ALBERT

Description: The Bohemian Massif (BM) is the largest coherent surface exposure of basement rocks in central Europe. It is a geodynamically active part of the Hercynian orogenic belt representing a collage of magmatic arcs and micro-continents caused by the collision of Laurasia (Laurentia-Baltica) and Africa (Gondwana). The general northwest direction of accretion is typical of the northern part of the Hercynian belt. Irregularly-shaped colliding blocks resulted in a very complicated structure of convergence, lithospheric subduction, and crustal shortening, followed by extensional processes and rifting. The western part of the Bohemian Massif is the well-known health and resort landscape of Bohemia, Saxonia, and Bavaria, with Karlovy Vary (Karlsbad) as the flagship of the famous spa towns of the region (Figure 1). Allegedly, the Emperor Charles IV founded the spa in the years 1347–1349 at the site, which was already well known for its hot springs. For centuries, 12 springs in Karlovy Vary ranging in temperatures between 42°C and 72°C have been exploited, especially for the treatment of digestive system disorders and metabolic diseases.

Description: We report about Self-Potential (SP) anomalies registered 150 m from the active lava dome of Merapi Volcano, which are associated with Ultra-Long-Period (ULP) seismic signals (periods 〉100 s). During a 5-month period of simultaneous SP and seismological measurements, 50 ULP events were detected seismologically. If SP time series corresponding to ULP events are aligned to the onset times of ULP-events and stacked, the resulting traces show anomalous SP with an amplitude of 5–20 mV/km and 40–60 min duration. In contrast, the anomalous signals were not present in ground temperature data nor in SP data recorded ≈1 km from the summit. SP anomalies associated with ULP-seismicity might be caused by electro-kinetic effect of fluid flow in subsurface. This result is consistent with the ULP-generation model based on seismological observations and adds new information towards the understanding of ULP-seismicity.

Description: As part of Project International Deep Profiling of Tibet and the Himalaya III, a 400-km-long, densely spaced array of 57 broadband and short-period seismic stations was deployed in central Tibet from August 1998 through May 1999. Although originally designed to image the lithosphere with teleseismic events, the array also recorded numerous local and regional seismic events. More than 900 local and regional events were detected on at least 10 stations during the 1-year deployment, and we were able to locate 267 local earthquakes. A substantial number of the events were found to cluster in or near large grabens and along known strike-slip faults, while other events show no obvious correlation with known structures. In addition to spatial clustering, at least one of the large clusters also exhibits temporal clustering that may be associated with magmatic or geothermal activity in the upper crust. The average Vp and Vs are estimated to be 5.85 and 3.35 km/sec for the upper crust and 7.0 and 3.9 km/sec for the lower crust, respectively. The 50 focal mechanisms computed from this set of events are consistent with north–south shortening and east–west extension; there are no clear indications of significant local perturbations in the regional stress field induced by the collision between India and Eurasia. The majority of the focal mechanisms indicate normal and strike-slip faulting. At least six of the newly computed focal mechanisms, however, indicate thrust faulting, which is a phenomenon not well documented previously. Ninety-nine percent of the local earthquakes have focal depths shallower than 25 km, and the locations of the few deeper events are poorly constrained. The shallow earthquake focal depths are consistent with high temperatures and proposed ductile or aseismic behavior in the middle to lower crust of central Tibet.

Description: Two fluid injection experiments were conducted at the German Continental Deep Drilling Site (KTB) in 1994 and 2000. Microseismicity occurred at different depth intervals. Hypocenter locations were precisely localized. Here, microseismicity is analyzed in terms of its spatio-temporal evolution characteristics. An approach is applied which assumes microseismicity to be triggered by a diffusive process of pore pressure relaxation. The method yields estimates of hydraulic parameters of rocks on large spatial scales. At the KTB site the method enables us to study hydraulic diffusivity at two different depth intervals. We observe significant variations in the evolution characteristics of the seismic activity at different depths. Estimates of hydraulic diffusivity for shallower parts of the crust seem to be much smaller than for deeper regions. To understand reasons for this, we have analyzed spatial relations of hypocenter locations to the distribution of intensities of seismic reflections. Low values of hydraulic diffusivity correlate with low reflection intensities and high diffusivities with large intensities, respectively. The analysis confirms the hypothesis that the process of pore pressure relaxation along pre-existing and critically stressed natural fractures is an important triggering factor for induced microseismicity.

Description: The large-scale POLONAISE'97 seismic experiment investigated the velocity structure of the crust and upper mantle in the Trans-European suture zone (TESZ) region between the Precambrian east European craton (EEC) and Paleozoic platform that comprises terranes added during the Caledonian and Variscan orogenies (530–370 and 370–225 Ma, respectively). This experiment included 64 shots recorded by 613 seismic stations during two deployments. Very good quality data were recorded along five profiles, and the longest and most important one (P4) is the focus of this paper. Clear first arrivals and later phases of waves reflected/refracted in the crust and Moho were interpreted using two-dimensional (2-D) tomographic inversion and ray-tracing techniques. The crustal thickness along the profile varies from 30–35 km in the Paleozoic platform area to ∼40 km below and due northeast of the TESZ, to ∼43 km in the Polish part of the EEC, and to ∼50 km in Lithuania. The Paleozoic platform and EEC are divided by the Polish basin, so the upper crustal structure varies considerably. In the area of the Polish basin, the P wave velocity is very low (V P 〈 6.1 km/s) down to depths of 15–20 km, indicating that a very thick sedimentary sequence is present. We suggest two possible tectonic interpretations of the velocity models: (1) Baltica indented Avalonia, obducting its upper crust and underthrusting its lower crust in a tectonic flake structure and (2) a rifted margin of Baltica underlies the Polish basin. This model is similar to other interpretations of seismic profiles recorded in the Baltic Sea. The second model implies that the Paleozoic platform solely consists of Avalonian lithosphere and the EEC of Baltica lithosphere. It offers a simple explanation of the difference in crustal thickness of the two platforms. It also implies that the Caledonian and Variscan orogenies in this area were relatively “soft” collisions that left this continental margin largely intact.

Description: Late Miocene to Quaternary volcanic rocks from the frontal arc to the back-arc region of the Central Volcanic Zone in the Andes show a wide range of δ11B values (+4 to −7 ‰) and boron concentrations (6 to 60 ppm). Positive δ11B values of samples from the volcanic front indicate involvement of a 11B-enriched slab component, most likely derived from altered oceanic crust, despite the thick Andean continental lithosphere, and rule out a pure crust-mantle origin for these lavas. The δ11B values and boron concentrations in the lavas decrease with increasing depth of the Wadati-Benioff Zone. This across-arc variation in δ11B values and decreasing B/Nb ratios from the arc to the back-arc samples are attributed to the combined effects of boron-isotope fractionation during progressive dehydration in the slab and a steady decrease in slab-fluid flux toward the back arc, coupled with a relatively constant degree of crustal contamination as indicated by similar Sr, Nd and Pb isotope ratios in all samples. Three-component mixing calculations for slab-derived fluid, the mantle wedge and the continental crust based on B, Sr and Nd isotope data indicate that the slab-fluid component dominates the boron composition of the fertile mantle and that the primary arc magmas were contaminated by an average addition of 15 to 30% crustal material. Modeling of fluid-mineral boron-isotope fractionation as a function of temperature shows that dehydration reactions liberate continuously changing fluid compositions from the slab during progressive subduction. A combination of a boron-isotope fractionation model and a temperature model for the Central Andean subduction zone fits the across-arc variation in δ11B and we conclude that the boron-isotope composition of arc volcanic rocks, especially in island arcs, is dominated by changing δ11B-composition of boron-rich slab-fluids during progressive dehydration. Owing to the decrease in slab-derived fluid flux crustal contamination becomes more important toward the back-arc. Because of the boron-isotope fractionation effect, across-arc variations in δ11B need not necessarily reflect different mixing proportions between boron derived from the slab-fluid and the mantle wedge.

Description: Using data of two GPS campaigns as well as two ERS-1/2 Single Look Complex (SLC) datasets, we studied the distribution of co-seismic and post-earthquake surface deformation of the major (moment magnitude Mw=8.1) Antofagasta (Chile) event of 30 July 1995. Earthquake-related fault dimensions and inter-seismic surface deformation patterns were achieved by comparing results from the GPS and interferometric Synthetic Aperture Radar (SAR) investigations and by applying interpretative forward dislocation modelling. SAR data post-dating the major earthquake suggest a change in deformation directions after the earthquake within the first 50–80 km normal to the Chilean coast and show opposite signs when comparing results of the western part of the study area with those of the eastern part. We propose that this change in direction might be indicative of a superposition of relatively rapid post-seismic slip along a deeper section of the fault zone and/or distributed relaxation of the lower crust/upper mantle and seismic loading along the coastal part of the fore-arc. Assuming that the Antofagasta earthquake ruptured the entire seismogenic interface, we used the derived depth distribution of the interplate fault for the estimation of seismic moment rates. Taking into account the rate and size distribution of teleseismic events from the USGS and recently derived plate convergence rates, we constrained the size of the maximum earthquake and approximated the apparent recurrence intervals of events similar to the Antofagasta event in the area.

Description: To understand the evolution of the Alpine orogen, knowledge of the actual structure of the lithosphere-asthenosphere system is important. We perform high-resolution teleseismic tomography with manually picked P wave arrival times from seismograms recorded in the greater Alpine region. The resulting data set consists of 4199 relative P wave arrivals and 499 absolute P wave arrivals from 76 teleseismic events, corrected for the contribution of the Alpine crust to the travel times. The three-dimensional (3-D) crustal model established from controlled-source seismology data for that purpose represents the large-scale Alpine crustal structure. Absolute P wave arrival times are used to compute an initial reference model for the inversion. Tests with synthetic data document that the combination of nonlinear inversion, high-quality teleseismic data, and usage of an a priori 3-D crustal model allows a reliable resolution of cells at 50 km × 50 km × 30 km. Hence structures as small as two cells can be resolved in the upper mantle. Our tomographic images illuminate the structure of the uppermost mantle to depth of 400 km. Along strike of the Alps, the inversion reveals a high-velocity structure that dips toward the SE beneath the Adriatic microplate in the western and central Alps. In the eastern Alps we observe a northeastward dipping feature, subducting beneath the European plate. We interpret this feature in the western and central Alps as subducted, mainly continental European lower lithosphere. For the east, we propose that parts of the Vardar oceanic basin were subducted toward the NE, forcing continental Adriatic lower lithosphere to subduct northeastward beneath the European plate.

Description: Group and phase velocities of fundamental mode Rayleigh waves, in the period range of 10 to 70 s, are obtained for southern and northern Tibet. Significant variations in crustal velocity structure are found. The group velocity minimum for Tibet occurs at ∼33 s and the minimum is ∼0.12 km/s lower for southern Tibet than for northern Tibet. At periods greater than 50 s, however, group velocities are up to 0.2 km/s faster in southern Tibet. The group and phase velocities are inverted for layered S wave models. The dispersion observations in southern Tibet can only be fit with a low-velocity layer in the middle crust. In contrast, the velocity models for northern Tibet do not require any low-velocity zone in the crust. The S wave velocity of the lower crust of southern Tibet is ∼0.2 km/s faster than the lower crust of northern Tibet. In southern Tibet the sub-Moho velocity increases with a positive gradient that is similar to a shield, while there is no velocity gradient beneath northern Tibet. The high-velocity lower crust of southern Tibet is consistent with the underthrusting of Indian continental lithosphere. The most plausible explanation of the mid-crustal low velocity zone is the presence of crustal melt resulting from H2O-saturated melting of the interplate shear zone between the underthrusting Indian crust and overflowing Asian crust. The lack of a pronounced crustal low-velocity zone in northern Tibet is an indication of a relatively dry crust. The low S wave velocity in the lower crust of northern Tibet is interpreted to be due to a combination of compositional differences, high temperatures, presumably caused by a high mantle heat flux, and possibly small amounts of partial melt. Combined with all available observations in Tibet, the new surface wave results are consistent with a hot and weak upper mantle beneath northern Tibet.

Description: Two passive seismic experiments have been carried out across the Trans European Suture Zone (TESZ) from northern Germany to southern Sweden (TOR) and across the Proterozoic-Archaean suture in Finland (SVEKALAPKO) to improve our understanding of the processes involved in the creation of the European continent. Teleseismic earthquakes recorded by the studies of the crust-mantle, and upper mantle seismic discontinuities with the receiver function method. Along the TOR network the depth to the Moho increases from 30 km at the southern edge of the profile to 40 km at the Elbe Line. Between the Elbe Line and TESZ the Moho branches off and whereas the deeper branch continues at 40 km depth to the TESZ a second branch appears at 30.35 km depth. The upper branch descends north of the TESZ to below 55 km under the northern end of the TOR profile. The crustal thickening north of the TESZ is accompanied by an increase in average Vp/Vs values, appearance of intracrustal conversion zones and north dipping features which we interpret as remnants of the subduction and subsequent collision between Avalonia and Baltica. In southern Finland beneath the SVEKALAPKO network the Moho starts in the south at the depth of 40-45 km, plunges to about 65 km depth south of the Archaean-Proterozoic suture. This deepening of the Moho is coincident with a north dipping intracrustal structure apparently related to the subduction and collision and of the Proterozoic and Archaean provinces in Proterozoic. North of the line of the suture the Moho rises smoothly to 45-50 km depth in the Archaean province. Along the TOR profile, 410 and 660 discontinuities were hard to detect. However, manyfold stacking of receiver functions revealed that the conversions from the two discontinuities arrive more or less accordingto IASP91 predicted time. Across the SVEKALAPKO network 410 and 660 discontinuities arrive markedly earlier than IASP91 theoretical arrival times. In particular north of the Archaean-Proterozoic suture in Finland the 410 and 660 km conversions arrive about 2s earlier, indicating about 5 per cent higher average upper mantle velocities and lower temperatures than what IASP91 global model predicts. Test

Description: We consider various cases of seismicity, induced by artificial fluid injections in boreholes. Like many other authors, we support the hypothesis that to a large extent the triggering of this seismicity is caused by a diffusive process of the pore pressure relaxation in porous (or fractured), saturated rocks. We show that if this hypothesis is correct, then the spatio-temporal distributions of the seismic events must have several specific features related to the effective permeability of the rock. As a rule the fluid injection-induced seismicity obeys such features. These features can be indications of the diffusive and even hydraulic nature of the seismicity triggering process.¶From this point of view we analyze the spatio-temporal distribution of the late aftershocks of the Antofagasta (northern Chile) 1995 earthquake. These aftershocks were concentrated in a plane, an approximately 3 km-thick spatial zone. This thin seismogenic layer is a part of the South American subduction zone. The time-distance distribution of the aftershocks along this layer indicates that they could be triggered by a diffusion-like process. Possibly, such a process is the relaxation of the pressure perturbation caused in the pore fluid by the main Antofagasta event. We estimated the permeability required to explain the spatio-temporal distribution of the aftershocks by such a triggering mechanism. The obtained value, 60 mD, is very large. However, it is realistic for a long-time existing and large-scale fault zone.

Description: The GLATIS project (Greenland Lithosphere Analysed Teleseismically on the Ice Sheet) with collaborators has operated a total of 16 temporary broadband seismographs for periods from 3 months to 2 years distributed over much of Greenland from late 1999 to the present. The very first results are presented in this paper, where receiver-function analysis has been used to map the depth to Moho in a large region where crustal thicknesses were previously completely unknown. The results suggest that the Proterozoic part of central Greenland consists of two distinct blocks with different depths to Moho. North of the Archean core in southern Greenland is a zone of very thick Proterozoic crust with an average depth to Moho close to 48 km. Further to the north the Proterozoic crust thins to 37–42 km. We suggest that the boundary between thick and thin crust forms the boundary between the geologically defined Nagssugtoqidian and Rinkian mobile belts, which thus can be viewed as two blocks, based on the large difference in depth to Moho (over 6 km). Depth to Moho on the Archean crust is around 40 km. Four of the stations are placed in the interior of Greenland on the ice sheet, where we find the data quality excellent, but receiver-function analyses are complicated by strong converted phases generated at the base of the ice sheet, which in some places is more than 3 km thick.

Description: We study the azimuthal velocity variation of Pg waves in the Bohemian Massif using data collected during Central European Lithospheric Experiment Based on Refraction (CELEBRATION) 2000. We analyze travel times of waves generated by 28 shots and recorded by 256 portable and 19 permanent seismic stations deployed on the territory of the Czech Republic and in adjacent areas. We use recording offset ranging from 30 to 190 km with azimuths covering the whole interval of angles. The observed travel times are inverted for parameters of a velocity model formed by an isotropic low-velocity subsurface layer with a varying depth lying on a homogeneous transversely isotropic half-space with a horizontal axis of symmetry. The recovered velocity displays a systematic azimuthal variation indicating a regional-scale intrinsic or effective anisotropy in the Bohemian Massif. The mean, minimum and maximum values of the velocity are vmean = 6.03 km/s, vmin = 5.98 km/s, vmax = 6.10 km/s, respectively, indicating an anisotropy of 1.5–2.5%. The direction of the maximum propagation velocity is ∼N35°E being approximately perpendicular to the present maximum compression in the Earth crust in central Europe. The observed anisotropy cannot be induced by stress-aligned cracks in the crust, because the crack models predict azimuthal velocity variations completely inconsistent with the observed one. Therefore we suggest the crustal anisotropy to be induced by a preferred orientation of rock-forming minerals and large-scale intrusion fabrics developed during a tectonic evolution of the Bohemian Massif.

Description: During the VARNET-96 seismic experiment three seismic refraction/wide-angle reflection profiles were acquired in order to examine the crustal structure in the southwest of Ireland. A total of 170 seismic stations were used on 300 recording sites. The shotpoint geometry was designed to allow for inline and offline fan shot recordings on the three profiles, using a total of 34 shots. Results from 3-D ray-trace and inversion modelling illustrate the pervasive lateral heterogeneity of the crust south of the Shannon Estuary. About 5 km of interpreted Palaeozoic sediment at the south coast was associated with the sedimentary infill of the Munster and South Munster Basins. This sedimentary layer, which thins to approximately 2 km in the northern Munster Basin, is significantly thinner than previously estimated from geological field studies. High-velocity zones beneath Dingle Bay and the Kenmare River region may be associated with the deep traces of the Killarney–Mallow Fault Zone and the Cork–Kenmare line. A zone of high-velocity upper crust (6.4–6.6 km s−1) beneath the South Munster Basin is found in the area between the Kenmare–Killarney and the Leinster Granite gravity lows. The depth to the Moho varies from approximately 28–29 km at the south coast to approximately 32–33 km in the Dingle–Shannon Basin. The interpretation of the 2-D and 3-D velocity models suggests that Variscan deformation is confined to sedimentary and upper crustal structures in the southwest of Ireland.

Description: After a gap of nearly two decades since the Magsat mission in 1980, the dedicated low-orbit potential field mission CHAMP is now in the third of its seven year mission. Already, the new magnetic total intensity and vector data have yielded maps of the global crustal field of unprecedented accuracy and resolution. Here, we assess the value of these maps to infer deep crustal structure of regions overlain by younger cover. A GIS based modelling technique has been developed to model the various geological units of the continents starting from the geological map of the world. Depending upon the known rock types of the region, they are assigned a standard susceptibility value and using the global seismic crustal structure, a vertically integrated susceptibility (VIS) model is computed at each point of the region. Starting with this initial VIS model, the vertical field anomaly is computed at a satellite altitude of 400 km and compared with the corresponding CHAMP vertical field anomaly map. The first comparison is carried out against a model using the lateral extent of a cratonic region as given by published tectonic maps. In the subsequent modelling step, depending upon the extent of the observed anomaly pattern of that region, the surface geology is extended beneath the sediments until the recomputed map fits the observed magnetic anomaly map. Here, we focus on modelling results for the selected few provinces of the world where the initial model does not agree with the observed anomaly map. Similar modelling of CHAMP satellite magnetic anomalies can constrain the subsurface structure hidden by Phanerozoic cover in many parts of the world.

Description: The 9.1 km deep KTB (Kontinentale Tiefbohrung, Germany) drilling hole is one of the best investigated deep-drilling sites in the world. Among other parameters, in situ measurements revealed continuous profiles of principal stresses, pore fluid pressure and fracture geometry in the vicinity of the borehole. The present study combines these parameters with hydraulic and seismicity data obtained during fluid-injection experiments conducted at the KTB to derive a conceptual model for fluid-injection-induced seismicity at the KTB. This model rests on the well constrained assumptions that (1) the crust is highly fractured with a permeable fracture network between 9 km depth and the Earth's surface and (2) the crust is in near-failure equilibrium, whereby a large number of fracture planes are under near-critical condition. During the injection experiment, the elevated pore fluid pressure remained well below the least principal stress and thus was too small to cause hydraulic opening of existing fractures. Consequently, the geometry of the fracture network was assumed to have not changed during fluid injection with induced seismicity occurring solely as a result of lowering of the effective normal stress, consistent with observed source mechanisms. The key parameter in the present model is the fracture permeability, which exhibits large spatial and directional variations. These variations are proposed to primarily control fluid migration paths and associated propagation of elevated fluid pressure during fluid injection. In contrast with common models based on isotropic fluid diffusion or spatially averaged permeability, highly permeable branches of the fracture network strongly affect the propagation of fluid pressure and prohibit the concept of a smooth ‘pressure front’. We find evidence that major fluid flow exists at comparatively low fluid pressure (below the critical pressure required to cause seismic failure) without being detected seismically. This might also explain the difference between 1011 J of hydraulic energy inserted into the system during fluid injection and ∼108 J of seismic energy: a major part of the hydraulic energy might be converted to potential energy of the ground water level caused by upward migrating fluid. From the fluid level response to changes of injection rate observed in a second borehole we estimate fluid signal velocities to be as large as 300 m d−1. Importantly, the suggested model also accounts for the occurrence of repeating earthquakes (multiplets), a large number of which were observed during the injection experiment. The present model also suggests that coseismic changes of the stress field caused by tectonic shear stress release are very local and of small magnitude. This is consistent with the observation that none of the larger induced events is followed by aftershock series that would be expected if coseismic processes had noticeably perturbed the local stress field.

Description: Assessment of contributions from shallow lithosphere to teleseismic wave front distortion is a prerequisite for high-resolution regional teleseismic tomography. Several methods have been proposed in the past for the correction of these effects, e.g. application of station correction terms. We propose an approach that is independent of the subsequent inversion and uses the available a priori knowledge of the crustal structure to calculate crustal traveltime effects of teleseismic wave fronts. Our approach involves the construction of a 3-D crustal model based on controlled source seismology data and calculation of the associated traveltime anomalies for incoming teleseismic wave fronts. The model for central Fennoscandia shows a maximum crustal thickness of 64 km and includes a high-velocity lower crust as derived for parts of the study area by previous authors. Traveltimes calculated using finite differences for teleseismic waves travelling through this crustal model are compared with those from the standard reference model IASP91 and the residuals are used to correct observed teleseismic arrival times at the SVEKALAPKO array. To test the performance of this approach, in a second part of the study a synthetic traveltime data set is obtained by tracing wave fronts through a mantle structure with known velocity anomalies and the 3-D crustal model. This data set is inverted with and without correction for crustal effects. The 3-D crustal effects alone with a homogeneous mantle are also inverted and the results show that the crustal effects propagate down to 450 km. The comparison of the inversion results demonstrates the need to apply appropriate 3-D crustal corrections in high-resolution regional tomography for upper-mantle structure beneath the Baltic Shield.

Description: This paper describes the analysis of built-up areas using fully polarimetric interferometric SAR data at L-band. This approach uses a polarimetric interferometric segmentation to determine the number of dominant scattering mechanisms required by an interferometric phase estimation using ESPRIT method.

Description: A Databank was created using data from 25 local catalogues and 30 special studies of earthquakes in central, northern and northwestern Europe. Event types were discriminated, fake events and duplets eliminated, and different magnitudes and intensities converted to Mw. The conversions require the establishment of regression equations. The Catalogue contains tectonic events from the Databank within the area 44°N-72°N, 25°W-32°E and the time period 1300-1993 which have Mw magnitudes of 3.50 and larger. The area is covered by different polygons. Within each polygon only data from one or a small number of the local catalogues, supplemented by data from special studies, enter the Catalogue. If there are two or more such catalogues or studies providing a solution for an event, a priority algorithm selects one entry for the Catalogue. Then Mw is calculated from one of the magnitude types, or from macroseismic data, given by the selected entry according to another priority scheme. The origin time, location, Mw magnitude and reference are specified for each entry of the Catalogue. So is the epicentral intensity, I0, if provided by the original source. Following these criteria, a total of about 5,000 earthquakes constitute the Catalogue. Although originally derived for the purpose of seismic hazard calculation within GSHAP, the Catalogue provides a data base for many types of seismicity and seismic hazard studies.

Description: Polar motion data is available from the mid-19th century to the present. Based on time series with a variety of sampling intervals (monthly, 0.05-year, 5-day and daily), we have separated the low-frequency terms by low-pass filtering and the Chandler and annual terms by recursive band-pass filtering of the pole coordinates. Using a simple unweighted least-squares fit to the filtered low-frequency terms, the linear trends of the rotation pole were estimated. Assessing the estimates based on intercomparisons, the most reliable trend estimate was found. Using a Fast Fourier Transform, we have computed the prograde, retrograde and total amplitude spectra of the low-frequency part of polar motion in order to reveal the long-periodic signals. The characteristics and time evolution of the Chandler and annual wobbles are described by changes in their parameters (radii, directions and period lengths) over one century.

Description: This report describes the set-up, logistics and results of the CHICAGO (Chilean Coastal AeroGeophysical Observations) survey. It gives a short overview about the scientific intentions, detailed documentation of all technical aspects starting from the survey equipment via the aircraft installation to the GPS stations set-up and the experiences in flight. All processing results for the individual profiles are discussed in detail. Finally, the data is compared and combined with available recent marine gravity data and altimetry derived solutions.

Description: The LaCoste & Romberg gravity meter S124b and its associated system environment were installed and tested in conjunction with a strap-down gravity meter system (SAGS) of the Bayerische Akademie der Wissenschaften in Munich on a Cessna Grand Caravan of the DLR in Oberpfaffenhofen. This report describes the design and instrumentation of the aerogravimetry system, it documents the installation on the aircraft and it discusses some of the results of the test flights performed within AGFA (Airborne Gravity Flight Approach). Beyond the documentation of the system this report gives a short introduction to the basics of the instruments including a short theory of their operation and data processing. The intention is to give readers from disciplines other than aero-gravimetry and aero-altimetry a technical insight into how the system works and what it is capable of. This should help the reader to evaluate the systems usefulness in other geo-scientific projects. The experiences from the test flights are briefly summarized and an update of the current status and future plans for the individual instruments is given. The aerogravimetry system consists of two major instrument blocks: the gravimetry sensing system and the positioning system. The gravimetry sensors are the LaCoste & Romberg S124b and the SAGS-2.2 systems. The navigation block holds GPS receivers, an inertial navigation system and a laser altimeter. The aircraft used for the primary tests was a Cessna Grand Caravan of the DLR in Oberpfaffenhofen. It offers superb conditions for scientific installations and is widely used in geophysical exploration all over the world. The test flights were flown from Oberpfaffenhofen airport. One profile covers the Bavarian Alps to map short wavelength, topography induced gravity disturbances, and another flight crosses the Rhine Graben to map long wavelength structures of the deeper crust. The software for data processing for navigation, gravimetry and geoid calculations is briefly summarized.

Description: The Altiplano represents a key region of the Central Andes, where the interplay between faults and syn-tectonic sediments allow the reconstruction of the kinematic evolution of the Central Andean high plateau. This study aims, by the use of incrementally-balanced crosssections, interpretation of reflection-seismic profiles, 3D strain analysis, gravity data interpretation, isotopic-age dating, and surface observations, to reconstruct the geological and tectonic history of the Southern Altiplano at 21o S between the Eastern and the Western Cordillera. The Southern Altiplano is a complex intramontane basin with 6-8km Cenozoic fill. It can be structurally divided in three domains; the Eastern, Central, and Western Altiplano. 2D balanced cross-sections based on seismic-reflector analysis and field observations show that the Eastern Altiplano is the buried, thin-skinned deformation front of the western part of the Eastern Cordillera's bivergent thrust system. The 20-40° dipping, blind faults merge into a shallow, eastward-dipping detachment at 7-9km depth that continues into the Eastern Cordillera. The Central Altiplano forms a bivergent system with 30-90° dipping, basement-involving thrusts in the east, and fault-propagation folds in the west. The shallow, westward-dipping detachment lies at 9-10km depth and possibly continues into the Western Altiplano, which forms a separate bivergent thrust-system.The computer-aided (GeoSec and 2DMove), incremental restoration of the balanced crosssections of the Eastern and Central Altiplano, and preliminary line-length balancing of the Western Altiplano, yields 38km shortening due to folding and thrusting. 3D strain analysis of sandstone grain shapes reveals that an additional 7.7% of shortening was accumulated as ductile, micro-scale strain. This increases the total shortening in the entire cross-section of the Southern Altiplano at 21° S to 60km or 21%. In addition, I suggest that the contribution of outcrop-scale structures possibly accounts for another 20 km. 3D strain analysis further shows that the 7.7% of microscale strain were accompanied by 13% orogen-parallel extension. These shortening estimates more than double the published shortening values from the Altiplano. Crustal thickening and plateau uplift in the arc-backarc domain of the South American convergent margin took place during the Cenozoic. K-Ar and Ar-Ar age-dating on syn-tectonic sediments, together with seismic-sequence analysis, demonstrates that the Southern Altiplano structure formed during two independent compressional increments (Early Oligocene [〉27 Ma] and Middle/Late Miocene [17-8 Ma]), which were preceded by an Eocene/Oligocene extensional event that led to the formation of a half graben in the Central, and possibly a second in the Eastern Altiplano. Horizontal contraction of the Altiplano ended between 11-8 Ma, was indicated by the age of undeformed volcanic rocks. Detailed seismic analysis of single syn-tectonic basins combined with isotopic ages of syntectonic sediments, reveal a complex deformation history characterised by spatially and temporally irregular fault activation, which excludes the existence of large-scale eastward or westward propagating deformation during plateau formation. This diffuse pattern of deformation was characteristic for the entire plateau domain, i.e. from the western flank to the eastern edge of the Eastern Cordillera, during a first stage of plateau formation between 30 and 10 Ma. This possibly indicates that the plateau has remained flat since its formation and did not evolve from an initially doubly-vergent orogen. The syn-tectonic stratigraphic units of the Southern Altiplano domain overlie shallow marine, Late Cretaceous sediments that still form a sub-horizontal regional near sea level. This indicates that plateau surface-uplift in this part of the plateau was mainly achieved by sedimentary in fill of tectonically-controlled, internally-drained basins, and not by tectonic uplift. The tectonic evolution of the Southern Altiplano was largely accompanied by magmatic activity. An episode of strong volcanic activity affected the entire width of the Altiplano and adjacent parts of the Eastern Cordillera between 25-8 Ma. However, a causal relationship between magmatism and deformation could not be shown for the Southern Altiplano. Strong Oligocene/Miocene volcanic activity, together with the diffuse pattern of deformation, suggests that the formation of the Altiplano Plateau was initiated by magmatically-controlled thermal weakening of the crust, possibly as the result of the removal of the mantle lithosphere. At present, the Altiplano has a flat topography, high heat-flow, and is spatially related to a variety of geophysical anomalies that are interpreted as partial melting of the middle crust (20-40km depth). From this evidence, I propose that the process of plateau formation is still active.

Description: Economy-wide material flow analysis (MFA) and derived indicators have been developed to monitor and assess the metabolic performance of economies, that is, with respect to the internal economic flows and the exchange of materials with the environment and with other economies. Indicators such as direct material input (DMI) and direct material consumption (DMC) measure material use related to either production or consumption. Domestic hidden flows (HF) account for unused domestic extraction, and foreign HF represent the upstream primary resource requirements of the imports. DMI and domestic and foreign HF account for the total material requirement (TMR) of an economy. Subtracting the exports and their HF provides the total material consumption (TMC). DMI and TMR are used to measure the (de-) coupling of resource use and economic growth, providing the basis for resource efficiency indicators. Accounting for TMR allows detection of shifts from domestic to foreign resource requirements. Net addition to stock (NAS) measures the physical growth of an economy. It indicates the distance from flow equilibrium of inputs and outputs that may be regarded as a necessary condition of a sustainable mature metabolism. We discuss the extent to which MFA-based indicators can also be used to assess the environmental performance. For that purpose we consider different impacts of material flows, and different scales and perspectives of the analysis, and distinguish between turnover-based indicators of generic environmental pressure and impact-based indicators of specific environmental pressure. Indicators such as TMR and TMC are regarded as generic pressure indicators that may not be used to indicate specific environmental impacts. The TMR of industrial countries is discussed with respect to the question of whether volume and composition may be regarded as unsustainable.

Description: The reductionist trend of equating sustainable development with sustained economic growth needs to be reversed. New accounts and balances help to operationalize the elusive notion of sustainability: they provide a coherent picture of the interaction between environment and economy. "Greened" national accounts measure economic sustainability in terms of (produced and natural) capital maintenance; balances of material flows assess ecological sustainability as the dematerialization of production and consumption. Both concepts aim to preserve environmental assets, but differ in scope, strength and evaluation of sustainability. First results for Germany indicate weak sustainability of the economy; strong sustainability is not in sight because of insufficient reduction of material throughput. Attaining sustainability through integrated policies needs the support of share- and stakeholders of sustainable development.

Description: Energy labelling for household appliances has become an established instrument to promote energy efficiency. For heating systems, however, this approach has not been successfully implemented yet. This is partially due to the reluctance of industry. To find ways to motivate industry to participate in a labelling scheme, we carried out a survey among producers of heating systems. Respondents to our questionnaire and personal interviews cover together more than 30 percent of the EU market for heating systems. Thus the results provide a solid basis for conclusions. Our survey helps to draw a much better picture of the attitudes and expectations of the manufacturers with regard to a labelling scheme. The paper covers: Attitudes regarding potential effects of a label; Opinions on possible design of a label; Perceived effects of the labels for the companies; Perceived advantages and disadvantages of a label; And, as a conclusion, the potential effects on the companies and their probable relevance. As a result, industry representatives expect that customers will be able to make sounder purchasing decisions because of the availability of a label. Therefore they believe that energy savings will be achieved. What is more, respondents expect that a label could improve integration of the European market for heating systems and would rather improve their individual economic performance. The survey results in a clearer identification of industry's problems, needs and interests. It thus will help policy-makers to get industry to support energy efficiency labels and activities.

Description: This report includes the results and calculations of the HP case study within the Digital Europe project. This case study investigates the environmental effects of mobile computing devices as an element of the growing ICT infrastructure for applications such as ecommerce, egovernment and telework. Specifically, the resource intensity of a notebook computer and a handheld device will be analysed and discussed.

Description: This report presents the calculations and findings as well as the resulting recommendations from the Barclays Plc case study within the Digital Europe project. Chapter 2 gives the background to the case study; chapter 3 investigates the environmental aspects; and chapter 4 highlights social aspects of different banking scenarios. Chapter 5 outlines future scenarios in the sector and chapter 6 finally makes recommendations for business and government.