ALBERT

Description: The lack of a universal simulation method for triboelectric nanogenerator (TENG) makes the device design and optimization difficult before experiment, which protracts the research and development process and hinders the landing of practical TENG applications. The existing electrostatic induction models for TENGs have limitations in simulating TENGs with complex geometries and their dynamic behaviors under practical movements due to the topology change issues. Here, a dynamic finite element method (FEM) model is proposed. The introduction of air buffer layers and the moving mesh method eliminates the topology change issues during practical movement and allows simulation of dynamic and time-varying behaviors of TENGs with complex 2D/3D geometries. Systematic investigations are carried out to optimize the air buffer thickness and mesh densities, and the optimized results show excellent consistency with the experimental data and results based on other existing methods. It also shows that a 3D disk-type rotating TENG can be simulated using the model, clearly demonstrating the capability and superiority of the dynamic FEM model. Moreover, the dynamic FEM model is used to optimize the shape of the tribo-material, which is used as a preliminary example to demonstrate the possibility of designing a TENG-based sensor.

Description: In this paper, 3D-printed electromagnetic (or microwave) encoders with synchronous reading based on permittivity contrast, and devoted to the measurement of displacements and velocities, are reported for the first time. The considered encoders are based on two chains of linearly shaped apertures made on a 3D-printed high-permittivity dielectric material. One such aperture chain contains the identification (ID) code, whereas the other chain provides the clock signal. Synchronous reading is necessary in order to determine the absolute position if the velocity between the encoder and the sensitive part of the reader is not constant. Such absolute position can be determined as long as the whole encoder is encoded with the so-called de Bruijn sequence. For encoder reading, a splitter/combiner structure with each branch loaded with a series gap and a slot resonator (each one tuned to a different frequency) is considered. Such a structure is able to detect the presence of the apertures when the encoder is displaced, at short distance, over the slots. Thus, by injecting two harmonic signals, conveniently tuned, at the input port of the splitter/combiner structure, two amplitude modulated (AM) signals are generated by tag motion at the output port of the sensitive part of the reader. One of the AM envelope functions provides the absolute position, whereas the other one provides the clock signal and the velocity of the encoder. These synchronous 3D-printed all-dielectric encoders based on permittivity contrast are a good alternative to microwave encoders based on metallic inclusions in those applications where low cost as well as major robustness against mechanical wearing and aging effects are the main concerns.

Description: This paper presents a vulnerable road user (VRU) tracking algorithm capable of handling noisy and missing detections from heterogeneous sensors. We propose a cooperative fusion algorithm for matching and reinforcing of radar and camera detections using their proximity and positional uncertainty. The belief in the existence and position of objects is then maximized by temporal integration of fused detections by a multi-object tracker. By switching between observation models, the tracker adapts to the detection noise characteristics making it robust to individual sensor failures. The main novelty of this paper is an improved imputation sampling function for updating the state when detections are missing. The proposed function uses a likelihood without association that is conditioned on the sensor information instead of the sensor model. The benefits of the proposed solution are two-fold: firstly, particle updates become computationally tractable and secondly, the problem of imputing samples from a state which is predicted without an associated detection is bypassed. Experimental evaluation shows a significant improvement in both detection and tracking performance over multiple control algorithms. In low light situations, the cooperative fusion outperforms intermediate fusion by as much as 30%, while increases in tracking performance are most significant in complex traffic scenes.

Description: Flat surfaces captured by 3D point clouds are often used for localization, mapping, and modeling. Dense point cloud processing has high computation and memory costs making low-dimensional representations of flat surfaces such as polygons desirable. We present Polylidar3D, a non-convex polygon extraction algorithm which takes as input unorganized 3D point clouds (e.g., LiDAR data), organized point clouds (e.g., range images), or user-provided meshes. Non-convex polygons represent flat surfaces in an environment with interior cutouts representing obstacles or holes. The Polylidar3D front-end transforms input data into a half-edge triangular mesh. This representation provides a common level of abstraction for subsequent back-end processing. The Polylidar3D back-end is composed of four core algorithms: mesh smoothing, dominant plane normal estimation, planar segment extraction, and finally polygon extraction. Polylidar3D is shown to be quite fast, making use of CPU multi-threading and GPU acceleration when available. We demonstrate Polylidar3D’s versatility and speed with real-world datasets including aerial LiDAR point clouds for rooftop mapping, autonomous driving LiDAR point clouds for road surface detection, and RGBD cameras for indoor floor/wall detection. We also evaluate Polylidar3D on a challenging planar segmentation benchmark dataset. Results consistently show excellent speed and accuracy.

Description: In this study, we proposed a semi-automated and interactive scheme for organ contouring in radiotherapy planning for patients with non-small cell lung cancers. Several organs were contoured, including the lungs, airway, heart, spinal cord, body, and gross tumor volume (GTV). We proposed some schemes to automatically generate and vanish the seeds of the random walks (RW) algorithm. We considered 25 lung cancer patients, whose computed tomography (CT) images were obtained from the China Medical University Hospital (CMUH) in Taichung, Taiwan. The manual contours made by clinical oncologists were taken as the gold standard for comparison to evaluate the performance of our proposed method. The Dice coefficient between two contours of the same organ was computed to evaluate the similarity. The average Dice coefficients for the lungs, airway, heart, spinal cord, and body and GTV segmentation were 0.92, 0.84, 0.83, 0.73, 0.85 and 0.66, respectively. The computation time was between 2 to 4 min for a whole CT sequence segmentation. The results showed that our method has the potential to assist oncologists in the process of radiotherapy treatment in the CMUH, and hopefully in other hospitals as well, by saving a tremendous amount of time in contouring.

Description: An essential aspect in the interaction between people and computers is the recognition of facial expressions. A key issue in this process is to select relevant features to classify facial expressions accurately. This study examines the selection of optimal geometric features to classify six basic facial expressions: happiness, sadness, surprise, fear, anger, and disgust. Inspired by the Facial Action Coding System (FACS) and the Moving Picture Experts Group 4th standard (MPEG-4), an initial set of 89 features was proposed. These features are normalized distances and angles in 2D and 3D computed from 22 facial landmarks. To select a minimum set of features with the maximum classification accuracy, two selection methods and four classifiers were tested. The first selection method, principal component analysis (PCA), obtained 39 features. The second selection method, a genetic algorithm (GA), obtained 47 features. The experiments ran on the Bosphorus and UIVBFED data sets with 86.62% and 93.92% median accuracy, respectively. Our main finding is that the reduced feature set obtained by the GA is the smallest in comparison with other methods of comparable accuracy. This has implications in reducing the time of recognition.

Description: Automated tracking of physical fitness has sparked a health revolution by allowing individuals to track their own physical activity and health in real time. This concept is beginning to be applied to tracking of cognitive load. It is well known that activity in the brain can be measured through changes in the body’s physiology, but current real-time measures tend to be unimodal and invasive. We therefore propose the concept of a wearable educational fitness (EduFit) tracker. We use machine learning with physiological data to understand how to develop a wearable device that tracks cognitive load accurately in real time. In an initial study, we found that body temperature, skin conductance, and heart rate were able to distinguish between (i) a problem solving activity (high cognitive load), (ii) a leisure activity (moderate cognitive load), and (iii) daydreaming (low cognitive load) with high accuracy in the test dataset. In a second study, we found that these physiological features can be used to predict accurately user-reported mental focus in the test dataset, even when relatively small numbers of training data were used. We explain how these findings inform the development and implementation of a wearable device for temporal tracking and logging a user’s learning activities and cognitive load.

Description: : The main purpose of this work is to study the effectiveness of using FeCeOx nanocomposites doped with Nb2O5 for the purification of aqueous solutions from manganese. X-ray diffraction, energy–dispersive analysis, scanning electron microscopy, vibrational magnetic spectroscopy, and mössbauer spectroscopy were used as research methods. It is shown that an increase in the dopant concentration leads to the transformation of the shape of nanoparticles from spherical to cubic and rhombic, followed by an increase in the size of the nanoparticles. The spherical shape of the nanoparticles is characteristic of a structure consisting of a mixture of two phases of hematite (Fe2O3) and cerium oxide CeO2. The cubic shape of nanoparticles is typical for spinel-type FeNbO4 structures, the phase contribution of which increases with increasing dopant concentration. It is shown that doping leads not only to a decrease in the concentration of manganese in model solutions, but also to an increase in the efficiency of adsorption from 11% to 75%.

Description: A common design concept of the piezoelectric force sensor, which is to assemble a bump structure from a flat or fine columnar piezoelectric structure or to use a specific type of electrode, is quite limited. In this paper, we propose a new design of cylindrical piezoelectric sensors that can detect multidirectional forces. The proposed sensor consists of four row and four column sensors. The design of the sensor was investigated by the finite element method. The response of the sensor to various force directions was observed, and it was demonstrated that the direction of the force applied to the sensor could be derived from the signals of one row sensor and three column sensors. As a result, this sensor proved to be able to detect forces in the area of 225° about the central axis of the sensor. In addition, a cylindrical sensor was fabricated to verify the proposed sensor and a series of experiments were performed. The simulation and experimental results were compared, and the actual sensor response tended to be similar to the simulation.

Description: Many human activities are tactile. Recognizing how a person touches an object or a surface surrounding them is an active area of research and it has generated keen interest within the interactive surface community. In this paper, we compare two machine learning techniques, namely Artificial Neural Network (ANN) and Hidden Markov Models (HMM), as they are some of the most common techniques with low computational cost used to classify an acoustic-based input. We employ a small and low-cost hardware design composed of a microphone, a stethoscope, a conditioning circuit, and a microcontroller. Together with an appropriate surface, we integrated these components into a passive gesture recognition input system for experimental evaluation. To perform the evaluation, we acquire the signals using a small microphone and send it through the microcontroller to MATLAB’s toolboxes to implement and evaluate the ANN and HMM models. We also present the hardware and software implementation and discuss the advantages and limitations of these techniques in gesture recognition while using a simple alphabet of three geometrical figures: circle, square, and triangle. The results validate the robustness of the HMM technique that achieved a success rate of 90%, with a shorter training time than the ANN.

Description: In recent years, field-effect transistors (FETs) have been very promising for biosensor applications due to their high sensitivity, real-time applicability, scalability, and prospect of integrating measurement system on a chip. Non-carbon 2D materials, such as transition metal dichalcogenides (TMDCs), hexagonal boron nitride (h-BN), black phosphorus (BP), and metal oxides, are a group of new materials that have a huge potential in FET biosensor applications. In this work, we review the recent advances and remarkable studies of non-carbon 2D materials, in terms of their structures, preparations, properties and FET biosensor applications. We will also discuss the challenges facing non-carbon 2D materials-FET biosensors and their future perspectives.

Description: Siamese network-based trackers consider tracking as features cross-correlation between the target template and the search region. Therefore, feature representation plays an important role for constructing a high-performance tracker. However, all existing Siamese networks extract the deep but low-resolution features of the entire patch, which is not robust enough to estimate the target bounding box accurately. In this work, to address this issue, we propose a novel high-resolution Siamese network, which connects the high-to-low resolution convolution streams in parallel as well as repeatedly exchanges the information across resolutions to maintain high-resolution representations. The resulting representation is semantically richer and spatially more precise by a simple yet effective multi-scale feature fusion strategy. Moreover, we exploit attention mechanisms to learn object-aware masks for adaptive feature refinement, and use deformable convolution to handle complex geometric transformations. This makes the target more discriminative against distractors and background. Without bells and whistles, extensive experiments on popular tracking benchmarks containing OTB100, UAV123, VOT2018 and LaSOT demonstrate that the proposed tracker achieves state-of-the-art performance and runs in real time, confirming its efficiency and effectiveness.

Description: The Internet of Medical Things (IoMT) couples IoT technologies with healthcare services in order to support real-time, remote patient monitoring and treatment. However, the interconnectivity of critical medical devices with other systems in various network layers creates new opportunities for remote adversaries. Since most of the communication protocols have not been specifically designed for the needs of connected medical devices, there is a need to classify the available IoT communication technologies in terms of security. In this paper we classify IoT communication protocols, with respect to their application in IoMT. Then we describe the main characteristics of IoT communication protocols used at the perception, network and application layer of medical devices. We examine the inherent security characteristics and limitations of IoMT-specific communication protocols. Based on realistic attacks we identify available mitigation controls that may be applied to secure IoMT communications, as well as existing research and implementation gaps.

Description: Monitoring biomass of forages in experimental plots and livestock farms is a time-consuming, expensive, and biased task. Thus, non-destructive, accurate, precise, and quick phenotyping strategies for biomass yield are needed. To promote high-throughput phenotyping in forages, we propose and evaluate the use of deep learning-based methods and UAV (Unmanned Aerial Vehicle)-based RGB images to estimate the value of biomass yield by different genotypes of the forage grass species Panicum maximum Jacq. Experiments were conducted in the Brazilian Cerrado with 110 genotypes with three replications, totaling 330 plots. Two regression models based on Convolutional Neural Networks (CNNs) named AlexNet and ResNet18 were evaluated, and compared to VGGNet—adopted in previous work in the same thematic for other grass species. The predictions returned by the models reached a correlation of 0.88 and a mean absolute error of 12.98% using AlexNet considering pre-training and data augmentation. This proposal may contribute to forage biomass estimation in breeding populations and livestock areas, as well as to reduce the labor in the field.

Description: Bioelectrocatalysis provides the intrinsic catalytic functions of redox enzymes to nonspecific electrode reactions and is the most important and basic concept for electrochemical biosensors. This review starts by describing fundamental characteristics of bioelectrocatalytic reactions in mediated and direct electron transfer types from a theoretical viewpoint and summarizes amperometric biosensors based on multi-enzymatic cascades and for multianalyte detection. The review also introduces prospective aspects of two new concepts of biosensors: mass-transfer-controlled (pseudo)steady-state amperometry at microelectrodes with enhanced enzymatic activity without calibration curves and potentiometric coulometry at enzyme/mediator-immobilized biosensors for absolute determination.

Description: Physical rehabilitation therapies for children present a challenge, and its success—the improvement of the patient’s condition—depends on many factors, such as the patient’s attitude and motivation, the correct execution of the exercises prescribed by the specialist or his progressive recovery during the therapy. With the aim to increase the benefits of these therapies, social humanoid robots with a friendly aspect represent a promising tool not only to boost the interaction with the pediatric patient, but also to assist physicians in their work. To achieve both goals, it is essential to monitor in detail the patient’s condition, trying to generate user profile models which enhance the feedback with both the system and the specialist. This paper describes how the project NAOTherapist—a robotic architecture for rehabilitation with social robots—has been upgraded in order to include a monitoring system able to generate user profile models through the interaction with the patient, performing user-adapted therapies. Furthermore, the system has been improved by integrating a machine learning algorithm which recognizes the pose adopted by the patient and by adding a clinical reports generation system based on the QUEST metric.

Description: The Karlsruhe Tritium Neutrino (KATRIN) experiment aims at measuring the effective electron neutrino mass with a sensitivity of 0.2 eV/c2, i.e., improving on previous measurements by an order of magnitude. Neutrino mass data taking with KATRIN commenced in early 2019, and after only a few weeks of data recording, analysis of these data showed the success of KATRIN, improving on the known neutrino mass limit by a factor of about two. This success very much could be ascribed to the fact that most of the system components met, or even surpassed, the required specifications during long-term operation. Here, we report on the performance of the laser Raman (LARA) monitoring system which provides continuous high-precision information on the gas composition injected into the experiment’s windowless gaseous tritium source (WGTS), specifically on its isotopic purity of tritium—one of the key parameters required in the derivation of the electron neutrino mass. The concentrations cx for all six hydrogen isotopologues were monitored simultaneously, with a measurement precision for individual components of the order 10−3 or better throughout the complete KATRIN data taking campaigns to date. From these, the tritium purity, εT, is derived with precision of

Description: In this paper, we present a navigation strategy exclusively designed for social robots with limited sensors for applications in homes. The overall system integrates a reactive design based on subsumption architecture and a knowledge system with learning capabilities. The component of the system includes several modules, such as doorway detection and room localization via convolutional neural network (CNN), avoiding obstacles via reinforcement learning, passing the doorway via Canny edge’s detection, building an abstract map called a Directional Semantic Topological Map (DST-Map) within the knowledge system, and other predefined layers within the subsumption architecture. The individual modules and the overall system are evaluated in a virtual environment using Webots simulator.

Description: In multi-target tracking scenarios with dense and heterogeneous clutter, there is a substantial increase in the false measurements that originated from the clutter within the validation gate, and consequently, the number of measurement-to-track association hypothesis grows rapidly in traditional multiple hypothesis tracker (MHT), leading to a sharp decrease in data association accuracy and tracking performance. A new multiple hypothesis tracker using validation gate with motion direction constraint (MHT-MDC) is proposed to solve these problems. In the MHT-MDC, a motion direction constraint (MDC) gate is designed by considering the prior target maneuvering information, which effectively reduces the volume of validation gate and, thus, diminishes the number of false measurements in the gate when the innovation covariance is large. Subsequently, the clutter density in the MDC gate is adaptively estimated by the conditional mean estimator of clutter density (CMECD), based on which the score functions in the MDC gate can be calculated. The MHT-MDC is compared with the MHT algorithm in simulations, and the experimental results demonstrate its superior tracking performance for weakly maneuvering targets in high clutter density scenarios.

Description: Over the last decade, video surveillance systems have become a part of the Internet of Things (IoT). These IP-based surveillance systems now protect industrial facilities, railways, gas stations, and even one’s own home. Unfortunately, like other IoT systems, there are inherent security risks which can lead to significant violations of a user’s privacy. In this review, we explore the attack surface of modern surveillance systems and enumerate the various ways they can be compromised with real examples. We also identify the threat agents, their attack goals, attack vectors, and the resulting consequences of successful attacks. Finally, we present current countermeasures and best practices and discuss the threat horizon. The purpose of this review is to provide researchers and engineers with a better understanding of a modern surveillance systems’ security, to harden existing systems and develop improved security solutions.

Description: The work investigates the application of artificial neural networks and logistic regression for the recognition of activities performed by room occupants. KNX (Konnex) standard-based devices were selected for smart home automation and data collection. The obtained data from these devices (Humidity, CO2, temperature) were used in combination with two wearable gadgets to classify specific activities performed by the room occupant. The obtained classifications can benefit the occupant by monitoring the wellbeing of elderly residents and providing optimal air quality and temperature by utilizing heating, ventilation, and air conditioning control. The obtained results yield accurate classification.

Description: The intrinsic heterogeneity property of concrete causes strong multiple scatterings during wave propagation, forming coda wave that follows very complex trajectories. As a superposition of multiply scattered waves, coda wave shows great sensitivity to subtle changes, but meanwhile lose spatial resolution. To make use of its sensitivity and turn the limitation into advantage, this paper presents an experimental study of three-dimensionally imaging local changes in concrete by application of inverse algorithms to coda wave measurements. Load tests are performed on a large reinforced concrete beam that contains multiple pre-existing millimeter-scale cracks in order to match real life situation. The joint effects of cracks and stresses on coda waves have been monitored using a network of fixed transducers placed at the surface. The global waveform decorrelations and velocity variations are firstly quantified through coda wave interferometry technique. Subsequently, two inverse algorithms are independently applied to map the densities of changes at each localized position. Using this methodology, the stress changes and subtle cracks in the concrete beam are detected and imaged for both temporal and spatial domains.

Description: The heat-exchanger/reactor (HEX reactor) is a kind of plug-flow chemical reactor which combines high heat transfer ability with good chemical performances. It was designed under the popular trend of process intensification in chemical engineering. Previous studies have investigated its characteristics and developed its nominal model. This paper is concerned with its fault tolerant control (FTC) applications. To avoid the difficulties and nonlinearities of this HEX reactor under chemical reactions, a two-layer, multiple-model structure is proposed for designing the FTC scheme. The first layer focuses on representing the nonlinear system with a bank of local linear models while the second layer uses model banks for approaching faulty situations. Model banks are achieved by system identification, and the corresponding controller banks are designed using model predictive control (MPC). The unscented Kalman filter (UKF) is introduced to estimate the states and form the fault detection and isolation (FDI) section. Finally, the FTC simulation and validation results are presented. The idea of a two-layer, multiple-model structure presents a general framework for FTC design of complex and highly nonlinear systems, such as the HEX reactor, whose mathematical model has been created. It implements the design process in an unusual way and is also worth trying on other cases.

Description: The range of applications of electromyography-based gesture recognition has increased over the last years. A common problem regularly encountered in literature is the inadequate data availability. Data augmentation, which aims at generating new synthetic data from the existing ones, is the most common approach to deal with this data shortage in other research domains. In the case of surface electromyography (sEMG) signals, there is limited research in augmentation methods and quite regularly the results differ between available studies. In this work, we provide a detailed evaluation of existing (i.e., additive noise, overlapping windows) and novel (i.e., magnitude warping, wavelet decomposition, synthetic sEMG models) strategies of data augmentation for electromyography signals. A set of metrics (i.e., classification accuracy, silhouette score, and Davies–Bouldin index) and visualizations help with the assessment and provides insights about their performance. Methods like signal magnitude warping and wavelet decomposition yield considerable increase (up to 16%) in classification accuracy across two benchmark datasets. Particularly, a significant improvement of 1% in the classification accuracy of the state-of-the-art model in hand gesture recognition is achieved.

Description: Emotion recognition has been gaining attention in recent years due to its applications on artificial agents. To achieve a good performance with this task, much research has been conducted on the multi-modality emotion recognition model for leveraging the different strengths of each modality. However, a research question remains: what exactly is the most appropriate way to fuse the information from different modalities? In this paper, we proposed audio sample augmentation and an emotion-oriented encoder-decoder to improve the performance of emotion recognition and discussed an inter-modality, decision-level fusion method based on a graph attention network (GAT). Compared to the baseline, our model improved the weighted average F1-scores from 64.18 to 68.31% and the weighted average accuracy from 65.25 to 69.88%.

Description: In recent years, a series of matching pursuit and hard thresholding algorithms have been proposed to solve the sparse representation problem with ℓ0-norm constraint. In addition, some stochastic hard thresholding methods were also proposed, such as stochastic gradient hard thresholding (SG-HT) and stochastic variance reduced gradient hard thresholding (SVRGHT). However, each iteration of all the algorithms requires one hard thresholding operation, which leads to a high per-iteration complexity and slow convergence, especially for high-dimensional problems. To address this issue, we propose a new stochastic recursive gradient support pursuit (SRGSP) algorithm, in which only one hard thresholding operation is required in each outer-iteration. Thus, SRGSP has a significantly lower computational complexity than existing methods such as SG-HT and SVRGHT. Moreover, we also provide the convergence analysis of SRGSP, which shows that SRGSP attains a linear convergence rate. Our experimental results on large-scale synthetic and real-world datasets verify that SRGSP outperforms state-of-the-art related methods for tackling various sparse representation problems. Moreover, we conduct many experiments on two real-world sparse representation applications such as image denoising and face recognition, and all the results also validate that our SRGSP algorithm obtains much better performance than other sparse representation learning optimization methods in terms of PSNR and recognition rates.

Description: At present, the state-of-the-art approaches of Visual Question Answering (VQA) mainly use the co-attention model to relate each visual object with text objects, which can achieve the coarse interactions between multimodalities. However, they ignore the dense self-attention within question modality. In order to solve this problem and improve the accuracy of VQA tasks, in the present paper, an effective Dense Co-Attention Networks (DCAN) is proposed. First, to better capture the relationship between words that are relatively far apart and make the extracted semantics more robust, the Bidirectional Long Short-Term Memory (Bi-LSTM) neural network is introduced to encode questions and answers; second, to realize the fine-grained interactions between the question words and image regions, a dense multimodal co-attention model is proposed. The model’s basic components include the self-attention unit and the guided-attention unit, which are cascaded in depth to form a hierarchical structure. The experimental results on the VQA-v2 dataset show that DCAN has obvious performance advantages, which makes VQA applicable to a wider range of AI scenarios.

Description: Present-day science indicates that developing sensors with excellent sensitivity and selectivity for detecting early signs of diseases is highly desirable. Electrochemical sensors offer a method for detecting diseases that are simpler, faster, and more accurate than conventional laboratory analysis methods. Primarily, exploiting non-noble-metal nanomaterials with excellent conductivity and large surface area is still an area of active research due to its highly sensitive and selective catalysts for electrochemical detection in enzyme-free sensors. In this research, we successfully fabricate Metal-Organic Framework (MOF) FeBDC-derived Fe3O4 for non-enzymatic electrochemical detection of glucose. FeBDC synthesis was carried out using the solvothermal method. FeCl2.4H2O and Benzene-1,4-dicarboxylic acid (H2BDC) are used as precursors to form FeBDC. The materials were further characterized utilizing X-ray Powder Diffraction (XRD), Scanning Electron Microscopy (SEM), and Fourier-Transform Infrared Spectroscopy (FTIR). The resulting MOF yields good crystallinity and micro-rod like morphology. Electrochemical properties were tested using Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV) with a 0.1 M of Phosphate Buffer Saline (PBS pH 7.4) solution as the supporting electrolyte. The measurement results show the reduction and oxidation peaks in the CV curve of FeBDC, as well as Fe3O4. Pyrolysis of FeBDC to Fe3O4 increases the peak of oxidation and reduction currents. The Fe3O4 sample obtained has a sensitivity of 4.67 µA mM−1.cm−2, a linear range between 0.0 to 9.0 mM, and a glucose detection limit of 15.70 µM.

Description: In this work, we present a network architecture with parallel convolutional neural networks (CNN) for removing perspective distortion in images. While other works generate corrected images through the use of generative adversarial networks or encoder-decoder networks, we propose a method wherein three CNNs are trained in parallel, to predict a certain element pair in the 3×3 transformation matrix, M^. The corrected image is produced by transforming the distorted input image using M^−1. The networks are trained from our generated distorted image dataset using KITTI images. Experimental results show promise in this approach, as our method is capable of correcting perspective distortions on images and outperforms other state-of-the-art methods. Our method also recovers the intended scale and proportion of the image, which is not observed in other works.

Description: Children with autistic spectrum disorder (ASD) often exhibit uncontrollable disruptive behaviour during transfer to the operating room and operating table and at the induction of anaesthesia (sleep). This process often involves the physical restraining of children. These children are then lifted onto the operating table by healthcare staff after being anaesthetized. This predisposes children to fall risk and hospital staff to musculoskeletal injuries. We developed two concept mobility devices, IMOVE-I and -II, based on robotics systems comprising of restraint modules and multi-positional modality (sitting, supine, Trendelenburg). The aim was to intuitively secure children to facilitate the safe induction of sleep and ease of transfer onto operating tables upon sleep. IMOVE-I loads the child in standing position using a dual arm restraint module that is activated by trained healthcare staff. IMOVE-II loads the child in the sitting position by motivating the self-application of restraints. Opinions were obtained from 21 operating theatre healthcare staff with experience in the care of ASD children and parents with ASD children. The mean satisfaction rating of IMOVE-I was 5.62 (95% CI 5.00, 6.27) versus 8.10 (95% CI 7.64, 8.55) in IMOVE-II, p 〈 0.001. IMOVE-II is favoured over IMOVE-I in system operation and safety, ease of use and module functionality.

Description: Surface electromyogram (EMG) is a noninvasive measure of muscle electrical activity and has been widely used in a variety of applications. When recorded from the trunk, surface EMG can be contaminated by the cardiac electrical activity, i.e., the electrocardiogram (ECG). ECG may distort the desired EMG signal, complicating the extraction of reliable information from the trunk EMG. Several methods are available for ECG removal from the trunk EMG, but a comparative assessment of the performance of these methods is lacking, limiting the possibility of selecting a suitable method for specific applications. The aim of the present study is therefore to review and compare the performance of different ECG removal methods from the trunk EMG. To this end, a synthetic dataset was generated by combining in vivo EMG signals recorded on the biceps brachii and healthy or dysrhythmia ECG data from the Physionet database with a predefined signal-to-noise ratio. Gating, high-pass filtering, template subtraction, wavelet transform, adaptive filtering, and blind source separation were implemented for ECG removal. A robust measure of Kurtosis, i.e., KR2 and two EMG features, the average rectified value (ARV), and mean frequency (MF), were then calculated from the processed EMG signals and compared with the EMG before mixing. Our results indicate template subtraction to produce the lowest root mean square error in both ARV and MF, providing useful insight for the selection of a suitable ECG removal method.

Description: In recent years, industrial production has become more and more automated. Machine cutting tool as an important part of industrial production have a large impact on the production efficiency and costs of products. In a real manufacturing process, tool breakage often occurs in an instant without warning, which results a extremely unbalanced ratio of the tool breakage samples to the normal ones. In this case, the traditional supervised learning model can not fit the sample of tool breakage well, which results to inaccurate prediction of tool breakage. In this paper, we use the high precision Hall sensor to collect spindle current data of computer numerical control (CNC). Combining the anomaly detection and deep learning methods, we propose a simple and novel method called CNN-AD to solve the class-imbalance problem in tool breakage prediction. Compared with other prediction algorithms, the proposed method can converge faster and has better accuracy.

Description: In this article, we present a new method of dehazing based on the Koschmieder model, which aims to restore an image that has been affected by haze. The difficulty is to improve the estimation of the transmission and the atmospheric light that generally suffer from the nonhomogeneity and the random variability of the environment. The keypoint is to enhance the dehazing of very bright regions of the image in order to improve the treatment of the sky that is often overestimated or underestimated compared to the rest of the scene. The approach proposed in this paper is based on two main contributions: 1. an L0 gradient optimization function weighted by a set of Gaussian filters and based on an iterative algorithm for optimization convergence. Unlike the existing methods using a single value of the atmospheric light for the whole image, our method uses a set of values neighboring an initial estimated value. The fusion is then applied based on Laplacian and Gaussian pyramids to combine all the relevant information from the set of images constructed from atmospheric lights and improves the contrast to recover the colors of the sky without any artifacts. Finally, the results are validated by three criteria: an autocorrelation score (ZNCC), a similarity measure (SSIM) and a visual criterion. The experiments carried out on two datasets show that our approach allows a better dehazing of the images with higher SSIM and ZNCC measurements but also with better visual quality.

Description: As aging populations continue to grow, primarily in developed countries, there are increasing demands for the system that monitors the activities of elderly people while continuing to allow them to pursue their individual, healthy, and independent lifestyles. Therefore, it is required to develop the activity of daily living (ADL) sensing systems that are based on high-performance sensors and information technologies. However, most of the systems that have been proposed to date have only been investigated and/or evaluated in experimental environments. When considering the spread of such systems to typical homes inhabited by elderly people, it is clear that such sensing systems will need to meet the following five requirements: (1) be inexpensive; (2) provide robustness; (3) protect privacy; (4) be maintenance-free; and, (5) work with a simple user interface. In this paper, we propose a novel senior-friendly ADL sensing system that can fulfill these requirements. More specifically, we achieve an easy collection of ADL data from elderly people while using a proposed system that consists of a small number of inexpensive energy harvesting sensors and simple annotation buttons, without the need for privacy-invasive cameras or microphones. In order to evaluate the practicality of our proposed system, we installed it in ten typical homes with elderly residents and collected the ADL data over a two-month period. We then visualized the collected data and performed activity recognition using a long short-term memory (LSTM) model. From the collected results, we confirmed that our proposed system, which is inexpensive and non-invasive, can correctly collect resident ADL data and could recognize activities from the collected data with a high recall rate of 72.3% on average. This result shows a high potential of our proposed system for application to services for elderly people.

Description: The Internet of Things (IoT) is an industry-recognized next intelligent life solution that increases the level of comfort, efficiency, and automation for citizens through numerous sensors, smart devices, and cloud stations connected physically. As an important application scenario of IoT, the Internet of Vehicles (IoV) plays an extremely critical role in the intelligent transportation field. In fact, the In-Vehicle Network of smart vehicles that are recognized as the core roles in intelligent transportation is currently the Controller Area Network (CAN). However, the In-Vehicle CAN bus protocol has several vulnerabilities without any encryption, authentication, or integrity checking, which severely threatens the safety of drivers and passengers. Once malicious attackers hack the vehicular gateway and obtain the access right of the CAN, they may control the vehicle based on the vulnerabilities of the CAN bus protocol. Given the severe security risk of CAN, we proposed the CANsec, a practical In-Vehicle CAN security evaluation tool that simulates malicious attacks according to major attack models to evaluate the security risk of the In-Vehicle CAN. We also show a usage case of the CANsec without knowing any information from the vehicle manufacturer.

Description: The instrument transformers scenario is moving towards the adoption of a new generation of low-power instrument transformers. This disruptive change also requires that the modeling, characterization, and testing of those devices must be improved. Therefore, this study focuses on a smart approach developed by the authors in a previous study to estimate the output of low-power voltage transformers (LPVT). The approach—which is based on a sort of modeling in the frequency domain (the so-called sinc-response)—allows obtaining the behavior of the LPVT at rated and distorted conditions. Experimental tests performed on off-the-shelf devices confirm the applicability and effectiveness of the proposed approach when estimating the output response of LPVTs.

Description: The main factors influencing the shape of the beach, shoreline and seabed include undulation, wind and coastal currents. These phenomena cause continuous and multidimensional changes in the shape of the seabed and the Earth’s surface, and when they occur in an area of intense human activity, they should be constantly monitored. In 2018 and 2019, several measurement campaigns took place in the littoral zone in Sopot, related to the intensive uplift of the seabed and beach caused by the tombolo phenomenon. In this research, a unique combination of bathymetric data obtained from an unmanned surface vessel, photogrammetric data obtained from unmanned aerial vehicles and ground laser scanning were used, along with geodetic data from precision measurements with receivers of global satellite navigation systems. This paper comprehensively presents photogrammetric measurements made from unmanned aerial vehicles during these campaigns. It describes in detail the problems in reconstruction within the water areas, analyses the accuracy of various photogrammetric measurement techniques, proposes a statistical method of data filtration and presents the changes that occurred within the studies area. The work ends with an interpretation of the causes of changes in the land part of the littoral zone and a summary of the obtained results.

Description: With the development of flexible electronic materials, as well as the wide development and application of smartphones, the cloud, and wireless systems, flexible wearable sensor technology has a significant and far-reaching impact on the realization of personalized medical care and the reform of the consumer market in the future. However, due to the high requirements for accuracy, reliability, low power consumption, and less data error, the development of these potential areas is full of challenges. In order to solve these problems, this review mainly searches the literature from 2008 to May 2020, based on the PRISMA process. Based on them, this paper reviews the latest research progress of new flexible materials and different types of sensors for monitoring vital signs (including electrophysiological signals, body temperature, and respiratory frequency) in recent years. These materials and sensors can help realize accurate signal detection based on comfortable and sustainable observation, and may likely be applied to future daily clothing.

Description: The advances of the Internet of Things, robotics, and Artificial Intelligence, to give just a few examples, allow us to imagine promising results in the development of smart buildings in the near future. In the particular case of elderly care, there are new solutions that integrate systems that monitor variables associated with the health of each user or systems that facilitate physical or cognitive rehabilitation. In all these solutions, it is clear that these new environments, usually called Ambient Assisted Living (AAL), configure a Cyber-Physical System (CPS) that connects information from the physical world to the cyber-world with the primary objective of adding more intelligence to these environments. This article presents a CPS-AAL for caregiving centers, with the main novelty that includes a Socially Assistive Robot (SAR). The CPS-AAL presented in this work uses a digital twin world with the information acquired by all devices. The basis of this digital twin world is the CORTEX cognitive architecture, a set of software agents interacting through a Deep State Representation (DSR) that stored the shared information between them. The proposal is evaluated in a simulated environment with two use cases requiring interaction between the sensors and the SAR in a simulated caregiving center.

Description: Gait is a characteristic that has been utilized for identifying individuals. As human gait information is now able to be captured by several types of devices, many studies have proposed biometric identification methods using gait information. As research continues, the performance of this technology in terms of identification accuracy has been improved by gathering information from multi-modal sensors. However, in past studies, gait information was collected using ancillary devices while the identification accuracy was not high enough for biometric identification. In this study, we propose a deep learning-based biometric model to identify people by their gait information collected through a wearable device, namely an insole. The identification accuracy of the proposed model when utilizing multi-modal sensing is over 99%.

Description: With the Internet of Things (IoT), the number of monitoring applications deployed is considerably increasing, whatever the field considered: smart city, smart agriculture, environment monitoring, air pollution monitoring, to name a few. The LoRaWAN (Long Range Wide Area Network)architecture with its long range communication, its robustness to interference and its reduced energy consumption is an excellent candidate to support such applications. However, if the number of end devices is high, the reliability of LoRaWAN, measured by the Packet Delivery Ratio (PDR), becomes unacceptable due to an excessive number of collisions. In this paper, we propose two different families of solutions ensuring collision-free transmissions. The first family is TDMA (Time-Division Multiple Access)-based. All clusters transmit in sequence and up to six end devices with different spreading factors belonging to the same cluster are allowed to transmit in parallel. The second family is FDMA (Frequency Divsion Multiple Access)-based. All clusters transmit in parallel, each cluster on its own frequency. Within each cluster, all end devices transmit in sequence. Their performance are compared in terms of PDR, energy consumption by end device and maximum number of end devices supported. Simulation results corroborate the theoretical results and show the high efficiency of the solutions proposed.

Description: Federated learning (FL) is a privacy-preserving technique for training a vast amount of decentralized data and making inferences on mobile devices. As a typical language modeling problem, mobile keyboard prediction aims at suggesting a probable next word or phrase and facilitating the human-machine interaction in a virtual keyboard of the smartphone or laptop. Mobile keyboard prediction with FL hopes to satisfy the growing demand that high-level data privacy be preserved in artificial intelligence applications even with the distributed models training. However, there are two major problems in the federated optimization for the prediction: (1) aggregating model parameters on the server-side and (2) reducing communication costs caused by model weights collection. To address the above issues, traditional FL methods simply use averaging aggregation or ignore communication costs. We propose a novel Federated Mediation (FedMed) framework with the adaptive aggregation, mediation incentive scheme, and topK strategy to address the model aggregation and communication costs. The performance is evaluated in terms of perplexity and communication rounds. Experiments are conducted on three datasets (i.e., Penn Treebank, WikiText-2, and Yelp) and the results demonstrate that our FedMed framework achieves robust performance and outperforms baseline approaches.

Description: We present analyses of Global Navigation Satellite System (GNSS) carrier phase observations in multiple kinematic scenarios for different receiver types. Multi-GNSS observations are recorded on high sensitivity and geodetic-grade receivers operating on a moving zero-baseline by conducting terrestrial urban and aerial flight experiments. The captured data is post-processed; carrier phase residuals are computed using the double difference (DD) concept. The estimated noise levels of carrier phases are analysed with respect to different parameters. We find DD noise levels for L1 carrier phase observations in the range of 1.4–2 mm (GPS, Global Positioning System), 2.8–4.6 mm (GLONASS, Global Navigation Satellite System), and 1.5–1.7 mm (Galileo) for geodetic receiver pairs. The noise level for high sensitivity receivers is at least higher by a factor of 2. For satellites elevating above 30 ∘ , the dominant noise process is white phase noise. For the flight experiment, the elevation dependency of the noise is well described by the exponential model, while for the terrestrial urban experiment, multipath and diffraction effects overlay; hence no elevation dependency is found. For both experiments, a carrier-to-noise density ratio (C/N 0 ) dependency for carrier phase DDs of GPS and Galileo is clearly visible with geodetic-grade receivers. In addition, C/N 0 dependency is also visible for carrier phase DDs of GLONASS with geodetic-grade receivers for the terrestrial urban experiment.

Description: Hemoglobinopathies represent the most common single-gene defects in the world and pose a major public health problem, particularly in tropical countries, where they occur with high frequency. Diagnosing hemoglobinopathies can sometimes be difficult due to the coexistence of different causes of anemia, such as thalassemia and iron deficiency, and blood transfusions, among other factors, and requires expensive and complex molecular tests. This work explores the possibility of using spectral confocal microscopy as a diagnostic tool for thalassemia in pediatric patients, a disease caused by mutations in the globin genes that result in changes of the globin chains that form hemoglobin—in pediatric patients. Red blood cells (RBCs) from patients with different syndromes of alpha-thalassemia and iron deficiency (including anemia) as well as healthy (control) subjects were analyzed under a Leica TCS SP8 confocal microscope following different image acquisition protocols. We found that diseased RBCs exhibited autofluorescence when excited at 405 nm and their emission was collected in the spectral range from 425 nm to 790 nm. Three experimental descriptors calculated from the mean emission intensities at 502 nm, 579 nm, 628 nm, and 649 nm allowed us to discriminate between diseased and healthy cells. According to the results obtained, spectral confocal microscopy could serve as a tool in the diagnosis of thalassemia.

Description: Collaborative representation (CR)-based classification has been successfully applied to plant disease recognition in cases with sufficient training samples of each disease. However, collecting enough training samples is usually time consuming and labor-intensive. Moreover, influenced by the non-ideal measurement environment, samples may be corrupted by variables introduced by bad illumination and occlusions of adjacent leaves. Consequently, an extended collaborative representation (ECR)-based classification model is presented in this paper. Then, it is applied to cucumber leaf disease recognition, which constructs a pure spectral library consisting of several representative samples for each disease and designs a universal variation spectral library that deals with linear variables superimposed on samples. Thus, each query sample is encoded as a linear combination of atoms from these two spectral libraries and disease identity is determined by the disease of minimal reconstruction residuals. Experiments are conducted on spectral curves extracted from normal leaves and the disease lesions of leaves infected with cucumber anthracnose and brown spot. The diagnostic accuracy is higher than 94.7% and the average online diagnosis time is short, about 1 to 1.3 ms. The results indicate that the ECR-based classification model is feasible in the fast and accurate diagnosis of cucumber leaf diseases.

Description: Photoacoustic imaging (PAI) combines optical contrast with ultrasound spatial resolution and can be obtained up to a depth of a few centimeters. Hand-held PAI systems using linear array usually operate in reflection mode using a dark-field illumination scheme, where the optical fiber output is attached to both sides of the elevation plane (short-axis) of the transducer. More recently, bright-field strategies where the optical illumination is coaxial with acoustic detection have been proposed to overcome some limitations of the standard dark-field approach. In this paper, a novel multiangle long-axis lateral illumination is proposed. Monte Carlo simulations were conducted to evaluate light delivery for three different illumination schemes: bright-field, standard dark-field, and long-axis lateral illumination. Long-axis lateral illumination showed remarkable improvement in light delivery for targets with a width smaller than the transducer lateral dimension. A prototype was developed to experimentally demonstrate the feasibility of the proposed approach. In this device, the fiber bundle terminal ends are attached to both sides of the transducer’s long-axis and the illumination angle of each fiber bundle can be independently controlled. The final PA image is obtained by the coherent sum of subframes acquired using different angles. The prototype was experimentally evaluated by taking images from a phantom, a mouse abdomen, forearm, and index finger of a volunteer. The system provided light delivery enhancement taking advantage of the geometry of the target, achieving sufficient signal-to-noise ratio at clinically relevant depths.

Description: Longitudinal and perpendicular changes in the vocal fold’s blood vessels are associated with the development of benign and malignant laryngeal lesions. The combination of Contact Endoscopy (CE) and Narrow Band Imaging (NBI) can provide intraoperative real-time visualization of the vascular changes in the laryngeal mucosa. However, the visual evaluation of vascular patterns in CE-NBI images is challenging and highly depends on the clinicians’ experience. The current study aims to evaluate and compare the performance of a manual and an automatic approach for laryngeal lesion’s classification based on vascular patterns in CE-NBI images. In the manual approach, six observers visually evaluated a series of CE+NBI images that belong to a patient and then classified the patient as benign or malignant. For the automatic classification, an algorithm based on characterizing the level of the vessel’s disorder in combination with four supervised classifiers was used to classify CE-NBI images. The results showed that the manual approach’s subjective evaluation could be reduced by using a computer-based approach. Moreover, the automatic approach showed the potential to work as an assistant system in case of disagreements among clinicians and to reduce the manual approach’s misclassification issue.

Description: Twenty-eight quartz crystal microbalance (QCM) sensors coated with different sensing films were tested and analyzed in this work; twenty-three sensors were coated in different room temperature ionic liquids (RTILs) and five additional QCM sensors were coated with conventional films commonly used as stationary phases in gas chromatography. Four volatile organic compounds (VOCs), in gaseous phase—hexanol, butyl acetate, 2-hexanone, and hexanoic acid—were measured. Two transducer mechanisms were used; resonant frequency shift and resistance shift of a QCM Mason equivalent circuit. The sensors were characterized by their sensitivity to the VOCs and their discrimination power of the four VOCs. The highest separation among VOCs was obtained when frequency and resistance information of both RTIL and conventional films was used, a sensor array composed by two RTILs (1-butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide and 1-hexyl-3-methylimidazolium hexafluorophosphate) and two conventional films (tricresyl phosphate and apiezon-L) was found to improve the Wilks lambda separation for the tested gases two orders of magnitude compared to the Wilks lambda using only a conventional films array.

Description: Emotion recognition has increased the potential of affective computing by getting an instant feedback from users and thereby, have a better understanding of their behavior. Physiological sensors have been used to recognize human emotions in response to audio and video content that engages single (auditory) and multiple (two: auditory and vision) human senses, respectively. In this study, human emotions were recognized using physiological signals observed in response to tactile enhanced multimedia content that engages three (tactile, vision, and auditory) human senses. The aim was to give users an enhanced real-world sensation while engaging with multimedia content. To this end, four videos were selected and synchronized with an electric fan and a heater, based on timestamps within the scenes, to generate tactile enhanced content with cold and hot air effect respectively. Physiological signals, i.e., electroencephalography (EEG), photoplethysmography (PPG), and galvanic skin response (GSR) were recorded using commercially available sensors, while experiencing these tactile enhanced videos. The precision of the acquired physiological signals (including EEG, PPG, and GSR) is enhanced using pre-processing with a Savitzky-Golay smoothing filter. Frequency domain features (rational asymmetry, differential asymmetry, and correlation) from EEG, time domain features (variance, entropy, kurtosis, and skewness) from GSR, heart rate and heart rate variability from PPG data are extracted. The K nearest neighbor classifier is applied to the extracted features to classify four (happy, relaxed, angry, and sad) emotions. Our experimental results show that among individual modalities, PPG-based features gives the highest accuracy of 78.57 % as compared to EEG- and GSR-based features. The fusion of EEG, GSR, and PPG features further improved the classification accuracy to 79.76 % (for four emotions) when interacting with tactile enhanced multimedia.

Description: Individual spacecraft manual navigation by human operators from ground station is expected to be an emerging problem as the number of spacecraft for space exploration increases. Hence, as an attempt to reduce the burden to control multiple spacecraft, future missions will employ smart spacecraft able to navigate and operate autonomously. Recently, image-based optical navigation systems have proved to be promising solutions for inexpensive autonomous navigation. In this paper, we propose a robust image processing pipeline for estimating the center and radius of planets and moons in an image taken by an on-board camera. Our custom image pre-processing pipeline is tailored for resource-constrained applications, as it features a computationally simple processing flow with a limited memory footprint. The core of the proposed pipeline is a best-fitting model based on the RANSAC algorithm that is able to handle images corrupted with Gaussian noise, image distortions, and frame drops. We report processing time, pixel-level error of estimated body center and radius and the effect of noise on estimated body parameters for a dataset of synthetic images.

Description: Region of interest (ROI) localization is one of the key preprocessing technologies for a finger-vein identification system, so an effective ROI definition can improve the matching accuracy. However, due to the impact of uneven illumination, equipment noise, as well as the distortion of finger position, etc., these make accurate ROI localization a very difficult task. To address these issues, in this paper, we propose a robust finger-vein ROI localization method, which is based on the 3 σ criterion dynamic threshold strategy. The proposed method includes three main steps: First, the Kirsch edge detector is introduced to detect the horizontal-like edges in the acquired finger-vein image. Then, the obtained edge gradient image is divided into four parts: upper-left, upper-right, lower-left, and lower-right. For each part of the image, the three-level dynamic threshold, which is based on the 3 σ criterion of the normal distribution, is imposed to obtain more distinct and complete edge information. Finally, through labeling the longest connected component at the same horizontal line, two reliable finger boundaries, which represent the upper and lower boundaries, respectively, are defined, and the ROI is localized in the region between these two boundaries. Extensive experiments are carried out on four different finger-vein image datasets, including three publicly available datasets and one of our newly developed finger-vein datasets with 37,080 finger-vein samples and 1030 individuals. The experimental results indicate that our proposed method has very competitive ROI localization performance, as well as satisfactory matching results on different datasets.

Description: Thermal inspection is a powerful tool that enables the diagnosis of several components at its early stages. One critical aspect that influences thermal inspection outputs is the infrared reflection from external sources. This situation may change the readings, demanding that an expert correctly define the camera position, which is a time consuming and expensive operation. To mitigate this problem, this work proposes an autonomous system capable of identifying infrared reflections by filtering and fusing data obtained from both stereo and thermal cameras. The process starts by acquiring readings from multiples Observation Points (OPs) where, at each OP, the system processes the 3D point cloud and thermal image by fusing them together. The result is a dense point cloud where each point has its spatial position and temperature. Considering that each point’s information is acquired from multiple poses, it is possible to generate a temperature profile of each spatial point and filter undesirable readings caused by interference and other phenomena. To deploy and test this approach, a Directional Robotic System (DRS) is mounted over a traditional human-operated service vehicle. In that way, the DRS autonomously tracks and inspects any desirable equipment as the service vehicle passes them by. To demonstrate the results, this work presents the algorithm workflow, a proof of concept, and a real application result, showing improved performance in real-life conditions.

Description: Surface electromyographic signal (sEMG) is a kind of bioelectrical signal, which records the data of muscle activity intensity. Most sEMG-based hand gesture recognition, which uses machine learning as the classifier, depends on feature extraction of sEMG data. Recently, a deep leaning-based approach such as recurrent neural network (RNN) has provided a choice to automatically learn features from raw data. This paper presents a novel hand gesture prediction method by using an RNN model to learn from raw sEMG data and predict gestures. The sEMG signals of 21 short-term hand gestures of 13 subjects were recorded with a Myo armband, which is a non-intrusive, low cost, commercial portable device. At the start of the gesture, the trained model outputs an instantaneous prediction for the sEMG data. Experimental results showed that the more time steps of data that were known, the higher instantaneous prediction accuracy the proposed model gave. The predicted accuracy reached about 89.6% when the data of 40-time steps (200 ms) were used to predict hand gesture. This means that the gesture could be predicted with a delay of 200 ms after the hand starts to perform the gesture, instead of waiting for the end of the gesture.

Description: The reporting of U wave abnormalities is clinically important, but the measurement of this small electrocardiographic (ECG) feature is extremely difficult, especially in challenging recording conditions, such as stress exercise, due to contaminating noise. Furthermore, it is widely stated that ECG U waves are rarely observable at heart rates greater than 90 bpm. The aims of the study were (i) to assess the ability of multi-beat averaging to reveal the presence of U waves in ECGs contaminated by noise following exercise and (ii) to quantify the effect of exercise on U wave amplitude. The multi-beat averaging algorithm was applied to recover U waves in 20 healthy subjects in pre- and post-exercise recordings. Average beats were generated from 30 beat epochs. The prevalence of U waves and their amplitudes were measured in pre- and post-exercise recordings and changes in amplitude due to exercise were quantified. U waves were present in all subjects in pre-exercise recordings. Following exercise, U waves could not be seen in standard ECG but were observable in all 20 subjects by multi-beat averaging and despite significantly increased mean (±SD) heart rate (63 ± 8 bpm vs. 100 ± 9 bpm, p 〈 0.0001). Furthermore, U waves were observable in all subjects with heart rates greater than 90 bpm. U waves significantly increased in amplitude following exercise (38 ± 15 μV vs. 80 ± 48 μV, p = 0.0005). Multi-beat averaging is effective at recovering U waves contaminated by noise due to exercise. U waves were measurable in all subjects, dispelling the myth that U waves are rarely seen at elevated heart rates. U waves exhibit increased amplitudes at elevated heart rates following exercise.

Description: Real-time monitoring of fruit ripeness in storage and during logistics allows traders to minimize the chances of financial losses and maximize the quality of the fruit during storage through accurate prediction of the present condition of fruits. In Pakistan, banana production faces different difficulties from production, post-harvest management, and trade marketing due to atmosphere and mismanagement in storage containers. In recent research development, Wireless Sensor Networks (WSNs) are progressively under investigation in the field of fruit ripening due to their remote monitoring capability. Focused on fruit ripening monitoring, this paper demonstrates an Xbee-based wireless sensor nodes network. The role of the network architecture of the Xbee sensor node and sink end-node is discussed in detail regarding their ability to monitor the condition of all the required diagnosis parameters and stages of banana ripening. Furthermore, different features are extracted using the gas sensor, which is based on diverse values. These features are utilized for training in the Artificial Neural Network (ANN) through the Back Propagation (BP) algorithm for further data validation. The experimental results demonstrate that the projected WSN architecture can identify the banana condition in the storage area. The proposed Neural Network (NN) architectural design works well with selecting the feature data sets. It seems that the experimental and simulation outcomes and accuracy in banana ripening condition monitoring in the given feature vectors is attained and acceptable, through the classification performance, to make a better decision for effective monitoring of current fruit condition.

Description: The visual fidelity of a virtual environment lacks the exceedingly complex layers from the physical world, but the continuous improvements of image rendering technology and computation powers have led to greater demands for virtual simulations. Our study employs Crime Prevention through Environmental Design (CPTED) as a risk control measure and utilizes two principles: Access Control and Natural Surveillance. We conducted an experiment with (n-sample: 100) graduate students. For the experiment, we utilized the Factor Analysis of Information Risk (FAIR) to quantitatively analyze the risk. Furthermore, we adopted the lme4 package for R to estimate the mixed effect of the 6,242,880 observations retrieved from Kaggle. Based on the two experiments, we were able to critically evaluate the contributions of CPTED through a multi-component analysis. Our study investigates how spatial syntax and territorial demarcation may translate in the cyberspace realm. We found that the corollaries of the mophology in the virtual environment effects the distribution of crime. The results of our study discusses how to determine the criminogenic designs and capacity in the cyberspace realm.

Description: This research aims to improve dietetic-nutritional treatment using state-of-the-art RGB-D sensors and virtual reality (VR) technology. Recent studies show that adherence to treatment can be improved using multimedia technologies. However, there are few studies using 3D data and VR technologies for this purpose. On the other hand, obtaining 3D measurements of the human body and analyzing them over time (4D) in patients undergoing dietary treatment is a challenging field. The main contribution of the work is to provide a framework to study the effect of 4D body model visualization on adherence to obesity treatment. The system can obtain a complete 3D model of a body using low-cost technology, allowing future straightforward transference with sufficient accuracy and realistic visualization, enabling the analysis of the evolution (4D) of the shape during the treatment of obesity. The 3D body models will be used for studying the effect of visualization on adherence to obesity treatment using 2D and VR devices. Moreover, we will use the acquired 3D models to obtain measurements of the body. An analysis of the accuracy of the proposed methods for obtaining measurements with both synthetic and real objects has been carried out.

Description: The validity of a local positioning system (LPS) to measure inter-unit distance was investigated during a team sport movement circuit. Eight recreationally active, female indoor team-sport players completed a circuit, comprising seven types of movements (walk, jog, jump, sprint, 45° change of direction and shuffle), on an indoor court. Participants wore a receiver tag (ClearSky T6, Catapult Sports) and seven reflective markers, to allow for a comparison with the reference system (©Vicon Motion Systems, Oxford Metrics, UK). Inter-unit distance was collected for each combination of participants. Validity was assessed via root mean square error, mean bias and percentage of variance accounted for, both as an overall dataset and split into distance bands. The results presented a mean root mean square error of 0.20 ± 0.05 m, and mean bias detected an overestimation for all distance bands. The LPS shows acceptable accuracy for measuring inter-unit distance, opening up opportunities to utilise player tracking for tactical variables indoors.

Description: Traditional monitoring methods cannot obtain the overall thermal information for power transformers. To solve this problem, a distributed fiber optic sensor (DFOS) was creatively applied inside an operating 35 kV power transformer by highly integrating with the electromagnetic wires. Then, the transformer prototype with totally global sensing capability was successfully developed and it was qualified for power grid application through the strict ex-factory tests. The as designed optical fiber sensor works stably all the time with a temperature accuracy of ±0.2 °C and spatial positioning accuracy of 0.8 m. Based on the obtained internal temperature distribution, Gaussian convolution was further applied for the signal processing and hereby, the hotspots for all the windings and iron cores could be accurately traced. The hottest points were located at 89.1% (55 °C) of the high voltage winding height and 89.7% (77.5 °C) of the low voltage winding height. The actual precise hotspot location corrected the traditional cognition on the transformer windings and it would serve as an essential reference for the manufactures. This new nondestructive internal sensing and condition monitoring method also exhibits a promising future for the DFOS applying in the high-voltage electrical apparatus industry.

Description: The Position and Orientation System (POS) is the core device of high-resolution aerial remote sensing systems, which can obtain the real-time object position and collect target attitude information. The goal of exceeding 0.015°/0.003° of its real-time heading/attitude measurement accuracy is unlikely to be achieved without gravity disturbance compensation. In this paper, a high-precision gravity data architecture for gravity disturbance compensation technology is proposed, and a gravity database with accuracy better than 1 mGal is constructed in the test area. Based on the “Block-Time Variation” Markov Model (B-TV-MM), a gravity disturbance compensation device is developed. The gravity disturbance compensation technology is applied to POS products for the first time, and is applied in the field of aerial remote sensing. Flight test results show that the heading accuracy and attitude accuracy of POS products are improved by at least 6% and 16%, respectively. The device can be used for the gravity disturbance compensation of various inertial technology products.

Description: In this paper, an actuator fault estimation technique is proposed for quadcopters under uncertainties. In previous studies, matching conditions were required for the observer design, but they were found to be complex for solving linear matrix inequalities (LMIs). To overcome these limitations, in this study, an improved intermediate estimator algorithm was applied to the quadcopter model, which can be used to estimate actuator faults and system states. The system stability was validated using Lyapunov theory. It was shown that system errors are uniformly ultimately bounded. To increase the accuracy of the proposed fault estimation algorithm, a magnitude order balance method was applied. Experiments were verified with four scenarios to show the effectiveness of the proposed algorithm. Two first scenarios were compared to show the effectiveness of the magnitude order balance method. The remaining scenarios were described to test the reliability of the presented method in the presence of multiple actuator faults. Different from previous studies on observer-based fault estimation, this proposal not only can estimate the fault magnitude of the roll, pitch, yaw, and thrust channel, but also can estimate the loss of control effectiveness of each actuator under uncertainties.

Description: The benefits of automatic identification technologies in healthcare have been largely recognized. Nevertheless, unlocking their potential to support the most knowledge-intensive medical tasks requires to go beyond mere item identification. This paper presents an innovative Decision Support System (DSS), based on a semantic enhancement of Near Field Communication (NFC) standard. Annotated descriptions of medications and patient’s case history are stored in NFC transponders and used to help caregivers providing the right therapy. The proposed framework includes a lightweight reasoning engine to infer possible incompatibilities in treatment, suggesting substitute therapies. A working prototype is presented in a rheumatology case study and preliminary performance tests are reported. The approach is independent from back-end infrastructures. The proposed DSS framework is validated in a limited but realistic case study, and performance evaluation of the prototype supports its practical feasibility. Automated reasoning on knowledge fragments extracted via NFC enables effective decision support not only in hospital centers, but also in pervasive IoT-based healthcare contexts such as first aid, ambulance transport, rehabilitation facilities and home care.

Description: Stability is a prerequisite for legged robots to execute tasks and traverse rough terrains. To guarantee the stability of quadruped locomotion and improve the terrain adaptability of quadruped robots, a stability-guaranteed and high terrain adaptability static gait for quadruped robots is addressed. Firstly, three chosen stability-guaranteed static gaits: intermittent gait 1&2 and coordinated gait are investigated. In addition, then the static gait: intermittent gait 1, which is with the biggest stability margin, is chosen to do a further research about quadruped robots walking on rough terrains. Secondly, a position/force based impedance control is employed to achieve a compliant behavior of quadruped robots on rough terrains. Thirdly, an exploratory gait planning method on uneven terrains with touch sensing and an attitude-position adjustment strategy with terrain estimation are proposed to improve the terrain adaptability of quadruped robots. Finally, the proposed methods are validated by simulations.

Description: Many human activities and states are related to the facial muscles’ actions: from the expression of emotions, stress, and non-verbal communication through health-related actions, such as coughing and sneezing to nutrition and drinking. In this work, we describe, in detail, the design and evaluation of a wearable system for facial muscle activity monitoring based on a re-configurable differential array of stethoscope-microphones. In our system, six stethoscopes are placed at locations that could easily be integrated into the frame of smart glasses. The paper describes the detailed hardware design and selection and adaptation of appropriate signal processing and machine learning methods. For the evaluation, we asked eight participants to imitate a set of facial actions, such as expressions of happiness, anger, surprise, sadness, upset, and disgust, and gestures, like kissing, winkling, sticking the tongue out, and taking a pill. An evaluation of a complete data set of 2640 events with 66% training and a 33% testing rate has been performed. Although we encountered high variability of the volunteers’ expressions, our approach shows a recall = 55%, precision = 56%, and f1-score of 54% for the user-independent scenario(9% chance-level). On a user-dependent basis, our worst result has an f1-score = 60% and best result with f1-score = 89%. Having a recall ≥60% for expressions like happiness, anger, kissing, sticking the tongue out, and neutral(Null-class).

Description: This paper presents a two-layer controller for accurate and robust lateral path tracking control of highly automated vehicles. The upper-layer controller, which produces the front wheel steering angle, is implemented with a Linear Time-Varying MPC (LTV-MPC) whose prediction and control horizon are both optimized offline with particle swarm optimization (PSO) under varying working conditions. A constraint on the slip angle is imposed to prevent lateral forces from saturation to guarantee vehicle stability. The lower layer is a radial basis function neural network proportion-integral-derivative (RBFNN-PID) controller that generates electric current control signals executable by the steering motor to rapidly track the target steering angle. The nonlinear characteristics of the steering system are modeled and are identified on-line with the RBFNN so that the PID controller’s control parameters can be adjusted adaptively. The results of CarSim-Matlab/Simulink joint simulations show that the proposed hierarchical controller achieves a good level of path tracking accuracy while maintaining vehicle stability throughout the path tracking process, and is robust to dynamic changes in vehicle velocities and road adhesion coefficients.

Description: Iron deficiency (ID) is the most prevalent and severe nutritional disorder globally and is the leading cause of iron deficiency anemia (IDA). IDA often progresses subtly symptomatic in children, whereas prolonged deficiency may permanently impair development. Early detection and frequent screening are, therefore, essential to avoid the consequences of IDA. In order to reduce the production cost and complexities involved in building advanced ID sensors, the devices were fabricated using a home-built patterning procedure that was developed and used for this work instead of lithography, which allows for fast prototyping of dimensions. In this article, we report the development of graphene-based field-effect transistors (GFETs) functionalized with anti-ferritin antibodies through a linker molecule (1-pyrenebutanoic acid, succinimidyl ester), to facilitate specific conjugation with ferritin antigen. The resulting biosensors feature an unprecedented ferritin detection limit of 10 fM, indicating a tremendous potential for non-invasive (e.g., saliva) ferritin detection.

Description: Noise appears in images captured by real cameras. This paper studies the influence of noise on monocular feature-based visual Simultaneous Localization and Mapping (SLAM). First, an open-source synthetic dataset with different noise levels is introduced in this paper. Then the images in the dataset are denoised using the Fast and Flexible Denoising convolutional neural Network (FFDNet); the matching performances of Scale Invariant Feature Transform (SIFT), Speeded Up Robust Features (SURF) and Oriented FAST and Rotated BRIEF (ORB) which are commonly used in feature-based SLAM are analyzed in comparison and the results show that ORB has a higher correct matching rate than that of SIFT and SURF, the denoised images have a higher correct matching rate than noisy images. Next, the Absolute Trajectory Error (ATE) of noisy and denoised sequences are evaluated on ORB-SLAM2 and the results show that the denoised sequences perform better than the noisy sequences at any noise level. Finally, the completely clean sequence in the dataset and the sequences in the KITTI dataset are denoised and compared with the original sequence through comprehensive experiments. For the clean sequence, the Root-Mean-Square Error (RMSE) of ATE after denoising has decreased by 16.75%; for KITTI sequences, 7 out of 10 sequences have lower RMSE than the original sequences. The results show that the denoised image can achieve higher accuracy in the monocular feature-based visual SLAM under certain conditions.

Description: Multi-enzyme immobilization onto a capacitive field-effect biosensor by nano-spotting technique is presented. The nano-spotting technique allows to immobilize different enzymes simultaneously on the sensor surface with high spatial resolution without additional photolithographical patterning. The amount of applied enzymatic cocktail on the sensor surface can be tailored. Capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors with Ta2O5 as pH-sensitive transducer layer have been chosen to immobilize the three different (pL droplets) enzymes penicillinase, urease, and glucose oxidase. Nano-spotting immobilization is compared to conventional drop-coating method by defining different geometrical layouts on the sensor surface (fully, half-, and quarter-spotted). The drop diameter is varying between 84 µm and 102 µm, depending on the number of applied drops (1 to 4) per spot. For multi-analyte detection, penicillinase and urease are simultaneously nano-spotted on the EIS sensor. Sensor characterization was performed by C/V (capacitance/voltage) and ConCap (constant capacitance) measurements. Average penicillin, glucose, and urea sensitivities for the spotted enzymes were 81.7 mV/dec, 40.5 mV/dec, and 68.9 mV/dec, respectively.

Description: The paper describes and presents a new calculation strategy for the determination of the aircraft’s resultant position using the GPS (Global Positioning System) SPP (Single Point Positioning) code method. The paper developed a concept of using the weighted average model with the use of measuring weights to improve the quality of determination of the coordinates and accuracy of GPS SPP positioning. In this research, measurement weights were used as a function of the number of GPS satellites being tracked, and geometric PDOP (Position Dilution of Precision) coefficient. The calculations were made using navigation data recorded by two independent GPS receivers: Thales Mobile Mapper and Topcon HiPerPro. On the basis of the obtained results, it was found that the RMS (Root Mean Square) accuracy of positioning for XYZ geocentric coordinates was better than 1.2% to 33.7% for the weighted average method compared to a single GPS SPP solution. The proposed approach is therefore of practical application in air navigation to improve the quality of aircraft positioning.

Description: Currently, many intelligent building energy management systems (BEMSs) are emerging for saving energy in new and existing buildings and realizing a sustainable society worldwide. However, installing an intelligent BEMS in existing buildings does not realize an innovative and advanced society because it only involves simple equipment replacement (i.e., replacement of old equipment or LED (Light Emitting Diode) lamps) and energy savings based on a stand-alone system. Therefore, artificial intelligence (AI) is applied to a BEMS to implement intelligent energy optimization based on the latest ICT (Information and Communications Technologies) technology. AI can analyze energy usage data, predict future energy requirements, and establish an appropriate energy saving policy. In this paper, we present a dynamic heating, ventilation, and air conditioning (HVAC) scheduling method that collects, analyzes, and infers energy usage data to intelligently save energy in buildings based on reinforcement learning (RL). In this regard, a hotel is used as the testbed in this study. The proposed method collects, analyzes, and infers IoT data from a building to provide an energy saving policy to realize a futuristic HVAC (heating system) system based on RL. Through this process, a purpose-oriented energy saving methodology to achieve energy saving goals is proposed.

Description: With the development of commodity economy, the emergence of fake and shoddy products has seriously harmed the interests of consumers and enterprises. To tackle this challenge, customized 2D barcode is proposed to satisfy the requirements of the enterprise anti-counterfeiting certification. Based on information hiding technology, the proposed approach can solve these challenging problems and provide a low-cost, difficult to forge, and easy to identify solution, while achieving the function of conventional 2D barcodes. By weighting between the perceptual quality and decoding robustness in sensing recognition, the customized 2D barcode can maintain a better aesthetic appearance for anti-counterfeiting and achieve fast encoding. A new picture-embedding scheme was designed to consider 2D barcode, within a unit image block as a basic encoding unit, where the 2D barcode finder patterns were embedded after encoding. Experimental results demonstrated that the proposed customized barcode could provide better encoding characteristics, while maintaining better decoding robustness than several state-of-the-art methods. Additionally, as a closed source 2D barcode that could be visually anti-counterfeit, the customized 2D barcode could effectively prevent counterfeiting that replicate physical labels. Benefitting from the high-security, high information capacity, and low-cost, the proposed customized 2D barcode with sensing recognition scheme provide a highly practical, valuable in terms of marketing, and anti-counterfeiting traceable solution for future smart IoT applications.

Description: In the last decades, the applications of structural monitoring are moving toward the field of civil engineering and infrastructures. Nevertheless, if the structures have damages, it does not mean that they have a complete loss of functionality, but rather that the system is no longer in an optimal condition so that, if the damage increases, the structure can collapse. Structural Health Monitoring (SHM), a process for the identification of damage, periodically collects data from suitable sensors that allow to characterize the damage and establishes the health status of the structure. Therefore, this monitoring will provide information on the structure condition, mostly about its integrity, in a short time, and, for infrastructures and civil structures, it is necessary to assess performance and health status. The aim of this work is to design an Internet of Things (IoT) system for Structural Health Monitoring to find possible damages and to see how the structure behaves over time. For this purpose, a customized datalogger and nodes have been designed. The datalogger is able to acquire the data coming from the nodes through RS485 communication and synchronize acquisitions. Furthermore, it has an internal memory to allow for the post-processing of the collected data. The nodes are composed of a digital triaxial accelerometer, a general-purpose microcontroller, and an external memory for storage measures. The microcontroller communicates with an accelerometer, acquires values, and then saves them in the memory. The system has been characterized and the damage indicator has been evaluated on a testing structure. Experimental results show that the estimated damage indicator increases when the structure is perturbed. In the present work, the damage indicator increased by a maximum value of 24.65 when the structure is perturbed by a 2.5 mm engraving.

Description: This paper describes the design and the performance of simultaneous, multifrequency impedance measurement system for four inductive-loop (IL) sensors which have been developed for vehicle parameters measurement based on vehicle magnetic profile (VMP) analysis. Simultaneous impedance measurement on several excitation frequencies increases the VMP measurement reliability because typical electromagnetic interferences (EMI) are narrowband, and should not simultaneously affect, in the same way, all measurement bands that are spread in the frequency, i.e., it is expected that at least one measurement band is disturbance-free. The system consists of two standard and two slim IL sensors, specially designed and installed, the analogue front-end, and an industrial computer with digital-to-analogue and analogue-to-digital converters accessed via field-programmable gate array (FPGA). The impedance of the IL sensors is obtained by vector measurement of voltages from auto-balancing bridge (ABB) front-end. Complex voltages are demodulated from excitation frequencies with FIR filters designed with the flat-top windows. The system is capable of delivering VMPs in real-time mode, and also storing voltages for off-line postprocessing and analysis. Field distributions and sensitivities of slim and standard IL sensors are also discussed. Field test confirmed assumed increased reliability of VMP measurement for proposed simultaneous multifrequency operational mode.

Description: This article shows the development of a computer-controlled lab-on-a-chip device with three magnetohydrodynamic (MHD) pumps and a pneumatic valve. The chip was made of a stack of layers of polymethylmethacrylate (PMMA), cut using a laser engraver and thermally bonded. The MHD pumps were built using permanent magnets (neodymium) and platinum electrodes, all of them controlled by an Arduino board and a set of relays. The implemented pumps were able to drive solutions in the open channels with a flow rate that increased proportionally with the channel width and applied voltage. To address the characteristic low pressures generated by this kind of pump, all channels were interconnected. Because the electrodes were immersed in the electrolyte, causing electrolysis and pH variations, the composition and ionic strength of the electrolyte solution were controlled. Additionally, side structures for releasing bubbles were integrated. With this multi-pump and valve solution, the device was used to demonstrate the possibility of performing an injection sequence in a system that resembles a traditional flow injection analysis system. Ultimately, the results demonstrate the possibility of performing injection sequences using an array of MHD pumps that can perform fluid handling in the 0–5 µL s−1 range.

Description: Distributed sensor networks are at the heart of smart buildings, providing greater detail and valuable insights into their energy consumption patterns. The problem is particularly complex for older buildings retrofitted with Building Energy Management Systems (BEMS) where extracting useful knowledge from large sensor data streams without full understanding of the underlying system variables is challenging. This paper presents an application of Q-Analysis, a computationally simple topological approach for summarizing large sensor data sets and revealing useful relationships between different variables. Q-Analysis can be used to extract novel structural features called Q-vectors. The Q-vector magnitude visualizations are shown to be very effective in providing insights on macro behaviors, i.e., building floor behaviors in the present case, which are not evident from the use of unsupervised learning algorithms applied on individual terminal units. It has been shown that the building floors exhibited distinct behaviors that are dependent on the set-point distribution, but independent of the time and season of the year.

Description: Optical fiber based immunosensors are very attractive for biomarker detection. In order to improve the sensor response, we propose a promising strategy which combines porous-layer modification of the fiber surface and streptavidin-biotin-peroxidase nano-complex signal amplification in chemiluminescent detection. Two hepatitis B antigens, hepatitis B surface antigen (HBsAg) and hepatitis B e antigen (HBeAg), are used as the targets for analysis using the proposed sensor. Comparing to immunoassays using normal optical fiber sensors, the response of the present sensor is enhanced by a factor of 4.8 and 6.7 for detection of HBsAg and HBeAg, respectively. The limit-of-quantitation of the proposed method is as low as 0.3 fg/mL (0.01 fg/mL) with a wide linear response range of 3 fg/mL–150 ng/mL (0.1 fg/mL–160 ng/mL) for sensing HBsAg (HBeAg). Quantitative determination of HBsAg and HBeAg in human serum samples is performed, showing the applicability of the proposed method for biomarker detection.

Description: Xylella fastidiosa (Xf) is a well-known bacterial plant pathogen mainly transmitted by vector insects and is associated with serious diseases affecting a wide variety of plants, both wild and cultivated; it is known that over 350 plant species are prone to Xf attack. In olive trees, it causes olive quick decline syndrome (OQDS), which is currently a serious threat to the survival of hundreds of thousands of olive trees in the south of Italy and in other countries in the European Union. Controls and countermeasures are in place to limit the further spreading of the bacterium, but it is a tough war to fight mainly due to the invasiveness of the actions that can be taken against it. The most effective weapons against the spread of Xf infection in olive trees are the detection of its presence as early as possible and attacks to the development of its vector insects. In this paper, image processing of high-resolution visible and multispectral images acquired by a purposely equipped multirotor unmanned aerial vehicle (UAV) is proposed for fast detection of Xf symptoms in olive trees. Acquired images were processed using a new segmentation algorithm to recognize trees which were subsequently classified using linear discriminant analysis. Preliminary experimental results obtained by flying over olive groves in selected sites in the south of Italy are presented, demonstrating a mean Sørensen–Dice similarity coefficient of about 70% for segmentation, and 98% sensitivity and 93% precision for the classification of affected trees. The high similarity coefficient indicated that the segmentation algorithm was successful at isolating the regions of interest containing trees, while the high sensitivity and precision showed that OQDS can be detected with a low relative number of both false positives and false negatives.

Description: Subsurface drainage systems are commonly used to remove surplus water from the soil profile of a poorly drained farmland. Traditional methods for drainage mapping involve the use of tile probes and trenching equipment that are time-consuming, labor-intensive, and invasive, thereby entailing an inherent risk of damaging the drainpipes. Effective and efficient methods are needed in order to map the buried drain lines: (1) to comprehend the processes of leaching and offsite release of nutrients and pesticides and (2) for the installation of a new set of drain lines between the old ones to enhance the soil water removal. Non-invasive geophysical soil sensors provide a potential alternative solution. Previous research has mainly showcased the use of time-domain ground penetrating radar, with variable success, depending on local soil and hydrological conditions and the central frequency of the specific equipment used. The objectives of this study were: (1) to test the use of a stepped-frequency continuous wave three-dimensional ground penetrating radar (3D-GPR) with a wide antenna array for subsurface drainage mapping and (2) to evaluate its performance with the use of a single-frequency multi-receiver electromagnetic induction (EMI) sensor in-combination. This sensor combination was evaluated on twelve different study sites with various soil types with textures ranging from sand to clay till. While the 3D-GPR showed a high success rate in finding the drainpipes at five sites (sandy, sandy loam, loamy sand, and organic topsoils), the results at the other seven sites were less successful due to the limited penetration depth of the 3D-GPR signal. The results suggest that the electrical conductivity estimates produced by the inversion of apparent electrical conductivity data measured by the EMI sensor could be a useful proxy for explaining the success achieved by the 3D-GPR in finding the drain lines.

Description: A simple and low-cost electrochemical sensor based on multimodified screen-printed electrodes (SPEs) was successfully synthesized for the sensitive detection of β-lactoglobulin (β-Lg). The surface treatment of SPEs was accomplished by a simple drip coating method using polyethyleneimine (PEI), reduced graphene oxide (rGO), and gold nanoclusters (AuNCs), and the treated SPEs showed excellent electrical conductivity. The modified SPEs were then characterized with UV-Vis, SEM, TEM, and FTIR to analyze the morphology and composition of the AuNCs and the rGO. An anti-β-Lg antibody was then immobilized on the composite material obtained by modifying rGO with PEI and AuNCs (PEI-rGO-AuNCs), leading to the remarkable reduction in conductivity of the SPEs due to the reaction between antigen and antibody. The sensor obtained using this novel approach enabled a limit of detection (LOD) of 0.08 ng/mL and a detection range from 0.01 to 100 ng/mL for β-Lg. Furthermore, pure milk samples from four milk brands were measured using electrochemical sensors, and the results were in excellent agreement with those from commercial enzyme-linked immunosorbent assay (ELISA) methods.

Description: Body Sensor Networks (BSN) have emerged as a particularization of Wireless Sensor Networks (WSN) in the context of body monitoring environments, closely linked to healthcare applications. These networks are made up of smart biomedical sensors that allow the monitoring of physiological parameters and serve as the basis for e-Health applications. This Special Issue collects some of the latest developments in the field of BSN related to new developments in biomedical sensor technologies, the design and experimental characterization of on-body/in-body antennas and new communication protocols for BSN, including some review studies.

Description: This paper presents a vision-based navigation system designed for indoor localization. The suggested framework works as a standalone 3 D positioning system by fusing a sophisticated optical-flow pedometry with map constrains using an advanced particle filter. The presented method requires no personal calibration and works on standard smartphones with relatively low energy consumption. Field experiments on Android smartphones show that the expected 3 D error is about 1–2 m in most real-life scenarios.

Description: Recently, unmanned aerial vehicle (UAV)-based communications gained a lot of attention due to their numerous applications, especially in rescue services in post-disaster areas where the terrestrial network is wholly malfunctioned. Multiple access/gateway UAVs are distributed to fully cover the post-disaster area as flying base stations to provide communication coverage, collect valuable information, disseminate essential instructions, etc. The access UAVs after gathering/broadcasting the necessary information should select and fly towards one of the surrounding gateways for relaying their information. In this paper, the gateway UAV selection problem is addressed. The main aim is to maximize the long-term average data rates of the UAVs relays while minimizing the flights’ battery cost, where millimeter wave links, i.e., using 30~300 GHz band, employing antenna beamforming, are used for backhauling. A tool of machine learning (ML) is exploited to address the problem as a budget-constrained multi-player multi-armed bandit (MAB) problem. In this setup, access UAVs act as the players, and the arms are the gateway UAVs, while the rewards are the average data rates of the constructed relays constrained by the battery cost of the access UAV flights. In this decentralized setting, where information is neither prior available nor exchanged among UAVs, a selfish and concurrent multi-player MAB strategy is suggested. Towards this end, three battery-aware MAB (BA-MAB) algorithms, namely upper confidence bound (UCB), Thompson sampling (TS), and the exponential weight algorithm for exploration and exploitation (EXP3), are proposed to realize gateways selection efficiently. The proposed BA-MAB-based gateway UAV selection algorithms show superior performance over approaches based on near and random selections in terms of total system rate and energy efficiency.

Description: This work demonstrates an integrated multiple-input multiple-output (MIMO) antenna solution for Long Term Evolution (LTE) and Millimeter-Wave (mm-wave) 5G wireless communication services. The proposed structure is comprised of a two-element LTE MIMO antenna, and a four-element 5G MIMO configuration with rectangular and circular defects in the ground plane. For experimental validation, the proposed structure is fabricated on a Rogers RO4350B substrate with 0.76 mm thickness. The overall substrate dimensions are 75 mm × 110 mm. The proposed structure is capable of operating at 5.29–6.12 GHz (LTE 46 and 47 bands) and 26–29.5 GHz (5G mm-wave) frequency bands. Additionally, the measured peak gain of 5.13 and 9.53 dB is attained respectively for the microwave and mm-wave antennas. Furthermore, the analysis of the MIMO performance metrics demonstrates good characteristics, and excellent field correlation performance across the operating bands. Furthermore, the analysis of the Specific Absorption Rate (SAR) and Power Density (PD) at the lower frequency band (5.9 GHz) and PD only at mm-Wave frequency band (28 GHz) verifies that the proposed antenna system satisfies the international human safety standards. Therefore, the proposed integrated MIMO antenna configuration ascertains to be a potential contender for the forthcoming communication applications.

Description: In this article, a zigzag graphene nanoribbon (ZGNR)-based sensor was built utilizing the Atomistic ToolKit Virtual NanoLab (ATK-VNL), and used to detect nitric oxide (NO), nitrogen dioxide (NO2), and ammonia (NH3). The successful adsorption of these gases on the surface of the ZGNR was investigated using adsorption energy (Eads), adsorption distance (D), charge transfer (∆Q), density of states (DOS), and band structure. Among the three gases, the ZGNR showed the highest adsorption energy for NO with −0.273 eV, the smallest adsorption distance with 2.88 Å, and the highest charge transfer with −0.104 e. Moreover, the DOS results reflected a significant increase of the density at the Fermi level due to the improvement of ZGNR conductivity as a result of gas adsorption. The surface of ZGNR was then modified with an epoxy group (-O-) once, then with a hydroxyl group (-OH), and finally with both (-O-) and (-OH) groups in order to improve the adsorption capacity of ZGNR. The adsorption parameters of ZGNR were improved significantly after the modification. The highest adsorption energy was found for the case of ZGNR-O-OH-NO2 with −0.953 eV, while the highest charge transfer was found for the case of ZGNR-OH-NO with −0.146 e. Consequently, ZGNR-OH and ZGNR-O-OH can be considered as promising gas sensors for NO and NO2, respectively.

Description: Fault diagnosis in manufacturing systems represents one of the most critical challenges dealing with condition-based monitoring in the recent era of smart manufacturing. In the current Industry 4.0 framework, maintenance strategies based on traditional data-driven fault diagnosis schemes require enhanced capabilities to be applied over modern production systems. In fact, the integration of multiple mechanical components, the consideration of multiple operating conditions, and the appearance of combined fault patterns due to eventual multi-fault scenarios lead to complex electromechanical systems requiring advanced monitoring strategies. In this regard, data fusion schemes supported with advanced deep learning technology represent a promising approach towards a big data paradigm using cloud-based software services. However, the deep learning models’ structure and hyper-parameters selection represent the main limitation when applied. Thus, in this paper, a novel deep-learning-based methodology for fault diagnosis in electromechanical systems is presented. The main benefits of the proposed methodology are the easiness of application and high adaptability to available data. The methodology is supported by an unsupervised stacked auto-encoders and a supervised discriminant analysis.

Description: Aiming at the poor accuracy and difficult verification of maneuver modeling induced by the wind, waves and sea surface currents in the actual sea, a novel sea trials correction method for ship maneuvering is proposed. The wind and wave drift forces are calculated according to the measurement data. Based on the steady turning hypothesis and pattern search algorithm, the adjustment parameters of wind, wave and sea surface currents were solved, the drift distances and drift velocities of wind, waves and sea surface currents were calculated and the track and velocity data of the experiment were corrected. The hydrodynamic coefficients were identified by the test data and the ship maneuvering motion model was established. The results show that the corrected data were more accurate than log data, the hydrodynamic coefficients can be completely identified, the prediction accuracy of the advance and tactical diameters were 93% and 97% and the prediction of the maneuvering model was accurate. Numerical cases verify the correction method and full-scale maneuvering model. The turning circle advance and tactical diameter satisfy the standards of the ship maneuverability of International Maritime Organization (IMO).

Description: The aim of this study is to compare the accuracy of Airgo™, a non-invasive wearable device that records breath, with respect to a gold standard. In 21 healthy subjects (10 males, 11 females), four parameters were recorded for four min at rest and in different positions simultaneously by Airgo™ and SensorMedics 2900 metabolic cart. Then, a cardio-pulmonary exercise test was performed using the Erg 800S cycle ergometer in order to test Airgo™’s accuracy during physical effort. The results reveal that the relative error median percentage of respiratory rate was of 0% for all positions at rest and for different exercise intensities, with interquartile ranges between 3.5 (standing position) and 22.4 (low-intensity exercise) breaths per minute. During exercise, normalized amplitude and ventilation relative error medians highlighted the presence of an error proportional to the volume to be estimated. For increasing intensity levels of exercise, Airgo™’s estimate tended to underestimate the values of the gold standard instrument. In conclusion, the Airgo™ device provides good accuracy and precision in the estimate of respiratory rate (especially at rest), an acceptable estimate of tidal volume and minute ventilation at rest and an underestimation for increasing volumes.

Description: Unmanned aerial vehicles (UAVs) have become popular in surveillance, security, and remote monitoring. However, they also pose serious security threats to public privacy. The timely detection of a malicious drone is currently an open research issue for security provisioning companies. Recently, the problem has been addressed by a plethora of schemes. However, each plan has a limitation, such as extreme weather conditions and huge dataset requirements. In this paper, we propose a novel framework consisting of the hybrid handcrafted and deep feature to detect and localize malicious drones from their sound and image information. The respective datasets include sounds and occluded images of birds, airplanes, and thunderstorms, with variations in resolution and illumination. Various kernels of the support vector machine (SVM) are applied to classify the features. Experimental results validate the improved performance of the proposed scheme compared to other related methods.

Description: In an indoor environment, object identification and localization are paramount for human-object interaction. Visual or laser-based sensors can achieve the identification and localization of the object based on its appearance, but these approaches are computationally expensive and not robust against the environment with obstacles. Radio Frequency Identification (RFID) has a unique tag ID to identify the object, but it cannot accurately locate it. Therefore, in this paper, the data of RFID and laser range finder are fused for the better identification and localization of multiple dynamic objects in an indoor environment. The main method is to use the laser range finder to estimate the radial velocities of objects in a certain environment, and match them with the object’s radial velocities estimated by the RFID phase. The method also uses a fixed time series as “sliding time window” to find the cluster with the highest similarity of each RFID tag in each window. Moreover, the Pearson correlation coefficient (PCC) is used in the update stage of the particle filter (PF) to estimate the moving path of each cluster in order to improve the accuracy in a complex environment with obstacles. The experiments were verified by a SCITOS G5 robot. The results show that this method can achieve an matching rate of 90.18% and a localization accuracy of 0.33m in an environment with the presence of obstacles. This method effectively improves the matching rate and localization accuracy of multiple objects in indoor scenes when compared to the Bray-Curtis (BC) similarity matching-based approach as well as the particle filter-based approach.

Description: A higher number of people increasingly uses digital games. This growing interest in games, with different objectives, justifies the investigation of some aspects and concepts involved, such as product quality (game), usability, playability, and user or player experience, topics investigated by the multidisciplinary area called Human–Computer Interaction (HCI). Although the majority of users of these games are children and young people, an increasing number of older adults join technology and use different types of digital games. Several studies establish the increase in learning, socialization and exercise promotion, and cognitive and psychomotor skills improvement, all within the context of active and healthy aging. The objective of this work is to carry out a systematic literature review investigating the player experience of the elderly in digital games. The work allowed answering five research questions that were formulated. The evolution and maturity level of the research area are studied together with the research methods used. The factors that motivate adults to play were also analyzed; what are the recommended technical characteristics for games and some tools and metrics with which games are evaluated for older adults? Research gaps were detected in the area; there are not many specific studies on playability and player experience applied to the older adult, nor are there proven tools and metrics to evaluate them. Particular techniques for assessing and designing games focused on older adults are lacking, and quantitative studies that better identify the factors that affect the playability and experience of older adults in digital games.

Description: Increasing the area of planted forests is rather important for compensation the loss of natural forests and slowing down the global warming. Forest growing stem volume (GSV) is a key indicator for monitoring and evaluating the quality of planted forest. To improve the accuracy of planted forest GSV located in south China, four L-band ALOS PALSAR-2 quad-polarimetric synthetic aperture radar (SAR) images were acquired from June to September with short intervals. Polarimetric characteristics (un-fused and fused) derived by the Yamaguchi decomposition from time series SAR images with different intervals were considered as independent variables for the GSV estimation. Then, the general linear model (GLM) obeyed the exponential distribution were proposed to retrieve the stand-level GSV in plantation. The results show that the un-fused power of double bounce scatters and four fused variables derived from single SAR image is highly sensitive to the GSV, and these polarimeric characteristics derived from the time series images more significantly contribute to improved estimation of GSV. Moreover, compared with the estimated GSV using the semi-exponential model, the employed GLM model with less limitations and simple algorithm has a higher saturation level (nearly to 300 m3/ha) and higher sensitivity to high forest GSV values than the semi-exponential model. Furthermore, by reducing the external disturbance with the help of time average, the accuracy of estimated GSV is improved using fused polarimeric characteristics, and the estimation accuracy of forest GSV was improved as the images increase. Using the fused polarimetric characteristics (Dbl×Vol/Odd) and the GLM, the minimum RRMSE was reduced from 33.87% from single SAR image to 24.42% from the time series SAR images. It is implied that the GLM is more suitable for polarimetric characteristics derived from the time series SAR images and has more potential to improve the planted forest GSV.

Description: In this paper, an approach to measure both the refractive index (RI) and the pressure simultaneously using two Whispering-Gallery Modes (WGMs) in a microdisk resonator is theoretically proposed. Due to the difference in the energy distribution of the first and second order WGMs, the sensitivity of two modes toward the variation of RI and pressure applied to the device show differences. An RI sensitivity of 29.07 nm/RIU and pressure sensitivity of 0.576 pm/kPa for WGM (1,36), and an RI sensitivity of 38.68 nm/RIU and a pressure sensitivity of 0.589 pm/kPa for WGM (2,28) are obtained through the 3D finite-difference time-domain (3D-FDTD) simulation. Dual parametric sensing can be achieved by solving the second-order inverse sensitivity matrix. Therefore, strain–optical coupling behavior is effectively eliminated. The dual sensing scheme we proposed provides a novel approach to overcome the difficulty of multi-sensing applications based on the flexible photonic device.

Description: The Internet of Things (IoT) is a world of connected networks and modern technology devices, among them vehicular networks considered more challenging due to high speed and network dynamics. Future trends in IoT allow these inter networks to share information. Also, the previous security solutions to vehicular IoT (VIoT) much emphasize on privacy protection and security related issues using public keys infrastructure. However, the primary concern about efficient trust assessment, authorized users malfunctioning, and secure information dissemination in vehicular wireless networks have not been explored. To cope with these challenges, we propose a trust enhanced on-demand routing (TER) scheme, which adopts TrustWalker (TW) algorithm for efficient trust assessment and route search technique in VIoT. TER comprised of novel three-valued subjective logic (3VSL), TW algorithm, and ad hoc on-demand distance vector (AODV) routing protocol. The simulated results validate the accuracy of the proposed scheme in term of throughput, packet drop ratio (PDR), and end to end (E2E) delay. In the simulation, the execution time of the TW algorithm is analyzed and compared with another route search algorithm, i.e., Assess-Trust (AT), by considering real-world online datasets such as Pretty Good Privacy and Advogato. The accuracy and efficiency of the TW algorithm, even with a large number of vehicle users, are also demonstrated through simulations.

Description: The incorporation of a proper sensing material towards the construction of high selectivity optical sensing devices is vital. Polysaccharides, such as chitosan and carrageenan, are among the bio-based sensing materials that are extensively employed due to their remarkable physicochemical attributes. This paper highlights the critical aspects of the design of suitable polysaccharides for the recognition of specific analytes through physical and chemical modifications of polysaccharide structure. Such modifications lead to the enhancement of physicochemical properties of polysaccharides and optical sensor performance. Chitosan and carrageenan are two materials that possess excellent features which are capable of sensing target analytes via various interactions. The interaction between polysaccharides and analytes is dependent on the availability of functional groups in their structure. The integration of polysaccharides with various optical sensing techniques further improves optical sensor performance. The application of polysaccharides as sensing materials in various optical sensing techniques is also highlighted, particularly for metal ion sensing.

Description: Indoor localization based on unsynchronized, low-complexity, passive radio frequency identification (RFID) using the received signal strength indicator (RSSI) has a wide potential for a variety of internet of things (IoTs) applications due to their energy-harvesting capabilities and low complexity. However, conventional RSSI-based algorithms present inaccurate ranging, especially in indoor environments, mainly because of the multipath randomness effect. In this work, we propose RSSI-based localization with low-complexity, passive RFID infrastructure utilizing the potential benefits of large-scale MIMO technology operated in the millimeter-wave band, which offers channel hardening, in order to alleviate the effect of small-scale fading. Particularly, by investigating an indoor environment equipped with extremely simple dielectric resonator (DR) tags, we propose an efficient localization algorithm that enables a smart object equipped with large-scale MIMO exploiting the RSSI measurements obtained from the reference DR tags in order to improve the localization accuracy. In this context, we also derive Cramer–Rao lower bound of the proposed technique. Numerical results evidence the effectiveness of the proposed algorithms considering various arbitrary network topologies, and results are compared with an existing algorithm, where the proposed algorithms not only produce higher localization accuracy but also achieve a greater robustness against inaccuracies in channel modeling.

Description: Technologies and techniques of location and navigation are advancing, allowing greater precision in locating people in complex and challenging conditions. These advances have attracted growing interest from the scientific community in using indoor positioning systems (IPSs) with a higher degree of precision and fast delivery time, for groups of people such as the visually impaired, to some extent improving their quality of life. Much research brings together various works that deal with the physical and logical approaches of IPSs to give the reader a more general view of the models. These surveys, however, need to be continuously revisited to update the literature on the features described. This paper presents an expansion of the range of technologies and methodologies for assisting the visually impaired in previous works, providing readers and researchers with a more recent version of what was done and the advantages and disadvantages of each approach to guide reviews and discussions about these topics. Finally, we discuss a series of considerations and future trends for the construction of indoor navigation and location systems for the visually impaired.

Description: The communication and connectivity functions of vehicles increase their vulnerability to hackers. The unintended failure and malfunction of in-vehicle systems caused by external factors threaten the security and safety of passengers. As the controller area network alone cannot protect vehicles from external attacks, techniques to analyze and detect external attacks are required. Therefore, we propose a multi-labeled hierarchical classification (MLHC) intrusion detection model that analyzes and detects external attacks caused by message injection. This model quickly determines the occurrence of attacks and classifies the attack using only existing classified attack data. We evaluated the performance of the model by analyzing its learning space. We further verified the model by comparing its accuracy, F1 score and data learning and evaluation times with the two layers multi-class detection (TLMD) and single-layer multi-class classification (SLMC) models. The simulation results show that the MLHC model has the highest F1 score of 0.9995 and is 87.30% and 99.92% faster than the SLMC and TLMD models in terms of detection time, respectively. Consequently, the proposed model can classify both the type and existence or absence of attacks with high accuracy and can be used in interior communication environments of high-speed vehicles with a high throughput.

Description: We studied the use of a rotating multi-layer 3D Light Detection And Ranging (LiDAR) sensor (specifically the Velodyne HDL-32E) mounted on a social robot for the estimation of features of people around the robot. While LiDARs are often used for robot self-localization and people tracking, we were interested in the possibility of using them to estimate the people’s features (states or attributes), which are important in human–robot interaction. In particular, we tested the estimation of the person’s body orientation and their gender. As collecting data in the real world and labeling them is laborious and time consuming, we also looked into other ways for obtaining data for training the estimators: using simulations, or using LiDAR data collected in the lab. We trained convolutional neural network-based estimators and tested their performance on actual LiDAR measurements of people in a public space. The results show that with a rotating 3D LiDAR a usable estimate of the body angle can indeed be achieved (mean absolute error 33.5 ° ), and that using simulated data for training the estimators is effective. For estimating gender, the results are satisfactory (accuracy above 80%) when the person is close enough; however, simulated data do not work well and training needs to be done on actual people measurements.