ALBERT

Description: In our previous studies, we investigated the performance of a novel pneumatic planar magnetic separator (PMS) for the dry beneficiation of a selected magnetite ore. In the present study, we have extended the studies on the PMS with the focus on investigating how various PMS processing flowsheet configurations influence its performance. The outcomes were subsequently compared with those of a Davis tube recovery (DTR) tester. The study demonstrated that the use of PMS in the dry beneficiation of magnetite ores is feasible, and operating the PMS in different flowsheet configurations positively influences the magnetite concentrate grade and purity. Finally, the study showed that the PMS performance compares well with that of DTR and can potentially replace DTR in operations that are carried out in arid regions.

Description: In this study, the flotation behavior of malachite was investigated using hydrophobic talc nanoparticles (TNs) as collectors. To improve the floatability of TN-deposited malachite, various experimental parameters were systematically investigated. We found that the floatability sharply increased as the size of the TNs decreased. The floatability of malachite was enhanced in the presence of smaller TNs, since higher amounts of smaller TNs were deposited on the surface of the malachite, thus rendering the surface more hydrophobic. Moreover, the floatability of the TN-deposited malachite increased as the pH decreased, likely due to the more favorable interaction between TNs and malachite by means of electrostatic attraction. Furthermore, the floatability became more enhanced as the TN concentration increased, likely associated with increases in the amount of TNs deposited on the surface of the malachite, thus enhancing the floatability by altering the hydrophobicity of the surface. Our findings suggest that the application of natural hydrophobic TNs as collectors in malachite flotation should be introduced as a new concept.

Description: Minerals from mantle xenoliths in the Zapolyarnaya pipe in the Upper Muna field, Russia and from mineral separates from other large diamondiferous kimberlite pipes in this field (Deimos, Novinka and Komsomolskaya-Magnitnaya) were studied with EPMA and LA-ICP-MS. All pipes contain very high proportions of sub-calcic garnets. Zapolyarnaya contains mainly dunitic xenoliths with veinlets of garnets, phlogopites and Fe-rich pyroxenes similar in composition to those from sheared peridotites. PT estimates for the clinopyroxenes trace the convective inflection of the geotherm (40–45 mW·m−2) to 8 GPa, inflected at 6 GPa and overlapping with PT estimates for ilmenites derived from protokimberlites. The Upper Muna mantle lithosphere includes dunite channels from 8 to 2 GPa, which were favorable for melt movement. The primary layering deduced from the fluctuations of CaO in garnets was smoothed by the refertilization events, which formed additional pyroxenes. Clinopyroxenes from the Novinka and Komsomolskaya-Magnitnaya pipes show a more linear geotherm and three branches in the P-Fe# plot from the lithosphere base to the Moho, suggesting several episodes of pervasive melt percolation. Clinopyroxenes from Zapolyarnaya are divided into four groups according to thermobarometry and trace element patterns, which show a stepwise increase of REE and incompatible elements. Lower pressure groups including dunitic garnets have elevated REE with peaks in Rb, Th, Nb, Sr, Zr, and U, suggesting mixing of the parental protokimberlitic melts with partially melted metasomatic veins of ancient subduction origin. At least two stages of melt percolation formed the inclined PT paths: (1) an ancient garnet semi-advective geotherm (35–45 mW·m−2) formed by volatile-rich melts during the major late Archean event of lithosphere growth; and (2) a hotter megacrystic PT path (Cpx-Ilm) formed by feeding systems for kimberlite eruptions (40–45 mW·m−2). Ilmenite PT estimates trace three separate PT trajectories, suggesting a multistage process associated with metasomatism and formation of the Cpx-Phl veinlets in dunites. Heating associated with intrusions of protokimberlite caused reactivation of the mantle metasomatites rich in H2O and alkali metals and possibly favored the growth of large megacrystalline diamonds.

Description: The article is devoted to a reconstruction of the sedimentation processes in Kamyshovoye Lake (the Kaliningrad Region, Russia) during the Late Glacial and Holocene. The results of the geochemical analysis of Kamyshovoye Lake’s bottom sediments, accompanied by statistical processing and detailed radiocarbon dating, are presented. It was established that a high proportion of mineral matter dominated in the intervals between 15,000 and 11,400 and between 1400 and 600 cal y BP; enrichment with carbonates was noted between 11,400 and 5200 cal y BP and during the past 600 years; and a high percentage of organic matter was recorded between 7800 and 600 cal y BP. We conclude that the increase in mineral matter was influenced by such factors as reduced vegetation cover due to natural and anthropogenic processes, aeolian transfer, and dead-ice melting during the Late Glacial. The increase in carbonate matter was mainly associated with humidity and the reduction conditions of the lake ecosystem. Organogenic matter content was affected by the autochthonic (biological) productivity of the lake, which directly depends on more favorable climatic conditions.

Description: Achieving sustainable zero-waste and carbon neutral solutions that contribute to a circular economy is critically important for the long-term prosperity and continuity of traditional carbon-based energy industries. The Estonian oil shale (OS) sector is an example where such solutions are more than welcome. The combustion of OS generates a continuous flow of ashes destined to landfills. In this study, the technical feasibility of producing monolith building materials incorporating different OS ashes from Estonia was evaluated. Three binder systems were studied: self-cementation of the ashes, ceramic sintering in clay brick production and accelerated carbonation of OS ash (OSA) compacts. Results showed that most of the OSAs studied have low self-cementitious properties and these properties were affected by ash fineness and mineralogical composition. In case of clay bricks, OSA addition resulted in a higher porosity and improved insulation properties. The carbonated OSA compacts showed promising compressive strength. Accelerated carbonation of compacted samples was found to be the most promising way for the future utilization of OSAs as sustainable zero-waste and carbon neutral solution.

Description: This paper presents a review and analysis of large-scale air convection tests and the establishment of intrinsic permeability in coarse open-graded materials. Natural air convection can make a significant contribution to heat transfer during cooling periods. In seasonally freezing environments this can result in excessive frost penetration and subsequent frost-related problems. Intrinsic permeability largely defines the onset of convective heat transfer in granular materials. Conventional methods for measuring intrinsic permeability cannot be applied to very coarse materials. Large-scale laboratory experiments on natural air convection can serve as an alternative method for determining this crucial parameter. This paper gives an overview of four different experimental test setups for measuring natural air convection, all differing in physical shape, boundary conditions and heat flux/temperature measurement devices. Comparison between these is difficult because the air convection pattern can differ and in some cases the shape and number of convection cells cannot be validated. Most of the studies available in the literature use theoretical equations to approximate intrinsic permeability. A method based on the analytical Nu-Ra number relationship is employed to establish the values of intrinsic permeability. Tests that provide enough data to enable the use of the Nu-Ra relationship are very limited. The overall results show a reasonable correlation between experiment-based intrinsic permeability and theoretical approximation. However, several issues must be addressed: first, differences may exist between the intrinsic permeability of natural and of crushed materials due to the shape effect. Second, the method used is in theory valid only for two-dimensional air convection within a square enclosure heated from below. Yet the results show that this method could be extended to other conditions with a certain degree of confidence. Third, a good estimate of intrinsic permeability is possible only with accurate experimental measurement.

Description: A remarkable exposure of tubular authigenic carbonates was found on the seafloor in the Dongsha area of the South China Sea (SCS). The tubular carbonates, around 2–3 cm in diameter and usually less than 10 cm in length, represent broken fragments of once-larger pipes that now protrude from muddy sediments. The morphology, carbon and oxygen stable isotope compositions, and trace and rare earth element contents of the carbonates were analyzed to decipher the mode of carbonate formation. The tubular carbonates exhibit a dark brown coating of iron and manganese hydrous oxides, indicating prolonged exposure to oxic bottom waters. The carbonate content of the micritic pipes falls between 12.5 and 67.3 wt.% with an average of 42.0 wt.%, suggesting formation within the sediment. This inference is supported by trace and rare earth element patterns including a moderate enrichment of middle rare earth elements. Low δ13C values (as low as −50.3‰, Vienna Pee Dee Belemnite (VPDB)) suggest that carbonate precipitation was induced by the anaerobic oxidation of methane. The unusually positive δ18O values of the carbonates (as high as +5.3‰, VPDB) are believed to reflect the destabilization of locally abundant gas hydrate. Taken together, it is suggested that pipe formation was initiated by sediment-dwelling organisms, such as crustaceans or bivalves. The burrows subsequently acted as conduits for upward fluid migration. The lithification of the sediment directly surrounding the conduits and the partial filling of the conduits with carbonate cement resulted in the formation of tubular carbonates. Turbidity currents, sediment slumps, or the vigorous emission of fluids probably induced the fragmentation of tubular carbonates within the sediment. The carbonate fragments had been further subjected to winnowing by bottom currents. This study provides insight into the interaction of megafauna burrowing with fluid migration and carbonate formation at hydrocarbon seeps, highlighting the role of bottom currents and mass wasting on the formation of fragmented tubular carbonates.

Description: This study is focused on a barian titanian phlogopite found in an alkaline ultramafic dyke transecting Mesozoic limestones of the Gargano Promontory (Apulia, Italy). The rock containing the barian titanian phlogopite, an olivine-clinopyroxene-rich lamprophyre with nepheline and free of feldspars, has been classified as monchiquite. The present study combines chemical analyses, single crystal X-ray diffraction and Raman spectroscopy. Chemical variations suggest that the entry of Ba into the phlogopite structure can be explained by the exchange Ba + Al = K + Si. The crystal structure refinement indicates that the Ti uptake is consistent with the Ti–oxy exchange mechanism. The structural parameters associated with the oxy substitution mechanism are extremely enhanced and rarely reported in natural phlogopite: (a) displacement of M2 cation toward the O4 site (~0.7); (b) M2 octahedron bond-length distortion (~2.5); (c) very short c cell parameter (~10.14 Å). Raman analysis showed most prominent features in the 800–200 cm−1 region with the strongest peaks occurring at 773 and 735 cm−1. Only a weak, broad band was observed to occur in the OH-stretching region. As concerns the origin of the barian titanian phlogopite, the rock textural features clearly indicate that it crystallized from pockets of the interstitial melt. Here, Ba and Ti enrichment took place after major crystallization of olivine under fast-cooling conditions, close to the dyke margin.

Description: The complexity and high sensitivity of proteins to environmental factors give rise to a multitude of variables, which affect the stabilization mechanisms in protein foams. Interfacial and foaming properties of proteins have been widely studied, but the reported unique effect of pH, which can be of great interest to applications, has been investigated to a lesser extent. In this paper, we focus on the impact of pH on the stability of black foam films and corresponding foams obtained from solutions of a model globular protein—the whey β-lactoglobulin (BLG). Foam stability was analyzed utilizing three characteristic parameters (deviation time, transition time and half-lifetime) for monitoring the foam decay, while foam film stability was measured in terms of the critical disjoining pressure of film rupture. We attempt to explain correlations between the macroscopic properties of a foam system and those of its major building blocks (foam films and interfaces), and thus, to identify structure-property relationships in foam. Good correlations were found between the stabilities of black foam films and foams, while relations to the properties of adsorption layers appeared to be intricate. That is because pH-dependent interfacial properties of proteins usually exhibit an extremum around the isoelectric point (pI), but the stability of BLG foam films increases with increasing pH (3–7), which is well reflected in the foam stability. We discuss the possible reasons behind these intriguingly different behaviors on the basis of pH-induced changes in the molecular properties of BLG, which seem to be determining the mechanism of film rupture at the critical disjoining pressure.

Description: The oxidation state and local atomic environment of admixtures of In, Cu, and Ag in synthetic sphalerite crystals were determined by X-ray absorption spectroscopy (XAS). The sphalerite crystals doped with In, Cu, Ag, In–Cu, and In–Ag were synthesized utilizing gas transport, salt flux, and dry synthesis techniques. Oxidation states of dopants were determined using X-ray absorption near edge structure (XANES) technique. The local atomic structure was studied by X-ray absorption fine structure spectroscopy (EXAFS). The spectra were recorded at Zn, In, Ag, and Cu K-edges. In all studied samples, In was in the 3+ oxidation state and replaced Zn in the structure of sphalerite, which occurs with the expansion of the nearest coordination shells due to the large In ionic radius. In the presence of In, the oxidation state of Cu and Ag is 1+, and both metals can form an isomorphous solid solution where they substitute for Zn according to the coupled substitution scheme 2Zn2+ ↔ Me+ + In3+. Moreover, Ag K-edges EXAFS spectra fitting, combined with the results obtained for In- and Au-bearing sphalerite shows that the Me-S distances in the first coordination shell in the solid solution state are correlated with the ionic radii and increase in the order of Cu 〈 Ag 〈 Au. The distortion of the atomic structure increases in the same order. The distant (second and third) coordination shells of Cu and Ag in sphalerite are split into two subshells, and the splitting is more pronounced for Ag. Analysis of the EXAFS spectra, coupled with the results of DFT (Density Function Theory) simulations, showed that the In–In and Me+–In3+ clustering is absent when the metals are present in the sphalerite solid solution. Therefore, all studied admixtures (In, Cu, Ag), as well as Au, are randomly distributed in the matrix of sphalerite, where the concentration of the elements in the “invisible” form can reach a few tens wt.%.

Description: The Yiliu tungsten polymetallic deposit, located in the south central portion of the Nanling nonferrous metal metallogenic province in South China, is an area with common Yanshanian tectonothermal events. Early Yanshanian magmatism leads to the emplacement of voluminous tungsten-bearing granite intrusions, such as the Baoshan, Benggangling and Junye plutons, which are considered temporally and spatially associated with W-polymetallic mineralization in the Yiliu region. Here, we investigate the basic geological and petrological characteristics of the Junye granites, and present major and trace element geochemical data and bulk-rock Sr-Nd-Pb-Hf isotopic data to gain insight into the petrogenesis and tectonic setting of granitic intrusions in the region. The Junye granites are high-K calc-alkaline and metaluminous to weakly peraluminous [A/CNK = molar ratios of Al2O3/(CaO + Na2O + K2O) = 0.97–1.02] with enrichment in SiO2 (75.68–76.44 wt.%), relatively high total alkalis (K2O + Na2O = 8.06–8.45 wt.%) with K2O/Na2O ratios ranging from 1.12 to 1.42, and moderate Al2O3 (12.62–13.00 wt.%), but low in P2O5 (

Description: In convergent zones, several parts of the geodynamic system (e.g., continental margins, back-arc regions) can be deformed, uplifted, and eroded through time, each of them potentially delivering clastic sediments to neighboring basins. Tectonically driven events are mostly recorded in syntectonic clastic systems accumulated into different kinds of basins: trench, fore-arc, and back-arc basins in subduction zones and foredeep, thrust-top, and episutural basins in collisional settings. The most widely used tools for provenance analysis of synorogenic sediments and for unraveling the tectonic evolution of convergent zones are sandstone petrography and U–Pb dating of detrital zircon. In this paper, we present a comparison of previously published data discussing how these techniques are used to constrain provenance reconstructions and contribute to a better understanding of the tectonic evolution of (i) the Cretaceous transition from extensional to compressional regimes in the back-arc region of the southern Andean system; and (ii) the involvement of the passive European continental margin in the Western Alps subduction system during impending Alpine collision. In both cases, sediments delivered from the down-bending continental block are significantly involved. Our findings highlight its role as a detrital source, which is generally underestimated or even ignored in current tectonic models.

Description: We report on the application of the U-Th-He method for the direct dating of pyrite and provide an original methodological approach for measurement of U, Th and He in single grains without loss of parent nuclides during thermal extraction of He. The U-Th-He age of ten samples of high-crystalline stoichiometric pyrite from unoxidized massive ores of the Uzelga volcanogenic massive sulfide (VMS) deposit, South Urals, is 382 ± 12 Ma (2σ) (U concentrations ~1–5 ppm; 4He ~10−4 cm3 STP g−1). This age is consistent with independent (biostratigraphic) estimations of the age of ore formation (ca, 389–380 Ma) and is remarkably older than the probable age of the regional prehnite-pumpellyite facies metamorphism (~340–345 Ma). Our results indicate that the U-Th-He dating of ~1 mg weight pyrite sample is possible and open new perspectives for the dating of ore deposits. The relative simplicity of U-Th-He dating in comparison with other geochronological methods makes this approach interesting for further application.

Description: There are three provinces in Northern Norway in which occurrences of graphite are abundant; the Island of Senja, the Vesterålen archipelago, and the Holandsfjorden area. From these provinces, we report graphite resources from 28 occurrences. We use a combination of airborne and ground geophysics to estimate the dimensions of the mineralized areas, and, combined with sampling and analysis of the graphite contents, this gives us inferred resources for almost all the occurrences. The average TC (total carbon) content is 11.6%, and the average size is 9.3 Mt or 0.8 Mt of contained graphite. We demonstrate that the Norwegian graphite occurrences have grades and tonnages of the same order of magnitude as reported elsewhere. The graphite-bearing rocks occur in a sequence that encompasses carbonates, meta-arenites, acid to intermediate pyroxene gneisses, and banded iron formations metamorphosed into the granulite facies. Available radiometric dating shows that the graphite-bearing rocks are predated by Archean gneisses and postdated by Proterozoic intrusions of granitic to intermediate compositions.

Description: Froth flotation is a process in which hydrophobic particles attach to bubbles forming particle–bubble aggregates, which are transported to the top section of the cell where they overflow to form the concentrate. Particles also reach the concentrate by entrainment, which is a non-selective process that leads to low concentrate grades. The objective of this work was to study and compare the degree of entrainment measured using three methods, in fresh and seawater, and using methyl isobutyl carbinol (MIBC) and DF-250 as frothers. The experimental results indicated that the degree of entrainment decreased in seawater. Besides, water recovery was lower in the experiments with seawater regardless of the frother that was used in the experiments, which correlated with the observed low degrees of entrainment. It is proposed that the reduction of entrainment and water recovery in seawater can be explained by a reduction of air recovery and/or more bubble coalescence in the froth. It is also proposed that surfactant diffusion/convection from the lamellae to the Plateau borders in the froth is reduced in seawater, which reduces the surface tension gradients, and thus the restoring liquid flow from the Plateau borders to the lamellae.

Description: This research combines a centrifugal test and nuclear magnetic resonance (NMR) technology to study the water retention capacity of the cemented paste backfill. Backfill samples with cement–tailings ratios of 1:4, 1:8, and 1:12, and solid concentrations of 71%, 74%, 77%, 80%, and 83% respectively, were prepared for the test. The relative centrifugal force ( RCF ) required for accurate testing and the T2 cutoff value that characterizes the water retention capacity were obtained through an NMR test on the backfill samples after centrifugation in saturated conditions. Based on the soil–water characteristic curve (SWCC), the NMR pore water characteristic distribution model was established, and the pore size distribution and effective water retention characteristics were analyzed. This study shows that when the rotating speed is between 1500 and 4000 rpm, the R C F of the backfill ranges from 125.8 to 894.4 g/min , and the T2 cutoff value will vary from 3 to 10 ms. With an increase in solid concentration of the backfill, both the RCF and T2 cutoff value decline. The Scanning Electron Microscope (SEM) analysis confirms that an increase in the solid concentration and cement–tailings ratio will lead to obvious bimodal characteristics of the pore size distribution curve of the backfill. In addition, the porosity will decrease, the critical pore value, which represents a value to distinguish pores with different movable fluid retention capabilities and characterizes the pore size classification, will become smaller, and the pore size distribution will become more diverse. These changes indicate that a high-concentration backfill can effectively reduce the flow of a fine-grained matrix with large pores.

Description: The kinetics study has an essential role in the scale-up process because it illustrates the real phenomena of a process. This study aims to develop a mathematical model that can explain the mechanism of the leaching process of laterite ore using a low concentration of the citric acid solution and evaluate that model using the experimental data. As a raw material, this process used powder-shaped limonite laterite ores with a size of 125–150 µm. The leaching process is carried out using 0.1 M citric acid solution, F:S ratio of 1:20, and a leaching time of 2 h. The temperature parameter was varied at 303, 333, and 358 K. The experimental results showed that the higher the operating temperature, the higher the extracted nickel. The results of this experiment were used to evaluate the shrinking core kinetics model and the lumped model. The simulation results for both models show that the lumped model can provide better simulation results. Quantitatively, the percentage of errors from the shrinking core model is around 3.5 times greater than the percentage of errors from using the lumped model. This result shows that in this leaching process, the process mechanism that occurs involves the reactant diffusion step and the chemical reactions step; those steps run simultaneously.

Description: The paper presents new data on mineralogy, geochemistry, and Sr-Nd-Pb isotope systematics of Late Cenozoic eruption products of Uguumur and Bod-Uul volcanoes in the Tesiingol field of Northern Mongolia, with implications for the magma generation conditions, magma sources, and geodynamic causes of volcanism. The lavas and pyroclastics of the two volcanic centers are composed of basanite, phonotephrite, basaltic trachyandesite, and trachyandesite, which enclose spinel and garnet peridotite and garnet-bearing pyroxenite xenoliths; megacrysts of Na-sanidine, Ca-Na pyroxene, ilmenite, and almandine-grossular-pyrope garnets; and carbonate phases. The rocks are enriched in LILE and HFSE, show strongly fractioned REE spectra, and are relatively depleted in U and Th. The low contents of U and Th in Late Cenozoic volcanics from Northern and Central Mongolia represent the composition of a magma source. The presence of carbonate phases in subliquidus minerals and mantle rocks indicates that carbon-bearing fluids were important agents in metasomatism of subcontinental lithospheric mantle. The silicate-carbonate melts were apparently released from eclogitizied slabs during the Paleo-Asian and Mongol-Okhotsk subduction. The parent alkali-basaltic magma may be derived as a result from partial melting of Grt-bearing pyroxenite or eclogite-like material or carobantized peridotite. The sources of alkali-basaltic magmas from the Northern and Central Mongolia plot different isotope trends corresponding to two different provinces. The isotope signatures of megacrysts are similar to those of studied volcanic centers rocks. The P-T conditions inferred for the crystallization of pyroxene and garnet megacrysts correspond to a depth range from the Grt-Sp phase transition to the lower crust. Late Cenozoic volcanism in Northern and Central Mongolia may be a response to stress propagation and gravity instability in the mantle associated with the India-Asia collision.

Description: In the world of construction, cement plays a vital role, but despite its reputation and affordable prices, the cement industry faces multiple challenges due to pollution and sustainability concerns. This study aimed to assess the possibility of utilizing carbonated kimberlite tailings, a waste product from diamond mining, as a partial cement substitute in the preparation of concrete bricks. This is a unique opportunity to help close the gap between fundamental research in mineral carbonation and its industrial implementation to generate commercial products. Kimberlite was subjected to a mild thin-film carbonation process in a CO2 incubator at varying levels of CO2 concentration (10 vol% and 20 vol% at ambient pressure), kimberlite paste moisture content (10 wt% to 20 wt%), and chamber temperature (35 and 50 °C). The formation of magnesium carbonates, in the form of nesquehonite and lansfordite, was verified by X-ray diffraction analysis, and total CO2 uptake was quantified by thermal decomposition in furnace testing. Carbonated kimberlite tailings were then used to cast bricks. Replacement of cement between 10% and 20% were tested, with a constant water-to-binder ratio of 0.6:1, and a cementitious material-to-sand ratio of 1:3. Initial water absorption and 7- and 28-days compressive strength tests were carried out. The results obtained confirm the possibility of using carbonated kimberlite to replace cement partially, and highlight the benefits of carbonating the kimberlite for such application, and recommendations for future research are suggested. This study demonstrates the potential use of mining tailings to prototype the sequestration of CO2 into sustainable building materials to positively impact the increasing demand for cement-based products.

Description: The petrogenesis of the Pridoli to Early Lochkovian granites in the Miramichi Highlands of New Brunswick, Canada, is controversial. This study focuses on the Pridoli Nashwaak Granite (biotite granite and two-mica granite). In situ trace elements and O and Hf isotopes in zircon, coupled with O isotopes in quartz, are used to reveal its magmatic sources and evolution processes. In the biotite granite, inherited zircon cores have broadly homogenous δ18OZrc ranging from +6.7‰ to 7.4‰, whereas magmatic zircon rims have δ18OZrc of +6.3‰ to 7.2‰ and εHf(t) of −0.39 to −5.10. The Hf and Yb/Gd increase with decreasing Th/U. Quartz is isotopically equilibrated with magmatic zircon rims. The biotite granite is interpreted to be solely derived by partial melting of old basement rocks of Ganderia and fractionally crystallized at the fO2 of 10−21 to 10−10 bars. The two-mica granite has heterogeneous inherited zircon cores (δ18OZrc of +5.2‰ to 9.9‰) and rims (δ18OZrc of +6.2‰ to 8.7‰), and εHf(t) of −11.7 to −1.01. The two-mica granite was derived from the same basement, but with supracrustal contamination. This open-system process is also recorded by Yb/Gd and Th/U ratios in zircon and isotopic disequilibrium between magmatic zircon rims and quartz (+10.3 ± 0.2‰).

Description: It has been known that the power ultrasound is used as a pretreatment and rarely applied as a simultaneous method to improve grade and recovery during froth flotation processes. This work aimed at investigating the impact of simultaneously used ultrasonic waves under variant operating configurations on the flotation of representative porphyry copper ore during rougher and re-cleaner stages. For this purpose, four different operating outlines were examined as (I) conventional flotation, (II) homogenizer, (III) ultrasonic bath, and (IV) combination of a homogenizer and an ultrasonic bath. The ultrasonic vibration was generated by the homogenizer (21 kHz, 1 kW) in the froth zone and ultrasonic bath (35 kHz, 0.3 kW) in the bulk zone. The rougher and re-cleaner flotation experiments were conducted using Denver-type mechanically agitated cells with 4.2 and 1 L capacities, respectively. The results showed that using the homogenizer (at 0.4 kW) slightly affected the selectivity separation index of chalcopyrite and pyrite, although it positively increased the grade of chalcopyrite from 21.5% to 25.7%. The ultrasonic-assisted flotation experiments with the ultrasonic bath and its combination with the homogenizer (0.4 kW) (i.e., configurations III and IV) led to an increase of approximately 16.1% and 26.9% in the chalcopyrite selectivity index compared to the conventional flotation, respectively. At the cleaning stage, a lower grade of aluminum silicate-based minerals was obtained desirably in every ultrasonic-treated configuration, which was supported with the water recoveries. Finally, applying the homogenizer and its combination with the ultrasonic bath were recommended for re-cleaner and rougher stages, respectively. Further fundamental and practical knowledge gaps required to be studied were highlighted.

Description: An innovative self-designed medium was packed in a bench-scale flotation column to study its influence on the flotation recovery of bauxite. Computational fluid dynamics (CFD) simulation was conducted to reveal the impact of the packing medium on the turbulent characteristics of collection zone in the column. Simulation results show that multilayer packing of the medium divides the collection zone into small units having different turbulent intensities, which is more suitable for flotation separation. The packing medium decreases the turbulence kinetic energy (from 1.08 × 10−2 m2/s2 to 2.1 × 10−3 m2/s2), turbulence eddy dissipation (from 3.71 × 10−2 m2/s3 to 9.8 × 10−3 m2/s3) and axial fluid velocity of fluid in the column. With three layers of packing, the recovery of Al2O3 increased by 2.11% and the aluminum to silicon content ratio of the concentrate improved from 5.16 to 9.72.

Description: The possibility of using mine wastes (low-sulfide tailings and waste rocks) as cover components to prevent acid mine drainage (AMD) generation from highly reactive tailings was previously investigated through a laboratory-based characterization of reactive tailings and cover materials (Part 1 of this study). Characterization results showed that the reactive tailings are highly acid-generating, and that the mine waste materials that were used in this study are non-acid-generating and have suitable hydrogeological and geochemical properties to be used in a cover with capillary barrier effects (CCBE). In order to further investigate the use of low-sulfide mining materials in the reclamation of highly reactive tailings, a large laboratory-based column and a field cell simulating a CCBE were constructed. The instrumented field cell used the same configuration and materials as the laboratory column. This paper presents the main findings from 504 days (column test) and three seasons (field test) of monitoring, and compares the hydrogeochemical behavior observed at the two scales. The results show that a CCBE made with low-sulfide mine wastes would be efficient at reducing oxygen fluxes and limiting AMD generation from highly reactive tailings at the laboratory and intermediate scale. However, at these two scales, the concentrations of some contaminants were not reduced to levels of the legally imposed environmental objectives. The results also showed differences in metal and sulfate concentrations in the drainage waters between the laboratory and field scales. The outcomes from this investigation highlight that the previous oxygen flux design targets and the typical configurations of multilayer covers developed for fresh non-oxidized tailings or pre-oxidized tailings may not always be directly applicable for fresh or pre-oxidized highly reactive tailings.

Description: Little is known of the influence of fluxes on the nature and the intensity of burning in coal-waste heaps. To gain some insight, two siderite samples, one each from coal-mining waste heaps in Upper- and Lower Silesian Coal Basins (Poland), were heated under identical conditions in a thermal chamber coupled to a powder X-ray diffractometer. Differences in the behaviour of siderite phase and the products of its decomposition, mainly magnetite, wüstite, and olivine, are discussed. The waste heaps sampled underwent self-heating and self-ignition catalysed by fluxes. Though the samples are unlikely to be truly representative of the Silesian basins, the heterogeneous behaviour they displayed on heating merits description and explanation, as siderite is an important widely known flux in pyrometamorphic processes.

Description: This study analysed the fine particle (

Description: A comprehensive examination of the elemental (including radionuclides and heavy metals), mineral, and grain-size composition of sediments from different areas of the Barents Sea was performed. Sediment cores were sampled in the Central Deep, Cambridge Strait (Franz Josef Land Archipelago), Russkaya Gavan’ Bay (Novaya Zemlya Archipelago), and Bear Island Trough. We aim to evaluate how the modern and more ancient environmental conditions are reflected in the elemental and mineral composition, as well as to test indicative elemental ratios. The applied methods include elemental analysis using gamma-ray spectroscopy, X-ray fluorescence (XRF), Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), and X-Ray Difractometry XRD analysis of minerals. Difference in sedimentation rates, grain-size composition, and sources of material, are reflected in downcore variation of Si/Al, Mn/Fe, P/Al, Ti/K, and quartz-feldspar ratios. At boundary Early Holocene/Late Deglaciation, intensive bottom currents from the West-Southern shelf areas contributed to increase of Si/Al and Zr/Ca ratios. Distinct growth of the Si/Fe ratio within the sediments deposited over Late Pleistocene to Mid Holocene may be caused by increased contents of the coarse sand material, as well as by abundant fluxes of clay-mineral-loaded glacial meltwater during the main deglaciation phase. The Mn/Fe ratio used as redox proxy, displayed peaks at different depths related to oxygen concentration growth in bottom water.

Description: The influence of the physical, geometric and chemical properties of particles on the results of aggregate separation by means of a laboratory ring jig is presented in this paper. The experiment was based on separation of chalcedonite particles in a narrow particle size fraction composed separately of regular and irregular particles, which was prepared in accordance with patent inventions. On its basis, the geometric properties—projection diameter and (volumetric and dynamic) shape coefficients—as well as physical properties—particle density—were determined in products of the regular and irregular particles. The terminal settling velocities of the regular and irregular particles were calculated for a randomly selected sample of particles in each obtained separation product. The statistical analysis of the geometric properties of the particles allowed to evaluate the influence of these parameters on aggregate processing with respect to selection of particles homogenous in terms of their shapes. The comparison of the particle shapes’ influence on the chalcedonite feed separation effects was made by the means of the values of the shape coefficients: the dynamic and volumetric ones. Additionally, tests were carried out using Raman spectroscopy in order to determine the mechanisms of density change in the aggregate. The research goal was realised through detecting and analysing the polymorphic forms of the silica and allogenic minerals precipitated on the surface and inside the chalcedonite particles.

Description: In supergene Zn non-sulfide deposits, the Fe-oxy-hydroxides (FeO/OH) are mainly concentrated in the residual zones (gossan) on top of the oxidized ore bodies, although they can also be found throughout the whole weathering profile coexisting with the primary and secondary ore assemblages. Fe-oxy-hydroxides are rarely pure as they form in systems where a wide range of metals, most of them of economic importance (e.g., Zn, Pb, Co, REE, Sc, Ga, Ge, V, etc.), freely circulate and can be “captured” under specific conditions. Although their occurrence can be widespread, and they have a potential to scavenge and accumulate critical metals, FeO/OH are considered gangue phases during the existing processing routes of Zn non-sulfide ores. Moreover, very little is known about the role of the deposit type on the geochemistry of FeO/OH formed in a specific association. Therefore, this paper provides a comprehensive assessment of the trace element footprint of FeO/OH from a number of Zn non-sulfide deposits, in order to define parameters controlling the metals’ enrichment process in the mineral phase. To achieve this, we selected FeO/OH-bearing mineralized samples from four supergene Zn non-sulfide ores in diverse settings, namely Hakkari (Turkey), Jabali (Yemen), Cristal (Peru) and Kabwe (Zambia). The petrography of FeO/OH was investigated by means of scanning electron microscope energy dispersive analysis (SEM-EDS), while the trace element composition was assessed using laser ablation-ICP-MS (LA-ICP-MS). Statistical analyses performed on LA-ICP-MS data defined several interelement associations, which can be ascribed to the different nature of the studied deposits, the dominant ore-formation process and subsequent evolution of the deposits and the environmental conditions under which FeO/OH phases were formed. Based on our results, the main new inferences are: (A) Zinc, Si, Pb, Ga and Ge enrichment in FeO/OH is favored in ores where the direct replacement of sulfides is the dominant process and/or where the pyrite is abundant (e.g., Cristal and Hakkari). (B) When the dissolution of the host-rock is a key process during the supergene ore formation (i.e., Jabali), the buffering toward basic pH of the solutions favors the uptake in FeO/OH of elements leached from the host carbonate rock (i.e., Mn), whilst restricting the uptake of elements derived from the dissolution of sulfides (i.e., Zn, Pb, Ga and Ge), as well as silica. (C) The input of exotic phases can produce significant enrichment in “unconventional” metals in FeO/OH (i.e., Cr and Co at Kabwe; Y at Cristal) depending on whether the optimal pH-Eh conditions are attained. (D) In the Kabwe deposit, FeO/OH records heterogeneous geochemical conditions within the system: where locally basic conditions prevailed during the alteration process, the V and U concentration in FeO/OH is favored; yet conversely, more acidic weathering produced Zn- and Si-bearing FeO/OH.

Description: Karatungk Mine is the second-largest Cu-Ni sulfide mine in China. However, the detailed structure beneath the mine remains unclear. Using continuous waveforms recorded by a dense temporary seismic array, here we apply ambient noise tomography to study the shallow crustal structure of Karatungk Mine down to ~1.3 km depth. We obtain surface-wave dispersions at 0.1–1.5 s by calculating cross-correlation functions, which are inverted for 3D shear-wave structure at the top-most (0–1.3 km) crust by a joint inversion of group and phase dispersions. Our results show that low-velocity zones beneath Y1 ore-hosting intrusion (hereafter called Y1) at 0–0.5 km depth and northwest of the Y2 ore-hosting intrusion (hereafter called Y2) at 0–0.6 km depth are consistent with highly mineralized areas. A relatively high-velocity zone is connected with a weakly mineralized area located to the southeast of Y2 and Y3 (hereafter called Y3) ore-hosting intrusions. Two high-velocity zones, distributed at 0.7–1.3 km depth in the northernmost and southernmost parts of the study area respectively, are interpreted to be igneous rocks related to early magma intrusion. Furthermore, the low-velocity zone at 0.7–1.3 km depth in the middle of the study area may be related to: a possible channel related to initial magma transport; mine strata or a potentially mineralized area. This study demonstrates a new application of dense-array ambient noise tomography to a mining area that may guide future studies of mineralized regions.

Description: The Saudi Arabian Glass Earth Pilot Project is a geophysical exploration program to explore the upper crust of the Kingdom for minerals, groundwater, and geothermal resources as well as strictly academic investigations. The project began with over 8000 km2 of green-field area. Airborne geophysics including electromagnetic (EM), magnetics, and gravity were used to develop several high priority targets for ground follow-up. Based on the results of airborne survey, a spectral induced polarization (SIP) survey was completed over one of the prospective targets. The field data were collected with a distributed array system, which has the potential for strong inductive coupling. This was examined in a synthetic study, and it was determined that with the geometries and conductivities in the field survey, the inductive coupling effect may be visible in the data. In this study, we also confirmed that time domain is vastly superior to frequency domain for avoiding inductive coupling, that measuring decays from 50 ms to 2 s allow discrimination of time constants from 1 ms to 5 s, and the relaxation parameter C is strongly coupled to intrinsic chargeability. We developed a method to fully include all 3D EM effects in the inversion of induced polarization (IP) data. The field SIP data were inverted using the generalized effective-medium theory of induced polarization (GEMTIP) in conjunction with an integral equation-based modeling and inversion methods. These methods can replicate all inductive coupling and EM effects, which removes one significant barrier to inversion of large bandwidth spectral IP data. The results of this inversion were interpreted and compared with results of drill hole set up in the survey area. The drill hole intersected significant mineralization which is currently being further investigated. The project can be considered a technical success, validating the methods and effective-medium inversion technique used for the project.

Description: This paper proposes pre-beneficiation studies by air jigs of the coal layers from a Moatize coal deposit. Pre-beneficiation, also called destoning, removes tailings before the beneficiation plant. The air jigs operate in the same granulometric size range as the heavy-media cyclones (HMCs) that are installed in the preparation plant. With the destoning, the heavy-media circuit operates with a lower coal feed and higher organic matter contents, increasing its cutting efficiency and lowering operational costs. The use of air jigs reduces the total water consumption in the plant, which is especially important for the region where the plant is installed, as water is particularly scarce. Four coal layers of the Moatize coal deposit were studied, which are currently exploited in the mine. As main results of the study, it is possible to say that the concentration of lights (feed of the preparation plant) and heavies (waste fraction) in air jigs can be carried out with reasonable efficiencies for all coal layers studied, making air jigs a feasible option for coal destoning.

Description: Red mud (RM), also called bauxite residue, is a strong alkaline industrial waste generated during the alumina production process. The annual production of RM in China is large, but its average utilization rate is low (only 4%). High generation and low consumption make the disposal of RM mainly by stockpiling, which has caused serious heavy metal pollution and radioactive contamination. In this paper, the various industrial utilization methods of RM in China during the past 60 years have been introduced. Moreover, some recent industrial progresses were referred. The results show that RM can be widely used in building materials, valuable metals extraction, and some novel utilization methods, such as silica-calcium fertilizer, inorganic polymer material and desulfurizer. Most of the industrial utilization methods of RM have been used until now and some successfully applied to other aluminum plants, providing some feasible routes for a large amount utilization of RM. Some industrial utilization methods (such as oil well cement and calcium silicon fertilizer) have not been used due to some problems that cannot be ignored, but it provided a lot of valuable experience and was helpful for the subsequent RM utilization. Moreover, some novel and feasible RM utilization methods were proposed and successfully industrialized, which showed that RM has a broader application prospect. Many actual practices showed that the best way to safely dispose of RM was to develop technology that could consume large amounts of RM or transform it into secondary resources, which may need more time and effort.

Description: In this work, the chemical structural characterization of the erionite-type zeolite from Agua Prieta, Sonora, México, was performed on both pristine and Na, Ca, and Mg exchanged samples in order to identify the various modifications due to cation exchange. The samples investigated were those that showed the best behaviour of CO2 and CH4 adsorption at zero coverage levels and the higher values of surface area reported in our previous studies. According to the crystal-chemical formula (Na3.44K1.96Mg0.63Ca0.62)[Al8.21Si27.79O71.85]·29.63H2O, the pristine sample has been classified as erionite-Na. Morphological FE-SEM investigation performed on both pristine (ERIN) and Na-exchanged samples (ERINa3) showed a similar range of fiber diameters (27–37 nm). The chemical analyses of the ion-exchanged samples evidenced the upload of Ca and Mg following ion exchange with Na. Rietveld analysis results allowed the identification of the chemical structural modification caused by the ion exchange process, occurring mainly at the Ca1 site.

Description: Cenozoic alkali basalts in Southeast (SE) China generally are genetically related to intracontinental rifting. Hence, they can be used to probe the nature of their underlying mantle sources and aid studies of the tectonic background in this region. This paper focuses on the Shanhoujian alkali basalts located in Bailing County, northeastern Fujian, SE China. We herein report their petrology, whole-rock major, and trace element geochemistry, and Sr-Nd isotopic composition and provide a new zircon U-Pb age for the basalts (~40 Ma, Eocene). These data help to constrain the petrogenesis of alkali basalts, their mantle source, and tectonic settings. The basalts are characterized by high Mg# (58.21–63.52) with Na2O/K2O 〉 1. MgO content is weakly correlated with CaO and Cr content but shows no correlation with Ni and Fe2O3 (total). Such features suggest that fractionation of clinopyroxene rather than olivine was important. In terms of trace elements, the alkali basalts display: (1) enrichment in La, Ce, Rb, Ba, Nb, and Ta and depletion in K, Pb, Zr, Hf, and Ti and (2) notable fractionation of light rare earth elements from heavy rare earth elements. Determined (87Sr/86Sr)i is in the range of 0.7041–0.7040 and εNd (t) is between +3.2 and +3.3. The Shanhoujian alkali basalts show a notable affinity to oceanic island basalts (OIBs) with little assimilation of crustal materials. They were derived from a pyroxenite and carbonated peridotite mantle source metasomatized by sediments carried by the subduction plate at different depths. The primary magmas of these basalts were derived from partial melting of this metasomatized mantle source during upwelling of the asthenospheric mantle as an intracontinental rift formed through extension in this part of SE China.

Description: The production of solid mine wastes is an integral part of the extraction and metallurgical processing of ores. The reclamation of highly reactive mine waste, with low neutralizing potential, is still a significant challenge for the mining industry, particularly when natural soils are not available close to the site. Some solid mine wastes present interesting hydro-geotechnical properties which can be taken advantage of, particularly for being used in reclamation covers to control acid mine drainage. The main objective of this research was to evaluate the use of mining materials (i.e., tailings and waste rock) in a cover with capillary barrier effects (CCBE) to prevent acid mine drainage (AMD) from highly reactive tailings. The first part of the project reproduced in this article involves context and laboratory validation of mining materials as suitable for a CCBE, while the companion paper reports laboratory and field results of cover systems made with mining materials. The main conclusions of the Part 1 of this study were that the materials studied (low sulfide tailings and waste rocks) had the appropriate geochemical and hydrogeological properties for use as cover materials in a CCBE. Results also showed that the cover mining materials are not acid-generating and that the LaRonde tailings are highly reactive with pH close to 2, with high concentrations of metals and sulfates.

Description: The southern Bredasdorp Basin, off the south coast of South Africa, is only partly understood in terms of its hydrocarbon potential when compared to the central and northern parts of the basin. Hydrocarbon potential assessments in this part of the basin have been limited, perhaps because the few drilled exploration wells were unproductive for hydrocarbons, yielding trivial oil and gas. The partial integration of data in the southern Bredasdorp Basin provides another reason for the unsuccessful oil and gas exploration. In this study, selected Cretaceous mudrocks and sandstones (wacke) from exploration wells E-AH1, E-AJ1, E-BA1, E-BB1 and E-D3 drilled in the southern part of the Bredasdorp Basin were examined to assess their total organic carbon (TOC), thermal maturity, organic matter type and hydrocarbon generation potential. The organic geochemical results show that these rocks have TOC contents ranging from 0.14 to 7.03 wt.%. The hydrogen index (HI), oxygen index (OI), and hydrocarbon index (S2/S3) values vary between 24–263 mg HC/g TOC, 4–78 mg CO2/g TOC, and 0.01–18 mgHC/mgCO2 TOC, respectively, indicating predominantly Type III and IV kerogen with a minor amount of mixed Type II/III kerogen. The mean vitrinite reflectance values vary from 0.60–1.20%, indicating that the samples are in the oil-generation window. The Tmax and PI values are consistent with the mean vitrinite reflectance values, indicating that the Bredasdorp source rocks have entered the oil window and are considered as effective source rocks in the Bredasdorp Basin. The hydrocarbon genetic potential (SP), normalized oil content (NOC) and production index (PI) values all indicate poor to fair hydrocarbon generative potential. Based on the geochemical data, it can be inferred that most of the mudrocks and sandstones (wackes) in the southern part of the Bredasdorp Basin have attained sufficient burial depth and thermal maturity for oil and gas generation potential.

Description: Corundum is not uncommon on Earth but the gem varieties of ruby and sapphire are relatively rare. Gem corundum deposits are classified as primary and secondary deposits. Primary deposits contain corundum either in the rocks where it crystallized or as xenocrysts and xenoliths carried by magmas to the Earth’s surface. Classification systems for corundum deposits are based on different mineralogical and geological features. An up-to-date classification scheme for ruby deposits is described in the present paper. Ruby forms in mafic or felsic geological environments, or in metamorphosed carbonate platforms but it is always associated with rocks depleted in silica and enriched in alumina. Two major geological environments are favorable for the presence of ruby: (1) amphibolite to medium pressure granulite facies metamorphic belts and (2) alkaline basaltic volcanism in continental rifting environments. Primary ruby deposits formed from the Archean (2.71 Ga) in Greenland to the Pliocene (5 Ma) in Nepal. Secondary ruby deposits have formed at various times from the erosion of metamorphic belts (since the Precambrian) and alkali basalts (from the Cenozoic to the Quaternary). Primary ruby deposits are subdivided into two types based on their geological environment of formation: (Type I) magmatic-related and (Type II) metamorphic-related. Type I is characterized by two sub-types, specifically Type IA where xenocrysts or xenoliths of gem ruby of metamorphic (sometimes magmatic) origin are hosted by alkali basalts (Madagascar and others), and Type IB corresponding to xenocrysts of ruby in kimberlite (Democratic Republic of Congo). Type II also has two sub-types; metamorphic deposits sensu stricto (Type IIA) that formed in amphibolite to granulite facies environments, and metamorphic-metasomatic deposits (Type IIB) formed via high fluid–rock interaction and metasomatism. Secondary ruby deposits, i.e., placers are termed sedimentary-related (Type III). These placers are hosted in sedimentary rocks (soil, rudite, arenite, and silt) that formed via erosion, gravity effect, mechanical transport, and sedimentation along slopes or basins related to neotectonic motions and deformation.

Description: The Fukeshan Cu (Mo) deposit is a newfound porphyry deposit in the northern Great Xing’an Range (GXR), northeast China. In this paper, we present results of chalcopyrite Re–Os geochronology, microthermometry of the fluid inclusions (FIs), and isotopic (H–O–S–Pb) compositions of the Fukeshan Cu (Mo) deposit. Its ore-forming process can be divided into sulfide-barren quartz veins (A vein; stage I), quartz + chalcopyrite + pyrite veins (B vein; stage II), quartz + polymetallic sulfide veins (D vein; stage III), and barren quartz + carbonate ± pyrite veins (E vein; stage IV), with Cu mineralization mainly occurred in stage II. Three types of FIs are identified in this deposit: liquid-rich two-phase (L-type) FIs, vapor-rich two-phase (V-type) FIs, daughter mineral-bearing three-phase (S-type) FIs. The homogenization temperatures of primary FIs hosted in quartz of stages I–IV are 381–494 °C, 282–398 °C, 233–340 °C, and 144–239 °C, with salinities of 7.2–58.6, 4.8–9.9, 1.4–7.9, and 0.9–3.9 wt. % NaCl equivalent, respectively. FIs microthermometry and H–O isotope data suggest that the ore-forming fluids were magmatic in origin and were gradually mixed with meteoric water from stages II to IV. Sulfur and lead isotope results indicate that the ore-forming materials of the Fukeshan Cu (Mo) deposit were likely to have originated from Late Jurassic intrusive rocks. The available data suggest that fluid cooling and incursions of meteoric water into the magmatic fluids were two important factors for Cu precipitation in the Fukeshan Cu (Mo) deposit. Chalcopyrite Re–Os dating yielded an isochron age of 144.7 ± 5.4 Ma, which is similar to the zircon U–Pb age of the quartz diorite porphyry, indicating that Late Jurassic quartz diorite porphyry and Cu mineralization occurred contemporaneously.

Description: The Río Tinto, located in the Iberian Pyrite Belt (SW Spain), constitutes an extreme case of pollution by acid mine drainage. Mining in the area dates back to the Copper Age, although large-scale mining of massive sulfide deposits did not start until the second half of the 19th century. Due to acidic mining discharges, the Río Tinto usually maintains a pH close to 2.5 and high concentrations of pollutants along its course. From a detailed sampling during the hydrological year 2017/18, it was observed that most pollutants followed a similar seasonal pattern, with maximum concentrations during autumn due to the washout of secondary soluble sulfate salts and minimum values during large flood events. Nevertheless, As and Pb showed different behavior, with delayed concentration peaks. The dissolved pollutant load throughout the monitored year reached 5000 tons of Fe, 2600 tons of Al, 680 tons of Zn, and so on. While most elements were transported almost exclusively in the dissolved phase, Fe, Pb, Cr, and, above all, As showed high values associated with particulate matter. River water quality data from 1969 to 2019 showed a sharp worsening in 2000, immediately after the mine closure. From 2001 on, an improvement was observed.

Description: The Vindhyan Basin in central India preserves a thick (~5 km) sequence of sedimentary and lesser volcanic rocks that provide a valuable archive of a part of the Proterozoic (~1800–900 Ma) in India. Here, we present an analysis of key sedimentary pyrite textures and their trace element and sulfur isotope compositions in the Bijaigarh Shale (1210 ± 52 Ma) in the Vindhyan Supergroup, using reflected light microscopy, LA-ICP-MS and SHRIMP-SI, respectively. A variety of sedimentary pyrite textures (fine-grained disseminated to aggregates, framboids, lags, and possibly microbial pyrite textures) are observed reflecting quiet and strongly anoxic water column conditions punctuated by occasional high-energy events (storm incursions). Key redox sensitive or sensitive to oxidative weathering trace elements (Co, Ni, Zn, Mo, Se) and ratios of (Se/Co, Mo/Co, Zn/Co) measured in sedimentary pyrites from the Bijaigarh Shale are used to infer atmospheric redox conditions during its deposition. Most trace elements are depleted relative to Proterozoic mean values. Sulfur isotope compositions of pyrite, measured using SHRIMP-SI, show an increase in δ34S as we move up stratigraphy with positive δ34S values ranging from 5.9‰ (lower) to 26.08‰ (upper). We propose limited sulphate supply caused the pyrites to incorporate the heavier isotope. Overall, we interpret these low trace element signatures and heavy sulfur isotope compositions to indicate relatively suppressed oxidative weathering on land during the deposition of the Bijaigarh Shale.

Description: This paper analyses the mineralogical composition, texture, and structure of a stalactite sampled from the city-wall storerooms of the Nueva Tabarca fortress (southeast Spain). This speleothem presents an uncommon mineral assemblage: aragonite, brucite, gypsum, silica, and halite. Internally, it shows complex structure: (1) a central soda-straw composed by aragonite; (2) an external puff-pastry cone-crust formed preferentially by aragonite and brucite; and (3) an internal branching of coralloids, showing a subtle layering between brucite and aragonite. Gypsum, halite, and silica locate in the outer coating of the cone-crust. The sequent mineral precipitation sequence has been established: aragonite 〉 brucite 〉 gypsum/silica 〉 halite. Speleothem formation is directly related to the chemical weathering of the rocks and mortars used as building materials of the city-wall. Brucite precipitates has been always linked to the presence of MgO-based geomaterials. However, the lack of these compounds as building materials in Nueva Tabarca fortress makes this investigation a unique example of brucite precipitation. PHREEQC calculations showed that interaction between pore waters and the minerals of mortar aggregates (dolomite, pyroxene, and amphibole) leads to rich-magnesium solutions. Evaporation modelling of lixiviated waters describes the precipitation of the mineral assemblage of the brucite-aragonite speleothems.

Description: A review of the crystal chemistry of Fe-deficient eudialyte-group minerals is given. Specific features of cation distribution over key sites in the crystal structure, including partial substitution of Fe2+ with Na, Mn and Zr at the M2 site are discussed. It is concluded that Na-dominant (at the M2 site) eudialyte-group members (M2Na-EGMs) are markers of specific kinds of specific peralkaline (hyperagpaitic) igneous rocks and pegmatites. New data are obtained on the chemical composition, IR spectra and crystal chemistry for two samples of M2Na-EGMs with disordered M1 cations, which are a potentially new mineral species with the simplified formula (Na,H2O)15Ca6Zr3[Na2(Fe,Zr)][Si26O72](OH)2Cl·nH2O.

Description: The Kuergasheng Pb–Zn deposit is located in the Western Tianshan Orogen, Xinjiang Province, China. The ore bodies are mainly hosted in sandstone of the Tuosikuertawu Formation and are controlled by NW-trending faults. Three paragenetic stages were identified: early pyrite–chalcopyrite–quartz veins (stage 1), middle galena–sphalerite–quartz veins (stage 2), and late sulfide-poor calcite–quartz veins (stage 3). Fluid inclusions (FIs) include liquid-rich aqueous (LV-type), vapor-rich aqueous (VL-type), halite-bearing (S-type), and monophase liquid aqueous (L-type). Homogenization temperatures for FIs from stages 1–3 are 221–251, 173–220, and 145–172 °C, respectively. Stage 1 fluids in LV-, VL-, and S-type FIs yield salinities of 6.2–9.6, 1.7–3.1, and 32.7–34.9 wt % NaCl equiv., respectively. Stage 2 fluids in LV- and S-type FIs have salinities of 5.1–7.9 and 31.9–32.1 wt % NaCl equiv., respectively. Stage 3 fluids in LV- and L-type FIs have salinities of 3.4–5.9 wt % NaCl equiv. Oxygen, hydrogen, and carbon isotopic data (δ18OH2O = −7.7 to 1.7‰, δDH2O = −99.2 to −83.1‰, δ13CH2O = −16.6 to 9.1‰) indicate that the ore-forming fluids have a hybrid origin —an initial magmatic source with input of meteoric water becoming dominant in the later stage. Sulfur and lead isotopic data for galena (δ34S = 5.6 to 6.9‰, 206Pb/204Pb = 18.002–18.273, 207Pb/204Pb = 15.598–15.643, 208Pb/204Pb = 38.097–38.209) reveal that the ore-forming materials were mainly derived from the Beidabate intrusive body and the Tuosikuertawu Formation.

Description: Carbon Capture Utilization and Storage (CCUS) has been substantiated by the International Panel on Climate Change (IPCC) [...]

Description: Direct dating of petroleum systems by hydrocarbon or associated authigenic minerals is crucial for petroleum system analysis and hydrocarbon exploration. The precipitation of authigenic pyrite in petroliferous basins is commonly genetically associated with hydrocarbon generation, migration, accumulation, or destruction. Pyrite rubidium-strontium (Rb-Sr) isotope dilution thermal ionization mass spectrometry (ID-TIMS) is a well-developed technique, and its successful application for high-temperature ore systems suggests that this dating method has the potential to directly date key processes in the low-temperature petroleum systems. Rb-Sr data for pyrites in two Ordovician carbonate rock specimens collected from ~4952 m in the YD-2 well in the Yudong region, northern Tarim Basin (NW China), yield two identical isochron ages within analytical uncertainties: 206 ± 13 (2σ) and 224 ± 28 Ma (2σ). SEM investigations demonstrate that Rb and Sr atoms mainly reside in the crystal lattice of the pyrites due to the absence of fluid and mineral inclusions. The rigorous Rb-Sr isochron relations documented in the samples indicate that such residency can result in sufficient Rb/Sr fractionation and initial Sr isotopic homogenization for geochronology. In addition, the closure temperature (227–320 °C) for the Rb-Sr isotope system in pyrite is higher than the precipitation temperature for pyrite in petroleum-related environments (below 200 °C), suggesting that the Rb-Sr age of pyrite was not overprinted by post-precipitation alteration. Integrating the lead-strontium-sulfur isotopes of the pyrites with burial history analysis, the ages are interpreted as the timing of alteration of the paleo-oil pool by a hydrothermally-triggered thermochemical sulfate reduction process. This study, for the first time, demonstrates that Rb-Sr pyrite geochronology, combined with radiogenic and stable isotopic analyses, can be a useful tool to evaluate the temporal evolution of oil pools. This approach bears great potential for dating of petroleum systems anywhere else in the world.

Description: Modeling the global markets is complicated due to the existence of uncertainty in the information available. In addition, the lithium supply chain presents a complex network due to interconnections that it presents and the interdependencies among its elements. This complex supply chain has one large market, electric vehicles (EVs). EV production is increasing the global demand for lithium; in terms of the lithium supply chain, an EV requires lithium-ion batteries, and lithium-ion batteries require lithium carbonate and lithium hydroxide. Realistically, the mass balance in the global lithium supply chain involves more elements and more markets, and together with the assortment of databases in the literature, make the modeling through deterministic models difficult. Modeling the global supply chain under uncertainty could facilitate an assessment of the lithium supply chain between production and demand, and therefore could help to determine the distribution of materials for identifying the variables with the highest importance in an undersupply scenario. In the literature, deterministic models are commonly used to model the lithium supply chain but do not simultaneously consider the variation of data among databases for the lithium supply chain. This study performs stochastic modeling of the lithium supply chain by combining a material flow analysis with an uncertainty analysis and global sensitivity analysis. The combination of these methods evaluates an undersupply scenario. The stochastic model simulations allow a comparison between the known demand and the supply calculated under uncertainty, in order to identify the most important variables affecting lithium distribution. The dynamic simulations show that the most probable scenario is one where supply does not cover the increasing demand, and the stochastic modeling classifies the variables by their importance and sensibility. In conclusion, the most important variables in a scenario of EV undersupply are the lithium hydroxide produced from lithium carbonate, the lithium hydroxide produced from solid rock, and the production of traditional batteries. The global sensitivity analysis indicates that the critical variables which affect the uncertainty in EV production change with time.

Description: We present new structural, petrographic, geochemical and geochronological data for the late Paleozoic–early Mesozoic granites and associated igneous rocks of the Taimyr Peninsula. It is demonstrated that large volumes of granites were formed due to the oblique collision of the Kara microcontinent and the Siberian paleocontinent. Based on U-Th-Pb isotope data for zircons, we identify syncollisional (315–282 Ma) and postcollisional (264–248 Ma) varieties, which differ not only in age but also in petrochemical and geochemical features. It is also shown that as the postcollisional magmatism was coming to an end, Siberian plume magmatism manifested in the Kara orogen and was represented by basalts and dolerites of the trap formation (251–249 Ma), but also by differentiated and individual intrusions of monzonites, quartz monzonites and syenites (Early–Middle Triassic) with a mixed crustal-mantle source. We present a geodynamic model for the formation of the Kara orogen and discuss the relationship between collisional and trap magmatism.

Description: Gravity migration is a fast imaging technique based on the migration concept to obtain subsurface density distribution. For higher resolution of migration imaging results, we propose a 3D regularized focusing migration method that implements migration imaging of an entire gravity survey with a focusing stabilizer based on regularization theory. When determining the model parameters, the iterative direction is chosen as the conjugate migration direction, and the step size is selected on the basis of the Wolfe–Powell conditions. The model tests demonstrate that the proposed method can improve the resolution and precision of imaging results, especially for blocky structures. At the same time, the method has high computational efficiency, which allows rapid imaging for large-scale gravity data. It also has high stability in noisy conditions. The developed novel method is applied to interpret gravity data collected from the skarn-type iron deposits in Yucheng, Shandong province. Migration results show that the depth of the buried iron ore in this area is 750–1500 m, which is consistent with the drilling data. We also provide recommendations for further mineral exploration in the survey area. This method can be used to complete rapid global imaging of large mining areas and it provides important technical support for exploration of deep, concealed deposits.

Description: Linear regression is often used as a diagnostic tool to understand the relative contributions of operational variables to some key performance indicator or response variable. However, owing to the nature of plant operations, predictor variables tend to be correlated, often highly so, and this can lead to significant complications in assessing the importance of these variables. Shapley regression is seen as the only axiomatic approach to deal with this problem but has almost exclusively been used with linear models to date. In this paper, the approach is extended to random forests, and the results are compared with some of the empirical variable importance measures widely used with these models, i.e., permutation and Gini variable importance measures. Four case studies are considered, of which two are based on simulated data and two on real world data from the mineral process industries. These case studies suggest that the random forest Shapley variable importance measure may be a more reliable indicator of the influence of predictor variables than the other measures that were considered. Moreover, the results obtained with the Gini variable importance measure was as reliable or better than that obtained with the permutation measure of the random forest.

Description: The Leptothrix species, Fe-oxidizing bacteria, produce an extracellular, microtubular sheath with a complicated organic–inorganic hybrid nature. We have discovered diverse industrial functions for this material, e.g., electrode material for Li-ion batteries, catalyst enhancers, pigments, plant growth promoters, and plant protectants. To consistently obtain material with the qualitative and quantitative stability needed for industrial applications, we focused on developing an optimum culture system for sheath synthesis by the Leptothrix sp. strain OUMS1. Although we have used Fe plates as an Fe source in the liquid silicon-glucose-peptone medium (SGP), the plates do not yield a consistent quality or precise mass, and formation of Fe-encrusted sheath is restricted to a surface of the plates, which limits harvest yield. In this study, to obtain a high yield of sheaths, we cultured OUMS1 in SGP supplemented with Fe powders. The addition of Fe powders to the medium (up to 14.0 g/L) did not adversely influence growth of OUMS1. The final yield of sheaths was about 10-fold greater than in the Fe plate culture. The sheaths also maintained a microtubular form and crystalline texture similar to those produced on Fe plates in SGP. The results proved the usefulness of Fe powder for consistently high yields of Fe-encrusted sheaths of stable quality.

Description: The structural changes along the c axis, of the Ba-exchanged montmorillonite (Swy-2-Ba), under variable relative humidity (% RH), is investigated. In this regard, the arrangement, amount and position of both exchangeable cation and the water molecules in the interlamellar space (IS), are evaluated. This aim is achieved using the X-ray diffraction (XRD) profile modeling approach that consists of comparing experimental and theoretical patterns calculated from structural models. The contributions of the hydration states and the interlayer water amounts, as a function of the % RH, are registered by quantitative XRD investigation. The validated structural models are heterogeneous, suggesting various proportions of layer types at different RH ranges, which means the coexistence of different mixed layer structure MLS packages, exhibiting different proportions of layers with contrasting hydration states. This result is attributed to the orientation of the applied hydration sequence. Indeed, the interlayer water molecule amounts, which led to the appearance of a logic hydration hysteresis, are strongly affected by hydrous perturbation.

Description: The Canadian Nuclear Laboratories (CNL) is developing a long-term management strategy for its existing inventory of solid radioactive cemented wastes, which contain uranium, mercury, fission products, and a number of minor elements. The composition of the cemented radioactive waste poses significant impediments to the extraction and recovery of uranium using conventional technology. The goal of this research was to develop an innovative method for uranium, mercury and cesium recovery from surrogate radioactive cemented waste (SRCW). Leaching using sulfuric acid and saline media significantly improves the solubilization of the key elements from the SRCW. Increasing the NaCl concentration from 0.5 to 4 M increases the mercury solubilization from 82% to 96%. The sodium chloride forms a soluble mercury complex when mercury is present as HgO or metallic mercury but not with HgS that is found in 60 °C cured SRCW. Several leaching experiments were done using a sulfuric acid solution with KI to leach SRCW cured at 60 °C and/or aged for 30 months. Solubilization yields are above 97% for Cs and 98% for U and Hg. Leaching using sulfuric acid and KI improves the solubilization of Hg by oxidation of Hg0, as well as HgS, and form a mercury tetraiodide complex. Hg and Cs were selectively removed from the leachate prior to uranium recovery. It was found that U recovery from sulfuric leachate in iodide media using the resin Lewatit TP260 is very efficient. Considering these results, a process including effluent recirculation was applied. Improvements of solubilization due to the recycling of chemical reagents were observed during effluent recirculation.

Description: Sudden falls of large-area hard roofs in a mined area release a large amount of elastic energy, generate dynamic loads, and cause disasters such as impact ground pressure and gas outbursts. To address these problems, in this study, the sleeve fracturing method (SFM) was applied to weaken a hard roof. The numerical simulation software FLAC3D was used to develop three models based on an analysis of the SFM working mechanism. These models were applied to an analysis of the fracturing effects of various factors such as the borehole diameter, hole spacing, and sleeve pressure. Finally, the results of a simulation were validated using experiments with similar models. Our research indicated the following: (1) The crack propagation directions in the models were affected by the maximum principal stress and hole spacing. When the borehole diameter was fixed, the fracturing pressure increased with increasing hole spacing. In contrast, when the fracturing pressure was fixed, the fracturing range increased with increasing borehole diameter; (2) The most ideal fracturing effect was found at a fracturing pressure of 17.6 MPa in the model with a borehole diameter of 40 mm and hole spacing of 400 mm. The results showed that it is possible to regulate the falls of hard roofs using the SFM. This research may provide a theoretical basis for controlling hard roofs in mining.

Description: Iron(III) hydrolysis in the presence of chloride ions yields akaganéite, an iron oxyhydroxide mineral with a tunnel structure stabilized by the inclusion of chloride. Yet, the interactions of this anion with the iron oxyhydroxide precursors occurring during the hydrolysis process, as well as its mechanistic role during the formation of a solid phase are debated. Using a potentiometric titration assay in combination with a chloride ion-selective electrode, we have monitored the binding of chloride ions to nascent iron oxyhydroxides. Our results are consistent with earlier studies reporting that chloride ions bind to early occurring iron complexes. In addition, the data suggests that they are displaced with the onset of oxolation. Chloride ions in the akaganéite structure must be considered as remnants from the early stages of precipitation, as they do not influence the basic mechanism, or the kinetics of the hydrolysis reactions. The structure-directing role of chloride is based upon the early stages of the reaction. The presence of chloride in the tunnel-structure of akagenéite is due to a relatively strong binding to the earliest iron oxyhydroxide precursors, whereas it plays a rather passive role during the later stages of precipitation.

Description: Although risk management tools are put to good use in many industrial sectors, some large projects have been met with numerous problems due to failure to take occupational health and safety (OHS) into consideration. In spite of the high level of risk and uncertainty associated with many industrial projects, the number of studies of methods for managing all known risks systematically remains small. Under effervescent economic conditions, industries must meet several challenges associated with frequent project start-ups. In highly complex and uncertain environments, rigorous management of risk remains indispensable for avoiding threats to the success of projects. Many businesses seek continually to create and improve integrated approaches to risk management. This article puts into perspective the complexity of the challenge of integrating OHS into industrial project risk management. A conceptual and methodological approach is proposed to guide future research focused on meeting this challenge. The approach is based on applying multi-disciplinary research modes to a complex industrial context in order to identify all scenarios likely to contain threats to humans or the environment. A case study is used to illustrate the potential of the proposed approach for application and its contribution to meeting the challenge of taking OHS into consideration. On-site researchers were able to develop a new approach that helped two mining companies in Quebec (Canada) to achieve successful integration of OHS into expansion projects.

Description: Bioleaching is the mobilization of metal cations from insoluble ores by microorganisms. Biofilms can enhance this process. Since Sulfobacillus often appears in leaching heaps or reactors, this genus has aroused attention. In this study, biofilm formation and subsequent pyrite dissolution by the Gram-positive, moderately thermophilic acidophile Sulfobacillus thermosulfidooxidans were investigated. Five strategies, including adjusting initial pH, supplementing an extra energy source or ferric ions, as well as exchanging exhausted medium with fresh medium, were tested for enhancement of its biofilm formation. The results show that regularly exchanging exhausted medium leads to a continuous biofilm development on pyrite. By this way, multiply layered biofilms were observed on pyrite slices, while only monolayer biofilms were visible on pyrite grains. In addition, biofilms were proven to be responsible for pyrite leaching in the early stages.

Description: Volcanic layers in coal seams in southwestern China coalfields have received much attention given their significance in coal geology studies and their potential economic value. In this study, the mineralogical and geochemical compositions of C19 and C25 coal seams were examined, and the following findings were obtained. (1) Clay minerals in sample C19-r are argillized, and sedimentary layering is not observed. The acicular idiomorphic crystals of apatite and the phenocrysts of Ti-augite coexisting with magnetite in roof sample C19-r are common minerals in basaltic rock. The rare earth elements (REE) distribution pattern of C19-r, which is characterized by positive Eu anomalies and M-REE enrichment, is the same as that of high-Ti basalt. The concentrations of Ti, V, Co, Cr, Ni, Cu, Zn, Nb, Ta, Zr, and Hf in C19-r are closer to those of high-Ti basalt. In conclusion, roof sample C19-r consists of tuffaceous clay, probably with a high-Ti mafic magma source. (2) The geochemical characteristics of the C25 coals are same as those reported for coal affected by alkali volcanic ash, enrichment in Nb, Ta, Zr, Hf, and REE, causing the C25 minable coal seams to have higher potential value. Such a vertical study of coals and host rocks could provide more information for coal-forming depositional environment analysis, for identification of volcanic eruption time and magma intrusion, and for facilitating stratigraphic subdivision and correlation.

Description: At the industrial scale, bioleaching of metal sulfides includes two main technologies, tank leaching and heap leaching. Fluctuations in temperature caused by the exothermic reactions in a heap have a pronounced effect on the growth of microbes and composition of mixed microbial populations. Currently, little is known on the influence of pre-colonized mesophiles or moderate thermophiles on the attachment and bioleaching efficiency by thermophiles. The objective of this study was to investigate the interspecies interactions of the moderate thermophile Sulfobacillus thermosulfidooxidans DSM 9293T and the thermophile Acidianus sp. DSM 29099 during initial attachment to and dissolution of pyrite. Our results showed that: (1) Acidianus sp. DSM 29099 interacted with S. thermosulfidooxidansT during initial attachment in mixed cultures. In particular, cell attachment was improved in mixed cultures compared to pure cultures alone; however, no improvement of pyrite leaching in mixed cultures compared with pure cultures was observed; (2) active or inactivated cells of S. thermosulfidooxidansT on pyrite inhibited or showed no influence on the initial attachment of Acidianus sp. DSM 29099, respectively, but both promoted its leaching efficiency; (3) S. thermosulfidooxidansT exudates did not enhance the initial attachment of Acidianus sp. DSM 29099 to pyrite, but greatly facilitated its pyrite dissolution efficiency. Our study provides insights into cell-cell interactions between moderate thermophiles and thermophiles and is helpful for understanding of the microbial interactions in a heap leaching environment.

Description: Representative perlite bulk rock samples from two areas of Milos Island, Greece were collected and the expansion properties of their industrial product were investigated. Coarse crude perlite from Tsigrado exhibits better expansibility, which is assigned to the presence of coarser crystallites in its bulk parent rock. During thermal treatment, the finer crystallites of the coarse crude perlite from Trachilas are entrapped in the groundmass and lead to overheating, which inhibits expansion and eventually results in shrinkage. Geochemical modification of the expanded perlites relative to their crude precursors were investigated, using the isocon method. Volatilisation of crystalline water is the main factor controlling mass reduction of the expanded perlites. Other elements, during the adequate expansion of the Tsigrado perlite, can be classified into three categories. The elements that participate preferentially in crystals decrease in the expanded material at amounts higher than the total mass loss of the rock, due to their escape controlled mainly by the removal of the crystalline phases. The elements equally participating in crystals and the groundmass show losses equivalent to the total mass loss of the rocks, as they escaped in the crystalline phases and airborne particles from the groundmass during thermal treatment. Decrease of highly incompatible elements, which mostly participate in the groundmass, in the expanded products is less than the total mass loss, as they escaped mainly in the airborne particles. The inadequate expansion and burst of the Trachilas perlite did not allow for a similar categorisation, due to random and unpredictable escape of the elements. We propose the application of this method to an artificial system to predict unexpandable mineral phases in bulk perlite, as well as elements that are most likely to participate in the amorphous perlite phase, which cannot be determined from a regular industrial production line. This graphical method may also predict environmental pollution of the atmosphere from the release of volatile compounds and airborne particles during thermal treatment of perlite or other processes of mineral treatment.

Description: Carbon dioxide (CO2) is considered one of the most important greenhouse gases in the study of climate change. CO2 adsorption was studied using the gas chromatography technique, while the Freundlich and Langmuir adsorption models were employed for processing isotherm data in the temperature range of 473–573 K. The isosteric heat of adsorption was calculated from the Clausius–Clapeyron equation. Moreover, the thermodynamic properties ΔG, ΔU, and ΔS were evaluated from the adsorption isotherms of Langmuir using the Van’t Hoff Equation. The four soil samples were recollected from San Juan Amecac, Puebla, Mexico, and their morphologies were investigated through X-ray diffraction (XRD) and N2 adsorption at 77 K. The SJA4 soil has a crystalline Kaolinite phase, which is one of its non-metallic raw materials, and N2 isotherms allowed for the determination of pore size distributions and specific surface areas of soil samples. The Barrett–Joyner–Halenda (BJH) distribution of pore diameters was bimodal with peaks at 1.04 and 3.7 nm, respectively. CO2 adsorption showed that the SJA1 soil afforded a higher amount of adsorbed CO2 in the temperature range from 453 to 573 K followed by SJA4 and finally SJA2, classifying this process as exothermic physisorption.

Description: Agate nodules from Kerrouchen (Khénifra Province, Meknés-Tafilalet Region) in Morocco occur in Triassic basalts and reach up to 30 cm in diameter. Monocentric, banded agates—mainly in pastel pink, grey, white and yellow—with infiltration canals (osculum) are observed. Raman microspectroscopy revealed that the agates mainly consist of low quartz and subordinately moganite with distinctive 460 and 501 cm−1 marker bands, respectively. Linear mapping indicated that moganite mainly concentrates in grey zones of the monocentric agate nodules. The other types, polycentric and pseudostalactitic agates, are usually brown and red and contain minerals such as hematite and goethite. They form both regular and irregular mosaics rich in ornamentation. Occasionally, aggregates of copper sulphides or titanium oxides (rutile) can also be observed. These minerals are sometimes accompanied by carbonaceous material marked by 1320 and 1585 cm−1 Raman bands. It seems that formation of agates from Kerrouchen was induced by Si-rich and Fe-moderate fluids. Copper sulphides, rutile, and carbonates (possibly calcite) were most likely incorporated during post-magmatic processes. The origin of solid bitumen can be the result of hydrothermal or hypergenic processes.

Description: A relevant research effort is devoted to the synthesis and characterization of phases belonging to the ternary system Cu–Sn–S, mainly for their possible applications in semiconductor technology. Among all ternary phases, kuramite, Cu3SnS4, mohite, Cu2SnS3, and Cu4Sn7S16 have attracted the highest interest. Numerous studies were carried out claiming for the description of new phases in the ternary compositional field. In this study, we revise the existing literature on this ternary system, with a special focus on the phases stable in a temperature range at 25 °C. The only two ternary phases observed in nature are mohite and kuramite. Their occurrence is described as very rare. A numerical modelling of the stable solid phases in contact with a water solution was underwent to define stability relationships of the relevant phases of the system. The numerical modelling of the Eh-pH diagrams was carried out through the phreeqc software with the lnll.dat thermodynamic database. Owing to the complexity of this task, the subsystems Cu–O–H, Sn–O–H, Cu–S–O–H and Sn–S–O–H were firstly considered. The first Pourbaix diagram for the two naturally relevant ternary phases is then proposed.

Description: The impact of methane explosions on mining operations can never be over-emphasized. The safety of miners could be threatened and local ventilation facilities are likely to be damaged by the flame and overpressure induced by a methane explosion event, making it essential to understand the destructiveness and influence range of a specific explosion. In this paper, the attenuation effect of geometric changes, most commonly bends, obstacles, and branches, present in the way of blast-wave propagation and the capability of the selected numerical model were studied. Although some relevant experimental research has been provided, quantitative analysis is insufficient. This paper investigates the attenuation factors of seven bends, three obstacles, and two T-branch scenarios to ascertain a better insight of this potentially devastating event quantitatively. The results suggest that (1) the numerical model used is capable of predicting four of the seven validated scenarios with a relative error less than 12%; (2) the maximum peak overpressure is obtained when the angle equals 50° for bend cases; and (3) the selected numerical scheme would overestimate the obstacle cases by around 15%.

Description: Due to the low grade of V2O5 in stone coal, the existing vanadium extraction technologies face challenges in terms of large handling capacity, high acid consumption and production cost. The pre-concentration of vanadium from stone coal before the extraction process is an effective method to reduce cost. In this study, detailed mineral characterization of stone coal was investigated. It has been confirmed that the vanadium mainly occurs in muscovite and illite. A significant demand for an effective pre-concentration process with simple manipulation for discarding quartz and other gangue minerals is expected. Based on the mineralogical study, a new vanadium pre-concentration process using a fine mineral spiral was investigated. The experimental results showed that the separation process, which was comprised of a rougher and scavenger, could efficiently discard quartz, pyrite and apatite. A final concentrate with V2O5 grade of 1.02% and recovery of 89.6% could be obtained, with 26.9% of the raw ore being discarded as final tailings.

Description: The recovery of gold by ore leaching is influenced by the size of the particles and the chemical environment. The effect of particle size on the dissolution of gold is usually studied using mono-size particles as the gold in solution comes from the ore of a unique leached particle size. This paper proposes a method to estimate the gold dissolution as a function of particle size using a bulk ore sample, i.e., with the dissolved gold coming from the various sizes of particles carried by the ore. The results are consistent with the fact that gold dissolution increases with the decreasing particle size but results also indicate that gold dissolution of the ore within a size interval is not significantly affected by the grinding time used for the ore size reduction. Results also show a good dissolution of the gold contained in the fine-size fractions without oxidation and lead nitrate pre-treatment for an ore that is known to require such pre-treatment.

Description: In this paper, a surfactant, atlox4862 (formaldehyde condensate of methyl naphthalene sulfonic sodium salt) (MF), was introduced as a depressant for reverse flotation separation of sericite from graphite. Natural flake graphite has a strong hydrophobic property. After interacting with MF, the graphite became moderately hydrophilic. The flotation results showed that MF had a depressing ability for both sericite and graphite and that the flotation separation of sericite from graphite was attributed to the different declining levels of recovery between graphite and sericite with increased MF concentration. For a pulp pH of 8 and a MF concentration of 250 mg/L, the recovery rates of sericite and graphite were 89.7% and 11.3%, respectively. The results of the FTIR spectra and zeta potential measurements demonstrated that the interaction of MF with graphite and sericite is mainly through electrostatic attraction. MF was preferred to adsorb on the surface of graphite, decreasing its zeta potential and improving its hydrophilicity more than that of sericite.

Description: The Upper No. 3 coal of the Early Permian age is a major workable seam in the southwestern Shandong coalfield, which is located in the eastern part of North China. From Early Jurassic to Neogene, the coalfield was subjected to intensive tectonic processes, leading to a significant rearrangement in depth of coal seams. In this paper, three Upper No. 3 coals occurring at −228, −670 and −938 m in the Luxi, Liangbaosi, and Tangkou mines, respectively, were collected to investigate their mineralogical and geochemical characteristics, with emphasis on modes of occurrence and origin of epigenetic minerals. The three coal seams are similar in vitrinite reflectance, volatile matter yield, and maceral components, suggesting insignificant influence from the tectonic activities on coal rank. Terrigenous minerals (e.g., kaolinite and quartz) are comparable in both types and distribution patterns in the three coals. The presence of siderite and pyrite of syngenetic or penecontemporaneous origin indicate they were emplaced during peat accumulation. The distribution of epigenetic minerals (e.g., calcite, ankerite, and dolomite) are associated with the underground water activities, which were Ca (Mg, Fe)-bearing.

Description: The integrated disposal of surface subsidence pits and surface solid waste can be realized by backfilling a surface subsidence area with a paste made from the solid wastes of mines, such as tailings and waste rock. The microstructures of these wastes determine the macroscopic properties of a paste backfill. This paper presents an experimental study on the internal structure evolution of pasty fluid mixed with different waste rock concentrations (10%, 30%, and 50%) and cement dosages (1% and 2%) under damage. To this end, a real-time computed tomography (CT) scan is conducted using medical CT and a small loading device. Results show that UCS (uniaxial compressive strength) increases when the amount of cement increases. Given a constant amount of cement, UCS increases first and then decreases as waste rock content increases. UCS is maximized at 551 kPa when the waste rock content is 30%. The paste body is a typical medium used to investigate initial damage, which mainly consists of microholes, pores, and microcracks. The initial damages also exhibit a high degree of random inhomogeneity. After loading, cracks are initiated and expand gradually from the original damage location until the overall damages are generated. The mesostructure evolution model of the paste body is divided into six categories, and this mesostructure is reasonable when the waste rock content is 30%.

Description: In the field of microbial biomineralization, much of the scientific attention is focused on processes carried out by prokaryotes, in particular bacteria, even though fungi are also known to be involved in biogeochemical cycles in numerous ways. They are traditionally recognized as key players in organic matter recycling, as nutrient suppliers via mineral weathering, as well as large producers of organic acids such as oxalic acid for instance, an activity leading to the genesis of various metal complexes such as metal-oxalate. Their implications in the transformation of various mineral and metallic compounds has been widely acknowledged during the last decade, however, currently, their contribution to the genesis of a common biomineral, calcite, needs to be more thoroughly documented. Calcite is observed in many ecosystems and plays an essential role in the biogeochemical cycles of both carbon (C) and calcium (Ca). It may be physicochemical or biogenic in origin and numerous organisms have been recognized to control or induce its biomineralization. While fungi have often been suspected of being involved in this process in terrestrial environments, only scarce information supports this hypothesis in natural settings. As a result, calcite biomineralization by microbes is still largely attributed to bacteria at present. However, in some terrestrial environments there are particular calcitic habits that have been described as being fungal in origin. In addition to this, several studies dealing with axenic cultures of fungi have demonstrated the ability of fungi to produce calcite. Examples of fungal biomineralization range from induced to organomineralization processes. More examples of calcite biomineralization related to direct fungal activity, or at least to their presence, have been described within the last decade. However, the peculiar mechanisms leading to calcite biomineralization by fungi remain incompletely understood and more research is necessary, posing new exciting questions linked to microbial biomineralization processes.

Description: Stannite group minerals (ferrokësterite and stannite) occur in small amounts in association with sulfides in hydrothermal Pb-Zn deposits in Kosovo. The chemical composition of sphalerite co-existing with Sn-bearing minerals has been investigated using laser ablation inductively-coupled plasma mass spectrometry (LA-ICP-MS). Flat Sn-spectra suggest that Sn is bound in the sphalerite lattice or as nanoincluions. Sphalerite from Stan Terg, overgrown by ferrokësterite, contains the lowest Sn content (few ppm) and have been precipitated before Sn-enrichment in the fluids. The highest value of Sn (520 ppm) of Stan Terg sphalerite was obtained directly close to the ferrokësterite rim, and indicates a rapid increase of Sn in the hydrothermal fluids. Significantly higher values of Sn in sphalerite were obtained from other deposits: 1600 ppm (Artana), up to 663 ppm (Kizhnica), up to 2800 ppm (Drazhnje). Stannite-sphalerite geothermometry revealed the following ore-forming temperatures for the Kosovo mineralization: 240–390 °C for Stan Terg, 240–370 °C for Artana, >340 °C for Kizhnica, and 245–295 °C for Drazhnje. Sphalerite and stannite group minerals precipitated simultaneously during cooling from reduced hydrothermal fluids and under low-sulfidation fluid states. Fluctuations in physico-chemical fluid conditions are evidenced by the presence of stannite group minerals along growth zones in sphalerite and may be related to short interval of magmatic pulses during ore deposition.

Description: Because of the acute toxicity of Cr(VI)-bearing substances, the pollution problem caused by chromite process residue has become a worldwide concern. In the view of relevant studies, the technologies based on the alkali treatment cannot fundamentally resolve the pollution problem, because the oxidation of Cr(III) to Cr(VI) is unavoidable during chromite decomposition. In contrast, the oxidation of Cr(III) to Cr(VI) can be controlled by the sulfuric acid treatment of chromite, and the Cr(VI) pollution can be eliminated from the original source of production. Many research studies focusing on the resolutions of the key obstacles hindering the development of the sulfuric acid treatment process have been carried out, and significant progress has been achieved. In this study, a clean hydrometallurgical process without the generation of hexavalent chromium is demonstrated. First, the chromite was decomposed and leached by sulfuric acid solution in the presence of an oxidant. Then, iron was hydrothermally removed from the acid solution as the precipitate of jarosite. Finally, chromium salts were obtained by adjusting the basicity of the solution, separation and drying. With the aim of realizing industrialization, future research emphasis on the development of the sulfuric acid treatment process is proposed in this study.

Description: The contamination of sulfur emanating from pyrrhotite in magnetite concentrates has been a problem in iron ore processing. This study utilized froth flotation to float pyrrhotite away from magnetite using collectors of xanthate and dixanthogen. It was found that xanthate or dixanthogen alone could not achieve selective separation between pyrrhotite and magnetite in flotation. A high loss of magnetite was obtained with xanthate, while a low desulfurization degree was obtained with dixanthogen. It was interesting that a high desulfurization ratio was achieved with little loss of magnetite when xanthate was mixed with dixanthogen as the collector. The synergistic effect of the mixed collector on pyrrhotite was studied by electrokinectic studies and FTIR measurements. It was found that xanthate was the anchor on pyrrhotite and determined its selectivity against magnetite, while dixanthogen associated with xanthate, enhancing its hydrophobicity. This study provides new insights into the separation of iron minerals.

Description: The recovery of vanadium from a typical low-grade refractory stone coal was investigated using a pyro-hydrometallurgical process specifically including blank roasting, acid leaching, solvent extraction, and chemical precipitation. The appropriate role of parameters in each process was analyzed in detail. Roasting temperature and roasting time during the roasting process showed a significant effect on leaching efficiency of vanadium. Using H2SO4 as a leaching agent, vanadium leaching efficiency can achieve above 90% under the optimum leaching conditions of CaF2 dosage of 5%, sulfuric acid concentration of 4 mol/L, liquid to solid ratio of 2:1 mL/g, leaching time of 2 h, and leaching temperature of 95 °C. 99.10% of vanadium can be extracted from the leaching solution in three stages under the conditions of initial pH of 1.6, trioctylamine (TOA) extractant concentration of 20% (vol), phase ratio (A/O) of 2, and reaction time of 2 min. 1.0 mol/L NaOH was used to strip vanadium from the extracted solvent phase. After purification and precipitation, vanadium can be crystallized as ammonium metavanadate. The V2O5 product with a purity of 99.75% is obtained after ammonium metavanadate thermal decomposition at 550 °C for 2 h. The total vanadium recovery in the whole process is above 88%. This process has advantages of short operation time, high vanadium extraction efficiency, and high purity of the product.

Description: To study common failure characteristics of gateways, a total of 55 typical gateways at coal mines, in Sichuan Province, China, were selected for investigating the rules of broken widths based on the ground-penetrating radar (GPR) technique and numerical model. Results indicated that the broken width values around the gateways were larger than 1.5 m, and those in the roof and high side wall were larger than those in the low side wall, as a whole. The width values had close relationships with the thickness of the coal seam and immediate roof, angle of the coal seam, and depth of the gateways. Furthermore, combined with the plastic zone of numerical models in 3-Dimensional Distinct Element Code (3DEC) and the broken width, we obtained the excavation broken zone (EBZ) cross-section diagram for each gateway and determined that the EBZ appeared to have a basically elliptical shape—with the long axis along the seam inclination direction and the short axis along the vertical direction of the rock layer—and that this elliptical shape was only slightly affected by the gateway cross-section shape. It was observed that the failure extent was greater in the seam inclination direction than in the vertical direction of the rock layer. Obviously, the gateways presented asymmetric failure characteristics and implied that an asymmetric support system should be provided when using bolts, cables, and shotcrete combined with steel mesh and steel belts. Such a support system could improve material parameters and form a combined arch structure in surrounding rocks, with arch crown and arch springing thicknesses that are larger in the roof and high side wall.

Description: A novel staged leaching process has been reported in this paper to selectively extract vanadium from roasted stone coal and the mechanisms have been clarified. Results showed that the leaching efficiency of V, Al, P and Fe was 80.46%, 12.24%, 0.67% and 3.12%, respectively, under the optimum dilute sulfuric acid dephosphorization (DSAD)-two-stage pressure acid leaching (PAL) conditions. The efficient separation of V from Fe, Al and P was realized. As apatite could be leached more easily than mica, the apatite could completely react with sulfuric acid, while the mica had almost no change in the DSAD process, which was the key aspect in realizing the effective separation of V from P. Similarly, the hydrolyzation of Fe and Al could be initiated more easily than that of V by decreasing the residual acid of leachate. The alunite and iron-sulphate compound generated in the first-stage PAL process resulted in the effective separation of V from Fe and Al.

Description: This paper used the X-ray three-dimensional (3D) microscope and acquired, through CT scanning, the 3D data of the long-frame coal sample from the Daliuta Coal Mine. Then, the 3D datacube reconstructed from the coal’s CT scanning data was visualized with the use of Avizo, an advanced visualization software (FEI, Hillsboro, OR, USA). By means of a gray-scale segmentation technique, the model of the coal’s micro-pore structure was extracted from the object region, and the precise characterization was then conducted. Finally, the numerical simulation on the water seepage characteristics in the coal micro-pores model under the pressure of 3 MPa was performed on the CFX platform. Results show that the seepage of low-pressure water exhibited preference to the channels with large pore radii, short paths, and short distance from the outlet. The seepage pressure of low-pressure water decreased gradually along the seepage direction, while the seepage velocity of low-pressure water decreased gradually along the direction from the pore center to the wall. Regarding the single-channel seepage behaviors, the seepage velocity and mass flow rate of water seepage in the X direction were the largest, followed by the values of the seepage in the Y direction, and the seepage velocity and mass flow rate of water seepage in the Z direction were the smallest. Compared with the results in single-channel seepage, the dual-channel seepage in the direction of (X + Y) and the multi-channel seepage in the direction of (X + Y + Z) exhibited significant increases in the overall seepage velocity. The present study extends the application of 3D CT scanning data and provides a new idea and approach for exploring the seepage rules in coal micro-pore structures.

Description: Dissimilatory metal-reducing bacteria are ubiquitous in soils worldwide, possess the ability to transfer electrons outside of their cell membranes, and are capable of respiring with various metal oxides. Reduction of iron oxides is one of the more energetically favorable forms of anaerobic respiration, with a higher energy yield than both sulfate reduction and methanogenesis. As such, this process has significant implications for soil carbon balances, especially in the saturated, carbon-rich soils of the northern latitudes. However, the dynamics of these microbial processes within the context of the greater soil microbiome remain largely unstudied. Previously, we have demonstrated the capability of potentiostatically poised electrodes to mimic the redox potential of iron(III)- and humic acid-compounds and obtain a measure of metal-reducing respiration. Here, we extend this work by utilizing poised electrodes to provide an inexaustable electron acceptor for iron- and humic acid-reducing microbes, and by measuring the effects on both microbial community structure and greenhouse gas emissions. The application of both nonpoised and poised graphite electrodes in peat soils stimulated methane emissions by 15%–43% compared to soils without electrodes. Poised electrodes resulted in higher (13%–24%) methane emissions than the nonpoised electrodes. The stimulation of methane emissions for both nonpoised and poised electrodes correlated with the enrichment of proteobacteria, verrucomicrobia, and bacteroidetes. Here, we demonstrate a tool for precisely manipulating localized redox conditions in situ (via poised electrodes) and for connecting microbial community dynamics with larger ecosystem processes. This work provides a foundation for further studies examining the role of dissimilatory metal-reducing bacteria in global biogeochemical cycles.

Description: Tungsten mineralization in hydrothermal quartz veins from the Nyakabingo,Gifurwe and Bugarama deposits in central Rwanda occurs as the iron-rich endmember ofthe wolframite solid solution series (ferberite) and in the particular form of reinite, whichrepresents a pseudomorph of ferberite after scheelite. Primary ferberite, reinite and latesecondary ferberite are characterized by their trace element chemistry and rare earthelement patterns. The replacement of scheelite by ferberite is also documented in the traceelement composition. Primary ferberite shows high Mg, Zn, Sc, V, Nb, In and Snconcentrations, but very low Ca, Pb, Sr and Ba contents. Reinite and late secondaryferberite display an uncommon trace element composition containing high concentrationsof Ca, Pb, Sr, Ba, As and Ga, but very low levels in Sn, Zr, Hf, In, Ti, Sc, Nb, Ta, Mg andZn. Late secondary ferberite replacing primary ferberite is characterized by additionalenrichments in Bi, Pb, As and Sb. The rare earth element patterns of reinite and secondaryferberite are also similar to hydrothermal scheelite. The formation of the tungsten depositsin central Rwanda is interpreted to be epigenetic in origin, and the hydrothermalmineralizing fluids are related to the intrusion of the G4-granites.

Description: Rare Earths (RE) have been the focus of much attention in recent years as a consequence of a number of converging factors, prominent among which are: centralization of supply (in China), unique applications in high-end technologies particularly in the low-carbon energy industry, and global demand outstripping availability. Despite this focus, RE supply chain sustainability has not been examined in depth or in any systematic manner. This paper provides an initial review of RE sustainability considerations at present, including current initiatives to understand the research and development needs. The analysis highlights a broad range of areas needing consolidation with future research and calls for collaboration between industry and academia to understand the sustainability considerations of these critical elements in more depth.

Description: This paper investigates the potential of pristine and acid-treated olivine as a substrate for CO2 capture using a vacuum swing adsorption (VSA) process from the gas-solid phase. The experiments tested the isotherm of pure CO2 adsorption with partial pressure from 10−5 to 1 bar at ambient temperature. The CO2 adsorption capacity and actual expected working capacity (EWC) curves of pristine and acid-treated olivine were determined. Isotherm studies predict that physisorption dominates chemisorptions at ambient temperatures. The adsorption capacity enhances with the increase of specific surface area, pore volume, and the appearance of Mg complexed on the mineral’s surface. Actual EWC studies showed that acid-treated olivine is an adsorbent choice for the VSA process, due to enhanced CO2 adsorption capacities compared to olivine and the potential for 100% recovery of CO2 during the regeneration process. Pristine olivine is not suitable for the VSA process because of bad regenerability, but it can be used in capturing and sequestering dilute CO2 in process streams. Our research reveals excellent viability for the application of VSA in the area of CO2 capture using pristine olivine and acid-treated olivine.

Description: Naturally occurring radionuclides such as uranium, thorium and their decay products (226Ra, 222Rn) are present in a number of geological settings in Jordan. Motivated by the existence of uranium anomalies ‎coupled with its lack of conventional ‎‎energy ‎‎resources, Jordan decided that the development of ‎this indigenes ‎resource (uranium) is the first step in introducing nuclear power as part of its energy mix. Uranium deposits in Central Jordan were perceived not only as a secured resource that will ‎fulfill Jordan’s energy needs, but also as an economic asset that will ‎finance Jordan’s nuclear program. The average uranium concentration of 236 soil samples using ICP-Mass (inductively coupled plasma mass spectrometry) was found to be 109 parts per million (ppm). Results analysis revealed a wide range of 1066 ppm for uranium concentration, and a median of 41 ppm uranium. The measurements frequency distribution indicates that 72% of samples measured had a uranium content of less than 100 ppm, a concentration that characterizes overburden and tailings quality, rather than minable reserves. This paper presents and evaluates the concentration of uranium in central Jordan, being the most promising area with the highest radioactive anomalies in Jordan.

Description: In this study, chlorite is used to investigate the diagenetic-metamorphic evolution and accurate geological history of the different units belonging to the Karakaya complex, Turkey. Primary and secondary chlorite minerals in the very low-grade metamorphic rocks display interference colors of blue and brown and an appearance of optical isotropy. Chlorites are present in the matrix, pores, and/or rocks units as platy/flaky and partly radial forms. X-ray diffraction (XRD) data indicate that Mg-Fe chlorites with entirely IIb polytype (trioctahedral) exhibit a variety of compositions, such as brunsvigite-diabantite-chamosite. The major element contents and structural formulas of chlorite also suggest these were derived from both felsic and metabasic source rocks. Trace and rare earth element (REE) concentrations of chlorites increase with increasing grade of metamorphism, and these geochemical changes can be related to the tectonic structures, formational mechanics, and environments present during their generation.

Description: In this report, the vanadium recovery mechanisms by novel BaCO3/CaO composite additive roasting and acid leaching technology, including the phase transformations and the vanadium leaching kinetics, were studied. The purpose of this manuscript is to realize and improve the vanadium recovery from stone coal using BaCO3/CaO as the composite additive. The results indicated that during the composite additive BaCO3/CaO roasting process, the monoclinic crystalline structure of muscovite (K(Al,V)2[Si3AlO10](OH)2) was converted into the hexagonal crystalline structure of BaSi4O9 and the tetragonal crystalline structure of Gehlenite (Ca2Al2SiO7), which could, therefore, facilitate the release and extraction of vanadium. Vanadium in leaching residue was probably in the form of vanadate or pyrovanadate of barium and calcium, which were hardly extracted during the sulfuric acid leaching process. The vanadium leaching kinetic analysis indicated that the leaching process was controlled by the diffusion through a product layer. The apparent activation energy could be achieved as 46.51 kJ/mol. The reaction order with respect to the sulfuric acid concentration was 1.1059. The kinetic model of vanadium recovery from stone coal using novel composite additive BaCO3/CaO could be finally established.

Description: Underground coal gasification (UCG) is a promising option for the recovery of low-rank and inaccessible coal resources. Detailed mineralogical information is essential to understand underground reaction conditions far from the surface and optimize the operation parameters during the UCG process. It is also significant in identifying the environmental effects of UCG residue. In this paper, with regard to the underground gasification of lignite, UCG slag was prepared through simulation tests of oxygen-enriched gasification under different atmospheric conditions, and the minerals were identified by X-Ray diffraction (XRD) and a scanning electron microscope coupled to an energy-dispersive spectrometer (SEM-EDS). Thermodynamic calculations performed using FactSage 6.4 were used to help to understand the transformation of minerals. The results indicate that an increased oxygen concentration is beneficial to the reformation of mineral crystal after ash fusion and the resulting crystal structures of minerals also tend to be more orderly. The dominant minerals in 60%-O2 and 80%-O2 UCG slag include anorthite, pyroxene, and gehlenite, while amorphous substances almost disappear. In addition, with increasing oxygen content, mullite might react with the calcium oxide existed in the slag to generate anorthite, which could then serve as a calcium source for the formation of gehlenite. In 80%-O2 UCG slag, the iron-bearing mineral is transformed from sekaninaite to pyroxene.

Description: Fourteen samples of No. 6 coal seam were obtained from the Chuancaogedan Mine, Jungar Coalfield, Inner Mongolia, China. The samples were analyzed by optical microscopic observation, X-ray diffraction (XRD), scanning electron microscope equipped with an energy-dispersive X-ray spectrometer (SEM-EDS), inductively coupled plasma mass spectrometry (ICP-MS) and X-ray fluorescence spectrometry (XRF) methods. The minerals mainly consist of kaolinite, pyrite, quartz, and calcite. The results of XRF and ICP-MS analyses indicate that the No. 6 coals from Chuancaogedan Mine are higher in Al2O3, P2O5, Zn, Sr, Li, Ga, Zr, Gd, Hf, Pb, Th, and U contents, but have a lower SiO2/Al2O3 ratio, compared to common Chinese coals. The contents of Zn, Sr, Li, Ga, Zr, Gd, Hf, Pb, Th, and U are higher than those of world hard coals. The results of cluster analyses show that the most probable carrier of strontium in the coal is gorceixite; Lithium mainly occurs in clay minerals; gallium mainly occurs in inorganic association, including the clay minerals and diaspore; cadmium mainly occurs in sphalerite; and lead in the No. 6 coal may be associated with pyrite. Potentially valuable elements (e.g., Al, Li, and Ga) might be recovered as byproducts from coal ash. Other harmful elements (e.g., P, Pb, and U) may cause environmental impact during coal processing.

Description: Uranium (U) concentration and the activities of 238U, 234U, and 230Th were determined for groundwaters, spring waters, and lake water collected from the Shihongtan sandstone-hosted U ore district and in the surrounding area, NW China. The results show that the groundwaters from the oxidizing aquifer with high dissolved oxygen concentration (O2) and oxidation-reduction potential (Eh) are enriched in U. The high U concentration of groundwaters may be due to the interaction between these oxidizing groundwaters and U ore bodies, which would result in U that is not in secular equilibrium. Uranium is re-precipitated as uraninite on weathered surfaces and organic material, forming localized ore bodies in the sandstone-hosted aquifer. The 234U/238U, 230Th/234U, and 230Th/238U activity ratios (ARs) for most water samples show obvious deviations from secular equilibrium (0.27–2.86), indicating the presence of water-rock/ore interactions during the last 1.7 Ma and probably longer. The 234U/238U AR generally increases with decreasing U concentrations in the groundwaters, suggesting that mixing of two water sources may occur in the aquifer. This is consistent with the fact that most of the U ore bodies in the deposit have a tabular shape originati from mixing between a relatively saline fluid and a more rapidly flowing U-bearing meteoric water.

Description: As biominerals are good tracers of microbial interactions with the environment, they may provide signatures of microbial evolution and paleoenvironmental conditions. Since modern analogues of past environments help with defining proxies and biosignatures, we explored microbe mineral interactions in the water column of a maar lake, located in France: Lake Pavin. This lake is considered as a potential Precambrian ocean analogue, as it is ferruginous and meromictic, i.e., stratified with a superficial O2-rich layer (mixolimnion) and a deeper permanently anoxic layer (monimolimnion). We combined bulk chemical analyses of dissolved and particulate matter in combination with electron microscopy analyses of the particulate matter at different depths along the water column. The mineralogy changed along with water chemistry, and most of the minerals were intimately associated with microorganisms. Evolution of the redox conditions with depth leads to the successive precipitation of silica and carbonates, Mn-bearing, Fe-bearing and S-containing phases, with a predominance of phosphates in the monimolimnion. This scheme parallels the currently-assessed changes of microbial diversity with depth. The present results corroborate previous studies that suggested a strong influence of microbial activity on mineralogical diversity through extracellular and intracellular biomineralization. This paper reports detailed data on mineralogical profiles of the water column and encourages extended investigation of these processes.

Description: Coal and coal combustion byproducts can have significant concentrations of lanthanides (rare earth elements). Rare earths are vital in the production of modern electronics and optics, among other uses. Enrichment in coals may have been a function of a number of processes, with contributions from volcanic ash falls being among the most significant mechanisms. In this paper, we discuss some of the important coal-based deposits in China and the US and critique classification systems used to evaluate the relative value of the rare earth concentrations and the distribution of the elements within the coals and coal combustion byproducts.

Description: This paper reports the mineralogical compositions of super-low-sulfur (Yueliangtian 6-upper (YLT6U)) and high-sulfur (Yueliangtian 6-lower (YLT6L)) coals of the Late Permian No. 6 coal seam from the Yueliangtian coal mine, Guizhou, southwestern China. The mineral assemblages and morphology were detected and observed by X-ray diffractogram (XRD), optical microscopy and field-emission scanning electron microscope (FE-SEM) in conjunction with an energy-dispersive X-ray spectrometer. Major minerals in the coal samples, partings and host rocks (roof and floor strata) include calcite, quartz, kaolinite, mixed-layer illite/smectite, chlorite and pyrite and, to a lesser extent, chamosite, anatase and apatite. The Emeishan basalt and silicic rocks in the Kangdian Upland are the sediment source for the Yueliangtian coals. It was found that there are several modes of chamosite occurrence, and precursor minerals, such as anatase, had been corroded by Ti-rich hydrothermal solutions. The modes of occurrence of minerals present in the coal were controlled by the injection of different types of hydrothermal fluids during different deposition stages. The presence of abundant pyrite and extremely high total sulfur contents in the YLT6L coal are in sharp contrast to those in the YLT6U coal, suggesting that seawater invaded the peat swamp of the YLT6L coal and terminated at the YLT6U-9p sampling interval. High-temperature quartz, vermicular kaolinite and chloritized biotite were observed in the partings and roof strata. The three partings and floor strata of the No. 6 coal seam from the Yueliangtian coal mine appear to have been derived from felsic volcanic ash. Four factors, including sediment-source region, multi-stage injections of hydrothermal fluids, seawater influence and volcanic ash input, were responsible for the mineralogical characteristics of the Yueliangtian coals.

Description: Direct reduction is an emerging utilization technology of ferric bauxite. However, it requires much more sodium carbonate than ordinary bauxite does. The volatilization is one of the most significant parts of sodium carbonate consumption, as reported in previous studies. Based on the new direct reduction method for utilization of ferric bauxite, this paper has systematically investigated factors including heating temperature, heating time, and sodium carbonate dosage influencing sodium volatilization. For the purpose of reducing sodium volatilization, the Box–Benhken design was employed, and the possibility of separating iron and sodium after direct reduction was also investigated.

Description: In order to effectively raise both utilization rate and additional value of fly ash, X-Ray diffraction (XRD), scanning electron microscope (SEM) and energy-dispersive X-Ray spectrometer (EDS) were used to investigate the morphology, and chemical and mineral composition of the microspheres in fly ash from the Luohuang coal-fired power plant, Chongqing, southwestern China. The majority of fly ash particles are various types of microspheres, including porous microsphere, plerospheres (hollow microspheres surrounding sub-microspheres or mineral fragments) and magnetic ferrospheres. Maghemite (γ-Fe2O3) crystals with spinel octahedron structure regularly distribute on the surfaces of ferrospheres, which explained the source of their strong magnetism that would facilitate the separation and classification of these magnetic ferrospheres from the fly ash. Microspheres in Luohuang fly ash generally are characterized by an elemental transition through their cross-section: the inner layer consists of Si and O; the chemical component of the middle layer is Si, Al, Fe, Ti, Ca and O; and the Fe-O mass (maghemite or hematite) composes the outer layer (ferrosphere). Studies on composition and morphological characteristics of microspheres in fly ash would provide important information on the utilization of fly ash, especially in the field of materials.

Description: Limonitic laterite contains low iron and nickel grades and much high smelting minerals and loss on ignition (LOI), identified as refractory iron ore for sintering. Thus, sinter pot tests of limonitic laterite via pressurized densification sintering and its intensification mechanism were conducted, and the industrial application prospect was explored. The results indicate that the sintering performance of the limonitic laterite of the new process is significantly improved with the tumble index and productivity increased by 19.2% and 18.6%, respectively, and solid fuel rate lowered by 10.3%. The external pressure field promotes the synchronization of heat front velocity and combustion front velocity for better sintering heat and mass transfer conditions, which also greatly improves the mineral compositions and microstructure of the product sinter. The microstructure is converted from large thin-wall pores into small thin-wall or large thick-wall pores with the sinter porosity decreased by 42.4%. Much close interlocking texture between hercynite and silico-ferrite of calcium and alumina (SFCA) is formed with hercynite grains aggregation and growth, and SFCA amount substantially increased. The better sintering performance will bring about a remarkable economic benefit of 282.78 million RMB/a if the industrial application is implemented. The pressurized densification sintering process is considered as one of the effective technologies for improving limonitic laterite sintering.

Description: In this study, the optimum feed composition in autogenous tumbling of basalt waste-rock particles to clean their weathered surface was determined. The weathered surfaces of basalt are generally cut out consequent to extraction of basalt columns in quarry operations. The inefficiently cut out portions of basalt cause formation of huge quarry waste dumps causing visual pollution on roadsides. Mixtures of different particle size fractions of basalt waste-rock particles were experimented to achieve the optimum feed material composition. The minimum loss of commercially available basalt particles and maximum clear surface was intended. The results were compared with respect to weight loss (%) and reflectance values of used and generated samples.

Description: Certain Central Appalachian coals, most notably the Fire Clay coal with a REY-enriched volcanic ash fall tonstein, are known to be enriched in rare earth elements. The Fire Clay tonstein has a greater contribution to the total coal + parting REY than would be inferred from its thickness, accounting for about 20%–35% of the REY in the coal + parting sequence. Underground mining, in particular, might include roof and floor rock and the within-seam partings in the mined product. Beneficiation, necessary to meet utility specifications, will remove some of the REY from the delivered product. In at least one previously published example, even though the tonstein was not present in the Fire Clay coal, the coal was enriched in REY. In this case, as well as mines that ship run-of-mine products to the utility, the shipped REY content should be virtually the same as for the mined coal. At the power plant, however, the delivered coal will be pulverized, generally accompanied by the elimination of some of the harder rock, before it is fired into the boiler. Overall, there are a wide range of variables between the geologic sample at the mine and the power plant, any or all of which could impact the concentration of REY or other critical materials in the coal combustion products.

Description: Three quarters of the world’s phosphate deposits are of sedimentary origin and 75%–80% of those include carbonate gangue. In this study, carbonate sedimentary phosphate deposits of the Lar Mountains of southwest Iran are studied. These deposits consist mainly of calcite, fluorapatite, quartz, kaolinite and illite, with an average P2O5 grade of 9%–10% (low-grade). Various pre-processing and processing methods have been developed for concentrating low-grade phosphate up to marketable grade and this study aims to select the optimal method to produce an economically viable grade of phosphate concentrate from low-grade ore. Different concentration methods, including calcination and gravity separation, were applied on samples at both a laboratory and semi-industrial scale (pilot scale). Using an integrated method of calcination (performed in a rotary kiln) and shaking table for concentrating the low-grade phosphate ore, the results show promise at producing grades of 30.77% P2O5 with 60.7%–63.2% recovery.

Description: Coal roadway driving is an important part of the underground mining system, and very common in Chinese coal mines. However, the high concentration of respirable dust produced in the blasting operation poses a great hazard to miners’ health as well as the underground environment. In this paper, based on the direct simulation Monte Carlo method, the gas–solid two-phase flow model of particle movement is established to study the respirable dust distribution in blasting driving face. The results show that there is an obvious vortex region in which airflow velocity is lower than that close to the roadway wall and driving face. After blasting, respirable dust in the front of the dust group jet from the driving face cannot be discharged timely, with the result that its concentration is higher than the critical value until it is expelled from the roadway, whereas respirable dust concentration at the back of the dust group is gradually diluted and exhibits an alternate thin dense phase distribution. Meanwhile, respirable dust concentration in the breathing zone is relatively higher than that at the top and bottom of roadway. The accuracy of numerical simulation results is verified by field measurements. The research results are helpful for further understanding the evolution of respirable dust distribution after blasting, and are good for providing guidance for efficient controlling of respirable dust and improving the working environment for underground miners.

Description: Electric shovels are used in surface mining operations to achieve economic production capacities. The capital investments and operating costs associated with the shovels deployed in the Athabasca oil sands formation are high due to the abrasive conditions. The shovel crawler shoes interact with sharp and abrasive sand particles, and, thus, are subjected to high transient dynamic stresses. These high stresses cause wear and tear leading to crack initiation, propagation and premature fatigue failure. The objective of this paper is to develop a model to characterize the crawler stresses and deformation for the P&H 4100C BOSS during propel and loading using rigid-flexible multi-body dynamic theory. A 3-D virtual prototype model of the rigid-flexible crawler track assembly and its interactions with oil sand formation is simulated to capture the model dynamics within multibody dynamics software MSC ADAMS. The modal and stress shapes and modal loads due to machine weight for each flexible crawler shoes are generated from finite element analysis (FEA). The modal coordinates from the simulation are combined with mode and stress shapes using modal superposition method to calculate real-time stresses and deformation of flexible crawler shoes. The results show a maximum von Mises stress value of 170 MPa occurring in the driving crawler shoe during the propel motion. This study provides a foundation for the subsequent fatigue life analysis of crawler shoes for extending crawler service life.

Description: The rare bismuth oxychloride, bismoclite (BiOCl), has been identified in the weathered tourmaline–cemented, magmatic–hydrothermal breccia complex at the San Francisco de los Andes Bi–Cu–Au deposit, Argentina. A wide variety of supergene minerals were detected in the oxidized zone, but only preisingerite (Bi3(AsO4)2O(OH)) is intimately associated with bismoclite. Bismuth arsenate is present either as minor accessory phases or as traces in bismoclite-rich samples. This is the first documented occurrence of bismoclite in a porphyry-related, and magmatic–hydrothermal breccia pipe deposit. Bismoclite is interpreted to have formed by weathering of hypogene bismuthinite (Bi2S3), which originally occurred with arsenopyrite to cement the breccias. These appear to have reacted with O2- and HCl-bearing meteoric waters to produce pockets of supergene bismoclite–preisingerite assemblages. Bismoclite samples have been characterized by means of X-ray diffractometry (XRD), geochemistry, petrography, scanning electron microscopy (SEM), differential thermal analysis–thermogravimetry analysis (DTA–TGA) and infrared analysis (IR) providing useful insights and updated information regarding this rare bismuth oxychloride and associated arsenate mineral. The San Francisco de los Andes breccia complex shows similar geometry, morphology and internal organization as those found in traditional magmatic–hydrothermal breccias associated with Cu–Mo porphyry deposits. Bismoclite and preisingerite form due to the presence of hypogene Bi-bearing minerals followed by appropriate supergene conditions. These hypogene minerals commonly occur only as trace phases, or are entirely absent, in porphyry and related magmatic–hydrothermal breccia deposits. The scarcity of hypogene Bi–mineral phases in porphyry and related magmatic–hydrothermal breccia deposits is the main reason why bismoclite has not previously been reported in these types of deposits. The detection of bismoclite as a mineral phase in the oxidized zone of weathered deposits highlights hypogene Bi mineralization at depth, and associated metals. Bismoclite is an insoluble mineral of particular interest in those supergene profiles which have been completely leached out of distinctive, water-soluble phases, such as Cu sulfate minerals, which are diagnostic of Cu mineralization at depth. Consequently, bismoclite could potentially be the only indicator of hypogene and supergene mineralization in lower portions of a bismuth bearing ore deposit.

Description: Mine tailings are generally disposed of by artisanal and small scale gold miners in poorly constructed containment areas and this leads to environmental risk. Gold phytomining could be a possible option for tailings management at artisanal and small-scale gold mining (ASGM) locations where plants accumulate residual gold in their above ground biomass. The value of metal recovered from plants could offset some of the costs of environmental management. Getting gold into plants has been repeatedly demonstrated by many research groups; however, a simple working technology to get gold out of plants is less well described. A field experiment to assess the relevance of the technology to artisanal miners was conducted in Central Lombok, Indonesia between April and June 2015. Tobacco was planted in cyanidation tailings (1 mg/kg gold) and grown for 2.5 months before the entire plot area was irrigated with NaCN to induce metal uptake. Biomass was then harvested (100 kg), air dried, and ashed by miners in equipment currently used to ash activated carbon at the end of a cyanide leach circuit. Borax and silver as a collector metal were added to the tobacco ash and smelted at high temperature to extract metals from the ash. The mass of the final bullion (39 g) was greater than the mass of silver used as a collector (31 g), indicating recovery of metals from the biomass through the smelt process. The gold yield of this trial was low (1.2 mg/kg dry weight biomass concentration), indicating that considerable work must still be done to optimise valuable metal recovery by plants at the field scale. However, the described method to process the biomass was technically feasible, and represents a valid technique that artisanal and small-scale gold miners are willing to adopt if the economic case is good.

Description: The cement industry has the potential to become a major consumer of recycled waste materials that are transformed and recycled in various forms as aggregates and pozzolanic materials. These recycled waste materials would otherwise have been dumped in landfill sites, leaving hazardous elements to break down and contaminate the environment. There are several approaches for the reuse of these waste products, especially in relation to clay minerals that can induce pozzolanic reactions of special interest in the cement industry. In the present paper, scientific aspects are discussed in relation to several inert coal-mining wastes and their recycling as alternative sources of future eco-efficient pozzolans, based on activated phyllosilicates. The presence of kaolinite in this waste indicates that thermal treatment at 600 °C for 2 h transformed these minerals into a highly reactive metakaolinite over the first seven days of the pozzolanic reaction. Moreover, high contents of metakaolinite, together with silica and alumina sheet structures, assisted the appearance of layered double hydroxides through metastable phases, forming stratlingite throughout the main phase of the pozzolanic reaction after 28 days (as recommended by the European Standard) as the reaction proceeded.