ALBERT — All Library Books, journals and Electronic Records Telegrafenberg

1

Digitale Medien

Water Transport in Soils (1980)

Parlange, J Y

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 77-102

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.000453

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

2

Digitale Medien

Transonic Flow Past Oscillating Airfoils (1980)

Tijdeman, H ; Seebass, R

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 181-222

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.001145

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

3

Digitale Medien

Scientific Progress on Fire (1980)

Emmons, H W

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 223-236

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.001255

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

4

Digitale Medien

Toward a Statistical Theory of Suspension (1980)

Herczynski, R ; Pienkowska, I

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 237-269

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.001321

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

5

Digitale Medien

Coastal Circulation and Wind-Induced Currents (1980)

Winant, C D

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 271-301

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.001415

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

6

Digitale Medien

Models of Wind-Driven Currents on the Continental Shelf (1980)

Allen, J S

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 389-433

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.002133

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

7

Digitale Medien

Stokeslets and Eddies in Creeping Flow (1980)

Hasimoto, H ; Sano, O

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 335-363

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.002003

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

8

Digitale Medien

Continuous Drawing of Liquids to Form Fibers (1980)

Denn, M M

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 365-387

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.002053

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

9

Digitale Medien

Particle Motions in a Viscous Fluid (1980)

Leal, L G

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 435-476

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.002251

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

10

Digitale Medien

Topographically Trapped Waves (1980)

Mysak, L A

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 45-76

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.000401

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

11

Digitale Medien

Fluid Mechanics of the Duodenum (1980)

Macagno, E O ; Christensen, J

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 139-158

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.001035

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

12

Digitale Medien

Instabilities of Waves on Deep Water (1980)

Yuen, H C ; Lake, B M

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 303-334

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.001511

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

13

Digitale Medien

Somes Notes on the Relation between Fluid Mechanics and Statistical Physics (1980)

Uhlenbeck, G E

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 1-10

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.000245

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

14

Digitale Medien

Solitary Waves (1980)

Miles, J W

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 11-43

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.000303

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

15

Digitale Medien

Analysis of Two-Dimensional Interactions Between Shock Waves and Boundary Layers (1980)

Adamson, T C ; Messiter, A F

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 103-138

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.000535

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

16

Digitale Medien

Dynamic Materials Testing: Biological and Clinical Applications in Network-Forming Systems (1980)

McIntire, L V

Palo Alto, Calif. : Annual Reviews

Annual Review of Fluid Mechanics 12 (1980), S. 159-180

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0066-4189

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau , Physik

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.fl.12.010180.001111

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

17

Digitale Medien

Unity of Concepts in the Structure of Matter (1980)

Bardeen, J

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 1-19

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.000245

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

18

Digitale Medien

Cold Forming of Polymeric Materials (1980)

Shaw, M T

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 19-42

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.000315

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

19

Digitale Medien

Electrical and Optical Properties of Hydrogenated Amorphous Silicon (1980)

Pankove, J I ; Carlson, D E

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 43-63

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.000355

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

20

Digitale Medien

The Metal-Semiconductor Interface (1980)

McCaldin, J O ; McGill, T C

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 65-83

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.000433

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

21

Digitale Medien

Superconducting Materials (1980)

Scanlan, R M

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 113-132

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.000553

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

22

Digitale Medien

Electrocrystallization (1980)

Budevski, E ; Bostanov, V ; Staikov, G

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 85-112

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.000505

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

23

Digitale Medien

Energy Levels in Silicon (1980)

Chen, J W ; Milnes, A G

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 157-228

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.001105

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

24

Digitale Medien

Liquid Crystals (1980)

Chandrasekhar, S ; Madhusudana, N V

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 133-155

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.001025

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

25

Digitale Medien

Mechanical Properties of Composites (1980)

Chou, T ; Kelly, A

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 229-259

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.001305

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

26

Digitale Medien

Small Angle Neutron Scattering of Polymers (1980)

Ullman, R

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 261-285

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.001401

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

27

Digitale Medien

Materials for Heterojunction Devices (1980)

Kressel, H

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 287-309

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.001443

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

28

Digitale Medien

High Modulus/High Strength Organic Fibers (1980)

Black, W B

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 311-362

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.001523

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

29

Digitale Medien

Positron Annihilation Spectroscopy (1980)

Siegel, R W

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 393-425

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.002141

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

30

Digitale Medien

Preparation of Glassy Metals (1980)

Chen, H S ; Leamy, H J ; Miller, C E

Palo Alto, Calif. : Annual Reviews

Annual Review of Materials Research 10 (1980), S. 363-391

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 0084-6600

Quelle: Annual Reviews Electronic Back Volume Collection 1932-2001ff

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1146/annurev.ms.10.080180.002051

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

31

Digitale Medien

THE INFLUENCE OF TEST TEMPERATURE ON IMPACT FATIGUE CRACK GROWTH BEHAVIOR IN QUENCHED AND TEMPERED Cr-Mo ALLOY STEELS WITH DIFFERENT PRIOR AUSTENITE GRAIN SIZES (1980)

MURAKAMI, R. ; AKIZONO, K.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Impact fatigue tests were carried out using a rotating-disk type impact fatigue testing machine. The influence of prior austenite grain size, ductile-brittle transition temperature and test temperature on impact fatigue crack growth rate was investigated by means of fracture mechanics and fractography in quenched and tempered Cr-Mo alloy steel in which the prior austenite grain size was varied from 8–3 to 25-4 μm. The results in impact fatigue tests were compared to those under non-impact conditions. The crack growth rates associated with striation formation were insensitive to the change in prior austenite grain size, ductile-brittle transition temperature and test temperature regardless of impact and non-impact fatigue. When the material was in the brittle condition, impact fatigue gave rise to a transition from striation formation to intergranular and cleavage cracking. Such a transition will result in the acceleration of crack growth rate. The Paris Law exponent values in impact fatigue were reasonably expressed by the ratio of test temperature to ductile-brittle transition temperature.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01384.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

32

Digitale Medien

AN IMPROVED A.C. POTENTIAL DROP METHOD FOR DETECTING SURFACE MICROCRACKS DURING FATIGUE TESTS OF UNNOTCHED SPECIMENS (1980)

VERPOEST, I. ; AERNOUDT, E. ; DERUYTTERE, A. ; [weitere]

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—The detection and measurement of surface microcracks in unnotched specimens are becoming more important, both from the point of view of description of crack growth by linear elastic fracture mechanics and from the classical endurance limit approach. Theoretical analyses of the current distribution in a cylindrical test specimen show promise that the a.c. potential drop method will become more sensitive for surface microcracks when higher current frequencies are applied. This effect was experimentally affirmed during fatigue tests on unnotched cylindrical specimens. With a 40 kHz current frequency semicircular surface microcracks with an area of 0.0066 mm2 (0.05% of the specimen cross-section) were detected. For accurate and reproducible crack growth measurements, a 5 kHz current frequency is preferable.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01360.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

33

Digitale Medien

FRACTOGRAPHIC INVESTIGATION OF FRETTING-WEAR AND FRETTING-FATIGUE IN ALUMINIUM ALLOYS (1980)

LEADBEATER, G. ; KOVALEVSKII, V. V. ; NOBLE, B. ; [weitere]

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—A fully age hardened Al-4%Cu-1%Mg alloy has been subjected to plain-fatigue and fretting-fatigue and the resulting fracture surfaces compared. Crack initiation in the plain-fatigue sample occurred at cracked inter-metallic inclusions and subsequent crack growth was at 90° to the surface. Crack initiation in the fretting-fatigue sample occurred at the edge of wear scar and subsequent crack growth was at 45° to the surface. Measurement of fatigue striation spacing on the fracture surfaces showed that, for the same applied stress, the initial crack propagation rate was an order of magnitude higher in the fretting-fatigue sample. This accelerated crack propagation rate was maintained until the crack reached a depth of 0.5–1.0 mm; thereafter the growth rate was the same as that in the plain-fatigue sample.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01363.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

34

Digitale Medien

FATIGUE CRACK CLOSURE AND RESIDUAL DISPLACEMENT MEASUREMENTS ON ALUMINUM ALLOYS (1980)

MAHULIKAR, DEEPAK S. ; MARCUS, H. L.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—Ultrasonic bulk measurement technique was used to measure crack closure and a clip-on gage surface measurement technique was used to measure residual displacement at the crack tip of a propagating fatigue crack in 2219 and 7075 aluminum alloys. Experiments were carried out in vacuum, humid air, dry O2 gas, N2 gas, and deuteriated water vapor environments to evaluate effects of environments on residual strain and crack closure loads. It was observed that the closure load detected by ultrasonics decreased with introduction of humidity while the residual strain parameter dincreased with the humidity. The results are modeled as a build-up of oxide layer in addition to strengthening of asperities on the fracture surface. In the light of these observations, the effectiveness of surface and bulk measurements is evaluated. The results demonstrate that surface measurements are not always representative of the bulk behavior and use of such measurements in predictive analysis for fatigue can be misleading.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01365.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

35

Digitale Medien

A QUANTITATIVE METALLOGRAPHIC ASSESSMENT OF STRUCTURAL DEGRADATION OF TYPE 316 STAINLESS STEEL DURING CREEP-FATIGUE (1980)

HALES, ROYDEN

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Optical and scanning electron microscopy have revealed the existence of grain boundary cavities in a series of specimens which had been cyclically deformed in the strain range ±0.25% with hold times ranging from 0 to 1000 min. The way in which these defects increase in size and number has been measured and found to correlate with the creep strain accumulated during the hold periods.A further observation is that a critical amount of deformation is required before either fatigue or creep type damage is nucleated. These observations lead to an alternative method to the currently accepted linear damage summation rule for estimating a lower bound of the creep-fatigue endurance.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01383.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

36

Digitale Medien

INCOMPLETE SELF-SIMILARITY OF FATIGUE IN THE LINEAR RANGE OF CRACK GROWTH (1980)

BARENBLATT, G. I. ; BOTVINA, L. R.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—The application of dimensional analysis and similarity methods to the study of the speed of fatigue crack growth is considered. It is shown that the Paris range of the crack propagation diagram is an intermediate-asymptotic stage of the crack growth process. Over this stage the influence of the initial conditions on the process of fatigue crack growth has disappeared but the influence of the instability has not yet intruded. So-called incomplete self-similarity prevails at this stage with respect to a basic similarity parameter, equal to the ratio of the stress intensity factor amplitude to the fracture toughness. It is shown that for a certain material under fixed external loading conditions the exponent in the Paris power law is a universal function of the ratio of specimen thickness to the ultimate size of the cyclic plastic zone. Processing of available experimental data confirmed the results obtained by this approach.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01359.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

37

Digitale Medien

TONGUE-SHAPED CRACK EXTENSION DURING FATIGUE OF HIGH STRENGTH ALUMINIUM ALLOYS (1980)

VLASVELD, J. A. ; SCHIJVE, J.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Fracture surfaces of both service and laboratory fatigue fractures frequently show dark tongue-shaped marks. In fatigue tests on 7075–T6 specimens such tongues were produced by high peak loads. Measurements indicated that a tongue is not formed during a single burst of crack extension but is the result of a number of successive pop-ins requiring an increasing load. Therefore tongue formation is a quasi-stable phenomenon. The tunnelling fracture in the centre of plate thickness is accompanied by unfailed ligaments at the plate surfaces which reduce the stress intensity at the crack tip. The effect of different material conditions and loading direction on tongue forming was studied. A new model was developed to describe the growth of a tongue. The model was in good agreement with the various test results. The analysis of the problem has some relevance to validity requirements for K1c. A formula pertaining to tongues proposed by Forsyth was slightly modified and found to be approximately correct for the present results.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01109.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

38

Digitale Medien

A SIMPLE THEORY FOR LOW CYCLE MULTIAXIAL FATIGUE (1980)

LOHR, R.D. ; ELLISON, E. G.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— A theoretical development based on a simple physical model is proposed to help the designer predict high strain multi-axial fatigue behaviour. This approach hypothesises that the maximum shear strain γ*, on planes driving the crack through the thickness, controls the fatigue crack propagation rate and hence the life. The direct strain δ*n acting normal to the plane of γ* can exert a secondary modifying influence. Experimental results from several research laboratories have been analysed in this manner with some success.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01101.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

39

Digitale Medien

SOME CREEP/FATIGUE PROPERTIES OF TYPE 316 STEEL AT 625°C (1980)

WOOD, D. S. ; WYNN, J. ; BALDWIN, A. B. ; [weitere]

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Strain controlled continuous cycling fatigue tests are reported on three casts of Type 316 steel; the results obtained are shown to be consistent with published data.Strain controlled creep/fatigue tests are reported involving a hold period per cycle of between 0·2 and 168 h on one batch of Type 316 steel. An empirical extrapolation of the data and one involving a linear damage summation suggest that the existing Code Case N47 creep/fatigue design curve and rules are over-conservative. A stress relaxation/fatigue endurance correlation shows some promise for predictive purposes. Although many of the mechanical test and metallurgical features observed are consistent with a fundamental crack growth extrapolation approach, further consideration of detailed aspects are necessary before it can be used with confidence. It is concluded that there are no entirely reliable methods of extrapolation currently available for Type 316 steel and longer term tests are therefore essential to reduce the extrapolation uncertainties.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01103.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

40

Digitale Medien

ENVIRONMENTAL EFFECTS ON FATIGUE FRACTURE MODE TRANSITIONS OBSERVED IN ALUMINIUM ALLOYS (1980)

VOGELESANG, L. B. ; SCHIJVE, J.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Fatigue crack propagation tests were carried out in different environments on 7075–T6 and 2024–T3 centre-cracked sheet specimens. Observations were made on the macroscopic transition from tensile mode to shear mode. The transition is suppressed by an aggressive environment, whereas it is promoted by an inert environment. As a consequence there is no unique correlation between the state of stress and the mode of cracking. Both the state of stress and the environment have a significant effect on the mode of cracking. A simple model for the effect of environment on fatigue crack growth is presented. The implications for crack growth under corrosion fatigue conditions are discussed.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01106.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

41

Digitale Medien

INCORPORATING THRESHOLD AND ENVIRONMENTAL EFFECTS INTO THE DAMAGE ACCUMULATION MODEL FOR FATIGUE CRACK GROWTH (1980)

DAVIDSON, DAVID L.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—Measurement of the energy expended during growth of a fatigue crack in the near threshold region and how it is affected by a water vapor environment is coupled with direct observation of the crack tip to produce a modification of the damage accumulation model for fatigue crack growth which incorporates threshold and environmental effects.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01362.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

42

Digitale Medien

ION IMPLANTATION EFFECTS ON FATIGUE AND SURFACE HARDNESS (1980)

KAO, PO-WE ; BYRNE, J. G.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01367.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

43

Digitale Medien

ERRATUM (1980)

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01370.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

44

Digitale Medien

ESTIMATION OF THE FATIGUE LIMIT BY PROGRESSIVELY-INCREASING LOAD TESTS (1980)

DENGEL, D. ; HARIG, H.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— On the basis of fatigue data derived from a large number of experiments, the load progression methods of Locati and Prot as well as a method operating on a thermometric basis have been comparatively evaluated in an experimental and analytical (statistical) study. The last-named thermo-method can provide useful estimates for a fatigue limit corresponding with ca. 0 to 5% probability of fracture with only 1 to 3 experiments.The Prot-method, set up and evaluated in a certain way, provides a useful estimate of the fatigue limit and, additionally, an approximate indication of the width of the transition range of the corresponding Wöhler-type tests after experiments on not less than about ten specimens.The load progression, contrary to the original Prot-concept, must not necessarily be applied in a continuous mode, but can occur stepwise with increments Δσ smaller than ca. 15 Nm-2.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01108.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

45

Digitale Medien

EFFECT OF TEMPERATURE ON THE FATIGUE-CRACK PROPAGATION BEHAVIOUR OF INCONEL X-750 (1980)

MILLS, WILLIAM J. ; JAMES, LEE A.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Linear-elastic fracture mechanics techniques were used to characterize the effect of temperature on the fatigue-crack propagation behaviour of precipitation heat-treated. Inconel X-750 in an air environment over the temperature range 24 to 649°C. In general, crack growth rates were found to increase with increasing temperature, particularly at the highest test temperature (649°C). The effect of stress ratio on the fatigue-crack growth behaviour of Inconel X-750 was examined at 538°C, and results indicated that the elevated temperature fatigue response of this nickel-base superalloy was relatively insensitive to stress ratio level at the growth rate levels studied. Metallographic and electron fractographic examination of Inconel X-750 fatigue fracture surfaces revealed operative crack growth mechanisms to be a function of temperature and prevailing stress intensity factor. Under room temperature and intermediate temperature conditions (up to 538°C), all fatigue fracture surfaces exhibited a faceted crystallographic morphology at low crack growth rates followed by striations in the higher growth rate regime. At the highest test temperature (649°C), the fatigue crack was found to propagate by an intergranular mechanism.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01111.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

46

Digitale Medien

A CALCULATION OF THE THRESHOLD STRESS INTENSITY RANGE FOR FATIGUE CRACK PROPAGATION IN METALS (1980)

CHONGHUA, YU ; MINGGAO, YAN

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— In this paper the strain distribution and the plastic zone size at a fatigue crack tip are discussed. From this analysis and considering the critical condition for plastic-blunting, a simple analytical formula for calculating the threshold stress intensity range for fatigue crack propagation at R= 0 is proposed. It is found that calculated values are in good agreement with existing experimental results.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01113.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

47

Digitale Medien

COMPARISON OF PLASTIC WORK OF FATIGUE CRACK PROPAGATION IN LOW CARBON STEEL MEASURED BY STRAIN-GAGES AND ELECTRON CHANNELING (1980)

LIAW, P. K. ; FINE, M. E. ; DAVIDSON, D. L.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— The plastic work to propagate a fatigue crack by a unit area, U, measured by the foil strain gage technique requires an extrapolation to estimate the contribution closer than 100 μm to the crack tip. This is due to the size of the strain-gages used, 200 × 210 μm. Conversely, the electron channeling technique for determining U is useful mainly close to the crack tip where subgrains form. In the present work U was measured by both techniques in the same low carbon steel at ΔK= 8 MN/m3/2. The contribution to U from closer than 100 μm of the crack tip was determined to be 1·7 × 106 J/m2 using electron channeling and 2·0 × 106 J/m2 by extrapolation. The measured contribution to U from further than 100 μm from the crack tip was 3·6 × 106 J/m2 giving 5·3 × 106 J/m2 for U. Thus, a large amount of energy is absorbed outside the region where sub-grains form. The non-hysteretic plastic work was found to be about four orders of magnitude smaller than the hysteretic plastic work, and may be neglected. A map of the plastic zone results from the strain-gage measurement. Rice's theory predicts the measured plastic zone sizeif the proper material's strength is employed in the formula.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01104.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

48

Digitale Medien

LOW-CYCLE FATIGUE AND CYCLIC CREEP OF METALS (1980)

PISARENKO, G. S. ; TROSHCHENKO, V. T. ; STRIZHALO, V. A. ; [weitere]

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— This paper deals with the effect of accumulated (oriented) plastic deformation (cyclic creep) on the life of metals under conditions of cyclic loading typically in the range of low-cycle fatigue. Specific features of cyclic creep of aluminium, titanium alloys and structural steels were investigated for the lives ranging from 05 to 2 × 105 cycles to rupture as well as specific features of transition from quasistatic to fatigue fracture associated with the variation in the mode of deformation of metals. It is shown that under conditions of repeated stress-controlled loading in a wide range of low temperatures, the cyclic creep processes are the predominant ones determining life of metals over a wide range of cycles, and when calculating life under these conditions it is necessary to take into account the rate of these processes irrespective of the type of fracture: quasistatic or fatigue. An equation was obtained for calculating life under low-cycle loading conditions which takes into account the interrelationship between the life, the accumulated plastic strain, steady-state cyclic creep rate and the resistance of the material to cyclic creep.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01380.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

49

Digitale Medien

STRESS GRADIENTS AROUND NOTCHES (1980)

SCHIJVE, JAAP

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Stress gradients at the root of a notch are significant for the notch effect and the size effect of fatigue properties. Usually the gradient of the stress distribution in the minimum section is considered. In the present paper the variation of the tensile stress along the edge of the notch is considered. Calculations are made for a variety of notches. The results indicate a remarkable conformity of stress distributions at the notch root if the same peak stress and notch root radius (ρ) apply. Consequently K1and ρare highly characteristic for the stress distribution around the notch. Along the edge of the notch the stress decreases at a much slower rate than in the minimum section going away from the material surface. For the stress along the edge of the notch a stress gradient coefficient is defined. The variation of this coefficient is fairly small for several notches and K1, values. A 5% lower stress as compared to the peak stress at the notch root is obtained at about 0.02 ρbelow the material surface and at a distance of about 0.18 ρalong the material surface.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01382.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

50

Digitale Medien

FATIGUE MACROCRACK GROWTH IN TEMPERED HY80, HY130, AND 4140 STEELS:THRESHOLD AND MID-ΔK RANGE (1980)

KWUN, S. I. ; FINE, M. E.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— –The rate of propagation of macrofatigue cracks down to near threshold was measured in air in three tempered martensitic steels; HY80, HY130 and 4140 (650°C temper). The value of ΔKth was determined by the load-shedding technique in center notched panel specimens. Of the three steels, 4140 tempered at 650°C had the lowest ΔKth, 3–5 MN/m3/2, while HY80 had the highest, 4.2 MN/m3/2. The 4140 (650°C temper) is intermediate in strength between HY80 and HY130. The results are discussed in terms of a recent theory of one of the authors.The fatigue crack propagation rates in the mid-ΔKrange in HY80 and HY130 in argon were also studied by measuring, with foil strain gages, the cyclic plastic work to propagate a fatigue crack by a unit area, U.HY80 has a lower crack propagation rate and correspondingly higher U.This was attributed in part to the higher yield strength of HY130 but the dislocation structure and carbide composition and morphology also play roles. Microstructural changes due to cyclic plastic deformation inside the plastic zone in HY80 and HY130 were observed by TEM of thin foils. SEM studies of the fracture surfaces at ΔK= 20 MN/m3/2 indicate a more ductile fracture mode for HY80 than for HY130. The fatigue crack propagation rate of HY130 is substantially higher in laboratory air (47% relative humidity) than in dry argon. This is not the case for HY80.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01385.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

51

Digitale Medien

FATIGUE CRACK TIP PLASTIC STRAIN IN HIGH-STRENGTH ALUMINUM ALLOYS (1980)

DAVIDSON, D. L. ; LANKFORD, J.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Plastic zone size and shape and the distribution of strain within the plastic zone are determined for the high-strength aluminium alloys 2024-T4, 6061 T6, and 7075-T6 using the technique of selected area electron channeling. Plastic zone size is found to correlate with the work done in creating a unit of new crack surface and the yield stress, rather than with the stress intensity factor and yield stress. Plastic strain distribution is found to be a logarithmic function of distance from the crack tip, in agreement with the mathematical analysis for a moving crack in plane strain.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01379.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

52

Digitale Medien

FORMATION AND GROWTH OF FATIGUE CRACKS IN REINFORCING STEEL FOR CONCRETE (1980)

DIN, A. S. SALAH EL ; LOVEGROVE, J. M.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— –The da/dNvsΔKrelation for Torbar Steel is obtained by testing specimens cut from 32 mm bar. This relation is compared with available data for Unisteel 410 and with medium strength steels. Also, the pattern of fatigue cracking in Torbar is studied by inspecting bars retrieved from reinforced concrete beams which were subjected to repeated loading. It has been observed that fatigue crack locations in the bars coincided with the locations of concrete cracks traversing the bars. Tension tests on the fatigue cracked bars show that the cracks considerably reduce the ductility of the bars.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01381.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

53

Digitale Medien

A METHOD OF ESTIMATING BIAXIAL FATIGUE GROWTH RATES (1980)

HOWARD, I. C.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—Conventionally, fatigue growth rate data are correlated in terms of the range ΔKof the applied stress intensity factor. It is argued that a correlation involving both ΔKand the constant stress Tclose to the tip of the equivalent elastic crack should be adequate for moderate stress, biaxial fatigue data. Practical application of these ideas would involve the preparation of “T -term” compendia similar to those already available for K -calibrations. “T -term” data are presented for the case of an edge-cracked strip in tension.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01366.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

54

Digitale Medien

ANNOUNCEMENTS: EUROMECH COLLOQUIUM 147 “DAMAGE MECHANICS” (1980)

Lemaitre, Jean

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01369.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

55

Digitale Medien

FATIGUE THERESHOLD IN A 2618A ALUMINIUM ALLOY (1980)

ROBIN, C. ; PLUVINAGE, G.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— This work is concerned with the determination of the fatigue threshold ΔKth for an aluminium alloy. No dependency of ΔKth with grain size was observed. Crack closure concepts were applied in order to explain the effect of mean stress and environment. The opening load Pop was determined by the compliance method. Results show no significant variation of Pop with environment (air or vacuum) but partially explain the influence of mean stress on crack growth rates. Fractographic analysis (SEM) of fracture surfaces and evolution of compliance diagrams suggest that a change of mechanism in crack propagation occurs when stage I changes to stage II growth.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01110.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

56

Digitale Medien

HIGH STRAIN FATIGUE OF A TYPE 316 STAINLESS STEEL (1980)

PLUMBRIDGE, W. J. ; DALSKI, M. E. ; CASTLE, P. J.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— High strain fatigue tests of Type 316 stainless steel have been carried out at room temperature and 600°C. Cold work reduces the life relative to the annealed condition when considered in terms of plastic strain per cycle but not when the total strain range is used. It also renders the material far more resistant to cyclically induced changes in strength than the annealed state in which the strength is more than doubled at 600°C. Strain ageing causes further instability and enhances the hardening and loss of ductility in the annealed material. Because of the large number of variables involved, comparison with other work is unable to identify the parameters most influential in determining endurance. It is argued that where a fatigue–creep interaction occurs, then cyclic hardening will promote a higher creep resistance in a sequential interaction and favour a fatigue dominated failure in a simultaneous interaction.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01112.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

57

Digitale Medien

BIAXIAL HIGH STRAIN FATIGUE TESTING OF 1Cr-Mo-V STEEL (1980)

LOHR, R. D. ; ELLISON, E. G.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— A test facility has been developed in which a thin walled tube can be subjected to fully reversed fatigue cycles for all biaxial stress or strain ratios. Twin loop servo-control allied to high resolution gauge length extensometry, load and pressure transducers permits stress or strain controlled testing. The rig is unique in that cyclic stress-strain hysteresis loops can be obtained for both axial and circumferential directions during a test.Results from a strain controlled series of low cycle fatigue tests on a ferritic 1Cr-Mo-V steel obeyed the Manson-Coffin relationship with the exponent being sensibly constant for all strain ratios. For a given maximum principal biaxial strain, the damaging effect increased as the strain ratio φ increased from –1 to +1. By comparing results from solid and hollow cylindrical specimens, geometry effects on fatigue life were revealed. Data on shakedown and cyclic softening under biaxial strain conditions were also obtained.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01102.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

58

Digitale Medien

AN ANALYSIS OF LOW CYCLE FATIGUE BASED ON HYSTERESIS ENERGY (1980)

RADHAKRISHNAN, V. M.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— Cyclic deformation behaviour of medium carbon steel, armco iron and copper has been investigated. A model based on the energy absorbed for the fracture process at the crack tip, given in the form (Δw*p)y where Δw*p is the hysteresis energy at the crack front and the exponent y decides the energy spent for the fracture process, is proposed for the crack growth in low cycle fatigue. The value of the exponent y has been found to be around 0·26 to 0·28 for medium carbon steel and armco iron and around 0·52 for copper. These values of y give good prediction of the relations between the total fracture energy and the stress amplitude and the total fracture energy versus the fatigue life. The energy based approach has been extended to predict the cumulative damage in a single step stress variation. Good correlation has been obtained between the experimental data and the theoretical prediction.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01105.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

59

Digitale Medien

SOME OBSERVATIONS ON SMALL FATIGUE CRACKS IN A SUPERALLOY (1980)

SHELDON, G. P. ; COOK, T. S. ; JONES, J. W. ; [weitere]

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—An investigation into the applicability of linear elastic fracture mechanics to very small fatigue cracks growing in a powder metallurgy nickel base superalloy is described. An unusual specimen was designed to facilitate the study of these small cracks. The stress intensity factor for the specimen was estimated and then calculated from the plastic zone size as determined by interferometry. The crack tip deformation field was also observed in the SEM and by stereoscopic viewing. These observations showed that the macroscopic deformation field was the same for both the long and short cracks, and was controlled by the stress intensity. The fatigue crack tip was found to interact strongly with the material microstructure and the localgrowth rate cannot be correlated with fracture mechanics quantities.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01361.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

60

Digitale Medien

A MODEL FOR PREDICTING THE EFFECT OF FREQUENCY ON FATIGUE CRACK GROWTH BEHAVIOR AT ELEVATED TEMPERATURE (1980)

SAXENA, ASHOK

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract—An analytical model to represent and predict the influence of frequency on the elevated temperature fatigue crack growth behavior of structural alloys is described. This model was formulated by considering the time dependence of stress and strain rate in the crack tip region due to creep deformation.Fatigue crack growth rate data were generated on ASTM grade A470 class 8 (CrMoV) steel at 538°C (1000°F) for several frequencies to evaluate the model. Based on these results and data taken from the literature on 304 stainless steel, it was concluded that the proposed model is capable of accurately representing and predicting the effect of frequency over several orders of magnitude on the fatigue crack growth rates at elevated temperature.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01364.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

61

Digitale Medien

TECHNICAL NOTE: COMMENTS ON “THE THRESHOLD STRESS INTENSITY RANGE IN FATIGUE” (1980)

BAÏLON, J.-P. ; DICKSON, J. I. ; MASOUNAVE, J. ; [weitere]

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01368.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

62

Digitale Medien

AN ASSESSMENT OF CRACK CLOSURE IN FATIGUE USING THE WESTERGAARD STRESS FUNCTION (1980)

LAL, K. M. ; MAY, I.

Oxford, UK : Blackwell Publishing Ltd

Fatigue & fracture of engineering materials & structures 3 (1980), S. 0

zur Merkliste hinzufügen auf der Merkliste

Details

ISSN: 1460-2695

Quelle: Blackwell Publishing Journal Backfiles 1879-2005

Thema: Maschinenbau

Notizen: Abstract— The residual stress fields at the tip of a fatigue crack have been evaluated using the Westergaard stress function. Using these values the loads at which the crack tip begins to open have been calculated to give U, Elber's effective stress range factor, as a function of stress ratio R, the ratio of applied stress range to yield stress, Δσ/σy, and the cyclic strain hardening exponent n. The computed values of U are shown to be in good agreement with measured values, and the predicted effect of prior high load cycles on the crack propagation rate at a lower cyclic load, on taking crack closure effects into account, is in excellent agreement with experimental results.

Materialart: Digitale Medien

URL: http://dx.doi.org/10.1111/j.1460-2695.1980.tb01107.x

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

Artikel (Nationallizenzen)

Volltext

63

Unbekannt

Positron Annihilation Spectroscopy (1980)

Siegel, R W

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 393-425. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.002141.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

64

Unbekannt

Small Angle Neutron Scattering of Polymers (1980)

Ullman, R

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 261-285. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.001401.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

65

Unbekannt

Preparation of Glassy Metals (1980)

Chen, H S ; Leamy, H J ; Miller, C E

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 363-391. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.002051.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

66

Unbekannt

Liquid Crystals (1980)

Chandrasekhar, S ; Madhusudana, N V

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 133-155. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.001025.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

67

Unbekannt

Superconducting Materials (1980)

Scanlan, R M

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 113-132. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.000553.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

68

Unbekannt

The Metal-Semiconductor Interface (1980)

McCaldin, J O ; McGill, T C

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 65-83. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.000433.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

69

Unbekannt

Electrical and Optical Properties of Hydrogenated Amorphous Silicon (1980)

Pankove, J I ; Carlson, D E

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 43-63. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.000355.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

70

Unbekannt

Unity of Concepts in the Structure of Matter (1980)

Bardeen, John

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 1-19. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.000245.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

71

Unbekannt

Analysis of Two-Dimensional Interactions Between Shock Waves and Boundary Layers (1980)

Adamson, T C ; Messiter, A F

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 103-138. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.000535.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

72

Unbekannt

Instabilities of Waves on Deep Water (1980)

Yuen, H C ; Lake, B M

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 303-334. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.001511.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

73

Unbekannt

Models of Wind-Driven Currents on the Continental Shelf (1980)

Allen, J S

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 389-433. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.002133.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

74

Unbekannt

Coastal Circulation and Wind-Induced Currents (1980)

Winant, C D

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 271-301. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.001415.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

75

Unbekannt

Stokeslets and Eddies in Creeping Flow (1980)

Hasimoto, H ; Sano, O

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 335-363. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.002003.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

76

Unbekannt

Transonic Flow Past Oscillating Airfoils (1980)

Tijdeman, H ; Seebass, R

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 181-222. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.001145.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

77

Unbekannt

Scientific Progress on Fire (1980)

Emmons, H W

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 223-236. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.001255.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

78

Unbekannt

Somes Notes on the Relation between Fluid Mechanics and Statistical Physics (1980)

Uhlenbeck, G. E.

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 1-10. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.000245.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

79

Unbekannt

Toward a Statistical Theory of Suspension (1980)

Herczynski, R ; Pienkowska, I

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 237-269. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.001321.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

80

Unbekannt

Dynamic Materials Testing: Biological and Clinical Applications in Network-Forming Systems (1980)

McIntire, L V

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 159-180. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.001111.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

81

Unbekannt

Energy Levels in Silicon (1980)

Chen, J W ; Milnes, A G

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 157-228. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.001105.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

82

Unbekannt

Electrocrystallization (1980)

Budevski, E ; Bostanov, V ; Staikov, G

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 85-112. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.000505.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

83

Unbekannt

Materials for Heterojunction Devices (1980)

Kressel, H

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 287-309. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.001443.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

84

Unbekannt

Cold Forming of Polymeric Materials (1980)

Shaw, M T

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 19-42. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.000315.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

85

Unbekannt

Particle Motions in a Viscous Fluid (1980)

Leal, L G

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 435-476. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.002251.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

86

Unbekannt

Water Transport in Soils (1980)

Parlange, J Y

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 77-102. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.000453.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

87

Unbekannt

Fluid Mechanics of the Duodenum (1980)

Macagno, E O ; Christensen, J

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 139-158. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.001035.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

88

Unbekannt

Continuous Drawing of Liquids to Form Fibers (1980)

Denn, M M

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 365-387. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.002053.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

89

Unbekannt

Solitary Waves (1980)

Miles, J W

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 11-43. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.000303.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

90

Unbekannt

Preface (1980)

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): annurev.mr.10.072706.100001. Published 1980 Aug 01. doi: 10.1146/annurev.mr.10.072706.100001.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

91

Unbekannt

Mechanical Properties of Composites (1980)

Chou, T ; Kelly, A

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 229-259. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.001305.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

92

Unbekannt

High Modulus/High Strength Organic Fibers (1980)

Black, W B

Annual Reviews

In: Annual Review of Materials Science. 1980; 10(1): 311-362. Published 1980 Aug 01. doi: 10.1146/annurev.ms.10.080180.001523.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-08-01

Print ISSN: 0084-6600

Thema: Maschinenbau

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext

93

Unbekannt

Topographically Trapped Waves (1980)

Mysak, L A

Annual Reviews

In: Annual Review of Fluid Mechanics. 1980; 12(1): 45-76. Published 1980 Jan 01. doi: 10.1146/annurev.fl.12.010180.000401.

zur Merkliste hinzufügen auf der Merkliste

Details

Publikationsdatum: 1980-01-01

Print ISSN: 0066-4189

Digitale ISSN: 1545-4479

Thema: Maschinenbau , Physik

Publiziert von Annual Reviews

Permalink

	Standort	Signatur	Erwartet	Verfügbarkeit

Andere fanden auch interessant ...

AKTUELLE ARTIKEL

S·F·X

Volltext