ALBERT

All Library Books, journals and Electronic Records Telegrafenberg

X
feed icon rss

Your email was sent successfully. Check your inbox.

An error occurred while sending the email. Please try again.

Proceed reservation?

Export
Filter
  • Other Sources  (364)
  • SPACECRAFT PROPULSION AND POWER  (193)
  • AIRCRAFT DESIGN, TESTING AND PERFORMANCE  (171)
  • 1980-1984  (364)
  • 1950-1954
  • 1981  (364)
Collection
  • Other Sources  (364)
Source
Keywords
Years
  • 1980-1984  (364)
  • 1950-1954
Year
  • 1
    facet.materialart.
    Unknown
    EET theoretical design techniques (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: As a part of the EET aerodynamics program an out-of-house program was developed and monitored to provide theoretical procedures useful in the design of transport aircraft. The focus of the effort was to provide tools valid in the nonlinear transonic speed range. The effort was divided into two basic areas, inviscid configuration analysis and design procedures and viscous correction procedures.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Advan. Aerodyn.: Selected NASA Res.; p 79-94
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 2
    facet.materialart.
    Unknown
    F-111 TACT natural laminar flow glove flight results (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Improvements in cruise efficiency on the order of 15 to 40% are obtained by increasing the extent of laminar flow over lifting surfaces. Two methods of achieving laminar flow are being considered, natural laminar flow and laminar flow control. Natural laminar flow (NLF) relies primarily on airfoil shape while laminar flow control involves boundary layer suction or blowing with mechanical devices. The extent of natural laminar flow that could be achieved with consistency in a real flight environment at chord Reynolds numbers in the range of 30 x 10(6) power was evaluated. Nineteen flights were conducted on the F-111 TACT airplane having a NLF airfoil glove section. The section consists of a supercritical airfoil providing favorable pressure gradients over extensive portions of the upper and lower surfaces of the wing. Boundary layer measurements were obtained over a range of wing leading edge sweep angles at Mach numbers from 0.80 to 0.85. Data were obtained for natural transition and for a range of forced transition locations over the test airfoil.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Advan. Aerodyn.: Selected NASA Res.; p 11-20
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 3
    facet.materialart.
    Unknown
    Effect of heavy rain on aircraft (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: A summary on heavy rain effects on aircraft aerodynamics validation of research and some wind shear accidents in which heavy rain were an important factor. Frost formation and what frost does to the lift and drag curves for an airfoil was examined. If frost could cause severe aerodynamic problems for both general aviation and transport aircraft due to its roughness, then heavy rain produce a similar result. The influencing parameters of heavy rain on an aircraft are studied. Sources of aerodynamic roughness due to rain and wind shear and heavy rain accidents are outlined.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Marshall Space Flight Center Proc.: 5th Ann. Workshop on Meteorol. and Environ. Inputs to Aviation Systems 76-80 (SEE N82-21139 12-01)
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 4
    facet.materialart.
    Unknown
    Meteorology impact on future aircraft design (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: Meteorology impact on future aircraft design is discussed. Upcoming changes in both design and operations that will be influenced by the meteorological environment are outlined. Future and more nonconventional designs and meteorological impact brought about by operational changes over the next few years are examined.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Marshall Space Flight Center Proc.: 5th Ann. Workshop on Meteorol. and Environ. Inputs to Aviation Systems; p 29-34
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 5
    facet.materialart.
    Unknown
    Space shuttle main engine: Hydraulic system (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The hydraulic actuation system of the space shuttle main engine is discussed. The system consists of five electrohydraulic actuators and a single engine filter used to control the five different propellant valves, which in turn control thrust and mixture ratio of the space shuttle main engine. The hydraulic actuation system provides this control with a precision of 98.7 percent or an error in position no greater than 1.3 percent of full scale rotational travel for critical positions.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: the 15th Aerospace Mech. Symp.; p 291-301
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 6
    facet.materialart.
    Unknown
    SRB dewatering set (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: The system components and operation of the space shuttle solid rocket booster (SRB) dewatering set are described. The SRB dewatering set consists of a nozzle plug, control console, remote control unit, power distribution unit, umbilical cable, interconnect cables, and various handling and storage items. The nozzle plug (NP) is a remotely controlled, tethered underwater vehicle that is launched from the retrieval vessel (RV) by a crane, descends down the side of the SRB, and is positioned below the SRB nozzle. A TV camera mounted at the top of the NP central core is used by the control console operator to visually guide the NP during descent and docking. The NP is then driven up and locked into the nozzle. Compressed air is passed through the umbilical from the RV, through the NP and into the SRB motor. The water inside the SRB is expelled causing the SRB to rotate to a near horizontal attitude on the surface of the water.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA. Marshall Space Flight Center The 15th Aerospace Mech. Symp.; p 279-289
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 7
    facet.materialart.
    Unknown
    Zero gravity testing of flexible solar arrays (1981)
    In:  CASI
    Details
    Publication Date: 2006-01-16
    Description: Zero gravity testing in the KC-135 aircraft of flat fold flexible solar array test specimens sufficiently demonstrated the adequacy of the panel design. The aircraft flight crew provided invaluable assistance and significantly contributed to the design and development of the flexible solar array, and ultimately to the potential success of the solar electric propulsion solar array shuttle flight experiment program.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: The 15th Aerospace Mech. Symp.; p 115-136
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 8
    facet.materialart.
    Unknown
    Meteorological impact on aviation fuel efficiency (1981)
    In:  CASI
    Details
    Publication Date: 2006-02-14
    Description: The connection between fuel consumption and weather data is discussed. Fuel efficient flights creating adequate near real time weather information are examined. The lack of highly resolved real time and near real time wind and temperature data at flight altitudes is investigated. The existing systems, which is based on twice a day balloon observations, supplemented by pilot reports or other occasional data, is not adequate for optimum flight planning. The impacts of upper winds and temperatures on fuel efficiency and flight planning are not widely appreciated and developing new weather products are considered.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Marshall Space Flight Center Proc.: 5th Ann. Workshop on Meteorol. and Environ. Inputs to Aviation Systems; p 15-19
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 9
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Radiation transfer with scattering (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 10
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Prediction techniques with scattering (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 11
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Spatial integration procedures (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 12
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Spectrally averaged parameters (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 11 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 13
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Band models (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 22 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 14
    facet.materialart.
    Unknown
    Plume radiation heat transfer: Fundamentals (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 15 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 15
    facet.materialart.
    Unknown
    Plume radiation heat transfer (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 16
    facet.materialart.
    Unknown
    Base flow simulation: Hot flow simulation for base heating analysis (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 17
    facet.materialart.
    Unknown
    Base flow simulation (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 18
    facet.materialart.
    Unknown
    Base flow simulation: Cold flow simulation for base pressure analysis (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 21 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 19
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Impingement environments (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 20
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Impingement flowfields (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 6 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 21
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Free molecular plumes (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 4 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 22
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Onset of rarefaction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 23
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Viscous - inviscid coupling (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 10 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 24
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Continuumm plume (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 25
    facet.materialart.
    Unknown
    Multiple engines: Non-symmetrical engine arrangements (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 25 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 26
    facet.materialart.
    Unknown
    Plume backflow in a vacuum: Nozzle boundary layers (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 7 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 27
    facet.materialart.
    Unknown
    Multiple engines: Dual engines (in-line multiple engines) (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 33 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 28
    facet.materialart.
    Unknown
    Multiple engines: Symmetrical engine arrangements (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 100 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 29
    facet.materialart.
    Unknown
    Multiple engines (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 30
    facet.materialart.
    Unknown
    Single engine (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 109 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 31
    facet.materialart.
    Unknown
    Single engine: Plume induced flow separation (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 39 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 32
    facet.materialart.
    Unknown
    Recommended procedure for selecting methodology (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 12 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 33
    facet.materialart.
    Unknown
    Methodology selection plan (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 13 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 34
    facet.materialart.
    Unknown
    Historical development of base flow predictive methods (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 19 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 35
    facet.materialart.
    Unknown
    JANNAF Handbook: Rocket Exhaust Plume Technology. Chapter 5: Base flow. Problem definition (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 27 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 36
    facet.materialart.
    Unknown
    JANNAFF Handbook: Rocket Exhaust Plume Technology. Chapter 5: Base flow. Nomenclature (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAFF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 37
    facet.materialart.
    Unknown
    JANNAF Handbook: Rocket exhaust plume technology. Chapter 5: Base flow. Introduction (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-19
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JANNAFF Handbook: Rocket Exhaust Plume Technol., Chapter 5; 5 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 38
    facet.materialart.
    Unknown
    Measuring the spacecraft and environmental interactions of the 8-cm mercury ion thrusters on the P80-1 mission (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The subject interface measurements are described for the Ion Auxiliary Propulsion System (IAPS) flight test of two 8-cm thrusters. The diagnostic devices and the effects to be measured include: 1) quartz crystal microbalances to detect nonvolatile deposition due to thruster operation; 2) warm and cold solar cell monitors for nonvolatile and volatile (mercury) deposition; 3) retarding potential ion collectors to characterize the low energy thruster ionic efflux; and 4) a probe to measure the spacecraft potential and thruster generated electron currents to biased spacecraft surfaces. The diagnostics will also assess space environmental interactions of the spacecraft and thrusters. The diagnostic data will characterize mercury thruster interfaces and provide data useful for future applications.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 39
    facet.materialart.
    Unknown
    Chasing the Space Shuttle (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The use and modifications of the T-38 aircraft as chase planes for the STS-1 landing are discussed. Two planes tracked the approach at Edwards AFB, with the lead plane responsible for airspeed and altimetry calibration, technical photography, landing gear status, and height-above-touchdown calls; the second T-38 provided live TV and back-up. Modifications included extension of the landing gear extension speed, increasing the area of the speedbrakes, and installation of a TV system; the goal was to stay with the Shuttle below 40,000 ft while it descended at 15,000 ft/min. Ten T-38's were modified and the deployment of lead and back-up crews during the first Shuttle flight is outlined. Western Test Range C-band radar data of the Orbiter position were transformed into intercept coordinates and VHF relayed to the chase craft. Photographs were taken of the right and left sides and underside of the Shuttle while flying with the speedbrake up to match the Shuttle speed.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 40
    facet.materialart.
    Unknown
    Development of a comprehensive analysis for rotorcraft. II - Aircraft model, solution procedure and applications (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of a comprehensive analytical model of rotorcraft aerodynamics and dynamics is described. Particular emphasis is given to describing the reasons behind the choices and decisions involved in constructing the model. The analysis is designed to calculate rotor performance, loads and noise; helicopter vibration and gust response; flight dynamics and handling qualities; and system aeroelastic stability. It is intended for use in the design, testing and evaluation of a wide class of rotors and rotorcraft and to be the basis for further development of rotary wing theories. The general characteristics of the geometric, structural, inertial and aerodynamic models used for the rotorcraft components are described, including the assumptions introduced by the chosen models and the resulting capabilities and limitations. Finally, some examples from recent applications of the analysis are given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Vertica; 5; 3, 19; 1981
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 41
    facet.materialart.
    Unknown
    Design for supercommuters (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Action to be taken to prepare to implement efficient, modern commuter aircraft for the 1990s is outlined. The increase in the contribution of jet fuel costs to aircraft direct operating costs (DOC) is noted as the motivation for the introduction of turboprop-powered commuter aircraft, which use 15-20% less fuel per seat mile at short stage lengths, to replace larger jet transports. Designs proposed by various manufacturers which will make use of existing technology for 19-, 30- and 50-seat aircraft capable of carrying a full payload of passengers and baggage for 600 n mi and optimized for minimum DOC over a 100-n mi stage length are presented, and the improvements in fuel usage, DOC and passenger comfort to be obtained with the use of advanced technology are pointed out. The goals and considered technologies of the dedicated small-transport aircraft technology program recommended by a commuter air transport subcommittee of the NASA Advisory Council Aeronautics Advisory Committee to speed the development of commuter technology are then presented, with attention given to efforts of analysis, design and testing of propulsion systems, structures, aerodynamics and systems intended to result in 16-24% savings in DOC and up to 40% savings in fuel. The commuter development plans of various manufacturers are also indicated.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Astronautics and Aeronautics; 19; Feb. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 42
    facet.materialart.
    Unknown
    General aviation airplane fuel economy system model (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The aerodynamic characteristics which affect the fuel consumption of general aviation aircraft are outlined. All data are presented in the form of graphs.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Joint Univ. Program for Air Transportation Res., 1980; p 133-142
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 43
    facet.materialart.
    Unknown
    Influence of landing gear flexibility on aircraft performance during ground roll (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An analysis is made of the influence of landing gear deflection characteristics on aircraft performance on the ground up to rotation. A quasi-steady dynamic equilibrium state is assumed, including other simplifying assumptions such as calm air conditions and normal aircraft lift and drag. Ground incidence is defined as the angle made by the mean aerodynamic chord of the wing with respect to the ground plane, and equations are given for force and balance which determine the quasi-equilibrium conditions for the aircraft during ground roll. Results indicate that the landing gear deflections lead to a substantial increase in the angle of attack, and the variation in the ground incidence due to landing gear flexibility could be as much as + or - 50%, and the reduction in tail load requirements almost 25%.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 18; Nov. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 44
    facet.materialart.
    Unknown
    Finite element thermal analysis of convectively-cooled aircraft structures (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The design complexity and size of convectively-cooled engine and airframe structures for hypersonic transports necessitate the use of large general purpose computer programs for both thermal and structural analyses. Generally thermal analyses are based on the lumped-parameter finite difference technique, and structural analyses are based on the finite element technique. Differences in these techniques make it difficult to achieve an efficient interface. It appears, therefore, desirable to conduct an integrated analysis based on a common technique. A summary is provided of efforts by NASA concerned with the development of an integrated thermal structural analysis capability using the finite element method. Particular attention is given to the development of conduction/forced-convection finite element methodology and applications which illustrate the capabilities of the developed concepts.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 45
    facet.materialart.
    Unknown
    Predicted airframe noise levels for certification flights (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A correction is presented for a previously published inconsistency in predicted airframe noise values, which were based on approach velocities lower than those required for FAA certification. New figures are given for the following aircraft: DC-9-30, 727-200, A300-B2, L-1011, DC-10-10, and 747-200B. The new levels average 2.3 dB higher than those calculated for typical approach speeds.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Aircraft; 18; Sept
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 46
    facet.materialart.
    Unknown
    Development of a comprehensive analysis for rotorcraft. I - Rotor model and wake analysis (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The development of a comprehensive analytical model of rotorcraft aerodynamics and dynamics is described. Particular emphasis is given to describing the reasons behind the choices and decisions involved in constructing the model. The analysis is designed to calculate rotor performance, loads and noise; helicopter vibration and gust response; flight dynamics and handling qualities; and system aeroelastic stability. It is intended for use in the design, testing and evaluation of a wide class of rotors and rotorcraft, and to be the basis for further development of rotary wing theories. The general characteristics of the geometric, structural, inertial, and aerodynamic models used for the rotorcraft components are described, including the assumptions introduced by the chosen models and the resulting capabilities and limitations. Finally, some examples from recent applications of the analysis are given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Vertica; 5; 2, 19; 1981
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 47
    facet.materialart.
    Unknown
    Aircraft design using the National Transonic Facility (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The utility of the cryogenic high Reynolds number test facility as a production tunnel is evaluated. Aerodynamic performance evaluation, numerical wing design verification, and high Reynolds number theoretical extensions are considered. A priority ranking of NTF uses from an airframe development viewpoint is presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center High Reynolds Number Res. - 1980; p 149-152
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 48
    facet.materialart.
    Unknown
    Technology development status at McDonnell Douglas (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The significant technology items of the Concorde and the conceptual MCD baseline advanced supersonic transport are compared. The four major improvements are in the areas of range performance, structures (materials), aerodynamics, and in community noise. Presentation charts show aerodynamic efficiency; the reoptimized wing; low scale lift/drag ratio; control systems; structural modeling and analysis; weight and cost comparisons for superplasticity diffusion bonded titanium sandwich structures and for aluminum brazed titanium honeycomb structures; operating cost reduction; suppressor nozzles; noise reduction and range; the bicone inlet; a market summary; environmental issues; high priority items; the titanium wing and fuselage test components; and technology validation.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Supersonic Cruise Res., 1979, Pt. 2; p 873-888
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 49
    facet.materialart.
    Unknown
    An assessment of buffer strips for improving damage tolerance (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Graphite/epoxy panels with buffer strips were tested in tension to measure their residual strength with crack-like damage. Panels were made with 45/0/-45/90(2S) and 45/0/450(2S) layups. The buffer strips were parallel to the loading directions. They were made by replacing narrow strips of the 0 deg graphite plies with strips of either 0 deg S-Glass/epoxy or Kevlar-49/epoxy on either a one for one or a two for one basis. In a third case, O deg graphite/epoxy was used as the buffer material and thin, perforated Mylar strips were placed between the 0 deg piles and the cross-plies to weaken the interfaces and thus to isolate the 0 deg plies. Some panels were made with buffer strips of different widths and spacings. The buffer strips arrested the cracks and increased the residual strengths significantly over those plain laminates without buffer strips. A shear-lag type stress analysis correctly predicted the effects of layups, buffer material, buffer strip width and spacing, and the number of plies of buffer material.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Supersonic Cruise Res., 1979, Pt. 2; p 657-673
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 50
    facet.materialart.
    Unknown
    Supersonic cruise research aircraft structural studies: Methods and results (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: NASA Langley Research Center SCAR in-house structural studies are reviewed. In methods development, advances include a new system of integrated computer programs called ISSYS, progress in determining aerodynamic loads and aerodynamically induced structural loads (including those due to gusts), flutter optimization for composite and metal airframe configurations using refined and simplified mathematical models, and synthesis of active controls. Results given address several aspects of various SCR configurations. These results include flutter penalties on composite wing, flutter suppression using active controls, roll control effectiveness, wing tip ground clearance, tail size effect on flutter, engine weight and mass distribution influence on flutter, and strength and flutter optimization of new configurations. The ISSYS system of integrated programs performed well in all the applications illustrated by the results, the diversity of which attests to ISSYS' versatility.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Supersonic Cruise Res., 1979, Pt. 2; p 617-656
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 51
    facet.materialart.
    Unknown
    Opportunities for structural improvements for an advanced supersonic transport vehicle (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The superplastically formed diffusion-bonded (SPF/DB) program has developed successfully and far enough to recommend that a major structural program to validate the weight and cost of SPF/DB sandwich titanium structure should be initiated. The NASA Langley study of wing and fuselage SPF/DB sandwich panels shows that this process is potentially structurally efficient. The Douglas SPF/DB expanded sandwich process that utilizes a welded core sheet that expands to face sheets proves to be very efficient. The theoretical weight optimization design charts for the wing and fuselage concepts were validated by small-scale tests. Mnay design applications were fabricated. Projecting the results of an SPF/DB sandwich airframe structure to a MDC AST design shows significant weight and cost savings. A 6 percent lower direct operating cost was calculated. A growth AST utilizing composites, metal matrices, and SPF/DB sandwich shows future promise for a post-1990 technology readiness. Titanium SPF/DB sandwich, compared to presently available aluminum structure, is superior for application to a Mach 2.2 supersonic transport.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Supersonic Cruise Res., 1979, Pt. 2; p 589-616
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 52
    facet.materialart.
    Unknown
    Ion thruster plume effects on spacecraft surfaces (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A charge-exchange plasma, generated by an ion thruster, is capable of flowing upstream from the ion thruster and therefore represents a source of contamination to a spacecraft. An analytical model of the charge-exchange plasma density around a spacecraft was used to estimate the contamination which various spacecraft materials may be exposed to. Measurements of plasma density around an ion thruster were compared to this model. Results of experimental studied regarding the effects on various spacecraft materials' properties due to exposure to expected mercury contamination levels are presented.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 231-241
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 53
    facet.materialart.
    Unknown
    Ion plume/S-band carrier interaction study (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: A study was performed to determine the effects of a mercury ion thruster plume on an S-band telecommunication carrier. Experiments were carried out on a 30 cm thruster in a JPL test chamber. Results from simple analytical models were compared with the above measurements and major discrepancies were discovered. Modifications to the electron density model provided a qualitative explanation, but further work is necessary for a quantitative answer. The results indicate the effects of the plume, on S and X Band telecommunications will be minor, with the possible exception of critical angle blockage.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 191-215
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 54
    facet.materialart.
    Unknown
    Electromagnetic interference assessment of an ion drive electric propulsion system (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: An electric propulsion thrust system has the capability of providing a high specific impulse for long duration scientific missions in space. The EMI from the elements of an ion engine was characterized. The compatibility of ion drive electric propulsion systems with typical interplanetary spacecraft engineering was predicted.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 185-190
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 55
    facet.materialart.
    Unknown
    Radiated and conducted EMI from a 30-cm ion thruster (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: In order to properly assess the interaction of a spacecraft with the EMI environment produced by an ion thruster, the EMI environment was characterized. Therefore, radiated and conducted emissions were measured from a 30-cm mercury ion thruster. The ion thruster beam current varied from zero to 2.0 amperes and the emissions were measured from 5 KHz to 200 MHz. Several different types of antennas were used to obtain the measurements. The various measurements that were made included: magnetic field due to neutralizer/beam current loop; radiated electric fields of thruster and plume; and conducted emissions on arc discharge, neutralizer keeper and magnetic baffle lines.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 167-183
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 56
    facet.materialart.
    Unknown
    Facility produced charge-exchange ions (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: These facility produced ions are created by charge-exchange collisions between neutral atoms and energetic thruster beam ions. The result of the electron transfer is an energetic neutral atom and an ion of only thermal energy. There are true charge-exchange ions produced by collisions with neutrals escaping from the ion thruster and being charge-exchange ionized before the neutral intercepts the tank wall. The facility produced charge-exchange ions will not exist in space and therefore, represent a source of error where measurements involving ion thruster plasmas and their density are involved. The quantity of facility produced ions in a test chamber with a 30 cm mercury ion thruster was determined.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 147-166
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 57
    facet.materialart.
    Unknown
    Propagation of charge-exchange plasma produced by an ion thruster (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Under the proper conditions there is an end-effect of a long, cylindrical Langmuir probe which allows a significant increase in collected ion current when the probe is aligned with a flowing plasma. This effect was used to determine the charge-exchange plasma flow direction at various locations relative to the ion thruster. The ion current collected by the probe as a function of its angle with respect to the plasma flow allows determination of the plasma density and plasma flow velocity at the probe's location upstream of the ion thruster optics. The density values obtained from the ion current agreed to within a factor of two of density values obtained by typical voltage-current Langmuir probe characteristics.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 67-72
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 58
    facet.materialart.
    Unknown
    Solar array/spacecraft biasing (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: Biasing techniques and their application to the control of spacecraft potential is discussed. Normally when a spacecraft is operated with ion thrusters, the spacecraft will be 10-20 volts negative of the surrounding plasma. This will affect scientific measurements and will allow ions from the charge-exchange plasma to bombard the spacecraft surfaces with a few tens of volts of energy. This condition may not be tolerable. A proper bias system is described that can bring the spacecraft to or near the potential of the surrounding plasma.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 11-28
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 59
    facet.materialart.
    Unknown
    Exploratory flight test of advanced piloted spacecraft - Circa 1963 (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The NASA early experimental program for parawing and lifting body spacecraft recovery concepts is discussed. Simple hand drawings, in-house construction, and crude drop tests were used in lieu of a thorough stress analysis. The parawing (parasev) was controlled by manually shifting the center of gravity with respect to the center of pressure; the craft would take off while being towed at 40 KIAS. The M-2 lifting body was originally constructed with a 3/32 in. mahogany skin by a glider manufacturer and employed general aviation aircraft nose and main wheel assemblies. A minimum altitude of 200 ft was found acceptable for release of the parasev, allowing the pilot time to adjust for transients incurred at the tow release. A small landing assist rocket was furnished for the M-2/F-2 and X-24A lifting bodies to enhance stability, and landings at a maximum lift/drag ratio of 2.8 were successfully completed. The data gained were eventually applied in the development of the Shuttle.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 60
    facet.materialart.
    Unknown
    The X-14 - 24 years of V/STOL flight testing (1981)
    In:  Other Sources
    Details
    Publication Date: 2011-08-18
    Description: The X-14 V/STOL research aircraft made its first free-hover flight as a proof-of-concept test-bed on Feb. 19, 1957. With the exception of two subsequent modification periods (to X-14A and X-14B) this V/STOL 'workhorse' has been on continuous flight-test status as a research aircraft and flying classroom. The paper presents some of the highlights of its memorable 24-year flight-test career with special emphasis on projects which have contributed to V/STOL technology and on the test pilots who made it happen.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 61
    facet.materialart.
    Unknown
    Some applications of aerodynamic formulations to problems in aircraft dynamics (1981)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: Two applications of mathematical modeling to aerodynamic problems are cussed. The first application is an investigation of the capacity of a nonlinear aerodynamic mathematical model to describe the aerodynamic reactions on an airfoil with a deflecting flap in transonic flow. Flow field computational methods are used to evaluate the nonlinear, unsteady aerodynamic data in terms of characteristic motions called for by the model. Histories of unconstrained motions of the flap are generated from the flap equations of motion, with the aerodynamic reactions specified by the mathematical model. In the second application wing rock is investigated. The most recent model accommodates experimental results wing rock by admitting the existence of aerodynamic hysteresis in the variation of the steady state rolling moment coefficient with roll angle is described.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Dyn. Stability Parameters; 15 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 62
    facet.materialart.
    Unknown
    Aerodynamic mathematical modeling - basic concepts (1981)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: The mathematical modeling of the aerodynamic response of an aircraft to arbitrary maneuvers is reviewed. Bryan's original formulation, linear aerodynamic indicial functions, and superposition are considered. These concepts are extended into the nonlinear regime. The nonlinear generalization yields a form for the aerodynamic response that can be built up from the responses to a limited number of well defined characteristic motions, reproducible in principle either in wind tunnel experiments or flow field computations. A further generalization leads to a form accommodating the discontinuous and double valued behavior characteristics of hysteresis in the steady state aerodynamic response.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Dyn. Stability Parameters; 31 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 63
    facet.materialart.
    Unknown
    Practical aspects of instrumentation installation in support of subsystem testing (1981)
    In:  CASI
    Details
    Publication Date: 2017-10-02
    Description: Some of the problems associated with using military specification MIL-W-5088H as a guideline for wire gage selection are discussed. Examples of proper use of this specification as a criterion for interfacting wire bundles and connectors are provided. The quantitative results of 22 projects that have used the technique known as sneak analysis are reviewed and examples are given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: AGARD Subsystem Testing and Flight Test Instr.; 16 p
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 64
    facet.materialart.
    Unknown
    Overview of advanced wing design (1981)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Examples of experiment theory correlation are presented to give an indication of the capabilities and limitations of wing design and analysis for transonic applications by potential flow theory. The examples include correlations of experimental pressure distributions with theoretical results from isolated wing codes and wing-body codes. Both conservative and non conservative differencing as well as body and boundary layer corrections are considered. A full potential isolated wing code correlates well with data from an isolated wing test but may give poor prediction of the aerodynamic characteristics of some wing-body configurations. Potential flow wing body codes were found to improve the correlation for the wing-body configurations considered.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Advan. Aerodyn. and Active Controls; p 157-169
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 65
    facet.materialart.
    Unknown
    Status and future plans of the Drones for Aerodynamic and Structural Testing (DAST) program (1981)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Results from flight tests of the ARW-1 research wing are presented. Preliminary loads data and experiences with the active control system for flutter suppression are included along with comparative results of test and prediction for the flutter boundary of the supercritical research wing and on performance of the flutter suppression system. The status of the ARW-2 research wing is given.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Advan. Aerodyn. and Active Controls; p 21-36
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 66
    facet.materialart.
    Unknown
    Small transport aircraft technology (1981)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The results of contracted studies identifying the potential benefits of advanced technology are presented. Current in house studies and research efforts are discussed. An overview of the proposed technology elements in STAT research is presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Advan. Aerodyn. and Active Controls; p 85-104
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 67
    facet.materialart.
    Unknown
    KC-135 winglet flight results (1981)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: Three KC-135 winglet configurations were flight tested for cant/incidence angles of 15 deg/-4 deg, 15 deg/-2 deg, and 0 deg/-4 deg, as well as the basic wing. The flight results for the 15 deg/-4 deg and basic wing configurations confirm the wind tunnel predicted 7% incremental decrease in total drag at cruise conditions. The 15 deg/-4 configuration flight measured wing and winglet pressure distributions, loads, stability and control, flutter, and buffet also correlate well with predicted values. The only unexpected flight results as compared with analytical predictions is a flutter speed decrease for the 0 deg/-4 deg configuration. The 15 deg/-2 deg configuration results show essentially the same incremental drag reduction as the 15 deg/-4 deg configuration; however, the flight loads are approximately 30% higher for the 15 deg/-2 deg configuration. The drag data for the 0 deg/-4 deg configuration show only a flight drag reduction.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA. Langley Research Center Advan. Aerodyn. and Active Controls; p 145-156
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 68
    facet.materialart.
    Unknown
    Investigation of powered nacelles on a high aspect ratio NASA supercritical wing, phase 2 (1981)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: A modified wing with the long core separate flow nacelle and several E(3) nacelles was utilized. The effects of nacelle and pylon cant angles and nacelle longitudinal and vertical location were investigated over a Mach number range from 0.70 to 0.83. The results at the cruise condition 0.82 Mach number and 0.55 lift coefficient are presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Advan. Aerodyn. and Active Controls; p 105-122
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 69
    facet.materialart.
    Unknown
    Transport aircraft flying qualities activities (1981)
    In:  CASI
    Details
    Publication Date: 2016-06-07
    Description: The optimal control model for pilot vehicle systems was used to develop a methodology for predicting pilot ratings for commercial transports. The method was tested by applying it to a family of transport configurations for which subjective pilot ratings were obtained. Specific attention is given to the development of the simulator program and procedures so as to yield objective and subjective performance data useful for a critical evaluation of the analytical method.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Advan. Aerodyn. and Active Controls; p 37-42
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 70
    facet.materialart.
    Unknown
    Experimental investigation of elastic mode control on a model of a transport aircraft (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A 4.5 percent DC-10 derivative flexible model with active controls is fabricated, developed, and tested to investigate the ability to suppress flutter and reduce gust loads with active controlled surfaces. The model is analyzed and tested in both semispan and complete model configuration. Analytical methods are refined and control laws are developed and successfully tested on both versions of the model. A 15 to 25 percent increase in flutter speed due to the active system is demonstrated. The capability of an active control system to significantly reduce wing bending moments due to turbulence is demonstrated. Good correlation is obtained between test and analytical prediction.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-3472 , NAS 1.26:3472
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 71
    facet.materialart.
    Unknown
    Airborne method to minimize fuel with fixed time-of-arrival constraints (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-06-28
    Description: A method for generating a minimum-fuel, fixed-range, fixed-time-of-arrival flight path in an on-board flight management system computer for commercial aircraft is described. It is shown that up to 6% of the fuel otherwise used can be saved by means of this capability, despite time-of-arrival delays of up to 30 min, by a medium-range, tri-jet transport aircraft.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: Journal of Guidance and Control; 4; May-June
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 72
    facet.materialart.
    Unknown
    Feasibility study of LITVC for shuttle SRB (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A liquid injection thrust vector control (LITVC) system for the shuttle solid rocket booster (SRB) was analyzed. The LITVC was compared with the SRB baseline flexible seal. A table of LITVC advantages and disadvantages is presented. It is concluded that the LITVC performs well at low to moderate duty cycles, but not for high duty cycle requirements.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-TP-1912 , M-354
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 73
    facet.materialart.
    Unknown
    Orbit transfer vehicle engine study, phase A, extension 1: Volume 2: Study results (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Because of the advantage of the Advanced Expander Cycle Engine brought out in initial studies, further design optimization and comparative analyses were undertaken. The major results and conclusion derived are summarized. The primary areas covered are (1) thrust chamber geometry optimization, (2) expander cycle optimization, (3) alternate low thrust capability, (4) safety and reliability, (5) development risk comparison, and (6) cost comparisons. All of the results obtained were used to baseline the initial design concept for the OTV Advanced Expander Cycle Engine Point Design Study.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-161699 , REPT-32999-F-E1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 74
    facet.materialart.
    Unknown
    AIRCL: A programmed system for generating NC tapes for airplane models. User's manual (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A computer program is presented which calculates the cutter location file needed to machine models of airplane wings or wing-fuselage combinations on numerically controlled machine tools. Input to the program is a data file consisting of coordinates on the fuselage and wing. From this data file, the program calculates tool offsets, determines the intersection between wing and fuselage tool paths, and generates additional information needed to machine the fuselage and/or wing. Output from the program can be post processed for use on a variety of milling machines. Information on program structure and methodology is given as well as the user's manual for implementation of the program.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-165687
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 75
    facet.materialart.
    Unknown
    A study of high-altitude manned research aircraft employing strut-braced wings of high-aspect-ratio (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The effect of increased wing aspect ratio of subsonic aircraft on configurations with and without strut bracing. Results indicate that an optimum cantilever configuration, with a wing aspect ratio of approximately 26, has a 19% improvement in cruise range when compared to a baseline concept with a wing aspect ratio of approximately 10. An optimum strut braced configuration, with a wing aspect ratio of approximately 28, has a 31% improvment in cruise range when compared to the same baseline concept. This improvement is mainly due to the estimated reduction in wing weight resulting from use of lifting struts. All configurations assume the same mission payload and fuel. The drag characteristics of the wings are enhanced with the use of laminar flow airfoils. A method for determining the extent of attainable natural laminar flow, and methods for preliminary structural design and for aerodynamic analysis of wings lifting struts are presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-159262
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 76
    facet.materialart.
    Unknown
    Some effects of thermal-cycle-induced deformation in rocket thrust chambers (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The deformation process observed in the hot gas side wall of rocket combustion chambers was investigaged for three different liner materials. Five thrust chambers were cycled to failure by using hydrogen and oxygen as propellants at a chamber pressure of 4.14 MN/cu m. The deformation was observed nondestructively at midlife points and destructively after failure occurred. The cyclic life results are presented with an accompanying discussion about the problems of life prediction associated with the types of failures encountered in the present work. Data indicating the deformation of the thrust chamber liner as cycles are accumulated are presented for each of the test thrust chambers. From these deformation data and observation of the failure sites it is evident that modeling the failure process as classic low cycle thermal fatigue is inadequate as a life prediction method.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-TP-1834 , E-553
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 77
    facet.materialart.
    Unknown
    Dual nozzle aerodynamic and cooling analysis study (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Analytical models to predict performance and operating characteristics of dual nozzle concepts were developed and improved. Aerodynamic models are available to define flow characteristics and bleed requirements for both the dual throat and dual expander concepts. Advanced analytical techniques were utilized to provide quantitative estimates of the bleed flow, boundary layer, and shock effects within dual nozzle engines. Thermal analyses were performed to define cooling requirements for baseline configurations, and special studies of unique dual nozzle cooling problems defined feasible means of achieving adequate cooling.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-161677 , REPT-33553F
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 78
    facet.materialart.
    Unknown
    Integrated Application of Active Controls (IAAC) Technology to an Advanced Subsonic Transport: Project Plan (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The state of the art of active controls technology (ACT) and a recommended ACT development program plan are reviewed. The performance benefits and cost of ownership of an integrated application of ACT to civil transport aircraft is to be assessed along with the risk and laboratory and/or flight experiments designed to reduce the technical risks to a commercially acceptable level.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-3305 , D6-46691
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 79
    facet.materialart.
    Unknown
    The role of the research simulator in the systems development of rotorcraft (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The potential application of the research simulator to future rotorcraft systems design, development, product improvement evaluations, and safety analysis is examined. Current simulation capabilities for fixed-wing aircraft are reviewed and the requirements of a rotorcraft simulator are defined. The visual system components, vertical motion simulator, cab, and computation system for a research simulator under development are described.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TM-81276 , USAAVRADCOM-TR-81-A-7
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 80
    facet.materialart.
    Unknown
    Historical overview of V/STOL aircraft technology (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The requirements for satisfactory characteristics in several key technology areas are discussed and a review is made of various V/STOL aircraft for the purpose of assessing the success or failure of each design in meeting design requirements. Special operating techniques were developed to help circumvent deficiencies. For the most part performance and handling qualities limitations restricted operational evaluations. Flight operations emphasized the need for good STOL performance, good handling qualities, and stability and control augmentation. The majority of aircraft suffered adverse ground effects.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TM-81280 , A-8511
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 81
    facet.materialart.
    Unknown
    Compensating linkage for main rotor control (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A compensating linkage for the rotor control system on rotary wing aircraft is described. The main rotor and transmission are isolated from the airframe structure by clastic suspension. The compensating linkage prevents unwanted signal inputs to the rotor control system caused by relative motion of the airframe structure and the main rotor and transmission.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 82
    facet.materialart.
    Unknown
    Computer code for charge-exchange plasma propagation (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-06-28
    Description: The propagation of the charge-exchange plasma from an electrostatic ion thruster is crucial in determining the interaction of that plasma with the associated spacecraft. A model that describes this plasma and its propagation is described, together with a computer code based on this model. The structure and calling sequence of the code, named PLASIM, is described. An explanation of the program's input and output is included, together with samples of both. The code is written in ASNI Standard FORTRAN.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 73-145
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 83
    facet.materialart.
    Unknown
    Charge-exchange plasma environment for an ion drive spacecraft (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-06-28
    Description: A model was reviewed which describes the propagation of the mercury charge-exchange plasma and extended to describe the flow of the molybdenum component of the charge-exchange plasma. The uncertainties in the models for various conditions are discussed. Such topics as current drain to the solar array, charge-exchange plasma material deposition, and the effects of space plasma on the charge-exchange plasma propagation are addressed.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: JPL-PUB-79-90 , Exptl. and Anal. Evaluation of Ion Thruster(Spacecraft Interactions; p 29-66
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 84
    facet.materialart.
    Unknown
    Experimental and analytical evaluation of ion thruster/spacecraft interactions (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Studies were conducted to both identify the environment produced by ion thrusters and to assess the interaction of this environment on a typical spacecraft and typical science instruments. Spacecraft charging and the charge exchange that accompanies it is discussed in detail. Electromagnetic interference was characterized for ion engines. The electromagnetic compatibility of ion thrusters with spacecraft instruments was determined. The effects of ion thruster plumes on spacecraft were studied with particular emphasis on external surface currents.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-163975 , JPL-PUB-80-92
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 85
    facet.materialart.
    Unknown
    The DAST-1 remotely piloted research vehicle development and initial flight testing (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The development and initial flight testing of the DAST (drones for aerodynamic and structural testing) remotely piloted research vehicle, fitted with the first aeroelastic research wing ARW-I are presented. The ARW-I is a swept supercritical wing, designed to exhibit flutter within the vehicle's flight envelope. An active flutter suppression system (FSS) designed to increase the ARW-I flutter boundary speed by 20 percent is described. The development of the FSS was based on prediction techniques of structural and unsteady aerodynamic characteristics. A description of the supporting ground facilities and aircraft systems involved in the remotely piloted research vehicle (RPRV) flight test technique is given. The design, specification, and testing of the remotely augmented vehicle system are presented. A summary of the preflight and flight test procedures associated with the RPRV operation is given. An evaluation of the blue streak test flight and the first and second ARW-I test flights is presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-163105
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 86
    facet.materialart.
    Unknown
    Experimental modal analysis of the fuselage panels of an Aero Commander aircraft (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The reduction of interior noise in light aircraft was investigated with emphasis the thin fuselage sidewall. The approach used is theoretical and involves modeling of the sidewall panels and stiffeners. Experimental data obtained from tests investigating the effects of mass and stiffness treatments to the sidewalls are presented. The dynamic characteristics of treated panels are contrasted with the untreated sidewall panels using experimental modal analysis techniques. The results include the natural frequencies, modal dampling, and mode shapes of selected panels. Frequency response functions, data relating to the global fuselage response, and acoustic response are also presented.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-165750 , REPT-10568
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 87
    facet.materialart.
    Unknown
    Ion extraction from a plasma (1981)
    In:  Other Sources
    Details
    Publication Date: 2019-06-28
    Description: The physical processes governing ion extraction from a plasma have been examined experimentally. The screen hole plasma sheath (the transition region wherein significant ion acceleration and complete electron retardation occurs) has been defined by equipotential plots for a variety of ion accelerator system geometries and operating conditions. It was found that the screen hole plasma sheath extends over a large distance, and influences ion and electron trajectories at least 15 Debye lengths within the discharge chamber. The electron density variation within the screen hole plasma sheath satisfied a Maxwell-Boltzmann density distribution at an effective electron temperature dependent on the discharge plasma primary-to-Maxwellian electron density ratio. Plasma ion flow up to and through the sheath was predominantly one-dimensional, and the ions entered the sheath region with a modified Bohm velocity. Low values of the screen grid thickness to screen hole diameter ratio were found to give good ion focusing and high extracted ion currents because of the effect of screen webbing on ion focusing.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: Journal of Applied Physics; 52; Apr. 198
    Format: text
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 88
    facet.materialart.
    Unknown
    A programing system for research and applications in structural optimization (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The flexibility necessary for such diverse utilizations is achieved by combining, in a modular manner, a state-of-the-art optimization program, a production level structural analysis program, and user supplied and problem dependent interface programs. Standard utility capabilities in modern computer operating systems are used to integrate these programs. This approach results in flexibility of the optimization procedure organization and versatility in the formulation of constraints and design variables. Features shown in numerical examples include: variability of structural layout and overall shape geometry, static strength and stiffness constraints, local buckling failure, and vibration constraints.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TM-83191
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 89
    facet.materialart.
    Unknown
    Characterization, parameter estimation, and aircraft response statistics of atmospheric turbulence (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A nonGaussian three component model of atmospheric turbulence is postulated that accounts for readily observable features of turbulence velocity records, their autocorrelation functions, and their spectra. Methods for computing probability density functions and mean exceedance rates of a generic aircraft response variable are developed using nonGaussian turbulence characterizations readily extracted from velocity recordings. A maximum likelihood method is developed for optimal estimation of the integral scale and intensity of records possessing von Karman transverse of longitudinal spectra. Formulas for the variances of such parameter estimates are developed. The maximum likelihood and least-square approaches are combined to yield a method for estimating the autocorrelation function parameters of a two component model for turbulence.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-3463 , BBN-4319
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 90
    facet.materialart.
    Unknown
    A full-scale wind tunnel investigation of a helicopter bearingless main rotor (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A helicopter bearingless main rotor was tested. Areas of investigation included aeroelastic stability, aerodynamic performance, and rotor loads as a function of collective pitch setting, RPM, airspeed and shaft angle. The rotor/support system was tested with the wind tunnel balance dampers installed and, subsequently, removed. Modifications to the rotor hub were tested. These included a reduction in the rotor control system stiffness and increased flexbeam structural damping. The primary objective of the test was to determine aeroelastic stability of the fundamental flexbeam/blade chordwise bending mode. The rotor was stable for all conditions. Damping of the rotor chordwise bending mode increases with increased collective pitch angle at constant operating conditions. No significant decrease in rotor damping occured due to frequency coalescence between the blade chordwise fundamental bending mode and the support system.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TM-81321 , A-8696
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 91
    facet.materialart.
    Unknown
    Vehicle concepts and technology requirements for buoyant heavy-lift systems (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: Several buoyant-vehicle (airship) concepts proposed for short hauls of heavy payloads are described. Numerous studies identified operating cost and payload capacity advantages relative to existing or proposed heavy-lift helicopters for such vehicles. Applications involving payloads of from 15 tons up to 800 tons were identified. The buoyant quad-rotor concept is discussed in detail, including the history of its development, current estimates of performance and economics, currently perceived technology requirements, and recent research and technology development. It is concluded that the buoyant quad-rotor, and possibly other buoyant vehicle concepts, has the potential of satisfying the market for very heavy vertical lift but that additional research and technology development are necessary. Because of uncertainties in analytical prediction methods and small-scale experimental measurements, there is a strong need for large or full-scale experiments in ground test facilities and, ultimately, with a flight research vehicle.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TP-1921 , A-8022
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 92
    facet.materialart.
    Unknown
    Design and analysis of a fuel-efficient single-engine, turboprop-powered, business airplane (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The speed, range, payload, and fuel efficiency of a general aviation airplane powered by one turboprop engine was determined and compared to a twin engine turboprop aircraft. An airplane configuration was developed which can carry six people for a noreserve range of 2,408 km at a cruise speed above 154 m/s, and a cruise altitude of about 9,144 m. The cruise speed is comparable to that of the fastest of the current twin turboprop powered airplanes. It is found that the airplane has a cruise specific range greater than all twin turboprop engine airplanes flying in its speed range and most twin piston engine airplanes flying at considerably slower cruise airspeeds.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-CR-165768
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 93
    facet.materialart.
    Unknown
    A case history of technology transfer (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: A sequence of events, occurring over the last 25 years, are described that chronicle the evolution of ion-bombardment electric propulsion technology. Emphasis is placed on the latter phases of this evolution, where special efforts were made to pave the way toward the use of this technology in operational space flight systems. These efforts consisted of a planned program to focus the technology toward its end applications and an organized process that was followed to transfer the technology from the research-technology NASA Center to the user-development NASA Center and its industry team. Major milestones in this evolution, which are described, include the development of thruster technology across a large size range, the successful completion of two space electric rocket tests, SERT I and SERT II, development of power-processing technology for electric propulsion, completion of a program to make the technology ready for flight system development, and finally the technology transfer events.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-TM-82618 , E-870
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 94
    facet.materialart.
    Unknown
    Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study, volume 2 (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The engine requirements are emphasized and include: high specific impulse within a restricted installed length constraint, long life, multiple starts, different thrust levels, and man-rated reliability. The engine operating characteristics and the major component analytical design are summarized.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-161832 , FR-14615-VOL-2
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 95
    facet.materialart.
    Unknown
    Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study. Volume 3: Engine data summary (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The engine operating characteristics were examined. Inlet pressure effects, tank pressurization effects, steady-state specific impulse, and the steady-state cycle were studied. The propellant flow schematic and operating sequence are presented. Engine hardware drawings are included.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-161833 , FR-14615-VOL-3
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 96
    facet.materialart.
    Unknown
    Orbit Transfer Vehicle (OTV) advanced expander cycle engine point design study. Volume 1: Executive summary (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The objective of the study was to generate the system design of a performance-optimized, advanced LOX/hydrogen expander cycle space engine. The engine requirements are summarized, and the development and operational experience with the expander cycle RL10 engine were reviewed. The engine development program is outlined.
    Keywords: SPACECRAFT PROPULSION AND POWER
    Type: NASA-CR-161831 , FR-14615-VOL-1
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 97
    facet.materialart.
    Unknown
    Behavior of aircraft antiskid braking systems on dry and wet runway surfaces: Hydromechanically controlled system (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The investigation utilized one main gear wheel, brake, and tire assembly of a McDonnell Douglas DC-9 series 10 airplane. The landing-gear strut was replaced by a dynamometer. During maximum braking, average braking behavior indexes based upon brake pressure, brake torque, and drag-force friction coefficient developed by the antiskid system were generally higher on dry surfaces than on wet surfaces. The three braking behavior indexes gave similar results but should not be used interchangeably as a measure of the braking of this antiskid sytem. During the transition from a dry to a flooded surface under heavy braking, the wheel entered into a deep skid but the antiskid system reacted quickly by reducing brake pressure and performed normally during the remainder of the run on the flooded surface. The brake-pressure recovery following transition from a flooded to a dry surface was shown to be a function of the antiskid modulating orifice.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TP-1877 , L-14549
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 98
    facet.materialart.
    Unknown
    Comparison of three thrust calculation methods using in-flight thrust data (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The gross thrust of an experimental airplane was determined by each method using the same flight maneuvers and generally the same data parameters. Coefficients determined from thrust stand calibrations for each of the three methods were then extrapolated to cruise flight conditions. The values of total aircraft gross thrust calculated by the three methods for cruise flight conditions agreed within + or - 3 percent. The disagreement in the values of thrust calculated by the different techniques manifested itself as a bias in the data. There was little scatter (0.5 percent) for the thrust levels examined in flight.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TM-81360 , H-1141
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 99
    facet.materialart.
    Unknown
    The use of interpractive graphic displays for interpretation of surface design parameters (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: An interactive computer graphics technique known as the Graphic Display Data method has been developed to provide a convenient means for rapidly interpreting large amounts of surface design data. The display technique should prove valuable in such disciplines as aerodynamic analysis, structural analysis, and experimental data analysis. To demonstrate the system's features, an example is presented of the Graphic Data Display method used as an interpretive tool for radiation equilibrium temperature distributions over the surface of an aerodynamic vehicle. Color graphic displays were also examined as a logical extension of the technique to improve its clarity and to allow the presentation of greater detail in a single display.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TM-81963 , L-14112
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
  • 100
    facet.materialart.
    Unknown
    US and USSR Military Aircraft and Missile Aerodynamics 1970-1980. A selected, annotated bibliography, volume 1 (1981)
    In:  CASI
    Details
    Publication Date: 2019-06-28
    Description: The purpose of this selected bibliography (281 citations) is to list available, unclassified, unlimited publications which provide aerodynamic data on major aircraft and missiles currently used by the military forces of the United States of America and the Union of Soviet Socialist Republics. Technical disciplines surveyed include aerodynamic performance, static and dynamic stability, stall-spin, flutter, buffet, inlets nozzles, flap performance, and flying qualities. Concentration is on specific aircraft including fighters, bombers, helicopters, missiles, and some work on transports, which are or could be used for military purposes. The bibliography is limited to material published from 1970 to 1980. The publications herein illustrate many of the types of aerodynamic data obtained in the course of aircraft development programs and may therefore provide some guidance in identifying problems to be expected in the conduct of such work. As such, this information may be useful in planning future research programs.
    Keywords: AIRCRAFT DESIGN, TESTING AND PERFORMANCE
    Type: NASA-TM-81951 , L-14392
    Format: application/pdf
    Location Call Number Expected Availability
    BibTip Others were also interested in ...
    NASA TECHNICAL REPORTS
Close ⊗
This website uses cookies and the analysis tool Matomo. More information can be found here...