ALBERT

Beschreibung: Quantification of biophysical parameters of urban trees is important for urban planning, and for assessing carbon sequestration and ecosystem services. Airborne lidar has been used extensively in recent years to estimate biophysical parameters of trees in forested ecosystems. However, similar studies are largely lacking for individual trees in urban landscapes. Prediction models to estimate biophysical parameters such as height, crown area, diameter at breast height, and biomass for over two thousand individual trees were developed using best subsets multiple linear regression for a study area in central Oklahoma, USA using point cloud distributional metrics from an Optech ALTM 2050 lidar system. A high level of accuracy was attained for estimating individual tree height (R2 = 0.89), dbh (R2 = 0.82), crown diameter (R2 = 0.90), and biomass (R2 = 0.67) using lidar-based metrics for pooled data of all tree species. More variance was explained in species-specific estimates of biomass (R2 = 0.68 for Juniperus virginiana to 0.84 for Ulmus parviflora) than in estimates from broadleaf deciduous (R2 = 0.63) and coniferous (R2 = 0.45) taxonomic groups—or the data set analysed as a whole (R2 = 0.67). The metric crown area performed particularly well for most of the species-specific biomass equations, which suggests that tree crowns should be delineated accurately, whether manually or using automatic individual tree detection algorithms, to obtain a good estimation of biomass using lidar-based metrics.

Beschreibung: In this paper we present a visual analytics approach for deriving spatio-temporal patterns of collective human mobility from a vast mobile network traffic data set. More than 88 million movements between pairs of radio cells—so-called handovers—served as a proxy for more than two months of mobility within four urban test areas in Northern Italy. In contrast to previous work, our approach relies entirely on visualization and mapping techniques, implemented in several software applications. We purposefully avoid statistical or probabilistic modeling and, nonetheless, reveal characteristic and exceptional mobility patterns. The results show, for example, surprising similarities and symmetries amongst the total mobility and people flows between the test areas. Moreover, the exceptional patterns detected can be associated to real-world events such as soccer matches. We conclude that the visual analytics approach presented can shed new light on large-scale collective urban mobility behavior and thus helps to better understand the “pulse” of dynamic urban systems.

Beschreibung: A planning support system for land consolidation has been developed that has, at its heart, an expert system called LandSpaCES (Land Spatial Consolidation Expert System) which contains a “design module” that generates alternative land redistributions under different scenarios and an “evaluation module” which integrates GIS with multi-criteria decision making for assessing these alternatives. This paper introduces the structural framework of the latter module which has been applied using a case study in Cyprus. Two new indices are introduced: the “parcel concentration coefficient” for measuring the dispersion of parcels; and the “landowner satisfaction rate” for predicting the acceptance of the land redistribution plan by the landowners in terms of the location of their new parcels. These two indices are used as criteria for the evaluation of the land redistribution alternatives and are transferable to any land consolidation project. Moreover, a modified version of the ratio estimation procedure, referred to as the “qualitative rating method” for assigning weights to the evaluation criteria, is presented, along with a set of non-linear value functions for standardizing the performance scores of the alternatives and incorporating expert knowledge for five evaluation criteria. The application of the module showed that it is a powerful new tool for the evaluation of alternative land redistribution plans that could be implemented in other countries after appropriate adjustments. A broader contribution has also been made to spatial planning processes, which might follow the methodology and innovations presented in this paper.

Beschreibung: Existing models of spatial relations do not consider that different concepts exist on different levels in a hierarchy and in turn that the spatial relations in a given scene are a function of the specific concepts considered. One approach to determining the existence of a particular spatial relation is to compute the corresponding high level concepts explicitly using map generalization before inferring the existence of the spatial relation in question. We explore this idea through the development of a model of the spatial relation “enters” that may exist between a road and a housing estate.

Beschreibung: Reflectance spectra of carbonate minerals in the shortwave infrared (SWIR) and thermal infrared (TIR) wavelength regions contain a number of diagnostic absorption features. The shape of these features depends on various physical and chemical parameters. To accurately identify carbonate minerals or rocks in pure and mixed form, it is necessary to analyze the effects of the parameters on spectral characteristics. In this study, we analyzed spectral absorption feature characteristics of calcite and dolomite in the SWIR (features at 2.3 and 2.5 μm) and TIR (features at 11.5 and 14 μm) wavelength regions, as a function of grain size and carbonate mineral mixtures. Results showed that varying grain sizes and mineral contents in the sample, influence reflectance values and absorption feature characteristics. Absorption band positions of pure and mixed calcite and dolomite in the SWIR and TIR regions for both features were displaced slightly as observed in previous studies. The band positions of calcite and dolomite varied relative to grain size only in the TIR region. These positions shifted to longer wavelengths for the feature at 11.5 μm and to shorter wavelengths for the feature at 14 μm from fine to coarse grain size. The band positions of calcite-dolomite mixtures in the SWIR and TIR regions were determined by the quantity of calcite and dolomite in the sample. These results can be applied for the identification of pure and mixed calcite and dolomite, as well as estimating the relative abundance of both minerals with different grain size and mineral mixtures in a synthetic sample or rock. They can also be used as a preliminary proxy for assessing dolomitization patterns in carbonate rocks.

Beschreibung: Crowdsourced geodata has been proven to be a rich and major data source for environmental simulations and analysis, as well as the visualization of spatial phenomena. With the increasing size and complexity of public buildings, such as universities or hotels, there is also an increasing demand for information about indoor spaces. Trying to stimulate this growing demand, both researchers and Volunteered Geographic Information (VGI) communities envision to extend established communities towards indoors. It has already been showcased that VGI from OpenStreetMap (OSM) can be utilized for different applications in Spatial Data Infrastructures (SDIs) as well as for simple shortest path computations inside buildings. The here presented research now tries to utilize crowdsourced indoor geodata for more complex indoor routing scenarios of multiple users. Essentially, it will be investigated if, and to what extent, the available data can be utilized for performing indoor evacuation simulations with the simulation framework MATSim. That is, this paper investigates the suitability of crowdsourced indoor information from OSM (IndoorOSM) for evacuation simulations. Additionally, the applicability of MATSim for agent-based indoor evacuation simulations is conducted. The paper discusses the automatic generation simulation-related data, and provides experimental results for two different evacuation scenarios. Furthermore, limitations of the IndoorOSM data and the MATSim framework for indoor evacuation simulations are elaborated and discussed.

Beschreibung: This paper explores the patterns of human activities within a geographical space by adopting the taxicab static points which refer to the locations with zero speed along the tracking trajectory. We report the findings from both aggregated and individual aspects. Results from the aggregated level indicate the following: (1) Human activities exhibit an obvious regularity in time, for example, there is a burst of activity during weekend nights and a lull during the week. (2) They show a remarkable spatial drifting pattern, which strengthens our understanding of the activities in any given place. (3) Activities are heterogeneous in space irrespective of their drifting with time. These aggregated results not only help in city planning, but also facilitate traffic control and management. On the other hand, investigations on an individual level suggest that (4) activities witnessed by one taxicab will have different temporal regularity to another, and (5) each regularity implies a high level of prediction with low entropy by applying the Lempel-Ziv algorithm.

Beschreibung: Several tasks in urban and architectural design are today undertaken in a geospatial context. Building Information Models (BIM) and geospatial technologies offer 3D data models that provide information about buildings and the surrounding environment. The Industry Foundation Classes (IFC) and CityGML are today the two most prominent semantic models for representation of BIM and geospatial models respectively. CityGML has emerged as a standard for modeling city models while IFC has been developed as a reference model for building objects and sites. Current CAD and geospatial software provide tools that allow the conversion of information from one format to the other. These tools are however fairly limited in their capabilities, often resulting in data and information losses in the transformations. This paper describes a new approach for data integration based on a unified building model (UBM) which encapsulates both the CityGML and IFC models, thus avoiding translations between the models and loss of information. To build the UBM, all classes and related concepts were initially collected from both models, overlapping concepts were merged, new objects were created to ensure the capturing of both indoor and outdoor objects, and finally, spatial relationships between the objects were redefined. Unified Modeling Language (UML) notations were used for representing its objects and relationships between them. There are two use-case scenarios, both set in a hospital: “evacuation” and “allocating spaces for patient wards” were developed to validate and test the proposed UBM data model. Based on these two scenarios, four validation queries were defined in order to validate the appropriateness of the proposed unified building model. It has been validated, through the case scenarios and four queries, that the UBM being developed is able to integrate CityGML data as well as IFC data in an apparently seamless way. Constraints and enrichment functions are used for populating empty database tables and fields. The motivation scenarios also show the needs and benefits of having an integrated approach to the modeling of indoor and outdoor spatial features.

Beschreibung: In Brazil, plantations of exotic species such as Eucalyptus have expanded substantially in recent years, due in large part to the great demand for cellulose and wood. The combination of the steep slopes in some of these regions, such as the municipalities located close to the Serra do Mar and Serra da Mantiqueira, and the soil exposure that occurs in some stages in the Eucalyptus cultivation cycle, can cause landslides. The use of a geographic information system (GIS) assists with the identification of areas that are susceptible to landslides, and one of the GIS tools used is the spatial inference technique. In this work, the landslide susceptibility of areas occupied by Eucalyptus plantations in different stages of development in municipalities in the state of São Paulo was examined. Eight thematic maps were used, and, the fuzzy gamma technique was used for data integration and the generation of susceptibility maps, in which scenarios were created with different gamma values for the dry and rainy seasons. The results for areas planted with Eucalyptus were compared with those obtained for other land uses and covers. In the moderate and high susceptibility classes, the pasture is the land use type that presented the greatest susceptibility, followed by new Eucalyptus plantations and urban areas.

Beschreibung: Given high urbanization rates and increasing spatio-temporal variability in many present-day cities, exposure information is often out-of-date, highly aggregated or spatially fragmented, increasing the uncertainties associated with seismic risk assessments. This work therefore aims at using space-based technologies to estimate, complement and extend exposure data at multiple scales, over large areas and at a comparatively low cost for the case of the city of Bishkek, Kyrgyzstan. At a neighborhood scale, an analysis of urban structures using medium-resolution optical satellite images is performed. Applying image classification and change-detection analysis to a time-series of Landsat images, the urban environment can be delineated into areas of relatively homogeneous urban structure types, which can provide a first estimate of an exposed building stock (e.g., approximate age of structures, composition and distribution of predominant building types). At a building-by-building scale, a more detailed analysis of the exposed building stock is carried out using a high-resolution Quickbird image. Furthermore, the multi-resolution datasets are combined with census data to disaggregate population statistics. The tools used within this study are being developed on a free- and open-source basis and aim at being transparent, usable and transferable.

Beschreibung: In this paper experimental comparisons between two Time-of-Flight (ToF) cameras are reported in order to test their performance and to give some procedures for testing data delivered by this kind of technology. In particular, the SR-4000 camera by Mesa Imaging AG and the CamCube3.0 by PMD Technologies have been evaluated since they have good performances and are well known to researchers dealing with Time-of-Flight (ToF) cameras. After a brief overview of commercial ToF cameras available on the market and the main specifications of the tested devices, two topics are presented in this paper. First, the influence of camera warm-up on distance measurement is analyzed: a warm-up of 40 minutes is suggested to obtain the measurement stability, especially in the case of the CamCube3.0 camera, that exhibits distance measurement variations of several centimeters. Secondly, the variation of distance measurement precision variation over integration time is presented: distance measurement precisions of some millimeters are obtained in both cases. Finally, a comparison between the two cameras based on the experiments and some information about future work on evaluation of sunlight influence on distance measurements are reported.

Beschreibung: The “land use” concept has evolved during recent decades and it is now considered as the socioeconomic function of land. Land use representation and land use change assessment through remote sensing still remains one of the major challenges for the remote sensing scientific community. In this paper we present a methodological approach based on remote sensing techniques to assess land use in accordance with the requirements of the United Nations Framework Climate Change Convention, UNFCCC (1995). The methodology is based mainly on the recognition of the land key elements and their function and on the adoption of the “predominant land use” criteria in the classification scheme settled by rules. The concept that underpins these rules is that the land use function of land can be expressed through hierarchical relationships among key land elements, and that these functional relationships are based on thresholds reflecting the relevance and predominance of key land elements in the observed area. When analyses are supported by high (10–30 m) or very high ( 〈 10 m) spatial resolution remote sensing data, the methodology provides a systematic approach for the representation of land use that is consistent with the concepts and methodologies developed by the International Panel on Climate Change(IPCC) to fulfill UNFCCC commitments. In particular, data with high and very high spatial resolution provide good results, with overall accuracies above 87% in the identification of key land elements that characterize land use classes. The methodology could be used to assess land use in any context (e.g., for any land use category or in any country and region) as it is based on the definition of user/project rules that should be tailored on the land use function of any territory.

Beschreibung: Hydrocarbon exploration has been underway in the north of West Siberia for several decades. Giant gas fields on the Yamal Peninsula are expected to begin feeding the Nord Stream pipeline to Western Europe in late 2012. Employing a variety of high- to very high-resolution satellite-based sensors, we have followed the establishment and spread of Bovanenkovo, the biggest and first field to be developed. Extensive onsite field observations and measurements of land use and land cover changes since 1985 have been combined with intensive participant observation in all seasons among indigenous Nenets reindeer herders and long-term gas field workers during 2004–2007 and 2010–2011. Time series and multi-resolution imagery was used to build a chronology of the gas field’s development. Large areas of partially or totally denuded tundra and most forms of expanding infrastructure are readily tracked with Landsat scenes (1985, 1988, 2000, 2009, 2011). SPOT (1993, 1998) and ASTER (2001) were also used. Quickbird-2 (2004) and GeoEye (2010) were most successful in detecting small-scale anthropogenic disturbances as well as individual camps of nomadic herders moving in the vicinity of the gas field. For assessing gas field development the best results are obtained by combining lower resolution with Very High Resolution (VHR) imagery (spatial resolution

Beschreibung: In this paper, the three-component power decomposition for polarimetric SAR (PolSAR) data with an adaptive volume scattering model is proposed. The volume scattering model is assumed to be reflection-symmetric but parameterized. For each image pixel, the decomposition first starts with determining the adaptive parameter based on matrix similarity metric. Then, a respective scattering power component is retrieved with the established procedure. It has been shown that the proposed method leads to complete elimination of negative powers as the result of the adaptive volume scattering model. Experiments with the PolSAR data from both the NASA/JPL (National Aeronautics and Space Administration/Jet Propulsion Laboratory) Airborne SAR (AIRSAR) and the JAXA (Japan Aerospace Exploration Agency) ALOS-PALSAR also demonstrate that the proposed method not only obtains similar/better results in vegetated areas as compared to the existing Freeman-Durden decomposition but helps to improve discrimination of the urban regions.

Beschreibung: Foam fraction can be retrieved from space-based microwave radiometric data at frequencies from 1 to 37 GHz. The retrievals require modeling of ocean surface emissivity fully covered with sea foam. To model foam emissivity well, knowledge of foam properties, both mechanical and dielectric, is necessary because these control the radiative processes in foam. We present a physical description of foam dielectric properties obtained from the foam dielectric constant including foam skin depth; foam impedance; wavelength variations in foam thickness, roughness of foam layer interfaces with air and seawater; and foam scattering parameters such as size parameter, and refraction index. Using these, we analyze the scattering, absorption, reflection and transmission in foam and gain insights into why volume scattering in foam is weak; why the main absorption losses are confined to the wet portion of the foam; how the foam impedance matching provides the transmission of electromagnetic radiation in foam and maximizes the absorption; and what is the potential for surface scattering at the foam layers boundaries. We put all these elements together and offer a conceptual understanding for the high, black-body-like emissivity of foam floating on the sea surface. We also consider possible scattering regimes in foam.

Beschreibung: Nowadays wireless sensor netwoks (WSN) technology, wireless communications and digital electronics have made it realistic to produce a large scale miniaturized devices integrating sensing, processing and communication capabilities. The focus of this paper is to present an innovative mobile platform for heterogeneous sensor networks, combined with adaptive methods to optimize the communication architecture for novel potential applications in multimedia and entertainment. In fact, in the near future, some of the applications foreseen for WSNs will employ multi-platform systems with a high number of different devices, which may be completely different in nature, size, computational and energy capabilities, etc. Nowadays, in addition, data collection could be performed by UAV platforms which can be a sink for ground sensors layer, acting essentially as a mobile gateway. In order to maximize the system performances and the network lifespan, the authors propose a recently developed hybrid technique based on evolutionary algorithms. The goal of this procedure is to optimize the communication energy consumption in WSN by selecting the optimal multi-hop routing schemes, with a suitable hybridization of different routing criteria. The proposed approach can be potentially extended and applied to ongoing research projects focused on UAV-based sensing with WSN augmentation and real-time processing for immersive media experiences.

Beschreibung: In this study, daily maps of snow cover distribution and sea ice extent produced by NOAA’s interactive multisensor snow and ice mapping system (IMS) were validated using in situ snow depth data from observing stations obtained from NOAA’s National Climatic Data Center (NCDC) for calendar years 2006 to 2010. IMS provides daily maps of snow and sea ice extent within the Northern Hemisphere using data from combination of geostationary and polar orbiting satellites in visible, infrared and microwave spectrums. Statistical correspondence between the IMS and in situ point measurements has been evaluated assuming that ground measurements are discrete and continuously distributed over a 4 km IMS snow cover maps. Advanced Very High Resolution Radiometer (AVHRR) land and snow classification data are supplemental datasets used in the further analysis of correspondence between the IMS product and in situ measurements. The comparison of IMS maps with in situ snow observations conducted over a period of four years has demonstrated a good correspondence of the data sets. The daily rate of agreement between the products mostly ranges between 80% and 90% during the Northern Hemisphere through the winter seasons when about a quarter to one third of the territory of continental US is covered with snow. Further, better agreement was observed for stations recording higher snow depth. The uncertainties in validation of IMS snow product with stationed NCDC data were discussed.

Beschreibung: A methodology is described for the validation of Medium Resolution Imaging Spectrometer (MERIS) Terrestrial Chlorophyll Index (MTCI) data over heterogeneous land surfaces in an agricultural region in Southern Italy. The approach involves the use inverse canopy reflectance modeling techniques to derive maps of canopy chlorophyll content (CCC) and leaf area index (LAI) at fine spatial resolution. Indirect field measurements are used for validation of the fine spatial resolution data. Subsequently, these maps are aggregated based on a regular grid at 1 km spatial resolution to validate MERIS Level 2 MTCI (300 m). RapidEye satellite sensor data with a pixel size of 6.5 m are used for this purpose. Based on a set of independent ground measurements, fine spatial resolution maps achieved an R2 = 0.78 and RMSE = 0.39 for CCC and R2 = 0.76 and RMSE = 0.64 for LAI. The relationship between MERIS L2 MTCI and CCC [g∙m−2] achieved a coefficient of determination of 0.74 and it resulted to be extremely statistically significant (p-value 〈 0.001). Additionally, a relative validation of two other satellite products at medium resolution spatial scale, namely MERIS leaf area index (LAI) and Moderate Resolution Imaging Spectrometer (MODIS) LAI was performed by comparison with the fine spatial resolution LAI map. Results indicated a better accuracy in LAI estimation of MERIS (RMSE = 0.33) compared to MODIS (RMSE = 0.81) data.

Beschreibung: Defined in the early 1990s for use with gridded satellite passive microwave data, the Equal-Area Scalable Earth Grid (EASE-Grid) was quickly adopted and used for distribution of a variety of satellite and in situ data sets. Conceptually easy to understand, EASE-Grid suffers from limitations that make it impossible to format in the widely popular GeoTIFF convention without reprojection. Importing EASE-Grid data into standard mapping software packages is nontrivial and error-prone. This article defines a standard for an improved EASE-Grid 2.0 definition, addressing how the changes rectify issues with the original grid definition. Data distributed using the EASE-Grid 2.0 standard will be easier for users to import into standard software packages and will minimize common reprojection errors that users had encountered with the original EASE-Grid definition.

Beschreibung: This paper outlines the methods and results for monitoring forest change and resulting carbon emissions for the 1990–2000 and 200–2005 periods carried out over tropical Central and South America. To produce our forest change estimates we used a systematic sample of medium resolution satellite data processed to forest change maps covering 1230 sites of 20 km by 20 km, each located at the degree confluence. Biomass data were spatially associated to each individual sample site so that annual carbon emissions could be estimated. For our study area we estimate that forest cover in the study area had fallen from 763 Mha (s.e. 10 Mha) in 1990 to 715 Mha (s.e. 10 Mha) in 2005. During the same period other wooded land (i.e., non-forest woody vegetation) had fallen from 191 Mha (s.e. 5.5 Mha) to 184 Mha (s.e. 5.5 Mha). This equates to an annual gross loss of 3.74 Mha∙y−1 of forests (0.50% annually) between 1990 and 2000, rising to 4.40 Mha∙y−1 in the early 2000s (0.61% annually), with Brazil accounting for 69% of the total losses. The annual carbon emissions from the combined loss of forests and other wooded land were calculated to be 482 MtC∙y−1 (s.e. 29 MtC∙y−1) for the 1990s, and 583 MtC∙y−1 (s.e. 48 MtC∙y−1) for the 2000 to 2005 period. Our maximum estimate of sinks from forest regrowth in tropical South America is 92 MtC∙y−1. These estimates of gross emissions correspond well with the national estimates reported by Brazil, however, they are less than half of those reported in a recent study based on the FAO country statistics, highlighting the need for continued research in this area.

Beschreibung: Owing to the shallowness of waters, vast areas, and spatial complexity, reefscape mapping requires Digital Depth Models (DDM) at a fine scale but over large areas. Outperforming waterborne surveys limited by shallow water depths and costly airborne campaigns, recently launched satellite sensors, endowed with high spectral and very high spatial capabilities, can adequately address the raised issues. Doubling the number of spectral bands, the innovative eight band WorldView-2 (WV2) imagery is very susceptible to enhance the DDM retrieved from the traditional four band QuickBird-2 (QB2). Based on an efficiently recognized algorithm (ratio transform), resolving for the clear water bathymetry, we compared DDM derived from simulated QB2 with WV2 spectral combinations using acoustic ground-truthing in Moorea (French Polynesia). Three outcomes emerged from this study. Increasing spatial resolution from 2 to 0.5 m led to reduced agreement between modeled and in situ water depths. The analytical atmospheric correction (FLAASH) provided poorer results than those derived without atmospheric correction and empirical dark object correction. The purple, green, yellow and NIR3 (WV2 1st-3rd-4th-8th bands) spectral combination, processed with the atmospheric correction at the 2 m resolution, furnished the most robust consistency with ground-truthing (30 m (r = 0.65)), gaining 10 m of penetration relative to other spaceborne-derived bathymetric retrievals. The integration of the WV2-boosted bathymetry estimation into radiative transfer model holds great promise to frequently monitor the reefscape features at the colony-scale level.

Beschreibung: All things in our world are related to some location in space and time, and according to Tobler’s first law of geography “everything is related to everything else, but near things are more related than distant things” [1]. Since humans exist they have been contemplating about space and time and have tried to depict and manage the geographic space they live in. We know graphic representations of the land from various regions of the world dating back several thousands of years. The processing and analysis of spatial data has a long history in the disciplines that deal with spatial data such as geography, surveying engineering, cartography, photogrammetry, and remote sensing. Until recently, all these activities have been analog in nature; only since the invention of the computer in the second half of the 20th century and the use of computers for the acquisition, storage, analysis, and display of spatial data starting in the 1960s we speak of geo-information and geo-information systems. [...]

Beschreibung: This work summarizes the activities carried out by the SMOS (Soil Moisture and Ocean Salinity) Barcelona Expert Center (SMOS-BEC) team in conjunction with the CIALE/Universidad de Salamanca team, within the framework of the European Space Agency (ESA) CALIMAS project in preparation for the SMOS mission and during its first year of operation. Under these activities several studies were performed, ranging from Level 1 (calibration and image reconstruction) to Level 4 (land pixel disaggregation techniques, by means of data fusion with higher resolution data from optical/infrared sensors). Validation of SMOS salinity products by means of surface drifters developed ad-hoc, and soil moisture products over the REMEDHUS site (Zamora, Spain) are also presented. Results of other preparatory activities carried out to improve the performance of eventual SMOS follow-on missions are presented, including GNSS-R to infer the sea state correction needed for improved ocean salinity retrievals and land surface parameters. Results from CALIMAS show a satisfactory performance of the MIRAS instrument, the accuracy and efficiency of the algorithms implemented in the ground data processors, and explore the limits of spatial resolution of soil moisture products using data fusion, as well as the feasibility of GNSS-R techniques for sea state determination and soil moisture monitoring.

Beschreibung: Geoinformation derived from Earth observation (EO) plays a key role for detecting, analyzing and monitoring landslides to assist hazard and risk analysis. Within the framework of the EC-GMES-FP7 project SAFER (Services and Applications For Emergency Response) a semi-automated object-based approach for landslide detection and classification has been developed. The method was applied to a case study in North-Western Italy using SPOT-5 imagery and a digital elevation model (DEM), including its derivatives slope, aspect, curvature and plan curvature. For the classification in the object-based environment spectral, spatial and morphological properties as well as context information were used. In a first step, landslides were classified on a coarse segmentation level to separate them from other features with similar spectral characteristics. Thereafter, the classification was refined on a finer segmentation level, where two categories of mass movements were differentiated: flow-like landslides and other landslide types. In total, an area of 3.77 km² was detected as landslide-affected area, 1.68 km² were classified as flow-like landslides and 2.09 km² as other landslide types. The outcomes were compared to and validated by pre-existing landslide inventory data (IFFI and PAI) and an interpretation of PSI (Persistent Scatterer Interferometry) measures derived from ERS1/2, ENVISAT ASAR and RADARSAT-1 data. The spatial overlap of the detected landslides and existing landslide inventories revealed 44.8% (IFFI) and 50.4% (PAI), respectively. About 32% of the polygons identified through OBIA are covered by persistent scatterers data.

Beschreibung: We demonstrate compact, low power, lightweight laser-based sensors for measuring trace gas species in the atmosphere designed specifically for electronic unmanned aerial vehicle (UAV) platforms. The sensors utilize non-intrusive optical sensing techniques to measure atmospheric greenhouse gas concentrations with unprecedented vertical and horizontal resolution (~1 m) within the planetary boundary layer. The sensors are developed to measure greenhouse gas species including carbon dioxide, water vapor and methane in the atmosphere. Key innovations are the coupling of very low power vertical cavity surface emitting lasers (VCSELs) to low power drive electronics and sensitive multi-harmonic wavelength modulation spectroscopic techniques. The overall mass of each sensor is between 1–2 kg including batteries and each one consumes less than 2 W of electrical power. In the initial field testing, the sensors flew successfully onboard a T-Rex Align 700E robotic helicopter and showed a precision of 1% or less for all three trace gas species. The sensors are battery operated and capable of fully automated operation for long periods of time in diverse sensing environments. Laser-based trace gas sensors for UAVs allow for high spatial mapping of local greenhouse gas concentrations in the atmospheric boundary layer where land/atmosphere fluxes occur. The high-precision sensors, coupled to the ease-of-deployment and cost effectiveness of UAVs, provide unprecedented measurement capabilities that are not possible with existing satellite-based and suborbital aircraft platforms.

Beschreibung: Analysis of spatial and temporal changes of vegetation cover using remote sensing (RS) technology, in conjunction with Geographic Information Systems (GIS), is becoming increasingly important in environmental conservation. The objective of this study was to use RS data and GIS techniques to assess the vegetation cover in 1989 and 2009, in the barangays (smallest administrative units) of the city of San Fernando, La Union, the Philippines, for planning vegetation rehabilitation. Landsat images were used to prepare both the 1989 and 2009 land cover maps, which were then used to detect changes in the vegetation cover for the barangays. In addition to conventional accuracy assessment parameters such as; proportion correct, and standard Kappa index of agreement, two other parameters; quantity, and allocation disagreements were used to assess the accuracy of the land cover classification. Results revealed that there were gains and losses of vegetation cover in most of the barangays, but overall vegetation cover increased by 11% (around 625 ha) based on the original extent of 1989. Those barangays that showed substantial net losses in vegetation cover need to be prioritised for rehabilitation planning. As exemplified in this study, the collection, processing and analysis of relevant RS and GIS information, can facilitate priority-setting in the planning of environmental rehabilitation and conservation by the local government at both city and barangay levels.

Beschreibung: The primary objective of this research is to predict and analyze the future urban growth of Dhaka City using the Landsat satellite images of 1989, 1999 and 2009. Dhaka City Corporation (DCC) and its surrounding impact areas have been selected as the study area. At the beginning, a fisher supervised classification method has been applied to prepare the base maps with five land cover classes. In the next stage, three different models have been implemented to simulate the land cover map of Dhaka city of 2009. These have been named as “Stochastic Markov (St_Markov)” Model, “Cellular Automata Markov (CA_Markov)” Model and “Multi Layer Perceptron Markov (MLP_Markov)” Model. Then the best-fitted model has been selected by implementing a method to compare land cover categories in three maps: a reference map of time 1, a reference map of time 2 and a simulation map of time 2. This is how the “Multi Layer Perceptron Markov (MLP_Markov)” Model has been qualified as the most appropriate model for this research. Later, using the MLP_Markov model, the land cover map of 2019 has been predicted. The MLP_Markov model extrapolates that built-up area increases from 46% to 58% of the total study area during 2009–2019.

Beschreibung: Amazonian forests are extremely heterogeneous at different spatial scales. This review intends to present the large-scale patterns of the ecosystem properties of Amazonia, and focuses on two parts of the main components of the net primary production: the long-lived carbon pools (wood) and short-lived pools (leaves). First, the focus is on forest biophysical properties, and secondly, on the macro-scale leaf phenological patterns of these forests, looking at field measurements and bringing into discussion the recent findings derived from remote sensing dataset. Finally, I discuss the results of the three major droughts that hit Amazonia in the last 15 years. The panorama that emerges from this review suggests that slow growing forests in central and eastern Amazonia, where soils are poorer, have significantly higher above ground biomass and higher wood density, trees are higher and present lower proportions of large-leaved species than stands in northwest and southwest Amazonia. However, the opposite pattern is observed in relation to forest productivity and dynamism, which is higher in western Amazonia than in central and eastern forests. The spatial patterns on leaf phenology across Amazonia are less marked. Field data from different forest formations showed that new leaf production can be unrelated to climate seasonality, timed with radiation, timed with rainfall and/or river levels. Oppositely, satellite images exhibited a large-scale synchronized peak in new leaf production during the dry season. Satellite data and field measurements bring contrasting results for the 2005 drought. Discussions on data processing and filtering, aerosols effects and a combined analysis with field and satellite images are presented. It is suggested that to improve the understanding of the large-scale patterns on Amazonian forests, integrative analyses that combine new technologies in remote sensing and long-term field ecological data are imperative.

Beschreibung: Predicting the spatial and temporal occurrence of rainfall triggered landslides represents an important scientific and operational issue due to the high threat that they pose to human life and property. This study investigates the relationship between rainfall, soil moisture conditions and landslide movement by using recorded movements of a rock slope located in central Italy, the Torgiovannetto landslide. This landslide is a very large rock slide, threatening county and state roads. Data acquired by a network of extensometers and a meteorological station clearly indicate that the movements of the unstable wedge, first detected in 2003, are still proceeding and the alternate phases of quiescence and reactivation are associated with rainfall patterns. By using a multiple linear regression approach, the opening of the tension cracks (as recorded by the extensometers) as a function of rainfall and soil moisture conditions prior the occurrence of rainfall, are predicted for the period 2007–2009. Specifically, soil moisture indicators are obtained through the Soil Water Index, SWI, a product derived by the Advanced SCATterometer (ASCAT) on board the MetOp (Meteorological Operational) satellite and by an Antecedent Precipitation Index, API. Results indicate that the regression performance (in terms of correlation coefficient, r) significantly enhances if an indicator of the soil moisture conditions is included. Specifically, r is equal to 0.40 when only rainfall is used as a predictor variable and increases to r = 0.68 and r = 0.85 if the API and the SWI are used respectively. Therefore, the coarse spatial resolution (25 km) of satellite data notwithstanding, the ASCAT SWI is found to be very useful for the prediction of landslide movements on a local scale. These findings, although valid for a specific area, present new opportunities for the effective use of satellite-derived soil moisture estimates to improve landslide forecasting.

Beschreibung: In order to better constrain the utility of multispectral datasets in the characterization of surface materials, Landsat Thematic Mapper (TM) data were evaluated in the discrimination of geological classes in the Cape Smith Belt of Quebec, a greenstone belt that hosts Early Proterozoic units including those of the Purtuniq ophiolite. Ground-based measurements collected for the study area highlight the importance of chemical alteration in controlling the reflectance properties of key geological classes. The spatial distribution of exposed lithologies in the study area was determined through (1) image classification using a feedforward backpropagation neural network classifier; and (2) generation of fraction images for spectral end members using a linear unmixing algorithm and ground reflectance data. Despite some shortcomings, the database of surface cover generated by the neural network classifier is a useful representation of the spatial distribution of exposed geological materials in the study area, with an overall agreement with ground truth of 87.7%. In contrast, the fraction images generated through unmixing are poor representations of ground truth for several key lithological classes. These results underscore both the considerable utility and marked limitations of Landsat TM data in the mapping of igneous and metamorphic lithologies.

Beschreibung: Unmanned Aerial Vehicles (UAVs) are an exciting new remote sensing tool capable of acquiring high resolution spatial data. Remote sensing with UAVs has the potential to provide imagery at an unprecedented spatial and temporal resolution. The small footprint of UAV imagery, however, makes it necessary to develop automated techniques to geometrically rectify and mosaic the imagery such that larger areas can be monitored. In this paper, we present a technique for geometric correction and mosaicking of UAV photography using feature matching and Structure from Motion (SfM) photogrammetric techniques. Images are processed to create three dimensional point clouds, initially in an arbitrary model space. The point clouds are transformed into a real-world coordinate system using either a direct georeferencing technique that uses estimated camera positions or via a Ground Control Point (GCP) technique that uses automatically identified GCPs within the point cloud. The point cloud is then used to generate a Digital Terrain Model (DTM) required for rectification of the images. Subsequent georeferenced images are then joined together to form a mosaic of the study area. The absolute spatial accuracy of the direct technique was found to be 65–120 cm whilst the GCP technique achieves an accuracy of approximately 10–15 cm.

Beschreibung: Dust storms in North China result in high concentrations of airborne dust particles, which cause detrimental effects on human health as well as social and economic losses and environmental degradation. To investigate the impact of land surface processes on dust storms, we simulate two dust storm events in North China during spring 2002 using two versions of a dust storm prediction system developed by the Institute for Atmospheric Physics (IAP) in Beijing, China. The primary difference between the IAP Sandstorm Prediction System (IAPS 1.0) and more recent version (IAPS 2.0) is the land surface modeling. IAPS 1.0 is based on the Oregon State University (OSU) land surface model, whereas the latest version of the dust storm prediction (IAPS 2.0) uses NOAH land surface schemes for land surface modeling within a meteorological model, MM5. This work investigates whether the improved land surface modeling affects modeling of sandstorms. It is shown that an integrated sandstorm management system can be used to aid the following tasks: ensure sandstorm monitoring and warning; incorporate weather forecasts; ascertain the risk of a sandstorm disaster; integrate multiple technologies (for example, GIS, remote sensing, and information processing technology); track the progress of the storm in real-time; exhibit flexibility, accuracy and reliability (by using multiple sources of data, including in-situ meteorological observations); and monitor PM10 and PM2.5 dust concentrations in airborne dustfalls. The results indicate that with the new land surface scheme, the simulation of soil moisture is greatly improved, leading to a better estimate of the threshold frictional velocity, a key parameter for the estimating surface dust emissions. In this study, we also discuss specific mechanisms by which land surface processes affect dust storm modeling and make recommendations for further improvements to numerical dust storm simulations.

Beschreibung: A method of counting the number of coniferous trees by species within forest compartments was developed by combining an individual tree crown delineation technique with a treetop detection technique, using high spatial resolution optical sensor data. When this method was verified against field data from the Shinshu University Campus Forest composed of various cover types, the accuracy for the total number of trees per stand was higher than 84%. This shows improvements over the individual tree crown delineation technique alone which had accuracies lower than 62%, or the treetop detection technique alone which had accuracies lower than 78%. However, the accuracy of the number of trees classified by species was less than 84%. The total number of trees by species per stand was improved with exclusion of the understory species and ranged from 45.2% to 93.8% for Chamaecyparis obtusa and C. pisifera and from 37.9% to 98.1% for broad-leaved trees because many of these were understory species. The better overall results are attributable primarily to the overestimation of Pinus densiflora, Larix kaempferi and broad-leaved trees compensating for the underestimation of C. obtusa and C. pisifera. Practical forest management can be enhanced by registering the output resulting from this technology in a forest geographical information system database. This approach is mostly useful for conifer plantations containing medium to old age trees, which have a higher timber value.

Beschreibung: Unmanned aerial vehicles (UAVs) represent a quickly evolving technology, broadening the availability of remote sensing tools to small-scale research groups across a variety of scientific fields. Development of UAV platforms requires broad technical skills covering platform development, data post-processing, and image analysis. UAV development is constrained by a need to balance technological accessibility, flexibility in application and quality in image data. In this study, the quality of UAV imagery acquired by a miniature 6-band multispectral imaging sensor was improved through the application of practical image-based sensor correction techniques. Three major components of sensor correction were focused upon: noise reduction, sensor-based modification of incoming radiance, and lens distortion. Sensor noise was reduced through the use of dark offset imagery. Sensor modifications through the effects of filter transmission rates, the relative monochromatic efficiency of the sensor and the effects of vignetting were removed through a combination of spatially/spectrally dependent correction factors. Lens distortion was reduced through the implementation of the Brown–Conrady model. Data post-processing serves dual roles in data quality improvement, and the identification of platform limitations and sensor idiosyncrasies. The proposed corrections improve the quality of the raw multispectral imagery, facilitating subsequent quantitative image analysis.

Beschreibung: Quantitative real-time observations of a tsunami have been limited to deep-water, pressure-sensor observations of changes in the sea surface elevation and observations of sea level fluctuations at the coast, which are essentially point measurements. Constrained by these data, models have been used for predictions and warning of the arrival of a tsunami, but to date no system exists for local detection of an actual incoming wave with a significant warning capability. Networks of coastal high frequency (HF)-radars are now routinely observing surface currents in many countries. We report here on an empirical method for the detection of the initial arrival of a tsunami, and demonstrate its use with results from data measured by fourteen HF radar sites in Japan and USA following the magnitude 9.0 earthquake off Sendai, Japan, on 11 March 2011. The distance offshore at which the tsunami can be detected, and hence the warning time provided, depends on the bathymetry: the wider the shallow continental shelf, the greater this time. We compare arrival times at the radars with those measured by neighboring tide gauges. Arrival times measured by the radars preceded those at neighboring tide gauges by an average of 19 min (Japan) and 15 min (USA) The initial water-height increase due to the tsunami as measured by the tide gauges was moderate, ranging from 0.3 to 2 m. Thus it appears possible to detect even moderate tsunamis using this method. Larger tsunamis could obviously be detected further from the coast. We find that tsunami arrival within the radar coverage area can be announced 8 min (i.e., twice the radar spectral time resolution) after its first appearance. This can provide advance warning of the tsunami approach to the coastline locations.

Beschreibung: The continuously increasing demand of accurate quantitative high quality information on land surface properties will be faced by a new generation of environmental Earth observation (EO) missions. One current example, associated with a high potential to contribute to those demands, is the multi-spectral ESA Sentinel-2 (S2) system. The present study focuses on the evaluation of spectral information content needed for crop leaf area index (LAI) mapping in view of the future sensors. Data from a field campaign were used to determine the optimal spectral sampling from available S2 bands applying inversion of a radiative transfer model (PROSAIL) with look-up table (LUT) and artificial neural network (ANN) approaches. Overall LAI estimation performance of the proposed LUT approach (LUTN50) was comparable in terms of retrieval performances with a tested and approved ANN method. Employing seven- and eight-band combinations, the LUTN50 approach obtained LAI RMSE of 0.53 and normalized LAI RMSE of 0.12, which was comparable to the results of the ANN. However, the LUTN50 method showed a higher robustness and insensitivity to different band settings. Most frequently selected wavebands were located in near infrared and red edge spectral regions. In conclusion, our results emphasize the potential benefits of the Sentinel-2 mission for agricultural applications.

Beschreibung: An analytical form of relationship between spectral vegetation indices (VI) is derived in the context of cross calibration and translation of vegetation index products from different sensors. The derivation has been carried out based on vegetation isoline equations that relate two reflectance values observed at different wavelength ranges often represented by spectral band passes. The derivation was first introduced and explained conceptually by assuming a general functional form for VI model equation. This process is universal by which two VIs of different sensors and/or different model equations can be related conceptually. The general process was then applied to the actual case of normalized difference vegetation index (NDVI) from two sensors in a framework of inter-sensor continuity. The derivation results indicate that the NDVI from one sensor can be approximated by a rational function of NDVI from the other sensor as a parameter. Similar result was obtained for the case of soil adjusted VI, enhanced VI, and two-band variance of enhanced VI.

Beschreibung: Accurate solar surface irradiance data is a prerequisite for an efficient planning and operation of solar energy systems. Further, it is essential for climate monitoring and analysis. Recently, the demand on information about spectrally resolved solar surface irradiance has grown. As surface measurements are rare, satellite derived information with high accuracy might fill this gap. This paper describes a new approach for the retrieval of spectrally resolved solar surface irradiance from satellite data. The method combines a eigenvector-hybrid look-up table approach for the clear sky case with satellite derived cloud transmission (Heliosat method). The eigenvector LUT approach is already used to retrieve the broadband solar surface irradiance of data sets provided by the Climate Monitoring Satellite Application Facility (CM-SAF). This paper describes the extension of this approach to wavelength bands and the combination with spectrally resolved cloud transmission values derived with radiative transfer corrections of the broadband cloud transmission. Thus, the new approach is based on radiative transfer modeling and enables the use of extended information about the atmospheric state, among others, to resolve the effect of water vapor and ozone absorption bands. The method is validated with spectrally resolved measurements from two sites in Europe and by comparison with radiative transfer calculations. The validation results demonstrate the ability of the method to retrieve accurate spectrally resolved irradiance from satellites. The accuracy is in the range of the uncertainty of surface measurements, with exception of the UV and NIR ( ≥ 1200 nm) part of the spectrum, where higher deviations occur.

Beschreibung: The visualization of fully polarimetric radar data is hindered by traditional remote sensing methodologies for displaying data due to the large number of parameters per pixel in such data, and the non-scalar nature of variables such as phase difference. In this paper, a new method is described that uses icons instead of image pixels to represent the image data so that polarimetric properties and geographic context can be visualized together. The icons are parameterized using the alpha-entropy decomposition of polarimetric data. The resulting image allows the following five variables to be displayed simultaneously: unpolarized power, alpha angle, polarimetric entropy, anisotropy and orientation angle. Examples are given for both airborne and laboratory-based imaging.

Beschreibung: Post-fire vegetation response is influenced by the interaction of natural and anthropogenic factors such as topography, climate, vegetation type and restoration practices. Previous research has analyzed the relationship of some of these factors to vegetation response, but few have taken into account the effects of pre-fire restoration practices. We selected three wildfires that occurred in Bandelier National Monument (New Mexico, USA) between 1999 and 2007 and three adjacent unburned control areas. We used interannual trends in the Normalized Difference Vegetation Index (NDVI) time series data derived from the Moderate Resolution Imaging Spectroradiometer (MODIS) to assess vegetation response, which we define as the average potential photosynthetic activity through the summer monsoon. Topography, fire severity and restoration treatment were obtained and used to explain post-fire vegetation response. We applied parametric (Multiple Linear Regressions-MLR) and non-parametric tests (Classification and Regression Trees-CART) to analyze effects of fire severity, terrain and pre-fire restoration treatments (variable used in CART) on post-fire vegetation response. MLR results showed strong relationships between vegetation response and environmental factors (p 〈 0.1), however the explanatory factors changed among treatments. CART results showed that beside fire severity and topography, pre-fire treatments strongly impact post-fire vegetation response. Results for these three fires show that pre-fire restoration conditions along with local environmental factors constitute key processes that modify post-fire vegetation response.

Beschreibung: Climate change is a factor that largely contributes to the increase of forest areas affected by natural damages. Therefore, the development of methodologies for forest monitoring and rapid assessment of affected areas is required. Space-borne synthetic aperture radar (SAR) imagery with high resolution is now available for large-scale forest mapping and forest monitoring applications. However, a correct interpretation of SAR images requires an adequate preprocessing of the data consisting of orthorectification and radiometric calibration. The resolution and quality of the digital elevation model (DEM) used as reference is crucial for this purpose. Therefore, the primary aim of this study was to analyze the influence of the DEM quality used in the preprocessing of the SAR data on the mapping accuracy of forest types. In order to examine TerraSAR-X images to map forest dominated by deciduous and coniferous trees, High Resolution SpotLight images were acquired for two study sites in southern Germany. The SAR images were preprocessed with a Shuttle Radar Topography Mission (SRTM) DEM (resolution approximately 90 m), an airborne laser scanning (ALS) digital terrain model (DTM) (5 m resolution), and an ALS digital surface model (DSM) (5 m resolution). The orthorectification of the SAR images using high resolution ALS DEMs was found to be important for the reduction of errors in pixel location and to increase the classification accuracy of forest types. SAR images preprocessed with ALS DTMs resulted in the highest classification accuracies, with kappa coefficients of 0.49 and 0.41, respectively. SAR images preprocessed with ALS DTMs resulted in greater accuracy than those preprocessed with ALS DSMs in most cases. The classification accuracy of forest types using SAR images preprocessed with the SRTM DEM was fair, with kappa coefficients of 0.23 and 0.32, respectively.Analysis of the radar backscatter indicated that sample plots dominated by coniferous trees tended to have lower scattering coefficients than plots dominated by deciduous trees. Leaf-off images were only slightly better suited for the classification than leaf-on images. The combination of leaf-off and leaf-on improved the classification accuracy considerably since the backscatter changed between seasons, especially in deciduous-dominated forest.

Beschreibung: The goal of the paper is to detect pixels that contain targets of known spectra. The target can be present in a sub- or above pixel. Pixels without targets are classified as background pixels. Each pixel is treated via the content of its neighborhood. A pixel whose spectrum is different from its neighborhood is classified as a “suspicious point”. In each suspicious point there is a mix of target(s) and background. The main objective in a supervised detection (also called “target detection”) is to search for a specific given spectral material (target) in hyperspectral imaging (HSI) where the spectral signature of the target is known a priori from laboratory measurements. In addition, the fractional abundance of the target is computed. To achieve this we present two linear unmixing algorithms that recognize targets with known (given) spectral signatures. The CLUN is based on automatic feature extraction from the target’s spectrum. These features separate the target from the background. The ROTU algorithm is based on embedding the spectra space into a special space by random orthogonal transformation and on the statistical properties of the embedded result. Experimental results demonstrate that the targets’ locations were extracted correctly and these algorithms are robust and efficient.