ALBERT

Notes: Abstract Microprobe analyses of feldspars in granite mylonites containing flame perthite give compositions that invariably plot as three distinct clusters on a ternary feldspar diagram: orthoclase (Or92–97), albite and oligoclase-andesine. The albite occurs as grains in the matrix, as flame-shaped lamellae in orthoclase, and in patches within plagioclase grains.We present a metamorphic model for albite flame growth in the K-feldspar in these rocks that is related to reactions in plagioclase, rather than alkali feldspar exsolution. Flame growth is attributed to replacement and results from a combination of two retrograde reactions and one exchange reaction under greenschist facies conditions. Reaction 1 is a continuous or discontinuous (across the peristerite solvus) reaction in plagioclase, in which the An component forms epidote or zoisite. Most of the albite component liberated by Reaction 1 stays to form albite in the host plagioclase, but some Na migrates to form the flames within the K-feldspar. Reaction 2 is the exchange of K for Na in K-feldspar. Reaction 3 is the retrograde formation of muscovite (as ‘sericite’) and has all of the chemical components of a hydration reaction of K-feldspar. The Si and Al made available in the plagioclase from Reaction 1 are combined with the K liberated from the K-feldspar, to produce muscovite in Reaction 3. The muscovite forms in the plagioclase, rather than the K-feldspar, as a result of the greater mobility of K relative to Al. The composition of the albite flames is controlled by both the peristerite and the alkali feldspar miscibility gaps and depends on the position of these solvi at the pressure and temperature that existed during the reaction. Using an initial plagioclase composition of An20, the total reaction can be summarized as:20 oligoclase + 1 K-feldspar + 2 H2O = 2 zoisite + muscovite + 2 quartz + 15 albiteplagioclase+ 1 albiteflame.This model does not require that any additional feldspar framework be accreted at replacement sites: Na and K are the only components that must migrate a significant distance (e.g. from one grain to the next), allowing Al to remain within the altering plagioclase grain. The resulting saussuritization is isovolumetric.The temperature and extent of replacement depends on when, and how much, water infiltrates the rock. The fugacity of the water, and therefore the pressure of the fluid, may have been significantly lower than lithostatic during flame growth.

Notes: Abstract In metapelitic schists of the north-eastern Weekeroo Inliers, Olary Block, Willyama Supergroup, South Australia, syn-S1 and syn-S2 assemblages involving staurolite, garnet, biotite and another mineral, most probably cordierite, were overgrown by large syn-S3 andalusite porphyroblasts, owing to isobaric heating from metamorphic conditions that existed during the development of S2. Conditions during the development of S3 probably just reached the andalusite—sillimanite transition. During the development of S4, at somewhat lower temperatures than those that accompanied the development of S3, the following reaction occurred:staurolite + chlorite + muscovite ± biotite + andalusite + quartz + H2O.The amount of retrogression is controlled primarily by the amount of H2O added by infiltration. As the syn-S3 matrix assemblage was stable during the development of S4, but the andalusite porphyroblasts were no longer stable with the matrix when H2O was added, the retrogression is focused in and around the porphyroblasts. With enough H2O available, and if quartz was consumed before biotite in a porphyroblast, then the following reaction occurred:staurolite + chlorite + muscovite + corundum ± biotite + andalusite + H2O.This reaction allowed corundum inclusions in the andalusite to grow, regardless of the presence of quartz in the matrix assemblage.

Notes: Abstract Effects of post-entrapment fluid-inclusion modification are examined with reference to retrogression-related quartz veins from the Caledonian, Øse Thrust, northern Norway. The inclusions occur in secondary trails, and contain high-density hypersaline aqueous fluids. On morphological characteristics, they are subdivided into, Type A: elongate, ellipsoidal and/or irregular inclusions, and Type B: more equant, regular, and/or negative crystal form. With reference to previous research on post-entrapment modification of inclusions in quartz it is proposed that Type A inclusions experienced little or no post-entrapment modification, whereas Type B inclusions show features characteristic of post-entrapment permanent inelastic stretching and/or leakage. This produces increased homogenization temperatures (Th), associated with increased inclusion volume and lowering of density, whilst maintaining constant salinity. The similarity of data for degree of fill and salinity between Type A and Type B inclusions indicates that Type B inclusions have primarily modified by stretch rather than leakage. However, the spread towards slightly larger volume of vapour in Type B inclusions suggests that some leakage has also occurred. Because stretched and/or partially leaked inclusions have increased Th, isochore projections significantly underestimate trapping pressure (Pt) relative to unmodified inclusions. Therefore, recognition of post-entrapment inclusion modification due to overpressure is crucial to avoid misinterpretation of data, but has considerable potential for constraining the detail of P-T trajectories of individual rocks. On this basis, rocks from the Øse Thrust zone, north Norway, are shown to have experienced rapid uplift on a ‘clockwise’P-T-t path during the final stages of Caledonian (Scandian) orogenesis.

Notes: Abstract The Erzgebirge Crystalline Complex (ECC) is a rare example where both‘crustal’eclogites and mantle-derived garnet-bearing ultramafic rocks (GBUs) occur in the same tectonic unit. Thus, the ECC represents a key complex for studying tectonic processes such as crustal thickening or incorporation of mantle-derived material into the continental crust. This study provides the first evidence that high-pressure metamorphism in the ECC is of Variscan age. Sm-Nd isochrons define ages of 333 ± 6 (Grt-WR), 337± 5 (Grt-WR), 360± 7 (Grt-Cpx-WR) (eclogites) and 353 ± 7 Ma (Grt-WR) (garnet-pyroxenite). 40Ar/39Ar spectra of phengite from two eclogite samples give plateau ages of 348 ± 2 and 355 ± 2 Ma. The overlap of ages from isotopic systems with blocking temperatures that differ by about 300 ° C indicates extremely fast tectonic uplift rates. Minimum cooling rates were about 50° C Myr-1. As a consequence, the closure temperature of the specific isotopic system is of minor importance, and the ages correspond to the time of high-pressure metamorphism. Despite textural equilibrium and metamorphic temperatures in excess of 800° C, clinopyroxene, garnet and whole rock do not define a three-point isochron in three of four samples. The metamorphic clinopyroxenes seem to have inherited their isotopic signature from magmatic precursors. Rapid tectonic burial and uplift within only a few million years might be the reason for the observed Sm-Nd disequilibrium. The εNd values of the eclogites (+4.4 to +6.9) suggest the protoliths were derived from a long-term depleted mantle, probably a MORB source, whereas the isotopically enriched garnet-pyroxenite (εNd–2.9) might represent subcontinental mantle material, emplaced into the crust prior to or during collision. The similarity of ages of the two different rock types suggests a shared metamorphic history.

Notes: Abstract The crystalline core of the Himalayan orogen in the Langtang area of Nepal, located between the Annapurna-Manaslu region and the Everest region, contains middle to upper amphibolite grade pelitic gneisses and schists. These rocks are intimately associated with the Main Central Thrust (MCT), one of the major compressional structures in the northern Indian plate, which forms a 3.7-km-wide zone containing rocks of both footwall and hangingwall affinity. An inverted metamorphic gradient is noticeable from upper footwall through hangingwall rocks, where metamorphic conditions increase from garnet grade near the MCT zone to sillimanite + K-feldspar grade in the upper hangingwall. Petrographic data distinguish two metamorphic episodes that have affected the area: a high-pressure, moderate-temperature episode (M1) and a moderate-pressure, high-temperature episode (M2). Comparison with appropriate reaction boundaries suggests that conditions for M1 in the hangingwall were approximately 900–1200 MPa and 425–525°C. Thermobarometric results for 24 samples from the footwall, MCT zone and hangingwall reflect P-T conditions during the M2 phase of 400–1200 MPa and 490–660° C. The decrease in estimated palaeopressures from footwall to hangingwall approximate a lithostatic gradient of 27 MPa km-1, with slight fluctuations in the MCT zone reflecting structural discontinuities. In contrast to the palaeopressures, palaeotemperatures are indistinguishable across the entire area sampled. Although field evidence suggests the presence of the inverted palaeothermal gradient well known in the Himalaya, quantitative thermobarometry indicates that temperatures of final equilibration were all within error of each other across 17 km of section. At Langtang, change in pressure is responsible for the presence of the sequence of index minerals through the section. I interpret these data to reflect diachronous attainment of equilibrium temperature conditions in a lithostatic palaeopressure profile after ductile faulting of the sequence.

Notes: Abstract High-pressure-temperature metapelites that occur in close proximity to eclogitized mafic rocks in the southern part of the Gagnon terrane (Parautochthonous Belt, eastern Grenville Province) were investigated in order to constrain depths of burial and P-T paths. Mineral assemblages and partial melting relationships in these metapelites are consistent with peak temperatures in the range between 700 and 800° C. However, growth zoning is apparently well preserved in garnets and only narrow rims (width = 100–500 μm) are obviously affected by diffusional retrograde resetting. Despite uncertainties regarding mineral assemblages and compositions of matrix minerals at early stages of garnet growth, it can be shown that the observed growth zoning profiles of garnets imply increase of both pressure and temperature up to a common maximum at pressures between 1300 and 1600 MPa, and that thermal relaxation did not occur during the initial stages of unloading. On the other hand, calculated retrograde P-T conditions are consistent with steep decompression paths. The inferred ‘hair-pin’-shaped P-T path is consistent with independent evidence of rapid, tectonically driven exhumation, resulting in the preservation of growth zoning in garnets from such a high-temperature regime.

Notes: Abstract A petrogenetic grid and related diagrams derived from KFMASH-system experiments demonstrate that osumilite is stable in relatively magnesian bulk rock compositions (XMg 〉 0.6) at temperatures in excess of 875° C and pressures less than 11 kbar. The experiments, involving the dehydration melting of biotite in synthetic metapelites, were conducted in the range 850–1000° C. Both the mineral assemblages and phase compositions reported from well-documented natural examples of osumilite-bearing rocks are reproduced by the experiments at P-T conditions similar to those previously estimated for these occurrences. Peak metamorphic P-T conditions can be reliably inferred from distinctive osumilite-bearing assemblages identified in the phase diagrams, thereby avoiding the problems of diffusional re-equilibration that often prohibits conventional geothermobarometry from recovering peak conditions. Integration of the experimental data with recent independent experiments, after correcting the latter for an underestimated friction correction, allows extension of the petrogenetic grid to higher temperatures. The extended grid is applied to assess and refine the metamorphic history of the Napier Complex, East Antarctica: the high-P stability limit for osumilite in the Napier Complex is 9–10 kbar, the prograde P-T-t path is not necessarily anticlockwise and isobaric cooling in the Scott and Tula mountains occurred, respectively, at pressures greater and less than reactions in the range 8–9 kbar. The stability range for osumilite predicted by the KFMASH-system petrogenetic grid overlaps many more metamorphic terranes than osumilite is found in. Whilst osumilite is not distinctive in thin section and is prone to retrogression, it is possible that carbon dioxide present in the natural system stabilizes cordierite at the expense of osumilite.

Notes: Abstract Paragonite in textural equilibrium with garnet, omphacite and kyanite is found in two eclogites in the ultrahigh-pressure metamorphic terrane in Dabie Shan, China. Equilibrium reactions between paragonite, omphacite and kyanite indicate a pressure of about 19 kbar at c. 700° C. However, one of the paragonite eclogites also contains clear quartz pseudomorphs after coesite as inclusions in garnet, suggesting minimum pressures of 27 kbar at the same temperature. The disparate pressure estimates from the same rock suggest that the matrix minerals in the ultrahigh-pressure eclogites have recrystallized at lower pressures and do not represent the peak ultrahigh-pressure assemblages. This hypothesis is tested by calibrating a garnet + zoisite/clinozoisite + kyanite + quartz/coesite geobarometer and applying it to the appropriate eclogite facies rocks from ultrahigh- and high-pressure terranes. These four minerals coexist from 10 to 60 kbar and in this wide pressure range the grossular content of garnet reflects the equilibrium pressure on the basis of the reaction zoisite/clinozoisite = grossular + kyanite + quartz/coesite + H2O. The results of the geobarometer agree well with independent pressure estimates from eclogites from other orogenic belts. For the paragonite eclogites in Dabie Shan the geobarometer indicates pressures in the quartz stability field, confirming that the former coesite-bearing paragonite-eclogite has re-equilibrated at lower pressures. On the other hand, garnets from other coesite-bearing but paragonite-free kyanite-zoisite eclogites show a very wide variation in grossular content, corresponding to a pressure variation from coesite into the quartz field. This wide variation, partly due to a rimward decrease in grossular component in garnet, is caused by partial equilibration of the mineral assemblage during the exhumation.

Notes: Abstract The hydrothermal metamorphism of a sequence of Pliocene-aged seamount extrusive and volcanoclastic rocks on La Palma includes a relatively complete low-P-T facies series encompassing the zeolite, prehnite-pumpellyite, and greenschist facies. The observed mineral zonations imply metamorphic gradients of 200–300° C km-1.The transition from smectite to chlorite in the La Palma seamount series is characterized by discontinuous steps between discrete smectite, corrensite and chlorite, which occur ubiquitously as vesicles and, to a much lesser extent, vein in-fillings. Trioctahedral smectites [(Mg/(Fe + Mg) = 0.4–0.75] occur with palagonite and Na-Ca zeolites such as analcime and a thompsonite/natrolite solid solution. Corrensite [(Mg/(Fe + Mg) = 0.5–0.65] first appears at stratigraphic depths closely corresponding to the disappearance of analcime and first appearance of pumpellyite. Discrete chlorite [(Mg/(Fe + Mg) = 0.4–0.6] becomes the dominant layer silicate mineral coincident with the appearance of epidote and andraditic garnet.Within the stratigraphic section there is some overlap in the distribution of the three discrete layer silicate phases, although random interstratifications of these phases have not been observed. Although smectite occurs as both low- and high-charge forms, the La Palma corrensite is a compositionally restricted, 1:1 mixture of low-charge, trioctahedral smectite and chlorite. Electron microprobe analyses of coarse-grained corrensite yield structural formulae close to ideal values based on 50 negative charge recalculations. Calcium (average 0.20 cations/formula unit) is the dominant interlayer cation, with lesser Mg, K and Na.The absence of randomly interlayered chlorite/smectite in the La Palma seamount series may reflect high, time-integrated fluid fluxes through the seamount sequence. This is consistent with the ubiquity of high-variance metamorphic mineral assemblages and the general absence of relict igneous minerals in these samples.

Notes: Abstract Quartz-hosted, synthetic CO2-H2O fluid inclusions behave as open systems with respect to diffusional transfer of hydrogen during laboratory-simulated metamorphic re-equilibration at 650, 750 and 825°C and 1.5 kbar total pressure with fO2 defined by the C-CH4 buffer. Microthermometry and Raman spectroscopy show that the initial CO2-H2O inclusions become CO2-CH4-H2-H2Oinclusions after diffusive influx of hydrogen from the reducing confining medium. Measurable changes are observed in inclusion compositions after only 15 days of re-equilibration, implying significant hydrogen mobility at still lower temperatures over geological time spans. Results of synthetic inclusion re-equilibrium experiments have profound implications for the interpretation of natural fluid-inclusion data; failure to account for potential hydrogen migration in inclusions from high-temperature geological environments may lead to erroneous estimates of P-T, and/or the compositions of metamorphic fluids.

Notes: Abstract Fe-Mg carpholite occurs in metasediments of tectonically disrupted basement, shelf and foreland basin units that structurally underlie the Semail ophiolite in NE Oman. In the lower grade, structurally higher units, Fe-rich carpholite coexists with paragonite, quartz, illite, kaolinite and chlorite, whereas in deeper units, Fe-Mg carpholite occurs with pyrophyllite, sudoite, phengite and/or chloritoid. Mineral compositions in these units indicate that chlorite is more magnesian than coexisting Fe-Mg carpholite at low temperatures and pressures but, at higher metamorphic grades, XMg decreases in the order sudoite 〉 carpholite 〉 chlorite 〉 chloritoid. This suggests a reversal in Fe-Mg partitioning between Fe-Mg carpholite and chlorite at temperatures below or close to those of the breakdown of kaolinite + quartz to pyrophyllite and at XMg= 0.35.Phase relations and mineral equilibria indicate that the P-T conditions of formation of the Fe-Mg-carpholite-bearing rocks of NE Oman range from 280–315° C, 3–6 kbar for the structurally highest units to 325–440° C, 6–9.5 kbar for the deepest units, indicating a systematic down-section increase in metamorphic grade. Textural relations in these rocks, interpreted in the context of pertinent equilibria, are consistent with the clockwise P-T paths previously constrained for these units from petrological studies of interlayered isofacial mafic rocks.

Notes: Metamorphic Petrology. By Akiho Miyashiro. UCL Press Ltd, London, 1994. ISBN 1-85728-037-7 (HB), 1-85728-038-7 (PB)

Notes: Abstract The Santiago Schists are located in the Basal Unit of the Ordenes Complex, one of the allochthonous complexes outcropping in the inner part of the Hercynian Belt in the north-west of the Iberian Peninsula. Their tectonothermal evolution is characterized by the development of an eo-Hercynian metamorphic episode (c. 374 Ma) of high-P, low- to intermediate-T. The mineral assemblage of the high-P episode is preserved as a very thin Si= S1 foliation included in albite porphyroblasts, being composed of: albite + garnet-I + white mica-1 + chlorite-1 + epidote + quartz + rutile ± ilmenite. The equilibrium conditions for this mineral assemblage have been estimated by means of different thermobarometers at 495 ± 10 °C and 14.7 ± 0.7 kbar (probably minimum pressure). The later evolution (syn-D2) of the schists defines a decompressive and slightly prograde P-T path which reached its thermal peak at c. 525 ± 10 °C and 7 kbar. Decompression of the unit occurred contemporaneously with an inversion of the metamorphic gradient, so that the zones of garnet-II, biotite (with an upper subzone with chloritoid) and staurolite developed from bottom to top of the formation.The estimated P-T path for the Santiago Schists suggests that the Basal Unit, probably a fragment of the Gondwana continental margin, was uplifted immediately after its subduction at the beginning of the Hercynian Orogeny. It also suggests that the greater part of the unroofing history of the unit took place in a context of ductile extension, probably related to the continued subduction of the Gondwana continental margin and the contemporaneous development of compensatory extension above it. The inverted metamorphic gradient seems related to conductive heat transferred from a zone of the mantle wedge above the subducted continental margin, when it came into contact with the upper parts of the schists along a detachment, probably of extensional character.The general metamorphic evolution of the Santiago Schists, with the development of high-P assemblages with garnet prior to decompressive and prograde parageneses with biotite, is unusual in the context of the European Hercynian Belt, and shows a close similarity to the tectonothermal evolution of several high-P, low- to intermediate-T circum-Pacific belts.

Notes: Abstract Low-pressure/high-temperature (low-P/high-T) metamorphic rocks of the Cooma Complex, southeastern Australia, show evidence of an anticlockwise pressure-temperature-time-deformation (P-T-t-D) path, similar to those of some other low-P/high-T metamorphic areas of Australia. Prograde paths are reasonably well constrained in cordierite-andalusite schists, cordierite-K-feldspar gneisses and andalusite-K-feldspar gneisses. These paths are inferred to be convex to the temperature axis, involving increase in pressure with increase in temperature. Evidence of the retrograde path is inconclusive, but is consistent with approximately isobaric cooling, as are available isotopic data on the Cooma Granodiorite, which indicate initially rapid cooling following attainment of peak temperatures. The retrograde path is inconsistent with either a clockwise P-T-t-D path involving rapid or even moderate decompression immediately post-dating the peak of metamorphism, or a path in which the retrograde component simply reverses the prograde component, because both these paths should cross reactions forming cordierite from aluminosilicate, for which no evidence has been observed.Determination of the deformational-metamorphic history of the complex is not straightfoward and depends on careful examination of critical samples. Evidence necessary for successful elucidation of the prograde, and part of the retrograde, deformational-metamorphic history in the Cooma Complex includes: (1) sequentially grown porphyroblasts that can be timed relative to surrounding foliations; (2) partial replacement microstructures providing relative timing of metamorphic reactions that cannot be timed relative to foliation development; (3) a tectonic marker foliation (S4 at Cooma) that allows correlation of foliations from one location to another; and (4) single samples containing all of the foliations and all generations of porphyroblast growth within a single metamorphic zone. The latest two or three foliations involve low strain accumulation, allowing relative timing relationships between foliations and porphyroblasts to be more clearly determined.Sequential porphyroblast growth and foliation development in the cordierite-andalusite schists is examined for situations involving rotation and non-rotation of porphyroblasts relative to geographically fixed coordinates. Although the number of foliations developed varies in the rotational situation, depending on the deformation history proposed, the sequential order of porphyroblast growths does not differ from the non-rotational situation. Thus, whether or not porphyroblasts rotated in the Cooma rocks, the sequence of reactions, and therefore P-T-t paths inferred from the relative timing of porphyroblast growths, remain the same, for the deformational histories evaluated.

Notes: Abstract Observations and microthermometric data on fluid inclusions from a terrane that underwent deformation following peak metamorphic conditions show that grain-boundary migration recrystallization favours the entrapment of carbonic inclusions whereas microfracturing during brittle deformation favours the infiltration and eventual entrapment of aqueous fluids. Our results imply that pure CO2 fluid inclusions in metamorphic rocks are likely to be the residue of deformation-recrystallization process rather than representing a primary metamorphic fluid.Where the temperature of deformation can be deduced by other means, the densities of fluid inclusions trapped during recrystallization, which we call recrystallization-primary fluid inclusions, can be used to constrain the ambient pressure during deformation. Using these constraints, the data imply that the post-metamorphic Hercynian exhumation in Sardinia brought rocks at 300° C to within 3km of the surface. This conclusion is similar to that described for the rapidly uplifted Southern Alps in New Zealand.

Notes: Abstract Metapelitic and charnockitic granulites exposed around Chilka Lake in the northern sector of the Eastern Ghats, India, preserve a multi-stage P—T record. A high-T decompression from above 10 kbar to 8 kbar around 1100°C has been determined from Mg-rich metapelites (XMg〉0.60) with quartz-cordierite-orthopyroxene-sillimanite and cordierite—orthopyroxene—sapphirine—spinel assemblages. Between this and a second decompression to 6.0 kbar, isobaric cooling from 830 to 670°C at 8 kbar is evident. These changes are registered by the rim compositions of orthopyroxene and garnet in charnockites and metapelites with an orthopyroxene—quartz—garnet—plagioclase—cordierite assemblage, and are further supported by the garnet + quartz ± orthopyroxene + cordierite and biotite-producing reactions in sapphirine-bearing metapelites. Another indication of isobaric cooling from 800 to 650°C at 6.0 kbar is evident from rim compositions of orthopyroxene and garnet in patchy charnockites. Two sets of P—T values are obtained from metapelites with a quartz—plagioclase—garnet—sillimanite—cordierite assemblage: garnet and plagioclase cores yield 6.2 kbar, 700°C and the rims 5 kbar, 650°C, suggesting a third decompression.The earliest deformation (F1) structures are preserved in the larger charnockite bodies and the metapelites which retain the high P—T record. The effects of post-crystalline F2 deformation are observed in garnet megacrysts formed during or prior to F1 in some metapelites. Fold styles indicate a compressional regime during F1 and an extensional regime during F2. These lines of evidence and two phases of cooling at different pressures point to a discontinuity after the first cooling, and imply reworking.Two segments of the present P—T path replicate parts of the P—T paths suggested for four other granulite terranes in the Eastern Ghats, and the sense of all the paths is the same. This, plus the signature of three phases of deformation identified in the Eastern Ghats, suggests that the Chilka Lake granulites could epitomize the metamorphic evolution of the Eastern Ghats.

Notes: Abstract The Chuncheon amphibolite, part of the Gubongsan Group which overlies the Yongduri gneiss complex, is interlayered with calc-silicate rock, marble, quartzite, biotite schist and quartzofeldspathic gneiss in the central Gyeonggi massif, South Korea. Metamorphic pressures and temperatures estimated from the amphibolite are 5.5–10.6 kbar and 615–714°C. These P—T conditions are close to those defined by the reaction curve between kyanite and sillimanite, and suggest medium-pressure-type metamorphism of the Chuncheon amphibolite. For two metapelites intercalated with the amphibolite, temperatures are estimated to be 607–699° C, consistent with those obtained from the amphibolite. On the other hand, pressures estimated from these metapelites are significantly different, 4–6 kbar and 9–13 kbar, when rim and core compositions of garnet are, respectively, used. These P—T estimates obtained from the amphibolite and metapelite suggest a nearly isothermal decompression of 3–7 kbar during denudation. Rapid decompression is likely on the basis of the results of mineral chemistry, phase equilibria and geothermobarometer. Moreover, in conjunction with the occurrence of kyanite in the adjacent Gyeonggi gneiss complex, P—T estimates of the Chuncheon amphibolite and metapelite suggest a clockwise P—T—t path. This evolutionary path may be related to the amalgamation of continents during the late Proterozoic event which corresponds to the Jinningian orogeny in the Qinling belt of China.

Notes: Abstract The Ruby terrane is an elongate fragment of continental crustal rocks that is structurally overlain by thrust slices of oceanic crust. Our results from the Kokrines Hills, in the south-central part of the Ruby terrane, demonstrate that the low-angle schistose fabric formed under high-P/low-T conditions, at peak conditions of 10.8-13.2 kbar and 425-550° C, consistent with the rare occurrence of glaucophane. White mica 40Ar/39Ar cooling ages from these blueschists indicate that the metamorphism occurred prior to 144 ± 1 Ma. The blueschist facies assemblages are partially replaced by greenschist facies assemblages in the eastern Kokrines Hills. In contrast, in the central and western Kokrines Hills, upper amphibolite to lower granulite facies metamorphism associated with extensive late Early Cretaceous plutonism has completely overprinted any evidence of an earlier high-P/T metamorphic history. Deformation accompanying the plutonism produced recumbent isoclinal folds in the plutonic rocks and pelitic gneisses of the wallrock; decompression reactions in the pelitic gneisses suggest that the deformation occurred during exhumation. Thermochronological data bracket the time of intrusion and cooling below 500° C between 118 ± 3 and 109 ± 1 Ma.Our data from the schists of the Ruby terrane support the general assumption of many authors that the Ruby terrane was subducted beneath an oceanic island arc. This tectonic history is similar to that described for other large continental crustal blocks in northern and central Alaska, in the Brooks Range, Seward Peninsula and Yukon-Tanana Upland. The current orientation of the Ruby terrane at an oblique angle to these other crustal blocks and to the Cordilleran trend is due to post-collisional tectonic processes that have greatly modified the original continental margin.

Notes: Abstract Metagreywackes in the Eastern Belt of the Franciscan Complex contain the assemblage: Qtz + Ab + Lws + Chl + Ph + Pmp + Fgl + Hem ° Cal/Arg or compatible subassemblages. Blue amphibole first appears in the westernmost part of the belt and pumpellyite is absent in the eastern part. The compositions of the coexisting minerals and the nature of the continuous reactions in these low-grade blueschists suggest that the distribution of blue amphibole and pumpellyite in the Eastern Belt of the Franciscan Complex reflects differences of effective bulk composition rather than differences in physical conditions of metamorphism. In rocks lacking pumpellyite, white mica may be essential to the growth of blue amphibole, but carbonate plays only a limited role. The continuous reaction that limits the appearance of blue amphibole and the disappearance of coexisting pumpellyite has the general form: Pmp + Chl + Ab + Qtz + Hem + H2O + FeMg-1= Fgl + Lws. This reaction requires significant hydration as pressure increases in order to produce blue amphibole. Most of the Eastern Belt of the Franciscan Complex formed in limited ranges of temperature and pressure, which are estimated to be 240—280° C, 6.5-7.5 kbar. Pressures in the westernmost part of the area were about 1 kbar lower than in the east. Pressures of about 8.5-10 kbar are estimated for tectonic blocks that contain sodic clinopyroxene.

Notes: Abstract Petrological study of highly strained carbonate and pelitic rocks within the contact aureole surrounding the western part of the Papoose Flat pluton yields thermal profiles (plots of metamorphic temperature versus distance) across the aureole that show temperature gradients which are relatively flat and narrow (〈100m). The gradients occur close to the contact and indicate a slight decrease in temperature from 500–550°C at the pluton/wall rock contact to 450–500°C at the outer margin of the aureole. One thermal profile across low-strain metasedimentary rocks located in the southern part of the aureole shows that thermal effects from emplacement extend no further than 600 m from the contact. Coexistence of andalusite and cordierite in pelitic rocks of the aureole constrain pressures to 〈4 kbar. Thermal modelling using an analytical solution of the conductive heat flow equation for a rectangular-shaped pluton reproduces the observed thermal maxima and profile shape. Conductive rather than convective cooling also is supported by isotopic and field evidence for limited fluid flow along the strongly deformed margin of the pluton. Simple thermal models coupled with observed high-temperature deformation features and a measured 90% attenuation of stratigraphic units in the plastically deformed western part of the pluton's aureole indicate that strain rates may have been of the order of 10-12s-1. Evidence for episodic heating, such as two distinct generations of andalusite growth in pelites from the aureole, alternatively may indicate a longer heating event and, therefore, slower strain rates. Thermal models also indicate that parts of the pluton still may have been above the solidus during deformation of the pluton margin and aureole.

Notes: Abstract The Protogine Zone comprises a system of anastomosing deformation zones which approximately parallel the eastern boundary of the Sveconorwegian (1200–900 Ma) province in south-west Sweden. Ages of granulite facies metamorphism in the Sveconorwegian province require exhumation from c. 30 to 35 km crustal depths after 920–880 Ma. 40Ar/39 Ar cooling ages are presented for muscovite from high-alumina rocks formed by hydrothermal leaching associated with the Protogine Zone. Growth of fabric-defining minerals was associated with a ductile deformational event; muscovite from these rocks cooled below argon retention temperatures (c. 375 ± 25° C) at c. 965–955 Ma. Muscovite from granofels in zones of intense alteration indicates that temperatures 〉 375 ± 25° C were maintained until c. 940 Ma. Textural relations of Al2SiO5 polymorphs and chloritoid suggest that dated fabrics formed during exhumation. The process of exhumation, brittle overprint on ductile structures and hydrothermal activity along faults within the Protogine Zone tentatively are interpreted as the peripheral effects of initial Neoproterozoic exhumation of the granulite region of south-western Sweden.Muscovite in phyllonites associated with the ‘Sveconorwegian thrust system’cooled below argon retention temperatures at c. 927 Ma. Exhumation associated with this cooling could have been related to extension and onset of brittle-ductile deformation superimposed on Sveconorwegian contraction.

Notes: Abstract Orientated symplectites have been observed in deformed granulite facies metabasic rocks from the Ivrea-Verbano zone in northern Italy. The area underwent lower crustal extension, accommodated by movement on localized high-T shear zones. In areas of relatively low strain, such as at the margins of shear zones, symplectites of orthopyroxene, plagioclase and spinel have formed. The symplectites are vermiform and orientated parallel to the main foliation and in the regional stretching direction. The reaction was synkinematic with the deformation, and only developed in potentially dilatant grain boundaries in the rock. It was presumably inhibited in grain boundaries subjected to higher normal stress due to the relatively large volume increase involved in the reaction.The observations support the interpretation that the deformation was related to regional extension under high-T granulite facies conditions, the symplectites forming as a result of decreasing pressure.

Notes: Abstract The E-W-trending Kohistan terrane in the NW Himalaya is a sandwich of a magmatic arc between the collided Karakoram (Asian) and Indian plates. The southern part of the Kohistan arc is principally made up of amphibolites derived from volcanic and plutonic rocks of Early Cretaceous age. Gabbroic relics in the amphibolites display calc-alkaline character, and their mineralogy is similar to low-P plutonic rocks reported from modern and ancient island arcs. The largest of these relics, occurring along the southern margin of the amphibolite belt near Khwaza Khela, is subcircular in outline and is about 1 km across. It consists of cumulate gabbros and related rocks displaying a record of cooling and crustal thickening. Primary olivine and anorthite reacted to produce coronas consisting of two pyroxenes +Mg-Fe2+-Al spinel ± tschermakitic hornblende at about 800° C, 5.5–7.5 kbar. This thermotectonic event is of regional extent and may be related to the overthrusting of the Karakoram plate onto the Kohistan arc some 85 Ma ago, or even earlier. Later the gabbros were locally traversed by veins containing high-P assemblages: garnet, kyanite, zoisite, paragonite, oligoclase, calcite, scapolite and quartz ° Chlorite ° Corundum ± diopside. Formed in the range 510–600° C, and 10–12 kbar, these suggest further thickening and cooling of the crust before its uplift during the Tertiary. This paper presents microprobe data on the minerals, and discusses the tectonic implications of the coronitic and vein assemblages in the gabbros.

Notes: Abstract Granulite facies marbles from the Upper Calcsilicate Unit of the Reynolds Range, central Australia, contain metre-scale wollastonite-bearing layers formed by infiltration of water-rich (XCO2= 0.1–0.3) fluids close to the peak of regional metamorphism at c. 700° C. Within the wollastonite marbles, zones that contain 〈10% wollastonite alternate on a millimetre scale with zones containing up to 66% wollastonite. Adjacent wollastonite-free marbles contain up to 11% quartz that is uniformly distributed. This suggests that, although some wollastonite formed by the reaction calcite + quartz = wollastonite + CO2, the wollastonite-rich zones also underwent silica metasomatism. Time-integrated fluid fluxes required to cause silica metasomatism are one to two orders of magnitude higher than those required to hydrate the rocks, implying that time-integrated fluid fluxes varied markedly on a millimetre scale. Interlayered millimetre -to centimetre-thick marls within the wollastonite marbles contain calcite + quartz without wollastonite. These marls were probably not infiltrated by significant volumes of water-rich fluids, providing further evidence of local fluid channelling. Zones dominated by grandite garnet at the margins of the marl layers and marbles in the wollastonite-bearing rocks probably formed by Fe metasomatism, and may record even higher fluid fluxes. The fluid flow also reset stable isotope ratios. The wollastonite marbles have average calcite (Cc) δ18O values of 15.4 ± 1.6% that are lower than the average δ18O(Cc) value of wollastonite-free marbles (c. 17.2 ± 1.2%). δ13C(Cc) values for the wollastonite marbles vary from 0.4% to as low as -5.3%, and correlations between δ18O(Cc) and δ13C(Cc) values probably result from the combination of fluid infiltration and devolatilization. Fluids were probably derived from aluminous pegmatites, and the pattern of mineralogical and stable isotope resetting implies that fluid flow was largely parallel to strike.

Notes: The equilibrium thermodynamics of the reaction:And the equilibrium constant is composed of activities formulated using ideal mixing on sites. Consideration is given to the evaluation of uncertainties in pressures calculated using the geobarometer. Preliminary testing suggests that the geobarometer has considerable potential. Much wider testing is now required.

Notes: Abstract. Pink piemontite-spessartine-bearing and grey-green spessartine-bearing manganiferous quartzose schists derived from siliceous pelagites, and green quartzofeldspathic schists, are described from the greenschist facies of the Haast Schist terrane, near Arrow Junction, western Otago. Electron microprobe data are reported for sphene, spessartine-rich garnet, manganoan epidote, piemontite, tourmaline, phengitic muscovite, chlorite, albite, haematite, rutile, manganoan calcite and chalcopyrite.Metamorphism occurred at about 6.4kbar, 400°C. Xco2 was above the quartz-rutile-calcite-sphene buffer (Xco2± 0.02) throughout the recorded metamorphic history of the piemontite schists. It dropped from above to below this critical buffering value in a spessartine-rich schist and it was close to or below the buffering value in the quartzofeldspathic schists. Production of piemontite required high fO2, believed to be inherited from MnOx in the parent pelagite. Substantial loss of O2 (e.g. minimum of 0.19% by weight in one rock) during diagenesis and/or metamorphism is inferred. In the grey-green schists this inhibited piemontite formation. Slight loss of O2 and Ca2+ accompanied minor late-stage replacement of piemontite by second generation spessartine. Observed zoning and mineral replacements indicate rise of temperature, drop in pressure, or invasion by solutions of lower fO2 and XCO2 equilibrated with surrounding schists.The detailed chemistry of the minerals studied correlates with available Mn and with bulk-rock (Fe3+ x 100)/(Fe2++ Fe3+). The oxidation ratio ranges from 24 in average green quartzofeldspathic schist, through 78 in average grey-green manganiferous quartzose schist, to almost 100 in some piemontite-bearing schists. As Fe2+ gives way to Fe3+, Mg/Fe ratios tend to rise in chlorite, phengite, tourmaline, spessartine, and calcite, Mn increases and Ti decreases in haematite, Mn increases in spessartine and calcite, and Fe increases in rutile. Available divalent cations are depleted relative to Al; chlorite is more aluminous, and phengite more paragonitic than in typical Haast schists.

Notes: Field, petrographic and microprobe investigations of metaclastic rocks, calcareous schists, marbles, chloritic calcareous meta-volcanic units and schists/paragneisses which crop out along the eastern portion of the Central East-West Cross Island Highway in Taiwan demonstrate that metamorphic intensity gradually increases eastward. The lower greenschist facies Slate Formation on the W contains completely recrystallized, pure albitic plagioclase, but at least some of the white micas (± chlorites) probably represent relict detrital flakes. Neo-blastic biotite and epidote occur sporadically in the Pihou(?) Formation, and increase dramatically eastward; concomitantly the abundance of carbonaceous matter decreases to zero in the eastern Tailuko zone, and the amount of chlorite + white mica diminishes somewhat. Epidote becomes more aluminous at higher metamorphic grade. Eastward, phengites change progressively to more muscovitic compositions as the proportion of biotite increases.A close approach to chemical equilibrium for the pre-Cenozoic, complexly deformed metamorphic basement assemblages is suggested by regular, systematic, major and minor element partitioning between analysed coexisting phases. Fractionation is less pronounced on the E, reflecting higher temperatures. Estimated physical conditions of recrystallization with αH2O and αCO2 moderate, are: T 〉 325 ± 75°C, P 〉 3 kbar (W); T 〉 425 ± 75°C, P 〉 4kbar(E).The gradual eastward increase in metamorphic intensity from the Slate Formation through the Pihou(?) Formation and the three Tailuko zones, as well as the relict precursor textures in the pre-Cenozoic layered basement rocks indicate that the observed paragenetic sequence could represent a synchronous Neogene recrystallization event, probably accompanying the Plio-Pleistocene collision of the Asiatic continental margin and the Luzon (Coastal Range) andesitic arc.

Notes: The structure, microstructure and petrology of a small area close to the village of Bard in Val d'Aosta (Italy) has been studied in detail. The area lies across the contact between the Gneiss Minuti (GM) and the Eclogitic Micaschist (EMS) Complexes of the Lower element of the Sesia portion of the Sesia-Lanzo Zone (Western Alps). Both complexes have undergone high-pressure metamorphism, but the metamorphic assemblages indicate a sudden increase in pressure in going across the contact from the GM to the EMS. Therefore, we interpret the contact as a thrust dividing the lower element of the Sesia into two sub-elements. This interpretation is supported by structural evidence.The early Alpine (90-70 Ma) metamorphic history is best preserved in the EMS and is one of increasing pressure associated with thrusting. The maximum P/T recorded in the EMS is 〉1500 MPa (〉15kbar) and 550°C and in the GM is 〈 1500-1300 MPa (〈 15-13 kbar) and 500-550°C. We suggest that the rocks were probably in an active Benioff zone during this time.From then on the histories of the GM and EMS are the same. Deformation continued and the thrust and thrust slices were folded during decreasing pressure. We interpret the first postthrusting deformation in terms of uplift associated with continued shortening of the crust and underplating after the Benioff zone had become inactive and a new Benioff zone had developed further to the north-west.A still later deformation and the Lepontine metamorphism (38 Ma) are related to continued uplift. Much of this deformation is characterized by structures indicative of vertical shortening and lateral spreading as the mountains rose above the general level of the surface.

Notes: In the Boi Massif of Western Timor the Mutis Complex, which is equivalent to the Lolotoi Complex of East Timor, is composed of two lithostratigraphical components: various basement schists and gneisses; and the dismembered remnants of an ophiolite. Cordierite-bearing pelitic schists and gneisses carry an early mineral assemblage of biotite + garnet + plagioclase + Al-silicate, but contain no prograde muscovite; sillimanite occurs in a textural mode which suggests that it replaced and pseudomorphed kyanite at an early stage and some specimens of pelitic schist contain tiny kyanite relics in plagioclase. Textural relations between, and mineral chemistries of, ferro-magnesian phases in these pelitic chists and gneisses suggest that two discontinuous reactions and additional continuous compositional changes have been overstepped, possibly with concomitant anatexis, as a result of decrease in Pload during high temperature metamorphism. The simplified reactions are: garnet and/or biotite + sillimanite + quartz + cordierite + hercynite + ilmenite + excess components. P-T conditions during the development of the early mineral assemblage in the pelitic gneisses are estimated to have been P + 10 kbar and T 〉 750°C, based upon the plagioclase-garnet-Al-silicate-quartz geobarometer and the garnet-biotite geothermometer. P-T conditions during the subsequent development of cordierite-bearing mineral assemblages in the pelitic gneisses are estimated to have been P + 5 kbar and T + 700°C with XH2O 〈 0.5, based upon the Fe content of cordierite occurring in the assemblage quartz + plagioclase + sillimanite + biotite + garnet + cordierite coexisting with melt.Final equilibration between some of the phases suggests that conditions dropped to P 〉 2.3 kbar and T 〉 600°C. A similar exhumation P-T path is suggested for the pelitic schists with early metamorphic conditions of P 〉 6.2 kbar and T 〉 745°C and subsequent development of cordierite under conditions in the range P = 3-4 kbar and T = 600-700°C. The tectonic implications of these P-T estimates are discussed and it is concluded that the P-T path followed by these rocks was caused by decompression during rifting and synmetamorphic ophiolite emplacement resulting from processes during the initiation and development of a convergent plate junction located in Southeast Asia during late Jurassic to Cretaceous time.

Notes: Plagioclase compositions vary from An0.1–2.5 to An32 with increasing grade in chlorite zone to oligoclase zone quartzofeldspathic schists, Franz Josef-Fox Glacier area, Southern Alps, New Zealand. This change is interrupted by the peristerite composition gap in rocks transitional between greenschist and amphibolite facies grade. Oligoclase (An20-24) and albite (An0.1–0.5) are found in biotite zone schists below the garnet isograd. With increasing grade, the plagioclase compositions outline the peristerite gap, which is asymmetric and narrows to compositions of An12 and An6 near the top of the garnet zone. In any one sample, oligoclase is the stable mineral in mica-rich layers above the garnet isograd, whereas albite and oligoclase exist in apparent textural equilibrium in adjacent quartz-plagioclase layers. The initial appearance of oligoclase in both layers results from the breakdown of epidote and possibly sphene. Carbonate is restricted to the quartz-plagioclase rich layers and probably accounts for the more sodic composition of oligoclase in these layers. The formation of more Ca-rich albite and more Na-rich oligoclase near the upper limit of the garnet zone coincides with the disappearance of carbonate and closure of the peristerite gap. Garnet appears to have only a localized effect on Ca-enrichment of plagioclase in mica-rich layers within the garnet zone. The Na-content of white mica increases sympathetically with increasing Ca-content of oligoclase and metamorphic grade.Comparison of the peristerite gap in the Franz Josef-Fox Glacier schists and schists of the same bulk composition in the Haast River area, 80 km to the S, indicates that oligoclase appears and epidote disappears at lower temperatures, and that the composition gap between coexisting albite and oligoclase is narrower in the Franz Josef-Fox Glacier area. It is suggested that a higher thermal gradient (38-40°C/km) and variations in Si/Al ordering during growth of the plagioclases between the two areas may account for these differences. In the Alpine schists the peristerite gap exists over a temperature and pressure interval of about 370-515°C and 5.5-7 kbar (550-700 MPa) PH2O.

Notes: The Susunai Complex of southeast Sakhalin represents a subduction-related accretionary complex of pelitic and basic rocks. Two stages of metamorphism are recognized: (1) a local, low-P/T event characterized by Si-poor calcic amphiboles; (2) a regional, high-P/T event characterized by pumpellyite, actinolite, epidote, sodic amphibole, sodic pyroxene, stilpnomelane and aragonite. The major mineral assemblages of the high-P/T Susunai metabasites contain pumpellyite + epidote + actinolite + chlorite, epidote + actinolite + chlorite, epidote + Na-amphibole + Na-pyroxene + chlorite-(-haematite. The Na-amphibole is commonly magnesioriebeckite. The Na-pyroxene is jadeite-poor aegirine to aegirine-augite. Application of empirically and experimentally based thermobarometers suggests peak conditions of T= 250–300C, P= 4.7–6 kbar. Textural relationships in Susunai metabasite samples and a petrogenetic grid calculated for the Fe3+-rich basaltic system suggest that pressure and temperature increased during prograde metamorphism.

Notes: In the Llano Uplift of central Texas (USA), prograde homogenization of garnet growth zoning took place during moderate-to high-pressure dynamothermal metamorphism over a narrow temperature range near the transition from the amphibolite to the granulite facies. This subtle record of early dynamothermal metamorphism survived subsequent static metamorphism at low pressures in the middle-amphibolite facies, despite the destruction of most high-pressure mineral assemblages that originated in the early metamorphic episode. Geographically systematic variations in the degree of homogenization indicate that the uplift as a whole underwent high-pressure metamorphism, in accord with emerging tectonic models for the mid-Proterozoic evolution of the southern margin of the North American continent.

Notes: Successful long-term wetland restoration efforts require consideration of hydrology and currounding land use during the site selection process. This article describes an approach to initial site selection in the San Luis Rey River watershed in southern California that uses watershed-level information on basin topography and land cover to rank the potential suitability of all sites within a watershed for either preservation of restoration. This approach requires the use of a geographic information system (GIS)to map relative wetness and land cover within a watershed. Relative potential wetness values were derived from U.S. Geological Survey (USGS) 30-m digital elevation models by calculating the flow that would potentially accumulate at all 30-m × 30-m pixels within the watershed. Land cover was derived from a Landsat scene covering the 1500 Km2 study area. We ranked sites (contiguous groups of pixels 〉 1 ha with similar land cover) in terms of their potential for restoration or preservation based on their wetness values (Iow, medium, and high), size, and proximity to existing riparian vegetation. Sites with medium or high wetness values and extant vegetation were identified as potential preservation sites. Agiricultural or barren sites with medium to high wetness were identified as potential restoration sites. Approximately 5500 ha (3.67% of the total watershed) were prioritized for preservation or resloration.

Notes: This historical and conceptual overview of riparian ecosystem restoration discusses how riparian ecosystems have been defined, describes the hydrologic, geomorphic, and biotic processes that create and maintain riparian ecosystems of the western USA, identifies the main types of anthropogenic desturbances occurring in these ecosystems, and provides an overview of restoration methods for each disturbance type. We suggest that riparian ecosystems consist of two zones: Zone I occupies the active floodplain and is frequently inundated and Zone II extends from the active floodplain to the valley wall. Successful restoration depends n understanding the physical and biological processes that influence natural riparian ecosystems and the types of disturbance that have degraded riparian areas. Thus we recommend adopting a process-based approach for riparian restoration. Disturbances to riparian ecosystems in the western USA result from streamflow modifications by dams, reservoirs, and diversions; stream channelization; direct modification of the riparian ecosystem; and watershed disturbances. Four topics should be addressed to advance the state of science for restoration of riparian ecosys-tems: (1) interdisciplinary approaches, (2) a unified framework, (3) a better understanding of fundamental riparian ecosystem processes, and (4) restoration po-tential more closely related to disturbance type. Three issues should be considered regarding the cause of the degraded environment: (1) the location of the causative disturbance with respect to the degraded riparian area, (2) whether the disturbance is ongoing or can be elim-inated, and (3) whether or not recovery will occur nat-urally if the disturbance is removed.

Notes: A two-stage system for selecting stream reaches and riparian communities for restoration was applied to the 80-km San Luis Rey River below the Lake Henshaw dam in southern California. In the first satge, data from topographic quadrangles and aerial photographs were analyzed to define and classiy reaches. These analyses concluded that (1) 28 km of the river and adjacent floodplain were suitable for second-stage evaluation of restoration needs and (2) 32 km met criteria for reference conditions at the stream reach scale and should be protected from further impacts. The remaining 20 km of the river and floodplain were considered unsuitable for restoration to reach-scale reference conditions; individual sites may be restored under existing regulatory review. Second-stage field sampling provided data on vegetation and floodplain landforms and substrate from more thatn 3000 plots within the 28 km of river and 1120 ha of floodplain selected for further Study. Classification of floristic samples stratified by landform/substrate class indicated six primary riparian communities on the floodplain, some associated with particular floodplain landform/substrate classes and others ubiquitous. Reference conditions for these communities were interpreted from the data. There were two major departures from reference conditions: tree-dominated communities were less extensive than historic levels and exotic plants had significantly invaded some landforms and communities, displacing natural com-munities. General goals would include restoration of tree communities and removal of exotics, with further consideration of site-specific objectives. The results included estimates of the areas by community type re-quiring restoration. The approach was developed for streams in the semi-arid western United States, but it may be adapted for use elsewhere.

Notes: This study compares the results of Olson and Harris (1997) and Russell et al. (1997) in their work to prioritize sites for riparian restoration in the San Luis Rey River watershed. Olson and Harris defined reaches of the mainstem and evaluated the relative potential for restoration and protection based on cover of natural vegetation, land use, and connectivity. Then they used data on geomorphic conditions, plant species composition, and community structure to prescribe strategies for restoration. Russell et al. used a modeling approach within a geographic information system to combine data on wetness and land use/land cover to identify areas with potential for protection and restoration. They prioritized the areas based on patch size and proximity to extant riparian habitat. The main-stem and associated floodplain defined by Olson and Harris was more than twice the size of the area defined by Russell et al., because Olson and Harris considered the entire valley floor, whereas Russell et al. used a wetness index to identify saturated zones within the floodplain. For seven of the twelve management units delineated along the mainstem, the two studies agreed on a strategy of restoration or protection. They differed on two. No comparison could be made of the three units for which Olson and Harris used project review, a unique category. Agreement of the results is due to the similarity of criteria used to identify and rank sites for protection and restoration; disagreement is due primarily to the level of resolution of the data. Both approaches have potential for use in watershed-level planning. The predictive power of the two approaches may be maximized when they are used in a complementary fashion.

Notes: We present a conceptual model for identifying restoration sites for riparian wetlands and discuss its application to reaches within the Upper Arkansas River basin in Colorado. The model utilizes a Geographic Information System (GIS) to analyze a variety of spatial data useful in characterizing geomorphology, hydrology, and vegetation of riparian wetland sites. The model focuses on three basic properties of riparian wetland sites: relative soil moisture, disturbance regime, and vegetative characteristics. A relative wetness index is used to define nominal soil moisture classes within the watershed. These classes generally coincide with uplands (low), channel margins (moderate), and channels or open water (high). Vegetative conditions are characterized using color infrared aerial photographs. Land cover types are grouped into five major land cover classes: riparian, moist herbaceous, bare ground, upland, and open water. Disturbance regime is characterized by a reach-based index of specific power (ω). Preliminary results indicate that reaches within the Upper Arkansas River basin can be classified as high energy (ω≥ 8 W/m2) or low energy (ω≤ 3W/m2), using discharge estimates that reflect the 10-year flood event. Field surveys of channel and floodplain conditions show that high-energy reaches (ω≥ 8 W/m2) are characterized by sites where the channel occupies a large proportion of the valley bottom. By contrast, low-energy reaches (ω≤ 3 W/m2) are characterized by meandering channels with wide alluvial valleys. Restoration potential is evaluated as a combination of nominal scores from wetness, land cover, and disturbance indices. Application of these methods to field sites within the Upper Arkansas River basin identifies a wide range of riparian wetland sites for preservation or restoration. Potential sites within identified reaches are prioritized using size and proximity criteria.

Notes: A major goal of population biologists involved in restoration work is to restore populations to a level that will allow them to persist over the long term within a dynamic landscape and include the ability to undergo adaptive evolutionary change. We discuss five research areas of particular importance to restoration biology that offer potentially unique opportunities to couple basic research with the practical needs of restorationists. The five research areas are: (1) the influence of numbers of individuals and genetic variation in the initial population on population colonization, establishment, growth, and evolutionary potential; (2) the role of local adaptation and life history traits in the success of restored populations; (3) the influence of the spatial arrangement of landscape elements on metapopulation dynamics and population processes such as migration; (4) the effects of genetic drift, gene flow, and selection on population persistence within an often accelerated, successional time frame; and (5) the influence of interspecific interactions on population dynamics and community development. We also provide a sample of practical problems faced by practitioners, each of which encompasses one or more of the research areas discussed, and that may be solved by addressing fundamental research questions.

Notes: Books reviewed in this article: Biotic Interactions and Global Change P. M. Kareiva, J. G., Kingsolver, and R. B. Huey, editors Defining Sustainable Forests G.H. Aplet, N. Johnson, J. T. Olson, and V. A. Sample, editors

Notes: Despite this nation's massive effort during the past 90 years to build levees throughout the upper Mississippi Basin, mean annual flood damage in the region has increased 140% during that time. These levees exacerbate the flood damage problem by increasing river stage and velocity. Thus, rather than continuing to rely on structural solutions for flood control, it is time to develop a comprehensive flood management strategy that includes using wetlands to intercept and hold precipitation where it falls and store flood waters where they occur. History testifies to the truth of this premise: it was the rampant drainage of wetlands in the nineteenth century that gave rise to many of today's water resources management problems. The 1993 flood verifies the need for additional wetlands: the amount of excess water that passed St. Louis during the 1993 flood would have covered a little more than 13 million acres —half of the wetland acreage drained since 1780 in the upper Mississippi Basin. By strategically placing at least 13 million acres of wetlands on hydric soils in the basin, we can solve the basin's flooding problems in an ecologically sound manner.

Notes: We consider the general problem of price discrimination with nonlinear pricing in an oligopoly setting where firms are spatially differentiated. We characterize the nature of optimal pricing schedules, which in turn depends importantly upon the type of private information the customer possesses–either horizontal uncertainty regarding brand preference or vertical uncertainty regarding quality preference. We show that as competition increases, the resulting quality distortions decrease, as well as price and quality dispersions. Additionally, we indicate conditions under which price discrimination may raise social welfare by increasing consumer surplus through encouraging greater entry.

Notes: We model an internal labor market in which employee behavior and compensation are affected by the firm's financial position and the threat of hostile takeover or other exercise of shareholder “voice.” We show how good past performance can result in excessively generous promotion and pay decisions. While the threat of shareholder activism will remove this “slack,” activists optimally face a positive cost barrier, which in turn varies across firms. The cost barrier is higher when cooperation or “helping” between employees is more important, and is lower when employees receive efficiency wages due to an inability to “pay” for their jobs. Since the importance of helping is associated with pay compression and “flat” pay ladders, such firms should also exhibit a greater degree of management entrenchment.

Notes: The literature on the incentives for R & D cooperation with spillovers typically deals only with the factors affecting cooperative profits. This paper focuses on the incentives to cheat and the stability of such cooperative agreements in a repeated game framework. It is shown that the stability of cooperation is influenced by the nature and magnitude of spillovers, relative to the nature and degree of product market competition. While cooperative profits are higher with large positive (exogenous, unintended) know-how spillovers, such as in fundamental research, our anslysis shows that it may be easier to sustain cooperation in areas with lower spillovers, such as applied research, because of the smaller incenfives to cheat on the initial agreement, at least when firms produce substitutes. Alternatively, the possibility of technology sharing (i.e., intended or endogenous spillovers), besides R&D coordination, not only increases cooperative profits but also reduces the incentives to defect from a cooperative equilibrium.

Notes: In a moral hazard setting, we model the fact that the agent may get private signals about the final outcome of his effort before the public realization of this outcome. Actions affect both the distribution of the outcome and the quality of the agent's private information. We compare simple contracts, based on output only, with revelation contracts, based on output and messages about signals. Revelation contracts give the agent some discretionary power during the course of the relationship; they are optimal if and only if lowering effort does not increase the quality of private information in the sense of Blackwell (1953). In the context of managerial compensation schemes, the revelation contracts we analyze can be viewed as allowing the agent to exercise an option on the final profits before the realization of these profits. The theory thus provides an alternative justification of the widespread use of stock options in managerial compensation schemes, as opposed to compensation schemes that rely only on salary, bonus, and (restricted) stock plans.

Notes: Analysis of seven wholesale and retail markets for long-distance telephone services since the AT & T divestiture indicates that service provider concentration declined in the later 1980s and then stabilized in the 2990–1993 period. In addition to this stability in market shares, a number of other conditions established since 1990 have been conducive to the development of market sharing rather than significant price competition. The most important of these conditions has been the tarifing process of the Federal Communications Commission by which MCI and Sprint replicate ATGT's price announcements. As market shares stabilized and became more equal, and as regulation formalized the price-setting process, the price-cost margins of the three large carriers increased and became more nearly identical. These results are consistent not with price competition but rather with emerging tacit collusion among AT&T, MCI, and Sprint.

Notes: The Federal Communications Commission held its first auction of radio spectrum at the Nationwide Narrowband PCS Auction in July 1994. The simultaneous multiple-round auction, which lasted five days, was an ascending bid auction in which all licenses were offered simultaneously. This paper describes the auction rules and how bidders prepared for the auction. The full history of bidding is presented. Several questions for auction theory are discussed. In the end, the government collected $617 million for ten licenses. The auction was viewed by all as a huge success an excellent example of bringing economic theory to bear on practical problems of allocating scarce resources.

Notes: This study examines the investment patterns of all large local exchange telephone companies in the United States over time. It identifies how different regulatoy environments have influenced the recent historical pattern of investment in modern infrastructure equipment. It focuses exclusively on the postdivestiture experience of local telephone exchange companies (LECs). It examines the growth of fiber-optic deployment and of complementary equipment associated with the modernization of today's information infrastructure. The study estimates the influence of different regulatory structures on infrastructure deployment by LECs. The study is unique in that if relates individual LEC investment patterns to LEC-specific regulatory, demographic, and economic characteristics. Thus, it isolates the contribution of state regulatory policies from that of other demographic and economic factors in the determination of infrastructure deployment at the state LEC rather than at the corporate level. Its main findings are as follows: First, price regulation (and, in particular, price caps) is a more potent regulatory mechanism than the standard earnings sharing scheme. Second, when associated with an earnings sharing scheme, price regulation is less effective in triggering infrastructure deployment than when it is implemented by itself. These results raise questions about the effectiveness of a popular regulatory instrument-earnings sharing schemes-and highlight the effectiveness of generic price-cap regulation. These results have implications for the design of regulatory policy at both the state and federal levels. In particular, given the importance currently being placed on the development of the information superhighway, regulatory emphasis should be focused more on price regulation than on regulating profits.

Notes: The House and Senate of the United States Congress recently passed legislation that directs the FCC to establish a system for using auctions to allocate the use of radio spectrum for personal communications services. There is a unique and unprecedented set of issues that arise in this context, which are of interest to economists, industry analysts, regulators, and policymakers. We discuss these issues and evaluate their likely impact on the outcome of the spectrum auctions. In addition, we argue that there may be pitfalls in the auction procedure adopted by the FCC, and we discuss possible alternative procedures.

Notes: Royalty payments from a franchisee to a franchisor serve as incentive for the franchisor to provide appropriate levels of quality and brand, name investment. However, since they also distort the service provided by the franchisee, we should expect relatively lower royalty rates in franchises that are primarily service-oriented. Casual examination of royalty rates across product-oriented and service-oriented franchises shows that the opposite is true, with service-type franchises enjoying higher royalty rates. We resolve this apparent puzzle. The basic argument we put forth is that in product-type franchises, a franchisor can charge a wholesale price on goods transferred to the franchisee, thus using an alternative instrument that also serves as an incentive for the franchisor. Moreover, in general, a franchisor will use both wholesale price and royalty to minimize distortions in retail price and service at the retail level. We then test the predictions of our model on different industries and find confirmation for the same.

Notes: The use of uncertainty factors in the standard method for deriving acceptable intake or exposure limits for humans, such as the Reference Dose (RfD), may be viewed as a conservative method of taking various uncertainties into account. As an obvious alternative, the use of uncertainty distributions instead of uncertainty factors is gaining attention. This paper presents a comprehensive discussion of a general framework that quantifies both the uncertainties in the no-adverse-effect level in the animal (using a benchmark-like approach) and the uncertainties in the various extrapolation steps involved (using uncertainty distributions). This approach results in an uncertainty distribution for the no-adverse-effect level in the sensitive human subpopulation, reflecting the overall scientific uncertainty associated with that level. A lower percentile of this distribution may be regarded as an acceptable exposure limit (e.g., RfD) that takes account of the various uncertainties in a nonconservative fashion. The same methodology may also be used as a tool to derive a distribution for possible human health effects at a given exposure level. We argue that in a probabilistic approach the uncertainty in the estimated no-adverse-effect-level in the animal should be explicitly taken into account. Not only is this source of uncertainty too large to be ignored, it also has repercussions for the quantification of the other uncertainty distributions.

Notes: This research explores public judgments about the threat-reducing potential of experts, individual behavior, and government spending. The data are responses of a national sample of 1225 to mail surveys that include measures of several dimensions of public judgments about violent crime, automobile accidents, hazardous chemical waste, air pollution, water pollution, global warming, AIDS, heart disease, and cancer. Beliefs about who can best mitigate threats are specific to classes of threats. In general, there is little faith that experts can do much about violent crime and automobile accidents, moderate faith in their ability to address problems of global warming, and greater expectations for expert solutions to the remaining threats. People judge individual behavior as effective in reducing the threats of violent crime, AIDS, heart disease, and automobile accidents but less so for the remaining threats. Faith in more government spending is highest for AIDS and the other two health items, lowest for the trio of violent crime, automobile accidents, and global warming, and moderate for the remaining threats. For most threats, people are not distributed at the extremes in judging mitigators. Strong attitudinal and demographic cleavages are also lacking, although some interesting relationships occur. This relative lack of sharp cleavages and the generally moderate opinion indicate ample opportunity for public education and risk communication.

Notes: Recreational and subsistence hunters and anglers consume a wide range of species, including birds, mammals, fish and shellfish, some of which represent significant exposure pathways for environmental toxic agents. This study focuses on the Department of Energy's (DOE'S) Savannah River Site (SRS), a former nuclear weapons production facility in South Carolina. The potential risk of contaminant intake from consuming mourning doves (Zenaida macroura), the most popular United States game bird, was examined under various risk scenarios. For all of these scenarios we used the mean tissue concentration of six metals (lead, mercury, cadmium, selenium, chromium, manganese) and radiocesium, in doves collected on and near SRS. We also estimated risk to a child consuming doves that had the maximum contaminant level. We used the cancer slope factor for radiocesium, the Environmental Protection Agencies UptakeBiokinetic model for lead, and published reference doses for the other metals. As a result of our risk assessments we recommend management of water levels in contaminated reservoirs so that lake bed sediments are not exposed to use by gamebirds and other terrestrial wildlife. Particularly, measures should be taken to insure that the hunting public does not have access to such a site. Our data also indicate that doves on popular hunting areas are exposed to excess lead, suggesting that banning lead shot for doves, as has been done for waterfowl, is desirable.

Notes: Exposure duration is an important component in determining long-term dose rates associated with exposure to environmental contaminants. Surveys of exposed populations collect information on individuals' past behaviors, including the durations of a behavior up to the time of the survey. This paper presents an empirical approach for determining the distribution of total durations that is consistent with the distribution past durations obtained from surveys. This approach is appropriate where the rates of beginning and ending a behavior are relatively constant over time. The approach allows the incorporation of information on the distribution of age in a population into the determination of the distribution of durations. The paper also explores the impact of “longevity” bias on survey data. A case study of the application of this approach to two angler populations is also provided. The results of the case study have characteristics similar to the results reported by Israeli and Nelson (Risk Anal. 12, 65-72 (1992)) from their analytical model of residential duration. Specifically, the average period of time for the total duration in the entire population is shorter than the average period of time reported for historical duration in the surveyed individuals.

Notes: Information format can influence the extent to which target audiences understand and respond to risk-related information. This study examined four elements of risk information presentation format. Using printed materials, we examined target audience perceptions about: (a) reading level; (b) use of diagrams vs. text; (c) commanding versus cajoling tone; and (d) use of qualitative vs. quantitative information presented in a risk ladder. We used the risk communication topic of human health concerns related to eating noncommercial Great Lakes fish affected by chemical contaminants. Results from the comparisons of specific communication formats indicated that multiple formats are required to meet the needs of a significant percent of anglers for three of the four format types examined. Advisory text should be reviewed to ensure the reading level is geared to abilities of the target audience. For many audiences, a combination of qualitative and quantitative information, and a combination of diagrams and text may be most effective. For most audiences, a cajoling rather than commanding tone better provides them with the information they need to make a decision about fish consumption. Segmenting audiences regarding information needs and communication formats may help clarify which approaches to take with each audience.

Notes: Using exploratory data analysis, probability plots, scatterplots, and computer animations to rotate and visualize the data, we fit a trivariate Normal distribution to data for the height, the natural logarithm of body weight, and the body fat for 646 men between the ages of 50 and 80 years as reported by the medical staff of the U.S. Veterans Administration's “Normative Aging Study” in Boston, MA. Although these data do not include any children, women, or young men, the measurements represent the best data that we could find through a 4-year search. We believe that these data are well measured and reliable for men in the specified age range and that these data reveal an interesting statistical pattern for use in probabilistic PBPK models.

Notes: Significant research work has been completed in the development of risk-based inservice inspection (ISI) and testing (IST) technology for nuclear power plant applications through the ASME Center For Research and Technology Development. This paper provides technology that has been developed for these engineering applications. The technology includes risk-based ranking methods, beginning with the use of plant probabilistic risk assessment (PRA), for the determination of risk-significant and less risk-significant components for inspection and the determination of similar populations for pumps and valves for inservice testing. Decision analysis methods are outlined for developing ISI and IST programs. This methodology integrates nondestructive examination data, structural reliability/risk assessment results, PRA results, failure data, and expert opinion to evaluate the effectiveness of ISI programs. Similarly, decision analysis uses the output of failure mode and causes analysis in combination with data, expert opinion, and PRA results to evaluate the effectiveness of IST programs. Results of pilot applications of these ASME methods to actual nuclear plant systems and components are summarized. The results of this work are already being used to develop recommended changes in ISI and IST requirements by the ASME Section XI and the ASME Operation and Maintenance Code organizations. A perspective on Code and regulatory adoption is also outlined. Finally, the potential benefits to the nuclear industry in terms of safety, person-rem exposure, and costs are summarized.

Notes: Probabilistic Seismic Hazard Analysis (PSHA) is a methodology that estimates the likelihood that various levels of earthquake-caused ground motions will be exceeded at a given location in a given future time period. Due to large uncertainties in all of the geosciences data and in their modeling, multiple model interpretations are often possible. This leads to disagreements among the experts, which in the past has led to disagreement on the selection of a ground motion for design at a given site. This paper reports on a project, co-sponsored by the U.S. Nuclear Regulatory Commission, the U.S. Department of Energy, and the Electric Power Research Institute, that was undertaken to review the state-of-the-art and improve on the overall stability of the PSHA process, by providing methodological guidance on how to perform a PSHA. The project reviewed past studies and examined ways to improve on the present state-of-the-art. In analyzing past PSHA studies, the most important conclusion is that differences in PSHA results are commonly due to process rather than technical differences. Thus, the project concentrated heavily on developing process recommendations, especially on the use of multiple experts, and this paper reports on those process recommendations. The problem of facilitating and integrating the judgments of a diverse group of experts is analyzed in detail. The authors believe that the concepts and process principles apply just as well to non-earthquake fields such as volcanic hazard, flood risk, nuclear-plant safety, and climate change.

Notes: Trichloroacetic acid (TCA) is major metabolite of trichloroethylene (TRI) thought to contribute to its hepatocarcinogenic effects in mice. Recent studies have shown that peak blood concentrations of TCA in rats do not occur until approximately 12 hours following an oral dose of TRI. However, blood concentrations of TRI reach maximum within an hour and are nondetectable after 2 hours.(1) The results of study which examined the enterohepatic recirculation (EHC) of the principle TRI metabolited(2) was used to develop physiologically-based pharmacokinetic model for TRI, which includes enterohepatic recirculation of its metabolites. The model quantitatively predicts the uptake, distribution and elimination of TRI, trichloroethanol, trichloroethanol-glucuronide, and TCA and includes production of metabolites through the enterohepatic recirculation pathway. Physiologic parameters used in the model were obtained from the literature.(3.4) Parameters for TRI metabolism were taken from Fisher et al.(5) Other kinetic parameters were found in the literature or estimated from experimental data.(2) The model was calibrated to data from experiments of an earlier study where TRI was orally administered(2) Verification of the model was conducted using data on the enterohepatic recirculation of TCEOH and TCA(2) chloral hydrate data (infusion doses) from Merdink,(1) and TRI data from Templin(l) and Larson and Bull.(1)

Notes: Estimates were made of the numbers of liver carcinogens in 390 long-term bioassays conducted by the National Toxicology Program (NTP). These estimates were obtained from examination of the global pattern of p-values obtained from statistical tests applied to individual bioassays. Representative estimates of the number of liver carcinogens (90% confidence interval in parentheses) obtained in our analysis compared to NTP's determination are as follows: female rats—49 (23, 76), NTP = 30; male rats—88 (59, 116), NTP = 35; female mice—131 (105, 157), NTP = 81; male mice—100 (73, 126), NTP = 61; overall—166 (135, 197), NTP = 108. The estimator from which these estimates were obtained is biased low by an unknown amount. Consequently, this study provides persuasive evidence of the existence of more rodent liver carcinogens than were identified by the NTP.

Notes: In north-central Wopmay Orogen, syntectonic low-P(Buchan-type) suites of mineral isograds outline regional metamorphic temperature culminations that are associated, at the higher structural levels, with emplacement of early Proterozoic plutons in the west part of a deformed and eastward transported continental margin prism. The mapped isograds mark the first occurrence of biotite, staurolite, andalusite, sillimanite, sillimanite-K feldspar and K feldspar-plagioclase-quartz ± muscovite (granitic) pods in metapelites, with increasing proximity to the plutons.Microprobe analyses and field observations have resulted in the formulation of reactions for the ‘ideal’pelitic system K2O-Na2O-FeO-MgO-Al2O3-SiO2-H2O-Al2O3-SiO2-H2O, to account for the various mineral assemblages of each metamorphic zone. A P-T petrogenetic grid showing erosion surface P-T curves for the northern Wopmay Orogen pelites, compiled on the basis of the mapped isograds and the inferred reaction(s) for each metamorphic zone, documents a variation in exposed metamorphic pressure ranging between 2 and 4 kbar.The configuration of a new bathograd, based on the invariant model reaction sillimanite + K feldspar + plagioclase + biotite + quartz + vapor ± muscovite + liquid and interpolated across three metamorphic suites, is consistent with a major regional structure culmination and with independently determined pressures obtained from anorthite-grossular-quartz-Al2SiO5 geobarometry. The positive correlation between the configuration of the bathograd and the structural and pressure culmination points to the pressure-dependence of anatectic-granitic-pod mineral associations.

Notes: Variations in assemblage and composition of the constituent minerals in basic and intermediate metavolcanics encountered in the Zarouchla Group of the Phyllite-Quartzite Series are consistent with a progressive sequence, corresponding to temperature conditions estimated at 290-380°C (minimum values) under a total pressure greater than 3°5kbar and possibly as high as 5 kbar. In the absence of more critical evidence, the parageneses recorded in the metavolcanic rocks are interpreted as belonging to a prograde facies series from the lawsonite-albitechlorite facies through the pumpellyite-actinolite facies to the greenschist facies. The present distribution of mineral assemblages does not show a simple increase of metamorphic grade in a given direction but is apparently related to the tectonic evolution of the metamorphic sequence.

Notes: Abstract Mylonites from shear zones cutting Hercynian gneisses in the central Pyrenees have been studied in thin section and using the electron microprobe. The shear zones contain retrogressive greenschist facies assemblages implying introduction of an aqueous fluid during deformation in the zones. Textural evidence suggests that fluid-rock interaction occurred throughout the active life of the shear zones.Whole-rock chemical changes during deformation are documented in a variety of mylonitic lithologies and retrogressed country rocks. The overall effect was to reduce chemical differences between lithologies. Activity diagrams show that this would be expected if a hydrous fluid was circulating between different lithologies during deformation. In most cases fluid/rock ratios were relatively small resulting in gradual chemical changes and repeated recrystallization. ‘Open-system’behaviour with reduction in the number of phases is seen in some granite mylonites, suggesting focusing of fluid movement in parts of the shear zones. Continual fluid-rock interaction may have led to reaction-enhanced ductility in the shear zones over a long period of time. The source of fluid is uncertain, but may be related to underthrusting of material beneath the area investigated.

Notes: Abstract The hornblende-bearing basic gneisses in the Uvete area, central Kenya, were metamorphosed under a narrow range of P and T (6.5 ± 0.5kbar and 530 ± 40°C) of the staurolitekyanite zone in the Mozambique metamorphic belt. They show a wide variety of divariant and trivariant mineral assemblages consisting of hornblende, cumminatonite, gedrite, anthophyllite, chlorite, garnet, epidote, clinopyroxene, plagio-clase and quartz. The bulk and mineral chemistries and the graphical representation of phase relations show that each mineral assemblage approaches chemical equilibrium and defines a unique composition volume in the A′(Al + Fe3+− (13/7)Na)-F(Fe2+)-M′(Mg)-C′(Ca-(3/7)Na) tetrahedron. The composition volumes are distributed quite regularly and do not overlap each other.The phase relations in the Uvete area are in contrast with those in the staurolite-kyanite zone amphibolites in the Mt. Cube quadrangle, Vermont. The amphibolites there contain low-variance mineral assemblages formed under different values of μH2O and μCO2. These assemblages define overlapping composition volumes in the A′-F′-M′-C’tetrahedron.The mineral assemblages in the Uvete area are interpreted as having formed in equilibrium with fluid at a high and nearly constant μH2O value. Such a fluid composition was externally controlled by the supply of H2O-rich fluid expelled from the surrounding pelitic and psammitic rocks. The body size of the basic gneisses in the Uvete area (less than 400m in thickness) was small enough for the fluid to migrate completely.

Notes: Abstract Blueschist-facies rocks on the Seward Peninsula constitute a structurally coherent terrane measuring at least 100 × 150 km. Radiometric age data indicate that high-pressure metamorphism probably occurred in Jurassic rather than in Palaeozoic or Precambrian time, as previously suggested. Protolith sediments (Nome Group) are of intracontinental basin or continental margin type, and of lower Palaeozoic and possibly late Precambrian age, thus predating the high pressure metamorphism by more than 200 m.y.Blueschist-facies mineral assemblages were developed in almost all lithologies of the Nome Group, and are best preserved in FeTi-rich metabasites (glaucophane + almandine + epidote) and pelites (glaucophane + chloritoid + phengite). A lawsonite–crossite subfacies was developed in possible Nome Group rocks on the east flank of the Darby Mountains. Albite–epidote–amphibolite facies assemblages characterize Nome Group rocks in the southwestern part of the Peninsula. Metamorphism in the central zone of the terrane passed from early lawsonitic to subsequent epidote–almandine–glaucophane schist subfacies with the local development (east of the Nome River) of eclogitic assemblages.The high pressure metamorphic minerals were synkinematic with the development of mesoscopic-scale intrafolial isoclinal folds and a flattening foliation of consistent orientation. Initiation of uplift probably corresponded to the growth of barroisite rims on earlier sodic and actinolitic amphiboles, and partial post-kinematic greenschist facies replacements record later stages of decompression. Ophiolites and melange are not associated with the Seward Peninsula blueschists. The high-pressure metamorphism was caused by tectonic loading of a continental plate by an allochthon of indeterminate origin. The PT conditions of high pressure metamorphism were approximately 9–11 kbar, 400–450°C, thus falling between the PT paths of the Shuksan and Franciscan terranes.

Notes: Abstract Two periods of garnet growth (Gt1 and Gt2) have been found in the Finnmarkian nappes of north Norway. In the Kolvik Nappe (the lowest nappe) Gt1 has preserved an S2 syntectonic spiral inclusion fabric; in the Olderfjord Nappe an earlier S1 fabric and an interkinematic inter-D1–D2 fabric have been preserved in Gt1 whilst only the S1 fabric has been found in Gt1 in the Brennsvik Nappe (the highest nappe). In each nappe Gt2 overgrew a penetrative fabric (S2) wrapped around Gt1. In the Kolvik Nappe inclusion fabrics may be continuous from Gt1 into Gt2 but in the higher nappes there is a distinct break. Gt2 may have been partially syntectonic with D3 in the Brennsvik Nappe.Chemically Gt1 in the Kolvik Nappe and in parts of the Olderfjord and Brennsvik Nappes has antithetic Fe-Mn zoning. In all nappes XCa and XMg are weakly zoned in Gt1; XMg increases outwards and is greater in the higher nappes in Gt1 suggesting higher nucleation temperatures. In the Olderfjord and Brennsvik Nappes Gt2 is marked by increasing XCa, probably due to changing garnet-plagioclase equilibria, although the Fe/Mg ratio remains constant. XMg is higher in Gt2 than Gt1.Basement rocks within the nappe pile have an early pre-Finnmarkian growth (Gt1) and a later Finnmarkian growth (GtH) correlated with Gt2 on the basis of chemical zoning patterns.The diachroneity of Gt1 is ascribed to progressively earlier (compared to the structural development) cessation of overstepping of garnet-forming reactions before peak metamorphism in the higher nappes, resulting in earlier structural events being preserved.

Notes: Abstract Fluid inclusion studies of rocks from the late Archaean amphibolite-facies to granulite-facies transition zone of southern India provide support for the hypothesis that CO2,-rich H2O-poor fluids were a major factor in the origin of the high-grade terrain. Charnockites, closely associated leucogranites and quartzo-feldspathic veins contain vast numbers of large CO2-rich inclusions in planar arrays in quartz and feldspar, whereas amphibole-bearing gray gneisses of essentially the same compositions as adjacent charnockites in mixed-facies quarries contain no large fluid inclusions. Inclusions in the northernmost incipient charnockites, as at Kabbal, Karnataka, occasionally contain about 25 mol. % of immiscible H2O lining cavity walls, whereas inclusions from the charnockite massif terrane farther south do not have visibile H2OMicrothermometry of CO2 inclusions shows that miscible CH4 and N2 must be small, probably less than 10mol.%combined. Densities of CO2 increase steadily from north to south across the transitional terrane. Entrapment pressures calculated from the CO2 equation of state range from 5 kbar in the north to 7.5 kbar in the south at the mineralogically inferred average metamorphic temperature of 750°C, in quantitative agreement with mineralogic geobarometry. This agreement leads to the inference that the fluid inclusions were trapped at or near peak metamorphic conditions.Calculations on the stability of the charnockite assemblage biotite-orthopyroxene-K-feldspar-quartz show that an associated fluid phase must have less than 0.35 H2O activity at the inferred P and T conditions, which agrees with the petrographic observations. High TiO2 content of biotite stabilizes it to lower H2O activities, and the steady increase of biotite TiO2 southward in the area suggests progressive decrease of aH2O with increasing grade. Oxygen fugacities calculated from orthopyroxene-magnetite-quartz are considerably higher than the graphite CO2-O2 buffer, which explains the absence of graphite in the charnockites.The present study quantifies the nature of the vapours in the southern India granulite metamorphism. It remains to be determined whether CO2-flushing of the crust can, by itself, create large terranes of largeion lithophile-depleted granulites, or whether removal of H2O-bearing anatectic melts is essential.

Notes: Abstract There are discrete masses of un-deformed metabasite within the blueschist series of the island of Syros. Greece. Around the margins of these masses are zonal sequences through rocks showing intracrystalline deformation but without a geometric fabric, to rocks with discrete and anastomosing shear zones, and finally to penetratively foliated rocks with isolated relics of the original undeformed texture. Textural relics suggest that this spatial sequence is at least qualitatively also a temporal sequence.This progressive shear zone deformation took place concurrently with a glaucophane-epidote to eclogite reaction. The reaction pathways in the rocks that underwent the shear zone deformation can be compared with those in rocks of a similar composition that suffered a longer deformation history and show no relics of an undeformed parent. Although the final assemblages are in both cases the same, the pathways are different. These differences are in part related to reactions promoted by the change from local to bulk equilibrium on the onset of deformation in the rocks. They are also related to the crystallization and later breakdown during the sequence of progressive equilibration of a metastable phase, in this case an impure glaucophane.

Notes: Abstract The Rockley Volcanics from near Oberon, New South Wales occur within the aureole of the Carboniferous Bathurst Batholith and have been contact metamorphosed at P ∼ 100 ± 50MPa (10.5kbar) and a maximum T ∼ 565°C in the presence of a C–O–H fluid. Prior to contact metamorphism the volcanics were regionally metamorphosed and altered with the extensive development of actinolite, chlorite, plagioclase, quartz and calcite. The contact metamorphosed equivalents of these rocks have been subdivided into: Ca-poor (cordierite + gedrite), Mg-rich (amphibole + olivine + spinel), mafic (amphibole + plagioclase) and Ca-rich (amphibole + garnet + diopside; diopside + plagioclase; garnet + diopside + wollastonite) rocks.The chemistry of the minerals in the hornfelses was controlled by the bulk rock chemistry and fluid composition. Pargasites and hastingsites as well as an unusual phlogopite with blue green pleochroism, are found in Ca-rich hornfelses. A comparison of the assemblages with experimentally derived equilibria suggests that the fluid phase associated with the Ca-rich hornfelses was water-rich (Xco2= 0.1 to 0.3) while that associated with the Mg-rich hornfelses was enriched in CO2 (Xco2 〉 0.7). The different hornfels types have reacted to contact metamorphism independently in both their solid and fluid chemistries.

Notes: Abstract A garnet–hornblende Fe–Mg exchange geothermometer has been calibrated against the garnet–clinopyroxene geothermometer of Ellis & Green (1979) using data on coexisting garnet + hornblende + clinopyroxene in amphibolite and granulite facies metamorphic assemblages. Data for the Fe–Mg exchange reaction between garnet and hornblende have been fitted to the equation. In KD=Δ (XCa,g) where KD is the Fe–Mg distribution coefficient, using a robust regression approach, giving a thermometer of the form: with very satisfactory agreement between garnet–hornblende and garnet–clinopyroxene temperatures. The thermometer is applicable below about 850°C to rocks with Mn-poor garnet and common hornblende of widely varying chemistry metamorphosed at low aO2.Application of the garnet–hornblende geothermometer to Dalradian garnet amphibolites gives temperatures in good agreement with those predicted by pelite petrogenetic grids, ranging from 520°C for the lower garnet zone to 565–610°C for the staurolite to kyanite zones. These results suggest that systematic errors introduced by closure temperature problems in the application of the garnet–clinopyroxene geothermometer to the ‘calibration’data set are not serious. Application to ‘eclogitic’garnet amphibolites suggests that garnet and hornblende seldom attain Fe–Mg exchange equilibrium in these rocks.Quartzo-feldspathic and mafic schists of the Pelona Schist on Sierra Pelona, Southern California, were metamorphosed under high pressure greenschist, epidote–amphibolite and (oligoclase) amphibolite facies beneath the Vincent Thrust at pressures deduced to be 10±1 kbar using the phengite geobarometer, and 8–9kbar using the jadeite content of clinopyroxene in equilibrium with oligoclase and quartz. Application of the garnet–hornblende thermometer gives temperatures ranging from about 480°C at the garnet isograd through 570°C at the oligoclase isograd to a maximum of 620–650°C near the thrust. Inverted thermal gradients beneath the Vincent Thrust were in the range 170 to 250°C per km close to the thrust.

Notes: Abstract Rock fracture enhances permeability and provides pathways through which fluids migrate. During contact metamorphism, fluids contained in isolated pores and fractures expand in response to temperature increases caused by the dissipation of heat from magmas. Heat transport calculations and thermomechanical properties of water-rich fluids demonstrate (1) that thermal energy is a viable mechanism to produce and maintain pore fluid pressure (Pf) in a contact metamorphic aureole; (2) that the magnitude of Pf generated is sufficient to propagate fractures during the prograde thermal history (cause hydrofracture) and enhance permeability; and (3) that Pf-driven fracture propagation is episodic with time-scales ranging from years to thousands of years. Because Pf dissipation is orders of magnitude faster than P, f buildup, Pf oscillations and cyclical behaviour are generated as thermal heating continues. The Pf cycle amplitude depends on the initial fracture length, geometry and the rock's resistance to failure whereas the frequency of fracture depends on the rate of heating. Consequently, oscillation frequency also varies spatially with distance from the heat source.Time series of fluid pressures caused by this process suggest that cyclical fracture events are restricted to an early time period of the prograde thermal event near the intrusive contact. In the far field, however, individual fracture events have a lower frequency but continue to occur over a longer time interval. Numerous fracture cycles are possible within a single thermal event. This provides a provisional explanation for multiple generations of veins observed in outcrop. P f cycling and oscillations may explain several petrological features. If pore fluids are trapped at various positions along a pressure cycle, the large amplitude of Pf variations for small fractures may account for different pressures recorded by fluid inclusions analysed from a single sample. Pf oscillations, during a single thermal episode, also drive chemical reactions which can produce complex mineral textures and assemblages for discontinuous reactions and/or zoning patterns for continuous reactions. These can mimic polymetamorphic or disequilibrium features.Temporal aspects of fracture propagation and permeability enhancement also constrain the likely timing of fluid flow and fluid-mineral interactions. These data suggest that fluid flow and fluid-mineral reactions are likely to be restricted to an early period in the prograde thermal history, characterized by high Pf coincident with relatively high temperatures, fracture propagation and consequent increases in permeability. This early prograde hydration event is followed by diffusional peak metamorphic reactions. This relationship is evident in the complex mineralogical textures common in some metamorphosed rocks.

Notes: Abstract Andalusite-bearing veins formed during contact metamorphism in the aureole of the Vedrette di Ries tonalite. In the veins, quartz crystals that are completely armoured by andalusite or that occur in strain shadow areas contain three generations of fluid inclusions: low-salinity H2O-CO2-CH4 mixtures with CH4/(CO2+ CH4) ± 0.35 (type A); low-salinity aqueous fluids (type B); H2O-free, CO2-CH4 fluids with the same carbonic speciation as A (type C). Carbonic types A and C typically have a dark appearance, which is attributed to graphite coatings on inclusion walls. Microstructural analysis of the host quartz and calculated densities indicate that type A inclusions were likely trapped during vein formation. These inclusions underwent strain-assisted re-equilibration during cooling that resulted in density increases without change of composition. After the rocks had cooled below about 350 ° C, type C inclusions appear to have formed from one of the immiscible fractions after unmixing of the H2O-CO2-CH4 fluid mixtures. Aqueous type B inclusions, apparently trapped between 225 and 350 ° C, could represent an independent fluid, or could be the H2O-rich fraction of unmixed type A fluids. Taking account of the uncertainties, the composition and density of the complex type A inclusion fluids are in good agreement with the properties of primary fluids calculated from the petrological data. The fluid inclusion data support the model of vein formation by hydrofracturing as a result of dehydration of graphitic metapelites. These new results also demonstrate the importance of considering strain in the interpretation of metamorphic fluid inclusions.

Notes: Abstract Aqueous fluid released in metamorphism is transported upwards from depth to the Earth's surface. I propose a hydrofracturing model for the fluid transport. In the model, fluid is transported by the upward propagation of a two-dimensional vertical fluid-filled crack from a fluid reservoir (e.g. overpressured compartment under a seal) at depth to the Earth's surface; fluid is injected consecutively from the reservoir into the crack at a given (but not necessarily constant) injection rate; some of the injected fluid is lost by infiltration from the crack walls into the surrounding permeable rock. An approximate solution of the crack propagation is obtained using fluid dynamics for turbulent film flow and linear elastic fracture mechanics. The solution shows the transition from a regime in which the excess pressure of the fluid in the reservoir drives the propagation to a regime in which the buoyancy of the fluid in the crack drives the propagation. For example, if the net injection rate of H2O is 1 m2/s, the regime transition occurs when the vertical crack length becomes 280 m; after the transition, the propagation velocity and average aperture are constant: 21 m/s and 4.8 cm. If the injection rate is lower than a critical value, hydrofracturing cannot be an effective mode for the fluid transport because of the significant fluid loss by infiltration from the crack walls into the surrounding permeable rock. Assuming a fluid-saturated crust with hydrostatic pore fluid pressure, a lower limit can be estimated for the injection rate required to transport H2O by hydrofracturing without significant fluid loss. For example, the lower limit for transport from a depth of 15 km to the Earth's surface is estimated at 0.2 m2/s if the crustal permeability is 10-17 m2. The lower limit decreases with decreasing crustal permeability.

Notes: Abstract Microstructural and chemical analysis of plagioclase in 20 superficially similar amphibolite facies ductile shear zones in metagabbors and amphibolites of the Ivrea Zone in Italy reveals significant differences in An and Ba contents. Plagioclase, which was deformed at P-T conditions lower than those of the wall rocks, occurs in the following four different microstructural situations with different chemical compositions: (i) relatively undeformed porphyroclasts, (ii) dynamically recrystallized grains and subgrains rimming the porphyroclasts, (iii) infill of microcracks cross-cutting the porphyroclasts and (iv) fine-grained recrystallized grains in the matrix of the shear zones. The differences in the An and Ba contents are caused by partial chemical equilibration of plagioclase in the shear zones during and partly after deformation. Changes in An and Ba contents were caused by fluid-assisted grain-boundary migration recrystallization, as well as by solid-state diffusion, while fluid activity was high. The relation between the composition and microstructures of the plagioclase in the shear zones indicates that in the different shear zones, fluids ceased to be active during different stages in the late shear zone deformation history.The interpretation of the variations in composition and microstructures reveals that only grains that developed by grain-boundary migration recrystallization and that are not adjacent to porphyroclasts reflect P-T conditions during the dominant shear-zone deformation.

Notes: Abstract TEM and XRD techniques were used to study crystal growth characteristics of the fabric-forming phyllosilicates which developed in response to low-grade metamorphism and tectonic imbrication in part of the Southern Uplands thrust terrane. Prograde regional metamorphism, ranging from late diagenesis through the anchizone to the epizone, was accompanied by the development of a slaty cleavage which is commonly bedding-parallel. TEM-measured mean thicknesses of white mica and chlorite crystallite populations increase with advancing grade and correlate with XRD-measured crystallinity indices. Analytical TEM data show that prograde changes in composition lead to a net loss of Si, Ca and minor Fe from the fabric-forming phyllosilicates. White micas are paragonite-poor phengites with a mean b lattice parameter of 9.037 Å, and indicate an intermediate pressure series of metamorphism with a field gradient of 〈25° C km-1. Chlorite compositions evolved from diabantite (with intergrown corrensite) to ripidolite over an estimated temperature range of 150–320° C. Field gradient and temperature estimates suggest that crystal growth and fabric development occurred at burial depths ranging from 6 km to at least 13 km in the thrust terrane. During late diagenesis, crystal growth of white mica and chlorite was predominantly a consequence of polytypic and phase transitions, and resulted in similar size distributions which resemble typical Ostwald ripening curves. Under anchizonal and epizonal conditions, white mica grew more rapidly than chlorite because of its greater ability to store strain energy and recover from subgrain development; as a result crystal thickness distributions are not typical of Ostwald ripening. In contrast, chlorite crystals which grew under these conditions developed subgrain boundaries at high strain rates which were only partially recovered at low strain rates; these retained dislocations reduce the crystallite thicknesses detected by TEM and XRD, compared with those of white mica. These differences in strain-induced crystal growth indicate that white mica (illite) and chlorite crystallinity indices are likely to show significant differences where low-grade metamorphism is closely associated with tectonic fabric development.

Notes: Abstract The metamorphic history of the Archaean Superior Province crystalline basement in the Palaeoproterozoic Ungava Orogen attests to the importance of structural and geohydrological controls on a retrograde amphibolite-granulite transition. Two distinct metamorphic suites, separated in age by nearly one billion years, are recognized in extensively exposed tonalitic to dioritic metaplutonic gneisses. The older suite comprises c. 2.7-Ga granulite facies assemblages (orthopyroxene-clinopyroxene-hornblende-plagioclase-ilmenite ± biotite ± quartz) that record moderate pressures (±5 kbar) and high temperatures (±800° C). A younger, c. 1.8-Ga suite resulted from amphibolitization of the granulites and is characterized by regionally extensive amphibolite facies mineral zones that broadly parallel the basal décollement of the overlying Proterozoic Cape Smith Thrust Belt. Deformation/mineral growth relationships in the amphibolitized basement indicate that extensive hydration and re-equilibration of the Archaean granulites occurred during thrust belt deformation. The transition from granulite facies to amphibolite facies assemblages is characterized by the growth of garnet-hornblende-quartz ° Cummingtonite coronas between plagioclase and orthopyroxene-clinopyroxene, as well as titanite coronas on ilmenite. Multi-equilibrium thermobarometry on the coronitic assemblages documents re-equilibration of the granulitic gneiss to 7.7 kbar at 644° C in the south and 9.8 kbar at 700° C in the north. The variably deformed, amphibolite facies domain sandwiched between the coronitic garnet zone and the basal décollement is marked by significant metasomatic changes in major element concentrations within tonalite. These changes are compatible with equilibrium flow of an aqueous-chloride fluid down a temperature gradient. The source of fluids for basement hydration/metasomatism is interpreted to be dehydrating clastic rocks in the overlying thrust belt, with fluid flow probably focused along the basal décollement.

Notes: Sapphirine occurs in a 3-5 m wide zone between amphibole-lherzolite and garnetiferous metagabbro at Finero in the Ivrea Zone, NW Italian Alps. Layers consisting of plag + hb + sa + cpx + opx + sp + gt are interbanded with spinel pyroxenites, which may contain sapphirine replacing spinel. All minerals are very magnesian, with XMg between 0.78 and 0.92. Bulk rock analyses suggest that precursors to the sapphirine-bearing rocks were igneous cumulates of plagioclase + olivine + hornblende + spinel. Up to 16wt% CaO does not inhibit sapphirine formation and it is the unusually Mg-rich nature of the host rocks which allows sapphirine development. The early igneous assemblage was replaced by one of cpx + sa + hb +± plag at a pressure of 9 ± 1 kbar and temperatures of 900 ± 50°C. Subsequent rapid uplift caused the instability of gt, gt + hb, hb and sa + cpx to form opx + plag ± sp ± sa symplectites.

Notes: The Gran Paradiso basement complex of the French and Italian Alps is composed of metasediments, termed the gneiss minuti, and metabasic rocks, both of which are intruded by a late Hercynian granite. The Bonneval gneiss, which crops out at the western edge of the complex, is composed of highly deformed metasediments, volcanics and volcaniclastic rocks. Eclogites, now highly altered, occur in the metabasic rocks. Kyanite and blue-green amphibole are locally present in the gneiss minuti and aegirine plus riebeckite occur in the Bonneval gneiss. A moderately high pressure - low temperature metamorphic event of probable Alpine age occurred in the basement complex. This metamorphic event differs from that in the overlying Sesia unit and ophiolites of the Schistes lustrés nappe in being at lower pressures (below the ab = jd100+ qz transition) and post-dating the major (D2A) deformation. The origin of the metamorphism is discussed and interpreted as a probable consequence of the overlying nappe pile which was emplaced during the D2A event. Subsequent greenschist facies metamorphism in the basement complex is a consequence of thermal relaxation during uplift.

Notes: Abstract. A method for the quantitative analysis of the spatial relations of minerals is described. Dispersed distributions are formed by annealing and destroyed in post-tectonic migmatization. Aggregate distributions characterize solid-state differentiation, whereas leucosomes formed in systems of high fluid:rock ratio (in the examples studied, anatectic melts) show random distributions.Quantitative textural analysis can be used to indicate whether migmatization was post-tectonic or earlier, though caution is necessary if post-migmatite cooling is slow or if there is some minor deformation. More importantly, it can be used to discriminate melt-present from melt-absent leucosomes; this is exemplified by a suite of metamorphic and anatectic migmatites from the Scottish Caledonides.The textural evolution of anatexites with increasing melt percentage is traced. Initial feldspar porphyroblastesis occurs by Ostwald ripening via grain boundary melts; subsequently ophthalmites develop with fabrics and chemistry inherited from the palaeosome. At greater than 30% melt these inherited fabrics are wholly destroyed. Deformation prompts segregation into melanosome and leucosome; resultant leucosomes contain no inherited crystals. The scale of anatectic systems is fixed at the point at which segregation begins; ophthalmites provide evidence for melt and crystal transfer beyond original palaeosome boundaries. In contrast, metamorphic migmatites are necessarily small-scale systems because of diffusive constraints, and melanosomes are invariably produced.

Notes: The oligoclase-biotite zone of the Bessi area, central Shikoku is characterized by sodic plagioclase (XCa= 0.10–0.28)-bearing assemblages in pelitic schists, and represents the highest-grade zone of the Sanbagawa metamorphic terrain. Mineral assemblages in pelitic schists of this zone, all with quartz, sodic plagioclase, muscovite and clinozoisite (or zoisite), are garnet + biotite + chlorite + paragonite, garnet + biotite + hornblende + chlorite, and partial assemblages of these two types. Correlations between mineral compositions, mineral assemblages and mineral stability data assuming PH2O = Psolid suggests that metamorphic conditions of this zone are about 610 ± 25°C and 10 ± 1 kbar.Based upon a comparative study of mineralogy and chemistry of pelitic schists in the oligoclase-biotite zone of the Sanbagawa terrain with those in the New Caledonia omphacite zone as an example of a typical high-pressure type of metamorphic belt and with those in a generalized‘upper staurolite zone’as an example of a medium-pressure type of metamorphic belt, progressive assemblages within these three zones can be related by reactions such as:

Notes: An assemblage consisting of corundum, sapphirine, spinel, cordierite, garnet, biotite and bronzite is described from the Messina area of the Limpopo Mobile Belt, and consideration given to its petrogenesis. Various geothermometers and geobarometers have been applied in an attempt to determine the temperatures and pressures of metamorphism.A former coexistence of garnet and corundum is suggested to have developed during the earliest high pressure phase of the metamorphism, where temperatures exceeded 800°C and pressures as high as 10kbar may have been experienced. Subsequently, continuous retrograding reactions from medium pressure granulite facies at about 800°C and 8kbar towards amphibolite facies generated spinel, cordierite, sapphirine and possibly also bronzite. The most notable reaction was probably of the form: garnet + corundum = cordierite + sapphirine + spinel.

Notes: A review of currently available information relevant to the Basal Gneiss Complex (BGC) of Western South Norway, combined with the authors’own observations, leads to the following conclusions.1. Most of the BGC consists of Proterozoic crystalline rocks and probably subordinate Lower Palaeozoic cover.2. The last major deformation of these rocks was during the Caledonian orogeny and involved large-scale thrusting, recumbent folding and doming. The structural development of the BGC is closely tied in with that of the Caledonian allochthon.3. The whole eclogite-bearing part of the BGC has suffered a high pressure metamorphism with conditions of between 550°C, 12.5 kbar (Sunnfjord) and about 750°C, 20 kbar (Møre og Romsdal) at the metamorphic climax.4. This metamorphism was of Caledonian age, probably rather early in the Caledonian tectonic history of the BGC and is considered to have been a rather transient event.By setting these conclusions in a framework provided by geophysical evidence for the deep structure of the crust in southern Norway we have constructed a geotectonic model to explain the recorded metamorphic history of the BGC. It is suggested that considerable crustal thickening was caused by imbrication of the Baltic plate margin during continental collision with the Greenland plate. This resulted in high pressure metamorphism in the resulting nappe stack. Progradation of the suture caused underthrusting of the Baltic foreland below the eclogite-bearing terrain causing it to emerge at the Earth's surface, aided by tectonic stripping and erosion.Application of isostacy equations to the model shows that eclogites can be formed by in-situ metamorphism in crustal rocks and reappear at the land surface above a normal thickness of crust in a single orogenic episode of approximately 65-70 Ma duration.

Notes: Detailed geochronological, structural and petrological studies reveal that the geological evolution of the Field Islands area, East Antarctica, was substantially similar to that of the adjacent Archaean Napier Complex, though with notable differences in late and post Archaean times. These differences reflect the area's proximity to the Proterozoic Rayner Complex and consequent vulnerability to tectonic process involved in the formation of the latter. Distinctive structural features of the Field Islands are (1) consistent development of a discordant, pervasive S3 axial-plane foliation; (2) re-orientation of S3 axial planes to approximate to the subsequent E-W tectonic trend of the nearby Rayner Complex; (3) selective retrogression by a post-D3 static thermal overprint; and (4) relatively common development of retrogressive, E-W-trending, mylonitic shear zones.Peak metamorphic conditions in excess of 800°C at 900 ± 100 M Pa (9 kbar) were attained at one locality following, but probably close to the time of D2 folding. D3 took place in late Archaean times when metamorphic temperatures were about 650°C and pressures were about 600 MPa (6 kbar). Later, temperatures of 600 ± 50°C and pressures of 700 MPa (7kbar) were attained in an amphibolite-facies event, presumably associated with the widespread granulite to amphibolite-facies metamorphism and intense deformation involved in the formation of the Rayner Complex at about 1100 Ma. The area was subsequently subjected to near-isothermal uplift.Rb-Sr isotopic data indicate that the pervasive D3 fabric developed at about 2400–2500 Ma, and this age can be further refined to 2456+8-5 Ma by concordant zircon analyses from a syn-D3 pegmatite. All zircons were affected by only minor (〈7–10%) Pb loss and/or new zircon growth during the Rayner event at about 1100Ma. Thus the 450–850 μg/gU concentrations of these zircons were too low to cause sufficient lattice damage over the 1350 Ma (from 2450 Ma) for excessive Pb to be lost during the 1100 Ma event. The emplacement of pegmatite at 522 ± 10 Ma substantially changed the Rb-Sr systematics of the only analysed rock that developed a penetrative fabric during the 1100 Ma event. Monazite in this pegmatite contains an inherited Pb component, which probably resides in small opaque inclusions.A good correlation is found between Rb-Sr total-rock ages and rock fabric. U-Pb zircon intercepts with concordia also mostly correspond to known events. However, in one example a near perfect alignment of zircon analyses, probably developed by mixing of unrelated components, produced concordia intercepts that appear to have no direct geochronological significance.

Notes: Cool smoke treatments were applied to unmined Eucalyptus marginata (jarrah) forest soils, rehabilitated bauxite mine soils, and broadcast seed to determine if enhancement in germination could be effected with a view toward maximizng the establishment of species in bauxite mines in Western Australia.Forest sites showed a 48-fold increase in total germinants from the soil seed bank when treated with aerosol smoke. Newly returned bauxite mine soils showed a greater than threefold increase in total germinants after the same treatment. There were also significant increases in the number of species germinating in response to the aerosol smoke treatment in both the forest and the mined soils. Similarly, application of smoked water to the soil seed bank in previously mined sites elicited a significant positive germination response, increasing total germinants and species numbers by 56 and 33%, respectively.Treatment of mixed seed lots with aerosol smoke before broadcast resulted in highly significant improvement in germination when compared to untreated seed. Both total number of germinants, and number of species emerging from mined sites were positively influenced (85% and 34% increases, respectively).Ten target species were used to determine the relative effectiveness of different methods of smoke treatment on the germination of broadcast seed. Nine of the species involved displayed a promotive effect with at least two of the treatments. Generally, however, aerosol smoking of seed before broadcast proved to be the more effective approach. As a result of these findings, all broadcast seed for use in Alcoa's bauxite mined areas in the southwest of Western Australia is now routinely smoke treated before application.

Notes: Understanding Cladium jamaicense (sawgrass) seedling establishment is an important component of an Everglades restoration program because the degree of sawgrass recovery and concurrent Typha domingensis (cattail) decline will be used to evaluate restoration success. To understand sawgrass recovery at locations with increased soil nutrients, we tested the effects of transplanting sawgrass seedlings to pots at different densities and investigated how nutrient additions affect seedling growth. Survivorship of seedlings transplanted into moist commercial potting soil at three densities ranged from 61% to 95%. After 6 months, maximum survivorship (90%) occurred at medium densities (2–4 seedlings per pot 16 cm in diameter). Nutrient additions, totaling 6.5 N g/m2, 9.8 P g/m2, 6.5 g/m2, were applied approximately 4 months after seedlings were transplanted. The biomass of the plants receiving nutrient additions (pulsed) was significantly higher (by over 30%) than plants with no nutrient addition (control). Photosynthetic rates for nutrient-enriched plants (measured 6-weeks after the nutrient additions) were significantly greater (by 32–45%) than for control plants. Instantaneous leaf water use efficiency increased significantly (by more than 20%) in pulsed plants. The results suggest that preventing root damage is crucial for the success of trans planted sawgrass seedlings and that nutrient additions enhanced seedling growth.

Notes: I evaluated responses by 16 native woody species to differential soil compaction and density of ground cover. The trees and shrubs studied represent sites in southern Illinois that commonly have restrictions to root growth from soil or drainage conditions. The study site was a restored surface coal mine in southern Illinois with a rooting medium compacted by grading and a dense ground cover of pasture species. Soil compaction was alleviated in half the study area before tree planting by mechanically ripping the soil to a depth of 1.2 m. Roots of half the trees and shrubs were dipped in a Terra® slurry before planting, and the ground cover around all planting spots was afterwards sprayed with herbicide. In year 2 after planting the ground cover in half of the unripped and half of the ripped area was further controlled by repeated application of herbicides. Ripping significantly increased height growth of all trees combined and all species individually in each year of the study. Second-year control of ground cover increased height growth of all trees combined and of seven species individually. Some species were damaged by herbicides. Terra® had little evident effect on species performance. Animal damage reduced early survival and growth, especially of Acer (maple) and Cornus (dogwood) species, and later growth of Quercus rubra (red oak). Removal of ground cover with herbicides tended to increase deer browse. Soil ripping, herbicide application, and choosing tree species unattractive to deer can be recommended to increase success in planting trees for forest restoration.

Notes: Woodlands dominated by Eucalyptus spp. in temperate southeastern and southwestern Australia have been extensively cleared for agriculture and are often badly degraded by livestock grazing. This has resulted in the loss of biodiversity and widespread land degradation. The continuing decline of these woodlands has become a concern for the conservation of biodiversity, and there is a growing interest among farmers, land managers, and researchers in developing techniques for restoring them. Currently few scientific guidelines exist for undertaking woodland restoration programs. We use a state and transition model to develop hypotheses on restoration strategies for salmon gum (Eucalyptus salmonophloia) woodlands. We consider that this approach provides a suitable framework for organizing knowledge and identifying areas where further information is needed, and hence provides a useful starting point for a restoration program. The model has the potential to provide a tool for land managers with which they can assess the action and effort needed to undertake woodland restoration in agricultural landscapes.

Notes: Most of the world's forest has been cleared, cultivated, and then often abandoned. In many instances these areas have changed to successionally arrested grasslands, shrublands, or fernlands maintained by frequent fires and high herbivore populations. Many studies have shown that various herbaceous, nitrogen-fixing legumes can protect soil surfaces, retain soil moisture, improve soil fertility, and retard ground fires. Our objective was to ascertain if some of these species can potentially inhibit herbivory and satisfactorily establish in these arrested grassland areas to serve as sites for reforestation. We evaluated the potential for four species of nitrogen-fixing legumes (Calapogonium mucunoides, Centrosema pubescens, Desmodium ovalifolium, and Pueraria phaseoloides) to establish on exposed soil within successionally arrested grasslands of Panicum maximum and Cymbopogon nardus in the central hills of Sri Lanka. Four different sites within rectangular grassland areas were cleared of graminoids and sown with seed of each legume. Half of each clearing was protected from browsing rabbits and porcupines, and half was not protected. After 6 months, certain plots were destructively sampled to determine dry biomass gain for each species and treatment. Analyses of variance were performed to test for differences among sites, treatments, and species. All three factors revealed differences, indicating that species must be matched to site. On sites with high amounts of herbivory, D. ovalifolium had the greatest dry biomass gain after 6 months of growth, possibly because of its relatively low nitrogen and moisture content. Where herbivory was absent, P. phaseoloides and C. muconoides had the greatest dry biomass gain. Dry biomass gain of all four legume ground covers was low on sites with lowest pH and nutrient concentrations. Under conditions of low relative fertility and low pH, establishment of the tested legumes failed. Though soil moisture availability was not measured, we speculate that these low fertility sites were also prone to drought. Findings support the site-specific establishment of legume species for purposes of reforestation and watershed protection in central Sri Lanka. This work is applicable to other regions particularly dominated by successionally arrested grasslands with similar circumstances in other parts of south and southeast Asia.