymers derived from main-chain and end-group functionality respectively, are rationalized in terms of the relative effectiveness of different copolymer structures in blend compatibilization.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 168
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1117-1124 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Inertial effects occurring In the impact testing of polymers were experimentally probed by measuring the force versus time response of various materials with two different instrumented impact testers, both with and without anvil. The analysis focused on the first force peak, which was modeled using a mass-spring analog to account for machine-specimen interaction.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 169
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1133-1139 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Birefringence is an important substrate property for optical data storage media. The basic definitions of birefringence and its relation to the chemical nature of polycarbonate are outlined. The polarizability of the monomer unit, expressed in the rheo-optical constant and the degree of remaining polymer chain orientation, determines the level of birefringence in polycarbonate disk substrates. Based on this theory, the theory of blending materials with positive and negative rheo-optical constants Is developed, and the current work with polycarbonate/polystyrene blends is reviewed. The biggest disadvantage of the reviewed system Js that only binary systems with low LCST (lower critical solution temperature) (〈240°C) can be formulated. Finally, we report on successful development work of a single-phase blend of a modified polycarbonate with a special styrene-acrylonitrile copolymer. The experimental results are compared with the theoretical expectations, and the implications on the injection molding of disk substrates are discussed.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 170
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 1151-1157 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A series of polymeric stannous dicarboxylates (i.e., suberate, sebacate, do-decanedioate, terephthalate, propoxyterephthalate, and isophthalate) has been synthesized from aqueous solution using various conditions of temperature (20, 50, and 98°C) and pH (6.4, 8.0, and 11.6). These were obtained as highly viscous adhesive-like emulsion phases when synthesized at 50 and 98°C. Polymeric stannous suberate when synthesized at pH 11.6 and temperature of 50°C crystallized to spherulites. When molten they behaved like hot-melt adhesives. They could be spun into fibers. On the other hand, melt-synthesized stannous dicarboxylates exhibit simple non-polymeric salt structures.
    Additional Material: 3 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 171
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 172
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Primary nucleation is in general heterogeneous in polymer crystallization. In unseeded polymers, the crystallization originates from a very small concentration (〈0.1 percent) of unknown submicroscopic heterogeneous nuclei. Only in three cases have the nucleation mechanisms been identified with precision. The first example is self-nucleation, which relates to the nucleation of a polymer melt by fragments of its own crystals previously present in the melt. Another example of heterogeneous nucleation is represented by epitaxial nucleation of polymers on inorganic and organic substrates recently established by Lotz and Wittmann. More recently, it was discovered that finely divided organic salts added to reactive polymers do not behave as inert heterogeneous substrates but rather dissolve and cut molten macromolecules producing ionic chain ends which precipitate into the melt and form organized aggregates which are the true nucleating species. It is clearly shown that mechanisms of physical and chemical origin are involved in heterogeneous primary nucleation of polymer crystallization.
    Additional Material: 13 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 173
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 257-262 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Lot-to-lot variations in a phenol/cresol-formaldehyde resin were fully characterized. Resin property-product hardness relationships were examined to elucidate the cause of variable hardness in product insulators and to establish acceptance criteria for the resin. A high methylol content (φCH2OH), determined by quantitative carbon-13 nuclear magnetic resonance (13C-NMR), and a narrow molecular weight distribution (MWD), determined by size exclusion chromatography, were found necessary for resin to produce insulator meeting the minimum Shore D durometer specification of 40.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 174
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 279-290 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The steady state and dynamic behavior of a continuous stirred tank reactor has been analyzed for free radical solution polymerization of styrene initiated by a mixture of two initiators having different thermal stabilities. From the steady state analysis of the reactor model with a mean residence time as a bifurcation parameter, four unique regions of steady state solutions are identified in an operating parameter space for a given initiator feed composition. A variety of complex bifurcation behavior such as multiple steady states, Hopf bifurcation and limit cycles have been observed and their stability characteristics have been analyzed. The effects of feed initiator composition and the concentration of the initiator in the feed stream on the reactor dynamics are also presented.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 175
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 249-255 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The dynamic mechanical response of adhesively bonded metal beams has been examined over a broad temperature range using a dynamic mechanical thermal analyzer (DMTA). The measured dynamic mechanical response of the bonded beam contains rich information about the viscoelastic properties of the adhesive resin such as glass transition temperatures. The measured storage moduli and loss factors of the bonded beams are very sensitive to changes in the properties of adhesive induced by exposing the beam specimens to environmental attack. Dynamic mechanical responses associated with dry adhesive resin, water plasticized resin, and aggregated water were observed for an electro-galvanized steel/epoxy beam exposed to water. The effect of the presence of an interfacial accommodation zone (IAZ) between adhesive resin and metal substrate was also examined; measured properties were very sensitive to the presence of a low modulus IAZ. It was successfully demonstrated in this study that the DMTA testing of bonded beams is a potentially useful tool for studying dynamic performance and durability of automotive adhesive joints.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 176
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 326-334 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Bulk compression flow of high density polyethylene (HDPE) and low density polyethylene (LDPE) have been measured at temperatures of 423 to 463K, pressure up to 150 MPa, and bulk compression rates of about 1.0 to 200.00 × 10-5 s-1. Bulk and surface compression modulus of elasticity (L and Ks), longitudinal bulk compression viscosity (ηL), and surface compression viscosity (ηKs) are described as a function of compression rates (kv and ks), compression deformations (kv percent and Ks percent), and temperature (T). Bulk and surface compression flow activation energies are of the order of 40 to 100 KJ/mol and 3.84 KJ/mol, respectively.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 177
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 341-349 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Binary blends of ethylene vinyl alcohol copolymers, containing 62 (EVOH-62) and 71 (EVOH-71) mole percent vinyl alcohols, with nylons (nylon-6, nylon-6/12, and nylon-12) have been prepared from melt mixing in a twin screw compounding machine. Morphological, thermal, rheological, and mechanical properties were determined. EVOH-62/nylon-6 and EVOH-71/nylon-6 blends showed homogeneous phase morphologies in the nylon-6-rich region, and fine phase separations (c.a. 2 × 10-7 m) in the EVOH-rich region. Melting point depression, positive deviations in viscosity and flexural modulus, and negative deviation in impact strength from the simple additive rule were generally observed. And the results were possibly interpreted in terms of compatibility and increased nylon/EVOH interactions over the nylon/nylon interactions. On the contrary, clean phase separations in large domains were observed from EVOH-71/nylon-6/12 and EVOH-71 /nylon-12 blends. Fibrillation was also obtained from EVOH rich blends. Probably due to the incompatible nature of these blends, yield at low rate of shear and a mechanical property drop were also observed.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 178
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 179
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 374-383 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: AC dielectric properties and thermally stimulated polarization (TSP) and depolarization (TSD) currents were studied in a series of CaCO3-filled polypropylene composites. The filler content (0 to 50 weight percent) and the average particle size (3.0 to 16.1 μm) at constant filler content (30 weight percent) were varied in separate groups of samples. In a third group of samples the filler (20 to 40 weight percent) was surface treated with stearates. The AC dielectric behavior of composites containing untreated fillers is largely determined by a small amount of adsorbed water. Upon heating, the dielectric properties show maxima (increasing with decreasing frequency) which disappear on cooling. In the case of stearate-treated fillers the dielectric loss level is higher, the dispersion and loss curves on heating reflect a combination of dipolar and protonic processes with water desorption. In the dry state the onset of an audio frequency relaxation process is observed in the pre-melting zone. The thermally stimulated currents of the composites containing treated and untreated fillers are also different. In the case of the untreated fillers the TSP curves show maxima indicating water desorption which are increasingly intense and roughly exponential with filler content. The high temperature conductivity and the intensity of the pre-melting depolarization peak pass through a minimum as a function of filler content. Above 20 weight percent filler content the activation energy of high temperature conductivity decreases. In the case of the surface treated samples, the thermally stimulated response is different for “wet” and dried samples. The dry samples exhibit a relaxation between the amorphous and crystalline transitions of the matrix polymer which is probably due to interfacial relaxation caused by the enhanced surface conductivity of the stearate-treated fillers.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 180
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 408-415 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A numerical method has been developed that takes the streamline finite difference method for modeling fully developed multilayer polymer flows and adds to it a simple means of accounting for nonisothermal conditions. In industrial practice, temperature control is often used to match material viscosities and, thereby, to avoid flow instabilities. By numerically calculating both viscosity ratios and normal stress difference ratios, the numerical method allows one to judge the relative stability of different flows and to choose an intelligent set of experiments when designing a coextrusion process. The algorithm has been successfully tested for a number of polymer melt constitutive equations in flows where the viscosity jumps no more than two orders of magnitude between fluids. Results for a rheologically well characterized polystyrene low-density polyethylene system and for an industrially interesting high-density polyethylene/Ultem system show that the common practice of matching zero-shear viscosities is overly simplistic when interface shear rate, conduction, normal stress, and flow rate effects are taken into account.
    Additional Material: 11 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 181
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 182
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 532-542 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Blends of two thermotropic liquid crystalline polymers (TLCPs), with brittle and ductile matrix materials were both injection molded and spun into fibers, in order to investigate the mechanism of in-situ mechanical reinforcement. In the injection molded samples, the TLCP was only moderately elongated into fibrils, and the mechanical properties were below predictions of the rule of mixtures. Fibers spun out of the blends contained numerous fine fibrils with nearly infinite aspect ratio, and as expected, the modulus increased linearly with the TLCP volume fraction, obeying the Tsai-Halpin equation for transversely isotropic composites. Wide angle X-ray diffraction measurements, as well as determination of the fiber-moduli, revealed that during spinning not only a macroscopic elongation of the fibrils was achieved, but also a considerable molecular orientation within the TLCP domains.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 183
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 527-531 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A commercial polycarbonate (PC)/acrylonitrile-butadiene-styrene (ABS) blend was reprocessed by injection molding to study the influence of reprocessing on the physical properties of the product. The modulus of elasticity and the yield stress are unaffected by reprocessing, whereas the break properties and the impact strength decrease. The effects observed are compared with those found in PC and ABS. The type of reactions taking place during reprocessing and the change of blend morphology are also discussed.
    Additional Material: 8 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 184
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 543-552 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Polyacetal (POM) toughening with thermoplastic polyurethane (TPU) elastomer was investigated in terms of Theological, mechanical, and morphological properties. Polyacetal can be effectively toughened by the blending with TPU elastomer and the improvement on toughness is found most significant with TPU content from 20 to 30 percent. POM does fracture in ductile mode under extremely low deformation rate and the ductile-brittle transition rate is at 0.5 mm/min. The transition rate is increased with the increase of elastomer content. The precrack hysteresis energy is important in dictating the failure mode. The experimental results show the hysteresis energy (under constant load) increases with the increase of elastomer content and the decrease of deformation rate. Greater hysteresis energy results in larger precrack plastic zone size and thus tends to shift the fracture mode from brittle to ductile as the critical size of the plastic zone is reached. The adoption of the slow rate fracture method has the advantages of ranking toughness of very brittle polymeric materials vs. the conventional Izod or Charpy impact method by varying temperatures. FTIR shows significant interaction between POM and TPU which is probably responsible for the TPU elastomer being such an efficient toughening agent for POM. Delamination in the buffer zone between the plane-strain and the plane-stress is discovered and the possible mechanism is discussed.
    Additional Material: 21 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 185
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 569-570 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Even restricting attention to weight distributions, it is ambiguous to merely say that a polymer is “not bimodal.” A simple example is shown wherein the weight distribution of log (molecular weight) is bimodal, but the weight distribution of molecular weight is not bimodal.
    Additional Material: 2 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 186
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 571-576 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: In a plasticating extruder, solid polymers are heated and are subjected to high pressures before they are melted and delivered to a die. In both the solids conveying and melting sections, these temperature and pressure increases will compact the unmelted polymer bed as it moves down the screw channel. Performance of the extruder depends in part on how well the screw design matches the compaction behavior of the resin for a given set of process conditions. The design of these screw sections, however, is often done based on past experience and with little knowledge of the resin compaction behavior. A much improved design would include screw performance prediction using variable bulk density and computer simulations. Computer simulations, however, are often performed using constant solid bulk density because of the lack of reliable density data as a function of both pressure and temperature. An instrument was developed for studying the compaction behavior of pellet and powder resins. Bulk densities and storage friction coefficients are reported for several important thermoplastic resins as a function of temperature and pressure. The bulk density data were fitted to a semi-empirical model.
    Additional Material: 9 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 187
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 577-586 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: An extensive set of stress relaxation and constant strain rate tests for characterizing the mechanical responses of a medium density polyethylene and a high density polyethylene that are commonly used in natural gas distribution piping is described and analyzed. The development of coherent master curves for the relaxation modulus, maximum stress, and the time-to-failure for pressurized pipes through a combination of both horizontal and vertical shifting is presented. The relaxation data are used to develop a nonlinear Viscoelastic material model. The model is assessed by making comparisons of the predicted stress-strain response with the measured response in the constant strain rate tests.
    Additional Material: 20 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 188
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 587-595 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: An engineering equation that describes the steady shear viscosity of polystyrene melts is developed as an extension of the well known power law model for non-Newtonian viscosity. The parameters in the equation have been related to weight and number averaged molecular weights and temperature. The model is tested on data for both narrow and broad molecular weight polystyrenes whose properties span most materials of commercial importance. This equation predicts the melt viscosity-shear rate behavior for both narrow and broad distribution polystyrenes from knowledge of weight and number averaged molecular weights and temperature. Our analysis directly yields shift factors for the shear rate and viscosity axes. Therefore, no secondary calculations are necessary to generate master curves for polystyrenes. The shift factors are related to weight and number averaged molecular weights of the polystyrenes and temperature of the melt.
    Additional Material: 10 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 189
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 596-602 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A series of commercial polystyrenes was tested using an instrumented impact tester to determine the fracture toughness Kc and critical strain energy release rate Gc. Over the range of Mw, 201,000 to 336,000, Kc increased from 1.38 MN/m3/2 to 1.76 MN/m3/2and Gc from 0.92 kJ/m2 to 1.60 kJ/m2. A linear correlation for Kc and Gc was seen with melt index, and an inverse relationship was obtained against molecular weight. Examination of the fracture surfaces revealed the presence of crack growth bands corresponding to the crack tip plastic zone size. It is suggested that these bands are the consequence of variations in crack growth along crazes that form in the crack tip stress field. As the crack propagates, the stress is relaxed locally, decreasing the growth rate allowing a new bundle of crazes to nucleate along which the crack advances. The spacing of these bands corresponds to the craze length formed in the plastic zone, and the band spacing increases with molecular weight.
    Additional Material: 12 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 190
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Fiber glass reinforced polyester parts compression molded from sheet molding compound (SMC) are prone to such surface inconsistencies as porosity and sinks. Even though it appears that some of these defects could be eliminated by techniques such as vacuum molding, the resulting surface, with current technology, is not yet consistently up to automotive standards for exterior body panels. In-mold coating (IMC) of SMC, is designed to fill porosity, reduce sinks, and furnish a primer-like coating, thus upgrading the part surface to automotive standards. As a consequence, IMC is generally an integral part of the molding cycle when producing compression molded SMC exterior automotive body panels. Most commonly, in-mold coating is injected after opening the press slightly so as to separate the mold cavity and the exterior surface of the part to make room for the coating. A second approach is to let the hydraulic pressure of the injected IMC open the mold. Here, we present a mathematical model of the process and show application in predicting injection pressures, fill times, and filling patterns. A comparison with experimental results is also presented. Cycle times required for IMC injection methods is also discussed.
    Additional Material: 14 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 191
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 192
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 684-692 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: A free radical copolymerization model is proposed for simulating the reaction rates and conversions of styrene monomer and unsaturated polyester resins during curing. This model is based on film theory in which the rate constants reflect both reaction and diffusion resistances. Differential scanning calorimetry in combination with Fourier transform infrared spectroscopy is used to measure the overall and individual reactivities of reacting species. Model parameters are determined from experimental data. The applicability of this model is demonstrated in a cure simulation.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 193
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The development of composites consisting of wood fibers and recycled plastics offers not only an opportunity to utilize an abundant natural resource but also a means to alleviate the serious plastics disposal problem. In this work, aspen fibers are incorporated into recycled high density polyethylene with a co-rotating inter-meshing twin-screw extruder to study processing-property relationships. Tensile, impact, and flexural strengths are measured as functions of fiber concentration. The effects of fiber pretreatment, screw configuration, and compounding temperature on the properties of composites are discussed.
    Additional Material: 16 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 194
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 701-706 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Experiments aimed at studying the mechanisms of agglomerate breakup due to the application of a simple shear flow field were performed in a cone and plate transparent device. Spherical compacts of carbon black (diameters 1-2 mm) in a range of different porosites were used in the experiments. Two distinct breakup mechanisms, denoted as “rupture” and “erosion”, were observed. The critical stress for erosion was found to be smaller than that for rupture. Once erosion starts, it continues for very long times. Rupture occurs shortly after reaching a critical stress and concludes abruptly. For this analysis of rupture, the dimen-sionless group \documentclass{article}\pagestyle{empty}\begin{document}$\alpha {\rm = \{ }\eta {\rm .}\mathop \gamma \limits^{\rm .} {\rm /K'}\phi ^{\rm 4} {\rm \} }$\end{document}, which is the ratio of applied stress to cohesive strength, was found to be a significant parameter for determining the final particle size distribution. The size analysis of fragments produced by shearing pellets for 1 minute showed a lognormal distribution function.
    Additional Material: 15 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 195
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 707-713 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: The composition dependence of tensile yield stress (σyc), and the effects of filler particle shape and surface treatment were investigated for polypropylene (PP) filled with CaCO3 or with Mg(OH)2. Poor adhesion between PP and CaCO3 accounted for a decrease of σyc with increasing σf. In spite of the poor adhesion between PP and Mg(OH)2, σyc either slowly decreased with increasing Vf or remained constant up to Vf = 0.25. Surface treatment of the fillers facilitated better dispersion in PP. On the other hand, σyc was reduced due to the lower thermodynamic work of adhesion (WA). The semiempirical one-parameter equation proposed by Turczanyi, Pukanszky, and Tüdüs (TPT) was considered plausible and was employed in the study of the effects of matrix-filler interaction.
    Additional Material: 6 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 196
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 714-720 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Effects of the variation of adhesion strength σA on the tensile yield behavior of particulate filled polypropylene (PP) were investigated. To enhance adhesion of PP toward calcium carbonate (CaCO3) and magnesium hydroxide (Mg(OH)2), maleated PP (MPP) was added to PP in various ratios. σA varied from 10-46 MPa. σA calculated from the Leidner-Woodhams model are in good agreement with SEM micrographs of the composite fracture surfaces. Dependences σyc vs. σA, at constant Vf = 0.18, were investigated and analyzed in terms of existing models. Using the Turczanyi, Pukanszky, Tüdös model (TPT) for the PP/CaCO3 composite, an effective interlayer “thickness” (teff) and the yield stress of the immobilized PP (σyi) were calculated. Both teff and σyi increased with enhancing of the adhesion.
    Additional Material: 4 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 197
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 198
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 721-733 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Poly(ethylene 2,6, naphthalene dicarboxilate), PEN, is very similar to poly(ethylene terephthalate), PET, in its chemical structure and was, therefore, expected to exhibit similar processing characteristics. We, however, observed a few problems during stretching of PEN, the most important of which was necking behavior at 145°C, which is between Tg (117°C) and Tcc (195°C). This is usually observed in PET only when it is stretched close to or below Tg. At temperatures between Tg and Tcc (cold crystallization temperature) PET stretches rather uniformly. The temperature window for film stretching appears to be rather wide, but our results indicate that this is not the case. Films stretched to high stretch ratios become uniform due to propagation and final disappearance of necks as a result of stress hardening. Our attempts at stretching these films at higher temperatures indicated that necking is eliminated, but so is stress induced crystallization, which causes stress hardening (unless high stretching rates are employed). The presence of stress hardening is essential for obtaining high quality, uniform films of these polymers. In addition, at high temperatures thermally activated crystallization which starts dominating the structure development, detrimentally affects the general appearance of the films. In brief, the PEN films we investigated have a narrower processing window than was anticipated based on their thermal behavior alone. At elevated temperatures the films are sensitive to the rate of stretching even more than typical PET processed at comparable conditions. The uniformity of the films depends on the stretch ratio, stretching mode, ratio(s) and rates and temperature. WAXS studies on the films indicate that the macromolecules packed into the low temperature crystal modification. In addition, WAXS pole figure studies suggest that naphthalene planes preferentially orient parallel to the film surface during biaxial stretching. The biaxially stretched films were observed to exhibit a bimodal chain orientation as evidenced by pole figure analysis of the (010) planes.
    Additional Material: 34 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 199
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990), S. 798-801 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Notes: Poly[2,2'-(m-phenylene)-5,5'-bibenzimidazole] (PBI) is shown to be miscible with poly(4-vinyl pyridine) over the entire composition range. Experiments were performed with commercial PBI as well as a lower molecular weight material synthesized by us. Blend miscibility is evidenced by single glass transition temperature intermediate between the pure polymers. Hydrogen bonding between the components was detected by infrared spectroscopy.
    Additional Material: 7 Ill.
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
  • 200
    Electronic Resource
    Electronic Resource
    Stamford, Conn. [u.a.] : Wiley-Blackwell
    Polymer Engineering and Science 30 (1990) 
    ISSN: 0032-3888
    Keywords: Chemistry ; Chemical Engineering
    Source: Wiley InterScience Backfile Collection 1832-2000
    Topics: Chemistry and Pharmacology , Mechanical Engineering, Materials Science, Production Engineering, Mining and Metallurgy, Traffic Engineering, Precision Mechanics , Physics
    Type of Medium: Electronic Resource
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...